1 files changed, 549 insertions, 0 deletions

diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
new file mode 100644
index 000000000000..06a31da2381c
--- /dev/null
+++ b/drivers/char/watchdog/Kconfig
@@ -0,0 +1,549 @@
+#
+# Watchdog device configuration
+#
+
+menu "Watchdog Cards"
+
+config WATCHDOG
+        bool "Watchdog Timer Support"
+        ---help---
+          If you say Y here (and to one of the following options) and create a
+          character special file /dev/watchdog with major number 10 and minor
+          number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
+          subsequently opening the file and then failing to write to it for
+          longer than 1 minute will result in rebooting the machine. This
+          could be useful for a networked machine that needs to come back
+          online as fast as possible after a lock-up. There's both a watchdog
+          implementation entirely in software (which can sometimes fail to
+          reboot the machine) and a driver for hardware watchdog boards, which
+          are more robust and can also keep track of the temperature inside
+          your computer. For details, read <file:Documentation/watchdog/watchdog.txt>
+          in the kernel source.
+
+          The watchdog is usually used together with the watchdog daemon
+          which is available from
+          <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
+          also monitor NFS connections and can reboot the machine when the process
+          table is full.
+
+          If unsure, say N.
+
+config WATCHDOG_NOWAYOUT
+        bool "Disable watchdog shutdown on close"
+        depends on WATCHDOG
+        help
+          The default watchdog behaviour (which you get if you say N here) is
+          to stop the timer if the process managing it closes the file
+          /dev/watchdog. It's always remotely possible that this process might
+          get killed. If you say Y here, the watchdog cannot be stopped once
+          it has been started.
+
+#
+# General Watchdog drivers
+#
+
+comment "Watchdog Device Drivers"
+        depends on WATCHDOG
+
+# Architecture Independant
+
+config SOFT_WATCHDOG
+        tristate "Software watchdog"
+        depends on WATCHDOG
+        help
+          A software monitoring watchdog. This will fail to reboot your system
+          from some situations that the hardware watchdog will recover
+          from. Equally it's a lot cheaper to install.
+
+          To compile this driver as a module, choose M here: the
+          module will be called softdog.
+
+# ARM Architecture
+
+config 21285_WATCHDOG
+        tristate "DC21285 watchdog"
+        depends on WATCHDOG && FOOTBRIDGE
+        help
+          The Intel Footbridge chip contains a builtin watchdog circuit. Say Y
+          here if you wish to use this. Alternatively say M to compile the
+          driver as a module, which will be called wdt285.
+
+          This driver does not work on all machines. In particular, early CATS
+          boards have hardware problems that will cause the machine to simply
+          lock up if the watchdog fires.
+
+          "If in doubt, leave it out" - say N.
+
+config 977_WATCHDOG
+        tristate "NetWinder WB83C977 watchdog"
+        depends on WATCHDOG && FOOTBRIDGE && ARCH_NETWINDER
+        help
+          Say Y here to include support for the WB977 watchdog included in
+          NetWinder machines. Alternatively say M to compile the driver as
+          a module, which will be called wdt977.
+
+          Not sure? It's safe to say N.
+
+config IXP4XX_WATCHDOG
+        tristate "IXP4xx Watchdog"
+        depends on WATCHDOG && ARCH_IXP4XX
+        help
+          Say Y here if to include support for the watchdog timer
+          in the Intel IXP4xx network processors. This driver can
+          be built as a module by choosing M. The module will
+          be called ixp4xx_wdt.
+
+          Note: The internal IXP4xx watchdog does a soft CPU reset
+          which doesn't reset any peripherals. There are circumstances
+          where the watchdog will fail to reset the board correctly
+          (e.g., if the boot ROM is in an unreadable state).
+
+          Say N if you are unsure.
+
+config IXP2000_WATCHDOG
+        tristate "IXP2000 Watchdog"
+        depends on WATCHDOG && ARCH_IXP2000
+        help
+          Say Y here if to include support for the watchdog timer
+          in the Intel IXP2000(2400, 2800, 2850) network processors.
+          This driver can be built as a module by choosing M. The module
+          will be called ixp2000_wdt.
+
+          Say N if you are unsure.
+
+config S3C2410_WATCHDOG
+        tristate "S3C2410 Watchdog"
+        depends on WATCHDOG && ARCH_S3C2410
+        help
+          Watchdog timer block in the Samsung S3C2410 chips. This will
+          reboot the system when the timer expires with the watchdog
+          enabled.
+
+          The driver is limited by the speed of the system's PCLK
+          signal, so with reasonbaly fast systems (PCLK around 50-66MHz)
+          then watchdog intervals of over approximately 20seconds are
+          unavailable.
