1 files changed, 456 insertions, 247 deletions

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7fa42c36c417..d40c41c5f16c 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -29,11 +29,6 @@
   I distinctly remember a couple workarounds (one related to PCI-X)
   are still needed.
 
-  2) Convert to LibATA new EH.  Required for hotplug, NCQ, and sane
-  probing/error handling in general.  MUST HAVE.
-
-  3) Add hotplug support (easy, once new-EH support appears)
-
   4) Add NCQ support (easy to intermediate, once new-EH support appears)
 
   5) Investigate problems with PCI Message Signalled Interrupts (MSI).
@@ -132,8 +127,8 @@ enum {
         MV_FLAG_DUAL_HC         = (1 << 30),  /* two SATA Host Controllers */
         MV_FLAG_IRQ_COALESCE    = (1 << 29),  /* IRQ coalescing capability */
         MV_COMMON_FLAGS         = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
-                                  ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
+                                  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+                                  ATA_FLAG_PIO_POLLING,
         MV_6XXX_FLAGS           = MV_FLAG_IRQ_COALESCE,
 
         CRQB_FLAG_READ          = (1 << 0),
@@ -254,13 +249,31 @@ enum {
         EDMA_ERR_TRANS_PROTO    = (1 << 31),
         EDMA_ERR_OVERRUN_5      = (1 << 5),
         EDMA_ERR_UNDERRUN_5     = (1 << 6),
-        EDMA_ERR_FATAL          = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
-                                   EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR |
-                                   EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR |
-                                   EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
-                                   EDMA_ERR_LNK_DATA_RX |
-                                   EDMA_ERR_LNK_DATA_TX |
-                                   EDMA_ERR_TRANS_PROTO),
+        EDMA_EH_FREEZE          = EDMA_ERR_D_PAR |
+                                  EDMA_ERR_PRD_PAR |
+                                  EDMA_ERR_DEV_DCON |
+                                  EDMA_ERR_DEV_CON |
+                                  EDMA_ERR_SERR |
+                                  EDMA_ERR_SELF_DIS |
+                                  EDMA_ERR_CRBQ_PAR |
+                                  EDMA_ERR_CRPB_PAR |
+                                  EDMA_ERR_INTRL_PAR |
+                                  EDMA_ERR_IORDY |
+                                  EDMA_ERR_LNK_CTRL_RX_2 |
+                                  EDMA_ERR_LNK_DATA_RX |
+                                  EDMA_ERR_LNK_DATA_TX |
+                                  EDMA_ERR_TRANS_PROTO,
+        EDMA_EH_FREEZE_5        = EDMA_ERR_D_PAR |
+                                  EDMA_ERR_PRD_PAR |
+                                  EDMA_ERR_DEV_DCON |
+                                  EDMA_ERR_DEV_CON |
+                                  EDMA_ERR_OVERRUN_5 |
+                                  EDMA_ERR_UNDERRUN_5 |
+                                  EDMA_ERR_SELF_DIS_5 |
+                                  EDMA_ERR_CRBQ_PAR |
+                                  EDMA_ERR_CRPB_PAR |
+                                  EDMA_ERR_INTRL_PAR |
+                                  EDMA_ERR_IORDY,
 
         EDMA_REQ_Q_BASE_HI_OFS  = 0x10,
         EDMA_REQ_Q_IN_PTR_OFS   = 0x14,         /* also contains BASE_LO */
@@ -359,6 +372,10 @@ struct mv_port_priv {
         dma_addr_t              crpb_dma;
         struct mv_sg            *sg_tbl;
         dma_addr_t              sg_tbl_dma;
+
+        unsigned int            req_idx;
+        unsigned int            resp_idx;
+
         u32                     pp_flags;
 };
 
@@ -391,14 +408,15 @@ static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
 static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
 static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
 static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static void mv_phy_reset(struct ata_port *ap);
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep);
 static int mv_port_start(struct ata_port *ap);
 static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_eng_timeout(struct ata_port *ap);
+static void mv_error_handler(struct ata_port *ap);
+static void mv_post_int_cmd(struct ata_queued_cmd *qc);
+static void mv_eh_freeze(struct ata_port *ap);
+static void mv_eh_thaw(struct ata_port *ap);
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 
 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -422,7 +440,6 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
 static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
 static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
                              unsigned int port_no);
-static void mv_stop_and_reset(struct ata_port *ap);
 
 static struct scsi_host_template mv5_sht = {
         .module                 = THIS_MODULE,
@@ -469,19 +486,21 @@ static const struct ata_port_operations mv5_ops = {
         .exec_command           = ata_exec_command,
         .dev_select             = ata_std_dev_select,
 
