64 files changed, 1028 insertions, 225 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3d1a3fb7d5fc..f123c7c9fc98 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -188,23 +188,27 @@ config ARCH_IMX
 
 config ARCH_IOP3XX
         bool "IOP3xx-based"
+        depends on MMU
         select PCI
         help
           Support for Intel's IOP3XX (XScale) family of processors.
 
 config ARCH_IXP4XX
         bool "IXP4xx-based"
+        depends on MMU
         help
           Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_IXP2000
         bool "IXP2400/2800-based"
+        depends on MMU
         select PCI
         help
           Support for Intel's IXP2400/2800 (XScale) family of processors.
 
 config ARCH_IXP23XX
         bool "IXP23XX-based"
+        depends on MMU
         select PCI
         help
           Support for Intel's IXP23xx (XScale) family of processors.
@@ -229,6 +233,7 @@ config ARCH_PNX4008
 
 config ARCH_PXA
         bool "PXA2xx-based"
+        depends on MMU
         select ARCH_MTD_XIP
         help
           Support for Intel's PXA2XX processor line.
@@ -339,6 +344,10 @@ config XSCALE_PMU
         depends on CPU_XSCALE && !XSCALE_PMU_TIMER
         default y
 
+if !MMU
+source "arch/arm/Kconfig-nommu"
+endif
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index a601b8b55f35..7cffbaef064b 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,9 @@ obj-$(CONFIG_PCI)		+= bios32.o
 obj-$(CONFIG_SMP)               += smp.o
 obj-$(CONFIG_OABI_COMPAT)       += sys_oabi-compat.o
 
+obj-$(CONFIG_CRUNCH)            += crunch.o crunch-bits.o
+AFLAGS_crunch-bits.o            := -Wa,-mcpu=ep9312
+
 obj-$(CONFIG_IWMMXT)            += iwmmxt.o
 AFLAGS_iwmmxt.o                 := -Wa,-mcpu=iwmmxt
 
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index c49b5d4d7fca..da69e660574b 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -109,11 +109,13 @@ EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(__memzero);
 
         /* user mem (segment) */
-EXPORT_SYMBOL(__arch_copy_from_user);
-EXPORT_SYMBOL(__arch_copy_to_user);
-EXPORT_SYMBOL(__arch_clear_user);
-EXPORT_SYMBOL(__arch_strnlen_user);
-EXPORT_SYMBOL(__arch_strncpy_from_user);
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+
+#ifdef CONFIG_MMU
+EXPORT_SYMBOL(__copy_from_user);
+EXPORT_SYMBOL(__copy_to_user);
+EXPORT_SYMBOL(__clear_user);
 
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
@@ -123,6 +125,7 @@ EXPORT_SYMBOL(__put_user_1);
 EXPORT_SYMBOL(__put_user_2);
 EXPORT_SYMBOL(__put_user_4);
 EXPORT_SYMBOL(__put_user_8);
+#endif
 
