1 files changed, 78 insertions, 5 deletions

diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index 56138893819a..0fdbe94f24a3 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -19,6 +19,29 @@
 #define DRV_NAME "cs5535-gpio"
 #define GPIO_BAR 1
 
+/*
+ * Some GPIO pins
+ *  31-29,23 : reserved (always mask out)
+ *  28       : Power Button
+ *  26       : PME#
+ *  22-16    : LPC
+ *  14,15    : SMBus
+ *  9,8      : UART1
+ *  7        : PCI INTB
+ *  3,4      : UART2/DDC
+ *  2        : IDE_IRQ0
+ *  1        : AC_BEEP
+ *  0        : PCI INTA
+ *
+ * If a mask was not specified, allow all except
+ * reserved and Power Button
+ */
+#define GPIO_DEFAULT_MASK 0x0F7FFFFF
+
+static ulong mask = GPIO_DEFAULT_MASK;
+module_param_named(mask, mask, ulong, 0444);
+MODULE_PARM_DESC(mask, "GPIO channel mask.");
+
 static struct cs5535_gpio_chip {
         struct gpio_chip chip;
         resource_size_t base;
@@ -102,6 +125,33 @@ EXPORT_SYMBOL_GPL(cs5535_gpio_isset);
  * Generic gpio_chip API support.
  */
 
+static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
+{
+        struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
+        unsigned long flags;
+
+        spin_lock_irqsave(&chip->lock, flags);
+
+        /* check if this pin is available */
+        if ((mask & (1 << offset)) == 0) {
+                dev_info(&chip->pdev->dev,
+                        "pin %u is not available (check mask)\n", offset);
+                spin_unlock_irqrestore(&chip->lock, flags);
+                return -EINVAL;
+        }
+
+        /* disable output aux 1 & 2 on this pin */
+        __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1);
+        __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2);
+
+        /* disable input aux 1 on this pin */
+        __cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1);
+
+        spin_unlock_irqrestore(&chip->lock, flags);
+
+        return 0;
+}
+
 static int chip_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
         return cs5535_gpio_isset(offset, GPIO_OUTPUT_VAL);
@@ -145,13 +195,26 @@ static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val)
         return 0;
 }
 
+static char *cs5535_gpio_names[] = {
+        "GPIO0", "GPIO1", "GPIO2", "GPIO3",
+        "GPIO4", "GPIO5", "GPIO6", "GPIO7",
+        "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+        "GPIO12", "GPIO13", "GPIO14", "GPIO15",
+        "GPIO16", "GPIO17", "GPIO18", "GPIO19",
+        "GPIO20", "GPIO21", "GPIO22", NULL,
+        "GPIO24", "GPIO25", "GPIO26", "GPIO27",
+        "GPIO28", NULL, NULL, NULL,
+};
+
 static struct cs5535_gpio_chip cs5535_gpio_chip = {
         .chip = {
                 .owner = THIS_MODULE,
                 .label = DRV_NAME,
 
                 .base = 0,
-                .ngpio = 28,
+                .ngpio = 32,
+                .names = cs5535_gpio_names,
+                .request = chip_gpio_request,
 
                 .get = chip_gpio_get,
                 .set = chip_gpio_set,
@@ -165,6 +228,7 @@ static int __init cs5535_gpio_probe(struct pci_dev *pdev,
                 const struct pci_device_id *pci_id)
 {
         int err;
+        ulong mask_orig = mask;
 
         /* There are two ways to get the GPIO base address; one is by
          * fetching it from MSR_LBAR_GPIO, the other is by reading the
@@ -193,14 +257,23 @@ static int __init cs5535_gpio_probe(struct pci_dev *pdev,
         dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR,
                         (unsigned long long) cs5535_gpio_chip.base);
 
+        /* mask out reserved pins */
+        mask &= 0x1F7FFFFF;
+
+        /* do not allow pin 28, Power Button, as there's special handling
+         * in the PMC needed. (note 12, p. 48) */
+        mask &= ~(1 << 28);
+
+        if (mask_orig != mask)
+                dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
+                                mask_orig, mask);
+
         /* finally, register with the generic GPIO API */
         err = gpiochip_add(&cs5535_gpio_chip.chip);
-        if (err) {
-                dev_err(&pdev->dev, "failed to register gpio chip\n");
+        if (err)
                 goto release_region;
-        }
 
-        printk(KERN_INFO DRV_NAME ": GPIO support successfully loaded.\n");
+        dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n");
         return 0;
 
 release_region: