diff options
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 7 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/stmpe-gpio.c | 399 |
3 files changed, 407 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f623953b5797..510aa2054544 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig | |||
@@ -206,6 +206,13 @@ config GPIO_SX150X | |||
206 | 8 bits: sx1508q | 206 | 8 bits: sx1508q |
207 | 16 bits: sx1509q | 207 | 16 bits: sx1509q |
208 | 208 | ||
209 | config GPIO_STMPE | ||
210 | bool "STMPE GPIOs" | ||
211 | depends on MFD_STMPE | ||
212 | help | ||
213 | This enables support for the GPIOs found on the STMPE I/O | ||
214 | Expanders. | ||
215 | |||
209 | config GPIO_TC35892 | 216 | config GPIO_TC35892 |
210 | bool "TC35892 GPIOs" | 217 | bool "TC35892 GPIOs" |
211 | depends on MFD_TC35892 | 218 | depends on MFD_TC35892 |
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index a69e0609ff7f..fc6019d93720 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile | |||
@@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o | |||
20 | obj-$(CONFIG_GPIO_PCA953X) += pca953x.o | 20 | obj-$(CONFIG_GPIO_PCA953X) += pca953x.o |
21 | obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o | 21 | obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o |
22 | obj-$(CONFIG_GPIO_PL061) += pl061.o | 22 | obj-$(CONFIG_GPIO_PL061) += pl061.o |
23 | obj-$(CONFIG_GPIO_STMPE) += stmpe-gpio.o | ||
23 | obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o | 24 | obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o |
24 | obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o | 25 | obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o |
25 | obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o | 26 | obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o |
diff --git a/drivers/gpio/stmpe-gpio.c b/drivers/gpio/stmpe-gpio.c new file mode 100644 index 000000000000..4e1f1b9d5e67 --- /dev/null +++ b/drivers/gpio/stmpe-gpio.c | |||
@@ -0,0 +1,399 @@ | |||
1 | /* | ||
2 | * Copyright (C) ST-Ericsson SA 2010 | ||
3 | * | ||
4 | * License Terms: GNU General Public License, version 2 | ||
5 | * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson | ||
6 | */ | ||
7 | |||
8 | #include <linux/module.h> | ||
9 | #include <linux/init.h> | ||
10 | #include <linux/platform_device.h> | ||
11 | #include <linux/slab.h> | ||
12 | #include <linux/gpio.h> | ||
13 | #include <linux/irq.h> | ||
14 | #include <linux/interrupt.h> | ||
15 | #include <linux/mfd/stmpe.h> | ||
16 | |||
17 | /* | ||
18 | * These registers are modified under the irq bus lock and cached to avoid | ||
19 | * unnecessary writes in bus_sync_unlock. | ||
20 | */ | ||
21 | enum { REG_RE, REG_FE, REG_IE }; | ||
22 | |||
23 | #define CACHE_NR_REGS 3 | ||
24 | #define CACHE_NR_BANKS (STMPE_NR_GPIOS / 8) | ||
25 | |||
26 | struct stmpe_gpio { | ||
27 | struct gpio_chip chip; | ||
28 | struct stmpe *stmpe; | ||
29 | struct device *dev; | ||
30 | struct mutex irq_lock; | ||
31 | |||
32 | int irq_base; | ||
33 | |||
34 | /* Caches of interrupt control registers for bus_lock */ | ||
35 | u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; | ||
36 | u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; | ||
37 | }; | ||
38 | |||
39 | static inline struct stmpe_gpio *to_stmpe_gpio(struct gpio_chip *chip) | ||
40 | { | ||
41 | return container_of(chip, struct stmpe_gpio, chip); | ||
42 | } | ||
43 | |||
44 | static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) | ||
45 | { | ||
46 | struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); | ||
47 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
48 | u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8); | ||
49 | u8 mask = 1 << (offset % 8); | ||
50 | int ret; | ||
51 | |||
52 | ret = stmpe_reg_read(stmpe, reg); | ||
53 | if (ret < 0) | ||
54 | return ret; | ||
55 | |||
56 | return ret & mask; | ||
57 | } | ||
58 | |||