+
+          The driver can be built as a module by choosing M, and will
+          be called s3c2410_wdt
+
+config SA1100_WATCHDOG
+        tristate "SA1100/PXA2xx watchdog"
+        depends on WATCHDOG && ( ARCH_SA1100 || ARCH_PXA )
+        help
+          Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
+          reboot your system when timeout is reached.
+
+          NOTE: once enabled, this timer cannot be disabled.
+
+          To compile this driver as a module, choose M here: the
+          module will be called sa1100_wdt.
+
+# X86 (i386 + ia64 + x86_64) Architecture
+
+config ACQUIRE_WDT
+        tristate "Acquire SBC Watchdog Timer"
+        depends on WATCHDOG && X86
+        ---help---
+          This is the driver for the hardware watchdog on Single Board
+          Computers produced by Acquire Inc (and others). This watchdog
+          simply watches your kernel to make sure it doesn't freeze, and if
+          it does, it reboots your computer after a certain amount of time.
+
+          To compile this driver as a module, choose M here: the
+          module will be called acquirewdt.
+
+          Most people will say N.
+
+config ADVANTECH_WDT
+        tristate "Advantech SBC Watchdog Timer"
+        depends on WATCHDOG && X86
+        help
+          If you are configuring a Linux kernel for the Advantech single-board
+          computer, say `Y' here to support its built-in watchdog timer
+          feature. More information can be found at
+          <http://www.advantech.com.tw/products/>
+
+config ALIM1535_WDT
+        tristate "ALi M1535 PMU Watchdog Timer"
+        depends on WATCHDOG && X86 && PCI
+        ---help---
+          This is the driver for the hardware watchdog on the ALi M1535 PMU.
+
+          To compile this driver as a module, choose M here: the
+          module will be called alim1535_wdt.
+
+          Most people will say N.
+
+config ALIM7101_WDT
+        tristate "ALi M7101 PMU Computer Watchdog"
+        depends on WATCHDOG && X86 && PCI
+        help
+          This is the driver for the hardware watchdog on the ALi M7101 PMU
+          as used in the x86 Cobalt servers.
+
+          To compile this driver as a module, choose M here: the
+          module will be called alim7101_wdt.
+
+          Most people will say N.
+
+config SC520_WDT
+        tristate "AMD Elan SC520 processor Watchdog"
+        depends on WATCHDOG && X86
+        help
+          This is the driver for the hardware watchdog built in to the
+          AMD "Elan" SC520 microcomputer commonly used in embedded systems.
+          This watchdog simply watches your kernel to make sure it doesn't
+          freeze, and if it does, it reboots your computer after a certain
+          amount of time.
+
+          You can compile this driver directly into the kernel, or use
+          it as a module.  The module will be called sc520_wdt.
+
+config EUROTECH_WDT
+        tristate "Eurotech CPU-1220/1410 Watchdog Timer"
+        depends on WATCHDOG && X86
+        help
+          Enable support for the watchdog timer on the Eurotech CPU-1220 and
+          CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
+          information are at <http://www.eurotech.it/>.
+
+config IB700_WDT
+        tristate "IB700 SBC Watchdog Timer"
+        depends on WATCHDOG && X86
+        ---help---
+          This is the driver for the hardware watchdog on the IB700 Single
+          Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
+          simply watches your kernel to make sure it doesn't freeze, and if
+          it does, it reboots your computer after a certain amount of time.
+
+          This driver is like the WDT501 driver but for slightly different hardware.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ib700wdt.
+
+          Most people will say N.
+
+config WAFER_WDT
+        tristate "ICP Wafer 5823 Single Board Computer Watchdog"
+        depends on WATCHDOG && X86
+        help
+          This is a driver for the hardware watchdog on the ICP Wafer 5823
+          Single Board Computer (and probably other similar models).
+
+          To compile this driver as a module, choose M here: the
+          module will be called wafer5823wdt.
+
+config I8XX_TCO
+        tristate "Intel i8xx TCO Timer/Watchdog"
+        depends on WATCHDOG && (X86 || IA64) && PCI
+        ---help---
+          Hardware driver for the TCO timer built into the Intel 82801
+          I/O Controller Hub family.  The TCO (Total Cost of Ownership)
+          timer is a watchdog timer that will reboot the machine after
+          its second expiration. The expiration time can be configured
+          with the "heartbeat" parameter.
+
+          On some motherboards the driver may fail to reset the chipset's
+          NO_REBOOT flag which prevents the watchdog from rebooting the
+          machine. If this is the case you will get a kernel message like
+          "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+          To compile this driver as a module, choose M here: the
+          module will be called i8xx_tco.
+
+config SC1200_WDT
+        tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
+        depends on WATCHDOG && X86
+        help
+          This is a driver for National Semiconductor PC87307/PC97307 hardware
+          watchdog cards as found on the SC1200. This watchdog is mainly used
+          for power management purposes and can be used to power down the device
+          during inactivity periods (includes interrupt activity monitoring).
