34 files changed, 176 insertions, 176 deletions
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 4cb069fd9af2..ccdac4b6a469 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -138,7 +138,7 @@ static void am200_cleanup(struct metronomefb_par *par)
 {
        int i;
-        free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+        free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
        for (i = 0; i < ARRAY_SIZE(gpios); i++)
                gpio_free(gpios[i]);
@@ -292,7 +292,7 @@ static int am200_setup_irq(struct fb_info *info)
 {
        int ret;
-        ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+        ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
                                IRQF_DISABLED|IRQF_TRIGGER_FALLING,
                                "AM200", info->par);
        if (ret)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index fa8bad235d9f..76c4b9494031 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -176,7 +176,7 @@ static void am300_cleanup(struct broadsheetfb_par *par)
 {
        int i;
-        free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+        free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
        for (i = 0; i < ARRAY_SIZE(gpios); i++)
                gpio_free(gpios[i]);
@@ -240,7 +240,7 @@ static int am300_setup_irq(struct fb_info *info)
        int ret;
        struct broadsheetfb_par *par = info->par;
-        ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+        ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
                                IRQF_DISABLED|IRQF_TRIGGER_RISING,
                                "AM300", par);
        if (ret)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b8544e174..1c7890cdb0c9 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -179,7 +179,7 @@ static unsigned long balloon3_ac97_pin_config[] __initdata = {
 };
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-        .irq            = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+        .irq            = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
 };
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 13518a705399..4ebcee5756b1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -33,7 +33,7 @@
 /* GPIO IRQ usage */
 #define GPIO83_MMC_IRQ          (83)
-#define CMX270_MMC_IRQ          IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_MMC_IRQ          PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
 /* MMC power enable */
 #define GPIO105_MMC_POWER       (105)
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190080cb..9344a0e3ba8a 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -58,8 +58,8 @@ extern void cmx270_init(void);
 #define CMX255_GPIO_IT8152_IRQ  (0)
 #define CMX270_GPIO_IT8152_IRQ  (22)
-#define CMX255_ETHIRQ           IRQ_GPIO(GPIO22_ETHIRQ)
+#define CMX255_ETHIRQ           PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ           IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_ETHIRQ           PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource cmx255_dm9000_resource[] = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3a7387f93c38..21ac8e3e2f7a 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -64,7 +64,7 @@
 #define GPIO82_MMC_IRQ          (82)
 #define GPIO85_MMC_WP           (85)
-#define CM_X300_MMC_IRQ         IRQ_GPIO(GPIO82_MMC_IRQ)
+#define CM_X300_MMC_IRQ         PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
 #define GPIO95_RTC_CS           (95)
 #define GPIO96_RTC_WR           (96)
@@ -229,8 +229,8 @@ static struct resource dm9000_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [2] = {
-                .start  = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+                .start  = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-                .end    = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+                .end    = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        }
 };
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b01dd6..3358f4da2ec9 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -70,7 +70,7 @@
 /* common  GPIOs */
 #define GPIO11_NAND_CS          (11)
 #define GPIO41_ETHIRQ           (41)
-#define EM_X270_ETHIRQ          IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_ETHIRQ          PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN       (115)
 #define GPIO19_WLAN_STRAP       (19)
 #define GPIO9_USB_VBUS_EN       (9)
@@ -805,7 +805,7 @@ static struct spi_board_info em_x270_spi_devices[] __initdata = {
                .modalias               = "libertas_spi",
                .max_speed_hz           = 13000000,
                .bus_num                = 2,
-                .irq                    = IRQ_GPIO(116),
+                .irq                    = PXA_GPIO_TO_IRQ(116),
                .chip_select            = 0,
                .controller_data        = &em_x270_libertas_chip,
                .platform_data          = &em_x270_libertas_pdata,
@@ -1203,7 +1203,7 @@ static struct da903x_platform_data em_x270_da9030_info = {
 static struct i2c_board_info em_x270_i2c_pmic_info = {
        I2C_BOARD_INFO("da9030", 0x49),
-        .irq = IRQ_GPIO(0),
+        .irq = PXA_GPIO_TO_IRQ(0),
        .platform_data = &em_x270_da9030_info,
 };
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa3c096..e556a1e3ff0f 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -119,8 +119,8 @@ struct resource eseries_tmio_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-                .start  = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+                .start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-                .end    = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+                .end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
                .flags  = IORESOURCE_IRQ,
        },
 };
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5c376e..bb98ff57b71f 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -75,8 +75,8 @@ static struct resource smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-                .start  = IRQ_GPIO(4),
+                .start  = PXA_GPIO_TO_IRQ(4),
-                .end    = IRQ_GPIO(4),
+                .end    = PXA_GPIO_TO_IRQ(4),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        }
 };
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 6d7eab3d0867..f02fa1e6ba86 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -172,9 +172,9 @@ enum balloon3_features {
 /* Balloon3 Interrupts */
 #define BALLOON3_IRQ(x)         (IRQ_BOARD_START + (x))
-#define BALLOON3_AUX_NIRQ       IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_AUX_NIRQ       PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ      IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_CODEC_IRQ      PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ      IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+#define BALLOON3_S0_CD_IRQ      PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD)
 #define BALLOON3_NR_IRQS        (IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 5dfd1195a5a7..c9f86172520e 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -66,18 +66,18 @@
 /*
 * Corgi Interrupts
 */
-#define CORGI_IRQ_GPIO_KEY_INT          IRQ_GPIO(0)
+#define CORGI_IRQ_GPIO_KEY_INT          PXA_GPIO_TO_IRQ(0)
-#define CORGI_IRQ_GPIO_AC_IN            IRQ_GPIO(1)
+#define CORGI_IRQ_GPIO_AC_IN            PXA_GPIO_TO_IRQ(1)
-#define CORGI_IRQ_GPIO_WAKEUP           IRQ_GPIO(3)
+#define CORGI_IRQ_GPIO_WAKEUP           PXA_GPIO_TO_IRQ(3)
-#define CORGI_IRQ_GPIO_AK_INT           IRQ_GPIO(4)
+#define CORGI_IRQ_GPIO_AK_INT           PXA_GPIO_TO_IRQ(4)
-#define CORGI_IRQ_GPIO_TP_INT           IRQ_GPIO(5)
+#define CORGI_IRQ_GPIO_TP_INT           PXA_GPIO_TO_IRQ(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT       IRQ_GPIO(9)
+#define CORGI_IRQ_GPIO_nSD_DETECT       PXA_GPIO_TO_IRQ(9)
-#define CORGI_IRQ_GPIO_nSD_INT          IRQ_GPIO(10)
+#define CORGI_IRQ_GPIO_nSD_INT          PXA_GPIO_TO_IRQ(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW     IRQ_GPIO(11)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW     PXA_GPIO_TO_IRQ(11)
-#define CORGI_IRQ_GPIO_CF_CD            IRQ_GPIO(14)
+#define CORGI_IRQ_GPIO_CF_CD            PXA_GPIO_TO_IRQ(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL        IRQ_GPIO(16)    /* Battery fully charged */
+#define CORGI_IRQ_GPIO_CHRG_FULL        PXA_GPIO_TO_IRQ(16)     /* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ           IRQ_GPIO(17)
+#define CORGI_IRQ_GPIO_CF_IRQ           PXA_GPIO_TO_IRQ(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)     IRQ_GPIO(58+(a))        /* Keyboard Sense lines */
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)     PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */
 /*
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 004cade7bb13..07fa3ba7a818 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -28,7 +28,7 @@
 /* The defines for the driver are needed for the accelerated accessors */
 #include "gpio-pxa.h"
-#define gpio_to_irq(gpio)       IRQ_GPIO(gpio)
+#define gpio_to_irq(gpio)       PXA_GPIO_TO_IRQ(gpio)
 static inline int irq_to_gpio(unsigned int irq)
 {
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 9b898680b206..dba14b6503ad 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -24,7 +24,7 @@ has detected a cable insertion; driven low otherwise. */
 #define GPIO_GUMSTIX_USB_GPIOx          41
 /* usb state change */
-#define GUMSTIX_USB_INTR_IRQ            IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+#define GUMSTIX_USB_INTR_IRQ            PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
 #define GPIO_GUMSTIX_USB_GPIOn_MD       (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
 #define GPIO_GUMSTIX_USB_GPIOx_CON_MD   (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
@@ -35,7 +35,7 @@ has detected a cable insertion; driven low otherwise. */
 */
 #define GUMSTIX_GPIO_nSD_WP             22 /* SD Write Protect */
 #define GUMSTIX_GPIO_nSD_DETECT         11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT     PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
 /*
 * SMC Ethernet definitions
@@ -49,10 +49,10 @@ has detected a cable insertion; driven low otherwise. */
 #define GPIO_GUMSTIX_ETH0               36
 #define GPIO_GUMSTIX_ETH0_MD            (GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ                IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GUMSTIX_ETH0_IRQ                PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
 #define GPIO_GUMSTIX_ETH1               27
 #define GPIO_GUMSTIX_ETH1_MD            (GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ                IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+#define GUMSTIX_ETH1_IRQ                PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
 /* CF reset line */
@@ -63,18 +63,18 @@ has detected a cable insertion; driven low otherwise. */
 #define GPIO4_nSTSCHG                   GPIO4_nBVD1
 #define GPIO11_nCD                      11
 #define GPIO26_PRDY_nBSY                26
-#define GUMSTIX_S0_nSTSCHG_IRQ          IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nSTSCHG_IRQ          PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ              IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_nCD_IRQ              PXA_GPIO_TO_IRQ(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ        IRQ_GPIO(GPIO26_PRDY_nBSY)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ        PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
 /* CF slot 1 */
 #define GPIO18_nBVD1                    18
 #define GPIO18_nSTSCHG                  GPIO18_nBVD1
 #define GPIO36_nCD                      36
 #define GPIO27_PRDY_nBSY                27
