5 files changed, 70 insertions, 97 deletions

diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 9204be6eedb3..7c724ffa08bb 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -803,7 +803,6 @@ no_apic:
 
 void __init init_apic_mappings(void)
 {
-        unsigned int orig_apicid;
         unsigned long apic_phys;
 
         /*
@@ -825,11 +824,8 @@ void __init init_apic_mappings(void)
          * Fetch the APIC ID of the BSP in case we have a
          * default configuration (or the MP table is broken).
          */
-        orig_apicid = boot_cpu_physical_apicid;
-        boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-        if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid))
-                printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)",
-                        orig_apicid, boot_cpu_physical_apicid);
+        if (boot_cpu_physical_apicid == -1U)
+                boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
 
 #ifdef CONFIG_X86_IO_APIC
         {
@@ -1259,81 +1255,40 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
 }
 
 /*
- * This initializes the IO-APIC and APIC hardware.
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
  */
-int __init APIC_init(void)
+int __init APIC_init_uniprocessor (void)
 {
-        if (enable_local_apic < 0) {
-                printk(KERN_INFO "APIC disabled\n");
-                return -1;
-        }
+        if (enable_local_apic < 0)
+                clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
 
-        /* See if we have a SMP configuration or have forced enabled
-         * the local apic.
-         */
-        if (!smp_found_config && !acpi_lapic && !cpu_has_apic) {
-                enable_local_apic = -1;
+        if (!smp_found_config && !cpu_has_apic)
                 return -1;
-        }
 
         /*
-         * Complain if the BIOS pretends there is an apic.
-         * Then get out because we don't have an a local apic.
+         * Complain if the BIOS pretends there is one.
          */
         if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
                 printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
                         boot_cpu_physical_apicid);
-                printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-                enable_local_apic = -1;
                 return -1;
         }
 
         verify_local_APIC();
 
-        /*
-         * Should not be necessary because the MP table should list the boot
-         * CPU too, but we do it for the sake of robustness anyway.
-         * Makes no sense to do this check in clustered apic mode, so skip it
-         */
-        if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-                printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-                                boot_cpu_physical_apicid);
-                physid_set(boot_cpu_physical_apicid, phys_cpu_present_map);
-        }
-
-        /*
-         * Switch from PIC to APIC mode.
-         */
         connect_bsp_APIC();
-        setup_local_APIC();
 
-#ifdef CONFIG_X86_IO_APIC
-        /*
-         * Now start the IO-APICs
-         */
-        if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-                setup_IO_APIC();
-#endif
-        return 0;
-}
+        phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
-void __init APIC_late_time_init(void)
-{
-        /* Improve our loops per jiffy estimate */
-        loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz;
-        boot_cpu_data.loops_per_jiffy = loops_per_jiffy;
-        cpu_data[0].loops_per_jiffy = loops_per_jiffy;
-
-        /* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is
-         * initialized.  So redo it here to ensure the boot cpu is setup
-         * properly.
-         */
-        if (nmi_watchdog == NMI_LOCAL_APIC)
-                setup_apic_nmi_watchdog();
+        setup_local_APIC();
 
 #ifdef CONFIG_X86_IO_APIC
-        if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-                IO_APIC_late_time_init();
+        if (smp_found_config)
+                if (!skip_ioapic_setup && nr_ioapics)
+                        setup_IO_APIC();
 #endif
         setup_boot_APIC_clock();
+
+        return 0;
 }
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
index d86f24909284..323ef8ab3244 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/i386/kernel/i8259.c
@@ -435,8 +435,4 @@ void __init init_IRQ(void)
                 setup_irq(FPU_IRQ, &fpu_irq);
 
         irq_ctx_init(smp_processor_id());
-
-#ifdef CONFIG_X86_LOCAL_APIC
-        APIC_init();
-#endif
 }
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 5a77c52b20a9..cc5d7ac5b2e7 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -2387,15 +2387,11 @@ void __init setup_IO_APIC(void)
         sync_Arb_IDs();
         setup_IO_APIC_irqs();
         init_IO_APIC_traps();
+        check_timer();
         if (!acpi_ioapic)
                 print_IO_APIC();
 }
 
-void __init IO_APIC_late_time_init(void)
-{
-        check_timer();
-}
-
 /*
  *      Called after all the initialization is done. If we didnt find any
  *      APIC bugs then we can allow the modify fast path
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 5a2bbe0c4fff..01b618e73ecd 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -1078,16 +1078,6 @@ void *xquad_portio;
 EXPORT_SYMBOL(xquad_portio);
 #endif
 
