1 files changed, 108 insertions, 436 deletions

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 21efe92a7135..c561b3be4a97 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -56,10 +56,7 @@ u8 ata_irq_on(struct ata_port *ap)
         ap->ctl &= ~ATA_NIEN;
         ap->last_ctl = ap->ctl;
 
-        if (ap->flags & ATA_FLAG_MMIO)
-                writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
-        else
-                outb(ap->ctl, ioaddr->ctl_addr);
+        iowrite8(ap->ctl, ioaddr->ctl_addr);
         tmp = ata_wait_idle(ap);
 
         ap->ops->irq_clear(ap);
@@ -68,7 +65,7 @@ u8 ata_irq_on(struct ata_port *ap)
 }
 
 /**
- *      ata_tf_load_pio - send taskfile registers to host controller
+ *      ata_tf_load - send taskfile registers to host controller
  *      @ap: Port to which output is sent
  *      @tf: ATA taskfile register set
  *
@@ -78,81 +75,23 @@ u8 ata_irq_on(struct ata_port *ap)
  *      Inherited from caller.
  */
 
-static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
-{
-        struct ata_ioports *ioaddr = &ap->ioaddr;
-        unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
-        if (tf->ctl != ap->last_ctl) {
-                outb(tf->ctl, ioaddr->ctl_addr);
-                ap->last_ctl = tf->ctl;
-                ata_wait_idle(ap);
-        }
-
-        if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-                outb(tf->hob_feature, ioaddr->feature_addr);
-                outb(tf->hob_nsect, ioaddr->nsect_addr);
-                outb(tf->hob_lbal, ioaddr->lbal_addr);
-                outb(tf->hob_lbam, ioaddr->lbam_addr);
-                outb(tf->hob_lbah, ioaddr->lbah_addr);
-                VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
-                        tf->hob_feature,
-                        tf->hob_nsect,
-                        tf->hob_lbal,
-                        tf->hob_lbam,
-                        tf->hob_lbah);
-        }
-
-        if (is_addr) {
-                outb(tf->feature, ioaddr->feature_addr);
-                outb(tf->nsect, ioaddr->nsect_addr);
-                outb(tf->lbal, ioaddr->lbal_addr);
-                outb(tf->lbam, ioaddr->lbam_addr);
-                outb(tf->lbah, ioaddr->lbah_addr);
-                VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-                        tf->feature,
-                        tf->nsect,
-                        tf->lbal,
-                        tf->lbam,
-                        tf->lbah);
-        }
-
-        if (tf->flags & ATA_TFLAG_DEVICE) {
-                outb(tf->device, ioaddr->device_addr);
-                VPRINTK("device 0x%X\n", tf->device);
-        }
-
-        ata_wait_idle(ap);
-}
-
-/**
- *      ata_tf_load_mmio - send taskfile registers to host controller
- *      @ap: Port to which output is sent
- *      @tf: ATA taskfile register set
- *
- *      Outputs ATA taskfile to standard ATA host controller using MMIO.
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-
-static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
         struct ata_ioports *ioaddr = &ap->ioaddr;
         unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
 
         if (tf->ctl != ap->last_ctl) {
-                writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
+                iowrite8(tf->ctl, ioaddr->ctl_addr);
                 ap->last_ctl = tf->ctl;
                 ata_wait_idle(ap);
         }
 
         if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-                writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
-                writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
-                writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
-                writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
-                writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
+                iowrite8(tf->hob_feature, ioaddr->feature_addr);
+                iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+                iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+                iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+                iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
                 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
                         tf->hob_feature,
                         tf->hob_nsect,
@@ -162,11 +101,11 @@ static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
         }
 
         if (is_addr) {
-                writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
-                writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
-                writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
-                writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
-                writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+                iowrite8(tf->feature, ioaddr->feature_addr);
+                iowrite8(tf->nsect, ioaddr->nsect_addr);
+                iowrite8(tf->lbal, ioaddr->lbal_addr);
+                iowrite8(tf->lbam, ioaddr->lbam_addr);
+                iowrite8(tf->lbah, ioaddr->lbah_addr);
                 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
                         tf->feature,
                         tf->nsect,
@@ -176,108 +115,34 @@ static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
         }
 
