410 files changed, 3870 insertions, 4371 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 849e3ad93707..2deb911d59f4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -651,6 +651,7 @@ config ARCH_PICOXCELL
         select HAVE_SCHED_CLOCK
         select HAVE_TCM
         select NO_IOPORT
+        select SPARSE_IRQ
         select USE_OF
         help
           This enables support for systems based on the Picochip picoXcell
@@ -883,7 +884,6 @@ config ARCH_U300
         select HAVE_MACH_CLKDEV
         select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
-        select NEED_MACH_MEMORY_H
         help
           Support for ST-Ericsson U300 series mobile platforms.
 
@@ -1960,7 +1960,7 @@ endchoice
 
 config XIP_KERNEL
         bool "Kernel Execute-In-Place from ROM"
-        depends on !ZBOOT_ROM
+        depends on !ZBOOT_ROM && !ARM_LPAE
         help
           Execute-In-Place allows the kernel to run from non-volatile storage
           directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1990,7 +1990,7 @@ config XIP_PHYS_ADDR
 
 config KEXEC
         bool "Kexec system call (EXPERIMENTAL)"
-        depends on EXPERIMENTAL
+        depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
         help
           kexec is a system call that implements the ability to shutdown your
           current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c5213e78606b..e0d236d7ff73 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -100,6 +100,14 @@ choice
                   Note that the system will appear to hang during boot if there
                   is nothing connected to read from the DCC.
 
+        config AT91_DEBUG_LL_DBGU0
+                bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
+                depends on HAVE_AT91_DBGU0
+
+        config AT91_DEBUG_LL_DBGU1
+                bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+                depends on HAVE_AT91_DBGU1
+
         config DEBUG_FOOTBRIDGE_COM1
                 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
                 depends on FOOTBRIDGE
@@ -247,6 +255,43 @@ choice
                   their output to the standard serial port on the RealView
                   PB1176 platform.
 
+        config DEBUG_MSM_UART1
+                bool "Kernel low-level debugging messages via MSM UART1"
+                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the first serial port on MSM devices.
+
+        config DEBUG_MSM_UART2
+                bool "Kernel low-level debugging messages via MSM UART2"
+                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the second serial port on MSM devices.
+
+        config DEBUG_MSM_UART3
+                bool "Kernel low-level debugging messages via MSM UART3"
+                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the third serial port on MSM devices.
+
+        config DEBUG_MSM8660_UART
+                bool "Kernel low-level debugging messages via MSM 8660 UART"
+                depends on ARCH_MSM8X60
+                select MSM_HAS_DEBUG_UART_HS
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the serial port on MSM 8660 devices.
+
+        config DEBUG_MSM8960_UART
+                bool "Kernel low-level debugging messages via MSM 8960 UART"
+                depends on ARCH_MSM8960
+                select MSM_HAS_DEBUG_UART_HS
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the serial port on MSM 8960 devices.
+
 endchoice
 
 config EARLY_PRINTK
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c2effc917254..c5d60250d43d 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -659,6 +659,7 @@ __armv7_mmu_cache_on:
                 mcrne   p15, 0, r3, c2, c0, 0   @ load page table pointer
                 mcrne   p15, 0, r1, c3, c0, 0   @ load domain access control
 #endif
+                mcr     p15, 0, r0, c7, c5, 4   @ ISB
                 mcr     p15, 0, r0, c1, c0, 0   @ load control register
                 mrc     p15, 0, r0, c1, c0, 0   @ and read it back
                 mov     r0, #0
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 74df9ca2be31..81a933eb0903 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,8 +1,14 @@
 config ARM_GIC
         select IRQ_DOMAIN
+        select MULTI_IRQ_HANDLER
+        bool
+
+config GIC_NON_BANKED
         bool
 
 config ARM_VIC
+        select IRQ_DOMAIN
+        select MULTI_IRQ_HANDLER
         bool
 
 config ARM_VIC_NR
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 410a546060a2..b2dc2dd7f1df 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -40,13 +40,36 @@
 #include <linux/slab.h>
 
 #include <asm/irq.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+union gic_base {
+        void __iomem *common_base;
+        void __percpu __iomem **percpu_base;
+};
 
-/* Address of GIC 0 CPU interface */
-void __iomem *gic_cpu_base_addr __read_mostly;
+struct gic_chip_data {
+        unsigned int irq_offset;
+        union gic_base dist_base;
+        union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+        u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+        u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+        u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+        u32 __percpu *saved_ppi_enable;
+        u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+        struct irq_domain domain;
+#endif
+        unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+        void __iomem *(*get_base)(union gic_base *);
+#endif
+};
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
 /*
  * Supported arch specific GIC irq extension.
@@ -67,16 +90,48 @@ struct irq_chip gic_arch_extn = {
 
 static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
 
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+        return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+        return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+        return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+        return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+                                         void __iomem *(*f)(union gic_base *))
+{
+        data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d)   ((d)->dist_base.common_base)
+#define gic_data_cpu_base(d)    ((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
 static inline void __iomem *gic_dist_base(struct irq_data *d)
 {
         struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-        return gic_data->dist_base;
+        return gic_data_dist_base(gic_data);
 }
 
 static inline void __iomem *gic_cpu_base(struct irq_data *d)
 {
         struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-        return gic_data->cpu_base;
+        return gic_data_cpu_base(gic_data);
 }
 
 static inline unsigned int gic_irq(struct irq_data *d)
@@ -215,6 +270,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on)
 #define gic_set_wake    NULL
 #endif
 
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+        u32 irqstat, irqnr;
+        struct gic_chip_data *gic = &gic_data[0];
+        void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+        do {
+                irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+                irqnr = irqstat & ~0x1c00;
+
+                if (likely(irqnr > 15 && irqnr < 1021)) {
+                        irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+                        handle_IRQ(irqnr, regs);
+                        continue;
+                }
+                if (irqnr < 16) {
+                        writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+                        handle_IPI(irqnr, regs);
+#endif
+                        continue;
+                }
+                break;
+        } while (1);
+}
+
 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
         struct gic_chip_data *chip_data = irq_get_handler_data(irq);
@@ -225,7 +306,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
         chained_irq_enter(chip, desc);
 
         raw_spin_lock(&irq_controller_lock);
-        status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
+        status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
         raw_spin_unlock(&irq_controller_lock);
 
         gic_irq = (status & 0x3ff);
@@ -270,7 +351,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
         u32 cpumask;
         unsigned int gic_irqs = gic->gic_irqs;
         struct irq_domain *domain = &gic->domain;
-        void __iomem *base = gic->dist_base;
+        void __iomem *base = gic_data_dist_base(gic);
         u32 cpu = 0;
 
 #ifdef CONFIG_SMP
@@ -330,8 +411,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 
 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 {
-        void __iomem *dist_base = gic->dist_base;
-        void __iomem *base = gic->cpu_base;
+        void __iomem *dist_base = gic_data_dist_base(gic);
+        void __iomem *base = gic_data_cpu_base(gic);
         int i;
 
         /*
@@ -368,7 +449,7 @@ static void gic_dist_save(unsigned int gic_nr)
                 BUG();
 
         gic_irqs = gic_data[gic_nr].gic_irqs;
-        dist_base = gic_data[gic_nr].dist_base;
+        dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
         if (!dist_base)
                 return;
@@ -403,7 +484,7 @@ static void gic_dist_restore(unsigned int gic_nr)
                 BUG();
 
         gic_irqs = gic_data[gic_nr].gic_irqs;
-        dist_base = gic_data[gic_nr].dist_base;
+        dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
         if (!dist_base)
                 return;
@@ -439,8 +520,8 @@ static void gic_cpu_save(unsigned int gic_nr)
         if (gic_nr >= MAX_GIC_NR)
                 BUG();
 
-        dist_base = gic_data[gic_nr].dist_base;
-        cpu_base = gic_data[gic_nr].cpu_base;
+        dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+        cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
         if (!dist_base || !cpu_base)
                 return;
@@ -465,8 +546,8 @@ static void gic_cpu_restore(unsigned int gic_nr)
         if (gic_nr >= MAX_GIC_NR)
                 BUG();
 
-        dist_base = gic_data[gic_nr].dist_base;
-        cpu_base = gic_data[gic_nr].cpu_base;
+        dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+        cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
         if (!dist_base || !cpu_base)
                 return;
@@ -491,6 +572,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
         int i;
 
         for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+                /* Skip over unused GICs */
+                if (!gic_data[i].get_base)
+                        continue;
+#endif
                 switch (cmd) {
                 case CPU_PM_ENTER:
                         gic_cpu_save(i);
@@ -564,8 +650,9 @@ const struct irq_domain_ops gic_irq_domain_ops = {
 #endif
 };
 
-void __init gic_init(unsigned int gic_nr, int irq_start,
-        void __iomem *dist_base, void __iomem *cpu_base)
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+                           void __iomem *dist_base, void __iomem *cpu_base,
+                           u32 percpu_offset)
 {
         struct gic_chip_data *gic;
         struct irq_domain *domain;
@@ -575,8 +662,36 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 
         gic = &gic_data[gic_nr];
         domain = &gic->domain;
-        gic->dist_base = dist_base;
-        gic->cpu_base = cpu_base;
+#ifdef CONFIG_GIC_NON_BANKED
+        if (percpu_offset) { /* Frankein-GIC without banked registers... */
+                unsigned int cpu;
+
+                gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+                gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+                if (WARN_ON(!gic->dist_base.percpu_base ||
+                            !gic->cpu_base.percpu_base)) {
+                        free_percpu(gic->dist_base.percpu_base);
+                        free_percpu(gic->cpu_base.percpu_base);
+                        return;
+                }
+
+                for_each_possible_cpu(cpu) {
+                        unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+                        *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+                        *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+                }
+
+                gic_set_base_accessor(gic, gic_get_percpu_base);
+        } else
+#endif
+        {                       /* Normal, sane GIC... */
+                WARN(percpu_offset,
+                     "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+                     percpu_offset);
+                gic->dist_base.common_base = dist_base;
+                gic->cpu_base.common_base = cpu_base;
+                gic_set_base_accessor(gic, gic_get_common_base);
+        }
 
         /*
          * For primary GICs, skip over SGIs.
@@ -584,8 +699,6 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
          */
         domain->hwirq_base = 32;
         if (gic_nr == 0) {
-                gic_cpu_base_addr = cpu_base;
-
                 if ((irq_start & 31) > 0) {
                         domain->hwirq_base = 16;
                         if (irq_start != -1)
@@ -597,7 +710,7 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
          * Find out how many interrupts are supported.
          * The GIC only supports up to 1020 interrupt sources.
          */
-        gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+        gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
         gic_irqs = (gic_irqs + 1) * 32;
         if (gic_irqs > 1020)
                 gic_irqs = 1020;
@@ -645,7 +758,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
         dsb();
 
         /* this always happens on GIC0 */
-        writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+        writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 }
 #endif
 
@@ -656,6 +769,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
         void __iomem *cpu_base;
         void __iomem *dist_base;
+        u32 percpu_offset;
         int irq;
         struct irq_domain *domain = &gic_data[gic_cnt].domain;
 
@@ -668,9 +782,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
         cpu_base = of_iomap(node, 1);
         WARN(!cpu_base, "unable to map gic cpu registers\n");
 
+        if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+                percpu_offset = 0;
+
         domain->of_node = of_node_get(node);
 
-        gic_init(gic_cnt, -1, dist_base, cpu_base);
+        gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
 
         if (parent) {
                 irq = irq_of_parse_and_map(node, 0);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 01f18a421b17..77287504c8b4 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -19,17 +19,22 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-#ifdef CONFIG_PM
 /**
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
@@ -40,6 +45,7 @@
  * @int_enable: Save for VIC_INT_ENABLE.
  * @soft_int: Save for VIC_INT_SOFT.
  * @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
  */
 struct vic_device {
         void __iomem    *base;
@@ -50,13 +56,13 @@ struct vic_device {
         u32             int_enable;
         u32             soft_int;
         u32             protect;
+        struct irq_domain domain;
 };
 
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
-#endif /* CONFIG_PM */
 
 /**
  * vic_init2 - common initialisation code
@@ -156,39 +162,50 @@ static int __init vic_pm_init(void)
         return 0;
 }
 late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
 
 /**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
  * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
  *
  * Register the VIC with the system device tree so that it can be notified
  * of suspend and resume requests and ensure that the correct actions are
  * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
  */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+                                u32 resume_sources, struct device_node *node)
 {
         struct vic_device *v;
 
-        if (vic_id >= ARRAY_SIZE(vic_devices))
+        if (vic_id >= ARRAY_SIZE(vic_devices)) {
                 printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-        else {
-                v = &vic_devices[vic_id];
-                v->base = base;
-                v->resume_sources = resume_sources;
-                v->irq = irq;
-                vic_id++;
+                return;
         }
+
+        v = &vic_devices[vic_id];
+        v->base = base;
+        v->resume_sources = resume_sources;
+        v->irq = irq;
+        vic_id++;
+
+        v->domain.irq_base = irq;
+        v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+        v->domain.of_node = of_node_get(node);
+        v->domain.ops = &irq_domain_simple_ops;
+#endif /* CONFIG_OF */
+        irq_domain_add(&v->domain);
 }
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
 
 static void vic_ack_irq(struct irq_data *d)
 {
         void __iomem *base = irq_data_get_irq_chip_data(d);
-        unsigned int irq = d->irq & 31;
+        unsigned int irq = d->hwirq;
         writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
         /* moreover, clear the soft-triggered, in case it was the reason */
         writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
@@ -197,14 +214,14 @@ static void vic_ack_irq(struct irq_data *d)
 static void vic_mask_irq(struct irq_data *d)
 {
         void __iomem *base = irq_data_get_irq_chip_data(d);
-        unsigned int irq = d->irq & 31;
+        unsigned int irq = d->hwirq;
         writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 
 static void vic_unmask_irq(struct irq_data *d)
 {
         void __iomem *base = irq_data_get_irq_chip_data(d);
-        unsigned int irq = d->irq & 31;
+        unsigned int irq = d->hwirq;
         writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
@@ -226,7 +243,7 @@ static struct vic_device *vic_from_irq(unsigned int irq)
 static int vic_set_wake(struct irq_data *d, unsigned int on)
 {
         struct vic_device *v = vic_from_irq(d->irq);
-        unsigned int off = d->irq & 31;
+        unsigned int off = d->hwirq;
         u32 bit = 1 << off;
 
         if (!v)
@@ -301,7 +318,7 @@ static void __init vic_set_irq_sources(void __iomem *base,
  *  and 020 within the page. We call this "second block".
  */
 static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
-                                u32 vic_sources)
+                               u32 vic_sources, struct device_node *node)
 {
         unsigned int i;
         int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
@@ -328,17 +345,12 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
         }
 
         vic_set_irq_sources(base, irq_start, vic_sources);
+        vic_register(base, irq_start, 0, node);
 }
 
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-                     u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+                              u32 vic_sources, u32 resume_sources,
+                              struct device_node *node)
 {
         unsigned int i;
         u32 cellid = 0;
@@ -356,7 +368,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
         switch(vendor) {
         case AMBA_VENDOR_ST:
-                vic_init_st(base, irq_start, vic_sources);
+                vic_init_st(base, irq_start, vic_sources, node);
                 return;
         default:
                 printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
@@ -375,5 +387,81 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
         vic_set_irq_sources(base, irq_start, vic_sources);
 
-        vic_pm_register(base, irq_start, resume_sources);
+        vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+                     u32 vic_sources, u32 resume_sources)
+{
+        __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+        void __iomem *regs;
+        int irq_base;
+
+        if (WARN(parent, "non-root VICs are not supported"))
+                return -EINVAL;
+
+        regs = of_iomap(node, 0);
+        if (WARN_ON(!regs))
+                return -EIO;
+
+        irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+        if (WARN_ON(irq_base < 0))
+                goto out_unmap;
+
+        __vic_init(regs, irq_base, ~0, ~0, node);
+
+        return 0;
+
+ out_unmap:
+        iounmap(regs);
+
+        return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+        u32 stat, irq;
+        int handled = 0;
+
+        stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+        while (stat) {
+                irq = ffs(stat) - 1;
+                handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+                stat &= ~(1 << irq);
+                handled = 1;
+        }
+
+        return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+        int i, handled;
+
+        do {
+                for (i = 0, handled = 0; i < vic_id; ++i)
+                        handled |= handle_one_vic(&vic_devices[i], regs);
+        } while (handled);
 }
diff --git a/arch/arm/configs/pcontrol_g20_defconfig b/arch/arm/configs/pcontrol_g20_defconfig
deleted file mode 100644
index c75c9fcede58..000000000000
--- a/arch/arm/configs/pcontrol_g20_defconfig
+++ /dev/null
@@ -1,175 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="/opt/arm-2010q1/bin/arm-none-linux-gnueabi-"
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_PCONTROL_G20=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 mem=128M mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) root=/dev/mmcblk0p1 rootwait rw"
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_AT24=m
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACVLAN=m
-CONFIG_TUN=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-CONFIG_SMSC911X=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_MATRIX=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_MAX3100=m
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_R3964=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=m
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_W1_SLAVE_DS2431=m
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_AUXDISPLAY=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV=y
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_IIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 29035e86a59d..b6e65dedfd71 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -187,6 +187,17 @@
 #endif
 
 /*
+ * Instruction barrier
+ */
+        .macro  instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+        isb
+#elif __LINUX_ARM_ARCH__ == 6
+        mcr     p15, 0, r0, c7, c5, 4
+#endif
+        .endm
+
+/*
  * SMP data memory barrier
  */
         .macro  smp_dmb mode
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
new file mode 100644
index 000000000000..a0ada3ea4358
--- /dev/null
+++ b/arch/arm/include/asm/cti.h
@@ -0,0 +1,179 @@
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include        <asm/io.h>
+
+/* The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ */
+#define         CTICONTROL              0x000
+#define         CTISTATUS               0x004
+#define         CTILOCK                 0x008
+#define         CTIPROTECTION           0x00C
+#define         CTIINTACK               0x010
+#define         CTIAPPSET               0x014
+#define         CTIAPPCLEAR             0x018
+#define         CTIAPPPULSE             0x01c
+#define         CTIINEN                 0x020
+#define         CTIOUTEN                0x0A0
+#define         CTITRIGINSTATUS         0x130
+#define         CTITRIGOUTSTATUS        0x134
+#define         CTICHINSTATUS           0x138
+#define         CTICHOUTSTATUS          0x13c
+#define         CTIPERIPHID0            0xFE0
+#define         CTIPERIPHID1            0xFE4
+#define         CTIPERIPHID2            0xFE8
+#define         CTIPERIPHID3            0xFEC
+#define         CTIPCELLID0             0xFF0
+#define         CTIPCELLID1             0xFF4
+#define         CTIPCELLID2             0xFF8
+#define         CTIPCELLID3             0xFFC
+
+/* The below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ */
+#define         LOCKACCESS              0xFB0
+#define         LOCKSTATUS              0xFB4
+
+/* write this value to LOCKACCESS will unlock the module, and
+ * other value will lock the module
+ */
+#define         LOCKCODE                0xC5ACCE55
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ *      the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+        void __iomem *base;
+        int irq;
+        int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ *      the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+        void __iomem *base, int irq, int trig_out)
+{
+        cti->base = base;
+        cti->irq  = irq;
+        cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+        int trig_in, int trig_out, int chan)
+{
+        void __iomem *base = cti->base;
+        unsigned long val;
+
+        val = __raw_readl(base + CTIINEN + trig_in * 4);
+        val |= BIT(chan);
+        __raw_writel(val, base + CTIINEN + trig_in * 4);
+
+        val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+        val |= BIT(chan);
+        __raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+        __raw_writel(0x1, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+        __raw_writel(0, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+        void __iomem *base = cti->base;
+        unsigned long val;
+
+        val = __raw_readl(base + CTIINTACK);
+        val |= BIT(cti->trig_out_for_irq);
+        __raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+        void __iomem *base = cti->base;
+        unsigned long val;
+
+        val = __raw_readl(base + LOCKSTATUS);
+
+        if (val & 1) {
+                val = LOCKCODE;
+                __raw_writel(val, base + LOCKACCESS);
+        }
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+        void __iomem *base = cti->base;
+        unsigned long val;
+
+        val = __raw_readl(base + LOCKSTATUS);
+
+        if (!(val & 1)) {
+                val = ~LOCKCODE;
+                __raw_writel(val, base + LOCKACCESS);
+        }
+}
+#endif
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
deleted file mode 100644
index 3ceb85e43850..000000000000
--- a/arch/arm/include/asm/entry-macro-vic2.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* arch/arm/include/asm/entry-macro-vic2.S
- *
- * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for a device with two VICs
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* This should be included from <mach/entry-macro.S> with the necessary
- * defines for virtual addresses and IRQ bases for the two vics.
- *
- * The code needs the following defined:
- *      IRQ_VIC0_BASE   IRQ number of VIC0's first IRQ
- *      IRQ_VIC1_BASE   IRQ number of VIC1's first IRQ
- *      VA_VIC0         Virtual address of VIC0
- *      VA_VIC1         Virtual address of VIC1
- *
- * Note, code assumes VIC0's virtual address is an ARM immediate constant
- * away from VIC1.
-*/
-
-#include <asm/hardware/vic.h>
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =VA_VIC0
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-        @ check the vic0
-        mov     \irqnr, #IRQ_VIC0_BASE + 31
-        ldr     \irqstat, [ \base, # VIC_IRQ_STATUS ]
-        teq     \irqstat, #0
-
-        @ otherwise try vic1
-        addeq   \tmp, \base, #(VA_VIC1 - VA_VIC0)
-        addeq   \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
-        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-        teqeq   \irqstat, #0
-
-        clzne   \irqstat, \irqstat
-        subne   \irqnr, \irqnr, \irqstat
-        .endm
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
deleted file mode 100644
index 74ebc803904d..000000000000
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-gic.S
- *
- * Low-level IRQ helper macros for GIC
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/gic.h>
-
-#ifndef HAVE_GET_IRQNR_PREAMBLE
-        .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =gic_cpu_base_addr
-        ldr     \base, [\base]
-        .endm
-#endif
-
-/*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec.  To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-31 are local.  We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt.  We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-        ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-        /* bits 12-10 = src CPU, 9-0 = int # */
-
-        ldr     \tmp, =1021
-        bic     \irqnr, \irqstat, #0x1c00
-        cmp     \irqnr, #15
-        cmpcc   \irqnr, \irqnr
-        cmpne   \irqnr, \tmp
-        cmpcs   \irqnr, \irqnr
-        .endm
-
-/* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
-        .macro test_for_ipi, irqnr, irqstat, base, tmp
-        bic     \irqnr, \irqstat, #0x1c00
-        cmp     \irqnr, #16
-        strcc   \irqstat, [\base, #GIC_CPU_EOI]
-        cmpcs   \irqnr, \irqnr
-        .endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 3e91f22046f5..4bdfe0018696 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,30 +36,22 @@
 #include <linux/irqdomain.h>
 struct device_node;
 
-extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
-void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
+                    u32 offset);
 int gic_of_init(struct device_node *node, struct device_node *parent);
 void gic_secondary_init(unsigned int);
+void gic_handle_irq(struct pt_regs *regs);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 
-struct gic_chip_data {
-        void __iomem *dist_base;
-        void __iomem *cpu_base;
-#ifdef CONFIG_CPU_PM
-        u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
-        u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
-        u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
-        u32 __percpu *saved_ppi_enable;
-        u32 __percpu *saved_ppi_conf;
-#endif
-#ifdef CONFIG_IRQ_DOMAIN
-        struct irq_domain domain;
-#endif
-        unsigned int gic_irqs;
-};
+static inline void gic_init(unsigned int nr, int start,
+                            void __iomem *dist , void __iomem *cpu)
+{
+        gic_init_bases(nr, start, dist, cpu, 0);
+}
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index 5d72550a8097..f42ebd619590 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,15 @@
 #define VIC_PL192_VECT_ADDR             0xF00
 
 #ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+struct device_node;
+struct pt_regs;
+
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-#endif
+int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
 
+#endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h
new file mode 100644
index 000000000000..bf863edb517d
--- /dev/null
+++ b/arch/arm/include/asm/idmap.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_IDMAP_H
+#define __ASM_IDMAP_H
+
+#include <linux/compiler.h>
+#include <asm/pgtable.h>
+
+/* Tag a function as requiring to be executed via an identity mapping. */
+#define __idmap __section(.idmap.text) noinline notrace
+
+extern pgd_t *idmap_pgd;
+
+void setup_mm_for_reboot(void);
+
+#endif  /* __ASM_IDMAP_H */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index ca94653f1ecb..97b440c25c58 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -151,7 +151,11 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)        memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-types.h>
+#else
 #include <asm/pgtable-2level-types.h>
+#endif
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 0f8e3827a89b..99cfe3607989 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -32,7 +32,4 @@ enum arm_perf_pmu_ids {
 extern enum arm_perf_pmu_ids
 armpmu_get_pmu_id(void);
 
-extern int
-armpmu_get_max_events(void);
-
 #endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3e08fd3fbb6b..943504f53f57 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -25,12 +25,34 @@
 #define _PAGE_USER_TABLE        (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
 #define _PAGE_KERNEL_TABLE      (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
 
+#ifdef CONFIG_ARM_LPAE
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+        return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+        BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+        free_page((unsigned long)pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+        set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+}
+
+#else   /* !CONFIG_ARM_LPAE */
+
 /*
  * Since we have only two-level page tables, these are trivial
  */
 #define pmd_alloc_one(mm,addr)          ({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, pmd)               do { } while (0)
-#define pgd_populate(mm,pmd,pte)        BUG()
+#define pud_populate(mm,pmd,pte)        BUG()
+
+#endif  /* CONFIG_ARM_LPAE */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
@@ -109,7 +131,9 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
 {
         pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
         pmdp[0] = __pmd(pmdval);
+#ifndef CONFIG_ARM_LPAE
         pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+#endif
         flush_pmd_entry(pmdp);
 }
 
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 470457e1cfc5..2317a71c8f8e 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -140,4 +140,45 @@
 #define L_PTE_MT_DEV_CACHED     (_AT(pteval_t, 0x0b) << 2)      /* 1011 */
 #define L_PTE_MT_MASK           (_AT(pteval_t, 0x0f) << 2)
 
+#ifndef __ASSEMBLY__
+
+/*
+ * The "pud_xxx()" functions here are trivial when the pmd is folded into
+ * the pud: the pud entry is never bad, always exists, and can't be set or
+ * cleared.
+ */
+#define pud_none(pud)           (0)
+#define pud_bad(pud)            (0)
+#define pud_present(pud)        (1)
+#define pud_clear(pudp)         do { } while (0)
+#define set_pud(pud,pudp)       do { } while (0)
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+        return (pmd_t *)pud;
+}
+
+#define pmd_bad(pmd)            (pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)           \
+        do {                            \
+                pmdpd[0] = pmdps[0];    \
+                pmdpd[1] = pmdps[1];    \
+                flush_pmd_entry(pmdpd); \
+        } while (0)
+
+#define pmd_clear(pmdp)                 \
+        do {                            \
+                pmdp[0] = __pmd(0);     \
+                pmdp[1] = __pmd(0);     \
+                clean_pmd_entry(pmdp);  \
+        } while (0)
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* _ASM_PGTABLE_2LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
new file mode 100644
index 000000000000..d7952824c5c4
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/include/asm/pgtable-3level-hwdef.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H
+#define _ASM_PGTABLE_3LEVEL_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1/2 descriptor
+ *   - common
+ */
+#define PMD_TYPE_MASK           (_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_FAULT          (_AT(pmdval_t, 0) << 0)
+#define PMD_TYPE_TABLE          (_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT           (_AT(pmdval_t, 1) << 0)
+#define PMD_BIT4                (_AT(pmdval_t, 0))
+#define PMD_DOMAIN(x)           (_AT(pmdval_t, 0))
+
+/*
+ *   - section
+ */
+#define PMD_SECT_BUFFERABLE     (_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_CACHEABLE      (_AT(pmdval_t, 1) << 3)
+#define PMD_SECT_S              (_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF             (_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_nG             (_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_XN             (_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_AP_WRITE       (_AT(pmdval_t, 0))
+#define PMD_SECT_AP_READ        (_AT(pmdval_t, 0))
+#define PMD_SECT_TEX(x)         (_AT(pmdval_t, 0))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_SECT_UNCACHED       (_AT(pmdval_t, 0) << 2) /* strongly ordered */
+#define PMD_SECT_BUFFERED       (_AT(pmdval_t, 1) << 2) /* normal non-cacheable */
+#define PMD_SECT_WT             (_AT(pmdval_t, 2) << 2) /* normal inner write-through */
+#define PMD_SECT_WB             (_AT(pmdval_t, 3) << 2) /* normal inner write-back */
+#define PMD_SECT_WBWA           (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */
+
+/*
+ * + Level 3 descriptor (PTE)
+ */
+#define PTE_TYPE_MASK           (_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_FAULT          (_AT(pteval_t, 0) << 0)
+#define PTE_TYPE_PAGE           (_AT(pteval_t, 3) << 0)
+#define PTE_BUFFERABLE          (_AT(pteval_t, 1) << 2)         /* AttrIndx[0] */
+#define PTE_CACHEABLE           (_AT(pteval_t, 1) << 3)         /* AttrIndx[1] */
+#define PTE_EXT_SHARED          (_AT(pteval_t, 3) << 8)         /* SH[1:0], inner shareable */
+#define PTE_EXT_AF              (_AT(pteval_t, 1) << 10)        /* Access Flag */
+#define PTE_EXT_NG              (_AT(pteval_t, 1) << 11)        /* nG */
+#define PTE_EXT_XN              (_AT(pteval_t, 1) << 54)        /* XN */
+
+/*
+ * 40-bit physical address supported.
+ */
+#define PHYS_MASK_SHIFT         (40)
+#define PHYS_MASK               ((1ULL << PHYS_MASK_SHIFT) - 1)
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-3level-types.h b/arch/arm/include/asm/pgtable-3level-types.h
new file mode 100644
index 000000000000..921aa30259c4
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level-types.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/include/asm/pgtable-3level-types.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H
+#define _ASM_PGTABLE_3LEVEL_TYPES_H
+
+#include <asm/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pgdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pmdval_t pmd; } pmd_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else   /* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pmdval_t pmd_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif  /* STRICT_MM_TYPECHECKS */
+
+#endif  /* _ASM_PGTABLE_3LEVEL_TYPES_H */
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
new file mode 100644
index 000000000000..759af70f9a0a
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/include/asm/pgtable-3level.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_H
+#define _ASM_PGTABLE_3LEVEL_H
+
+/*
+ * With LPAE, there are 3 levels of page tables. Each level has 512 entries of
+ * 8 bytes each, occupying a 4K page. The first level table covers a range of
+ * 512GB, each entry representing 1GB. Since we are limited to 4GB input
+ * address range, only 4 entries in the PGD are used.
+ *
+ * There are enough spare bits in a page table entry for the kernel specific
+ * state.
+ */
+#define PTRS_PER_PTE            512
+#define PTRS_PER_PMD            512
+#define PTRS_PER_PGD            4
+
+#define PTE_HWTABLE_PTRS        (PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF         (0)
+#define PTE_HWTABLE_SIZE        (PTRS_PER_PTE * sizeof(u64))
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT             30
+
+/*
+ * PMD_SHIFT determines the size a middle-level page table entry can map.
+ */
+#define PMD_SHIFT               21
+
+#define PMD_SIZE                (1UL << PMD_SHIFT)
+#define PMD_MASK                (~(PMD_SIZE-1))
+#define PGDIR_SIZE              (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK              (~(PGDIR_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT           21
+#define SECTION_SIZE            (1UL << SECTION_SHIFT)
+#define SECTION_MASK            (~(SECTION_SIZE-1))
+
+#define USER_PTRS_PER_PGD       (PAGE_OFFSET / PGDIR_SIZE)
+
+/*
+ * "Linux" PTE definitions for LPAE.
+ *
+ * These bits overlap with the hardware bits but the naming is preserved for
+ * consistency with the classic page table format.
+ */
+#define L_PTE_PRESENT           (_AT(pteval_t, 3) << 0)         /* Valid */
+#define L_PTE_FILE              (_AT(pteval_t, 1) << 2)         /* only when !PRESENT */
+#define L_PTE_BUFFERABLE        (_AT(pteval_t, 1) << 2)         /* AttrIndx[0] */
+#define L_PTE_CACHEABLE         (_AT(pteval_t, 1) << 3)         /* AttrIndx[1] */
+#define L_PTE_USER              (_AT(pteval_t, 1) << 6)         /* AP[1] */
+#define L_PTE_RDONLY            (_AT(pteval_t, 1) << 7)         /* AP[2] */
+#define L_PTE_SHARED            (_AT(pteval_t, 3) << 8)         /* SH[1:0], inner shareable */
+#define L_PTE_YOUNG             (_AT(pteval_t, 1) << 10)        /* AF */
+#define L_PTE_XN                (_AT(pteval_t, 1) << 54)        /* XN */
+#define L_PTE_DIRTY             (_AT(pteval_t, 1) << 55)        /* unused */
+#define L_PTE_SPECIAL           (_AT(pteval_t, 1) << 56)        /* unused */
+
+/*
+ * To be used in assembly code with the upper page attributes.
+ */
+#define L_PTE_XN_HIGH           (1 << (54 - 32))
+#define L_PTE_DIRTY_HIGH        (1 << (55 - 32))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define L_PTE_MT_UNCACHED       (_AT(pteval_t, 0) << 2) /* strongly ordered */
+#define L_PTE_MT_BUFFERABLE     (_AT(pteval_t, 1) << 2) /* normal non-cacheable */
+#define L_PTE_MT_WRITETHROUGH   (_AT(pteval_t, 2) << 2) /* normal inner write-through */
+#define L_PTE_MT_WRITEBACK      (_AT(pteval_t, 3) << 2) /* normal inner write-back */
+#define L_PTE_MT_WRITEALLOC     (_AT(pteval_t, 7) << 2) /* normal inner write-alloc */
+#define L_PTE_MT_DEV_SHARED     (_AT(pteval_t, 4) << 2) /* device */
+#define L_PTE_MT_DEV_NONSHARED  (_AT(pteval_t, 4) << 2) /* device */
+#define L_PTE_MT_DEV_WC         (_AT(pteval_t, 1) << 2) /* normal non-cacheable */
+#define L_PTE_MT_DEV_CACHED     (_AT(pteval_t, 3) << 2) /* normal inner write-back */
+#define L_PTE_MT_MASK           (_AT(pteval_t, 7) << 2)
+
+/*
+ * Software PGD flags.
+ */
+#define L_PGD_SWAPPER           (_AT(pgdval_t, 1) << 55)        /* swapper_pg_dir entry */
+
+#ifndef __ASSEMBLY__
+
+#define pud_none(pud)           (!pud_val(pud))
+#define pud_bad(pud)            (!(pud_val(pud) & 2))
+#define pud_present(pud)        (pud_val(pud))
+
+#define pud_clear(pudp)                 \
+        do {                            \
+                *pudp = __pud(0);       \
+                clean_pmd_entry(pudp);  \
+        } while (0)
+
+#define set_pud(pudp, pud)              \
+        do {                            \
+                *pudp = pud;            \
+                flush_pmd_entry(pudp);  \
+        } while (0)
+
+static inline pmd_t *pud_page_vaddr(pud_t pud)
+{
+        return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+/* Find an entry in the second-level page table.. */
+#define pmd_index(addr)         (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
+}
+
+#define pmd_bad(pmd)            (!(pmd_val(pmd) & 2))
+
+#define copy_pmd(pmdpd,pmdps)           \
+        do {                            \
+                *pmdpd = *pmdps;        \
+                flush_pmd_entry(pmdpd); \
+        } while (0)
+
+#define pmd_clear(pmdp)                 \
+        do {                            \
+                *pmdp = __pmd(0);       \
+                clean_pmd_entry(pmdp);  \
+        } while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_3LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
index 183111164ce9..8426229ba292 100644
--- a/arch/arm/include/asm/pgtable-hwdef.h
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -10,6 +10,10 @@
 #ifndef _ASMARM_PGTABLE_HWDEF_H
 #define _ASMARM_PGTABLE_HWDEF_H
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-hwdef.h>
+#else
 #include <asm/pgtable-2level-hwdef.h>
+#endif
 
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9451dce3a553..3f2f0eb76211 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -11,20 +11,24 @@
 #define _ASMARM_PGTABLE_H
 
 #include <linux/const.h>
-#include <asm-generic/4level-fixup.h>
 #include <asm/proc-fns.h>
 
 #ifndef CONFIG_MMU
 
+#include <asm-generic/4level-fixup.h>
 #include "pgtable-nommu.h"
 
 #else
 
+#include <asm-generic/pgtable-nopud.h>
 #include <asm/memory.h>
-#include <mach/vmalloc.h>
 #include <asm/pgtable-hwdef.h>
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level.h>
+#else
 #include <asm/pgtable-2level.h>
+#endif
 
 /*
  * Just any arbitrary offset to the start of the vmalloc VM area: the
@@ -33,14 +37,16 @@
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
  */
-#ifndef VMALLOC_START
 #define VMALLOC_OFFSET          (8*1024*1024)
 #define VMALLOC_START           (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END             0xff000000UL
+
+/* This is a temporary hack until shmobile's DMA area size is sorted out */
+#ifdef CONFIG_ARCH_SHMOBILE
+#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB"
+#undef VMALLOC_END
+#define VMALLOC_END             0xF6000000UL
 #endif
 
 #define LIBRARY_TEXT_START      0x0c000000
@@ -163,39 +169,8 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(addr)      pgd_offset(&init_mm, addr)
 
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)           (0)
-#define pgd_bad(pgd)            (0)
-#define pgd_present(pgd)        (1)
-#define pgd_clear(pgdp)         do { } while (0)
-#define set_pgd(pgd,pgdp)       do { } while (0)
-#define set_pud(pud,pudp)       do { } while (0)
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr)   ((pmd_t *)(dir))
-
 #define pmd_none(pmd)           (!pmd_val(pmd))
 #define pmd_present(pmd)        (pmd_val(pmd))
-#define pmd_bad(pmd)            (pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)           \
-        do {                            \
-                pmdpd[0] = pmdps[0];    \
-                pmdpd[1] = pmdps[1];    \
-                flush_pmd_entry(pmdpd); \
-        } while (0)
-
-#define pmd_clear(pmdp)                 \
-        do {                            \
-                pmdp[0] = __pmd(0);     \
-                pmdp[1] = __pmd(0);     \
-                clean_pmd_entry(pmdp);  \
-        } while (0)
 
 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 {
@@ -204,10 +179,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end)  (end)
-
-
 #ifndef CONFIG_HIGHPTE
 #define __pte_map(pmd)          pmd_page_vaddr(*(pmd))
 #define __pte_unmap(pte)        do { } while (0)
@@ -229,7 +200,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pte_page(pte)           pfn_to_page(pte_pfn(pte))
 #define mk_pte(page,prot)       pfn_pte(page_to_pfn(page), prot)
 
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
 
 #if __LINUX_ARM_ARCH__ < 6
@@ -346,9 +316,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 #define pgtable_cache_init() do { } while (0)
 
-void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
-void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 0bda22c094a6..b5a5be2536c1 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -27,13 +27,22 @@ enum arm_pmu_type {
 /*
  * struct arm_pmu_platdata - ARM PMU platform data
  *
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ *      interrupt and passed the address of the low level handler,
+ *      and can be used to implement any platform specific handling
+ *      before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ *      request_irq and be used to handle some platform specific
+ *      irq enablement
+ * @disable_irq: an optional handler which will be called before
+ *      free_irq and be used to handle some platform specific
+ *      irq disablement
  */
 struct arm_pmu_platdata {
         irqreturn_t (*handle_irq)(int irq, void *dev,
                                   irq_handler_t pmu_handler);
+        void (*enable_irq)(int irq);
+        void (*disable_irq)(int irq);
 };
 
 #ifdef CONFIG_CPU_HAS_PMU
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 9e92cb205e65..f3628fb3d2b3 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -65,7 +65,11 @@ extern struct processor {
          * Set a possibly extended PTE.  Non-extended PTEs should
          * ignore 'ext'.
          */
+#ifdef CONFIG_ARM_LPAE
+        void (*set_pte_ext)(pte_t *ptep, pte_t pte);
+#else
         void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
 
         /* Suspend/resume */
         unsigned int suspend_size;
@@ -79,7 +83,11 @@ extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
 extern void cpu_dcache_clean_area(void *, int);
 extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+#ifdef CONFIG_ARM_LPAE
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
+#else
 extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
 extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 
 /* These three are private to arch/arm/kernel/suspend.c */
@@ -107,6 +115,18 @@ extern void cpu_resume(void);
 
 #define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
 
+#ifdef CONFIG_ARM_LPAE
+#define cpu_get_pgd()   \
+        ({                                              \
+                unsigned long pg, pg2;                  \
+                __asm__("mrrc   p15, 0, %0, %1, c2"     \
+                        : "=r" (pg), "=r" (pg2)         \
+                        :                               \
+                        : "cc");                        \
+                pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1);  \
+                (pgd_t *)phys_to_virt(pg);              \
+        })
+#else
 #define cpu_get_pgd()   \
         ({                                              \
                 unsigned long pg;                       \
@@ -115,6 +135,7 @@ extern void cpu_resume(void);
                 pg &= ~0x3fff;                          \
                 (pgd_t *)phys_to_virt(pg);              \
         })
+#endif
 
 #endif
 
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 03775b14be87..e4c96cc6ec0c 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -80,6 +80,14 @@ struct siginfo;
 void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
                 unsigned long err, unsigned long trap);
 
+#ifdef CONFIG_ARM_LPAE
+#define FAULT_CODE_ALIGNMENT    33
+#define FAULT_CODE_DEBUG        34
+#else
+#define FAULT_CODE_ALIGNMENT    1
+#define FAULT_CODE_DEBUG        2
+#endif
+
 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
                                        struct pt_regs *),
                      int sig, int code, const char *name);
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 265f908c4a6e..5d3ed7e38561 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -202,8 +202,18 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
         tlb_remove_page(tlb, pte);
 }
 
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+                                  unsigned long addr)
+{
+#ifdef CONFIG_ARM_LPAE
+        tlb_add_flush(tlb, addr);
+        tlb_remove_page(tlb, virt_to_page(pmdp));
+#endif
+}
+
 #define pte_free_tlb(tlb, ptep, addr)   __pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr)   pmd_free((tlb)->mm, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr)   __pmd_free_tlb(tlb, pmdp, addr)
+#define pud_free_tlb(tlb, pudp, addr)   pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)          do { } while (0)
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index b145f16c91bc..3a456c6c7005 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -36,12 +36,11 @@
 #ifdef CONFIG_MULTI_IRQ_HANDLER
         ldr     r1, =handle_arch_irq
         mov     r0, sp
-        ldr     r1, [r1]
         adr     lr, BSYM(9997f)
-        teq     r1, #0
-        movne   pc, r1
-#endif
+        ldr     pc, [r1]
+#else
         arch_irq_handler_default
+#endif
 9997:
         .endm
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 08c82fd844a8..14e277d2ff91 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -39,8 +39,14 @@
 #error KERNEL_RAM_VADDR must start at 0xXXXX8000
 #endif
 
+#ifdef CONFIG_ARM_LPAE
+        /* LPAE requires an additional page for the PGD */
+#define PG_DIR_SIZE     0x5000
+#define PMD_ORDER       3
+#else
 #define PG_DIR_SIZE     0x4000
 #define PMD_ORDER       2
+#endif
 
         .globl  swapper_pg_dir
         .equ    swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
@@ -164,17 +170,36 @@ __create_page_tables:
         teq     r0, r6
         bne     1b
 
+#ifdef CONFIG_ARM_LPAE
+        /*
+         * Build the PGD table (first level) to point to the PMD table. A PGD
+         * entry is 64-bit wide.
+         */
+        mov     r0, r4
+        add     r3, r4, #0x1000                 @ first PMD table address
+        orr     r3, r3, #3                      @ PGD block type
+        mov     r6, #4                          @ PTRS_PER_PGD
+        mov     r7, #1 << (55 - 32)             @ L_PGD_SWAPPER
+1:      str     r3, [r0], #4                    @ set bottom PGD entry bits
+        str     r7, [r0], #4                    @ set top PGD entry bits
+        add     r3, r3, #0x1000                 @ next PMD table
+        subs    r6, r6, #1
+        bne     1b
+
+        add     r4, r4, #0x1000                 @ point to the PMD tables
+#endif
+
         ldr     r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
         /*
          * Create identity mapping to cater for __enable_mmu.
          * This identity mapping will be removed by paging_init().
          */
-        adr     r0, __enable_mmu_loc
+        adr     r0, __turn_mmu_on_loc
         ldmia   r0, {r3, r5, r6}
         sub     r0, r0, r3                      @ virt->phys offset
-        add     r5, r5, r0                      @ phys __enable_mmu
-        add     r6, r6, r0                      @ phys __enable_mmu_end
+        add     r5, r5, r0                      @ phys __turn_mmu_on
+        add     r6, r6, r0                      @ phys __turn_mmu_on_end
         mov     r5, r5, lsr #SECTION_SHIFT
         mov     r6, r6, lsr #SECTION_SHIFT
 
@@ -219,8 +244,8 @@ __create_page_tables:
 #endif
 
         /*
-         * Then map boot params address in r2 or
-         * the first 1MB of ram if boot params address is not specified.
+         * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
+         * of ram if boot params address is not specified.
          */
         mov     r0, r2, lsr #SECTION_SHIFT
         movs    r0, r0, lsl #SECTION_SHIFT
@@ -251,7 +276,15 @@ __create_page_tables:
         mov     r3, r7, lsr #SECTION_SHIFT
         ldr     r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
         orr     r3, r7, r3, lsl #SECTION_SHIFT
+#ifdef CONFIG_ARM_LPAE
+        mov     r7, #1 << (54 - 32)             @ XN
+#else
+        orr     r3, r3, #PMD_SECT_XN
+#endif
 1:      str     r3, [r0], #4
+#ifdef CONFIG_ARM_LPAE
+        str     r7, [r0], #4
+#endif
         add     r3, r3, #1 << SECTION_SHIFT
         cmp     r0, r6
         blo     1b
@@ -283,14 +316,17 @@ __create_page_tables:
         str     r3, [r0]
 #endif
 #endif
+#ifdef CONFIG_ARM_LPAE
+        sub     r4, r4, #0x1000         @ point to the PGD table
+#endif
         mov     pc, lr
 ENDPROC(__create_page_tables)
         .ltorg
         .align
-__enable_mmu_loc:
+__turn_mmu_on_loc:
         .long   .
-        .long   __enable_mmu
-        .long   __enable_mmu_end
+        .long   __turn_mmu_on
+        .long   __turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
         __CPUINIT
@@ -374,12 +410,17 @@ __enable_mmu:
 #ifdef CONFIG_CPU_ICACHE_DISABLE
         bic     r0, r0, #CR_I
 #endif
+#ifdef CONFIG_ARM_LPAE
+        mov     r5, #0
+        mcrr    p15, 0, r4, r5, c2              @ load TTBR0
+#else
         mov     r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
                       domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
                       domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
                       domain_val(DOMAIN_IO, DOMAIN_CLIENT))
         mcr     p15, 0, r5, c3, c0, 0           @ load domain access register
         mcr     p15, 0, r4, c2, c0, 0           @ load page table pointer
+#endif
         b       __turn_mmu_on
 ENDPROC(__enable_mmu)
 
