1 files changed, 0 insertions, 40 deletions

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index dd528dbd9ccf..ccef99a0337c 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -64,46 +64,6 @@ u8 ata_irq_on(struct ata_port *ap)
         return tmp;
 }
 
-u8 ata_dummy_irq_on (struct ata_port *ap)       { return 0; }
-
-/**
- *      ata_irq_ack - Acknowledge a device interrupt.
- *      @ap: Port on which interrupts are enabled.
- *
- *      Wait up to 10 ms for legacy IDE device to become idle (BUSY
- *      or BUSY+DRQ clear).  Obtain dma status and port status from
- *      device.  Clear the interrupt.  Return port status.
- *
- *      LOCKING:
- */
-
-u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
-{
-        unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
-        u8 host_stat = 0, post_stat = 0, status;
-
-        status = ata_busy_wait(ap, bits, 1000);
-        if (status & bits)
-                if (ata_msg_err(ap))
-                        printk(KERN_ERR "abnormal status 0x%X\n", status);
-
-        if (ap->ioaddr.bmdma_addr) {
-                /* get controller status; clear intr, err bits */
-                host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-                iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR,
-                         ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-
-                post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-        }
-        if (ata_msg_intr(ap))
-                printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
-                        __FUNCTION__,
-                        host_stat, post_stat, status);
-        return status;
-}
-
-u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq) { return 0; }
-
 /**
  *      ata_tf_load - send taskfile registers to host controller
  *      @ap: Port to which output is sent