diff options
Diffstat (limited to 'arch')
59 files changed, 421 insertions, 149 deletions
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1467750e3377..e8c6c600a5b6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi | |||
| @@ -953,6 +953,8 @@ | |||
| 953 | interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; | 953 | interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; |
| 954 | pinctrl-names = "default"; | 954 | pinctrl-names = "default"; |
| 955 | pinctrl-0 = <&pinctrl_fb>; | 955 | pinctrl-0 = <&pinctrl_fb>; |
| 956 | clocks = <&lcd_clk>, <&lcd_clk>; | ||
| 957 | clock-names = "lcdc_clk", "hclk"; | ||
| 956 | status = "disabled"; | 958 | status = "disabled"; |
| 957 | }; | 959 | }; |
| 958 | 960 | ||
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 28e7e2060c33..a98ac1bd8f65 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts | |||
| @@ -65,6 +65,8 @@ | |||
| 65 | }; | 65 | }; |
| 66 | 66 | ||
| 67 | &sdhci2 { | 67 | &sdhci2 { |
| 68 | broken-cd; | ||
| 69 | bus-width = <8>; | ||
| 68 | non-removable; | 70 | non-removable; |
| 69 | status = "okay"; | 71 | status = "okay"; |
| 70 | }; | 72 | }; |
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 35253c947a7c..e2f61f27944e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi | |||
| @@ -83,7 +83,8 @@ | |||
| 83 | compatible = "mrvl,pxav3-mmc"; | 83 | compatible = "mrvl,pxav3-mmc"; |
| 84 | reg = <0xab1000 0x200>; | 84 | reg = <0xab1000 0x200>; |
| 85 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; | 85 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 86 | clocks = <&chip CLKID_SDIO1XIN>; | 86 | clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; |
| 87 | clock-names = "io", "core"; | ||
| 87 | status = "disabled"; | 88 | status = "disabled"; |
| 88 | }; | 89 | }; |
| 89 | 90 | ||
| @@ -348,36 +349,6 @@ | |||
| 348 | interrupt-parent = <&gic>; | 349 | interrupt-parent = <&gic>; |
| 349 | interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; | 350 | interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 350 | }; | 351 | }; |
| 351 | |||
| 352 | gpio4: gpio@5000 { | ||
| 353 | compatible = "snps,dw-apb-gpio"; | ||
| 354 | reg = <0x5000 0x400>; | ||
| 355 | #address-cells = <1>; | ||
| 356 | #size-cells = <0>; | ||
| 357 | |||
| 358 | porte: gpio-port@4 { | ||
| 359 | compatible = "snps,dw-apb-gpio-port"; | ||
| 360 | gpio-controller; | ||
| 361 | #gpio-cells = <2>; | ||
| 362 | snps,nr-gpios = <32>; | ||
| 363 | reg = <0>; | ||
| 364 | }; | ||
| 365 | }; | ||
| 366 | |||
| 367 | gpio5: gpio@c000 { | ||
| 368 | compatible = "snps,dw-apb-gpio"; | ||
| 369 | reg = <0xc000 0x400>; | ||
| 370 | #address-cells = <1>; | ||
| 371 | #size-cells = <0>; | ||
| 372 | |||
| 373 | portf: gpio-port@5 { | ||
| 374 | compatible = "snps,dw-apb-gpio-port"; | ||
| 375 | gpio-controller; | ||
| 376 | #gpio-cells = <2>; | ||
| 377 | snps,nr-gpios = <32>; | ||
| 378 | reg = <0>; | ||
| 379 | }; | ||
| 380 | }; | ||
| 381 | }; | 352 | }; |
| 382 | 353 | ||
| 383 | chip: chip-control@ea0000 { | 354 | chip: chip-control@ea0000 { |
| @@ -466,6 +437,21 @@ | |||
| 466 | ranges = <0 0xfc0000 0x10000>; | 437 | ranges = <0 0xfc0000 0x10000>; |
| 467 | interrupt-parent = <&sic>; | 438 | interrupt-parent = <&sic>; |
| 468 | 439 | ||
| 440 | sm_gpio1: gpio@5000 { | ||
| 441 | compatible = "snps,dw-apb-gpio"; | ||
| 442 | reg = <0x5000 0x400>; | ||
| 443 | #address-cells = <1>; | ||
| 444 | #size-cells = <0>; | ||
| 445 | |||
| 446 | portf: gpio-port@5 { | ||
| 447 | compatible = "snps,dw-apb-gpio-port"; | ||
| 448 | gpio-controller; | ||
| 449 | #gpio-cells = <2>; | ||
| 450 | snps,nr-gpios = <32>; | ||
| 451 | reg = <0>; | ||
| 452 | }; | ||
| 453 | }; | ||
| 454 | |||
| 469 | i2c2: i2c@7000 { | 455 | i2c2: i2c@7000 { |
| 470 | compatible = "snps,designware-i2c"; | 456 | compatible = "snps,designware-i2c"; |
| 471 | #address-cells = <1>; | 457 | #address-cells = <1>; |
| @@ -516,6 +502,21 @@ | |||
| 516 | status = "disabled"; | 502 | status = "disabled"; |
| 517 | }; | 503 | }; |
| 518 | 504 | ||
| 505 | sm_gpio0: gpio@c000 { | ||
| 506 | compatible = "snps,dw-apb-gpio"; | ||
| 507 | reg = <0xc000 0x400>; | ||
| 508 | #address-cells = <1>; | ||
| 509 | #size-cells = <0>; | ||
| 510 | |||
| 511 | porte: gpio-port@4 { | ||
| 512 | compatible = "snps,dw-apb-gpio-port"; | ||
| 513 | gpio-controller; | ||
| 514 | #gpio-cells = <2>; | ||
| 515 | snps,nr-gpios = <32>; | ||
| 516 | reg = <0>; | ||
| 517 | }; | ||
| 518 | }; | ||
| 519 | |||
| 519 | sysctrl: pin-controller@d000 { | 520 | sysctrl: pin-controller@d000 { |
| 520 | compatible = "marvell,berlin2q-system-ctrl"; | 521 | compatible = "marvell,berlin2q-system-ctrl"; |
| 521 | reg = <0xd000 0x100>; | 522 | reg = <0xd000 0x100>; |
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 10b725c7bfc0..ad4118f7e1a6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts | |||
| @@ -499,23 +499,23 @@ | |||
| 499 | }; | 499 | }; |
| 500 | partition@5 { | 500 | partition@5 { |
| 501 | label = "QSPI.u-boot-spl-os"; | 501 | label = "QSPI.u-boot-spl-os"; |
| 502 | reg = <0x00140000 0x00010000>; | 502 | reg = <0x00140000 0x00080000>; |
| 503 | }; | 503 | }; |
| 504 | partition@6 { | 504 | partition@6 { |
| 505 | label = "QSPI.u-boot-env"; | 505 | label = "QSPI.u-boot-env"; |
| 506 | reg = <0x00150000 0x00010000>; | 506 | reg = <0x001c0000 0x00010000>; |
| 507 | }; | 507 | }; |
| 508 | partition@7 { | 508 | partition@7 { |
| 509 | label = "QSPI.u-boot-env.backup1"; | 509 | label = "QSPI.u-boot-env.backup1"; |
| 510 | reg = <0x00160000 0x0010000>; | 510 | reg = <0x001d0000 0x0010000>; |
| 511 | }; | 511 | }; |
| 512 | partition@8 { | 512 | partition@8 { |
| 513 | label = "QSPI.kernel"; | 513 | label = "QSPI.kernel"; |
| 514 | reg = <0x00170000 0x0800000>; | 514 | reg = <0x001e0000 0x0800000>; |
| 515 | }; | 515 | }; |
| 516 | partition@9 { | 516 | partition@9 { |
| 517 | label = "QSPI.file-system"; | 517 | label = "QSPI.file-system"; |
| 518 | reg = <0x00970000 0x01690000>; | 518 | reg = <0x009e0000 0x01620000>; |
| 519 | }; | 519 | }; |
| 520 | }; | 520 | }; |
| 521 | }; | 521 | }; |
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 22771bc1643a..63f8b007bdc5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi | |||
| @@ -1257,6 +1257,8 @@ | |||
| 1257 | tx-fifo-resize; | 1257 | tx-fifo-resize; |
| 1258 | maximum-speed = "super-speed"; | 1258 | maximum-speed = "super-speed"; |
| 1259 | dr_mode = "otg"; | 1259 | dr_mode = "otg"; |
| 1260 | snps,dis_u3_susphy_quirk; | ||
| 1261 | snps,dis_u2_susphy_quirk; | ||
| 1260 | }; | 1262 | }; |
| 1261 | }; | 1263 | }; |
| 1262 | 1264 | ||
| @@ -1278,6 +1280,8 @@ | |||
| 1278 | tx-fifo-resize; | 1280 | tx-fifo-resize; |
| 1279 | maximum-speed = "high-speed"; | 1281 | maximum-speed = "high-speed"; |
| 1280 | dr_mode = "otg"; | 1282 | dr_mode = "otg"; |
| 1283 | snps,dis_u3_susphy_quirk; | ||
| 1284 | snps,dis_u2_susphy_quirk; | ||
| 1281 | }; | 1285 | }; |
| 1282 | }; | 1286 | }; |
| 1283 | 1287 | ||
| @@ -1299,6 +1303,8 @@ | |||
| 1299 | tx-fifo-resize; | 1303 | tx-fifo-resize; |
| 1300 | maximum-speed = "high-speed"; | 1304 | maximum-speed = "high-speed"; |
| 1301 | dr_mode = "otg"; | 1305 | dr_mode = "otg"; |
| 1306 | snps,dis_u3_susphy_quirk; | ||
| 1307 | snps,dis_u2_susphy_quirk; | ||
| 1302 | }; | 1308 | }; |
| 1303 | }; | 1309 | }; |
| 1304 | 1310 | ||
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0a229fcd7acf..d75c89d7666a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi | |||
| @@ -736,7 +736,7 @@ | |||
| 736 | 736 | ||
| 737 | dp_phy: video-phy@10040720 { | 737 | dp_phy: video-phy@10040720 { |
| 738 | compatible = "samsung,exynos5250-dp-video-phy"; | 738 | compatible = "samsung,exynos5250-dp-video-phy"; |
| 739 | reg = <0x10040720 4>; | 739 | samsung,pmu-syscon = <&pmu_system_controller>; |
| 740 | #phy-cells = <0>; | 740 | #phy-cells = <0>; |
| 741 | }; | 741 | }; |
| 742 | 742 | ||
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index aa7a7d727a7e..db2c1c4cd900 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts | |||
| @@ -372,3 +372,7 @@ | |||
| 372 | &usbdrd_dwc3_1 { | 372 | &usbdrd_dwc3_1 { |
| 373 | dr_mode = "host"; | 373 | dr_mode = "host"; |
| 374 | }; | 374 | }; |
| 375 | |||
| 376 | &cci { | ||
| 377 | status = "disabled"; | ||
| 378 | }; | ||
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 517e50f6760b..6d38f8bfd0e6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi | |||
| @@ -120,7 +120,7 @@ | |||
| 120 | }; | 120 | }; |
| 121 | }; | 121 | }; |
| 122 | 122 | ||
| 123 | cci@10d20000 { | 123 | cci: cci@10d20000 { |
| 124 | compatible = "arm,cci-400"; | 124 | compatible = "arm,cci-400"; |
| 125 | #address-cells = <1>; | 125 | #address-cells = <1>; |
| 126 | #size-cells = <1>; | 126 | #size-cells = <1>; |
| @@ -503,8 +503,8 @@ | |||
| 503 | }; | 503 | }; |
| 504 | 504 | ||
| 505 | dp_phy: video-phy@10040728 { | 505 | dp_phy: video-phy@10040728 { |
| 506 | compatible = "samsung,exynos5250-dp-video-phy"; | 506 | compatible = "samsung,exynos5420-dp-video-phy"; |