-#define GUMSTIX_S1_nSTSCHG_IRQ          IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nSTSCHG_IRQ          PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ              IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_nCD_IRQ              PXA_GPIO_TO_IRQ(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ        IRQ_GPIO(GPIO27_PRDY_nBSY)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ        PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
 /* CF GPIO line modes */
 #define GPIO4_nSTSCHG_MD                (GPIO4_nSTSCHG | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 5eff96fcc944..a7f912f5ea2f 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -135,24 +135,24 @@
 /* A listing of interrupts used by external hardware devices */
-#define TOUCH_PANEL_IRQ                 IRQ_GPIO(5)
+#define TOUCH_PANEL_IRQ                 PXA_GPIO_TO_IRQ(5)
-#define IDE_IRQ                         IRQ_GPIO(21)
+#define IDE_IRQ                         PXA_GPIO_TO_IRQ(21)
 #define TOUCH_PANEL_IRQ_EDGE            IRQ_TYPE_EDGE_FALLING
-#define ETHERNET_IRQ                    IRQ_GPIO(4)
+#define ETHERNET_IRQ                    PXA_GPIO_TO_IRQ(4)
 #define ETHERNET_IRQ_EDGE               IRQ_TYPE_EDGE_RISING
 #define IDE_IRQ_EDGE                    IRQ_TYPE_EDGE_RISING
-#define PCMCIA_S0_CD_VALID              IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID              PXA_GPIO_TO_IRQ(7)
 #define PCMCIA_S0_CD_VALID_EDGE         IRQ_TYPE_EDGE_BOTH
-#define PCMCIA_S1_CD_VALID              IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID              PXA_GPIO_TO_IRQ(8)
 #define PCMCIA_S1_CD_VALID_EDGE         IRQ_TYPE_EDGE_BOTH
-#define PCMCIA_S0_RDYINT                IRQ_GPIO(19)
+#define PCMCIA_S0_RDYINT                PXA_GPIO_TO_IRQ(19)
-#define PCMCIA_S1_RDYINT                IRQ_GPIO(22)
+#define PCMCIA_S1_RDYINT                PXA_GPIO_TO_IRQ(22)
 /*
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7cc5a781e99e..1f996643b9de 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,7 +91,7 @@
 #define PXA_GPIO_IRQ_NUM        (192)
 #define GPIO_2_x_TO_IRQ(x)      (PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x)     (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+#define PXA_GPIO_TO_IRQ(x)      (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
 /*
 * The following interrupts are for board specific purposes. Since
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index ae536e86d8e8..2c4471336570 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -68,10 +68,10 @@
 /* 20, 53 and 86 are usb related too */
 /* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET      IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_GPIO_RESET      PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N     IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N     PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ      IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ      PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ         IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ         PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
 /** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 6baf7469d4ec..0bd4f036c72f 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -48,10 +48,10 @@
 #define GPIO_NR_PALMT5_BT_RESET                 83
 /* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N     IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_SD_DETECT_N     PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ      IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ      PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT      IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_USB_DETECT      PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET      IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+#define IRQ_GPIO_PALMT5_GPIO_RESET      PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
 /** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3f9dd3fd4638..c383a21680b6 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -52,8 +52,8 @@
 #define GPIO_NR_PALMTC_IR_DISABLE       45
 /* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N     IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_SD_DETECT_N     PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY      IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+#define IRQ_GPIO_PALMTC_WLAN_READY      PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
 /* UCB1400 GPIOs */
 #define GPIO_NR_PALMTC_POWER_DETECT     (0x80 | 0x00)
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 7074a6ed46c6..f2e530380253 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -62,10 +62,10 @@
 #define GPIO_NR_PALMTX_NAND_BUFFER_DIR          79
 /* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N     IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_SD_DETECT_N     PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ      IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ      PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT      IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_USB_DETECT      PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET      IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+#define IRQ_GPIO_PALMTX_GPIO_RESET      PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
 /** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4bac588478a8..6bf28de228bd 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -34,7 +34,7 @@
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO     0
-#define PCM027_RTC_IRQ          IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ          PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
 #define PCM027_RTC_IRQ_EDGE     IRQ_TYPE_EDGE_FALLING
 #define ADR_PCM027_RTC          0x51    /* I2C address */
@@ -43,21 +43,21 @@
 /* Ethernet chip (SMSC91C111) */
 #define PCM027_ETH_IRQ_GPIO     52