59 | static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) | ||
60 | { | ||
61 | struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); | ||
62 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
63 | int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; | ||
64 | u8 reg = stmpe->regs[which] - (offset / 8); | ||
65 | u8 mask = 1 << (offset % 8); | ||
66 | |||
67 | stmpe_reg_write(stmpe, reg, mask); | ||
68 | } | ||
69 | |||
70 | static int stmpe_gpio_direction_output(struct gpio_chip *chip, | ||
71 | unsigned offset, int val) | ||
72 | { | ||
73 | struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); | ||
74 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
75 | u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); | ||
76 | u8 mask = 1 << (offset % 8); | ||
77 | |||
78 | stmpe_gpio_set(chip, offset, val); | ||
79 | |||
80 | return stmpe_set_bits(stmpe, reg, mask, mask); | ||
81 | } | ||
82 | |||
83 | static int stmpe_gpio_direction_input(struct gpio_chip *chip, | ||
84 | unsigned offset) | ||
85 | { | ||
86 | struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); | ||
87 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
88 | u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); | ||
89 | u8 mask = 1 << (offset % 8); | ||
90 | |||
91 | return stmpe_set_bits(stmpe, reg, mask, 0); | ||
92 | } | ||
93 | |||
94 | static int stmpe_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | ||
95 | { | ||
96 | struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); | ||
97 | |||
98 | return stmpe_gpio->irq_base + offset; | ||
99 | } | ||
100 | |||
101 | static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) | ||
102 | { | ||
103 | struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); | ||
104 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
105 | |||
106 | return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO); | ||
107 | } | ||
108 | |||
109 | static struct gpio_chip template_chip = { | ||
110 | .label = "stmpe", | ||
111 | .owner = THIS_MODULE, | ||
112 | .direction_input = stmpe_gpio_direction_input, | ||
113 | .get = stmpe_gpio_get, | ||
114 | .direction_output = stmpe_gpio_direction_output, | ||
115 | .set = stmpe_gpio_set, | ||
116 | .to_irq = stmpe_gpio_to_irq, | ||
117 | .request = stmpe_gpio_request, | ||
118 | .can_sleep = 1, | ||
119 | }; | ||
120 | |||
121 | static int stmpe_gpio_irq_set_type(unsigned int irq, unsigned int type) | ||
122 | { | ||
123 | struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); | ||
124 | int offset = irq - stmpe_gpio->irq_base; | ||
125 | int regoffset = offset / 8; | ||
126 | int mask = 1 << (offset % 8); | ||
127 | |||
128 | if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH) | ||
129 | return -EINVAL; | ||
130 | |||
131 | if (type == IRQ_TYPE_EDGE_RISING) | ||
132 | stmpe_gpio->regs[REG_RE][regoffset] |= mask; | ||
133 | else | ||
134 | stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; | ||
135 | |||
136 | if (type == IRQ_TYPE_EDGE_FALLING) | ||
137 | stmpe_gpio->regs[REG_FE][regoffset] |= mask; | ||
138 | else | ||
139 | stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; | ||
140 | |||
141 | return 0; | ||
142 | } | ||
143 | |||
144 | static void stmpe_gpio_irq_lock(unsigned int irq) | ||
145 | { | ||
146 | struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); | ||
147 | |||
148 | mutex_lock(&stmpe_gpio->irq_lock); | ||
149 | } | ||
150 | |||
151 | static void stmpe_gpio_irq_sync_unlock(unsigned int irq) | ||
152 | { | ||
153 | struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); | ||
154 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
155 | int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); | ||
156 | static const u8 regmap[] = { | ||
157 | [REG_RE] = STMPE_IDX_GPRER_LSB, | ||
158 | [REG_FE] = STMPE_IDX_GPFER_LSB, | ||
159 | [REG_IE] = STMPE_IDX_IEGPIOR_LSB, | ||
160 | }; | ||
161 | int i, j; | ||
162 | |||
