diff options
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/gpio-omap.c | 1106 |
1 files changed, 461 insertions, 645 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0b0562979171..f49bd6f47a50 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c | |||
@@ -21,6 +21,7 @@ | |||
21 | #include <linux/io.h> | 21 | #include <linux/io.h> |
22 | #include <linux/slab.h> | 22 | #include <linux/slab.h> |
23 | #include <linux/pm_runtime.h> | 23 | #include <linux/pm_runtime.h> |
24 | #include <linux/pm.h> | ||
24 | 25 | ||
25 | #include <mach/hardware.h> | 26 | #include <mach/hardware.h> |
26 | #include <asm/irq.h> | 27 | #include <asm/irq.h> |
@@ -28,19 +29,36 @@ | |||
28 | #include <asm/gpio.h> | 29 | #include <asm/gpio.h> |
29 | #include <asm/mach/irq.h> | 30 | #include <asm/mach/irq.h> |
30 | 31 | ||
32 | #define OFF_MODE 1 | ||
33 | |||
34 | static LIST_HEAD(omap_gpio_list); | ||
35 | |||
36 | struct gpio_regs { | ||
37 | u32 irqenable1; | ||
38 | u32 irqenable2; | ||
39 | u32 wake_en; | ||
40 | u32 ctrl; | ||
41 | u32 oe; | ||
42 | u32 leveldetect0; | ||
43 | u32 leveldetect1; | ||
44 | u32 risingdetect; | ||
45 | u32 fallingdetect; | ||
46 | u32 dataout; | ||
47 | u32 debounce; | ||
48 | u32 debounce_en; | ||
49 | }; | ||
50 | |||
31 | struct gpio_bank { | 51 | struct gpio_bank { |
52 | struct list_head node; | ||
32 | unsigned long pbase; | 53 | unsigned long pbase; |
33 | void __iomem *base; | 54 | void __iomem *base; |
34 | u16 irq; | 55 | u16 irq; |
35 | u16 virtual_irq_start; | 56 | u16 virtual_irq_start; |
36 | int method; | ||
37 | u32 suspend_wakeup; | 57 | u32 suspend_wakeup; |
38 | #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) | ||
39 | u32 saved_wakeup; | 58 | u32 saved_wakeup; |
40 | #endif | ||
41 | u32 non_wakeup_gpios; | 59 | u32 non_wakeup_gpios; |
42 | u32 enabled_non_wakeup_gpios; | 60 | u32 enabled_non_wakeup_gpios; |
43 | 61 | struct gpio_regs context; | |
44 | u32 saved_datain; | 62 | u32 saved_datain; |
45 | u32 saved_fallingdetect; | 63 | u32 saved_fallingdetect; |
46 | u32 saved_risingdetect; | 64 | u32 saved_risingdetect; |
@@ -51,44 +69,27 @@ struct gpio_bank { | |||
51 | struct clk *dbck; | 69 | struct clk *dbck; |
52 | u32 mod_usage; | 70 | u32 mod_usage; |
53 | u32 dbck_enable_mask; | 71 | u32 dbck_enable_mask; |
72 | bool dbck_enabled; | ||
54 | struct device *dev; | 73 | struct device *dev; |
74 | bool is_mpuio; | ||
55 | bool dbck_flag; | 75 | bool dbck_flag; |
76 | bool loses_context; | ||
56 | int stride; | 77 | int stride; |
57 | u32 width; | 78 | u32 width; |
79 | int context_loss_count; | ||
80 | u16 id; | ||
81 | int power_mode; | ||
82 | bool workaround_enabled; | ||
58 | 83 | ||
59 | void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable); | 84 | void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable); |
85 | int (*get_context_loss_count)(struct device *dev); | ||
60 | 86 | ||
61 | struct omap_gpio_reg_offs *regs; | 87 | struct omap_gpio_reg_offs *regs; |
62 | }; | 88 | }; |
63 | 89 | ||
64 | #ifdef CONFIG_ARCH_OMAP3 | ||
65 | struct omap3_gpio_regs { | ||
66 | u32 irqenable1; | ||
67 | u32 irqenable2; | ||
68 | u32 wake_en; | ||
69 | u32 ctrl; | ||
70 | u32 oe; | ||
71 | u32 leveldetect0; | ||
72 | u32 leveldetect1; | ||
73 | u32 risingdetect; | ||
74 | u32 fallingdetect; | ||
75 | u32 dataout; | ||
76 | }; | ||
77 | |||
78 | static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; | ||
79 | #endif | ||
80 | |||
81 | /* | ||
82 | * TODO: Cleanup gpio_bank usage as it is having information | ||
83 | * related to all instances of the device | ||
84 | */ | ||
85 | static struct gpio_bank *gpio_bank; | ||
86 | |||
87 | /* TODO: Analyze removing gpio_bank_count usage from driver code */ | ||
88 | int gpio_bank_count; | ||
89 | |||
90 | #define GPIO_INDEX(bank, gpio) (gpio % bank->width) | 90 | #define GPIO_INDEX(bank, gpio) (gpio % bank->width) |
91 | #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) | 91 | #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) |
92 | #define GPIO_MOD_CTRL_BIT BIT(0) | ||
92 | 93 | ||
93 | static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) | 94 | static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) |
94 | { | 95 | { |
@@ -102,6 +103,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) | |||
102 | else | 103 | else |
103 | l &= ~(1 << gpio); | 104 | l &= ~(1 << gpio); |
104 | __raw_writel(l, reg); | 105 | __raw_writel(l, reg); |
106 | bank->context.oe = l; | ||
105 | } | 107 | } |
106 | 108 | ||
107 | 109 | ||
@@ -132,6 +134,7 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable) | |||
132 | else | 134 | else |
133 | l &= ~gpio_bit; | 135 | l &= ~gpio_bit; |
134 | __raw_writel(l, reg); | 136 | __raw_writel(l, reg); |
137 | bank->context.dataout = l; | ||
135 | } | 138 | } |
136 | 139 | ||
137 | static int _get_gpio_datain(struct gpio_bank *bank, int gpio) | 140 | static int _get_gpio_datain(struct gpio_bank *bank, int gpio) |
@@ -160,6 +163,22 @@ static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) | |||
160 | __raw_writel(l, base + reg); | 163 | __raw_writel(l, base + reg); |
161 | } | 164 | } |
162 | 165 | ||
166 | static inline void _gpio_dbck_enable(struct gpio_bank *bank) | ||
167 | { | ||
168 | if (bank->dbck_enable_mask && !bank->dbck_enabled) { | ||
169 | clk_enable(bank->dbck); | ||
170 | bank->dbck_enabled = true; | ||
171 | } | ||
172 | } | ||
173 | |||
174 | static inline void _gpio_dbck_disable(struct gpio_bank *bank) | ||
175 | { | ||
176 | if (bank->dbck_enable_mask && bank->dbck_enabled) { | ||
177 | clk_disable(bank->dbck); | ||
178 | bank->dbck_enabled = false; | ||
179 | } | ||
180 | } | ||
181 | |||
163 | /** | 182 | /** |
164 | * _set_gpio_debounce - low level gpio debounce time | 183 | * _set_gpio_debounce - low level gpio debounce time |
165 | * @bank: the gpio bank we're acting upon | 184 | * @bank: the gpio bank we're acting upon |
@@ -188,70 +207,74 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, | |||
188 | 207 | ||
189 | l = GPIO_BIT(bank, gpio); | 208 | l = GPIO_BIT(bank, gpio); |
190 | 209 | ||
210 | clk_enable(bank->dbck); | ||
191 | reg = bank->base + bank->regs->debounce; | 211 | reg = bank->base + bank->regs->debounce; |
192 | __raw_writel(debounce, reg); | 212 | __raw_writel(debounce, reg); |
193 | 213 | ||
194 | reg = bank->base + bank->regs->debounce_en; | 214 | reg = bank->base + bank->regs->debounce_en; |
195 | val = __raw_readl(reg); | 215 | val = __raw_readl(reg); |
196 | 216 | ||
197 | if (debounce) { | 217 | if (debounce) |
198 | val |= l; | 218 | val |= l; |
199 | clk_enable(bank->dbck); | 219 | else |
200 | } else { | ||
201 | val &= ~l; | 220 | val &= ~l; |
202 | clk_disable(bank->dbck); | ||
203 | } | ||
204 | bank->dbck_enable_mask = val; | 221 | bank->dbck_enable_mask = val; |
205 | 222 | ||
206 | __raw_writel(val, reg); | 223 | __raw_writel(val, reg); |
224 | clk_disable(bank->dbck); | ||
225 | /* | ||
226 | * Enable debounce clock per module. | ||
227 | * This call is mandatory because in omap_gpio_request() when | ||
228 | * *_runtime_get_sync() is called, _gpio_dbck_enable() within | ||
229 | * runtime callbck fails to turn on dbck because dbck_enable_mask | ||
230 | * used within _gpio_dbck_enable() is still not initialized at | ||
231 | * that point. Therefore we have to enable dbck here. | ||
232 | */ | ||
233 | _gpio_dbck_enable(bank); | ||
234 | if (bank->dbck_enable_mask) { | ||
235 | bank->context.debounce = debounce; | ||
236 | bank->context.debounce_en = val; | ||
237 | } | ||
207 | } | 238 | } |
208 | 239 | ||
209 | #ifdef CONFIG_ARCH_OMAP2PLUS | 240 | static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, |
210 | static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, | ||
211 | int trigger) | 241 | int trigger) |
212 | { | 242 | { |
213 | void __iomem *base = bank->base; | 243 | void __iomem *base = bank->base; |
214 | u32 gpio_bit = 1 << gpio; | 244 | u32 gpio_bit = 1 << gpio; |
215 | 245 | ||
216 | if (cpu_is_omap44xx()) { | 246 | _gpio_rmw(base, bank->regs->leveldetect0, gpio_bit, |