@@ -398,15 +439,19 @@ ENDPROC(__enable_mmu)
  * other registers depend on the function called upon completion
  */
         .align  5
-__turn_mmu_on:
+        .pushsection    .idmap.text, "ax"
+ENTRY(__turn_mmu_on)
         mov     r0, r0
+        instr_sync
         mcr     p15, 0, r0, c1, c0, 0           @ write control reg
         mrc     p15, 0, r3, c0, c0, 0           @ read id reg
+        instr_sync
         mov     r3, r3
         mov     r3, r13
         mov     pc, r3
-__enable_mmu_end:
+__turn_mmu_on_end:
 ENDPROC(__turn_mmu_on)
+        .popsection
 
 
 #ifdef CONFIG_SMP_ON_UP
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 814a52a9dc39..d6a95ef9131d 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -1016,10 +1016,10 @@ static int __init arch_hw_breakpoint_init(void)
         }
 
         /* Register debug fault handler. */
-        hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
-                        "watchpoint debug exception");
-        hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
-                        "breakpoint debug exception");
+        hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+                        TRAP_HWBKPT, "watchpoint debug exception");
+        hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+                        TRAP_HWBKPT, "breakpoint debug exception");
 
         /* Register hotplug notifier. */
         register_cpu_notifier(&dbg_reset_nb);
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 29620b632ed9..764bd456d84f 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -12,12 +12,11 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
+#include <asm/system.h>
 
 extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
 
-extern void setup_mm_for_reboot(void);
-
 extern unsigned long kexec_start_address;
 extern unsigned long kexec_indirection_page;
 extern unsigned long kexec_mach_type;
@@ -111,14 +110,6 @@ void machine_kexec(struct kimage *image)
 
         if (kexec_reinit)
                 kexec_reinit();
-        local_irq_disable();
-        local_fiq_disable();
-        setup_mm_for_reboot();
-        flush_cache_all();
-        outer_flush_all();
-        outer_disable();
-        cpu_proc_fin();
-        outer_inv_all();
-        flush_cache_all();
-        cpu_reset(reboot_code_buffer_phys);
+
+        soft_restart(reboot_code_buffer_phys);
 }
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 88b0941ce51e..5bb91bf3d47f 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -59,8 +59,7 @@ armpmu_get_pmu_id(void)
 }
 EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
 
-int
-armpmu_get_max_events(void)
+int perf_num_counters(void)
 {
         int max_events = 0;
 
@@ -69,12 +68,6 @@ armpmu_get_max_events(void)
 
         return max_events;
 }
-EXPORT_SYMBOL_GPL(armpmu_get_max_events);
-
-int perf_num_counters(void)
-{
-        return armpmu_get_max_events();
-}
 EXPORT_SYMBOL_GPL(perf_num_counters);
 
 #define HW_OP_UNSUPPORTED               0xFFFF
@@ -380,6 +373,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 {
         int i, irq, irqs;
         struct platform_device *pmu_device = armpmu->plat_device;
+        struct arm_pmu_platdata *plat =
+                dev_get_platdata(&pmu_device->dev);
 
         irqs = min(pmu_device->num_resources, num_possible_cpus());
 
@@ -387,8 +382,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
                 if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
                         continue;
                 irq = platform_get_irq(pmu_device, i);
-                if (irq >= 0)
+                if (irq >= 0) {
+                        if (plat && plat->disable_irq)
+                                plat->disable_irq(irq);
                         free_irq(irq, armpmu);
+                }
         }
 
         release_pmu(armpmu->type);
@@ -448,7 +446,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
                                 irq);
                         armpmu_release_hardware(armpmu);
                         return err;
-                }
+                } else if (plat && plat->enable_irq)
+                        plat->enable_irq(irq);
 
                 cpumask_set_cpu(i, &armpmu->active_irqs);
         }
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index e63d8115c01b..533be9930ec2 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -65,13 +65,15 @@ enum armv6_counters {
  * accesses/misses in hardware.
  */
 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6_PERFCTR_CPU_CYCLES,
-        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6_PERFCTR_INSTR_EXEC,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6_PERFCTR_BR_MISPREDICT,
-        [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CPU_CYCLES]              = ARMV6_PERFCTR_CPU_CYCLES,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV6_PERFCTR_INSTR_EXEC,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CACHE_MISSES]            = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV6_PERFCTR_BR_EXEC,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV6_PERFCTR_BR_MISPREDICT,
+        [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = ARMV6_PERFCTR_LSU_FULL_STALL,
 };
 
 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -218,13 +220,15 @@ enum armv6mpcore_perf_types {
  * accesses/misses in hardware.
  */
 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-        [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CPU_CYCLES]              = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CACHE_MISSES]            = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV6MPCORE_PERFCTR_BR_EXEC,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+        [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
 };
 
 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 1ef6d0034b85..460bbbb6b885 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -28,165 +28,87 @@ static struct arm_pmu armv7pmu;
  * they are not available.
  */
 enum armv7_perf_types {
-        ARMV7_PERFCTR_PMNC_SW_INCR              = 0x00,
-        ARMV7_PERFCTR_IFETCH_MISS               = 0x01,
-        ARMV7_PERFCTR_ITLB_MISS                 = 0x02,
-        ARMV7_PERFCTR_DCACHE_REFILL             = 0x03, /* L1 */
-        ARMV7_PERFCTR_DCACHE_ACCESS             = 0x04, /* L1 */
-        ARMV7_PERFCTR_DTLB_REFILL               = 0x05,
-        ARMV7_PERFCTR_DREAD                     = 0x06,
-        ARMV7_PERFCTR_DWRITE                    = 0x07,
-        ARMV7_PERFCTR_INSTR_EXECUTED            = 0x08,
-        ARMV7_PERFCTR_EXC_TAKEN                 = 0x09,
-        ARMV7_PERFCTR_EXC_EXECUTED              = 0x0A,
-        ARMV7_PERFCTR_CID_WRITE                 = 0x0B,
-        /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+        ARMV7_PERFCTR_PMNC_SW_INCR                      = 0x00,
+        ARMV7_PERFCTR_L1_ICACHE_REFILL                  = 0x01,
+        ARMV7_PERFCTR_ITLB_REFILL                       = 0x02,
+        ARMV7_PERFCTR_L1_DCACHE_REFILL                  = 0x03,
+        ARMV7_PERFCTR_L1_DCACHE_ACCESS                  = 0x04,
+        ARMV7_PERFCTR_DTLB_REFILL                       = 0x05,
+        ARMV7_PERFCTR_MEM_READ                          = 0x06,
+        ARMV7_PERFCTR_MEM_WRITE                         = 0x07,
+        ARMV7_PERFCTR_INSTR_EXECUTED                    = 0x08,
+        ARMV7_PERFCTR_EXC_TAKEN                         = 0x09,
+        ARMV7_PERFCTR_EXC_EXECUTED                      = 0x0A,
+        ARMV7_PERFCTR_CID_WRITE                         = 0x0B,
+
+        /*
+         * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
          * It counts:
-         *  - all branch instructions,
+         *  - all (taken) branch instructions,
          *  - instructions that explicitly write the PC,
          *  - exception generating instructions.
          */
-        ARMV7_PERFCTR_PC_WRITE                  = 0x0C,
-        ARMV7_PERFCTR_PC_IMM_BRANCH             = 0x0D,
-        ARMV7_PERFCTR_PC_PROC_RETURN            = 0x0E,
-        ARMV7_PERFCTR_UNALIGNED_ACCESS          = 0x0F,
+        ARMV7_PERFCTR_PC_WRITE                          = 0x0C,
+        ARMV7_PERFCTR_PC_IMM_BRANCH                     = 0x0D,
+        ARMV7_PERFCTR_PC_PROC_RETURN                    = 0x0E,
+        ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS              = 0x0F,
+        ARMV7_PERFCTR_PC_BRANCH_MIS_PRED                = 0x10,
+        ARMV7_PERFCTR_CLOCK_CYCLES                      = 0x11,
+        ARMV7_PERFCTR_PC_BRANCH_PRED                    = 0x12,
 
         /* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
-        ARMV7_PERFCTR_PC_BRANCH_MIS_PRED        = 0x10,
-        ARMV7_PERFCTR_CLOCK_CYCLES              = 0x11,
-        ARMV7_PERFCTR_PC_BRANCH_PRED            = 0x12,
-        ARMV7_PERFCTR_MEM_ACCESS                = 0x13,
-        ARMV7_PERFCTR_L1_ICACHE_ACCESS          = 0x14,
-        ARMV7_PERFCTR_L1_DCACHE_WB              = 0x15,
-        ARMV7_PERFCTR_L2_DCACHE_ACCESS          = 0x16,
-        ARMV7_PERFCTR_L2_DCACHE_REFILL          = 0x17,
-        ARMV7_PERFCTR_L2_DCACHE_WB              = 0x18,
-        ARMV7_PERFCTR_BUS_ACCESS                = 0x19,
-        ARMV7_PERFCTR_MEMORY_ERROR              = 0x1A,
-        ARMV7_PERFCTR_INSTR_SPEC                = 0x1B,
-        ARMV7_PERFCTR_TTBR_WRITE                = 0x1C,
-        ARMV7_PERFCTR_BUS_CYCLES                = 0x1D,
-
-        ARMV7_PERFCTR_CPU_CYCLES                = 0xFF
+        ARMV7_PERFCTR_MEM_ACCESS                        = 0x13,
+        ARMV7_PERFCTR_L1_ICACHE_ACCESS                  = 0x14,
+        ARMV7_PERFCTR_L1_DCACHE_WB                      = 0x15,
+        ARMV7_PERFCTR_L2_CACHE_ACCESS                   = 0x16,
+        ARMV7_PERFCTR_L2_CACHE_REFILL                   = 0x17,
+        ARMV7_PERFCTR_L2_CACHE_WB                       = 0x18,
+        ARMV7_PERFCTR_BUS_ACCESS                        = 0x19,
+        ARMV7_PERFCTR_MEM_ERROR                         = 0x1A,
+        ARMV7_PERFCTR_INSTR_SPEC                        = 0x1B,
+        ARMV7_PERFCTR_TTBR_WRITE                        = 0x1C,
+        ARMV7_PERFCTR_BUS_CYCLES                        = 0x1D,
+
+        ARMV7_PERFCTR_CPU_CYCLES                        = 0xFF
 };
 
 /* ARMv7 Cortex-A8 specific event types */
 enum armv7_a8_perf_types {
-        ARMV7_PERFCTR_WRITE_BUFFER_FULL         = 0x40,
-        ARMV7_PERFCTR_L2_STORE_MERGED           = 0x41,
-        ARMV7_PERFCTR_L2_STORE_BUFF             = 0x42,
-        ARMV7_PERFCTR_L2_ACCESS                 = 0x43,
-        ARMV7_PERFCTR_L2_CACH_MISS              = 0x44,
-        ARMV7_PERFCTR_AXI_READ_CYCLES           = 0x45,
-        ARMV7_PERFCTR_AXI_WRITE_CYCLES          = 0x46,
-        ARMV7_PERFCTR_MEMORY_REPLAY             = 0x47,
-        ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY   = 0x48,
-        ARMV7_PERFCTR_L1_DATA_MISS              = 0x49,
-        ARMV7_PERFCTR_L1_INST_MISS              = 0x4A,
-        ARMV7_PERFCTR_L1_DATA_COLORING          = 0x4B,
-        ARMV7_PERFCTR_L1_NEON_DATA              = 0x4C,
-        ARMV7_PERFCTR_L1_NEON_CACH_DATA         = 0x4D,
-        ARMV7_PERFCTR_L2_NEON                   = 0x4E,
-        ARMV7_PERFCTR_L2_NEON_HIT               = 0x4F,
-        ARMV7_PERFCTR_L1_INST                   = 0x50,
-        ARMV7_PERFCTR_PC_RETURN_MIS_PRED        = 0x51,
-        ARMV7_PERFCTR_PC_BRANCH_FAILED          = 0x52,
-        ARMV7_PERFCTR_PC_BRANCH_TAKEN           = 0x53,
-        ARMV7_PERFCTR_PC_BRANCH_EXECUTED        = 0x54,
-        ARMV7_PERFCTR_OP_EXECUTED               = 0x55,
-        ARMV7_PERFCTR_CYCLES_INST_STALL         = 0x56,
-        ARMV7_PERFCTR_CYCLES_INST               = 0x57,
-        ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL    = 0x58,
-        ARMV7_PERFCTR_CYCLES_NEON_INST_STALL    = 0x59,
-        ARMV7_PERFCTR_NEON_CYCLES               = 0x5A,
-
-        ARMV7_PERFCTR_PMU0_EVENTS               = 0x70,
-        ARMV7_PERFCTR_PMU1_EVENTS               = 0x71,
-        ARMV7_PERFCTR_PMU_EVENTS                = 0x72,
+        ARMV7_A8_PERFCTR_L2_CACHE_ACCESS                = 0x43,
+        ARMV7_A8_PERFCTR_L2_CACHE_REFILL                = 0x44,
+        ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS               = 0x50,
+        ARMV7_A8_PERFCTR_STALL_ISIDE                    = 0x56,
 };
 
 /* ARMv7 Cortex-A9 specific event types */
 enum armv7_a9_perf_types {
-        ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC     = 0x40,
-        ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC     = 0x41,
-        ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC       = 0x42,
-
-        ARMV7_PERFCTR_COHERENT_LINE_MISS        = 0x50,
-        ARMV7_PERFCTR_COHERENT_LINE_HIT         = 0x51,
-
-        ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES   = 0x60,
-        ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES   = 0x61,
-        ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
-        ARMV7_PERFCTR_STREX_EXECUTED_PASSED     = 0x63,
-        ARMV7_PERFCTR_STREX_EXECUTED_FAILED     = 0x64,
-        ARMV7_PERFCTR_DATA_EVICTION             = 0x65,
-        ARMV7_PERFCTR_ISSUE_STAGE_NO_INST       = 0x66,
-        ARMV7_PERFCTR_ISSUE_STAGE_EMPTY         = 0x67,
-        ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE  = 0x68,
-
-        ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
-
-        ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST   = 0x70,
-        ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
-        ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST  = 0x72,
-        ARMV7_PERFCTR_FP_EXECUTED_INST          = 0x73,
-        ARMV7_PERFCTR_NEON_EXECUTED_INST        = 0x74,
-
-        ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
-        ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES  = 0x81,
-        ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES        = 0x82,
-        ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES        = 0x83,
-        ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES  = 0x84,
-        ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES  = 0x85,
-        ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES      = 0x86,
-
-        ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES  = 0x8A,
-        ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
-
-        ARMV7_PERFCTR_ISB_INST                  = 0x90,
-        ARMV7_PERFCTR_DSB_INST                  = 0x91,
-        ARMV7_PERFCTR_DMB_INST                  = 0x92,
-        ARMV7_PERFCTR_EXT_INTERRUPTS            = 0x93,
-
-        ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED     = 0xA0,
-        ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED       = 0xA1,
-        ARMV7_PERFCTR_PLE_FIFO_FLUSH            = 0xA2,
-        ARMV7_PERFCTR_PLE_RQST_COMPLETED        = 0xA3,
-        ARMV7_PERFCTR_PLE_FIFO_OVERFLOW         = 0xA4,
-        ARMV7_PERFCTR_PLE_RQST_PROG             = 0xA5
+        ARMV7_A9_PERFCTR_INSTR_CORE_RENAME              = 0x68,
+        ARMV7_A9_PERFCTR_STALL_ICACHE                   = 0x60,
+        ARMV7_A9_PERFCTR_STALL_DISPATCH                 = 0x66,
 };
 
 /* ARMv7 Cortex-A5 specific event types */
 enum armv7_a5_perf_types {
-        ARMV7_PERFCTR_IRQ_TAKEN                 = 0x86,
-        ARMV7_PERFCTR_FIQ_TAKEN                 = 0x87,
-
-        ARMV7_PERFCTR_EXT_MEM_RQST              = 0xc0,
-        ARMV7_PERFCTR_NC_EXT_MEM_RQST           = 0xc1,
-        ARMV7_PERFCTR_PREFETCH_LINEFILL         = 0xc2,
-        ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP    = 0xc3,
-        ARMV7_PERFCTR_ENTER_READ_ALLOC          = 0xc4,
-        ARMV7_PERFCTR_READ_ALLOC                = 0xc5,
-
-        ARMV7_PERFCTR_STALL_SB_FULL             = 0xc9,
+        ARMV7_A5_PERFCTR_PREFETCH_LINEFILL              = 0xc2,
+        ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP         = 0xc3,
 };
 
 /* ARMv7 Cortex-A15 specific event types */
 enum armv7_a15_perf_types {
-        ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS     = 0x40,
-        ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS    = 0x41,
-        ARMV7_PERFCTR_L1_DCACHE_READ_REFILL     = 0x42,
-        ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL    = 0x43,
+        ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ         = 0x40,
+        ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE        = 0x41,
+        ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ         = 0x42,
+        ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE        = 0x43,
 
-        ARMV7_PERFCTR_L1_DTLB_READ_REFILL       = 0x4C,
-        ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL      = 0x4D,
+        ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ           = 0x4C,
+        ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE          = 0x4D,
 
-        ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS     = 0x50,
-        ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS    = 0x51,
-        ARMV7_PERFCTR_L2_DCACHE_READ_REFILL     = 0x52,
-        ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL    = 0x53,
+        ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ          = 0x50,
+        ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE         = 0x51,
+        ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ          = 0x52,
+        ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE         = 0x53,
 
-        ARMV7_PERFCTR_SPEC_PC_WRITE             = 0x76,
+        ARMV7_A15_PERFCTR_PC_WRITE_SPEC                 = 0x76,
 };
 
 /*
@@ -197,13 +119,15 @@ enum armv7_a15_perf_types {
  * accesses/misses in hardware.
  */
 static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV7_PERFCTR_CPU_CYCLES,
-        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV7_PERFCTR_INSTR_EXECUTED,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-        [PERF_COUNT_HW_BUS_CYCLES]          = ARMV7_PERFCTR_CLOCK_CYCLES,
+        [PERF_COUNT_HW_CPU_CYCLES]              = ARMV7_PERFCTR_CPU_CYCLES,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV7_PERFCTR_INSTR_EXECUTED,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+        [PERF_COUNT_HW_CACHE_MISSES]            = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV7_PERFCTR_PC_WRITE,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+        [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = HW_OP_UNSUPPORTED,
 };
 
 static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -217,12 +141,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                  * combined.
                  */
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_DCACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_DCACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -231,12 +155,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         },
         [C(L1I)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_INST,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_INST_MISS,
+                        [C(RESULT_ACCESS)]      = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_INST,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_INST_MISS,
+                        [C(RESULT_ACCESS)]      = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -245,12 +169,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         },
         [C(LL)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L2_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L2_CACH_MISS,
+                        [C(RESULT_ACCESS)]      = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L2_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L2_CACH_MISS,
+                        [C(RESULT_ACCESS)]      = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -274,11 +198,11 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(ITLB)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -287,14 +211,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         },
         [C(BPU)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -321,14 +243,15 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Cortex-A9 HW events mapping
  */
 static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV7_PERFCTR_CPU_CYCLES,
-        [PERF_COUNT_HW_INSTRUCTIONS]        =
-                                        ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_DCACHE_ACCESS,
-        [PERF_COUNT_HW_CACHE_MISSES]        = ARMV7_PERFCTR_DCACHE_REFILL,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-        [PERF_COUNT_HW_BUS_CYCLES]          = ARMV7_PERFCTR_CLOCK_CYCLES,
+        [PERF_COUNT_HW_CPU_CYCLES]              = ARMV7_PERFCTR_CPU_CYCLES,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+        [PERF_COUNT_HW_CACHE_MISSES]            = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV7_PERFCTR_PC_WRITE,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+        [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = ARMV7_A9_PERFCTR_STALL_DISPATCH,
 };
 
 static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -342,12 +265,12 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                  * combined.
                  */
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_DCACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_DCACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -357,11 +280,11 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(L1I)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -399,11 +322,11 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(ITLB)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -412,14 +335,12 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         },
         [C(BPU)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -446,13 +367,15 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Cortex-A5 HW events mapping
  */
 static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV7_PERFCTR_CPU_CYCLES,
-        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV7_PERFCTR_INSTR_EXECUTED,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-        [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CPU_CYCLES]              = ARMV7_PERFCTR_CPU_CYCLES,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV7_PERFCTR_INSTR_EXECUTED,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+        [PERF_COUNT_HW_CACHE_MISSES]            = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV7_PERFCTR_PC_WRITE,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+        [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = HW_OP_UNSUPPORTED,
 };
 
 static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -460,42 +383,34 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                                         [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
         [C(L1D)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_DCACHE_ACCESS,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_DCACHE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_DCACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_DCACHE_ACCESS,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_DCACHE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_DCACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_PREFETCH_LINEFILL,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+                        [C(RESULT_ACCESS)]      = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+                        [C(RESULT_MISS)]        = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
                 },
         },
         [C(L1I)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 /*
                  * The prefetch counters don't differentiate between the I
                  * side and the D side.
                  */
                 [C(OP_PREFETCH)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_PREFETCH_LINEFILL,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+                        [C(RESULT_ACCESS)]      = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+                        [C(RESULT_MISS)]        = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
                 },
         },
         [C(LL)] = {
@@ -529,11 +444,11 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(ITLB)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -543,13 +458,11 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(BPU)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -562,13 +475,15 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Cortex-A15 HW events mapping
  */
 static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV7_PERFCTR_CPU_CYCLES,
-        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV7_PERFCTR_INSTR_EXECUTED,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-        [PERF_COUNT_HW_BUS_CYCLES]          = ARMV7_PERFCTR_BUS_CYCLES,
+        [PERF_COUNT_HW_CPU_CYCLES]              = ARMV7_PERFCTR_CPU_CYCLES,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV7_PERFCTR_INSTR_EXECUTED,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+        [PERF_COUNT_HW_CACHE_MISSES]            = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV7_A15_PERFCTR_PC_WRITE_SPEC,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+        [PERF_COUNT_HW_BUS_CYCLES]              = ARMV7_PERFCTR_BUS_CYCLES,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = HW_OP_UNSUPPORTED,
 };
 
 static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -576,16 +491,12 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                                         [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
         [C(L1D)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_L1_DCACHE_READ_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ,
+                        [C(RESULT_MISS)]        = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE,
+                        [C(RESULT_MISS)]        = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -601,11 +512,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                  */
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_ICACHE_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -614,16 +525,12 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         },
         [C(LL)] = {
                 [C(OP_READ)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_L2_DCACHE_READ_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ,
+                        [C(RESULT_MISS)]        = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ,
                 },
                 [C(OP_WRITE)] = {
-                        [C(RESULT_ACCESS)]
-                                        = ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL,
+                        [C(RESULT_ACCESS)]      = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE,
+                        [C(RESULT_MISS)]        = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -633,13 +540,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(DTLB)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_L1_DTLB_READ_REFILL,
+                        [C(RESULT_MISS)]        = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL,
+                        [C(RESULT_MISS)]        = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -649,11 +554,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(ITLB)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
-                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_REFILL,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
@@ -663,13 +568,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
         [C(BPU)] = {
                 [C(OP_READ)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_WRITE)] = {
                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_BRANCH_PRED,
-                        [C(RESULT_MISS)]
-                                        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+                        [C(RESULT_MISS)]        = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
                 },
                 [C(OP_PREFETCH)] = {
                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index e0cca10a8411..3b99d8269829 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -48,13 +48,15 @@ enum xscale_counters {
 };
 
 static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-        [PERF_COUNT_HW_CPU_CYCLES]          = XSCALE_PERFCTR_CCNT,
-        [PERF_COUNT_HW_INSTRUCTIONS]        = XSCALE_PERFCTR_INSTRUCTION,
-        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
-        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
-        [PERF_COUNT_HW_BRANCH_MISSES]       = XSCALE_PERFCTR_BRANCH_MISS,
-        [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CPU_CYCLES]              = XSCALE_PERFCTR_CCNT,
+        [PERF_COUNT_HW_INSTRUCTIONS]            = XSCALE_PERFCTR_INSTRUCTION,
+        [PERF_COUNT_HW_CACHE_REFERENCES]        = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_CACHE_MISSES]            = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = XSCALE_PERFCTR_BRANCH,
+        [PERF_COUNT_HW_BRANCH_MISSES]           = XSCALE_PERFCTR_BRANCH_MISS,
+        [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
+        [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER,
+        [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = HW_OP_UNSUPPORTED,
 };
 
 static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 17859ce4e7be..b29776aa6586 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -92,17 +92,23 @@ static int __init hlt_setup(char *__unused)
 __setup("nohlt", nohlt_setup);
 __setup("hlt", hlt_setup);
 
-void soft_restart(unsigned long addr)
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+typedef void (*phys_reset_t)(unsigned long);
+
+/*
+ * A temporary stack to use for CPU reset. This is static so that we
+ * don't clobber it with the identity mapping. When running with this
+ * stack, any references to the current task *will not work* so you
+ * should really do as little as possible before jumping to your reset
+ * code.
+ */
+static u64 soft_restart_stack[16];
+
+static void __soft_restart(void *addr)
 {
-        /* Disable interrupts first */
-        local_irq_disable();
-        local_fiq_disable();
+        phys_reset_t phys_reset;
 
-        /*
-         * Tell the mm system that we are going to reboot -
-         * we may need it to insert some 1:1 mappings so that
-         * soft boot works.
-         */
+        /* Take out a flat memory mapping. */
         setup_mm_for_reboot();
 
         /* Clean and invalidate caches */
@@ -114,7 +120,31 @@ void soft_restart(unsigned long addr)
         /* Push out any further dirty data, and ensure cache is empty */
         flush_cache_all();
 
-        cpu_reset(addr);
+        /* Switch to the identity mapping. */
+        phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+        phys_reset((unsigned long)addr);
+
+        /* Should never get here. */
+        BUG();
+}
+
+void soft_restart(unsigned long addr)
+{
+        u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
+
+        /* Disable interrupts first */
+        local_irq_disable();
+        local_fiq_disable();
+
+        /* Disable the L2 if we're the last man standing. */
+        if (num_online_cpus() == 1)
+                outer_disable();
+
+        /* Change to the new stack and continue with the reset. */
+        call_with_stack(__soft_restart, (void *)addr, (void *)stack);
+
+        /* Should never get here. */
+        BUG();
 }
 
 static void null_restart(char mode, const char *cmd)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8b13930cdb0a..095d6611c84e 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -31,6 +31,7 @@
 #include <linux/memblock.h>
 #include <linux/bug.h>
 #include <linux/compiler.h>
+#include <linux/sort.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -890,6 +891,12 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
         return mdesc;
 }
 
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+        const struct membank *a = _a, *b = _b;
+        long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+        return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
 
 void __init setup_arch(char **cmdline_p)
 {
@@ -922,6 +929,7 @@ void __init setup_arch(char **cmdline_p)
 
         parse_early_param();
 
+        sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
         sanity_check_meminfo();
         arm_memblock_init(&meminfo, mdesc);
 
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 020e99c845e7..1f268bda4552 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -54,14 +54,18 @@ ENDPROC(cpu_suspend_abort)
  * r0 = control register value
  */
         .align  5
+        .pushsection    .idmap.text,"ax"
 ENTRY(cpu_resume_mmu)
         ldr     r3, =cpu_resume_after_mmu
+        instr_sync
         mcr     p15, 0, r0, c1, c0, 0   @ turn on MMU, I-cache, etc
         mrc     p15, 0, r0, c0, c0, 0   @ read id reg
+        instr_sync
         mov     r0, r0
         mov     r0, r0
         mov     pc, r3                  @ jump to virtual address
 ENDPROC(cpu_resume_mmu)
+        .popsection
 cpu_resume_after_mmu:
         bl      cpu_init                @ restore the und/abt/irq banked regs
         mov     r0, #0                  @ return zero on success
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ef5640b9e218..57db122a4f62 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -31,6 +31,7 @@
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/exception.h>
+#include <asm/idmap.h>
 #include <asm/topology.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
@@ -61,7 +62,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 {
         struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
         struct task_struct *idle = ci->idle;
-        pgd_t *pgd;
         int ret;
 
         /*
@@ -84,29 +84,11 @@ int __cpuinit __cpu_up(unsigned int cpu)
         }
 
         /*
-         * Allocate initial page tables to allow the new CPU to
-         * enable the MMU safely.  This essentially means a set
-         * of our "standard" page tables, with the addition of
-         * a 1:1 mapping for the physical address of the kernel.
-         */
-        pgd = pgd_alloc(&init_mm);
-        if (!pgd)
-                return -ENOMEM;
-
-        if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
-                identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
-                identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
-                identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
-        }
-
-        /*
          * We need to tell the secondary core where to find
          * its stack and the page tables.
          */
         secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
-        secondary_data.pgdir = virt_to_phys(pgd);
+        secondary_data.pgdir = virt_to_phys(idmap_pgd);
         secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
         __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
         outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
@@ -142,16 +124,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
         secondary_data.stack = NULL;
         secondary_data.pgdir = 0;
 
-        if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
-                identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
-                identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
-                identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
-        }
-
-        pgd_free(&init_mm, pgd);
-
         return ret;
 }
 
@@ -550,6 +522,10 @@ static void ipi_cpu_stop(unsigned int cpu)
         local_fiq_disable();
         local_irq_disable();
 
+#ifdef CONFIG_HOTPLUG_CPU
+        platform_cpu_kill(cpu);
+#endif
+
         while (1)
                 cpu_relax();
 }
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 93a22d282c16..1794cc3b0f18 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -1,13 +1,12 @@
 #include <linux/init.h>
 
+#include <asm/idmap.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/memory.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 
-static pgd_t *suspend_pgd;
-
 extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
 extern void cpu_resume_mmu(void);
 
@@ -21,7 +20,7 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
         *save_ptr = virt_to_phys(ptr);
 
         /* This must correspond to the LDM in cpu_resume() assembly */
-        *ptr++ = virt_to_phys(suspend_pgd);
+        *ptr++ = virt_to_phys(idmap_pgd);
         *ptr++ = sp;
         *ptr++ = virt_to_phys(cpu_do_resume);
 
@@ -42,7 +41,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
         struct mm_struct *mm = current->active_mm;
         int ret;
 
-        if (!suspend_pgd)
+        if (!idmap_pgd)
                 return -EINVAL;
 
         /*
@@ -59,14 +58,3 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 
         return ret;
 }
-
-static int __init cpu_suspend_init(void)
-{
-        suspend_pgd = pgd_alloc(&init_mm);
-        if (suspend_pgd) {
-                unsigned long addr = virt_to_phys(cpu_resume_mmu);
-                identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
-        }
-        return suspend_pgd ? 0 : -ENOMEM;
-}
-core_initcall(cpu_suspend_init);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 20b3041e0860..f76e75548670 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -13,6 +13,12 @@
         *(.proc.info.init)                                              \
         VMLINUX_SYMBOL(__proc_info_end) = .;
 
+#define IDMAP_TEXT                                                      \
+        ALIGN_FUNCTION();                                               \
+        VMLINUX_SYMBOL(__idmap_text_start) = .;                         \
+        *(.idmap.text)                                                  \
+        VMLINUX_SYMBOL(__idmap_text_end) = .;
+
 #ifdef CONFIG_HOTPLUG_CPU
 #define ARM_CPU_DISCARD(x)
 #define ARM_CPU_KEEP(x)         x
@@ -92,6 +98,7 @@ SECTIONS
                         SCHED_TEXT
                         LOCK_TEXT
                         KPROBES_TEXT
+                        IDMAP_TEXT
 #ifdef CONFIG_MMU
                         *(.fixup)
 #endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index cf73a7f742dd..0ade0acc1ed9 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -13,7 +13,8 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
                    testchangebit.o testclearbit.o testsetbit.o        \
                    ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
                    ucmpdi2.o lib1funcs.o div64.o                      \
-                   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
+                   io-readsb.o io-writesb.o io-readsl.o io-writesl.o  \
+                   call_with_stack.o
 
 mmu-y   := clear_user.o copy_page.o getuser.o putuser.o
 
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
new file mode 100644
index 000000000000..916c80f13ae7
--- /dev/null
+++ b/arch/arm/lib/call_with_stack.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/lib/call_with_stack.S
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Written by Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
+ *
+ * Change the stack to that pointed at by sp, then invoke fn(arg) with
+ * the new stack.
+ */
+ENTRY(call_with_stack)
+        str     sp, [r2, #-4]!
+        str     lr, [r2, #-4]!
+
+        mov     sp, r2
+        mov     r2, r0
+        mov     r0, r1
+
+        adr     lr, BSYM(1f)
+        mov     pc, r2
+
+1:      ldr     lr, [sp]
+        ldr     sp, [sp, #4]
+        mov     pc, lr
+ENDPROC(call_with_stack)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d111c3e99249..4f991f295284 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -3,6 +3,12 @@ if ARCH_AT91
 config HAVE_AT91_DATAFLASH_CARD
         bool
 
+config HAVE_AT91_DBGU0
+        bool
+
+config HAVE_AT91_DBGU1
+        bool
+
 config HAVE_AT91_USART3
         bool
 
@@ -21,12 +27,14 @@ config ARCH_AT91RM9200
         bool "AT91RM9200"
         select CPU_ARM920T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
         bool "AT91SAM9260 or AT91SAM9XE"
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_AT91_USART3
         select HAVE_AT91_USART4
         select HAVE_AT91_USART5
@@ -37,11 +45,13 @@ config ARCH_AT91SAM9261
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
+        select HAVE_AT91_DBGU0
 
 config ARCH_AT91SAM9G10
         bool "AT91SAM9G10"
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
@@ -50,6 +60,7 @@ config ARCH_AT91SAM9263
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
+        select HAVE_AT91_DBGU1
 
 config ARCH_AT91SAM9RL
         bool "AT91SAM9RL"
@@ -57,11 +68,13 @@ config ARCH_AT91SAM9RL
         select GENERIC_CLOCKEVENTS
         select HAVE_AT91_USART3
         select HAVE_FB_ATMEL
+        select HAVE_AT91_DBGU0
 
 config ARCH_AT91SAM9G20
         bool "AT91SAM9G20"
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_AT91_USART3
         select HAVE_AT91_USART4
         select HAVE_AT91_USART5
@@ -74,6 +87,7 @@ config ARCH_AT91SAM9G45
         select HAVE_AT91_USART3
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
+        select HAVE_AT91_DBGU1
 
 config ARCH_AT91CAP9
         bool "AT91CAP9"
@@ -81,6 +95,7 @@ config ARCH_AT91CAP9
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
+        select HAVE_AT91_DBGU1
 
 config ARCH_AT91X40
         bool "AT91x40"
@@ -510,8 +525,13 @@ config AT91_TIMER_HZ
 choice
         prompt "Select a UART for early kernel messages"
 
-config AT91_EARLY_DBGU
-        bool "DBGU"
+config AT91_EARLY_DBGU0
+        bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
+        depends on HAVE_AT91_DBGU0
+
+config AT91_EARLY_DBGU1
+        bool "DBGU on 9263, 9g45 and cap9"
+        depends on HAVE_AT91_DBGU1
 
 config AT91_EARLY_USART0
         bool "USART0"
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 29373397d2df..edb879ac04c8 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -13,7 +13,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -23,11 +22,11 @@
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -137,7 +136,7 @@ static struct clk pwm_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91CAP9_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -210,6 +209,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
         CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
         CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@@ -221,6 +222,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioABCD_clk),
+        CLKDEV_CON_ID("pioB", &pioABCD_clk),
+        CLKDEV_CON_ID("pioC", &pioABCD_clk),
+        CLKDEV_CON_ID("pioD", &pioABCD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -293,23 +298,19 @@ void __init at91cap9_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91cap9_gpio[] = {
+static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
         {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOA,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOA,
         }, {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOB,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOB,
         }, {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOC,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOC,
         }, {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOD,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOD,
         }
 };
 
@@ -318,12 +319,6 @@ static void at91cap9_restart(char mode, const char *cmd)
         at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
-static void at91cap9_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -333,10 +328,16 @@ static void __init at91cap9_map_io(void)
         at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
 }
 
+static void __init at91cap9_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
+}
+
 static void __init at91cap9_initialize(void)
 {
         arm_pm_restart = at91cap9_restart;
-        pm_power_off = at91cap9_poweroff;
         at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
         /* Register GPIO subsystem */
@@ -394,6 +395,7 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91cap9_soc = {
         .map_io = at91cap9_map_io,
         .default_irq_priority = at91cap9_default_irq_priority,
+        .ioremap_registers = at91cap9_ioremap_registers,
         .register_clocks = at91cap9_register_clocks,
         .init = at91cap9_initialize,
 };
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index adad70db70eb..d298fb7cb210 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -76,7 +76,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -179,7 +179,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
-        if (data && data->vbus_pin > 0) {
+        if (data && gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -200,7 +200,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -227,12 +227,12 @@ static struct platform_device at91cap9_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -264,7 +264,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91cap9_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -332,13 +332,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         if (mmc_id == 0) {              /* MCI0 */
@@ -398,8 +398,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91CAP9_BASE_ECC,
+                .end    = AT91CAP9_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -425,15 +425,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -670,8 +670,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91CAP9_BASE_RTT,
+                .end    = AT91CAP9_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -694,10 +694,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91CAP9_BASE_WDT,
+                .end    = AT91CAP9_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91cap9_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -807,7 +816,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PA9, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -1021,8 +1030,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91CAP9_BASE_DBGU,
+                .end    = AT91CAP9_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 430a9fdc3dbf..99c3174e24a2 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -23,6 +23,7 @@
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 static struct map_desc at91rm9200_io_desc[] __initdata = {
         {
@@ -195,6 +196,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
+        CLKDEV_CON_ID("pioD", &pioD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -268,23 +273,19 @@ void __init at91rm9200_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91rm9200_gpio[] = {
+static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
         {
                 .id             = AT91RM9200_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91RM9200_BASE_PIOA,
         }, {
                 .id             = AT91RM9200_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91RM9200_BASE_PIOB,
         }, {
                 .id             = AT91RM9200_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91RM9200_BASE_PIOC,
         }, {
                 .id             = AT91RM9200_ID_PIOD,
-                .offset         = AT91_PIOD,
-                .clock          = &pioD_clk,
+                .regbase        = AT91RM9200_BASE_PIOD,
         }
 };
 
@@ -307,6 +308,10 @@ static void __init at91rm9200_map_io(void)
         iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
 }
 
+static void __init at91rm9200_ioremap_registers(void)
+{
+}
+
 static void __init at91rm9200_initialize(void)
 {
         arm_pm_restart = at91rm9200_restart;
@@ -366,6 +371,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91rm9200_soc = {
         .map_io = at91rm9200_map_io,
         .default_irq_priority = at91rm9200_default_irq_priority,
+        .ioremap_registers = at91rm9200_ioremap_registers,
         .register_clocks = at91rm9200_register_clocks,
         .init = at91rm9200_initialize,
 };
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index ad930688358c..18bacec2b094 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -114,11 +114,11 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
-        if (data->pullup_pin)
+        if (gpio_is_valid(data->pullup_pin))
                 at91_set_gpio_output(data->pullup_pin, 0);
 
         udc_data = *data;
@@ -135,7 +135,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -162,12 +162,12 @@ static struct platform_device at91rm9200_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -199,7 +199,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91rm9200_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -260,7 +260,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
         );
 
         /* input/irq */
-        if (data->irq_pin) {
+        if (gpio_is_valid(data->irq_pin)) {
                 at91_set_gpio_input(data->irq_pin, 1);
                 at91_set_deglitch(data->irq_pin, 1);
         }
@@ -268,7 +268,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
         at91_set_deglitch(data->det_pin, 1);
 
         /* outputs, initially off */
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
         at91_set_gpio_output(data->rst_pin, 0);
 
@@ -328,13 +328,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -419,15 +419,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         );
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         at91_set_A_periph(AT91_PIN_PC1, 0);             /* SMOE */
@@ -665,10 +665,24 @@ static void __init at91_add_device_tc(void) { }
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct resource rtc_resources[] = {
+        [0] = {
+                .start  = AT91RM9200_BASE_RTC,
+                .end    = AT91RM9200_BASE_RTC + SZ_256 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91_ID_SYS,
+                .end    = AT91_ID_SYS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
 static struct platform_device at91rm9200_rtc_device = {
         .name           = "at91_rtc",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = rtc_resources,
+        .num_resources  = ARRAY_SIZE(rtc_resources),
 };
 
 static void __init at91_add_device_rtc(void)
@@ -877,8 +891,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91RM9200_BASE_DBGU,
+                .end    = AT91RM9200_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 1dd69c85dfec..a028cdf8f974 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -32,6 +32,8 @@ static unsigned long last_crtr;
 static u32 irqmask;
 static struct clock_event_device clkevt;
 
+#define RM9200_TIMER_LATCH      ((AT91_SLOW_CLOCK + HZ/2) / HZ)
+
 /*
  * The ST_CRTR is updated asynchronously to the master clock ... but
  * the updates as seen by the CPU don't seem to be strictly monotonic.
@@ -74,8 +76,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
         if (sr & AT91_ST_PITS) {
                 u32     crtr = read_CRTR();
 
-                while (((crtr - last_crtr) & AT91_ST_CRTV) >= LATCH) {
-                        last_crtr += LATCH;
+                while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
+                        last_crtr += RM9200_TIMER_LATCH;
                         clkevt.event_handler(&clkevt);
                 }
                 return IRQ_HANDLED;
@@ -116,7 +118,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         case CLOCK_EVT_MODE_PERIODIC:
                 /* PIT for periodic irqs; fixed rate of 1/HZ */
                 irqmask = AT91_ST_PITS;
-                at91_sys_write(AT91_ST_PIMR, LATCH);
+                at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
                 /* ALM for oneshot irqs, set by next_event()
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index e76cd49ebc9e..5e46e4a96430 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -21,11 +20,11 @@
 #include <mach/at91sam9260.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -120,7 +119,7 @@ static struct clk ohci_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91SAM9260_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -190,6 +189,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
         CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
         CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
@@ -209,6 +210,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -270,28 +274,19 @@ void __init at91sam9260_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9260_gpio[] = {
+static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
         {
                 .id             = AT91SAM9260_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9260_BASE_PIOA,
         }, {
                 .id             = AT91SAM9260_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9260_BASE_PIOB,
         }, {
                 .id             = AT91SAM9260_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9260_BASE_PIOC,
         }
 };
 
-static void at91sam9260_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
@@ -325,10 +320,16 @@ static void __init at91sam9260_map_io(void)
         }
 }
 
+static void __init at91sam9260_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
+}
+
 static void __init at91sam9260_initialize(void)
 {
         arm_pm_restart = at91sam9_alt_restart;
-        pm_power_off = at91sam9260_poweroff;
         at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
                         | (1 << AT91SAM9260_ID_IRQ2);
 
@@ -381,6 +382,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9260_soc = {
         .map_io = at91sam9260_map_io,
         .default_irq_priority = at91sam9260_default_irq_priority,
+        .ioremap_registers = at91sam9260_ioremap_registers,
         .register_clocks = at91sam9260_register_clocks,
         .init = at91sam9260_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 629fa9774972..642ccb6d26b2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -115,7 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
@@ -136,7 +136,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -163,12 +163,12 @@ static struct platform_device at91sam9260_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -200,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -243,13 +243,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -330,11 +330,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
         for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
                 if (data->slot[i].bus_width) {
                         /* input/irq */
-                        if (data->slot[i].detect_pin) {
+                        if (gpio_is_valid(data->slot[i].detect_pin)) {
                                 at91_set_gpio_input(data->slot[i].detect_pin, 1);
                                 at91_set_deglitch(data->slot[i].detect_pin, 1);
                         }
-                        if (data->slot[i].wp_pin)
+                        if (gpio_is_valid(data->slot[i].wp_pin))
                                 at91_set_gpio_input(data->slot[i].wp_pin, 1);
 
                         switch (i) {
@@ -399,8 +399,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91SAM9260_BASE_ECC,
+                .end    = AT91SAM9260_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -426,15 +426,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -714,8 +714,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9260_BASE_RTT,
+                .end    = AT91SAM9260_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -738,10 +738,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9260_BASE_WDT,
+                .end    = AT91SAM9260_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9260_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -837,8 +846,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9260_BASE_DBGU,
+                .end    = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -1281,17 +1290,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 
         at91_sys_write(AT91_MATRIX_EBICSA, csa);
 
-        if (data->rst_pin) {
+        if (gpio_is_valid(data->rst_pin)) {
                 at91_set_multi_drive(data->rst_pin, 0);
                 at91_set_gpio_output(data->rst_pin, 1);
         }
 
-        if (data->irq_pin) {
+        if (gpio_is_valid(data->irq_pin)) {
                 at91_set_gpio_input(data->irq_pin, 0);
                 at91_set_deglitch(data->irq_pin, 1);
         }
 
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 0);
                 at91_set_deglitch(data->det_pin, 1);
         }
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 19ac7c0729a0..b85b9ea60170 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -20,11 +19,11 @@
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -176,6 +175,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -251,28 +253,19 @@ void __init at91sam9261_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9261_gpio[] = {
+static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
         {
                 .id             = AT91SAM9261_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9261_BASE_PIOA,
         }, {
                 .id             = AT91SAM9261_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9261_BASE_PIOB,
         }, {
                 .id             = AT91SAM9261_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9261_BASE_PIOC,
         }
 };
 
-static void at91sam9261_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9261 processor initialization
  * -------------------------------------------------------------------- */
@@ -285,10 +278,16 @@ static void __init at91sam9261_map_io(void)
                 at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
 }
 
