aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/acpi/utilities/utmisc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/utilities/utmisc.c')
-rw-r--r--drivers/acpi/utilities/utmisc.c1516
1 files changed, 1516 insertions, 0 deletions
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
new file mode 100644
index 000000000000..f6598547389b
--- /dev/null
+++ b/drivers/acpi/utilities/utmisc.c
@@ -0,0 +1,1516 @@
1/*******************************************************************************
2 *
3 * Module Name: utmisc - common utility procedures
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2005, R. Byron Moore
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44
45#include <acpi/acpi.h>
46#include <acpi/acnamesp.h>
47
48
49#define _COMPONENT ACPI_UTILITIES
50 ACPI_MODULE_NAME ("utmisc")
51
52
53/*******************************************************************************
54 *
55 * FUNCTION: acpi_ut_print_string
56 *
57 * PARAMETERS: String - Null terminated ASCII string
58 *
59 * RETURN: None
60 *
61 * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
62 * sequences.
63 *
64 ******************************************************************************/
65
66void
67acpi_ut_print_string (
68 char *string,
69 u8 max_length)
70{
71 u32 i;
72
73
74 if (!string) {
75 acpi_os_printf ("<\"NULL STRING PTR\">");
76 return;
77 }
78
79 acpi_os_printf ("\"");
80 for (i = 0; string[i] && (i < max_length); i++) {
81 /* Escape sequences */
82
83 switch (string[i]) {
84 case 0x07:
85 acpi_os_printf ("\\a"); /* BELL */
86 break;
87
88 case 0x08:
89 acpi_os_printf ("\\b"); /* BACKSPACE */
90 break;
91
92 case 0x0C:
93 acpi_os_printf ("\\f"); /* FORMFEED */
94 break;
95
96 case 0x0A:
97 acpi_os_printf ("\\n"); /* LINEFEED */
98 break;
99
100 case 0x0D:
101 acpi_os_printf ("\\r"); /* CARRIAGE RETURN*/
102 break;
103
104 case 0x09:
105 acpi_os_printf ("\\t"); /* HORIZONTAL TAB */
106 break;
107
108 case 0x0B:
109 acpi_os_printf ("\\v"); /* VERTICAL TAB */
110 break;
111
112 case '\'': /* Single Quote */
113 case '\"': /* Double Quote */
114 case '\\': /* Backslash */
115 acpi_os_printf ("\\%c", (int) string[i]);
116 break;
117
118 default:
119
120 /* Check for printable character or hex escape */
121
122 if (ACPI_IS_PRINT (string[i]))
123 {
124 /* This is a normal character */
125
126 acpi_os_printf ("%c", (int) string[i]);
127 }
128 else
129 {
130 /* All others will be Hex escapes */
131
132 acpi_os_printf ("\\x%2.2X", (s32) string[i]);
133 }
134 break;
135 }
136 }
137 acpi_os_printf ("\"");
138
139 if (i == max_length && string[i]) {
140 acpi_os_printf ("...");
141 }
142}
143
144
145/*******************************************************************************
146 *
147 * FUNCTION: acpi_ut_dword_byte_swap
148 *
149 * PARAMETERS: Value - Value to be converted
150 *
151 * DESCRIPTION: Convert a 32-bit value to big-endian (swap the bytes)
152 *
153 ******************************************************************************/
154
155u32
156acpi_ut_dword_byte_swap (
157 u32 value)
158{
159 union {
160 u32 value;
161 u8 bytes[4];
162 } out;
163
164 union {
165 u32 value;
166 u8 bytes[4];
167 } in;
168
169
170 ACPI_FUNCTION_ENTRY ();
171
172
173 in.value = value;
174
175 out.bytes[0] = in.bytes[3];
176 out.bytes[1] = in.bytes[2];
177 out.bytes[2] = in.bytes[1];
178 out.bytes[3] = in.bytes[0];
179
180 return (out.value);
181}
182
183
184/*******************************************************************************
185 *
186 * FUNCTION: acpi_ut_set_integer_width
187 *
188 * PARAMETERS: Revision From DSDT header
189 *
190 * RETURN: None
191 *
192 * DESCRIPTION: Set the global integer bit width based upon the revision
193 * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
194 * For Revision 2 and above, Integers are 64 bits. Yes, this
195 * makes a difference.
196 *
197 ******************************************************************************/
198
199void
200acpi_ut_set_integer_width (
201 u8 revision)
202{
203
204 if (revision <= 1) {
205 acpi_gbl_integer_bit_width = 32;
206 acpi_gbl_integer_nybble_width = 8;
207 acpi_gbl_integer_byte_width = 4;
208 }
209 else {
210 acpi_gbl_integer_bit_width = 64;
211 acpi_gbl_integer_nybble_width = 16;
212 acpi_gbl_integer_byte_width = 8;
213 }
214}
215
216
217#ifdef ACPI_DEBUG_OUTPUT
218/*******************************************************************************
219 *
220 * FUNCTION: acpi_ut_display_init_pathname
221 *
222 * PARAMETERS: obj_handle - Handle whose pathname will be displayed
223 * Path - Additional path string to be appended.
