1 files changed, 0 insertions, 160 deletions

diff --git a/drivers/char/ftape/lowlevel/ftape-init.c b/drivers/char/ftape/lowlevel/ftape-init.c
deleted file mode 100644
index 4998132a81d1..000000000000
--- a/drivers/char/ftape/lowlevel/ftape-init.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *      Copyright (C) 1993-1996 Bas Laarhoven,
- *                (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- *      This file contains the code that interfaces the kernel
- *      for the QIC-40/80/3010/3020 floppy-tape driver for Linux.
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/major.h>
-
-#include <linux/ftape.h>
-#include <linux/init.h>
-#include <linux/qic117.h>
-#ifdef CONFIG_ZFTAPE
-#include <linux/zftape.h>
-#endif
-
-#include "../lowlevel/ftape-init.h"
-#include "../lowlevel/ftape-io.h"
-#include "../lowlevel/ftape-read.h"
-#include "../lowlevel/ftape-write.h"
-#include "../lowlevel/ftape-ctl.h"
-#include "../lowlevel/ftape-rw.h"
-#include "../lowlevel/fdc-io.h"
-#include "../lowlevel/ftape-buffer.h"
-#include "../lowlevel/ftape-proc.h"
-#include "../lowlevel/ftape-tracing.h"
-
-
-#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL)
-static int ft_tracing = -1;
-#endif
-
-
-/*  Called by modules package when installing the driver
- *  or by kernel during the initialization phase
- */
-static int __init ftape_init(void)
-{
-        TRACE_FUN(ft_t_flow);
-
-#ifdef MODULE
-#ifndef CONFIG_FT_NO_TRACE_AT_ALL
-        if (ft_tracing != -1) {
-                ftape_tracing = ft_tracing;
-        }
-#endif
-        printk(KERN_INFO FTAPE_VERSION "\n");
-        if (TRACE_LEVEL >= ft_t_info) {
-                printk(
-KERN_INFO "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl)\n"
-KERN_INFO "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)\n"
-KERN_INFO "(c) 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n"
-KERN_INFO "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives\n");
-        }
-#else /* !MODULE */
-        /* print a short no-nonsense boot message */
-        printk(KERN_INFO FTAPE_VERSION "\n");
-#endif /* MODULE */
-        TRACE(ft_t_info, "installing QIC-117 floppy tape hardware drive ... ");
-        TRACE(ft_t_info, "ftape_init @ 0x%p", ftape_init);
-        /*  Allocate the DMA buffers. They are deallocated at cleanup() time.
-         */
-#ifdef TESTING
-#ifdef MODULE
-        while (ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS) < 0) {
-                ftape_sleep(FT_SECOND/20);
-                if (signal_pending(current)) {
-                        (void)ftape_set_nr_buffers(0);
-                        TRACE(ft_t_bug,
-                              "Killed by signal while allocating buffers.");
-                        TRACE_ABORT(-EINTR, 
-                                    ft_t_bug, "Free up memory and retry");
-                }
-        }
-#else
-        TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS),
-                    (void)ftape_set_nr_buffers(0));
-#endif
-#else
-        TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS),
-                    (void)ftape_set_nr_buffers(0));
-#endif
-        ft_drive_sel = -1;
-        ft_failure   = 1;         /* inhibit any operation but open */
-        ftape_udelay_calibrate(); /* must be before fdc_wait_calibrate ! */
-        fdc_wait_calibrate();
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS)
-        (void)ftape_proc_init();
-#endif
-#ifdef CONFIG_ZFTAPE
-        (void)zft_init();
-#endif
-        TRACE_EXIT 0;
-}
-
-module_param(ft_fdc_base,       uint, 0);
-MODULE_PARM_DESC(ft_fdc_base,  "Base address of FDC controller.");
-module_param(ft_fdc_irq,        uint, 0);
-MODULE_PARM_DESC(ft_fdc_irq,   "IRQ (interrupt channel) to use.");
-module_param(ft_fdc_dma,        uint, 0);
-MODULE_PARM_DESC(ft_fdc_dma,   "DMA channel to use.");
-module_param(ft_fdc_threshold,  uint, 0);
-MODULE_PARM_DESC(ft_fdc_threshold,  "Threshold of the FDC Fifo.");
-module_param(ft_fdc_rate_limit, uint, 0);
-MODULE_PARM_DESC(ft_fdc_rate_limit, "Maximal data rate for FDC.");
-module_param(ft_probe_fc10,     bool, 0);
-MODULE_PARM_DESC(ft_probe_fc10,
-            "If non-zero, probe for a Colorado FC-10/FC-20 controller.");
-module_param(ft_mach2,          bool, 0);
-MODULE_PARM_DESC(ft_mach2,
-            "If non-zero, probe for a Mountain MACH-2 controller.");
-#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL)
-module_param(ft_tracing,        int, 0644);
-MODULE_PARM_DESC(ft_tracing,
-            "Amount of debugging output, 0 <= tracing <= 8, default 3.");
-#endif
-
-MODULE_AUTHOR(
-        "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl), "
-        "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no), "
-        "(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)");
-MODULE_DESCRIPTION(
-        "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives.");
-MODULE_LICENSE("GPL");
-
-static void __exit ftape_exit(void)
-{
-        TRACE_FUN(ft_t_flow);
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS)
-        ftape_proc_destroy();
-#endif
-        (void)ftape_set_nr_buffers(0);
-        printk(KERN_INFO "ftape: unloaded.\n");
-        TRACE_EXIT;
-}
-
-module_init(ftape_init);
-module_exit(ftape_exit);