+
+          To compile this driver as a module, choose M here: the
+          module will be called sc1200wdt.
+
+          Most people will say N.
+
+config SCx200_WDT
+        tristate "National Semiconductor SCx200 Watchdog"
+        depends on WATCHDOG && SCx200 && PCI
+        help
+          Enable the built-in watchdog timer support on the National
+          Semiconductor SCx200 processors.
+
+          If compiled as a module, it will be called scx200_wdt.
+
+config 60XX_WDT
+        tristate "SBC-60XX Watchdog Timer"
+        depends on WATCHDOG && X86
+        help
+          This driver can be used with the watchdog timer found on some
+          single board computers, namely the 6010 PII based computer.
+          It may well work with other cards.  It reads port 0x443 to enable
+          and re-set the watchdog timer, and reads port 0x45 to disable
+          the watchdog.  If you have a card that behave in similar ways,
+          you can probably make this driver work with your card as well.
+
+          You can compile this driver directly into the kernel, or use
+          it as a module.  The module will be called sbc60xxwdt.
+
+config CPU5_WDT
+        tristate "SMA CPU5 Watchdog"
+        depends on WATCHDOG && X86
+        ---help---
+          TBD.
+          To compile this driver as a module, choose M here: the
+          module will be called cpu5wdt.
+
+config W83627HF_WDT
+        tristate "W83627HF Watchdog Timer"
+        depends on WATCHDOG && X86
+        ---help---
+          This is the driver for the hardware watchdog on the W83627HF chipset
+          as used in Advantech PC-9578 and Tyan S2721-533 motherboards
+          (and likely others).  This watchdog simply watches your kernel to
+          make sure it doesn't freeze, and if it does, it reboots your computer
+          after a certain amount of time.
+
+          To compile this driver as a module, choose M here: the
+          module will be called w83627hf_wdt.
+
+          Most people will say N.
+
+config W83877F_WDT
+        tristate "W83877F (EMACS) Watchdog Timer"
+        depends on WATCHDOG && X86
+        ---help---
+          This is the driver for the hardware watchdog on the W83877F chipset
+          as used in EMACS PC-104 motherboards (and likely others).  This
+          watchdog simply watches your kernel to make sure it doesn't freeze,
+          and if it does, it reboots your computer after a certain amount of
+          time.
+
+          To compile this driver as a module, choose M here: the
+          module will be called w83877f_wdt.
+
+          Most people will say N.
+
+config MACHZ_WDT
+        tristate "ZF MachZ Watchdog"
+        depends on WATCHDOG && X86
+        ---help---
+          If you are using a ZF Micro MachZ processor, say Y here, otherwise
+          N.  This is the driver for the watchdog timer builtin on that
+          processor using ZF-Logic interface.  This watchdog simply watches
+          your kernel to make sure it doesn't freeze, and if it does, it
+          reboots your computer after a certain amount of time.
+
+          To compile this driver as a module, choose M here: the
+          module will be called machzwd.
+
+# PowerPC Architecture
+
+config 8xx_WDT
+        tristate "MPC8xx Watchdog Timer"
+        depends on WATCHDOG && 8xx
+
+# MIPS Architecture
+
+config INDYDOG
+        tristate "Indy/I2 Hardware Watchdog"
+        depends on WATCHDOG && SGI_IP22
+        help
+          Hardwaredriver for the Indy's/I2's watchdog. This is a
+          watchdog timer that will reboot the machine after a 60 second
+          timer expired and no process has written to /dev/watchdog during
+          that time.
+
+# S390 Architecture
+
+config ZVM_WATCHDOG
+        tristate "z/VM Watchdog Timer"
+        depends on WATCHDOG && ARCH_S390
+        help
+          IBM s/390 and zSeries machines running under z/VM 5.1 or later
+          provide a virtual watchdog timer to their guest that cause a
+          user define Control Program command to be executed after a
+          timeout.
+
+          To compile this driver as a module, choose M here. The module
+          will be called vmwatchdog.
+
+# SUPERH Architecture
+
+config SH_WDT
+        tristate "SuperH Watchdog"
+        depends on WATCHDOG && SUPERH
+        help
+          This driver adds watchdog support for the integrated watchdog in the
+          SuperH processors. If you have one of these processors and wish
+          to have watchdog support enabled, say Y, otherwise say N.
+
+          As a side note, saying Y here will automatically boost HZ to 1000
+          so that the timer has a chance to clear the overflow counter. On
+          slower systems (such as the SH-2 and SH-3) this will likely yield
+          some performance issues. As such, the WDT should be avoided here
+          unless it is absolutely necessary.
+
+          To compile this driver as a module, choose M here: the
+          module will be called shwdt.