| 507 | reg = <0x10040728 4>; | 507 | samsung,pmu-syscon = <&pmu_system_controller>; |
| 508 | #phy-cells = <0>; | 508 | #phy-cells = <0>; |
| 509 | }; | 509 | }; |
| 510 | 510 | ||
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 58d3c3cf2923..e4d3aecc4ed2 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi | |||
| @@ -162,7 +162,7 @@ | |||
| 162 | #size-cells = <0>; | 162 | #size-cells = <0>; |
| 163 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; | 163 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| 164 | reg = <0x43fa4000 0x4000>; | 164 | reg = <0x43fa4000 0x4000>; |
| 165 | clocks = <&clks 62>, <&clks 62>; | 165 | clocks = <&clks 78>, <&clks 78>; |
| 166 | clock-names = "ipg", "per"; | 166 | clock-names = "ipg", "per"; |
| 167 | interrupts = <14>; | 167 | interrupts = <14>; |
| 168 | status = "disabled"; | 168 | status = "disabled"; |
| @@ -369,7 +369,7 @@ | |||
| 369 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | 369 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 370 | #pwm-cells = <2>; | 370 | #pwm-cells = <2>; |
| 371 | reg = <0x53fa0000 0x4000>; | 371 | reg = <0x53fa0000 0x4000>; |
| 372 | clocks = <&clks 106>, <&clks 36>; | 372 | clocks = <&clks 106>, <&clks 52>; |
| 373 | clock-names = "ipg", "per"; | 373 | clock-names = "ipg", "per"; |
| 374 | interrupts = <36>; | 374 | interrupts = <36>; |
| 375 | }; | 375 | }; |
| @@ -388,7 +388,7 @@ | |||
| 388 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | 388 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 389 | #pwm-cells = <2>; | 389 | #pwm-cells = <2>; |
| 390 | reg = <0x53fa8000 0x4000>; | 390 | reg = <0x53fa8000 0x4000>; |
| 391 | clocks = <&clks 107>, <&clks 36>; | 391 | clocks = <&clks 107>, <&clks 52>; |
| 392 | clock-names = "ipg", "per"; | 392 | clock-names = "ipg", "per"; |
| 393 | interrupts = <41>; | 393 | interrupts = <41>; |
| 394 | }; | 394 | }; |
| @@ -429,7 +429,7 @@ | |||
| 429 | pwm4: pwm@53fc8000 { | 429 | pwm4: pwm@53fc8000 { |
| 430 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | 430 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 431 | reg = <0x53fc8000 0x4000>; | 431 | reg = <0x53fc8000 0x4000>; |
| 432 | clocks = <&clks 108>, <&clks 36>; | 432 | clocks = <&clks 108>, <&clks 52>; |
| 433 | clock-names = "ipg", "per"; | 433 | clock-names = "ipg", "per"; |
| 434 | interrupts = <42>; | 434 | interrupts = <42>; |
| 435 | }; | 435 | }; |
| @@ -476,7 +476,7 @@ | |||
| 476 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; | 476 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 477 | #pwm-cells = <2>; | 477 | #pwm-cells = <2>; |
| 478 | reg = <0x53fe0000 0x4000>; | 478 | reg = <0x53fe0000 0x4000>; |
| 479 | clocks = <&clks 105>, <&clks 36>; | 479 | clocks = <&clks 105>, <&clks 52>; |
| 480 | clock-names = "ipg", "per"; | 480 | clock-names = "ipg", "per"; |
| 481 | interrupts = <26>; | 481 | interrupts = <26>; |
| 482 | }; | 482 | }; |
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts | |||
| @@ -127,24 +127,12 @@ | |||
| 127 | #address-cells = <1>; | 127 | #address-cells = <1>; |
| 128 | #size-cells = <0>; | 128 | #size-cells = <0>; |
| 129 | 129 | ||
| 130 | reg_usbh1_vbus: regulator@0 { | 130 | reg_hub_reset: regulator@0 { |
| 131 | compatible = "regulator-fixed"; | ||
| 132 | pinctrl-names = "default"; | ||
| 133 | pinctrl-0 = <&pinctrl_usbh1reg>; | ||
| 134 | reg = <0>; | ||
| 135 | regulator-name = "usbh1_vbus"; | ||
| 136 | regulator-min-microvolt = <5000000>; | ||
| 137 | regulator-max-microvolt = <5000000>; | ||
| 138 | gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; | ||
| 139 | enable-active-high; | ||
| 140 | }; | ||
| 141 | |||
| 142 | reg_usbotg_vbus: regulator@1 { | ||
| 143 | compatible = "regulator-fixed"; | 131 | compatible = "regulator-fixed"; |
| 144 | pinctrl-names = "default"; | 132 | pinctrl-names = "default"; |
| 145 | pinctrl-0 = <&pinctrl_usbotgreg>; | 133 | pinctrl-0 = <&pinctrl_usbotgreg>; |
| 146 | reg = <1>; | 134 | reg = <0>; |
| 147 | regulator-name = "usbotg_vbus"; | 135 | regulator-name = "hub_reset"; |
| 148 | regulator-min-microvolt = <5000000>; | 136 | regulator-min-microvolt = <5000000>; |
| 149 | regulator-max-microvolt = <5000000>; | 137 | regulator-max-microvolt = <5000000>; |
| 150 | gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; | 138 | gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| @@ -176,6 +164,7 @@ | |||
| 176 | reg = <0>; | 164 | reg = <0>; |
| 177 | clocks = <&clks IMX5_CLK_DUMMY>; | 165 | clocks = <&clks IMX5_CLK_DUMMY>; |
| 178 | clock-names = "main_clk"; | 166 | clock-names = "main_clk"; |
| 167 | reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; | ||
| 179 | }; | 168 | }; |
| 180 | }; | 169 | }; |
| 181 | }; | 170 | }; |
| @@ -419,7 +408,7 @@ | |||
| 419 | &usbh1 { | 408 | &usbh1 { |
| 420 | pinctrl-names = "default"; | 409 | pinctrl-names = "default"; |
| 421 | pinctrl-0 = <&pinctrl_usbh1>; | 410 | pinctrl-0 = <&pinctrl_usbh1>; |
| 422 | vbus-supply = <®_usbh1_vbus>; | 411 | vbus-supply = <®_hub_reset>; |
| 423 | fsl,usbphy = <&usbh1phy>; | 412 | fsl,usbphy = <&usbh1phy>; |
| 424 | phy_type = "ulpi"; | 413 | phy_type = "ulpi"; |
| 425 | status = "okay"; | 414 | status = "okay"; |
| @@ -429,7 +418,6 @@ | |||
| 429 | dr_mode = "otg"; | 418 | dr_mode = "otg"; |
| 430 | disable-over-current; | 419 | disable-over-current; |
| 431 | phy_type = "utmi_wide"; | 420 | phy_type = "utmi_wide"; |
| 432 | vbus-supply = <®_usbotg_vbus>; | ||
| 433 | status = "okay"; | 421 | status = "okay"; |
| 434 | }; | 422 | }; |
| 435 | 423 | ||
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4fc03b7f1cee..2109d0763c1b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi | |||
| @@ -335,8 +335,8 @@ | |||
| 335 | vpu: vpu@02040000 { | 335 | vpu: vpu@02040000 { |
| 336 | compatible = "cnm,coda960"; | 336 | compatible = "cnm,coda960"; |
| 337 | reg = <0x02040000 0x3c000>; | 337 | reg = <0x02040000 0x3c000>; |
| 338 | interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, | 338 | interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, |
| 339 | <0 12 IRQ_TYPE_LEVEL_HIGH>; | 339 | <0 3 IRQ_TYPE_LEVEL_HIGH>; |
| 340 | interrupt-names = "bit", "jpeg"; | 340 | interrupt-names = "bit", "jpeg"; |
| 341 | clocks = <&clks IMX6QDL_CLK_VPU_AXI>, | 341 | clocks = <&clks IMX6QDL_CLK_VPU_AXI>, |
| 342 | <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, | 342 | <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, |
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 657da14cb4b5..c70bb27ac65a 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi | |||
| @@ -142,6 +142,7 @@ | |||
| 142 | scfg: scfg@1570000 { | 142 | scfg: scfg@1570000 { |
| 143 | compatible = "fsl,ls1021a-scfg", "syscon"; | 143 | compatible = "fsl,ls1021a-scfg", "syscon"; |
| 144 | reg = <0x0 0x1570000 0x0 0x10000>; | 144 | reg = <0x0 0x1570000 0x0 0x10000>; |
| 145 | big-endian; | ||
| 145 | }; | 146 | }; |
| 146 | 147 | ||
| 147 | clockgen: clocking@1ee1000 { | 148 | clockgen: clocking@1ee1000 { |
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 53f3ca064140..b550c41b46f1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts | |||
| @@ -700,11 +700,9 @@ | |||
| 700 | }; | 700 | }; |
| 701 | }; | 701 | }; |
| 702 | 702 | ||
| 703 | /* Ethernet is on some early development boards and qemu */ | ||
| 703 | ethernet@gpmc { | 704 | ethernet@gpmc { |
| 704 | compatible = "smsc,lan91c94"; | 705 | compatible = "smsc,lan91c94"; |
| 705 | |||
| 706 | status = "disabled"; | ||
| 707 | |||
| 708 | interrupt-parent = <&gpio2>; | 706 | interrupt-parent = <&gpio2>; |
| 709 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ | 707 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ |
| 710 | reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ | 708 | reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ |
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 3e067dd65d0c..6194d673e80b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi | |||
| @@ -155,6 +155,15 @@ | |||
| 155 | }; | 155 | }; |
| 156 | 156 | ||
| 157 | &pinctrl { | 157 | &pinctrl { |
| 158 | pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { | ||
| 159 | drive-strength = <8>; | ||
| 160 | }; | ||
| 161 | |||
| 162 | pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { | ||
| 163 | bias-pull-up; | ||
| 164 | drive-strength = <8>; | ||
| 165 | }; | ||
| 166 | |||
| 158 | backlight { | 167 | backlight { |
| 159 | bl_en: bl-en { | 168 | bl_en: bl-en { |
| 160 | rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; | 169 | rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; |
| @@ -173,6 +182,27 @@ | |||
| 173 | }; | 182 | }; |
| 174 | }; | 183 | }; |
| 175 | 184 | ||
| 185 | sdmmc { | ||
| 186 | /* | ||
| 187 | * Default drive strength isn't enough to achieve even | ||
| 188 | * high-speed mode on EVB board so bump up to 8ma. | ||
| 189 | */ | ||
| 190 | sdmmc_bus4: sdmmc-bus4 { | ||
