aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_sis.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_sis.c')
-rw-r--r--drivers/ata/pata_sis.c1030
1 files changed, 1030 insertions, 0 deletions
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
new file mode 100644
index 000000000000..4ad7fb44bfa6
--- /dev/null
+++ b/drivers/ata/pata_sis.c
@@ -0,0 +1,1030 @@
1/*
2 * pata_sis.c - SiS ATA driver
3 *
4 * (C) 2005 Red Hat <alan@redhat.com>
5 *
6 * Based upon linux/drivers/ide/pci/sis5513.c
7 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
8 * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
9 * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
10 * SiS Taiwan : for direct support and hardware.
11 * Daniela Engert : for initial ATA100 advices and numerous others.
12 * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
13 * for checking code correctness, providing patches.
14 * Original tests and design on the SiS620 chipset.
15 * ATA100 tests and design on the SiS735 chipset.
16 * ATA16/33 support from specs
17 * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
18 *
19 *
20 * TODO
21 * Check MWDMA on drives that don't support MWDMA speed pio cycles ?
22 * More Testing
23 */
24
25#include <linux/kernel.h>
26#include <linux/module.h>
27#include <linux/pci.h>
28#include <linux/init.h>
29#include <linux/blkdev.h>
30#include <linux/delay.h>
31#include <linux/device.h>
32#include <scsi/scsi_host.h>
33#include <linux/libata.h>
34#include <linux/ata.h>
35
36#define DRV_NAME "pata_sis"
37#define DRV_VERSION "0.4.2"
38
39struct sis_chipset {
40 u16 device; /* PCI host ID */
41 struct ata_port_info *info; /* Info block */
42 /* Probably add family, cable detect type etc here to clean
43 up code later */
44};
45
46/**
47 * sis_port_base - return PCI configuration base for dev
48 * @adev: device
49 *
50 * Returns the base of the PCI configuration registers for this port
51 * number.
52 */
53
54static int sis_port_base(struct ata_device *adev)
55{
56 return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno);
57}
58
59/**
60 * sis_133_pre_reset - check for 40/80 pin
61 * @ap: Port
62 *
63 * Perform cable detection for the later UDMA133 capable
64 * SiS chipset.
65 */
66
67static int sis_133_pre_reset(struct ata_port *ap)
68{
69 static const struct pci_bits sis_enable_bits[] = {
70 { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */
71 { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */
72 };
73
74 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
75 u16 tmp;
76
77 if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
78 ata_port_disable(ap);
79 printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
80 return 0;
81 }
82 /* The top bit of this register is the cable detect bit */
83 pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
84 if (tmp & 0x8000)
85 ap->cbl = ATA_CBL_PATA40;
86 else
87 ap->cbl = ATA_CBL_PATA80;
88
89 return ata_std_prereset(ap);
90}
91
92/**
93 * sis_error_handler - Probe specified port on PATA host controller
94 * @ap: Port to probe
95 *
96 * LOCKING:
97 * None (inherited from caller).
98 */
99
100static void sis_133_error_handler(struct ata_port *ap)
101{
102 ata_bmdma_drive_eh(ap, sis_133_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
103}
104
105
106/**
107 * sis_66_pre_reset - check for 40/80 pin
108 * @ap: Port
109 *
110 * Perform cable detection on the UDMA66, UDMA100 and early UDMA133
111 * SiS IDE controllers.
112 */
113
114static int sis_66_pre_reset(struct ata_port *ap)
115{
116 static const struct pci_bits sis_enable_bits[] = {
117 { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */
118 { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */
119 };
120
121 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
122 u8 tmp;
123
124 if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
125 ata_port_disable(ap);
126 printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
127 return 0;
128 }
129 /* Older chips keep cable detect in bits 4/5 of reg 0x48 */
130 pci_read_config_byte(pdev, 0x48, &tmp);
131 tmp >>= ap->port_no;
132 if (tmp & 0x10)
133 ap->cbl = ATA_CBL_PATA40;
134 else
135 ap->cbl = ATA_CBL_PATA80;
136
137 return ata_std_prereset(ap);
138}
139
140/**
141 * sis_66_error_handler - Probe specified port on PATA host controller
142 * @ap: Port to probe
143 * @classes:
144 *
145 * LOCKING:
146 * None (inherited from caller).
