1 files changed, 162 insertions, 0 deletions
diff --git a/drivers/cdrom/aztcd.h b/drivers/cdrom/aztcd.h
new file mode 100644
index 000000000000..057501e31628
--- /dev/null
+++ b/drivers/cdrom/aztcd.h
@@ -0,0 +1,162 @@
+/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
+ *
+ * Definitions for a AztechCD268 CD-ROM interface
+ *      Copyright (C) 1994-98  Werner Zimmermann
+ *
+ *      based on Mitsumi CDROM driver by Martin Harriss
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:    W.Zimmermann adaption to Aztech CD268-01A Version 1.3
+ *              October 1994 Email: Werner.Zimmermann@fht-esslingen.de
+ */
+/* *** change this to set the I/O port address of your CD-ROM drive,
+       set to '-1', if you want autoprobing */
+#define AZT_BASE_ADDR           -1
+/* list of autoprobing addresses (not more than 15), last value must be 0x000
+   Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
+#define AZT_BASE_AUTO           { 0x320, 0x300, 0x310, 0x330, 0x000 }
+/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
+   and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
+/*#define AZT_SW32 1
+*/
+#ifdef AZT_SW32 
+#define AZT_SW32_BASE_ADDR      0x220  /*I/O port base address of your soundcard*/
+#endif
+/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray 
+   from locking */
+#define AZT_ALLOW_TRAY_LOCK     1
+/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you 
+  don't want the auto-eject feature*/
+#define AZT_AUTO_EJECT          0
+/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
+  cooked mode */
+#define AZT_PRIVATE_IOCTLS      1
+/*Set this to 1, if you want multisession support by the ISO fs. Even if you set 
+  this value to '0' you can use multisession CDs. In that case the drive's firm-
+  ware will do the appropriate redirection automatically. The CD will then look
+  like a single session CD (but nevertheless all data may be read). Please read 
+  chapter '5.1 Multisession support' in README.aztcd for details. Normally it's 
+  uncritical to leave this setting untouched */
+#define AZT_MULTISESSION        1
+/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */
+/*#define AZT_KERNEL_PRIOR_2_1 */
+/*---------------------------------------------------------------------------*/
+/*-----nothing to be configured for normal applications below this line------*/
+/* Increase this if you get lots of timeouts; if you get kernel panic, replace
+   STEN_LOW_WAIT by STEN_LOW in the source code */
+#define AZT_STATUS_DELAY        400       /*for timer wait, STEN_LOW_WAIT*/
+#define AZT_TIMEOUT             8000000   /*for busy wait STEN_LOW, DTEN_LOW*/
+#define AZT_FAST_TIMEOUT        10000     /*for reading the version string*/
+/* number of times to retry a command before giving up */
+#define AZT_RETRY_ATTEMPTS      3
+/* port access macros */
+#define CMD_PORT                azt_port
+#define DATA_PORT               azt_port
+#define STATUS_PORT             azt_port+1
+#define MODE_PORT               azt_port+2
+#ifdef  AZT_SW32                
+ #define AZT_SW32_INIT          (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
+ #define AZT_SW32_CONFIG_REG    AZT_SW32_BASE_ADDR+0x16  /*Soundwave32 Config. Register*/
+ #define AZT_SW32_ID_REG        AZT_SW32_BASE_ADDR+0x04  /*Soundwave32 ID Version Register*/
+#endif
+/* status bits */
+#define AST_CMD_CHECK           0x80            /* 1 = command error */
+#define AST_DOOR_OPEN           0x40            /* 1 = door is open */
+#define AST_NOT_READY           0x20            /* 1 = no disk in the drive */
+#define AST_DSK_CHG             0x02            /* 1 = disk removed or changed */
+#define AST_MODE                0x01            /* 0=MODE1, 1=MODE2 */
+#define AST_MODE_BITS           0x1C            /* Mode Bits */
+#define AST_INITIAL             0x0C            /* initial, only valid ... */
+#define AST_BUSY                0x04            /* now playing, only valid
+                                                   in combination with mode
+                                                   bits */
+/* flag bits */
+#define AFL_DATA                0x02            /* data available if low */
+#define AFL_STATUS              0x04            /* status available if low */
