12 files changed, 13 insertions, 13 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 10bc3f64c453..47c806040524 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1479,7 +1479,7 @@ static void ahci_port_intr(struct ata_port *ap)
                 return;
         }
 
-        /* hmmm... a spurious interupt */
+        /* hmmm... a spurious interrupt */
 
         /* if !NCQ, ignore.  No modern ATA device has broken HSM
          * implementation for non-NCQ commands.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index f9e4cd527942..8227c45109ec 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -856,7 +856,7 @@ err_out:
  *      @pdev: PCI device
  *
  *      Some PCI ATA devices report simplex mode but in fact can be told to
- *      enter non simplex mode. This implements the neccessary logic to
+ *      enter non simplex mode. This implements the necessary logic to
  *      perform the task on such devices. Calling it on other devices will
  *      have -undefined- behaviour.
  */
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 57e827e4109e..e1818fdd9159 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -138,7 +138,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *      Called when the libata layer is about to issue a command. We wrap
  *      this interface so that we can load the correct ATA timings if
- *      neccessary.  Specifically we have a problem that there is only
+ *      necessary.  Specifically we have a problem that there is only
  *      one MWDMA/UDMA bit.
  */
 
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 3578593a882b..01324530d052 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -25,7 +25,7 @@
  * Documentation:
  *      Available from AMD web site.
  * TODO
- *      Review errata to see if serializing is neccessary
+ *      Review errata to see if serializing is necessary
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 988ef736b936..ca9aae09daed 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -105,7 +105,7 @@ struct it821x_dev
 
 /*
  *      We allow users to force the card into non raid mode without
- *      flashing the alternative BIOS. This is also neccessary right now
+ *      flashing the alternative BIOS. This is also necessary right now
  *      for embedded platforms that cannot run a PC BIOS but are using this
  *      device.
  */
@@ -383,7 +383,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc)
  *      @ap: ATA port
  *      @device: Device number (not pointer)
  *
- *      Device selection hook. If neccessary perform clock switching
+ *      Device selection hook. If necessary perform clock switching
  */
 
 static void it821x_passthru_dev_select(struct ata_port *ap,
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index d5483087a3fa..c0d9e0cf208c 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -129,7 +129,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *      Called when the libata layer is about to issue a command. We wrap
  *      this interface so that we can load the correct ATA timings if
- *      neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ *      necessary. Our logic also clears TIME0/TIME1 for the other device so
  *      that, even if we get this wrong, cycles to the other device will
  *      be made PIO0.
  */
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 6e8e55745b7b..9fe66fd75017 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -124,7 +124,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *      Called when the libata layer is about to issue a command. We wrap
  *      this interface so that we can load the correct ATA timings if
- *      neccessary.
+ *      necessary.
  */
 
 static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 3cd5eb2b6c91..44da09ace52c 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -200,7 +200,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *
  *      Called when the libata layer is about to issue a command. We wrap
  *      this interface so that we can load the correct ATA timings if
- *      neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ *      necessary. Our logic also clears TIME0/TIME1 for the other device so
  *      that, even if we get this wrong, cycles to the other device will
  *      be made PIO0.
  */
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index d5b76497f4a2..8109b08fc024 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *
  *      Called when the libata layer is about to issue a command. We wrap
  *      this interface so that we can load the correct ATA timings if
- *      neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ *      necessary. Our logic also clears TIME0/TIME1 for the other device so
  *      that, even if we get this wrong, cycles to the other device will
  *      be made PIO0.
  */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 21ebc485ca4b..725a8586cd6e 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -156,7 +156,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *      Called when the libata layer is about to issue a command. We wrap
  *      this interface so that we can load the correct ATA timings if
- *      neccessary.  Specifically we have a problem that there is only
+ *      necessary.  Specifically we have a problem that there is only
  *      one MWDMA/UDMA bit.
  */
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 4dc2e73298fd..5c1e9cb59ecb 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -16,7 +16,7 @@
  *
  *      If you have strange problems with nVidia chipset systems please
  *      see the SI support documentation and update your system BIOS
- *      if neccessary
+ *      if necessary
  *
  * TODO
  *      If we know all our devices are LBA28 (or LBA28 sized)  we could use
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 5d41b6612d7f..ea7a9a652e61 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -420,7 +420,7 @@ static struct ata_port_operations via_port_ops_noirq = {
  *      @pdev: PCI device
  *      @flags: configuration flags
  *
- *      Set the FIFO properties for this device if neccessary. Used both on
+ *      Set the FIFO properties for this device if necessary. Used both on
  *      set up and on and the resume path
  */