aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char/mxser.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/mxser.c')
-rw-r--r--drivers/char/mxser.c3170
1 files changed, 3170 insertions, 0 deletions
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
new file mode 100644
index 000000000000..7a245068e3e5
--- /dev/null
+++ b/drivers/char/mxser.c
@@ -0,0 +1,3170 @@
1/*
2 * mxser.c -- MOXA Smartio/Industio family multiport serial driver.
3 *
4 * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw).
5 *
6 * This code is loosely based on the Linux serial driver, written by
7 * Linus Torvalds, Theodore T'so and others.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12* (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 * Original release 10/26/00
24 *
25 * 02/06/01 Support MOXA Industio family boards.
26 * 02/06/01 Support TIOCGICOUNT.
27 * 02/06/01 Fix the problem for connecting to serial mouse.
28 * 02/06/01 Fix the problem for H/W flow control.
29 * 02/06/01 Fix the compling warning when CONFIG_PCI
30 * don't be defined.
31 *
32 * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
33 * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
34 * - Fixed x86_64 cleanness
35 * - Fixed sleep with spinlock held in mxser_send_break
36 */
37
38
39#include <linux/config.h>
40#include <linux/module.h>
41#include <linux/version.h>
42#include <linux/autoconf.h>
43#include <linux/errno.h>
44#include <linux/signal.h>
45#include <linux/sched.h>
46#include <linux/timer.h>
47#include <linux/interrupt.h>
48#include <linux/tty.h>
49#include <linux/tty_flip.h>
50#include <linux/serial.h>
51#include <linux/serial_reg.h>
52#include <linux/major.h>
53#include <linux/string.h>
54#include <linux/fcntl.h>
55#include <linux/ptrace.h>
56#include <linux/gfp.h>
57#include <linux/ioport.h>
58#include <linux/mm.h>
59#include <linux/smp_lock.h>
60#include <linux/delay.h>
61#include <linux/pci.h>
62
63#include <asm/system.h>
64#include <asm/io.h>
65#include <asm/irq.h>
66#include <asm/segment.h>
67#include <asm/bitops.h>
68#include <asm/uaccess.h>
69
70#include "mxser.h"
71
72#define MXSER_VERSION "1.8"
73#define MXSERMAJOR 174
74#define MXSERCUMAJOR 175
75
76#define MXSER_EVENT_TXLOW 1
77#define MXSER_EVENT_HANGUP 2
78
79#define MXSER_BOARDS 4 /* Max. boards */
80#define MXSER_PORTS 32 /* Max. ports */
81#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
82#define MXSER_ISR_PASS_LIMIT 256
83
84#define MXSER_ERR_IOADDR -1
85#define MXSER_ERR_IRQ -2
86#define MXSER_ERR_IRQ_CONFLIT -3
87#define MXSER_ERR_VECTOR -4
88
89#define SERIAL_TYPE_NORMAL 1
90#define SERIAL_TYPE_CALLOUT 2
91
92#define WAKEUP_CHARS 256
93
94#define UART_MCR_AFE 0x20
95#define UART_LSR_SPECIAL 0x1E
96
97#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|IXON|IXOFF))
98
99#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
100
101#define C168_ASIC_ID 1
102#define C104_ASIC_ID 2
103#define C102_ASIC_ID 0xB
104#define CI132_ASIC_ID 4
105#define CI134_ASIC_ID 3
106#define CI104J_ASIC_ID 5
107
108enum {
109 MXSER_BOARD_C168_ISA = 1,
110 MXSER_BOARD_C104_ISA,
111 MXSER_BOARD_CI104J,
112 MXSER_BOARD_C168_PCI,
113 MXSER_BOARD_C104_PCI,
114 MXSER_BOARD_C102_ISA,
115 MXSER_BOARD_CI132,
116 MXSER_BOARD_CI134,
117 MXSER_BOARD_CP132,
118 MXSER_BOARD_CP114,
119 MXSER_BOARD_CT114,
120 MXSER_BOARD_CP102,
121 MXSER_BOARD_CP104U,
122 MXSER_BOARD_CP168U,
123 MXSER_BOARD_CP132U,
124 MXSER_BOARD_CP134U,
125 MXSER_BOARD_CP104JU,
126 MXSER_BOARD_RC7000,
127 MXSER_BOARD_CP118U,
128 MXSER_BOARD_CP102UL,
129 MXSER_BOARD_CP102U,
130};
131
132static char *mxser_brdname[] = {
133 "C168 series",
134 "C104 series",
135 "CI-104J series",
136 "C168H/PCI series",
137 "C104H/PCI series",
138 "C102 series",
139 "CI-132 series",
140 "CI-134 series",
141 "CP-132 series",
142 "CP-114 series",
143 "CT-114 series",
144 "CP-102 series",
145 "CP-104U series",
146 "CP-168U series",
147 "CP-132U series",
148 "CP-134U series",
149 "CP-104JU series",
150 "Moxa UC7000 Serial",
151 "CP-118U series",
152 "CP-102UL series",
153 "CP-102U series",
154};
155
156static int mxser_numports[] = {
157 8, // C168-ISA
158 4, // C104-ISA
159 4, // CI104J
160 8, // C168-PCI
161 4, // C104-PCI
162 2, // C102-ISA
163 2, // CI132
164 4, // CI134
165 2, // CP132
166 4, // CP114
167 4, // CT114
168 2, // CP102
169 4, // CP104U
170 8, // CP168U
171 2, // CP132U
172 4, // CP134U
173 4, // CP104JU
174 8, // RC7000
175 8, // CP118U
176 2, // CP102UL
177 2, // CP102U
178};
179
180#define UART_TYPE_NUM 2
181
182static const unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = {
183 MOXA_MUST_MU150_HWID,
184 MOXA_MUST_MU860_HWID
185};
186
187// This is only for PCI
188#define UART_INFO_NUM 3
189struct mxpciuart_info {
190 int type;
191 int tx_fifo;
192 int rx_fifo;
193 int xmit_fifo_size;
194 int rx_high_water;
195 int rx_trigger;
196 int rx_low_water;
197 long max_baud;
198};
199
200static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = {
201 {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
202 {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
203 {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
204};
205
206
207#ifdef CONFIG_PCI
208
209static struct pci_device_id mxser_pcibrds[] = {
210 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI},
211 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI},
212 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132},
213 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114},
214 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114},
215 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102},
216 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U},
217 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U},
218 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U},
219 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U},
220 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU},
221 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000},
222 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U},
223 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL},
224 {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U},
225 {0}
226};
227
228MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
229
230
231#endif
232
233typedef struct _moxa_pci_info {
234 unsigned short busNum;
235 unsigned short devNum;
236 struct pci_dev *pdev; // add by Victor Yu. 06-23-2003
237} moxa_pci_info;
238
239static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
240static int ttymajor = MXSERMAJOR;
241static int calloutmajor = MXSERCUMAJOR;
242static int verbose = 0;
243
244/* Variables for insmod */
245
246MODULE_AUTHOR("Casper Yang");
247MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
248MODULE_PARM(ioaddr, "1-4i");
249MODULE_PARM(ttymajor, "i");
250MODULE_PARM(calloutmajor, "i");
251MODULE_PARM(verbose, "i");
252MODULE_LICENSE("GPL");
253
254struct mxser_log {
255 int tick;
256 unsigned long rxcnt[MXSER_PORTS];
257 unsigned long txcnt[MXSER_PORTS];
258};
259
260
261struct mxser_mon {
262 unsigned long rxcnt;
263 unsigned long txcnt;
264 unsigned long up_rxcnt;
265 unsigned long up_txcnt;
266 int modem_status;
267 unsigned char hold_reason;
268};
269
270struct mxser_mon_ext {
271 unsigned long rx_cnt[32];
272 unsigned long tx_cnt[32];
273 unsigned long up_rxcnt[32];
274 unsigned long up_txcnt[32];
275 int modem_status[32];
276
277 long baudrate[32];
278 int databits[32];
279 int stopbits[32];
280 int parity[32];
281 int flowctrl[32];
282 int fifo[32];
283 int iftype[32];
284};
285struct mxser_hwconf {
286 int board_type;
287 int ports;
288 int irq;
289 int vector;
290 int vector_mask;
291 int uart_type;
292 int ioaddr[MXSER_PORTS_PER_BOARD];
293 int baud_base[MXSER_PORTS_PER_BOARD];
294 moxa_pci_info pciInfo;
295 int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002
296 int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 09-04-2002
297 int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 01-05-2004
298};
299
300struct mxser_struct {
301 int port;
302 int base; /* port base address */
303 int irq; /* port using irq no. */
304 int vector; /* port irq vector */
305 int vectormask; /* port vector mask */
306 int rx_high_water;
307 int rx_trigger; /* Rx fifo trigger level */
308 int rx_low_water;
309 int baud_base; /* max. speed */
310 int flags; /* defined in tty.h */
311 int type; /* UART type */
312 struct tty_struct *tty;
313 int read_status_mask;
314 int ignore_status_mask;
315 int xmit_fifo_size;
316 int custom_divisor;
317 int x_char; /* xon/xoff character */
318 int close_delay;
319 unsigned short closing_wait;
320 int IER; /* Interrupt Enable Register */
321 int MCR; /* Modem control register */
322 unsigned long event;
323 int count; /* # of fd on device */
324 int blocked_open; /* # of blocked opens */
325 long session; /* Session of opening process */
326 long pgrp; /* pgrp of opening process */
327 unsigned char *xmit_buf;
328 int xmit_head;
329 int xmit_tail;
330 int xmit_cnt;
331 struct work_struct tqueue;
332 struct termios normal_termios;
333 struct termios callout_termios;
334 wait_queue_head_t open_wait;
335 wait_queue_head_t close_wait;
336 wait_queue_head_t delta_msr_wait;
337 struct async_icount icount; /* kernel counters for the 4 input interrupts */
338 int timeout;
339 int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002
340 int MaxCanSetBaudRate; // add by Victor Yu. 09-04-2002
341 int opmode_ioaddr; // add by Victor Yu. 01-05-2004
342 unsigned char stop_rx;
343 unsigned char ldisc_stop_rx;
344 long realbaud;
345 struct mxser_mon mon_data;
346 unsigned char err_shadow;
347 spinlock_t slock;
348};
349
350
351struct mxser_mstatus {
352 tcflag_t cflag;
353 int cts;
354 int dsr;
355 int ri;
356 int dcd;
357};
358
359static struct mxser_mstatus GMStatus[MXSER_PORTS];
360
361static int mxserBoardCAP[MXSER_BOARDS] = {
362 0, 0, 0, 0
363 /* 0x180, 0x280, 0x200, 0x320 */
364};
365
366static struct tty_driver *mxvar_sdriver;
367static struct mxser_struct mxvar_table[MXSER_PORTS];
368static struct tty_struct *mxvar_tty[MXSER_PORTS + 1];
369static struct termios *mxvar_termios[MXSER_PORTS + 1];
370static struct termios *mxvar_termios_locked[MXSER_PORTS + 1];
371static struct mxser_log mxvar_log;
372static int mxvar_diagflag;
373static unsigned char mxser_msr[MXSER_PORTS + 1];
374static struct mxser_mon_ext mon_data_ext;
375static int mxser_set_baud_method[MXSER_PORTS + 1];
376static spinlock_t gm_lock;
377
378/*
379 * This is used to figure out the divisor speeds and the timeouts
380 */
381
382static struct mxser_hwconf mxsercfg[MXSER_BOARDS];
383
384/*
385 * static functions:
386 */
387
388static void mxser_getcfg(int board, struct mxser_hwconf *hwconf);
389static int mxser_init(void);
390
391//static void mxser_poll(unsigned long);
392static int mxser_get_ISA_conf(int, struct mxser_hwconf *);
393static int mxser_get_PCI_conf(int, int, int, struct mxser_hwconf *);
394static void mxser_do_softint(void *);
395static int mxser_open(struct tty_struct *, struct file *);
396static void mxser_close(struct tty_struct *, struct file *);
397static int mxser_write(struct tty_struct *, const unsigned char *, int);
398static int mxser_write_room(struct tty_struct *);
399static void mxser_flush_buffer(struct tty_struct *);
400static int mxser_chars_in_buffer(struct tty_struct *);
401static void mxser_flush_chars(struct tty_struct *);
402static void mxser_put_char(struct tty_struct *, unsigned char);
403static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong);
404static int mxser_ioctl_special(unsigned int, void __user *);
405static void mxser_throttle(struct tty_struct *);
406static void mxser_unthrottle(struct tty_struct *);
407static void mxser_set_termios(struct tty_struct *, struct termios *);
408static void mxser_stop(struct tty_struct *);
409static void mxser_start(struct tty_struct *);
410static void mxser_hangup(struct tty_struct *);
411static void mxser_rs_break(struct tty_struct *, int);
412static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *);
413static void mxser_receive_chars(struct mxser_struct *, int *);
414static void mxser_transmit_chars(struct mxser_struct *);
415static void mxser_check_modem_status(struct mxser_struct *, int);
416static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
417static int mxser_startup(struct mxser_struct *);
418static void mxser_shutdown(struct mxser_struct *);
419static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios);
420static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *);
421static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *);
422static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *);
423static void mxser_send_break(struct mxser_struct *, int);
424static int mxser_tiocmget(struct tty_struct *, struct file *);
425static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int);
426static int mxser_set_baud(struct mxser_struct *info, long newspd);
427static void mxser_wait_until_sent(struct tty_struct *tty, int timeout);
428
429static void mxser_startrx(struct tty_struct *tty);
430static void mxser_stoprx(struct tty_struct *tty);
431
432
433static int CheckIsMoxaMust(int io)
434{
435 u8 oldmcr, hwid;
436 int i;
437
438 outb(0, io + UART_LCR);
439 DISABLE_MOXA_MUST_ENCHANCE_MODE(io);
440 oldmcr = inb(io + UART_MCR);
441 outb(0, io + UART_MCR);
442 SET_MOXA_MUST_XON1_VALUE(io, 0x11);
443 if ((hwid = inb(io + UART_MCR)) != 0) {
444 outb(oldmcr, io + UART_MCR);
445 return (MOXA_OTHER_UART);
446 }
447
448 GET_MOXA_MUST_HARDWARE_ID(io, &hwid);
449 for (i = 0; i < UART_TYPE_NUM; i++) {
450 if (hwid == Gmoxa_uart_id[i])
451 return (int) hwid;
452 }
453 return MOXA_OTHER_UART;
454}
455
456// above is modified by Victor Yu. 08-15-2002
457
458static struct tty_operations mxser_ops = {
459 .open = mxser_open,
460 .close = mxser_close,
461 .write = mxser_write,
462 .put_char = mxser_put_char,
463 .flush_chars = mxser_flush_chars,
464 .write_room = mxser_write_room,
465 .chars_in_buffer = mxser_chars_in_buffer,
466 .flush_buffer = mxser_flush_buffer,
467 .ioctl = mxser_ioctl,
468 .throttle = mxser_throttle,
469 .unthrottle = mxser_unthrottle,
470 .set_termios = mxser_set_termios,
471 .stop = mxser_stop,
472 .start = mxser_start,
473 .hangup = mxser_hangup,
474 .tiocmget = mxser_tiocmget,
475 .tiocmset = mxser_tiocmset,
476};
477
478/*
479 * The MOXA Smartio/Industio serial driver boot-time initialization code!