         /* crypto hash */
 EXPORT_SYMBOL(sha_transform);
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 396efba9bacd..447ede5143a8 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -60,6 +60,9 @@ int main(void)
 #ifdef CONFIG_IWMMXT
   DEFINE(TI_IWMMXT_STATE,       offsetof(struct thread_info, fpstate.iwmmxt));
 #endif
+#ifdef CONFIG_CRUNCH
+  DEFINE(TI_CRUNCH_STATE,       offsetof(struct thread_info, crunchstate));
+#endif
   BLANK();
   DEFINE(S_R0,                  offsetof(struct pt_regs, ARM_r0));
   DEFINE(S_R1,                  offsetof(struct pt_regs, ARM_r1));
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
new file mode 100644
index 000000000000..a26886758c67
--- /dev/null
+++ b/arch/arm/kernel/crunch-bits.S
@@ -0,0 +1,305 @@
+/*
+ * arch/arm/kernel/crunch-bits.S
+ * Cirrus MaverickCrunch context switching and handling
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * Shamelessly stolen from the iWMMXt code by Nicolas Pitre, which is
+ * Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/arch/ep93xx-regs.h>
+
+/*
+ * We can't use hex constants here due to a bug in gas.
+ */
+#define CRUNCH_MVDX0            0
+#define CRUNCH_MVDX1            8
+#define CRUNCH_MVDX2            16
+#define CRUNCH_MVDX3            24
+#define CRUNCH_MVDX4            32
+#define CRUNCH_MVDX5            40
+#define CRUNCH_MVDX6            48
+#define CRUNCH_MVDX7            56
+#define CRUNCH_MVDX8            64
+#define CRUNCH_MVDX9            72
+#define CRUNCH_MVDX10           80
+#define CRUNCH_MVDX11           88
+#define CRUNCH_MVDX12           96
+#define CRUNCH_MVDX13           104
+#define CRUNCH_MVDX14           112
+#define CRUNCH_MVDX15           120
+#define CRUNCH_MVAX0L           128
+#define CRUNCH_MVAX0M           132
+#define CRUNCH_MVAX0H           136
+#define CRUNCH_MVAX1L           140
+#define CRUNCH_MVAX1M           144
+#define CRUNCH_MVAX1H           148
+#define CRUNCH_MVAX2L           152
+#define CRUNCH_MVAX2M           156
+#define CRUNCH_MVAX2H           160
+#define CRUNCH_MVAX3L           164
+#define CRUNCH_MVAX3M           168
+#define CRUNCH_MVAX3H           172
+#define CRUNCH_DSPSC            176
+
+#define CRUNCH_SIZE             184
+
+        .text
+
+/*
+ * Lazy switching of crunch coprocessor context
+ *
+ * r10 = struct thread_info pointer
+ * r9  = ret_from_exception
+ * lr  = undefined instr exit
+ *
+ * called from prefetch exception handler with interrupts disabled
+ */
+ENTRY(crunch_task_enable)
+        ldr     r8, =(EP93XX_APB_VIRT_BASE + 0x00130000)        @ syscon addr
+
+        ldr     r1, [r8, #0x80]
+        tst     r1, #0x00800000                 @ access to crunch enabled?
+        movne   pc, lr                          @ if so no business here
+        mov     r3, #0xaa                       @ unlock syscon swlock
+        str     r3, [r8, #0xc0]
+        orr     r1, r1, #0x00800000             @ enable access to crunch
+        str     r1, [r8, #0x80]
+
+        ldr     r3, =crunch_owner
+        add     r0, r10, #TI_CRUNCH_STATE       @ get task crunch save area
+        ldr     r2, [sp, #60]                   @ current task pc value
+        ldr     r1, [r3]                        @ get current crunch owner
+        str     r0, [r3]                        @ this task now owns crunch
+        sub     r2, r2, #4                      @ adjust pc back
+        str     r2, [sp, #60]
+
+        ldr     r2, [r8, #0x80]
+        mov     r2, r2                          @ flush out enable (@@@)
+
+        teq     r1, #0                          @ test for last ownership
+        mov     lr, r9                          @ normal exit from exception
+        beq     crunch_load                     @ no owner, skip save
+
+crunch_save:
+        cfstr64         mvdx0, [r1, #CRUNCH_MVDX0]      @ save 64b registers
+        cfstr64         mvdx1, [r1, #CRUNCH_MVDX1]
+        cfstr64         mvdx2, [r1, #CRUNCH_MVDX2]
+        cfstr64         mvdx3, [r1, #CRUNCH_MVDX3]
+        cfstr64         mvdx4, [r1, #CRUNCH_MVDX4]
+        cfstr64         mvdx5, [r1, #CRUNCH_MVDX5]
+        cfstr64         mvdx6, [r1, #CRUNCH_MVDX6]
+        cfstr64         mvdx7, [r1, #CRUNCH_MVDX7]
+        cfstr64         mvdx8, [r1, #CRUNCH_MVDX8]
+        cfstr64         mvdx9, [r1, #CRUNCH_MVDX9]
+        cfstr64         mvdx10, [r1, #CRUNCH_MVDX10]
+        cfstr64         mvdx11, [r1, #CRUNCH_MVDX11]
+        cfstr64         mvdx12, [r1, #CRUNCH_MVDX12]
+        cfstr64         mvdx13, [r1, #CRUNCH_MVDX13]
+        cfstr64         mvdx14, [r1, #CRUNCH_MVDX14]
+        cfstr64         mvdx15, [r1, #CRUNCH_MVDX15]
+
+#ifdef __ARMEB__
+#error fix me for ARMEB
+#endif
+
+        cfmv32al        mvfx0, mvax0                    @ save 72b accumulators
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX0L]
+        cfmv32am        mvfx0, mvax0
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX0M]
+        cfmv32ah        mvfx0, mvax0
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX0H]
+        cfmv32al        mvfx0, mvax1
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX1L]
+        cfmv32am        mvfx0, mvax1
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX1M]
+        cfmv32ah        mvfx0, mvax1
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX1H]
+        cfmv32al        mvfx0, mvax2
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX2L]
+        cfmv32am        mvfx0, mvax2
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX2M]
+        cfmv32ah        mvfx0, mvax2
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX2H]
+        cfmv32al        mvfx0, mvax3
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX3L]
+        cfmv32am        mvfx0, mvax3
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX3M]
+        cfmv32ah        mvfx0, mvax3
+        cfstr32         mvfx0, [r1, #CRUNCH_MVAX3H]
+
+        cfmv32sc        mvdx0, dspsc                    @ save status word
+        cfstr64         mvdx0, [r1, #CRUNCH_DSPSC]
+
+        teq             r0, #0                          @ anything to load?
+        cfldr64eq       mvdx0, [r1, #CRUNCH_MVDX0]      @ mvdx0 was clobbered
+        moveq           pc, lr
+
+crunch_load:
+        cfldr64         mvdx0, [r0, #CRUNCH_DSPSC]      @ load status word
+        cfmvsc32        dspsc, mvdx0
+
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX0L]     @ load 72b accumulators
+        cfmval32        mvax0, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX0M]
+        cfmvam32        mvax0, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX0H]
+        cfmvah32        mvax0, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX1L]
+        cfmval32        mvax1, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX1M]
+        cfmvam32        mvax1, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX1H]
+        cfmvah32        mvax1, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX2L]
+        cfmval32        mvax2, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX2M]
+        cfmvam32        mvax2, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX2H]
+        cfmvah32        mvax2, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX3L]
+        cfmval32        mvax3, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX3M]
+        cfmvam32        mvax3, mvfx0
+        cfldr32         mvfx0, [r0, #CRUNCH_MVAX3H]
+        cfmvah32        mvax3, mvfx0
+
+        cfldr64         mvdx0, [r0, #CRUNCH_MVDX0]      @ load 64b registers
+        cfldr64         mvdx1, [r0, #CRUNCH_MVDX1]
+        cfldr64         mvdx2, [r0, #CRUNCH_MVDX2]
+        cfldr64         mvdx3, [r0, #CRUNCH_MVDX3]
+        cfldr64         mvdx4, [r0, #CRUNCH_MVDX4]
+        cfldr64         mvdx5, [r0, #CRUNCH_MVDX5]
+        cfldr64         mvdx6, [r0, #CRUNCH_MVDX6]
+        cfldr64         mvdx7, [r0, #CRUNCH_MVDX7]
+        cfldr64         mvdx8, [r0, #CRUNCH_MVDX8]
+        cfldr64         mvdx9, [r0, #CRUNCH_MVDX9]
+        cfldr64         mvdx10, [r0, #CRUNCH_MVDX10]
+        cfldr64         mvdx11, [r0, #CRUNCH_MVDX11]
+        cfldr64         mvdx12, [r0, #CRUNCH_MVDX12]
+        cfldr64         mvdx13, [r0, #CRUNCH_MVDX13]
+        cfldr64         mvdx14, [r0, #CRUNCH_MVDX14]
+        cfldr64         mvdx15, [r0, #CRUNCH_MVDX15]
+
+        mov     pc, lr
+
+/*
+ * Back up crunch regs to save area and disable access to them
+ * (mainly for gdb or sleep mode usage)
+ *
+ * r0 = struct thread_info pointer of target task or NULL for any
+ */
+ENTRY(crunch_task_disable)
+        stmfd   sp!, {r4, r5, lr}
+
+        mrs     ip, cpsr
+        orr     r2, ip, #PSR_I_BIT              @ disable interrupts
+        msr     cpsr_c, r2
+
+        ldr     r4, =(EP93XX_APB_VIRT_BASE + 0x00130000)        @ syscon addr
+
+        ldr     r3, =crunch_owner
+        add     r2, r0, #TI_CRUNCH_STATE        @ get task crunch save area
+        ldr     r1, [r3]                        @ get current crunch owner
+        teq     r1, #0                          @ any current owner?
+        beq     1f                              @ no: quit
+        teq     r0, #0                          @ any owner?
+        teqne   r1, r2                          @ or specified one?
+        bne     1f                              @ no: quit
+
+        ldr     r5, [r4, #0x80]                 @ enable access to crunch
+        mov     r2, #0xaa
+        str     r2, [r4, #0xc0]
+        orr     r5, r5, #0x00800000
+        str     r5, [r4, #0x80]
+
+        mov     r0, #0                          @ nothing to load
+        str     r0, [r3]                        @ no more current owner
+        ldr     r2, [r4, #0x80]                 @ flush out enable (@@@)
+        mov     r2, r2
+        bl      crunch_save
+
+        mov     r2, #0xaa                       @ disable access to crunch
+        str     r2, [r4, #0xc0]
+        bic     r5, r5, #0x00800000
+        str     r5, [r4, #0x80]
+        ldr     r5, [r4, #0x80]                 @ flush out enable (@@@)
+        mov     r5, r5
+
+1:      msr     cpsr_c, ip                      @ restore interrupt mode
+        ldmfd   sp!, {r4, r5, pc}
+
+/*
+ * Copy crunch state to given memory address
+ *
+ * r0 = struct thread_info pointer of target task
+ * r1 = memory address where to store crunch state
+ *
+ * this is called mainly in the creation of signal stack frames
+ */
+ENTRY(crunch_task_copy)
+        mrs     ip, cpsr
+        orr     r2, ip, #PSR_I_BIT              @ disable interrupts
+        msr     cpsr_c, r2
+
+        ldr     r3, =crunch_owner
+        add     r2, r0, #TI_CRUNCH_STATE        @ get task crunch save area
+        ldr     r3, [r3]                        @ get current crunch owner
+        teq     r2, r3                          @ does this task own it...
+        beq     1f
+
+        @ current crunch values are in the task save area
+        msr     cpsr_c, ip                      @ restore interrupt mode
+        mov     r0, r1
+        mov     r1, r2
+        mov     r2, #CRUNCH_SIZE
+        b       memcpy
+
+1:      @ this task owns crunch regs -- grab a copy from there
+        mov     r0, #0                          @ nothing to load
+        mov     r3, lr                          @ preserve return address
+        bl      crunch_save
+        msr     cpsr_c, ip                      @ restore interrupt mode
+        mov     pc, r3
+
+/*
+ * Restore crunch state from given memory address
+ *
+ * r0 = struct thread_info pointer of target task
+ * r1 = memory address where to get crunch state from
+ *
+ * this is used to restore crunch state when unwinding a signal stack frame
+ */
+ENTRY(crunch_task_restore)
+        mrs     ip, cpsr
+        orr     r2, ip, #PSR_I_BIT              @ disable interrupts
+        msr     cpsr_c, r2
+
+        ldr     r3, =crunch_owner
+        add     r2, r0, #TI_CRUNCH_STATE        @ get task crunch save area
+        ldr     r3, [r3]                        @ get current crunch owner
+        teq     r2, r3                          @ does this task own it...
+        beq     1f
+
+        @ this task doesn't own crunch regs -- use its save area
+        msr     cpsr_c, ip                      @ restore interrupt mode
+        mov     r0, r2
+        mov     r2, #CRUNCH_SIZE
+        b       memcpy
+
+1:      @ this task owns crunch regs -- load them directly
+        mov     r0, r1
+        mov     r1, #0                          @ nothing to save
+        mov     r3, lr                          @ preserve return address
+        bl      crunch_load
+        msr     cpsr_c, ip                      @ restore interrupt mode
+        mov     pc, r3
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
new file mode 100644
index 000000000000..748175921f9b
--- /dev/null
+++ b/arch/arm/kernel/crunch.c
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/kernel/crunch.c
+ * Cirrus MaverickCrunch context switching and handling
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/arch/ep93xx-regs.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+struct crunch_state *crunch_owner;
+
+void crunch_task_release(struct thread_info *thread)
+{
+        local_irq_disable();
+        if (crunch_owner == &thread->crunchstate)
+                crunch_owner = NULL;
+        local_irq_enable();
+}
+
+static int crunch_enabled(u32 devcfg)
+{
+        return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+}
+
+static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+        struct thread_info *thread = (struct thread_info *)t;
+        struct crunch_state *crunch_state;
+        u32 devcfg;
+
+        crunch_state = &thread->crunchstate;
+
+        switch (cmd) {
+        case THREAD_NOTIFY_FLUSH:
+                memset(crunch_state, 0, sizeof(*crunch_state));
+
+                /*
+                 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+                 * initialised state information on the first fault.
+                 */
+
+        case THREAD_NOTIFY_RELEASE:
+                crunch_task_release(thread);
+                break;
+
+        case THREAD_NOTIFY_SWITCH:
+                devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+                if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
+                        devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+                        __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+                        __raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+                }
+                break;
+        }
+
+        return NOTIFY_DONE;
+}
+
+static struct notifier_block crunch_notifier_block = {
+        .notifier_call  = crunch_do,
+};
+
+static int __init crunch_init(void)
+{
+        thread_register_notifier(&crunch_notifier_block);
+
+        return 0;
+}
+
+late_initcall(crunch_init);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 86c92523a346..6423a38839b8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -492,9 +492,15 @@ call_fpe:
         b       do_fpe                          @ CP#1 (FPE)
         b       do_fpe                          @ CP#2 (FPE)
         mov     pc, lr                          @ CP#3
+#ifdef CONFIG_CRUNCH
+        b       crunch_task_enable              @ CP#4 (MaverickCrunch)
+        b       crunch_task_enable              @ CP#5 (MaverickCrunch)
+        b       crunch_task_enable              @ CP#6 (MaverickCrunch)
+#else
         mov     pc, lr                          @ CP#4
         mov     pc, lr                          @ CP#5
         mov     pc, lr                          @ CP#6
+#endif
         mov     pc, lr                          @ CP#7
         mov     pc, lr                          @ CP#8
         mov     pc, lr                          @ CP#9
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index a1d1b2906e8d..c40bdc770054 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -634,6 +634,32 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
 
