52 files changed, 423 insertions, 178 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index aeadd00411a1..a67b8e7c712d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -49,6 +49,17 @@
 #define DRV_NAME        "ahci"
 #define DRV_VERSION     "3.0"
 
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE              0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT           0x0000000f
+#define EM_MSG_LED_PMP_SLOT           0x0000ff00
+#define EM_MSG_LED_VALUE              0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
+#define EM_MSG_LED_VALUE_OFF          0xfff80000
+#define EM_MSG_LED_VALUE_ON           0x00010000
+
 static int ahci_skip_host_reset;
 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
@@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
         { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },        /* 6145 */
         { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },        /* 6121 */
 
+        /* Promise */
+        { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },   /* PDC42819 */
+
         /* Generic, PCI class code for AHCI */
         { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
           PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg)
         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
         unsigned long led_message = emp->led_state;
         u32 activity_led_state;
+        unsigned long flags;
 
-        led_message &= 0xffff0000;
+        led_message &= EM_MSG_LED_VALUE;
         led_message |= ap->port_no | (link->pmp << 8);
 
         /* check to see if we've had activity.  If so,
          * toggle state of LED and reset timer.  If not,
          * turn LED to desired idle state.
          */
+        spin_lock_irqsave(ap->lock, flags);
         if (emp->saved_activity != emp->activity) {
                 emp->saved_activity = emp->activity;
                 /* get the current LED state */
-                activity_led_state = led_message & 0x00010000;
+                activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
 
                 if (activity_led_state)
                         activity_led_state = 0;
@@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg)
                         activity_led_state = 1;
 
                 /* clear old state */
-                led_message &= 0xfff8ffff;
+                led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
 
                 /* toggle state */
                 led_message |= (activity_led_state << 16);
                 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
         } else {
                 /* switch to idle */
-                led_message &= 0xfff8ffff;
+                led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
                 if (emp->blink_policy == BLINK_OFF)
                         led_message |= (1 << 16);
         }
+        spin_unlock_irqrestore(ap->lock, flags);
         ahci_transmit_led_message(ap, led_message, 4);
 }
 
@@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
         struct ahci_em_priv *emp;
 
         /* get the slot number from the message */
-        pmp = (state & 0x0000ff00) >> 8;
+        pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
         if (pmp < MAX_SLOTS)
                 emp = &pp->em_priv[pmp];
         else
@@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
         message[0] |= (4 << 8);
 
         /* ignore 0:4 of byte zero, fill in port info yourself */
-        message[1] = ((state & 0xfffffff0) | ap->port_no);
+        message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
 
         /* write message to EM_LOC */
         writel(message[0], mmio + hpriv->em_loc);
@@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
         state = simple_strtoul(buf, NULL, 0);
 
         /* get the slot number from the message */
-        pmp = (state & 0x0000ff00) >> 8;
+        pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
         if (pmp < MAX_SLOTS)
                 emp = &pp->em_priv[pmp];
         else
@@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
          * activity led through em_message
          */
         if (emp->blink_policy)
-                state &= 0xfff8ffff;
+                state &= ~EM_MSG_LED_VALUE_ACTIVITY;
 
         return ahci_transmit_led_message(ap, state, size);
 }
@@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
                 link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
 
                 /* set the LED to OFF */
-                port_led_state &= 0xfff80000;
+                port_led_state &= EM_MSG_LED_VALUE_OFF;
                 port_led_state |= (ap->port_no | (link->pmp << 8));
                 ahci_transmit_led_message(ap, port_led_state, 4);
         } else {
                 link->flags |= ATA_LFLAG_SW_ACTIVITY;
                 if (val == BLINK_OFF) {
                         /* set LED to ON for idle */
-                        port_led_state &= 0xfff80000;
+                        port_led_state &= EM_MSG_LED_VALUE_OFF;
                         port_led_state |= (ap->port_no | (link->pmp << 8));
-                        port_led_state |= 0x00010000; /* check this */
+                        port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
                         ahci_transmit_led_message(ap, port_led_state, 4);
                 }
         }
@@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                 u32 em_loc = readl(mmio + HOST_EM_LOC);
                 u32 em_ctl = readl(mmio + HOST_EM_CTL);
 
-                messages = (em_ctl & 0x000f0000) >> 16;
+                messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
 
                 /* we only support LED message type right now */
                 if ((messages & 0x01) && (ahci_em_messages == 1)) {
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 75a406f5e694..5c33767e66de 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -1,6 +1,6 @@
 /*
  *  ata_generic.c - Generic PATA/SATA controller driver.
- *  Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *  Copyright 2005 Red Hat Inc, all rights reserved.
  *
  *  Elements from ide/pci/generic.c
  *          Copyright (C) 2001-2002     Andre Hedrick <andre@linux-ide.org>
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e9e32ed6b1a3..8e37be19bbf5 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -14,7 +14,7 @@
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *  Copyright (C) 2003 Red Hat Inc
  *
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -738,7 +738,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *      do_pata_set_dmamode - Initialize host controller PATA PIO timings
  *      @ap: Port whose timings we are configuring
  *      @adev: Drive in question
- *      @udma: udma mode, 0 - 6
  *      @isich: set if the chip is an ICH device
  *
  *      Set UDMA mode for device, in host controller PCI config space.
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8cb0b360bfd8..4214bfb13bbd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
                 if (tf->flags & ATA_TFLAG_LBA48) {
                         block |= (u64)tf->hob_lbah << 40;
                         block |= (u64)tf->hob_lbam << 32;
-                        block |= tf->hob_lbal << 24;
+                        block |= (u64)tf->hob_lbal << 24;
                 } else
                         block |= (tf->device & 0xf) << 24;
 