224 * (NULL if no extra path)
225 *
226 * RETURN: acpi_status
227 *
228 * DESCRIPTION: Display full pathname of an object, DEBUG ONLY
229 *
230 ******************************************************************************/
231
232void
233acpi_ut_display_init_pathname (
234 u8 type,
235 struct acpi_namespace_node *obj_handle,
236 char *path)
237{
238 acpi_status status;
239 struct acpi_buffer buffer;
240
241
242 ACPI_FUNCTION_ENTRY ();
243
244
245 /* Only print the path if the appropriate debug level is enabled */
246
247 if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
248 return;
249 }
250
251 /* Get the full pathname to the node */
252
253 buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
254 status = acpi_ns_handle_to_pathname (obj_handle, &buffer);
255 if (ACPI_FAILURE (status)) {
256 return;
257 }
258
259 /* Print what we're doing */
260
261 switch (type) {
262 case ACPI_TYPE_METHOD:
263 acpi_os_printf ("Executing ");
264 break;
265
266 default:
267 acpi_os_printf ("Initializing ");
268 break;
269 }
270
271 /* Print the object type and pathname */
272
273 acpi_os_printf ("%-12s %s", acpi_ut_get_type_name (type), (char *) buffer.pointer);
274
275 /* Extra path is used to append names like _STA, _INI, etc. */
276
277 if (path) {
278 acpi_os_printf (".%s", path);
279 }
280 acpi_os_printf ("\n");
281
282 ACPI_MEM_FREE (buffer.pointer);
283}
284#endif
285
286
287/*******************************************************************************
288 *
289 * FUNCTION: acpi_ut_valid_acpi_name
290 *
291 * PARAMETERS: Character - The character to be examined
292 *
293 * RETURN: 1 if Character may appear in a name, else 0
294 *
295 * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
296 * 1) Upper case alpha
297 * 2) numeric
298 * 3) underscore
299 *
300 ******************************************************************************/
301
302u8
303acpi_ut_valid_acpi_name (
304 u32 name)
305{
306 char *name_ptr = (char *) &name;
307 char character;
308 acpi_native_uint i;
309
310
311 ACPI_FUNCTION_ENTRY ();
312
313
314 for (i = 0; i < ACPI_NAME_SIZE; i++) {
315 character = *name_ptr;
316 name_ptr++;
317
318 if (!((character == '_') ||
319 (character >= 'A' && character <= 'Z') ||
320 (character >= '0' && character <= '9'))) {
321 return (FALSE);
322 }
323 }
324
325 return (TRUE);
326}
327
328
329/*******************************************************************************
330 *
331 * FUNCTION: acpi_ut_valid_acpi_character
332 *
333 * PARAMETERS: Character - The character to be examined
334 *
335 * RETURN: 1 if Character may appear in a name, else 0
336 *
337 * DESCRIPTION: Check for a printable character
338 *
339 ******************************************************************************/
340
341u8
342acpi_ut_valid_acpi_character (
343 char character)
344{
345
346 ACPI_FUNCTION_ENTRY ();
347
348 return ((u8) ((character == '_') ||
349 (character >= 'A' && character <= 'Z') ||
350 (character >= '0' && character <= '9')));
351}
352
353
354/*******************************************************************************
355 *
356 * FUNCTION: acpi_ut_strtoul64
357 *
358 * PARAMETERS: String - Null terminated string
359 * Base - Radix of the string: 10, 16, or ACPI_ANY_BASE
360 * ret_integer - Where the converted integer is returned
361 *
362 * RETURN: Status and Converted value
363 *
364 * DESCRIPTION: Convert a string into an unsigned value.
365 * NOTE: Does not support Octal strings, not needed.
366 *
367 ******************************************************************************/
368
369acpi_status
370acpi_ut_strtoul64 (
371 char *string,
372 u32 base,
373 acpi_integer *ret_integer)
374{
375 u32 this_digit = 0;
376 acpi_integer return_value = 0;
377 acpi_integer quotient;
378
379
380 ACPI_FUNCTION_TRACE ("ut_stroul64");
381
382
383 if ((!string) || !(*string)) {
384 goto error_exit;
385 }
386
387 switch (base) {
388 case ACPI_ANY_BASE:
389 case 10:
390 case 16:
391 break;
392
393 default:
394 /* Invalid Base */
395 return_ACPI_STATUS (AE_BAD_PARAMETER);
396 }
397
398 /* Skip over any white space in the buffer */
399
400 while (ACPI_IS_SPACE (*string) || *string == '\t') {
401 string++;
402 }
403
404 /*
405 * If the input parameter Base is zero, then we need to
406 * determine if it is decimal or hexadecimal:
407 */
408 if (base == 0) {
409 if ((*string == '0') &&
410 (ACPI_TOLOWER (*(string + 1)) == 'x')) {
411 base = 16;
412 string += 2;
413 }
414 else {
415 base = 10;
416 }
417 }
418
419 /*
420 * For hexadecimal base, skip over the leading
421 * 0 or 0x, if they are present.