-        .phy_reset              = mv_phy_reset,
         .cable_detect           = ata_cable_sata,
 
         .qc_prep                = mv_qc_prep,
         .qc_issue               = mv_qc_issue,
         .data_xfer              = ata_data_xfer,
 
-        .eng_timeout            = mv_eng_timeout,
-
         .irq_clear              = mv_irq_clear,
         .irq_on                 = ata_irq_on,
         .irq_ack                = ata_irq_ack,
 
+        .error_handler          = mv_error_handler,
+        .post_internal_cmd      = mv_post_int_cmd,
+        .freeze                 = mv_eh_freeze,
+        .thaw                   = mv_eh_thaw,
+
         .scr_read               = mv5_scr_read,
         .scr_write              = mv5_scr_write,
 
@@ -498,19 +517,21 @@ static const struct ata_port_operations mv6_ops = {
         .exec_command           = ata_exec_command,
         .dev_select             = ata_std_dev_select,
 
-        .phy_reset              = mv_phy_reset,
         .cable_detect           = ata_cable_sata,
 
         .qc_prep                = mv_qc_prep,
         .qc_issue               = mv_qc_issue,
         .data_xfer              = ata_data_xfer,
 
-        .eng_timeout            = mv_eng_timeout,
-
         .irq_clear              = mv_irq_clear,
         .irq_on                 = ata_irq_on,
         .irq_ack                = ata_irq_ack,
 
+        .error_handler          = mv_error_handler,
+        .post_internal_cmd      = mv_post_int_cmd,
+        .freeze                 = mv_eh_freeze,
+        .thaw                   = mv_eh_thaw,
+
         .scr_read               = mv_scr_read,
         .scr_write              = mv_scr_write,
 
@@ -527,19 +548,21 @@ static const struct ata_port_operations mv_iie_ops = {
         .exec_command           = ata_exec_command,
         .dev_select             = ata_std_dev_select,
 
-        .phy_reset              = mv_phy_reset,
         .cable_detect           = ata_cable_sata,
 
         .qc_prep                = mv_qc_prep_iie,
         .qc_issue               = mv_qc_issue,
         .data_xfer              = ata_data_xfer,
 
-        .eng_timeout            = mv_eng_timeout,
-
         .irq_clear              = mv_irq_clear,
         .irq_on                 = ata_irq_on,
         .irq_ack                = ata_irq_ack,
 
+        .error_handler          = mv_error_handler,
+        .post_internal_cmd      = mv_post_int_cmd,
+        .freeze                 = mv_eh_freeze,
+        .thaw                   = mv_eh_thaw,
+
         .scr_read               = mv_scr_read,
         .scr_write              = mv_scr_write,
 
@@ -738,35 +761,40 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio,
                              struct mv_host_priv *hpriv,
                              struct mv_port_priv *pp)
 {
+        u32 index;
+
         /*
          * initialize request queue
          */
+        index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
+
         WARN_ON(pp->crqb_dma & 0x3ff);
         writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
-        writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
+        writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
                  port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
         if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
-                writelfl(pp->crqb_dma & 0xffffffff,
+                writelfl((pp->crqb_dma & 0xffffffff) | index,
                          port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
         else
-                writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+                writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
 
         /*
          * initialize response queue
          */
+        index = (pp->resp_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_RSP_Q_PTR_SHIFT;
+
         WARN_ON(pp->crpb_dma & 0xff);
         writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
 
         if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
-                writelfl(pp->crpb_dma & 0xffffffff,
+                writelfl((pp->crpb_dma & 0xffffffff) | index,
                          port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
         else
-                writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+                writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
 
-        writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
+        writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
                  port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-
 }
 