@@ -1268,7 +1268,7 @@ u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
 
         sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
         sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
-        sectors |= (tf->hob_lbal & 0xff) << 24;
+        sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
         sectors |= (tf->lbah & 0xff) << 16;
         sectors |= (tf->lbam & 0xff) << 8;
         sectors |= (tf->lbal & 0xff);
@@ -1602,7 +1602,6 @@ unsigned long ata_id_xfermask(const u16 *id)
 /**
  *      ata_pio_queue_task - Queue port_task
  *      @ap: The ata_port to queue port_task for
- *      @fn: workqueue function to be scheduled
  *      @data: data for @fn to use
  *      @delay: delay time in msecs for workqueue function
  *
@@ -1713,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
         else
                 tag = 0;
 
+        if (test_and_set_bit(tag, &ap->qc_allocated))
+                BUG();
         qc = __ata_qc_from_tag(ap, tag);
 
         qc->tag = tag;
@@ -2159,6 +2160,10 @@ retry:
 static inline u8 ata_dev_knobble(struct ata_device *dev)
 {
         struct ata_port *ap = dev->link->ap;
+
+        if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
+                return 0;
+
         return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
 }
 
@@ -4021,6 +4026,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 
         /* Weird ATAPI devices */
         { "TORiSAN DVD-ROM DRD-N216", NULL,     ATA_HORKAGE_MAX_SEC_128 },
+        { "QUANTUM DAT    DAT72-000", NULL,     ATA_HORKAGE_ATAPI_MOD16_DMA },
 
         /* Devices we expect to fail diagnostics */
 
@@ -4063,6 +4069,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         { "TSSTcorp CDDVDW SH-S202N", "SB00",     ATA_HORKAGE_IVB, },
         { "TSSTcorp CDDVDW SH-S202N", "SB01",     ATA_HORKAGE_IVB, },
 
+        /* Devices that do not need bridging limits applied */
+        { "MTRON MSP-SATA*",            NULL,   ATA_HORKAGE_BRIDGE_OK, },
+
         /* End Marker */
         { }
 };
@@ -4156,29 +4165,33 @@ static int cable_is_40wire(struct ata_port *ap)
         struct ata_link *link;
         struct ata_device *dev;
 
-        /* If the controller thinks we are 40 wire, we are */
+        /* If the controller thinks we are 40 wire, we are. */
         if (ap->cbl == ATA_CBL_PATA40)
                 return 1;
-        /* If the controller thinks we are 80 wire, we are */
+
+        /* If the controller thinks we are 80 wire, we are. */
         if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
                 return 0;
-        /* If the system is known to be 40 wire short cable (eg laptop),
-           then we allow 80 wire modes even if the drive isn't sure */
+
+        /* If the system is known to be 40 wire short cable (eg
+         * laptop), then we allow 80 wire modes even if the drive
+         * isn't sure.
+         */
         if (ap->cbl == ATA_CBL_PATA40_SHORT)
                 return 0;
-        /* If the controller doesn't know we scan
-
-           - Note: We look for all 40 wire detects at this point.
-             Any 80 wire detect is taken to be 80 wire cable
-             because
-             - In many setups only the one drive (slave if present)
-               will give a valid detect
-             - If you have a non detect capable drive you don't
-               want it to colour the choice
-        */
+
+        /* If the controller doesn't know, we scan.
+         *
+         * Note: We look for all 40 wire detects at this point.  Any
+         *       80 wire detect is taken to be 80 wire cable because
+         * - in many setups only the one drive (slave if present) will
+         *   give a valid detect
+         * - if you have a non detect capable drive you don't want it
+         *   to colour the choice
+         */
         ata_port_for_each_link(link, ap) {
                 ata_link_for_each_dev(dev, link) {
-                        if (!ata_is_40wire(dev))
+                        if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
                                 return 0;
                 }
         }
@@ -4434,7 +4447,8 @@ int atapi_check_dma(struct ata_queued_cmd *qc)
         /* Don't allow DMA if it isn't multiple of 16 bytes.  Quite a
          * few ATAPI devices choke on such DMA requests.
          */
-        if (unlikely(qc->nbytes & 15))
+        if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
+            unlikely(qc->nbytes & 15))
                 return 1;
 
         if (ap->ops->check_atapi_dma)
@@ -4551,27 +4565,55 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 }
 
 /**
- *      ata_qc_new_init - Request an available ATA command, and initialize it
+ *      ata_qc_new - Request an available ATA command, for queueing
+ *      @ap: Port associated with device @dev
  *      @dev: Device from whom we request an available command structure
  *
  *      LOCKING:
  *      None.
  */
 
-struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
+static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
 {
-        struct ata_port *ap = dev->link->ap;
-        struct ata_queued_cmd *qc;
+        struct ata_queued_cmd *qc = NULL;
+        unsigned int i;
 
+        /* no command while frozen */
         if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
                 return NULL;
 
-        qc = __ata_qc_from_tag(ap, tag);
+        /* the last tag is reserved for internal command. */
+        for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
+                if (!test_and_set_bit(i, &ap->qc_allocated)) {
+                        qc = __ata_qc_from_tag(ap, i);
+                        break;
+                }
+
+        if (qc)
+                qc->tag = i;
+
+        return qc;
+}
+
+/**
+ *      ata_qc_new_init - Request an available ATA command, and initialize it
+ *      @dev: Device from whom we request an available command structure
+ *      @tag: command tag
+ *
+ *      LOCKING:
+ *      None.
+ */
+
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
+{
+        struct ata_port *ap = dev->link->ap;
+        struct ata_queued_cmd *qc;
+
+        qc = ata_qc_new(ap);
         if (qc) {
                 qc->scsicmd = NULL;
                 qc->ap = ap;
                 qc->dev = dev;
-                qc->tag = tag;
 
                 ata_qc_reinit(qc);
         }
@@ -4579,6 +4621,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
         return qc;
 }
 