163 | for (i = 0; i < CACHE_NR_REGS; i++) { | ||
164 | for (j = 0; j < num_banks; j++) { | ||
165 | u8 old = stmpe_gpio->oldregs[i][j]; | ||
166 | u8 new = stmpe_gpio->regs[i][j]; | ||
167 | |||
168 | if (new == old) | ||
169 | continue; | ||
170 | |||
171 | stmpe_gpio->oldregs[i][j] = new; | ||
172 | stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new); | ||
173 | } | ||
174 | } | ||
175 | |||
176 | mutex_unlock(&stmpe_gpio->irq_lock); | ||
177 | } | ||
178 | |||
179 | static void stmpe_gpio_irq_mask(unsigned int irq) | ||
180 | { | ||
181 | struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); | ||
182 | int offset = irq - stmpe_gpio->irq_base; | ||
183 | int regoffset = offset / 8; | ||
184 | int mask = 1 << (offset % 8); | ||
185 | |||
186 | stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; | ||
187 | } | ||
188 | |||
189 | static void stmpe_gpio_irq_unmask(unsigned int irq) | ||
190 | { | ||
191 | struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); | ||
192 | int offset = irq - stmpe_gpio->irq_base; | ||
193 | int regoffset = offset / 8; | ||
194 | int mask = 1 << (offset % 8); | ||
195 | |||
196 | stmpe_gpio->regs[REG_IE][regoffset] |= mask; | ||
197 | } | ||
198 | |||
199 | static struct irq_chip stmpe_gpio_irq_chip = { | ||
200 | .name = "stmpe-gpio", | ||
201 | .bus_lock = stmpe_gpio_irq_lock, | ||
202 | .bus_sync_unlock = stmpe_gpio_irq_sync_unlock, | ||
203 | .mask = stmpe_gpio_irq_mask, | ||
204 | .unmask = stmpe_gpio_irq_unmask, | ||
205 | .set_type = stmpe_gpio_irq_set_type, | ||
206 | }; | ||
207 | |||
208 | static irqreturn_t stmpe_gpio_irq(int irq, void *dev) | ||
209 | { | ||
210 | struct stmpe_gpio *stmpe_gpio = dev; | ||
211 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
212 | u8 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; | ||
213 | int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); | ||
214 | u8 status[num_banks]; | ||
215 | int ret; | ||
216 | int i; | ||
217 | |||
218 | ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); | ||
219 | if (ret < 0) | ||
220 | return IRQ_NONE; | ||
221 | |||
222 | for (i = 0; i < num_banks; i++) { | ||
223 | int bank = num_banks - i - 1; | ||
224 | unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; | ||
225 | unsigned int stat = status[i]; | ||
226 | |||
227 | stat &= enabled; | ||
228 | if (!stat) | ||
229 | continue; | ||
230 | |||
231 | while (stat) { | ||
232 | int bit = __ffs(stat); | ||
233 | int line = bank * 8 + bit; | ||
234 | |||
235 | handle_nested_irq(stmpe_gpio->irq_base + line); | ||
236 | stat &= ~(1 << bit); | ||
237 | } | ||
238 | |||
239 | stmpe_reg_write(stmpe, statmsbreg + i, status[i]); | ||
240 | stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, | ||
241 | status[i]); | ||
242 | } | ||
243 | |||
244 | return IRQ_HANDLED; | ||
245 | } | ||
246 | |||
247 | static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio) | ||
248 | { | ||
249 | int base = stmpe_gpio->irq_base; | ||
250 | int irq; | ||
251 | |||
252 | for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) { | ||
253 | set_irq_chip_data(irq, stmpe_gpio); | ||
254 | set_irq_chip_and_handler(irq, &stmpe_gpio_irq_chip, | ||
255 | handle_simple_irq); | ||
256 | set_irq_nested_thread(irq, 1); | ||
257 | #ifdef CONFIG_ARM | ||
258 | set_irq_flags(irq, IRQF_VALID); | ||
259 | #else | ||
260 | set_irq_noprobe(irq); | ||
261 | #endif | ||
262 | } | ||
263 | |||
264 | return 0; | ||
265 | } | ||
266 | |||
267 | static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio) | ||
268 | { | ||
269 | int base = stmpe_gpio->irq_base; | ||
270 | int irq; | ||
271 | |||
272 | for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) { | ||
273 | #ifdef CONFIG_ARM | ||
274 | set_irq_flags(irq, 0); | ||
275 | #endif | ||
276 | set_irq_chip_and_handler(irq, NULL, NULL); | ||
277 | set_irq_chip_data(irq, NULL); | ||
278 | } | ||
279 | } | ||
280 | |||
