1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 41dadacd3d15..e6acaba1e45c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -31,6 +31,30 @@
 
 #define VERSION "1.0"
 
+#define ATH3K_DNLOAD                            0x01
+#define ATH3K_GETSTATE                          0x05
+#define ATH3K_SET_NORMAL_MODE                   0x07
+#define ATH3K_GETVERSION                        0x09
+#define USB_REG_SWITCH_VID_PID                  0x0a
+
+#define ATH3K_MODE_MASK                         0x3F
+#define ATH3K_NORMAL_MODE                       0x0E
+
+#define ATH3K_PATCH_UPDATE                      0x80
+#define ATH3K_SYSCFG_UPDATE                     0x40
+
+#define ATH3K_XTAL_FREQ_26M                     0x00
+#define ATH3K_XTAL_FREQ_40M                     0x01
+#define ATH3K_XTAL_FREQ_19P2                    0x02
+#define ATH3K_NAME_LEN                          0xFF
+
+struct ath3k_version {
+        unsigned int    rom_version;
+        unsigned int    build_version;
+        unsigned int    ram_version;
+        unsigned char   ref_clock;
+        unsigned char   reserved[0x07];
+};
 
 static struct usb_device_id ath3k_table[] = {
         /* Atheros AR3011 */
@@ -41,13 +65,29 @@ static struct usb_device_id ath3k_table[] = {
 
         /* Atheros AR9285 Malbec with sflash firmware */
         { USB_DEVICE(0x03F0, 0x311D) },
+
+        /* Atheros AR3012 with sflash firmware*/
+        { USB_DEVICE(0x0CF3, 0x3004) },
+
         { }     /* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, ath3k_table);
 
+#define BTUSB_ATH3012           0x80
+/* This table is to load patch and sysconfig files
+ * for AR3012 */
+static struct usb_device_id ath3k_blist_tbl[] = {
+
+        /* Atheros AR3012 with sflash firmware*/
+        { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+
+        { }     /* Terminating entry */
+};
+
 #define USB_REQ_DFU_DNLOAD      1
 #define BULK_SIZE               4096
+#define FW_HDR_SIZE             20
 
 static int ath3k_load_firmware(struct usb_device *udev,
                                 const struct firmware *firmware)
@@ -103,6 +143,215 @@ error:
         return err;
 }
 