217 | _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, | 247 | trigger & IRQ_TYPE_LEVEL_LOW); |
218 | trigger & IRQ_TYPE_LEVEL_LOW); | 248 | _gpio_rmw(base, bank->regs->leveldetect1, gpio_bit, |
219 | _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, | 249 | trigger & IRQ_TYPE_LEVEL_HIGH); |
220 | trigger & IRQ_TYPE_LEVEL_HIGH); | 250 | _gpio_rmw(base, bank->regs->risingdetect, gpio_bit, |
221 | _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, | 251 | trigger & IRQ_TYPE_EDGE_RISING); |
222 | trigger & IRQ_TYPE_EDGE_RISING); | 252 | _gpio_rmw(base, bank->regs->fallingdetect, gpio_bit, |
223 | _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, | 253 | trigger & IRQ_TYPE_EDGE_FALLING); |
224 | trigger & IRQ_TYPE_EDGE_FALLING); | 254 | |
225 | } else { | 255 | bank->context.leveldetect0 = |
226 | _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, | 256 | __raw_readl(bank->base + bank->regs->leveldetect0); |
227 | trigger & IRQ_TYPE_LEVEL_LOW); | 257 | bank->context.leveldetect1 = |
228 | _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, | 258 | __raw_readl(bank->base + bank->regs->leveldetect1); |
229 | trigger & IRQ_TYPE_LEVEL_HIGH); | 259 | bank->context.risingdetect = |
230 | _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, | 260 | __raw_readl(bank->base + bank->regs->risingdetect); |
231 | trigger & IRQ_TYPE_EDGE_RISING); | 261 | bank->context.fallingdetect = |
232 | _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, | 262 | __raw_readl(bank->base + bank->regs->fallingdetect); |
233 | trigger & IRQ_TYPE_EDGE_FALLING); | 263 | |
234 | } | ||
235 | if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { | 264 | if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { |
236 | if (cpu_is_omap44xx()) { | 265 | _gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0); |
237 | _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, | 266 | bank->context.wake_en = |
238 | trigger != 0); | 267 | __raw_readl(bank->base + bank->regs->wkup_en); |
239 | } else { | ||
240 | /* | ||
241 | * GPIO wakeup request can only be generated on edge | ||
242 | * transitions | ||
243 | */ | ||
244 | if (trigger & IRQ_TYPE_EDGE_BOTH) | ||
245 | __raw_writel(1 << gpio, bank->base | ||
246 | + OMAP24XX_GPIO_SETWKUENA); | ||
247 | else | ||
248 | __raw_writel(1 << gpio, bank->base | ||
249 | + OMAP24XX_GPIO_CLEARWKUENA); | ||
250 | } | ||
251 | } | 268 | } |
269 | |||
252 | /* This part needs to be executed always for OMAP{34xx, 44xx} */ | 270 | /* This part needs to be executed always for OMAP{34xx, 44xx} */ |
253 | if (cpu_is_omap34xx() || cpu_is_omap44xx() || | 271 | if (!bank->regs->irqctrl) { |
254 | (bank->non_wakeup_gpios & gpio_bit)) { | 272 | /* On omap24xx proceed only when valid GPIO bit is set */ |
273 | if (bank->non_wakeup_gpios) { | ||
274 | if (!(bank->non_wakeup_gpios & gpio_bit)) | ||
275 | goto exit; | ||
276 | } | ||
277 | |||
255 | /* | 278 | /* |
256 | * Log the edge gpio and manually trigger the IRQ | 279 | * Log the edge gpio and manually trigger the IRQ |
257 | * after resume if the input level changes | 280 | * after resume if the input level changes |
@@ -264,17 +287,11 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, | |||
264 | bank->enabled_non_wakeup_gpios &= ~gpio_bit; | 287 | bank->enabled_non_wakeup_gpios &= ~gpio_bit; |
265 | } | 288 | } |
266 | 289 | ||
267 | if (cpu_is_omap44xx()) { | 290 | exit: |
268 | bank->level_mask = | 291 | bank->level_mask = |
269 | __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | | 292 | __raw_readl(bank->base + bank->regs->leveldetect0) | |
270 | __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); | 293 | __raw_readl(bank->base + bank->regs->leveldetect1); |
271 | } else { | ||
272 | bank->level_mask = | ||
273 | __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | | ||
274 | __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); | ||
275 | } | ||
276 | } | 294 | } |
277 | #endif | ||
278 | 295 | ||
279 | #ifdef CONFIG_ARCH_OMAP1 | 296 | #ifdef CONFIG_ARCH_OMAP1 |
280 | /* | 297 | /* |
@@ -286,23 +303,10 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) | |||
286 | void __iomem *reg = bank->base; | 303 | void __iomem *reg = bank->base; |
287 | u32 l = 0; | 304 | u32 l = 0; |
288 | 305 | ||
289 | switch (bank->method) { | 306 | if (!bank->regs->irqctrl) |
290 | case METHOD_MPUIO: | ||
291 | reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; | ||
292 | break; | ||
293 | #ifdef CONFIG_ARCH_OMAP15XX | ||
294 | case METHOD_GPIO_1510: | ||
295 | reg += OMAP1510_GPIO_INT_CONTROL; | ||
296 | break; | ||
297 | #endif | ||
298 | #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) | ||
299 | case METHOD_GPIO_7XX: | ||
300 | reg += OMAP7XX_GPIO_INT_CONTROL; | ||
301 | break; | ||
302 | #endif | ||
303 | default: | ||
304 | return; | 307 | return; |
305 | } | 308 | |
309 | reg += bank->regs->irqctrl; | ||
306 | 310 | ||
307 | l = __raw_readl(reg); | 311 | l = __raw_readl(reg); |
308 | if ((l >> gpio) & 1) | 312 | if ((l >> gpio) & 1) |
@@ -312,31 +316,21 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) | |||
312 | 316 | ||
313 | __raw_writel(l, reg); | 317 | __raw_writel(l, reg); |
314 | } | 318 | } |
319 | #else | ||
320 | static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {} | ||
315 | #endif | 321 | #endif |
316 | 322 | ||
317 | static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) | 323 | static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) |
318 | { | 324 | { |
319 | void __iomem *reg = bank->base; | 325 | void __iomem *reg = bank->base; |
326 | void __iomem *base = bank->base; | ||
320 | u32 l = 0; | 327 | u32 l = 0; |
321 | 328 | ||
322 | switch (bank->method) { | 329 | if (bank->regs->leveldetect0 && bank->regs->wkup_en) { |
323 | #ifdef CONFIG_ARCH_OMAP1 | 330 | set_gpio_trigger(bank, gpio, trigger); |
324 | case METHOD_MPUIO: | 331 | } else if (bank->regs->irqctrl) { |
325 | reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; | 332 | reg += bank->regs->irqctrl; |
326 | l = __raw_readl(reg); | 333 | |
327 | if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) | ||
328 | bank->toggle_mask |= 1 << gpio; | ||
329 | if (trigger & IRQ_TYPE_EDGE_RISING) | ||
330 | l |= 1 << gpio; | ||
331 | else if (trigger & IRQ_TYPE_EDGE_FALLING) | ||
332 | l &= ~(1 << gpio); | ||
333 | else | ||
334 | goto bad; | ||
335 | break; | ||
336 | #endif | ||
337 | #ifdef CONFIG_ARCH_OMAP15XX | ||
338 | case METHOD_GPIO_1510: | ||
339 | reg += OMAP1510_GPIO_INT_CONTROL; | ||
340 | l = __raw_readl(reg); | 334 | l = __raw_readl(reg); |
341 | if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) | 335 | if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) |
342 | bank->toggle_mask |= 1 << gpio; | 336 | bank->toggle_mask |= 1 << gpio; |
@@ -345,15 +339,15 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) | |||
345 | else if (trigger & IRQ_TYPE_EDGE_FALLING) | 339 | else if (trigger & IRQ_TYPE_EDGE_FALLING) |
346 | l &= ~(1 << gpio); | 340 | l &= ~(1 << gpio); |
347 | else | 341 | else |
348 | goto bad; | 342 | return -EINVAL; |
349 | break; | 343 | |
350 | #endif | 344 | __raw_writel(l, reg); |
351 | #ifdef CONFIG_ARCH_OMAP16XX | 345 | } else if (bank->regs->edgectrl1) { |
352 | case METHOD_GPIO_1610: | ||
353 | if (gpio & 0x08) | 346 | if (gpio & 0x08) |
354 | reg += OMAP1610_GPIO_EDGE_CTRL2; | 347 | reg += bank->regs->edgectrl2; |
355 | else | 348 | else |
356 | reg += OMAP1610_GPIO_EDGE_CTRL1; | 349 | reg += bank->regs->edgectrl1; |
350 | |||
357 | gpio &= 0x07; | 351 | gpio &= 0x07; |
358 | l = __raw_readl(reg); | 352 | l = __raw_readl(reg); |
359 | l &= ~(3 << (gpio << 1)); | 353 | l &= ~(3 << (gpio << 1)); |
@@ -361,40 +355,14 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) | |||
361 | l |= 2 << (gpio << 1); | 355 | l |= 2 << (gpio << 1); |
362 | if (trigger & IRQ_TYPE_EDGE_FALLING) | 356 | if (trigger & IRQ_TYPE_EDGE_FALLING) |
363 | l |= 1 << (gpio << 1); | 357 | l |= 1 << (gpio << 1); |
364 | if (trigger) | 358 | |
365 | /* Enable wake-up during idle for dynamic tick */ | 359 | /* Enable wake-up during idle for dynamic tick */ |