 #endif
 
+#ifdef CONFIG_CRUNCH
+/*
+ * Get the child Crunch state.
+ */
+static int ptrace_getcrunchregs(struct task_struct *tsk, void __user *ufp)
+{
+        struct thread_info *thread = task_thread_info(tsk);
+
+        crunch_task_disable(thread);  /* force it to ram */
+        return copy_to_user(ufp, &thread->crunchstate, CRUNCH_SIZE)
+                ? -EFAULT : 0;
+}
+
+/*
+ * Set the child Crunch state.
+ */
+static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
+{
+        struct thread_info *thread = task_thread_info(tsk);
+
+        crunch_task_release(thread);  /* force a reload */
+        return copy_from_user(&thread->crunchstate, ufp, CRUNCH_SIZE)
+                ? -EFAULT : 0;
+}
+#endif
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
         unsigned long tmp;
@@ -765,6 +791,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                         child->ptrace_message = data;
                         break;
 
+#ifdef CONFIG_CRUNCH
+                case PTRACE_GETCRUNCHREGS:
+                        ret = ptrace_getcrunchregs(child, (void __user *)data);
+                        break;
+
+                case PTRACE_SETCRUNCHREGS:
+                        ret = ptrace_setcrunchregs(child, (void __user *)data);
+                        break;
+#endif
+
                 default:
                         ret = ptrace_request(child, request, addr, data);
                         break;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 1ce05ec086c6..83a8d3c95eb3 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -132,6 +132,37 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
         return ret;
 }
 
+#ifdef CONFIG_CRUNCH
+static int preserve_crunch_context(struct crunch_sigframe *frame)
+{
+        char kbuf[sizeof(*frame) + 8];
+        struct crunch_sigframe *kframe;
+
+        /* the crunch context must be 64 bit aligned */
+        kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+        kframe->magic = CRUNCH_MAGIC;
+        kframe->size = CRUNCH_STORAGE_SIZE;
+        crunch_task_copy(current_thread_info(), &kframe->storage);
+        return __copy_to_user(frame, kframe, sizeof(*frame));
+}
+
+static int restore_crunch_context(struct crunch_sigframe *frame)
+{
+        char kbuf[sizeof(*frame) + 8];
+        struct crunch_sigframe *kframe;
+
+        /* the crunch context must be 64 bit aligned */
+        kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+        if (__copy_from_user(kframe, frame, sizeof(*frame)))
+                return -1;
+        if (kframe->magic != CRUNCH_MAGIC ||
+            kframe->size != CRUNCH_STORAGE_SIZE)
+                return -1;
+        crunch_task_restore(current_thread_info(), &kframe->storage);
+        return 0;
+}
+#endif
+
 #ifdef CONFIG_IWMMXT
 
 static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
@@ -214,6 +245,10 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
         err |= !valid_user_regs(regs);
 
         aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
+#ifdef CONFIG_CRUNCH
+        if (err == 0)
+                err |= restore_crunch_context(&aux->crunch);
+#endif
 #ifdef CONFIG_IWMMXT
         if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
                 err |= restore_iwmmxt_context(&aux->iwmmxt);
@@ -333,6 +368,10 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
         err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
 
         aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
+#ifdef CONFIG_CRUNCH
+        if (err == 0)
+                err |= preserve_crunch_context(&aux->crunch);
+#endif
 #ifdef CONFIG_IWMMXT
         if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
                 err |= preserve_iwmmxt_context(&aux->iwmmxt);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 2b254e88595c..2df9688a7028 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -80,6 +80,10 @@ SECTIONS
                 *(.exit.text)
                 *(.exit.data)
                 *(.exitcall.exit)
+#ifndef CONFIG_MMU
+                *(.fixup)
+                *(__ex_table)
+#endif
         }
 
         .text : {                       /* Real text segment            */
@@ -87,7 +91,9 @@ SECTIONS
                         *(.text)
                         SCHED_TEXT
                         LOCK_TEXT
+#ifdef CONFIG_MMU
                         *(.fixup)
+#endif
                         *(.gnu.warning)
                         *(.rodata)
                         *(.rodata.*)
@@ -142,7 +148,9 @@ SECTIONS
                  */
                 . = ALIGN(32);
                 __start___ex_table = .;
+#ifdef CONFIG_MMU
                 *(__ex_table)
+#endif
                 __stop___ex_table = .;
 
                 /*
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 7b726b627ea5..30351cd4560d 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -6,28 +6,31 @@
 
 lib-y           := backtrace.o changebit.o csumipv6.o csumpartial.o   \
                    csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
-                   copy_page.o delay.o findbit.o memchr.o memcpy.o    \
+                   delay.o findbit.o memchr.o memcpy.o                \
                    memmove.o memset.o memzero.o setbit.o              \
                    strncpy_from_user.o strnlen_user.o                 \
                    strchr.o strrchr.o                                 \
                    testchangebit.o testclearbit.o testsetbit.o        \
-                   getuser.o putuser.o clear_user.o                   \
                    ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
                    ucmpdi2.o lib1funcs.o div64.o sha1.o               \
                    io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
+mmu-y   := clear_user.o copy_page.o getuser.o putuser.o
+
 # the code in uaccess.S is not preemption safe and
 # probably faster on ARMv3 only
 ifeq ($(CONFIG_PREEMPT),y)
-  lib-y += copy_from_user.o copy_to_user.o
+  mmu-y += copy_from_user.o copy_to_user.o
 else
 ifneq ($(CONFIG_CPU_32v3),y)
-  lib-y += copy_from_user.o copy_to_user.o
+  mmu-y += copy_from_user.o copy_to_user.o
 else
-  lib-y += uaccess.o
+  mmu-y += uaccess.o
 endif
 endif
 
+lib-$(CONFIG_MMU) += $(mmu-y)
+
 ifeq ($(CONFIG_CPU_32v3),y)
   lib-y += io-readsw-armv3.o io-writesw-armv3.o
 else
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 058b80d72aa1..91f993f2e9db 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -97,16 +97,13 @@ ENTRY(c_backtrace)
                 b       1007f
 
 /*
- * Fixup for LDMDB
+ * Fixup for LDMDB.  Note that this must not be in the fixup section.
  */
-                .section .fixup,"ax"
-                .align  0
 1007:           ldr     r0, =.Lbad
                 mov     r1, frame
                 bl      printk
                 ldmfd   sp!, {r4 - r8, pc}
                 .ltorg
-                .previous
                 
                 .section __ex_table,"a"
                 .align  3
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index ea435ae2e4a5..ecb28dcdaf7b 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -12,13 +12,13 @@
 
                 .text
 
-/* Prototype: int __arch_clear_user(void *addr, size_t sz)
+/* Prototype: int __clear_user(void *addr, size_t sz)
  * Purpose  : clear some user memory
  * Params   : addr - user memory address to clear
  *          : sz   - number of bytes to clear
  * Returns  : number of bytes NOT cleared
  */
-ENTRY(__arch_clear_user)
+ENTRY(__clear_user)
                 stmfd   sp!, {r1, lr}
                 mov     r2, #0
                 cmp     r1, #4
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 7497393a0e81..6b7363ce749c 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -16,7 +16,7 @@
 /*
  * Prototype:
  *
- *      size_t __arch_copy_from_user(void *to, const void *from, size_t n)
+ *      size_t __copy_from_user(void *to, const void *from, size_t n)
  *
  * Purpose:
  *
@@ -83,7 +83,7 @@
 
         .text
 
-ENTRY(__arch_copy_from_user)
+ENTRY(__copy_from_user)
 
 #include "copy_template.S"
 
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 4a6d8ea14022..5224d94688d9 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -16,7 +16,7 @@
 /*
  * Prototype:
  *
- *      size_t __arch_copy_to_user(void *to, const void *from, size_t n)
+ *      size_t __copy_to_user(void *to, const void *from, size_t n)
  *
  * Purpose:
  *
@@ -86,7 +86,7 @@
 
         .text
 
-ENTRY(__arch_copy_to_user)
+ENTRY(__copy_to_user)
 
 #include "copy_template.S"
 
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 35649f04fcac..36e3741a3772 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -20,7 +20,7 @@
  * returns the number of characters copied (strlen of copied string),
  *  -EFAULT on exception, or "len" if we fill the whole buffer
  */
-ENTRY(__arch_strncpy_from_user)
+ENTRY(__strncpy_from_user)
         mov     ip, r1
 1:      subs    r2, r2, #1
 USER(   ldrplbt r3, [r1], #1)
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 3668a15991ef..18d8fa4f925a 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -14,13 +14,13 @@
         .text
         .align  5
 
-/* Prototype: unsigned long __arch_strnlen_user(const char *str, long n)
+/* Prototype: unsigned long __strnlen_user(const char *str, long n)
  * Purpose  : get length of a string in user memory
  * Params   : str - address of string in user memory
  * Returns  : length of string *including terminator*
  *            or zero on exception, or n + 1 if too long
  */
-ENTRY(__arch_strnlen_user)
+ENTRY(__strnlen_user)
         mov     r2, r0
 1:
 USER(   ldrbt   r3, [r0], #1)
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index 1f1545d737be..b48bd6d5fd83 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -19,7 +19,7 @@
 
 #define PAGE_SHIFT 12
 
-/* Prototype: int __arch_copy_to_user(void *to, const char *from, size_t n)
+/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
  * Purpose  : copy a block to user memory from kernel memory
  * Params   : to   - user memory
  *          : from - kernel memory
@@ -39,7 +39,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
                 sub     r2, r2, ip
                 b       .Lc2u_dest_aligned
 
-ENTRY(__arch_copy_to_user)
+ENTRY(__copy_to_user)
                 stmfd   sp!, {r2, r4 - r7, lr}
                 cmp     r2, #4
                 blt     .Lc2u_not_enough
@@ -283,7 +283,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 9001:           ldmfd   sp!, {r0, r4 - r7, pc}
                 .previous
 