281 | static int __devinit stmpe_gpio_probe(struct platform_device *pdev) | ||
282 | { | ||
283 | struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); | ||
284 | struct stmpe_gpio_platform_data *pdata; | ||
285 | struct stmpe_gpio *stmpe_gpio; | ||
286 | int ret; | ||
287 | int irq; | ||
288 | |||
289 | pdata = stmpe->pdata->gpio; | ||
290 | if (!pdata) | ||
291 | return -ENODEV; | ||
292 | |||
293 | irq = platform_get_irq(pdev, 0); | ||
294 | if (irq < 0) | ||
295 | return irq; | ||
296 | |||
297 | stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL); | ||
298 | if (!stmpe_gpio) | ||
299 | return -ENOMEM; | ||
300 | |||
301 | mutex_init(&stmpe_gpio->irq_lock); | ||
302 | |||
303 | stmpe_gpio->dev = &pdev->dev; | ||
304 | stmpe_gpio->stmpe = stmpe; | ||
305 | |||
306 | stmpe_gpio->chip = template_chip; | ||
307 | stmpe_gpio->chip.ngpio = stmpe->num_gpios; | ||
308 | stmpe_gpio->chip.dev = &pdev->dev; | ||
309 | stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1; | ||
310 | |||
311 | stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); | ||
312 | |||
313 | ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); | ||
314 | if (ret) | ||
315 | return ret; | ||
316 | |||
317 | ret = stmpe_gpio_irq_init(stmpe_gpio); | ||
318 | if (ret) | ||
319 | goto out_free; | ||
320 | |||
321 | ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT, | ||
322 | "stmpe-gpio", stmpe_gpio); | ||
323 | if (ret) { | ||
324 | dev_err(&pdev->dev, "unable to get irq: %d\n", ret); | ||
325 | goto out_removeirq; | ||
326 | } | ||
327 | |||
328 | ret = gpiochip_add(&stmpe_gpio->chip); | ||
329 | if (ret) { | ||
330 | dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); | ||
331 | goto out_freeirq; | ||
332 | } | ||
333 | |||
334 | if (pdata && pdata->setup) | ||
335 | pdata->setup(stmpe, stmpe_gpio->chip.base); | ||
336 | |||
337 | platform_set_drvdata(pdev, stmpe_gpio); | ||
338 | |||
339 | return 0; | ||
340 | |||
341 | out_freeirq: | ||
342 | free_irq(irq, stmpe_gpio); | ||
343 | out_removeirq: | ||
344 | stmpe_gpio_irq_remove(stmpe_gpio); | ||
345 | out_free: | ||
346 | kfree(stmpe_gpio); | ||
347 | return ret; | ||
348 | } | ||
349 | |||
350 | static int __devexit stmpe_gpio_remove(struct platform_device *pdev) | ||
351 | { | ||
352 | struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev); | ||
353 | struct stmpe *stmpe = stmpe_gpio->stmpe; | ||
354 | struct stmpe_gpio_platform_data *pdata = stmpe->pdata->gpio; | ||
355 | int irq = platform_get_irq(pdev, 0); | ||
356 | int ret; | ||
357 | |||
358 | if (pdata && pdata->remove) | ||
359 | pdata->remove(stmpe, stmpe_gpio->chip.base); | ||
360 | |||
361 | ret = gpiochip_remove(&stmpe_gpio->chip); | ||
362 | if (ret < 0) { | ||
363 | dev_err(stmpe_gpio->dev, | ||
364 | "unable to remove gpiochip: %d\n", ret); | ||
365 | return ret; | ||
366 | } | ||
367 | |||
368 | stmpe_disable(stmpe, STMPE_BLOCK_GPIO); | ||
369 | |||
370 | free_irq(irq, stmpe_gpio); | ||
371 | stmpe_gpio_irq_remove(stmpe_gpio); | ||
372 | platform_set_drvdata(pdev, NULL); | ||
373 | kfree(stmpe_gpio); | ||
374 | |||
375 | return 0; | ||
376 | } | ||
377 | |||
378 | static struct platform_driver stmpe_gpio_driver = { | ||
379 | .driver.name = "stmpe-gpio", | ||
380 | .driver.owner = THIS_MODULE, | ||
381 | .probe = stmpe_gpio_probe, | ||
382 | .remove = __devexit_p(stmpe_gpio_remove), | ||
383 | }; | ||
384 | |||
385 | static int __init stmpe_gpio_init(void) | ||
386 | { | ||
387 | return platform_driver_register(&stmpe_gpio_driver); | ||
388 | } | ||
389 | subsys_initcall(stmpe_gpio_init); | ||
390 | |||
391 | static void __exit stmpe_gpio_exit(void) | ||
392 | { | ||
393 | platform_driver_unregister(&stmpe_gpio_driver); | ||
394 | } | ||
395 | module_exit(stmpe_gpio_exit); | ||
396 | |||
397 | MODULE_LICENSE("GPL v2"); | ||
398 | MODULE_DESCRIPTION("STMPExxxx GPIO driver"); | ||
399 | MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); | ||