| 191 | rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, | ||
| 192 | <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, | ||
| 193 | <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, | ||
| 194 | <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; | ||
| 195 | }; | ||
| 196 | |||
| 197 | sdmmc_clk: sdmmc-clk { | ||
| 198 | rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; | ||
| 199 | }; | ||
| 200 | |||
| 201 | sdmmc_cmd: sdmmc-cmd { | ||
| 202 | rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; | ||
| 203 | }; | ||
| 204 | }; | ||
| 205 | |||
| 176 | usb { | 206 | usb { |
| 177 | host_vbus_drv: host-vbus-drv { | 207 | host_vbus_drv: host-vbus-drv { |
| 178 | rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; | 208 | rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; |
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 49c10d33df30..77e03655aca3 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi | |||
| @@ -176,7 +176,7 @@ | |||
| 176 | "Headphone Jack", "HPOUTR", | 176 | "Headphone Jack", "HPOUTR", |
| 177 | "IN2L", "Line In Jack", | 177 | "IN2L", "Line In Jack", |
| 178 | "IN2R", "Line In Jack", | 178 | "IN2R", "Line In Jack", |
| 179 | "MICBIAS", "IN1L", | 179 | "Mic", "MICBIAS", |
| 180 | "IN1L", "Mic"; | 180 | "IN1L", "Mic"; |
| 181 | 181 | ||
| 182 | atmel,ssc-controller = <&ssc0>; | 182 | atmel,ssc-controller = <&ssc0>; |
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 1b0f30c2c4a5..b94995d1889f 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi | |||
| @@ -1008,7 +1008,7 @@ | |||
| 1008 | 1008 | ||
| 1009 | pit: timer@fc068630 { | 1009 | pit: timer@fc068630 { |
| 1010 | compatible = "atmel,at91sam9260-pit"; | 1010 | compatible = "atmel,at91sam9260-pit"; |
| 1011 | reg = <0xfc068630 0xf>; | 1011 | reg = <0xfc068630 0x10>; |
| 1012 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; | 1012 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1013 | clocks = <&h32ck>; | 1013 | clocks = <&h32ck>; |
| 1014 | }; | 1014 | }; |
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index a8c00ee7522a..3d0b8755caee 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts | |||
| @@ -25,11 +25,11 @@ | |||
| 25 | stmpe2401_1 { | 25 | stmpe2401_1 { |
| 26 | stmpe2401_1_nhk_mode: stmpe2401_1_nhk { | 26 | stmpe2401_1_nhk_mode: stmpe2401_1_nhk { |
| 27 | nhk_cfg1 { | 27 | nhk_cfg1 { |
| 28 | ste,pins = "GPIO76_B20"; // IRQ line | 28 | pins = "GPIO76_B20"; // IRQ line |
| 29 | ste,input = <0>; | 29 | ste,input = <0>; |
| 30 | }; | 30 | }; |
| 31 | nhk_cfg2 { | 31 | nhk_cfg2 { |
| 32 | ste,pins = "GPIO77_B8"; // reset line | 32 | pins = "GPIO77_B8"; // reset line |
| 33 | ste,output = <1>; | 33 | ste,output = <1>; |
| 34 | }; | 34 | }; |
| 35 | }; | 35 | }; |
| @@ -37,11 +37,11 @@ | |||
| 37 | stmpe2401_2 { | 37 | stmpe2401_2 { |
| 38 | stmpe2401_2_nhk_mode: stmpe2401_2_nhk { | 38 | stmpe2401_2_nhk_mode: stmpe2401_2_nhk { |
| 39 | nhk_cfg1 { | 39 | nhk_cfg1 { |
| 40 | ste,pins = "GPIO78_A8"; // IRQ line | 40 | pins = "GPIO78_A8"; // IRQ line |
| 41 | ste,input = <0>; | 41 | ste,input = <0>; |
| 42 | }; | 42 | }; |
| 43 | nhk_cfg2 { | 43 | nhk_cfg2 { |
| 44 | ste,pins = "GPIO79_C9"; // reset line | 44 | pins = "GPIO79_C9"; // reset line |
| 45 | ste,output = <1>; | 45 | ste,output = <1>; |
| 46 | }; | 46 | }; |
| 47 | }; | 47 | }; |
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 7b4099fcf817..d5c4669224b1 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi | |||
| @@ -17,14 +17,6 @@ | |||
| 17 | 17 | ||
| 18 | aliases { | 18 | aliases { |
| 19 | ethernet0 = &emac; | 19 | ethernet0 = &emac; |
| 20 | serial0 = &uart0; | ||
| 21 | serial1 = &uart1; | ||
| 22 | serial2 = &uart2; | ||
| 23 | serial3 = &uart3; | ||
| 24 | serial4 = &uart4; | ||
| 25 | serial5 = &uart5; | ||
| 26 | serial6 = &uart6; | ||
| 27 | serial7 = &uart7; | ||
| 28 | }; | 20 | }; |
| 29 | 21 | ||
| 30 | chosen { | 22 | chosen { |
| @@ -39,6 +31,14 @@ | |||
| 39 | <&ahb_gates 44>; | 31 | <&ahb_gates 44>; |
| 40 | status = "disabled"; | 32 | status = "disabled"; |
| 41 | }; | 33 | }; |
| 34 | |||
| 35 | framebuffer@1 { | ||
| 36 | compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; | ||
| 37 | allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; | ||
| 38 | clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, | ||
| 39 | <&ahb_gates 44>, <&ahb_gates 46>; | ||
| 40 | status = "disabled"; | ||
| 41 | }; | ||
| 42 | }; | 42 | }; |
| 43 | 43 | ||
| 44 | cpus { | 44 | cpus { |
| @@ -438,8 +438,8 @@ | |||
| 438 | reg-names = "phy_ctrl", "pmu1", "pmu2"; | 438 | reg-names = "phy_ctrl", "pmu1", "pmu2"; |
| 439 | clocks = <&usb_clk 8>; | 439 | clocks = <&usb_clk 8>; |
| 440 | clock-names = "usb_phy"; | 440 | clock-names = "usb_phy"; |
| 441 | resets = <&usb_clk 1>, <&usb_clk 2>; | 441 | resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; |
| 442 | reset-names = "usb1_reset", "usb2_reset"; | 442 | reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; |
| 443 | status = "disabled"; | 443 | status = "disabled"; |
| 444 | }; | 444 | }; |
| 445 | 445 | ||
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index fe3c559ca6a8..bfa742817690 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | |||
| @@ -55,6 +55,12 @@ | |||
| 55 | model = "Olimex A10s-Olinuxino Micro"; | 55 | model = "Olimex A10s-Olinuxino Micro"; |
| 56 | compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; | 56 | compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; |
| 57 | 57 | ||
| 58 | aliases { | ||
| 59 | serial0 = &uart0; | ||
| 60 | serial1 = &uart2; | ||
| 61 | serial2 = &uart3; | ||
| 62 | }; | ||
| 63 | |||
| 58 | soc@01c00000 { | 64 | soc@01c00000 { |
| 59 | emac: ethernet@01c0b000 { | 65 | emac: ethernet@01c0b000 { |
| 60 | pinctrl-names = "default"; | 66 | pinctrl-names = "default"; |
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 1b76667f3182..2e7d8263799d 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi | |||
| @@ -18,10 +18,6 @@ | |||
| 18 | 18 | ||
| 19 | aliases { | 19 | aliases { |
| 20 | ethernet0 = &emac; | 20 | ethernet0 = &emac; |
| 21 | serial0 = &uart0; | ||
| 22 | serial1 = &uart1; | ||
| 23 | serial2 = &uart2; | ||
| 24 | serial3 = &uart3; | ||
| 25 | }; | 21 | }; |
| 26 | 22 | ||
| 27 | chosen { | 23 | chosen { |
| @@ -390,8 +386,8 @@ | |||
| 390 | reg-names = "phy_ctrl", "pmu1"; | 386 | reg-names = "phy_ctrl", "pmu1"; |
| 391 | clocks = <&usb_clk 8>; | 387 | clocks = <&usb_clk 8>; |
| 392 | clock-names = "usb_phy"; | 388 | clock-names = "usb_phy"; |
| 393 | resets = <&usb_clk 1>; | 389 | resets = <&usb_clk 0>, <&usb_clk 1>; |
| 394 | reset-names = "usb1_reset"; | 390 | reset-names = "usb0_reset", "usb1_reset"; |
| 395 | status = "disabled"; | 391 | status = "disabled"; |
| 396 | }; | 392 | }; |
| 397 | 393 | ||
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index eeed1f236ee8..c7be3abd9fcc 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | |||
| @@ -53,6 +53,10 @@ | |||
| 53 | model = "HSG H702"; | 53 | model = "HSG H702"; |
| 54 | compatible = "hsg,h702", "allwinner,sun5i-a13"; | 54 | compatible = "hsg,h702", "allwinner,sun5i-a13"; |
| 55 | 55 | ||
| 56 | aliases { | ||
| 57 | serial0 = &uart1; | ||
| 58 | }; | ||
| 59 | |||
| 56 | soc@01c00000 { | 60 | soc@01c00000 { |
| 57 | mmc0: mmc@01c0f000 { | 61 | mmc0: mmc@01c0f000 { |
| 58 | pinctrl-names = "default"; | 62 | pinctrl-names = "default"; |
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 916ee8bb826f..3decefb3c37a 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | |||
| @@ -54,6 +54,10 @@ | |||
| 54 | model = "Olimex A13-Olinuxino Micro"; | 54 | model = "Olimex A13-Olinuxino Micro"; |
| 55 | compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; | 55 | compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; |
| 56 | 56 | ||
| 57 | aliases { | ||
| 58 | serial0 = &uart1; | ||
| 59 | }; | ||
| 60 | |||
| 57 | soc@01c00000 { | 61 | soc@01c00000 { |
| 58 | mmc0: mmc@01c0f000 { | 62 | mmc0: mmc@01c0f000 { |
| 59 | pinctrl-names = "default"; | 63 | pinctrl-names = "default"; |
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index e31d291d14cb..b421f7fa197b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts | |||
| @@ -55,6 +55,10 @@ | |||
| 55 | model = "Olimex A13-Olinuxino"; | 55 | model = "Olimex A13-Olinuxino"; |
| 56 | compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; | 56 | compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; |
| 57 | 57 | ||
| 58 | aliases { | ||
| 59 | serial0 = &uart1; | ||
| 60 | }; | ||
| 61 | |||
| 58 | soc@01c00000 { | 62 | soc@01c00000 { |
| 59 | mmc0: mmc@01c0f000 { | 63 | mmc0: mmc@01c0f000 { |
| 60 | pinctrl-names = "default"; | 64 | pinctrl-names = "default"; |
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c35217ea1f64..c556688f8b8b 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi | |||
| @@ -16,11 +16,6 @@ | |||
| 16 | / { | 16 | / { |
| 17 | interrupt-parent = <&intc>; | 17 | interrupt-parent = <&intc>; |
| 18 | 18 | ||
| 19 | aliases { | ||