480 */
481
482static int __init mxser_module_init(void)
483{
484 int ret;
485
486 if (verbose)
487 printk(KERN_DEBUG "Loading module mxser ...\n");
488 ret = mxser_init();
489 if (verbose)
490 printk(KERN_DEBUG "Done.\n");
491 return ret;
492}
493
494static void __exit mxser_module_exit(void)
495{
496 int i, err = 0;
497
498 if (verbose)
499 printk(KERN_DEBUG "Unloading module mxser ...\n");
500
501 if ((err |= tty_unregister_driver(mxvar_sdriver)))
502 printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n");
503
504 for (i = 0; i < MXSER_BOARDS; i++) {
505 struct pci_dev *pdev;
506
507 if (mxsercfg[i].board_type == -1)
508 continue;
509 else {
510 pdev = mxsercfg[i].pciInfo.pdev;
511 free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
512 if (pdev != NULL) { //PCI
513 release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2));
514 release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
515 } else {
516 release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports);
517 release_region(mxsercfg[i].vector, 1);
518 }
519 }
520 }
521 if (verbose)
522 printk(KERN_DEBUG "Done.\n");
523
524}
525
526static void process_txrx_fifo(struct mxser_struct *info)
527{
528 int i;
529
530 if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
531 info->rx_trigger = 1;
532 info->rx_high_water = 1;
533 info->rx_low_water = 1;
534 info->xmit_fifo_size = 1;
535 } else {
536 for (i = 0; i < UART_INFO_NUM; i++) {
537 if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) {
538 info->rx_trigger = Gpci_uart_info[i].rx_trigger;
539 info->rx_low_water = Gpci_uart_info[i].rx_low_water;
540 info->rx_high_water = Gpci_uart_info[i].rx_high_water;
541 info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
542 break;
543 }
544 }
545 }
546}
547
548static int mxser_initbrd(int board, struct mxser_hwconf *hwconf)
549{
550 struct mxser_struct *info;
551 int retval;
552 int i, n;
553
554 n = board * MXSER_PORTS_PER_BOARD;
555 info = &mxvar_table[n];
556 /*if (verbose) */ {
557 printk(KERN_DEBUG " ttyM%d - ttyM%d ", n, n + hwconf->ports - 1);
558 printk(" max. baud rate = %d bps.\n", hwconf->MaxCanSetBaudRate[0]);
559 }
560
561 for (i = 0; i < hwconf->ports; i++, n++, info++) {
562 info->port = n;
563 info->base = hwconf->ioaddr[i];
564 info->irq = hwconf->irq;
565 info->vector = hwconf->vector;
566 info->vectormask = hwconf->vector_mask;
567 info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; // add by Victor Yu. 01-05-2004
568 info->stop_rx = 0;
569 info->ldisc_stop_rx = 0;
570
571 info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag;
572 //Enhance mode enabled here
573 if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
574 ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base);
575 }
576
577 info->flags = ASYNC_SHARE_IRQ;
578 info->type = hwconf->uart_type;
579 info->baud_base = hwconf->baud_base[i];
580
581 info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i];
582
583 process_txrx_fifo(info);
584
585
586 info->custom_divisor = hwconf->baud_base[i] * 16;
587 info->close_delay = 5 * HZ / 10;
588 info->closing_wait = 30 * HZ;
589 INIT_WORK(&info->tqueue, mxser_do_softint, info);
590 info->normal_termios = mxvar_sdriver->init_termios;
591 init_waitqueue_head(&info->open_wait);
592 init_waitqueue_head(&info->close_wait);
593 init_waitqueue_head(&info->delta_msr_wait);
594 memset(&info->mon_data, 0, sizeof(struct mxser_mon));
595 info->err_shadow = 0;
596 spin_lock_init(&info->slock);
597 }
598 /*
599 * Allocate the IRQ if necessary
600 */
601
602
603 /* before set INT ISR, disable all int */
604 for (i = 0; i < hwconf->ports; i++) {
605 outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0, hwconf->ioaddr[i] + UART_IER);
606 }
607
608 n = board * MXSER_PORTS_PER_BOARD;
609 info = &mxvar_table[n];
610
611 retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), "mxser", info);
612 if (retval) {
613 printk(KERN_ERR "Board %d: %s", board, mxser_brdname[hwconf->board_type - 1]);
614 printk(" Request irq fail,IRQ (%d) may be conflit with another device.\n", info->irq);
615 return retval;
616 }
617 return 0;
618}
619
620
621static void mxser_getcfg(int board, struct mxser_hwconf *hwconf)
622{
623 mxsercfg[board] = *hwconf;
624}
625
626#ifdef CONFIG_PCI
627static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf)
628{
629 int i, j;
630// unsigned int val;
631 unsigned int ioaddress;
632 struct pci_dev *pdev = hwconf->pciInfo.pdev;
633
634 //io address
635 hwconf->board_type = board_type;
636 hwconf->ports = mxser_numports[board_type - 1];
637 ioaddress = pci_resource_start(pdev, 2);
638 request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2), "mxser(IO)");
639
640 for (i = 0; i < hwconf->ports; i++) {
641 hwconf->ioaddr[i] = ioaddress + 8 * i;
642 }
643
644 //vector
645 ioaddress = pci_resource_start(pdev, 3);
646 request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3), "mxser(vector)");
647 hwconf->vector = ioaddress;
648
649 //irq
650 hwconf->irq = hwconf->pciInfo.pdev->irq;
651
652 hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]);
653 hwconf->uart_type = PORT_16550A;
654 hwconf->vector_mask = 0;
655
656
657 for (i = 0; i < hwconf->ports; i++) {
658 for (j = 0; j < UART_INFO_NUM; j++) {
659 if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) {
660 hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud;
661
662 //exception....CP-102
663 if (board_type == MXSER_BOARD_CP102)
664 hwconf->MaxCanSetBaudRate[i] = 921600;
665 break;
666 }
667 }
668 }
669
670 if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) {
671 for (i = 0; i < hwconf->ports; i++) {
672 if (i < 4)
673 hwconf->opmode_ioaddr[i] = ioaddress + 4;
674 else
675 hwconf->opmode_ioaddr[i] = ioaddress + 0x0c;
676 }
677 outb(0, ioaddress + 4); // default set to RS232 mode
678 outb(0, ioaddress + 0x0c); //default set to RS232 mode
679 }
680
681 for (i = 0; i < hwconf->ports; i++) {
682 hwconf->vector_mask |= (1 << i);
683 hwconf->baud_base[i] = 921600;
684 }
685 return (0);
686}
687#endif
688
689static int mxser_init(void)
690{
691 int i, m, retval, b, n;
692 int ret1;
693 struct pci_dev *pdev = NULL;
694 int index;
695 unsigned char busnum, devnum;
696 struct mxser_hwconf hwconf;
697
698 mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
699 if (!mxvar_sdriver)
700 return -ENOMEM;
701 spin_lock_init(&gm_lock);
702
703 for (i = 0; i < MXSER_BOARDS; i++) {
704 mxsercfg[i].board_type = -1;
705 }
706
707 printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", MXSER_VERSION);
708
709 /* Initialize the tty_driver structure */
710 memset(mxvar_sdriver, 0, sizeof(struct tty_driver));
711 mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
712 mxvar_sdriver->name = "ttyM";
713 mxvar_sdriver->major = ttymajor;
714 mxvar_sdriver->minor_start = 0;
715 mxvar_sdriver->num = MXSER_PORTS + 1;
716 mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
717 mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
718 mxvar_sdriver->init_termios = tty_std_termios;
719 mxvar_sdriver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
720 mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW;
721 tty_set_operations(mxvar_sdriver, &mxser_ops);
722 mxvar_sdriver->ttys = mxvar_tty;
723 mxvar_sdriver->termios = mxvar_termios;
724 mxvar_sdriver->termios_locked = mxvar_termios_locked;
725
726 mxvar_sdriver->open = mxser_open;
727 mxvar_sdriver->close = mxser_close;
728 mxvar_sdriver->write = mxser_write;
729 mxvar_sdriver->put_char = mxser_put_char;
730 mxvar_sdriver->flush_chars = mxser_flush_chars;
731 mxvar_sdriver->write_room = mxser_write_room;
732 mxvar_sdriver->chars_in_buffer = mxser_chars_in_buffer;
733 mxvar_sdriver->flush_buffer = mxser_flush_buffer;
734 mxvar_sdriver->ioctl = mxser_ioctl;
735 mxvar_sdriver->throttle = mxser_throttle;
736 mxvar_sdriver->unthrottle = mxser_unthrottle;
737 mxvar_sdriver->set_termios = mxser_set_termios;
738 mxvar_sdriver->stop = mxser_stop;
739 mxvar_sdriver->start = mxser_start;
740 mxvar_sdriver->hangup = mxser_hangup;
741 mxvar_sdriver->break_ctl = mxser_rs_break;
742 mxvar_sdriver->wait_until_sent = mxser_wait_until_sent;
743
744 mxvar_diagflag = 0;
745 memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct));
746 memset(&mxvar_log, 0, sizeof(struct mxser_log));
747
748 memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1));
749 memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext));
750 memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1));
751 memset(&hwconf, 0, sizeof(struct mxser_hwconf));
752
753 m = 0;
754 /* Start finding ISA boards here */
755 for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
756 int cap;
757 if (!(cap = mxserBoardCAP[b]))
758 continue;
759
760 retval = mxser_get_ISA_conf(cap, &hwconf);
761
762 if (retval != 0)
763 printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
764
765 if (retval <= 0) {
766 if (retval == MXSER_ERR_IRQ)
767 printk(KERN_ERR "Invalid interrupt number,board not configured\n");
768 else if (retval == MXSER_ERR_IRQ_CONFLIT)
769 printk(KERN_ERR "Invalid interrupt number,board not configured\n");
770 else if (retval == MXSER_ERR_VECTOR)
771 printk(KERN_ERR "Invalid interrupt vector,board not configured\n");
772 else if (retval == MXSER_ERR_IOADDR)
773 printk(KERN_ERR "Invalid I/O address,board not configured\n");
774
775 continue;
776 }
777
778 hwconf.pciInfo.busNum = 0;
779 hwconf.pciInfo.devNum = 0;
780 hwconf.pciInfo.pdev = NULL;
781
782 mxser_getcfg(m, &hwconf);
783 //init mxsercfg first, or mxsercfg data is not correct on ISR.
784 //mxser_initbrd will hook ISR.