-/* Prototype: unsigned long __arch_copy_from_user(void *to,const void *from,unsigned long n);
+/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
  * Purpose  : copy a block from user memory to kernel memory
  * Params   : to   - kernel memory
  *          : from - user memory
@@ -302,7 +302,7 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
                 sub     r2, r2, ip
                 b       .Lcfu_dest_aligned
 
-ENTRY(__arch_copy_from_user)
+ENTRY(__copy_from_user)
                 stmfd   sp!, {r0, r2, r4 - r7, lr}
                 cmp     r2, #4
                 blt     .Lcfu_not_enough
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index cec5a21ca4e3..e15e4c54a253 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -2,8 +2,19 @@ if ARCH_EP93XX
 
 menu "Cirrus EP93xx Implementation Options"
 
+config CRUNCH
+        bool "Support for MaverickCrunch"
+        help
+          Enable kernel support for MaverickCrunch.
+
 comment "EP93xx Platforms"
 
+config MACH_EDB9315
+        bool "Support Cirrus Logic EDB9315"
+        help
+          Say 'Y' here if you want your kernel to support the Cirrus
+          Logic EDB9315 Evaluation Board.
+
 config MACH_GESBC9312
         bool "Support Glomation GESBC-9312-sx"
         help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 05a48a21038e..dfa7e2e8a18b 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,5 +6,6 @@ obj-m			:=
 obj-n                   :=
 obj-                    :=
 
+obj-$(CONFIG_MACH_EDB9315)      += edb9315.o
 obj-$(CONFIG_MACH_GESBC9312)    += gesbc9312.o
 obj-$(CONFIG_MACH_TS72XX)       += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
new file mode 100644
index 000000000000..ef7482faad81
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315.c
+ * Cirrus Logic EDB9315 support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315_flash_data = {
+        .width          = 4,
+};
+
+static struct resource edb9315_flash_resource = {
+        .start          = 0x60000000,
+        .end            = 0x61ffffff,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &edb9315_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &edb9315_flash_resource,
+};
+
+static void __init edb9315_init_machine(void)
+{
+        ep93xx_init_devices();
+        platform_device_register(&edb9315_flash);
+}
+
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = edb9315_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 47cc6c8b7c79..2c28d66d260e 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -30,7 +30,7 @@ static struct physmap_flash_data gesbc9312_flash_data = {
 
 static struct resource gesbc9312_flash_resource = {
         .start          = 0x60000000,
-        .end            = 0x60800000,
+        .end            = 0x607fffff,
         .flags          = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 6e5a56cd5ae8..0b3b875b1875 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -118,7 +118,7 @@ static struct physmap_flash_data ts72xx_flash_data = {
 
 static struct resource ts72xx_flash_resource = {
         .start          = TS72XX_NOR_PHYS_BASE,
-        .end            = TS72XX_NOR_PHYS_BASE + 0x01000000,
+        .end            = TS72XX_NOR_PHYS_BASE + 0x00ffffff,
         .flags          = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index dc5e489c70bc..357351fbb1e2 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -59,7 +59,7 @@ static struct physmap_flash_data espresso_flash_data = {
 
 static struct resource espresso_flash_resource = {
         .start          = 0x90000000,
-        .end            = 0x92000000,
+        .end            = 0x91ffffff,
         .flags          = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 535b334ee045..e0886871cc77 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -304,7 +304,7 @@ static struct physmap_flash_data ixdp2351_flash_data = {
 
 static struct resource ixdp2351_flash_resource = {
         .start          = 0x90000000,
-        .end            = 0x94000000,
+        .end            = 0x93ffffff,
         .flags          = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index b9f5d13fcfe1..92ad18f41251 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -143,7 +143,7 @@ static struct physmap_flash_data roadrunner_flash_data = {
 
 static struct resource roadrunner_flash_resource = {
         .start          = 0x90000000,
-        .end            = 0x94000000,
+        .end            = 0x93ffffff,
         .flags          = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 539b596005fc..d9635ff4b10c 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -88,8 +88,8 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 
         if (type == IRQT_PROBE) {
             /* Don't mess with enabled GPIOs using preconfigured edges or
-               GPIOs set to alternate function during probe */
-                if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
+               GPIOs set to alternate function or to output during probe */
+                if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) &
                     GPIO_bit(gpio))
                         return 0;
                 if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c
index 838bc525e836..9a2258270de9 100644
--- a/arch/arm/mach-s3c2410/s3c244x.c
+++ b/arch/arm/mach-s3c2410/s3c244x.c
@@ -69,6 +69,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
 
         s3c_device_i2c.name  = "s3c2440-i2c";
         s3c_device_nand.name = "s3c2440-nand";
+        s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }
 
 void __init s3c244x_init_clocks(int xtal)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ecf5e232a6fc..c4bca753165b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -15,8 +15,8 @@ config CPU_ARM610
         select CPU_32v3
         select CPU_CACHE_V3
         select CPU_CACHE_VIVT
-        select CPU_COPY_V3
-        select CPU_TLB_V3
+        select CPU_COPY_V3 if MMU
+        select CPU_TLB_V3 if MMU
         help
           The ARM610 is the successor to the ARM3 processor
           and was produced by VLSI Technology Inc.
@@ -31,8 +31,8 @@ config CPU_ARM710
         select CPU_32v3
         select CPU_CACHE_V3
         select CPU_CACHE_VIVT
-        select CPU_COPY_V3
-        select CPU_TLB_V3
+        select CPU_COPY_V3 if MMU
+        select CPU_TLB_V3 if MMU
         help
           A 32-bit RISC microprocessor based on the ARM7 processor core
           designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -50,8 +50,8 @@ config CPU_ARM720T
         select CPU_ABRT_LV4T
         select CPU_CACHE_V4
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WT
-        select CPU_TLB_V4WT
+        select CPU_COPY_V4WT if MMU
+        select CPU_TLB_V4WT if MMU
         help
           A 32-bit RISC processor with 8kByte Cache, Write Buffer and
           MMU built around an ARM7TDMI core.
@@ -68,8 +68,8 @@ config CPU_ARM920T
         select CPU_ABRT_EV4T
         select CPU_CACHE_V4WT
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WBI if MMU
         help
           The ARM920T is licensed to be produced by numerous vendors,
           and is used in the Maverick EP9312 and the Samsung S3C2410.
@@ -89,8 +89,8 @@ config CPU_ARM922T
         select CPU_ABRT_EV4T
         select CPU_CACHE_V4WT
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WBI if MMU
         help
           The ARM922T is a version of the ARM920T, but with smaller
           instruction and data caches. It is used in Altera's
@@ -108,8 +108,8 @@ config CPU_ARM925T
         select CPU_ABRT_EV4T
         select CPU_CACHE_V4WT
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WBI if MMU
         help
           The ARM925T is a mix between the ARM920T and ARM926T, but with
           different instruction and data caches. It is used in TI's OMAP
@@ -126,8 +126,8 @@ config CPU_ARM926T
         select CPU_32v5
         select CPU_ABRT_EV5TJ
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WBI if MMU
         help
           This is a variant of the ARM920.  It has slightly different
           instruction sequences for cache and TLB operations.  Curiously,
@@ -144,8 +144,8 @@ config CPU_ARM1020
         select CPU_ABRT_EV4T
         select CPU_CACHE_V4WT
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WBI if MMU
         help
           The ARM1020 is the 32K cached version of the ARM10 processor,
           with an addition of a floating-point unit.
@@ -161,8 +161,8 @@ config CPU_ARM1020E
         select CPU_ABRT_EV4T
         select CPU_CACHE_V4WT
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WBI if MMU
         depends on n
 
 # ARM1022E
@@ -172,8 +172,8 @@ config CPU_ARM1022
         select CPU_32v5
         select CPU_ABRT_EV4T
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB # can probably do better
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU # can probably do better
+        select CPU_TLB_V4WBI if MMU
         help
           The ARM1022E is an implementation of the ARMv5TE architecture
           based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
@@ -189,8 +189,8 @@ config CPU_ARM1026
         select CPU_32v5
         select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB # can probably do better
-        select CPU_TLB_V4WBI
+        select CPU_COPY_V4WB if MMU # can probably do better
+        select CPU_TLB_V4WBI if MMU
         help
           The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
           based upon the ARM10 integer core.
@@ -207,8 +207,8 @@ config CPU_SA110
         select CPU_ABRT_EV4
         select CPU_CACHE_V4WB
         select CPU_CACHE_VIVT
-        select CPU_COPY_V4WB
-        select CPU_TLB_V4WB
+        select CPU_COPY_V4WB if MMU
+        select CPU_TLB_V4WB if MMU
         help
           The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
           is available at five speeds ranging from 100 MHz to 233 MHz.
@@ -227,7 +227,7 @@ config CPU_SA1100
         select CPU_ABRT_EV4
         select CPU_CACHE_V4WB
         select CPU_CACHE_VIVT
-        select CPU_TLB_V4WB
+        select CPU_TLB_V4WB if MMU
 
 # XScale
 config CPU_XSCALE
@@ -237,7 +237,7 @@ config CPU_XSCALE
         select CPU_32v5
         select CPU_ABRT_EV5T
         select CPU_CACHE_VIVT
-        select CPU_TLB_V4WBI
+        select CPU_TLB_V4WBI if MMU
 
 # XScale Core Version 3
 config CPU_XSC3
@@ -247,7 +247,7 @@ config CPU_XSC3
         select CPU_32v5
         select CPU_ABRT_EV5T
         select CPU_CACHE_VIVT
-        select CPU_TLB_V4WBI
+        select CPU_TLB_V4WBI if MMU
         select IO_36
 