| 20 | serial0 = &uart1; | ||
| 21 | serial1 = &uart3; | ||
| 22 | }; | ||
| 23 | |||
| 24 | cpus { | 19 | cpus { |
| 25 | #address-cells = <1>; | 20 | #address-cells = <1>; |
| 26 | #size-cells = <0>; | 21 | #size-cells = <0>; |
| @@ -349,8 +344,8 @@ | |||
| 349 | reg-names = "phy_ctrl", "pmu1"; | 344 | reg-names = "phy_ctrl", "pmu1"; |
| 350 | clocks = <&usb_clk 8>; | 345 | clocks = <&usb_clk 8>; |
| 351 | clock-names = "usb_phy"; | 346 | clock-names = "usb_phy"; |
| 352 | resets = <&usb_clk 1>; | 347 | resets = <&usb_clk 0>, <&usb_clk 1>; |
| 353 | reset-names = "usb1_reset"; | 348 | reset-names = "usb0_reset", "usb1_reset"; |
| 354 | status = "disabled"; | 349 | status = "disabled"; |
| 355 | }; | 350 | }; |
| 356 | 351 | ||
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f47156b6572b..1e7e7bcf8307 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi | |||
| @@ -53,12 +53,6 @@ | |||
| 53 | interrupt-parent = <&gic>; | 53 | interrupt-parent = <&gic>; |
| 54 | 54 | ||
| 55 | aliases { | 55 | aliases { |
| 56 | serial0 = &uart0; | ||
| 57 | serial1 = &uart1; | ||
| 58 | serial2 = &uart2; | ||
| 59 | serial3 = &uart3; | ||
| 60 | serial4 = &uart4; | ||
| 61 | serial5 = &uart5; | ||
| 62 | ethernet0 = &gmac; | 56 | ethernet0 = &gmac; |
| 63 | }; | 57 | }; |
| 64 | 58 | ||
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 1cf1214cc068..bd7b15add697 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts | |||
| @@ -55,6 +55,12 @@ | |||
| 55 | model = "LeMaker Banana Pi"; | 55 | model = "LeMaker Banana Pi"; |
| 56 | compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; | 56 | compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; |
| 57 | 57 | ||
| 58 | aliases { | ||
| 59 | serial0 = &uart0; | ||
| 60 | serial1 = &uart3; | ||
| 61 | serial2 = &uart7; | ||
| 62 | }; | ||
| 63 | |||
| 58 | soc@01c00000 { | 64 | soc@01c00000 { |
| 59 | spi0: spi@01c05000 { | 65 | spi0: spi@01c05000 { |
| 60 | pinctrl-names = "default"; | 66 | pinctrl-names = "default"; |
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 0e4bfa3b2b85..0bcefcbbb756 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts | |||
| @@ -19,6 +19,14 @@ | |||
| 19 | model = "Merrii A20 Hummingbird"; | 19 | model = "Merrii A20 Hummingbird"; |
| 20 | compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; | 20 | compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; |
| 21 | 21 | ||
| 22 | aliases { | ||
| 23 | serial0 = &uart0; | ||
| 24 | serial1 = &uart2; | ||
| 25 | serial2 = &uart3; | ||
| 26 | serial3 = &uart4; | ||
| 27 | serial4 = &uart5; | ||
| 28 | }; | ||
| 29 | |||
| 22 | soc@01c00000 { | 30 | soc@01c00000 { |
| 23 | mmc0: mmc@01c0f000 { | 31 | mmc0: mmc@01c0f000 { |
| 24 | pinctrl-names = "default"; | 32 | pinctrl-names = "default"; |
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 9d669cdf031d..66cc77707198 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | |||
| @@ -20,6 +20,9 @@ | |||
| 20 | compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; | 20 | compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; |
| 21 | 21 | ||
| 22 | aliases { | 22 | aliases { |
| 23 | serial0 = &uart0; | ||
| 24 | serial1 = &uart6; | ||
| 25 | serial2 = &uart7; | ||
| 23 | spi0 = &spi1; | 26 | spi0 = &spi1; |
| 24 | spi1 = &spi2; | 27 | spi1 = &spi2; |
| 25 | }; | 28 | }; |
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e21ce5992d56..89749ce34a84 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi | |||
| @@ -54,14 +54,6 @@ | |||
| 54 | 54 | ||
| 55 | aliases { | 55 | aliases { |
| 56 | ethernet0 = &gmac; | 56 | ethernet0 = &gmac; |
| 57 | serial0 = &uart0; | ||
| 58 | serial1 = &uart1; | ||
| 59 | serial2 = &uart2; | ||
| 60 | serial3 = &uart3; | ||
| 61 | serial4 = &uart4; | ||
| 62 | serial5 = &uart5; | ||
| 63 | serial6 = &uart6; | ||
| 64 | serial7 = &uart7; | ||
| 65 | }; | 57 | }; |
| 66 | 58 | ||
| 67 | chosen { | 59 | chosen { |
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 7f2117ce6985..32ad80804dbb 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | |||
| @@ -55,6 +55,10 @@ | |||
| 55 | model = "Ippo Q8H Dual Core Tablet (v5)"; | 55 | model = "Ippo Q8H Dual Core Tablet (v5)"; |
| 56 | compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; | 56 | compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; |
| 57 | 57 | ||
| 58 | aliases { | ||
| 59 | serial0 = &r_uart; | ||
| 60 | }; | ||
| 61 | |||
| 58 | chosen { | 62 | chosen { |
| 59 | bootargs = "earlyprintk console=ttyS0,115200"; | 63 | bootargs = "earlyprintk console=ttyS0,115200"; |
| 60 | }; | 64 | }; |
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 0746cd1024d7..86584fcf5e32 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi | |||
| @@ -52,15 +52,6 @@ | |||
| 52 | / { | 52 | / { |
| 53 | interrupt-parent = <&gic>; | 53 | interrupt-parent = <&gic>; |
| 54 | 54 | ||
| 55 | aliases { | ||
| 56 | serial0 = &uart0; | ||
| 57 | serial1 = &uart1; | ||
| 58 | serial2 = &uart2; | ||
| 59 | serial3 = &uart3; | ||
| 60 | serial4 = &uart4; | ||
| 61 | serial5 = &r_uart; | ||
| 62 | }; | ||
| 63 | |||
| 64 | cpus { | 55 | cpus { |
| 65 | #address-cells = <1>; | 56 | #address-cells = <1>; |
| 66 | #size-cells = <0>; | 57 | #size-cells = <0>; |
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 506948f582ee..11ec71072e81 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts | |||
| @@ -54,6 +54,11 @@ | |||
| 54 | model = "Merrii A80 Optimus Board"; | 54 | model = "Merrii A80 Optimus Board"; |
| 55 | compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; | 55 | compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; |
| 56 | 56 | ||
| 57 | aliases { | ||
| 58 | serial0 = &uart0; | ||
| 59 | serial1 = &uart4; | ||
| 60 | }; | ||
| 61 | |||
| 57 | chosen { | 62 | chosen { |
| 58 | bootargs = "earlyprintk console=ttyS0,115200"; | 63 | bootargs = "earlyprintk console=ttyS0,115200"; |
| 59 | }; | 64 | }; |
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 494714f67b57..9ef4438206a9 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi | |||
| @@ -52,16 +52,6 @@ | |||
| 52 | / { | 52 | / { |
| 53 | interrupt-parent = <&gic>; | 53 | interrupt-parent = <&gic>; |
| 54 | 54 | ||
| 55 | aliases { | ||
| 56 | serial0 = &uart0; | ||
| 57 | serial1 = &uart1; | ||
| 58 | serial2 = &uart2; | ||
| 59 | serial3 = &uart3; | ||
| 60 | serial4 = &uart4; | ||
| 61 | serial5 = &uart5; | ||
| 62 | serial6 = &r_uart; | ||
| 63 | }; | ||
| 64 | |||
| 65 | cpus { | 55 | cpus { |
| 66 | #address-cells = <1>; | 56 | #address-cells = <1>; |
| 67 | #size-cells = <0>; | 57 | #size-cells = <0>; |
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 5ef14de00a29..3d0c5d65c741 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig | |||
| @@ -84,7 +84,8 @@ CONFIG_DEBUG_GPIO=y | |||
| 84 | CONFIG_POWER_SUPPLY=y | 84 | CONFIG_POWER_SUPPLY=y |
| 85 | CONFIG_BATTERY_SBS=y | 85 | CONFIG_BATTERY_SBS=y |
| 86 | CONFIG_CHARGER_TPS65090=y | 86 | CONFIG_CHARGER_TPS65090=y |
| 87 | # CONFIG_HWMON is not set | 87 | CONFIG_HWMON=y |
| 88 | CONFIG_SENSORS_LM90=y | ||
| 88 | CONFIG_THERMAL=y | 89 | CONFIG_THERMAL=y |
| 89 | CONFIG_EXYNOS_THERMAL=y | 90 | CONFIG_EXYNOS_THERMAL=y |
| 90 | CONFIG_EXYNOS_THERMAL_CORE=y | 91 | CONFIG_EXYNOS_THERMAL_CORE=y |
| @@ -109,11 +110,26 @@ CONFIG_REGULATOR_S2MPA01=y | |||
| 109 | CONFIG_REGULATOR_S2MPS11=y | 110 | CONFIG_REGULATOR_S2MPS11=y |
| 110 | CONFIG_REGULATOR_S5M8767=y | 111 | CONFIG_REGULATOR_S5M8767=y |
| 111 | CONFIG_REGULATOR_TPS65090=y | 112 | CONFIG_REGULATOR_TPS65090=y |
| 113 | CONFIG_DRM=y | ||
| 114 | CONFIG_DRM_BRIDGE=y | ||
| 115 | CONFIG_DRM_PTN3460=y | ||
| 116 | CONFIG_DRM_PS8622=y | ||
| 117 | CONFIG_DRM_EXYNOS=y | ||
| 118 | CONFIG_DRM_EXYNOS_FIMD=y | ||
| 119 | CONFIG_DRM_EXYNOS_DP=y | ||
| 120 | CONFIG_DRM_PANEL=y | ||
| 121 | CONFIG_DRM_PANEL_SIMPLE=y | ||
| 112 | CONFIG_FB=y | 122 | CONFIG_FB=y |
| 113 | CONFIG_FB_MODE_HELPERS=y | 123 | CONFIG_FB_MODE_HELPERS=y |
| 114 | CONFIG_FB_SIMPLE=y | 124 | CONFIG_FB_SIMPLE=y |
| 115 | CONFIG_EXYNOS_VIDEO=y | 125 | CONFIG_EXYNOS_VIDEO=y |
| 116 | CONFIG_EXYNOS_MIPI_DSI=y | 126 | CONFIG_EXYNOS_MIPI_DSI=y |
| 127 | CONFIG_BACKLIGHT_LCD_SUPPORT=y | ||
| 128 | CONFIG_LCD_CLASS_DEVICE=y | ||
| 129 | CONFIG_LCD_PLATFORM=y | ||
| 130 | CONFIG_BACKLIGHT_CLASS_DEVICE=y | ||
| 131 | CONFIG_BACKLIGHT_GENERIC=y | ||
| 132 | CONFIG_BACKLIGHT_PWM=y | ||
| 117 | CONFIG_FRAMEBUFFER_CONSOLE=y | 133 | CONFIG_FRAMEBUFFER_CONSOLE=y |
| 118 | CONFIG_FONTS=y | 134 | CONFIG_FONTS=y |
| 119 | CONFIG_FONT_7x14=y | 135 | CONFIG_FONT_7x14=y |
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c2c3a852af9f..667d9d52aa01 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig | |||
| @@ -68,7 +68,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y | |||
| 68 | CONFIG_CPU_FREQ_GOV_POWERSAVE=y | 68 | CONFIG_CPU_FREQ_GOV_POWERSAVE=y |
| 69 | CONFIG_CPU_FREQ_GOV_USERSPACE=y | 69 | CONFIG_CPU_FREQ_GOV_USERSPACE=y |
| 70 | CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y | 70 | CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y |
