1 files changed, 263 insertions, 0 deletions
diff --git a/drivers/char/cd1865.h b/drivers/char/cd1865.h
new file mode 100644
index 000000000000..9940966e7a1d
--- /dev/null
+++ b/drivers/char/cd1865.h
@@ -0,0 +1,263 @@
+/*
+ *      linux/drivers/char/cd1865.h -- Definitions relating to the CD1865
+ *                          for the Specialix IO8+ multiport serial driver.
+ *
+ *      Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
+ *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
+ *
+ *      Specialix pays for the development and support of this driver.
+ *      Please DO contact io8-linux@specialix.co.uk if you require
+ *      support.
+ *
+ *      This driver was developped in the BitWizard linux device
+ *      driver service. If you require a linux device driver for your
+ *      product, please contact devices@BitWizard.nl for a quote.
+ *
+ */
+/*
+ * Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards.
+ */
+/* Values of choice for Interrupt ACKs */
+/* These values are "obligatory" if you use the register based
+ * interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865
+ * databook */
+#define SX_ACK_MINT     0x75    /* goes to PILR1                           */
+#define SX_ACK_TINT     0x76    /* goes to PILR2                           */
+#define SX_ACK_RINT     0x77    /* goes to PILR3                           */
+/* Chip ID (is used when chips ar daisy chained.) */
+#define SX_ID           0x10
+/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */
+ 
+#define CD186x_NCH       8       /* Total number of channels                */
+#define CD186x_TPC       16      /* Ticks per character                     */
+#define CD186x_NFIFO     8       /* TX FIFO size                            */
+/* Global registers */
+#define CD186x_GIVR      0x40    /* Global Interrupt Vector Register        */
+#define CD186x_GICR      0x41    /* Global Interrupting Channel Register    */
+#define CD186x_PILR1     0x61    /* Priority Interrupt Level Register 1     */
+#define CD186x_PILR2     0x62    /* Priority Interrupt Level Register 2     */
+#define CD186x_PILR3     0x63    /* Priority Interrupt Level Register 3     */
+#define CD186x_CAR       0x64    /* Channel Access Register                 */
+#define CD186x_SRSR      0x65    /* Channel Access Register                 */
+#define CD186x_GFRCR     0x6b    /* Global Firmware Revision Code Register  */
+#define CD186x_PPRH      0x70    /* Prescaler Period Register High          */
+#define CD186x_PPRL      0x71    /* Prescaler Period Register Low           */
+#define CD186x_RDR       0x78    /* Receiver Data Register                  */
+#define CD186x_RCSR      0x7a    /* Receiver Character Status Register      */
+#define CD186x_TDR       0x7b    /* Transmit Data Register                  */
+#define CD186x_EOIR      0x7f    /* End of Interrupt Register               */
+#define CD186x_MRAR      0x75    /* Modem Request Acknowledge register       */
+#define CD186x_TRAR      0x76    /* Transmit Request Acknowledge register    */
+#define CD186x_RRAR      0x77    /* Receive Request Acknowledge register     */
+#define CD186x_SRCR      0x66    /* Service Request Configuration register  */
+/* Channel Registers */
+#define CD186x_CCR       0x01    /* Channel Command Register                */
+#define CD186x_IER       0x02    /* Interrupt Enable Register               */
+#define CD186x_COR1      0x03    /* Channel Option Register 1               */
+#define CD186x_COR2      0x04    /* Channel Option Register 2               */
+#define CD186x_COR3      0x05    /* Channel Option Register 3               */
+#define CD186x_CCSR      0x06    /* Channel Control Status Register         */
+#define CD186x_RDCR      0x07    /* Receive Data Count Register             */
+#define CD186x_SCHR1     0x09    /* Special Character Register 1            */
+#define CD186x_SCHR2     0x0a    /* Special Character Register 2            */
+#define CD186x_SCHR3     0x0b    /* Special Character Register 3            */