 # ARMv6
@@ -258,8 +258,8 @@ config CPU_V6
         select CPU_ABRT_EV6
         select CPU_CACHE_V6
         select CPU_CACHE_VIPT
-        select CPU_COPY_V6
-        select CPU_TLB_V6
+        select CPU_COPY_V6 if MMU
+        select CPU_TLB_V6 if MMU
 
 # ARMv6k
 config CPU_32v6K
@@ -277,17 +277,17 @@ config CPU_32v6K
 # This defines the compiler instruction set which depends on the machine type.
 config CPU_32v3
         bool
-        select TLS_REG_EMUL if SMP
+        select TLS_REG_EMUL if SMP || !MMU
         select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 
 config CPU_32v4
         bool
-        select TLS_REG_EMUL if SMP
+        select TLS_REG_EMUL if SMP || !MMU
         select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 
 config CPU_32v5
         bool
-        select TLS_REG_EMUL if SMP
+        select TLS_REG_EMUL if SMP || !MMU
         select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 
 config CPU_32v6
@@ -334,6 +334,7 @@ config CPU_CACHE_VIVT
 config CPU_CACHE_VIPT
         bool
 
+if MMU
 # The copy-page model
 config CPU_COPY_V3
         bool
@@ -372,6 +373,8 @@ config CPU_TLB_V4WBI
 config CPU_TLB_V6
         bool
 
+endif
+
 #
 # CPU supports 36-bit I/O
 #
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 07a538505784..21a2770226ee 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -2,10 +2,16 @@
 # Makefile for the linux arm-specific parts of the memory manager.
 #
 
-obj-y                           := consistent.o extable.o fault-armv.o \
-                                   fault.o flush.o init.o ioremap.o mmap.o \
+obj-y                           := consistent.o extable.o fault.o init.o \
+                                   iomap.o
+
+obj-$(CONFIG_MMU)               += fault-armv.o flush.o ioremap.o mmap.o \
                                    mm-armv.o
 
+ifneq ($(CONFIG_MMU),y)
+obj-y                           += nommu.o
+endif
+
 obj-$(CONFIG_MODULES)           += proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)    += alignment.o
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 9ea1f87a7079..989fd681c822 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -26,8 +26,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#define TABLE_SIZE      (2 * PTRS_PER_PTE * sizeof(pte_t))
-
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c
new file mode 100644
index 000000000000..62066f3020c8
--- /dev/null
+++ b/arch/arm/mm/iomap.c
@@ -0,0 +1,55 @@
+/*
+ *  linux/arch/arm/mm/iomap.c
+ *
+ * Map IO port and PCI memory spaces so that {read,write}[bwl] can
+ * be used to access this memory.
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+
+#ifdef __io
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+        return __io(port);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif
+
+#ifdef CONFIG_PCI
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+        unsigned long start = pci_resource_start(dev, bar);
+        unsigned long len   = pci_resource_len(dev, bar);
+        unsigned long flags = pci_resource_flags(dev, bar);
+
+        if (!len || !start)
+                return NULL;
+        if (maxlen && len > maxlen)
+                len = maxlen;
+        if (flags & IORESOURCE_IO)
+                return ioport_map(start, len);
+        if (flags & IORESOURCE_MEM) {
+                if (flags & IORESOURCE_CACHEABLE)
+                        return ioremap(start, len);
+                return ioremap_nocache(start, len);
+        }
+        return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+        if ((unsigned long)addr >= VMALLOC_START &&
+            (unsigned long)addr < VMALLOC_END)
+                iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
+#endif
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index c1f7180c7bed..7691cfdba567 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -176,50 +176,3 @@ void __iounmap(void __iomem *addr)
         vunmap((void *)(PAGE_MASK & (unsigned long)addr));
 }
 EXPORT_SYMBOL(__iounmap);
-
-#ifdef __io
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-        return __io(port);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-}
-EXPORT_SYMBOL(ioport_unmap);
-#endif
-
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#include <linux/ioport.h>
-
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
-{
-        unsigned long start = pci_resource_start(dev, bar);
-        unsigned long len   = pci_resource_len(dev, bar);
-        unsigned long flags = pci_resource_flags(dev, bar);
-
-        if (!len || !start)
-                return NULL;
-        if (maxlen && len > maxlen)
-                len = maxlen;
-        if (flags & IORESOURCE_IO)
-                return ioport_map(start, len);
-        if (flags & IORESOURCE_MEM) {
-                if (flags & IORESOURCE_CACHEABLE)
-                        return ioremap(start, len);
-                return ioremap_nocache(start, len);
-        }
-        return NULL;
-}
-EXPORT_SYMBOL(pci_iomap);
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
-        if ((unsigned long)addr >= VMALLOC_START &&
-            (unsigned long)addr < VMALLOC_END)
-                iounmap(addr);
-}
-EXPORT_SYMBOL(pci_iounmap);
-#endif
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
new file mode 100644
index 000000000000..1464ed817b5d
--- /dev/null
+++ b/arch/arm/mm/nommu.c
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mm/nommu.c
+ *
+ * ARM uCLinux supporting functions.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/page.h>
+
+void flush_dcache_page(struct page *page)
+{
+        __cpuc_flush_dcache_page(page_address(page));
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void __iomem *__ioremap_pfn(unsigned long pfn, unsigned long offset,
+                            size_t size, unsigned long flags)
+{
+        if (pfn >= (0x100000000ULL >> PAGE_SHIFT))
+                return NULL;
+        return (void __iomem *) (offset + (pfn << PAGE_SHIFT));
+}
+EXPORT_SYMBOL(__ioremap_pfn);
+
+void __iomem *__ioremap(unsigned long phys_addr, size_t size,
+                        unsigned long flags)
+{
+        return (void __iomem *)phys_addr;
+}
+EXPORT_SYMBOL(__ioremap);
+
+void __iounmap(void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 959588884fa5..b9abbafca812 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -359,6 +362,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm1020_switch_mm)
+#ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r3, c7, c10, 4
         mov     r1, #0xF                        @ 16 segments
@@ -383,6 +387,7 @@ ENTRY(cpu_arm1020_switch_mm)
         mcr     p15, 0, r1, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, r1, c8, c7, 0           @ invalidate I & D TLBs
+#endif /* CONFIG_MMU */
         mov     pc, lr
         
 /*
@@ -392,6 +397,7 @@ ENTRY(cpu_arm1020_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm1020_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -421,6 +427,7 @@ ENTRY(cpu_arm1020_set_pte)
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -430,7 +437,9 @@ __arm1020_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, arm1020_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index be6d081ff2b7..bcd5ee022e00 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020e_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -344,6 +347,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm1020e_switch_mm)
+#ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r3, c7, c10, 4
         mov     r1, #0xF                        @ 16 segments
@@ -367,6 +371,7 @@ ENTRY(cpu_arm1020e_switch_mm)
         mcr     p15, 0, r1, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, r1, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
         
 /*
@@ -376,6 +381,7 @@ ENTRY(cpu_arm1020e_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm1020e_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -403,6 +409,7 @@ ENTRY(cpu_arm1020e_set_pte)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -412,7 +419,9 @@ __arm1020e_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, arm1020e_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index f778545d57a2..b0ccff4fadd2 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -90,7 +91,9 @@ ENTRY(cpu_arm1022_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -333,6 +336,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm1022_switch_mm)
+#ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mov     r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
 1:      orr     r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -349,6 +353,7 @@ ENTRY(cpu_arm1022_switch_mm)
         mcr     p15, 0, r1, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, r1, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
         
 /*
@@ -358,6 +363,7 @@ ENTRY(cpu_arm1022_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm1022_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -385,6 +391,7 @@ ENTRY(cpu_arm1022_set_pte)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -394,7 +401,9 @@ __arm1022_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, arm1022_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 148c111fde73..abe850c9a641 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -90,7 +91,9 @@ ENTRY(cpu_arm1026_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -327,6 +330,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm1026_switch_mm)
+#ifdef CONFIG_MMU
         mov     r1, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 1:      mrc     p15, 0, r15, c7, c14, 3         @ test, clean, invalidate
@@ -338,6 +342,7 @@ ENTRY(cpu_arm1026_switch_mm)
         mcr     p15, 0, r1, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, r1, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
         
 /*
@@ -347,6 +352,7 @@ ENTRY(cpu_arm1026_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm1026_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -374,6 +380,7 @@ ENTRY(cpu_arm1026_set_pte)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
 
@@ -384,8 +391,10 @@ __arm1026_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
         mcr     p15, 0, r4, c2, c0              @ load page table pointer
+#endif
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mov     r0, #4                          @ explicitly disable writeback
         mcr     p15, 7, r0, c15, c0, 0
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 540359b475d0..7a705edfa4b2 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -2,6 +2,7 @@
  *  linux/arch/arm/mm/proc-arm6,7.S
  *
  *  Copyright (C) 1997-2000 Russell King
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -199,10 +200,12 @@ ENTRY(cpu_arm7_do_idle)
  */
 ENTRY(cpu_arm6_switch_mm)
 ENTRY(cpu_arm7_switch_mm)
+#ifdef CONFIG_MMU
                 mov     r1, #0
                 mcr     p15, 0, r1, c7, c0, 0           @ flush cache
                 mcr     p15, 0, r0, c2, c0, 0           @ update page table ptr
                 mcr     p15, 0, r1, c5, c0, 0           @ flush TLBs
+#endif
                 mov     pc, lr
 