+static void __init at91sam9261_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
+}
+
 static void __init at91sam9261_initialize(void)
 {
         arm_pm_restart = at91sam9_alt_restart;
-        pm_power_off = at91sam9261_poweroff;
         at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
                         | (1 << AT91SAM9261_ID_IRQ2);
 
@@ -341,6 +340,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9261_soc = {
         .map_io = at91sam9261_map_io,
         .default_irq_priority = at91sam9261_default_irq_priority,
+        .ioremap_registers = at91sam9261_ioremap_registers,
         .register_clocks = at91sam9261_register_clocks,
         .init = at91sam9261_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index a178b58b0b9c..fc59cbdb0e3c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -118,7 +118,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
@@ -171,13 +171,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -240,15 +240,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         at91_set_A_periph(AT91_PIN_PC0, 0);             /* NANDOE */
@@ -600,8 +600,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9261_BASE_RTT,
+                .end    = AT91SAM9261_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -624,10 +624,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9261_BASE_WDT,
+                .end    = AT91SAM9261_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9261_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -816,8 +825,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9261_BASE_DBGU,
+                .end    = AT91SAM9261_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 50d016310031..79e3669b1117 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -19,11 +18,11 @@
 #include <mach/at91sam9263.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -118,7 +117,7 @@ static struct clk pwm_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91SAM9263_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -182,6 +181,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@@ -191,6 +192,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioCDE_clk),
+        CLKDEV_CON_ID("pioD", &pioCDE_clk),
+        CLKDEV_CON_ID("pioE", &pioCDE_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -263,36 +269,25 @@ void __init at91sam9263_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9263_gpio[] = {
+static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
         {
                 .id             = AT91SAM9263_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9263_BASE_PIOA,
         }, {
                 .id             = AT91SAM9263_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9263_BASE_PIOB,
         }, {
                 .id             = AT91SAM9263_ID_PIOCDE,
-                .offset         = AT91_PIOC,
-                .clock          = &pioCDE_clk,
+                .regbase        = AT91SAM9263_BASE_PIOC,
         }, {
                 .id             = AT91SAM9263_ID_PIOCDE,
-                .offset         = AT91_PIOD,
-                .clock          = &pioCDE_clk,
+                .regbase        = AT91SAM9263_BASE_PIOD,
         }, {
                 .id             = AT91SAM9263_ID_PIOCDE,
-                .offset         = AT91_PIOE,
-                .clock          = &pioCDE_clk,
+                .regbase        = AT91SAM9263_BASE_PIOE,
         }
 };
 
-static void at91sam9263_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9263 processor initialization
  * -------------------------------------------------------------------- */
@@ -303,10 +298,17 @@ static void __init at91sam9263_map_io(void)
         at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
 }
 
+static void __init at91sam9263_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
+        at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
+}
+
 static void __init at91sam9263_initialize(void)
 {
         arm_pm_restart = at91sam9_alt_restart;
-        pm_power_off = at91sam9263_poweroff;
         at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
         /* Register GPIO subsystem */
@@ -358,6 +360,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9263_soc = {
         .map_io = at91sam9263_map_io,
         .default_irq_priority = at91sam9263_default_irq_priority,
+        .ioremap_registers = at91sam9263_ioremap_registers,
         .register_clocks = at91sam9263_register_clocks,
         .init = at91sam9263_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index d5fbac9ff4fa..7b46b2787022 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -70,7 +70,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -123,7 +123,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
@@ -144,7 +144,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -171,12 +171,12 @@ static struct platform_device at91sam9263_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -208,7 +208,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91sam9263_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -276,13 +276,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         if (mmc_id == 0) {              /* MCI0 */
@@ -430,17 +430,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
         }
         at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
 
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
 
-        if (data->irq_pin) {
+        if (gpio_is_valid(data->irq_pin)) {
                 at91_set_gpio_input(data->irq_pin, 1);
                 at91_set_deglitch(data->irq_pin, 1);
         }
 
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 /* initially off */
                 at91_set_gpio_output(data->vcc_pin, 0);
 
@@ -473,8 +473,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC0,
-                .end    = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
+                .start  = AT91SAM9263_BASE_ECC0,
+                .end    = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -500,15 +500,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -749,7 +749,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PB3, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -956,8 +956,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt0_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT0,
-                .end    = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
+                .start  = AT91SAM9263_BASE_RTT0,
+                .end    = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -971,8 +971,8 @@ static struct platform_device at91sam9263_rtt0_device = {
 
 static struct resource rtt1_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT1,
-                .end    = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
+                .start  = AT91SAM9263_BASE_RTT1,
+                .end    = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -996,10 +996,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9263_BASE_WDT,
+                .end    = AT91SAM9263_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9263_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -1196,8 +1205,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9263_BASE_DBGU,
+                .end    = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4ba85499fa97..d89ead740a99 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -25,7 +25,17 @@
 
 static u32 pit_cycle;           /* write-once */
 static u32 pit_cnt;             /* access only w/system irq blocked */
+static void __iomem *pit_base_addr __read_mostly;
 
+static inline unsigned int pit_read(unsigned int reg_offset)
+{
+        return __raw_readl(pit_base_addr + reg_offset);
+}
+
+static inline void pit_write(unsigned int reg_offset, unsigned long value)
+{
+        __raw_writel(value, pit_base_addr + reg_offset);
+}
 
 /*
  * Clocksource:  just a monotonic counter of MCK/16 cycles.
@@ -39,7 +49,7 @@ static cycle_t read_pit_clk(struct clocksource *cs)
 
         raw_local_irq_save(flags);
         elapsed = pit_cnt;
-        t = at91_sys_read(AT91_PIT_PIIR);
+        t = pit_read(AT91_PIT_PIIR);
         raw_local_irq_restore(flags);
 
         elapsed += PIT_PICNT(t) * pit_cycle;
@@ -64,8 +74,8 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
                 /* update clocksource counter */
-                pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
-                at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
+                pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR));
+                pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
                                 | AT91_PIT_PITIEN);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
@@ -74,7 +84,7 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         case CLOCK_EVT_MODE_SHUTDOWN:
         case CLOCK_EVT_MODE_UNUSED:
                 /* disable irq, leaving the clocksource active */
-                at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+                pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 break;
@@ -103,11 +113,11 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
         /* The PIT interrupt may be disabled, and is shared */
         if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-                        && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
+                        && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
                 unsigned nr_ticks;
 
                 /* Get number of ticks performed before irq, and ack it */
-                nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+                nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR));
                 do {
                         pit_cnt += pit_cycle;
                         pit_clkevt.event_handler(&pit_clkevt);
@@ -129,14 +139,14 @@ static struct irqaction at91sam926x_pit_irq = {
 static void at91sam926x_pit_reset(void)
 {
         /* Disable timer and irqs */
-        at91_sys_write(AT91_PIT_MR, 0);
+        pit_write(AT91_PIT_MR, 0);
 
         /* Clear any pending interrupts, wait for PIT to stop counting */
-        while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
+        while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
                 cpu_relax();
 
         /* Start PIT but don't enable IRQ */
-        at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+        pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
 }
 
 /*
@@ -178,7 +188,15 @@ static void __init at91sam926x_pit_init(void)
 static void at91sam926x_pit_suspend(void)
 {
         /* Disable timer */
-        at91_sys_write(AT91_PIT_MR, 0);
+        pit_write(AT91_PIT_MR, 0);
+}
+
+void __init at91sam926x_ioremap_pit(u32 addr)
+{
+        pit_base_addr = ioremap(addr, 16);
+
+        if (!pit_base_addr)
+                panic("Impossible to ioremap PIT\n");
 }
 
 struct sys_timer at91sam926x_timer = {
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index ff21f7a60c63..7032dd32cdf0 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
@@ -20,12 +19,12 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/cpu.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -150,7 +149,7 @@ static struct clk ac97_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91SAM9G45_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -209,6 +208,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         /* One additional fake clock for ohci */
         CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
         CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
@@ -231,6 +232,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
+        CLKDEV_CON_ID("pioD", &pioDE_clk),
+        CLKDEV_CON_ID("pioE", &pioDE_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -293,27 +299,22 @@ void __init at91sam9g45_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9g45_gpio[] = {
+static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
         {
                 .id             = AT91SAM9G45_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOA,
         }, {
                 .id             = AT91SAM9G45_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOB,
         }, {
                 .id             = AT91SAM9G45_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOC,
         }, {
                 .id             = AT91SAM9G45_ID_PIODE,
-                .offset         = AT91_PIOD,
-                .clock          = &pioDE_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOD,
         }, {
                 .id             = AT91SAM9G45_ID_PIODE,
-                .offset         = AT91_PIOE,
-                .clock          = &pioDE_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOE,
         }
 };
 
@@ -322,12 +323,6 @@ static void at91sam9g45_restart(char mode, const char *cmd)
         at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
-static void at91sam9g45_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
@@ -338,10 +333,16 @@ static void __init at91sam9g45_map_io(void)
         init_consistent_dma_size(SZ_4M);
 }
 
+static void __init at91sam9g45_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
+}
+
 static void __init at91sam9g45_initialize(void)
 {
         arm_pm_restart = at91sam9g45_restart;
-        pm_power_off = at91sam9g45_poweroff;
         at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 
         /* Register GPIO subsystem */
@@ -393,6 +394,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9g45_soc = {
         .map_io = at91sam9g45_map_io,
         .default_irq_priority = at91sam9g45_default_irq_priority,
+        .ioremap_registers = at91sam9g45_ioremap_registers,
         .register_clocks = at91sam9g45_register_clocks,
         .init = at91sam9g45_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 09a16d6bd5cd..b7582dd10dc3 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -44,8 +44,8 @@ static struct at_dma_platform_data atdma_pdata = {
 
 static struct resource hdmac_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DMA,
-                .end    = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+                .start  = AT91SAM9G45_BASE_DMA,
+                .end    = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -120,7 +120,7 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -181,7 +181,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -263,7 +263,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
-        if (data && data->vbus_pin > 0) {
+        if (data && gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -284,7 +284,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -311,12 +311,12 @@ static struct platform_device at91sam9g45_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -348,7 +348,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91sam9g45_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -449,11 +449,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 
 
         /* input/irq */
-        if (data->slot[0].detect_pin) {
+        if (gpio_is_valid(data->slot[0].detect_pin)) {
                 at91_set_gpio_input(data->slot[0].detect_pin, 1);
                 at91_set_deglitch(data->slot[0].detect_pin, 1);
         }
-        if (data->slot[0].wp_pin)
+        if (gpio_is_valid(data->slot[0].wp_pin))
                 at91_set_gpio_input(data->slot[0].wp_pin, 1);
 
         if (mmc_id == 0) {              /* MCI0 */
@@ -529,8 +529,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91SAM9G45_BASE_ECC,
+                .end    = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -556,15 +556,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -859,7 +859,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PD6, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -1009,10 +1009,24 @@ static void __init at91_add_device_tc(void) { }
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct resource rtc_resources[] = {
+        [0] = {
+                .start  = AT91SAM9G45_BASE_RTC,
+                .end    = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91_ID_SYS,
+                .end    = AT91_ID_SYS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
 static struct platform_device at91sam9g45_rtc_device = {
         .name           = "at91_rtc",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = rtc_resources,
+        .num_resources  = ARRAY_SIZE(rtc_resources),
 };
 
 static void __init at91_add_device_rtc(void)
@@ -1081,8 +1095,8 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9G45_BASE_RTT,
+                .end    = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -1133,10 +1147,19 @@ static void __init at91_add_device_trng(void) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9G45_BASE_WDT,
+                .end    = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9g45_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -1332,8 +1355,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9G45_BASE_DBGU,
+                .end    = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 61cbb46f5b0e..d6bcb1da11df 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -20,11 +19,11 @@
 #include <mach/at91sam9rl.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -184,6 +183,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
+        CLKDEV_CON_ID("pioD", &pioD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -243,32 +246,22 @@ void __init at91sam9rl_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9rl_gpio[] = {
+static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
         {
                 .id             = AT91SAM9RL_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOA,
         }, {
                 .id             = AT91SAM9RL_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOB,
         }, {
                 .id             = AT91SAM9RL_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOC,
         }, {
                 .id             = AT91SAM9RL_ID_PIOD,
-                .offset         = AT91_PIOD,
-                .clock          = &pioD_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOD,
         }
 };
 
-static void at91sam9rl_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9RL processor initialization
  * -------------------------------------------------------------------- */
@@ -290,10 +283,16 @@ static void __init at91sam9rl_map_io(void)
         at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
 }
 
+static void __init at91sam9rl_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
+}
+
 static void __init at91sam9rl_initialize(void)
 {
         arm_pm_restart = at91sam9_alt_restart;
-        pm_power_off = at91sam9rl_poweroff;
         at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
         /* Register GPIO subsystem */
@@ -345,6 +344,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9rl_soc = {
         .map_io = at91sam9rl_map_io,
         .default_irq_priority = at91sam9rl_default_irq_priority,
+        .ioremap_registers = at91sam9rl_ioremap_registers,
         .register_clocks = at91sam9rl_register_clocks,
         .init = at91sam9rl_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 628eb566d60c..61908dce9784 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -39,8 +39,8 @@ static struct at_dma_platform_data atdma_pdata = {
 
 static struct resource hdmac_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DMA,
-                .end    = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+                .start  = AT91SAM9RL_BASE_DMA,
+                .end    = AT91SAM9RL_BASE_DMA + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [2] = {
@@ -147,7 +147,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
-        if (data && data->vbus_pin > 0) {
+        if (data && gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -201,13 +201,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -248,8 +248,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91SAM9RL_BASE_ECC,
+                .end    = AT91SAM9RL_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -275,15 +275,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         at91_set_A_periph(AT91_PIN_PB4, 0);             /* NANDOE */
@@ -483,7 +483,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PD4, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -685,8 +685,8 @@ static void __init at91_add_device_rtc(void) {}
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9RL_BASE_RTT,
+                .end    = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -709,10 +709,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9RL_BASE_WDT,
+                .end    = AT91SAM9RL_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9rl_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -908,8 +917,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9RL_BASE_DBGU,
+                .end    = AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 367d5cd5e362..2628384aaae1 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -63,13 +63,15 @@ static void __init onearm_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata onearm_eth_data = {
+static struct macb_platform_data __initdata onearm_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata onearm_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata onearm_udc_data = {
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 4282d96dffa8..3bb40694b02d 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -75,6 +75,8 @@ static void __init afeb9260_init_early(void)
  */
 static struct at91_usbh_data __initdata afeb9260_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
  */
 static struct at91_udc_data __initdata afeb9260_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -103,7 +105,7 @@ static struct spi_board_info afeb9260_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata afeb9260_macb_data = {
+static struct macb_platform_data __initdata afeb9260_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA9,
         .is_rmii        = 0,
 };
@@ -138,6 +140,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
         .bus_width_16   = 0,
         .parts          = afeb9260_nand_partition,
         .num_parts      = ARRAY_SIZE(afeb9260_nand_partition),
+        .det_pin        = -EINVAL,
 };
 
 
@@ -149,6 +152,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
         .wp_pin         = AT91_PIN_PC4,
         .slot_b         = 1,
         .wire4          = 1,
+        .vcc_pin        = -EINVAL,
 };
 
 
@@ -169,6 +173,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 static struct at91_cf_data afeb9260_cf_data = {
         .chipselect = 4,
         .irq_pin    = AT91_PIN_PA6,
+        .det_pin        = -EINVAL,
+        .vcc_pin        = -EINVAL,
         .rst_pin    = AT91_PIN_PA7,
         .flags      = AT91_CF_TRUE_IDE,
 };
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index f90cfb32bad2..8510e9e54988 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -62,6 +62,8 @@ static void __init cam60_init_early(void)
  */
 static struct at91_usbh_data __initdata cam60_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -115,7 +117,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata at91_eth_data cam60_macb_data = {
+static struct __initdata macb_platform_data cam60_macb_data = {
         .phy_irq_pin    = AT91_PIN_PB5,
         .is_rmii        = 0,
 };
@@ -135,7 +137,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
 static struct atmel_nand_data __initdata cam60_nand_data = {
         .ale            = 21,
         .cle            = 22,
-        // .det_pin     = ... not there
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA9,
         .enable_pin     = AT91_PIN_PA7,
         .parts          = cam60_nand_partition,
@@ -163,7 +165,7 @@ static struct sam9_smc_config __initdata cam60_nand_smc_config = {
 static void __init cam60_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &cam60_nand_smc_config);
+        sam9_smc_configure(0, 3, &cam60_nand_smc_config);
 
         at91_add_device_nand(&cam60_nand_data);
 }
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 5dffd3be62d2..ac3de4f7c31d 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -70,6 +70,8 @@ static void __init cap9adk_init_early(void)
  */
 static struct at91_usbh_data __initdata cap9adk_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -144,16 +146,17 @@ static struct spi_board_info cap9adk_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata cap9adk_mmc_data = {
         .wire4          = 1,
-//      .det_pin        = ... not connected
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata cap9adk_macb_data = {
+static struct macb_platform_data __initdata cap9adk_macb_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
@@ -172,8 +175,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
 static struct atmel_nand_data __initdata cap9adk_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
-//      .rdy_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .rdy_pin        = -EINVAL,
         .enable_pin     = AT91_PIN_PD15,
         .parts          = cap9adk_nand_partitions,
         .num_parts      = ARRAY_SIZE(cap9adk_nand_partitions),
@@ -212,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
                 cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &cap9adk_nand_smc_config);
+        sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
 
         at91_add_device_nand(&cap9adk_nand_data);
 }
@@ -282,7 +285,7 @@ static __init void cap9adk_add_device_nor(void)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
         /* configure chip-select 0 (NOR) */
-        sam9_smc_configure(0, &cap9adk_nor_smc_config);
+        sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
 
         platform_device_register(&cap9adk_nor_flash);
 }
@@ -351,7 +354,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
  * AC97
  */
 static struct ac97c_platform_data cap9adk_ac97_data = {
-//      .reset_pin      = ... not connected
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 774c87fcbd5b..59d9cf997537 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -57,13 +57,15 @@ static void __init carmeva_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata carmeva_eth_data = {
+static struct macb_platform_data __initdata carmeva_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata carmeva_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata carmeva_udc_data = {
@@ -75,8 +77,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //      .det_pin        = AT91_PIN_PB0,
 //      .rst_pin        = AT91_PIN_PC5,
-        // .irq_pin     = ... not connected
-        // .vcc_pin     = ... always powered
+        // .irq_pin     = -EINVAL,
+        // .vcc_pin     = -EINVAL,
 // };
 
 static struct at91_mmc_data __initdata carmeva_mmc_data = {
@@ -84,6 +86,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PB10,
         .wp_pin         = AT91_PIN_PC14,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index fc885a4ce243..9ab3d1ea326d 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -86,6 +86,8 @@ static void __init cpu9krea_init_early(void)
  */
 static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,13 +95,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
  */
 static struct at91_udc_data __initdata cpu9krea_udc_data = {
         .vbus_pin       = AT91_PIN_PC8,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata cpu9krea_macb_data = {
+static struct macb_platform_data __initdata cpu9krea_macb_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
@@ -112,6 +115,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
+        .det_pin        = -EINVAL,
 };
 
 #ifdef CONFIG_MACH_CPU9260
@@ -156,7 +160,7 @@ static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
 
 static void __init cpu9krea_add_device_nand(void)
 {
-        sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+        sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
         at91_add_device_nand(&cpu9krea_nand_data);
 }
 
@@ -238,7 +242,7 @@ static __init void cpu9krea_add_device_nor(void)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
 
         /* configure chip-select 0 (NOR) */
-        sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+        sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
 
         platform_device_register(&cpu9krea_nor_flash);
 }
@@ -337,6 +341,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .det_pin        = AT91_PIN_PA29,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static void __init cpu9krea_board_init(void)
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index d35e65b08ccd..368e1427ad99 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -82,12 +82,15 @@ static void __init cpuat91_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata cpuat91_eth_data = {
+static struct macb_platform_data __initdata cpuat91_eth_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata cpuat91_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata cpuat91_udc_data = {
@@ -98,6 +101,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 static struct at91_mmc_data __initdata cpuat91_mmc_data = {
         .det_pin        = AT91_PIN_PC2,
         .wire4          = 1,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index c3936665e645..1a1547b1ce4e 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -58,18 +58,20 @@ static void __init csb337_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata csb337_eth_data = {
+static struct macb_platform_data __initdata csb337_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC2,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb337_udc_data = {
-        // this has no VBUS sensing pin
         .pullup_pin     = AT91_PIN_PA24,
+        .vbus_pin       = -EINVAL,
 };
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@@ -98,6 +100,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .wp_pin         = AT91_PIN_PD6,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 586100e2acbb..f650bf39455d 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -52,13 +52,15 @@ static void __init csb637_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata csb637_eth_data = {
+static struct macb_platform_data __initdata csb637_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC0,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata csb637_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb637_udc_data = {
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 0b7d32778210..bb6b434ec0c1 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -50,6 +50,7 @@ static void __init ek_init_early(void)
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC8,
         .enable_pin     = AT91_PIN_PC14,
 };
@@ -82,7 +83,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 45db7a3dbef0..d302ca3eeb64 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -60,13 +60,15 @@ static void __init eb9200_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata eb9200_eth_data = {
+static struct macb_platform_data __initdata eb9200_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata eb9200_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eb9200_udc_data = {
@@ -75,15 +77,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = {
 };
 
 static struct at91_cf_data __initdata eb9200_cf_data = {
+        .irq_pin        = -EINVAL,
         .det_pin        = AT91_PIN_PB0,
+        .vcc_pin        = -EINVAL,
         .rst_pin        = AT91_PIN_PC5,
-        // .irq_pin     = ... not connected
-        // .vcc_pin     = ... always powered
 };
 
 static struct at91_mmc_data __initdata eb9200_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2f9c16d29212..69966ce4d776 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,18 +64,23 @@ static void __init ecb_at91init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata ecb_at91eth_data = {
+static struct macb_platform_data __initdata ecb_at91eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata ecb_at91usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata ecb_at91mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c722607b..07ef35b0ec2c 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -47,13 +47,15 @@ static void __init eco920_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata eco920_eth_data = {
+static struct macb_platform_data __initdata eco920_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC2,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata eco920_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eco920_udc_data = {
@@ -64,6 +66,9 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 static struct at91_mmc_data __initdata eco920_mmc_data = {
         .slot_b         = 0,
         .wire4          = 0,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data eco920_flash_data = {
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4c3f65d9c59b..eec02cd57ced 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -52,12 +52,14 @@ static void __init flexibity_init_early(void)
 /* USB Host port */
 static struct at91_usbh_data __initdata flexibity_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /* USB Device port */
 static struct at91_udc_data __initdata flexibity_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /* SPI devices */
@@ -76,6 +78,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PC9,
         .wp_pin         = AT91_PIN_PC4,
+        .vcc_pin        = -EINVAL,
 };
 
 /* LEDs */
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index f27d1a780cfa..caf017f0f4ee 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -106,6 +106,8 @@ static void __init foxg20_init_early(void)
  */
 static struct at91_usbh_data __initdata foxg20_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -113,7 +115,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = {
  */
 static struct at91_udc_data __initdata foxg20_udc_data = {
         .vbus_pin       = AT91_PIN_PC6,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -135,7 +137,7 @@ static struct spi_board_info foxg20_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata foxg20_macb_data = {
+static struct macb_platform_data __initdata foxg20_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 1,
 };
@@ -147,6 +149,9 @@ static struct at91_eth_data __initdata foxg20_macb_data = {
 static struct at91_mmc_data __initdata foxg20_mmc_data = {
         .slot_b         = 1,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 2e95949737e6..230e71969fb7 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -80,6 +80,8 @@ static void __init gsia18s_init_early(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -87,13 +89,13 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata udc_data = {
         .vbus_pin       = AT91_PIN_PA22,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
         .phy_irq_pin    = AT91_PIN_PA28,
         .is_rmii        = 1,
 };
@@ -530,6 +532,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
 static struct at91_cf_data __initdata gsia18s_cf1_data = {
         .irq_pin        = AT91_PIN_PA27,
         .det_pin        = AT91_PIN_PB30,
+        .vcc_pin        = -EINVAL,
         .rst_pin        = AT91_PIN_PB31,
         .chipselect     = 5,
         .flags          = AT91_CF_TRUE_IDE,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 3bae73e63633..efde1b2327c8 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -61,13 +61,15 @@ static void __init kafa_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata kafa_eth_data = {
+static struct macb_platform_data __initdata kafa_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata kafa_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kafa_udc_data = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e61351ffad50..d75a4a2ad9c2 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,13 +69,15 @@ static void __init kb9202_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata kb9202_eth_data = {
+static struct macb_platform_data __initdata kb9202_eth_data = {
         .phy_irq_pin    = AT91_PIN_PB29,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata kb9202_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kb9202_udc_data = {
@@ -87,6 +89,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
         .det_pin        = AT91_PIN_PB2,
         .slot_b         = 0,
         .wire4          = 1,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -100,7 +104,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
 static struct atmel_nand_data __initdata kb9202_nand_data = {
         .ale            = 22,
         .cle            = 21,
-        // .det_pin     = ... not there
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC29,
         .enable_pin     = AT91_PIN_PC28,
         .parts          = kb9202_nand_partition,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index ef816c17dc61..3f8617c0e04e 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -72,6 +72,7 @@ static void __init neocore926_init_early(void)
 static struct at91_usbh_data __initdata neocore926_usbh_data = {
         .ports          = 2,
         .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = {
  */
 static struct at91_udc_data __initdata neocore926_udc_data = {
         .vbus_pin       = AT91_PIN_PA25,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -149,13 +150,14 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PE18,
         .wp_pin         = AT91_PIN_PE19,
+        .vcc_pin        = -EINVAL,
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata neocore926_macb_data = {
+static struct macb_platform_data __initdata neocore926_macb_data = {
         .phy_irq_pin    = AT91_PIN_PE31,
         .is_rmii        = 1,
 };
@@ -190,6 +192,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
         .enable_pin             = AT91_PIN_PD15,
         .parts                  = neocore926_nand_partition,
         .num_parts              = ARRAY_SIZE(neocore926_nand_partition),
+        .det_pin                = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
@@ -213,7 +216,7 @@ static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
 static void __init neocore926_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &neocore926_nand_smc_config);
+        sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
 
         at91_add_device_nand(&neocore926_nand_data);
 }
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 49e3f699b48e..b4a12fc184c8 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -96,9 +96,9 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 static void __init add_device_pcontrol(void)
 {
         /* configure chip-select 4 (IO compatible to 8051  X4 ) */
-        sam9_smc_configure(4, &pcontrol_smc_config[0]);
+        sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
         /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A  D4 ) */
-        sam9_smc_configure(7, &pcontrol_smc_config[1]);
+        sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
 }
 
 
@@ -107,6 +107,8 @@ static void __init add_device_pcontrol(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -122,7 +124,7 @@ static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
         .phy_irq_pin    = AT91_PIN_PA28,
         .is_rmii        = 1,
 };
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 0a8fe6a1b7c8..ab024fa11d5c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -60,13 +60,15 @@ static void __init picotux200_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata picotux200_eth_data = {
+static struct macb_platform_data __initdata picotux200_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata picotux200_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
@@ -74,6 +76,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .wp_pin         = AT91_PIN_PA17,
+        .vcc_pin        = -EINVAL,
 };
 
 #define PICOTUX200_FLASH_BASE   AT91_CHIPSELECT_0
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 07421bdb88ea..e029d220cb84 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -77,6 +77,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -84,7 +86,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
@@ -104,7 +106,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA31,
         .is_rmii        = 1,
 };
@@ -133,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -161,7 +163,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 static void __init ek_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -172,9 +174,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
-//      .det_pin        = ... not connected
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 /*
@@ -251,7 +253,7 @@ static void __init ek_board_init(void)
         /* LEDs */
         at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
         /* shutdown controller, wakeup button (5 msec low) */
-        at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+        at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
                                 | AT91_SHDW_RTTWKEN);
 }
 
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 80a8c9c6e922..782f37946af5 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -65,13 +65,15 @@ static void __init dk_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata dk_eth_data = {
+static struct macb_platform_data __initdata dk_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata dk_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata dk_udc_data = {
@@ -80,16 +82,19 @@ static struct at91_udc_data __initdata dk_udc_data = {
 };
 
 static struct at91_cf_data __initdata dk_cf_data = {
+        .irq_pin        = -EINVAL,
         .det_pin        = AT91_PIN_PB0,
+        .vcc_pin        = -EINVAL,
         .rst_pin        = AT91_PIN_PC5,
-        // .irq_pin     = ... not connected
-        // .vcc_pin     = ... always powered
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -143,7 +148,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
         .cle            = 21,
         .det_pin        = AT91_PIN_PB1,
         .rdy_pin        = AT91_PIN_PC2,
-        // .enable_pin  = ... not there
+        .enable_pin     = -EINVAL,
         .parts          = dk_nand_partition,
         .num_parts      = ARRAY_SIZE(dk_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 99fd7f8aee0e..ef7c12a92246 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -65,13 +65,15 @@ static void __init ek_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata ek_eth_data = {
+static struct macb_platform_data __initdata ek_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata ek_udc_data = {
@@ -85,6 +87,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .wp_pin         = AT91_PIN_PA17,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index e927df0175df..af0750fafa29 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -60,7 +60,7 @@ static void __init rsi_ews_init_early(void)
 /*
  * Ethernet
  */
-static struct at91_eth_data rsi_ews_eth_data __initdata = {
+static struct macb_platform_data rsi_ews_eth_data __initdata = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
@@ -70,6 +70,8 @@ static struct at91_eth_data rsi_ews_eth_data __initdata = {
  */
 static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 072d53af98d9..84bce587735f 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -72,6 +72,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -109,7 +111,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 0,
 };
@@ -134,7 +136,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -162,7 +164,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 static void __init ek_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -176,7 +178,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PC8,
         .wp_pin         = AT91_PIN_PC4,
-//      .vcc_pin        = ... not connected
+        .vcc_pin        = -EINVAL,
 };
 
 static void __init ek_board_init(void)
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4f10181a0782..be8233bcabdc 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -75,6 +75,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -151,7 +153,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 1,
 };
@@ -176,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -211,7 +213,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -223,9 +225,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 1,
         .wire4          = 1,
-//      .det_pin        = ... not connected
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b005b738e8ff..40895072a1a7 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -131,7 +131,7 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 static void __init ek_add_device_dm9000(void)
 {
         /* Configure chip-select 2 (DM9000) */
-        sam9_smc_configure(2, &dm9000_smc_config);
+        sam9_smc_configure(0, 2, &dm9000_smc_config);
 
         /* Configure Reset signal as output */
         at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -151,6 +151,8 @@ static void __init ek_add_device_dm9000(void) {}
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -159,7 +161,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PB29,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -182,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 22,
         .cle            = 21,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC15,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -217,7 +219,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -345,6 +347,9 @@ static struct spi_board_info ek_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index bccdcf23caa1..29f66052fe63 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
         .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -81,7 +82,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PA25,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -151,14 +152,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PE18,
         .wp_pin         = AT91_PIN_PE19,
-//      .vcc_pin        = ... not connected
+        .vcc_pin        = -EINVAL,
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PE31,
         .is_rmii        = 1,
 };
@@ -183,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
         .parts          = ek_nand_partition,
@@ -218,7 +219,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -353,6 +354,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 64fc75c9d0ac..843d6286c6f4 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -86,6 +86,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -123,7 +125,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 1,
 };
@@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .cle            = 22,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
+        .det_pin        = -EINVAL,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -195,7 +198,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
         .slot[1] = {
                 .bus_width      = 4,
                 .detect_pin     = AT91_PIN_PC9,
+                .wp_pin         = -EINVAL,
         },
 
 };
@@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 1,    /* Only one slot so use slot B */
         .wire4          = 1,
         .det_pin        = AT91_PIN_PC9,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void)
         if (ek_have_2mmc()) {
                 ek_mmc_data.slot[0].bus_width = 4;
                 ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+                ek_mmc_data.slot[0].wp_pin = -1;
         }
         at91_add_device_mci(0, &ek_mmc_data);
 #else
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 92de9127923a..ea0d1b9c2b7b 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -69,6 +69,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
         .ports          = 2,
         .vbus_pin       = {AT91_PIN_PD1, AT91_PIN_PD3},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -100,6 +101,7 @@ static struct mci_platform_data __initdata mci0_data = {
         .slot[0] = {
                 .bus_width      = 4,
                 .detect_pin     = AT91_PIN_PD10,
+                .wp_pin         = -EINVAL,
         },
 };
 
@@ -115,7 +117,7 @@ static struct mci_platform_data __initdata mci1_data = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PD5,
         .is_rmii        = 1,
 };
@@ -143,6 +145,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .cle            = 22,
         .rdy_pin        = AT91_PIN_PC8,
         .enable_pin     = AT91_PIN_PC14,
+        .det_pin        = -EINVAL,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -175,7 +178,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -330,6 +333,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b2b748239f36..c1366d0032bf 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PA15,
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
@@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PD17,
         .enable_pin     = AT91_PIN_PB6,
         .parts          = ek_nand_partition,
@@ -119,7 +119,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 static void __init ek_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 0df01c6e2d0c..4770db08e5a6 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -57,15 +57,19 @@ static void __init snapper9260_init_early(void)
 
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata snapper9260_udc_data = {
         .vbus_pin               = SNAPPER9260_IO_EXP_GPIO(5),
         .vbus_active_low        = 1,
         .vbus_polled            = 1,
+        .pullup_pin             = -EINVAL,
 };
 
-static struct at91_eth_data snapper9260_macb_data = {
+static struct macb_platform_data snapper9260_macb_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
@@ -104,6 +108,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
         .parts          = snapper9260_nand_partitions,
         .num_parts      = ARRAY_SIZE(snapper9260_nand_partitions),
         .bus_width_16   = 0,
+        .enable_pin     = -EINVAL,
+        .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
@@ -149,7 +155,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
 static void __init snapper9260_add_device_nand(void)
 {
         at91_set_A_periph(AT91_PIN_PC14, 0);
-        sam9_smc_configure(3, &snapper9260_nand_smc_config);
+        sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
         at91_add_device_nand(&snapper9260_nand_data);
 }
 
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 936e5fd7f406..72eb3b4d9ab6 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
+        .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {
@@ -108,7 +109,7 @@ static struct sam9_smc_config __initdata nand_smc_config = {
 static void __init add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &nand_smc_config);
+        sam9_smc_configure(0, 3, &nand_smc_config);
 
         at91_add_device_nand(&nand_data);
 }
@@ -122,12 +123,17 @@ static void __init add_device_nand(void)
 static struct mci_platform_data __initdata mmc_data = {
         .slot[0] = {
                 .bus_width      = 4,
+                .detect_pin     = -1,
+                .wp_pin         = -1,
         },
 };
 #else
 static struct at91_mmc_data __initdata mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -137,6 +143,8 @@ static struct at91_mmc_data __initdata mmc_data = {
  */
 static struct at91_usbh_data __initdata usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -145,19 +153,19 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata portuxg20_udc_data = {
         .vbus_pin       = AT91_PIN_PC7,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
         .vbus_pin       = AT91_PIN_PA22,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
         .phy_irq_pin    = AT91_PIN_PA28,
         .is_rmii        = 1,
 };
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 0a20bab21f99..26c36fc2d1e5 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -66,6 +66,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -73,7 +75,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PB11,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static void __init ek_add_device_udc(void)
@@ -146,7 +148,7 @@ static void __init ek_add_device_spi(void)
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PE31,
         .is_rmii        = 1,
 };
@@ -193,7 +195,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
         .parts          = ek_nand_partition,
@@ -245,9 +247,9 @@ static void __init ek_add_device_nand(void)
 
         /* configure chip-select 3 (NAND) */
         if (machine_is_usb_a9g20())
-                sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+                sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
         else
-                sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+                sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -344,7 +346,7 @@ static void __init ek_board_init(void)
                 /* I2C */
                 at91_add_device_i2c(NULL, 0);
                 /* shutdown controller, wakeup button (5 msec low) */
-                at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+                at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
                                 | AT91_SHDW_WKMODE0_LOW
                                 | AT91_SHDW_RTTWKEN);
         }
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 12a3f955162b..bbd553e1cd93 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -110,7 +110,7 @@ static struct gpio_led yl9200_leds[] = {
 /*
  * Ethernet
  */
-static struct at91_eth_data __initdata yl9200_eth_data = {
+static struct macb_platform_data __initdata yl9200_eth_data = {
         .phy_irq_pin            = AT91_PIN_PB28,
         .is_rmii                = 1,
 };
@@ -120,6 +120,8 @@ static struct at91_eth_data __initdata yl9200_eth_data = {
  */
 static struct at91_usbh_data __initdata yl9200_usbh_data = {
         .ports                  = 1,    /* PQFP version of AT91RM9200 */
+        .vbus_pin               = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -137,8 +139,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
  */
 static struct at91_mmc_data __initdata yl9200_mmc_data = {
         .det_pin        = AT91_PIN_PB9,
-        // .wp_pin      = ... not connected
         .wire4          = 1,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 /*
@@ -175,7 +178,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 static struct atmel_nand_data __initdata yl9200_nand_data = {
         .ale            = 6,
         .cle            = 7,
-        // .det_pin     = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
         .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
         .parts          = yl9200_nand_partition,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 7f4503bc4cbb..4866b8180d66 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -29,6 +29,7 @@ extern void __init at91_aic_init(unsigned int priority[]);
  /* Timer */
 struct sys_timer;
 extern struct sys_timer at91rm9200_timer;
+extern void at91sam926x_ioremap_pit(u32 addr);
 extern struct sys_timer at91sam926x_timer;
 extern struct sys_timer at91x40_timer;
 
@@ -59,14 +60,16 @@ extern void at91_irq_resume(void);
 /* reset */
 extern void at91sam9_alt_restart(char, const char *);
 
+/* shutdown */
+extern void at91_ioremap_shdwc(u32 base_addr);
+
  /* GPIO */
 #define AT91RM9200_PQFP         3       /* AT91RM9200 PQFP package has 3 banks */
 #define AT91RM9200_BGA          4       /* AT91RM9200 BGA package has 4 banks */
 
 struct at91_gpio_bank {
         unsigned short id;              /* peripheral ID */
-        unsigned long offset;           /* offset from system peripheral base */
-        struct clk *clock;              /* associated clock */
+        unsigned long regbase;          /* offset from system peripheral base */
 };
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 224e9e2f8674..74d6783eeabb 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -29,8 +29,9 @@
 struct at91_gpio_chip {
         struct gpio_chip        chip;
         struct at91_gpio_chip   *next;          /* Bank sharing same clock */
-        struct at91_gpio_bank   *bank;          /* Bank definition */
+        int                     id;             /* ID of register bank */
         void __iomem            *regbase;       /* Base of register bank */
+        struct clk              *clock;         /* associated clock */
 };
 
 #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
@@ -58,18 +59,17 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
         }
 
 static struct at91_gpio_chip gpio_chip[] = {
-        AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+        AT91_GPIO_CHIP("pioA", 0x00, 32),
+        AT91_GPIO_CHIP("pioB", 0x20, 32),
+        AT91_GPIO_CHIP("pioC", 0x40, 32),
+        AT91_GPIO_CHIP("pioD", 0x60, 32),
+        AT91_GPIO_CHIP("pioE", 0x80, 32),
 };
 
 static int gpio_banks;
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
-        pin -= PIN_BASE;
         pin /= 32;
         if (likely(pin < gpio_banks))
                 return gpio_chip[pin].regbase;
@@ -79,7 +79,6 @@ static inline void __iomem *pin_to_controller(unsigned pin)
 
 static inline unsigned pin_to_mask(unsigned pin)
 {
-        pin -= PIN_BASE;
         return 1 << (pin % 32);
 }
 
@@ -274,8 +273,9 @@ static u32 backups[MAX_GPIO_BANKS];
 
 static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
 {
-        unsigned        mask = pin_to_mask(d->irq);
-        unsigned        bank = (d->irq - PIN_BASE) / 32;
+        unsigned        pin = irq_to_gpio(d->irq);
+        unsigned        mask = pin_to_mask(pin);
+        unsigned        bank = pin / 32;
 
         if (unlikely(bank >= MAX_GPIO_BANKS))
                 return -EINVAL;
@@ -285,7 +285,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
         else
                 wakeups[bank] &= ~mask;
 
-        irq_set_irq_wake(gpio_chip[bank].bank->id, state);
+        irq_set_irq_wake(gpio_chip[bank].id, state);
 
         return 0;
 }
@@ -302,7 +302,7 @@ void at91_gpio_suspend(void)
                 __raw_writel(wakeups[i], pio + PIO_IER);
 
                 if (!wakeups[i])
-                        clk_disable(gpio_chip[i].bank->clock);
+                        clk_disable(gpio_chip[i].clock);
                 else {
 #ifdef CONFIG_PM_DEBUG
                         printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -319,7 +319,7 @@ void at91_gpio_resume(void)
                 void __iomem    *pio = gpio_chip[i].regbase;
 
                 if (!wakeups[i])
-                        clk_enable(gpio_chip[i].bank->clock);
+                        clk_enable(gpio_chip[i].clock);
 
                 __raw_writel(wakeups[i], pio + PIO_IDR);
                 __raw_writel(backups[i], pio + PIO_IER);
@@ -344,8 +344,9 @@ void at91_gpio_resume(void)
 
 static void gpio_irq_mask(struct irq_data *d)
 {
-        void __iomem    *pio = pin_to_controller(d->irq);
-        unsigned        mask = pin_to_mask(d->irq);
+        unsigned        pin = irq_to_gpio(d->irq);
+        void __iomem    *pio = pin_to_controller(pin);
+        unsigned        mask = pin_to_mask(pin);
 
         if (pio)
                 __raw_writel(mask, pio + PIO_IDR);
@@ -353,8 +354,9 @@ static void gpio_irq_mask(struct irq_data *d)
 
 static void gpio_irq_unmask(struct irq_data *d)
 {
-        void __iomem    *pio = pin_to_controller(d->irq);
-        unsigned        mask = pin_to_mask(d->irq);
+        unsigned        pin = irq_to_gpio(d->irq);
+        void __iomem    *pio = pin_to_controller(pin);
+        unsigned        mask = pin_to_mask(pin);
 
         if (pio)
                 __raw_writel(mask, pio + PIO_IER);
@@ -382,7 +384,7 @@ static struct irq_chip gpio_irqchip = {
 
 static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-        unsigned        pin;
+        unsigned        irq_pin;
         struct irq_data *idata = irq_desc_get_irq_data(desc);
         struct irq_chip *chip = irq_data_get_irq_chip(idata);
         struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
@@ -405,12 +407,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
                         continue;
                 }
 
-                pin = at91_gpio->chip.base;
+                irq_pin = gpio_to_irq(at91_gpio->chip.base);
 
                 while (isr) {
                         if (isr & 1)
-                                generic_handle_irq(pin);
-                        pin++;
+                                generic_handle_irq(irq_pin);
+                        irq_pin++;
                         isr >>= 1;
                 }
         }
@@ -438,7 +440,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused)
                 seq_printf(s, "%i:\t", j);
 
                 for (bank = 0; bank < gpio_banks; bank++) {
-                        unsigned        pin  = PIN_BASE + (32 * bank) + j;
+                        unsigned        pin  = (32 * bank) + j;
                         void __iomem    *pio = pin_to_controller(pin);
                         unsigned        mask = pin_to_mask(pin);
 
@@ -491,27 +493,28 @@ static struct lock_class_key gpio_lock_class;
  */
 void __init at91_gpio_irq_setup(void)
 {
-        unsigned                pioc, pin;
+        unsigned                pioc, irq = gpio_to_irq(0);
         struct at91_gpio_chip   *this, *prev;
 
-        for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
+        for (pioc = 0, this = gpio_chip, prev = NULL;
                         pioc++ < gpio_banks;
                         prev = this, this++) {
-                unsigned        id = this->bank->id;
+                unsigned        id = this->id;
                 unsigned        i;
 
                 __raw_writel(~0, this->regbase + PIO_IDR);
 
-                for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
-                        irq_set_lockdep_class(pin, &gpio_lock_class);
+                for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32;
+                     i++, irq++) {
+                        irq_set_lockdep_class(irq, &gpio_lock_class);
 
                         /*
                          * Can use the "simple" and not "edge" handler since it's
                          * shorter, and the AIC handles interrupts sanely.
                          */
-                        irq_set_chip_and_handler(pin, &gpio_irqchip,
+                        irq_set_chip_and_handler(irq, &gpio_irqchip,
                                                  handle_simple_irq);
-                        set_irq_flags(pin, IRQF_VALID);
+                        set_irq_flags(irq, IRQF_VALID);
                 }
 
                 /* The toplevel handler handles one bank of GPIOs, except
@@ -524,7 +527,7 @@ void __init at91_gpio_irq_setup(void)
                 irq_set_chip_data(id, this);
                 irq_set_chained_handler(id, gpio_irq_handler);
         }
-        pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+        pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks);
 }
 
 /* gpiolib support */
@@ -612,16 +615,26 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
         for (i = 0; i < nr_banks; i++) {
                 at91_gpio = &gpio_chip[i];
 
-                at91_gpio->bank = &data[i];
-                at91_gpio->chip.base = PIN_BASE + i * 32;
-                at91_gpio->regbase = at91_gpio->bank->offset +
-                        (void __iomem *)AT91_VA_BASE_SYS;
+                at91_gpio->id = data[i].id;
+                at91_gpio->chip.base = i * 32;
+
+                at91_gpio->regbase = ioremap(data[i].regbase, 512);
+                if (!at91_gpio->regbase) {
+                        pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
+                        continue;
+                }
+
+                at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
+                if (!at91_gpio->clock) {
+                        pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
+                        continue;
+                }
 
                 /* enable PIO controller's clock */
-                clk_enable(at91_gpio->bank->clock);
+                clk_enable(at91_gpio->clock);
 
                 /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
-                if (last && last->bank->id == at91_gpio->bank->id)
+                if (last && last->id == at91_gpio->id)
                         last->next = at91_gpio;
                 last = at91_gpio;
 
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index 03566799d3be..3045781c473f 100644
--- a/arch/arm/mach-at91/include/mach/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -16,7 +16,19 @@
 #ifndef AT91_AIC_H
 #define AT91_AIC_H
 