422 */
423 if ((base == 16) &&
424 (*string == '0') &&
425 (ACPI_TOLOWER (*(string + 1)) == 'x')) {
426 string += 2;
427 }
428
429 /* Any string left? */
430
431 if (!(*string)) {
432 goto error_exit;
433 }
434
435 /* Main loop: convert the string to a 64-bit integer */
436
437 while (*string) {
438 if (ACPI_IS_DIGIT (*string)) {
439 /* Convert ASCII 0-9 to Decimal value */
440
441 this_digit = ((u8) *string) - '0';
442 }
443 else {
444 if (base == 10) {
445 /* Digit is out of range */
446
447 goto error_exit;
448 }
449
450 this_digit = (u8) ACPI_TOUPPER (*string);
451 if (ACPI_IS_XDIGIT ((char) this_digit)) {
452 /* Convert ASCII Hex char to value */
453
454 this_digit = this_digit - 'A' + 10;
455 }
456 else {
457 /*
458 * We allow non-hex chars, just stop now, same as end-of-string.
459 * See ACPI spec, string-to-integer conversion.
460 */
461 break;
462 }
463 }
464
465 /* Divide the digit into the correct position */
466
467 (void) acpi_ut_short_divide ((ACPI_INTEGER_MAX - (acpi_integer) this_digit),
468 base, &quotient, NULL);
469 if (return_value > quotient) {
470 goto error_exit;
471 }
472
473 return_value *= base;
474 return_value += this_digit;
475 string++;
476 }
477
478 /* All done, normal exit */
479
480 *ret_integer = return_value;
481 return_ACPI_STATUS (AE_OK);
482
483
484error_exit:
485 /* Base was set/validated above */
486
487 if (base == 10) {
488 return_ACPI_STATUS (AE_BAD_DECIMAL_CONSTANT);
489 }
490 else {
491 return_ACPI_STATUS (AE_BAD_HEX_CONSTANT);
492 }
493}
494
495
496/*******************************************************************************
497 *
498 * FUNCTION: acpi_ut_strupr
499 *
500 * PARAMETERS: src_string - The source string to convert to
501 *
502 * RETURN: src_string
503 *
504 * DESCRIPTION: Convert string to uppercase
505 *
506 ******************************************************************************/
507#ifdef ACPI_FUTURE_USAGE
508char *
509acpi_ut_strupr (
510 char *src_string)
511{
512 char *string;
513
514
515 ACPI_FUNCTION_ENTRY ();
516
517
518 /* Walk entire string, uppercasing the letters */
519
520 for (string = src_string; *string; ) {
521 *string = (char) ACPI_TOUPPER (*string);
522 string++;
523 }
524
525 return (src_string);
526}
527#endif /* ACPI_FUTURE_USAGE */
528
529
530/*******************************************************************************
531 *
532 * FUNCTION: acpi_ut_mutex_initialize
533 *
534 * PARAMETERS: None.
535 *
536 * RETURN: Status
537 *
538 * DESCRIPTION: Create the system mutex objects.
539 *
540 ******************************************************************************/
541
542acpi_status
543acpi_ut_mutex_initialize (
544 void)
545{
546 u32 i;
547 acpi_status status;
548
549
550 ACPI_FUNCTION_TRACE ("ut_mutex_initialize");
551
552
553 /*
554 * Create each of the predefined mutex objects
555 */
556 for (i = 0; i < NUM_MUTEX; i++) {
557 status = acpi_ut_create_mutex (i);
558 if (ACPI_FAILURE (status)) {
559 return_ACPI_STATUS (status);
560 }
561 }
562
563 status = acpi_os_create_lock (&acpi_gbl_gpe_lock);
564 return_ACPI_STATUS (status);
565}
566
567
568/*******************************************************************************
569 *
570 * FUNCTION: acpi_ut_mutex_terminate
571 *
572 * PARAMETERS: None.
573 *
574 * RETURN: None.
575 *
576 * DESCRIPTION: Delete all of the system mutex objects.
577 *
578 ******************************************************************************/
579
580void
581acpi_ut_mutex_terminate (
582 void)
583{
584 u32 i;
585
586
587 ACPI_FUNCTION_TRACE ("ut_mutex_terminate");
588
589
590 /*
591 * Delete each predefined mutex object
592 */
593 for (i = 0; i < NUM_MUTEX; i++) {
594 (void) acpi_ut_delete_mutex (i);
595 }
596
597 acpi_os_delete_lock (acpi_gbl_gpe_lock);
598 return_VOID;
599}
600
601
602/*******************************************************************************
603 *
604 * FUNCTION: acpi_ut_create_mutex
605 *
606 * PARAMETERS: mutex_iD - ID of the mutex to be created
607 *
608 * RETURN: Status
609 *
610 * DESCRIPTION: Create a mutex object.
611 *
612 ******************************************************************************/
613
614acpi_status
615acpi_ut_create_mutex (
616 acpi_mutex_handle mutex_id)
617{
618 acpi_status status = AE_OK;
619
620
621 ACPI_FUNCTION_TRACE_U32 ("ut_create_mutex", mutex_id);
622
623
624 if (mutex_id > MAX_MUTEX) {
625 return_ACPI_STATUS (AE_BAD_PARAMETER);
626 }
627
628 if (!acpi_gbl_mutex_info[mutex_id].mutex) {
629 status = acpi_os_create_semaphore (1, 1,
630 &acpi_gbl_mutex_info[mutex_id].mutex);
631 acpi_gbl_mutex_info[mutex_id].owner_id = ACPI_MUTEX_NOT_ACQUIRED;
632 acpi_gbl_mutex_info[mutex_id].use_count = 0;
633 }
634
635 return_ACPI_STATUS (status);
636}
637
638
639/*******************************************************************************
640 *
641 * FUNCTION: acpi_ut_delete_mutex
642 *
643 * PARAMETERS: mutex_iD - ID of the mutex to be deleted
644 *
645 * RETURN: Status
646 *
647 * DESCRIPTION: Delete a mutex object.