+
+# SPARC64 Architecture
+
+config WATCHDOG_CP1XXX
+        tristate "CP1XXX Hardware Watchdog support"
+        depends on WATCHDOG && SPARC64 && PCI
+        ---help---
+          This is the driver for the hardware watchdog timers present on
+          Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cpwatchdog.
+
+          If you do not have a CompactPCI model CP1400 or CP1500, or
+          another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
+          you should say N to this option.
+
+config WATCHDOG_RIO
+        tristate "RIO Hardware Watchdog support"
+        depends on WATCHDOG && SPARC64 && PCI
+        help
+          Say Y here to support the hardware watchdog capability on Sun RIO
+          machines.  The watchdog timeout period is normally one minute but
+          can be changed with a boot-time parameter.
+
+#
+# ISA-based Watchdog Cards
+#
+
+comment "ISA-based Watchdog Cards"
+        depends on WATCHDOG && ISA
+
+config PCWATCHDOG
+        tristate "Berkshire Products ISA-PC Watchdog"
+        depends on WATCHDOG && ISA
+        ---help---
+          This is the driver for the Berkshire Products ISA-PC Watchdog card.
+          This card simply watches your kernel to make sure it doesn't freeze,
+          and if it does, it reboots your computer after a certain amount of
+          time. This driver is like the WDT501 driver but for different
+          hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
+          watchdog cards can be ordered from <http://www.berkprod.com/>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called pcwd.
+
+          Most people will say N.
+
+config MIXCOMWD
+        tristate "Mixcom Watchdog"
+        depends on WATCHDOG && ISA
+        ---help---
+          This is a driver for the Mixcom hardware watchdog cards.  This
+          watchdog simply watches your kernel to make sure it doesn't freeze,
+          and if it does, it reboots your computer after a certain amount of
+          time.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mixcomwd.
+
+          Most people will say N.
+
+config WDT
+        tristate "WDT Watchdog timer"
+        depends on WATCHDOG && ISA
+        ---help---
+          If you have a WDT500P or WDT501P watchdog board, say Y here,
+          otherwise N. It is not possible to probe for this board, which means
+          that you have to inform the kernel about the IO port and IRQ that
+          is needed (you can do this via the io and irq parameters)
+
+          To compile this driver as a module, choose M here: the
+          module will be called wdt.
+
+config WDT_501
+        bool "WDT501 features"
+        depends on WDT
+        help
+          Saying Y here and creating a character special file /dev/temperature
+          with major number 10 and minor number 131 ("man mknod") will give
+          you a thermometer inside your computer: reading from
+          /dev/temperature yields one byte, the temperature in degrees
+          Fahrenheit. This works only if you have a WDT501P watchdog board
+          installed.
+
+          If you want to enable the Fan Tachometer on the WDT501P, then you
+          can do this via the tachometer parameter. Only do this if you have a
+          fan tachometer actually set up.
+
+#
+# PCI-based Watchdog Cards
+#
+
+comment "PCI-based Watchdog Cards"
+        depends on WATCHDOG && PCI
+
+config PCIPCWATCHDOG
+        tristate "Berkshire Products PCI-PC Watchdog"
+        depends on WATCHDOG && PCI
+        ---help---
+          This is the driver for the Berkshire Products PCI-PC Watchdog card.
+          This card simply watches your kernel to make sure it doesn't freeze,
+          and if it does, it reboots your computer after a certain amount of
+          time. The card can also monitor the internal temperature of the PC.
+          More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called pcwd_pci.
+
+          Most people will say N.
+
+config WDTPCI
+        tristate "PCI-WDT500/501 Watchdog timer"
+        depends on WATCHDOG && PCI
+        ---help---
+          If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
+
+          To compile this driver as a module, choose M here: the
+          module will be called wdt_pci.
+
+config WDT_501_PCI
+        bool "PCI-WDT501 features"
+        depends on WDTPCI
+        help
+          Saying Y here and creating a character special file /dev/temperature
+          with major number 10 and minor number 131 ("man mknod") will give
+          you a thermometer inside your computer: reading from
+          /dev/temperature yields one byte, the temperature in degrees
+          Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
+          installed.
+
+          If you want to enable the Fan Tachometer on the PCI-WDT501, then you
+          can do this via the tachometer parameter. Only do this if you have a
+          fan tachometer actually set up.
+
+#
+# USB-based Watchdog Cards
+#
+
+comment "USB-based Watchdog Cards"
+        depends on WATCHDOG && USB
+
+config USBPCWATCHDOG
+        tristate "Berkshire Products USB-PC Watchdog"
+        depends on WATCHDOG && USB
+        ---help---
+          This is the driver for the Berkshire Products USB-PC Watchdog card.
+          This card simply watches your kernel to make sure it doesn't freeze,
+          and if it does, it reboots your computer after a certain amount of
+          time. The card can also monitor the internal temperature of the PC.
+          More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called pcwd_usb.
+
+          Most people will say N.
+
+endmenu