 /*
@@ -214,6 +217,7 @@ ENTRY(cpu_arm7_switch_mm)
                 .align  5
 ENTRY(cpu_arm6_set_pte)
 ENTRY(cpu_arm7_set_pte)
+#ifdef CONFIG_MMU
                 str     r1, [r0], #-2048                @ linux version
 
                 eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -232,6 +236,7 @@ ENTRY(cpu_arm7_set_pte)
                 movne   r2, #0
 
                 str     r2, [r0]                        @ hardware version
+#endif /* CONFIG_MMU */
                 mov     pc, lr
 
 /*
@@ -243,7 +248,9 @@ ENTRY(cpu_arm6_reset)
 ENTRY(cpu_arm7_reset)
                 mov     r1, #0
                 mcr     p15, 0, r1, c7, c0, 0           @ flush cache
+#ifdef CONFIG_MMU
                 mcr     p15, 0, r1, c5, c0, 0           @ flush TLB
+#endif
                 mov     r1, #0x30
                 mcr     p15, 0, r1, c1, c0, 0           @ turn off MMU etc
                 mov     pc, r0
@@ -253,19 +260,27 @@ ENTRY(cpu_arm7_reset)
                 .type   __arm6_setup, #function
 __arm6_setup:   mov     r0, #0
                 mcr     p15, 0, r0, c7, c0              @ flush caches on v3
+#ifdef CONFIG_MMU
                 mcr     p15, 0, r0, c5, c0              @ flush TLBs on v3
                 mov     r0, #0x3d                       @ . ..RS BLDP WCAM
                 orr     r0, r0, #0x100                  @ . ..01 0011 1101
+#else
+                mov     r0, #0x3c                       @ . ..RS BLDP WCA.
+#endif
                 mov     pc, lr
                 .size   __arm6_setup, . - __arm6_setup
 
                 .type   __arm7_setup, #function
 __arm7_setup:   mov     r0, #0
                 mcr     p15, 0, r0, c7, c0              @ flush caches on v3
+#ifdef CONFIG_MMU
                 mcr     p15, 0, r0, c5, c0              @ flush TLBs on v3
                 mcr     p15, 0, r0, c3, c0              @ load domain access register
                 mov     r0, #0x7d                       @ . ..RS BLDP WCAM
                 orr     r0, r0, #0x100                  @ . ..01 0111 1101
+#else
+                mov     r0, #0x7c                       @ . ..RS BLDP WCA.
+#endif
                 mov     pc, lr
                 .size   __arm7_setup, . - __arm7_setup
 
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 26f00ee2ad9a..86102467d37f 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -4,6 +4,7 @@
  *  Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
  *                     Rob Scott (rscott@mtrob.fdns.net)
  *  Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2004.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +30,7 @@
  *                      out of 'proc-arm6,7.S' per RMK discussion
  *   07-25-2000 SJH     Added idle function.
  *   08-25-2000 DBS     Updated for integration of ARM Ltd version.
+ *   04-20-2004 HSC     modified for non-paged memory management mode.
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
@@ -75,10 +77,12 @@ ENTRY(cpu_arm720_do_idle)
  *           the new.
  */
 ENTRY(cpu_arm720_switch_mm)
+#ifdef CONFIG_MMU
                 mov     r1, #0
                 mcr     p15, 0, r1, c7, c7, 0           @ invalidate cache
                 mcr     p15, 0, r0, c2, c0, 0           @ update page table ptr
                 mcr     p15, 0, r1, c8, c7, 0           @ flush TLB (v4)
+#endif
                 mov     pc, lr
 
 /*
@@ -89,6 +93,7 @@ ENTRY(cpu_arm720_switch_mm)
  */
                 .align  5
 ENTRY(cpu_arm720_set_pte)
+#ifdef CONFIG_MMU
                 str     r1, [r0], #-2048                @ linux version
 
                 eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -107,6 +112,7 @@ ENTRY(cpu_arm720_set_pte)
                 movne   r2, #0
 
                 str     r2, [r0]                        @ hardware version
+#endif
                 mov     pc, lr
 
 /*
@@ -117,7 +123,9 @@ ENTRY(cpu_arm720_set_pte)
 ENTRY(cpu_arm720_reset)
                 mov     ip, #0
                 mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
+#ifdef CONFIG_MMU
                 mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
+#endif
                 mrc     p15, 0, ip, c1, c0, 0           @ get ctrl register
                 bic     ip, ip, #0x000f                 @ ............wcam
                 bic     ip, ip, #0x2100                 @ ..v....s........
@@ -130,7 +138,9 @@ ENTRY(cpu_arm720_reset)
 __arm710_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7, 0           @ invalidate caches
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7, 0           @ flush TLB (v4)
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register
         ldr     r5, arm710_cr1_clear
         bic     r0, r0, r5
@@ -156,7 +166,9 @@ arm710_cr1_set:
 __arm720_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7, 0           @ invalidate caches
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7, 0           @ flush TLB (v4)
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register
         ldr     r5, arm720_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index a17f79e0199c..31dc839ba07c 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 1999,2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -97,7 +98,9 @@ ENTRY(cpu_arm920_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -317,6 +320,7 @@ ENTRY(cpu_arm920_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm920_switch_mm)
+#ifdef CONFIG_MMU
         mov     ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, ip, c7, c6, 0           @ invalidate D cache
@@ -337,6 +341,7 @@ ENTRY(cpu_arm920_switch_mm)
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
 
 /*
@@ -346,6 +351,7 @@ ENTRY(cpu_arm920_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm920_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -372,6 +378,7 @@ ENTRY(cpu_arm920_set_pte)
         mov     r0, r0
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -381,7 +388,9 @@ __arm920_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, arm920_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index bbde4a024a48..9e57c34f5c09 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -4,6 +4,7 @@
  *  Copyright (C) 1999,2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *  Copyright (C) 2001 Altera Corporation
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -99,7 +100,9 @@ ENTRY(cpu_arm922_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -321,6 +324,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm922_switch_mm)
+#ifdef CONFIG_MMU
         mov     ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, ip, c7, c6, 0           @ invalidate D cache
@@ -341,6 +345,7 @@ ENTRY(cpu_arm922_switch_mm)
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
 
 /*
@@ -350,6 +355,7 @@ ENTRY(cpu_arm922_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm922_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -376,6 +382,7 @@ ENTRY(cpu_arm922_set_pte)
         mov     r0, r0
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -385,7 +392,9 @@ __arm922_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, arm922_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 224ce226a01b..8d47c9f3f931 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -9,6 +9,8 @@
  *  Update for Linux-2.6 and cache flush improvements
  *  Copyright (C) 2004 Nokia Corporation by Tony Lindgren <tony@atomide.com>
  *
+ *  hacked for non-paged-MM by Hyok S. Choi, 2004.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -122,7 +124,9 @@ ENTRY(cpu_arm925_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -369,6 +373,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm925_switch_mm)
+#ifdef CONFIG_MMU
         mov     ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, ip, c7, c6, 0           @ invalidate D cache
@@ -383,6 +388,7 @@ ENTRY(cpu_arm925_switch_mm)
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
 
 /*
@@ -392,6 +398,7 @@ ENTRY(cpu_arm925_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm925_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -420,6 +427,7 @@ ENTRY(cpu_arm925_set_pte)
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -438,7 +446,9 @@ __arm925_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
 
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mov     r0, #4                          @ disable write-back on caches explicitly
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 4e2a087cf388..cb4d8f33d2a3 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 1999-2001 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -85,7 +86,9 @@ ENTRY(cpu_arm926_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -329,6 +332,7 @@ ENTRY(cpu_arm926_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm926_switch_mm)
+#ifdef CONFIG_MMU
         mov     ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mcr     p15, 0, ip, c7, c6, 0           @ invalidate D cache
@@ -341,6 +345,7 @@ ENTRY(cpu_arm926_switch_mm)
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
 
 /*
@@ -350,6 +355,7 @@ ENTRY(cpu_arm926_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm926_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -378,6 +384,7 @@ ENTRY(cpu_arm926_set_pte)
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif
         mov     pc, lr
 
         __INIT
@@ -387,7 +394,9 @@ __arm926_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
 
 
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index a2dd5ae1077d..5a760a2c629c 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -2,6 +2,7 @@
  *  linux/arch/arm/mm/proc-sa110.S
  *
  *  Copyright (C) 1997-2002 Russell King
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -67,7 +68,9 @@ ENTRY(cpu_sa110_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -130,11 +133,15 @@ ENTRY(cpu_sa110_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_sa110_switch_mm)
+#ifdef CONFIG_MMU
         str     lr, [sp, #-4]!
         bl      v4wb_flush_kern_cache_all       @ clears IP
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
         ldr     pc, [sp], #4
+#else
+        mov     pc, lr
+#endif
 
 /*
  * cpu_sa110_set_pte(ptep, pte)
@@ -143,6 +150,7 @@ ENTRY(cpu_sa110_switch_mm)
  */
         .align  5
 ENTRY(cpu_sa110_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -164,6 +172,7 @@ ENTRY(cpu_sa110_set_pte)
         mov     r0, r0
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif
         mov     pc, lr
 
         __INIT
@@ -173,7 +182,9 @@ __sa110_setup:
         mov     r10, #0
         mcr     p15, 0, r10, c7, c7             @ invalidate I,D caches on v4
         mcr     p15, 0, r10, c7, c10, 4         @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r10, c8, c7             @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, sa110_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 777ad99c1439..0a2107ad4c32 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -2,6 +2,7 @@
  *  linux/arch/arm/mm/proc-sa1100.S
  *
  *  Copyright (C) 1997-2002 Russell King
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -77,7 +78,9 @@ ENTRY(cpu_sa1100_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -142,12 +145,16 @@ ENTRY(cpu_sa1100_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_sa1100_switch_mm)
+#ifdef CONFIG_MMU
         str     lr, [sp, #-4]!
         bl      v4wb_flush_kern_cache_all       @ clears IP
         mcr     p15, 0, ip, c9, c0, 0           @ invalidate RB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
         ldr     pc, [sp], #4
+#else
+        mov     pc, lr
+#endif
 