648 *
649 ******************************************************************************/
650
651acpi_status
652acpi_ut_delete_mutex (
653 acpi_mutex_handle mutex_id)
654{
655 acpi_status status;
656
657
658 ACPI_FUNCTION_TRACE_U32 ("ut_delete_mutex", mutex_id);
659
660
661 if (mutex_id > MAX_MUTEX) {
662 return_ACPI_STATUS (AE_BAD_PARAMETER);
663 }
664
665 status = acpi_os_delete_semaphore (acpi_gbl_mutex_info[mutex_id].mutex);
666
667 acpi_gbl_mutex_info[mutex_id].mutex = NULL;
668 acpi_gbl_mutex_info[mutex_id].owner_id = ACPI_MUTEX_NOT_ACQUIRED;
669
670 return_ACPI_STATUS (status);
671}
672
673
674/*******************************************************************************
675 *
676 * FUNCTION: acpi_ut_acquire_mutex
677 *
678 * PARAMETERS: mutex_iD - ID of the mutex to be acquired
679 *
680 * RETURN: Status
681 *
682 * DESCRIPTION: Acquire a mutex object.
683 *
684 ******************************************************************************/
685
686acpi_status
687acpi_ut_acquire_mutex (
688 acpi_mutex_handle mutex_id)
689{
690 acpi_status status;
691 u32 this_thread_id;
692
693
694 ACPI_FUNCTION_NAME ("ut_acquire_mutex");
695
696
697 if (mutex_id > MAX_MUTEX) {
698 return (AE_BAD_PARAMETER);
699 }
700
701 this_thread_id = acpi_os_get_thread_id ();
702
703#ifdef ACPI_MUTEX_DEBUG
704 {
705 u32 i;
706 /*
707 * Mutex debug code, for internal debugging only.
708 *
709 * Deadlock prevention. Check if this thread owns any mutexes of value
710 * greater than or equal to this one. If so, the thread has violated
711 * the mutex ordering rule. This indicates a coding error somewhere in
712 * the ACPI subsystem code.
713 */
714 for (i = mutex_id; i < MAX_MUTEX; i++) {
715 if (acpi_gbl_mutex_info[i].owner_id == this_thread_id) {
716 if (i == mutex_id) {
717 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
718 "Mutex [%s] already acquired by this thread [%X]\n",
719 acpi_ut_get_mutex_name (mutex_id), this_thread_id));
720
721 return (AE_ALREADY_ACQUIRED);
722 }
723
724 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
725 "Invalid acquire order: Thread %X owns [%s], wants [%s]\n",
726 this_thread_id, acpi_ut_get_mutex_name (i),
727 acpi_ut_get_mutex_name (mutex_id)));
728
729 return (AE_ACQUIRE_DEADLOCK);
730 }
731 }
732 }
733#endif
734
735 ACPI_DEBUG_PRINT ((ACPI_DB_MUTEX,
736 "Thread %X attempting to acquire Mutex [%s]\n",
737 this_thread_id, acpi_ut_get_mutex_name (mutex_id)));
738
739 status = acpi_os_wait_semaphore (acpi_gbl_mutex_info[mutex_id].mutex,
740 1, ACPI_WAIT_FOREVER);
741 if (ACPI_SUCCESS (status)) {
742 ACPI_DEBUG_PRINT ((ACPI_DB_MUTEX, "Thread %X acquired Mutex [%s]\n",
743 this_thread_id, acpi_ut_get_mutex_name (mutex_id)));
744
745 acpi_gbl_mutex_info[mutex_id].use_count++;
746 acpi_gbl_mutex_info[mutex_id].owner_id = this_thread_id;
747 }
748 else {
749 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Thread %X could not acquire Mutex [%s] %s\n",
750 this_thread_id, acpi_ut_get_mutex_name (mutex_id),
751 acpi_format_exception (status)));
752 }
753
754 return (status);
755}
756
757
758/*******************************************************************************
759 *
760 * FUNCTION: acpi_ut_release_mutex
761 *
762 * PARAMETERS: mutex_iD - ID of the mutex to be released
763 *
764 * RETURN: Status
765 *
766 * DESCRIPTION: Release a mutex object.
767 *
768 ******************************************************************************/
769
770acpi_status
771acpi_ut_release_mutex (
772 acpi_mutex_handle mutex_id)
773{
774 acpi_status status;
775 u32 i;
776 u32 this_thread_id;
777
778
779 ACPI_FUNCTION_NAME ("ut_release_mutex");
780
781
782 this_thread_id = acpi_os_get_thread_id ();
783 ACPI_DEBUG_PRINT ((ACPI_DB_MUTEX,
784 "Thread %X releasing Mutex [%s]\n", this_thread_id,
785 acpi_ut_get_mutex_name (mutex_id)));
786
787 if (mutex_id > MAX_MUTEX) {
788 return (AE_BAD_PARAMETER);
789 }
790
791 /*
792 * Mutex must be acquired in order to release it!