-#define PCM027_ETH_IRQ          IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ          PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
 #define PCM027_ETH_IRQ_EDGE     IRQ_TYPE_EDGE_RISING
 #define PCM027_ETH_PHYS         PXA_CS5_PHYS
 #define PCM027_ETH_SIZE         (1*1024*1024)
 /* CAN controller SJA1000 (unsupported yet) */
 #define PCM027_CAN_IRQ_GPIO     114
-#define PCM027_CAN_IRQ          IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ          PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
 #define PCM027_CAN_IRQ_EDGE     IRQ_TYPE_EDGE_FALLING
 #define PCM027_CAN_PHYS         0x22000000
 #define PCM027_CAN_SIZE         0x100
 /* SPI GPIO expander (unsupported yet) */
 #define PCM027_EGPIO_IRQ_GPIO   27
-#define PCM027_EGPIO_IRQ        IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ        PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
 #define PCM027_EGPIO_IRQ_EDGE   IRQ_TYPE_EDGE_FALLING
 #define PCM027_EGPIO_CS         24
 /*
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 8a4383b776d7..d72791695b26 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -28,14 +28,14 @@
 /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
 #define PCM990_CTRL_INT_IRQ_GPIO        9
-#define PCM990_CTRL_INT_IRQ             IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ             PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
 #define PCM990_CTRL_INT_IRQ_EDGE        IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS                PXA_CS1_PHYS    /* 16-Bit */
 #define PCM990_CTRL_BASE                0xea000000
 #define PCM990_CTRL_SIZE                (1*1024*1024)
 #define PCM990_CTRL_PWR_IRQ_GPIO        14
-#define PCM990_CTRL_PWR_IRQ             IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ             PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
 #define PCM990_CTRL_PWR_IRQ_EDGE        IRQ_TYPE_EDGE_RISING
 /* visible CPLD (U7) registers */
@@ -132,7 +132,7 @@
 * IDE
 */
 #define PCM990_IDE_IRQ_GPIO     13
-#define PCM990_IDE_IRQ          IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ          PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
 #define PCM990_IDE_IRQ_EDGE     IRQ_TYPE_EDGE_RISING
 #define PCM990_IDE_PLD_PHYS     0x20000000      /* 16 bit wide */
 #define PCM990_IDE_PLD_BASE     0xee000000
@@ -188,11 +188,11 @@
 * Compact Flash
 */
 #define PCM990_CF_IRQ_GPIO      11
-#define PCM990_CF_IRQ           IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ           PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
 #define PCM990_CF_IRQ_EDGE      IRQ_TYPE_EDGE_RISING
 #define PCM990_CF_CD_GPIO       12
-#define PCM990_CF_CD            IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD            PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
 #define PCM990_CF_CD_EDGE       IRQ_TYPE_EDGE_RISING
 #define PCM990_CF_PLD_PHYS      0x30000000      /* 16 bit wide */
@@ -258,14 +258,14 @@
 * Wolfson AC97 Touch
 */
 #define PCM990_AC97_IRQ_GPIO    10
-#define PCM990_AC97_IRQ         IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ         PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
 #define PCM990_AC97_IRQ_EDGE    IRQ_TYPE_EDGE_RISING
 /*
 * MMC phyCORE
 */
 #define PCM990_MMC0_IRQ_GPIO    9
-#define PCM990_MMC0_IRQ         IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ         PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
 #define PCM990_MMC0_IRQ_EDGE    IRQ_TYPE_EDGE_FALLING
 /*
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 83d1cfd00fc9..763fdc4f2b4b 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -47,18 +47,18 @@
 #define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
 /* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY          IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_ON_KEY          PXA_GPIO_TO_IRQ(0)
-#define POODLE_IRQ_GPIO_AC_IN           IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_AC_IN           PXA_GPIO_TO_IRQ(1)
-#define POODLE_IRQ_GPIO_HP_IN           IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_HP_IN           PXA_GPIO_TO_IRQ(4)
-#define POODLE_IRQ_GPIO_CO              IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_CO              PXA_GPIO_TO_IRQ(16)
-#define POODLE_IRQ_GPIO_TP_INT          IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_TP_INT          PXA_GPIO_TO_IRQ(5)
-#define POODLE_IRQ_GPIO_WAKEUP          IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_WAKEUP          PXA_GPIO_TO_IRQ(11)
-#define POODLE_IRQ_GPIO_GA_INT          IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_GA_INT          PXA_GPIO_TO_IRQ(10)
-#define POODLE_IRQ_GPIO_CF_IRQ          IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_IRQ          PXA_GPIO_TO_IRQ(17)
-#define POODLE_IRQ_GPIO_CF_CD           IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_CF_CD           PXA_GPIO_TO_IRQ(14)
-#define POODLE_IRQ_GPIO_nSD_INT         IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_INT         PXA_GPIO_TO_IRQ(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT      IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_nSD_DETECT      PXA_GPIO_TO_IRQ(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW    IRQ_GPIO(13)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW    PXA_GPIO_TO_IRQ(13)
 /* SCOOP GPIOs */
 #define POODLE_SCOOP_CHARGE_ON  SCOOP_GPCR_PA11
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 685749a51c42..273381a5c497 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -164,23 +164,23 @@
 /* Spitz IRQ Definitions */