+static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
+{
+        int pipe = 0;
+
+        pipe = usb_rcvctrlpipe(udev, 0);
+        return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
+                        USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+                        state, 0x01, USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_get_version(struct usb_device *udev,
+                        struct ath3k_version *version)
+{
+        int pipe = 0;
+
+        pipe = usb_rcvctrlpipe(udev, 0);
+        return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
+                        USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
+                        sizeof(struct ath3k_version),
+                        USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_load_fwfile(struct usb_device *udev,
+                const struct firmware *firmware)
+{
+        u8 *send_buf;
+        int err, pipe, len, size, count, sent = 0;
+        int ret;
+
+        count = firmware->size;
+
+        send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+        if (!send_buf) {
+                BT_ERR("Can't allocate memory chunk for firmware");
+                return -ENOMEM;
+        }
+
+        size = min_t(uint, count, FW_HDR_SIZE);
+        memcpy(send_buf, firmware->data, size);
+
+        pipe = usb_sndctrlpipe(udev, 0);
+        ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
+                        USB_TYPE_VENDOR, 0, 0, send_buf,
+                        size, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0) {
+                BT_ERR("Can't change to loading configuration err");
+                kfree(send_buf);
+                return ret;
+        }
+
+        sent += size;
+        count -= size;
+
+        while (count) {
+                size = min_t(uint, count, BULK_SIZE);
+                pipe = usb_sndbulkpipe(udev, 0x02);
+
+                memcpy(send_buf, firmware->data + sent, size);
+
+                err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                        &len, 3000);
+                if (err || (len != size)) {
+                        BT_ERR("Error in firmware loading err = %d,"
+                                "len = %d, size = %d", err, len, size);
+                        kfree(send_buf);
+                        return err;
+                }
+                sent  += size;
+                count -= size;
+        }
+
+        kfree(send_buf);
+        return 0;
+}
+
+static int ath3k_switch_pid(struct usb_device *udev)
+{
+        int pipe = 0;
+
+        pipe = usb_sndctrlpipe(udev, 0);
+        return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
+                        USB_TYPE_VENDOR, 0, 0,
+                        NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_set_normal_mode(struct usb_device *udev)
+{
+        unsigned char fw_state;
+        int pipe = 0, ret;
+
+        ret = ath3k_get_state(udev, &fw_state);
+        if (ret < 0) {
+                BT_ERR("Can't get state to change to normal mode err");
+                return ret;
+        }
+
+        if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
+                BT_DBG("firmware was already in normal mode");
+                return 0;
+        }
+
+        pipe = usb_sndctrlpipe(udev, 0);
+        return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
+                        USB_TYPE_VENDOR, 0, 0,
+                        NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_load_patch(struct usb_device *udev)
+{
+        unsigned char fw_state;
+        char filename[ATH3K_NAME_LEN] = {0};
+        const struct firmware *firmware;
+        struct ath3k_version fw_version, pt_version;
+        int ret;
+
+        ret = ath3k_get_state(udev, &fw_state);
+        if (ret < 0) {
+                BT_ERR("Can't get state to change to load ram patch err");
+                return ret;
+        }
+
+        if (fw_state & ATH3K_PATCH_UPDATE) {
+                BT_DBG("Patch was already downloaded");
+                return 0;
+        }
+
+        ret = ath3k_get_version(udev, &fw_version);
+        if (ret < 0) {
+                BT_ERR("Can't get version to change to load ram patch err");
+                return ret;
+        }
+
+        snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
+                fw_version.rom_version);
+
+        ret = request_firmware(&firmware, filename, &udev->dev);
+        if (ret < 0) {
+                BT_ERR("Patch file not found %s", filename);
+                return ret;
+        }
+
+        pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
+        pt_version.build_version = *(int *)
+                (firmware->data + firmware->size - 4);
+
+        if ((pt_version.rom_version != fw_version.rom_version) ||
+                (pt_version.build_version <= fw_version.build_version)) {
+                BT_ERR("Patch file version did not match with firmware");
+                release_firmware(firmware);
+                return -EINVAL;
+        }
+
+        ret = ath3k_load_fwfile(udev, firmware);
+        release_firmware(firmware);
+
+        return ret;
+}
+
+static int ath3k_load_syscfg(struct usb_device *udev)
+{
+        unsigned char fw_state;
+        char filename[ATH3K_NAME_LEN] = {0};
+        const struct firmware *firmware;
+        struct ath3k_version fw_version;
+        int clk_value, ret;
+
+        ret = ath3k_get_state(udev, &fw_state);
+        if (ret < 0) {
+                BT_ERR("Can't get state to change to load configration err");
+                return -EBUSY;
+        }
+
+        ret = ath3k_get_version(udev, &fw_version);
+        if (ret < 0) {
+                BT_ERR("Can't get version to change to load ram patch err");
+                return ret;
+        }
+
+        switch (fw_version.ref_clock) {
+
+        case ATH3K_XTAL_FREQ_26M:
+                clk_value = 26;
+                break;
+        case ATH3K_XTAL_FREQ_40M:
+                clk_value = 40;
+                break;
+        case ATH3K_XTAL_FREQ_19P2:
+                clk_value = 19;
+                break;
+        default:
+                clk_value = 0;
+                break;
+        }
+
+        snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+                fw_version.rom_version, clk_value, ".dfu");
+
+        ret = request_firmware(&firmware, filename, &udev->dev);
+        if (ret < 0) {
+                BT_ERR("Configuration file not found %s", filename);
+                return ret;
+        }
+
+        ret = ath3k_load_fwfile(udev, firmware);
+        release_firmware(firmware);
+
+        return ret;
+}
+
 static int ath3k_probe(struct usb_interface *intf,
                         const struct usb_device_id *id)
 {
@@ -115,7 +364,37 @@ static int ath3k_probe(struct usb_interface *intf,
         if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
                 return -ENODEV;
 
+        /* match device ID in ath3k blacklist table */
+        if (!id->driver_info) {
+                const struct usb_device_id *match;
+                match = usb_match_id(intf, ath3k_blist_tbl);
+                if (match)
+                        id = match;
+        }
+
+        /* load patch and sysconfig files for AR3012 */
+        if (id->driver_info & BTUSB_ATH3012) {
+                ret = ath3k_load_patch(udev);
+                if (ret < 0) {
+                        BT_ERR("Loading patch file failed");
+                        return ret;
+                }
+                ret = ath3k_load_syscfg(udev);
+                if (ret < 0) {
+                        BT_ERR("Loading sysconfig file failed");
+                        return ret;
+                }
+                ret = ath3k_set_normal_mode(udev);
+                if (ret < 0) {
+                        BT_ERR("Set normal mode failed");
+                        return ret;
+                }
+                ath3k_switch_pid(udev);
+                return 0;
+        }
+
         if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
+                BT_ERR("Error loading firmware");
                 return -EIO;
         }