 /**
@@ -784,6 +812,11 @@ static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv,
                          struct mv_port_priv *pp)
 {
         if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+                /* clear EDMA event indicators, if any */
+                writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS);
+
+                mv_set_edma_ptrs(base, hpriv, pp);
+
                 writelfl(EDMA_EN, base + EDMA_CMD_OFS);
                 pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
         }
@@ -827,7 +860,6 @@ static int mv_stop_dma(struct ata_port *ap)
 
         if (reg & EDMA_EN) {
                 ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
-                /* FIXME: Consider doing a reset here to recover */
                 err = -EIO;
         }
 
@@ -1101,11 +1133,6 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
         return n_sg;
 }
 
-static inline unsigned mv_inc_q_index(unsigned index)
-{
-        return (index + 1) & MV_MAX_Q_DEPTH_MASK;
-}
-
 static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
 {
         u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
@@ -1145,9 +1172,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
         flags |= qc->tag << CRQB_TAG_SHIFT;
         flags |= qc->tag << CRQB_IOID_SHIFT;    /* 50xx appears to ignore this*/
 
-        /* get current queue index from hardware */
-        in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
-                        >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+        /* get current queue index from software */
+        in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
 
         pp->crqb[in_index].sg_addr =
                 cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
@@ -1237,12 +1263,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 
         WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
         flags |= qc->tag << CRQB_TAG_SHIFT;
-        flags |= qc->tag << CRQB_IOID_SHIFT;    /* "I/O Id" is -really-
+        flags |= qc->tag << CRQB_IOID_SHIFT;    /* "I/O Id" is -really-
                                                    what we use as our tag */
 
-        /* get current queue index from hardware */
-        in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
-                        >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+        /* get current queue index from software */
+        in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
 
         crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
         crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
@@ -1294,8 +1319,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
         void __iomem *port_mmio = mv_ap_base(ap);
         struct mv_port_priv *pp = ap->private_data;
         struct mv_host_priv *hpriv = ap->host->private_data;
-        unsigned in_index;
-        u32 in_ptr;
+        u32 in_index;
 
         if (qc->tf.protocol != ATA_PROT_DMA) {
                 /* We're about to send a non-EDMA capable command to the
@@ -1306,69 +1330,26 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
                 return ata_qc_issue_prot(qc);
         }
 
-        in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-        in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+        mv_start_dma(port_mmio, hpriv, pp);
+
+        in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
 
         /* until we do queuing, the queue should be empty at this point */
         WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
                 >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
-        in_index = mv_inc_q_index(in_index);    /* now incr producer index */
+        pp->req_idx++;
 
-        mv_start_dma(port_mmio, hpriv, pp);
+        in_index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
 
         /* and write the request in pointer to kick the EDMA to life */
-        in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-        in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
-        writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+        writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
+                 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
         return 0;
 }
 
 /**
- *      mv_get_crpb_status - get status from most recently completed cmd
- *      @ap: ATA channel to manipulate
- *
- *      This routine is for use when the port is in DMA mode, when it
- *      will be using the CRPB (command response block) method of
- *      returning command completion information.  We check indices
- *      are good, grab status, and bump the response consumer index to
- *      prove that we're up to date.
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-static u8 mv_get_crpb_status(struct ata_port *ap)
-{
-        void __iomem *port_mmio = mv_ap_base(ap);
-        struct mv_port_priv *pp = ap->private_data;
-        unsigned out_index;
-        u32 out_ptr;
-        u8 ata_status;
-
-        out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-        out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
-
-        ata_status = le16_to_cpu(pp->crpb[out_index].flags)
-                                        >> CRPB_FLAG_STATUS_SHIFT;
-
-        /* increment our consumer index... */
-        out_index = mv_inc_q_index(out_index);
-
-        /* and, until we do NCQ, there should only be 1 CRPB waiting */
-        WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
-                >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
-
-        /* write out our inc'd consumer index so EDMA knows we're caught up */
-        out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-        out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
-        writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-
-        /* Return ATA status register for completed CRPB */
-        return ata_status;
-}
-
-/**
  *      mv_err_intr - Handle error interrupts on the port
  *      @ap: ATA channel to manipulate
  *      @reset_allowed: bool: 0 == don't trigger from reset here
@@ -1382,30 +1363,191 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_err_intr(struct ata_port *ap, int reset_allowed)
+static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
 {
         void __iomem *port_mmio = mv_ap_base(ap);
-        u32 edma_err_cause, serr = 0;
+        u32 edma_err_cause, eh_freeze_mask, serr = 0;
+        struct mv_port_priv *pp = ap->private_data;
+        struct mv_host_priv *hpriv = ap->host->private_data;
+        unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+        unsigned int action = 0, err_mask = 0;
+        struct ata_eh_info *ehi = &ap->eh_info;
 