-#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_KEY_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AC_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_AK_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_HP_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_TP_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_SYNC           PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_ON_KEY         PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWA            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_SWB            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_BAT_COVER      PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CO             PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_IRQ         PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF_CD          PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
 /*
 * Shared data structures
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1272c4b56ceb..4653539a2acc 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -141,30 +141,30 @@
 /*
 * Interrupts
 */
-#define TOSA_IRQ_GPIO_WAKEUP            IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_WAKEUP            PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN             IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_AC_IN             PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN        IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_RECORD_BTN        PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC              IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_SYNC              PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN            IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_USB_IN            PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT     IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_JACKET_DETECT     PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT           IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_INT           PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT        IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_nSD_DETECT        PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG          IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_BAT1_CRG          PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD             IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_CF_CD             PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG          IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_BAT0_CRG          PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT      IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_TC6393XB_INT      PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW          IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_BAT0_LOW          PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN            IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_EAR_IN            PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ            IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_CF_IRQ            PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY            IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_ON_KEY            PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE          IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_VGA_LINE          PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT            IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_TP_INT            PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ         IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ         PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED        IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT_LOCKED        PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW          IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_BAT1_LOW          PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)      IRQ_GPIO(69+(a))
+#define TOSA_IRQ_GPIO_KEY_SENSE(a)      PXA_GPIO_TO_IRQ(69+(a))
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW      IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW      PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
 #define TOSA_KEY_SYNC           KEY_102ND /* ??? */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 903e1a2e6641..d2ca01053f69 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -43,30 +43,30 @@
 /* Ethernet Controller Davicom DM9000 */
 #define GPIO_DM9000             101
-#define TRIZEPS4_ETH_IRQ        IRQ_GPIO(GPIO_DM9000)
+#define TRIZEPS4_ETH_IRQ        PXA_GPIO_TO_IRQ(GPIO_DM9000)
 /* UCB1400 audio / TS-controller */
 #define GPIO_UCB1400            1
-#define TRIZEPS4_UCB1400_IRQ    IRQ_GPIO(GPIO_UCB1400)
+#define TRIZEPS4_UCB1400_IRQ    PXA_GPIO_TO_IRQ(GPIO_UCB1400)
 /* PCMCIA socket Compact Flash */
 #define GPIO_PCD                11              /* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ         IRQ_GPIO(GPIO_PCD)
+#define TRIZEPS4_CD_IRQ         PXA_GPIO_TO_IRQ(GPIO_PCD)
 #define GPIO_PRDY               13              /* READY / nINT */
-#define TRIZEPS4_READY_NINT     IRQ_GPIO(GPIO_PRDY)
+#define TRIZEPS4_READY_NINT     PXA_GPIO_TO_IRQ(GPIO_PRDY)
 /* MMC socket */
 #define GPIO_MMC_DET            12
-#define TRIZEPS4_MMC_IRQ        IRQ_GPIO(GPIO_MMC_DET)
+#define TRIZEPS4_MMC_IRQ        PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
 /* DOC NAND chip */
 #define GPIO_DOC_LOCK           94
 #define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        IRQ_GPIO(GPIO_DOC_IRQ)
+#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
 /* SPI interface */
 #define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        IRQ_GPIO(GPIO_SPI)
+#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
 /* LEDS using tx2 / rx2 */
 #define GPIO_SYS_BUSY_LED       46
@@ -74,7 +74,7 @@
 /* Off-module PIC on ConXS board */
 #define GPIO_PIC                0
-#define TRIZEPS4_PIC_IRQ        IRQ_GPIO(GPIO_PIC)
+#define TRIZEPS4_PIC_IRQ        PXA_GPIO_TO_IRQ(GPIO_PIC)
 #ifdef CONFIG_MACH_TRIZEPS_CONXS