147 */
148
149static void sis_66_error_handler(struct ata_port *ap)
150{
151 ata_bmdma_drive_eh(ap, sis_66_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
152}
153
154/**
155 * sis_old_pre_reset - probe begin
156 * @ap: ATA port
157 *
158 * Set up cable type and use generic probe init
159 */
160
161static int sis_old_pre_reset(struct ata_port *ap)
162{
163 static const struct pci_bits sis_enable_bits[] = {
164 { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */
165 { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */
166 };
167
168 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
169
170 if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
171 ata_port_disable(ap);
172 printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
173 return 0;
174 }
175 ap->cbl = ATA_CBL_PATA40;
176 return ata_std_prereset(ap);
177}
178
179
180/**
181 * sis_old_error_handler - Probe specified port on PATA host controller
182 * @ap: Port to probe
183 *
184 * LOCKING:
185 * None (inherited from caller).
186 */
187
188static void sis_old_error_handler(struct ata_port *ap)
189{
190 ata_bmdma_drive_eh(ap, sis_old_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
191}
192
193/**
194 * sis_set_fifo - Set RWP fifo bits for this device
195 * @ap: Port
196 * @adev: Device
197 *
198 * SIS chipsets implement prefetch/postwrite bits for each device
199 * on both channels. This functionality is not ATAPI compatible and
200 * must be configured according to the class of device present
201 */
202
203static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev)
204{
205 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
206 u8 fifoctrl;
207 u8 mask = 0x11;
208
209 mask <<= (2 * ap->port_no);
210 mask <<= adev->devno;
211
212 /* This holds various bits including the FIFO control */
213 pci_read_config_byte(pdev, 0x4B, &fifoctrl);
214 fifoctrl &= ~mask;
215
216 /* Enable for ATA (disk) only */
217 if (adev->class == ATA_DEV_ATA)
218 fifoctrl |= mask;
219 pci_write_config_byte(pdev, 0x4B, fifoctrl);
220}
221
222/**
223 * sis_old_set_piomode - Initialize host controller PATA PIO timings
224 * @ap: Port whose timings we are configuring
225 * @adev: Device we are configuring for.
226 *
227 * Set PIO mode for device, in host controller PCI config space. This
228 * function handles PIO set up for all chips that are pre ATA100 and
229 * also early ATA100 devices.
230 *
231 * LOCKING:
232 * None (inherited from caller).
233 */
234
235static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
236{
237 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
238 int port = sis_port_base(adev);
239 u8 t1, t2;
240 int speed = adev->pio_mode - XFER_PIO_0;
241
242 const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
243 const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
244
245 sis_set_fifo(ap, adev);
246
247 pci_read_config_byte(pdev, port, &t1);
248 pci_read_config_byte(pdev, port + 1, &t2);
249
250 t1 &= ~0x0F; /* Clear active/recovery timings */
251 t2 &= ~0x07;
252
253 t1 |= active[speed];
254 t2 |= recovery[speed];
255
256 pci_write_config_byte(pdev, port, t1);
257 pci_write_config_byte(pdev, port + 1, t2);
258}
259
260/**
261 * sis_100_set_pioode - Initialize host controller PATA PIO timings
262 * @ap: Port whose timings we are configuring
263 * @adev: Device we are configuring for.
264 *
265 * Set PIO mode for device, in host controller PCI config space. This
266 * function handles PIO set up for ATA100 devices and early ATA133.
267 *
268 * LOCKING:
269 * None (inherited from caller).
270 */
271
272static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
273{
274 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
275 int port = sis_port_base(adev);
276 int speed = adev->pio_mode - XFER_PIO_0;
277
278 const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
279
280 sis_set_fifo(ap, adev);
281
282 pci_write_config_byte(pdev, port, actrec[speed]);
283}
284
285/**
286 * sis_133_set_pioode - Initialize host controller PATA PIO timings
287 * @ap: Port whose timings we are configuring
288 * @adev: Device we are configuring for.
289 *
290 * Set PIO mode for device, in host controller PCI config space. This
291 * function handles PIO set up for the later ATA133 devices.