+#define CD186x_SCHR4     0x0c    /* Special Character Register 4            */
+#define CD186x_MCOR1     0x10    /* Modem Change Option 1 Register          */
+#define CD186x_MCOR2     0x11    /* Modem Change Option 2 Register          */
+#define CD186x_MCR       0x12    /* Modem Change Register                   */
+#define CD186x_RTPR      0x18    /* Receive Timeout Period Register         */
+#define CD186x_MSVR      0x28    /* Modem Signal Value Register             */
+#define CD186x_MSVRTS    0x29    /* Modem Signal Value Register             */
+#define CD186x_MSVDTR    0x2a    /* Modem Signal Value Register             */
+#define CD186x_RBPRH     0x31    /* Receive Baud Rate Period Register High  */
+#define CD186x_RBPRL     0x32    /* Receive Baud Rate Period Register Low   */
+#define CD186x_TBPRH     0x39    /* Transmit Baud Rate Period Register High */
+#define CD186x_TBPRL     0x3a    /* Transmit Baud Rate Period Register Low  */
+/* Global Interrupt Vector Register (R/W) */
+#define GIVR_ITMASK     0x07     /* Interrupt type mask                     */
+#define  GIVR_IT_MODEM   0x01    /* Modem Signal Change Interrupt           */
+#define  GIVR_IT_TX      0x02    /* Transmit Data Interrupt                 */
+#define  GIVR_IT_RCV     0x03    /* Receive Good Data Interrupt             */
+#define  GIVR_IT_REXC    0x07    /* Receive Exception Interrupt             */
+/* Global Interrupt Channel Register (R/W) */
+ 
+#define GICR_CHAN       0x1c    /* Channel Number Mask                     */
+#define GICR_CHAN_OFF   2       /* Channel Number shift                    */
+/* Channel Address Register (R/W) */
+#define CAR_CHAN        0x07    /* Channel Number Mask                     */
+#define CAR_A7          0x08    /* A7 Address Extension (unused)           */
+/* Receive Character Status Register (R/O) */
+#define RCSR_TOUT       0x80    /* Rx Timeout                              */
+#define RCSR_SCDET      0x70    /* Special Character Detected Mask         */
+#define  RCSR_NO_SC      0x00   /* No Special Characters Detected          */
+#define  RCSR_SC_1       0x10   /* Special Char 1 (or 1 & 3) Detected      */
+#define  RCSR_SC_2       0x20   /* Special Char 2 (or 2 & 4) Detected      */
+#define  RCSR_SC_3       0x30   /* Special Char 3 Detected                 */
+#define  RCSR_SC_4       0x40   /* Special Char 4 Detected                 */
+#define RCSR_BREAK      0x08    /* Break has been detected                 */
+#define RCSR_PE         0x04    /* Parity Error                            */
+#define RCSR_FE         0x02    /* Frame Error                             */
+#define RCSR_OE         0x01    /* Overrun Error                           */
+/* Channel Command Register (R/W) (commands in groups can be OR-ed) */
+#define CCR_HARDRESET   0x81    /* Reset the chip                          */
+#define CCR_SOFTRESET   0x80    /* Soft Channel Reset                      */
+#define CCR_CORCHG1     0x42    /* Channel Option Register 1 Changed       */
+#define CCR_CORCHG2     0x44    /* Channel Option Register 2 Changed       */
+#define CCR_CORCHG3     0x48    /* Channel Option Register 3 Changed       */
+#define CCR_SSCH1       0x21    /* Send Special Character 1                */
+#define CCR_SSCH2       0x22    /* Send Special Character 2                */
+#define CCR_SSCH3       0x23    /* Send Special Character 3                */
+#define CCR_SSCH4       0x24    /* Send Special Character 4                */
+#define CCR_TXEN        0x18    /* Enable Transmitter                      */
+#define CCR_RXEN        0x12    /* Enable Receiver                         */
+#define CCR_TXDIS       0x14    /* Disable Transmitter                     */
+#define CCR_RXDIS       0x11    /* Disable Receiver                        */
+/* Interrupt Enable Register (R/W) */
+#define IER_DSR         0x80    /* Enable interrupt on DSR change          */
+#define IER_CD          0x40    /* Enable interrupt on CD change           */
+#define IER_CTS         0x20    /* Enable interrupt on CTS change          */