366 | __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); | 360 | _gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger); |
367 | else | 361 | bank->context.wake_en = |
368 | __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); | 362 | __raw_readl(bank->base + bank->regs->wkup_en); |
369 | break; | 363 | __raw_writel(l, reg); |
370 | #endif | ||
371 | #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) | ||
372 | case METHOD_GPIO_7XX: | ||
373 | reg += OMAP7XX_GPIO_INT_CONTROL; | ||
374 | l = __raw_readl(reg); | ||
375 | if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) | ||
376 | bank->toggle_mask |= 1 << gpio; | ||
377 | if (trigger & IRQ_TYPE_EDGE_RISING) | ||
378 | l |= 1 << gpio; | ||
379 | else if (trigger & IRQ_TYPE_EDGE_FALLING) | ||
380 | l &= ~(1 << gpio); | ||
381 | else | ||
382 | goto bad; | ||
383 | break; | ||
384 | #endif | ||
385 | #ifdef CONFIG_ARCH_OMAP2PLUS | ||
386 | case METHOD_GPIO_24XX: | ||
387 | case METHOD_GPIO_44XX: | ||
388 | set_24xx_gpio_triggering(bank, gpio, trigger); | ||
389 | return 0; | ||
390 | #endif | ||
391 | default: | ||
392 | goto bad; | ||
393 | } | 364 | } |
394 | __raw_writel(l, reg); | ||
395 | return 0; | 365 | return 0; |
396 | bad: | ||
397 | return -EINVAL; | ||
398 | } | 366 | } |
399 | 367 | ||
400 | static int gpio_irq_type(struct irq_data *d, unsigned type) | 368 | static int gpio_irq_type(struct irq_data *d, unsigned type) |
@@ -412,12 +380,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) | |||
412 | if (type & ~IRQ_TYPE_SENSE_MASK) | 380 | if (type & ~IRQ_TYPE_SENSE_MASK) |
413 | return -EINVAL; | 381 | return -EINVAL; |
414 | 382 | ||
415 | /* OMAP1 allows only only edge triggering */ | 383 | bank = irq_data_get_irq_chip_data(d); |
416 | if (!cpu_class_is_omap2() | 384 | |
417 | && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) | 385 | if (!bank->regs->leveldetect0 && |
386 | (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) | ||
418 | return -EINVAL; | 387 | return -EINVAL; |
419 | 388 | ||
420 | bank = irq_data_get_irq_chip_data(d); | ||
421 | spin_lock_irqsave(&bank->lock, flags); | 389 | spin_lock_irqsave(&bank->lock, flags); |
422 | retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); | 390 | retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); |
423 | spin_unlock_irqrestore(&bank->lock, flags); | 391 | spin_unlock_irqrestore(&bank->lock, flags); |
@@ -484,6 +452,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) | |||
484 | } | 452 | } |
485 | 453 | ||
486 | __raw_writel(l, reg); | 454 | __raw_writel(l, reg); |
455 | bank->context.irqenable1 = l; | ||
487 | } | 456 | } |
488 | 457 | ||
489 | static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) | 458 | static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) |
@@ -504,6 +473,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) | |||
504 | } | 473 | } |
505 | 474 | ||
506 | __raw_writel(l, reg); | 475 | __raw_writel(l, reg); |
476 | bank->context.irqenable1 = l; | ||
507 | } | 477 | } |
508 | 478 | ||
509 | static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) | 479 | static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) |
@@ -567,38 +537,39 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) | |||
567 | struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); | 537 | struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); |
568 | unsigned long flags; | 538 | unsigned long flags; |
569 | 539 | ||
570 | spin_lock_irqsave(&bank->lock, flags); | 540 | /* |
541 | * If this is the first gpio_request for the bank, | ||
542 | * enable the bank module. | ||
543 | */ | ||
544 | if (!bank->mod_usage) | ||
545 | pm_runtime_get_sync(bank->dev); | ||
571 | 546 | ||
547 | spin_lock_irqsave(&bank->lock, flags); | ||
572 | /* Set trigger to none. You need to enable the desired trigger with | 548 | /* Set trigger to none. You need to enable the desired trigger with |
573 | * request_irq() or set_irq_type(). | 549 | * request_irq() or set_irq_type(). |
574 | */ | 550 | */ |
575 | _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); | 551 | _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); |
576 | 552 | ||
577 | #ifdef CONFIG_ARCH_OMAP15XX | 553 | if (bank->regs->pinctrl) { |
578 | if (bank->method == METHOD_GPIO_1510) { | 554 | void __iomem *reg = bank->base + bank->regs->pinctrl; |
579 | void __iomem *reg; | ||
580 | 555 | ||
581 | /* Claim the pin for MPU */ | 556 | /* Claim the pin for MPU */ |
582 | reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; | ||
583 | __raw_writel(__raw_readl(reg) | (1 << offset), reg); | 557 | __raw_writel(__raw_readl(reg) | (1 << offset), reg); |
584 | } | 558 | } |
585 | #endif | 559 | |
586 | if (!cpu_class_is_omap1()) { | 560 | if (bank->regs->ctrl && !bank->mod_usage) { |
587 | if (!bank->mod_usage) { | 561 | void __iomem *reg = bank->base + bank->regs->ctrl; |
588 | void __iomem *reg = bank->base; | 562 | u32 ctrl; |
589 | u32 ctrl; | 563 | |
590 | 564 | ctrl = __raw_readl(reg); | |
591 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) | 565 | /* Module is enabled, clocks are not gated */ |
592 | reg += OMAP24XX_GPIO_CTRL; | 566 | ctrl &= ~GPIO_MOD_CTRL_BIT; |
593 | else if (cpu_is_omap44xx()) | 567 | __raw_writel(ctrl, reg); |
594 | reg += OMAP4_GPIO_CTRL; | 568 | bank->context.ctrl = ctrl; |
595 | ctrl = __raw_readl(reg); | ||
596 | /* Module is enabled, clocks are not gated */ | ||
597 | ctrl &= 0xFFFFFFFE; | ||
598 | __raw_writel(ctrl, reg); | ||
599 | } | ||
600 | bank->mod_usage |= 1 << offset; | ||
601 | } | 569 | } |
570 | |||
571 | bank->mod_usage |= 1 << offset; | ||
572 | |||
602 | spin_unlock_irqrestore(&bank->lock, flags); | 573 | spin_unlock_irqrestore(&bank->lock, flags); |
603 | 574 | ||
604 | return 0; | 575 | return 0; |
@@ -607,48 +578,40 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) | |||
607 | static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) | 578 | static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) |
608 | { | 579 | { |
609 | struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); | 580 | struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); |
581 | void __iomem *base = bank->base; | ||
610 | unsigned long flags; | 582 | unsigned long flags; |
611 | 583 | ||
612 | spin_lock_irqsave(&bank->lock, flags); | 584 | spin_lock_irqsave(&bank->lock, flags); |
613 | #ifdef CONFIG_ARCH_OMAP16XX | 585 | |
614 | if (bank->method == METHOD_GPIO_1610) { | 586 | if (bank->regs->wkup_en) { |
615 | /* Disable wake-up during idle for dynamic tick */ | ||
616 | void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; | ||
617 | __raw_writel(1 << offset, reg); | ||
618 | } | ||
619 | #endif | ||
620 | #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) | ||
621 | if (bank->method == METHOD_GPIO_24XX) { | ||
622 | /* Disable wake-up during idle for dynamic tick */ | ||
623 | void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; | ||
624 | __raw_writel(1 << offset, reg); | ||
625 | } | ||
626 | #endif | ||
627 | #ifdef CONFIG_ARCH_OMAP4 | ||
628 | if (bank->method == METHOD_GPIO_44XX) { | ||
629 | /* Disable wake-up during idle for dynamic tick */ | 587 | /* Disable wake-up during idle for dynamic tick */ |
630 | void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; | 588 | _gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0); |
631 | __raw_writel(1 << offset, reg); | 589 | bank->context.wake_en = |
590 | __raw_readl(bank->base + bank->regs->wkup_en); | ||
632 | } | 591 | } |
633 | #endif | 592 | |
634 | if (!cpu_class_is_omap1()) { | 593 | bank->mod_usage &= ~(1 << offset); |
635 | bank->mod_usage &= ~(1 << offset); | 594 | |
636 | if (!bank->mod_usage) { | 595 | if (bank->regs->ctrl && !bank->mod_usage) { |
637 | void __iomem *reg = bank->base; | 596 | void __iomem *reg = bank->base + bank->regs->ctrl; |
638 | u32 ctrl; | 597 | u32 ctrl; |
639 | 598 | ||
640 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) | 599 | ctrl = __raw_readl(reg); |
641 | reg += OMAP24XX_GPIO_CTRL; | 600 | /* Module is disabled, clocks are gated */ |