-        edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+        ata_ehi_clear_desc(ehi);
 
-        if (EDMA_ERR_SERR & edma_err_cause) {
+        if (!edma_enabled) {
+                /* just a guess: do we need to do this? should we
+                 * expand this, and do it in all cases?
+                 */
                 sata_scr_read(ap, SCR_ERROR, &serr);
                 sata_scr_write_flush(ap, SCR_ERROR, serr);
         }
-        if (EDMA_ERR_SELF_DIS & edma_err_cause) {
-                struct mv_port_priv *pp = ap->private_data;
-                pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+
+        edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+        ata_ehi_push_desc(ehi, "edma_err 0x%08x", edma_err_cause);
+
+        /*
+         * all generations share these EDMA error cause bits
+         */
+
+        if (edma_err_cause & EDMA_ERR_DEV)
+                err_mask |= AC_ERR_DEV;
+        if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
+                        EDMA_ERR_CRBQ_PAR | EDMA_ERR_CRPB_PAR |
+                        EDMA_ERR_INTRL_PAR)) {
+                err_mask |= AC_ERR_ATA_BUS;
+                action |= ATA_EH_HARDRESET;
+                ata_ehi_push_desc(ehi, ", parity error");
+        }
+        if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
+                ata_ehi_hotplugged(ehi);
+                ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
+                        ", dev disconnect" : ", dev connect");
+        }
+
+        if (IS_50XX(hpriv)) {
+                eh_freeze_mask = EDMA_EH_FREEZE_5;
+
+                if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
+                        struct mv_port_priv *pp = ap->private_data;
+                        pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+                        ata_ehi_push_desc(ehi, ", EDMA self-disable");
+                }
+        } else {
+                eh_freeze_mask = EDMA_EH_FREEZE;
+
+                if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+                        struct mv_port_priv *pp = ap->private_data;
+                        pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+                        ata_ehi_push_desc(ehi, ", EDMA self-disable");
+                }
+
+                if (edma_err_cause & EDMA_ERR_SERR) {
+                        sata_scr_read(ap, SCR_ERROR, &serr);
+                        sata_scr_write_flush(ap, SCR_ERROR, serr);
+                        err_mask = AC_ERR_ATA_BUS;
+                        action |= ATA_EH_HARDRESET;
+                }
         }
-        DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
-                "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
 