785 if (mxser_initbrd(m, &hwconf) < 0)
786 continue;
787
788
789 m++;
790 }
791
792 /* Start finding ISA boards from module arg */
793 for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
794 int cap;
795 if (!(cap = ioaddr[b]))
796 continue;
797
798 retval = mxser_get_ISA_conf(cap, &hwconf);
799
800 if (retval != 0)
801 printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
802
803 if (retval <= 0) {
804 if (retval == MXSER_ERR_IRQ)
805 printk(KERN_ERR "Invalid interrupt number,board not configured\n");
806 else if (retval == MXSER_ERR_IRQ_CONFLIT)
807 printk(KERN_ERR "Invalid interrupt number,board not configured\n");
808 else if (retval == MXSER_ERR_VECTOR)
809 printk(KERN_ERR "Invalid interrupt vector,board not configured\n");
810 else if (retval == MXSER_ERR_IOADDR)
811 printk(KERN_ERR "Invalid I/O address,board not configured\n");
812
813 continue;
814 }
815
816 hwconf.pciInfo.busNum = 0;
817 hwconf.pciInfo.devNum = 0;
818 hwconf.pciInfo.pdev = NULL;
819
820 mxser_getcfg(m, &hwconf);
821 //init mxsercfg first, or mxsercfg data is not correct on ISR.
822 //mxser_initbrd will hook ISR.
823 if (mxser_initbrd(m, &hwconf) < 0)
824 continue;
825
826 m++;
827 }
828
829 /* start finding PCI board here */
830#ifdef CONFIG_PCI
831 n = (sizeof(mxser_pcibrds) / sizeof(mxser_pcibrds[0])) - 1;
832 index = 0;
833 b = 0;
834 while (b < n) {
835 pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev);
836 if (pdev == NULL) {
837 b++;
838 continue;
839 }
840 hwconf.pciInfo.busNum = busnum = pdev->bus->number;
841 hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3;
842 hwconf.pciInfo.pdev = pdev;
843 printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n", mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1], busnum, devnum >> 3);
844 index++;
845 if (m >= MXSER_BOARDS) {
846 printk(KERN_ERR "Too many Smartio/Industio family boards find (maximum %d),board not configured\n", MXSER_BOARDS);
847 } else {
848 if (pci_enable_device(pdev)) {
849 printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
850 continue;
851 }
852 retval = mxser_get_PCI_conf(busnum, devnum, (int) mxser_pcibrds[b].driver_data, &hwconf);
853 if (retval < 0) {
854 if (retval == MXSER_ERR_IRQ)
855 printk(KERN_ERR "Invalid interrupt number,board not configured\n");
856 else if (retval == MXSER_ERR_IRQ_CONFLIT)
857 printk(KERN_ERR "Invalid interrupt number,board not configured\n");
858 else if (retval == MXSER_ERR_VECTOR)
859 printk(KERN_ERR "Invalid interrupt vector,board not configured\n");
860 else if (retval == MXSER_ERR_IOADDR)
861 printk(KERN_ERR "Invalid I/O address,board not configured\n");
862 continue;
863 }
864 mxser_getcfg(m, &hwconf);
865 //init mxsercfg first, or mxsercfg data is not correct on ISR.
866 //mxser_initbrd will hook ISR.
867 if (mxser_initbrd(m, &hwconf) < 0)
868 continue;
869 m++;
870 }
871 }
872#endif
873
874 ret1 = 0;
875 if (!(ret1 = tty_register_driver(mxvar_sdriver))) {
876 return 0;
877 } else
878 printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family driver !\n");
879
880
881 if (ret1) {
882 for (i = 0; i < MXSER_BOARDS; i++) {
883 if (mxsercfg[i].board_type == -1)
884 continue;
885 else {
886 free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
887 //todo: release io, vector
888 }
889 }
890 return -1;
891 }
892
893 return (0);
894}
895
896static void mxser_do_softint(void *private_)
897{
898 struct mxser_struct *info = (struct mxser_struct *) private_;
899 struct tty_struct *tty;
900
901 tty = info->tty;
902
903 if (tty) {
904 if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event))
905 tty_wakeup(tty);
906 if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event))
907 tty_hangup(tty);
908 }
909}
910
911static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info)
912{
913 unsigned char status = 0;
914
915 status = inb(baseaddr + UART_MSR);
916
917 mxser_msr[port] &= 0x0F;
918 mxser_msr[port] |= status;
919 status = mxser_msr[port];
920 if (mode)
921 mxser_msr[port] = 0;
922
923 return status;
924}
925
926/*
927 * This routine is called whenever a serial port is opened. It
928 * enables interrupts for a serial port, linking in its async structure into
929 * the IRQ chain. It also performs the serial-specific
930 * initialization for the tty structure.
931 */
932static int mxser_open(struct tty_struct *tty, struct file *filp)
933{
934 struct mxser_struct *info;
935 int retval, line;
936
937 line = tty->index;
938 if (line == MXSER_PORTS)
939 return 0;
940 if (line < 0 || line > MXSER_PORTS)
941 return -ENODEV;
942 info = mxvar_table + line;
943 if (!info->base)
944 return (-ENODEV);
945
946 tty->driver_data = info;
947 info->tty = tty;
948 /*
949 * Start up serial port
950 */
951 retval = mxser_startup(info);
952 if (retval)
953 return (retval);
954
955 retval = mxser_block_til_ready(tty, filp, info);
956 if (retval)
957 return (retval);
958
959 info->count++;
960
961 if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
962 if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
963 *tty->termios = info->normal_termios;
964 else
965 *tty->termios = info->callout_termios;
966 mxser_change_speed(info, NULL);
967 }
968
969 info->session = current->signal->session;
970 info->pgrp = process_group(current);
971 clear_bit(TTY_DONT_FLIP, &tty->flags);
972
973 //status = mxser_get_msr(info->base, 0, info->port);
974 //mxser_check_modem_status(info, status);
975
976/* unmark here for very high baud rate (ex. 921600 bps) used
977*/
978 tty->low_latency = 1;
979 return 0;
980}
981
982/*
983 * This routine is called when the serial port gets closed. First, we
984 * wait for the last remaining data to be sent. Then, we unlink its
985 * async structure from the interrupt chain if necessary, and we free
986 * that IRQ if nothing is left in the chain.
987 */
988static void mxser_close(struct tty_struct *tty, struct file *filp)
989{
990 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
991
992 unsigned long timeout;
993 unsigned long flags;
994 struct tty_ldisc *ld;
995
996 if (tty->index == MXSER_PORTS)
997 return;
998 if (!info)
999 BUG();
1000
1001 spin_lock_irqsave(&info->slock, flags);
1002
1003 if (tty_hung_up_p(filp)) {
1004 spin_unlock_irqrestore(&info->slock, flags);
1005 return;
1006 }
1007 if ((tty->count == 1) && (info->count != 1)) {
1008 /*
1009 * Uh, oh. tty->count is 1, which means that the tty
1010 * structure will be freed. Info->count should always
1011 * be one in these conditions. If it's greater than
1012 * one, we've got real problems, since it means the
1013 * serial port won't be shutdown.
1014 */
1015 printk(KERN_ERR "mxser_close: bad serial port count; tty->count is 1, " "info->count is %d\n", info->count);
1016 info->count = 1;
1017 }
1018 if (--info->count < 0) {
1019 printk(KERN_ERR "mxser_close: bad serial port count for ttys%d: %d\n", info->port, info->count);
1020 info->count = 0;
1021 }
1022 if (info->count) {
1023 spin_unlock_irqrestore(&info->slock, flags);
1024 return;
1025 }
1026 info->flags |= ASYNC_CLOSING;
1027 spin_unlock_irqrestore(&info->slock, flags);
1028 /*
1029 * Save the termios structure, since this port may have
1030 * separate termios for callout and dialin.
1031 */
1032 if (info->flags & ASYNC_NORMAL_ACTIVE)
1033 info->normal_termios = *tty->termios;
1034 /*
1035 * Now we wait for the transmit buffer to clear; and we notify
1036 * the line discipline to only process XON/XOFF characters.
1037 */
1038 tty->closing = 1;
1039 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1040 tty_wait_until_sent(tty, info->closing_wait);
1041 /*
1042 * At this point we stop accepting input. To do this, we
1043 * disable the receive line status interrupts, and tell the
1044 * interrupt driver to stop checking the data ready bit in the
1045 * line status register.
1046 */
1047 info->IER &= ~UART_IER_RLSI;
1048 if (info->IsMoxaMustChipFlag)
1049 info->IER &= ~MOXA_MUST_RECV_ISR;
1050/* by William
1051 info->read_status_mask &= ~UART_LSR_DR;
1052*/
1053 if (info->flags & ASYNC_INITIALIZED) {
1054 outb(info->IER, info->base + UART_IER);
1055 /*
1056 * Before we drop DTR, make sure the UART transmitter
1057 * has completely drained; this is especially
1058 * important if there is a transmit FIFO!
1059 */
1060 timeout = jiffies + HZ;
1061 while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) {
1062 set_current_state(TASK_INTERRUPTIBLE);
1063 schedule_timeout(5);
1064 if (time_after(jiffies, timeout))
1065 break;
1066 }
1067 }
1068 mxser_shutdown(info);
1069
1070 if (tty->driver->flush_buffer)
1071 tty->driver->flush_buffer(tty);
1072
1073 ld = tty_ldisc_ref(tty);
1074 if (ld) {
1075 if(ld->flush_buffer)
1076 ld->flush_buffer(tty);
1077 tty_ldisc_deref(ld);
1078 }
1079
1080 tty->closing = 0;
1081 info->event = 0;
1082 info->tty = NULL;
1083 if (info->blocked_open) {
1084 if (info->close_delay) {
1085 set_current_state(TASK_INTERRUPTIBLE);
1086 schedule_timeout(info->close_delay);
1087 }
1088 wake_up_interruptible(&info->open_wait);
1089 }
1090
1091 info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
1092 wake_up_interruptible(&info->close_wait);
1093
1094}
1095
1096static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
1097{
1098 int c, total = 0;
1099 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1100 unsigned long flags;
1101
1102 if (!tty || !info->xmit_buf)
1103 return (0);
1104
1105 while (1) {
1106 c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head));
1107 if (c <= 0)
1108 break;
1109
1110 memcpy(info->xmit_buf + info->xmit_head, buf, c);
1111 spin_lock_irqsave(&info->slock, flags);
1112 info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
1113 info->xmit_cnt += c;
1114 spin_unlock_irqrestore(&info->slock, flags);
1115
1116 buf += c;
1117 count -= c;
1118 total += c;
1119
1120 }
1121
1122 if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) {
1123 if (!tty->hw_stopped || (info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) {
1124 spin_lock_irqsave(&info->slock, flags);
1125 info->IER |= UART_IER_THRI;
1126 outb(info->IER, info->base + UART_IER);
1127 spin_unlock_irqrestore(&info->slock, flags);
1128 }
1129 }
1130 return total;
1131}
1132
1133static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
1134{
1135 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1136 unsigned long flags;
1137
1138 if (!tty || !info->xmit_buf)
1139 return;
1140
1141 if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1142 return;
1143
1144 spin_lock_irqsave(&info->slock, flags);
1145 info->xmit_buf[info->xmit_head++] = ch;
1146 info->xmit_head &= SERIAL_XMIT_SIZE - 1;
1147 info->xmit_cnt++;
1148 spin_unlock_irqrestore(&info->slock, flags);
1149 if (!tty->stopped && !(info->IER & UART_IER_THRI)) {
1150 if (!tty->hw_stopped || (info->type == PORT_16550A) || info->IsMoxaMustChipFlag) {
1151 spin_lock_irqsave(&info->slock, flags);
1152 info->IER |= UART_IER_THRI;
1153 outb(info->IER, info->base + UART_IER);
1154 spin_unlock_irqrestore(&info->slock, flags);
1155 }
1156 }
1157}
1158
1159
1160static void mxser_flush_chars(struct tty_struct *tty)
1161{
1162 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1163 unsigned long flags;
1164
1165 if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf || (tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)))
1166 return;
1167
1168 spin_lock_irqsave(&info->slock, flags);
1169
1170 info->IER |= UART_IER_THRI;
1171 outb(info->IER, info->base + UART_IER);
1172
1173 spin_unlock_irqrestore(&info->slock, flags);
1174}
1175
1176static int mxser_write_room(struct tty_struct *tty)
1177{
1178 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1179 int ret;
1180
1181 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
1182 if (ret < 0)
1183 ret = 0;
1184 return (ret);
1185}
1186
1187static int mxser_chars_in_buffer(struct tty_struct *tty)
1188{
1189 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1190 return info->xmit_cnt;
1191}
1192
1193static void mxser_flush_buffer(struct tty_struct *tty)
1194{
1195 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1196 char fcr;
1197 unsigned long flags;
1198
1199
1200 spin_lock_irqsave(&info->slock, flags);
1201 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1202
1203 /* below added by shinhay */
1204 fcr = inb(info->base + UART_FCR);
1205 outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
1206 outb(fcr, info->base + UART_FCR);
1207
1208 spin_unlock_irqrestore(&info->slock, flags);
1209 /* above added by shinhay */
1210
1211 wake_up_interruptible(&tty->write_wait);
1212 if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup)
1213 (tty->ldisc.write_wakeup) (tty);
1214}
1215
1216static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1217{
1218 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1219 int retval;
1220 struct async_icount cprev, cnow; /* kernel counter temps */
1221 struct serial_icounter_struct __user *p_cuser;
1222 unsigned long templ;
1223 unsigned long flags;
1224 void __user *argp = (void __user *)arg;
1225
1226 if (tty->index == MXSER_PORTS)