-#define AT91_AIC_SMR(n)         (AT91_AIC + ((n) * 4))  /* Source Mode Registers 0-31 */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_aic_base;
+
+#define at91_aic_read(field) \
+        __raw_readl(at91_aic_base + field)
+
+#define at91_aic_write(field, value) \
+        __raw_writel(value, at91_aic_base + field);
+#else
+.extern at91_aic_base
+#endif
+
+#define AT91_AIC_SMR(n)         ((n) * 4)               /* Source Mode Registers 0-31 */
 #define         AT91_AIC_PRIOR          (7 << 0)                /* Priority Level */
 #define         AT91_AIC_SRCTYPE        (3 << 5)                /* Interrupt Source Type */
 #define                 AT91_AIC_SRCTYPE_LOW            (0 << 5)
@@ -24,30 +36,30 @@
 #define                 AT91_AIC_SRCTYPE_HIGH           (2 << 5)
 #define                 AT91_AIC_SRCTYPE_RISING         (3 << 5)
 
-#define AT91_AIC_SVR(n)         (AT91_AIC + 0x80 + ((n) * 4))   /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR            (AT91_AIC + 0x100)      /* Interrupt Vector Register */
-#define AT91_AIC_FVR            (AT91_AIC + 0x104)      /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR            (AT91_AIC + 0x108)      /* Interrupt Status Register */
+#define AT91_AIC_SVR(n)         (0x80 + ((n) * 4))      /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR            0x100                   /* Interrupt Vector Register */
+#define AT91_AIC_FVR            0x104                   /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR            0x108                   /* Interrupt Status Register */
 #define         AT91_AIC_IRQID          (0x1f << 0)             /* Current Interrupt Identifier */
 
-#define AT91_AIC_IPR            (AT91_AIC + 0x10c)      /* Interrupt Pending Register */
-#define AT91_AIC_IMR            (AT91_AIC + 0x110)      /* Interrupt Mask Register */
-#define AT91_AIC_CISR           (AT91_AIC + 0x114)      /* Core Interrupt Status Register */
+#define AT91_AIC_IPR            0x10c                   /* Interrupt Pending Register */
+#define AT91_AIC_IMR            0x110                   /* Interrupt Mask Register */
+#define AT91_AIC_CISR           0x114                   /* Core Interrupt Status Register */
 #define         AT91_AIC_NFIQ           (1 << 0)                /* nFIQ Status */
 #define         AT91_AIC_NIRQ           (1 << 1)                /* nIRQ Status */
 
-#define AT91_AIC_IECR           (AT91_AIC + 0x120)      /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR           (AT91_AIC + 0x124)      /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR           (AT91_AIC + 0x128)      /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR           (AT91_AIC + 0x12c)      /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR          (AT91_AIC + 0x130)      /* End of Interrupt Command Register */
-#define AT91_AIC_SPU            (AT91_AIC + 0x134)      /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR            (AT91_AIC + 0x138)      /* Debug Control Register */
+#define AT91_AIC_IECR           0x120                   /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR           0x124                   /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR           0x128                   /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR           0x12c                   /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR          0x130                   /* End of Interrupt Command Register */
+#define AT91_AIC_SPU            0x134                   /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR            0x138                   /* Debug Control Register */
 #define         AT91_AIC_DCR_PROT       (1 << 0)                /* Protection Mode */
 #define         AT91_AIC_DCR_GMSK       (1 << 1)                /* General Mask */
 
-#define AT91_AIC_FFER           (AT91_AIC + 0x140)      /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR           (AT91_AIC + 0x144)      /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR           (AT91_AIC + 0x148)      /* Fast Forcing Status Register [SAM9 only] */
+#define AT91_AIC_FFER           0x140                   /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR           0x144                   /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR           0x148                   /* Fast Forcing Status Register [SAM9 only] */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index dbfe455a4c41..2aa0c5e13495 100644
--- a/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -19,7 +19,7 @@
 #define dbgu_readl(dbgu, field) \
         __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
 
-#ifdef AT91_DBGU
+#if !defined(CONFIG_ARCH_AT91X40)
 #define AT91_DBGU_CR            (0x00)  /* Control Register */
 #define AT91_DBGU_MR            (0x04)  /* Mode Register */
 #define AT91_DBGU_IER           (0x08)  /* Interrupt Enable Register */
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 974d0bd05b5b..d1f80ad7f4d4 100644
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -16,16 +16,16 @@
 #ifndef AT91_PIT_H
 #define AT91_PIT_H
 
-#define AT91_PIT_MR             (AT91_PIT + 0x00)       /* Mode Register */
+#define AT91_PIT_MR             0x00                    /* Mode Register */
 #define         AT91_PIT_PITIEN         (1 << 25)               /* Timer Interrupt Enable */
 #define         AT91_PIT_PITEN          (1 << 24)               /* Timer Enabled */
 #define         AT91_PIT_PIV            (0xfffff)               /* Periodic Interval Value */
 
-#define AT91_PIT_SR             (AT91_PIT + 0x04)       /* Status Register */
+#define AT91_PIT_SR             0x04                    /* Status Register */
 #define         AT91_PIT_PITS           (1 << 0)                /* Timer Status */
 
-#define AT91_PIT_PIVR           (AT91_PIT + 0x08)       /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR           (AT91_PIT + 0x0c)       /* Periodic Interval Image Register */
+#define AT91_PIT_PIVR           0x08                    /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR           0x0c                    /* Periodic Interval Image Register */
 #define         AT91_PIT_PICNT          (0xfff << 20)           /* Interval Counter */
 #define         AT91_PIT_CPIV           (0xfffff)               /* Inverval Value */
 
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
index e56f4701a3e5..da1945e5f714 100644
--- a/arch/arm/mach-at91/include/mach/at91_rtc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -16,7 +16,7 @@
 #ifndef AT91_RTC_H
 #define AT91_RTC_H
 
-#define AT91_RTC_CR             (AT91_RTC + 0x00)       /* Control Register */
+#define AT91_RTC_CR             0x00                    /* Control Register */
 #define         AT91_RTC_UPDTIM         (1 <<  0)               /* Update Request Time Register */
 #define         AT91_RTC_UPDCAL         (1 <<  1)               /* Update Request Calendar Register */
 #define         AT91_RTC_TIMEVSEL       (3 <<  8)               /* Time Event Selection */
@@ -29,44 +29,44 @@
 #define                 AT91_RTC_CALEVSEL_MONTH         (1 << 16)
 #define                 AT91_RTC_CALEVSEL_YEAR          (2 << 16)
 
-#define AT91_RTC_MR             (AT91_RTC + 0x04)       /* Mode Register */
+#define AT91_RTC_MR             0x04                    /* Mode Register */
 #define                 AT91_RTC_HRMOD          (1 <<  0)               /* 12/24 Hour Mode */
 
-#define AT91_RTC_TIMR           (AT91_RTC + 0x08)       /* Time Register */
+#define AT91_RTC_TIMR           0x08                    /* Time Register */
 #define         AT91_RTC_SEC            (0x7f <<  0)            /* Current Second */
 #define         AT91_RTC_MIN            (0x7f <<  8)            /* Current Minute */
 #define         AT91_RTC_HOUR           (0x3f << 16)            /* Current Hour */
 #define         AT91_RTC_AMPM           (1    << 22)            /* Ante Meridiem Post Meridiem Indicator */
 
-#define AT91_RTC_CALR           (AT91_RTC + 0x0c)       /* Calendar Register */
+#define AT91_RTC_CALR           0x0c                    /* Calendar Register */
 #define         AT91_RTC_CENT           (0x7f <<  0)            /* Current Century */
 #define         AT91_RTC_YEAR           (0xff <<  8)            /* Current Year */
 #define         AT91_RTC_MONTH          (0x1f << 16)            /* Current Month */
 #define         AT91_RTC_DAY            (7    << 21)            /* Current Day */
 #define         AT91_RTC_DATE           (0x3f << 24)            /* Current Date */
 
-#define AT91_RTC_TIMALR         (AT91_RTC + 0x10)       /* Time Alarm Register */
+#define AT91_RTC_TIMALR         0x10                    /* Time Alarm Register */
 #define         AT91_RTC_SECEN          (1 <<  7)               /* Second Alarm Enable */
 #define         AT91_RTC_MINEN          (1 << 15)               /* Minute Alarm Enable */
 #define         AT91_RTC_HOUREN         (1 << 23)               /* Hour Alarm Enable */
 
-#define AT91_RTC_CALALR         (AT91_RTC + 0x14)       /* Calendar Alarm Register */
+#define AT91_RTC_CALALR         0x14                    /* Calendar Alarm Register */
 #define         AT91_RTC_MTHEN          (1 << 23)               /* Month Alarm Enable */
 #define         AT91_RTC_DATEEN         (1 << 31)               /* Date Alarm Enable */
 
-#define AT91_RTC_SR             (AT91_RTC + 0x18)       /* Status Register */
+#define AT91_RTC_SR             0x18                    /* Status Register */
 #define         AT91_RTC_ACKUPD         (1 <<  0)               /* Acknowledge for Update */
 #define         AT91_RTC_ALARM          (1 <<  1)               /* Alarm Flag */
 #define         AT91_RTC_SECEV          (1 <<  2)               /* Second Event */
 #define         AT91_RTC_TIMEV          (1 <<  3)               /* Time Event */
 #define         AT91_RTC_CALEV          (1 <<  4)               /* Calendar Event */
 
-#define AT91_RTC_SCCR           (AT91_RTC + 0x1c)       /* Status Clear Command Register */
-#define AT91_RTC_IER            (AT91_RTC + 0x20)       /* Interrupt Enable Register */
-#define AT91_RTC_IDR            (AT91_RTC + 0x24)       /* Interrupt Disable Register */
-#define AT91_RTC_IMR            (AT91_RTC + 0x28)       /* Interrupt Mask Register */
+#define AT91_RTC_SCCR           0x1c                    /* Status Clear Command Register */
+#define AT91_RTC_IER            0x20                    /* Interrupt Enable Register */
+#define AT91_RTC_IDR            0x24                    /* Interrupt Disable Register */
+#define AT91_RTC_IMR            0x28                    /* Interrupt Mask Register */
 
-#define AT91_RTC_VER            (AT91_RTC + 0x2c)       /* Valid Entry Register */
+#define AT91_RTC_VER            0x2c                    /* Valid Entry Register */
 #define         AT91_RTC_NVTIM          (1 <<  0)               /* Non valid Time */
 #define         AT91_RTC_NVCAL          (1 <<  1)               /* Non valid Calendar */
 #define         AT91_RTC_NVTIMALR       (1 <<  2)               /* Non valid Time Alarm */
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index c4ce07e8a8fa..1d4fe822c77a 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -16,11 +16,21 @@
 #ifndef AT91_SHDWC_H
 #define AT91_SHDWC_H
 
-#define AT91_SHDW_CR            (AT91_SHDWC + 0x00)     /* Shut Down Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_shdwc_base;
+
+#define at91_shdwc_read(field) \
+        __raw_readl(at91_shdwc_base + field)
+
+#define at91_shdwc_write(field, value) \
+        __raw_writel(value, at91_shdwc_base + field);
+#endif
+
+#define AT91_SHDW_CR            0x00                    /* Shut Down Control Register */
 #define         AT91_SHDW_SHDW          (1    << 0)             /* Shut Down command */
 #define         AT91_SHDW_KEY           (0xa5 << 24)            /* KEY Password */
 
-#define AT91_SHDW_MR            (AT91_SHDWC + 0x04)     /* Shut Down Mode Register */
+#define AT91_SHDW_MR            0x04                    /* Shut Down Mode Register */
 #define         AT91_SHDW_WKMODE0       (3 << 0)                /* Wake-up 0 Mode Selection */
 #define                 AT91_SHDW_WKMODE0_NONE          0
 #define                 AT91_SHDW_WKMODE0_HIGH          1
@@ -30,7 +40,7 @@
 #define                 AT91_SHDW_CPTWK0_(x)    ((x) << 4)
 #define         AT91_SHDW_RTTWKEN       (1   << 16)             /* Real Time Timer Wake-up Enable */
 
-#define AT91_SHDW_SR            (AT91_SHDWC + 0x08)     /* Shut Down Status Register */
+#define AT91_SHDW_SR            0x08                    /* Shut Down Status Register */
 #define         AT91_SHDW_WAKEUP0       (1 <<  0)               /* Wake-up 0 Status */
 #define         AT91_SHDW_RTTWK         (1 << 16)               /* Real-time Timer Wake-up */
 #define         AT91_SHDW_RTCWK         (1 << 17)               /* Real-time Clock Wake-up [SAM9RL] */
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index c5df1e8f1955..4c0e2f6011d7 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -79,29 +79,28 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC        (0xffffe200 - AT91_BASE_SYS)
 #define AT91_BCRAMC     (0xffffe400 - AT91_BASE_SYS)
 #define AT91_DDRSDRC0   (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA        (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffff800 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (cpu_is_at91cap9_revB() ?       \
                         (0xfffffd50 - AT91_BASE_SYS) :  \
                         (0xfffffd60 - AT91_BASE_SYS))
 
+#define AT91CAP9_BASE_ECC       0xffffe200
+#define AT91CAP9_BASE_DMA       0xffffec00
+#define AT91CAP9_BASE_SMC       0xffffe800
+#define AT91CAP9_BASE_DBGU      AT91_BASE_DBGU1
+#define AT91CAP9_BASE_PIOA      0xfffff200
+#define AT91CAP9_BASE_PIOB      0xfffff400
+#define AT91CAP9_BASE_PIOC      0xfffff600
+#define AT91CAP9_BASE_PIOD      0xfffff800
+#define AT91CAP9_BASE_SHDWC     0xfffffd10
+#define AT91CAP9_BASE_RTT       0xfffffd20
+#define AT91CAP9_BASE_PIT       0xfffffd30
+#define AT91CAP9_BASE_WDT       0xfffffd40
+
 #define AT91_USART0     AT91CAP9_BASE_US0
 #define AT91_USART1     AT91CAP9_BASE_US1
 #define AT91_USART2     AT91CAP9_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index e4037b500302..bacb51141819 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -79,17 +79,17 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)    /* Advanced Interrupt Controller */
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)    /* Debug Unit */
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)    /* PIO Controller A */
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)    /* PIO Controller B */
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)    /* PIO Controller C */
-#define AT91_PIOD       (0xfffffa00 - AT91_BASE_SYS)    /* PIO Controller D */
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)    /* Power Management Controller */
 #define AT91_ST         (0xfffffd00 - AT91_BASE_SYS)    /* System Timer */
-#define AT91_RTC        (0xfffffe00 - AT91_BASE_SYS)    /* Real-Time Clock */
 #define AT91_MC         (0xffffff00 - AT91_BASE_SYS)    /* Memory Controllers */
 
+#define AT91RM9200_BASE_DBGU    AT91_BASE_DBGU0 /* Debug Unit */
+#define AT91RM9200_BASE_PIOA    0xfffff400      /* PIO Controller A */
+#define AT91RM9200_BASE_PIOB    0xfffff600      /* PIO Controller B */
+#define AT91RM9200_BASE_PIOC    0xfffff800      /* PIO Controller C */
+#define AT91RM9200_BASE_PIOD    0xfffffa00      /* PIO Controller D */
+#define AT91RM9200_BASE_RTC     0xfffffe00      /* Real-Time Clock */
+
 #define AT91_USART0     AT91RM9200_BASE_US0
 #define AT91_USART1     AT91RM9200_BASE_US1
 #define AT91_USART2     AT91RM9200_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 9a791165913f..f937c476bb67 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -80,24 +80,23 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_SDRAMC0    (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd50 - AT91_BASE_SYS)
 
+#define AT91SAM9260_BASE_ECC    0xffffe800
+#define AT91SAM9260_BASE_SMC    0xffffec00
+#define AT91SAM9260_BASE_DBGU   AT91_BASE_DBGU0
+#define AT91SAM9260_BASE_PIOA   0xfffff400
+#define AT91SAM9260_BASE_PIOB   0xfffff600
+#define AT91SAM9260_BASE_PIOC   0xfffff800
+#define AT91SAM9260_BASE_SHDWC  0xfffffd10
+#define AT91SAM9260_BASE_RTT    0xfffffd20
+#define AT91SAM9260_BASE_PIT    0xfffffd30
+#define AT91SAM9260_BASE_WDT    0xfffffd40
+
 #define AT91_USART0     AT91SAM9260_BASE_US0
 #define AT91_USART1     AT91SAM9260_BASE_US1
 #define AT91_USART2     AT91SAM9260_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index ce596204cefa..175604e261be 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -66,21 +66,21 @@
  * System Peripherals (offset from AT91_BASE_SYS)
  */
 #define AT91_SDRAMC0    (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd50 - AT91_BASE_SYS)
 
+#define AT91SAM9261_BASE_SMC    0xffffec00
+#define AT91SAM9261_BASE_DBGU   AT91_BASE_DBGU0
+#define AT91SAM9261_BASE_PIOA   0xfffff400
+#define AT91SAM9261_BASE_PIOB   0xfffff600
+#define AT91SAM9261_BASE_PIOC   0xfffff800
+#define AT91SAM9261_BASE_SHDWC  0xfffffd10
+#define AT91SAM9261_BASE_RTT    0xfffffd20
+#define AT91SAM9261_BASE_PIT    0xfffffd30
+#define AT91SAM9261_BASE_WDT    0xfffffd40
+
 #define AT91_USART0     AT91SAM9261_BASE_US0
 #define AT91_USART1     AT91SAM9261_BASE_US1
 #define AT91_USART2     AT91SAM9261_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index f1b92961a2b1..80c915002d83 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -74,30 +74,29 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC0       (0xffffe000 - AT91_BASE_SYS)
 #define AT91_SDRAMC0    (0xffffe200 - AT91_BASE_SYS)
-#define AT91_SMC0       (0xffffe400 - AT91_BASE_SYS)
-#define AT91_ECC1       (0xffffe600 - AT91_BASE_SYS)
 #define AT91_SDRAMC1    (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SMC1       (0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffec00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffed10 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE       (0xfffffa00 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT0       (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_RTT1       (0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd60 - AT91_BASE_SYS)
 
+#define AT91SAM9263_BASE_ECC0   0xffffe000
+#define AT91SAM9263_BASE_SMC0   0xffffe400
+#define AT91SAM9263_BASE_ECC1   0xffffe600
+#define AT91SAM9263_BASE_SMC1   0xffffea00
+#define AT91SAM9263_BASE_DBGU   AT91_BASE_DBGU1
+#define AT91SAM9263_BASE_PIOA   0xfffff200
+#define AT91SAM9263_BASE_PIOB   0xfffff400
+#define AT91SAM9263_BASE_PIOC   0xfffff600
+#define AT91SAM9263_BASE_PIOD   0xfffff800
+#define AT91SAM9263_BASE_PIOE   0xfffffa00
+#define AT91SAM9263_BASE_SHDWC  0xfffffd10
+#define AT91SAM9263_BASE_RTT0   0xfffffd20
+#define AT91SAM9263_BASE_PIT    0xfffffd30
+#define AT91SAM9263_BASE_WDT    0xfffffd40
+#define AT91SAM9263_BASE_RTT1   0xfffffd50
+
 #define AT91_USART0     AT91SAM9263_BASE_US0
 #define AT91_USART1     AT91SAM9263_BASE_US1
 #define AT91_USART2     AT91SAM9263_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index 57de6207e57e..eb18a70fa647 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -16,7 +16,9 @@
 #ifndef AT91SAM9_SMC_H
 #define AT91SAM9_SMC_H
 
-#define AT91_SMC_SETUP(n)       (AT91_SMC + 0x00 + ((n)*0x10))  /* Setup Register for CS n */
+#include <mach/cpu.h>
+
+#define AT91_SMC_SETUP          0x00                            /* Setup Register for CS n */
 #define         AT91_SMC_NWESETUP       (0x3f << 0)                     /* NWE Setup Length */
 #define                 AT91_SMC_NWESETUP_(x)   ((x) << 0)
 #define         AT91_SMC_NCS_WRSETUP    (0x3f << 8)                     /* NCS Setup Length in Write Access */
@@ -26,7 +28,7 @@
 #define         AT91_SMC_NCS_RDSETUP    (0x3f << 24)                    /* NCS Setup Length in Read Access */
 #define                 AT91_SMC_NCS_RDSETUP_(x)        ((x) << 24)
 
-#define AT91_SMC_PULSE(n)       (AT91_SMC + 0x04 + ((n)*0x10))  /* Pulse Register for CS n */
+#define AT91_SMC_PULSE          0x04                            /* Pulse Register for CS n */
 #define         AT91_SMC_NWEPULSE       (0x7f <<  0)                    /* NWE Pulse Length */
 #define                 AT91_SMC_NWEPULSE_(x)   ((x) << 0)
 #define         AT91_SMC_NCS_WRPULSE    (0x7f <<  8)                    /* NCS Pulse Length in Write Access */
@@ -36,13 +38,13 @@
 #define         AT91_SMC_NCS_RDPULSE    (0x7f << 24)                    /* NCS Pulse Length in Read Access */
 #define                 AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
 
-#define AT91_SMC_CYCLE(n)       (AT91_SMC + 0x08 + ((n)*0x10))  /* Cycle Register for CS n */
+#define AT91_SMC_CYCLE          0x08                            /* Cycle Register for CS n */
 #define         AT91_SMC_NWECYCLE       (0x1ff << 0 )                   /* Total Write Cycle Length */
 #define                 AT91_SMC_NWECYCLE_(x)   ((x) << 0)
 #define         AT91_SMC_NRDCYCLE       (0x1ff << 16)                   /* Total Read Cycle Length */
 #define                 AT91_SMC_NRDCYCLE_(x)   ((x) << 16)
 
-#define AT91_SMC_MODE(n)        (AT91_SMC + 0x0c + ((n)*0x10))  /* Mode Register for CS n */
+#define AT91_SMC_MODE           0x0c                            /* Mode Register for CS n */
 #define         AT91_SMC_READMODE       (1 <<  0)                       /* Read Mode */
 #define         AT91_SMC_WRITEMODE      (1 <<  1)                       /* Write Mode */
 #define         AT91_SMC_EXNWMODE       (3 <<  4)                       /* NWAIT Mode */
@@ -66,11 +68,4 @@
 #define                 AT91_SMC_PS_16                  (2 << 28)
 #define                 AT91_SMC_PS_32                  (3 << 28)
 
-#if defined(AT91_SMC1)          /* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)      (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)      (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)      (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)       (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#endif
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 406bb6496805..f0c23c960dec 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -86,27 +86,27 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC        (0xffffe200 - AT91_BASE_SYS)
 #define AT91_DDRSDRC1   (0xffffe400 - AT91_BASE_SYS)
 #define AT91_DDRSDRC0   (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffea00 - AT91_BASE_SYS)
-#define AT91_DMA        (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE       (0xfffffa00 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC        (0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91SAM9G45_BASE_ECC    0xffffe200
+#define AT91SAM9G45_BASE_DMA    0xffffec00
+#define AT91SAM9G45_BASE_SMC    0xffffe800
+#define AT91SAM9G45_BASE_DBGU   AT91_BASE_DBGU1
+#define AT91SAM9G45_BASE_PIOA   0xfffff200
+#define AT91SAM9G45_BASE_PIOB   0xfffff400
+#define AT91SAM9G45_BASE_PIOC   0xfffff600
+#define AT91SAM9G45_BASE_PIOD   0xfffff800
+#define AT91SAM9G45_BASE_PIOE   0xfffffa00
+#define AT91SAM9G45_BASE_SHDWC  0xfffffd10
+#define AT91SAM9G45_BASE_RTT    0xfffffd20
+#define AT91SAM9G45_BASE_PIT    0xfffffd30
+#define AT91SAM9G45_BASE_WDT    0xfffffd40
+#define AT91SAM9G45_BASE_RTC    0xfffffdb0
 
 #define AT91_USART0     AT91SAM9G45_BASE_US0
 #define AT91_USART1     AT91SAM9G45_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 1aabacd315d4..2bb359e60b97 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -69,27 +69,26 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_DMA        (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_SDRAMC0    (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffffa00 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_SCKCR      (0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC        (0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91SAM9RL_BASE_DMA     0xffffe600
+#define AT91SAM9RL_BASE_ECC     0xffffe800
+#define AT91SAM9RL_BASE_SMC     0xffffec00
+#define AT91SAM9RL_BASE_DBGU    AT91_BASE_DBGU0
+#define AT91SAM9RL_BASE_PIOA    0xfffff400
+#define AT91SAM9RL_BASE_PIOB    0xfffff600
+#define AT91SAM9RL_BASE_PIOC    0xfffff800
+#define AT91SAM9RL_BASE_PIOD    0xfffffa00
+#define AT91SAM9RL_BASE_SHDWC   0xfffffd10
+#define AT91SAM9RL_BASE_RTT     0xfffffd20
+#define AT91SAM9RL_BASE_PIT     0xfffffd30
+#define AT91SAM9RL_BASE_WDT     0xfffffd40
+#define AT91SAM9RL_BASE_RTC     0xfffffe00
 
 #define AT91_USART0     AT91SAM9RL_BASE_US0
 #define AT91_USART1     AT91SAM9RL_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index a152ff87e688..a57829f4fd18 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -40,7 +40,6 @@
 #define AT91_PIOA       (0xffff0000 - AT91_BASE_SYS)    /* PIO Controller A */
 #define AT91_PS         (0xffff4000 - AT91_BASE_SYS)    /* Power Save */
 #define AT91_WD         (0xffff8000 - AT91_BASE_SYS)    /* Watchdog Timer */
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)    /* Advanced Interrupt Controller */
 
 /*
  * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index eac92e995bb5..d0b377b21bd7 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -40,13 +40,14 @@
 #include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
 #include <linux/serial.h>
+#include <linux/platform_data/macb.h>
 
  /* USB Device */
 struct at91_udc_data {
-        u8      vbus_pin;               /* high == host powering us */
+        int     vbus_pin;               /* high == host powering us */
         u8      vbus_active_low;        /* vbus polarity */
         u8      vbus_polled;            /* Use polling, not interrupt */
-        u8      pullup_pin;             /* active == D+ pulled up */
+        int     pullup_pin;             /* active == D+ pulled up */
         u8      pullup_active_low;      /* true == pullup_pin is active low */
 };
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
@@ -56,10 +57,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data);
 
  /* Compact Flash */
 struct at91_cf_data {
-        u8      irq_pin;                /* I/O IRQ */
-        u8      det_pin;                /* Card detect */
-        u8      vcc_pin;                /* power switching */
-        u8      rst_pin;                /* card reset */
+        int     irq_pin;                /* I/O IRQ */
+        int     det_pin;                /* Card detect */
+        int     vcc_pin;                /* power switching */
+        int     rst_pin;                /* card reset */
         u8      chipselect;             /* EBI Chip Select number */
         u8      flags;
 #define AT91_CF_TRUE_IDE        0x01
@@ -70,37 +71,26 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data);
  /* MMC / SD */
   /* at91_mci platform config */
 struct at91_mmc_data {
-        u8              det_pin;        /* card detect IRQ */
+        int             det_pin;        /* card detect IRQ */
         unsigned        slot_b:1;       /* uses Slot B */
         unsigned        wire4:1;        /* (SD) supports DAT0..DAT3 */
-        u8              wp_pin;         /* (SD) writeprotect detect */
-        u8              vcc_pin;        /* power switching (high == on) */
+        int             wp_pin;         /* (SD) writeprotect detect */
+        int             vcc_pin;        /* power switching (high == on) */
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
   /* atmel-mci platform config */
 extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
 
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
-        u32             phy_mask;
-        u8              phy_irq_pin;    /* PHY IRQ */
-        u8              is_rmii;        /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
-        || defined(CONFIG_ARCH_AT91SAM9G45)
-#define eth_platform_data       at91_eth_data
-#endif
+extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
 struct at91_usbh_data {
         u8              ports;          /* number of ports on root hub */
-        u8              vbus_pin[2];    /* port power-control pin */
+        int             vbus_pin[2];    /* port power-control pin */
         u8              vbus_pin_inverted;
         u8              overcurrent_supported;
-        u8              overcurrent_pin[2];
+        int             overcurrent_pin[2];
         u8              overcurrent_status[2];
         u8              overcurrent_changed[2];
 };
@@ -110,9 +100,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
-        u8              enable_pin;     /* chip enable */
-        u8              det_pin;        /* card detect */
-        u8              rdy_pin;        /* ready/busy */
+        int             enable_pin;     /* chip enable */
+        int             det_pin;        /* card detect */
+        int             rdy_pin;        /* ready/busy */
         u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
         u8              ale;            /* address line number connected to ALE */
         u8              cle;            /* address line number connected to CLE */
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 0ed8648c6452..c6bb9e2d9baa 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,9 +14,15 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
+#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
+#define AT91_DBGU AT91_BASE_DBGU0
+#else
+#define AT91_DBGU AT91_BASE_DBGU1
+#endif
+
         .macro  addruart, rp, rv, tmp
-        ldr     \rp, =(AT91_BASE_SYS + AT91_DBGU)       @ System peripherals (phys address)
-        ldr     \rv, =(AT91_VA_BASE_SYS + AT91_DBGU)    @ System peripherals (virt address)
+        ldr     \rp, =AT91_DBGU                         @ System peripherals (phys address)
+        ldr     \rv, =AT91_IO_P2V(AT91_DBGU)            @ System peripherals (virt address)
         .endm
 
         .macro  senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 7ab68f972227..423eea0ed74c 100644
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -17,16 +17,17 @@
         .endm
 
         .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =(AT91_VA_BASE_SYS + AT91_AIC)           @ base virtual address of AIC peripheral
+        ldr     \base, =at91_aic_base           @ base virtual address of AIC peripheral
+        ldr     \base, [\base]
         .endm
 
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
 
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        ldr     \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]     @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-        ldr     \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]   @ read interrupt source number
-        teq     \irqstat, #0                                    @ ISR is 0 when no current interrupt, or spurious interrupt
-        streq   \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]     @ not going to be handled further, then ACK it now.
+        ldr     \irqnr, [\base, #AT91_AIC_IVR]          @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+        ldr     \irqstat, [\base, #AT91_AIC_ISR]        @ read interrupt source number
+        teq     \irqstat, #0                            @ ISR is 0 when no current interrupt, or spurious interrupt
+        streq   \tmp, [\base, #AT91_AIC_EOICR]          @ not going to be handled further, then ACK it now.
         .endm
 
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 2b9a1f51210f..e3fd225121c7 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -16,177 +16,175 @@
 #include <linux/kernel.h>
 #include <asm/irq.h>
 
-#define PIN_BASE                NR_AIC_IRQS
-
 #define MAX_GPIO_BANKS          5
-#define NR_BUILTIN_GPIO         (PIN_BASE + (MAX_GPIO_BANKS * 32))
+#define NR_BUILTIN_GPIO         (MAX_GPIO_BANKS * 32)
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
-#define AT91_PIN_PA0    (PIN_BASE + 0x00 + 0)
-#define AT91_PIN_PA1    (PIN_BASE + 0x00 + 1)
-#define AT91_PIN_PA2    (PIN_BASE + 0x00 + 2)
-#define AT91_PIN_PA3    (PIN_BASE + 0x00 + 3)
-#define AT91_PIN_PA4    (PIN_BASE + 0x00 + 4)
-#define AT91_PIN_PA5    (PIN_BASE + 0x00 + 5)
-#define AT91_PIN_PA6    (PIN_BASE + 0x00 + 6)
-#define AT91_PIN_PA7    (PIN_BASE + 0x00 + 7)
-#define AT91_PIN_PA8    (PIN_BASE + 0x00 + 8)
-#define AT91_PIN_PA9    (PIN_BASE + 0x00 + 9)
-#define AT91_PIN_PA10   (PIN_BASE + 0x00 + 10)
-#define AT91_PIN_PA11   (PIN_BASE + 0x00 + 11)
-#define AT91_PIN_PA12   (PIN_BASE + 0x00 + 12)
-#define AT91_PIN_PA13   (PIN_BASE + 0x00 + 13)
-#define AT91_PIN_PA14   (PIN_BASE + 0x00 + 14)
-#define AT91_PIN_PA15   (PIN_BASE + 0x00 + 15)
-#define AT91_PIN_PA16   (PIN_BASE + 0x00 + 16)
-#define AT91_PIN_PA17   (PIN_BASE + 0x00 + 17)
-#define AT91_PIN_PA18   (PIN_BASE + 0x00 + 18)
-#define AT91_PIN_PA19   (PIN_BASE + 0x00 + 19)
-#define AT91_PIN_PA20   (PIN_BASE + 0x00 + 20)
-#define AT91_PIN_PA21   (PIN_BASE + 0x00 + 21)
-#define AT91_PIN_PA22   (PIN_BASE + 0x00 + 22)
-#define AT91_PIN_PA23   (PIN_BASE + 0x00 + 23)
-#define AT91_PIN_PA24   (PIN_BASE + 0x00 + 24)
-#define AT91_PIN_PA25   (PIN_BASE + 0x00 + 25)
-#define AT91_PIN_PA26   (PIN_BASE + 0x00 + 26)
-#define AT91_PIN_PA27   (PIN_BASE + 0x00 + 27)
-#define AT91_PIN_PA28   (PIN_BASE + 0x00 + 28)
-#define AT91_PIN_PA29   (PIN_BASE + 0x00 + 29)
-#define AT91_PIN_PA30   (PIN_BASE + 0x00 + 30)
-#define AT91_PIN_PA31   (PIN_BASE + 0x00 + 31)
-
-#define AT91_PIN_PB0    (PIN_BASE + 0x20 + 0)
-#define AT91_PIN_PB1    (PIN_BASE + 0x20 + 1)
-#define AT91_PIN_PB2    (PIN_BASE + 0x20 + 2)
-#define AT91_PIN_PB3    (PIN_BASE + 0x20 + 3)
-#define AT91_PIN_PB4    (PIN_BASE + 0x20 + 4)
-#define AT91_PIN_PB5    (PIN_BASE + 0x20 + 5)
-#define AT91_PIN_PB6    (PIN_BASE + 0x20 + 6)
-#define AT91_PIN_PB7    (PIN_BASE + 0x20 + 7)
-#define AT91_PIN_PB8    (PIN_BASE + 0x20 + 8)
-#define AT91_PIN_PB9    (PIN_BASE + 0x20 + 9)
-#define AT91_PIN_PB10   (PIN_BASE + 0x20 + 10)
-#define AT91_PIN_PB11   (PIN_BASE + 0x20 + 11)
-#define AT91_PIN_PB12   (PIN_BASE + 0x20 + 12)
-#define AT91_PIN_PB13   (PIN_BASE + 0x20 + 13)
-#define AT91_PIN_PB14   (PIN_BASE + 0x20 + 14)
-#define AT91_PIN_PB15   (PIN_BASE + 0x20 + 15)
-#define AT91_PIN_PB16   (PIN_BASE + 0x20 + 16)
-#define AT91_PIN_PB17   (PIN_BASE + 0x20 + 17)
-#define AT91_PIN_PB18   (PIN_BASE + 0x20 + 18)
-#define AT91_PIN_PB19   (PIN_BASE + 0x20 + 19)
-#define AT91_PIN_PB20   (PIN_BASE + 0x20 + 20)
-#define AT91_PIN_PB21   (PIN_BASE + 0x20 + 21)
-#define AT91_PIN_PB22   (PIN_BASE + 0x20 + 22)
-#define AT91_PIN_PB23   (PIN_BASE + 0x20 + 23)
-#define AT91_PIN_PB24   (PIN_BASE + 0x20 + 24)
-#define AT91_PIN_PB25   (PIN_BASE + 0x20 + 25)
-#define AT91_PIN_PB26   (PIN_BASE + 0x20 + 26)
-#define AT91_PIN_PB27   (PIN_BASE + 0x20 + 27)
-#define AT91_PIN_PB28   (PIN_BASE + 0x20 + 28)
-#define AT91_PIN_PB29   (PIN_BASE + 0x20 + 29)
-#define AT91_PIN_PB30   (PIN_BASE + 0x20 + 30)
-#define AT91_PIN_PB31   (PIN_BASE + 0x20 + 31)
-
-#define AT91_PIN_PC0    (PIN_BASE + 0x40 + 0)
-#define AT91_PIN_PC1    (PIN_BASE + 0x40 + 1)
-#define AT91_PIN_PC2    (PIN_BASE + 0x40 + 2)
-#define AT91_PIN_PC3    (PIN_BASE + 0x40 + 3)
-#define AT91_PIN_PC4    (PIN_BASE + 0x40 + 4)
-#define AT91_PIN_PC5    (PIN_BASE + 0x40 + 5)
-#define AT91_PIN_PC6    (PIN_BASE + 0x40 + 6)
-#define AT91_PIN_PC7    (PIN_BASE + 0x40 + 7)
-#define AT91_PIN_PC8    (PIN_BASE + 0x40 + 8)
-#define AT91_PIN_PC9    (PIN_BASE + 0x40 + 9)
-#define AT91_PIN_PC10   (PIN_BASE + 0x40 + 10)
-#define AT91_PIN_PC11   (PIN_BASE + 0x40 + 11)
-#define AT91_PIN_PC12   (PIN_BASE + 0x40 + 12)
-#define AT91_PIN_PC13   (PIN_BASE + 0x40 + 13)
-#define AT91_PIN_PC14   (PIN_BASE + 0x40 + 14)
-#define AT91_PIN_PC15   (PIN_BASE + 0x40 + 15)
-#define AT91_PIN_PC16   (PIN_BASE + 0x40 + 16)
-#define AT91_PIN_PC17   (PIN_BASE + 0x40 + 17)
-#define AT91_PIN_PC18   (PIN_BASE + 0x40 + 18)
-#define AT91_PIN_PC19   (PIN_BASE + 0x40 + 19)
-#define AT91_PIN_PC20   (PIN_BASE + 0x40 + 20)
-#define AT91_PIN_PC21   (PIN_BASE + 0x40 + 21)
-#define AT91_PIN_PC22   (PIN_BASE + 0x40 + 22)
-#define AT91_PIN_PC23   (PIN_BASE + 0x40 + 23)
-#define AT91_PIN_PC24   (PIN_BASE + 0x40 + 24)
-#define AT91_PIN_PC25   (PIN_BASE + 0x40 + 25)
-#define AT91_PIN_PC26   (PIN_BASE + 0x40 + 26)
-#define AT91_PIN_PC27   (PIN_BASE + 0x40 + 27)
-#define AT91_PIN_PC28   (PIN_BASE + 0x40 + 28)
-#define AT91_PIN_PC29   (PIN_BASE + 0x40 + 29)
-#define AT91_PIN_PC30   (PIN_BASE + 0x40 + 30)
-#define AT91_PIN_PC31   (PIN_BASE + 0x40 + 31)
-
-#define AT91_PIN_PD0    (PIN_BASE + 0x60 + 0)
-#define AT91_PIN_PD1    (PIN_BASE + 0x60 + 1)
-#define AT91_PIN_PD2    (PIN_BASE + 0x60 + 2)
-#define AT91_PIN_PD3    (PIN_BASE + 0x60 + 3)
-#define AT91_PIN_PD4    (PIN_BASE + 0x60 + 4)
-#define AT91_PIN_PD5    (PIN_BASE + 0x60 + 5)
-#define AT91_PIN_PD6    (PIN_BASE + 0x60 + 6)
-#define AT91_PIN_PD7    (PIN_BASE + 0x60 + 7)
-#define AT91_PIN_PD8    (PIN_BASE + 0x60 + 8)
-#define AT91_PIN_PD9    (PIN_BASE + 0x60 + 9)
-#define AT91_PIN_PD10   (PIN_BASE + 0x60 + 10)
-#define AT91_PIN_PD11   (PIN_BASE + 0x60 + 11)
-#define AT91_PIN_PD12   (PIN_BASE + 0x60 + 12)
-#define AT91_PIN_PD13   (PIN_BASE + 0x60 + 13)
-#define AT91_PIN_PD14   (PIN_BASE + 0x60 + 14)
-#define AT91_PIN_PD15   (PIN_BASE + 0x60 + 15)
-#define AT91_PIN_PD16   (PIN_BASE + 0x60 + 16)
-#define AT91_PIN_PD17   (PIN_BASE + 0x60 + 17)
-#define AT91_PIN_PD18   (PIN_BASE + 0x60 + 18)
-#define AT91_PIN_PD19   (PIN_BASE + 0x60 + 19)
-#define AT91_PIN_PD20   (PIN_BASE + 0x60 + 20)
-#define AT91_PIN_PD21   (PIN_BASE + 0x60 + 21)
-#define AT91_PIN_PD22   (PIN_BASE + 0x60 + 22)
-#define AT91_PIN_PD23   (PIN_BASE + 0x60 + 23)
-#define AT91_PIN_PD24   (PIN_BASE + 0x60 + 24)
-#define AT91_PIN_PD25   (PIN_BASE + 0x60 + 25)
-#define AT91_PIN_PD26   (PIN_BASE + 0x60 + 26)
-#define AT91_PIN_PD27   (PIN_BASE + 0x60 + 27)
-#define AT91_PIN_PD28   (PIN_BASE + 0x60 + 28)
-#define AT91_PIN_PD29   (PIN_BASE + 0x60 + 29)
-#define AT91_PIN_PD30   (PIN_BASE + 0x60 + 30)
-#define AT91_PIN_PD31   (PIN_BASE + 0x60 + 31)
-
-#define AT91_PIN_PE0    (PIN_BASE + 0x80 + 0)
-#define AT91_PIN_PE1    (PIN_BASE + 0x80 + 1)
-#define AT91_PIN_PE2    (PIN_BASE + 0x80 + 2)
-#define AT91_PIN_PE3    (PIN_BASE + 0x80 + 3)
-#define AT91_PIN_PE4    (PIN_BASE + 0x80 + 4)
-#define AT91_PIN_PE5    (PIN_BASE + 0x80 + 5)
-#define AT91_PIN_PE6    (PIN_BASE + 0x80 + 6)
-#define AT91_PIN_PE7    (PIN_BASE + 0x80 + 7)
-#define AT91_PIN_PE8    (PIN_BASE + 0x80 + 8)
-#define AT91_PIN_PE9    (PIN_BASE + 0x80 + 9)
-#define AT91_PIN_PE10   (PIN_BASE + 0x80 + 10)
-#define AT91_PIN_PE11   (PIN_BASE + 0x80 + 11)
-#define AT91_PIN_PE12   (PIN_BASE + 0x80 + 12)
-#define AT91_PIN_PE13   (PIN_BASE + 0x80 + 13)
-#define AT91_PIN_PE14   (PIN_BASE + 0x80 + 14)
-#define AT91_PIN_PE15   (PIN_BASE + 0x80 + 15)
-#define AT91_PIN_PE16   (PIN_BASE + 0x80 + 16)
-#define AT91_PIN_PE17   (PIN_BASE + 0x80 + 17)
-#define AT91_PIN_PE18   (PIN_BASE + 0x80 + 18)
-#define AT91_PIN_PE19   (PIN_BASE + 0x80 + 19)
-#define AT91_PIN_PE20   (PIN_BASE + 0x80 + 20)
-#define AT91_PIN_PE21   (PIN_BASE + 0x80 + 21)
-#define AT91_PIN_PE22   (PIN_BASE + 0x80 + 22)
-#define AT91_PIN_PE23   (PIN_BASE + 0x80 + 23)
-#define AT91_PIN_PE24   (PIN_BASE + 0x80 + 24)
-#define AT91_PIN_PE25   (PIN_BASE + 0x80 + 25)
-#define AT91_PIN_PE26   (PIN_BASE + 0x80 + 26)
-#define AT91_PIN_PE27   (PIN_BASE + 0x80 + 27)
-#define AT91_PIN_PE28   (PIN_BASE + 0x80 + 28)
-#define AT91_PIN_PE29   (PIN_BASE + 0x80 + 29)
-#define AT91_PIN_PE30   (PIN_BASE + 0x80 + 30)
-#define AT91_PIN_PE31   (PIN_BASE + 0x80 + 31)
+#define AT91_PIN_PA0    (0x00 + 0)
+#define AT91_PIN_PA1    (0x00 + 1)
+#define AT91_PIN_PA2    (0x00 + 2)
+#define AT91_PIN_PA3    (0x00 + 3)
+#define AT91_PIN_PA4    (0x00 + 4)
+#define AT91_PIN_PA5    (0x00 + 5)
+#define AT91_PIN_PA6    (0x00 + 6)
+#define AT91_PIN_PA7    (0x00 + 7)
+#define AT91_PIN_PA8    (0x00 + 8)
+#define AT91_PIN_PA9    (0x00 + 9)
+#define AT91_PIN_PA10   (0x00 + 10)
+#define AT91_PIN_PA11   (0x00 + 11)
+#define AT91_PIN_PA12   (0x00 + 12)
+#define AT91_PIN_PA13   (0x00 + 13)
+#define AT91_PIN_PA14   (0x00 + 14)
+#define AT91_PIN_PA15   (0x00 + 15)
+#define AT91_PIN_PA16   (0x00 + 16)
+#define AT91_PIN_PA17   (0x00 + 17)
+#define AT91_PIN_PA18   (0x00 + 18)
+#define AT91_PIN_PA19   (0x00 + 19)
+#define AT91_PIN_PA20   (0x00 + 20)
+#define AT91_PIN_PA21   (0x00 + 21)
+#define AT91_PIN_PA22   (0x00 + 22)
+#define AT91_PIN_PA23   (0x00 + 23)
+#define AT91_PIN_PA24   (0x00 + 24)
+#define AT91_PIN_PA25   (0x00 + 25)
+#define AT91_PIN_PA26   (0x00 + 26)
+#define AT91_PIN_PA27   (0x00 + 27)
+#define AT91_PIN_PA28   (0x00 + 28)
+#define AT91_PIN_PA29   (0x00 + 29)
+#define AT91_PIN_PA30   (0x00 + 30)
+#define AT91_PIN_PA31   (0x00 + 31)
+
+#define AT91_PIN_PB0    (0x20 + 0)
+#define AT91_PIN_PB1    (0x20 + 1)
+#define AT91_PIN_PB2    (0x20 + 2)
+#define AT91_PIN_PB3    (0x20 + 3)
+#define AT91_PIN_PB4    (0x20 + 4)
+#define AT91_PIN_PB5    (0x20 + 5)
+#define AT91_PIN_PB6    (0x20 + 6)
+#define AT91_PIN_PB7    (0x20 + 7)
+#define AT91_PIN_PB8    (0x20 + 8)
+#define AT91_PIN_PB9    (0x20 + 9)
+#define AT91_PIN_PB10   (0x20 + 10)
+#define AT91_PIN_PB11   (0x20 + 11)
+#define AT91_PIN_PB12   (0x20 + 12)
+#define AT91_PIN_PB13   (0x20 + 13)
+#define AT91_PIN_PB14   (0x20 + 14)
+#define AT91_PIN_PB15   (0x20 + 15)
+#define AT91_PIN_PB16   (0x20 + 16)
+#define AT91_PIN_PB17   (0x20 + 17)
+#define AT91_PIN_PB18   (0x20 + 18)
+#define AT91_PIN_PB19   (0x20 + 19)
+#define AT91_PIN_PB20   (0x20 + 20)
+#define AT91_PIN_PB21   (0x20 + 21)
+#define AT91_PIN_PB22   (0x20 + 22)
+#define AT91_PIN_PB23   (0x20 + 23)
+#define AT91_PIN_PB24   (0x20 + 24)
+#define AT91_PIN_PB25   (0x20 + 25)
+#define AT91_PIN_PB26   (0x20 + 26)
+#define AT91_PIN_PB27   (0x20 + 27)
+#define AT91_PIN_PB28   (0x20 + 28)
+#define AT91_PIN_PB29   (0x20 + 29)
+#define AT91_PIN_PB30   (0x20 + 30)
+#define AT91_PIN_PB31   (0x20 + 31)
+
+#define AT91_PIN_PC0    (0x40 + 0)
+#define AT91_PIN_PC1    (0x40 + 1)
+#define AT91_PIN_PC2    (0x40 + 2)
+#define AT91_PIN_PC3    (0x40 + 3)
+#define AT91_PIN_PC4    (0x40 + 4)
+#define AT91_PIN_PC5    (0x40 + 5)
+#define AT91_PIN_PC6    (0x40 + 6)
+#define AT91_PIN_PC7    (0x40 + 7)
+#define AT91_PIN_PC8    (0x40 + 8)
+#define AT91_PIN_PC9    (0x40 + 9)
+#define AT91_PIN_PC10   (0x40 + 10)
+#define AT91_PIN_PC11   (0x40 + 11)
+#define AT91_PIN_PC12   (0x40 + 12)
+#define AT91_PIN_PC13   (0x40 + 13)
+#define AT91_PIN_PC14   (0x40 + 14)
+#define AT91_PIN_PC15   (0x40 + 15)
+#define AT91_PIN_PC16   (0x40 + 16)
+#define AT91_PIN_PC17   (0x40 + 17)
+#define AT91_PIN_PC18   (0x40 + 18)
+#define AT91_PIN_PC19   (0x40 + 19)
+#define AT91_PIN_PC20   (0x40 + 20)
+#define AT91_PIN_PC21   (0x40 + 21)
+#define AT91_PIN_PC22   (0x40 + 22)
+#define AT91_PIN_PC23   (0x40 + 23)
+#define AT91_PIN_PC24   (0x40 + 24)
+#define AT91_PIN_PC25   (0x40 + 25)
+#define AT91_PIN_PC26   (0x40 + 26)
+#define AT91_PIN_PC27   (0x40 + 27)
+#define AT91_PIN_PC28   (0x40 + 28)
+#define AT91_PIN_PC29   (0x40 + 29)
+#define AT91_PIN_PC30   (0x40 + 30)
+#define AT91_PIN_PC31   (0x40 + 31)
+
+#define AT91_PIN_PD0    (0x60 + 0)
+#define AT91_PIN_PD1    (0x60 + 1)
+#define AT91_PIN_PD2    (0x60 + 2)
+#define AT91_PIN_PD3    (0x60 + 3)
+#define AT91_PIN_PD4    (0x60 + 4)
+#define AT91_PIN_PD5    (0x60 + 5)
+#define AT91_PIN_PD6    (0x60 + 6)
+#define AT91_PIN_PD7    (0x60 + 7)
+#define AT91_PIN_PD8    (0x60 + 8)
+#define AT91_PIN_PD9    (0x60 + 9)
+#define AT91_PIN_PD10   (0x60 + 10)
+#define AT91_PIN_PD11   (0x60 + 11)
+#define AT91_PIN_PD12   (0x60 + 12)
+#define AT91_PIN_PD13   (0x60 + 13)
+#define AT91_PIN_PD14   (0x60 + 14)
+#define AT91_PIN_PD15   (0x60 + 15)
+#define AT91_PIN_PD16   (0x60 + 16)
+#define AT91_PIN_PD17   (0x60 + 17)
+#define AT91_PIN_PD18   (0x60 + 18)
+#define AT91_PIN_PD19   (0x60 + 19)
+#define AT91_PIN_PD20   (0x60 + 20)
+#define AT91_PIN_PD21   (0x60 + 21)
+#define AT91_PIN_PD22   (0x60 + 22)
+#define AT91_PIN_PD23   (0x60 + 23)
+#define AT91_PIN_PD24   (0x60 + 24)
+#define AT91_PIN_PD25   (0x60 + 25)
+#define AT91_PIN_PD26   (0x60 + 26)
+#define AT91_PIN_PD27   (0x60 + 27)
+#define AT91_PIN_PD28   (0x60 + 28)
+#define AT91_PIN_PD29   (0x60 + 29)
+#define AT91_PIN_PD30   (0x60 + 30)
+#define AT91_PIN_PD31   (0x60 + 31)
+
+#define AT91_PIN_PE0    (0x80 + 0)
+#define AT91_PIN_PE1    (0x80 + 1)
+#define AT91_PIN_PE2    (0x80 + 2)
+#define AT91_PIN_PE3    (0x80 + 3)
+#define AT91_PIN_PE4    (0x80 + 4)
+#define AT91_PIN_PE5    (0x80 + 5)
+#define AT91_PIN_PE6    (0x80 + 6)
+#define AT91_PIN_PE7    (0x80 + 7)
+#define AT91_PIN_PE8    (0x80 + 8)
+#define AT91_PIN_PE9    (0x80 + 9)
+#define AT91_PIN_PE10   (0x80 + 10)
+#define AT91_PIN_PE11   (0x80 + 11)
+#define AT91_PIN_PE12   (0x80 + 12)
+#define AT91_PIN_PE13   (0x80 + 13)
+#define AT91_PIN_PE14   (0x80 + 14)
+#define AT91_PIN_PE15   (0x80 + 15)
+#define AT91_PIN_PE16   (0x80 + 16)
+#define AT91_PIN_PE17   (0x80 + 17)
+#define AT91_PIN_PE18   (0x80 + 18)
+#define AT91_PIN_PE19   (0x80 + 19)
+#define AT91_PIN_PE20   (0x80 + 20)
+#define AT91_PIN_PE21   (0x80 + 21)
+#define AT91_PIN_PE22   (0x80 + 22)
+#define AT91_PIN_PE23   (0x80 + 23)
+#define AT91_PIN_PE24   (0x80 + 24)
+#define AT91_PIN_PE25   (0x80 + 25)
+#define AT91_PIN_PE26   (0x80 + 26)
+#define AT91_PIN_PE27   (0x80 + 27)
+#define AT91_PIN_PE28   (0x80 + 28)
+#define AT91_PIN_PE29   (0x80 + 29)
+#define AT91_PIN_PE30   (0x80 + 30)
+#define AT91_PIN_PE31   (0x80 + 31)
 