         /* Clear EDMA now that SERR cleanup done */
         writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-        /* check for fatal here and recover if needed */
-        if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
-                mv_stop_and_reset(ap);
+        if (!err_mask) {
+                err_mask = AC_ERR_OTHER;
+                action |= ATA_EH_HARDRESET;
+        }
+
+        ehi->serror |= serr;
+        ehi->action |= action;
+
+        if (qc)
+                qc->err_mask |= err_mask;
+        else
+                ehi->err_mask |= err_mask;
+
+        if (edma_err_cause & eh_freeze_mask)
+                ata_port_freeze(ap);
+        else
+                ata_port_abort(ap);
+}
+
+static void mv_intr_pio(struct ata_port *ap)
+{
+        struct ata_queued_cmd *qc;
+        u8 ata_status;
+
+        /* ignore spurious intr if drive still BUSY */
+        ata_status = readb(ap->ioaddr.status_addr);
+        if (unlikely(ata_status & ATA_BUSY))
+                return;
+
+        /* get active ATA command */
+        qc = ata_qc_from_tag(ap, ap->active_tag);
+        if (unlikely(!qc))                      /* no active tag */
+                return;
+        if (qc->tf.flags & ATA_TFLAG_POLLING)   /* polling; we don't own qc */
+                return;
+
+        /* and finally, complete the ATA command */
+        qc->err_mask |= ac_err_mask(ata_status);
+        ata_qc_complete(qc);
+}
+
+static void mv_intr_edma(struct ata_port *ap)
+{
+        void __iomem *port_mmio = mv_ap_base(ap);
+        struct mv_host_priv *hpriv = ap->host->private_data;
+        struct mv_port_priv *pp = ap->private_data;
+        struct ata_queued_cmd *qc;
+        u32 out_index, in_index;
+        bool work_done = false;
+
+        /* get h/w response queue pointer */
+        in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+                        >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+        while (1) {
+                u16 status;
+
+                /* get s/w response queue last-read pointer, and compare */
+                out_index = pp->resp_idx & MV_MAX_Q_DEPTH_MASK;
+                if (in_index == out_index)
+                        break;
+
+                 
+                /* 50xx: get active ATA command */
+                if (IS_GEN_I(hpriv)) 
+                        qc = ata_qc_from_tag(ap, ap->active_tag);
+
+                /* 60xx: get active ATA command via tag, to enable support
+                 * for queueing.  this works transparently for queued and
+                 * non-queued modes.
+                 */
+                else {
+                        unsigned int tag;
+
+                        if (IS_GEN_II(hpriv))
+                                tag = (le16_to_cpu(pp->crpb[out_index].id)
+                                        >> CRPB_IOID_SHIFT_6) & 0x3f;
+                        else
+                                tag = (le16_to_cpu(pp->crpb[out_index].id)
+                                        >> CRPB_IOID_SHIFT_7) & 0x3f;
+
+                        qc = ata_qc_from_tag(ap, tag);
+                }
+
+                /* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS
+                 * bits (WARNING: might not necessarily be associated
+                 * with this command), which -should- be clear
+                 * if all is well
+                 */
+                status = le16_to_cpu(pp->crpb[out_index].flags);
+                if (unlikely(status & 0xff)) {
+                        mv_err_intr(ap, qc);
+                        return;
+                }
+
+                /* and finally, complete the ATA command */
+                if (qc) {
+                        qc->err_mask |=
+                                ac_err_mask(status >> CRPB_FLAG_STATUS_SHIFT);
+                        ata_qc_complete(qc);
+                }
+
+                /* advance software response queue pointer, to 
+                 * indicate (after the loop completes) to hardware
+                 * that we have consumed a response queue entry.
+                 */
+                work_done = true;
+                pp->resp_idx++;
+        }
+
+        if (work_done)
+                writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
+                         (out_index << EDMA_RSP_Q_PTR_SHIFT),
+                         port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 }
 
 /**
@@ -1428,11 +1570,8 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 {
         void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
         void __iomem *hc_mmio = mv_hc_base(mmio, hc);
-        struct ata_queued_cmd *qc;
         u32 hc_irq_cause;
         int port, port0;
-        int shift, hard_port, handled;
-        unsigned int err_mask;
 
         if (hc == 0)
                 port0 = 0;
@@ -1441,72 +1580,89 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 
         /* we'll need the HC success int register in most cases */
         hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-        if (hc_irq_cause)
-                writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+        if (!hc_irq_cause)
+                return;
+
+        writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
         VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
                 hc,relevant,hc_irq_cause);
 
         for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
-                u8 ata_status = 0;
                 struct ata_port *ap = host->ports[port];
                 struct mv_port_priv *pp = ap->private_data;
+                int have_err_bits, hard_port, shift;
+
+                if ((!ap) || (ap->flags & ATA_FLAG_DISABLED))
+                        continue;
+
+                shift = port << 1;              /* (port * 2) */
+                if (port >= MV_PORTS_PER_HC) {
+                        shift++;        /* skip bit 8 in the HC Main IRQ reg */
+                }
+                have_err_bits = ((PORT0_ERR << shift) & relevant);
+
+                if (unlikely(have_err_bits)) {
+                        struct ata_queued_cmd *qc;
+
+                        qc = ata_qc_from_tag(ap, ap->active_tag);
+                        if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+                                continue;
+
+                        mv_err_intr(ap, qc);
+                        continue;
+                }
 
                 hard_port = mv_hardport_from_port(port); /* range 0..3 */
-                handled = 0;    /* ensure ata_status is set if handled++ */
 