1227 return (mxser_ioctl_special(cmd, argp));
1228
1229 // following add by Victor Yu. 01-05-2004
1230 if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
1231 int opmode, p;
1232 static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
1233 int shiftbit;
1234 unsigned char val, mask;
1235
1236 p = info->port % 4;
1237 if (cmd == MOXA_SET_OP_MODE) {
1238 if (get_user(opmode, (int __user *) argp))
1239 return -EFAULT;
1240 if (opmode != RS232_MODE && opmode != RS485_2WIRE_MODE && opmode != RS422_MODE && opmode != RS485_4WIRE_MODE)
1241 return -EFAULT;
1242 mask = ModeMask[p];
1243 shiftbit = p * 2;
1244 val = inb(info->opmode_ioaddr);
1245 val &= mask;
1246 val |= (opmode << shiftbit);
1247 outb(val, info->opmode_ioaddr);
1248 } else {
1249 shiftbit = p * 2;
1250 opmode = inb(info->opmode_ioaddr) >> shiftbit;
1251 opmode &= OP_MODE_MASK;
1252 if (copy_to_user(argp, &opmode, sizeof(int)))
1253 return -EFAULT;
1254 }
1255 return 0;
1256 }
1257 // above add by Victor Yu. 01-05-2004
1258
1259 if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1260 if (tty->flags & (1 << TTY_IO_ERROR))
1261 return (-EIO);
1262 }
1263 switch (cmd) {
1264 case TCSBRK: /* SVID version: non-zero arg --> no break */
1265 retval = tty_check_change(tty);
1266 if (retval)
1267 return (retval);
1268 tty_wait_until_sent(tty, 0);
1269 if (!arg)
1270 mxser_send_break(info, HZ / 4); /* 1/4 second */
1271 return (0);
1272 case TCSBRKP: /* support for POSIX tcsendbreak() */
1273 retval = tty_check_change(tty);
1274 if (retval)
1275 return (retval);
1276 tty_wait_until_sent(tty, 0);
1277 mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
1278 return (0);
1279 case TIOCGSOFTCAR:
1280 return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp);
1281 case TIOCSSOFTCAR:
1282 if (get_user(templ, (unsigned long __user *) argp))
1283 return -EFAULT;
1284 arg = templ;
1285 tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
1286 return (0);
1287 case TIOCGSERIAL:
1288 return mxser_get_serial_info(info, argp);
1289 case TIOCSSERIAL:
1290 return mxser_set_serial_info(info, argp);
1291 case TIOCSERGETLSR: /* Get line status register */
1292 return mxser_get_lsr_info(info, argp);
1293 /*
1294 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1295 * - mask passed in arg for lines of interest
1296 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1297 * Caller should use TIOCGICOUNT to see which one it was
1298 */
1299 case TIOCMIWAIT:{
1300 DECLARE_WAITQUEUE(wait, current);
1301 int ret;
1302 spin_lock_irqsave(&info->slock, flags);
1303 cprev = info->icount; /* note the counters on entry */
1304 spin_unlock_irqrestore(&info->slock, flags);
1305
1306 add_wait_queue(&info->delta_msr_wait, &wait);
1307 while (1) {
1308 spin_lock_irqsave(&info->slock, flags);
1309 cnow = info->icount; /* atomic copy */
1310 spin_unlock_irqrestore(&info->slock, flags);
1311
1312 set_current_state(TASK_INTERRUPTIBLE);
1313 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
1314 ret = 0;
1315 break;
1316 }
1317 /* see if a signal did it */
1318 if (signal_pending(current)) {
1319 ret = -ERESTARTSYS;
1320 break;
1321 }
1322 cprev = cnow;
1323 }
1324 current->state = TASK_RUNNING;
1325 remove_wait_queue(&info->delta_msr_wait, &wait);
1326 break;
1327 }
1328 /* NOTREACHED */
1329 /*
1330 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1331 * Return: write counters to the user passed counter struct
1332 * NB: both 1->0 and 0->1 transitions are counted except for
1333 * RI where only 0->1 is counted.
1334 */
1335 case TIOCGICOUNT:
1336 spin_lock_irqsave(&info->slock, flags);
1337 cnow = info->icount;
1338 spin_unlock_irqrestore(&info->slock, flags);
1339 p_cuser = argp;
1340 /* modified by casper 1/11/2000 */
1341 if (put_user(cnow.frame, &p_cuser->frame))
1342 return -EFAULT;
1343 if (put_user(cnow.brk, &p_cuser->brk))
1344 return -EFAULT;
1345 if (put_user(cnow.overrun, &p_cuser->overrun))
1346 return -EFAULT;
1347 if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1348 return -EFAULT;
1349 if (put_user(cnow.parity, &p_cuser->parity))
1350 return -EFAULT;
1351 if (put_user(cnow.rx, &p_cuser->rx))
1352 return -EFAULT;
1353 if (put_user(cnow.tx, &p_cuser->tx))
1354 return -EFAULT;
1355 put_user(cnow.cts, &p_cuser->cts);
1356 put_user(cnow.dsr, &p_cuser->dsr);
1357 put_user(cnow.rng, &p_cuser->rng);
1358 put_user(cnow.dcd, &p_cuser->dcd);
1359
1360/* */
1361 return 0;
1362 case MOXA_HighSpeedOn:
1363 return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *) argp);
1364
1365 case MOXA_SDS_RSTICOUNTER:{
1366 info->mon_data.rxcnt = 0;
1367 info->mon_data.txcnt = 0;
1368 return 0;
1369 }
1370// (above) added by James.
1371 case MOXA_ASPP_SETBAUD:{
1372 long baud;
1373 if (get_user(baud, (long __user *) argp))
1374 return -EFAULT;
1375 mxser_set_baud(info, baud);
1376 return 0;
1377 }
1378 case MOXA_ASPP_GETBAUD:
1379 if (copy_to_user(argp, &info->realbaud, sizeof(long)))
1380 return -EFAULT;
1381
1382 return 0;
1383
1384 case MOXA_ASPP_OQUEUE:{
1385 int len, lsr;
1386
1387 len = mxser_chars_in_buffer(tty);
1388
1389 lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT;
1390
1391 len += (lsr ? 0 : 1);
1392
1393 if (copy_to_user(argp, &len, sizeof(int)))
1394 return -EFAULT;
1395
1396 return 0;
1397 }
1398 case MOXA_ASPP_MON:{
1399 int mcr, status;
1400// info->mon_data.ser_param = tty->termios->c_cflag;
1401
1402 status = mxser_get_msr(info->base, 1, info->port, info);
1403 mxser_check_modem_status(info, status);
1404
1405 mcr = inb(info->base + UART_MCR);
1406 if (mcr & MOXA_MUST_MCR_XON_FLAG)
1407 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
1408 else
1409 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
1410
1411 if (mcr & MOXA_MUST_MCR_TX_XON)
1412 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
1413 else
1414 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
1415
1416 if (info->tty->hw_stopped)
1417 info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
1418 else
1419 info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
1420
1421
1422 if (copy_to_user(argp, &info->mon_data, sizeof(struct mxser_mon)))
1423 return -EFAULT;
1424
1425 return 0;
1426
1427 }
1428
1429 case MOXA_ASPP_LSTATUS:{
1430 if (copy_to_user(argp, &info->err_shadow, sizeof(unsigned char)))
1431 return -EFAULT;
1432
1433 info->err_shadow = 0;
1434 return 0;
1435
1436 }
1437 case MOXA_SET_BAUD_METHOD:{
1438 int method;
1439 if (get_user(method, (int __user *) argp))
1440 return -EFAULT;
1441 mxser_set_baud_method[info->port] = method;
1442 if (copy_to_user(argp, &method, sizeof(int)))
1443 return -EFAULT;
1444
1445 return 0;
1446 }
1447 default:
1448 return -ENOIOCTLCMD;
1449 }
1450 return 0;
1451}
1452
1453#ifndef CMSPAR
1454#define CMSPAR 010000000000
1455#endif
1456
1457static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
1458{
1459 int i, result, status;
1460
1461 switch (cmd) {
1462 case MOXA_GET_CONF:
1463 if (copy_to_user(argp, mxsercfg, sizeof(struct mxser_hwconf) * 4))
1464 return -EFAULT;
1465 return 0;
1466 case MOXA_GET_MAJOR:
1467 if (copy_to_user(argp, &ttymajor, sizeof(int)))
1468 return -EFAULT;
1469 return 0;
1470
1471 case MOXA_GET_CUMAJOR:
1472 if (copy_to_user(argp, &calloutmajor, sizeof(int)))
1473 return -EFAULT;
1474 return 0;
1475
1476 case MOXA_CHKPORTENABLE:
1477 result = 0;
1478 for (i = 0; i < MXSER_PORTS; i++) {
1479 if (mxvar_table[i].base)
1480 result |= (1 << i);
1481 }
1482 return put_user(result, (unsigned long __user *) argp);
1483 case MOXA_GETDATACOUNT:
1484 if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
1485 return -EFAULT;
1486 return (0);
1487 case MOXA_GETMSTATUS:
1488 for (i = 0; i < MXSER_PORTS; i++) {
1489 GMStatus[i].ri = 0;
1490 if (!mxvar_table[i].base) {
1491 GMStatus[i].dcd = 0;
1492 GMStatus[i].dsr = 0;
1493 GMStatus[i].cts = 0;
1494 continue;
1495 }
1496
1497 if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios)
1498 GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag;
1499 else
1500 GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag;
1501
1502 status = inb(mxvar_table[i].base + UART_MSR);
1503 if (status & 0x80 /*UART_MSR_DCD */ )
1504 GMStatus[i].dcd = 1;
1505 else
1506 GMStatus[i].dcd = 0;
1507
1508 if (status & 0x20 /*UART_MSR_DSR */ )
1509 GMStatus[i].dsr = 1;
1510 else
1511 GMStatus[i].dsr = 0;
1512
1513
1514 if (status & 0x10 /*UART_MSR_CTS */ )
1515 GMStatus[i].cts = 1;
1516 else
1517 GMStatus[i].cts = 0;
1518 }
1519 if (copy_to_user(argp, GMStatus, sizeof(struct mxser_mstatus) * MXSER_PORTS))
1520 return -EFAULT;
1521 return 0;
1522 case MOXA_ASPP_MON_EXT:{
1523 int status;
1524 int opmode, p;
1525 int shiftbit;
1526 unsigned cflag, iflag;
1527
1528 for (i = 0; i < MXSER_PORTS; i++) {
1529
1530 if (!mxvar_table[i].base)
1531 continue;
1532
1533 status = mxser_get_msr(mxvar_table[i].base, 0, i, &(mxvar_table[i]));
1534// mxser_check_modem_status(&mxvar_table[i], status);
1535 if (status & UART_MSR_TERI)
1536 mxvar_table[i].icount.rng++;
1537 if (status & UART_MSR_DDSR)
1538 mxvar_table[i].icount.dsr++;
1539 if (status & UART_MSR_DDCD)
1540 mxvar_table[i].icount.dcd++;
1541 if (status & UART_MSR_DCTS)
1542 mxvar_table[i].icount.cts++;
1543
1544 mxvar_table[i].mon_data.modem_status = status;
1545 mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt;
1546 mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt;
1547 mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt;
1548 mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt;
1549 mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status;
1550 mon_data_ext.baudrate[i] = mxvar_table[i].realbaud;
1551
1552 if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) {
1553 cflag = mxvar_table[i].normal_termios.c_cflag;
1554 iflag = mxvar_table[i].normal_termios.c_iflag;
1555 } else {
1556 cflag = mxvar_table[i].tty->termios->c_cflag;
1557 iflag = mxvar_table[i].tty->termios->c_iflag;
1558 }
1559
1560 mon_data_ext.databits[i] = cflag & CSIZE;
1561
1562 mon_data_ext.stopbits[i] = cflag & CSTOPB;
1563
1564 mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR);
1565
1566 mon_data_ext.flowctrl[i] = 0x00;
1567
1568 if (cflag & CRTSCTS)
1569 mon_data_ext.flowctrl[i] |= 0x03;
1570
1571 if (iflag & (IXON | IXOFF))
1572 mon_data_ext.flowctrl[i] |= 0x0C;
1573
1574 if (mxvar_table[i].type == PORT_16550A)
1575 mon_data_ext.fifo[i] = 1;
1576 else
1577 mon_data_ext.fifo[i] = 0;
1578
1579 p = i % 4;
1580 shiftbit = p * 2;
1581 opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit;
1582 opmode &= OP_MODE_MASK;
1583
1584 mon_data_ext.iftype[i] = opmode;
1585
1586 }
1587 if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext)))
1588 return -EFAULT;
1589
1590 return 0;
1591
1592 }
1593 default:
1594 return -ENOIOCTLCMD;
1595 }
1596 return 0;
1597}
1598
1599
1600static void mxser_stoprx(struct tty_struct *tty)
1601{
1602 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1603 //unsigned long flags;
1604
1605
1606 info->ldisc_stop_rx = 1;
1607 if (I_IXOFF(tty)) {
1608
1609 //MX_LOCK(&info->slock);
1610 // following add by Victor Yu. 09-02-2002
1611 if (info->IsMoxaMustChipFlag) {
1612 info->IER &= ~MOXA_MUST_RECV_ISR;
1613 outb(info->IER, info->base + UART_IER);
1614 } else {
1615 // above add by Victor Yu. 09-02-2002
1616
1617 info->x_char = STOP_CHAR(tty);
1618 // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002
1619 outb(0, info->base + UART_IER);
1620 info->IER |= UART_IER_THRI;
1621 outb(info->IER, info->base + UART_IER); /* force Tx interrupt */
1622 } // add by Victor Yu. 09-02-2002
1623 //MX_UNLOCK(&info->slock);
1624 }
1625
1626 if (info->tty->termios->c_cflag & CRTSCTS) {
1627 //MX_LOCK(&info->slock);
1628 info->MCR &= ~UART_MCR_RTS;
1629 outb(info->MCR, info->base + UART_MCR);
1630 //MX_UNLOCK(&info->slock);
1631 }
1632}
1633
1634static void mxser_startrx(struct tty_struct *tty)
1635{
1636 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1637 //unsigned long flags;
1638
1639 info->ldisc_stop_rx = 0;
1640 if (I_IXOFF(tty)) {
1641 if (info->x_char)
1642 info->x_char = 0;
1643 else {
1644 //MX_LOCK(&info->slock);
1645
1646 // following add by Victor Yu. 09-02-2002
1647 if (info->IsMoxaMustChipFlag) {
1648 info->IER |= MOXA_MUST_RECV_ISR;
1649 outb(info->IER, info->base + UART_IER);
1650 } else {
1651 // above add by Victor Yu. 09-02-2002
1652
1653 info->x_char = START_CHAR(tty);
1654 // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002
1655 outb(0, info->base + UART_IER); // add by Victor Yu. 09-02-2002
1656 info->IER |= UART_IER_THRI; /* force Tx interrupt */
1657 outb(info->IER, info->base + UART_IER);
1658 } // add by Victor Yu. 09-02-2002
1659 //MX_UNLOCK(&info->slock);
1660 }
1661 }
1662
1663 if (info->tty->termios->c_cflag & CRTSCTS) {
1664 //MX_LOCK(&info->slock);
1665 info->MCR |= UART_MCR_RTS;
1666 outb(info->MCR, info->base + UART_MCR);
1667 //MX_UNLOCK(&info->slock);
1668 }
1669}
1670
1671/*
1672 * This routine is called by the upper-layer tty layer to signal that
1673 * incoming characters should be throttled.