793 */
794 if (acpi_gbl_mutex_info[mutex_id].owner_id == ACPI_MUTEX_NOT_ACQUIRED) {
795 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
796 "Mutex [%s] is not acquired, cannot release\n",
797 acpi_ut_get_mutex_name (mutex_id)));
798
799 return (AE_NOT_ACQUIRED);
800 }
801
802 /*
803 * Deadlock prevention. Check if this thread owns any mutexes of value
804 * greater than this one. If so, the thread has violated the mutex
805 * ordering rule. This indicates a coding error somewhere in
806 * the ACPI subsystem code.
807 */
808 for (i = mutex_id; i < MAX_MUTEX; i++) {
809 if (acpi_gbl_mutex_info[i].owner_id == this_thread_id) {
810 if (i == mutex_id) {
811 continue;
812 }
813
814 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
815 "Invalid release order: owns [%s], releasing [%s]\n",
816 acpi_ut_get_mutex_name (i), acpi_ut_get_mutex_name (mutex_id)));
817
818 return (AE_RELEASE_DEADLOCK);
819 }
820 }
821
822 /* Mark unlocked FIRST */
823
824 acpi_gbl_mutex_info[mutex_id].owner_id = ACPI_MUTEX_NOT_ACQUIRED;
825
826 status = acpi_os_signal_semaphore (acpi_gbl_mutex_info[mutex_id].mutex, 1);
827
828 if (ACPI_FAILURE (status)) {
829 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Thread %X could not release Mutex [%s] %s\n",
830 this_thread_id, acpi_ut_get_mutex_name (mutex_id),
831 acpi_format_exception (status)));
832 }
833 else {
834 ACPI_DEBUG_PRINT ((ACPI_DB_MUTEX, "Thread %X released Mutex [%s]\n",
835 this_thread_id, acpi_ut_get_mutex_name (mutex_id)));
836 }
837
838 return (status);
839}
840
841
842/*******************************************************************************
843 *
844 * FUNCTION: acpi_ut_create_update_state_and_push
845 *
846 * PARAMETERS: *Object - Object to be added to the new state
847 * Action - Increment/Decrement
848 * state_list - List the state will be added to
849 *
850 * RETURN: None
851 *
852 * DESCRIPTION: Create a new state and push it
853 *
854 ******************************************************************************/
855
856acpi_status
857acpi_ut_create_update_state_and_push (
858 union acpi_operand_object *object,
859 u16 action,
860 union acpi_generic_state **state_list)
861{
862 union acpi_generic_state *state;
863
864
865 ACPI_FUNCTION_ENTRY ();
866
867
868 /* Ignore null objects; these are expected */
869
870 if (!object) {
871 return (AE_OK);
872 }
873
874 state = acpi_ut_create_update_state (object, action);
875 if (!state) {
876 return (AE_NO_MEMORY);
877 }
878
879 acpi_ut_push_generic_state (state_list, state);
880 return (AE_OK);
881}
882
883
884/*******************************************************************************
885 *
886 * FUNCTION: acpi_ut_create_pkg_state_and_push
887 *
888 * PARAMETERS: *Object - Object to be added to the new state
889 * Action - Increment/Decrement
890 * state_list - List the state will be added to
891 *
892 * RETURN: None
893 *
894 * DESCRIPTION: Create a new state and push it
895 *
896 ******************************************************************************/
897#ifdef ACPI_FUTURE_USAGE
898acpi_status
899acpi_ut_create_pkg_state_and_push (
900 void *internal_object,
901 void *external_object,
902 u16 index,
903 union acpi_generic_state **state_list)
904{
905 union acpi_generic_state *state;
906
907
908 ACPI_FUNCTION_ENTRY ();
909
910
911 state = acpi_ut_create_pkg_state (internal_object, external_object, index);
912 if (!state) {
913 return (AE_NO_MEMORY);
914 }
915
916 acpi_ut_push_generic_state (state_list, state);
917 return (AE_OK);
918}
919#endif /* ACPI_FUTURE_USAGE */
920
921/*******************************************************************************
922 *
923 * FUNCTION: acpi_ut_push_generic_state
924 *
925 * PARAMETERS: list_head - Head of the state stack
926 * State - State object to push
927 *
928 * RETURN: Status
929 *
930 * DESCRIPTION: Push a state object onto a state stack
931 *
932 ******************************************************************************/
933
934void
935acpi_ut_push_generic_state (
936 union acpi_generic_state **list_head,
937 union acpi_generic_state *state)
938{
939 ACPI_FUNCTION_TRACE ("ut_push_generic_state");
940
941
942 /* Push the state object onto the front of the list (stack) */
943
944 state->common.next = *list_head;
945 *list_head = state;
946
947 return_VOID;
948}
949
950
951/*******************************************************************************
952 *
953 * FUNCTION: acpi_ut_pop_generic_state
954 *
955 * PARAMETERS: list_head - Head of the state stack
956 *
957 * RETURN: Status
958 *
959 * DESCRIPTION: Pop a state object from a state stack
960 *
961 ******************************************************************************/
962
963union acpi_generic_state *
964acpi_ut_pop_generic_state (
965 union acpi_generic_state **list_head)
966{
967 union acpi_generic_state *state;
968
969
970 ACPI_FUNCTION_TRACE ("ut_pop_generic_state");
971
972
973 /* Remove the state object at the head of the list (stack) */
974
975 state = *list_head;
976 if (state) {
977 /* Update the list head */
978
979 *list_head = state->common.next;
980 }
981
982 return_PTR (state);
983}
984
985
986/*******************************************************************************
987 *
988 * FUNCTION: acpi_ut_create_generic_state
989 *
990 * PARAMETERS: None
991 *
992 * RETURN: Status
993 *
994 * DESCRIPTION: Create a generic state object. Attempt to obtain one from
995 * the global state cache; If none available, create a new one.