| 71 | CONFIG_GENERIC_CPUFREQ_CPU0=y | 71 | CONFIG_CPUFREQ_DT=y |
| 72 | # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set | 72 | # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set |
| 73 | CONFIG_CPU_IDLE=y | 73 | CONFIG_CPU_IDLE=y |
| 74 | CONFIG_BINFMT_MISC=y | 74 | CONFIG_BINFMT_MISC=y |
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 8fb9ef5333f1..97f7367d32b8 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c | |||
| @@ -17,6 +17,7 @@ | |||
| 17 | #include <linux/of_platform.h> | 17 | #include <linux/of_platform.h> |
| 18 | #include <linux/phy.h> | 18 | #include <linux/phy.h> |
| 19 | #include <linux/clk-provider.h> | 19 | #include <linux/clk-provider.h> |
| 20 | #include <linux/phy.h> | ||
| 20 | 21 | ||
| 21 | #include <asm/setup.h> | 22 | #include <asm/setup.h> |
| 22 | #include <asm/irq.h> | 23 | #include <asm/irq.h> |
| @@ -26,8 +27,25 @@ | |||
| 26 | 27 | ||
| 27 | #include "generic.h" | 28 | #include "generic.h" |
| 28 | 29 | ||
| 30 | static int ksz8081_phy_fixup(struct phy_device *phy) | ||
| 31 | { | ||
| 32 | int value; | ||
| 33 | |||
| 34 | value = phy_read(phy, 0x16); | ||
| 35 | value &= ~0x20; | ||
| 36 | phy_write(phy, 0x16, value); | ||
| 37 | |||
| 38 | return 0; | ||
| 39 | } | ||
| 40 | |||
| 29 | static void __init sama5_dt_device_init(void) | 41 | static void __init sama5_dt_device_init(void) |
| 30 | { | 42 | { |
| 43 | if (of_machine_is_compatible("atmel,sama5d4ek") && | ||
| 44 | IS_ENABLED(CONFIG_PHYLIB)) { | ||
| 45 | phy_register_fixup_for_id("fc028000.etherne:00", | ||
| 46 | ksz8081_phy_fixup); | ||
| 47 | } | ||
| 48 | |||
| 31 | of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); | 49 | of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); |
| 32 | } | 50 | } |
| 33 | 51 | ||
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 5951660d1bd2..2daef619d053 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c | |||
| @@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) | |||
| 144 | post_div_table[1].div = 1; | 144 | post_div_table[1].div = 1; |
| 145 | post_div_table[2].div = 1; | 145 | post_div_table[2].div = 1; |
| 146 | video_div_table[1].div = 1; | 146 | video_div_table[1].div = 1; |
| 147 | video_div_table[2].div = 1; | 147 | video_div_table[3].div = 1; |
| 148 | } | 148 | } |
| 149 | 149 | ||
| 150 | clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); | 150 | clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 17354a11356f..5a3e5a159e70 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c | |||
| @@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) | |||
| 558 | clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); | 558 | clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); |
| 559 | clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); | 559 | clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); |
| 560 | 560 | ||
| 561 | clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]); | ||
| 562 | clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]); | ||
| 563 | |||
| 561 | /* Set initial power mode */ | 564 | /* Set initial power mode */ |
| 562 | imx6q_set_lpm(WAIT_CLOCKED); | 565 | imx6q_set_lpm(WAIT_CLOCKED); |
| 563 | } | 566 | } |
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 608079a1aba6..b61c049f92d6 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c | |||
| @@ -77,6 +77,24 @@ MACHINE_END | |||
| 77 | #endif | 77 | #endif |
| 78 | 78 | ||
| 79 | #ifdef CONFIG_ARCH_OMAP3 | 79 | #ifdef CONFIG_ARCH_OMAP3 |
| 80 | /* Some boards need board name for legacy userspace in /proc/cpuinfo */ | ||
| 81 | static const char *const n900_boards_compat[] __initconst = { | ||
| 82 | "nokia,omap3-n900", | ||
| 83 | NULL, | ||
| 84 | }; | ||
| 85 | |||
| 86 | DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") | ||
| 87 | .reserve = omap_reserve, | ||
| 88 | .map_io = omap3_map_io, | ||
| 89 | .init_early = omap3430_init_early, | ||
| 90 | .init_machine = omap_generic_init, | ||
| 91 | .init_late = omap3_init_late, | ||
| 92 | .init_time = omap3_sync32k_timer_init, | ||
| 93 | .dt_compat = n900_boards_compat, | ||
| 94 | .restart = omap3xxx_restart, | ||
| 95 | MACHINE_END | ||
| 96 | |||
| 97 | /* Generic omap3 boards, most boards can use these */ | ||
| 80 | static const char *const omap3_boards_compat[] __initconst = { | 98 | static const char *const omap3_boards_compat[] __initconst = { |
| 81 | "ti,omap3430", | 99 | "ti,omap3430", |
| 82 | "ti,omap3", | 100 | "ti,omap3", |
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 377eea849e7b..64e44d6d07c0 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h | |||
| @@ -211,6 +211,7 @@ extern struct device *omap2_get_iva_device(void); | |||
| 211 | extern struct device *omap2_get_l3_device(void); | 211 | extern struct device *omap2_get_l3_device(void); |
| 212 | extern struct device *omap4_get_dsp_device(void); | 212 | extern struct device *omap4_get_dsp_device(void); |
| 213 | 213 | ||
| 214 | unsigned int omap4_xlate_irq(unsigned int hwirq); | ||
| 214 | void omap_gic_of_init(void); | 215 | void omap_gic_of_init(void); |
| 215 | 216 | ||
| 216 | #ifdef CONFIG_CACHE_L2X0 | 217 | #ifdef CONFIG_CACHE_L2X0 |
| @@ -249,6 +250,7 @@ extern void omap4_cpu_die(unsigned int cpu); | |||
| 249 | extern struct smp_operations omap4_smp_ops; | 250 | extern struct smp_operations omap4_smp_ops; |
| 250 | 251 | ||
| 251 | extern void omap5_secondary_startup(void); | 252 | extern void omap5_secondary_startup(void); |
| 253 | extern void omap5_secondary_hyp_startup(void); | ||
| 252 | #endif | 254 | #endif |
| 253 | 255 | ||
| 254 | #if defined(CONFIG_SMP) && defined(CONFIG_PM) | 256 | #if defined(CONFIG_SMP) && defined(CONFIG_PM) |
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a3c013345c45..a80ac2d70bb1 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h | |||
| @@ -286,6 +286,10 @@ | |||
| 286 | #define OMAP5XXX_CONTROL_STATUS 0x134 | 286 | #define OMAP5XXX_CONTROL_STATUS 0x134 |
| 287 | #define OMAP5_DEVICETYPE_MASK (0x7 << 6) | 287 | #define OMAP5_DEVICETYPE_MASK (0x7 << 6) |
| 288 | 288 | ||
| 289 | /* DRA7XX CONTROL CORE BOOTSTRAP */ | ||
| 290 | #define DRA7_CTRL_CORE_BOOTSTRAP 0x6c4 | ||
| 291 | #define DRA7_SPEEDSELECT_MASK (0x3 << 8) | ||
| 292 | |||
| 289 | /* | 293 | /* |
| 290 | * REVISIT: This list of registers is not comprehensive - there are more | 294 | * REVISIT: This list of registers is not comprehensive - there are more |
| 291 | * that should be added. | 295 | * that should be added. |
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4993d4bfe9b2..6d1dffca6c7b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S | |||
| @@ -22,6 +22,7 @@ | |||
| 22 | 22 | ||
| 23 | /* Physical address needed since MMU not enabled yet on secondary core */ | 23 | /* Physical address needed since MMU not enabled yet on secondary core */ |
| 24 | #define AUX_CORE_BOOT0_PA 0x48281800 | 24 | #define AUX_CORE_BOOT0_PA 0x48281800 |
| 25 | #define API_HYP_ENTRY 0x102 | ||
| 25 | 26 | ||
| 26 | /* | 27 | /* |
| 27 | * OMAP5 specific entry point for secondary CPU to jump from ROM | 28 | * OMAP5 specific entry point for secondary CPU to jump from ROM |
| @@ -41,6 +42,26 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 | |||
| 41 | b secondary_startup | 42 | b secondary_startup |
| 42 | ENDPROC(omap5_secondary_startup) | 43 | ENDPROC(omap5_secondary_startup) |
| 43 | /* | 44 | /* |
| 45 | * Same as omap5_secondary_startup except we call into the ROM to | ||
| 46 | * enable HYP mode first. This is called instead of | ||
| 47 | * omap5_secondary_startup if the primary CPU was put into HYP mode by | ||
| 48 | * the boot loader. | ||
| 49 | */ | ||
| 50 | ENTRY(omap5_secondary_hyp_startup) | ||
| 51 | wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 | ||
| 52 | ldr r0, [r2] | ||
| 53 | mov r0, r0, lsr #5 | ||
| 54 | mrc p15, 0, r4, c0, c0, 5 | ||
| 55 | and r4, r4, #0x0f | ||
| 56 | cmp r0, r4 | ||
| 57 | bne wait_2 | ||
| 58 | ldr r12, =API_HYP_ENTRY | ||
| 59 | adr r0, hyp_boot | ||
| 60 | smc #0 | ||
| 61 | hyp_boot: | ||
| 62 | b secondary_startup | ||
| 63 | ENDPROC(omap5_secondary_hyp_startup) | ||
| 64 | /* | ||
| 44 | * OMAP4 specific entry point for secondary CPU to jump from ROM | 65 | * OMAP4 specific entry point for secondary CPU to jump from ROM |
| 45 | * code. This routine also provides a holding flag into which | 66 | * code. This routine also provides a holding flag into which |
| 46 | * secondary core is held until we're ready for it to initialise. | 67 | * secondary core is held until we're ready for it to initialise. |
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 256e84ef0f67..5305ec7341ec 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c | |||
| @@ -22,6 +22,7 @@ | |||
| 22 | #include <linux/irqchip/arm-gic.h> | 22 | #include <linux/irqchip/arm-gic.h> |
| 23 | 23 | ||
| 24 | #include <asm/smp_scu.h> | 24 | #include <asm/smp_scu.h> |
| 25 | #include <asm/virt.h> | ||