1674 */
1675static void mxser_throttle(struct tty_struct *tty)
1676{
1677 //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data;
1678 //unsigned long flags;
1679 //MX_LOCK(&info->slock);
1680 mxser_stoprx(tty);
1681 //MX_UNLOCK(&info->slock);
1682}
1683
1684static void mxser_unthrottle(struct tty_struct *tty)
1685{
1686 //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data;
1687 //unsigned long flags;
1688 //MX_LOCK(&info->slock);
1689 mxser_startrx(tty);
1690 //MX_UNLOCK(&info->slock);
1691}
1692
1693static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios)
1694{
1695 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1696 unsigned long flags;
1697
1698 if ((tty->termios->c_cflag != old_termios->c_cflag) || (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
1699
1700 mxser_change_speed(info, old_termios);
1701
1702 if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
1703 tty->hw_stopped = 0;
1704 mxser_start(tty);
1705 }
1706 }
1707
1708/* Handle sw stopped */
1709 if ((old_termios->c_iflag & IXON) && !(tty->termios->c_iflag & IXON)) {
1710 tty->stopped = 0;
1711
1712 // following add by Victor Yu. 09-02-2002
1713 if (info->IsMoxaMustChipFlag) {
1714 spin_lock_irqsave(&info->slock, flags);
1715 DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
1716 spin_unlock_irqrestore(&info->slock, flags);
1717 }
1718 // above add by Victor Yu. 09-02-2002
1719
1720 mxser_start(tty);
1721 }
1722}
1723
1724/*
1725 * mxser_stop() and mxser_start()
1726 *
1727 * This routines are called before setting or resetting tty->stopped.
1728 * They enable or disable transmitter interrupts, as necessary.
1729 */
1730static void mxser_stop(struct tty_struct *tty)
1731{
1732 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1733 unsigned long flags;
1734
1735 spin_lock_irqsave(&info->slock, flags);
1736 if (info->IER & UART_IER_THRI) {
1737 info->IER &= ~UART_IER_THRI;
1738 outb(info->IER, info->base + UART_IER);
1739 }
1740 spin_unlock_irqrestore(&info->slock, flags);
1741}
1742
1743static void mxser_start(struct tty_struct *tty)
1744{
1745 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1746 unsigned long flags;
1747
1748 spin_lock_irqsave(&info->slock, flags);
1749 if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) {
1750 info->IER |= UART_IER_THRI;
1751 outb(info->IER, info->base + UART_IER);
1752 }
1753 spin_unlock_irqrestore(&info->slock, flags);
1754}
1755
1756/*
1757 * mxser_wait_until_sent() --- wait until the transmitter is empty
1758 */
1759static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
1760{
1761 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1762 unsigned long orig_jiffies, char_time;
1763 int lsr;
1764
1765 if (info->type == PORT_UNKNOWN)
1766 return;
1767
1768 if (info->xmit_fifo_size == 0)
1769 return; /* Just in case.... */
1770
1771 orig_jiffies = jiffies;
1772 /*
1773 * Set the check interval to be 1/5 of the estimated time to
1774 * send a single character, and make it at least 1. The check
1775 * interval should also be less than the timeout.
1776 *
1777 * Note: we have to use pretty tight timings here to satisfy
1778 * the NIST-PCTS.
1779 */
1780 char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
1781 char_time = char_time / 5;
1782 if (char_time == 0)
1783 char_time = 1;
1784 if (timeout && timeout < char_time)
1785 char_time = timeout;
1786 /*
1787 * If the transmitter hasn't cleared in twice the approximate
1788 * amount of time to send the entire FIFO, it probably won't
1789 * ever clear. This assumes the UART isn't doing flow
1790 * control, which is currently the case. Hence, if it ever
1791 * takes longer than info->timeout, this is probably due to a
1792 * UART bug of some kind. So, we clamp the timeout parameter at
1793 * 2*info->timeout.
1794 */
1795 if (!timeout || timeout > 2 * info->timeout)
1796 timeout = 2 * info->timeout;
1797#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
1798 printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
1799 printk("jiff=%lu...", jiffies);
1800#endif
1801 while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) {
1802#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
1803 printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
1804#endif
1805 set_current_state(TASK_INTERRUPTIBLE);
1806 schedule_timeout(char_time);
1807 if (signal_pending(current))
1808 break;
1809 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1810 break;
1811 }
1812 set_current_state(TASK_RUNNING);
1813
1814#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
1815 printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
1816#endif
1817}
1818
1819
1820/*
1821 * This routine is called by tty_hangup() when a hangup is signaled.
1822 */
1823void mxser_hangup(struct tty_struct *tty)
1824{
1825 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1826
1827 mxser_flush_buffer(tty);
1828 mxser_shutdown(info);
1829 info->event = 0;
1830 info->count = 0;
1831 info->flags &= ~ASYNC_NORMAL_ACTIVE;
1832 info->tty = NULL;
1833 wake_up_interruptible(&info->open_wait);
1834}
1835
1836
1837// added by James 03-12-2004.
1838/*
1839 * mxser_rs_break() --- routine which turns the break handling on or off
1840 */
1841static void mxser_rs_break(struct tty_struct *tty, int break_state)
1842{
1843 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
1844 unsigned long flags;
1845
1846 spin_lock_irqsave(&info->slock, flags);
1847 if (break_state == -1)
1848 outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR);
1849 else
1850 outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR);
1851 spin_unlock_irqrestore(&info->slock, flags);
1852}
1853
1854// (above) added by James.
1855
1856
1857/*
1858 * This is the serial driver's generic interrupt routine
1859 */
1860static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1861{
1862 int status, iir, i;
1863 struct mxser_struct *info;
1864 struct mxser_struct *port;
1865 int max, irqbits, bits, msr;
1866 int pass_counter = 0;
1867 int handled = IRQ_NONE;
1868
1869 port = NULL;
1870 //spin_lock(&gm_lock);
1871
1872 for (i = 0; i < MXSER_BOARDS; i++) {
1873 if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
1874 port = dev_id;
1875 break;
1876 }
1877 }
1878
1879 if (i == MXSER_BOARDS) {
1880 goto irq_stop;
1881 }
1882 if (port == 0) {
1883 goto irq_stop;
1884 }
1885 max = mxser_numports[mxsercfg[i].board_type - 1];
1886 while (1) {
1887 irqbits = inb(port->vector) & port->vectormask;
1888 if (irqbits == port->vectormask) {
1889 break;
1890 }
1891
1892 handled = IRQ_HANDLED;
1893 for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
1894 if (irqbits == port->vectormask) {
1895 break;
1896 }
1897 if (bits & irqbits)
1898 continue;
1899 info = port + i;
1900
1901 // following add by Victor Yu. 09-13-2002
1902 iir = inb(info->base + UART_IIR);
1903 if (iir & UART_IIR_NO_INT)
1904 continue;
1905 iir &= MOXA_MUST_IIR_MASK;
1906 if (!info->tty) {
1907 status = inb(info->base + UART_LSR);
1908 outb(0x27, info->base + UART_FCR);
1909 inb(info->base + UART_MSR);
1910 continue;
1911 }
1912 // above add by Victor Yu. 09-13-2002
1913 /*
1914 if ( info->tty->flip.count < TTY_FLIPBUF_SIZE/4 ){
1915 info->IER |= MOXA_MUST_RECV_ISR;
1916 outb(info->IER, info->base + UART_IER);
1917 }
1918 */
1919
1920
1921 /* mask by Victor Yu. 09-13-2002
1922 if ( !info->tty ||
1923 (inb(info->base + UART_IIR) & UART_IIR_NO_INT) )
1924 continue;
1925 */
1926 /* mask by Victor Yu. 09-02-2002
1927 status = inb(info->base + UART_LSR) & info->read_status_mask;
1928 */
1929
1930 // following add by Victor Yu. 09-02-2002
1931 status = inb(info->base + UART_LSR);
1932
1933 if (status & UART_LSR_PE) {
1934 info->err_shadow |= NPPI_NOTIFY_PARITY;
1935 }
1936 if (status & UART_LSR_FE) {
1937 info->err_shadow |= NPPI_NOTIFY_FRAMING;
1938 }
1939 if (status & UART_LSR_OE) {
1940 info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN;
1941 }
1942 if (status & UART_LSR_BI)
1943 info->err_shadow |= NPPI_NOTIFY_BREAK;
1944
1945 if (info->IsMoxaMustChipFlag) {
1946 /*
1947 if ( (status & 0x02) && !(status & 0x01) ) {
1948 outb(info->base+UART_FCR, 0x23);
1949 continue;
1950 }
1951 */
1952 if (iir == MOXA_MUST_IIR_GDA || iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR)
1953 mxser_receive_chars(info, &status);
1954
1955 } else {
1956 // above add by Victor Yu. 09-02-2002
1957
1958 status &= info->read_status_mask;
1959 if (status & UART_LSR_DR)
1960 mxser_receive_chars(info, &status);
1961 }
1962 msr = inb(info->base + UART_MSR);
1963 if (msr & UART_MSR_ANY_DELTA) {
1964 mxser_check_modem_status(info, msr);
1965 }
1966 // following add by Victor Yu. 09-13-2002
1967 if (info->IsMoxaMustChipFlag) {
1968 if ((iir == 0x02) && (status & UART_LSR_THRE)) {
1969 mxser_transmit_chars(info);
1970 }
1971 } else {
1972 // above add by Victor Yu. 09-13-2002
1973
1974 if (status & UART_LSR_THRE) {
1975/* 8-2-99 by William
1976 if ( info->x_char || (info->xmit_cnt > 0) )
1977*/
1978 mxser_transmit_chars(info);
1979 }
1980 }
1981 }
1982 if (pass_counter++ > MXSER_ISR_PASS_LIMIT) {
1983 break; /* Prevent infinite loops */
1984 }
1985 }
1986
1987 irq_stop:
1988 //spin_unlock(&gm_lock);
1989 return handled;
1990}
1991
1992static void mxser_receive_chars(struct mxser_struct *info, int *status)
1993{
1994 struct tty_struct *tty = info->tty;
1995 unsigned char ch, gdl;
1996 int ignored = 0;
1997 int cnt = 0;
1998 unsigned char *cp;
1999 char *fp;
2000 int count;
2001 int recv_room;
2002 int max = 256;
2003 unsigned long flags;
2004
2005 spin_lock_irqsave(&info->slock, flags);
2006
2007 recv_room = tty->ldisc.receive_room(tty);
2008 if ((recv_room == 0) && (!info->ldisc_stop_rx)) {