+/**
+ *      ata_qc_free - free unused ata_queued_cmd
+ *      @qc: Command to complete
+ *
+ *      Designed to free unused ata_queued_cmd object
+ *      in case something prevents using it.
+ *
+ *      LOCKING:
+ *      spin_lock_irqsave(host lock)
+ */
+void ata_qc_free(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        unsigned int tag;
+
+        WARN_ON(qc == NULL);    /* ata_qc_from_tag _might_ return NULL */
+
+        qc->flags = 0;
+        tag = qc->tag;
+        if (likely(ata_tag_valid(tag))) {
+                qc->tag = ATA_TAG_POISON;
+                clear_bit(tag, &ap->qc_allocated);
+        }
+}
+
 void __ata_qc_complete(struct ata_queued_cmd *qc)
 {
         struct ata_port *ap = qc->ap;
@@ -4643,7 +4710,6 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc)
 /**
  *      ata_qc_complete - Complete an active ATA command
  *      @qc: Command to complete
- *      @err_mask: ATA Status register contents
  *
  *      Indicate to the mid and upper layers that an ATA
  *      command has completed, with either an ok or not-ok status.
@@ -5924,7 +5990,7 @@ static void ata_port_detach(struct ata_port *ap)
          * to us.  Restore SControl and disable all existing devices.
          */
         __ata_port_for_each_link(link, ap) {
-                sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
+                sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
                 ata_link_for_each_dev(dev, link)
                         ata_dev_disable(dev);
         }
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5d687d7cffae..32da9a93ce44 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -603,13 +603,13 @@ void ata_scsi_error(struct Scsi_Host *host)
                         ata_link_for_each_dev(dev, link) {
                                 int devno = dev->devno;
 
+                                if (!ata_dev_enabled(dev))
+                                        continue;
+
                                 ehc->saved_xfer_mode[devno] = dev->xfer_mode;
                                 if (ata_ncq_enabled(dev))
                                         ehc->saved_ncq_enabled |= 1 << devno;
                         }
-
-                        /* set last reset timestamp to some time in the past */
-                        ehc->last_reset = jiffies - 60 * HZ;
                 }
 
                 ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
@@ -1161,6 +1161,7 @@ void ata_eh_detach_dev(struct ata_device *dev)
 {
         struct ata_link *link = dev->link;
         struct ata_port *ap = link->ap;
+        struct ata_eh_context *ehc = &link->eh_context;
         unsigned long flags;
 
         ata_dev_disable(dev);
@@ -1174,9 +1175,11 @@ void ata_eh_detach_dev(struct ata_device *dev)
                 ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
         }
 
-        /* clear per-dev EH actions */
+        /* clear per-dev EH info */
         ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK);
         ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK);
+        ehc->saved_xfer_mode[dev->devno] = 0;
+        ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
         spin_unlock_irqrestore(ap->lock, flags);
 }
@@ -2275,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify,
         if (link->flags & ATA_LFLAG_NO_SRST)
                 softreset = NULL;
 
-        now = jiffies;
-        deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
-        if (time_before(now, deadline))
-                schedule_timeout_uninterruptible(deadline - now);
+        /* make sure each reset attemp is at least COOL_DOWN apart */
+        if (ehc->i.flags & ATA_EHI_DID_RESET) {
+                now = jiffies;
+                WARN_ON(time_after(ehc->last_reset, now));
+                deadline = ata_deadline(ehc->last_reset,
+                                        ATA_EH_RESET_COOL_DOWN);
+                if (time_before(now, deadline))
+                        schedule_timeout_uninterruptible(deadline - now);
+        }
 
         spin_lock_irqsave(ap->lock, flags);
         ap->pflags |= ATA_PFLAG_RESETTING;
         spin_unlock_irqrestore(ap->lock, flags);
 
         ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
-        ehc->last_reset = jiffies;
 
         ata_link_for_each_dev(dev, link) {
                 /* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2373,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
         /*
          * Perform reset
          */
-        ehc->last_reset = jiffies;
         if (ata_is_host_link(link))
                 ata_eh_freeze_port(ap);
 
@@ -2385,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
                                         reset == softreset ? "soft" : "hard");
 
                 /* mark that this EH session started with reset */
+                ehc->last_reset = jiffies;
                 if (reset == hardreset)
                         ehc->i.flags |= ATA_EHI_DID_HARDRESET;
                 else
@@ -2529,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
         ata_eh_done(link, NULL, ATA_EH_RESET);
         if (slave)
                 ata_eh_done(slave, NULL, ATA_EH_RESET);
-        ehc->last_reset = jiffies;
+        ehc->last_reset = jiffies;      /* update to completion time */
         ehc->i.action |= ATA_EH_REVALIDATE;
 
         rc = 0;
@@ -2787,6 +2794,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
         /* if data transfer is verified, clear DUBIOUS_XFER on ering top */
         ata_link_for_each_dev(dev, link) {
+                if (!ata_dev_enabled(dev))
+                        continue;
+
                 if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
                         struct ata_ering_entry *ent;
 
@@ -2808,6 +2818,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
                 u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
                 u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
 
+                if (!ata_dev_enabled(dev))
+                        continue;
+
                 if (dev->xfer_mode != saved_xfer_mode ||
                     ata_ncq_enabled(dev) != saved_ncq)
                         dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 4b95c4387e9e..47c7afcb36f2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -190,7 +190,7 @@ static ssize_t ata_scsi_park_show(struct device *device,
         struct ata_port *ap;
         struct ata_link *link;
         struct ata_device *dev;
-        unsigned long flags;
+        unsigned long flags, now;
         unsigned int uninitialized_var(msecs);
         int rc = 0;
 
@@ -208,10 +208,11 @@ static ssize_t ata_scsi_park_show(struct device *device,
         }
 
         link = dev->link;
+        now = jiffies;
         if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS &&
             link->eh_context.unloaded_mask & (1 << dev->devno) &&
-            time_after(dev->unpark_deadline, jiffies))
-                msecs = jiffies_to_msecs(dev->unpark_deadline - jiffies);
+            time_after(dev->unpark_deadline, now))
+                msecs = jiffies_to_msecs(dev->unpark_deadline - now);
         else
                 msecs = 0;
 