292 *
293 * LOCKING:
294 * None (inherited from caller).
295 */
296
297static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
298{
299 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
300 int port = 0x40;
301 u32 t1;
302 u32 reg54;
303 int speed = adev->pio_mode - XFER_PIO_0;
304
305 const u32 timing133[] = {
306 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
307 0x0C266000,
308 0x04263000,
309 0x0C0A3000,
310 0x05093000
311 };
312 const u32 timing100[] = {
313 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
314 0x091C4000,
315 0x031C2000,
316 0x09072000,
317 0x04062000
318 };
319
320 sis_set_fifo(ap, adev);
321
322 /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
323 pci_read_config_dword(pdev, 0x54, &reg54);
324 if (reg54 & 0x40000000)
325 port = 0x70;
326 port += 8 * ap->port_no + 4 * adev->devno;
327
328 pci_read_config_dword(pdev, port, &t1);
329 t1 &= 0xC0C00FFF; /* Mask out timing */
330
331 if (t1 & 0x08) /* 100 or 133 ? */
332 t1 |= timing133[speed];
333 else
334 t1 |= timing100[speed];
335 pci_write_config_byte(pdev, port, t1);
336}
337
338/**
339 * sis_old_set_dmamode - Initialize host controller PATA DMA timings
340 * @ap: Port whose timings we are configuring
341 * @adev: Device to program
342 *
343 * Set UDMA/MWDMA mode for device, in host controller PCI config space.
344 * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike
345 * the old ide/pci driver.
346 *
347 * LOCKING:
348 * None (inherited from caller).
349 */
350
351static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
352{
353 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
354 int speed = adev->dma_mode - XFER_MW_DMA_0;
355 int drive_pci = sis_port_base(adev);
356 u16 timing;
357
358 const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
359 const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
360
361 pci_read_config_word(pdev, drive_pci, &timing);
362
363 if (adev->dma_mode < XFER_UDMA_0) {
364 /* bits 3-0 hold recovery timing bits 8-10 active timing and
365 the higer bits are dependant on the device */
366 timing &= ~ 0x870F;
367 timing |= mwdma_bits[speed];
368 pci_write_config_word(pdev, drive_pci, timing);
369 } else {
370 /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */
371 speed = adev->dma_mode - XFER_UDMA_0;
372 timing &= ~0x6000;
373 timing |= udma_bits[speed];
374 }
375}
376
377/**
378 * sis_66_set_dmamode - Initialize host controller PATA DMA timings
379 * @ap: Port whose timings we are configuring
380 * @adev: Device to program
381 *
382 * Set UDMA/MWDMA mode for device, in host controller PCI config space.
383 * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike
384 * the old ide/pci driver.
385 *
386 * LOCKING:
387 * None (inherited from caller).
388 */
389
390static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
391{
392 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
393 int speed = adev->dma_mode - XFER_MW_DMA_0;
394 int drive_pci = sis_port_base(adev);
395 u16 timing;
396
397 const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
398 const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
399
400 pci_read_config_word(pdev, drive_pci, &timing);
401
402 if (adev->dma_mode < XFER_UDMA_0) {
403 /* bits 3-0 hold recovery timing bits 8-10 active timing and
404 the higer bits are dependant on the device, bit 15 udma */
405 timing &= ~ 0x870F;
406 timing |= mwdma_bits[speed];
407 } else {
408 /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
409 speed = adev->dma_mode - XFER_UDMA_0;
410 timing &= ~0x6000;
411 timing |= udma_bits[speed];
412 }
413 pci_write_config_word(pdev, drive_pci, timing);
414}
415
416/**
417 * sis_100_set_dmamode - Initialize host controller PATA DMA timings
418 * @ap: Port whose timings we are configuring
419 * @adev: Device to program
420 *
421 * Set UDMA/MWDMA mode for device, in host controller PCI config space.
422 * Handles UDMA66 and early UDMA100 devices.
423 *
424 * LOCKING:
425 * None (inherited from caller).