 #ifndef __ASSEMBLY__
 /* setup setup routines, called from board init or driver probe() */
@@ -215,8 +213,8 @@ extern void at91_gpio_resume(void);
 
 #include <asm/errno.h>
 
-#define gpio_to_irq(gpio) (gpio)
-#define irq_to_gpio(irq)  (irq)
+#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS)
+#define irq_to_gpio(irq)  (irq - NR_AIC_IRQS)
 
 #endif  /* __ASSEMBLY__ */
 
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 483478d8be6b..2d0e4e998566 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -16,6 +16,12 @@
 
 #include <asm/sizes.h>
 
+/* DBGU base */
+/* rm9200, 9260/9g20, 9261/9g10, 9rl */
+#define AT91_BASE_DBGU0 0xfffff200
+/* 9263, 9g45, cap9 */
+#define AT91_BASE_DBGU1 0xffffee00
+
 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
@@ -52,6 +58,12 @@
 #endif
 
 /*
+ * On all at91 have the Advanced Interrupt Controller starts at address
+ * 0xfffff000
+ */
+#define AT91_AIC        0xfffff000
+
+/*
  * Peripheral identifiers/interrupts.
  */
 #define AT91_ID_FIQ             0       /* Advanced Interrupt Controller (FIQ) */
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 4298e7806c76..4ca09ef7ca29 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -30,14 +30,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifndef CONFIG_ARCH_AT91X40
-#define __arch_ioremap  at91_ioremap
-#define __arch_iounmap  at91_iounmap
-#endif
-
-void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type);
-void at91_iounmap(volatile void __iomem *addr);
-
 static inline unsigned int at91_sys_read(unsigned int reg_offset)
 {
         void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index 36bd55f3fc6e..ac8b7dfc85ef 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -31,7 +31,7 @@
  * Acknowledge interrupt with AIC after interrupt has been handled.
  *   (by kernel/irq.c)
  */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
 
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 85820ad801cc..5e917a66edd7 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -23,70 +23,15 @@
 
 #include <mach/hardware.h>
 
-#if defined(CONFIG_ARCH_AT91RM9200)
+#ifdef CONFIG_ARCH_AT91X40
 
-#define CLOCK_TICK_RATE         (AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK   90000000
-#else
-#define AT91SAM9_MASTER_CLOCK   99300000
-#endif
-
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK   99300000
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G10)
-
-#define AT91SAM9_MASTER_CLOCK   133000000
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK   90000000
-#else
-#define AT91SAM9_MASTER_CLOCK   99959500
-#endif
-
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK   100000000
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#define AT91X40_MASTER_CLOCK    40000000
+#define CLOCK_TICK_RATE         (AT91X40_MASTER_CLOCK)
 
-#if defined(CONFIG_MACH_USB_A9G20)
-#define AT91SAM9_MASTER_CLOCK   133000000
 #else
-#define AT91SAM9_MASTER_CLOCK   132096000
-#endif
-
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
 
-#define AT91SAM9_MASTER_CLOCK   133333333
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK   100000000
-#define CLOCK_TICK_RATE         (AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK    40000000
-#define CLOCK_TICK_RATE         (AT91X40_MASTER_CLOCK)
+#define CLOCK_TICK_RATE         12345678
 
 #endif
 
-#endif
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 18bdcdeb474f..0234fd9d20d6 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -24,8 +24,10 @@
 #include <linux/io.h>
 #include <linux/atmel_serial.h>
 
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#if defined(CONFIG_AT91_EARLY_DBGU0)
+#define UART_OFFSET AT91_BASE_DBGU0
+#elif defined(CONFIG_AT91_EARLY_DBGU1)
+#define UART_OFFSET AT91_BASE_DBGU1
 #elif defined(CONFIG_AT91_EARLY_USART0)
 #define UART_OFFSET AT91_USART0
 #elif defined(CONFIG_AT91_EARLY_USART1)
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
deleted file mode 100644
index 8e4a1bd0ab1d..000000000000
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#include <mach/hardware.h>
-
-#define VMALLOC_END             (AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 9665265ec757..be6b639ecd7b 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -33,17 +33,18 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
+void __iomem *at91_aic_base;
 
 static void at91_aic_mask_irq(struct irq_data *d)
 {
         /* Disable interrupt on AIC */
-        at91_sys_write(AT91_AIC_IDCR, 1 << d->irq);
+        at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
 }
 
 static void at91_aic_unmask_irq(struct irq_data *d)
 {
         /* Enable interrupt on AIC */
-        at91_sys_write(AT91_AIC_IECR, 1 << d->irq);
+        at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
 }
 
 unsigned int at91_extern_irq;
@@ -77,8 +78,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
                 return -EINVAL;
         }
 
-        smr = at91_sys_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
-        at91_sys_write(AT91_AIC_SMR(d->irq), smr | srctype);
+        smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
+        at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
         return 0;
 }
 
@@ -102,15 +103,15 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 
 void at91_irq_suspend(void)
 {
-        backups = at91_sys_read(AT91_AIC_IMR);
-        at91_sys_write(AT91_AIC_IDCR, backups);
-        at91_sys_write(AT91_AIC_IECR, wakeups);
+        backups = at91_aic_read(AT91_AIC_IMR);
+        at91_aic_write(AT91_AIC_IDCR, backups);
+        at91_aic_write(AT91_AIC_IECR, wakeups);
 }
 
 void at91_irq_resume(void)
 {
-        at91_sys_write(AT91_AIC_IDCR, wakeups);
-        at91_sys_write(AT91_AIC_IECR, backups);
+        at91_aic_write(AT91_AIC_IDCR, wakeups);
+        at91_aic_write(AT91_AIC_IECR, backups);
 }
 
 #else
@@ -133,34 +134,39 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
 {
         unsigned int i;
 
+        at91_aic_base = ioremap(AT91_AIC, 512);
+
+        if (!at91_aic_base)
+                panic("Impossible to ioremap AT91_AIC\n");
+
         /*
          * The IVR is used by macro get_irqnr_and_base to read and verify.
          * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
          */
         for (i = 0; i < NR_AIC_IRQS; i++) {
                 /* Put irq number in Source Vector Register: */
-                at91_sys_write(AT91_AIC_SVR(i), i);
+                at91_aic_write(AT91_AIC_SVR(i), i);
                 /* Active Low interrupt, with the specified priority */
-                at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+                at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
 
                 irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
                 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 
                 /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
                 if (i < 8)
-                        at91_sys_write(AT91_AIC_EOICR, 0);
+                        at91_aic_write(AT91_AIC_EOICR, 0);
         }
 
         /*
          * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
          * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
          */
-        at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+        at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS);
 
         /* No debugging in AIC: Debug (Protect) Control Register */
-        at91_sys_write(AT91_AIC_DCR, 0);
+        at91_aic_write(AT91_AIC_DCR, 0);
 
         /* Disable and clear all interrupts initially */
-        at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
-        at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+        at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+        at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
 }
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 7046158109d7..62ad95556c36 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -34,7 +34,7 @@
 /*
  * Show the reason for the previous system reset.
  */
-#if defined(AT91_SHDWC)
+#if defined(AT91_RSTC)
 
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
@@ -58,8 +58,11 @@ static void __init show_reset_status(void)
         char *reason, *r2 = reset;
         u32 reset_type, wake_type;
 
+        if (!at91_shdwc_base)
+                return;
+
         reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-        wake_type = at91_sys_read(AT91_SHDW_SR);
+        wake_type = at91_shdwc_read(AT91_SHDW_SR);
 
         switch (reset_type) {
         case AT91_RSTC_RSTTYP_GENERAL:
@@ -215,7 +218,7 @@ static int at91_pm_enter(suspend_state_t state)
                                         | (1 << AT91_ID_FIQ)
                                         | (1 << AT91_ID_SYS)
                                         | (at91_extern_irq))
-                                & at91_sys_read(AT91_AIC_IMR),
+                                & at91_aic_read(AT91_AIC_IMR),
                         state);
 
         switch (state) {
@@ -283,7 +286,7 @@ static int at91_pm_enter(suspend_state_t state)
         }
 
         pr_debug("AT91: PM - wakeup %08x\n",
-                        at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+                        at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR));
 
 error:
         target_state = PM_SUSPEND_ON;
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 5eab6aa621d0..8294783b679d 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -10,38 +10,58 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <mach/at91sam9_smc.h>
 
 #include "sam9_smc.h"
 
-void __init sam9_smc_configure(int cs, struct sam9_smc_config* config)
+
+#define AT91_SMC_CS(id, n)      (smc_base_addr[id] + ((n) * 0x10))
+
+static void __iomem *smc_base_addr[2];
+
+static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
 {
+
         /* Setup register */
-        at91_sys_write(AT91_SMC_SETUP(cs),
-                  AT91_SMC_NWESETUP_(config->nwe_setup)
-                | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-                | AT91_SMC_NRDSETUP_(config->nrd_setup)
-                | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup)
-        );
+        __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
+                   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+                   | AT91_SMC_NRDSETUP_(config->nrd_setup)
+                   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
+                   base + AT91_SMC_SETUP);
 
         /* Pulse register */
-        at91_sys_write(AT91_SMC_PULSE(cs),
-                  AT91_SMC_NWEPULSE_(config->nwe_pulse)
-                | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-                | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-                | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse)
-        );
+        __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
+                   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+                   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+                   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
+                   base + AT91_SMC_PULSE);
 
         /* Cycle register */
-        at91_sys_write(AT91_SMC_CYCLE(cs),
-                  AT91_SMC_NWECYCLE_(config->write_cycle)
-                | AT91_SMC_NRDCYCLE_(config->read_cycle)
-        );
+        __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
+                   | AT91_SMC_NRDCYCLE_(config->read_cycle),
+                   base + AT91_SMC_CYCLE);
 
         /* Mode register */
-        at91_sys_write(AT91_SMC_MODE(cs),
-                  config->mode
-                | AT91_SMC_TDF_(config->tdf_cycles)
-        );
+        __raw_writel(config->mode
+                   | AT91_SMC_TDF_(config->tdf_cycles),
+                   base + AT91_SMC_MODE);
+}
+
+void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+{
+        sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
+}
+
+void __init at91sam9_ioremap_smc(int id, u32 addr)
+{
+        if (id > 1) {
+                pr_warn("%s: id > 2\n", __func__);
+                return;
+        }
+        smc_base_addr[id] = ioremap(addr, 512);
+        if (!smc_base_addr[id])
+                pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
 }
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index bf72cfb3455b..039c5ce17aec 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -30,4 +30,5 @@ struct sam9_smc_config {
         u8 tdf_cycles:4;
 };
 
-extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config);
+extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
+extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index aa64294c7db3..8bdcc3cb6012 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/pm.h>
 
 #include <asm/mach/map.h>
 
@@ -15,6 +16,7 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91_pmc.h>
+#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
@@ -73,27 +75,6 @@ static struct map_desc at91_io_desc __initdata = {
         .type           = MT_DEVICE,
 };
 
-void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-        if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1))
-                return (void __iomem *)AT91_IO_P2V(p);
-
-        return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(at91_ioremap);
-
-void at91_iounmap(volatile void __iomem *addr)
-{
-        unsigned long virt = (unsigned long)addr;
-
-        if (virt >= VMALLOC_START && virt < VMALLOC_END)
-                __iounmap(addr);
-}
-EXPORT_SYMBOL(at91_iounmap);
-
-#define AT91_DBGU0      0xfffff200
-#define AT91_DBGU1      0xffffee00
-
 static void __init soc_detect(u32 dbgu_base)
 {
         u32 cidr, socid;
@@ -266,9 +247,9 @@ void __init at91_map_io(void)
         at91_soc_initdata.type = AT91_SOC_NONE;
         at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 
-        soc_detect(AT91_DBGU0);
+        soc_detect(AT91_BASE_DBGU0);
         if (!at91_soc_is_detected())
-                soc_detect(AT91_DBGU1);
+                soc_detect(AT91_BASE_DBGU1);
 
         if (!at91_soc_is_detected())
                 panic("AT91: Impossible to detect the SOC type");
@@ -285,8 +266,25 @@ void __init at91_map_io(void)
                 at91_boot_soc.map_io();
 }
 
+void __iomem *at91_shdwc_base = NULL;
+
+static void at91sam9_poweroff(void)
+{
+        at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+void __init at91_ioremap_shdwc(u32 base_addr)
+{
+        at91_shdwc_base = ioremap(base_addr, 16);
+        if (!at91_shdwc_base)
+                panic("Impossible to ioremap at91_shdwc_base\n");
+        pm_power_off = at91sam9_poweroff;
+}
+
 void __init at91_initialize(unsigned long main_clock)
 {
+        at91_boot_soc.ioremap_registers();
+
         /* Init clock subsystem */
         at91_clock_init(main_clock);
 
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 21ed8816e6f7..4588ae6f7acd 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -7,6 +7,7 @@
 struct at91_init_soc {
         unsigned int *default_irq_priority;
         void (*map_io)(void);
+        void (*ioremap_registers)(void);
         void (*register_clocks)(void);
         void (*init)(void);
 };
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index f4d4d6d174d0..1a1a27dd5654 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -1615,7 +1615,7 @@ DMA_MemType_t dma_mem_type(void *addr)
 {
         unsigned long addrVal = (unsigned long)addr;
 
-        if (addrVal >= VMALLOC_END) {
+        if (addrVal >= CONSISTENT_BASE) {
                 /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
 
                 /* dma_alloc_xxx pages are physically and virtually contiguous */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
deleted file mode 100644
index 7397bd7817d9..000000000000
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
- * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
- * larger physical memory designs better.
- */
-#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
deleted file mode 100644
index 467b96137e47..000000000000
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 9b8c3d59731b..2c5fb4c7e509 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -201,6 +202,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
         .map_io         = cns3420_map_io,
         .init_irq       = cns3xxx_init_irq,
         .timer          = &cns3xxx_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = cns3420_init,
         .restart        = cns3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
index d87bfc397d39..01c57df5f716 100644
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware/entry-macro-gic.S>
-
                 .macro  disable_fiq
                 .endm
 
diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
deleted file mode 100644
index 1dd231d2f772..000000000000
--- a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright 2000 Russell King.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define VMALLOC_END             0xd8000000UL
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 495e31306fc0..2db78bd5c835 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,7 +4,7 @@
 #
 
 # Common objects
-obj-y                   := time.o clock.o serial.o io.o psc.o \
+obj-y                   := time.o clock.o serial.o psc.o \
                            dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)               += mux.o
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 2a00fe5ac253..a8ee6c9f0bb0 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -16,6 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/davinci_emac.h>
+#include <media/davinci/vpif_types.h>
 
 #define DM646X_EMAC_BASE                (0x01C80000)
 #define DM646X_EMAC_MDIO_BASE           (DM646X_EMAC_BASE + 0x4000)
@@ -34,58 +35,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv);
 
 void dm646x_video_init(void);
 
-enum vpif_if_type {
-        VPIF_IF_BT656,
-        VPIF_IF_BT1120,
-        VPIF_IF_RAW_BAYER
-};
-
-struct vpif_interface {
-        enum vpif_if_type if_type;
-        unsigned hd_pol:1;
-        unsigned vd_pol:1;
-        unsigned fid_pol:1;
-};
-
-struct vpif_subdev_info {
-        const char *name;
-        struct i2c_board_info board_info;
-        u32 input;
-        u32 output;
-        unsigned can_route:1;
-        struct vpif_interface vpif_if;
-};
-
-struct vpif_display_config {
-        int (*set_clock)(int, int);
-        struct vpif_subdev_info *subdevinfo;
-        int subdev_count;
-        const char **output;
-        int output_count;
-        const char *card_name;
-};
-
-struct vpif_input {
-        struct v4l2_input input;
-        const char *subdev_name;
-};
-
-#define VPIF_CAPTURE_MAX_CHANNELS       2
-
-struct vpif_capture_chan_config {
-        const struct vpif_input *inputs;
-        int input_count;
-};
-
-struct vpif_capture_config {
-        int (*setup_input_channel_mode)(int);
-        int (*setup_input_path)(int, const char *);
-        struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
-        struct vpif_subdev_info *subdev_info;
-        int subdev_count;
-        const char *card_name;
-};
-
 void dm646x_setup_vpif(struct vpif_display_config *,
                        struct vpif_capture_config *);
 
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index d1b954955c12..b2267d1e1a71 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -21,12 +21,4 @@
 #define __mem_pci(a)            (a)
 #define __mem_isa(a)            (a)
 
-#ifndef __ASSEMBLER__
-#define __arch_ioremap          davinci_ioremap
-#define __arch_iounmap          davinci_iounmap
-
-void __iomem *davinci_ioremap(unsigned long phys, size_t size,
-                              unsigned int type);
-void davinci_iounmap(volatile void __iomem *addr);
-#endif
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
deleted file mode 100644
index d49646a8e206..000000000000
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <mach/hardware.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END       (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
deleted file mode 100644
index 8ea60a8b2495..000000000000
--- a/arch/arm/mach-davinci/io.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * DaVinci I/O mapping code
- *
- * Copyright (C) 2005-2006 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-        struct map_desc *desc = davinci_soc_info.io_desc;
-        int desc_num = davinci_soc_info.io_desc_num;
-        int i;
-
-        for (i = 0; i < desc_num; i++, desc++) {
-                unsigned long iophys = __pfn_to_phys(desc->pfn);
-                unsigned long iosize = desc->length;
-
-                if (p >= iophys && (p + size) <= (iophys + iosize))
-                        return __io(desc->virtual + p - iophys);
-        }
-
-        return __arm_ioremap_caller(p, size, type,
-                                        __builtin_return_address(0));
-}
-EXPORT_SYMBOL(davinci_ioremap);
-
-void davinci_iounmap(volatile void __iomem *addr)
-{
-        unsigned long virt = (unsigned long)addr;
-
-        if (virt >= VMALLOC_START && virt < VMALLOC_END)
-                __iounmap(addr);
-}
-EXPORT_SYMBOL(davinci_iounmap);
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index b20ec9af7882..ad1165d488c1 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
-#include <mach/vmalloc.h>
-
 /*
  * Marvell Dove address maps.
  *
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
deleted file mode 100644
index a28792cf761e..000000000000
--- a/arch/arm/mach-dove/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfd800000UL
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
deleted file mode 100644
index ea141b7a3e03..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       0xdf000000UL
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 7b41651728cd..681e939407d4 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = adssphere_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index c5731c68acc0..d115653edca3 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,6 +39,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -250,6 +251,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -262,6 +264,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -274,6 +277,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -286,6 +290,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -298,6 +303,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -310,6 +316,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -322,6 +329,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
@@ -334,6 +342,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = edb93xx_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 7b89e8a1bb7b..af46970dc58e 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = gesbc9312_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
index 96b85e2c2c0b..9be6edcf9045 100644
--- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -9,51 +9,9 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-#include <mach/ep93xx-regs.h>
 
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =(EP93XX_AHB_VIRT_BASE)
-                orr     \base, \base, #0x000b0000
-                mov     \irqnr, #0
-                ldr     \irqstat, [\base]               @ lower 32 interrupts
-                cmp     \irqstat, #0
-                bne     1001f
-
-                eor     \base, \base, #0x00070000
-                ldr     \irqstat, [\base]               @ upper 32 interrupts
-                cmp     \irqstat, #0
-                beq     1002f
-                mov     \irqnr, #0x20
-
-1001:
-                movs    \tmp, \irqstat, lsl #16
-                movne   \irqstat, \tmp
-                addeq   \irqnr, \irqnr, #16
-
-                movs    \tmp, \irqstat, lsl #8
-                movne   \irqstat, \tmp
-                addeq   \irqnr, \irqnr, #8
-
-                movs    \tmp, \irqstat, lsl #4
-                movne   \irqstat, \tmp
-                addeq   \irqnr, \irqnr, #4
-
-                movs    \tmp, \irqstat, lsl #2
-                movne   \irqstat, \tmp
-                addeq   \irqnr, \irqnr, #2
-
-                movs    \tmp, \irqstat, lsl #1
-                addeq   \irqnr, \irqnr, #1
-                orrs    \base, \base, #1
-
-1002:
-                .endm
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
deleted file mode 100644
index 1b3f25d03d39..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfe800000UL
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 050ce9216d7c..7b98084f0c97 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,6 +18,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = micro9_init_machine,
         .restart        = ep93xx_restart,
@@ -92,6 +94,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = micro9_init_machine,
         .restart        = ep93xx_restart,
@@ -104,6 +107,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = micro9_init_machine,
         .restart        = ep93xx_restart,
@@ -116,6 +120,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = micro9_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 188cbdb4dbda..f4e553eca21c 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,6 +25,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = simone_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 797afdee80ab..fd846331ddff 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,6 +31,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -177,6 +178,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = snappercl15_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index de9bb541b550..79f8ecf07a19 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -23,6 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/ts72xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -247,6 +248,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
         .atag_offset    = 0x100,
         .map_io         = ts72xx_map_io,
         .init_irq       = ep93xx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &ep93xx_timer,
         .init_machine   = ts72xx_init_machine,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 6f567a4d8519..5de4214fa78f 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -19,6 +19,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/proc-fns.h>
+#include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -43,8 +44,6 @@
 
 #include "common.h"
 
-unsigned int gic_bank_offset __read_mostly;
-
 static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
@@ -391,27 +390,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
         }
 }
 
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-        struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-        gic_data->cpu_base = S5P_VA_GIC_CPU +
-                            (gic_bank_offset * smp_processor_id());
-
-        gic_data->dist_base = S5P_VA_GIC_DIST +
-                            (gic_bank_offset * smp_processor_id());
-}
-
 void __init exynos4_init_irq(void)
 {
         int irq;
+        unsigned int gic_bank_offset;
 
         gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-        gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-        gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-        gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-        gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+        gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
 
         for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8e37b4..3ba4f547534b 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                mov     \tmp, #0
-
-                mrc     p15, 0, \base, c0, c0, 5
-                and     \base, \base, #3
-                cmp     \base, #0
-                beq     1f
-
-                ldr     \tmp, =gic_bank_offset
-                ldr     \tmp, [\tmp]
-                cmp     \base, #1
-                beq     1f
-
-                cmp     \base, #2
-                addeq   \tmp, \tmp, \tmp
-                addne   \tmp, \tmp, \tmp, LSL #1
-
-1:              ldr     \base, =gic_cpu_base_addr
-                ldr     \base, [\base]
-                add     \base, \base, \tmp
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                /*
-                 * The interrupt numbering scheme is defined in the
-                 * interrupt controller spec.  To wit:
-                 *
-                 * Interrupts 0-15 are IPI
-                 * 16-28 are reserved
-                 * 29-31 are local.  We allow 30 to be used for the watchdog.
-                 * 32-1020 are global
-                 * 1021-1022 are reserved
-                 * 1023 is "spurious" (no interrupt)
-                 *
-                 * For now, we ignore all local interrupts so only return an interrupt if it's
-                 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-                 *
-                 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-                 * valid range for an IRQ (30-1020 inclusive).
-                 */
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-                ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-                ldr     \tmp, =1021
-
-                bic     \irqnr, \irqstat, #0x1c00
-
-                cmp     \irqnr, #15
-                cmpcc   \irqnr, \irqnr
-                cmpne   \irqnr, \tmp
-                cmpcs   \irqnr, \irqnr
-                addne   \irqnr, \irqnr, #32
-
-                .endm
-
-                /* We assume that irqstat (the raw value of the IRQ acknowledge
-                 * register) is preserved from the macro above.
-                 * If there is an IPI, we immediately signal end of interrupt on the
-                 * controller, since this requires the original irqstat value which
-                 * we won't easily be able to recreate later.
-                 */
-
-                .macro test_for_ipi, irqnr, irqstat, base, tmp
-                bic     \irqnr, \irqstat, #0x1c00
-                cmp     \irqnr, #16
-                strcc   \irqstat, [\base, #GIC_CPU_EOI]
-                cmpcs   \irqnr, \irqnr
-                .endm
diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
deleted file mode 100644
index 284330e571d2..000000000000
--- a/arch/arm/mach-exynos/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END     0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index 9a2b99646d26..d726fcd3acf9 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,6 +16,7 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -211,6 +212,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = armlex4210_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = armlex4210_machine_init,
         .timer          = &exynos4_timer,
         .restart        = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 5f6b97f04b70..635fb97e31ab 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -32,6 +32,7 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
@@ -1334,6 +1335,7 @@ MACHINE_START(NURI, "NURI")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = nuri_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = nuri_machine_init,
         .timer          = &exynos4_timer,
         .reserve        = &nuri_reserve,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 9536b3356919..586eb995aa96 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -22,6 +22,7 @@
 #include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -695,6 +696,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = origen_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = origen_machine_init,
         .timer          = &exynos4_timer,
         .reserve        = &origen_reserve,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 375b5aa5e163..d00e4f016a68 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/backlight.h>
@@ -288,6 +289,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = smdk4x12_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = smdk4x12_machine_init,
         .timer          = &exynos4_timer,
         .restart        = exynos4_restart,
@@ -299,6 +301,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = smdk4x12_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = smdk4x12_machine_init,
         .timer          = &exynos4_timer,
         .restart        = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index f2552ff5ddb0..5b365613b470 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -21,6 +21,7 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -376,6 +377,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = smdkv310_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = smdkv310_machine_init,
         .timer          = &exynos4_timer,
         .reserve        = &smdkv310_reserve,
@@ -387,6 +389,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = smdkv310_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = smdkv310_machine_init,
         .timer          = &exynos4_timer,
         .restart        = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 0078d062616e..52aea972746a 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
@@ -1059,6 +1060,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
         .atag_offset    = 0x100,
         .init_irq       = exynos4_init_irq,
         .map_io         = universal_map_io,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = universal_machine_init,
         .timer          = &exynos4_timer,
         .reserve        = &universal_reserve,
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 69ffb2fb3875..60bc45e3e709 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,7 +32,6 @@
 
 #include <plat/cpu.h>
 
-extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG           (samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
-        void __iomem *dist_base = S5P_VA_GIC_DIST +
-                                (gic_bank_offset * smp_processor_id());
-        void __iomem *cpu_base = S5P_VA_GIC_CPU +
-                                (gic_bank_offset * smp_processor_id());
-        int i;
-
-        /*
-         * Deal with the banked PPI and SGI interrupts - disable all
-         * PPI interrupts, ensure all SGI interrupts are enabled.
-         */
-        __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-        __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-        /*
-         * Set priority on PPI and SGI interrupts
-         */
-        for (i = 0; i < 32; i += 4)
-                __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-        __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
-        __raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
         /*
@@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
          * core (e.g. timer irq), then they will not have been enabled
          * for us: do so
          */
-        exynos4_gic_secondary_init();
+        gic_secondary_init(0);
 
         /*
          * let the primary processor know we're out of the
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
deleted file mode 100644
index 40ba78e5782b..000000000000
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
deleted file mode 100644
index 45371eb86fcb..000000000000
--- a/arch/arm/mach-gemini/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#define VMALLOC_END     0xf0000000UL
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
deleted file mode 100644
index 8520b4a4d4e6..000000000000
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END       0xd0000000UL
-
-#endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 4508384f100f..804c4a55f803 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -144,6 +144,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
         .map_io         = highbank_map_io,
         .init_irq       = highbank_init_irq,
         .timer          = &highbank_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = highbank_init,
         .dt_compat      = highbank_match,
         .restart        = highbank_restart,
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
index 73c11297509e..a14f9e62ca92 100644
--- a/arch/arm/mach-highbank/include/mach/entry-macro.S
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
         .macro  disable_fiq
         .endm
 
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
deleted file mode 100644
index 1969e954277a..000000000000
--- a/arch/arm/mach-highbank/include/mach/vmalloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#define VMALLOC_END             0xFEE00000UL
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
deleted file mode 100644
index 2f5a2bafb11f..000000000000
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-iop13xx/include/mach/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
deleted file mode 100644
index c53456740345..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _VMALLOC_H_
-#define _VMALLOC_H_
-#define VMALLOC_END     0xfa000000UL
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
index 059c783ce0b2..2d88264b9863 100644
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -13,15 +13,8 @@
 
 #include <asm/hardware/iop3xx.h>
 
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-        unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
 #define IO_SPACE_LIMIT          0xffffffff
 #define __io(p)         ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)            (a)
 
-#define __arch_ioremap  __iop3xx_ioremap
-#define __arch_iounmap  __iop3xx_iounmap
-
 #endif
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
deleted file mode 100644
index c4862d48e583..000000000000
--- a/arch/arm/mach-iop32x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfe000000UL
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
index 39e893e97c21..a8a66fc8fbdb 100644
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -13,15 +13,8 @@
 
 #include <asm/hardware/iop3xx.h>
 
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-        unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
 #define IO_SPACE_LIMIT          0xffffffff
 #define __io(p)         ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)            (a)
 
-#define __arch_ioremap  __iop3xx_ioremap
-#define __arch_iounmap  __iop3xx_iounmap
-
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
deleted file mode 100644
index 48331dc23704..000000000000
--- a/arch/arm/mach-iop33x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfe000000UL
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
deleted file mode 100644
index 61c8dae24f95..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END         0xfb000000UL
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
index a1749d0fd896..4ce4353b9f72 100644
--- a/arch/arm/mach-ixp23xx/include/mach/io.h
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -20,33 +20,4 @@
 #define __io(p)         ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
 #define __mem_pci(a)    (a)
 
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
-        if (addr >= IXP23XX_PCI_MEM_START &&
-                addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
-                if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
-                        return NULL;
-
-                return (void __iomem *)
-                        ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
-        }
-
-        return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
-        if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
-            (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
-                return;
-
-        __iounmap(addr);
-}
-
-#define __arch_ioremap  ixp23xx_ioremap
-#define __arch_iounmap  ixp23xx_iounmap
-
-
 #endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
deleted file mode 100644
index 896c56a1c00e..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END     (0xec000000UL)
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
deleted file mode 100644
index 9bcd64d59854..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (0xff000000UL)
-
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index 1aaddc364f2e..49dd0cb5e166 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,31 +19,6 @@ static inline void __iomem *__io(unsigned long addr)
                                         + KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-        void __iomem *retval;
-        unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
-        if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
-            size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
-                retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
-        } else {
-                retval = __arm_ioremap(paddr, size, mtype);
-        }
-
-        return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-        if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
-            addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
-                __iounmap(addr);
-}
-
-#define __arch_ioremap          __arch_ioremap
-#define __arch_iounmap          __arch_iounmap
 #define __io(a)                 __io(a)
 #define __mem_pci(a)            (a)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
deleted file mode 100644
index bf162ca3d2c1..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfe800000UL
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
deleted file mode 100644
index 744ac66be3a2..000000000000
--- a/arch/arm/mach-ks8695/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END       (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
deleted file mode 100644
index 720fa43a60bf..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     0xF0000000UL
-
-#endif
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
deleted file mode 100644
index 1d0bac003ad0..000000000000
--- a/arch/arm/mach-mmp/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfe000000UL
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f5d5f0..000ddf0a4f33 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -13,7 +13,6 @@ config ARCH_MSM7X00A
         select CPU_V6
         select GPIO_MSM_V1
         select MSM_PROC_COMM
-        select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_MSM7X30
         bool "MSM7x30"
@@ -25,7 +24,6 @@ config ARCH_MSM7X30
         select MSM_GPIOMUX
         select GPIO_MSM_V1
         select MSM_PROC_COMM
-        select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_QSD8X50
         bool "QSD8X50"
@@ -37,7 +35,6 @@ config ARCH_QSD8X50
         select MSM_GPIOMUX
         select GPIO_MSM_V1
         select MSM_PROC_COMM
-        select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_MSM8X60
         bool "MSM8X60"
@@ -63,6 +60,9 @@ config ARCH_MSM8960
 
 endchoice
 
+config MSM_HAS_DEBUG_UART_HS
+        bool
+
 config MSM_SOC_REV_A
         bool
 config  ARCH_MSM_SCORPIONMP
@@ -73,9 +73,6 @@ config  ARCH_MSM_ARM11
 config  ARCH_MSM_SCORPION
         bool
 
-config HAS_MSM_DEBUG_UART_PHYS
-        bool
-
 config  MSM_VIC
         bool
 
@@ -152,32 +149,6 @@ config MACH_MSM8960_RUMI3
 
 endmenu
 
-config MSM_DEBUG_UART
-        int
-        default 1 if MSM_DEBUG_UART1
-        default 2 if MSM_DEBUG_UART2
-        default 3 if MSM_DEBUG_UART3
-
-if HAS_MSM_DEBUG_UART_PHYS
-choice
-        prompt "Debug UART"
-
-        default MSM_DEBUG_UART_NONE
-
-        config MSM_DEBUG_UART_NONE
-                bool "None"
-
-        config MSM_DEBUG_UART1
-                bool "UART1"
-
-        config MSM_DEBUG_UART2
-                bool "UART2"
-
-        config MSM_DEBUG_UART3
-                bool "UART3"
-endchoice
-endif
-
 config MSM_SMD_PKG3
         bool
 
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 6dc1cbd2a595..ed3598128530 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -99,6 +99,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
         .map_io = msm8960_map_io,
         .init_irq = msm8960_init_irq,
         .timer = &msm_timer,
+        .handle_irq = gic_handle_irq,
         .init_machine = msm8960_sim_init,
 MACHINE_END
 
@@ -108,6 +109,7 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
         .map_io = msm8960_map_io,
         .init_irq = msm8960_init_irq,
         .timer = &msm_timer,
+        .handle_irq = gic_handle_irq,
         .init_machine = msm8960_rumi3_init,
 MACHINE_END
 
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 44bf71688373..0a113424632c 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -108,6 +108,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
         .reserve = msm8x60_reserve,
         .map_io = msm8x60_map_io,
         .init_irq = msm8x60_init_irq,
+        .handle_irq = gic_handle_irq,
         .init_machine = msm8x60_init,
         .timer = &msm_timer,
 MACHINE_END
@@ -117,6 +118,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
         .reserve = msm8x60_reserve,
         .map_io = msm8x60_map_io,
         .init_irq = msm8x60_init_irq,
+        .handle_irq = gic_handle_irq,
         .init_machine = msm8x60_init,
         .timer = &msm_timer,
 MACHINE_END
@@ -126,6 +128,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
         .reserve = msm8x60_reserve,
         .map_io = msm8x60_map_io,
         .init_irq = msm8x60_init_irq,
+        .handle_irq = gic_handle_irq,
         .init_machine = msm8x60_init,
         .timer = &msm_timer,
 MACHINE_END
@@ -135,6 +138,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
         .reserve = msm8x60_reserve,
         .map_io = msm8x60_map_io,
         .init_irq = msm8x60_init_irq,
+        .handle_irq = gic_handle_irq,
         .init_machine = msm8x60_init,
         .timer = &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 2dc73ccddb11..3ffd8668c9a5 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -1,6 +1,7 @@
-/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+/*
  *
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -14,40 +15,52 @@
  *
  */
 
-
-
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
-#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
         .macro  addruart, rp, rv, tmp
+#ifdef MSM_DEBUG_UART_PHYS
         ldr     \rp, =MSM_DEBUG_UART_PHYS
         ldr     \rv, =MSM_DEBUG_UART_BASE
+#endif
         .endm
 
-        .macro  senduart,rd,rx
+        .macro  senduart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+        @ Write the 1 character to UARTDM_TF
+        str     \rd, [\rx, #0x70]
+#else
         teq     \rx, #0
         strne   \rd, [\rx, #0x0C]
+#endif
         .endm
 
-        .macro  waituart,rd,rx
+        .macro  waituart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+        @ check for TX_EMT in UARTDM_SR
+        ldr     \rd, [\rx, #0x08]
+        tst     \rd, #0x08
+        bne     1002f
+        @ wait for TXREADY in UARTDM_ISR
+1001:   ldr     \rd, [\rx, #0x14]
+        tst     \rd, #0x80
+        beq     1001b
+1002:
+        @ Clear TX_READY by writing to the UARTDM_CR register
+        mov     \rd, #0x300
+        str     \rd, [\rx, #0x10]
+        @ Write 0x1 to NCF register
+        mov     \rd, #0x1
+        str     \rd, [\rx, #0x40]
+        @ UARTDM reg. Read to induce delay
+        ldr     \rd, [\rx, #0x08]
+#else
         @ wait for TX_READY
 1001:   ldr     \rd, [\rx, #0x08]
         tst     \rd, #0x04
         beq     1001b
-        .endm
-#else
-        .macro  addruart, rp, rv, tmp
-        mov     \rv, #0xff000000
-        orr     \rv, \rv, #0x00f00000
-        .endm
-
-        .macro  senduart,rd,rx
-        .endm
-
-        .macro  waituart,rd,rx
-        .endm
 #endif
+        .endm
 
-        .macro  busyuart,rd,rx
+        .macro  busyuart, rd, rx
         .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
deleted file mode 100644
index 717076f3ca73..000000000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Low-level IRQ helper macros
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/entry-macro-gic.S>
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
deleted file mode 100644
index 70563ed11b36..000000000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-vic.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <mach/msm_iomap.h>
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  get_irqnr_preamble, base, tmp
-        @ enable imprecise aborts
-        cpsie   a
-        mov     \base, #MSM_VIC_BASE
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        @ 0xD0 has irq# or old irq# if the irq has been handled
-        @ 0xD4 has irq# or -1 if none pending *but* if you just
-        @ read 0xD4 you never get the first irq for some reason
-        ldr     \irqnr, [\base, #0xD0]
-        ldr     \irqnr, [\base, #0xD4]
-        cmp     \irqnr, #0xffffffff
-        .endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index b16f082eeb6f..41f7003ef34f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -16,8 +16,27 @@
  *
  */
 
-#if defined(CONFIG_ARM_GIC)
-#include <mach/entry-macro-qgic.S>
-#else
-#include <mach/entry-macro-vic.S>
+        .macro  disable_fiq
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+
+#if !defined(CONFIG_ARM_GIC)
+#include <mach/msm_iomap.h>
+
+        .macro  get_irqnr_preamble, base, tmp
+        @ enable imprecise aborts
+        cpsie   a
+        mov     \base, #MSM_VIC_BASE
+        .endm
+
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+        @ 0xD0 has irq# or old irq# if the irq has been handled
+        @ 0xD4 has irq# or -1 if none pending *but* if you just
+        @ read 0xD4 you never get the first irq for some reason
+        ldr     \irqnr, [\base, #0xD0]
+        ldr     \irqnr, [\base, #0xD4]
+        cmp     \irqnr, #0xffffffff
+        .endm
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
index 94fe9fe6feb3..8af46123dab6 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -78,18 +78,6 @@
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
-#endif
-
 #define MSM_SDC1_PHYS         0xA0400000
 #define MSM_SDC1_SIZE         SZ_4K
 
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index 37694442d1bd..198202c267c8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -89,18 +89,6 @@
 #define MSM_UART3_PHYS        0xACC00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
-#endif
-
 #define MSM_MDC_BASE          IOMEM(0xE0200000)
 #define MSM_MDC_PHYS          0xAA500000
 #define MSM_MDC_SIZE          SZ_1M
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
index 3c9d9602a318..800b55767e6b 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
@@ -45,4 +45,9 @@
 #define MSM8960_TMR0_PHYS       0x0208A000
 #define MSM8960_TMR0_SIZE       SZ_4K
 