642 | else if (cpu_is_omap44xx()) | 601 | ctrl |= GPIO_MOD_CTRL_BIT; |
643 | reg += OMAP4_GPIO_CTRL; | 602 | __raw_writel(ctrl, reg); |
644 | ctrl = __raw_readl(reg); | 603 | bank->context.ctrl = ctrl; |
645 | /* Module is disabled, clocks are gated */ | ||
646 | ctrl |= 1; | ||
647 | __raw_writel(ctrl, reg); | ||
648 | } | ||
649 | } | 604 | } |
605 | |||
650 | _reset_gpio(bank, bank->chip.base + offset); | 606 | _reset_gpio(bank, bank->chip.base + offset); |
651 | spin_unlock_irqrestore(&bank->lock, flags); | 607 | spin_unlock_irqrestore(&bank->lock, flags); |
608 | |||
609 | /* | ||
610 | * If this is the last gpio to be freed in the bank, | ||
611 | * disable the bank module. | ||
612 | */ | ||
613 | if (!bank->mod_usage) | ||
614 | pm_runtime_put(bank->dev); | ||
652 | } | 615 | } |
653 | 616 | ||
654 | /* | 617 | /* |
@@ -674,6 +637,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) | |||
674 | 637 | ||
675 | bank = irq_get_handler_data(irq); | 638 | bank = irq_get_handler_data(irq); |
676 | isr_reg = bank->base + bank->regs->irqstatus; | 639 | isr_reg = bank->base + bank->regs->irqstatus; |
640 | pm_runtime_get_sync(bank->dev); | ||
677 | 641 | ||
678 | if (WARN_ON(!isr_reg)) | 642 | if (WARN_ON(!isr_reg)) |
679 | goto exit; | 643 | goto exit; |
@@ -685,12 +649,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) | |||
685 | enabled = _get_gpio_irqbank_mask(bank); | 649 | enabled = _get_gpio_irqbank_mask(bank); |
686 | isr_saved = isr = __raw_readl(isr_reg) & enabled; | 650 | isr_saved = isr = __raw_readl(isr_reg) & enabled; |
687 | 651 | ||
688 | if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) | 652 | if (bank->level_mask) |
689 | isr &= 0x0000ffff; | ||
690 | |||
691 | if (cpu_class_is_omap2()) { | ||
692 | level_mask = bank->level_mask & enabled; | 653 | level_mask = bank->level_mask & enabled; |
693 | } | ||
694 | 654 | ||
695 | /* clear edge sensitive interrupts before handler(s) are | 655 | /* clear edge sensitive interrupts before handler(s) are |
696 | called so that we don't miss any interrupt occurred while | 656 | called so that we don't miss any interrupt occurred while |
@@ -718,7 +678,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) | |||
718 | if (!(isr & 1)) | 678 | if (!(isr & 1)) |
719 | continue; | 679 | continue; |
720 | 680 | ||
721 | #ifdef CONFIG_ARCH_OMAP1 | ||
722 | /* | 681 | /* |
723 | * Some chips can't respond to both rising and falling | 682 | * Some chips can't respond to both rising and falling |
724 | * at the same time. If this irq was requested with | 683 | * at the same time. If this irq was requested with |
@@ -728,7 +687,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) | |||
728 | */ | 687 | */ |
729 | if (bank->toggle_mask & (1 << gpio_index)) | 688 | if (bank->toggle_mask & (1 << gpio_index)) |
730 | _toggle_gpio_edge_triggering(bank, gpio_index); | 689 | _toggle_gpio_edge_triggering(bank, gpio_index); |
731 | #endif | ||
732 | 690 | ||
733 | generic_handle_irq(gpio_irq); | 691 | generic_handle_irq(gpio_irq); |
734 | } | 692 | } |
@@ -740,6 +698,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) | |||
740 | exit: | 698 | exit: |
741 | if (!unmasked) | 699 | if (!unmasked) |
742 | chained_irq_exit(chip, desc); | 700 | chained_irq_exit(chip, desc); |
701 | pm_runtime_put(bank->dev); | ||
743 | } | 702 | } |
744 | 703 | ||
745 | static void gpio_irq_shutdown(struct irq_data *d) | 704 | static void gpio_irq_shutdown(struct irq_data *d) |
@@ -808,14 +767,6 @@ static struct irq_chip gpio_irq_chip = { | |||
808 | 767 | ||
809 | /*---------------------------------------------------------------------*/ | 768 | /*---------------------------------------------------------------------*/ |
810 | 769 | ||
811 | #ifdef CONFIG_ARCH_OMAP1 | ||
812 | |||
813 | #define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) | ||
814 | |||
815 | #ifdef CONFIG_ARCH_OMAP16XX | ||
816 | |||
817 | #include <linux/platform_device.h> | ||
818 | |||
819 | static int omap_mpuio_suspend_noirq(struct device *dev) | 770 | static int omap_mpuio_suspend_noirq(struct device *dev) |
820 | { | 771 | { |
821 | struct platform_device *pdev = to_platform_device(dev); | 772 | struct platform_device *pdev = to_platform_device(dev); |
@@ -869,32 +820,16 @@ static struct platform_device omap_mpuio_device = { | |||
869 | /* could list the /proc/iomem resources */ | 820 | /* could list the /proc/iomem resources */ |
870 | }; | 821 | }; |
871 | 822 | ||
872 | static inline void mpuio_init(void) | 823 | static inline void mpuio_init(struct gpio_bank *bank) |
873 | { | 824 | { |
874 | struct gpio_bank *bank = &gpio_bank[0]; | ||
875 | platform_set_drvdata(&omap_mpuio_device, bank); | 825 | platform_set_drvdata(&omap_mpuio_device, bank); |
876 | 826 | ||
877 | if (platform_driver_register(&omap_mpuio_driver) == 0) | 827 | if (platform_driver_register(&omap_mpuio_driver) == 0) |
878 | (void) platform_device_register(&omap_mpuio_device); | 828 | (void) platform_device_register(&omap_mpuio_device); |
879 | } | 829 | } |
880 | 830 | ||
881 | #else | ||
882 | static inline void mpuio_init(void) {} | ||
883 | #endif /* 16xx */ | ||
884 | |||
885 | #else | ||
886 | |||
887 | #define bank_is_mpuio(bank) 0 | ||
888 | static inline void mpuio_init(void) {} | ||
889 | |||
890 | #endif | ||
891 | |||
892 | /*---------------------------------------------------------------------*/ | 831 | /*---------------------------------------------------------------------*/ |
893 | 832 | ||
894 | /* REVISIT these are stupid implementations! replace by ones that | ||
895 | * don't switch on METHOD_* and which mostly avoid spinlocks | ||
896 | */ | ||
897 | |||
898 | static int gpio_input(struct gpio_chip *chip, unsigned offset) | 833 | static int gpio_input(struct gpio_chip *chip, unsigned offset) |
899 | { | 834 | { |
900 | struct gpio_bank *bank; | 835 | struct gpio_bank *bank; |
@@ -1007,78 +942,32 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) | |||
1007 | */ | 942 | */ |
1008 | static struct lock_class_key gpio_lock_class; | 943 | static struct lock_class_key gpio_lock_class; |
1009 | 944 | ||
1010 | static inline int init_gpio_info(struct platform_device *pdev) | 945 | static void omap_gpio_mod_init(struct gpio_bank *bank) |
1011 | { | 946 | { |
1012 | /* TODO: Analyze removing gpio_bank_count usage from driver code */ | 947 | void __iomem *base = bank->base; |
1013 | gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), | 948 | u32 l = 0xffffffff; |
1014 | GFP_KERNEL); | ||
1015 | if (!gpio_bank) { | ||
1016 | dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); | ||
1017 | return -ENOMEM; | ||
1018 | } | ||
1019 | return 0; | ||
1020 | } | ||
1021 | 949 | ||
1022 | /* TODO: Cleanup cpu_is_* checks */ | 950 | if (bank->width == 16) |
1023 | static void omap_gpio_mod_init(struct gpio_bank *bank, int id) | 951 | l = 0xffff; |
1024 | { | ||
1025 | if (cpu_class_is_omap2()) { | ||
1026 | if (cpu_is_omap44xx()) { | ||
1027 | __raw_writel(0xffffffff, bank->base + | ||
1028 | OMAP4_GPIO_IRQSTATUSCLR0); | ||
1029 | __raw_writel(0x00000000, bank->base + | ||
1030 | OMAP4_GPIO_DEBOUNCENABLE); | ||
1031 | /* Initialize interface clk ungated, module enabled */ | ||
1032 | __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); | ||
1033 | } else if (cpu_is_omap34xx()) { | ||
1034 | __raw_writel(0x00000000, bank->base + | ||
1035 | OMAP24XX_GPIO_IRQENABLE1); | ||
1036 | __raw_writel(0xffffffff, bank->base + | ||
1037 | OMAP24XX_GPIO_IRQSTATUS1); | ||
1038 | __raw_writel(0x00000000, bank->base + | ||
1039 | OMAP24XX_GPIO_DEBOUNCE_EN); | ||
1040 | |||
1041 | /* Initialize interface clk ungated, module enabled */ | ||
1042 | __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); | ||
1043 | } else if (cpu_is_omap24xx()) { | ||
1044 | static const u32 non_wakeup_gpios[] = { | ||
1045 | 0xe203ffc0, 0x08700040 | ||
1046 | }; | ||
1047 | if (id < ARRAY_SIZE(non_wakeup_gpios)) | ||
1048 | bank->non_wakeup_gpios = non_wakeup_gpios[id]; | ||
1049 | } | ||
1050 | } else if (cpu_class_is_omap1()) { | ||
1051 | if (bank_is_mpuio(bank)) | ||
1052 | __raw_writew(0xffff, bank->base + | ||