996 *
997 ******************************************************************************/
998
999union acpi_generic_state *
1000acpi_ut_create_generic_state (void)
1001{
1002 union acpi_generic_state *state;
1003
1004
1005 ACPI_FUNCTION_ENTRY ();
1006
1007
1008 state = acpi_ut_acquire_from_cache (ACPI_MEM_LIST_STATE);
1009
1010 /* Initialize */
1011
1012 if (state) {
1013 state->common.data_type = ACPI_DESC_TYPE_STATE;
1014 }
1015
1016 return (state);
1017}
1018
1019
1020/*******************************************************************************
1021 *
1022 * FUNCTION: acpi_ut_create_thread_state
1023 *
1024 * PARAMETERS: None
1025 *
1026 * RETURN: Thread State
1027 *
1028 * DESCRIPTION: Create a "Thread State" - a flavor of the generic state used
1029 * to track per-thread info during method execution
1030 *
1031 ******************************************************************************/
1032
1033struct acpi_thread_state *
1034acpi_ut_create_thread_state (
1035 void)
1036{
1037 union acpi_generic_state *state;
1038
1039
1040 ACPI_FUNCTION_TRACE ("ut_create_thread_state");
1041
1042
1043 /* Create the generic state object */
1044
1045 state = acpi_ut_create_generic_state ();
1046 if (!state) {
1047 return_PTR (NULL);
1048 }
1049
1050 /* Init fields specific to the update struct */
1051
1052 state->common.data_type = ACPI_DESC_TYPE_STATE_THREAD;
1053 state->thread.thread_id = acpi_os_get_thread_id ();
1054
1055 return_PTR ((struct acpi_thread_state *) state);
1056}
1057
1058
1059/*******************************************************************************
1060 *
1061 * FUNCTION: acpi_ut_create_update_state
1062 *
1063 * PARAMETERS: Object - Initial Object to be installed in the
1064 * state
1065 * Action - Update action to be performed
1066 *
1067 * RETURN: Status
1068 *
1069 * DESCRIPTION: Create an "Update State" - a flavor of the generic state used
1070 * to update reference counts and delete complex objects such
1071 * as packages.
1072 *
1073 ******************************************************************************/
1074
1075union acpi_generic_state *
1076acpi_ut_create_update_state (
1077 union acpi_operand_object *object,
1078 u16 action)
1079{
1080 union acpi_generic_state *state;
1081
1082
1083 ACPI_FUNCTION_TRACE_PTR ("ut_create_update_state", object);
1084
1085
1086 /* Create the generic state object */
1087
1088 state = acpi_ut_create_generic_state ();
1089 if (!state) {
1090 return_PTR (NULL);
1091 }
1092
1093 /* Init fields specific to the update struct */
1094
1095 state->common.data_type = ACPI_DESC_TYPE_STATE_UPDATE;
1096 state->update.object = object;
1097 state->update.value = action;
1098
1099 return_PTR (state);
1100}
1101
1102
1103/*******************************************************************************
1104 *
1105 * FUNCTION: acpi_ut_create_pkg_state
1106 *
1107 * PARAMETERS: Object - Initial Object to be installed in the
1108 * state
1109 * Action - Update action to be performed
1110 *
1111 * RETURN: Status
1112 *
1113 * DESCRIPTION: Create a "Package State"
1114 *
1115 ******************************************************************************/
1116
1117union acpi_generic_state *
1118acpi_ut_create_pkg_state (
1119 void *internal_object,
1120 void *external_object,
1121 u16 index)
1122{
1123 union acpi_generic_state *state;
1124
1125
1126 ACPI_FUNCTION_TRACE_PTR ("ut_create_pkg_state", internal_object);
1127
1128
1129 /* Create the generic state object */
1130
1131 state = acpi_ut_create_generic_state ();
1132 if (!state) {
1133 return_PTR (NULL);
1134 }
1135
1136 /* Init fields specific to the update struct */
1137
1138 state->common.data_type = ACPI_DESC_TYPE_STATE_PACKAGE;
1139 state->pkg.source_object = (union acpi_operand_object *) internal_object;
1140 state->pkg.dest_object = external_object;
1141 state->pkg.index = index;
1142 state->pkg.num_packages = 1;
1143
1144 return_PTR (state);
1145}
1146
1147
1148/*******************************************************************************
1149 *
1150 * FUNCTION: acpi_ut_create_control_state
1151 *
1152 * PARAMETERS: None
1153 *
1154 * RETURN: Status
1155 *
1156 * DESCRIPTION: Create a "Control State" - a flavor of the generic state used
1157 * to support nested IF/WHILE constructs in the AML.