         if (tf->flags & ATA_TFLAG_DEVICE) {
-                writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+                iowrite8(tf->device, ioaddr->device_addr);
                 VPRINTK("device 0x%X\n", tf->device);
         }
 
         ata_wait_idle(ap);
 }
 
-
-/**
- *      ata_tf_load - send taskfile registers to host controller
- *      @ap: Port to which output is sent
- *      @tf: ATA taskfile register set
- *
- *      Outputs ATA taskfile to standard ATA host controller using MMIO
- *      or PIO as indicated by the ATA_FLAG_MMIO flag.
- *      Writes the control, feature, nsect, lbal, lbam, and lbah registers.
- *      Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
- *      hob_lbal, hob_lbam, and hob_lbah.
- *
- *      This function waits for idle (!BUSY and !DRQ) after writing
- *      registers.  If the control register has a new value, this
- *      function also waits for idle after writing control and before
- *      writing the remaining registers.
- *
- *      May be used as the tf_load() entry in ata_port_operations.
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
-{
-        if (ap->flags & ATA_FLAG_MMIO)
-                ata_tf_load_mmio(ap, tf);
-        else
-                ata_tf_load_pio(ap, tf);
-}
-
-/**
- *      ata_exec_command_pio - issue ATA command to host controller
- *      @ap: port to which command is being issued
- *      @tf: ATA taskfile register set
- *
- *      Issues PIO write to ATA command register, with proper
- *      synchronization with interrupt handler / other threads.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-
-static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
-{
-        DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
-
-        outb(tf->command, ap->ioaddr.command_addr);
-        ata_pause(ap);
-}
-
-
 /**
- *      ata_exec_command_mmio - issue ATA command to host controller
+ *      ata_exec_command - issue ATA command to host controller
  *      @ap: port to which command is being issued
  *      @tf: ATA taskfile register set
  *
- *      Issues MMIO write to ATA command register, with proper
- *      synchronization with interrupt handler / other threads.
- *
- *      FIXME: missing write posting for 400nS delay enforcement
+ *      Issues ATA command, with proper synchronization with interrupt
+ *      handler / other threads.
  *
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
-static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 {
         DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
 
-        writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr);
+        iowrite8(tf->command, ap->ioaddr.command_addr);
         ata_pause(ap);
 }
 
-
-/**
- *      ata_exec_command - issue ATA command to host controller
- *      @ap: port to which command is being issued
- *      @tf: ATA taskfile register set
- *
- *      Issues PIO/MMIO write to ATA command register, with proper
- *      synchronization with interrupt handler / other threads.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
-{
-        if (ap->flags & ATA_FLAG_MMIO)
-                ata_exec_command_mmio(ap, tf);
-        else
-                ata_exec_command_pio(ap, tf);
-}
-
 /**
- *      ata_tf_read_pio - input device's ATA taskfile shadow registers
+ *      ata_tf_read - input device's ATA taskfile shadow registers
  *      @ap: Port from which input is read
  *      @tf: ATA taskfile register set for storing input
  *
@@ -287,121 +152,28 @@ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
  *      LOCKING:
  *      Inherited from caller.
  */
-
-static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
-{
-        struct ata_ioports *ioaddr = &ap->ioaddr;
-
-        tf->command = ata_check_status(ap);
-        tf->feature = inb(ioaddr->error_addr);
-        tf->nsect = inb(ioaddr->nsect_addr);
-        tf->lbal = inb(ioaddr->lbal_addr);
-        tf->lbam = inb(ioaddr->lbam_addr);
-        tf->lbah = inb(ioaddr->lbah_addr);
-        tf->device = inb(ioaddr->device_addr);
-
-        if (tf->flags & ATA_TFLAG_LBA48) {
-                outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
-                tf->hob_feature = inb(ioaddr->error_addr);
-                tf->hob_nsect = inb(ioaddr->nsect_addr);
-                tf->hob_lbal = inb(ioaddr->lbal_addr);
-                tf->hob_lbam = inb(ioaddr->lbam_addr);
-                tf->hob_lbah = inb(ioaddr->lbah_addr);
-        }
-}
-
-/**
- *      ata_tf_read_mmio - input device's ATA taskfile shadow registers
- *      @ap: Port from which input is read
- *      @tf: ATA taskfile register set for storing input
- *
- *      Reads ATA taskfile registers for currently-selected device
- *      into @tf via MMIO.
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-
-static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
         struct ata_ioports *ioaddr = &ap->ioaddr;
 