| 25 | 26 | ||
| 26 | #include "omap-secure.h" | 27 | #include "omap-secure.h" |
| 27 | #include "omap-wakeupgen.h" | 28 | #include "omap-wakeupgen.h" |
| @@ -227,8 +228,16 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) | |||
| 227 | if (omap_secure_apis_support()) | 228 | if (omap_secure_apis_support()) |
| 228 | omap_auxcoreboot_addr(virt_to_phys(startup_addr)); | 229 | omap_auxcoreboot_addr(virt_to_phys(startup_addr)); |
| 229 | else | 230 | else |
| 230 | writel_relaxed(virt_to_phys(omap5_secondary_startup), | 231 | /* |
| 231 | base + OMAP_AUX_CORE_BOOT_1); | 232 | * If the boot CPU is in HYP mode then start secondary |
| 233 | * CPU in HYP mode as well. | ||
| 234 | */ | ||
| 235 | if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) | ||
| 236 | writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup), | ||
| 237 | base + OMAP_AUX_CORE_BOOT_1); | ||
| 238 | else | ||
| 239 | writel_relaxed(virt_to_phys(omap5_secondary_startup), | ||
| 240 | base + OMAP_AUX_CORE_BOOT_1); | ||
| 232 | 241 | ||
| 233 | } | 242 | } |
| 234 | 243 | ||
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index b7cb44abe49b..cc30e49a4cc2 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c | |||
| @@ -256,6 +256,38 @@ static int __init omap4_sar_ram_init(void) | |||
| 256 | } | 256 | } |
| 257 | omap_early_initcall(omap4_sar_ram_init); | 257 | omap_early_initcall(omap4_sar_ram_init); |
| 258 | 258 | ||
| 259 | static struct of_device_id gic_match[] = { | ||
| 260 | { .compatible = "arm,cortex-a9-gic", }, | ||
| 261 | { .compatible = "arm,cortex-a15-gic", }, | ||
| 262 | { }, | ||
| 263 | }; | ||
| 264 | |||
| 265 | static struct device_node *gic_node; | ||
| 266 | |||
| 267 | unsigned int omap4_xlate_irq(unsigned int hwirq) | ||
| 268 | { | ||
| 269 | struct of_phandle_args irq_data; | ||
| 270 | unsigned int irq; | ||
| 271 | |||
| 272 | if (!gic_node) | ||
| 273 | gic_node = of_find_matching_node(NULL, gic_match); | ||
| 274 | |||
| 275 | if (WARN_ON(!gic_node)) | ||
| 276 | return hwirq; | ||
| 277 | |||
| 278 | irq_data.np = gic_node; | ||
| 279 | irq_data.args_count = 3; | ||
| 280 | irq_data.args[0] = 0; | ||
| 281 | irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START; | ||
| 282 | irq_data.args[2] = IRQ_TYPE_LEVEL_HIGH; | ||
| 283 | |||
| 284 | irq = irq_create_of_mapping(&irq_data); | ||
| 285 | if (WARN_ON(!irq)) | ||
| 286 | irq = hwirq; | ||
| 287 | |||
| 288 | return irq; | ||
| 289 | } | ||
| 290 | |||
| 259 | void __init omap_gic_of_init(void) | 291 | void __init omap_gic_of_init(void) |
| 260 | { | 292 | { |
| 261 | struct device_node *np; | 293 | struct device_node *np; |
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index cbb908dc5cf0..9025ffffd2dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c | |||
| @@ -3534,9 +3534,15 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) | |||
| 3534 | 3534 | ||
| 3535 | mpu_irqs_cnt = _count_mpu_irqs(oh); | 3535 | mpu_irqs_cnt = _count_mpu_irqs(oh); |
| 3536 | for (i = 0; i < mpu_irqs_cnt; i++) { | 3536 | for (i = 0; i < mpu_irqs_cnt; i++) { |
| 3537 | unsigned int irq; | ||
| 3538 | |||
| 3539 | if (oh->xlate_irq) | ||
| 3540 | irq = oh->xlate_irq((oh->mpu_irqs + i)->irq); | ||
| 3541 | else | ||
| 3542 | irq = (oh->mpu_irqs + i)->irq; | ||
| 3537 | (res + r)->name = (oh->mpu_irqs + i)->name; | 3543 | (res + r)->name = (oh->mpu_irqs + i)->name; |
| 3538 | (res + r)->start = (oh->mpu_irqs + i)->irq; | 3544 | (res + r)->start = irq; |
| 3539 | (res + r)->end = (oh->mpu_irqs + i)->irq; | 3545 | (res + r)->end = irq; |
| 3540 | (res + r)->flags = IORESOURCE_IRQ; | 3546 | (res + r)->flags = IORESOURCE_IRQ; |
| 3541 | r++; | 3547 | r++; |
| 3542 | } | 3548 | } |
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 35ca6efbec31..5b42fafcaf55 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h | |||
| @@ -676,6 +676,7 @@ struct omap_hwmod { | |||
| 676 | spinlock_t _lock; | 676 | spinlock_t _lock; |
| 677 | struct list_head node; | 677 | struct list_head node; |
| 678 | struct omap_hwmod_ocp_if *_mpu_port; | 678 | struct omap_hwmod_ocp_if *_mpu_port; |
| 679 | unsigned int (*xlate_irq)(unsigned int); | ||
| 679 | u16 flags; | 680 | u16 flags; |
| 680 | u8 mpu_rt_idx; | 681 | u8 mpu_rt_idx; |
| 681 | u8 response_lat; | 682 | u8 response_lat; |
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c314b3c31117..f5e68a782025 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c | |||
| @@ -479,6 +479,7 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = { | |||
| 479 | .class = &omap44xx_dma_hwmod_class, | 479 | .class = &omap44xx_dma_hwmod_class, |
| 480 | .clkdm_name = "l3_dma_clkdm", | 480 | .clkdm_name = "l3_dma_clkdm", |
| 481 | .mpu_irqs = omap44xx_dma_system_irqs, | 481 | .mpu_irqs = omap44xx_dma_system_irqs, |
| 482 | .xlate_irq = omap4_xlate_irq, | ||
| 482 | .main_clk = "l3_div_ck", | 483 | .main_clk = "l3_div_ck", |
| 483 | .prcm = { | 484 | .prcm = { |
| 484 | .omap4 = { | 485 | .omap4 = { |
| @@ -640,6 +641,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { | |||
| 640 | .class = &omap44xx_dispc_hwmod_class, | 641 | .class = &omap44xx_dispc_hwmod_class, |
| 641 | .clkdm_name = "l3_dss_clkdm", | 642 | .clkdm_name = "l3_dss_clkdm", |
| 642 | .mpu_irqs = omap44xx_dss_dispc_irqs, | 643 | .mpu_irqs = omap44xx_dss_dispc_irqs, |
| 644 | .xlate_irq = omap4_xlate_irq, | ||
| 643 | .sdma_reqs = omap44xx_dss_dispc_sdma_reqs, | 645 | .sdma_reqs = omap44xx_dss_dispc_sdma_reqs, |
| 644 | .main_clk = "dss_dss_clk", | 646 | .main_clk = "dss_dss_clk", |
| 645 | .prcm = { | 647 | .prcm = { |
| @@ -693,6 +695,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { | |||
| 693 | .class = &omap44xx_dsi_hwmod_class, | 695 | .class = &omap44xx_dsi_hwmod_class, |
| 694 | .clkdm_name = "l3_dss_clkdm", | 696 | .clkdm_name = "l3_dss_clkdm", |
| 695 | .mpu_irqs = omap44xx_dss_dsi1_irqs, | 697 | .mpu_irqs = omap44xx_dss_dsi1_irqs, |
| 698 | .xlate_irq = omap4_xlate_irq, | ||
| 696 | .sdma_reqs = omap44xx_dss_dsi1_sdma_reqs, | 699 | .sdma_reqs = omap44xx_dss_dsi1_sdma_reqs, |
| 697 | .main_clk = "dss_dss_clk", | 700 | .main_clk = "dss_dss_clk", |
| 698 | .prcm = { | 701 | .prcm = { |
| @@ -726,6 +729,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { | |||
| 726 | .class = &omap44xx_dsi_hwmod_class, | 729 | .class = &omap44xx_dsi_hwmod_class, |
| 727 | .clkdm_name = "l3_dss_clkdm", | 730 | .clkdm_name = "l3_dss_clkdm", |
| 728 | .mpu_irqs = omap44xx_dss_dsi2_irqs, | 731 | .mpu_irqs = omap44xx_dss_dsi2_irqs, |
| 732 | .xlate_irq = omap4_xlate_irq, | ||
| 729 | .sdma_reqs = omap44xx_dss_dsi2_sdma_reqs, | 733 | .sdma_reqs = omap44xx_dss_dsi2_sdma_reqs, |
| 730 | .main_clk = "dss_dss_clk", | 734 | .main_clk = "dss_dss_clk", |
| 731 | .prcm = { | 735 | .prcm = { |
| @@ -784,6 +788,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { | |||
| 784 | */ | 788 | */ |
| 785 | .flags = HWMOD_SWSUP_SIDLE, | 789 | .flags = HWMOD_SWSUP_SIDLE, |
| 786 | .mpu_irqs = omap44xx_dss_hdmi_irqs, | 790 | .mpu_irqs = omap44xx_dss_hdmi_irqs, |
| 791 | .xlate_irq = omap4_xlate_irq, | ||
| 787 | .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, | 792 | .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, |
| 788 | .main_clk = "dss_48mhz_clk", | 793 | .main_clk = "dss_48mhz_clk", |
| 789 | .prcm = { | 794 | .prcm = { |
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 3e9523084b2a..7c3fac035e93 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c | |||
| @@ -288,6 +288,7 @@ static struct omap_hwmod omap54xx_dma_system_hwmod = { | |||
| 288 | .class = &omap54xx_dma_hwmod_class, | 288 | .class = &omap54xx_dma_hwmod_class, |
| 289 | .clkdm_name = "dma_clkdm", | 289 | .clkdm_name = "dma_clkdm", |
| 290 | .mpu_irqs = omap54xx_dma_system_irqs, | 290 | .mpu_irqs = omap54xx_dma_system_irqs, |
| 291 | .xlate_irq = omap4_xlate_irq, | ||
| 291 | .main_clk = "l3_iclk_div", | 292 | .main_clk = "l3_iclk_div", |
| 292 | .prcm = { | 293 | .prcm = { |
| 293 | .omap4 = { | 294 | .omap4 = { |
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index a8e4b582c527..6163d66102a3 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h | |||
| @@ -498,6 +498,7 @@ struct omap_prcm_irq_setup { | |||
| 498 | u8 nr_irqs; | 498 | u8 nr_irqs; |
| 499 | const struct omap_prcm_irq *irqs; | 499 | const struct omap_prcm_irq *irqs; |
| 500 | int irq; | 500 | int irq; |
| 501 | unsigned int (*xlate_irq)(unsigned int); | ||
| 501 | void (*read_pending_irqs)(unsigned long *events); | 502 | void (*read_pending_irqs)(unsigned long *events); |
| 502 | void (*ocp_barrier)(void); | 503 | void (*ocp_barrier)(void); |
| 503 | void (*save_and_clear_irqen)(u32 *saved_mask); | 504 | void (*save_and_clear_irqen)(u32 *saved_mask); |
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index cc170fb81ff7..408c64efb807 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c | |||
| @@ -49,6 +49,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { | |||
| 49 | .irqs = omap4_prcm_irqs, | 49 | .irqs = omap4_prcm_irqs, |