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE     0xE1040000
+#define MSM_DEBUG_UART_PHYS     0x16440000
+#endif
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index d67cd73316f4..0faa894729b7 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -83,18 +83,6 @@
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
-#endif
-
 #define MSM_MDC_BASE          IOMEM(0xE0200000)
 #define MSM_MDC_PHYS          0xAA500000
 #define MSM_MDC_SIZE          SZ_1M
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 3b19b8f244b8..54e12caa8d86 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -62,4 +62,9 @@
 #define MSM8X60_TMR0_PHYS       0x02040000
 #define MSM8X60_TMR0_SIZE       SZ_4K
 
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE     0xE1040000
+#define MSM_DEBUG_UART_PHYS     0x19C40000
+#endif
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 4ded15238b60..90682f4599d3 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -55,6 +55,18 @@
 
 #include "msm_iomap-8960.h"
 
+#define MSM_DEBUG_UART_SIZE     SZ_4K
+#if defined(CONFIG_DEBUG_MSM_UART1)
+#define MSM_DEBUG_UART_BASE     0xE1000000
+#define MSM_DEBUG_UART_PHYS     MSM_UART1_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART2)
+#define MSM_DEBUG_UART_BASE     0xE1000000
+#define MSM_DEBUG_UART_PHYS     MSM_UART2_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART3)
+#define MSM_DEBUG_UART_BASE     0xE1000000
+#define MSM_DEBUG_UART_PHYS     MSM_UART3_PHYS
+#endif
+
 /* Virtual addresses shared across all MSM targets. */
 #define MSM_CSR_BASE            IOMEM(0xE0001000)
 #define MSM_QGIC_DIST_BASE      IOMEM(0xF0000000)
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index d94292c29d8e..169a84007456 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/uncompress.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,17 +14,40 @@
  */
 
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+#define __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include <asm/processor.h>
+#include <mach/msm_iomap.h>
+
+#define UART_CSR      (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
+#define UART_TF       (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
 
-#include "hardware.h"
-#include "linux/io.h"
-#include "mach/msm_iomap.h"
+#define UART_DM_SR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
+#define UART_DM_CR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
+#define UART_DM_ISR   (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
+#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
+#define UART_DM_TF    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
 
 static void putc(int c)
 {
 #if defined(MSM_DEBUG_UART_PHYS)
-        unsigned base = MSM_DEBUG_UART_PHYS;
-        while (!(readl(base + 0x08) & 0x04)) ;
-        writel(c, base + 0x0c);
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+        /*
+         * Wait for TX_READY to be set; but skip it if we have a
+         * TX underrun.
+         */
+        if (UART_DM_SR & 0x08)
+                while (!(UART_DM_ISR & 0x80))
+                        cpu_relax();
+
+        UART_DM_CR = 0x300;
+        UART_DM_NCHAR = 0x1;
+        UART_DM_TF = c;
+#else
+        while (!(UART_CSR & 0x04))
+                cpu_relax();
+        UART_TF = c;
+#endif
 #endif
 }
 
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
deleted file mode 100644
index d138448eff16..000000000000
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-msm/include/mach/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END       0xd0000000UL
-
-#endif
-
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 8759ecf7454f..578b04e42deb 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -47,7 +47,8 @@ static struct map_desc msm_io_desc[] __initdata = {
         MSM_CHIP_DEVICE(GPIO1, MSM7X00),
         MSM_CHIP_DEVICE(GPIO2, MSM7X00),
         MSM_DEVICE(CLK_CTL),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+        defined(CONFIG_DEBUG_MSM_UART3)
         MSM_DEVICE(DEBUG_UART),
 #endif
 #ifdef CONFIG_ARCH_MSM7X30
@@ -84,7 +85,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
         MSM_DEVICE(SCPLL),
         MSM_DEVICE(AD5),
         MSM_DEVICE(MDC),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+        defined(CONFIG_DEBUG_MSM_UART3)
         MSM_DEVICE(DEBUG_UART),
 #endif
         {
@@ -109,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
         MSM_CHIP_DEVICE(TMR0, MSM8X60),
         MSM_DEVICE(ACC),
         MSM_DEVICE(GCC),
+#ifdef CONFIG_DEBUG_MSM8660_UART
+        MSM_DEVICE(DEBUG_UART),
+#endif
 };
 
 void __init msm_map_msm8x60_io(void)
@@ -123,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
         MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
         MSM_CHIP_DEVICE(TMR, MSM8960),
         MSM_CHIP_DEVICE(TMR0, MSM8960),
+#ifdef CONFIG_DEBUG_MSM8960_UART
+        MSM_DEVICE(DEBUG_UART),
+#endif
 };
 
 void __init msm_map_msm8960_io(void)
@@ -146,7 +154,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
         MSM_DEVICE(SAW),
         MSM_DEVICE(GCC),
         MSM_DEVICE(TCSR),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+        defined(CONFIG_DEBUG_MSM_UART3)
         MSM_DEVICE(DEBUG_UART),
 #endif
         {
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index fdec58aaa35c..0b3e357c4c8c 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -79,7 +79,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
         ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
                                 SCM_FLAG_COLDBOOT_CPU1);
         if (ret == 0) {
-                void *sc1_base_ptr;
+                void __iomem *sc1_base_ptr;
                 sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
                 if (sc1_base_ptr) {
                         writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
deleted file mode 100644
index ba26fe98e640..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END     0xfe000000UL
diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h
deleted file mode 100644
index 103b0165ed0b..000000000000
--- a/arch/arm/mach-mxs/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2000 Russell King.
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_VMALLOC_H__
-#define __MACH_MXS_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END       0xf4000000UL
-
-#endif /* __MACH_MXS_VMALLOC_H__ */
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index 844f1f9acbdf..6e9f1cbe1634 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -18,22 +18,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <mach/hardware.h>
 
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =io_p2v(0x001ff000)
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \irqstat, [\base, #0]
-                clz     \irqnr, \irqstat
-                rsb     \irqnr, \irqnr, #31
-                cmp     \irqstat, #0
-                .endm
-
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
deleted file mode 100644
index 871f1ef7bff5..000000000000
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 5384b5a78f68..180ea899a48a 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -203,6 +204,7 @@ MACHINE_START(NXDB500, "Hilscher nxdb500")
         .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &netx_timer,
         .init_machine   = nxdb500_init,
         .restart        = netx_restart,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 2df3783ef459..58009e29b20e 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -96,6 +97,7 @@ MACHINE_START(NXDKN, "Hilscher nxdkn")
         .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &netx_timer,
         .init_machine   = nxdkn_init,
         .restart        = netx_restart,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 26255b2ce473..122e99826ef6 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -180,6 +181,7 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
         .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &netx_timer,
         .init_machine   = nxeb500hmi_init,
         .restart        = netx_restart,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 68c7b79bad79..7c878bf00340 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -282,6 +283,7 @@ MACHINE_START(NOMADIK, "NHK8815")
         .atag_offset    = 0x100,
         .map_io         = cpu8815_map_io,
         .init_irq       = cpu8815_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &nomadik_timer,
         .init_machine   = nhk8815_platform_init,
         .restart        = cpu8815_restart,
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
index 49f1aa3bb420..98ea1c1fbbab 100644
--- a/arch/arm/mach-nomadik/include/mach/entry-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -6,38 +6,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =IO_ADDRESS(NOMADIK_IC_BASE)
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-        /* This stanza gets the irq mask from one of two status registers */
-        mov     \irqnr, #0
-        ldr     \irqstat, [\base, #VIC_REG_IRQSR0]      @ get masked status
-        cmp     \irqstat, #0
-        bne     1001f
-        add     \irqnr, \irqnr, #32
-        ldr     \irqstat, [\base, #VIC_REG_IRQSR1]      @ get masked status
-
-1001:   tst     \irqstat, #15
-        bne     1002f
-        add     \irqnr, \irqnr, #4
-        movs    \irqstat, \irqstat, lsr #4
-        bne     1001b
-1002:   tst     \irqstat, #1
-        bne     1003f
-        add     \irqnr, \irqnr, #1
-        movs    \irqstat, \irqstat, lsr #1
-        bne     1002b
-1003:   /* EQ will be set if no irqs pending */
-        .endm
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
deleted file mode 100644
index f83d574d9445..000000000000
--- a/arch/arm/mach-nomadik/include/mach/vmalloc.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-#define VMALLOC_END       0xe8000000UL
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
deleted file mode 100644
index 22ec4a479577..000000000000
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-omap1/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END     0xd8000000UL
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 7969cfda4454..8e55b6fb3478 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,7 +121,6 @@ void __init omap16xx_map_io(void)
 void omap1_init_early(void)
 {
         omap_check_revision();
-        omap_ioremap_init();
 
         /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
          * on a Posted Write in the TIPB Bridge".
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e1293aa513d3..b6625130831d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2
         depends on ARCH_OMAP2PLUS
         default y
         select CPU_V6
+        select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP3
         bool "TI OMAP3"
@@ -36,6 +37,7 @@ config ARCH_OMAP3
         select ARCH_HAS_OPP
         select PM_OPP if PM
         select ARM_CPU_SUSPEND if PM
+        select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP4
         bool "TI OMAP4"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2e730242132f..7370983f809f 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -301,6 +301,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
         .map_io         = omap243x_map_io,
         .init_early     = omap2430_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_2430sdp_init,
         .timer          = &omap2_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7111677c7e6b..9996334cb687 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -728,6 +728,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
         .map_io         = omap3_map_io,
         .init_early     = omap3430_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_3430sdp_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index a01d08118a40..6ef350d1ae4f 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,6 +215,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
         .map_io         = omap3_map_io,
         .init_early     = omap3630_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_sdp_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8a46ad8f1227..bad5d5a5ef79 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -27,6 +27,7 @@
 #include <linux/leds_pwm.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -983,6 +984,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
         .map_io         = omap4_map_io,
         .init_early     = omap4430_init_early,
         .init_irq       = gic_init_irq,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = omap_4430sdp_init,
         .timer          = &omap4_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index c1d6b6338b00..c3851e8de28b 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -98,6 +98,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
         .map_io         = omap3_map_io,
         .init_early     = am35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = am3517_crane_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 18c079070ec3..f5a3a3f11739 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -491,6 +491,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
         .map_io         = omap3_map_io,
         .init_early     = am35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = am3517_evm_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 75c731c45b2d..ac773829941f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -354,6 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
         .map_io         = omap242x_map_io,
         .init_early     = omap2420_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_apollon_init,
         .timer          = &omap2_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c3402cdf0bac..1545102d1f9b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -634,6 +634,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = cm_t35_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
@@ -645,6 +646,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
         .map_io         = omap3_map_io,
         .init_early     = omap3630_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = cm_t3730_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 0b06ac3d440b..f36d694d2159 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -299,6 +299,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
         .map_io         = omap3_map_io,
         .init_early     = am35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = cm_t3517_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 519e5f9d491c..e873063f4fda 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -660,6 +660,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = devkit8000_init,
         .timer          = &omap3_secure_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index f462d8c65bc4..f8c5b2cc7c9c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -122,6 +122,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
         .map_io         = omap243x_map_io,
         .init_early     = omap2430_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_generic_init,
         .timer          = &omap2_timer,
         .dt_compat      = omap243x_boards_compat,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 34ccde484fa6..54af800d143c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -396,6 +396,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
         .map_io         = omap242x_map_io,
         .init_early     = omap2420_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_h4_init,
         .timer          = &omap2_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e1850d555616..a59ace0ed560 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -672,6 +672,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = igep_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
@@ -683,6 +684,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = igep_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 84bbdd6e5aff..2d2a61f7dcbf 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -434,6 +434,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
         .map_io         = omap3_map_io,
         .init_early     = omap3430_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_ldp_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index cc1dd541224a..cef2cf1c0b8d 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -689,6 +689,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
         .map_io         = omap242x_map_io,
         .init_early     = omap2420_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = n8x0_init_machine,
         .timer          = &omap2_timer,
         .restart        = omap_prcm_restart,
@@ -700,6 +701,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
         .map_io         = omap242x_map_io,
         .init_early     = omap2420_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = n8x0_init_machine,
         .timer          = &omap2_timer,
         .restart        = omap_prcm_restart,
@@ -711,6 +713,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
         .map_io         = omap242x_map_io,
         .init_early     = omap2420_init_early,
         .init_irq       = omap2_init_irq,
+        .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = n8x0_init_machine,
         .timer          = &omap2_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index bb6031f6dcb6..7ffcd2839e7b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -559,6 +559,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
         .map_io         = omap3_map_io,
         .init_early     = omap3_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3_beagle_init,
         .timer          = &omap3_secure_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 60912e473253..003fe34c9343 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -681,6 +681,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3_evm_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7ecf04a3ff1d..4198dd017d8f 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -208,6 +208,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3logic_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
@@ -218,6 +219,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3logic_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7071a2473a6b..1644b73017fc 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -606,6 +606,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3pandora_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 6e47987d989b..cb089a46f62f 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -454,6 +454,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
         .map_io                 = omap3_map_io,
         .init_early             = omap35xx_init_early,
         .init_irq               = omap3_init_irq,
+        .handle_irq             = omap3_intc_handle_irq,
         .init_machine           = omap3_stalker_init,
         .timer                  = &omap3_secure_timer,
         .restart                = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 5bb590a40f2b..a0b851aafcca 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -381,6 +381,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
         .map_io         = omap3_map_io,
         .init_early     = omap3430_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3_touchbook_init,
         .timer          = &omap3_secure_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 955cbee91b46..8b06c6a60d02 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
 #include <linux/wl12xx.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -576,6 +577,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
         .map_io         = omap4_map_io,
         .init_early     = omap4430_init_early,
         .init_irq       = gic_init_irq,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = omap4_panda_init,
         .timer          = &omap4_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c14d78129999..52c0cef77165 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -562,6 +562,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = overo_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0c67ecc244d6..8678b386c6a2 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -149,6 +149,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
         .map_io         = omap3_map_io,
         .init_early     = omap3630_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = rm680_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index c3e716ad2b51..27f01f051dff 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -127,6 +127,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
         .map_io         = omap3_map_io,
         .init_early     = omap3430_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = rx51_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 68d6f1c875b8..5c20bcc57f2b 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -135,6 +135,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
         .map_io         = omap3_map_io,
         .init_early     = omap3430_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_zoom_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
@@ -146,6 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
         .map_io         = omap3_map_io,
         .init_early     = omap3630_init_early,
         .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_zoom_init,
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 1df1b396fc3b..cda888a2e635 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -154,6 +154,8 @@ void omap_intc_restore_context(void);
 void omap3_intc_suspend(void);
 void omap3_intc_prepare_idle(void);
 void omap3_intc_resume_idle(void);
+void omap2_intc_handle_irq(struct pt_regs *regs);
+void omap3_intc_handle_irq(struct pt_regs *regs);
 
 /*
  * wfi used in low power code. Directly opcode is used instead
@@ -170,8 +172,6 @@ void omap3_intc_resume_idle(void);
 extern void __iomem *l2cache_base;
 #endif
 
-extern void __iomem *gic_dist_base_addr;
-
 extern void __init gic_init_irq(void);
 extern void omap_smc1(u32 fn, u32 arg);
 
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 942bb4f19f9f..e20332f4abdc 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -34,6 +34,7 @@
 
 #include "pm.h"
 #include "control.h"
+#include "common.h"
 
 #ifdef CONFIG_CPU_IDLE
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index dce9905d64bb..bc6cf863a563 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/delay.h>
 
 #include <video/omapdss.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include "control.h"
 #include "display.h"
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a10945a..56964a0c4c7e 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET   0x0040  /* omap2/3 active interrupt offset */
-#define ACTIVEIRQ_MASK          0x7f    /* omap2/3 active interrupt bits */
 
                 .macro  disable_fiq
                 .endm
 
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
-                /*
-                 * Configure the interrupt base on the first interrupt.
-                 * See also omap_irq_base_init for setting omap_irq_base.
-                 */
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =omap_irq_base   @ irq base address
-                ldr     \base, [\base, #0]      @ irq base value
-                .endm
-
-                /* Check the pending interrupts. Note that base already set */
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                tst     \base, #0x100           @ gic address?
-                bne     4401f                   @ found gic
-
-                /* Handle omap2 and omap3 */
-                ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-                cmp     \irqnr, #0x0
-                bne     9998f
-                ldr     \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-                cmp     \irqnr, #0x0
-                bne     9998f
-                ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-                cmp     \irqnr, #0x0
-                bne     9998f
-
-                /*
-                 * ti816x has additional IRQ pending register. Checking this
-                 * register on omap2 & omap3 has no effect (read as 0).
-                 */
-                ldr     \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-                cmp     \irqnr, #0x0
-9998:
-                ldrne   \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-                and     \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-                b       9999f
-
-                /* Handle omap4 */
-4401:           ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-                ldr     \tmp, =1021
-                bic     \irqnr, \irqstat, #0x1c00
-                cmp     \irqnr, #15
-                cmpcc   \irqnr, \irqnr
-                cmpne   \irqnr, \tmp
-                cmpcs   \irqnr, \irqnr
-9999:
-                .endm
-
-#ifdef CONFIG_SMP
-                /* We assume that irqstat (the raw value of the IRQ acknowledge
-                 * register) is preserved from the macro above.
-                 * If there is an IPI, we immediately signal end of interrupt
-                 * on the controller, since this requires the original irqstat
-                 * value which we won't easily be able to recreate later.
-                 */
-
-                .macro test_for_ipi, irqnr, irqstat, base, tmp
-                bic     \irqnr, \irqstat, #0x1c00
-                cmp     \irqnr, #16
-                it      cc
-                strcc   \irqstat, [\base, #GIC_CPU_EOI]
-                it      cs
-                cmpcs   \irqnr, \irqnr
-                .endm
-#endif  /* CONFIG_SMP */
-
-#else   /* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-                .macro  get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
-                ldr     \base, =OMAP2_IRQ_BASE
-#else
-                ldr     \base, =OMAP3_IRQ_BASE
-#endif
-                .endm
-
-                /* Check the pending interrupts. Note that base already set */
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-                cmp     \irqnr, #0x0
-                bne     9999f
-                ldr     \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-                cmp     \irqnr, #0x0
-                bne     9999f
-                ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-                cmp     \irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
-                bne     9999f
-                ldr     \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-                cmp     \irqnr, #0x0
-#endif
-9999:
-                ldrne   \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-                and     \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-                .endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =OMAP4_IRQ_BASE
-                .endm
-
-#endif
-
-#endif  /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
deleted file mode 100644
index 866319947760..000000000000
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END       0xf8000000UL
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 33f090ce0226..3f565dd2ea8d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -316,13 +316,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
         return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
-/* See irq.c, omap4-common.c and entry-macro.S */
-void __iomem *omap_irq_base;
-
 static void __init omap_common_init_early(void)
 {
         omap2_check_revision();
-        omap_ioremap_init();
         omap_init_consistent_dma_size();
 }
 
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 65f1be6a182c..42b1d6591912 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 
 
@@ -35,6 +36,11 @@
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG        32
 
+#define OMAP2_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET   0x0040  /* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK          0x7f    /* omap2/3 active interrupt bits */
+
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt
  * controller is identified as its own "bank". Register definitions are
@@ -143,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 
 static void __init omap_init_irq(u32 base, int nr_irqs)
 {
+        void __iomem *omap_irq_base;
         unsigned long nr_of_irqs = 0;
         unsigned int nr_banks = 0;
         int i, j;
@@ -191,6 +198,44 @@ void __init ti816x_init_irq(void)
         omap_init_irq(OMAP34XX_IC_BASE, 128);
 }
 
+static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
+{
+        u32 irqnr;
+
+        do {
+                irqnr = readl_relaxed(base_addr + 0x98);
+                if (irqnr)
+                        goto out;
+
+                irqnr = readl_relaxed(base_addr + 0xb8);
+                if (irqnr)
+                        goto out;
+
+                irqnr = readl_relaxed(base_addr + 0xd8);
+#ifdef CONFIG_SOC_OMAPTI816X
+                if (irqnr)
+                        goto out;
+                irqnr = readl_relaxed(base_addr + 0xf8);
+#endif
+
+out:
+                if (!irqnr)
+                        break;
+
+                irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
+                irqnr &= ACTIVEIRQ_MASK;
+
+                if (irqnr)
+                        handle_IRQ(irqnr, regs);
+        } while (irqnr);
+}
+
+asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
+{
+        void __iomem *base_addr = OMAP2_IRQ_BASE;
+        omap_intc_handle_irq(base_addr, regs);
+}
+
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 
@@ -263,4 +308,10 @@ void omap3_intc_resume_idle(void)
         /* Re-enable autoidle */
         intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
 }
+
+asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
+{
+        void __iomem *base_addr = OMAP3_IRQ_BASE;
+        omap_intc_handle_irq(base_addr, regs);
+}
 #endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index f327d7472ca7..beecfdd56ea3 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -29,11 +29,11 @@
 void __iomem *l2cache_base;
 #endif
 
-void __iomem *gic_dist_base_addr;
-
-
 void __init gic_init_irq(void)
 {
+        void __iomem *omap_irq_base;
+        void __iomem *gic_dist_base_addr;
+
         /* Static mapping, never released */
         gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
         BUG_ON(!gic_dist_base_addr);
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
index c5196101a237..e9d9afdc2659 100644
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -15,31 +15,6 @@
 
 #define IO_SPACE_LIMIT          0xffffffff
 
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-        void __iomem *retval;
-        unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
-        if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
-            size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
-                retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
-        } else {
-                retval = __arm_ioremap(paddr, size, mtype);
-        }
-
-        return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-        if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
-            addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
-                __iounmap(addr);
-}
-
-#define __arch_ioremap          __arch_ioremap
-#define __arch_iounmap          __arch_iounmap
 #define __io(a)                 __typesafe_io(a)
 #define __mem_pci(a)            (a)
 
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
deleted file mode 100644
index 06b50aeff7b9..000000000000
--- a/arch/arm/mach-orion5x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END       0xfd800000UL
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
index c550b6363488..e5ec4a8d9bcb 100644
--- a/arch/arm/mach-picoxcell/Makefile
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -1,3 +1,2 @@
 obj-y   := common.o
 obj-y   += time.o
-obj-y   += io.o
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index 34d08347be5f..febee47bc116 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -11,16 +11,30 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
 
 #include <mach/map.h>
 #include <mach/picoxcell_soc.h>
 
 #include "common.h"
 
+static struct map_desc io_map __initdata = {
+        .virtual        = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+        .pfn            = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+        .length         = PICOXCELL_PERIPH_LENGTH,
+        .type           = MT_DEVICE,
+};
+
+static void __init picoxcell_map_io(void)
+{
+        iotable_init(&io_map, 1);
+}
+
 static void __init picoxcell_init_machine(void)
 {
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -33,22 +47,20 @@ static const char *picoxcell_dt_match[] = {
 };
 
 static const struct of_device_id vic_of_match[] __initconst = {
-        { .compatible = "arm,pl192-vic" },
+        { .compatible = "arm,pl192-vic", .data = vic_of_init, },
         { /* Sentinel */ }
 };
 
 static void __init picoxcell_init_irq(void)
 {
-        vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
-        vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
-        irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
-        irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+        of_irq_init(vic_of_match);
 }
 
 DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
         .map_io         = picoxcell_map_io,
-        .nr_irqs        = ARCH_NR_IRQS,
+        .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = picoxcell_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &picoxcell_timer,
         .init_machine   = picoxcell_init_machine,
         .dt_compat      = picoxcell_dt_match,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index 5263f0fa095c..83d55ab956a4 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -13,6 +13,5 @@
 #include <asm/mach/time.h>
 
 extern struct sys_timer picoxcell_timer;
-extern void picoxcell_map_io(void);
 
 #endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
index a6b09f75d9df..9b505ac00be9 100644
--- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -9,11 +9,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
+        .macro  disable_fiq
+        .endm
 
-#define VA_VIC0         IO_ADDRESS(PICOXCELL_VIC0_BASE)
-#define VA_VIC1         IO_ADDRESS(PICOXCELL_VIC1_BASE)
-
-#include <asm/entry-macro-vic2.S>
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
index 4d13ed970919..59eac1ee2820 100644
--- a/arch/arm/mach-picoxcell/include/mach/irqs.h
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -1,8 +1,6 @@
 /*
  * Copyright (c) 2011 Picochip Ltd., Jamie Iles
  *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -16,10 +14,7 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define ARCH_NR_IRQS                    64
-#define NR_IRQS                         (128 + ARCH_NR_IRQS)
-
-#define IRQ_VIC0_BASE                   0
-#define IRQ_VIC1_BASE                   32
+/* We dynamically allocate our irq_desc's. */
+#define NR_IRQS                         0
 
 #endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/memory.h b/arch/arm/mach-picoxcell/include/mach/memory.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/memory.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
deleted file mode 100644
index 0216cc4b1f0b..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/vmalloc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#define VMALLOC_END     0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
deleted file mode 100644
index 39e9b9e8cc37..000000000000
--- a/arch/arm/mach-picoxcell/io.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/of.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
-#include "common.h"
-
-void __init picoxcell_map_io(void)
-{
-        struct map_desc io_map = {
-                .virtual        = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
-                .pfn            = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
-                .length         = PICOXCELL_PERIPH_LENGTH,
-                .type           = MT_DEVICE,
-        };
-
-        iotable_init(&io_map, 1);
-}
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
deleted file mode 100644
index 184913c71141..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h
index 66b1ae2e553f..6f243532570c 100644
--- a/arch/arm/mach-prima2/include/mach/map.h
+++ b/arch/arm/mach-prima2/include/mach/map.h
@@ -9,8 +9,10 @@
 #ifndef __MACH_PRIMA2_MAP_H__
 #define __MACH_PRIMA2_MAP_H__
 
-#include <mach/vmalloc.h>
+#include <linux/const.h>
 
-#define SIRFSOC_VA(x)                   (VMALLOC_END + ((x) & 0x00FFF000))
+#define SIRFSOC_VA_BASE         _AC(0xFEC00000, UL)
+
+#define SIRFSOC_VA(x)           (SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
 
 #endif
diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h
deleted file mode 100644
index c9f90fec78e3..000000000000
--- a/arch/arm/mach-prima2/include/mach/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/ach-prima2/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <linux/const.h>
-
-#define VMALLOC_END    _AC(0xFEC00000, UL)
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index a73bc86a3c26..260c0c17692a 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -7,45 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                mrc     p15, 0, \tmp, c0, c0, 0         @ CPUID
-                mov     \tmp, \tmp, lsr #13
-                and     \tmp, \tmp, #0x7                @ Core G
-                cmp     \tmp, #1
-                bhi     1002f
-
-                @ Core Generation 1 (PXA25x)
-                mov     \base, #io_p2v(0x40000000)      @ IIR Ctl = 0x40d00000
-                add     \base, \base, #0x00d00000
-                ldr     \irqstat, [\base, #0]           @ ICIP
-                ldr     \irqnr, [\base, #4]             @ ICMR
-
-                ands    \irqnr, \irqstat, \irqnr
-                beq     1001f
-                rsb     \irqstat, \irqnr, #0
-                and     \irqstat, \irqstat, \irqnr
-                clz     \irqnr, \irqstat
-                rsb     \irqnr, \irqnr, #(31 + PXA_IRQ(0))
-                b       1001f
-1002:
-                @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
-                mrc     p6, 0, \irqstat, c5, c0, 0      @ ICHP
-                tst     \irqstat, #0x80000000
-                beq     1001f
-                bic     \irqstat, \irqstat, #0x80000000
-                mov     \irqnr, \irqstat, lsr #16
-                add     \irqnr, \irqnr, #(PXA_IRQ(0))
-1001:
-                .endm
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
deleted file mode 100644
index bfecfbf5f460..000000000000
--- a/arch/arm/mach-pxa/include/mach/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/vmalloc.h
- *
- * Author:      Nicolas Pitre
- * Copyright:   (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 4071164aebaa..e8a5179c2653 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -7,8 +7,6 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
 
                 .macro  disable_fiq
                 .endm
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
deleted file mode 100644
index a2a4c6861407..000000000000
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END             0xf8000000UL
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 4b796241dd76..f92a920cf507 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -91,8 +91,8 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 
 static struct map_desc realview_eb11mp_io_desc[] __initdata = {
         {
-                .virtual        = IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE),
-                .pfn            = __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE),
+                .virtual        = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
+                .pfn            = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
                 .length         = SZ_4K,
                 .type           = MT_DEVICE,
         }, {
@@ -469,6 +469,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
         .timer          = &realview_eb_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = realview_eb_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 09e630bfa446..8ec37b29e0fa 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -392,6 +392,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pb1176_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = realview_pb1176_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index e38e85b6472d..f035fda8b619 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -366,6 +366,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pb11mp_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = realview_pb11mp_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 04d1e4953090..0109c8b440cc 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -316,6 +316,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pba8_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = realview_pba8_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index d515452323ab..0194b3e26dc1 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -98,8 +98,8 @@ static struct map_desc realview_pbx_io_desc[] __initdata = {
 
 static struct map_desc realview_local_io_desc[] __initdata = {
         {
-                .virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
-                .pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+                .virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
+                .pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
                 .length         = SZ_4K,
                 .type           = MT_DEVICE,
         }, {
@@ -399,6 +399,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
         .timer          = &realview_pbx_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = realview_pbx_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
deleted file mode 100644
index fb700228637a..000000000000
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/vmalloc.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       0xdc000000UL
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
deleted file mode 100644
index 7a311e8dddba..000000000000
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *                    http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index dd362604dcce..dc2bc15142ce 100644
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -12,7 +12,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/map.h>
-#include <mach/irqs.h>
+                .macro  disable_fiq
+                .endm
 
-#include <asm/entry-macro-vic2.S>
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
deleted file mode 100644
index 23f75e556a30..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *                    http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index a2ea6e5ee465..b86f2779e4e6 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -30,6 +30,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -237,6 +238,7 @@ MACHINE_START(ANW6410, "A&W6410")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = anw6410_map_io,
         .init_machine   = anw6410_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 3615d83d7b5a..f1c848aa4a1e 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -37,6 +37,7 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -712,6 +713,7 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
         /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = crag6410_map_io,
         .init_machine   = crag6410_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 8707bee2f0d8..521e07b8501b 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -268,6 +269,7 @@ MACHINE_START(HMT, "Airgoo-HMT")
         /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = hmt_map_io,
         .init_machine   = hmt_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 4fba2328a04b..c34c2ab22ead 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,6 +24,7 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -346,6 +347,7 @@ MACHINE_START(MINI6410, "MINI6410")
         /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = mini6410_map_io,
         .init_machine   = mini6410_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 9ec4d5710733..0efa2ba783b2 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -25,6 +25,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -100,6 +101,7 @@ MACHINE_START(NCP, "NCP")
         /* Maintainer: Samsung Electronics */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = ncp_map_io,
         .init_machine   = ncp_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 0cb7116d7b59..be2a9a22ab74 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,6 +25,7 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -327,6 +328,7 @@ MACHINE_START(REAL6410, "REAL6410")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = real6410_map_io,
         .init_machine   = real6410_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index f1f57bd5ce1c..3f42431d4dda 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -148,6 +149,7 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
         /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smartq_map_io,
         .init_machine   = smartq5_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 63117d84182e..e5c09b6db967 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -164,6 +165,7 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
         /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smartq_map_io,
         .init_machine   = smartq7_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 64375d7dda5d..5f096534f4c4 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,6 +22,7 @@
 
 #include <asm/mach-types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -89,6 +90,7 @@ MACHINE_START(SMDK6400, "SMDK6400")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6400_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6400_map_io,
         .init_machine   = smdk6400_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index f239b0a53a6f..ca6fc204f0ea 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -43,6 +43,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -701,6 +702,7 @@ MACHINE_START(SMDK6410, "SMDK6410")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6410_map_io,
         .init_machine   = smdk6410_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
index 10b62b4f8211..fbb246d0a3df 100644
--- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -10,7 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/map.h>
-#include <plat/irqs.h>
+                .macro  disable_fiq
+                .endm
 
-#include <asm/entry-macro-vic2.S>
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
deleted file mode 100644
index 38dcc71a03cc..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 14ace6d282e6..34d98a1dae57 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -27,6 +27,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -243,6 +244,7 @@ MACHINE_START(SMDK6440, "SMDK6440")
         .atag_offset    = 0x100,
 
         .init_irq       = s5p6440_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6440_map_io,
         .init_machine   = smdk6440_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 924478a19b9a..135cf5d84737 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -27,6 +27,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -263,6 +264,7 @@ MACHINE_START(SMDK6450, "SMDK6450")
         .atag_offset    = 0x100,
 
         .init_irq       = s5p6450_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6450_map_io,
         .init_machine   = smdk6450_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index ba76af052c81..b8c242edfa22 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,39 +12,14 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
         .macro  disable_fiq
         .endm
 
         .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =VA_VIC0
         .endm
 
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
 
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-        @ check the vic0
-        mov     \irqnr, # S5P_IRQ_OFFSET + 31
-        ldr     \irqstat, [ \base, # VIC_IRQ_STATUS ]
-        teq     \irqstat, #0
-
-        @ otherwise try vic1
-        addeq   \tmp, \base, #(VA_VIC1 - VA_VIC0)
-        addeq   \irqnr, \irqnr, #32
-        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-        teqeq   \irqstat, #0
-
-        @ otherwise try vic2
-        addeq   \tmp, \base, #(VA_VIC2 - VA_VIC0)
-        addeq   \irqnr, \irqnr, #32
-        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-        teqeq   \irqstat, #0
-
-        clzne   \irqstat, \irqstat
-        subne   \irqnr, \irqnr, \irqstat
         .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
deleted file mode 100644
index 44c8e5726d9d..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index ead292ce1e0d..674d22992f3c 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,6 +25,7 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -251,6 +252,7 @@ MACHINE_START(SMDKC100, "SMDKC100")
         /* Maintainer: Byungho Min <bhmin@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pc100_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdkc100_map_io,
         .init_machine   = smdkc100_machine_init,
         .timer          = &s3c24xx_timer,
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
index 3aa41ac59f07..bebca1b5d0b1 100644
--- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -10,45 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =VA_VIC0
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-        @ check the vic0
-        mov     \irqnr, # S5P_IRQ_OFFSET + 31
-        ldr     \irqstat, [ \base, # VIC_IRQ_STATUS ]
-        teq     \irqstat, #0
-
-        @ otherwise try vic1
-        addeq   \tmp, \base, #(VA_VIC1 - VA_VIC0)
-        addeq   \irqnr, \irqnr, #32
-        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-        teqeq   \irqstat, #0
-
-        @ otherwise try vic2
-        addeq   \tmp, \base, #(VA_VIC2 - VA_VIC0)
-        addeq   \irqnr, \irqnr, #32
-        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-        teqeq   \irqstat, #0
-
-        @ otherwise try vic3
-        addeq   \tmp, \base, #(VA_VIC3 - VA_VIC0)
-        addeq   \irqnr, \irqnr, #32
-        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-        teqeq   \irqstat, #0
-
-        clzne   \irqstat, \irqstat
-        subne   \irqnr, \irqnr, \irqstat
-        .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
deleted file mode 100644
index a6c659d68a5d..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * S5PV210 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END     0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index edc52968315d..6f7dfe993c12 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,6 +22,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -681,6 +682,7 @@ MACHINE_START(AQUILA, "Aquila")
            Kyungmin Park <kyungmin.park@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = aquila_map_io,
         .init_machine   = aquila_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index b5a1dc3ed9c1..12c693717398 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -957,6 +958,7 @@ MACHINE_START(GONI, "GONI")
         /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = goni_map_io,
         .init_machine   = goni_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 553319f70e52..9405da4ae3a3 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/sysdev.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -139,6 +140,7 @@ MACHINE_START(SMDKC110, "SMDKC110")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdkc110_map_io,
         .init_machine   = smdkc110_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 9c6de5704312..cf4da7393822 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -317,6 +318,7 @@ MACHINE_START(SMDKV210, "SMDKV210")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = smdkv210_map_io,
         .init_machine   = smdkv210_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index db6409a3abdf..74e99bc0dc9b 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -128,6 +129,7 @@ MACHINE_START(TORBRECK, "TORBRECK")
         /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
+        .handle_irq     = vic_handle_irq,
         .map_io         = torbreck_map_io,
         .init_machine   = torbreck_machine_init,
         .timer          = &s5p_timer,
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
deleted file mode 100644
index b3d002398480..000000000000
--- a/arch/arm/mach-sa1100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
deleted file mode 100644
index b10df988526d..000000000000
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/vmalloc.h
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 737bdc631b0d..5ca1f9d66995 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -28,7 +28,6 @@ pfc-$(CONFIG_ARCH_SH73A0)	+= pfc-sh73a0.o
 obj-$(CONFIG_ARCH_SH7367)       += entry-intc.o
 obj-$(CONFIG_ARCH_SH7377)       += entry-intc.o
 obj-$(CONFIG_ARCH_SH7372)       += entry-intc.o
-obj-$(CONFIG_ARCH_SH73A0)       += entry-gic.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)           += suspend.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 7119b87cbfa0..f71fa3c13c8c 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -609,7 +609,7 @@ MACHINE_START(AG5EVM, "ag5evm")
         .map_io         = ag5evm_map_io,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = sh73a0_init_irq,
-        .handle_irq     = shmobile_handle_irq_gic,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = ag5evm_init,
         .timer          = &ag5evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index f44150b5ae46..857ceeec1bb0 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -551,7 +551,7 @@ MACHINE_START(KOTA2, "kota2")
         .map_io         = kota2_map_io,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = sh73a0_init_irq,
-        .handle_irq     = shmobile_handle_irq_gic,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = kota2_init,
         .timer          = &kota2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/entry-gic.S b/arch/arm/mach-shmobile/entry-gic.S
deleted file mode 100644
index e20239b08c83..000000000000
--- a/arch/arm/mach-shmobile/entry-gic.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * ARM Interrupt demux handler using GIC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2011 Paul Mundt
- * Copyright (C) 2010 - 2011 Renesas Solutions Corp.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/assembler.h>
-#include <asm/entry-macro-multi.S>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/entry-macro-gic.S>
-
-        arch_irq_handler shmobile_handle_irq_gic
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 834bd6cd508f..4bf82c156771 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -7,7 +7,6 @@ extern void shmobile_secondary_vector(void);
 struct clk;
 extern int clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
-extern void shmobile_handle_irq_gic(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
 extern void (*shmobile_cpuidle_modes[])(void);
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index 8d4a416d4285..2a57b2964ee9 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -18,14 +18,5 @@
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        .endm
-
-        .macro  test_for_ipi, irqnr, irqstat, base, tmp
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
deleted file mode 100644
index 2b8fd8b942fe..000000000000
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_VMALLOC_H
-#define __ASM_MACH_VMALLOC_H
-
-/* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000UL
-
-#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 53da4224ba3d..de3bb41c8e9e 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,35 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =VA_SPEAR3XX_ML1_VIC_BASE
-                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get status
-                teq     \irqstat, #0
-                beq     1001f                           @ this will set/reset
-                                                        @ zero register
-                /*
-                 * Following code will find bit position of least significang
-                 * bit set in irqstat, using following equation
-                 * least significant bit set in n = (n & ~(n-1))
-                 */
-                sub     \tmp, \irqstat, #1              @ tmp = irqstat - 1
-                mvn     \tmp, \tmp                      @ tmp = ~tmp
-                and     \irqstat, \irqstat, \tmp        @ irqstat &= tmp
-                /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
-                clz     \tmp, \irqstat                  @ tmp = leading zeros
-                rsb     \irqnr, \tmp, #0x1F             @ irqnr = 32 - tmp - 1
-
-1001:           /* EQ will be set if no irqs pending */
-                .endm
diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
deleted file mode 100644
index df977b3c9a63..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 8b429f05b613..3462ab9d6122 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -67,6 +68,7 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
         .atag_offset    =       0x100,
         .map_io         =       spear3xx_map_io,
         .init_irq       =       spear3xx_init_irq,
+        .handle_irq     =       vic_handle_irq,
         .timer          =       &spear3xx_timer,
         .init_machine   =       spear300_evb_init,
         .restart        =       spear_restart,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index a11d6ead0aed..f92c4993f65a 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -73,6 +74,7 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
         .atag_offset    =       0x100,
         .map_io         =       spear3xx_map_io,
         .init_irq       =       spear3xx_init_irq,
+        .handle_irq     =       vic_handle_irq,
         .timer          =       &spear3xx_timer,
         .init_machine   =       spear310_evb_init,
         .restart        =       spear_restart,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 4239a70686c5..105334ab7021 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -71,6 +72,7 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
         .atag_offset    =       0x100,
         .map_io         =       spear3xx_map_io,
         .init_irq       =       spear3xx_init_irq,
+        .handle_irq     =       vic_handle_irq,
         .timer          =       &spear3xx_timer,
         .init_machine   =       spear320_evb_init,
         .restart        =       spear_restart,
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
index 8a0b0ed7b203..d490a910d925 100644
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -11,44 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
-                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get status
-                mov     \irqnr, #0
-                teq     \irqstat, #0
-                bne     1001f
-                ldr     \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
-                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get status
-                teq     \irqstat, #0
-                beq     1002f                           @ this will set/reset
-                                                        @ zero register
-                mov     \irqnr, #32
-1001:
-                /*
-                 * Following code will find bit position of least significang
-                 * bit set in irqstat, using following equation
-                 * least significant bit set in n = (n & ~(n-1))
-                 */
-                sub     \tmp, \irqstat, #1              @ tmp = irqstat - 1
-                mvn     \tmp, \tmp                      @ tmp = ~tmp
-                and     \irqstat, \irqstat, \tmp        @ irqstat &= tmp
-                /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
-                clz     \tmp, \irqstat                  @ tmp = leading zeros
-
-                rsb     \tmp, \tmp, #0x1F               @ tmp = 32 - tmp - 1
-                add     \irqnr, \irqnr, \tmp
-
-1002:           /* EQ will be set if no irqs pending */
-                .endm
diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
deleted file mode 100644
index 4a0b56cb2a91..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif  /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index 0a16559ba264..c6e4254741cc 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -46,6 +47,7 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
         .atag_offset    =       0x100,
         .map_io         =       spear6xx_map_io,
         .init_irq       =       spear6xx_init_irq,
+        .handle_irq     =       vic_handle_irq,
         .timer          =       &spear6xx_timer,
         .init_machine   =       spear600_evb_init,
         .restart        =       spear_restart,
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 91a07e187208..5be8e9eefc95 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -18,20 +18,20 @@ obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)                 += pcie.o
 obj-$(CONFIG_USB_SUPPORT)               += usb_phy.o
 
-obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
-obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
-obj-${CONFIG_MACH_HARMONY}              += board-harmony-pcie.o
-obj-${CONFIG_MACH_HARMONY}              += board-harmony-power.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pinmux.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pcie.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony-power.o
 
-obj-${CONFIG_MACH_PAZ00}                += board-paz00.o
-obj-${CONFIG_MACH_PAZ00}                += board-paz00-pinmux.o
+obj-$(CONFIG_MACH_PAZ00)                += board-paz00.o
+obj-$(CONFIG_MACH_PAZ00)                += board-paz00-pinmux.o
 
-obj-${CONFIG_MACH_SEABOARD}             += board-seaboard.o
-obj-${CONFIG_MACH_SEABOARD}             += board-seaboard-pinmux.o
+obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard.o
+obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
 
-obj-${CONFIG_MACH_TEGRA_DT}             += board-dt.o
-obj-${CONFIG_MACH_TEGRA_DT}             += board-harmony-pinmux.o
-obj-${CONFIG_MACH_TEGRA_DT}             += board-seaboard-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
 
-obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice.o
-obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice-pinmux.o
+obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
+obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index aaaa17c9d21a..e417a8383dbb 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -32,6 +32,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-tegra.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -130,6 +131,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_dt_init,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 7eaa52de756c..70ee674131f9 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
 #include <asm/setup.h>
 
 #include <mach/tegra_wm8903_pdata.h>
@@ -187,6 +188,7 @@ MACHINE_START(HARMONY, "harmony")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_harmony_init,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 28c97e317407..33d6205ad307 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -29,6 +29,7 @@
 #include <linux/gpio.h>
 #include <linux/rfkill-gpio.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -190,6 +191,7 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_paz00_init,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 9b2eca1f5283..c1599eb8e0cb 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -34,6 +34,7 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 
 #include "board.h"
 #include "board-seaboard.h"
@@ -284,6 +285,7 @@ MACHINE_START(SEABOARD, "seaboard")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_seaboard_init,
         .restart        = tegra_assert_system_reset,
@@ -294,6 +296,7 @@ MACHINE_START(KAEN, "kaen")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_kaen_init,
         .restart        = tegra_assert_system_reset,
@@ -304,6 +307,7 @@ MACHINE_START(WARIO, "wario")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_wario_init,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 1fa9e48e8ec6..c242314a1db5 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
@@ -176,6 +177,7 @@ MACHINE_START(TRIMSLICE, "trimslice")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra_init_early,
         .init_irq       = tegra_init_irq,
+        .handle_irq     = gic_handle_irq,
         .timer          = &tegra_timer,
         .init_machine   = tegra_trimslice_init,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index dd165c53889d..e577cfe27e72 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -12,45 +12,9 @@
  * GNU General Public License for more details.
  *
  */
-#include <mach/iomap.h>
-#include <mach/io.h>
 
-#if defined(CONFIG_ARM_GIC)
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-        /* Uses the GIC interrupt controller built into the cpu */
-#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  get_irqnr_preamble, base, tmp
-        movw \base, #(ICTRL_BASE & 0x0000ffff)
-        movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-#else
-        /* legacy interrupt controller for AP16 */
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        @ enable imprecise aborts
-        cpsie   a
-        @ EVP base at 0xf010f000
-        mov \base, #0xf0000000
-        orr \base, #0x00100000
-        orr \base, #0x0000f000
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        ldr \irqnr, [\base, #0x20]      @ EVT_IRQ_STS
-        cmp \irqnr, #0x80
-        .endm
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index 35a011fbc42d..f15defffb5d2 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -71,12 +71,6 @@
 
 #ifndef __ASSEMBLER__
 
-#define __arch_ioremap          tegra_ioremap
-#define __arch_iounmap          tegra_iounmap
-
-void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
-void tegra_iounmap(volatile void __iomem *addr);
-
 #define IO_ADDRESS(n) (IO_TO_VIRT(n))
 