@@ -708,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 {
         struct ata_queued_cmd *qc;
 
-        if (cmd->request->tag != -1)
-                qc = ata_qc_new_init(dev, cmd->request->tag);
-        else
-                qc = ata_qc_new_init(dev, 0);
-
+        qc = ata_qc_new_init(dev);
         if (qc) {
                 qc->scsicmd = cmd;
                 qc->scsidone = done;
@@ -1107,8 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
 
                 depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
                 depth = min(ATA_MAX_QUEUE - 1, depth);
-                scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
-                scsi_activate_tcq(sdev, depth);
+                scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
         }
 
         return 0;
@@ -1948,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
                 hdr[1] |= (1 << 7);
 
         memcpy(rbuf, hdr, sizeof(hdr));
-
-        /* if ncq, set tags supported */
-        if (ata_id_has_ncq(args->id))
-                rbuf[7] |= (1 << 1);
-
         memcpy(&rbuf[8], "ATA     ", 8);
         ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
         ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 4b4739486327..9033d164c4ec 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1227,10 +1227,19 @@ fsm_start:
                         /* ATA PIO protocol */
                         if (unlikely((status & ATA_DRQ) == 0)) {
                                 /* handle BSY=0, DRQ=0 as error */
-                                if (likely(status & (ATA_ERR | ATA_DF)))
+                                if (likely(status & (ATA_ERR | ATA_DF))) {
                                         /* device stops HSM for abort/error */
                                         qc->err_mask |= AC_ERR_DEV;
-                                else {
+
+                                        /* If diagnostic failed and this is
+                                         * IDENTIFY, it's likely a phantom
+                                         * device.  Mark hint.
+                                         */
+                                        if (qc->dev->horkage &
+                                            ATA_HORKAGE_DIAGNOSTIC)
+                                                qc->err_mask |=
+                                                        AC_ERR_NODEV_HINT;
+                                } else {
                                         /* HSM violation. Let EH handle this.
                                          * Phantom devices also trigger this
                                          * condition.  Mark hint.
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index d3831d39bdaa..fe2839e58774 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
 extern void ata_force_cbl(struct ata_port *ap);
 extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
 extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
-extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
+extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
                            u64 block, u32 n_block, unsigned int tf_flags,
                            unsigned int tag);
@@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_link *link);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
+extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
 extern int atapi_check_dma(struct ata_queued_cmd *qc);
@@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
 extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
-/**
- *      ata_qc_free - free unused ata_queued_cmd
- *      @qc: Command to complete
- *
- *      Designed to free unused ata_queued_cmd object
- *      in case something prevents using it.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-static inline void ata_qc_free(struct ata_queued_cmd *qc)
-{
-        qc->flags = 0;
-        qc->tag = ATA_TAG_POISON;
-}
-
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index eb919c16a03e..e2e332d8ff95 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -1,7 +1,7 @@
 /*
  *      ACPI PATA driver
  *
- *      (c) 2007 Red Hat  <alan@redhat.com>
+ *      (c) 2007 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 5ca70fa1f587..73c466e452ca 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -1,7 +1,6 @@
 /*
  * pata_ali.c   - ALI 15x3 PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * based in part upon
  * linux/drivers/ide/pci/alim15x3.c             Version 0.17    2003/01/02
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 57dd00f463d3..0ec9c7d9fe9d 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -1,7 +1,6 @@
 /*
  * pata_amd.c   - AMD PATA for new ATA layer
  *                        (C) 2005-2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  *  Based on pata-sil680. Errata information is taken from data sheets
  *  and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 0f513bc11193..6b3092c75ffe 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -1,7 +1,7 @@
 /*
  *    pata_artop.c - ARTOP ATA controller driver
  *
- *      (C) 2006 Red Hat <alan@redhat.com>
+ *      (C) 2006 Red Hat
  *      (C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based in part on drivers/ide/pci/aec62xx.c
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index e8a0d99d7356..0e2cde8f9973 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,7 +1,6 @@
 /*
  * pata_atiixp.c        - ATI PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * Based on
  *
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 2de30b990278..34a394264c3d 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -1,7 +1,6 @@
 /*
  * pata_cmd640.c        - CMD640 PCI PATA for new ATA layer
  *                        (C) 2007 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * Based upon
  *  linux/drivers/ide/pci/cmd640.c              Version 1.02  Sep 01, 1996
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index ddd09b7d98c9..3167d8fed2f2 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -1,7 +1,7 @@
 /*
  * pata_cmd64x.c        - CMD64x PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * Based upon
  * linux/drivers/ide/pci/cmd64x.c               Version 1.30    Sept 10, 2002
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 0c4b271a9d5a..bba453381f44 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -1,7 +1,6 @@
 /*
  * pata-cs5530.c        - CS5530 PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * based upon cs5530.c by Mark Lord.
  *
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index f1b6556f0483..8b236af84c2e 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -1,7 +1,7 @@
 /*
  * pata-cs5535.c        - CS5535 PATA for new ATA layer
  *                        (C) 2005-2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
  * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
@@ -72,7 +72,6 @@
 /**
  *      cs5535_cable_detect     -       detect cable type
  *      @ap: Port to detect on
- *      @deadline: deadline jiffies for the operation
  *
  *      Perform cable detection for ATA66 capable cable. Return a libata
  *      cable type.
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 73f8332cb679..afed92976198 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
 /**
  *      cs5536_cable_detect     -       detect cable type
  *      @ap: Port to detect on
- *      @deadline: deadline jiffies for the operation
  *
  *      Perform cable detection for ATA66 capable cable. Return a libata
  *      cable type.
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 2ff62608ae37..d546425cd380 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -1,7 +1,7 @@
 /*
  * pata_cypress.c       - Cypress PATA for new ATA layer
  *                        (C) 2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox
  *
  * Based heavily on
  * linux/drivers/ide/pci/cy82c693.c             Version 0.40    Sep. 10, 2002
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 9fba82976ba6..ac6392ea35b0 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -1,7 +1,7 @@
 /*
  *    pata_efar.c - EFAR PIIX clone controller driver
  *
- *      (C) 2005 Red Hat <alan@redhat.com>
+ *      (C) 2005 Red Hat
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 6a111baab523..15cdb9148aab 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -1,7 +1,7 @@
 