1158 *
1159 ******************************************************************************/
1160
1161union acpi_generic_state *
1162acpi_ut_create_control_state (
1163 void)
1164{
1165 union acpi_generic_state *state;
1166
1167
1168 ACPI_FUNCTION_TRACE ("ut_create_control_state");
1169
1170
1171 /* Create the generic state object */
1172
1173 state = acpi_ut_create_generic_state ();
1174 if (!state) {
1175 return_PTR (NULL);
1176 }
1177
1178 /* Init fields specific to the control struct */
1179
1180 state->common.data_type = ACPI_DESC_TYPE_STATE_CONTROL;
1181 state->common.state = ACPI_CONTROL_CONDITIONAL_EXECUTING;
1182
1183 return_PTR (state);
1184}
1185
1186
1187/*******************************************************************************
1188 *
1189 * FUNCTION: acpi_ut_delete_generic_state
1190 *
1191 * PARAMETERS: State - The state object to be deleted
1192 *
1193 * RETURN: Status
1194 *
1195 * DESCRIPTION: Put a state object back into the global state cache. The object
1196 * is not actually freed at this time.
1197 *
1198 ******************************************************************************/
1199
1200void
1201acpi_ut_delete_generic_state (
1202 union acpi_generic_state *state)
1203{
1204 ACPI_FUNCTION_TRACE ("ut_delete_generic_state");
1205
1206
1207 acpi_ut_release_to_cache (ACPI_MEM_LIST_STATE, state);
1208 return_VOID;
1209}
1210
1211
1212#ifdef ACPI_ENABLE_OBJECT_CACHE
1213/*******************************************************************************
1214 *
1215 * FUNCTION: acpi_ut_delete_generic_state_cache
1216 *
1217 * PARAMETERS: None
1218 *
1219 * RETURN: Status
1220 *
1221 * DESCRIPTION: Purge the global state object cache. Used during subsystem
1222 * termination.
1223 *
1224 ******************************************************************************/
1225
1226void
1227acpi_ut_delete_generic_state_cache (
1228 void)
1229{
1230 ACPI_FUNCTION_TRACE ("ut_delete_generic_state_cache");
1231
1232
1233 acpi_ut_delete_generic_cache (ACPI_MEM_LIST_STATE);
1234 return_VOID;
1235}
1236#endif
1237
1238
1239/*******************************************************************************
1240 *
1241 * FUNCTION: acpi_ut_walk_package_tree
1242 *
1243 * PARAMETERS: obj_desc - The Package object on which to resolve refs
1244 *
1245 * RETURN: Status
1246 *
1247 * DESCRIPTION: Walk through a package
1248 *
1249 ******************************************************************************/
1250
1251acpi_status
1252acpi_ut_walk_package_tree (
1253 union acpi_operand_object *source_object,
1254 void *target_object,
1255 acpi_pkg_callback walk_callback,
1256 void *context)
1257{
1258 acpi_status status = AE_OK;
1259 union acpi_generic_state *state_list = NULL;
1260 union acpi_generic_state *state;
1261 u32 this_index;
1262 union acpi_operand_object *this_source_obj;
1263
1264
1265 ACPI_FUNCTION_TRACE ("ut_walk_package_tree");
1266
1267
1268 state = acpi_ut_create_pkg_state (source_object, target_object, 0);
1269 if (!state) {
1270 return_ACPI_STATUS (AE_NO_MEMORY);
1271 }
1272
1273 while (state) {
1274 /* Get one element of the package */
1275
1276 this_index = state->pkg.index;
1277 this_source_obj = (union acpi_operand_object *)
1278 state->pkg.source_object->package.elements[this_index];
1279
1280 /*
1281 * Check for:
1282 * 1) An uninitialized package element. It is completely
1283 * legal to declare a package and leave it uninitialized
1284 * 2) Not an internal object - can be a namespace node instead
1285 * 3) Any type other than a package. Packages are handled in else
1286 * case below.
1287 */
1288 if ((!this_source_obj) ||
1289 (ACPI_GET_DESCRIPTOR_TYPE (this_source_obj) != ACPI_DESC_TYPE_OPERAND) ||
1290 (ACPI_GET_OBJECT_TYPE (this_source_obj) != ACPI_TYPE_PACKAGE)) {
1291 status = walk_callback (ACPI_COPY_TYPE_SIMPLE, this_source_obj,
1292 state, context);
1293 if (ACPI_FAILURE (status)) {
1294 return_ACPI_STATUS (status);
1295 }
1296
1297 state->pkg.index++;
1298 while (state->pkg.index >= state->pkg.source_object->package.count) {
1299 /*
1300 * We've handled all of the objects at this level, This means
1301 * that we have just completed a package. That package may
1302 * have contained one or more packages itself.
1303 *
1304 * Delete this state and pop the previous state (package).
1305 */
1306 acpi_ut_delete_generic_state (state);
1307 state = acpi_ut_pop_generic_state (&state_list);
1308
1309 /* Finished when there are no more states */
1310
1311 if (!state) {
1312 /*
1313 * We have handled all of the objects in the top level
1314 * package just add the length of the package objects
1315 * and exit
1316 */
1317 return_ACPI_STATUS (AE_OK);
1318 }
1319
1320 /*
1321 * Go back up a level and move the index past the just
1322 * completed package object.
1323 */
1324 state->pkg.index++;
1325 }
1326 }
1327 else {
1328 /* This is a subobject of type package */
1329
1330 status = walk_callback (ACPI_COPY_TYPE_PACKAGE, this_source_obj,
1331 state, context);
1332 if (ACPI_FAILURE (status)) {
1333 return_ACPI_STATUS (status);
1334 }
1335
1336 /*
1337 * Push the current state and create a new one
1338 * The callback above returned a new target package object.
