1 files changed, 23 insertions, 35 deletions

diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index ff7de40b6e35..65335b268fa9 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -37,9 +37,6 @@
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(adm1026);
-
 static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
                                 -1, -1, -1, -1, -1, -1, -1, -1 };
 static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
@@ -293,7 +290,7 @@ struct adm1026_data {
 
 static int adm1026_probe(struct i2c_client *client,
                          const struct i2c_device_id *id);
-static int adm1026_detect(struct i2c_client *client, int kind,
+static int adm1026_detect(struct i2c_client *client,
                           struct i2c_board_info *info);
 static int adm1026_remove(struct i2c_client *client);
 static int adm1026_read_value(struct i2c_client *client, u8 reg);
@@ -305,7 +302,7 @@ static void adm1026_init_client(struct i2c_client *client);
 
 
 static const struct i2c_device_id adm1026_id[] = {
-        { "adm1026", adm1026 },
+        { "adm1026", 0 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, adm1026_id);
@@ -319,7 +316,7 @@ static struct i2c_driver adm1026_driver = {
         .remove         = adm1026_remove,
         .id_table       = adm1026_id,
         .detect         = adm1026_detect,
-        .address_data   = &addr_data,
+        .address_list   = normal_i2c,
 };
 
 static int adm1026_read_value(struct i2c_client *client, u8 reg)
@@ -1650,7 +1647,7 @@ static const struct attribute_group adm1026_group_in8_9 = {
 };
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int adm1026_detect(struct i2c_client *client, int kind,
+static int adm1026_detect(struct i2c_client *client,
                           struct i2c_board_info *info)
 {
         struct i2c_adapter *adapter = client->adapter;
@@ -1672,35 +1669,26 @@ static int adm1026_detect(struct i2c_client *client, int kind,
                 i2c_adapter_id(client->adapter), client->addr,
                 company, verstep);
 
-        /* If auto-detecting, Determine the chip type. */
-        if (kind <= 0) {
-                dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x "
-                        "...\n", i2c_adapter_id(adapter), address);
-                if (company == ADM1026_COMPANY_ANALOG_DEV
-                    && verstep == ADM1026_VERSTEP_ADM1026) {
-                        kind = adm1026;
-                } else if (company == ADM1026_COMPANY_ANALOG_DEV
-                        && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
-                        dev_err(&adapter->dev, "Unrecognized stepping "
-                                "0x%02x. Defaulting to ADM1026.\n", verstep);
-                        kind = adm1026;
-                } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
-                        dev_err(&adapter->dev, "Found version/stepping "
-                                "0x%02x. Assuming generic ADM1026.\n",
-                                verstep);
-                        kind = any_chip;
-                } else {
-                        dev_dbg(&adapter->dev, "Autodetection failed\n");
-                        /* Not an ADM1026 ... */
-                        if (kind == 0) { /* User used force=x,y */
-                                dev_err(&adapter->dev, "Generic ADM1026 not "
-                                        "found at %d,0x%02x.  Try "
-                                        "force_adm1026.\n",
-                                        i2c_adapter_id(adapter), address);
-                        }
-                        return -ENODEV;
-                }
+        /* Determine the chip type. */
+        dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x...\n",
+                i2c_adapter_id(adapter), address);
+        if (company == ADM1026_COMPANY_ANALOG_DEV
+            && verstep == ADM1026_VERSTEP_ADM1026) {
+                /* Analog Devices ADM1026 */
+        } else if (company == ADM1026_COMPANY_ANALOG_DEV
+                && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+                dev_err(&adapter->dev, "Unrecognized stepping "
+                        "0x%02x. Defaulting to ADM1026.\n", verstep);
+        } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+                dev_err(&adapter->dev, "Found version/stepping "
+                        "0x%02x. Assuming generic ADM1026.\n",
+                        verstep);
+        } else {
+                dev_dbg(&adapter->dev, "Autodetection failed\n");
+                /* Not an ADM1026... */
+                return -ENODEV;
         }
+
         strlcpy(info->type, "adm1026", I2C_NAME_SIZE);
 
         return 0;