1 files changed, 258 insertions, 0 deletions

diff --git a/drivers/gpio/janz-ttl.c b/drivers/gpio/janz-ttl.c
new file mode 100644
index 000000000000..813ac077e5d7
--- /dev/null
+++ b/drivers/gpio/janz-ttl.c
@@ -0,0 +1,258 @@
+/*
+ * Janz MODULbus VMOD-TTL GPIO Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/janz.h>
+
+#define DRV_NAME "janz-ttl"
+
+#define PORTA_DIRECTION         0x23
+#define PORTB_DIRECTION         0x2B
+#define PORTC_DIRECTION         0x06
+#define PORTA_IOCTL             0x24
+#define PORTB_IOCTL             0x2C
+#define PORTC_IOCTL             0x07
+
+#define MASTER_INT_CTL          0x00
+#define MASTER_CONF_CTL         0x01
+
+#define CONF_PAE                (1 << 2)
+#define CONF_PBE                (1 << 7)
+#define CONF_PCE                (1 << 4)
+
+struct ttl_control_regs {
+        __be16 portc;
+        __be16 portb;
+        __be16 porta;
+        __be16 control;
+};
+
+struct ttl_module {
+        struct gpio_chip gpio;
+
+        /* base address of registers */
+        struct ttl_control_regs __iomem *regs;
+
+        u8 portc_shadow;
+        u8 portb_shadow;
+        u8 porta_shadow;
+
+        spinlock_t lock;
+};
+
+static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
+{
+        struct ttl_module *mod = dev_get_drvdata(gpio->dev);
+        u8 *shadow;
+        int ret;
+
+        if (offset < 8) {
+                shadow = &mod->porta_shadow;
+        } else if (offset < 16) {
+                shadow = &mod->portb_shadow;
+                offset -= 8;
+        } else {
+                shadow = &mod->portc_shadow;
+                offset -= 16;
+        }
+
+        spin_lock(&mod->lock);
+        ret = *shadow & (1 << offset);
+        spin_unlock(&mod->lock);
+        return ret;
+}
+
+static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
+{
+        struct ttl_module *mod = dev_get_drvdata(gpio->dev);
+        void __iomem *port;
+        u8 *shadow;
+
+        if (offset < 8) {
+                port = &mod->regs->porta;
+                shadow = &mod->porta_shadow;
+        } else if (offset < 16) {
+                port = &mod->regs->portb;
+                shadow = &mod->portb_shadow;
+                offset -= 8;
+        } else {
+                port = &mod->regs->portc;
+                shadow = &mod->portc_shadow;
+                offset -= 16;
+        }
+
+        spin_lock(&mod->lock);
+        if (value)
+                *shadow |= (1 << offset);
+        else
+                *shadow &= ~(1 << offset);
+
+        iowrite16be(*shadow, port);
+        spin_unlock(&mod->lock);
+}
+
+static void __devinit ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
+{
+        iowrite16be(reg, &mod->regs->control);
+        iowrite16be(val, &mod->regs->control);
+}
+
+static void __devinit ttl_setup_device(struct ttl_module *mod)
+{
+        /* reset the device to a known state */
+        iowrite16be(0x0000, &mod->regs->control);
+        iowrite16be(0x0001, &mod->regs->control);
+        iowrite16be(0x0000, &mod->regs->control);
+
+        /* put all ports in open-drain mode */
+        ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
+        ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
+        ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
+
+        /* set all ports as outputs */
+        ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
+        ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
+        ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
+
+        /* set all ports to drive zeroes */
+        iowrite16be(0x0000, &mod->regs->porta);
+        iowrite16be(0x0000, &mod->regs->portb);
+        iowrite16be(0x0000, &mod->regs->portc);
+
+        /* enable all ports */
+        ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
+}
+
+static int __devinit ttl_probe(struct platform_device *pdev)
+{
+        struct janz_platform_data *pdata;
+        struct device *dev = &pdev->dev;
+        struct ttl_module *mod;
+        struct gpio_chip *gpio;
+        struct resource *res;
+        int ret;
+
+        pdata = pdev->dev.platform_data;
+        if (!pdata) {
+                dev_err(dev, "no platform data\n");
+                ret = -ENXIO;
+                goto out_return;
+        }
+
+        mod = kzalloc(sizeof(*mod), GFP_KERNEL);
+        if (!mod) {
+                dev_err(dev, "unable to allocate private data\n");
+                ret = -ENOMEM;
+                goto out_return;
+        }
+
+        platform_set_drvdata(pdev, mod);
+        spin_lock_init(&mod->lock);
+
+        /* get access to the MODULbus registers for this module */
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_err(dev, "MODULbus registers not found\n");
+                ret = -ENODEV;
+                goto out_free_mod;
+        }
+
+        mod->regs = ioremap(res->start, resource_size(res));
+        if (!mod->regs) {
+                dev_err(dev, "MODULbus registers not ioremap\n");
+                ret = -ENOMEM;
+                goto out_free_mod;
+        }
+
+        ttl_setup_device(mod);
+
+        /* Initialize the GPIO data structures */
+        gpio = &mod->gpio;
+        gpio->dev = &pdev->dev;
+        gpio->label = pdev->name;
+        gpio->get = ttl_get_value;
+        gpio->set = ttl_set_value;
+        gpio->owner = THIS_MODULE;
+
+        /* request dynamic allocation */
+        gpio->base = -1;
+        gpio->ngpio = 20;
+
+        ret = gpiochip_add(gpio);
+        if (ret) {
+                dev_err(dev, "unable to add GPIO chip\n");
+                goto out_iounmap_regs;
+        }
+
+        dev_info(&pdev->dev, "module %d: registered GPIO device\n",
+                             pdata->modno);
+        return 0;
+
+out_iounmap_regs:
+        iounmap(mod->regs);
+out_free_mod:
+        kfree(mod);
+out_return:
+        return ret;
+}
+
+static int __devexit ttl_remove(struct platform_device *pdev)
+{
+        struct ttl_module *mod = platform_get_drvdata(pdev);
+        struct device *dev = &pdev->dev;
+        int ret;
+
+        ret = gpiochip_remove(&mod->gpio);
+        if (ret) {
+                dev_err(dev, "unable to remove GPIO chip\n");
+                return ret;
+        }
+
+        iounmap(mod->regs);
+        kfree(mod);
+        return 0;
+}
+
+static struct platform_driver ttl_driver = {
+        .driver         = {
+                .name   = DRV_NAME,
+                .owner  = THIS_MODULE,
+        },
+        .probe          = ttl_probe,
+        .remove         = __devexit_p(ttl_remove),
+};
+
+static int __init ttl_init(void)
+{
+        return platform_driver_register(&ttl_driver);
+}
+
+static void __exit ttl_exit(void)
+{
+        platform_driver_unregister(&ttl_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:janz-ttl");
+
+module_init(ttl_init);
+module_exit(ttl_exit);