1053 | OMAP_MPUIO_GPIO_MASKIT / bank->stride); | ||
1054 | if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { | ||
1055 | __raw_writew(0xffff, bank->base | ||
1056 | + OMAP1510_GPIO_INT_MASK); | ||
1057 | __raw_writew(0x0000, bank->base | ||
1058 | + OMAP1510_GPIO_INT_STATUS); | ||
1059 | } | ||
1060 | if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { | ||
1061 | __raw_writew(0x0000, bank->base | ||
1062 | + OMAP1610_GPIO_IRQENABLE1); | ||
1063 | __raw_writew(0xffff, bank->base | ||
1064 | + OMAP1610_GPIO_IRQSTATUS1); | ||
1065 | __raw_writew(0x0014, bank->base | ||
1066 | + OMAP1610_GPIO_SYSCONFIG); | ||
1067 | 952 | ||
1068 | /* | 953 | if (bank->is_mpuio) { |
1069 | * Enable system clock for GPIO module. | 954 | __raw_writel(l, bank->base + bank->regs->irqenable); |
1070 | * The CAM_CLK_CTRL *is* really the right place. | 955 | return; |
1071 | */ | ||
1072 | omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, | ||
1073 | ULPD_CAM_CLK_CTRL); | ||
1074 | } | ||
1075 | if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { | ||
1076 | __raw_writel(0xffffffff, bank->base | ||
1077 | + OMAP7XX_GPIO_INT_MASK); | ||
1078 | __raw_writel(0x00000000, bank->base | ||
1079 | + OMAP7XX_GPIO_INT_STATUS); | ||
1080 | } | ||
1081 | } | 956 | } |
957 | |||
958 | _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv); | ||
959 | _gpio_rmw(base, bank->regs->irqstatus, l, | ||
960 | bank->regs->irqenable_inv == false); | ||
961 | _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0); | ||
962 | _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0); | ||
963 | if (bank->regs->debounce_en) | ||
964 | _gpio_rmw(base, bank->regs->debounce_en, 0, 1); | ||
965 | |||
966 | /* Save OE default value (0xffffffff) in the context */ | ||
967 | bank->context.oe = __raw_readl(bank->base + bank->regs->direction); | ||
968 | /* Initialize interface clk ungated, module enabled */ | ||
969 | if (bank->regs->ctrl) | ||
970 | _gpio_rmw(base, bank->regs->ctrl, 0, 1); | ||
1082 | } | 971 | } |
1083 | 972 | ||
1084 | static __init void | 973 | static __init void |
@@ -1101,8 +990,8 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, | |||
1101 | ct->chip.irq_mask = irq_gc_mask_set_bit; | 990 | ct->chip.irq_mask = irq_gc_mask_set_bit; |
1102 | ct->chip.irq_unmask = irq_gc_mask_clr_bit; | 991 | ct->chip.irq_unmask = irq_gc_mask_clr_bit; |
1103 | ct->chip.irq_set_type = gpio_irq_type; | 992 | ct->chip.irq_set_type = gpio_irq_type; |
1104 | /* REVISIT: assuming only 16xx supports MPUIO wake events */ | 993 | |
1105 | if (cpu_is_omap16xx()) | 994 | if (bank->regs->wkup_en) |
1106 | ct->chip.irq_set_wake = gpio_wake_enable, | 995 | ct->chip.irq_set_wake = gpio_wake_enable, |
1107 | 996 | ||
1108 | ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; | 997 | ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; |
@@ -1115,7 +1004,6 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) | |||
1115 | int j; | 1004 | int j; |
1116 | static int gpio; | 1005 | static int gpio; |
1117 | 1006 | ||
1118 | bank->mod_usage = 0; | ||
1119 | /* | 1007 | /* |
1120 | * REVISIT eventually switch from OMAP-specific gpio structs | 1008 | * REVISIT eventually switch from OMAP-specific gpio structs |
1121 | * over to the generic ones | 1009 | * over to the generic ones |
@@ -1128,11 +1016,10 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) | |||
1128 | bank->chip.set_debounce = gpio_debounce; | 1016 | bank->chip.set_debounce = gpio_debounce; |
1129 | bank->chip.set = gpio_set; | 1017 | bank->chip.set = gpio_set; |
1130 | bank->chip.to_irq = gpio_2irq; | 1018 | bank->chip.to_irq = gpio_2irq; |
1131 | if (bank_is_mpuio(bank)) { | 1019 | if (bank->is_mpuio) { |
1132 | bank->chip.label = "mpuio"; | 1020 | bank->chip.label = "mpuio"; |
1133 | #ifdef CONFIG_ARCH_OMAP16XX | 1021 | if (bank->regs->wkup_en) |
1134 | bank->chip.dev = &omap_mpuio_device.dev; | 1022 | bank->chip.dev = &omap_mpuio_device.dev; |
1135 | #endif | ||
1136 | bank->chip.base = OMAP_MPUIO(0); | 1023 | bank->chip.base = OMAP_MPUIO(0); |
1137 | } else { | 1024 | } else { |
1138 | bank->chip.label = "gpio"; | 1025 | bank->chip.label = "gpio"; |
@@ -1147,7 +1034,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) | |||
1147 | j < bank->virtual_irq_start + bank->width; j++) { | 1034 | j < bank->virtual_irq_start + bank->width; j++) { |
1148 | irq_set_lockdep_class(j, &gpio_lock_class); | 1035 | irq_set_lockdep_class(j, &gpio_lock_class); |
1149 | irq_set_chip_data(j, bank); | 1036 | irq_set_chip_data(j, bank); |
1150 | if (bank_is_mpuio(bank)) { | 1037 | if (bank->is_mpuio) { |
1151 | omap_mpuio_alloc_gc(bank, j, bank->width); | 1038 | omap_mpuio_alloc_gc(bank, j, bank->width); |
1152 | } else { | 1039 | } else { |
1153 | irq_set_chip(j, &gpio_irq_chip); | 1040 | irq_set_chip(j, &gpio_irq_chip); |
@@ -1161,42 +1048,44 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) | |||
1161 | 1048 | ||
1162 | static int __devinit omap_gpio_probe(struct platform_device *pdev) | 1049 | static int __devinit omap_gpio_probe(struct platform_device *pdev) |
1163 | { | 1050 | { |
1164 | static int gpio_init_done; | ||
1165 | struct omap_gpio_platform_data *pdata; | 1051 | struct omap_gpio_platform_data *pdata; |
1166 | struct resource *res; | 1052 | struct resource *res; |
1167 | int id; | ||
1168 | struct gpio_bank *bank; | 1053 | struct gpio_bank *bank; |
1054 | int ret = 0; | ||
1169 | 1055 | ||
1170 | if (!pdev->dev.platform_data) | 1056 | if (!pdev->dev.platform_data) { |
1171 | return -EINVAL; | 1057 | ret = -EINVAL; |
1172 | 1058 | goto err_exit; | |
1173 | pdata = pdev->dev.platform_data; | ||
1174 | |||
1175 | if (!gpio_init_done) { | ||
1176 | int ret; | ||
1177 | |||
1178 | ret = init_gpio_info(pdev); | ||
1179 | if (ret) | ||
1180 | return ret; | ||
1181 | } | 1059 | } |
1182 | 1060 | ||
1183 | id = pdev->id; | 1061 | bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL); |
1184 | bank = &gpio_bank[id]; | 1062 | if (!bank) { |
1063 | dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); | ||
1064 | ret = -ENOMEM; | ||
1065 | goto err_exit; | ||
1066 | } | ||
1185 | 1067 | ||
1186 | res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 1068 | res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
1187 | if (unlikely(!res)) { | 1069 | if (unlikely(!res)) { |
1188 | dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); | 1070 | dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", |
1189 | return -ENODEV; | 1071 | pdev->id); |
1072 | ret = -ENODEV; | ||
1073 | goto err_free; | ||
1190 | } | 1074 | } |
1191 | 1075 | ||
1192 | bank->irq = res->start; | 1076 | bank->irq = res->start; |
1077 | bank->id = pdev->id; | ||
1078 | |||
1079 | pdata = pdev->dev.platform_data; | ||
1193 | bank->virtual_irq_start = pdata->virtual_irq_start; | 1080 | bank->virtual_irq_start = pdata->virtual_irq_start; |
1194 | bank->method = pdata->bank_type; | ||
1195 | bank->dev = &pdev->dev; | 1081 | bank->dev = &pdev->dev; |
1196 | bank->dbck_flag = pdata->dbck_flag; | 1082 | bank->dbck_flag = pdata->dbck_flag; |
1197 | bank->stride = pdata->bank_stride; | 1083 | bank->stride = pdata->bank_stride; |
1198 | bank->width = pdata->bank_width; | 1084 | bank->width = pdata->bank_width; |
1199 | 1085 | bank->is_mpuio = pdata->is_mpuio; | |
1086 | bank->non_wakeup_gpios = pdata->non_wakeup_gpios; | ||
1087 | bank->loses_context = pdata->loses_context; | ||
1088 | bank->get_context_loss_count = pdata->get_context_loss_count; | ||
1200 | bank->regs = pdata->regs; | 1089 | bank->regs = pdata->regs; |
1201 | 1090 | ||
1202 | if (bank->regs->set_dataout && bank->regs->clr_dataout) | 1091 | if (bank->regs->set_dataout && bank->regs->clr_dataout) |
@@ -1209,369 +1098,310 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) | |||
1209 | /* Static mapping, never released */ | 1098 | /* Static mapping, never released */ |
1210 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 1099 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
1211 | if (unlikely(!res)) { | 1100 | if (unlikely(!res)) { |
1212 | dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); | 1101 | dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", |
1213 | return -ENODEV; | 1102 | pdev->id); |
1103 | ret = -ENODEV; | ||
1104 | goto err_free; | ||
1214 | } | 1105 | } |
1215 | 1106 | ||
1216 | bank->base = ioremap(res->start, resource_size(res)); | 1107 | bank->base = ioremap(res->start, resource_size(res)); |
1217 | if (!bank->base) { | 1108 | if (!bank->base) { |
1218 | dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); | 1109 | dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", |
1219 | return -ENOMEM; | 1110 | pdev->id); |
1111 | ret = -ENOMEM; | ||
1112 | goto err_free; | ||
1220 | } | 1113 | } |
1221 | 1114 | ||
1115 | platform_set_drvdata(pdev, bank); | ||
1116 | |||
1222 | pm_runtime_enable(bank->dev); | 1117 | pm_runtime_enable(bank->dev); |
1118 | pm_runtime_irq_safe(bank->dev); | ||
1223 | pm_runtime_get_sync(bank->dev); | 1119 | pm_runtime_get_sync(bank->dev); |
1224 | 1120 | ||
1225 | omap_gpio_mod_init(bank, id); | 1121 | if (bank->is_mpuio) |
1122 | mpuio_init(bank); | ||
1123 | |||
1124 | omap_gpio_mod_init(bank); | ||
1226 | omap_gpio_chip_init(bank); | 1125 | omap_gpio_chip_init(bank); |
1227 | omap_gpio_show_rev(bank); | 1126 | omap_gpio_show_rev(bank); |
1228 | 1127 | ||
1229 | if (!gpio_init_done) | 1128 | pm_runtime_put(bank->dev); |
1230 | gpio_init_done = 1; | ||
1231 | 1129 | ||
1232 | return 0; | 1130 | list_add_tail(&bank->node, &omap_gpio_list); |
1131 | |||
1132 | return ret; | ||
1133 | |||
1134 | err_free: | ||
1135 | kfree(bank); | ||
1136 | err_exit: | ||
1137 | return ret; | ||
1233 | } | 1138 | } |
1234 | 1139 | ||
1235 | #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) | 1140 | #ifdef CONFIG_ARCH_OMAP2PLUS |
1236 | static int omap_gpio_suspend(void) | 1141 | |
1142 | #if defined(CONFIG_PM_SLEEP) | ||
1143 | static int omap_gpio_suspend(struct device *dev) | ||
1237 | { | 1144 | { |
1238 | int i; | 1145 | struct platform_device *pdev = to_platform_device(dev); |
1146 | struct gpio_bank *bank = platform_get_drvdata(pdev); | ||
1147 | void __iomem *base = bank->base; | ||
1148 | void __iomem *wakeup_enable; | ||
1149 | unsigned long flags; | ||
1239 | 1150 | ||
1240 | if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) | 1151 | if (!bank->mod_usage || !bank->loses_context) |
1241 | return 0; | 1152 | return 0; |
1242 | 1153 | ||
1243 | for (i = 0; i < gpio_bank_count; i++) { | 1154 | if (!bank->regs->wkup_en || !bank->suspend_wakeup) |
1244 | struct gpio_bank *bank = &gpio_bank[i]; | 1155 | return 0; |
1245 | void __iomem *wake_status; | ||
1246 | void __iomem *wake_clear; | ||
1247 | void __iomem *wake_set; | ||
1248 | unsigned long flags; | ||
1249 | |||
1250 | switch (bank->method) { | ||
1251 | #ifdef CONFIG_ARCH_OMAP16XX | ||
1252 | case METHOD_GPIO_1610: | ||
1253 | wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; | ||
1254 | wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; | ||
1255 | wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; | ||
1256 | break; | ||
1257 | #endif | ||
1258 | #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) | ||
1259 | case METHOD_GPIO_24XX: | ||
1260 | wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; | ||
1261 | wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; | ||
1262 | wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; | ||
1263 | break; | ||
1264 | #endif | ||
1265 | #ifdef CONFIG_ARCH_OMAP4 | ||
1266 | case METHOD_GPIO_44XX: | ||
1267 | wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; | ||
1268 | wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; | ||
1269 | wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; | ||
1270 | break; | ||
1271 | #endif | ||
1272 | default: | ||
1273 | continue; | ||
1274 | } | ||
1275 | 1156 | ||
1276 | spin_lock_irqsave(&bank->lock, flags); | 1157 | wakeup_enable = bank->base + bank->regs->wkup_en; |
1277 | bank->saved_wakeup = __raw_readl(wake_status); | 1158 | |
1278 | __raw_writel(0xffffffff, wake_clear); | 1159 | spin_lock_irqsave(&bank->lock, flags); |
1279 | __raw_writel(bank->suspend_wakeup, wake_set); | 1160 | bank->saved_wakeup = __raw_readl(wakeup_enable); |
1280 | spin_unlock_irqrestore(&bank->lock, flags); | 1161 | _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); |
1281 | } | 1162 | _gpio_rmw(base, bank->regs->wkup_en, bank->suspend_wakeup, 1); |
1163 | spin_unlock_irqrestore(&bank->lock, flags); | ||
1282 | 1164 | ||
1283 | return 0; | 1165 | return 0; |
1284 | } | 1166 | } |
1285 | 1167 | ||
1286 | static void omap_gpio_resume(void) | 1168 | static int omap_gpio_resume(struct device *dev) |
1287 | { | 1169 | { |
1288 | int i; | 1170 | struct platform_device *pdev = to_platform_device(dev); |
1171 | struct gpio_bank *bank = platform_get_drvdata(pdev); | ||
1172 | void __iomem *base = bank->base; | ||
1173 | unsigned long flags; | ||
1289 | 1174 | ||
1290 | if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) | 1175 | if (!bank->mod_usage || !bank->loses_context) |
1291 | return; | 1176 | return 0; |
1292 | 1177 | ||
1293 | for (i = 0; i < gpio_bank_count; i++) { | 1178 | if (!bank->regs->wkup_en || !bank->saved_wakeup) |
1294 | struct gpio_bank *bank = &gpio_bank[i]; | 1179 | return 0; |
1295 | void __iomem *wake_clear; | ||
1296 | void __iomem *wake_set; | ||
1297 | unsigned long flags; | ||
1298 | |||
1299 | switch (bank->method) { | ||
1300 | #ifdef CONFIG_ARCH_OMAP16XX | ||
1301 | case METHOD_GPIO_1610: | ||
1302 | wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; | ||
1303 | wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; | ||
1304 | break; | ||
1305 | #endif | ||
1306 | #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) | ||
1307 | case METHOD_GPIO_24XX: | ||
1308 | wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; | ||
1309 | wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; | ||
1310 | break; | ||
1311 | #endif | ||
1312 | #ifdef CONFIG_ARCH_OMAP4 | ||
1313 | case METHOD_GPIO_44XX: | ||
1314 | wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; | ||
1315 | wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; | ||
1316 | break; | ||
1317 | #endif | ||
1318 | default: | ||
1319 | continue; | ||
1320 | } | ||
1321 | 1180 | ||
1322 | spin_lock_irqsave(&bank->lock, flags); | 1181 | spin_lock_irqsave(&bank->lock, flags); |
1323 | __raw_writel(0xffffffff, wake_clear); | 1182 | _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); |
1324 | __raw_writel(bank->saved_wakeup, wake_set); | 1183 | _gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1); |
1325 | spin_unlock_irqrestore(&bank->lock, flags); | 1184 | spin_unlock_irqrestore(&bank->lock, flags); |
1326 | } | ||
1327 | } | ||
1328 | 1185 | ||
1329 | static struct syscore_ops omap_gpio_syscore_ops = { | 1186 | return 0; |
1330 | .suspend = omap_gpio_suspend, | 1187 | } |
1331 | .resume = omap_gpio_resume, | 1188 | #endif /* CONFIG_PM_SLEEP */ |
1332 | }; | ||
1333 | 1189 | ||
1334 | #endif | 1190 | #if defined(CONFIG_PM_RUNTIME) |
1191 | static void omap_gpio_restore_context(struct gpio_bank *bank); | ||
1335 | 1192 | ||
1336 | #ifdef CONFIG_ARCH_OMAP2PLUS | 1193 | static int omap_gpio_runtime_suspend(struct device *dev) |
1194 | { | ||
1195 | struct platform_device *pdev = to_platform_device(dev); | ||
1196 | struct gpio_bank *bank = platform_get_drvdata(pdev); | ||
1197 | u32 l1 = 0, l2 = 0; | ||
1198 | unsigned long flags; | ||
1337 | 1199 | ||
1338 | static int workaround_enabled; | 1200 | spin_lock_irqsave(&bank->lock, flags); |
1201 | if (bank->power_mode != OFF_MODE) { | ||
1202 | bank->power_mode = 0; | ||
1203 | goto update_gpio_context_count; | ||
1204 | } | ||
1205 | /* | ||
1206 | * If going to OFF, remove triggering for all | ||
1207 | * non-wakeup GPIOs. Otherwise spurious IRQs will be | ||
1208 | * generated. See OMAP2420 Errata item 1.101. | ||
1209 | */ | ||
1210 | if (!(bank->enabled_non_wakeup_gpios)) | ||
1211 | goto update_gpio_context_count; | ||
1339 | 1212 | ||
1340 | void omap2_gpio_prepare_for_idle(int off_mode) | 1213 | bank->saved_datain = __raw_readl(bank->base + |
1341 | { | 1214 | bank->regs->datain); |