426 */
427
428static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
429{
430 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
431 int speed = adev->dma_mode - XFER_MW_DMA_0;
432 int drive_pci = sis_port_base(adev);
433 u16 timing;
434
435 const u16 udma_bits[] = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
436
437 pci_read_config_word(pdev, drive_pci, &timing);
438
439 if (adev->dma_mode < XFER_UDMA_0) {
440 /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */
441 } else {
442 /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
443 speed = adev->dma_mode - XFER_UDMA_0;
444 timing &= ~0x0F00;
445 timing |= udma_bits[speed];
446 }
447 pci_write_config_word(pdev, drive_pci, timing);
448}
449
450/**
451 * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings
452 * @ap: Port whose timings we are configuring
453 * @adev: Device to program
454 *
455 * Set UDMA/MWDMA mode for device, in host controller PCI config space.
456 * Handles early SiS 961 bridges. Supports MWDMA as well unlike
457 * the old ide/pci driver.
458 *
459 * LOCKING:
460 * None (inherited from caller).
461 */
462
463static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev)
464{
465 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
466 int speed = adev->dma_mode - XFER_MW_DMA_0;
467 int drive_pci = sis_port_base(adev);
468 u16 timing;
469
470 const u16 udma_bits[] = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
471
472 pci_read_config_word(pdev, drive_pci, &timing);
473
474 if (adev->dma_mode < XFER_UDMA_0) {
475 /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */
476 } else {
477 /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
478 speed = adev->dma_mode - XFER_UDMA_0;
479 timing &= ~0x0F00;
480 timing |= udma_bits[speed];
481 }
482 pci_write_config_word(pdev, drive_pci, timing);
483}
484
485/**
486 * sis_133_set_dmamode - Initialize host controller PATA DMA timings
487 * @ap: Port whose timings we are configuring
488 * @adev: Device to program
489 *
490 * Set UDMA/MWDMA mode for device, in host controller PCI config space.
491 * Handles early SiS 961 bridges. Supports MWDMA as well unlike
492 * the old ide/pci driver.
493 *
494 * LOCKING:
495 * None (inherited from caller).
496 */
497
498static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
499{
500 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
501 int speed = adev->dma_mode - XFER_MW_DMA_0;
502 int port = 0x40;
503 u32 t1;
504 u32 reg54;
505
506 /* bits 4- cycle time 8 - cvs time */
507 const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
508 const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
509
510 /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
511 pci_read_config_dword(pdev, 0x54, &reg54);
512 if (reg54 & 0x40000000)
513 port = 0x70;
514 port += (8 * ap->port_no) + (4 * adev->devno);
515
516 pci_read_config_dword(pdev, port, &t1);
517
518 if (adev->dma_mode < XFER_UDMA_0) {
519 t1 &= ~0x00000004;
520 /* FIXME: need data sheet to add MWDMA here. Also lacking on
521 ide/pci driver */
522 } else {
523 speed = adev->dma_mode - XFER_UDMA_0;
524 /* if & 8 no UDMA133 - need info for ... */
525 t1 &= ~0x00000FF0;
526 t1 |= 0x00000004;
527 if (t1 & 0x08)
528 t1 |= timing_u133[speed];
529 else
530 t1 |= timing_u100[speed];
531 }
532 pci_write_config_dword(pdev, port, t1);
533}
534
535static struct scsi_host_template sis_sht = {
536 .module = THIS_MODULE,
537 .name = DRV_NAME,
538 .ioctl = ata_scsi_ioctl,
539 .queuecommand = ata_scsi_queuecmd,
540 .can_queue = ATA_DEF_QUEUE,