 #ifdef CONFIG_TEGRA_PCI
diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h
deleted file mode 100644
index fd6aa65b2dc6..000000000000
--- a/arch/arm/mach-tegra/include/mach/vmalloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/vmalloc.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *      Colin Cross <ccross@google.com>
- *      Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_VMALLOC_H
-#define __MACH_TEGRA_VMALLOC_H
-
-#include <asm/sizes.h>
-
-#define VMALLOC_END        0xFE000000UL
-
-#endif
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index 5489f8b5d6ad..d23ee2db2827 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -60,24 +60,3 @@ void __init tegra_map_common_io(void)
 {
         iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
 }
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-        void __iomem *v = IO_ADDRESS(p);
-        if (v == NULL)
-                v = __arm_ioremap(p, size, type);
-        return v;
-}
-EXPORT_SYMBOL(tegra_ioremap);
-
-void tegra_iounmap(volatile void __iomem *addr)
-{
-        unsigned long virt = (unsigned long)addr;
-
-        if (virt >= VMALLOC_START && virt < VMALLOC_END)
-                __iounmap(addr);
-}
-EXPORT_SYMBOL(tegra_iounmap);
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 4956c3cea731..8ad82af6a293 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -28,10 +28,6 @@
 
 #include "board.h"
 
-#define INT_SYS_NR      (INT_GPIO_BASE - INT_PRI_BASE)
-#define INT_SYS_SZ      (INT_SEC_BASE - INT_PRI_BASE)
-#define PPI_NR          ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ)
-
 #define ICTLR_CPU_IEP_VFIQ      0x08
 #define ICTLR_CPU_IEP_FIR       0x14
 #define ICTLR_CPU_IEP_FIR_SET   0x18
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
index 20731ae39d38..7181d6ac6651 100644
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -8,33 +8,9 @@
  * Low-level IRQ helper macros for ST-Ericsson U300
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
 
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        ldr     \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
-        ldr     \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
-        mov     \irqnr, #0
-        teq     \irqstat, #0
-        bne     1002f
-1001:   ldr     \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
-        ldr     \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
-        mov     \irqnr, #32
-        teq     \irqstat, #0
-        beq     1003f
-1002:   tst     \irqstat, #1
-        bne     1003f
-        add     \irqnr, \irqnr, #1
-        movs    \irqstat, \irqstat, lsr #1
-        bne     1002b
-1003:           /* EQ will be set if no irqs pending */
-        .endm
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
deleted file mode 100644
index c808f347a081..000000000000
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/memory.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Memory virtual/physical mapping constants.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET        UL(0x48000000)
-#define BOOT_PARAMS_OFFSET      0x100
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
deleted file mode 100644
index ec423b92b81d..000000000000
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/vmalloc.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Virtual memory allocations
- * End must be above the I/O registers and on an even 2MiB boundary.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define VMALLOC_END     0xfe800000UL
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index a75c9b839748..f30c69d91d99 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/memory.h>
@@ -46,9 +47,10 @@ static void __init u300_init_machine(void)
 
 MACHINE_START(U300, MACH_U300_STRING)
         /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-        .atag_offset    = BOOT_PARAMS_OFFSET,
+        .atag_offset    = 0x100,
         .map_io         = u300_map_io,
         .init_irq       = u300_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &u300_timer,
         .init_machine   = u300_init_machine,
         .restart        = u300_restart,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bdd7b80dd7ad..de1f5f8f7330 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -33,6 +33,7 @@
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
@@ -695,6 +696,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
         .timer          = &ux500_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = mop500_init_machine,
 MACHINE_END
 
@@ -703,6 +705,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         .timer          = &ux500_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = hrefv60_init_machine,
 MACHINE_END
 
@@ -712,5 +715,6 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
         .timer          = &ux500_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = snowball_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 82025ba70c03..fe1569b67c91 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -12,6 +12,7 @@
 #include <linux/i2c.h>
 #include <linux/mfd/ab5500/ab5500.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -149,5 +150,6 @@ MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
         .map_io         = u5500_map_io,
         .init_irq       = ux500_init_irq,
         .timer          = &ux500_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = u5500_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index 071bba94f727..e16299e1020a 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -10,8 +10,6 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
 
                 .macro  disable_fiq
                 .endm
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
deleted file mode 100644
index a4945cb41172..000000000000
--- a/arch/arm/mach-ux500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END     0xf0000000UL
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index b7a6a4b1a1de..cbcda61162d3 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -141,11 +141,6 @@ static struct map_desc versatile_io_desc[] __initdata = {
         },
 #ifdef CONFIG_MACH_VERSATILE_AB
         {
-                .virtual        =  IO_ADDRESS(VERSATILE_GPIO0_BASE),
-                .pfn            = __phys_to_pfn(VERSATILE_GPIO0_BASE),
-                .length         = SZ_4K,
-                .type           = MT_DEVICE
-        }, {
                 .virtual        =  IO_ADDRESS(VERSATILE_IB2_BASE),
                 .pfn            = __phys_to_pfn(VERSATILE_IB2_BASE),
                 .length         = SZ_64M,
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index e6f7c1663160..b6f0dbf122ee 100644
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -7,39 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
 
                 .macro  disable_fiq
                 .endm
 
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
-                .endm
-
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \irqstat, [\base, #VIC_IRQ_STATUS]      @ get masked status
-                mov     \irqnr, #0
-                teq     \irqstat, #0
-                beq     1003f
-
-1001:           tst     \irqstat, #15
-                bne     1002f
-                add     \irqnr, \irqnr, #4
-                movs    \irqstat, \irqstat, lsr #4
-                bne     1001b
-1002:           tst     \irqstat, #1
-                bne     1003f
-                add     \irqnr, \irqnr, #1
-                movs    \irqstat, \irqstat, lsr #1
-                bne     1002b
-1003:           /* EQ will be set if no irqs pending */
-
-@               clz     \irqnr, \irqstat
-@1003:          /* EQ will be set if we reach MAXIRQNUM */
-                .endm
-
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
deleted file mode 100644
index 7d8e069ad51b..000000000000
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END             0xd8000000UL
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f1277ac92fac..63b8dd2b9f4d 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -27,6 +27,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -39,6 +40,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &versatile_timer,
         .init_machine   = versatile_init,
         .restart        = versatile_restart,
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index f48f2e4b667d..ae5ad3c8f3dd 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -45,6 +46,7 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &versatile_timer,
         .init_machine   = versatile_dt_init,
         .dt_compat      = versatile_dt_match,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 839bea633821..7aab79b665e7 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -107,6 +108,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
+        .handle_irq     = vic_handle_irq,
         .timer          = &versatile_timer,
         .init_machine   = versatile_pb_init,
         .restart        = versatile_restart,
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
index 73c11297509e..a14f9e62ca92 100644
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
         .macro  disable_fiq
         .endm
 
diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h
deleted file mode 100644
index f43a36ef678b..000000000000
--- a/arch/arm/mach-vexpress/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END             0xf8000000UL
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b9a465bd2d0f..6dd10e320ef6 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -23,6 +23,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/sp810.h>
+#include <asm/hardware/gic.h>
 
 #include <mach/ct-ca9x4.h>
 #include <mach/motherboard.h>
@@ -447,6 +448,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
         .init_early     = v2m_init_early,
         .init_irq       = v2m_init_irq,
         .timer          = &v2m_timer,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = v2m_init,
         .restart        = v2m_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h
deleted file mode 100644
index 4642290ce416..000000000000
--- a/arch/arm/mach-vt8500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END     0xd0000000UL
diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h
deleted file mode 100644
index b067e44500a4..000000000000
--- a/arch/arm/mach-w90x900/include/mach/vmalloc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END       (0xe0000000UL)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 73e93687b81a..ab5cfddc0d7b 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -112,6 +112,7 @@ static const char *xilinx_dt_match[] = {
 MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
         .map_io         = xilinx_map_io,
         .init_irq       = xilinx_irq_init,
+        .handle_irq     = gic_handle_irq,
         .init_machine   = xilinx_init_machine,
         .timer          = &xttcpss_sys_timer,
         .dt_compat      = xilinx_dt_match,
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
index 3cfc01b37461..d621fb732569 100644
--- a/arch/arm/mach-zynq/include/mach/entry-macro.S
+++ b/arch/arm/mach-zynq/include/mach/entry-macro.S
@@ -20,9 +20,6 @@
  * GNU General Public License for more details.
  */
 
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
-
                 .macro  disable_fiq
                 .endm
 
diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h
deleted file mode 100644
index 2398eff1e8b8..000000000000
--- a/arch/arm/mach-zynq/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/vmalloc.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_VMALLOC_H__
-#define __MACH_VMALLOC_H__
-
-#define VMALLOC_END       0xE0000000UL
-
-#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0b66d6..5cf7922ff5e7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -629,6 +629,23 @@ config IO_36
 
 comment "Processor Features"
 
+config ARM_LPAE
+        bool "Support for the Large Physical Address Extension"
+        depends on MMU && CPU_V7
+        help
+          Say Y if you have an ARMv7 processor supporting the LPAE page
+          table format and you would like to access memory beyond the
+          4GB limit. The resulting kernel image will not run on
+          processors without the LPA extension.
+
+          If unsure, say N.
+
+config ARCH_PHYS_ADDR_T_64BIT
+        def_bool ARM_LPAE
+
+config ARCH_DMA_ADDR_T_64BIT
+        bool
+
 config ARM_THUMB
         bool "Support Thumb user binaries"
         depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index c335c76e0d88..caf14dc059e5 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -968,7 +968,7 @@ static int __init alignment_init(void)
                 ai_usermode = safe_usermode(ai_usermode, false);
         }
 
-        hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+        hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
                         "alignment exception");
 
         /*
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 93aac068da94..ee9bb363d606 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -22,6 +22,21 @@ unsigned int cpu_last_asid = ASID_FIRST_VERSION;
 DEFINE_PER_CPU(struct mm_struct *, current_mm);
 #endif
 
+#ifdef CONFIG_ARM_LPAE
+#define cpu_set_asid(asid) {                                            \
+        unsigned long ttbl, ttbh;                                       \
+        asm volatile(                                                   \
+        "       mrrc    p15, 0, %0, %1, c2              @ read TTBR0\n" \
+        "       mov     %1, %2, lsl #(48 - 32)          @ set ASID\n"   \
+        "       mcrr    p15, 0, %0, %1, c2              @ set TTBR0\n"  \
+        : "=&r" (ttbl), "=&r" (ttbh)                                    \
+        : "r" (asid & ~ASID_MASK));                                     \
+}
+#else
+#define cpu_set_asid(asid) \
+        asm("   mcr     p15, 0, %0, c13, c0, 1\n" : : "r" (asid))
+#endif
+
 /*
  * We fork()ed a process, and we need a new context for the child
  * to run in.  We reserve version 0 for initial tasks so we will
@@ -37,7 +52,7 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 static void flush_context(void)
 {
         /* set the reserved ASID before flushing the TLB */
-        asm("mcr        p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+        cpu_set_asid(0);
         isb();
         local_flush_tlb_all();
         if (icache_is_vivt_asid_tagged()) {
@@ -99,7 +114,7 @@ static void reset_context(void *info)
         set_mm_context(mm, asid);
 
         /* set the new ASID */
-        asm("mcr        p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id));
+        cpu_set_asid(mm->context.id);
         isb();
 }
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index aa33949fef60..eb5520fc755f 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -27,19 +27,6 @@
 
 #include "fault.h"
 
-/*
- * Fault status register encodings.  We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF              (1 << 31)
-#define FSR_WRITE               (1 << 11)
-#define FSR_FS4                 (1 << 10)
-#define FSR_FS3_0               (15)
-
-static inline int fsr_fs(unsigned int fsr)
-{
-        return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
-}
-
 #ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
@@ -123,8 +110,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
                 pte = pte_offset_map(pmd, addr);
                 printk(", *pte=%08llx", (long long)pte_val(*pte));
+#ifndef CONFIG_ARM_LPAE
                 printk(", *ppte=%08llx",
                        (long long)pte_val(pte[PTE_HWTABLE_PTRS]));
+#endif
                 pte_unmap(pte);
         } while(0);
 
@@ -441,6 +430,12 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
         pmd = pmd_offset(pud, addr);
         pmd_k = pmd_offset(pud_k, addr);
 
+#ifdef CONFIG_ARM_LPAE
+        /*
+         * Only one hardware entry per PMD with LPAE.
+         */
+        index = 0;
+#else
         /*
          * On ARM one Linux PGD entry contains two hardware entries (see page
          * tables layout in pgtable.h). We normally guarantee that we always
@@ -450,6 +445,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
          * for the first of pair.
          */
         index = (addr >> SECTION_SHIFT) & 1;
+#endif
         if (pmd_none(pmd_k[index]))
                 goto bad_area;
 
@@ -489,55 +485,20 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
         return 1;
 }
 
-static struct fsr_info {
+struct fsr_info {
         int     (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
         int     sig;
         int     code;
         const char *name;
-} fsr_info[] = {
-        /*
-         * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
-         * defines these to be "precise" aborts.
-         */
-        { do_bad,               SIGSEGV, 0,             "vector exception"                 },
-        { do_bad,               SIGBUS,  BUS_ADRALN,    "alignment exception"              },
-        { do_bad,               SIGKILL, 0,             "terminal exception"               },
-        { do_bad,               SIGBUS,  BUS_ADRALN,    "alignment exception"              },
-        { do_bad,               SIGBUS,  0,             "external abort on linefetch"      },
-        { do_translation_fault, SIGSEGV, SEGV_MAPERR,   "section translation fault"        },
-        { do_bad,               SIGBUS,  0,             "external abort on linefetch"      },
-        { do_page_fault,        SIGSEGV, SEGV_MAPERR,   "page translation fault"           },
-        { do_bad,               SIGBUS,  0,             "external abort on non-linefetch"  },
-        { do_bad,               SIGSEGV, SEGV_ACCERR,   "section domain fault"             },
-        { do_bad,               SIGBUS,  0,             "external abort on non-linefetch"  },
-        { do_bad,               SIGSEGV, SEGV_ACCERR,   "page domain fault"                },
-        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
-        { do_sect_fault,        SIGSEGV, SEGV_ACCERR,   "section permission fault"         },
-        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
-        { do_page_fault,        SIGSEGV, SEGV_ACCERR,   "page permission fault"            },
-        /*
-         * The following are "imprecise" aborts, which are signalled by bit
-         * 10 of the FSR, and may not be recoverable.  These are only
-         * supported if the CPU abort handler supports bit 10.
-         */
-        { do_bad,               SIGBUS,  0,             "unknown 16"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 17"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 18"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 19"                       },
-        { do_bad,               SIGBUS,  0,             "lock abort"                       }, /* xscale */
-        { do_bad,               SIGBUS,  0,             "unknown 21"                       },
-        { do_bad,               SIGBUS,  BUS_OBJERR,    "imprecise external abort"         }, /* xscale */
-        { do_bad,               SIGBUS,  0,             "unknown 23"                       },
-        { do_bad,               SIGBUS,  0,             "dcache parity error"              }, /* xscale */
-        { do_bad,               SIGBUS,  0,             "unknown 25"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 26"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 27"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 28"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 29"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 30"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 31"                       }
 };
 
+/* FSR definition */
+#ifdef CONFIG_ARM_LPAE
+#include "fsr-3level.c"
+#else
+#include "fsr-2level.c"
+#endif
+
 void __init
 hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
                 int sig, int code, const char *name)
@@ -573,42 +534,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
         arm_notify_die("", regs, &info, fsr, 0);
 }
 
-
-static struct fsr_info ifsr_info[] = {
-        { do_bad,               SIGBUS,  0,             "unknown 0"                        },
-        { do_bad,               SIGBUS,  0,             "unknown 1"                        },
-        { do_bad,               SIGBUS,  0,             "debug event"                      },
-        { do_bad,               SIGSEGV, SEGV_ACCERR,   "section access flag fault"        },
-        { do_bad,               SIGBUS,  0,             "unknown 4"                        },
-        { do_translation_fault, SIGSEGV, SEGV_MAPERR,   "section translation fault"        },
-        { do_bad,               SIGSEGV, SEGV_ACCERR,   "page access flag fault"           },
-        { do_page_fault,        SIGSEGV, SEGV_MAPERR,   "page translation fault"           },
-        { do_bad,               SIGBUS,  0,             "external abort on non-linefetch"  },
-        { do_bad,               SIGSEGV, SEGV_ACCERR,   "section domain fault"             },
-        { do_bad,               SIGBUS,  0,             "unknown 10"                       },
-        { do_bad,               SIGSEGV, SEGV_ACCERR,   "page domain fault"                },
-        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
-        { do_sect_fault,        SIGSEGV, SEGV_ACCERR,   "section permission fault"         },
-        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
-        { do_page_fault,        SIGSEGV, SEGV_ACCERR,   "page permission fault"            },
-        { do_bad,               SIGBUS,  0,             "unknown 16"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 17"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 18"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 19"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 20"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 21"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 22"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 23"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 24"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 25"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 26"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 27"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 28"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 29"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 30"                       },
-        { do_bad,               SIGBUS,  0,             "unknown 31"                       },
-};
-
 void __init
 hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
                  int sig, int code, const char *name)
@@ -641,6 +566,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
         arm_notify_die("", regs, &info, ifsr, 0);
 }
 
+#ifndef CONFIG_ARM_LPAE
 static int __init exceptions_init(void)
 {
         if (cpu_architecture() >= CPU_ARCH_ARMv6) {
@@ -663,3 +589,4 @@ static int __init exceptions_init(void)
 }
 
 arch_initcall(exceptions_init);
+#endif
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 49e9e3804de4..cf08bdfbe0d6 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -1,3 +1,28 @@
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+#ifndef __ARCH_ARM_FAULT_H
+#define __ARCH_ARM_FAULT_H
+
+/*
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF              (1 << 31)
+#define FSR_WRITE               (1 << 11)
+#define FSR_FS4                 (1 << 10)
+#define FSR_FS3_0               (15)
+#define FSR_FS5_0               (0x3f)
+
+#ifdef CONFIG_ARM_LPAE
+static inline int fsr_fs(unsigned int fsr)
+{
+        return fsr & FSR_FS5_0;
+}
+#else
+static inline int fsr_fs(unsigned int fsr)
+{
+        return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+#endif
 
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
 unsigned long search_exception_table(unsigned long addr);
+
+#endif  /* __ARCH_ARM_FAULT_H */
diff --git a/arch/arm/mm/fsr-2level.c b/arch/arm/mm/fsr-2level.c
new file mode 100644
index 000000000000..18ca74c0f341
--- /dev/null
+++ b/arch/arm/mm/fsr-2level.c
@@ -0,0 +1,78 @@
+static struct fsr_info fsr_info[] = {
+        /*
+         * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
+         * defines these to be "precise" aborts.
+         */
+        { do_bad,               SIGSEGV, 0,             "vector exception"                 },
+        { do_bad,               SIGBUS,  BUS_ADRALN,    "alignment exception"              },
+        { do_bad,               SIGKILL, 0,             "terminal exception"               },
+        { do_bad,               SIGBUS,  BUS_ADRALN,    "alignment exception"              },
+        { do_bad,               SIGBUS,  0,             "external abort on linefetch"      },
+        { do_translation_fault, SIGSEGV, SEGV_MAPERR,   "section translation fault"        },
+        { do_bad,               SIGBUS,  0,             "external abort on linefetch"      },
+        { do_page_fault,        SIGSEGV, SEGV_MAPERR,   "page translation fault"           },
+        { do_bad,               SIGBUS,  0,             "external abort on non-linefetch"  },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "section domain fault"             },
+        { do_bad,               SIGBUS,  0,             "external abort on non-linefetch"  },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "page domain fault"                },
+        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
+        { do_sect_fault,        SIGSEGV, SEGV_ACCERR,   "section permission fault"         },
+        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
+        { do_page_fault,        SIGSEGV, SEGV_ACCERR,   "page permission fault"            },
+        /*
+         * The following are "imprecise" aborts, which are signalled by bit
+         * 10 of the FSR, and may not be recoverable.  These are only
+         * supported if the CPU abort handler supports bit 10.
+         */
+        { do_bad,               SIGBUS,  0,             "unknown 16"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 17"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 18"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 19"                       },
+        { do_bad,               SIGBUS,  0,             "lock abort"                       }, /* xscale */
+        { do_bad,               SIGBUS,  0,             "unknown 21"                       },
+        { do_bad,               SIGBUS,  BUS_OBJERR,    "imprecise external abort"         }, /* xscale */
+        { do_bad,               SIGBUS,  0,             "unknown 23"                       },
+        { do_bad,               SIGBUS,  0,             "dcache parity error"              }, /* xscale */
+        { do_bad,               SIGBUS,  0,             "unknown 25"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 26"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 27"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 28"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 29"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 30"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 31"                       },
+};
+
+static struct fsr_info ifsr_info[] = {
+        { do_bad,               SIGBUS,  0,             "unknown 0"                        },
+        { do_bad,               SIGBUS,  0,             "unknown 1"                        },
+        { do_bad,               SIGBUS,  0,             "debug event"                      },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "section access flag fault"        },
+        { do_bad,               SIGBUS,  0,             "unknown 4"                        },
+        { do_translation_fault, SIGSEGV, SEGV_MAPERR,   "section translation fault"        },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "page access flag fault"           },
+        { do_page_fault,        SIGSEGV, SEGV_MAPERR,   "page translation fault"           },
+        { do_bad,               SIGBUS,  0,             "external abort on non-linefetch"  },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "section domain fault"             },
+        { do_bad,               SIGBUS,  0,             "unknown 10"                       },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "page domain fault"                },
+        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
+        { do_sect_fault,        SIGSEGV, SEGV_ACCERR,   "section permission fault"         },
+        { do_bad,               SIGBUS,  0,             "external abort on translation"    },
+        { do_page_fault,        SIGSEGV, SEGV_ACCERR,   "page permission fault"            },
+        { do_bad,               SIGBUS,  0,             "unknown 16"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 17"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 18"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 19"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 20"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 21"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 22"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 23"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 24"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 25"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 26"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 27"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 28"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 29"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 30"                       },
+        { do_bad,               SIGBUS,  0,             "unknown 31"                       },
+};
diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c
new file mode 100644
index 000000000000..05a4e9431836
--- /dev/null
+++ b/arch/arm/mm/fsr-3level.c
@@ -0,0 +1,68 @@
+static struct fsr_info fsr_info[] = {
+        { do_bad,               SIGBUS,  0,             "unknown 0"                     },
+        { do_bad,               SIGBUS,  0,             "unknown 1"                     },
+        { do_bad,               SIGBUS,  0,             "unknown 2"                     },
+        { do_bad,               SIGBUS,  0,             "unknown 3"                     },
+        { do_bad,               SIGBUS,  0,             "reserved translation fault"    },
+        { do_translation_fault, SIGSEGV, SEGV_MAPERR,   "level 1 translation fault"     },
+        { do_translation_fault, SIGSEGV, SEGV_MAPERR,   "level 2 translation fault"     },
+        { do_page_fault,        SIGSEGV, SEGV_MAPERR,   "level 3 translation fault"     },
+        { do_bad,               SIGBUS,  0,             "reserved access flag fault"    },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "level 1 access flag fault"     },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "level 2 access flag fault"     },
+        { do_page_fault,        SIGSEGV, SEGV_ACCERR,   "level 3 access flag fault"     },
+        { do_bad,               SIGBUS,  0,             "reserved permission fault"     },
+        { do_bad,               SIGSEGV, SEGV_ACCERR,   "level 1 permission fault"      },
+        { do_sect_fault,        SIGSEGV, SEGV_ACCERR,   "level 2 permission fault"      },
+        { do_page_fault,        SIGSEGV, SEGV_ACCERR,   "level 3 permission fault"      },
+        { do_bad,               SIGBUS,  0,             "synchronous external abort"    },
+        { do_bad,               SIGBUS,  0,             "asynchronous external abort"   },
+        { do_bad,               SIGBUS,  0,             "unknown 18"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 19"                    },
+        { do_bad,               SIGBUS,  0,             "synchronous abort (translation table walk)" },
+        { do_bad,               SIGBUS,  0,             "synchronous abort (translation table walk)" },
+        { do_bad,               SIGBUS,  0,             "synchronous abort (translation table walk)" },
+        { do_bad,               SIGBUS,  0,             "synchronous abort (translation table walk)" },
+        { do_bad,               SIGBUS,  0,             "synchronous parity error"      },
+        { do_bad,               SIGBUS,  0,             "asynchronous parity error"     },
+        { do_bad,               SIGBUS,  0,             "unknown 26"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 27"                    },
+        { do_bad,               SIGBUS,  0,             "synchronous parity error (translation table walk" },
+        { do_bad,               SIGBUS,  0,             "synchronous parity error (translation table walk" },
+        { do_bad,               SIGBUS,  0,             "synchronous parity error (translation table walk" },
+        { do_bad,               SIGBUS,  0,             "synchronous parity error (translation table walk" },
+        { do_bad,               SIGBUS,  0,             "unknown 32"                    },
+        { do_bad,               SIGBUS,  BUS_ADRALN,    "alignment fault"               },
+        { do_bad,               SIGBUS,  0,             "debug event"                   },
+        { do_bad,               SIGBUS,  0,             "unknown 35"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 36"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 37"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 38"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 39"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 40"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 41"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 42"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 43"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 44"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 45"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 46"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 47"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 48"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 49"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 50"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 51"                    },
+        { do_bad,               SIGBUS,  0,             "implementation fault (lockdown abort)" },
+        { do_bad,               SIGBUS,  0,             "unknown 53"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 54"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 55"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 56"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 57"                    },
+        { do_bad,               SIGBUS,  0,             "implementation fault (coprocessor abort)" },
+        { do_bad,               SIGBUS,  0,             "unknown 59"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 60"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 61"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 62"                    },
+        { do_bad,               SIGBUS,  0,             "unknown 63"                    },
+};
+
+#define ifsr_info       fsr_info
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 296ad2eaddb0..feacf4c76712 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -1,9 +1,38 @@
 #include <linux/kernel.h>
 
 #include <asm/cputype.h>
+#include <asm/idmap.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
+pgd_t *idmap_pgd;
+
+#ifdef CONFIG_ARM_LPAE
+static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
+        unsigned long prot)
+{
+        pmd_t *pmd;
+        unsigned long next;
+
+        if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
+                pmd = pmd_alloc_one(&init_mm, addr);
+                if (!pmd) {
+                        pr_warning("Failed to allocate identity pmd.\n");
+                        return;
+                }
+                pud_populate(&init_mm, pud, pmd);
+                pmd += pmd_index(addr);
+        } else
+                pmd = pmd_offset(pud, addr);
+
+        do {
+                next = pmd_addr_end(addr, end);
+                *pmd = __pmd((addr & PMD_MASK) | prot);
+                flush_pmd_entry(pmd);
+        } while (pmd++, addr = next, addr != end);
+}
+#else   /* !CONFIG_ARM_LPAE */
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
         unsigned long prot)
 {
@@ -15,6 +44,7 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
         pmd[1] = __pmd(addr);
         flush_pmd_entry(pmd);
 }
+#endif  /* CONFIG_ARM_LPAE */
 
 static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
         unsigned long prot)
@@ -28,11 +58,11 @@ static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
         } while (pud++, addr = next, addr != end);
 }
 
-void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
+static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
 {
         unsigned long prot, next;
 
-        prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+        prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
         if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
                 prot |= PMD_BIT4;
 
@@ -43,48 +73,41 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
         } while (pgd++, addr = next, addr != end);
 }
 
-#ifdef CONFIG_SMP
-static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end)
-{
-        pmd_t *pmd = pmd_offset(pud, addr);
-        pmd_clear(pmd);
-}
+extern char  __idmap_text_start[], __idmap_text_end[];
 
-static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end)
+static int __init init_static_idmap(void)
 {
-        pud_t *pud = pud_offset(pgd, addr);
-        unsigned long next;
+        phys_addr_t idmap_start, idmap_end;
 
-        do {
-                next = pud_addr_end(addr, end);
-                idmap_del_pmd(pud, addr, next);
-        } while (pud++, addr = next, addr != end);
-}
+        idmap_pgd = pgd_alloc(&init_mm);
+        if (!idmap_pgd)
+                return -ENOMEM;
 
-void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end)
-{
-        unsigned long next;
+        /* Add an identity mapping for the physical address of the section. */
+        idmap_start = virt_to_phys((void *)__idmap_text_start);
+        idmap_end = virt_to_phys((void *)__idmap_text_end);
 
-        pgd += pgd_index(addr);
-        do {
-                next = pgd_addr_end(addr, end);
-                idmap_del_pud(pgd, addr, next);
-        } while (pgd++, addr = next, addr != end);
+        pr_info("Setting up static identity map for 0x%llx - 0x%llx\n",
+                (long long)idmap_start, (long long)idmap_end);
+        identity_mapping_add(idmap_pgd, idmap_start, idmap_end);
+
+        return 0;
 }
-#endif
+early_initcall(init_static_idmap);
 
 /*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
+ * In order to soft-boot, we need to switch to a 1:1 mapping for the
+ * cpu_reset functions. This will then ensure that we have predictable
+ * results when turning off the mmu.
  */
 void setup_mm_for_reboot(void)
 {
-        /*
-         * We need to access to user-mode page tables here. For kernel threads
-         * we don't have any user-mode mappings so we use the context that we
-         * "borrowed".
-         */
-        identity_mapping_add(current->active_mm->pgd, 0, TASK_SIZE);
+        /* Clean and invalidate L1. */
+        flush_cache_all();
+
+        /* Switch to the identity mapping. */
+        cpu_switch_mm(idmap_pgd, &init_mm);
+
+        /* Flush the TLB. */
         local_flush_tlb_all();
 }
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index fbdd12ea3a58..786adddf1a86 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -20,7 +20,6 @@
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
-#include <linux/sort.h>
 
 #include <asm/mach-types.h>
 #include <asm/prom.h>
@@ -134,30 +133,18 @@ void show_mem(unsigned int filter)
 }
 
 static void __init find_limits(unsigned long *min, unsigned long *max_low,
-        unsigned long *max_high)
+                               unsigned long *max_high)
 {
         struct meminfo *mi = &meminfo;
         int i;
 
-        *min = -1UL;
-        *max_low = *max_high = 0;
-
-        for_each_bank (i, mi) {
-                struct membank *bank = &mi->bank[i];
-                unsigned long start, end;
-
-                start = bank_pfn_start(bank);
-                end = bank_pfn_end(bank);
-
-                if (*min > start)
-                        *min = start;
-                if (*max_high < end)
-                        *max_high = end;
-                if (bank->highmem)
-                        continue;
-                if (*max_low < end)
-                        *max_low = end;
-        }
+        /* This assumes the meminfo array is properly sorted */
+        *min = bank_pfn_start(&mi->bank[0]);
+        for_each_bank (i, mi)
+                if (mi->bank[i].highmem)
+                                break;
+        *max_low = bank_pfn_end(&mi->bank[i - 1]);
+        *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
 }
 
 static void __init arm_bootmem_init(unsigned long start_pfn,
@@ -319,19 +306,10 @@ static void arm_memory_present(void)
 }
 #endif
 
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-        const struct membank *a = _a, *b = _b;
-        long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-        return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
 void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 {
         int i;
 
-        sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
         memblock_init();
         for (i = 0; i < mi->nr_banks; i++)
                 memblock_add(mi->bank[i].start, mi->bank[i].size);
@@ -403,8 +381,6 @@ void __init bootmem_init(void)
          */
         arm_bootmem_free(min, max_low, max_high);
 
-        high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1;
-
         /*
          * This doesn't seem to be used by the Linux memory manager any
          * more, but is used by ll_rw_block.  If we can get rid of it, we
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index bdb248c4f55c..80632e8d7538 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -36,12 +36,6 @@
 #include <asm/mach/map.h>
 #include "mm.h"
 
-/*
- * Used by ioremap() and iounmap() code to mark (super)section-mapped
- * I/O regions in vm_struct->flags field.
- */
-#define VM_ARM_SECTION_MAPPING  0x80000000
-
 int ioremap_page(unsigned long virt, unsigned long phys,
                  const struct mem_type *mtype)
 {
@@ -64,7 +58,7 @@ void __check_kvm_seq(struct mm_struct *mm)
         } while (seq != init_mm.context.kvm_seq);
 }
 
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Section support is unsafe on SMP - If you iounmap and ioremap a region,
  * the other CPUs will not see this change until their next context switch.
@@ -79,13 +73,16 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
         unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
         pgd_t *pgd;
+        pud_t *pud;
+        pmd_t *pmdp;
 
         flush_cache_vunmap(addr, end);
         pgd = pgd_offset_k(addr);
+        pud = pud_offset(pgd, addr);
+        pmdp = pmd_offset(pud, addr);
         do {
-                pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+                pmd_t pmd = *pmdp;
 
-                pmd = *pmdp;
                 if (!pmd_none(pmd)) {
                         /*
                          * Clear the PMD from the page table, and
@@ -104,8 +101,8 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
                                 pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
                 }
 
-                addr += PGDIR_SIZE;
-                pgd++;
+                addr += PMD_SIZE;
+                pmdp += 2;
         } while (addr < end);
 
         /*
@@ -124,6 +121,8 @@ remap_area_sections(unsigned long virt, unsigned long pfn,
 {
         unsigned long addr = virt, end = virt + size;
         pgd_t *pgd;
+        pud_t *pud;
+        pmd_t *pmd;
 
         /*
          * Remove and free any PTE-based mapping, and
@@ -132,17 +131,17 @@ remap_area_sections(unsigned long virt, unsigned long pfn,
         unmap_area_sections(virt, size);
 
         pgd = pgd_offset_k(addr);
+        pud = pud_offset(pgd, addr);
+        pmd = pmd_offset(pud, addr);
         do {
-                pmd_t *pmd = pmd_offset(pgd, addr);
-
                 pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
                 pfn += SZ_1M >> PAGE_SHIFT;
                 pmd[1] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
                 pfn += SZ_1M >> PAGE_SHIFT;
                 flush_pmd_entry(pmd);
 
-                addr += PGDIR_SIZE;
-                pgd++;
+                addr += PMD_SIZE;
+                pmd += 2;
         } while (addr < end);
 
         return 0;
@@ -154,6 +153,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 {
         unsigned long addr = virt, end = virt + size;
         pgd_t *pgd;
+        pud_t *pud;
+        pmd_t *pmd;
 
         /*
          * Remove and free any PTE-based mapping, and
@@ -162,6 +163,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
         unmap_area_sections(virt, size);
 
         pgd = pgd_offset_k(virt);
+        pud = pud_offset(pgd, addr);
+        pmd = pmd_offset(pud, addr);
         do {
                 unsigned long super_pmd_val, i;
 
@@ -170,14 +173,12 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
                 super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
 
                 for (i = 0; i < 8; i++) {
-                        pmd_t *pmd = pmd_offset(pgd, addr);
-
                         pmd[0] = __pmd(super_pmd_val);
                         pmd[1] = __pmd(super_pmd_val);
                         flush_pmd_entry(pmd);
 
-                        addr += PGDIR_SIZE;
-                        pgd++;
+                        addr += PMD_SIZE;
+                        pmd += 2;
                 }
 
                 pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
@@ -195,17 +196,13 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
         unsigned long addr;
         struct vm_struct * area;
 
+#ifndef CONFIG_ARM_LPAE
         /*
          * High mappings must be supersection aligned
          */
         if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
                 return NULL;
-
-        /*
-         * Don't allow RAM to be mapped - this causes problems with ARMv6+
-         */
-        if (WARN_ON(pfn_valid(pfn)))
-                return NULL;
+#endif
 
         type = get_mem_type(mtype);
         if (!type)
@@ -216,12 +213,40 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
          */
         size = PAGE_ALIGN(offset + size);
 
+        /*
+         * Try to reuse one of the static mapping whenever possible.
+         */
+        read_lock(&vmlist_lock);
+        for (area = vmlist; area; area = area->next) {
+                if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000))
+                        break;
+                if (!(area->flags & VM_ARM_STATIC_MAPPING))
+                        continue;
+                if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
+                        continue;
+                if (__phys_to_pfn(area->phys_addr) > pfn ||
+                    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+                        continue;
+                /* we can drop the lock here as we know *area is static */
+                read_unlock(&vmlist_lock);
+                addr = (unsigned long)area->addr;
+                addr += __pfn_to_phys(pfn) - area->phys_addr;
+                return (void __iomem *) (offset + addr);
+        }
+        read_unlock(&vmlist_lock);
+
+        /*
+         * Don't allow RAM to be mapped - this causes problems with ARMv6+
+         */
+        if (WARN_ON(pfn_valid(pfn)))
+                return NULL;
+
         area = get_vm_area_caller(size, VM_IOREMAP, caller);
         if (!area)
                 return NULL;
         addr = (unsigned long)area->addr;
 
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
         if (DOMAIN_IO == 0 &&
             (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
                cpu_is_xsc3()) && pfn >= 0x100000 &&
@@ -313,28 +338,34 @@ __arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached)
 void __iounmap(volatile void __iomem *io_addr)
 {
         void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
-#ifndef CONFIG_SMP
-        struct vm_struct **p, *tmp;
+        struct vm_struct *vm;
 
-        /*
-         * If this is a section based mapping we need to handle it
-         * specially as the VM subsystem does not know how to handle
-         * such a beast. We need the lock here b/c we need to clear
-         * all the mappings before the area can be reclaimed
-         * by someone else.
-         */
-        write_lock(&vmlist_lock);
-        for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
-                if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
-                        if (tmp->flags & VM_ARM_SECTION_MAPPING) {
-                                unmap_area_sections((unsigned long)tmp->addr,
-                                                    tmp->size);
-                        }
+        read_lock(&vmlist_lock);
+        for (vm = vmlist; vm; vm = vm->next) {
+                if (vm->addr > addr)
+                        break;
+                if (!(vm->flags & VM_IOREMAP))
+                        continue;
+                /* If this is a static mapping we must leave it alone */
+                if ((vm->flags & VM_ARM_STATIC_MAPPING) &&
+                    (vm->addr <= addr) && (vm->addr + vm->size > addr)) {
+                        read_unlock(&vmlist_lock);
+                        return;
+                }
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
+                /*
+                 * If this is a section based mapping we need to handle it
+                 * specially as the VM subsystem does not know how to handle
+                 * such a beast.
+                 */
+                if ((vm->addr == addr) &&
+                    (vm->flags & VM_ARM_SECTION_MAPPING)) {
+                        unmap_area_sections((unsigned long)vm->addr, vm->size);
                         break;
                 }
-        }
-        write_unlock(&vmlist_lock);
 #endif
+        }
+        read_unlock(&vmlist_lock);
 
         vunmap(addr);
 }
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index ad7cce3bc431..70f6d3ea4834 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -21,6 +21,20 @@ const struct mem_type *get_mem_type(unsigned int type);
 
 extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
 
+/*
+ * ARM specific vm_struct->flags bits.
+ */
+
+/* (super)section-mapped I/O regions used by ioremap()/iounmap() */
+#define VM_ARM_SECTION_MAPPING  0x80000000
+
+/* permanent static mappings from iotable_init() */
+#define VM_ARM_STATIC_MAPPING   0x40000000
+
+/* mapping type (attributes) for permanent static mappings */
+#define VM_ARM_MTYPE(mt)                ((mt) << 20)
+#define VM_ARM_MTYPE_MASK       (0x1f << 20)
+
 #endif
 
 #ifdef CONFIG_ZONE_DMA
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index dc8c550e6cbd..94c5a0c94f5e 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
 #include <linux/fs.h>
+#include <linux/vmalloc.h>
 
 #include <asm/cputype.h>
 #include <asm/sections.h>
@@ -150,6 +151,7 @@ static int __init early_nowrite(char *__unused)
 }
 early_param("nowb", early_nowrite);
 
+#ifndef CONFIG_ARM_LPAE
 static int __init early_ecc(char *p)
 {
         if (memcmp(p, "on", 2) == 0)
@@ -159,6 +161,7 @@ static int __init early_ecc(char *p)
         return 0;
 }
 early_param("ecc", early_ecc);
+#endif
 
 static int __init noalign_setup(char *__unused)
 {
@@ -228,10 +231,12 @@ static struct mem_type mem_types[] = {
                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
                 .domain    = DOMAIN_KERNEL,
         },
+#ifndef CONFIG_ARM_LPAE
         [MT_MINICLEAN] = {
                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
                 .domain    = DOMAIN_KERNEL,
         },
+#endif
         [MT_LOW_VECTORS] = {
                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
                                 L_PTE_RDONLY,
@@ -429,6 +434,7 @@ static void __init build_mem_type_table(void)
          * ARMv6 and above have extended page tables.
          */
         if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+#ifndef CONFIG_ARM_LPAE
                 /*
                  * Mark cache clean areas and XIP ROM read only
                  * from SVC mode and no access from userspace.
@@ -436,6 +442,7 @@ static void __init build_mem_type_table(void)
                 mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
                 mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+#endif
 
                 if (is_smp()) {
                         /*
@@ -474,6 +481,18 @@ static void __init build_mem_type_table(void)
                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
         }
 
+#ifdef CONFIG_ARM_LPAE
+        /*
+         * Do not generate access flag faults for the kernel mappings.
+         */
+        for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+                mem_types[i].prot_pte |= PTE_EXT_AF;
+                mem_types[i].prot_sect |= PMD_SECT_AF;
+        }
+        kern_pgprot |= PTE_EXT_AF;
+        vecs_pgprot |= PTE_EXT_AF;
+#endif
+
         for (i = 0; i < 16; i++) {
                 unsigned long v = pgprot_val(protection_map[i]);
                 protection_map[i] = __pgprot(v | user_pgprot);
@@ -529,13 +548,18 @@ EXPORT_SYMBOL(phys_mem_access_prot);
 
 #define vectors_base()  (vectors_high() ? 0xffff0000 : 0)
 
-static void __init *early_alloc(unsigned long sz)
+static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
 {
-        void *ptr = __va(memblock_alloc(sz, sz));
+        void *ptr = __va(memblock_alloc(sz, align));
         memset(ptr, 0, sz);
         return ptr;
 }
 
+static void __init *early_alloc(unsigned long sz)
+{
+        return early_alloc_aligned(sz, sz);
+}
+
 static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
 {
         if (pmd_none(*pmd)) {
@@ -572,8 +596,10 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
         if (((addr | end | phys) & ~SECTION_MASK) == 0) {
                 pmd_t *p = pmd;
 
+#ifndef CONFIG_ARM_LPAE
                 if (addr & SECTION_SIZE)
                         pmd++;
+#endif
 
                 do {
                         *pmd = __pmd(phys | type->prot_sect);
@@ -603,6 +629,7 @@ static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
         } while (pud++, addr = next, addr != end);
 }
 
+#ifndef CONFIG_ARM_LPAE
 static void __init create_36bit_mapping(struct map_desc *md,
                                         const struct mem_type *type)
 {
@@ -662,6 +689,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
                 pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
         } while (addr != end);
 }
+#endif  /* !CONFIG_ARM_LPAE */
 
 /*
  * Create the page directory entries and any necessary
@@ -685,14 +713,16 @@ static void __init create_mapping(struct map_desc *md)
         }
 
         if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-            md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+            md->virtual >= PAGE_OFFSET &&
+            (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
                 printk(KERN_WARNING "BUG: mapping for 0x%08llx"
-                       " at 0x%08lx overlaps vmalloc space\n",
+                       " at 0x%08lx out of vmalloc space\n",
                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
         }
 
         type = &mem_types[md->type];
 
+#ifndef CONFIG_ARM_LPAE
         /*
          * Catch 36-bit addresses
          */
@@ -700,6 +730,7 @@ static void __init create_mapping(struct map_desc *md)
                 create_36bit_mapping(md, type);
                 return;
         }
+#endif
 
         addr = md->virtual & PAGE_MASK;
         phys = __pfn_to_phys(md->pfn);
@@ -729,18 +760,33 @@ static void __init create_mapping(struct map_desc *md)
  */
 void __init iotable_init(struct map_desc *io_desc, int nr)
 {
-        int i;
+        struct map_desc *md;
+        struct vm_struct *vm;
+
+        if (!nr)
+                return;
 
-        for (i = 0; i < nr; i++)
-                create_mapping(io_desc + i);
+        vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
+
+        for (md = io_desc; nr; md++, nr--) {
+                create_mapping(md);
+                vm->addr = (void *)(md->virtual & PAGE_MASK);
+                vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
+                vm->phys_addr = __pfn_to_phys(md->pfn); 
+                vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; 
+                vm->flags |= VM_ARM_MTYPE(md->type);
+                vm->caller = iotable_init;
+                vm_area_add_early(vm++);
+        }
 }
 
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
+static void * __initdata vmalloc_min =
+        (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 
 /*
  * vmalloc=size forces the vmalloc area to be exactly 'size'
  * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
+ * area - the default is 240m.
  */
 static int __init early_vmalloc(char *arg)
 {
@@ -775,6 +821,9 @@ void __init sanity_check_meminfo(void)
                 struct membank *bank = &meminfo.bank[j];
                 *bank = meminfo.bank[i];
 
+                if (bank->start > ULONG_MAX)
+                        highmem = 1;
+
 #ifdef CONFIG_HIGHMEM
                 if (__va(bank->start) >= vmalloc_min ||
                     __va(bank->start) < (void *)PAGE_OFFSET)
@@ -786,7 +835,7 @@ void __init sanity_check_meminfo(void)
                  * Split those memory banks which are partially overlapping
                  * the vmalloc area greatly simplifying things later.
                  */
-                if (__va(bank->start) < vmalloc_min &&
+                if (!highmem && __va(bank->start) < vmalloc_min &&
                     bank->size > vmalloc_min - __va(bank->start)) {
                         if (meminfo.nr_banks >= NR_BANKS) {
                                 printk(KERN_CRIT "NR_BANKS too low, "
@@ -807,6 +856,17 @@ void __init sanity_check_meminfo(void)
                 bank->highmem = highmem;
 
                 /*
+                 * Highmem banks not allowed with !CONFIG_HIGHMEM.
+                 */
+                if (highmem) {
+                        printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
+                               "(!CONFIG_HIGHMEM).\n",
+                               (unsigned long long)bank->start,
+                               (unsigned long long)bank->start + bank->size - 1);
+                        continue;
+                }
+
+                /*
                  * Check whether this memory bank would entirely overlap
                  * the vmalloc area.
                  */
@@ -860,6 +920,7 @@ void __init sanity_check_meminfo(void)
         }
 #endif
         meminfo.nr_banks = j;
+        high_memory = __va(lowmem_limit - 1) + 1;
         memblock_set_current_limit(lowmem_limit);
 }
 
@@ -890,14 +951,20 @@ static inline void prepare_page_table(void)
 