1339 */
1340 acpi_ut_push_generic_state (&state_list, state);
1341 state = acpi_ut_create_pkg_state (this_source_obj,
1342 state->pkg.this_target_obj, 0);
1343 if (!state) {
1344 return_ACPI_STATUS (AE_NO_MEMORY);
1345 }
1346 }
1347 }
1348
1349 /* We should never get here */
1350
1351 return_ACPI_STATUS (AE_AML_INTERNAL);
1352}
1353
1354
1355/*******************************************************************************
1356 *
1357 * FUNCTION: acpi_ut_generate_checksum
1358 *
1359 * PARAMETERS: Buffer - Buffer to be scanned
1360 * Length - number of bytes to examine
1361 *
1362 * RETURN: checksum
1363 *
1364 * DESCRIPTION: Generate a checksum on a raw buffer
1365 *
1366 ******************************************************************************/
1367
1368u8
1369acpi_ut_generate_checksum (
1370 u8 *buffer,
1371 u32 length)
1372{
1373 u32 i;
1374 signed char sum = 0;
1375
1376
1377 for (i = 0; i < length; i++) {
1378 sum = (signed char) (sum + buffer[i]);
1379 }
1380
1381 return ((u8) (0 - sum));
1382}
1383
1384
1385/*******************************************************************************
1386 *
1387 * FUNCTION: acpi_ut_get_resource_end_tag
1388 *
1389 * PARAMETERS: obj_desc - The resource template buffer object
1390 *
1391 * RETURN: Pointer to the end tag
1392 *
1393 * DESCRIPTION: Find the END_TAG resource descriptor in a resource template
1394 *
1395 ******************************************************************************/
1396
1397
1398u8 *
1399acpi_ut_get_resource_end_tag (
1400 union acpi_operand_object *obj_desc)
1401{
1402 u8 buffer_byte;
1403 u8 *buffer;
1404 u8 *end_buffer;
1405
1406
1407 buffer = obj_desc->buffer.pointer;
1408 end_buffer = buffer + obj_desc->buffer.length;
1409
1410 while (buffer < end_buffer) {
1411 buffer_byte = *buffer;
1412 if (buffer_byte & ACPI_RDESC_TYPE_MASK) {
1413 /* Large Descriptor - Length is next 2 bytes */
1414
1415 buffer += ((*(buffer+1) | (*(buffer+2) << 8)) + 3);
1416 }
1417 else {
1418 /* Small Descriptor. End Tag will be found here */
1419
1420 if ((buffer_byte & ACPI_RDESC_SMALL_MASK) == ACPI_RDESC_TYPE_END_TAG) {
1421 /* Found the end tag descriptor, all done. */
1422
1423 return (buffer);
1424 }
1425
1426 /* Length is in the header */
1427
1428 buffer += ((buffer_byte & 0x07) + 1);
1429 }
1430 }
1431
1432 /* End tag not found */
1433
1434 return (NULL);
1435}
1436
1437
1438/*******************************************************************************
1439 *
1440 * FUNCTION: acpi_ut_report_error
1441 *
1442 * PARAMETERS: module_name - Caller's module name (for error output)
1443 * line_number - Caller's line number (for error output)
1444 * component_id - Caller's component ID (for error output)
1445 * Message - Error message to use on failure
1446 *
1447 * RETURN: None
1448 *
1449 * DESCRIPTION: Print error message
1450 *
1451 ******************************************************************************/
1452
1453void
1454acpi_ut_report_error (
1455 char *module_name,
1456 u32 line_number,
1457 u32 component_id)
1458{
1459
1460
1461 acpi_os_printf ("%8s-%04d: *** Error: ", module_name, line_number);
1462}
1463
1464
1465/*******************************************************************************
1466 *
1467 * FUNCTION: acpi_ut_report_warning
1468 *
1469 * PARAMETERS: module_name - Caller's module name (for error output)
1470 * line_number - Caller's line number (for error output)
1471 * component_id - Caller's component ID (for error output)
1472 * Message - Error message to use on failure
1473 *
1474 * RETURN: None
1475 *
1476 * DESCRIPTION: Print warning message
1477 *
1478 ******************************************************************************/
1479
1480void
1481acpi_ut_report_warning (
1482 char *module_name,
1483 u32 line_number,
1484 u32 component_id)
1485{
1486
1487 acpi_os_printf ("%8s-%04d: *** Warning: ", module_name, line_number);
1488}
1489
1490
1491/*******************************************************************************
1492 *
1493 * FUNCTION: acpi_ut_report_info
1494 *
1495 * PARAMETERS: module_name - Caller's module name (for error output)
1496 * line_number - Caller's line number (for error output)
1497 * component_id - Caller's component ID (for error output)
1498 * Message - Error message to use on failure
1499 *
1500 * RETURN: None
1501 *
1502 * DESCRIPTION: Print information message
1503 *
1504 ******************************************************************************/
1505
1506void
1507acpi_ut_report_info (
1508 char *module_name,
1509 u32 line_number,
1510 u32 component_id)
1511{
1512
1513 acpi_os_printf ("%8s-%04d: *** Info: ", module_name, line_number);
1514}
1515
1516
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-14 02:58:34 -0500