 /*
  *   pata-isapnp.c - ISA PnP PATA controller driver.
- *   Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005/2006 Red Hat Inc, all rights reserved.
  *
  *   Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru>
  */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 0221c9a46769..860ede526282 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -1,7 +1,7 @@
 /*
  * pata_it821x.c        - IT821x PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
  *                        (C) 2007 Bartlomiej Zolnierkiewicz
  *
  * based upon
@@ -10,7 +10,7 @@
  *
  * linux/drivers/ide/pci/it821x.c               Version 0.09    December 2004
  *
- * Copyright (C) 2004           Red Hat <alan@redhat.com>
+ * Copyright (C) 2004           Red Hat
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *  Based in part on the ITE vendor provided SCSI driver.
@@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev,
         if (strstr(model_num, "Integrated Technology Express")) {
                 /* Set feature bits the firmware neglects */
                 id[49] |= 0x0300;       /* LBA, DMA */
-                id[82] |= 0x0400;       /* LBA48 */
                 id[83] &= 0x7FFF;
-                id[83] |= 0x4000;       /* Word 83 is valid */
+                id[83] |= 0x4400;       /* Word 83 is valid and LBA48 */
                 id[86] |= 0x0400;       /* LBA48 on */
                 id[ATA_ID_MAJOR_VER] |= 0x1F;
         }
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 73b7596816b4..38cf1ab2d289 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -4,7 +4,7 @@
  *                      driven by AHCI in the usual configuration although
  *                      this driver can handle other setups if we need it.
  *
- *      (c) 2006 Red Hat  <alan@redhat.com>
+ *      (c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index bc037ffce200..930c2208640b 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -1,6 +1,6 @@
 /*
  *   pata-legacy.c - Legacy port PATA/SATA controller driver.
- *   Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005/2006 Red Hat, all rights reserved.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 0d87eec84966..76e399bf8c1b 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -5,7 +5,7 @@
  *      isn't making full use of the device functionality but it is
  *      easy to get working.
  *
- *      (c) 2006 Red Hat  <alan@redhat.com>
+ *      (c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 7d7e3fdab71f..7c8faa48b5f3 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -1,7 +1,7 @@
 /*
  * pata_mpiix.c         - Intel MPIIX PATA for new ATA layer
  *                        (C) 2005-2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * The MPIIX is different enough to the PIIX4 and friends that we give it
  * a separate driver. The old ide/pci code handles this by just not tuning
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index d9719c8b9dbe..9dc05e1656a8 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -1,7 +1,7 @@
 /*
  *    pata_netcell.c - Netcell PATA driver
  *
- *      (c) 2006 Red Hat  <alan@redhat.com>
+ *      (c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 565e67cd13fa..4e466eae8b46 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -1,7 +1,6 @@
 /*
  * pata_ninja32.c       - Ninja32 PATA for new ATA layer
  *                        (C) 2007 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * Note: The controller like many controllers has shared timings for
  * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
@@ -45,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.1.1"
 
 
 /**
@@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = {
         .set_piomode    = ninja32_set_piomode,
 };
 
+static void ninja32_program(void __iomem *base)
+{
+        iowrite8(0x05, base + 0x01);    /* Enable interrupt lines */
+        iowrite8(0xBE, base + 0x02);    /* Burst, ?? setup */
+        iowrite8(0x01, base + 0x03);    /* Unknown */
+        iowrite8(0x20, base + 0x04);    /* WAIT0 */
+        iowrite8(0x8f, base + 0x05);    /* Unknown */
+        iowrite8(0xa4, base + 0x1c);    /* Unknown */
+        iowrite8(0x83, base + 0x1d);    /* BMDMA control: WAIT0 */
+}
+
 static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
         struct ata_host *host;
@@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         ap->ioaddr.bmdma_addr = base;
         ata_sff_std_ports(&ap->ioaddr);
 
-        iowrite8(0x05, base + 0x01);    /* Enable interrupt lines */
-        iowrite8(0xBE, base + 0x02);    /* Burst, ?? setup */
-        iowrite8(0x01, base + 0x03);    /* Unknown */
-        iowrite8(0x20, base + 0x04);    /* WAIT0 */
-        iowrite8(0x8f, base + 0x05);    /* Unknown */
-        iowrite8(0xa4, base + 0x1c);    /* Unknown */
-        iowrite8(0x83, base + 0x1d);    /* BMDMA control: WAIT0 */
+        ninja32_program(base);
         /* FIXME: Should we disable them at remove ? */
         return ata_host_activate(host, dev->irq, ata_sff_interrupt,
                                  IRQF_SHARED, &ninja32_sht);
 }
 