1342 | int i, c = 0; | 1215 | l1 = __raw_readl(bank->base + bank->regs->fallingdetect); |
1343 | int min = 0; | 1216 | l2 = __raw_readl(bank->base + bank->regs->risingdetect); |
1344 | 1217 | ||
1345 | if (cpu_is_omap34xx()) | 1218 | bank->saved_fallingdetect = l1; |
1346 | min = 1; | 1219 | bank->saved_risingdetect = l2; |
1220 | l1 &= ~bank->enabled_non_wakeup_gpios; | ||
1221 | l2 &= ~bank->enabled_non_wakeup_gpios; | ||
1347 | 1222 | ||
1348 | for (i = min; i < gpio_bank_count; i++) { | 1223 | __raw_writel(l1, bank->base + bank->regs->fallingdetect); |
1349 | struct gpio_bank *bank = &gpio_bank[i]; | 1224 | __raw_writel(l2, bank->base + bank->regs->risingdetect); |
1350 | u32 l1 = 0, l2 = 0; | ||
1351 | int j; | ||
1352 | 1225 | ||
1353 | for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) | 1226 | bank->workaround_enabled = true; |
1354 | clk_disable(bank->dbck); | ||
1355 | 1227 | ||
1356 | if (!off_mode) | 1228 | update_gpio_context_count: |
1357 | continue; | 1229 | if (bank->get_context_loss_count) |
1230 | bank->context_loss_count = | ||
1231 | bank->get_context_loss_count(bank->dev); | ||
1358 | 1232 | ||
1359 | /* If going to OFF, remove triggering for all | 1233 | _gpio_dbck_disable(bank); |
1360 | * non-wakeup GPIOs. Otherwise spurious IRQs will be | 1234 | spin_unlock_irqrestore(&bank->lock, flags); |
1361 | * generated. See OMAP2420 Errata item 1.101. */ | ||
1362 | if (!(bank->enabled_non_wakeup_gpios)) | ||
1363 | continue; | ||
1364 | 1235 | ||
1365 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | 1236 | return 0; |
1366 | bank->saved_datain = __raw_readl(bank->base + | 1237 | } |
1367 | OMAP24XX_GPIO_DATAIN); | ||
1368 | l1 = __raw_readl(bank->base + | ||
1369 | OMAP24XX_GPIO_FALLINGDETECT); | ||
1370 | l2 = __raw_readl(bank->base + | ||
1371 | OMAP24XX_GPIO_RISINGDETECT); | ||
1372 | } | ||
1373 | 1238 | ||
1374 | if (cpu_is_omap44xx()) { | 1239 | static int omap_gpio_runtime_resume(struct device *dev) |
1375 | bank->saved_datain = __raw_readl(bank->base + | 1240 | { |
1376 | OMAP4_GPIO_DATAIN); | 1241 | struct platform_device *pdev = to_platform_device(dev); |
1377 | l1 = __raw_readl(bank->base + | 1242 | struct gpio_bank *bank = platform_get_drvdata(pdev); |
1378 | OMAP4_GPIO_FALLINGDETECT); | 1243 | int context_lost_cnt_after; |
1379 | l2 = __raw_readl(bank->base + | 1244 | u32 l = 0, gen, gen0, gen1; |
1380 | OMAP4_GPIO_RISINGDETECT); | 1245 | unsigned long flags; |
1381 | } | ||
1382 | 1246 | ||
1383 | bank->saved_fallingdetect = l1; | 1247 | spin_lock_irqsave(&bank->lock, flags); |
1384 | bank->saved_risingdetect = l2; | 1248 | _gpio_dbck_enable(bank); |
1385 | l1 &= ~bank->enabled_non_wakeup_gpios; | 1249 | if (!bank->enabled_non_wakeup_gpios || !bank->workaround_enabled) { |
1386 | l2 &= ~bank->enabled_non_wakeup_gpios; | 1250 | spin_unlock_irqrestore(&bank->lock, flags); |
1251 | return 0; | ||
1252 | } | ||
1387 | 1253 | ||
1388 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | 1254 | if (bank->get_context_loss_count) { |
1389 | __raw_writel(l1, bank->base + | 1255 | context_lost_cnt_after = |
1390 | OMAP24XX_GPIO_FALLINGDETECT); | 1256 | bank->get_context_loss_count(bank->dev); |
1391 | __raw_writel(l2, bank->base + | 1257 | if (context_lost_cnt_after != bank->context_loss_count || |
1392 | OMAP24XX_GPIO_RISINGDETECT); | 1258 | !context_lost_cnt_after) { |
1259 | omap_gpio_restore_context(bank); | ||
1260 | } else { | ||
1261 | spin_unlock_irqrestore(&bank->lock, flags); | ||
1262 | return 0; | ||
1393 | } | 1263 | } |
1264 | } | ||
1394 | 1265 | ||
1395 | if (cpu_is_omap44xx()) { | 1266 | __raw_writel(bank->saved_fallingdetect, |
1396 | __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); | 1267 | bank->base + bank->regs->fallingdetect); |
1397 | __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); | 1268 | __raw_writel(bank->saved_risingdetect, |
1398 | } | 1269 | bank->base + bank->regs->risingdetect); |
1270 | l = __raw_readl(bank->base + bank->regs->datain); | ||
1399 | 1271 | ||
1400 | c++; | 1272 | /* |
1401 | } | 1273 | * Check if any of the non-wakeup interrupt GPIOs have changed |
1402 | if (!c) { | 1274 | * state. If so, generate an IRQ by software. This is |
1403 | workaround_enabled = 0; | 1275 | * horribly racy, but it's the best we can do to work around |
1404 | return; | 1276 | * this silicon bug. |
1405 | } | 1277 | */ |
1406 | workaround_enabled = 1; | 1278 | l ^= bank->saved_datain; |
1407 | } | 1279 | l &= bank->enabled_non_wakeup_gpios; |
1408 | 1280 | ||
1409 | void omap2_gpio_resume_after_idle(void) | 1281 | /* |
1410 | { | 1282 | * No need to generate IRQs for the rising edge for gpio IRQs |
1411 | int i; | 1283 | * configured with falling edge only; and vice versa. |
1412 | int min = 0; | 1284 | */ |
1285 | gen0 = l & bank->saved_fallingdetect; | ||
1286 | gen0 &= bank->saved_datain; | ||
1413 | 1287 | ||
1414 | if (cpu_is_omap34xx()) | 1288 | gen1 = l & bank->saved_risingdetect; |
1415 | min = 1; | 1289 | gen1 &= ~(bank->saved_datain); |
1416 | for (i = min; i < gpio_bank_count; i++) { | ||
1417 | struct gpio_bank *bank = &gpio_bank[i]; | ||
1418 | u32 l = 0, gen, gen0, gen1; | ||
1419 | int j; | ||
1420 | 1290 | ||
1421 | for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) | 1291 | /* FIXME: Consider GPIO IRQs with level detections properly! */ |
1422 | clk_enable(bank->dbck); | 1292 | gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect)); |
1293 | /* Consider all GPIO IRQs needed to be updated */ | ||
1294 | gen |= gen0 | gen1; | ||
1423 | 1295 | ||
1424 | if (!workaround_enabled) | 1296 | if (gen) { |
1425 | continue; | 1297 | u32 old0, old1; |
1426 | 1298 | ||
1427 | if (!(bank->enabled_non_wakeup_gpios)) | 1299 | old0 = __raw_readl(bank->base + bank->regs->leveldetect0); |
1428 | continue; | 1300 | old1 = __raw_readl(bank->base + bank->regs->leveldetect1); |
1429 | 1301 | ||
1430 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | 1302 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { |
1431 | __raw_writel(bank->saved_fallingdetect, | 1303 | __raw_writel(old0 | gen, bank->base + |
1432 | bank->base + OMAP24XX_GPIO_FALLINGDETECT); | 1304 | bank->regs->leveldetect0); |
1433 | __raw_writel(bank->saved_risingdetect, | 1305 | __raw_writel(old1 | gen, bank->base + |
1434 | bank->base + OMAP24XX_GPIO_RISINGDETECT); | 1306 | bank->regs->leveldetect1); |
1435 | l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); | ||
1436 | } | 1307 | } |
1437 | 1308 | ||
1438 | if (cpu_is_omap44xx()) { | 1309 | if (cpu_is_omap44xx()) { |
1439 | __raw_writel(bank->saved_fallingdetect, | 1310 | __raw_writel(old0 | l, bank->base + |
1440 | bank->base + OMAP4_GPIO_FALLINGDETECT); | 1311 | bank->regs->leveldetect0); |
1441 | __raw_writel(bank->saved_risingdetect, | 1312 | __raw_writel(old1 | l, bank->base + |
1442 | bank->base + OMAP4_GPIO_RISINGDETECT); | 1313 | bank->regs->leveldetect1); |
1443 | l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); | ||
1444 | } | ||
1445 | |||
1446 | /* Check if any of the non-wakeup interrupt GPIOs have changed | ||
1447 | * state. If so, generate an IRQ by software. This is | ||
1448 | * horribly racy, but it's the best we can do to work around | ||
1449 | * this silicon bug. */ | ||
1450 | l ^= bank->saved_datain; | ||
1451 | l &= bank->enabled_non_wakeup_gpios; | ||
1452 | |||
1453 | /* | ||
1454 | * No need to generate IRQs for the rising edge for gpio IRQs | ||
1455 | * configured with falling edge only; and vice versa. | ||
1456 | */ | ||
1457 | gen0 = l & bank->saved_fallingdetect; | ||
1458 | gen0 &= bank->saved_datain; | ||
1459 | |||
1460 | gen1 = l & bank->saved_risingdetect; | ||
1461 | gen1 &= ~(bank->saved_datain); | ||
1462 | |||
1463 | /* FIXME: Consider GPIO IRQs with level detections properly! */ | ||
1464 | gen = l & (~(bank->saved_fallingdetect) & | ||
1465 | ~(bank->saved_risingdetect)); | ||
1466 | /* Consider all GPIO IRQs needed to be updated */ | ||
1467 | gen |= gen0 | gen1; | ||
1468 | |||
1469 | if (gen) { | ||
1470 | u32 old0, old1; | ||
1471 | |||
1472 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | ||