 /*
  * cpu_sa1100_set_pte(ptep, pte)
@@ -156,6 +163,7 @@ ENTRY(cpu_sa1100_switch_mm)
  */
         .align  5
 ENTRY(cpu_sa1100_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -177,6 +185,7 @@ ENTRY(cpu_sa1100_set_pte)
         mov     r0, r0
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif
         mov     pc, lr
 
         __INIT
@@ -186,7 +195,9 @@ __sa1100_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, sa1100_cr1_clear
         bic     r0, r0, r5
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 09b1a41a6de8..ca13d4d05f65 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -2,6 +2,7 @@
  *  linux/arch/arm/mm/proc-v6.S
  *
  *  Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *  Modified by Catalin Marinas for noMMU support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -88,6 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area)
  *      - we are not using split page tables
  */
 ENTRY(cpu_v6_switch_mm)
+#ifdef CONFIG_MMU
         mov     r2, #0
         ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
 #ifdef CONFIG_SMP
@@ -97,6 +99,7 @@ ENTRY(cpu_v6_switch_mm)
         mcr     p15, 0, r2, c7, c10, 4          @ drain write buffer
         mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
         mcr     p15, 0, r1, c13, c0, 1          @ set context ID
+#endif
         mov     pc, lr
 
 /*
@@ -119,6 +122,7 @@ ENTRY(cpu_v6_switch_mm)
  *        1111   0   1   1      r/w     r/w
  */
 ENTRY(cpu_v6_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         bic     r2, r1, #0x000003f0
@@ -145,6 +149,7 @@ ENTRY(cpu_v6_set_pte)
 
         str     r2, [r0]
         mcr     p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
         mov     pc, lr
 
 
@@ -194,12 +199,14 @@ __v6_setup:
         mcr     p15, 0, r0, c7, c5, 0           @ invalidate I cache
         mcr     p15, 0, r0, c7, c15, 0          @ clean+invalidate cache
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7, 0           @ invalidate I + D TLBs
         mcr     p15, 0, r0, c2, c0, 2           @ TTB control register
 #ifdef CONFIG_SMP
         orr     r4, r4, #TTB_RGN_WBWA|TTB_S     @ mark PTWs shared, outer cacheable
 #endif
         mcr     p15, 0, r4, c2, c0, 1           @ load TTB1
+#endif /* CONFIG_MMU */
 #ifdef CONFIG_VFP
         mrc     p15, 0, r0, c1, c0, 2
         orr     r0, r0, #(0xf << 20)
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index c703bc7b0880..9eec9435318e 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -60,6 +60,12 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs)
         u32 *isp;
 #endif
 
+        if (unlikely((unsigned)irq >= NR_IRQS)) {
+                printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+                                        __FUNCTION__, irq);
+                BUG();
+        }
+
         irq_enter();
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
         /* Debugging check for stack overflow: is there less than 1KB free? */
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 766bf4955432..9d1cffb57cde 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -114,7 +114,7 @@ CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
 CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
-CONFIG_NR_CPUS=4
+CONFIG_NR_CPUS=16
 CONFIG_HOTPLUG_CPU=y
 CONFIG_PERMIT_BSP_REMOVE=y
 CONFIG_FORCE_CPEI_RETARGET=y
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 303a9afcf2a1..8a1208419138 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -998,7 +998,7 @@ palinfo_init(void)
         }
 
         /* Register for future delivery via notify registration */
-        register_cpu_notifier(&palinfo_cpu_notifier);
+        register_hotcpu_notifier(&palinfo_cpu_notifier);
 
         return 0;
 }
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 93577abae36d..3bfccf354343 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -458,7 +458,7 @@ void __init sn_setup(char **cmdline_p)
          * support here so we don't have to listen to failed keyboard probe
          * messages.
          */
-        if (version <= 0x0209 && acpi_kbd_controller_present) {
+        if (is_shub1() && version <= 0x0209 && acpi_kbd_controller_present) {
                 printk(KERN_INFO "Disabling legacy keyboard support as prom "
                        "is too old and doesn't provide FADT\n");
                 acpi_kbd_controller_present = 0;
@@ -577,7 +577,8 @@ void __init sn_cpu_init(void)
         int i;
         static int wars_have_been_checked;
 
-        if (smp_processor_id() == 0 && IS_MEDUSA()) {
+        cpuid = smp_processor_id();
+        if (cpuid == 0 && IS_MEDUSA()) {
                 if (ia64_sn_is_fake_prom())
                         sn_prom_type = 2;
                 else
@@ -597,6 +598,12 @@ void __init sn_cpu_init(void)
         sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
 
         /*
+         * Don't check status. The SAL call is not supported on all PROMs
+         * but a failure is harmless.
+         */
+        (void) ia64_sn_set_cpu_number(cpuid);
+
+        /*
          * The boot cpu makes this call again after platform initialization is
          * complete.
          */
@@ -607,7 +614,6 @@ void __init sn_cpu_init(void)
                 if (ia64_sn_get_prom_feature_set(i, &sn_prom_features[i]) != 0)
                         break;
 
-        cpuid = smp_processor_id();
         cpuphyid = get_sapicid();
 
         if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice))
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 20de72791b97..e4aa839d0189 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -595,7 +595,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 
         /* sanity check prom rev */
 
-        if (sn_sal_rev() < 0x0406) {
+        if (is_shub1() && sn_sal_rev() < 0x0406) {
                 printk
                     (KERN_ERR "%s:  SGI prom rev 4.06 or greater required "
                      "for tioca support\n", __FUNCTION__);
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8b6e723eb82b..e767f2ddae72 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -540,6 +540,59 @@ config RAM32BIT
 
 endchoice
 
+comment "ROM configuration"
+
+config ROM
+        bool "Specify ROM linker regions"
+        default n
+        help
+          Define a ROM region for the linker script. This creates a kernel
+          that can be stored in flash, with possibly the text, and data
+          regions being copied out to RAM at startup.
+
+config ROMBASE
+        hex "Address of the base of ROM device"
+        default "0"
+        depends on ROM
+        help
+          Define the address that the ROM region starts at. Some platforms
+          use this to set their chip select region accordingly for the boot
+          device.
+
+config ROMVEC
+        hex "Address of the base of the ROM vectors"
+        default "0"
+        depends on ROM
+        help
+          This is almost always the same as the base of the ROM. Since on all
+          68000 type varients the vectors are at the base of the boot device
+          on system startup.
+
+config ROMVECSIZE
+        hex "Size of ROM vector region (in bytes)"
+        default "0x400"
+        depends on ROM
+        help
+          Define the size of the vector region in ROM. For most 68000
+          varients this would be 0x400 bytes in size. Set to 0 if you do
+          not want a vector region at the start of the ROM.
+
+config ROMSTART
+        hex "Address of the base of system image in ROM"
+        default "0x400"
+        depends on ROM
+        help
+          Define the start address of the system image in ROM. Commonly this
+          is strait after the ROM vectors.
+
+config ROMSIZE
+        hex "Size of the ROM device"
+        default "0x100000"
+        depends on ROM
+        help
+          Size of the ROM device. On some platforms this is used to setup
+          the chip select that controls the boot ROM device.
+
 choice
         prompt "Kernel executes from"
         ---help---
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 6a2f0c693254..59ced831b792 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -3,63 +3,13 @@
  *
  *      (C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com>
  *
- *      This ends up looking compilcated, because of the number of
- *      address variations for ram and rom/flash layouts. The real
- *      work of the linker script is all at the end, and reasonably
- *      strait forward.
+ *      This linker script is equiped to build either ROM loaded or RAM
+ *      run kernels.
  */
 
 #include <linux/config.h>
 #include <asm-generic/vmlinux.lds.h>
 
-/*
- *      Original Palm pilot (same for Xcopilot).
- *      There is really only a rom target for this.
- */
-#ifdef CONFIG_PILOT3
-#define ROMVEC_START    0x10c00000
-#define ROMVEC_LENGTH   0x10400
-#define ROM_START       0x10c10400
-#define ROM_LENGTH      0xfec00
-#define ROM_END         0x10d00000
-#define DATA_ADDR       CONFIG_KERNELBASE
-#endif
-
-/*
- *      Same setup on both the uCsimm and uCdimm.
- */
-#if defined(CONFIG_UCSIMM) || defined(CONFIG_UCDIMM)
-#ifdef CONFIG_RAMKERNEL
-#define ROMVEC_START    0x10c10000
-#define ROMVEC_LENGTH   0x400
-#define ROM_START       0x10c10400
-#define ROM_LENGTH      0x1efc00
-#define ROM_END         0x10e00000
-#endif
-#ifdef CONFIG_ROMKERNEL
-#define ROMVEC_START    0x10c10000
-#define ROMVEC_LENGTH   0x400
-#define ROM_START       0x10c10400
-#define ROM_LENGTH      0x1efc00
-#define ROM_END         0x10e00000
-#endif
-#ifdef CONFIG_HIMEMKERNEL
-#define ROMVEC_START    0x00600000
-#define ROMVEC_LENGTH   0x400
-#define ROM_START       0x00600400
-#define ROM_LENGTH      0x1efc00
-#define ROM_END         0x007f0000
-#endif
-#endif
-
-#ifdef CONFIG_UCQUICC
-#define ROMVEC_START    0x00000000
-#define ROMVEC_LENGTH   0x404
-#define ROM_START       0x00000404
-#define ROM_LENGTH      0x1ff6fc
-#define ROM_END         0x00200000
-#endif
-
 #if defined(CONFIG_RAMKERNEL)
 #define RAM_START       CONFIG_KERNELBASE
 #define RAM_LENGTH      (CONFIG_RAMBASE + CONFIG_RAMSIZE - CONFIG_KERNELBASE)
@@ -71,6 +21,10 @@
 #if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
 #define RAM_START       CONFIG_RAMBASE
 #define RAM_LENGTH      CONFIG_RAMSIZE
+#define ROMVEC_START    CONFIG_ROMVEC
+#define ROMVEC_LENGTH   CONFIG_ROMVECSIZE
+#define ROM_START       CONFIG_ROMSTART
+#define ROM_LENGTH      CONFIG_ROMSIZE
 #define TEXT            rom
 #define DATA            ram
 #define INIT            ram
@@ -90,7 +44,6 @@ MEMORY {
 #ifdef ROM_START
         romvec  : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
         rom     : ORIGIN = ROM_START, LENGTH = ROM_LENGTH
-        erom    : ORIGIN = ROM_END, LENGTH = 0
 #endif
 }
 