| 50 | .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), | 50 | .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), |
| 51 | .irq = 11 + OMAP44XX_IRQ_GIC_START, | 51 | .irq = 11 + OMAP44XX_IRQ_GIC_START, |
| 52 | .xlate_irq = omap4_xlate_irq, | ||
| 52 | .read_pending_irqs = &omap44xx_prm_read_pending_irqs, | 53 | .read_pending_irqs = &omap44xx_prm_read_pending_irqs, |
| 53 | .ocp_barrier = &omap44xx_prm_ocp_barrier, | 54 | .ocp_barrier = &omap44xx_prm_ocp_barrier, |
| 54 | .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, | 55 | .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, |
| @@ -751,8 +752,10 @@ static int omap44xx_prm_late_init(void) | |||
| 751 | } | 752 | } |
| 752 | 753 | ||
| 753 | /* Once OMAP4 DT is filled as well */ | 754 | /* Once OMAP4 DT is filled as well */ |
| 754 | if (irq_num >= 0) | 755 | if (irq_num >= 0) { |
| 755 | omap4_prcm_irq_setup.irq = irq_num; | 756 | omap4_prcm_irq_setup.irq = irq_num; |
| 757 | omap4_prcm_irq_setup.xlate_irq = NULL; | ||
| 758 | } | ||
| 756 | } | 759 | } |
| 757 | 760 | ||
| 758 | omap44xx_prm_enable_io_wakeup(); | 761 | omap44xx_prm_enable_io_wakeup(); |
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 779940cb6e56..dea2833ca627 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c | |||
| @@ -187,6 +187,7 @@ int omap_prcm_event_to_irq(const char *name) | |||
| 187 | */ | 187 | */ |
| 188 | void omap_prcm_irq_cleanup(void) | 188 | void omap_prcm_irq_cleanup(void) |
| 189 | { | 189 | { |
| 190 | unsigned int irq; | ||
| 190 | int i; | 191 | int i; |
| 191 | 192 | ||
| 192 | if (!prcm_irq_setup) { | 193 | if (!prcm_irq_setup) { |
| @@ -211,7 +212,11 @@ void omap_prcm_irq_cleanup(void) | |||
| 211 | kfree(prcm_irq_setup->priority_mask); | 212 | kfree(prcm_irq_setup->priority_mask); |
| 212 | prcm_irq_setup->priority_mask = NULL; | 213 | prcm_irq_setup->priority_mask = NULL; |
| 213 | 214 | ||
| 214 | irq_set_chained_handler(prcm_irq_setup->irq, NULL); | 215 | if (prcm_irq_setup->xlate_irq) |
| 216 | irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq); | ||
| 217 | else | ||
| 218 | irq = prcm_irq_setup->irq; | ||
| 219 | irq_set_chained_handler(irq, NULL); | ||
| 215 | 220 | ||
| 216 | if (prcm_irq_setup->base_irq > 0) | 221 | if (prcm_irq_setup->base_irq > 0) |
| 217 | irq_free_descs(prcm_irq_setup->base_irq, | 222 | irq_free_descs(prcm_irq_setup->base_irq, |
| @@ -259,6 +264,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) | |||
| 259 | int offset, i; | 264 | int offset, i; |
| 260 | struct irq_chip_generic *gc; | 265 | struct irq_chip_generic *gc; |
| 261 | struct irq_chip_type *ct; | 266 | struct irq_chip_type *ct; |
| 267 | unsigned int irq; | ||
| 262 | 268 | ||
| 263 | if (!irq_setup) | 269 | if (!irq_setup) |
| 264 | return -EINVAL; | 270 | return -EINVAL; |
| @@ -298,7 +304,11 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) | |||
| 298 | 1 << (offset & 0x1f); | 304 | 1 << (offset & 0x1f); |
| 299 | } | 305 | } |
| 300 | 306 | ||
| 301 | irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler); | 307 | if (irq_setup->xlate_irq) |
| 308 | irq = irq_setup->xlate_irq(irq_setup->irq); | ||
| 309 | else | ||
| 310 | irq = irq_setup->irq; | ||
| 311 | irq_set_chained_handler(irq, omap_prcm_irq_handler); | ||
| 302 | 312 | ||
| 303 | irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32, | 313 | irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32, |
| 304 | 0); | 314 | 0); |
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 4f61148ec168..7d45c84c69ba 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c | |||
| @@ -54,6 +54,7 @@ | |||
| 54 | 54 | ||
| 55 | #include "soc.h" | 55 | #include "soc.h" |
| 56 | #include "common.h" | 56 | #include "common.h" |
| 57 | #include "control.h" | ||
| 57 | #include "powerdomain.h" | 58 | #include "powerdomain.h" |
| 58 | #include "omap-secure.h" | 59 | #include "omap-secure.h" |
| 59 | 60 | ||
| @@ -496,7 +497,8 @@ static void __init realtime_counter_init(void) | |||
| 496 | void __iomem *base; | 497 | void __iomem *base; |
| 497 | static struct clk *sys_clk; | 498 | static struct clk *sys_clk; |
| 498 | unsigned long rate; | 499 | unsigned long rate; |
| 499 | unsigned int reg, num, den; | 500 | unsigned int reg; |
| 501 | unsigned long long num, den; | ||
| 500 | 502 | ||
| 501 | base = ioremap(REALTIME_COUNTER_BASE, SZ_32); | 503 | base = ioremap(REALTIME_COUNTER_BASE, SZ_32); |
| 502 | if (!base) { | 504 | if (!base) { |
| @@ -511,13 +513,42 @@ static void __init realtime_counter_init(void) | |||
| 511 | } | 513 | } |
| 512 | 514 | ||
| 513 | rate = clk_get_rate(sys_clk); | 515 | rate = clk_get_rate(sys_clk); |
| 516 | |||
| 517 | if (soc_is_dra7xx()) { | ||
| 518 | /* | ||
| 519 | * Errata i856 says the 32.768KHz crystal does not start at | ||
| 520 | * power on, so the CPU falls back to an emulated 32KHz clock | ||
| 521 | * based on sysclk / 610 instead. This causes the master counter | ||
| 522 | * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2 | ||
| 523 | * (OR sysclk * 75 / 244) | ||
| 524 | * | ||
| 525 | * This affects at least the DRA7/AM572x 1.0, 1.1 revisions. | ||
| 526 | * Of course any board built without a populated 32.768KHz | ||
| 527 | * crystal would also need this fix even if the CPU is fixed | ||
| 528 | * later. | ||
| 529 | * | ||
| 530 | * Either case can be detected by using the two speedselect bits | ||
| 531 | * If they are not 0, then the 32.768KHz clock driving the | ||
| 532 | * coarse counter that corrects the fine counter every time it | ||
| 533 | * ticks is actually rate/610 rather than 32.768KHz and we | ||
| 534 | * should compensate to avoid the 570ppm (at 20MHz, much worse | ||
| 535 | * at other rates) too fast system time. | ||
| 536 | */ | ||
| 537 | reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP); | ||
| 538 | if (reg & DRA7_SPEEDSELECT_MASK) { | ||
| 539 | num = 75; | ||
| 540 | den = 244; | ||
| 541 | goto sysclk1_based; | ||
| 542 | } | ||
| 543 | } | ||
| 544 | |||
| 514 | /* Numerator/denumerator values refer TRM Realtime Counter section */ | 545 | /* Numerator/denumerator values refer TRM Realtime Counter section */ |
| 515 | switch (rate) { | 546 | switch (rate) { |
| 516 | case 1200000: | 547 | case 12000000: |
| 517 | num = 64; | 548 | num = 64; |
| 518 | den = 125; | 549 | den = 125; |
| 519 | break; | 550 | break; |
| 520 | case 1300000: | 551 | case 13000000: |
| 521 | num = 768; | 552 | num = 768; |
| 522 | den = 1625; | 553 | den = 1625; |
| 523 | break; | 554 | break; |
| @@ -529,11 +560,11 @@ static void __init realtime_counter_init(void) | |||
| 529 | num = 192; | 560 | num = 192; |
| 530 | den = 625; | 561 | den = 625; |
| 531 | break; | 562 | break; |
| 532 | case 2600000: | 563 | case 26000000: |
| 533 | num = 384; | 564 | num = 384; |
| 534 | den = 1625; | 565 | den = 1625; |
| 535 | break; | 566 | break; |
| 536 | case 2700000: | 567 | case 27000000: |
| 537 | num = 256; | 568 | num = 256; |
| 538 | den = 1125; | 569 | den = 1125; |
| 539 | break; | 570 | break; |
| @@ -545,6 +576,7 @@ static void __init realtime_counter_init(void) | |||
| 545 | break; | 576 | break; |
| 546 | } | 577 | } |
| 547 | 578 | ||
| 579 | sysclk1_based: | ||
| 548 | /* Program numerator and denumerator registers */ | 580 | /* Program numerator and denumerator registers */ |
| 549 | reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & | 581 | reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & |
| 550 | NUMERATOR_DENUMERATOR_MASK; | 582 | NUMERATOR_DENUMERATOR_MASK; |
| @@ -556,7 +588,7 @@ static void __init realtime_counter_init(void) | |||
| 556 | reg |= den; | 588 | reg |= den; |
| 557 | writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); | 589 | writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); |
| 558 | 590 | ||
| 559 | arch_timer_freq = (rate / den) * num; | 591 | arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den); |
| 560 | set_cntfreq(); | 592 | set_cntfreq(); |
| 561 | 593 | ||
| 562 | iounmap(base); | 594 | iounmap(base); |
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4457e731f7a4..292eca0e78ed 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c | |||
| @@ -66,19 +66,24 @@ void __init omap_pmic_init(int bus, u32 clkrate, | |||
| 66 | omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); | 66 | omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); |
| 67 | } | 67 | } |
| 68 | 68 | ||
| 69 | #ifdef CONFIG_ARCH_OMAP4 | ||
| 69 | void __init omap4_pmic_init(const char *pmic_type, | 70 | void __init omap4_pmic_init(const char *pmic_type, |
| 70 | struct twl4030_platform_data *pmic_data, | 71 | struct twl4030_platform_data *pmic_data, |
| 71 | struct i2c_board_info *devices, int nr_devices) | 72 | struct i2c_board_info *devices, int nr_devices) |
| 72 | { | 73 | { |
| 73 | /* PMIC part*/ | 74 | /* PMIC part*/ |
| 75 | unsigned int irq; | ||
| 76 | |||
| 74 | omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); | 77 | omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); |