2009 //mxser_throttle(tty);
2010 mxser_stoprx(tty);
2011 //return;
2012 }
2013
2014 cp = tty->flip.char_buf;
2015 fp = tty->flip.flag_buf;
2016 count = 0;
2017
2018 // following add by Victor Yu. 09-02-2002
2019 if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
2020
2021 if (*status & UART_LSR_SPECIAL) {
2022 goto intr_old;
2023 }
2024 // following add by Victor Yu. 02-11-2004
2025 if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID && (*status & MOXA_MUST_LSR_RERR))
2026 goto intr_old;
2027 // above add by Victor Yu. 02-14-2004
2028 if (*status & MOXA_MUST_LSR_RERR)
2029 goto intr_old;
2030
2031 gdl = inb(info->base + MOXA_MUST_GDL_REGISTER);
2032
2033 if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID) // add by Victor Yu. 02-11-2004
2034 gdl &= MOXA_MUST_GDL_MASK;
2035 if (gdl >= recv_room) {
2036 if (!info->ldisc_stop_rx) {
2037 //mxser_throttle(tty);
2038 mxser_stoprx(tty);
2039 }
2040 //return;
2041 }
2042 while (gdl--) {
2043 ch = inb(info->base + UART_RX);
2044 count++;
2045 *cp++ = ch;
2046 *fp++ = 0;
2047 cnt++;
2048 /*
2049 if((count>=HI_WATER) && (info->stop_rx==0)){
2050 mxser_stoprx(tty);
2051 info->stop_rx=1;
2052 break;
2053 } */
2054 }
2055 goto end_intr;
2056 }
2057intr_old:
2058 // above add by Victor Yu. 09-02-2002
2059
2060 do {
2061 if (max-- < 0)
2062 break;
2063 /*
2064 if((count>=HI_WATER) && (info->stop_rx==0)){
2065 mxser_stoprx(tty);
2066 info->stop_rx=1;
2067 break;
2068 }
2069 */
2070
2071 ch = inb(info->base + UART_RX);
2072 // following add by Victor Yu. 09-02-2002
2073 if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ )
2074 outb(0x23, info->base + UART_FCR);
2075 *status &= info->read_status_mask;
2076 // above add by Victor Yu. 09-02-2002
2077 if (*status & info->ignore_status_mask) {
2078 if (++ignored > 100)
2079 break;
2080 } else {
2081 count++;
2082 if (*status & UART_LSR_SPECIAL) {
2083 if (*status & UART_LSR_BI) {
2084 *fp++ = TTY_BREAK;
2085/* added by casper 1/11/2000 */
2086 info->icount.brk++;
2087
2088/* */
2089 if (info->flags & ASYNC_SAK)
2090 do_SAK(tty);
2091 } else if (*status & UART_LSR_PE) {
2092 *fp++ = TTY_PARITY;
2093/* added by casper 1/11/2000 */
2094 info->icount.parity++;
2095/* */
2096 } else if (*status & UART_LSR_FE) {
2097 *fp++ = TTY_FRAME;
2098/* added by casper 1/11/2000 */
2099 info->icount.frame++;
2100/* */
2101 } else if (*status & UART_LSR_OE) {
2102 *fp++ = TTY_OVERRUN;
2103/* added by casper 1/11/2000 */
2104 info->icount.overrun++;
2105/* */
2106 } else
2107 *fp++ = 0;
2108 } else
2109 *fp++ = 0;
2110 *cp++ = ch;
2111 cnt++;
2112 if (cnt >= recv_room) {
2113 if (!info->ldisc_stop_rx) {
2114 //mxser_throttle(tty);
2115 mxser_stoprx(tty);
2116 }
2117 break;
2118 }
2119
2120 }
2121
2122 // following add by Victor Yu. 09-02-2002
2123 if (info->IsMoxaMustChipFlag)
2124 break;
2125 // above add by Victor Yu. 09-02-2002
2126
2127 /* mask by Victor Yu. 09-02-2002
2128 *status = inb(info->base + UART_LSR) & info->read_status_mask;
2129 */
2130 // following add by Victor Yu. 09-02-2002
2131 *status = inb(info->base + UART_LSR);
2132 // above add by Victor Yu. 09-02-2002
2133 } while (*status & UART_LSR_DR);
2134
2135 end_intr: // add by Victor Yu. 09-02-2002
2136
2137 mxvar_log.rxcnt[info->port] += cnt;
2138 info->mon_data.rxcnt += cnt;
2139 info->mon_data.up_rxcnt += cnt;
2140 spin_unlock_irqrestore(&info->slock, flags);
2141
2142 tty_flip_buffer_push(tty);
2143}
2144
2145static void mxser_transmit_chars(struct mxser_struct *info)
2146{
2147 int count, cnt;
2148 unsigned long flags;
2149
2150 spin_lock_irqsave(&info->slock, flags);
2151
2152 if (info->x_char) {
2153 outb(info->x_char, info->base + UART_TX);
2154 info->x_char = 0;
2155 mxvar_log.txcnt[info->port]++;
2156 info->mon_data.txcnt++;
2157 info->mon_data.up_txcnt++;
2158
2159/* added by casper 1/11/2000 */
2160 info->icount.tx++;
2161/* */
2162 spin_unlock_irqrestore(&info->slock, flags);
2163 return;
2164 }
2165
2166 if (info->xmit_buf == 0) {
2167 spin_unlock_irqrestore(&info->slock, flags);
2168 return;
2169 }
2170
2171 if ((info->xmit_cnt <= 0) || info->tty->stopped || (info->tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag))) {
2172 info->IER &= ~UART_IER_THRI;
2173 outb(info->IER, info->base + UART_IER);
2174 spin_unlock_irqrestore(&info->slock, flags);
2175 return;
2176 }
2177
2178 cnt = info->xmit_cnt;
2179 count = info->xmit_fifo_size;
2180 do {
2181 outb(info->xmit_buf[info->xmit_tail++], info->base + UART_TX);
2182 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1);
2183 if (--info->xmit_cnt <= 0)
2184 break;
2185 } while (--count > 0);
2186 mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt);
2187
2188// added by James 03-12-2004.
2189 info->mon_data.txcnt += (cnt - info->xmit_cnt);
2190 info->mon_data.up_txcnt += (cnt - info->xmit_cnt);
2191// (above) added by James.
2192
2193/* added by casper 1/11/2000 */
2194 info->icount.tx += (cnt - info->xmit_cnt);
2195/* */
2196
2197 if (info->xmit_cnt < WAKEUP_CHARS) {
2198 set_bit(MXSER_EVENT_TXLOW, &info->event);
2199 schedule_work(&info->tqueue);
2200 }
2201 if (info->xmit_cnt <= 0) {
2202 info->IER &= ~UART_IER_THRI;
2203 outb(info->IER, info->base + UART_IER);
2204 }
2205 spin_unlock_irqrestore(&info->slock, flags);
2206}
2207
2208static void mxser_check_modem_status(struct mxser_struct *info, int status)
2209{
2210 /* update input line counters */
2211 if (status & UART_MSR_TERI)
2212 info->icount.rng++;
2213 if (status & UART_MSR_DDSR)
2214 info->icount.dsr++;
2215 if (status & UART_MSR_DDCD)
2216 info->icount.dcd++;
2217 if (status & UART_MSR_DCTS)
2218 info->icount.cts++;
2219 info->mon_data.modem_status = status;
2220 wake_up_interruptible(&info->delta_msr_wait);
2221
2222
2223 if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
2224 if (status & UART_MSR_DCD)
2225 wake_up_interruptible(&info->open_wait);
2226 schedule_work(&info->tqueue);
2227 }
2228
2229 if (info->flags & ASYNC_CTS_FLOW) {
2230 if (info->tty->hw_stopped) {
2231 if (status & UART_MSR_CTS) {
2232 info->tty->hw_stopped = 0;
2233
2234 if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
2235 info->IER |= UART_IER_THRI;
2236 outb(info->IER, info->base + UART_IER);
2237 }
2238 set_bit(MXSER_EVENT_TXLOW, &info->event);
2239 schedule_work(&info->tqueue); }
2240 } else {
2241 if (!(status & UART_MSR_CTS)) {
2242 info->tty->hw_stopped = 1;
2243 if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
2244 info->IER &= ~UART_IER_THRI;
2245 outb(info->IER, info->base + UART_IER);
2246 }
2247 }
2248 }
2249 }
2250}
2251
2252static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info)
2253{
2254 DECLARE_WAITQUEUE(wait, current);
2255 int retval;
2256 int do_clocal = 0;
2257 unsigned long flags;
2258
2259 /*
2260 * If non-blocking mode is set, or the port is not enabled,
2261 * then make the check up front and then exit.
2262 */
2263 if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
2264 info->flags |= ASYNC_NORMAL_ACTIVE;
2265 return (0);
2266 }
2267
2268 if (tty->termios->c_cflag & CLOCAL)
2269 do_clocal = 1;
2270
2271 /*
2272 * Block waiting for the carrier detect and the line to become
2273 * free (i.e., not in use by the callout). While we are in
2274 * this loop, info->count is dropped by one, so that
2275 * mxser_close() knows when to free things. We restore it upon
2276 * exit, either normal or abnormal.
2277 */
2278 retval = 0;
2279 add_wait_queue(&info->open_wait, &wait);
2280
2281 spin_lock_irqsave(&info->slock, flags);
2282 if (!tty_hung_up_p(filp))
2283 info->count--;
2284 spin_unlock_irqrestore(&info->slock, flags);
2285 info->blocked_open++;
2286 while (1) {
2287 spin_lock_irqsave(&info->slock, flags);
2288 outb(inb(info->base + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR);
2289 spin_unlock_irqrestore(&info->slock, flags);
2290 set_current_state(TASK_INTERRUPTIBLE);
2291 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) {
2292 if (info->flags & ASYNC_HUP_NOTIFY)
2293 retval = -EAGAIN;
2294 else
2295 retval = -ERESTARTSYS;
2296 break;
2297 }
2298 if (!(info->flags & ASYNC_CLOSING) && (do_clocal || (inb(info->base + UART_MSR) & UART_MSR_DCD)))
2299 break;
2300 if (signal_pending(current)) {
2301 retval = -ERESTARTSYS;
2302 break;
2303 }
2304 schedule();
2305 }
2306 set_current_state(TASK_RUNNING);
2307 remove_wait_queue(&info->open_wait, &wait);
2308 if (!tty_hung_up_p(filp))
2309 info->count++;
2310 info->blocked_open--;
2311 if (retval)
2312 return (retval);
2313 info->flags |= ASYNC_NORMAL_ACTIVE;
2314 return (0);
2315}
2316
2317static int mxser_startup(struct mxser_struct *info)
2318{
2319
2320 unsigned long page;
2321 unsigned long flags;
2322
2323 page = __get_free_page(GFP_KERNEL);
2324 if (!page)
2325 return (-ENOMEM);
2326
2327 spin_lock_irqsave(&info->slock, flags);
2328
2329 if (info->flags & ASYNC_INITIALIZED) {
2330 free_page(page);
2331 spin_unlock_irqrestore(&info->slock, flags);
2332 return (0);
2333 }
2334
2335 if (!info->base || !info->type) {
2336 if (info->tty)
2337 set_bit(TTY_IO_ERROR, &info->tty->flags);
2338 free_page(page);
2339 spin_unlock_irqrestore(&info->slock, flags);
2340 return (0);
2341 }
2342 if (info->xmit_buf)
2343 free_page(page);
2344 else
2345 info->xmit_buf = (unsigned char *) page;
2346
2347 /*
2348 * Clear the FIFO buffers and disable them
2349 * (they will be reenabled in mxser_change_speed())
2350 */
2351 if (info->IsMoxaMustChipFlag)
2352 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
2353 else
2354 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
2355
2356 /*
2357 * At this point there's no way the LSR could still be 0xFF;
2358 * if it is, then bail out, because there's likely no UART
2359 * here.