+#ifdef CONFIG_PM
+
+static int ninja32_reinit_one(struct pci_dev *pdev)
+{
+        struct ata_host *host = dev_get_drvdata(&pdev->dev);
+        int rc;
+
+        rc = ata_pci_device_do_resume(pdev);
+        if (rc)
+                return rc;
+        ninja32_program(host->iomap[0]);
+        ata_host_resume(host);
+        return 0;                       
+}
+#endif
+
 static const struct pci_device_id ninja32[] = {
         { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
         { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = ninja32,
         .probe          = ninja32_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ninja32_reinit_one,
+#endif
 };
 
 static int __init ninja32_init(void)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index be756b7ef07e..40d411c460de 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -1,7 +1,6 @@
 /*
  * pata_ns87410.c       - National Semiconductor 87410 PATA for new ATA layer
  *                        (C) 2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index e0aa7eaaee0a..89bf5f865d6a 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -1,7 +1,7 @@
 /*
  *    pata_ns87415.c - NS87415 (non PARISC) PATA
  *
- *      (C) 2005 Red Hat <alan@redhat.com>
+ *      (C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk>
  *
  *    This is a fairly generic MWDMA controller. It has some limitations
  *    as it requires timing reloads on PIO/DMA transitions but it is otherwise
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index df64f2443001..c0dbc46a348e 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -1,7 +1,7 @@
 /*
  *    pata_oldpiix.c - Intel PATA/SATA controllers
  *
- *      (C) 2005 Red Hat <alan@redhat.com>
+ *      (C) 2005 Red Hat
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index fb2cf661b0e8..e4fa4d565e96 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -1,7 +1,6 @@
 /*
  * pata_opti.c  - ATI PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * Based on
  *  linux/drivers/ide/pci/opti621.c             Version 0.7     Sept 10, 2002
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 4cd744456313..93bb6e91973f 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -1,7 +1,6 @@
 /*
  * pata_optidma.c       - Opti DMA PATA for new ATA layer
  *                        (C) 2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  *      The Opti DMA controllers are related to the older PIO PCI controllers
  *      and indeed the VLB ones. The main differences are that the timing
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 02b596b9cf6a..64b2e2281ee7 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -1,6 +1,6 @@
 /*
  *   pata_pcmcia.c - PCMCIA PATA controller driver.
- *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
  *   PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
  *                                              <openembedded@hrw.one.pl>
  *
@@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
         PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
         PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
         PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+        PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
         PCMCIA_DEVICE_NULL,
 };
 
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index d2673060bc8d..799a6a098712 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -1,7 +1,7 @@
 /*
  * pata_pdc202xx_old.c  - Promise PDC202xx PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
  *                        (C) 2007 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 8f65ad61b8af..77e4e3b17f54 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -5,7 +5,7 @@
  *
  * Based on pata_pcmcia:
  *
- *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 63b7a1c165a5..3080f371222c 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -1,6 +1,6 @@
 /*
  *    pata_qdi.c - QDI VLB ATA controllers
- *      (C) 2006 Red Hat <alan@redhat.com>
+ *      (C) 2006 Red Hat
  *
  * This driver mostly exists as a proof of concept for non PCI devices under
  * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c0d9fa7ee54..0b0aa452de14 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -1,7 +1,7 @@
 /*
  *    pata_radisys.c - Intel PATA/SATA controllers
  *
- *      (C) 2006 Red Hat <alan@redhat.com>
+ *      (C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk>
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 0278fd2b8fb1..9a4bdca54616 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -1,5 +1,5 @@
 /*
- * New ATA layer SC1200 driver          Alan Cox <alan@redhat.com>
+ * New ATA layer SC1200 driver          Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * TODO: Mode selection filtering
  * TODO: Can't enable second channel until ATA core has serialize
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 16673d168573..cf3707e516a2 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -8,7 +8,7 @@
  *  Copyright 2003-2005 Jeff Garzik
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *  Copyright (C) 2003 Red Hat Inc
  *
  * and drivers/ata/ahci.c:
  *  Copyright 2004-2005 Red Hat, Inc.
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index c8cc027789fe..6aeeeeb34124 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = {
 };
 
 static struct ata_port_info sch_port_info = {
-        .flags          = 0,
+        .flags          = ATA_FLAG_SLAVE_POSS,
         .pio_mask       = ATA_PIO4,   /* pio0-4 */
         .mwdma_mask     = ATA_MWDMA2, /* mwdma0-2 */
         .udma_mask      = ATA_UDMA5,  /* udma0-5 */
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index ffd26d0dc50d..72e41c9f969b 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -1,7 +1,6 @@
 /*
  * pata_serverworks.c   - Serverworks PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index a598bb36aafc..83580a59db58 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -1,7 +1,6 @@
 /*
  * pata_sil680.c        - SIL680 PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 26345d7b531c..d34236611752 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -1,7 +1,7 @@
 /*
  *    pata_sis.c - SiS ATA driver
  *
- *      (C) 2005 Red Hat <alan@redhat.com>
+ *      (C) 2005 Red Hat
  *      (C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based upon linux/drivers/ide/pci/sis5513.c
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 69877bd81815..1b0e7b6d8ef5 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -1,7 +1,6 @@
 /*
  * pata_sl82c105.c      - SL82C105 PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  * Based in part on linux/drivers/ide/pci/sl82c105.c
  *              SL82C105/Winbond 553 IDE driver
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index b181261f2743..ef9597517cdd 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -1,7 +1,7 @@
 /*
  * pata_triflex.c       - Compaq PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
+ *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 8fdb2ce73210..681169c9c640 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -1,7 +1,6 @@
 /*
  * pata_via.c   - VIA PATA for new ATA layer
  *                        (C) 2005-2006 Red Hat Inc
- *                        Alan Cox <alan@redhat.com>
  *
  *  Documentation
  *      Most chipset documentation available under NDA only
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index a7606b044a61..319e164a3d74 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -1,6 +1,6 @@
 /*
  *    pata_winbond.c - Winbond VLB ATA controllers
- *      (C) 2006 Red Hat <alan@redhat.com>
+ *      (C) 2006 Red Hat
  *
  *    Support for the Winbond 83759A when operating in advanced mode.
  *    Multichip mode is not currently supported.
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index fae3841de0d8..6f1460614325 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -307,10 +307,10 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 
 static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
+static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
+                            unsigned long deadline);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-                        unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -405,17 +405,8 @@ static struct scsi_host_template nv_swncq_sht = {
         .slave_configure        = nv_swncq_slave_config,
 };
 