-/*
- * Fall back to non SMP mode after errors.
- *
- */
-static __init void disable_smp(void)
-{
-        cpu_set(0, cpu_sibling_map[0]);
-        cpu_set(0, cpu_core_map[0]);
-}
-
 static void __init smp_boot_cpus(unsigned int max_cpus)
 {
         int apicid, cpu, bit, kicked;
@@ -1100,6 +1090,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
         printk("CPU%d: ", 0);
         print_cpu_info(&cpu_data[0]);
 
+        boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
         boot_cpu_logical_apicid = logical_smp_processor_id();
         x86_cpu_to_apicid[0] = boot_cpu_physical_apicid;
 
@@ -1111,27 +1102,68 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
         cpus_clear(cpu_core_map[0]);
         cpu_set(0, cpu_core_map[0]);
 
-        map_cpu_to_logical_apicid();
-
         /*
          * If we couldn't find an SMP configuration at boot time,
          * get out of here now!
          */
         if (!smp_found_config && !acpi_lapic) {
                 printk(KERN_NOTICE "SMP motherboard not detected.\n");
-                disable_smp();
+                smpboot_clear_io_apic_irqs();
+                phys_cpu_present_map = physid_mask_of_physid(0);
+                if (APIC_init_uniprocessor())
+                        printk(KERN_NOTICE "Local APIC not detected."
+                                           " Using dummy APIC emulation.\n");
+                map_cpu_to_logical_apicid();
+                cpu_set(0, cpu_sibling_map[0]);
+                cpu_set(0, cpu_core_map[0]);
+                return;
+        }
+
+        /*
+         * Should not be necessary because the MP table should list the boot
+         * CPU too, but we do it for the sake of robustness anyway.
+         * Makes no sense to do this check in clustered apic mode, so skip it
+         */
+        if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+                printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
+                                boot_cpu_physical_apicid);
+                physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+        }
+
+        /*
+         * If we couldn't find a local APIC, then get out of here now!
+         */
+        if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
+                printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+                        boot_cpu_physical_apicid);
+                printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
+                smpboot_clear_io_apic_irqs();
+                phys_cpu_present_map = physid_mask_of_physid(0);
+                cpu_set(0, cpu_sibling_map[0]);
+                cpu_set(0, cpu_core_map[0]);
                 return;
         }
 
+        verify_local_APIC();
+
         /*
          * If SMP should be disabled, then really disable it!
          */
-        if (!max_cpus || (enable_local_apic < 0)) {
-                printk(KERN_INFO "SMP mode deactivated.\n");
-                disable_smp();
+        if (!max_cpus) {
+                smp_found_config = 0;
+                printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
+                smpboot_clear_io_apic_irqs();
+                phys_cpu_present_map = physid_mask_of_physid(0);
+                cpu_set(0, cpu_sibling_map[0]);
+                cpu_set(0, cpu_core_map[0]);
                 return;
         }
 
+        connect_bsp_APIC();
+        setup_local_APIC();
+        map_cpu_to_logical_apicid();
+
+
         setup_portio_remap();
 
         /*
@@ -1212,6 +1244,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
         cpu_set(0, cpu_sibling_map[0]);
         cpu_set(0, cpu_core_map[0]);
 
+        smpboot_setup_io_apic();
+
+        setup_boot_APIC_clock();
+
         /*
          * Synchronize the TSC with the AP
          */
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 07471bba2dc6..41c5b2dc6200 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -440,8 +440,8 @@ static int time_init_device(void)
 
 device_initcall(time_init_device);
 
-extern void (*late_time_init)(void);
 #ifdef CONFIG_HPET_TIMER
+extern void (*late_time_init)(void);
 /* Duplicate of time_init() below, with hpet_enable part added */
 static void __init hpet_time_init(void)
 {
@@ -458,11 +458,6 @@ static void __init hpet_time_init(void)
         printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
 
         time_init_hook();
-
-#ifdef CONFIG_X86_LOCAL_APIC
-        if (enable_local_apic >= 0)
-                APIC_late_time_init();
-#endif
 }
 #endif
 
@@ -487,9 +482,4 @@ void __init time_init(void)
         printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
 
         time_init_hook();
-
-#ifdef CONFIG_X86_LOCAL_APIC
-        if (enable_local_apic >= 0)
-                late_time_init = APIC_late_time_init;
-#endif
 }