2360 */
2361 if (inb(info->base + UART_LSR) == 0xff) {
2362 spin_unlock_irqrestore(&info->slock, flags);
2363 if (capable(CAP_SYS_ADMIN)) {
2364 if (info->tty)
2365 set_bit(TTY_IO_ERROR, &info->tty->flags);
2366 return (0);
2367 } else
2368 return (-ENODEV);
2369 }
2370
2371 /*
2372 * Clear the interrupt registers.
2373 */
2374 (void) inb(info->base + UART_LSR);
2375 (void) inb(info->base + UART_RX);
2376 (void) inb(info->base + UART_IIR);
2377 (void) inb(info->base + UART_MSR);
2378
2379 /*
2380 * Now, initialize the UART
2381 */
2382 outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */
2383 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
2384 outb(info->MCR, info->base + UART_MCR);
2385
2386 /*
2387 * Finally, enable interrupts
2388 */
2389 info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
2390// info->IER = UART_IER_RLSI | UART_IER_RDI;
2391
2392 // following add by Victor Yu. 08-30-2002
2393 if (info->IsMoxaMustChipFlag)
2394 info->IER |= MOXA_MUST_IER_EGDAI;
2395 // above add by Victor Yu. 08-30-2002
2396 outb(info->IER, info->base + UART_IER); /* enable interrupts */
2397
2398 /*
2399 * And clear the interrupt registers again for luck.
2400 */
2401 (void) inb(info->base + UART_LSR);
2402 (void) inb(info->base + UART_RX);
2403 (void) inb(info->base + UART_IIR);
2404 (void) inb(info->base + UART_MSR);
2405
2406 if (info->tty)
2407 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2408 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2409
2410 /*
2411 * and set the speed of the serial port
2412 */
2413 spin_unlock_irqrestore(&info->slock, flags);
2414 mxser_change_speed(info, NULL);
2415
2416 info->flags |= ASYNC_INITIALIZED;
2417 return (0);
2418}
2419
2420/*
2421 * This routine will shutdown a serial port; interrupts maybe disabled, and
2422 * DTR is dropped if the hangup on close termio flag is on.
2423 */
2424static void mxser_shutdown(struct mxser_struct *info)
2425{
2426 unsigned long flags;
2427
2428 if (!(info->flags & ASYNC_INITIALIZED))
2429 return;
2430
2431 spin_lock_irqsave(&info->slock, flags);
2432
2433 /*
2434 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
2435 * here so the queue might never be waken up
2436 */
2437 wake_up_interruptible(&info->delta_msr_wait);
2438
2439 /*
2440 * Free the IRQ, if necessary
2441 */
2442 if (info->xmit_buf) {
2443 free_page((unsigned long) info->xmit_buf);
2444 info->xmit_buf = NULL;
2445 }
2446
2447 info->IER = 0;
2448 outb(0x00, info->base + UART_IER);
2449
2450 if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
2451 info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
2452 outb(info->MCR, info->base + UART_MCR);
2453
2454 /* clear Rx/Tx FIFO's */
2455 // following add by Victor Yu. 08-30-2002
2456 if (info->IsMoxaMustChipFlag)
2457 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
2458 else
2459 // above add by Victor Yu. 08-30-2002
2460 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
2461
2462 /* read data port to reset things */
2463 (void) inb(info->base + UART_RX);
2464
2465 if (info->tty)
2466 set_bit(TTY_IO_ERROR, &info->tty->flags);
2467
2468 info->flags &= ~ASYNC_INITIALIZED;
2469
2470 // following add by Victor Yu. 09-23-2002
2471 if (info->IsMoxaMustChipFlag) {
2472 SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base);
2473 }
2474 // above add by Victor Yu. 09-23-2002
2475
2476 spin_unlock_irqrestore(&info->slock, flags);
2477}
2478
2479/*
2480 * This routine is called to set the UART divisor registers to match
2481 * the specified baud rate for a serial port.
2482 */
2483static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios)
2484{
2485 unsigned cflag, cval, fcr;
2486 int ret = 0;
2487 unsigned char status;
2488 long baud;
2489 unsigned long flags;
2490
2491
2492 if (!info->tty || !info->tty->termios)
2493 return ret;
2494 cflag = info->tty->termios->c_cflag;
2495 if (!(info->base))
2496 return ret;
2497
2498
2499#ifndef B921600
2500#define B921600 (B460800 +1)
2501#endif
2502 if (mxser_set_baud_method[info->port] == 0) {
2503 switch (cflag & (CBAUD | CBAUDEX)) {
2504 case B921600:
2505 baud = 921600;
2506 break;
2507 case B460800:
2508 baud = 460800;
2509 break;
2510 case B230400:
2511 baud = 230400;
2512 break;
2513 case B115200:
2514 baud = 115200;
2515 break;
2516 case B57600:
2517 baud = 57600;
2518 break;
2519 case B38400:
2520 baud = 38400;
2521 break;
2522 case B19200:
2523 baud = 19200;
2524 break;
2525 case B9600:
2526 baud = 9600;
2527 break;
2528 case B4800:
2529 baud = 4800;
2530 break;
2531 case B2400:
2532 baud = 2400;
2533 break;
2534 case B1800:
2535 baud = 1800;
2536 break;
2537 case B1200:
2538 baud = 1200;
2539 break;
2540 case B600:
2541 baud = 600;
2542 break;
2543 case B300:
2544 baud = 300;
2545 break;
2546 case B200:
2547 baud = 200;
2548 break;
2549 case B150:
2550 baud = 150;
2551 break;
2552 case B134:
2553 baud = 134;
2554 break;
2555 case B110:
2556 baud = 110;
2557 break;
2558 case B75:
2559 baud = 75;
2560 break;
2561 case B50:
2562 baud = 50;
2563 break;
2564 default:
2565 baud = 0;
2566 break;
2567 }
2568 mxser_set_baud(info, baud);
2569 }
2570
2571 /* byte size and parity */
2572 switch (cflag & CSIZE) {
2573 case CS5:
2574 cval = 0x00;
2575 break;
2576 case CS6:
2577 cval = 0x01;
2578 break;
2579 case CS7:
2580 cval = 0x02;
2581 break;
2582 case CS8:
2583 cval = 0x03;
2584 break;
2585 default:
2586 cval = 0x00;
2587 break; /* too keep GCC shut... */
2588 }
2589 if (cflag & CSTOPB)
2590 cval |= 0x04;
2591 if (cflag & PARENB)
2592 cval |= UART_LCR_PARITY;
2593 if (!(cflag & PARODD)) {
2594 cval |= UART_LCR_EPAR;
2595 }
2596 if (cflag & CMSPAR)
2597 cval |= UART_LCR_SPAR;
2598
2599 if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
2600 if (info->IsMoxaMustChipFlag) {
2601 fcr = UART_FCR_ENABLE_FIFO;
2602 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
2603 SET_MOXA_MUST_FIFO_VALUE(info);
2604 } else
2605 fcr = 0;
2606 } else {
2607 fcr = UART_FCR_ENABLE_FIFO;
2608 // following add by Victor Yu. 08-30-2002
2609 if (info->IsMoxaMustChipFlag) {
2610 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
2611 SET_MOXA_MUST_FIFO_VALUE(info);
2612 } else {
2613 // above add by Victor Yu. 08-30-2002
2614
2615 switch (info->rx_trigger) {
2616 case 1:
2617 fcr |= UART_FCR_TRIGGER_1;
2618 break;
2619 case 4:
2620 fcr |= UART_FCR_TRIGGER_4;
2621 break;
2622 case 8:
2623 fcr |= UART_FCR_TRIGGER_8;
2624 break;
2625 default:
2626 fcr |= UART_FCR_TRIGGER_14;
2627 break;
2628 }
2629 }
2630 }
2631
2632 /* CTS flow control flag and modem status interrupts */
2633 info->IER &= ~UART_IER_MSI;
2634 info->MCR &= ~UART_MCR_AFE;
2635 if (cflag & CRTSCTS) {
2636 info->flags |= ASYNC_CTS_FLOW;
2637 info->IER |= UART_IER_MSI;
2638 if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) {
2639 info->MCR |= UART_MCR_AFE;
2640 //status = mxser_get_msr(info->base, 0, info->port);
2641/* save_flags(flags);
2642 cli();
2643 status = inb(baseaddr + UART_MSR);
2644 restore_flags(flags);*/
2645 //mxser_check_modem_status(info, status);
2646 } else {
2647 //status = mxser_get_msr(info->base, 0, info->port);
2648
2649 //MX_LOCK(&info->slock);
2650 status = inb(info->base + UART_MSR);
2651 //MX_UNLOCK(&info->slock);
2652 if (info->tty->hw_stopped) {
2653 if (status & UART_MSR_CTS) {
2654 info->tty->hw_stopped = 0;
2655 if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
2656 info->IER |= UART_IER_THRI;
2657 outb(info->IER, info->base + UART_IER);
2658 }
2659 set_bit(MXSER_EVENT_TXLOW, &info->event);
2660 schedule_work(&info->tqueue); }
2661 } else {
2662 if (!(status & UART_MSR_CTS)) {
2663 info->tty->hw_stopped = 1;
2664 if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
2665 info->IER &= ~UART_IER_THRI;
2666 outb(info->IER, info->base + UART_IER);
2667 }
2668 }
2669 }
2670 }
2671 } else {
2672 info->flags &= ~ASYNC_CTS_FLOW;
2673 }
2674 outb(info->MCR, info->base + UART_MCR);
2675 if (cflag & CLOCAL) {
2676 info->flags &= ~ASYNC_CHECK_CD;
2677 } else {
2678 info->flags |= ASYNC_CHECK_CD;
2679 info->IER |= UART_IER_MSI;
2680 }
2681 outb(info->IER, info->base + UART_IER);
2682
2683 /*
2684 * Set up parity check flag
2685 */
2686 info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
2687 if (I_INPCK(info->tty))
2688 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
2689 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2690 info->read_status_mask |= UART_LSR_BI;
2691
2692 info->ignore_status_mask = 0;
2693
2694 if (I_IGNBRK(info->tty)) {
2695 info->ignore_status_mask |= UART_LSR_BI;
2696 info->read_status_mask |= UART_LSR_BI;
2697 /*
2698 * If we're ignore parity and break indicators, ignore
2699 * overruns too. (For real raw support).
2700 */
2701 if (I_IGNPAR(info->tty)) {
2702 info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE;
2703 info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE;
2704 }
2705 }
2706 // following add by Victor Yu. 09-02-2002
2707 if (info->IsMoxaMustChipFlag) {
2708 spin_lock_irqsave(&info->slock, flags);
2709 SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty));
2710 SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty));
2711 if (I_IXON(info->tty)) {
2712 ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
2713 } else {
2714 DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
2715 }
2716 if (I_IXOFF(info->tty)) {
2717 ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
2718 } else {
2719 DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
2720 }
2721 /*
2722 if ( I_IXANY(info->tty) ) {
2723 info->MCR |= MOXA_MUST_MCR_XON_ANY;
2724 ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
2725 } else {
2726 info->MCR &= ~MOXA_MUST_MCR_XON_ANY;
2727 DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
2728 }
2729 */
2730 spin_unlock_irqrestore(&info->slock, flags);
2731 }
2732 // above add by Victor Yu. 09-02-2002
2733
2734
2735 outb(fcr, info->base + UART_FCR); /* set fcr */
2736 outb(cval, info->base + UART_LCR);
2737
2738 return ret;
2739}
2740
2741
2742static int mxser_set_baud(struct mxser_struct *info, long newspd)
2743{
2744 int quot = 0;
2745 unsigned char cval;
2746 int ret = 0;
2747 unsigned long flags;
2748
2749 if (!info->tty || !info->tty->termios)
2750 return ret;
2751
2752 if (!(info->base))
2753 return ret;
2754
2755 if (newspd > info->MaxCanSetBaudRate)
2756 return 0;
2757
2758 info->realbaud = newspd;
2759 if (newspd == 134) {
2760 quot = (2 * info->baud_base / 269);
2761 } else if (newspd) {
2762 quot = info->baud_base / newspd;
2763
2764 if (quot == 0)
2765 quot = 1;
2766
2767 } else {
2768 quot = 0;
2769 }
2770
2771 info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
2772 info->timeout += HZ / 50; /* Add .02 seconds of slop */
2773
2774 if (quot) {
2775 spin_lock_irqsave(&info->slock, flags);
2776 info->MCR |= UART_MCR_DTR;
2777 outb(info->MCR, info->base + UART_MCR);
2778 spin_unlock_irqrestore(&info->slock, flags);
2779 } else {
2780 spin_lock_irqsave(&info->slock, flags);
2781 info->MCR &= ~UART_MCR_DTR;
2782 outb(info->MCR, info->base + UART_MCR);
2783 spin_unlock_irqrestore(&info->slock, flags);
2784 return ret;
2785 }
2786
2787 cval = inb(info->base + UART_LCR);
2788
2789 outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */
2790
2791 outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */
2792 outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */
2793 outb(cval, info->base + UART_LCR); /* reset DLAB */
2794
2795
2796 return ret;
2797}
2798
2799
2800
2801/*
2802 * ------------------------------------------------------------
2803 * friends of mxser_ioctl()
2804 * ------------------------------------------------------------
2805 */
2806static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo)
2807{
2808 struct serial_struct tmp;
2809
2810 if (!retinfo)
2811 return (-EFAULT);
2812 memset(&tmp, 0, sizeof(tmp));
2813 tmp.type = info->type;
2814 tmp.line = info->port;
2815 tmp.port = info->base;
2816 tmp.irq = info->irq;
2817 tmp.flags = info->flags;
2818 tmp.baud_base = info->baud_base;
2819 tmp.close_delay = info->close_delay;
2820 tmp.closing_wait = info->closing_wait;
2821 tmp.custom_divisor = info->custom_divisor;
2822 tmp.hub6 = 0;
2823 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
2824 return -EFAULT;
2825 return (0);
2826}
2827
2828static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info)
2829{
2830 struct serial_struct new_serial;
2831 unsigned int flags;
2832 int retval = 0;
2833
2834 if (!new_info || !info->base)
2835 return (-EFAULT);
2836 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2837 return -EFAULT;
2838
2839 if ((new_serial.irq != info->irq) || (new_serial.port != info->base) || (new_serial.custom_divisor != info->custom_divisor) || (new_serial.baud_base != info->baud_base))
2840 return (-EPERM);
2841
2842 flags = info->flags & ASYNC_SPD_MASK;
2843
2844 if (!capable(CAP_SYS_ADMIN)) {
2845 if ((new_serial.baud_base != info->baud_base) || (new_serial.close_delay != info->close_delay) || ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK)))
2846 return (-EPERM);
2847 info->flags = ((info->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK));
2848 } else {
2849 /*
2850 * OK, past this point, all the error checking has been done.
