4 files changed, 31 insertions, 65 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bcaa8c83e522..bf856f492eb5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -42,6 +42,11 @@ config GENERIC_GPIO
 
 config GENERIC_TIME
         bool
+        default y
+
+config ARCH_USES_GETTIMEOFFSET
+        bool
+        default n
 
 config GENERIC_CLOCKEVENTS
         bool
@@ -231,6 +236,7 @@ config ARCH_AAEC2000
         select CPU_ARM920T
         select ARM_AMBA
         select HAVE_CLK
+        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for systems based on the Agilent AAEC-2000
 
@@ -271,6 +277,7 @@ config ARCH_AT91
         select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
         select HAVE_CLK
+        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for systems based on the Atmel AT91RM9200,
           AT91SAM9 and AT91CAP9 processors.
@@ -290,6 +297,7 @@ config ARCH_BCMRING
 config ARCH_CLPS711X
         bool "Cirrus Logic CLPS711x/EP721x-based"
         select CPU_ARM720T
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for Cirrus Logic 711x/721x based boards.
 
@@ -298,6 +306,7 @@ config ARCH_GEMINI
         select CPU_FA526
         select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for the Cortina Systems Gemini family SoCs
 
@@ -306,6 +315,7 @@ config ARCH_EBSA110
         select CPU_SA110
         select ISA
         select NO_IOPORT
+        select ARCH_USES_GETTIMEOFFSET
         help
           This is an evaluation board for the StrongARM processor available
           from Digital. It has limited hardware on-board, including an
@@ -321,6 +331,7 @@ config ARCH_EP93XX
         select COMMON_CLKDEV
         select ARCH_REQUIRE_GPIOLIB
         select ARCH_HAS_HOLES_MEMORYMODEL
+        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -328,6 +339,7 @@ config ARCH_FOOTBRIDGE
         bool "FootBridge"
         select CPU_SA110
         select FOOTBRIDGE
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for systems based on the DC21285 companion chip
           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -366,6 +378,7 @@ config ARCH_H720X
         bool "Hynix HMS720x-based"
         select CPU_ARM720T
         select ISA_DMA_API
+        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for systems based on the Hynix HMS720x
 
@@ -408,6 +421,7 @@ config ARCH_IXP23XX
         depends on MMU
         select CPU_XSC3
         select PCI
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -416,6 +430,7 @@ config ARCH_IXP2000
         depends on MMU
         select CPU_XSCALE
         select PCI
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -434,6 +449,7 @@ config ARCH_L7200
         bool "LinkUp-L7200"
         select CPU_ARM720T
         select FIQ
+        select ARCH_USES_GETTIMEOFFSET
         help
           Say Y here if you intend to run this kernel on a LinkUp Systems
           L7200 Software Development Board which uses an ARM720T processor.
@@ -523,6 +539,7 @@ config ARCH_KS8695
         select CPU_ARM922T
         select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
           System-on-Chip devices.
@@ -569,6 +586,7 @@ config ARCH_PNX4008
         bool "Philips Nexperia PNX4008 Mobile"
         select CPU_ARM926T
         select COMMON_CLKDEV
+        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for Philips PNX4008 mobile platform.
 
@@ -613,6 +631,7 @@ config ARCH_RPC
         select ISA_DMA_API
         select NO_IOPORT
         select ARCH_SPARSEMEM_ENABLE
+        select ARCH_USES_GETTIMEOFFSET
         help
           On the Acorn Risc-PC, Linux can support the internal IDE disk and
           CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -639,6 +658,7 @@ config ARCH_S3C2410
         select GENERIC_GPIO
         select ARCH_HAS_CPUFREQ
         select HAVE_CLK
+        select ARCH_USES_GETTIMEOFFSET
         help
           Samsung S3C2410X CPU based systems, such as the Simtec Electronics
           BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -652,6 +672,7 @@ config ARCH_S3C64XX
         select ARM_VIC
         select HAVE_CLK
         select NO_IOPORT
+        select ARCH_USES_GETTIMEOFFSET
         select ARCH_HAS_CPUFREQ
         select ARCH_REQUIRE_GPIOLIB
         select SAMSUNG_CLKSRC
@@ -708,6 +729,7 @@ config ARCH_SHARK
         select ISA_DMA
         select ZONE_DMA
         select PCI
+        select ARCH_USES_GETTIMEOFFSET
         help
           Support for the StrongARM based Digital DNARD machine, also known
           as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -717,6 +739,7 @@ config ARCH_LH7A40X
         select CPU_ARM922T
         select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
         select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+        select ARCH_USES_GETTIMEOFFSET
         help
           Say Y here for systems based on one of the Sharp LH7A40X
           System on a Chip processors.  These CPUs include an ARM922T
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 8bffc3ff3acf..35d408f6dccf 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -38,7 +38,7 @@ struct sys_timer {
         void                    (*init)(void);
         void                    (*suspend)(void);
         void                    (*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
         unsigned long           (*offset)(void);
 #endif
 };
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 28753805d2d1..38c261f9951c 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
 {
+        if (system_timer->offset != NULL)
+                return system_timer->offset() * 1000;
+
         return 0;
 }
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
@@ -93,63 +96,6 @@ static inline void do_leds(void)
 #define do_leds()
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-        unsigned long flags;
-        unsigned long seq;
-        unsigned long usec, sec;
-
-        do {
-                seq = read_seqbegin_irqsave(&xtime_lock, flags);
-                usec = system_timer->offset();
-                sec = xtime.tv_sec;
-                usec += xtime.tv_nsec / 1000;
-        } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-        /* usec may have gone up a lot: be safe */
-        while (usec >= 1000000) {
-                usec -= 1000000;
-                sec++;
-        }
-
-        tv->tv_sec = sec;
-        tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-        time_t wtm_sec, sec = tv->tv_sec;
-        long wtm_nsec, nsec = tv->tv_nsec;
-
-        if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-                return -EINVAL;
-
-        write_seqlock_irq(&xtime_lock);
-        /*
-         * This is revolting. We need to set "xtime" correctly. However, the
-         * value in this location is the value at the most recent update of
-         * wall time.  Discover what correction gettimeofday() would have
-         * done, and then undo it!
-         */
-        nsec -= system_timer->offset() * NSEC_PER_USEC;
-
-        wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-        wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-        set_normalized_timespec(&xtime, sec, nsec);
-        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-        ntp_clear();
-        write_sequnlock_irq(&xtime_lock);
-        clock_was_set();
-        return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
 
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
@@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs);
 
 void __init time_init(void)
 {
-#ifndef CONFIG_GENERIC_TIME
-        if (system_timer->offset == NULL)
-                system_timer->offset = dummy_gettimeoffset;
-#endif
         system_timer->init();
 }
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2db43a5ddd9b..8a5e8e9fe448 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -97,6 +97,7 @@ config ARCH_AT572D940HF
 
 config ARCH_AT91X40
         bool "AT91x40"
+        select ARCH_USES_GETTIMEOFFSET
 
 endchoice