541 .this_id = ATA_SHT_THIS_ID,
542 .sg_tablesize = LIBATA_MAX_PRD,
543 .max_sectors = ATA_MAX_SECTORS,
544 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
545 .emulated = ATA_SHT_EMULATED,
546 .use_clustering = ATA_SHT_USE_CLUSTERING,
547 .proc_name = DRV_NAME,
548 .dma_boundary = ATA_DMA_BOUNDARY,
549 .slave_configure = ata_scsi_slave_config,
550 .bios_param = ata_std_bios_param,
551};
552
553static const struct ata_port_operations sis_133_ops = {
554 .port_disable = ata_port_disable,
555 .set_piomode = sis_133_set_piomode,
556 .set_dmamode = sis_133_set_dmamode,
557 .mode_filter = ata_pci_default_filter,
558
559 .tf_load = ata_tf_load,
560 .tf_read = ata_tf_read,
561 .check_status = ata_check_status,
562 .exec_command = ata_exec_command,
563 .dev_select = ata_std_dev_select,
564
565 .freeze = ata_bmdma_freeze,
566 .thaw = ata_bmdma_thaw,
567 .error_handler = sis_133_error_handler,
568 .post_internal_cmd = ata_bmdma_post_internal_cmd,
569
570 .bmdma_setup = ata_bmdma_setup,
571 .bmdma_start = ata_bmdma_start,
572 .bmdma_stop = ata_bmdma_stop,
573 .bmdma_status = ata_bmdma_status,
574 .qc_prep = ata_qc_prep,
575 .qc_issue = ata_qc_issue_prot,
576 .data_xfer = ata_pio_data_xfer,
577
578 .eng_timeout = ata_eng_timeout,
579
580 .irq_handler = ata_interrupt,
581 .irq_clear = ata_bmdma_irq_clear,
582
583 .port_start = ata_port_start,
584 .port_stop = ata_port_stop,
585 .host_stop = ata_host_stop,
586};
587
588static const struct ata_port_operations sis_133_early_ops = {
589 .port_disable = ata_port_disable,
590 .set_piomode = sis_100_set_piomode,
591 .set_dmamode = sis_133_early_set_dmamode,
592 .mode_filter = ata_pci_default_filter,
593
594 .tf_load = ata_tf_load,
595 .tf_read = ata_tf_read,
596 .check_status = ata_check_status,
597 .exec_command = ata_exec_command,
598 .dev_select = ata_std_dev_select,
599
600 .freeze = ata_bmdma_freeze,
601 .thaw = ata_bmdma_thaw,
602 .error_handler = sis_66_error_handler,
603 .post_internal_cmd = ata_bmdma_post_internal_cmd,
604
605 .bmdma_setup = ata_bmdma_setup,
606 .bmdma_start = ata_bmdma_start,
607 .bmdma_stop = ata_bmdma_stop,
608 .bmdma_status = ata_bmdma_status,
609 .qc_prep = ata_qc_prep,
610 .qc_issue = ata_qc_issue_prot,
611 .data_xfer = ata_pio_data_xfer,
612
613 .eng_timeout = ata_eng_timeout,
614
615 .irq_handler = ata_interrupt,
616 .irq_clear = ata_bmdma_irq_clear,
617
618 .port_start = ata_port_start,
619 .port_stop = ata_port_stop,
620 .host_stop = ata_host_stop,
621};
622
623static const struct ata_port_operations sis_100_ops = {
624 .port_disable = ata_port_disable,
625 .set_piomode = sis_100_set_piomode,
626 .set_dmamode = sis_100_set_dmamode,
627 .mode_filter = ata_pci_default_filter,
628
629 .tf_load = ata_tf_load,
630 .tf_read = ata_tf_read,
631 .check_status = ata_check_status,
632 .exec_command = ata_exec_command,
633 .dev_select = ata_std_dev_select,
634
635 .freeze = ata_bmdma_freeze,
636 .thaw = ata_bmdma_thaw,
637 .error_handler = sis_66_error_handler,
638 .post_internal_cmd = ata_bmdma_post_internal_cmd,
639
640
641 .bmdma_setup = ata_bmdma_setup,
642 .bmdma_start = ata_bmdma_start,
643 .bmdma_stop = ata_bmdma_stop,
644 .bmdma_status = ata_bmdma_status,
645 .qc_prep = ata_qc_prep,
646 .qc_issue = ata_qc_issue_prot,
647 .data_xfer = ata_pio_data_xfer,
648
649 .eng_timeout = ata_eng_timeout,
650
651 .irq_handler = ata_interrupt,
652 .irq_clear = ata_bmdma_irq_clear,
653
654 .port_start = ata_port_start,
655 .port_stop = ata_port_stop,
656 .host_stop = ata_host_stop,
657};
658