-/* OSDL bz3352 reports that some nv controllers can't determine device
- * signature reliably and nv_hardreset is implemented to work around
- * the problem.  This was reported on nf3 and it's unclear whether any
- * other controllers are affected.  However, the workaround has been
- * applied to all variants and there isn't much to gain by trying to
- * find out exactly which ones are affected at this point especially
- * because NV has moved over to ahci for newer controllers.
- */
 static struct ata_port_operations nv_common_ops = {
         .inherits               = &ata_bmdma_port_ops,
-        .hardreset              = nv_hardreset,
         .scr_read               = nv_scr_read,
         .scr_write              = nv_scr_write,
 };
@@ -429,12 +420,22 @@ static struct ata_port_operations nv_generic_ops = {
         .hardreset              = ATA_OP_NULL,
 };
 
+/* OSDL bz3352 reports that nf2/3 controllers can't determine device
+ * signature reliably.  Also, the following thread reports detection
+ * failure on cold boot with the standard debouncing timing.
+ *
+ * http://thread.gmane.org/gmane.linux.ide/34098
+ *
+ * Debounce with hotplug timing and request follow-up SRST.
+ */
 static struct ata_port_operations nv_nf2_ops = {
         .inherits               = &nv_common_ops,
         .freeze                 = nv_nf2_freeze,
         .thaw                   = nv_nf2_thaw,
+        .hardreset              = nv_nf2_hardreset,
 };
 
+/* CK804 finally gets hardreset right */
 static struct ata_port_operations nv_ck804_ops = {
         .inherits               = &nv_common_ops,
         .freeze                 = nv_ck804_freeze,
@@ -443,7 +444,7 @@ static struct ata_port_operations nv_ck804_ops = {
 };
 
 static struct ata_port_operations nv_adma_ops = {
-        .inherits               = &nv_common_ops,
+        .inherits               = &nv_ck804_ops,
 
         .check_atapi_dma        = nv_adma_check_atapi_dma,
         .sff_tf_read            = nv_adma_tf_read,
@@ -467,7 +468,7 @@ static struct ata_port_operations nv_adma_ops = {
 };
 
 static struct ata_port_operations nv_swncq_ops = {
-        .inherits               = &nv_common_ops,
+        .inherits               = &nv_generic_ops,
 
         .qc_defer               = ata_std_qc_defer,
         .qc_prep                = nv_swncq_qc_prep,
@@ -1553,6 +1554,17 @@ static void nv_nf2_thaw(struct ata_port *ap)
         iowrite8(mask, scr_addr + NV_INT_ENABLE);
 }
 
+static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
+                            unsigned long deadline)
+{
+        bool online;
+        int rc;
+
+        rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+                                 &online, NULL);
+        return online ? -EAGAIN : rc;
+}
+
 static void nv_ck804_freeze(struct ata_port *ap)
 {
         void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@@ -1605,21 +1617,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
         ata_sff_thaw(ap);
 }
 
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-                        unsigned long deadline)
-{
-        int rc;
-
-        /* SATA hardreset fails to retrieve proper device signature on
-         * some controllers.  Request follow up SRST.  For more info,
-         * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
-         */
-        rc = sata_sff_hardreset(link, class, deadline);
-        if (rc)
-                return rc;
-        return -EAGAIN;
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
         struct nv_adma_port_priv *pp = ap->private_data;
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 750d8cdc00cd..ba9a2570a742 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -153,6 +153,10 @@ static void pdc_freeze(struct ata_port *ap);
 static void pdc_sata_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
 static void pdc_sata_thaw(struct ata_port *ap);
+static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
+                              unsigned long deadline);
+static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
+                              unsigned long deadline);
 static void pdc_error_handler(struct ata_port *ap);
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
 static int pdc_pata_cable_detect(struct ata_port *ap);
@@ -186,6 +190,7 @@ static struct ata_port_operations pdc_sata_ops = {
         .scr_read               = pdc_sata_scr_read,
         .scr_write              = pdc_sata_scr_write,
         .port_start             = pdc_sata_port_start,
+        .hardreset              = pdc_sata_hardreset,
 };
 
 /* First-generation chips need a more restrictive ->check_atapi_dma op */
@@ -200,6 +205,7 @@ static struct ata_port_operations pdc_pata_ops = {
         .freeze                 = pdc_freeze,
         .thaw                   = pdc_thaw,
         .port_start             = pdc_common_port_start,
+        .softreset              = pdc_pata_softreset,
 };
 
 static const struct ata_port_info pdc_port_info[] = {
@@ -693,6 +699,20 @@ static void pdc_sata_thaw(struct ata_port *ap)
         readl(host_mmio + hotplug_offset); /* flush */
 }
 
+static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
+                              unsigned long deadline)
+{
+        pdc_reset_port(link->ap);
+        return ata_sff_softreset(link, class, deadline);
+}
+
+static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
+                              unsigned long deadline)
+{
+        pdc_reset_port(link->ap);
+        return sata_sff_hardreset(link, class, deadline);
+}
+
 static void pdc_error_handler(struct ata_port *ap)
 {
         if (!(ap->pflags & ATA_PFLAG_FROZEN))
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 4621807a1a6a..ccee930f1e12 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                 }
         }
 
+        /* Set max read request size to 4096.  This slightly increases
+         * write throughput for pci-e variants.
+         */
+        pcie_set_readrq(pdev, 4096);
+
         sil24_init_controller(host);
 
         pci_set_master(pdev);
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 5b72e734300a..c18935f0bda2 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -44,11 +44,16 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "sata_via"
-#define DRV_VERSION     "2.3"
+#define DRV_VERSION     "2.4"
 