@@ -167,13 +120,6 @@ SECTIONS {
                 _etext = . ;
         } > TEXT
 
-#ifdef ROM_END
-        . = ROM_END ;
-        .erom : {
-                __rom_end = . ;
-        } > erom
-#endif
-
         .data DATA_ADDR : {
                 . = ALIGN(4);
                 _sdata = . ;
diff --git a/arch/m68knommu/platform/68328/Makefile b/arch/m68knommu/platform/68328/Makefile
index 1b3b719e4479..5e5435552d56 100644
--- a/arch/m68knommu/platform/68328/Makefile
+++ b/arch/m68knommu/platform/68328/Makefile
@@ -8,6 +8,7 @@ head-$(CONFIG_DRAGEN2)	= head-de2.o
 
 obj-y                   += entry.o ints.o timers.o
 obj-$(CONFIG_M68328)    += config.o
+obj-$(CONFIG_ROM)       += romvec.o
 
 extra-y                 := head.o
 extra-$(CONFIG_M68328)  += bootlogo.rh head.o
diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index 7437217813d2..2dda7339aae5 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -18,6 +18,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/irqnode.h>
 #include <asm/traps.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
@@ -82,25 +83,6 @@ unsigned int local_irq_count[NR_CPUS];
 /* irq node variables for the 32 (potential) on chip sources */
 static irq_node_t int_irq_list[NR_IRQS];
 
-#if !defined(CONFIG_DRAGEN2)
-asm (".global _start, __ramend/n/t"
-     ".section .romvec/n"
-     "e_vectors:\n\t"
-     ".long __ramend-4, _start, buserr, trap, trap, trap, trap, trap\n\t"
-     ".long trap, trap, trap, trap, trap, trap, trap, trap\n\t"
-     ".long trap, trap, trap, trap, trap, trap, trap, trap\n\t"
-     ".long trap, trap, trap, trap\n\t"
-     ".long trap, trap, trap, trap\n\t"
-        /*.long inthandler, inthandler, inthandler, inthandler
-        .long inthandler4, inthandler, inthandler, inthandler   */
-        /* TRAP #0-15 */
-     ".long system_call, trap, trap, trap, trap, trap, trap, trap\n\t"
-     ".long trap, trap, trap, trap, trap, trap, trap, trap\n\t"
-     ".long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0\n\t"
-     ".text\n"
-     "ignore: rte");
-#endif
-
 /*
  * This function should be called during kernel startup to initialize
  * the IRQ handling routines.
diff --git a/arch/m68knommu/platform/68328/romvec.S b/arch/m68knommu/platform/68328/romvec.S
new file mode 100644
index 000000000000..3e7fe1e14913
--- /dev/null
+++ b/arch/m68knommu/platform/68328/romvec.S
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/m68knommu/platform/68328/romvec.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com>
+ * Copyright 2006 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/config.h>
+
+.global _start
+.global _buserr
+.global trap
+.global system_call
+
+.section .romvec
+
+e_vectors:
+.long CONFIG_RAMBASE+CONFIG_RAMSIZE-4, _start, buserr, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+/* TRAP #0-15 */
+.long system_call, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long trap, trap, trap, trap
+.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+
diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c
index 3db244625f0f..69c670dfd62b 100644
--- a/arch/m68knommu/platform/68360/config.c
+++ b/arch/m68knommu/platform/68360/config.c
@@ -141,13 +141,13 @@ int BSP_set_clock_mmss (unsigned long nowtime)
 void BSP_reset (void)
 {
   local_irq_disable();
-  asm volatile ("
-    moveal #_start, %a0;
-    moveb #0, 0xFFFFF300;
-    moveal 0(%a0), %sp;
-    moveal 4(%a0), %a0;
-    jmp (%a0);
-    ");
+  asm volatile (
+    "moveal #_start, %a0;\n"
+    "moveb #0, 0xFFFFF300;\n"
+    "moveal 0(%a0), %sp;\n"
+    "moveal 4(%a0), %a0;\n"
+    "jmp (%a0);\n"
+    );
 }
 
 unsigned char *scc1_hwaddr;
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index ba184db1651b..0245fc4a4781 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -20,6 +20,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/irqnode.h>
 #include <asm/traps.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
diff --git a/arch/m68knommu/platform/68EZ328/config.c b/arch/m68knommu/platform/68EZ328/config.c
index d8d56e5de310..15a14a67c2bf 100644
--- a/arch/m68knommu/platform/68EZ328/config.c
+++ b/arch/m68knommu/platform/68EZ328/config.c
@@ -42,13 +42,13 @@ void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int
 void m68ez328_reset(void)
 {
   local_irq_disable();
-  asm volatile ("
-    moveal #0x10c00000, %a0;
-    moveb #0, 0xFFFFF300;
-    moveal 0(%a0), %sp;
-    moveal 4(%a0), %a0;
-    jmp (%a0);
-    ");
+  asm volatile (
+    "moveal #0x10c00000, %a0;\n"
+    "moveb #0, 0xFFFFF300;\n"
+    "moveal 0(%a0), %sp;\n"
+    "moveal 4(%a0), %a0;\n"
+    "jmp (%a0);\n"
+    );
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/68VZ328/config.c b/arch/m68knommu/platform/68VZ328/config.c
index d926524cdf82..4058de5c8fa2 100644
--- a/arch/m68knommu/platform/68VZ328/config.c
+++ b/arch/m68knommu/platform/68VZ328/config.c
@@ -141,13 +141,13 @@ static void init_hardware(char *command, int size)
 static void m68vz328_reset(void)
 {
         local_irq_disable();
-        asm volatile ("
-                moveal #0x10c00000, %a0;
-                moveb #0, 0xFFFFF300;
-                moveal 0(%a0), %sp;
-                moveal 4(%a0), %a0;
-                jmp (%a0);
-        ");
+        asm volatile (
+                "moveal #0x10c00000, %a0;\n\t"
+                "moveb #0, 0xFFFFF300;\n\t"
+                "moveal 0(%a0), %sp;\n\t"
+                "moveal 4(%a0), %a0;\n\t"
+                "jmp (%a0);\n"
+        );
 }
 
 unsigned char *cs8900a_hwaddr;
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index 498b042e1837..c7a27eddca6d 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -119,7 +119,14 @@ int pmac_backlight_set_legacy_brightness(int brightness)
                 down(&pmac_backlight->sem);
                 props = pmac_backlight->props;
                 props->brightness = brightness *
-                        props->max_brightness / OLD_BACKLIGHT_MAX;
+                        (props->max_brightness + 1) /
+                        (OLD_BACKLIGHT_MAX + 1);
+
+                if (props->brightness > props->max_brightness)
+                        props->brightness = props->max_brightness;
+                else if (props->brightness < 0)
+                        props->brightness = 0;
+
                 props->update_status(pmac_backlight);
                 up(&pmac_backlight->sem);
 
@@ -140,8 +147,11 @@ int pmac_backlight_get_legacy_brightness()
 
                 down(&pmac_backlight->sem);
                 props = pmac_backlight->props;
+
                 result = props->brightness *
-                        OLD_BACKLIGHT_MAX / props->max_brightness;
+                        (OLD_BACKLIGHT_MAX + 1) /
+                        (props->max_brightness + 1);
+
                 up(&pmac_backlight->sem);
         }
         mutex_unlock(&pmac_backlight_mutex);
diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c
index 3be0a7e4bf08..bfa82f52a5cc 100644
--- a/arch/x86_64/kernel/irq.c
+++ b/arch/x86_64/kernel/irq.c
@@ -118,6 +118,12 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
         /* high bit used in ret_from_ code  */
         unsigned irq = ~regs->orig_rax;
 
+        if (unlikely(irq >= NR_IRQS)) {
+                printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+                                        __FUNCTION__, irq);
+                BUG();
+        }
+
         exit_idle();
         irq_enter();
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 399489c93132..0ef9cf2bc45e 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -607,11 +607,13 @@ void set_nmi_callback(nmi_callback_t callback)
         vmalloc_sync_all();
         rcu_assign_pointer(nmi_callback, callback);
 }
+EXPORT_SYMBOL_GPL(set_nmi_callback);
 
 void unset_nmi_callback(void)
 {
         nmi_callback = dummy_nmi_callback;
 }
+EXPORT_SYMBOL_GPL(unset_nmi_callback);
 
 #ifdef CONFIG_SYSCTL