1 files changed, 6 insertions, 28 deletions

diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c6319cf50de4..c2988b0aa8ea 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.2.7"
 
 enum {
         READ_REG        = 0,    /* index of Read cycle timing register */
@@ -109,30 +109,6 @@ static void opti_write_reg(struct ata_port *ap, u8 val, int reg)
         outb(0x83, regio + 2);
 }
 
-#if 0
-/**
- *      opti_read_reg           -       control register read
- *      @ap: ATA port
- *      @reg: control register number
- *
- *      The Opti uses magic 'trapdoor' register accesses to do configuration
- *      rather than using PCI space as other controllers do. The double inw
- *      on the error register activates configuration mode. We can then read
- *      the control register
- */
-
-static u8 opti_read_reg(struct ata_port *ap, int reg)
-{
-        unsigned long regio = ap->ioaddr.cmd_addr;
-        u8 ret;
-        inw(regio + 1);
-        inw(regio + 1);
-        outb(3, regio + 2);
-        ret = inb(regio + reg);
-        outb(0x83, regio + 2);
-}
-#endif
-
 /**
  *      opti_set_piomode        -       set initial PIO mode data
  *      @ap: ATA interface
@@ -195,7 +171,6 @@ static struct scsi_host_template opti_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -204,12 +179,13 @@ static struct scsi_host_template opti_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations opti_port_ops = {
         .port_disable   = ata_port_disable,
         .set_piomode    = opti_set_piomode,
-/*      .set_dmamode    = opti_set_dmamode, */
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
         .check_status   = ata_check_status,
@@ -267,7 +243,9 @@ static struct pci_driver opti_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = opti,
         .probe          = opti_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init opti_init(void)