-                /* Note that DEV_IRQ might happen spuriously during EDMA,
-                 * and should be ignored in such cases.
-                 * The cause of this is still under investigation.
-                 */
                 if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-                        /* EDMA: check for response queue interrupt */
-                        if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
-                                ata_status = mv_get_crpb_status(ap);
-                                handled = 1;
-                        }
+                        if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause)
+                                mv_intr_edma(ap);
                 } else {
-                        /* PIO: check for device (drive) interrupt */
-                        if ((DEV_IRQ << hard_port) & hc_irq_cause) {
-                                ata_status = readb(ap->ioaddr.status_addr);
-                                handled = 1;
-                                /* ignore spurious intr if drive still BUSY */
-                                if (ata_status & ATA_BUSY) {
-                                        ata_status = 0;
-                                        handled = 0;
-                                }
-                        }
+                        if ((DEV_IRQ << hard_port) & hc_irq_cause)
+                                mv_intr_pio(ap);
                 }
+        }
+        VPRINTK("EXIT\n");
+}
 
-                if (ap && (ap->flags & ATA_FLAG_DISABLED))
-                        continue;
+static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
+{
+        struct ata_port *ap;
+        struct ata_queued_cmd *qc;
+        struct ata_eh_info *ehi;
+        unsigned int i, err_mask, printed = 0;
+        u32 err_cause;
 
-                err_mask = ac_err_mask(ata_status);
+        err_cause = readl(mmio + PCI_IRQ_CAUSE_OFS);
 
-                shift = port << 1;              /* (port * 2) */
-                if (port >= MV_PORTS_PER_HC) {
-                        shift++;        /* skip bit 8 in the HC Main IRQ reg */
-                }
-                if ((PORT0_ERR << shift) & relevant) {
-                        mv_err_intr(ap, 1);
-                        err_mask |= AC_ERR_OTHER;
-                        handled = 1;
-                }
+        dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
+                   err_cause);
 
-                if (handled) {
+        DPRINTK("All regs @ PCI error\n");
+        mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
+
+        writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+
+        for (i = 0; i < host->n_ports; i++) {
+                ap = host->ports[i];
+                if (!ata_port_offline(ap)) {
+                        ehi = &ap->eh_info;
+                        ata_ehi_clear_desc(ehi);
+                        if (!printed++)
+                                ata_ehi_push_desc(ehi,
+                                        "PCI err cause 0x%08x", err_cause);
+                        err_mask = AC_ERR_HOST_BUS;
+                        ehi->action = ATA_EH_HARDRESET;
                         qc = ata_qc_from_tag(ap, ap->active_tag);
-                        if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
-                                VPRINTK("port %u IRQ found for qc, "
-                                        "ata_status 0x%x\n", port,ata_status);
-                                /* mark qc status appropriately */
-                                if (!(qc->tf.flags & ATA_TFLAG_POLLING)) {
-                                        qc->err_mask |= err_mask;
-                                        ata_qc_complete(qc);
-                                }
-                        }
+                        if (qc)
+                                qc->err_mask |= err_mask;
+                        else
+                                ehi->err_mask |= err_mask;
+
+                        ata_port_freeze(ap);
                 }
         }
-        VPRINTK("EXIT\n");
 }
 
 /**
@@ -1541,24 +1697,21 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
         n_hcs = mv_get_hc_count(host->ports[0]->flags);
         spin_lock(&host->lock);
 
+        if (unlikely(irq_stat & PCI_ERR)) {
+                mv_pci_error(host, mmio);
+                handled = 1;
+                goto out_unlock;        /* skip all other HC irq handling */
+        }
+
         for (hc = 0; hc < n_hcs; hc++) {
                 u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
                 if (relevant) {
                         mv_host_intr(host, relevant, hc);
-                        handled++;
+                        handled = 1;
                 }
         }
 
-        if (PCI_ERR & irq_stat) {
-                printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
-                       readl(mmio + PCI_IRQ_CAUSE_OFS));
-
-                DPRINTK("All regs @ PCI error\n");
-                mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
-
-                writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
-                handled++;
-        }
+out_unlock:
         spin_unlock(&host->lock);
 
         return IRQ_RETVAL(handled);
@@ -1967,28 +2120,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
                 mdelay(1);
 }
 