+#define IER_RXD         0x10    /* Enable interrupt on Receive Data        */
+#define IER_RXSC        0x08    /* Enable interrupt on Receive Spec. Char  */
+#define IER_TXRDY       0x04    /* Enable interrupt on TX FIFO empty       */
+#define IER_TXEMPTY     0x02    /* Enable interrupt on TX completely empty */
+#define IER_RET         0x01    /* Enable interrupt on RX Exc. Timeout     */
+/* Channel Option Register 1 (R/W) */
+#define COR1_ODDP       0x80    /* Odd Parity                              */
+#define COR1_PARMODE    0x60    /* Parity Mode mask                        */
+#define  COR1_NOPAR      0x00   /* No Parity                               */
+#define  COR1_FORCEPAR   0x20   /* Force Parity                            */
+#define  COR1_NORMPAR    0x40   /* Normal Parity                           */
+#define COR1_IGNORE     0x10    /* Ignore Parity on RX                     */
+#define COR1_STOPBITS   0x0c    /* Number of Stop Bits                     */
+#define  COR1_1SB        0x00   /* 1 Stop Bit                              */
+#define  COR1_15SB       0x04   /* 1.5 Stop Bits                           */
+#define  COR1_2SB        0x08   /* 2 Stop Bits                             */
+#define COR1_CHARLEN    0x03    /* Character Length                        */
+#define  COR1_5BITS      0x00   /* 5 bits                                  */
+#define  COR1_6BITS      0x01   /* 6 bits                                  */
+#define  COR1_7BITS      0x02   /* 7 bits                                  */
+#define  COR1_8BITS      0x03   /* 8 bits                                  */
+/* Channel Option Register 2 (R/W) */
+#define COR2_IXM        0x80    /* Implied XON mode                        */
+#define COR2_TXIBE      0x40    /* Enable In-Band (XON/XOFF) Flow Control  */
+#define COR2_ETC        0x20    /* Embedded Tx Commands Enable             */
+#define COR2_LLM        0x10    /* Local Loopback Mode                     */
+#define COR2_RLM        0x08    /* Remote Loopback Mode                    */
+#define COR2_RTSAO      0x04    /* RTS Automatic Output Enable             */
+#define COR2_CTSAE      0x02    /* CTS Automatic Enable                    */
+#define COR2_DSRAE      0x01    /* DSR Automatic Enable                    */
+/* Channel Option Register 3 (R/W) */
+#define COR3_XONCH      0x80    /* XON is a pair of characters (1 & 3)     */
+#define COR3_XOFFCH     0x40    /* XOFF is a pair of characters (2 & 4)    */
+#define COR3_FCT        0x20    /* Flow-Control Transparency Mode          */
+#define COR3_SCDE       0x10    /* Special Character Detection Enable      */
+#define COR3_RXTH       0x0f    /* RX FIFO Threshold value (1-8)           */
+/* Channel Control Status Register (R/O) */
+#define CCSR_RXEN       0x80    /* Receiver Enabled                        */
+#define CCSR_RXFLOFF    0x40    /* Receive Flow Off (XOFF was sent)        */
+#define CCSR_RXFLON     0x20    /* Receive Flow On (XON was sent)          */
+#define CCSR_TXEN       0x08    /* Transmitter Enabled                     */
+#define CCSR_TXFLOFF    0x04    /* Transmit Flow Off (got XOFF)            */
+#define CCSR_TXFLON     0x02    /* Transmit Flow On (got XON)              */
+/* Modem Change Option Register 1 (R/W) */
+#define MCOR1_DSRZD     0x80    /* Detect 0->1 transition of DSR           */
+#define MCOR1_CDZD      0x40    /* Detect 0->1 transition of CD            */
+#define MCOR1_CTSZD     0x20    /* Detect 0->1 transition of CTS           */
+#define MCOR1_DTRTH     0x0f    /* Auto DTR flow control Threshold (1-8)   */
+#define  MCOR1_NODTRFC   0x0     /* Automatic DTR flow control disabled     */
+/* Modem Change Option Register 2 (R/W) */
+#define MCOR2_DSROD     0x80    /* Detect 1->0 transition of DSR           */
+#define MCOR2_CDOD      0x40    /* Detect 1->0 transition of CD            */
+#define MCOR2_CTSOD     0x20    /* Detect 1->0 transition of CTS           */
+/* Modem Change Register (R/W) */
+#define MCR_DSRCHG      0x80    /* DSR Changed                             */