659static const struct ata_port_operations sis_66_ops = {
660 .port_disable = ata_port_disable,
661 .set_piomode = sis_old_set_piomode,
662 .set_dmamode = sis_66_set_dmamode,
663 .mode_filter = ata_pci_default_filter,
664
665 .tf_load = ata_tf_load,
666 .tf_read = ata_tf_read,
667 .check_status = ata_check_status,
668 .exec_command = ata_exec_command,
669 .dev_select = ata_std_dev_select,
670
671 .freeze = ata_bmdma_freeze,
672 .thaw = ata_bmdma_thaw,
673 .error_handler = sis_66_error_handler,
674 .post_internal_cmd = ata_bmdma_post_internal_cmd,
675
676 .bmdma_setup = ata_bmdma_setup,
677 .bmdma_start = ata_bmdma_start,
678 .bmdma_stop = ata_bmdma_stop,
679 .bmdma_status = ata_bmdma_status,
680 .qc_prep = ata_qc_prep,
681 .qc_issue = ata_qc_issue_prot,
682 .data_xfer = ata_pio_data_xfer,
683
684 .eng_timeout = ata_eng_timeout,
685
686 .irq_handler = ata_interrupt,
687 .irq_clear = ata_bmdma_irq_clear,
688
689 .port_start = ata_port_start,
690 .port_stop = ata_port_stop,
691 .host_stop = ata_host_stop,
692};
693
694static const struct ata_port_operations sis_old_ops = {
695 .port_disable = ata_port_disable,
696 .set_piomode = sis_old_set_piomode,
697 .set_dmamode = sis_old_set_dmamode,
698 .mode_filter = ata_pci_default_filter,
699
700 .tf_load = ata_tf_load,
701 .tf_read = ata_tf_read,
702 .check_status = ata_check_status,
703 .exec_command = ata_exec_command,
704 .dev_select = ata_std_dev_select,
705
706 .freeze = ata_bmdma_freeze,
707 .thaw = ata_bmdma_thaw,
708 .error_handler = sis_old_error_handler,
709 .post_internal_cmd = ata_bmdma_post_internal_cmd,
710
711 .bmdma_setup = ata_bmdma_setup,
712 .bmdma_start = ata_bmdma_start,
713 .bmdma_stop = ata_bmdma_stop,
714 .bmdma_status = ata_bmdma_status,
715 .qc_prep = ata_qc_prep,
716 .qc_issue = ata_qc_issue_prot,
717 .data_xfer = ata_pio_data_xfer,
718
719 .eng_timeout = ata_eng_timeout,
720
721 .irq_handler = ata_interrupt,
722 .irq_clear = ata_bmdma_irq_clear,
723
724 .port_start = ata_port_start,
725 .port_stop = ata_port_stop,
726 .host_stop = ata_host_stop,
727};
728
729static struct ata_port_info sis_info = {
730 .sht = &sis_sht,
731 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
732 .pio_mask = 0x1f, /* pio0-4 */
733 .mwdma_mask = 0x07,
734 .udma_mask = 0,
735 .port_ops = &sis_old_ops,
736};
737static struct ata_port_info sis_info33 = {
738 .sht = &sis_sht,
739 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
740 .pio_mask = 0x1f, /* pio0-4 */
741 .mwdma_mask = 0x07,
742 .udma_mask = ATA_UDMA2, /* UDMA 33 */
743 .port_ops = &sis_old_ops,
744};
745static struct ata_port_info sis_info66 = {
746 .sht = &sis_sht,
747 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
748 .pio_mask = 0x1f, /* pio0-4 */
749 .udma_mask = ATA_UDMA4, /* UDMA 66 */
750 .port_ops = &sis_66_ops,
751};
752static struct ata_port_info sis_info100 = {
753 .sht = &sis_sht,
754 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
755 .pio_mask = 0x1f, /* pio0-4 */
756 .udma_mask = ATA_UDMA5,
757 .port_ops = &sis_100_ops,
758};
759static struct ata_port_info sis_info100_early = {
760 .sht = &sis_sht,
761 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
762 .udma_mask = ATA_UDMA5,
763 .pio_mask = 0x1f, /* pio0-4 */
764 .port_ops = &sis_66_ops,
765};
766static struct ata_port_info sis_info133 = {
767 .sht = &sis_sht,
768 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
769 .pio_mask = 0x1f, /* pio0-4 */
770 .udma_mask = ATA_UDMA6,
771 .port_ops = &sis_133_ops,
772};
773static struct ata_port_info sis_info133_early = {
774 .sht = &sis_sht,