 /* for CONXS base board define these registers */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 0037e57e0cec..9cd235698771 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -124,8 +124,8 @@ static struct resource smc91x_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
-                .start  = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+                .start  = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-                .end    = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+                .end    = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
        }
 };
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd530279e0b..565dd2f2eaa2 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -152,8 +152,8 @@ static void __init lpd270_init_irq(void)
                                         handle_level_irq);
                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
        }
-        irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
+        irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
-        irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+        irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
 }
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6da9184..2fb2b50831d1 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -170,8 +170,8 @@ static void __init lubbock_init_irq(void)
                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
        }
-        irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
+        irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-        irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+        irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
 }
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d3965fda..ea62a990ae4b 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -178,8 +178,8 @@ static void __init mainstone_init_irq(void)
        MST_INTMSKENA = 0;
        MST_INTSETCLR = 0;
-        irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
+        irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-        irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+        irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
 }
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 50c833177866..1e6d796829ac 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -166,8 +166,8 @@ static struct resource locomo_resources[] = {
                .flags          = IORESOURCE_MEM,
        },
        [1] = {
-                .start          = IRQ_GPIO(10),
+                .start          = PXA_GPIO_TO_IRQ(10),
-                .end            = IRQ_GPIO(10),
+                .end            = PXA_GPIO_TO_IRQ(10),
                .flags          = IORESOURCE_IRQ,
        },
 };
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 785880f67b60..8d5168d253a9 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -907,24 +907,24 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
        gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
        /* Register interrupt handlers */
-        if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+        if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
-                dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+                dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
        }
-        if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+        if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
-                dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+                dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
        }
        if (sharpsl_pm.machinfo->gpio_fatal) {
-                if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+                if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
-                        dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+                        dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
                }
        }
        if (sharpsl_pm.machinfo->batfull_irq) {
                /* Register interrupt handler. */
-                if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+                if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
-                        dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+                        dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
                }
        }
@@ -953,14 +953,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
        led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-        free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+        free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
-        free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+        free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
        if (sharpsl_pm.machinfo->gpio_fatal)
-                free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+                free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
        if (sharpsl_pm.machinfo->batfull_irq)
-                free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+                free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
        gpio_free(sharpsl_pm.machinfo->gpio_batlock);
        gpio_free(sharpsl_pm.machinfo->gpio_batfull);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48bef569..bbf79d532d1e 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -376,7 +376,7 @@ static struct spi_board_info spi_board_info[] __initdata = {
                .bus_num = 1,
                .chip_select = 0,
                .controller_data = &staccel_chip_info,
-                .irq = IRQ_GPIO(96),
+                .irq = PXA_GPIO_TO_IRQ(96),
        }, {
                .modalias = "cc2420",
                .max_speed_hz = 6500000,
@@ -560,18 +560,18 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
                /* Through a nand gate - Also beware, on V2 sensor board the
                 * pull up resistors are missing.