+#define MCR_CDCHG       0x40    /* CD Changed                              */
+#define MCR_CTSCHG      0x20    /* CTS Changed                             */
+/* Modem Signal Value Register (R/W) */
+#define MSVR_DSR        0x80    /* Current state of DSR input              */
+#define MSVR_CD         0x40    /* Current state of CD input               */
+#define MSVR_CTS        0x20    /* Current state of CTS input              */
+#define MSVR_DTR        0x02    /* Current state of DTR output             */
+#define MSVR_RTS        0x01    /* Current state of RTS output             */
+/* Escape characters */
+#define CD186x_C_ESC     0x00    /* Escape character                        */
+#define CD186x_C_SBRK    0x81    /* Start sending BREAK                     */
+#define CD186x_C_DELAY   0x82    /* Delay output                            */
+#define CD186x_C_EBRK    0x83    /* Stop sending BREAK                      */
+#define SRSR_RREQint     0x10    /* This chip wants "rec" serviced          */
+#define SRSR_TREQint     0x04    /* This chip wants "transmit" serviced     */
+#define SRSR_MREQint     0x01    /* This chip wants "mdm change" serviced   */
+#define SRCR_PKGTYPE    0x80
+#define SRCR_REGACKEN   0x40
+#define SRCR_DAISYEN    0x20
+#define SRCR_GLOBPRI    0x10
+#define SRCR_UNFAIR     0x08
+#define SRCR_AUTOPRI    0x02
+#define SRCR_PRISEL     0x01

diff --git a/drivers/char/cd1865.h b/drivers/char/cd1865.h new file mode 100644 index 000000000000..9940966e7a1d --- /dev/null +++ b/drivers/char/cd1865.h
@@ -0,0 +1,263 @@
	1	/*
	2	* linux/drivers/char/cd1865.h -- Definitions relating to the CD1865
	3	* for the Specialix IO8+ multiport serial driver.
	4	*
	5	* Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
	6	* Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
	7	*
	8	* Specialix pays for the development and support of this driver.
	9	* Please DO contact io8-linux@specialix.co.uk if you require
	10	* support.
	11	*
	12	* This driver was developped in the BitWizard linux device
	13	* driver service. If you require a linux device driver for your
	14	* product, please contact devices@BitWizard.nl for a quote.
	15	*
	16	*/
	17
	18	/*
	19	* Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards.
	20	*/
	21
	22
	23	/* Values of choice for Interrupt ACKs */
	24	/* These values are "obligatory" if you use the register based
	25	* interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865
	26	* databook */
	27	#define SX_ACK_MINT 0x75 /* goes to PILR1 */
	28	#define SX_ACK_TINT 0x76 /* goes to PILR2 */
	29	#define SX_ACK_RINT 0x77 /* goes to PILR3 */
	30
	31	/* Chip ID (is used when chips ar daisy chained.) */
	32	#define SX_ID 0x10
	33
	34	/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */
	35
	36	#define CD186x_NCH 8 /* Total number of channels */
	37	#define CD186x_TPC 16 /* Ticks per character */
	38	#define CD186x_NFIFO 8 /* TX FIFO size */
	39
	40
	41	/* Global registers */
	42
	43	#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */
	44	#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */
	45	#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */
	46	#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */
	47	#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */
	48	#define CD186x_CAR 0x64 /* Channel Access Register */
	49	#define CD186x_SRSR 0x65 /* Channel Access Register */
	50	#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */
	51	#define CD186x_PPRH 0x70 /* Prescaler Period Register High */
	52	#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */
	53	#define CD186x_RDR 0x78 /* Receiver Data Register */
	54	#define CD186x_RCSR 0x7a /* Receiver Character Status Register */
	55	#define CD186x_TDR 0x7b /* Transmit Data Register */
	56	#define CD186x_EOIR 0x7f /* End of Interrupt Register */
	57	#define CD186x_MRAR 0x75 /* Modem Request Acknowledge register */
	58	#define CD186x_TRAR 0x76 /* Transmit Request Acknowledge register */
	59	#define CD186x_RRAR 0x77 /* Receive Request Acknowledge register */
	60	#define CD186x_SRCR 0x66 /* Service Request Configuration register */