-static void mv_stop_and_reset(struct ata_port *ap)
-{
-        struct mv_host_priv *hpriv = ap->host->private_data;
-        void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
-
-        mv_stop_dma(ap);
-
-        mv_channel_reset(hpriv, mmio, ap->port_no);
-
-        __mv_phy_reset(ap, 0);
-}
-
-static inline void __msleep(unsigned int msec, int can_sleep)
-{
-        if (can_sleep)
-                msleep(msec);
-        else
-                mdelay(msec);
-}
-
 /**
- *      __mv_phy_reset - Perform eDMA reset followed by COMRESET
+ *      mv_phy_reset - Perform eDMA reset followed by COMRESET
  *      @ap: ATA channel to manipulate
  *
  *      Part of this is taken from __sata_phy_reset and modified to
@@ -1998,14 +2131,12 @@ static inline void __msleep(unsigned int msec, int can_sleep)
  *      Inherited from caller.  This is coded to safe to call at
  *      interrupt level, i.e. it does not sleep.
  */
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
+static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
+                         unsigned long deadline)
 {
         struct mv_port_priv *pp = ap->private_data;
         struct mv_host_priv *hpriv = ap->host->private_data;
         void __iomem *port_mmio = mv_ap_base(ap);
-        struct ata_taskfile tf;
-        struct ata_device *dev = &ap->device[0];
-        unsigned long deadline;
         int retry = 5;
         u32 sstatus;
 
@@ -2018,18 +2149,17 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
         /* Issue COMRESET via SControl */
 comreset_retry:
         sata_scr_write_flush(ap, SCR_CONTROL, 0x301);
-        __msleep(1, can_sleep);
+        msleep(1);
 
         sata_scr_write_flush(ap, SCR_CONTROL, 0x300);
-        __msleep(20, can_sleep);
+        msleep(20);
 
-        deadline = jiffies + msecs_to_jiffies(200);
         do {
                 sata_scr_read(ap, SCR_STATUS, &sstatus);
                 if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
                         break;
 
-                __msleep(1, can_sleep);
+                msleep(1);
         } while (time_before(jiffies, deadline));
 
         /* work around errata */
@@ -2042,13 +2172,8 @@ comreset_retry:
                 "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
                 mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
 
-        if (ata_port_online(ap)) {
-                ata_port_probe(ap);
-        } else {
-                sata_scr_read(ap, SCR_STATUS, &sstatus);
-                ata_port_printk(ap, KERN_INFO,
-                                "no device found (phy stat %08x)\n", sstatus);
-                ata_port_disable(ap);
+        if (ata_port_offline(ap)) {
+                *class = ATA_DEV_NONE;
                 return;
         }
 
@@ -2062,68 +2187,152 @@ comreset_retry:
                 u8 drv_stat = ata_check_status(ap);
                 if ((drv_stat != 0x80) && (drv_stat != 0x7f))
                         break;
-                __msleep(500, can_sleep);
+                msleep(500);
                 if (retry-- <= 0)
                         break;
+                if (time_after(jiffies, deadline))
+                        break;
         }
 
-        tf.lbah = readb(ap->ioaddr.lbah_addr);
-        tf.lbam = readb(ap->ioaddr.lbam_addr);
-        tf.lbal = readb(ap->ioaddr.lbal_addr);
-        tf.nsect = readb(ap->ioaddr.nsect_addr);
+        /* FIXME: if we passed the deadline, the following
+         * code probably produces an invalid result
+         */
 
-        dev->class = ata_dev_classify(&tf);
-        if (!ata_dev_enabled(dev)) {
-                VPRINTK("Port disabled post-sig: No device present.\n");
-                ata_port_disable(ap);
-        }
+        /* finally, read device signature from TF registers */
+        *class = ata_dev_try_classify(ap, 0, NULL);
 
         writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-        pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+        WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
 
         VPRINTK("EXIT\n");
 }
 
-static void mv_phy_reset(struct ata_port *ap)
+static int mv_prereset(struct ata_port *ap, unsigned long deadline)
 {
-        __mv_phy_reset(ap, 1);
+        struct mv_port_priv *pp = ap->private_data;
+        struct ata_eh_context *ehc = &ap->eh_context;
+        int rc;
+        
+        rc = mv_stop_dma(ap);
+        if (rc)
+                ehc->i.action |= ATA_EH_HARDRESET;
+
+        if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
+                pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
+                ehc->i.action |= ATA_EH_HARDRESET;
+        }
+
+        /* if we're about to do hardreset, nothing more to do */
+        if (ehc->i.action & ATA_EH_HARDRESET)
+                return 0;
+
+        if (ata_port_online(ap))
+                rc = ata_wait_ready(ap, deadline);
+        else
+                rc = -ENODEV;
+
+        return rc;
 }
 