         tf->command = ata_check_status(ap);
-        tf->feature = readb((void __iomem *)ioaddr->error_addr);
-        tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
-        tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
-        tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
-        tf->lbah = readb((void __iomem *)ioaddr->lbah_addr);
-        tf->device = readb((void __iomem *)ioaddr->device_addr);
+        tf->feature = ioread8(ioaddr->error_addr);
+        tf->nsect = ioread8(ioaddr->nsect_addr);
+        tf->lbal = ioread8(ioaddr->lbal_addr);
+        tf->lbam = ioread8(ioaddr->lbam_addr);
+        tf->lbah = ioread8(ioaddr->lbah_addr);
+        tf->device = ioread8(ioaddr->device_addr);
 
         if (tf->flags & ATA_TFLAG_LBA48) {
-                writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr);
-                tf->hob_feature = readb((void __iomem *)ioaddr->error_addr);
-                tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr);
-                tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr);
-                tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr);
-                tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr);
+                iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+                tf->hob_feature = ioread8(ioaddr->error_addr);
+                tf->hob_nsect = ioread8(ioaddr->nsect_addr);
+                tf->hob_lbal = ioread8(ioaddr->lbal_addr);
+                tf->hob_lbam = ioread8(ioaddr->lbam_addr);
+                tf->hob_lbah = ioread8(ioaddr->lbah_addr);
         }
 }
 
-
-/**
- *      ata_tf_read - input device's ATA taskfile shadow registers
- *      @ap: Port from which input is read
- *      @tf: ATA taskfile register set for storing input
- *
- *      Reads ATA taskfile registers for currently-selected device
- *      into @tf.
- *
- *      Reads nsect, lbal, lbam, lbah, and device.  If ATA_TFLAG_LBA48
- *      is set, also reads the hob registers.
- *
- *      May be used as the tf_read() entry in ata_port_operations.
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
-        if (ap->flags & ATA_FLAG_MMIO)
-                ata_tf_read_mmio(ap, tf);
-        else
-                ata_tf_read_pio(ap, tf);
-}
-
-/**
- *      ata_check_status_pio - Read device status reg & clear interrupt
- *      @ap: port where the device is
- *
- *      Reads ATA taskfile status register for currently-selected device
- *      and return its value. This also clears pending interrupts
- *      from this device
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-static u8 ata_check_status_pio(struct ata_port *ap)
-{
-        return inb(ap->ioaddr.status_addr);
-}
-
-/**
- *      ata_check_status_mmio - Read device status reg & clear interrupt
- *      @ap: port where the device is
- *
- *      Reads ATA taskfile status register for currently-selected device
- *      via MMIO and return its value. This also clears pending interrupts
- *      from this device
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-static u8 ata_check_status_mmio(struct ata_port *ap)
-{
-        return readb((void __iomem *) ap->ioaddr.status_addr);
-}
-
-
 /**
  *      ata_check_status - Read device status reg & clear interrupt
  *      @ap: port where the device is
@@ -410,19 +182,14 @@ static u8 ata_check_status_mmio(struct ata_port *ap)
  *      and return its value. This also clears pending interrupts
  *      from this device
  *
- *      May be used as the check_status() entry in ata_port_operations.
- *
  *      LOCKING:
  *      Inherited from caller.
  */
 u8 ata_check_status(struct ata_port *ap)
 {
-        if (ap->flags & ATA_FLAG_MMIO)
-                return ata_check_status_mmio(ap);
-        return ata_check_status_pio(ap);
+        return ioread8(ap->ioaddr.status_addr);
 }
 