775 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
776 .pio_mask = 0x1f, /* pio0-4 */
777 .udma_mask = ATA_UDMA6,
778 .port_ops = &sis_133_early_ops,
779};
780
781
782static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
783{
784 u16 regw;
785 u8 reg;
786
787 if (sis->info == &sis_info133) {
788 pci_read_config_word(pdev, 0x50, &regw);
789 if (regw & 0x08)
790 pci_write_config_word(pdev, 0x50, regw & ~0x08);
791 pci_read_config_word(pdev, 0x52, &regw);
792 if (regw & 0x08)
793 pci_write_config_word(pdev, 0x52, regw & ~0x08);
794 return;
795 }
796
797 if (sis->info == &sis_info133_early || sis->info == &sis_info100) {
798 /* Fix up latency */
799 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
800 /* Set compatibility bit */
801 pci_read_config_byte(pdev, 0x49, &reg);
802 if (!(reg & 0x01))
803 pci_write_config_byte(pdev, 0x49, reg | 0x01);
804 return;
805 }
806
807 if (sis->info == &sis_info66 || sis->info == &sis_info100_early) {
808 /* Fix up latency */
809 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
810 /* Set compatibility bit */
811 pci_read_config_byte(pdev, 0x52, &reg);
812 if (!(reg & 0x04))
813 pci_write_config_byte(pdev, 0x52, reg | 0x04);
814 return;
815 }
816
817 if (sis->info == &sis_info33) {
818 pci_read_config_byte(pdev, PCI_CLASS_PROG, &reg);
819 if (( reg & 0x0F ) != 0x00)
820 pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0);
821 /* Fall through to ATA16 fixup below */
822 }
823
824 if (sis->info == &sis_info || sis->info == &sis_info33) {
825 /* force per drive recovery and active timings
826 needed on ATA_33 and below chips */
827 pci_read_config_byte(pdev, 0x52, &reg);
828 if (!(reg & 0x08))
829 pci_write_config_byte(pdev, 0x52, reg|0x08);
830 return;
831 }
832
833 BUG();
834}
835
836/**
837 * sis_init_one - Register SiS ATA PCI device with kernel services
838 * @pdev: PCI device to register
839 * @ent: Entry in sis_pci_tbl matching with @pdev
840 *
841 * Called from kernel PCI layer. We probe for combined mode (sigh),
842 * and then hand over control to libata, for it to do the rest.
843 *
844 * LOCKING:
845 * Inherited from PCI layer (may sleep).
846 *
847 * RETURNS:
848 * Zero on success, or -ERRNO value.
849 */
850
851static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
852{
853 static int printed_version;
854 static struct ata_port_info *port_info[2];
855 struct ata_port_info *port;
856 struct pci_dev *host = NULL;
857 struct sis_chipset *chipset = NULL;
858
859 static struct sis_chipset sis_chipsets[] = {
860 { 0x0745, &sis_info100 },
861 { 0x0735, &sis_info100 },
862 { 0x0733, &sis_info100 },
863 { 0x0635, &sis_info100 },
864 { 0x0633, &sis_info100 },
865
866 { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */
867 { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */
868
869 { 0x0640, &sis_info66 },
870 { 0x0630, &sis_info66 },
871 { 0x0620, &sis_info66 },
872 { 0x0540, &sis_info66 },
873 { 0x0530, &sis_info66 },
874
875 { 0x5600, &sis_info33 },
876 { 0x5598, &sis_info33 },
877 { 0x5597, &sis_info33 },
878 { 0x5591, &sis_info33 },
879 { 0x5582, &sis_info33 },
880 { 0x5581, &sis_info33 },
881
882 { 0x5596, &sis_info },
883 { 0x5571, &sis_info },
884 { 0x5517, &sis_info },
885 { 0x5511, &sis_info },
886
887 {0}
888 };
889 static struct sis_chipset sis133_early = {
890 0x0, &sis_info133_early
891 };
892 static struct sis_chipset sis133 = {
893 0x0, &sis_info133
894 };
895 static struct sis_chipset sis100_early = {
896 0x0, &sis_info100_early
897 };
898 static struct sis_chipset sis100 = {
