2 files changed, 85 insertions, 25 deletions

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 11acaee14d66..bf79d83bdfbb 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -384,6 +384,27 @@ acpi_pci_free_irq(struct acpi_prt_entry *entry,
         return irq;
 }
 
+#ifdef CONFIG_X86_IO_APIC
+extern int noioapicquirk;
+
+static int bridge_has_boot_interrupt_variant(struct pci_bus *bus)
+{
+        struct pci_bus *bus_it;
+
+        for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
+                if (!bus_it->self)
+                        return 0;
+
+                printk(KERN_INFO "vendor=%04x device=%04x\n", bus_it->self->vendor,
+                                bus_it->self->device);
+
+                if (bus_it->self->irq_reroute_variant)
+                        return bus_it->self->irq_reroute_variant;
+        }
+        return 0;
+}
+#endif /* CONFIG_X86_IO_APIC */
+
 /*
  * acpi_pci_irq_lookup
  * success: return IRQ >= 0
@@ -413,6 +434,41 @@ acpi_pci_irq_lookup(struct pci_bus *bus,
         }
 
         ret = func(entry, triggering, polarity, link);
+
+#ifdef CONFIG_X86_IO_APIC
+        /*
+         * Some chipsets (e.g. intel 6700PXH) generate a legacy INTx when the
+         * IRQ entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel
+         * does during interrupt handling). When this INTx generation cannot be
+         * disabled, we reroute these interrupts to their legacy equivalent to
+         * get rid of spurious interrupts.
+         */
+        if (!noioapicquirk) {
+                switch (bridge_has_boot_interrupt_variant(bus)) {
+                case 0:
+                        /* no rerouting necessary */
+                        break;
+
+                case INTEL_IRQ_REROUTE_VARIANT:
+                        /*
+                         * Remap according to INTx routing table in 6700PXH
+                         * specs, intel order number 302628-002, section
+                         * 2.15.2. Other chipsets (80332, ...) have the same
+                         * mapping and are handled here as well.
+                         */
+                        printk(KERN_INFO "pci irq %d -> rerouted to legacy "
+                                         "irq %d\n", ret, (ret % 4) + 16);
+                        ret = (ret % 4) + 16;
+                        break;
+
+                default:
+                        printk(KERN_INFO "not rerouting irq %d to legacy irq: "
+                                         "unknown mapping\n", ret);
+                        break;
+                }
+        }
+#endif /* CONFIG_X86_IO_APIC */
+
         return ret;
 }
 
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 25f531d892de..40e60fc2e596 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void)
                         toshiba_acpi_exit();
                         return -ENOMEM;
                 }
-        }
 
-        /* Register input device for kill switch */
-        toshiba_acpi.poll_dev = input_allocate_polled_device();
-        if (!toshiba_acpi.poll_dev) {
-                printk(MY_ERR "unable to allocate kill-switch input device\n");
-                toshiba_acpi_exit();
-                return -ENOMEM;
-        }
-        toshiba_acpi.poll_dev->private = &toshiba_acpi;
-        toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-        toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-        toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-        toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-        toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-        set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-        set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-        input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-        input_sync(toshiba_acpi.poll_dev->input);
-
-        ret = input_register_polled_device(toshiba_acpi.poll_dev);
-        if (ret) {
-                printk(MY_ERR "unable to register kill-switch input device\n");
-                toshiba_acpi_exit();
-                return ret;
+                /* Register input device for kill switch */
+                toshiba_acpi.poll_dev = input_allocate_polled_device();
+                if (!toshiba_acpi.poll_dev) {
+                        printk(MY_ERR
+                               "unable to allocate kill-switch input device\n");
+                        toshiba_acpi_exit();
+                        return -ENOMEM;
+                }
+                toshiba_acpi.poll_dev->private = &toshiba_acpi;
+                toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+                toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+                toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+                toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+                /* Toshiba USB ID */
+                toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+                set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+                set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+                input_report_switch(toshiba_acpi.poll_dev->input,
+                                    SW_RFKILL_ALL, TRUE);
+                input_sync(toshiba_acpi.poll_dev->input);
+
+                ret = input_register_polled_device(toshiba_acpi.poll_dev);
+                if (ret) {
+                        printk(MY_ERR
+                               "unable to register kill-switch input device\n");
+                        toshiba_acpi_exit();
+                        return ret;
+                }
         }
 
         return 0;