-
 /**
  *      ata_altstatus - Read device alternate status reg
  *      @ap: port where the device is
@@ -441,58 +208,52 @@ u8 ata_altstatus(struct ata_port *ap)
         if (ap->ops->check_altstatus)
                 return ap->ops->check_altstatus(ap);
 
-        if (ap->flags & ATA_FLAG_MMIO)
-                return readb((void __iomem *)ap->ioaddr.altstatus_addr);
-        return inb(ap->ioaddr.altstatus_addr);
+        return ioread8(ap->ioaddr.altstatus_addr);
 }
 
 /**
- *      ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
+ *      ata_bmdma_setup - Set up PCI IDE BMDMA transaction
  *      @qc: Info associated with this ATA transaction.
  *
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
-static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+void ata_bmdma_setup(struct ata_queued_cmd *qc)
 {
         struct ata_port *ap = qc->ap;
         unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
         u8 dmactl;
-        void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
 
         /* load PRD table addr. */
         mb();   /* make sure PRD table writes are visible to controller */
-        writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
+        iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
 
         /* specify data direction, triple-check start bit is clear */
-        dmactl = readb(mmio + ATA_DMA_CMD);
+        dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
         dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
         if (!rw)
                 dmactl |= ATA_DMA_WR;
-        writeb(dmactl, mmio + ATA_DMA_CMD);
+        iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 
         /* issue r/w command */
         ap->ops->exec_command(ap, &qc->tf);
 }
 
 /**
- *      ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
+ *      ata_bmdma_start - Start a PCI IDE BMDMA transaction
  *      @qc: Info associated with this ATA transaction.
  *
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
-static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
+void ata_bmdma_start (struct ata_queued_cmd *qc)
 {
         struct ata_port *ap = qc->ap;
-        void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
         u8 dmactl;
 
         /* start host DMA transaction */
-        dmactl = readb(mmio + ATA_DMA_CMD);
-        writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
+        dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+        iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 
         /* Strictly, one may wish to issue a readb() here, to
          * flush the mmio write.  However, control also passes
@@ -508,96 +269,6 @@ static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
 }
 
 /**
- *      ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO)
- *      @qc: Info associated with this ATA transaction.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-
-static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc)
-{
-        struct ata_port *ap = qc->ap;
-        unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
-        u8 dmactl;
-
-        /* load PRD table addr. */
-        outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
-        /* specify data direction, triple-check start bit is clear */
-        dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-        dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
-        if (!rw)
-                dmactl |= ATA_DMA_WR;
-        outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-        /* issue r/w command */
-        ap->ops->exec_command(ap, &qc->tf);
-}
-
-/**
- *      ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO)
- *      @qc: Info associated with this ATA transaction.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-
-static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
-{
-        struct ata_port *ap = qc->ap;
-        u8 dmactl;
-
-        /* start host DMA transaction */
-        dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-        outb(dmactl | ATA_DMA_START,
-             ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-}
-
-
-/**
- *      ata_bmdma_start - Start a PCI IDE BMDMA transaction
- *      @qc: Info associated with this ATA transaction.
- *
- *      Writes the ATA_DMA_START flag to the DMA command register.
- *
- *      May be used as the bmdma_start() entry in ata_port_operations.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-void ata_bmdma_start(struct ata_queued_cmd *qc)
-{
-        if (qc->ap->flags & ATA_FLAG_MMIO)
-                ata_bmdma_start_mmio(qc);
-        else
-                ata_bmdma_start_pio(qc);
-}
-
-
-/**
- *      ata_bmdma_setup - Set up PCI IDE BMDMA transaction
- *      @qc: Info associated with this ATA transaction.
- *
- *      Writes address of PRD table to device's PRD Table Address
- *      register, sets the DMA control register, and calls
- *      ops->exec_command() to start the transfer.
- *
- *      May be used as the bmdma_setup() entry in ata_port_operations.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-void ata_bmdma_setup(struct ata_queued_cmd *qc)
-{
-        if (qc->ap->flags & ATA_FLAG_MMIO)
-                ata_bmdma_setup_mmio(qc);
-        else
-                ata_bmdma_setup_pio(qc);
-}
-
-
-/**
  *      ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
  *      @ap: Port associated with this ATA transaction.
  *
@@ -608,23 +279,16 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
 void ata_bmdma_irq_clear(struct ata_port *ap)
 {
-        if (!ap->ioaddr.bmdma_addr)
+        void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+        if (!mmio)
                 return;
 