| 75 | omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); | 78 | omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); |
| 76 | omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); | 79 | irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START); |
| 80 | omap_pmic_init(1, 400, pmic_type, irq, pmic_data); | ||
| 77 | 81 | ||
| 78 | /* Register additional devices on i2c1 bus if needed */ | 82 | /* Register additional devices on i2c1 bus if needed */ |
| 79 | if (devices) | 83 | if (devices) |
| 80 | i2c_register_board_info(1, devices, nr_devices); | 84 | i2c_register_board_info(1, devices, nr_devices); |
| 81 | } | 85 | } |
| 86 | #endif | ||
| 82 | 87 | ||
| 83 | void __init omap_pmic_late_init(void) | 88 | void __init omap_pmic_late_init(void) |
| 84 | { | 89 | { |
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d226b71d21d5..a611f4852582 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c | |||
| @@ -19,11 +19,37 @@ | |||
| 19 | #include <linux/init.h> | 19 | #include <linux/init.h> |
| 20 | #include <linux/of_platform.h> | 20 | #include <linux/of_platform.h> |
| 21 | #include <linux/irqchip.h> | 21 | #include <linux/irqchip.h> |
| 22 | #include <linux/clk-provider.h> | ||
| 23 | #include <linux/clocksource.h> | ||
| 24 | #include <linux/mfd/syscon.h> | ||
| 25 | #include <linux/regmap.h> | ||
| 22 | #include <asm/mach/arch.h> | 26 | #include <asm/mach/arch.h> |
| 23 | #include <asm/mach/map.h> | 27 | #include <asm/mach/map.h> |
| 24 | #include <asm/hardware/cache-l2x0.h> | 28 | #include <asm/hardware/cache-l2x0.h> |
| 25 | #include "core.h" | 29 | #include "core.h" |
| 26 | 30 | ||
| 31 | #define RK3288_GRF_SOC_CON0 0x244 | ||
| 32 | |||
| 33 | static void __init rockchip_timer_init(void) | ||
| 34 | { | ||
| 35 | if (of_machine_is_compatible("rockchip,rk3288")) { | ||
| 36 | struct regmap *grf; | ||
| 37 | |||
| 38 | /* | ||
| 39 | * Disable auto jtag/sdmmc switching that causes issues | ||
| 40 | * with the mmc controllers making them unreliable | ||
| 41 | */ | ||
| 42 | grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf"); | ||
| 43 | if (!IS_ERR(grf)) | ||
| 44 | regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); | ||
| 45 | else | ||
| 46 | pr_err("rockchip: could not get grf syscon\n"); | ||
| 47 | } | ||
| 48 | |||
| 49 | of_clk_init(NULL); | ||
| 50 | clocksource_of_init(); | ||
| 51 | } | ||
| 52 | |||
| 27 | static void __init rockchip_dt_init(void) | 53 | static void __init rockchip_dt_init(void) |
| 28 | { | 54 | { |
| 29 | of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); | 55 | of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); |
| @@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = { | |||
| 42 | DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") | 68 | DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") |
| 43 | .l2c_aux_val = 0, | 69 | .l2c_aux_val = 0, |
| 44 | .l2c_aux_mask = ~0, | 70 | .l2c_aux_mask = ~0, |
| 71 | .init_time = rockchip_timer_init, | ||
| 45 | .dt_compat = rockchip_board_dt_compat, | 72 | .dt_compat = rockchip_board_dt_compat, |
| 46 | .init_machine = rockchip_dt_init, | 73 | .init_machine = rockchip_dt_init, |
| 47 | MACHINE_END | 74 | MACHINE_END |
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 79ad93dfdae4..d191cf419731 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c | |||
| @@ -800,7 +800,14 @@ void __init r8a7740_init_irq_of(void) | |||
| 800 | void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); | 800 | void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); |
| 801 | void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); | 801 | void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); |
| 802 | 802 | ||
| 803 | #ifdef CONFIG_ARCH_SHMOBILE_LEGACY | ||
| 804 | void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); | ||
| 805 | void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); | ||
| 806 | |||
| 807 | gic_init(0, 29, gic_dist_base, gic_cpu_base); | ||
| 808 | #else | ||
| 803 | irqchip_init(); | 809 | irqchip_init(); |
| 810 | #endif | ||
| 804 | 811 | ||
| 805 | /* route signals to GIC */ | 812 | /* route signals to GIC */ |
| 806 | iowrite32(0x0, pfc_inta_ctrl); | 813 | iowrite32(0x0, pfc_inta_ctrl); |
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 170bd146ba17..cef8895a9b82 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c | |||
| @@ -576,11 +576,18 @@ void __init r8a7778_init_irq_extpin(int irlm) | |||
| 576 | void __init r8a7778_init_irq_dt(void) | 576 | void __init r8a7778_init_irq_dt(void) |
| 577 | { | 577 | { |
| 578 | void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); | 578 | void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); |
| 579 | #ifdef CONFIG_ARCH_SHMOBILE_LEGACY | ||
| 580 | void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000); | ||
| 581 | void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000); | ||
| 582 | #endif | ||
| 579 | 583 | ||
| 580 | BUG_ON(!base); | 584 | BUG_ON(!base); |
| 581 | 585 | ||
| 586 | #ifdef CONFIG_ARCH_SHMOBILE_LEGACY | ||
| 587 | gic_init(0, 29, gic_dist_base, gic_cpu_base); | ||
| 588 | #else | ||
| 582 | irqchip_init(); | 589 | irqchip_init(); |
| 583 | 590 | #endif | |
| 584 | /* route all interrupts to ARM */ | 591 | /* route all interrupts to ARM */ |
| 585 | __raw_writel(0x73ffffff, base + INT2NTSR0); | 592 | __raw_writel(0x73ffffff, base + INT2NTSR0); |
| 586 | __raw_writel(0xffffffff, base + INT2NTSR1); | 593 | __raw_writel(0xffffffff, base + INT2NTSR1); |
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 6156d172cf31..27dceaf9e688 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c | |||
| @@ -720,10 +720,17 @@ static int r8a7779_set_wake(struct irq_data *data, unsigned int on) | |||
| 720 | 720 | ||
| 721 | void __init r8a7779_init_irq_dt(void) | 721 | void __init r8a7779_init_irq_dt(void) |
| 722 | { | 722 | { |
| 723 | #ifdef CONFIG_ARCH_SHMOBILE_LEGACY | ||
| 724 | void __iomem *gic_dist_base = ioremap_nocache(0xf0001000, 0x1000); | ||
| 725 | void __iomem *gic_cpu_base = ioremap_nocache(0xf0000100, 0x1000); | ||
| 726 | #endif | ||
| 723 | gic_arch_extn.irq_set_wake = r8a7779_set_wake; | 727 | gic_arch_extn.irq_set_wake = r8a7779_set_wake; |
| 724 | 728 | ||
| 729 | #ifdef CONFIG_ARCH_SHMOBILE_LEGACY | ||
| 730 | gic_init(0, 29, gic_dist_base, gic_cpu_base); | ||
| 731 | #else | ||
| 725 | irqchip_init(); | 732 | irqchip_init(); |
| 726 | 733 | #endif | |
| 727 | /* route all interrupts to ARM */ | 734 | /* route all interrupts to ARM */ |
| 728 | __raw_writel(0xffffffff, INT2NTSR0); | 735 | __raw_writel(0xffffffff, INT2NTSR0); |
| 729 | __raw_writel(0x3fffffff, INT2NTSR1); | 736 | __raw_writel(0x3fffffff, INT2NTSR1); |
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 93ebe3430bfe..fb5e1bb34be8 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c | |||
| @@ -595,6 +595,7 @@ static struct platform_device ipmmu_device = { | |||
| 595 | 595 | ||
| 596 | static struct renesas_intc_irqpin_config irqpin0_platform_data = { | 596 | static struct renesas_intc_irqpin_config irqpin0_platform_data = { |
| 597 | .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ | 597 | .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ |
| 598 | .control_parent = true, | ||
| 598 | }; | 599 | }; |
| 599 | 600 | ||
| 600 | static struct resource irqpin0_resources[] = { | 601 | static struct resource irqpin0_resources[] = { |
| @@ -656,6 +657,7 @@ static struct platform_device irqpin1_device = { | |||
| 656 | 657 | ||
| 657 | static struct renesas_intc_irqpin_config irqpin2_platform_data = { | 658 | static struct renesas_intc_irqpin_config irqpin2_platform_data = { |
| 658 | .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ | 659 | .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ |
| 660 | .control_parent = true, | ||
| 659 | }; | 661 | }; |
| 660 | 662 | ||
| 661 | static struct resource irqpin2_resources[] = { | 663 | static struct resource irqpin2_resources[] = { |
| @@ -686,6 +688,7 @@ static struct platform_device irqpin2_device = { | |||
| 686 | 688 | ||
| 687 | static struct renesas_intc_irqpin_config irqpin3_platform_data = { | 689 | static struct renesas_intc_irqpin_config irqpin3_platform_data = { |
| 688 | .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ | 690 | .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ |
| 691 | .control_parent = true, | ||
| 689 | }; | 692 | }; |
| 690 | 693 | ||
| 691 | static struct resource irqpin3_resources[] = { | 694 | static struct resource irqpin3_resources[] = { |
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index cb3073e4e7a8..d429129ecb3d 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts | |||
| @@ -22,7 +22,7 @@ | |||
| 22 | }; | 22 | }; |
| 23 | 23 | ||
| 24 | chosen { | 24 | chosen { |
| 25 | stdout-path = &soc_uart0; | 25 | stdout-path = "serial0:115200n8"; |
| 26 | }; | 26 | }; |
| 27 | 27 | ||
| 28 | psci { | 28 | psci { |