-/**
- *      mv_eng_timeout - Routine called by libata when SCSI times out I/O
- *      @ap: ATA channel to manipulate
- *
- *      Intent is to clear all pending error conditions, reset the
- *      chip/bus, fail the command, and move on.
- *
- *      LOCKING:
- *      This routine holds the host lock while failing the command.
- */
-static void mv_eng_timeout(struct ata_port *ap)
+static int mv_hardreset(struct ata_port *ap, unsigned int *class,
+                        unsigned long deadline)
 {
+        struct mv_host_priv *hpriv = ap->host->private_data;
         void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
-        struct ata_queued_cmd *qc;
-        unsigned long flags;
 
-        ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n");
-        DPRINTK("All regs @ start of eng_timeout\n");
-        mv_dump_all_regs(mmio, ap->port_no, to_pci_dev(ap->host->dev));
+        mv_stop_dma(ap);
 
-        qc = ata_qc_from_tag(ap, ap->active_tag);
-        printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
-               mmio, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd);
+        mv_channel_reset(hpriv, mmio, ap->port_no);
 
-        spin_lock_irqsave(&ap->host->lock, flags);
-        mv_err_intr(ap, 0);
-        mv_stop_and_reset(ap);
-        spin_unlock_irqrestore(&ap->host->lock, flags);
+        mv_phy_reset(ap, class, deadline);
+
+        return 0;
+}
+
+static void mv_postreset(struct ata_port *ap, unsigned int *classes)
+{
+        u32 serr;
+
+        /* print link status */
+        sata_print_link_status(ap);
+
+        /* clear SError */
+        sata_scr_read(ap, SCR_ERROR, &serr);
+        sata_scr_write_flush(ap, SCR_ERROR, serr);
+
+        /* bail out if no device is present */
+        if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+                DPRINTK("EXIT, no device\n");
+                return;
+        }
+
+        /* set up device control */
+        iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+}
+
+static void mv_error_handler(struct ata_port *ap)
+{
+        ata_do_eh(ap, mv_prereset, ata_std_softreset,
+                  mv_hardreset, mv_postreset);
+}
+
+static void mv_post_int_cmd(struct ata_queued_cmd *qc)
+{
+        mv_stop_dma(qc->ap);
+}
+
+static void mv_eh_freeze(struct ata_port *ap)
+{
+        void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+        unsigned int hc = (ap->port_no > 3) ? 1 : 0;
+        u32 tmp, mask;
+        unsigned int shift;
+
+        /* FIXME: handle coalescing completion events properly */
+
+        shift = ap->port_no * 2;
+        if (hc > 0)
+                shift++;
 
-        WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
-        if (qc->flags & ATA_QCFLAG_ACTIVE) {
-                qc->err_mask |= AC_ERR_TIMEOUT;
-                ata_eh_qc_complete(qc);
+        mask = 0x3 << shift;
+
+        /* disable assertion of portN err, done events */
+        tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
+        writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS);
+}
+
+static void mv_eh_thaw(struct ata_port *ap)
+{
+        void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+        unsigned int hc = (ap->port_no > 3) ? 1 : 0;
+        void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+        void __iomem *port_mmio = mv_ap_base(ap);
+        u32 tmp, mask, hc_irq_cause;
+        unsigned int shift, hc_port_no = ap->port_no;
+
+        /* FIXME: handle coalescing completion events properly */
+
+        shift = ap->port_no * 2;
+        if (hc > 0) {
+                shift++;
+                hc_port_no -= 4;
         }
+
+        mask = 0x3 << shift;
+
+        /* clear EDMA errors on this port */
+        writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+        /* clear pending irq events */
+        hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+        hc_irq_cause &= ~(1 << hc_port_no);     /* clear CRPB-done */
+        hc_irq_cause &= ~(1 << (hc_port_no + 8)); /* clear Device int */
+        writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+
+        /* enable assertion of portN err, done events */
+        tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
+        writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS);
 }
 
 /**