-        if (ap->flags & ATA_FLAG_MMIO) {
-                void __iomem *mmio =
-                      ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
-                writeb(readb(mmio), mmio);
-        } else {
-                unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
-                outb(inb(addr), addr);
-        }
+        iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
 }
 
-
 /**
  *      ata_bmdma_status - Read PCI IDE BMDMA status
  *      @ap: Port associated with this ATA transaction.
@@ -636,19 +300,11 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
 u8 ata_bmdma_status(struct ata_port *ap)
 {
-        u8 host_stat;
-        if (ap->flags & ATA_FLAG_MMIO) {
-                void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-                host_stat = readb(mmio + ATA_DMA_STATUS);
-        } else
-                host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-        return host_stat;
+        return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 }
 
-
 /**
  *      ata_bmdma_stop - Stop PCI IDE BMDMA transfer
  *      @qc: Command we are ending DMA for
@@ -660,21 +316,14 @@ u8 ata_bmdma_status(struct ata_port *ap)
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
 void ata_bmdma_stop(struct ata_queued_cmd *qc)
 {
         struct ata_port *ap = qc->ap;
-        if (ap->flags & ATA_FLAG_MMIO) {
-                void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+        void __iomem *mmio = ap->ioaddr.bmdma_addr;
 
-                /* clear start/stop bit */
-                writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
-                        mmio + ATA_DMA_CMD);
-        } else {
-                /* clear start/stop bit */
-                outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
-                        ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-        }
+        /* clear start/stop bit */
+        iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+                 mmio + ATA_DMA_CMD);
 
         /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
         ata_altstatus(ap);        /* dummy read */
@@ -696,10 +345,7 @@ void ata_bmdma_freeze(struct ata_port *ap)
         ap->ctl |= ATA_NIEN;
         ap->last_ctl = ap->ctl;
 
-        if (ap->flags & ATA_FLAG_MMIO)
-                writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr);
-        else
-                outb(ap->ctl, ioaddr->ctl_addr);
+        iowrite8(ap->ctl, ioaddr->ctl_addr);
 
         /* Under certain circumstances, some controllers raise IRQ on
          * ATA_NIEN manipulation.  Also, many controllers fail to mask
@@ -868,11 +514,24 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
 {
-        struct ata_probe_ent *probe_ent =
-                ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
-        int p = 0;
-        unsigned long bmdma;
+        struct ata_probe_ent *probe_ent;
+        int i, p = 0;
+        void __iomem * const *iomap;
+
+        /* iomap BARs */
+        for (i = 0; i < 4; i++) {
+                if (pcim_iomap(pdev, i, 0) == NULL) {
+                        dev_printk(KERN_ERR, &pdev->dev,
+                                   "failed to iomap PCI BAR %d\n", i);
+                        return NULL;
+                }
+        }
+
+        pcim_iomap(pdev, 4, 0); /* may fail */
+        iomap = pcim_iomap_table(pdev);
 
+        /* alloc and init probe_ent */
+        probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
         if (!probe_ent)
                 return NULL;
 