+#define AFL_OP_OK               0x01            /* OP_OK command correct*/
+#define AFL_PA_OK               0x02            /* PA_OK parameter correct*/
+#define AFL_OP_ERR              0x05            /* error in command*/
+#define AFL_PA_ERR              0x06            /* error in parameters*/
+#define POLLED                  0x04            /* polled mode */
+/* commands */
+#define ACMD_SOFT_RESET         0x10            /* reset drive */
+#define ACMD_PLAY_READ          0x20            /* read data track in cooked mode */
+#define ACMD_PLAY_READ_RAW      0x21            /* reading in raw mode*/
+#define ACMD_SEEK               0x30            /* seek msf address*/
+#define ACMD_SEEK_TO_LEADIN     0x31            /* seek to leadin track*/
+#define ACMD_GET_ERROR          0x40            /* get error code */
+#define ACMD_GET_STATUS         0x41            /* get status */
+#define ACMD_GET_Q_CHANNEL      0x50            /* read info from q channel */
+#define ACMD_EJECT              0x60            /* eject/open tray */
+#define ACMD_CLOSE              0x61            /* close tray */
+#define ACMD_LOCK               0x71            /* lock tray closed */
+#define ACMD_UNLOCK             0x72            /* unlock tray */
+#define ACMD_PAUSE              0x80            /* pause */
+#define ACMD_STOP               0x81            /* stop play */
+#define ACMD_PLAY_AUDIO         0x90            /* play audio track */
+#define ACMD_SET_VOLUME         0x93            /* set audio level */
+#define ACMD_GET_VERSION        0xA0            /* get firmware version */
+#define ACMD_SET_DISK_TYPE      0xA1            /* set disk data mode */
+#define MAX_TRACKS              104
+struct msf {
+        unsigned char   min;
+        unsigned char   sec;
+        unsigned char   frame;
+};
+struct azt_Play_msf {
+        struct msf      start;
+        struct msf      end;
+};
+struct azt_DiskInfo {
+        unsigned char   first;
+        unsigned char   next;
+        unsigned char   last;
+        struct msf      diskLength;
+        struct msf      firstTrack;
+        unsigned char   multi;
+        struct msf      nextSession;
+        struct msf      lastSession;
+        unsigned char   xa;
+        unsigned char   audio;
+};
+struct azt_Toc {
+        unsigned char   ctrl_addr;
+        unsigned char   track;
+        unsigned char   pointIndex;
+        struct msf      trackTime;
+        struct msf      diskTime;
+};

diff --git a/drivers/cdrom/aztcd.h b/drivers/cdrom/aztcd.h new file mode 100644 index 000000000000..057501e31628 --- /dev/null +++ b/drivers/cdrom/aztcd.h
@@ -0,0 +1,162 @@
	1	/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
	2	*
	3	* Definitions for a AztechCD268 CD-ROM interface
	4	* Copyright (C) 1994-98 Werner Zimmermann
	5	*
	6	* based on Mitsumi CDROM driver by Martin Harriss
	7	*
	8	* This program is free software; you can redistribute it and/or modify
	9	* it under the terms of the GNU General Public License as published by
	10	* the Free Software Foundation; either version 2 of the License, or
	11	* (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	21	*
	22	* History: W.Zimmermann adaption to Aztech CD268-01A Version 1.3
	23	* October 1994 Email: Werner.Zimmermann@fht-esslingen.de
	24	*/
	25
	26	/* *** change this to set the I/O port address of your CD-ROM drive,
	27	set to '-1', if you want autoprobing */
	28	#define AZT_BASE_ADDR -1
	29
	30	/* list of autoprobing addresses (not more than 15), last value must be 0x000
	31	Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
	32	#define AZT_BASE_AUTO { 0x320, 0x300, 0x310, 0x330, 0x000 }
	33
	34	/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
	35	and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
	36	/*#define AZT_SW32 1
	37	*/
	38
	39	#ifdef AZT_SW32
	40	#define AZT_SW32_BASE_ADDR 0x220 /I/O port base address of your soundcard/
	41	#endif
	42
	43	/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray
	44	from locking */
	45	#define AZT_ALLOW_TRAY_LOCK 1
	46
	47	/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you
	48	don't want the auto-eject feature*/
	49	#define AZT_AUTO_EJECT 0
	50
	51	/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
	52	cooked mode */
	53	#define AZT_PRIVATE_IOCTLS 1
	54