         /*
          * Clear out all the kernel space mappings, except for the first
-         * memory bank, up to the end of the vmalloc region.
+         * memory bank, up to the vmalloc region.
          */
         for (addr = __phys_to_virt(end);
-             addr < VMALLOC_END; addr += PMD_SIZE)
+             addr < VMALLOC_START; addr += PMD_SIZE)
                 pmd_clear(pmd_off_k(addr));
 }
 
+#ifdef CONFIG_ARM_LPAE
+/* the first page is reserved for pgd */
+#define SWAPPER_PG_DIR_SIZE     (PAGE_SIZE + \
+                                 PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
+#else
 #define SWAPPER_PG_DIR_SIZE     (PTRS_PER_PGD * sizeof(pgd_t))
+#endif
 
 /*
  * Reserve the special regions of memory
@@ -920,8 +987,8 @@ void __init arm_mm_memblock_reserve(void)
 }
 
 /*
- * Set up device the mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * Set up the device mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_START, we will remove any debug device mappings.
  * This means you have to be careful how you debug this function, or any
  * called function.  This means you can't use any function or debugging
  * method which may touch any device, otherwise the kernel _will_ crash.
@@ -936,7 +1003,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
          */
         vectors_page = early_alloc(PAGE_SIZE);
 
-        for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
+        for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
                 pmd_clear(pmd_off_k(addr));
 
         /*
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 88417514b2c6..4fc6794cca4b 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -29,6 +29,8 @@ void __init arm_mm_memblock_reserve(void)
 
 void __init sanity_check_meminfo(void)
 {
+        phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
+        high_memory = __va(end - 1) + 1;
 }
 
 /*
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index b2027c154b2a..a3e78ccabd65 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
+#include <linux/slab.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -17,6 +18,14 @@
 
 #include "mm.h"
 
+#ifdef CONFIG_ARM_LPAE
+#define __pgd_alloc()   kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
+#define __pgd_free(pgd) kfree(pgd)
+#else
+#define __pgd_alloc()   (pgd_t *)__get_free_pages(GFP_KERNEL, 2)
+#define __pgd_free(pgd) free_pages((unsigned long)pgd, 2)
+#endif
+
 /*
  * need to get a 16k page for level 1
  */
@@ -27,7 +36,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
         pmd_t *new_pmd, *init_pmd;
         pte_t *new_pte, *init_pte;
 
-        new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+        new_pgd = __pgd_alloc();
         if (!new_pgd)
                 goto no_pgd;
 
@@ -42,10 +51,25 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 
         clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
 
+#ifdef CONFIG_ARM_LPAE
+        /*
+         * Allocate PMD table for modules and pkmap mappings.
+         */
+        new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
+                            MODULES_VADDR);
+        if (!new_pud)
+                goto no_pud;
+
+        new_pmd = pmd_alloc(mm, new_pud, 0);
+        if (!new_pmd)
+                goto no_pmd;
+#endif
+
         if (!vectors_high()) {
                 /*
                  * On ARM, first page must always be allocated since it
-                 * contains the machine vectors.
+                 * contains the machine vectors. The vectors are always high
+                 * with LPAE.
                  */
                 new_pud = pud_alloc(mm, new_pgd, 0);
                 if (!new_pud)
@@ -74,7 +98,7 @@ no_pte:
 no_pmd:
         pud_free(mm, new_pud);
 no_pud:
-        free_pages((unsigned long)new_pgd, 2);
+        __pgd_free(new_pgd);
 no_pgd:
         return NULL;
 }
@@ -111,5 +135,24 @@ no_pud:
         pgd_clear(pgd);
         pud_free(mm, pud);
 no_pgd:
-        free_pages((unsigned long) pgd_base, 2);
+#ifdef CONFIG_ARM_LPAE
+        /*
+         * Free modules/pkmap or identity pmd tables.
+         */
+        for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) {
+                if (pgd_none_or_clear_bad(pgd))
+                        continue;
+                if (pgd_val(*pgd) & L_PGD_SWAPPER)
+                        continue;
+                pud = pud_offset(pgd, 0);
+                if (pud_none_or_clear_bad(pud))
+                        continue;
+                pmd = pmd_offset(pud, 0);
+                pud_clear(pud);
+                pmd_free(mm, pmd);
+                pgd_clear(pgd);
+                pud_free(mm, pud);
+        }
+#endif
+        __pgd_free(pgd_base);
 }
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 67469665d47a..234951345eb3 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -95,6 +95,7 @@ ENTRY(cpu_arm1020_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm1020_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -107,6 +108,8 @@ ENTRY(cpu_arm1020_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm1020_reset)
+        .popsection
 
 /*
  * cpu_arm1020_do_idle()
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 4251421c0ed5..c244b06caac9 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -95,6 +95,7 @@ ENTRY(cpu_arm1020e_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm1020e_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -107,6 +108,8 @@ ENTRY(cpu_arm1020e_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm1020e_reset)
+        .popsection
 
 /*
  * cpu_arm1020e_do_idle()
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index d283cf3d06e3..38fe22efd18f 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -84,6 +84,7 @@ ENTRY(cpu_arm1022_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm1022_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -96,6 +97,8 @@ ENTRY(cpu_arm1022_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm1022_reset)
+        .popsection
 
 /*
  * cpu_arm1022_do_idle()
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 678a1ceafed2..3eb9c3c26c75 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -84,6 +84,7 @@ ENTRY(cpu_arm1026_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm1026_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -96,6 +97,8 @@ ENTRY(cpu_arm1026_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm1026_reset)
+        .popsection
 
 /*
  * cpu_arm1026_do_idle()
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index e5b974cddac3..4fbeb5b8e6c2 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -225,6 +225,7 @@ ENTRY(cpu_arm7_set_pte_ext)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+                .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm6_reset)
 ENTRY(cpu_arm7_reset)
                 mov     r1, #0
@@ -235,6 +236,9 @@ ENTRY(cpu_arm7_reset)
                 mov     r1, #0x30
                 mcr     p15, 0, r1, c1, c0, 0           @ turn off MMU etc
                 mov     pc, r0
+ENDPROC(cpu_arm6_reset)
+ENDPROC(cpu_arm7_reset)
+                .popsection
 
                 __CPUINIT
 
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 55f4e290665a..0ac908c7ade1 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -101,6 +101,7 @@ ENTRY(cpu_arm720_set_pte_ext)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+                .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm720_reset)
                 mov     ip, #0
                 mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
@@ -112,6 +113,8 @@ ENTRY(cpu_arm720_reset)
                 bic     ip, ip, #0x2100                 @ ..v....s........
                 mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
                 mov     pc, r0
+ENDPROC(cpu_arm720_reset)
+                .popsection
 
         __CPUINIT
 
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4506be3adda6..dc5de5d53f20 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -49,6 +49,7 @@ ENTRY(cpu_arm740_proc_fin)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm740_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c0, 0           @ invalidate cache
@@ -56,6 +57,8 @@ ENTRY(cpu_arm740_reset)
         bic     ip, ip, #0x0000000c             @ ............wc..
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm740_reset)
+        .popsection
 
         __CPUINIT
 
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 7e0e1fe4ed4d..6ddea3e464bd 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -45,8 +45,11 @@ ENTRY(cpu_arm7tdmi_proc_fin)
  * Params  : loc(r0)    address to jump to
  * Purpose : Sets up everything for a reset and jump to the location for soft reset.
  */
+                .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm7tdmi_reset)
                 mov     pc, r0
+ENDPROC(cpu_arm7tdmi_reset)
+                .popsection
 
                 __CPUINIT
 
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 88fb3d9e0640..cb941ae95f66 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -85,6 +85,7 @@ ENTRY(cpu_arm920_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm920_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -97,6 +98,8 @@ ENTRY(cpu_arm920_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm920_reset)
+        .popsection
 
 /*
  * cpu_arm920_do_idle()
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 490e18833857..4ec0e074dd55 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -87,6 +87,7 @@ ENTRY(cpu_arm922_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm922_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -99,6 +100,8 @@ ENTRY(cpu_arm922_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm922_reset)
+        .popsection
 
 /*
  * cpu_arm922_do_idle()
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 51d494be057e..9dccd9a365b3 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -108,6 +108,7 @@ ENTRY(cpu_arm925_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm925_reset)
         /* Send software reset to MPU and DSP */
         mov     ip, #0xff000000
@@ -115,6 +116,8 @@ ENTRY(cpu_arm925_reset)
         orr     ip, ip, #0x0000ce00
         mov     r4, #1
         strh    r4, [ip, #0x10]
+ENDPROC(cpu_arm925_reset)
+        .popsection
 
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 9f8fd91f918a..820259b81a1f 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -77,6 +77,7 @@ ENTRY(cpu_arm926_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm926_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -89,6 +90,8 @@ ENTRY(cpu_arm926_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm926_reset)
+        .popsection
 
 /*
  * cpu_arm926_do_idle()
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index ac750d506153..9fdc0a170974 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -48,6 +48,7 @@ ENTRY(cpu_arm940_proc_fin)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm940_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c5, 0           @ flush I cache
@@ -58,6 +59,8 @@ ENTRY(cpu_arm940_reset)
         bic     ip, ip, #0x00001000             @ i-cache
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm940_reset)
+        .popsection
 
 /*
  * cpu_arm940_do_idle()
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 683af3a182b7..f684cfedcca9 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -55,6 +55,7 @@ ENTRY(cpu_arm946_proc_fin)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm946_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c5, 0           @ flush I cache
@@ -65,6 +66,8 @@ ENTRY(cpu_arm946_reset)
         bic     ip, ip, #0x00001000             @ i-cache
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_arm946_reset)
+        .popsection
 
 /*
  * cpu_arm946_do_idle()
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 2120f9e2af7f..8881391dfb9e 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -45,8 +45,11 @@ ENTRY(cpu_arm9tdmi_proc_fin)
  * Params  : loc(r0)    address to jump to
  * Purpose : Sets up everything for a reset and jump to the location for soft reset.
  */
+                .pushsection    .idmap.text, "ax"
 ENTRY(cpu_arm9tdmi_reset)
                 mov     pc, r0
+ENDPROC(cpu_arm9tdmi_reset)
+                .popsection
 
                 __CPUINIT
 
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 4c7a5710472b..272558a133a3 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -57,6 +57,7 @@ ENTRY(cpu_fa526_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  4
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_fa526_reset)
 /* TODO: Use CP8 if possible... */
         mov     ip, #0
@@ -73,6 +74,8 @@ ENTRY(cpu_fa526_reset)
         nop
         nop
         mov     pc, r0
+ENDPROC(cpu_fa526_reset)
+        .popsection
 
 /*
  * cpu_fa526_do_idle()
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 8a6c2f78c1c3..ba3c500584ac 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -98,6 +98,7 @@ ENTRY(cpu_feroceon_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_feroceon_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -110,6 +111,8 @@ ENTRY(cpu_feroceon_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_feroceon_reset)
+        .popsection
 
 /*
  * cpu_feroceon_do_idle()
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 307a4def8d3a..2d8ff3ad86d3 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -91,8 +91,9 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
-     L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#if !defined (CONFIG_ARM_LPAE) && \
+        (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
+         L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
 #endif  /* CONFIG_MMU */
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index db52b0fb14a0..cdfedc5b8ad8 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -69,6 +69,7 @@ ENTRY(cpu_mohawk_proc_fin)
  * (same as arm926)
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_mohawk_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -79,6 +80,8 @@ ENTRY(cpu_mohawk_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_mohawk_reset)
+        .popsection
 
 /*
  * cpu_mohawk_do_idle()
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index d50ada26edd6..775d70fba937 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -62,6 +62,7 @@ ENTRY(cpu_sa110_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_sa110_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -74,6 +75,8 @@ ENTRY(cpu_sa110_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_sa110_reset)
+        .popsection
 
 /*
  * cpu_sa110_do_idle(type)
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 7d91545d089b..3aa0da11fd84 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -70,6 +70,7 @@ ENTRY(cpu_sa1100_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_sa1100_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
@@ -82,6 +83,8 @@ ENTRY(cpu_sa1100_reset)
         bic     ip, ip, #0x1100                 @ ...i...s........
         mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
         mov     pc, r0
+ENDPROC(cpu_sa1100_reset)
+        .popsection
 
 /*
  * cpu_sa1100_do_idle(type)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index d061d2fa5506..5900cd520e84 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -55,6 +55,7 @@ ENTRY(cpu_v6_proc_fin)
  *      - loc   - location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_v6_reset)
         mrc     p15, 0, r1, c1, c0, 0           @ ctrl register
         bic     r1, r1, #0x1                    @ ...............m
@@ -62,6 +63,8 @@ ENTRY(cpu_v6_reset)
         mov     r1, #0
         mcr     p15, 0, r1, c7, c5, 4           @ ISB
         mov     pc, r0
+ENDPROC(cpu_v6_reset)
+        .popsection
 
 /*
  *      cpu_v6_do_idle()
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
new file mode 100644
index 000000000000..3a4b3e7b888c
--- /dev/null
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -0,0 +1,171 @@
+/*
+ * arch/arm/mm/proc-v7-2level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define TTB_S           (1 << 1)
+#define TTB_RGN_NC      (0 << 3)
+#define TTB_RGN_OC_WBWA (1 << 3)
+#define TTB_RGN_OC_WT   (2 << 3)
+#define TTB_RGN_OC_WB   (3 << 3)
+#define TTB_NOS         (1 << 5)
+#define TTB_IRGN_NC     ((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA   ((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT     ((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB     ((1 << 0) | (1 << 6))
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP    TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP    PMD_SECT_WB
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP   TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP   PMD_SECT_WBWA|PMD_SECT_S
+
+/*
+ *      cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ *      Set the translation table base pointer to be pgd_phys
+ *
+ *      - pgd_phys - physical address of new TTB
+ *
+ *      It is assumed that:
+ *      - we are not using split page tables
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+        mov     r2, #0
+        ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
+        ALT_SMP(orr     r0, r0, #TTB_FLAGS_SMP)
+        ALT_UP(orr      r0, r0, #TTB_FLAGS_UP)
+#ifdef CONFIG_ARM_ERRATA_430973
+        mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
+#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+        dsb
+#endif
+        mcr     p15, 0, r2, c13, c0, 1          @ set reserved context ID
+        isb
+1:      mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
+        isb
+#ifdef CONFIG_ARM_ERRATA_754322
+        dsb
+#endif
+        mcr     p15, 0, r1, c13, c0, 1          @ set context ID
+        isb
+#endif
+        mov     pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ *      cpu_v7_set_pte_ext(ptep, pte)
+ *
+ *      Set a level 2 translation table entry.
+ *
+ *      - ptep  - pointer to level 2 translation table entry
+ *                (hardware version is stored at +2048 bytes)
+ *      - pte   - PTE value to store
+ *      - ext   - value for extended PTE bits
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+        str     r1, [r0]                        @ linux version
+
+        bic     r3, r1, #0x000003f0
+        bic     r3, r3, #PTE_TYPE_MASK
+        orr     r3, r3, r2
+        orr     r3, r3, #PTE_EXT_AP0 | 2
+
+        tst     r1, #1 << 4
+        orrne   r3, r3, #PTE_EXT_TEX(1)
+
+        eor     r1, r1, #L_PTE_DIRTY
+        tst     r1, #L_PTE_RDONLY | L_PTE_DIRTY
+        orrne   r3, r3, #PTE_EXT_APX
+
+        tst     r1, #L_PTE_USER
+        orrne   r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+        @ allow kernel read/write access to read-only user pages
+        tstne   r3, #PTE_EXT_APX
+        bicne   r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
+
+        tst     r1, #L_PTE_XN
+        orrne   r3, r3, #PTE_EXT_XN
+
+        tst     r1, #L_PTE_YOUNG
+        tstne   r1, #L_PTE_PRESENT
+        moveq   r3, #0
+
+ ARM(   str     r3, [r0, #2048]! )
+ THUMB( add     r0, r0, #2048 )
+ THUMB( str     r3, [r0] )
+        mcr     p15, 0, r0, c7, c10, 1          @ flush_pte
+#endif
+        mov     pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+        /*
+         * Memory region attributes with SCTLR.TRE=1
+         *
+         *   n = TEX[0],C,B
+         *   TR = PRRR[2n+1:2n]         - memory type
+         *   IR = NMRR[2n+1:2n]         - inner cacheable property
+         *   OR = NMRR[2n+17:2n+16]     - outer cacheable property
+         *
+         *                      n       TR      IR      OR
+         *   UNCACHED           000     00
+         *   BUFFERABLE         001     10      00      00
+         *   WRITETHROUGH       010     10      10      10
+         *   WRITEBACK          011     10      11      11
+         *   reserved           110
+         *   WRITEALLOC         111     10      01      01
+         *   DEV_SHARED         100     01
+         *   DEV_NONSHARED      100     01
+         *   DEV_WC             001     10
+         *   DEV_CACHED         011     10
+         *
+         * Other attributes:
+         *
+         *   DS0 = PRRR[16] = 0         - device shareable property
+         *   DS1 = PRRR[17] = 1         - device shareable property
+         *   NS0 = PRRR[18] = 0         - normal shareable property
+         *   NS1 = PRRR[19] = 1         - normal shareable property
+         *   NOS = PRRR[24+n] = 1       - not outer shareable
+         */
+.equ    PRRR,   0xff0a81a8
+.equ    NMRR,   0x40e040e0
+
+        /*
+         * Macro for setting up the TTBRx and TTBCR registers.
+         * - \ttb0 and \ttb1 updated with the corresponding flags.
+         */
+        .macro  v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+        mcr     p15, 0, \zero, c2, c0, 2        @ TTB control register
+        ALT_SMP(orr     \ttbr0, \ttbr0, #TTB_FLAGS_SMP)
+        ALT_UP(orr      \ttbr0, \ttbr0, #TTB_FLAGS_UP)
+        ALT_SMP(orr     \ttbr1, \ttbr1, #TTB_FLAGS_SMP)
+        ALT_UP(orr      \ttbr1, \ttbr1, #TTB_FLAGS_UP)
+        mcr     p15, 0, \ttbr1, c2, c0, 1       @ load TTB1
+        .endm
+
+        __CPUINIT
+
+        /*   AT
+         *  TFR   EV X F   I D LR    S
+         * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
+         * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+         *    1    0 110       0011 1100 .111 1101 < we want
+         */
+        .align  2
+        .type   v7_crval, #object
+v7_crval:
+        crval   clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
+
+        .previous
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
new file mode 100644
index 000000000000..8de0f1dd1549
--- /dev/null
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -0,0 +1,150 @@
+/*
+ * arch/arm/mm/proc-v7-3level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *   based on arch/arm/mm/proc-v7-2level.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define TTB_IRGN_NC     (0 << 8)
+#define TTB_IRGN_WBWA   (1 << 8)
+#define TTB_IRGN_WT     (2 << 8)
+#define TTB_IRGN_WB     (3 << 8)
+#define TTB_RGN_NC      (0 << 10)
+#define TTB_RGN_OC_WBWA (1 << 10)
+#define TTB_RGN_OC_WT   (2 << 10)
+#define TTB_RGN_OC_WB   (3 << 10)
+#define TTB_S           (3 << 12)
+#define TTB_EAE         (1 << 31)
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP    (TTB_IRGN_WB|TTB_RGN_OC_WB)
+#define PMD_FLAGS_UP    (PMD_SECT_WB)
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP   (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
+#define PMD_FLAGS_SMP   (PMD_SECT_WBWA|PMD_SECT_S)
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys (physical address of
+ * the new TTB).
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+        ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
+        and     r3, r1, #0xff
+        mov     r3, r3, lsl #(48 - 32)          @ ASID
+        mcrr    p15, 0, r0, r3, c2              @ set TTB 0
+        isb
+#endif
+        mov     pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ * - ptep - pointer to level 3 translation table entry
+ * - pte - PTE value to store (64-bit in r2 and r3)
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+        tst     r2, #L_PTE_PRESENT
+        beq     1f
+        tst     r3, #1 << (55 - 32)             @ L_PTE_DIRTY
+        orreq   r2, #L_PTE_RDONLY
+1:      strd    r2, r3, [r0]
+        mcr     p15, 0, r0, c7, c10, 1          @ flush_pte
+#endif
+        mov     pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+        /*
+         * Memory region attributes for LPAE (defined in pgtable-3level.h):
+         *
+         *   n = AttrIndx[2:0]
+         *
+         *                      n       MAIR
+         *   UNCACHED           000     00000000
+         *   BUFFERABLE         001     01000100
+         *   DEV_WC             001     01000100
+         *   WRITETHROUGH       010     10101010
+         *   WRITEBACK          011     11101110
+         *   DEV_CACHED         011     11101110
+         *   DEV_SHARED         100     00000100
+         *   DEV_NONSHARED      100     00000100
+         *   unused             101
+         *   unused             110
+         *   WRITEALLOC         111     11111111
+         */
+.equ    PRRR,   0xeeaa4400                      @ MAIR0
+.equ    NMRR,   0xff000004                      @ MAIR1
+
+        /*
+         * Macro for setting up the TTBRx and TTBCR registers.
+         * - \ttbr1 updated.
+         */
+        .macro  v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+        ldr     \tmp, =swapper_pg_dir           @ swapper_pg_dir virtual address
+        cmp     \ttbr1, \tmp                    @ PHYS_OFFSET > PAGE_OFFSET? (branch below)
+        mrc     p15, 0, \tmp, c2, c0, 2         @ TTB control register
+        orr     \tmp, \tmp, #TTB_EAE
+        ALT_SMP(orr     \tmp, \tmp, #TTB_FLAGS_SMP)
+        ALT_UP(orr      \tmp, \tmp, #TTB_FLAGS_UP)
+        ALT_SMP(orr     \tmp, \tmp, #TTB_FLAGS_SMP << 16)
+        ALT_UP(orr      \tmp, \tmp, #TTB_FLAGS_UP << 16)
+        /*
+         * TTBR0/TTBR1 split (PAGE_OFFSET):
+         *   0x40000000: T0SZ = 2, T1SZ = 0 (not used)
+         *   0x80000000: T0SZ = 0, T1SZ = 1
+         *   0xc0000000: T0SZ = 0, T1SZ = 2
+         *
+         * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
+         * booting secondary CPUs would end up using TTBR1 for the identity
+         * mapping set up in TTBR0.
+         */
+        bhi     9001f                           @ PHYS_OFFSET > PAGE_OFFSET?
+        orr     \tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
+#if defined CONFIG_VMSPLIT_2G
+        /* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
+        add     \ttbr1, \ttbr1, #1 << 4         @ skip two L1 entries
+#elif defined CONFIG_VMSPLIT_3G
+        /* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
+        add     \ttbr1, \ttbr1, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd
+#endif
+        /* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
+9001:   mcr     p15, 0, \tmp, c2, c0, 2         @ TTB control register
+        mcrr    p15, 1, \ttbr1, \zero, c2       @ load TTBR1
+        .endm
+
+        __CPUINIT
+
+        /*
+         *   AT
+         *  TFR   EV X F   IHD LR    S
+         * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
+         * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+         *   11    0 110    1  0011 1100 .111 1101 < we want
+         */
+        .align  2
+        .type   v7_crval, #object
+v7_crval:
+        crval   clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
+
+        .previous
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 2c559ac38142..7efa2a721d5d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,24 +19,11 @@
 
 #include "proc-macros.S"
 
-#define TTB_S           (1 << 1)
-#define TTB_RGN_NC      (0 << 3)
-#define TTB_RGN_OC_WBWA (1 << 3)
-#define TTB_RGN_OC_WT   (2 << 3)
-#define TTB_RGN_OC_WB   (3 << 3)
-#define TTB_NOS         (1 << 5)
-#define TTB_IRGN_NC     ((0 << 0) | (0 << 6))
-#define TTB_IRGN_WBWA   ((0 << 0) | (1 << 6))
-#define TTB_IRGN_WT     ((1 << 0) | (0 << 6))
-#define TTB_IRGN_WB     ((1 << 0) | (1 << 6))
-
-/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS_UP    TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS_UP    PMD_SECT_WB
-
-/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS_SMP   TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS_SMP   PMD_SECT_WBWA|PMD_SECT_S
+#ifdef CONFIG_ARM_LPAE
+#include "proc-v7-3level.S"
+#else
+#include "proc-v7-2level.S"
+#endif
 
 ENTRY(cpu_v7_proc_init)
         mov     pc, lr
@@ -63,6 +50,7 @@ ENDPROC(cpu_v7_proc_fin)
  *      caches disabled.
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_v7_reset)
         mrc     p15, 0, r1, c1, c0, 0           @ ctrl register
         bic     r1, r1, #0x1                    @ ...............m
@@ -71,6 +59,7 @@ ENTRY(cpu_v7_reset)
         isb
         mov     pc, r0
 ENDPROC(cpu_v7_reset)
+        .popsection
 
 /*
  *      cpu_v7_do_idle()
@@ -97,127 +86,12 @@ ENTRY(cpu_v7_dcache_clean_area)
         mov     pc, lr
 ENDPROC(cpu_v7_dcache_clean_area)
 
-/*
- *      cpu_v7_switch_mm(pgd_phys, tsk)
- *
- *      Set the translation table base pointer to be pgd_phys
- *
- *      - pgd_phys - physical address of new TTB
- *
- *      It is assumed that:
- *      - we are not using split page tables
- */
-ENTRY(cpu_v7_switch_mm)
-#ifdef CONFIG_MMU
-        mov     r2, #0
-        ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
-        ALT_SMP(orr     r0, r0, #TTB_FLAGS_SMP)
-        ALT_UP(orr      r0, r0, #TTB_FLAGS_UP)
-#ifdef CONFIG_ARM_ERRATA_430973
-        mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
-#endif
-#ifdef CONFIG_ARM_ERRATA_754322
-        dsb
-#endif
-        mcr     p15, 0, r2, c13, c0, 1          @ set reserved context ID
-        isb
-1:      mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
-        isb
-#ifdef CONFIG_ARM_ERRATA_754322
-        dsb
-#endif
-        mcr     p15, 0, r1, c13, c0, 1          @ set context ID
-        isb
-#endif
-        mov     pc, lr
-ENDPROC(cpu_v7_switch_mm)
-
-/*
- *      cpu_v7_set_pte_ext(ptep, pte)
- *
- *      Set a level 2 translation table entry.
- *
- *      - ptep  - pointer to level 2 translation table entry
- *                (hardware version is stored at +2048 bytes)
- *      - pte   - PTE value to store
- *      - ext   - value for extended PTE bits
- */
-ENTRY(cpu_v7_set_pte_ext)
-#ifdef CONFIG_MMU
-        str     r1, [r0]                        @ linux version
-
-        bic     r3, r1, #0x000003f0
-        bic     r3, r3, #PTE_TYPE_MASK
-        orr     r3, r3, r2
-        orr     r3, r3, #PTE_EXT_AP0 | 2
-
-        tst     r1, #1 << 4
-        orrne   r3, r3, #PTE_EXT_TEX(1)
-
-        eor     r1, r1, #L_PTE_DIRTY
-        tst     r1, #L_PTE_RDONLY | L_PTE_DIRTY
-        orrne   r3, r3, #PTE_EXT_APX
-
-        tst     r1, #L_PTE_USER
-        orrne   r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-        @ allow kernel read/write access to read-only user pages
-        tstne   r3, #PTE_EXT_APX
-        bicne   r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
-
-        tst     r1, #L_PTE_XN
-        orrne   r3, r3, #PTE_EXT_XN
-
-        tst     r1, #L_PTE_YOUNG
-        tstne   r1, #L_PTE_PRESENT
-        moveq   r3, #0
-
- ARM(   str     r3, [r0, #2048]! )
- THUMB( add     r0, r0, #2048 )
- THUMB( str     r3, [r0] )
-        mcr     p15, 0, r0, c7, c10, 1          @ flush_pte
-#endif
-        mov     pc, lr
-ENDPROC(cpu_v7_set_pte_ext)
-
         string  cpu_v7_name, "ARMv7 Processor"
         .align
 
-        /*
-         * Memory region attributes with SCTLR.TRE=1
-         *
-         *   n = TEX[0],C,B
-         *   TR = PRRR[2n+1:2n]         - memory type
-         *   IR = NMRR[2n+1:2n]         - inner cacheable property
-         *   OR = NMRR[2n+17:2n+16]     - outer cacheable property
-         *
-         *                      n       TR      IR      OR
-         *   UNCACHED           000     00
-         *   BUFFERABLE         001     10      00      00
-         *   WRITETHROUGH       010     10      10      10
-         *   WRITEBACK          011     10      11      11
-         *   reserved           110
-         *   WRITEALLOC         111     10      01      01
-         *   DEV_SHARED         100     01
-         *   DEV_NONSHARED      100     01
-         *   DEV_WC             001     10
-         *   DEV_CACHED         011     10
-         *
-         * Other attributes:
-         *
-         *   DS0 = PRRR[16] = 0         - device shareable property
-         *   DS1 = PRRR[17] = 1         - device shareable property
-         *   NS0 = PRRR[18] = 0         - normal shareable property
-         *   NS1 = PRRR[19] = 1         - normal shareable property
-         *   NOS = PRRR[24+n] = 1       - not outer shareable
-         */
-.equ    PRRR,   0xff0a81a8
-.equ    NMRR,   0x40e040e0
-
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl  cpu_v7_suspend_size
-.equ    cpu_v7_suspend_size, 4 * 7
+.equ    cpu_v7_suspend_size, 4 * 8
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
         stmfd   sp!, {r4 - r10, lr}
@@ -226,10 +100,11 @@ ENTRY(cpu_v7_do_suspend)
         stmia   r0!, {r4 - r5}
         mrc     p15, 0, r6, c3, c0, 0   @ Domain ID
         mrc     p15, 0, r7, c2, c0, 1   @ TTB 1
+        mrc     p15, 0, r11, c2, c0, 2  @ TTB control register
         mrc     p15, 0, r8, c1, c0, 0   @ Control register
         mrc     p15, 0, r9, c1, c0, 1   @ Auxiliary control register
         mrc     p15, 0, r10, c1, c0, 2  @ Co-processor access control
-        stmia   r0, {r6 - r10}
+        stmia   r0, {r6 - r11}
         ldmfd   sp!, {r4 - r10, pc}
 ENDPROC(cpu_v7_do_suspend)
 
@@ -241,13 +116,15 @@ ENTRY(cpu_v7_do_resume)
         ldmia   r0!, {r4 - r5}
         mcr     p15, 0, r4, c13, c0, 0  @ FCSE/PID
         mcr     p15, 0, r5, c13, c0, 3  @ User r/o thread ID
-        ldmia   r0, {r6 - r10}
+        ldmia   r0, {r6 - r11}
         mcr     p15, 0, r6, c3, c0, 0   @ Domain ID
+#ifndef CONFIG_ARM_LPAE
         ALT_SMP(orr     r1, r1, #TTB_FLAGS_SMP)
         ALT_UP(orr      r1, r1, #TTB_FLAGS_UP)
+#endif
         mcr     p15, 0, r1, c2, c0, 0   @ TTB 0
         mcr     p15, 0, r7, c2, c0, 1   @ TTB 1
-        mcr     p15, 0, ip, c2, c0, 2   @ TTB control register
+        mcr     p15, 0, r11, c2, c0, 2  @ TTB control register
         mrc     p15, 0, r4, c1, c0, 1   @ Read Auxiliary control register
         teq     r4, r9                  @ Is it already set?
         mcrne   p15, 0, r9, c1, c0, 1   @ No, so write it
@@ -377,12 +254,7 @@ __v7_setup:
         dsb
 #ifdef CONFIG_MMU
         mcr     p15, 0, r10, c8, c7, 0          @ invalidate I + D TLBs
-        mcr     p15, 0, r10, c2, c0, 2          @ TTB control register
-        ALT_SMP(orr     r4, r4, #TTB_FLAGS_SMP)
-        ALT_UP(orr      r4, r4, #TTB_FLAGS_UP)
-        ALT_SMP(orr     r8, r8, #TTB_FLAGS_SMP)
-        ALT_UP(orr      r8, r8, #TTB_FLAGS_UP)
-        mcr     p15, 0, r8, c2, c0, 1           @ load TTB1
+        v7_ttb_setup r10, r4, r8, r5            @ TTBCR, TTBRx setup
         ldr     r5, =PRRR                       @ PRRR
         ldr     r6, =NMRR                       @ NMRR
         mcr     p15, 0, r5, c10, c2, 0          @ write PRRR
@@ -404,16 +276,7 @@ __v7_setup:
         mov     pc, lr                          @ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-        /*   AT
-         *  TFR   EV X F   I D LR    S
-         * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
-         * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-         *    1    0 110       0011 1100 .111 1101 < we want
-         */
-        .type   v7_crval, #object
-v7_crval:
-        crval   clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
-
+        .align  2
 __v7_setup_stack:
         .space  4 * 11                          @ 11 registers
 
@@ -435,11 +298,11 @@ __v7_setup_stack:
          */
 .macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
         ALT_SMP(.long   PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
-                        PMD_FLAGS_SMP | \mm_mmuflags)
+                        PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
         ALT_UP(.long    PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
-                        PMD_FLAGS_UP | \mm_mmuflags)
-        .long   PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \
-                PMD_SECT_AP_READ | \io_mmuflags
+                        PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
+        .long   PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
         W(b)    \initfunc
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -452,6 +315,7 @@ __v7_setup_stack:
         .long   v7_cache_fns
 .endm
 
+#ifndef CONFIG_ARM_LPAE
         /*
          * ARM Ltd. Cortex A5 processor.
          */
@@ -471,6 +335,7 @@ __v7_ca9mp_proc_info:
         .long   0xff0ffff0
         __v7_proc __v7_ca9mp_setup
         .size   __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+#endif  /* CONFIG_ARM_LPAE */
 
         /*
          * ARM Ltd. Cortex A15 processor.
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index abf0507a08ae..b0d57869da2d 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -105,6 +105,7 @@ ENTRY(cpu_xsc3_proc_fin)
  * loc: location to jump to for soft reset
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_xsc3_reset)
         mov     r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
         msr     cpsr_c, r1                      @ reset CPSR
@@ -119,6 +120,8 @@ ENTRY(cpu_xsc3_reset)
         @ already containing those two last instructions to survive.
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I and D TLBs
         mov     pc, r0
+ENDPROC(cpu_xsc3_reset)
+        .popsection
 
 /*
  * cpu_xsc3_do_idle()
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 3277904bebaf..4ffebaa595ee 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -142,6 +142,7 @@ ENTRY(cpu_xscale_proc_fin)
  * Beware PXA270 erratum E7.
  */
         .align  5
+        .pushsection    .idmap.text, "ax"
 ENTRY(cpu_xscale_reset)
         mov     r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
         msr     cpsr_c, r1                      @ reset CPSR
@@ -160,6 +161,8 @@ ENTRY(cpu_xscale_reset)
         @ already containing those two last instructions to survive.
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
         mov     pc, r0
+ENDPROC(cpu_xscale_reset)
+        .popsection
 
 /*
  * cpu_xscale_do_idle()
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index f5aebfec4f2a..a99dc15a70f7 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_ARCH_IOP32X) += i2c.o
 obj-$(CONFIG_ARCH_IOP32X) += pci.o
 obj-$(CONFIG_ARCH_IOP32X) += setup.o
 obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += io.o
 obj-$(CONFIG_ARCH_IOP32X) += cp6.o
 obj-$(CONFIG_ARCH_IOP32X) += adma.o
 obj-$(CONFIG_ARCH_IOP32X) += pmu.o
@@ -22,7 +21,6 @@ obj-$(CONFIG_ARCH_IOP33X) += i2c.o
 obj-$(CONFIG_ARCH_IOP33X) += pci.o
 obj-$(CONFIG_ARCH_IOP33X) += setup.o
 obj-$(CONFIG_ARCH_IOP33X) += time.o
-obj-$(CONFIG_ARCH_IOP33X) += io.o
 obj-$(CONFIG_ARCH_IOP33X) += cp6.o
 obj-$(CONFIG_ARCH_IOP33X) += adma.o
 obj-$(CONFIG_ARCH_IOP33X) += pmu.o
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
deleted file mode 100644
index e15bc17db90b..000000000000
--- a/arch/arm/plat-iop/io.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * iop3xx custom ioremap implementation
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
-        unsigned int mtype)
-{
-        void __iomem * retval;
-
-        switch (cookie) {
-        case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
-                retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
-                break;
-        case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
-                retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
-                break;
-        default:
-                retval = __arm_ioremap_caller(cookie, size, mtype,
-                                __builtin_return_address(0));
-        }
-
-        return retval;
-}
-EXPORT_SYMBOL(__iop3xx_ioremap);
-
-void __iop3xx_iounmap(void __iomem *addr)
-{
-        extern void __iounmap(volatile void __iomem *addr);
-
-        switch ((u32) addr) {
-        case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
-        case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
-                goto skip;
-        }
-        __iounmap(addr);
-
-skip:
-        return;
-}
-EXPORT_SYMBOL(__iop3xx_iounmap);
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index b9f0f5f499a4..076db84f3e31 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,6 @@
 # Common support
 obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
-obj-$(CONFIG_ARM_GIC) += gic.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
deleted file mode 100644
index 12f8f8109010..000000000000
--- a/arch/arm/plat-mxc/gic.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <asm/exception.h>
-#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-{
-        u32 irqstat, irqnr;
-
-        do {
-                irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
-                irqnr = irqstat & 0x3ff;
-                if (irqnr == 1023)
-                        break;
-
-                if (irqnr > 15 && irqnr < 1021)
-                        handle_IRQ(irqnr, regs);
-#ifdef CONFIG_SMP
-                else {
-                        writel_relaxed(irqstat, gic_cpu_base_addr +
-                                                GIC_CPU_EOI);
-                        handle_IPI(irqnr, regs);
-                }
-#endif
-        } while (1);
-}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 18e5065df3c5..83cca9bcfc97 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -89,7 +89,6 @@ extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
-void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index ca5cf26a04b1..def5d30cb67e 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,19 +9,8 @@
  * published by the Free Software Foundation.
  */
 
-/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-
         .macro  disable_fiq
         .endm
 
-        .macro  get_irqnr_preamble, base, tmp
-        .endm
-
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
-
-        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        .endm
-
-        .macro test_for_ipi, irqnr, irqstat, base, tmp
-        .endm
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 97b19e7800bc..2b7c08d13e89 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,8 +12,6 @@
 #ifndef __MACH_MX1_H__
 #define __MACH_MX1_H__
 
-#include <mach/vmalloc.h>
-
 /*
  * Memory map
  */
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
deleted file mode 100644
index ef6379c474be..000000000000
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2000 Russell King.
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_VMALLOC_H__
-#define __ASM_ARCH_MXC_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END       0xf4000000UL
-
-#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 985262242f25..3df04d944e4d 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
-         usb.o fb.o io.o counter_32k.o
+         usb.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index d9f10a31e604..2ee6341fffdb 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 #include <linux/omapfb.h>
 
 #include <plat/common.h>
@@ -66,3 +67,10 @@ void __init omap_reserve(void)
         omap_vram_reserve_sdram_memblock();
         omap_dsp_reserve_sdram_memblock();
 }
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+        init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 62f4477666cb..1234944a4da0 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -247,8 +247,6 @@
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
 
-void omap_ioremap_init(void);
-
 extern u8 omap_readb(u32 pa);
 extern u16 omap_readw(u32 pa);
 extern u32 omap_readl(u32 pa);
@@ -260,12 +258,6 @@ struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
                                       struct omap_sdrc_params *sdrc_cs1);
 
-#define __arch_ioremap  omap_ioremap
-#define __arch_iounmap  omap_iounmap
-
-void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
-void omap_iounmap(volatile void __iomem *addr);
-
 extern void __init omap_init_consistent_dma_size(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index d3a9fcd53c45..ebda7382c65b 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -436,10 +436,6 @@
 #define INTCPS_NR_MIR_REGS      3
 #define INTCPS_NR_IRQS          96
 
-#ifndef __ASSEMBLY__
-extern void __iomem *omap_irq_base;
-#endif
-
 #include <mach/hardware.h>
 
 #ifdef CONFIG_FIQ
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
deleted file mode 100644
index 333871f59995..000000000000
--- a/arch/arm/plat-omap/io.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Common io.c file
- * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#define BETWEEN(p,st,sz)        ((p) >= (st) && (p) < ((st) + (sz)))
-#define XLATE(p,pst,vst)        ((void __iomem *)((p) - (pst) + (vst)))
-
-static int initialized;
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-
-        WARN(!initialized, "Do not use ioremap before init_early\n");
-
-#ifdef CONFIG_ARCH_OMAP1
-        if (cpu_class_is_omap1()) {
-                if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
-                        return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
-        }
-        if (cpu_is_omap7xx()) {
-                if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
-                        return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
-
-                if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
-                        return XLATE(p, OMAP7XX_DSPREG_BASE,
-                                        OMAP7XX_DSPREG_START);
-        }
-        if (cpu_is_omap15xx()) {
-                if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
-                        return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);
-
-                if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
-                        return XLATE(p, OMAP1510_DSPREG_BASE,
-                                        OMAP1510_DSPREG_START);
-        }
-        if (cpu_is_omap16xx()) {
-                if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
-                        return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);
-
-                if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
-                        return XLATE(p, OMAP16XX_DSPREG_BASE,
-                                        OMAP16XX_DSPREG_START);
-        }
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-        if (cpu_is_omap24xx()) {
-                if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
-                        return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
-                if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
-                        return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
-        }
-        if (cpu_is_omap2420()) {
-                if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
-                        return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
-                if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
-                        return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
-                if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
-                        return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
-        }
-        if (cpu_is_omap2430()) {
-                if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
-                        return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
-                if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
-                        return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
-                if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
-                        return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
-                if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
-                        return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
-        }
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-        if (cpu_is_ti816x()) {
-                if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
-                        return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
-        } else if (cpu_is_omap34xx()) {
-                if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
-                        return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
-                if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
-                        return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
-                if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
-                        return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
-                if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
-                        return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
-                if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
-                        return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
-                if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
-                        return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
-                if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
-                        return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
-        }
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-        if (cpu_is_omap44xx()) {
-                if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
-                        return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
-                if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
-                        return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
-                if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
-                        return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
-                if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
-                        return XLATE(p, OMAP44XX_EMIF1_PHYS,            \
-                                                        OMAP44XX_EMIF1_VIRT);
-                if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
-                        return XLATE(p, OMAP44XX_EMIF2_PHYS,            \
-                                                        OMAP44XX_EMIF2_VIRT);
-                if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
-                        return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
-                if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
-                        return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
-                if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
-                        return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
-        }
-#endif
-        return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(omap_ioremap);
-
-void omap_iounmap(volatile void __iomem *addr)
-{
-        unsigned long virt = (unsigned long)addr;
-
-        if (virt >= VMALLOC_START && virt < VMALLOC_END)
-                __iounmap(addr);
-}
-EXPORT_SYMBOL(omap_iounmap);
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-        init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-void __init omap_ioremap_init(void)
-{
-        initialized++;
-}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9b9968fa8695..8167ce66188c 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -11,6 +11,7 @@ config PLAT_S5P
         default y
         select ARM_VIC if !ARCH_EXYNOS4
         select ARM_GIC if ARCH_EXYNOS4
+        select GIC_NON_BANKED if ARCH_EXYNOS4
         select NO_IOPORT
         select ARCH_REQUIRE_GPIOLIB
         select S3C_GPIO_TRACK
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
deleted file mode 100644
index 8c8b24d07046..000000000000
--- a/arch/arm/plat-spear/include/plat/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_VMALLOC_H
-#define __PLAT_VMALLOC_H
-
-#define VMALLOC_END             0xF0000000UL
-
-#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 1f17bde52cd4..7c756fb189f7 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -109,7 +109,7 @@ struct eth_addr {
         u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static struct spi_board_info spi0_board_info[] __initdata = {
         {
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 4643ff5107c9..c56ddac85d61 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -105,7 +105,7 @@ struct eth_addr {
 };
 
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
         {
                 /*
                  * The MDIO pullups on STK1000 are a bit too weak for
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 86fab77a5a00..27bd6fbe21cb 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -50,7 +50,7 @@ struct eth_addr {
         u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1] = {
+static struct macb_platform_data __initdata eth_data[1] = {
         {
                 .phy_mask       = ~(1U << 1),
         },
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index da14fbdd4e8e..9d1efd1cd425 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -102,7 +102,7 @@ struct eth_addr {
 };
 
 static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1];
+static struct macb_platform_data __initdata eth_data[1];
 
 /*
  * The next two functions should go away as the boot loader is
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index e61bc948f959..ed137e335796 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -52,7 +52,7 @@ struct eth_addr {
 };
 
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static int ads7846_get_pendown_state_PB26(void)
 {
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c4da5cba2dbf..05358aa5ef7d 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -86,7 +86,7 @@ struct eth_addr {
         u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static struct spi_eeprom eeprom_25lc010 = {
                 .name = "25lc010",
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7fbf0dcb9afe..402a7bb72669 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1067,7 +1067,7 @@ void __init at32_setup_serial_console(unsigned int usart_id)
  * -------------------------------------------------------------------- */
 
 #ifdef CONFIG_CPU_AT32AP7000
-static struct eth_platform_data macb0_data;
+static struct macb_platform_data macb0_data;
 static struct resource macb0_resource[] = {
         PBMEM(0xfff01800),
         IRQ(25),
@@ -1076,7 +1076,7 @@ DEFINE_DEV_DATA(macb, 0);
 DEV_CLK(hclk, macb0, hsb, 8);
 DEV_CLK(pclk, macb0, pbb, 6);
 
-static struct eth_platform_data macb1_data;
+static struct macb_platform_data macb1_data;
 static struct resource macb1_resource[] = {
         PBMEM(0xfff01c00),
         IRQ(26),
@@ -1086,7 +1086,7 @@ DEV_CLK(hclk, macb1, hsb, 9);
 DEV_CLK(pclk, macb1, pbb, 7);
 
 struct platform_device *__init
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data)
 {
         struct platform_device *pdev;
         u32 pin_mask;
@@ -1163,7 +1163,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
                 return NULL;
         }
 
-        memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+        memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data));
         platform_device_register(pdev);
 
         return pdev;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 5d7ffca7d69f..67b111ce332d 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -6,6 +6,7 @@
 
 #include <linux/types.h>
 #include <linux/serial.h>
+#include <linux/platform_data/macb.h>
 
 #define GPIO_PIN_NONE   (-1)
 
@@ -42,12 +43,8 @@ struct atmel_uart_data {
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
 
-struct eth_platform_data {
-        u32     phy_mask;
-        u8      is_rmii;
-};
 struct platform_device *
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data);
 
 struct spi_board_info;
 struct platform_device *