1473 | old0 = __raw_readl(bank->base + | ||
1474 | OMAP24XX_GPIO_LEVELDETECT0); | ||
1475 | old1 = __raw_readl(bank->base + | ||
1476 | OMAP24XX_GPIO_LEVELDETECT1); | ||
1477 | __raw_writel(old0 | gen, bank->base + | ||
1478 | OMAP24XX_GPIO_LEVELDETECT0); | ||
1479 | __raw_writel(old1 | gen, bank->base + | ||
1480 | OMAP24XX_GPIO_LEVELDETECT1); | ||
1481 | __raw_writel(old0, bank->base + | ||
1482 | OMAP24XX_GPIO_LEVELDETECT0); | ||
1483 | __raw_writel(old1, bank->base + | ||
1484 | OMAP24XX_GPIO_LEVELDETECT1); | ||
1485 | } | ||
1486 | |||
1487 | if (cpu_is_omap44xx()) { | ||
1488 | old0 = __raw_readl(bank->base + | ||
1489 | OMAP4_GPIO_LEVELDETECT0); | ||
1490 | old1 = __raw_readl(bank->base + | ||
1491 | OMAP4_GPIO_LEVELDETECT1); | ||
1492 | __raw_writel(old0 | l, bank->base + | ||
1493 | OMAP4_GPIO_LEVELDETECT0); | ||
1494 | __raw_writel(old1 | l, bank->base + | ||
1495 | OMAP4_GPIO_LEVELDETECT1); | ||
1496 | __raw_writel(old0, bank->base + | ||
1497 | OMAP4_GPIO_LEVELDETECT0); | ||
1498 | __raw_writel(old1, bank->base + | ||
1499 | OMAP4_GPIO_LEVELDETECT1); | ||
1500 | } | ||
1501 | } | 1314 | } |
1315 | __raw_writel(old0, bank->base + bank->regs->leveldetect0); | ||
1316 | __raw_writel(old1, bank->base + bank->regs->leveldetect1); | ||
1502 | } | 1317 | } |
1503 | 1318 | ||
1319 | bank->workaround_enabled = false; | ||
1320 | spin_unlock_irqrestore(&bank->lock, flags); | ||
1321 | |||
1322 | return 0; | ||
1504 | } | 1323 | } |
1324 | #endif /* CONFIG_PM_RUNTIME */ | ||
1505 | 1325 | ||
1506 | #endif | 1326 | void omap2_gpio_prepare_for_idle(int pwr_mode) |
1327 | { | ||
1328 | struct gpio_bank *bank; | ||
1329 | |||
1330 | list_for_each_entry(bank, &omap_gpio_list, node) { | ||
1331 | if (!bank->mod_usage || !bank->loses_context) | ||
1332 | continue; | ||
1333 | |||
1334 | bank->power_mode = pwr_mode; | ||
1335 | |||
1336 | pm_runtime_put_sync_suspend(bank->dev); | ||
1337 | } | ||
1338 | } | ||
1507 | 1339 | ||
1508 | #ifdef CONFIG_ARCH_OMAP3 | 1340 | void omap2_gpio_resume_after_idle(void) |
1509 | /* save the registers of bank 2-6 */ | ||
1510 | void omap_gpio_save_context(void) | ||
1511 | { | 1341 | { |
1512 | int i; | 1342 | struct gpio_bank *bank; |
1513 | 1343 | ||
1514 | /* saving banks from 2-6 only since GPIO1 is in WKUP */ | 1344 | list_for_each_entry(bank, &omap_gpio_list, node) { |
1515 | for (i = 1; i < gpio_bank_count; i++) { | 1345 | if (!bank->mod_usage || !bank->loses_context) |
1516 | struct gpio_bank *bank = &gpio_bank[i]; | 1346 | continue; |
1517 | gpio_context[i].irqenable1 = | 1347 | |
1518 | __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); | 1348 | pm_runtime_get_sync(bank->dev); |
1519 | gpio_context[i].irqenable2 = | ||
1520 | __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); | ||
1521 | gpio_context[i].wake_en = | ||
1522 | __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); | ||
1523 | gpio_context[i].ctrl = | ||
1524 | __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); | ||
1525 | gpio_context[i].oe = | ||
1526 | __raw_readl(bank->base + OMAP24XX_GPIO_OE); | ||
1527 | gpio_context[i].leveldetect0 = | ||
1528 | __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); | ||
1529 | gpio_context[i].leveldetect1 = | ||
1530 | __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); | ||
1531 | gpio_context[i].risingdetect = | ||
1532 | __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); | ||
1533 | gpio_context[i].fallingdetect = | ||
1534 | __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); | ||
1535 | gpio_context[i].dataout = | ||
1536 | __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); | ||
1537 | } | 1349 | } |
1538 | } | 1350 | } |
1539 | 1351 | ||
1540 | /* restore the required registers of bank 2-6 */ | 1352 | #if defined(CONFIG_PM_RUNTIME) |
1541 | void omap_gpio_restore_context(void) | 1353 | static void omap_gpio_restore_context(struct gpio_bank *bank) |
1542 | { | 1354 | { |
1543 | int i; | 1355 | __raw_writel(bank->context.wake_en, |
1544 | 1356 | bank->base + bank->regs->wkup_en); | |
1545 | for (i = 1; i < gpio_bank_count; i++) { | 1357 | __raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl); |
1546 | struct gpio_bank *bank = &gpio_bank[i]; | 1358 | __raw_writel(bank->context.leveldetect0, |
1547 | __raw_writel(gpio_context[i].irqenable1, | 1359 | bank->base + bank->regs->leveldetect0); |
1548 | bank->base + OMAP24XX_GPIO_IRQENABLE1); | 1360 | __raw_writel(bank->context.leveldetect1, |
1549 | __raw_writel(gpio_context[i].irqenable2, | 1361 | bank->base + bank->regs->leveldetect1); |
1550 | bank->base + OMAP24XX_GPIO_IRQENABLE2); | 1362 | __raw_writel(bank->context.risingdetect, |
1551 | __raw_writel(gpio_context[i].wake_en, | 1363 | bank->base + bank->regs->risingdetect); |
1552 | bank->base + OMAP24XX_GPIO_WAKE_EN); | 1364 | __raw_writel(bank->context.fallingdetect, |
1553 | __raw_writel(gpio_context[i].ctrl, | 1365 | bank->base + bank->regs->fallingdetect); |
1554 | bank->base + OMAP24XX_GPIO_CTRL); | 1366 | if (bank->regs->set_dataout && bank->regs->clr_dataout) |
1555 | __raw_writel(gpio_context[i].oe, | 1367 | __raw_writel(bank->context.dataout, |
1556 | bank->base + OMAP24XX_GPIO_OE); | 1368 | bank->base + bank->regs->set_dataout); |
1557 | __raw_writel(gpio_context[i].leveldetect0, | 1369 | else |
1558 | bank->base + OMAP24XX_GPIO_LEVELDETECT0); | 1370 | __raw_writel(bank->context.dataout, |
1559 | __raw_writel(gpio_context[i].leveldetect1, | 1371 | bank->base + bank->regs->dataout); |
1560 | bank->base + OMAP24XX_GPIO_LEVELDETECT1); | 1372 | __raw_writel(bank->context.oe, bank->base + bank->regs->direction); |
1561 | __raw_writel(gpio_context[i].risingdetect, | 1373 | |
1562 | bank->base + OMAP24XX_GPIO_RISINGDETECT); | 1374 | if (bank->dbck_enable_mask) { |
1563 | __raw_writel(gpio_context[i].fallingdetect, | 1375 | __raw_writel(bank->context.debounce, bank->base + |
1564 | bank->base + OMAP24XX_GPIO_FALLINGDETECT); | 1376 | bank->regs->debounce); |
1565 | __raw_writel(gpio_context[i].dataout, | 1377 | __raw_writel(bank->context.debounce_en, |
1566 | bank->base + OMAP24XX_GPIO_DATAOUT); | 1378 | bank->base + bank->regs->debounce_en); |
1567 | } | 1379 | } |
1380 | |||
1381 | __raw_writel(bank->context.irqenable1, | ||
1382 | bank->base + bank->regs->irqenable); | ||
1383 | __raw_writel(bank->context.irqenable2, | ||
1384 | bank->base + bank->regs->irqenable2); | ||
1568 | } | 1385 | } |
1386 | #endif /* CONFIG_PM_RUNTIME */ | ||
1387 | #else | ||
1388 | #define omap_gpio_suspend NULL | ||
1389 | #define omap_gpio_resume NULL | ||
1390 | #define omap_gpio_runtime_suspend NULL | ||
1391 | #define omap_gpio_runtime_resume NULL | ||
1569 | #endif | 1392 | #endif |
1570 | 1393 | ||
1394 | static const struct dev_pm_ops gpio_pm_ops = { | ||
1395 | SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume) | ||
1396 | SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume, | ||
1397 | NULL) | ||
1398 | }; | ||
1399 | |||
1571 | static struct platform_driver omap_gpio_driver = { | 1400 | static struct platform_driver omap_gpio_driver = { |
1572 | .probe = omap_gpio_probe, | 1401 | .probe = omap_gpio_probe, |
1573 | .driver = { | 1402 | .driver = { |
1574 | .name = "omap_gpio", | 1403 | .name = "omap_gpio", |
1404 | .pm = &gpio_pm_ops, | ||
1575 | }, | 1405 | }, |
1576 | }; | 1406 | }; |
1577 | 1407 | ||
@@ -1585,17 +1415,3 @@ static int __init omap_gpio_drv_reg(void) | |||
1585 | return platform_driver_register(&omap_gpio_driver); | 1415 | return platform_driver_register(&omap_gpio_driver); |
1586 | } | 1416 | } |
1587 | postcore_initcall(omap_gpio_drv_reg); | 1417 | postcore_initcall(omap_gpio_drv_reg); |
1588 | |||
1589 | static int __init omap_gpio_sysinit(void) | ||
1590 | { | ||
1591 | mpuio_init(); | ||
1592 | |||
1593 | #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) | ||
1594 | if (cpu_is_omap16xx() || cpu_class_is_omap2()) | ||
1595 | register_syscore_ops(&omap_gpio_syscore_ops); | ||
1596 | #endif | ||
1597 | |||
1598 | return 0; | ||
1599 | } | ||
1600 | |||
1601 | arch_initcall(omap_gpio_sysinit); | ||