	55	/*Set this to 1, if you want multisession support by the ISO fs. Even if you set
	56	this value to '0' you can use multisession CDs. In that case the drive's firm-
	57	ware will do the appropriate redirection automatically. The CD will then look
	58	like a single session CD (but nevertheless all data may be read). Please read
	59	chapter '5.1 Multisession support' in README.aztcd for details. Normally it's
	60	uncritical to leave this setting untouched */
	61	#define AZT_MULTISESSION 1
	62
	63	/Uncomment this, if you are using a linux kernel version prior to 2.1.0 /
	64	/#define AZT_KERNEL_PRIOR_2_1 /
	65
	66	/---------------------------------------------------------------------------/
	67	/-----nothing to be configured for normal applications below this line------/
	68
	69
	70	/* Increase this if you get lots of timeouts; if you get kernel panic, replace
	71	STEN_LOW_WAIT by STEN_LOW in the source code */
	72	#define AZT_STATUS_DELAY 400 /for timer wait, STEN_LOW_WAIT/
	73	#define AZT_TIMEOUT 8000000 /for busy wait STEN_LOW, DTEN_LOW/
	74	#define AZT_FAST_TIMEOUT 10000 /for reading the version string/
	75
	76	/* number of times to retry a command before giving up */
	77	#define AZT_RETRY_ATTEMPTS 3
	78
	79	/* port access macros */
	80	#define CMD_PORT azt_port
	81	#define DATA_PORT azt_port
	82	#define STATUS_PORT azt_port+1
	83	#define MODE_PORT azt_port+2
	84	#ifdef AZT_SW32
	85	#define AZT_SW32_INIT (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
	86	#define AZT_SW32_CONFIG_REG AZT_SW32_BASE_ADDR+0x16 /Soundwave32 Config. Register/
	87	#define AZT_SW32_ID_REG AZT_SW32_BASE_ADDR+0x04 /Soundwave32 ID Version Register/
	88	#endif
	89
	90	/* status bits */
	91	#define AST_CMD_CHECK 0x80 /* 1 = command error */
	92	#define AST_DOOR_OPEN 0x40 /* 1 = door is open */
	93	#define AST_NOT_READY 0x20 /* 1 = no disk in the drive */
	94	#define AST_DSK_CHG 0x02 /* 1 = disk removed or changed */
	95	#define AST_MODE 0x01 /* 0=MODE1, 1=MODE2 */
	96	#define AST_MODE_BITS 0x1C /* Mode Bits */
	97	#define AST_INITIAL 0x0C /* initial, only valid ... */
	98	#define AST_BUSY 0x04 /* now playing, only valid
	99	in combination with mode
	100	bits */
	101	/* flag bits */
	102	#define AFL_DATA 0x02 /* data available if low */
	103	#define AFL_STATUS 0x04 /* status available if low */
	104	#define AFL_OP_OK 0x01 /* OP_OK command correct*/
	105	#define AFL_PA_OK 0x02 /* PA_OK parameter correct*/
	106	#define AFL_OP_ERR 0x05 /* error in command*/
	107	#define AFL_PA_ERR 0x06 /* error in parameters*/
	108	#define POLLED 0x04 /* polled mode */
	109
	110	/* commands */
	111	#define ACMD_SOFT_RESET 0x10 /* reset drive */
	112	#define ACMD_PLAY_READ 0x20 /* read data track in cooked mode */
	113	#define ACMD_PLAY_READ_RAW 0x21 /* reading in raw mode*/
	114	#define ACMD_SEEK 0x30 /* seek msf address*/
	115	#define ACMD_SEEK_TO_LEADIN 0x31 /* seek to leadin track*/
	116	#define ACMD_GET_ERROR 0x40 /* get error code */
	117	#define ACMD_GET_STATUS 0x41 /* get status */
	118	#define ACMD_GET_Q_CHANNEL 0x50 /* read info from q channel */
	119	#define ACMD_EJECT 0x60 /* eject/open tray */
	120	#define ACMD_CLOSE 0x61 /* close tray */
	121	#define ACMD_LOCK 0x71 /* lock tray closed */
	122	#define ACMD_UNLOCK 0x72 /* unlock tray */
	123	#define ACMD_PAUSE 0x80 /* pause */
	124	#define ACMD_STOP 0x81 /* stop play */
	125	#define ACMD_PLAY_AUDIO 0x90 /* play audio track */
	126	#define ACMD_SET_VOLUME 0x93 /* set audio level */
	127	#define ACMD_GET_VERSION 0xA0 /* get firmware version */
	128	#define ACMD_SET_DISK_TYPE 0xA1 /* set disk data mode */
	129
	130	#define MAX_TRACKS 104
	131
	132	struct msf {
	133	unsigned char min;
	134	unsigned char sec;
	135	unsigned char frame;
	136	};
	137
	138	struct azt_Play_msf {
	139	struct msf start;
	140	struct msf end;
	141	};
	142
	143	struct azt_DiskInfo {
	144	unsigned char first;
	145	unsigned char next;
	146	unsigned char last;
	147	struct msf diskLength;
	148	struct msf firstTrack;
	149	unsigned char multi;
	150	struct msf nextSession;
	151	struct msf lastSession;
	152	unsigned char xa;
	153	unsigned char audio;
	154	};
	155
	156	struct azt_Toc {
	157	unsigned char ctrl_addr;
	158	unsigned char track;
	159	unsigned char pointIndex;
	160	struct msf trackTime;
	161	struct msf diskTime;
	162	};