899 0x0, &sis_info100
900 };
901
902 if (!printed_version++)
903 dev_printk(KERN_DEBUG, &pdev->dev,
904 "version " DRV_VERSION "\n");
905
906 /* We have to find the bridge first */
907
908 for (chipset = &sis_chipsets[0]; chipset->device; chipset++) {
909 host = pci_get_device(PCI_VENDOR_ID_SI, chipset->device, NULL);
910 if (host != NULL) {
911 if (chipset->device == 0x630) { /* SIS630 */
912 u8 host_rev;
913 pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
914 if (host_rev >= 0x30) /* 630 ET */
915 chipset = &sis100_early;
916 }
917 break;
918 }
919 }
920
921 /* Look for concealed bridges */
922 if (host == NULL) {
923 /* Second check */
924 u32 idemisc;
925 u16 trueid;
926
927 /* Disable ID masking and register remapping then
928 see what the real ID is */
929
930 pci_read_config_dword(pdev, 0x54, &idemisc);
931 pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff);
932 pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid);
933 pci_write_config_dword(pdev, 0x54, idemisc);
934
935 switch(trueid) {
936 case 0x5518: /* SIS 962/963 */
937 chipset = &sis133;
938 if ((idemisc & 0x40000000) == 0) {
939 pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000);
940 printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
941 }
942 break;
943 case 0x0180: /* SIS 965/965L */
944 chipset = &sis133;
945 break;
946 case 0x1180: /* SIS 966/966L */
947 chipset = &sis133;
948 break;
949 }
950 }
951
952 /* Further check */
953 if (chipset == NULL) {
954 struct pci_dev *lpc_bridge;
955 u16 trueid;
956 u8 prefctl;
957 u8 idecfg;
958 u8 sbrev;
959
960 /* Try the second unmasking technique */
961 pci_read_config_byte(pdev, 0x4a, &idecfg);
962 pci_write_config_byte(pdev, 0x4a, idecfg | 0x10);
963 pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid);
964 pci_write_config_byte(pdev, 0x4a, idecfg);
965
966 switch(trueid) {
967 case 0x5517:
968 lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
969 if (lpc_bridge == NULL)
970 break;
971 pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
972 pci_read_config_byte(pdev, 0x49, &prefctl);
973 pci_dev_put(lpc_bridge);
974
975 if (sbrev == 0x10 && (prefctl & 0x80)) {
976 chipset = &sis133_early;
977 break;
978 }
979 chipset = &sis100;
980 break;
981 }
982 }
983 pci_dev_put(host);
984
985 /* No chipset info, no support */
986 if (chipset == NULL)
987 return -ENODEV;
988
989 port = chipset->info;
990 port->private_data = chipset;
991
992 sis_fixup(pdev, chipset);
993
994 port_info[0] = port_info[1] = port;
995 return ata_pci_init_one(pdev, port_info, 2);
996}
997
998static const struct pci_device_id sis_pci_tbl[] = {
999 { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5513), }, /* SiS 5513 */
1000 { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x5518), }, /* SiS 5518 */
1001 { }
1002};
1003
1004static struct pci_driver sis_pci_driver = {
1005 .name = DRV_NAME,
1006 .id_table = sis_pci_tbl,
1007 .probe = sis_init_one,
1008 .remove = ata_pci_remove_one,
1009};
1010
1011static int __init sis_init(void)
1012{
1013 return pci_register_driver(&sis_pci_driver);
1014}
1015
1016static void __exit sis_exit(void)
1017{
1018 pci_unregister_driver(&sis_pci_driver);
1019}
1020
1021
1022module_init(sis_init);
1023module_exit(sis_exit);
1024
1025MODULE_AUTHOR("Alan Cox");
1026MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA");
1027MODULE_LICENSE("GPL");
1028MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
1029MODULE_VERSION(DRV_VERSION);
1030
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-10 17:06:41 -0500