aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata/sata_mv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_mv.c')
-rw-r--r--drivers/ata/sata_mv.c42
1 files changed, 19 insertions, 23 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 5b9f937d0f87..16c15ed3536e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2242,6 +2242,16 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
2242 return; 2242 return;
2243} 2243}
2244 2244
2245static void mv_setup_ifctl(void __iomem *port_mmio, int want_gen2i)
2246{
2247 u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
2248
2249 ifctl = (ifctl & 0xf7f) | 0x9b1000; /* from chip spec */
2250 if (want_gen2i)
2251 ifctl |= (1 << 7); /* enable gen2i speed */
2252 writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
2253}
2254
2245/* 2255/*
2246 * Caller must ensure that EDMA is not active, 2256 * Caller must ensure that EDMA is not active,
2247 * by first doing mv_stop_edma() where needed. 2257 * by first doing mv_stop_edma() where needed.
@@ -2253,18 +2263,17 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
2253 2263
2254 writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); 2264 writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
2255 2265
2256 if (IS_GEN_II(hpriv)) { 2266 if (!IS_GEN_I(hpriv)) {
2257 u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG); 2267 /* Enable 3.0gb/s link speed */
2258 ifctl |= (1 << 7); /* enable gen2i speed */ 2268 mv_setup_ifctl(port_mmio, 1);
2259 ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
2260 writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
2261 } 2269 }
2262 2270 /*
2263 udelay(25); /* allow reset propagation */ 2271 * Strobing ATA_RST here causes a hard reset of the SATA transport,
2264 2272 * link, and physical layers. It resets all SATA interface registers
2265 /* Spec never mentions clearing the bit. Marvell's driver does 2273 * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
2266 * clear the bit, however.
2267 */ 2274 */
2275 writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
2276 udelay(25); /* allow reset propagation */
2268 writelfl(0, port_mmio + EDMA_CMD_OFS); 2277 writelfl(0, port_mmio + EDMA_CMD_OFS);
2269 2278
2270 hpriv->ops->phy_errata(hpriv, mmio, port_no); 2279 hpriv->ops->phy_errata(hpriv, mmio, port_no);
@@ -2711,19 +2720,6 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
2711 hpriv->ops->enable_leds(hpriv, mmio); 2720 hpriv->ops->enable_leds(hpriv, mmio);
2712 2721
2713 for (port = 0; port < host->n_ports; port++) { 2722 for (port = 0; port < host->n_ports; port++) {
2714 if (IS_GEN_II(hpriv)) {
2715 void __iomem *port_mmio = mv_port_base(mmio, port);
2716
2717 u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
2718 ifctl |= (1 << 7); /* enable gen2i speed */
2719 ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
2720 writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
2721 }
2722
2723 hpriv->ops->phy_errata(hpriv, mmio, port);
2724 }
2725
2726 for (port = 0; port < host->n_ports; port++) {
2727 struct ata_port *ap = host->ports[port]; 2723 struct ata_port *ap = host->ports[port];
2728 void __iomem *port_mmio = mv_port_base(mmio, port); 2724 void __iomem *port_mmio = mv_port_base(mmio, port);
2729 2725