	61
	62	/* Channel Registers */
	63
	64	#define CD186x_CCR 0x01 /* Channel Command Register */
	65	#define CD186x_IER 0x02 /* Interrupt Enable Register */
	66	#define CD186x_COR1 0x03 /* Channel Option Register 1 */
	67	#define CD186x_COR2 0x04 /* Channel Option Register 2 */
	68	#define CD186x_COR3 0x05 /* Channel Option Register 3 */
	69	#define CD186x_CCSR 0x06 /* Channel Control Status Register */
	70	#define CD186x_RDCR 0x07 /* Receive Data Count Register */
	71	#define CD186x_SCHR1 0x09 /* Special Character Register 1 */
	72	#define CD186x_SCHR2 0x0a /* Special Character Register 2 */
	73	#define CD186x_SCHR3 0x0b /* Special Character Register 3 */
	74	#define CD186x_SCHR4 0x0c /* Special Character Register 4 */
	75	#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */
	76	#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */
	77	#define CD186x_MCR 0x12 /* Modem Change Register */
	78	#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */
	79	#define CD186x_MSVR 0x28 /* Modem Signal Value Register */
	80	#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */
	81	#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */
	82	#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */
	83	#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */
	84	#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */
	85	#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */
	86
	87
	88	/* Global Interrupt Vector Register (R/W) */
	89
	90	#define GIVR_ITMASK 0x07 /* Interrupt type mask */
	91	#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */
	92	#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */
	93	#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */
	94	#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */
	95
	96
	97	/* Global Interrupt Channel Register (R/W) */
	98
	99	#define GICR_CHAN 0x1c /* Channel Number Mask */
	100	#define GICR_CHAN_OFF 2 /* Channel Number shift */
	101
	102
	103	/* Channel Address Register (R/W) */
	104
	105	#define CAR_CHAN 0x07 /* Channel Number Mask */
	106	#define CAR_A7 0x08 /* A7 Address Extension (unused) */
	107
	108
	109	/* Receive Character Status Register (R/O) */
	110
	111	#define RCSR_TOUT 0x80 /* Rx Timeout */
	112	#define RCSR_SCDET 0x70 /* Special Character Detected Mask */
	113	#define RCSR_NO_SC 0x00 /* No Special Characters Detected */
	114	#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */
	115	#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */
	116	#define RCSR_SC_3 0x30 /* Special Char 3 Detected */
	117	#define RCSR_SC_4 0x40 /* Special Char 4 Detected */
	118	#define RCSR_BREAK 0x08 /* Break has been detected */
	119	#define RCSR_PE 0x04 /* Parity Error */
	120	#define RCSR_FE 0x02 /* Frame Error */
	121	#define RCSR_OE 0x01 /* Overrun Error */
	122
	123
	124	/* Channel Command Register (R/W) (commands in groups can be OR-ed) */
	125
	126	#define CCR_HARDRESET 0x81 /* Reset the chip */
	127
	128	#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */
	129
	130	#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */
	131	#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */
	132	#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */
	133
	134	#define CCR_SSCH1 0x21 /* Send Special Character 1 */
	135
	136	#define CCR_SSCH2 0x22 /* Send Special Character 2 */
	137
	138	#define CCR_SSCH3 0x23 /* Send Special Character 3 */
	139
	140	#define CCR_SSCH4 0x24 /* Send Special Character 4 */
	141
	142	#define CCR_TXEN 0x18 /* Enable Transmitter */
	143	#define CCR_RXEN 0x12 /* Enable Receiver */
	144
	145	#define CCR_TXDIS 0x14 /* Disable Transmitter */
	146	#define CCR_RXDIS 0x11 /* Disable Receiver */
	147
	148
	149	/* Interrupt Enable Register (R/W) */
	150
	151	#define IER_DSR 0x80 /* Enable interrupt on DSR change */
	152	#define IER_CD 0x40 /* Enable interrupt on CD change */
	153	#define IER_CTS 0x20 /* Enable interrupt on CTS change */
	154	#define IER_RXD 0x10 /* Enable interrupt on Receive Data */
	155	#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */
	156	#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */
	157	#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */
	158	#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */
	159
	160
	161	/* Channel Option Register 1 (R/W) */
	162
	163	#define COR1_ODDP 0x80 /* Odd Parity */
	164	#define COR1_PARMODE 0x60 /* Parity Mode mask */
	165	#define COR1_NOPAR 0x00 /* No Parity */
	166	#define COR1_FORCEPAR 0x20 /* Force Parity */
	167	#define COR1_NORMPAR 0x40 /* Normal Parity */
	168	#define COR1_IGNORE 0x10 /* Ignore Parity on RX */
	169	#define COR1_STOPBITS 0x0c /* Number of Stop Bits */
	170	#define COR1_1SB 0x00 /* 1 Stop Bit */
	171	#define COR1_15SB 0x04 /* 1.5 Stop Bits */
	172	#define COR1_2SB 0x08 /* 2 Stop Bits */
	173	#define COR1_CHARLEN 0x03 /* Character Length */
	174	#define COR1_5BITS 0x00 /* 5 bits */
	175	#define COR1_6BITS 0x01 /* 6 bits */
	176	#define COR1_7BITS 0x02 /* 7 bits */
	177	#define COR1_8BITS 0x03 /* 8 bits */
	178
	179
	180	/* Channel Option Register 2 (R/W) */
	181
	182	#define COR2_IXM 0x80 /* Implied XON mode */
	183	#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */
	184	#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */
	185	#define COR2_LLM 0x10 /* Local Loopback Mode */
	186	#define COR2_RLM 0x08 /* Remote Loopback Mode */
	187	#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */
	188	#define COR2_CTSAE 0x02 /* CTS Automatic Enable */
	189	#define COR2_DSRAE 0x01 /* DSR Automatic Enable */
	190
	191
	192	/* Channel Option Register 3 (R/W) */
	193
	194	#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */
	195	#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */
	196	#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */
	197	#define COR3_SCDE 0x10 /* Special Character Detection Enable */
	198	#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */
	199
	200
	201	/* Channel Control Status Register (R/O) */
	202
	203	#define CCSR_RXEN 0x80 /* Receiver Enabled */
	204	#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */
	205	#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */
	206	#define CCSR_TXEN 0x08 /* Transmitter Enabled */
	207	#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */
	208	#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */
	209
	210
	211	/* Modem Change Option Register 1 (R/W) */
	212
	213	#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */
	214	#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */
	215	#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */
	216	#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */
	217	#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */
	218
	219
	220	/* Modem Change Option Register 2 (R/W) */
	221
	222	#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */
	223	#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */
	224	#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */
	225
	226	/* Modem Change Register (R/W) */
	227
	228	#define MCR_DSRCHG 0x80 /* DSR Changed */
	229	#define MCR_CDCHG 0x40 /* CD Changed */
	230	#define MCR_CTSCHG 0x20 /* CTS Changed */
	231
	232
	233	/* Modem Signal Value Register (R/W) */
	234
	235	#define MSVR_DSR 0x80 /* Current state of DSR input */
	236	#define MSVR_CD 0x40 /* Current state of CD input */
	237	#define MSVR_CTS 0x20 /* Current state of CTS input */
	238	#define MSVR_DTR 0x02 /* Current state of DTR output */
	239	#define MSVR_RTS 0x01 /* Current state of RTS output */
	240
	241
	242	/* Escape characters */
	243
	244	#define CD186x_C_ESC 0x00 /* Escape character */
	245	#define CD186x_C_SBRK 0x81 /* Start sending BREAK */
	246	#define CD186x_C_DELAY 0x82 /* Delay output */
	247	#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */
	248
	249	#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */
	250	#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */
	251	#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */
	252
	253
	254
	255	#define SRCR_PKGTYPE 0x80
	256	#define SRCR_REGACKEN 0x40
	257	#define SRCR_DAISYEN 0x20
	258	#define SRCR_GLOBPRI 0x10
	259	#define SRCR_UNFAIR 0x08
	260	#define SRCR_AUTOPRI 0x02
	261	#define SRCR_PRISEL 0x01
	262
	263