2851 * At this point, we start making changes.....
2852 */
2853 info->flags = ((info->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS));
2854 info->close_delay = new_serial.close_delay * HZ / 100;
2855 info->closing_wait = new_serial.closing_wait * HZ / 100;
2856 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2857 info->tty->low_latency = 0; //(info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2858 }
2859
2860 /* added by casper, 3/17/2000, for mouse */
2861 info->type = new_serial.type;
2862
2863 process_txrx_fifo(info);
2864
2865 /* */
2866 if (info->flags & ASYNC_INITIALIZED) {
2867 if (flags != (info->flags & ASYNC_SPD_MASK)) {
2868 mxser_change_speed(info, NULL);
2869 }
2870 } else {
2871 retval = mxser_startup(info);
2872 }
2873 return (retval);
2874}
2875
2876/*
2877 * mxser_get_lsr_info - get line status register info
2878 *
2879 * Purpose: Let user call ioctl() to get info when the UART physically
2880 * is emptied. On bus types like RS485, the transmitter must
2881 * release the bus after transmitting. This must be done when
2882 * the transmit shift register is empty, not be done when the
2883 * transmit holding register is empty. This functionality
2884 * allows an RS485 driver to be written in user space.
2885 */
2886static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value)
2887{
2888 unsigned char status;
2889 unsigned int result;
2890 unsigned long flags;
2891
2892 spin_lock_irqsave(&info->slock, flags);
2893 status = inb(info->base + UART_LSR);
2894 spin_unlock_irqrestore(&info->slock, flags);
2895 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
2896 return put_user(result, value);
2897}
2898
2899/*
2900 * This routine sends a break character out the serial port.
2901 */
2902static void mxser_send_break(struct mxser_struct *info, int duration)
2903{
2904 unsigned long flags;
2905
2906 if (!info->base)
2907 return;
2908 set_current_state(TASK_INTERRUPTIBLE);
2909 spin_lock_irqsave(&info->slock, flags);
2910 outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR);
2911 spin_unlock_irqrestore(&info->slock, flags);
2912 schedule_timeout(duration);
2913 spin_lock_irqsave(&info->slock, flags);
2914 outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR);
2915 spin_unlock_irqrestore(&info->slock, flags);
2916}
2917
2918static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
2919{
2920 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
2921 unsigned char control, status;
2922 unsigned long flags;
2923
2924
2925 if (tty->index == MXSER_PORTS)
2926 return (-ENOIOCTLCMD);
2927 if (tty->flags & (1 << TTY_IO_ERROR))
2928 return (-EIO);
2929
2930 control = info->MCR;
2931
2932 spin_lock_irqsave(&info->slock, flags);
2933 status = inb(info->base + UART_MSR);
2934 if (status & UART_MSR_ANY_DELTA)
2935 mxser_check_modem_status(info, status);
2936 spin_unlock_irqrestore(&info->slock, flags);
2937 return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
2938 ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
2939}
2940
2941static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
2942{
2943 struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
2944 unsigned long flags;
2945
2946
2947 if (tty->index == MXSER_PORTS)
2948 return -ENOIOCTLCMD;
2949 if (tty->flags & (1 << TTY_IO_ERROR))
2950 return -EIO;
2951
2952 spin_lock_irqsave(&info->slock, flags);
2953
2954 if (set & TIOCM_RTS)
2955 info->MCR |= UART_MCR_RTS;
2956 if (set & TIOCM_DTR)
2957 info->MCR |= UART_MCR_DTR;
2958
2959 if (clear & TIOCM_RTS)
2960 info->MCR &= ~UART_MCR_RTS;
2961 if (clear & TIOCM_DTR)
2962 info->MCR &= ~UART_MCR_DTR;
2963
2964 outb(info->MCR, info->base + UART_MCR);
2965 spin_unlock_irqrestore(&info->slock, flags);
2966 return 0;
2967}
2968
2969
2970static int mxser_read_register(int, unsigned short *);
2971static int mxser_program_mode(int);
2972static void mxser_normal_mode(int);
2973
2974static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf)
2975{
2976 int id, i, bits;
2977 unsigned short regs[16], irq;
2978 unsigned char scratch, scratch2;
2979
2980 hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART;
2981
2982 id = mxser_read_register(cap, regs);
2983 if (id == C168_ASIC_ID) {
2984 hwconf->board_type = MXSER_BOARD_C168_ISA;
2985 hwconf->ports = 8;
2986 } else if (id == C104_ASIC_ID) {
2987 hwconf->board_type = MXSER_BOARD_C104_ISA;
2988 hwconf->ports = 4;
2989 } else if (id == C102_ASIC_ID) {
2990 hwconf->board_type = MXSER_BOARD_C102_ISA;
2991 hwconf->ports = 2;
2992 } else if (id == CI132_ASIC_ID) {
2993 hwconf->board_type = MXSER_BOARD_CI132;
2994 hwconf->ports = 2;
2995 } else if (id == CI134_ASIC_ID) {
2996 hwconf->board_type = MXSER_BOARD_CI134;
2997 hwconf->ports = 4;
2998 } else if (id == CI104J_ASIC_ID) {
2999 hwconf->board_type = MXSER_BOARD_CI104J;
3000 hwconf->ports = 4;
3001 } else
3002 return (0);
3003
3004 irq = 0;
3005 if (hwconf->ports == 2) {
3006 irq = regs[9] & 0xF000;
3007 irq = irq | (irq >> 4);
3008 if (irq != (regs[9] & 0xFF00))
3009 return (MXSER_ERR_IRQ_CONFLIT);
3010 } else if (hwconf->ports == 4) {
3011 irq = regs[9] & 0xF000;
3012 irq = irq | (irq >> 4);
3013 irq = irq | (irq >> 8);
3014 if (irq != regs[9])
3015 return (MXSER_ERR_IRQ_CONFLIT);
3016 } else if (hwconf->ports == 8) {
3017 irq = regs[9] & 0xF000;
3018 irq = irq | (irq >> 4);
3019 irq = irq | (irq >> 8);
3020 if ((irq != regs[9]) || (irq != regs[10]))
3021 return (MXSER_ERR_IRQ_CONFLIT);
3022 }
3023
3024 if (!irq) {
3025 return (MXSER_ERR_IRQ);
3026 }
3027 hwconf->irq = ((int) (irq & 0xF000) >> 12);
3028 for (i = 0; i < 8; i++)
3029 hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8;
3030 if ((regs[12] & 0x80) == 0) {
3031 return (MXSER_ERR_VECTOR);
3032 }
3033 hwconf->vector = (int) regs[11]; /* interrupt vector */
3034 if (id == 1)
3035 hwconf->vector_mask = 0x00FF;
3036 else
3037 hwconf->vector_mask = 0x000F;
3038 for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
3039 if (regs[12] & bits) {
3040 hwconf->baud_base[i] = 921600;
3041 hwconf->MaxCanSetBaudRate[i] = 921600; // add by Victor Yu. 09-04-2002
3042 } else {
3043 hwconf->baud_base[i] = 115200;
3044 hwconf->MaxCanSetBaudRate[i] = 115200; // add by Victor Yu. 09-04-2002
3045 }
3046 }
3047 scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
3048 outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
3049 outb(0, cap + UART_EFR); /* EFR is the same as FCR */
3050 outb(scratch2, cap + UART_LCR);
3051 outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
3052 scratch = inb(cap + UART_IIR);
3053
3054 if (scratch & 0xC0)
3055 hwconf->uart_type = PORT_16550A;
3056 else
3057 hwconf->uart_type = PORT_16450;
3058 if (id == 1)
3059 hwconf->ports = 8;
3060 else
3061 hwconf->ports = 4;
3062 request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)");
3063 request_region(hwconf->vector, 1, "mxser(vector)");
3064 return (hwconf->ports);
3065}
3066
3067#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
3068#define CHIP_DO 0x02 /* Serial Data Output in Eprom */
3069#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
3070#define CHIP_DI 0x08 /* Serial Data Input in Eprom */
3071#define EN_CCMD 0x000 /* Chip's command register */
3072#define EN0_RSARLO 0x008 /* Remote start address reg 0 */
3073#define EN0_RSARHI 0x009 /* Remote start address reg 1 */
3074#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
3075#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
3076#define EN0_DCFG 0x00E /* Data configuration reg WR */
3077#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
3078#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
3079#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
3080static int mxser_read_register(int port, unsigned short *regs)
3081{
3082 int i, k, value, id;
3083 unsigned int j;
3084
3085 id = mxser_program_mode(port);
3086 if (id < 0)
3087 return (id);
3088 for (i = 0; i < 14; i++) {
3089 k = (i & 0x3F) | 0x180;
3090 for (j = 0x100; j > 0; j >>= 1) {
3091 outb(CHIP_CS, port);
3092 if (k & j) {
3093 outb(CHIP_CS | CHIP_DO, port);
3094 outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
3095 } else {
3096 outb(CHIP_CS, port);
3097 outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
3098 }
3099 }
3100 (void) inb(port);
3101 value = 0;
3102 for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
3103 outb(CHIP_CS, port);
3104 outb(CHIP_CS | CHIP_SK, port);
3105 if (inb(port) & CHIP_DI)
3106 value |= j;
3107 }
3108 regs[i] = value;
3109 outb(0, port);
3110 }
3111 mxser_normal_mode(port);
3112 return (id);
3113}
3114
3115static int mxser_program_mode(int port)
3116{
3117 int id, i, j, n;
3118 //unsigned long flags;
3119
3120 spin_lock(&gm_lock);
3121 outb(0, port);
3122 outb(0, port);
3123 outb(0, port);
3124 (void) inb(port);
3125 (void) inb(port);
3126 outb(0, port);
3127 (void) inb(port);
3128 //restore_flags(flags);
3129 spin_unlock(&gm_lock);
3130
3131 id = inb(port + 1) & 0x1F;
3132 if ((id != C168_ASIC_ID) && (id != C104_ASIC_ID) && (id != C102_ASIC_ID) && (id != CI132_ASIC_ID) && (id != CI134_ASIC_ID) && (id != CI104J_ASIC_ID))
3133 return (-1);
3134 for (i = 0, j = 0; i < 4; i++) {
3135 n = inb(port + 2);
3136 if (n == 'M') {
3137 j = 1;
3138 } else if ((j == 1) && (n == 1)) {
3139 j = 2;
3140 break;
3141 } else
3142 j = 0;
3143 }
3144 if (j != 2)
3145 id = -2;
3146 return (id);
3147}
3148
3149static void mxser_normal_mode(int port)
3150{
3151 int i, n;
3152
3153 outb(0xA5, port + 1);
3154 outb(0x80, port + 3);
3155 outb(12, port + 0); /* 9600 bps */
3156 outb(0, port + 1);
3157 outb(0x03, port + 3); /* 8 data bits */
3158 outb(0x13, port + 4); /* loop back mode */
3159 for (i = 0; i < 16; i++) {
3160 n = inb(port + 5);
3161 if ((n & 0x61) == 0x60)
3162 break;
3163 if ((n & 1) == 1)
3164 (void) inb(port);
3165 }
3166 outb(0x00, port + 4);
3167}
3168
3169module_init(mxser_module_init);
3170module_exit(mxser_module_exit);
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-12 01:14:01 -0500