+/*
+ * vt8251 is different from other sata controllers of VIA.  It has two
+ * channels, each channel has both Master and Slave slot.
+ */
 enum board_ids_enum {
         vt6420,
         vt6421,
+        vt8251,
 };
 
 enum {
@@ -70,6 +75,8 @@ enum {
 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val);
+static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val);
 static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
 static void svia_noop_freeze(struct ata_port *ap);
 static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
@@ -79,12 +86,12 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
 
 static const struct pci_device_id svia_pci_tbl[] = {
         { PCI_VDEVICE(VIA, 0x5337), vt6420 },
-        { PCI_VDEVICE(VIA, 0x0591), vt6420 },
-        { PCI_VDEVICE(VIA, 0x3149), vt6420 },
-        { PCI_VDEVICE(VIA, 0x3249), vt6421 },
-        { PCI_VDEVICE(VIA, 0x5287), vt6420 },
+        { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */
+        { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */
+        { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */
         { PCI_VDEVICE(VIA, 0x5372), vt6420 },
         { PCI_VDEVICE(VIA, 0x7372), vt6420 },
+        { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
 
         { }     /* terminate list */
 };
@@ -128,6 +135,13 @@ static struct ata_port_operations vt6421_sata_ops = {
         .scr_write              = svia_scr_write,
 };
 
+static struct ata_port_operations vt8251_ops = {
+        .inherits               = &svia_base_ops,
+        .hardreset              = sata_std_hardreset,
+        .scr_read               = vt8251_scr_read,
+        .scr_write              = vt8251_scr_write,
+};
+
 static const struct ata_port_info vt6420_port_info = {
         .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
         .pio_mask       = 0x1f,
@@ -152,6 +166,15 @@ static struct ata_port_info vt6421_pport_info = {
         .port_ops       = &vt6421_pata_ops,
 };
 
+static struct ata_port_info vt8251_port_info = {
+        .flags          = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS |
+                          ATA_FLAG_NO_LEGACY,
+        .pio_mask       = 0x1f,
+        .mwdma_mask     = 0x07,
+        .udma_mask      = ATA_UDMA6,
+        .port_ops       = &vt8251_ops,
+};
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
 MODULE_LICENSE("GPL");
@@ -174,6 +197,83 @@ static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
         return 0;
 }
 
+static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+        static const u8 ipm_tbl[] = { 1, 2, 6, 0 };
+        struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
+        int slot = 2 * link->ap->port_no + link->pmp;
+        u32 v = 0;
+        u8 raw;
+
+        switch (scr) {
+        case SCR_STATUS:
+                pci_read_config_byte(pdev, 0xA0 + slot, &raw);
+
+                /* read the DET field, bit0 and 1 of the config byte */
+                v |= raw & 0x03;
+
+                /* read the SPD field, bit4 of the configure byte */
+                if (raw & (1 << 4))
+                        v |= 0x02 << 4;
+                else
+                        v |= 0x01 << 4;
+
+                /* read the IPM field, bit2 and 3 of the config byte */
+                v |= ipm_tbl[(raw >> 2) & 0x3];
+                break;
+
+        case SCR_ERROR:
+                /* devices other than 5287 uses 0xA8 as base */
+                WARN_ON(pdev->device != 0x5287);
+                pci_read_config_dword(pdev, 0xB0 + slot * 4, &v);
+                break;
+
+        case SCR_CONTROL:
+                pci_read_config_byte(pdev, 0xA4 + slot, &raw);
+
+                /* read the DET field, bit0 and bit1 */
+                v |= ((raw & 0x02) << 1) | (raw & 0x01);
+
+                /* read the IPM field, bit2 and bit3 */
+                v |= ((raw >> 2) & 0x03) << 8;
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        *val = v;
+        return 0;
+}
+
+static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+        struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
+        int slot = 2 * link->ap->port_no + link->pmp;
+        u32 v = 0;
+
+        switch (scr) {
+        case SCR_ERROR:
+                /* devices other than 5287 uses 0xA8 as base */
+                WARN_ON(pdev->device != 0x5287);
+                pci_write_config_dword(pdev, 0xB0 + slot * 4, val);
+                return 0;
+
+        case SCR_CONTROL:
+                /* set the DET field */
+                v |= ((val & 0x4) >> 1) | (val & 0x1);
+
+                /* set the IPM field */
+                v |= ((val >> 8) & 0x3) << 2;
+
+                pci_write_config_byte(pdev, 0xA4 + slot, v);
+                return 0;
+
+        default:
+                return -EINVAL;
+        }
+}
+
 /**
  *      svia_tf_load - send taskfile registers to host controller
  *      @ap: Port to which output is sent
@@ -396,6 +496,30 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
         return 0;
 }
 
+static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
+{
+        const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL };
+        struct ata_host *host;
+        int i, rc;
+
+        rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+        if (rc)
+                return rc;
+        *r_host = host;
+
+        rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+        if (rc) {
+                dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
+                return rc;
+        }
+
+        /* 8251 hosts four sata ports as M/S of the two channels */
+        for (i = 0; i < host->n_ports; i++)
+                ata_slave_link_init(host->ports[i]);
+
+        return 0;
+}
+
 static void svia_configure(struct pci_dev *pdev)
 {
         u8 tmp8;
@@ -451,10 +575,10 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         if (rc)
                 return rc;
 
-        if (board_id == vt6420)
-                bar_sizes = &svia_bar_sizes[0];
-        else
+        if (board_id == vt6421)
                 bar_sizes = &vt6421_bar_sizes[0];
+        else
+                bar_sizes = &svia_bar_sizes[0];
 
         for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
                 if ((pci_resource_start(pdev, i) == 0) ||
@@ -467,10 +591,19 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                         return -ENODEV;
                 }
 
-        if (board_id == vt6420)
+        switch (board_id) {
+        case vt6420:
                 rc = vt6420_prepare_host(pdev, &host);
-        else
+                break;
+        case vt6421:
                 rc = vt6421_prepare_host(pdev, &host);
+                break;
+        case vt8251:
+                rc = vt8251_prepare_host(pdev, &host);
+                break;
+        default:
+                rc = -EINVAL;
+        }
         if (rc)
                 return rc;