                 */
-                .irq = IRQ_GPIO(99),
+                .irq = PXA_GPIO_TO_IRQ(99),
        }, { /* ITS400 Sensor board only */
                .type = "tsl2561",
                .addr = 0x49,
                /* Through a nand gate - Also beware, on V2 sensor board the
                 * pull up resistors are missing.
                 */
-                .irq = IRQ_GPIO(99),
+                .irq = PXA_GPIO_TO_IRQ(99),
        }, { /* ITS400 Sensor board only */
                .type = "tmp175",
                .addr = 0x4A,
-                .irq = IRQ_GPIO(96),
+                .irq = PXA_GPIO_TO_IRQ(96),
        }, { /* IMB400 Multimedia board */
                .type = "wm8940",
                .addr = 0x1A,
@@ -661,8 +661,8 @@ static struct resource smc91x_resources[] = {
                .flags = IORESOURCE_MEM,
        },
        [1] = {
-                .start = IRQ_GPIO(40),
+                .start = PXA_GPIO_TO_IRQ(40),
-                .end = IRQ_GPIO(40),
+                .end = PXA_GPIO_TO_IRQ(40),
                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        }
 };
@@ -707,7 +707,7 @@ static int stargate2_mci_init(struct device *dev,
        }
        gpio_direction_input(SG2_GPIO_nSD_DETECT);
-        err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+        err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
                          stargate2_detect_int,
                          IRQ_TYPE_EDGE_BOTH,
                          "MMC card detect",
@@ -738,7 +738,7 @@ static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
 static void stargate2_mci_exit(struct device *dev, void *data)
 {
-        free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+        free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
        gpio_free(SG2_SD_POWER_ENABLE);
        gpio_free(SG2_GPIO_nSD_DETECT);
 }
@@ -938,18 +938,18 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
                /* Through a nand gate - Also beware, on V2 sensor board the
                 * pull up resistors are missing.
                 */
-                .irq = IRQ_GPIO(99),
+                .irq = PXA_GPIO_TO_IRQ(99),
        }, { /* ITS400 Sensor board only */
                .type = "tsl2561",
                .addr = 0x49,
                /* Through a nand gate - Also beware, on V2 sensor board the
                 * pull up resistors are missing.
                 */
-                .irq = IRQ_GPIO(99),
+                .irq = PXA_GPIO_TO_IRQ(99),
        }, { /* ITS400 Sensor board only */
                .type = "tmp175",
                .addr = 0x4A,
-                .irq = IRQ_GPIO(96),
+                .irq = PXA_GPIO_TO_IRQ(96),
        },
 };
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6ed1ff..585e4f443e15 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -395,8 +395,8 @@ static struct resource vpac270_dm9000_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        [2] = {
-                .start  = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+                .start  = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-                .end    = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+                .end    = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
@@ -433,7 +433,7 @@ static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
 };
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-        .irq            = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+        .irq            = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
 };
 static struct platform_device vpac270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 93c64d8d7de9..86e59c043de2 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -231,12 +231,12 @@ static struct i2c_board_info zylonite_i2c_board_info[] = {
                .type           = "pca9539",
                .addr           = 0x74,
                .platform_data  = &gpio_exp[0],
-                .irq            = IRQ_GPIO(18),
+                .irq            = PXA_GPIO_TO_IRQ(18),
        }, {
                .type           = "pca9539",
                .addr           = 0x75,
                .platform_data  = &gpio_exp[1],
-                .irq            = IRQ_GPIO(19),
+                .irq            = PXA_GPIO_TO_IRQ(19),
        },
 };