@@ -887,33 +546,30 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
                 ports &= ~ATA_PORT_SECONDARY;
 
         if (ports & ATA_PORT_PRIMARY) {
-                probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+                probe_ent->port[p].cmd_addr = iomap[0];
                 probe_ent->port[p].altstatus_addr =
-                probe_ent->port[p].ctl_addr =
-                        pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
-                bmdma = pci_resource_start(pdev, 4);
-                if (bmdma) {
+                probe_ent->port[p].ctl_addr = (void __iomem *)
+                        ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS);
+                if (iomap[4]) {
                         if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-                            (inb(bmdma + 2) & 0x80))
+                            (ioread8(iomap[4] + 2) & 0x80))
                                 probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-                        probe_ent->port[p].bmdma_addr = bmdma;
+                        probe_ent->port[p].bmdma_addr = iomap[4];
                 }
                 ata_std_ports(&probe_ent->port[p]);
                 p++;
         }
 
         if (ports & ATA_PORT_SECONDARY) {
-                probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+                probe_ent->port[p].cmd_addr = iomap[2];
                 probe_ent->port[p].altstatus_addr =
-                probe_ent->port[p].ctl_addr =
-                        pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
-                bmdma = pci_resource_start(pdev, 4);
-                if (bmdma) {
-                        bmdma += 8;
+                probe_ent->port[p].ctl_addr = (void __iomem *)
+                        ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS);
+                if (iomap[4]) {
                         if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-                            (inb(bmdma + 2) & 0x80))
+                            (ioread8(iomap[4] + 10) & 0x80))
                                 probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-                        probe_ent->port[p].bmdma_addr = bmdma;
+                        probe_ent->port[p].bmdma_addr = iomap[4] + 8;
                 }
                 ata_std_ports(&probe_ent->port[p]);
                 probe_ent->pinfo2 = port[1];
@@ -924,13 +580,29 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
         return probe_ent;
 }
 
-
 static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
                                 struct ata_port_info **port, int port_mask)
 {
         struct ata_probe_ent *probe_ent;
-        unsigned long bmdma = pci_resource_start(pdev, 4);
+        void __iomem *iomap[5] = { }, *bmdma;
+
+        if (port_mask & ATA_PORT_PRIMARY) {
+                iomap[0] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CMD, 8);
+                iomap[1] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CTL, 1);
+                if (!iomap[0] || !iomap[1])
+                        return NULL;
+        }
+
+        if (port_mask & ATA_PORT_SECONDARY) {
+                iomap[2] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CMD, 8);
+                iomap[3] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CTL, 1);
+                if (!iomap[2] || !iomap[3])
+                        return NULL;
+        }
+
+        bmdma = pcim_iomap(pdev, 4, 16); /* may fail */
 
+        /* alloc and init probe_ent */
         probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
         if (!probe_ent)
                 return NULL;
@@ -940,13 +612,13 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
 
         if (port_mask & ATA_PORT_PRIMARY) {
                 probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
-                probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
+                probe_ent->port[0].cmd_addr = iomap[0];
                 probe_ent->port[0].altstatus_addr =
-                probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
+                probe_ent->port[0].ctl_addr = iomap[1];
                 if (bmdma) {
                         probe_ent->port[0].bmdma_addr = bmdma;
                         if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-                            (inb(bmdma + 2) & 0x80))
+                            (ioread8(bmdma + 2) & 0x80))
                                 probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
                 }
                 ata_std_ports(&probe_ent->port[0]);
@@ -958,13 +630,13 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
                         probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
                 else
                         probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
-                probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
+                probe_ent->port[1].cmd_addr = iomap[2];
                 probe_ent->port[1].altstatus_addr =
-                probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
+                probe_ent->port[1].ctl_addr = iomap[3];
                 if (bmdma) {
                         probe_ent->port[1].bmdma_addr = bmdma + 8;
                         if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-                            (inb(bmdma + 10) & 0x80))
+                            (ioread8(bmdma + 10) & 0x80))
                                 probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
                 }
                 ata_std_ports(&probe_ent->port[1]);