1 files changed, 24 insertions, 6 deletions

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 573158a9668d..7107a6929deb 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -32,6 +32,11 @@
  *      A generic parallel ATA driver using libata
  */
 
+enum {
+        ATA_GEN_CLASS_MATCH             = (1 << 0),
+        ATA_GEN_FORCE_DMA               = (1 << 1),
+};
+
 /**
  *      generic_set_mode        -       mode setting
  *      @link: link to set up
@@ -46,13 +51,17 @@
 static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 {
         struct ata_port *ap = link->ap;
+        const struct pci_device_id *id = ap->host->private_data;
         int dma_enabled = 0;
         struct ata_device *dev;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-        /* Bits 5 and 6 indicate if DMA is active on master/slave */
-        if (ap->ioaddr.bmdma_addr)
+        if (id->driver_data & ATA_GEN_FORCE_DMA) {
+                dma_enabled = 0xff;
+        } else if (ap->ioaddr.bmdma_addr) {
+                /* Bits 5 and 6 indicate if DMA is active on master/slave */
                 dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+        }
 
         if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
                 dma_enabled = 0xFF;
@@ -126,7 +135,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
         const struct ata_port_info *ppi[] = { &info, NULL };
 
         /* Don't use the generic entry unless instructed to do so */
-        if (id->driver_data == 1 && all_generic_ide == 0)
+        if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
                 return -ENODEV;
 
         /* Devices that need care */
@@ -155,7 +164,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
                         return rc;
                 pcim_pin_device(dev);
         }
-        return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0);
+        return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, (void *)id, 0);
 }
 
 static struct pci_device_id ata_generic[] = {
@@ -167,7 +176,15 @@ static struct pci_device_id ata_generic[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_HINT,   PCI_DEVICE_ID_HINT_VXPROII_IDE), },
         { PCI_DEVICE(PCI_VENDOR_ID_VIA,    PCI_DEVICE_ID_VIA_82C561), },
         { PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
-        { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
+        { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE),
+          .driver_data = ATA_GEN_FORCE_DMA },
+        /*
+         * For some reason, MCP89 on MacBook 7,1 doesn't work with
+         * ahci, use ata_generic instead.
+         */
+        { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA,
+          PCI_VENDOR_ID_APPLE, 0xcb89,
+          .driver_data = ATA_GEN_FORCE_DMA },
 #if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
         { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
         { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
@@ -175,7 +192,8 @@ static struct pci_device_id ata_generic[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5),  },
 #endif  
         /* Must come last. If you add entries adjust this table appropriately */
-        { PCI_ANY_ID,           PCI_ANY_ID,                        PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
+        { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
+          .driver_data = ATA_GEN_CLASS_MATCH },
         { 0, },
 };