72 files changed, 1002 insertions, 164 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 703a44fa0f9b..0e97f5cc5417 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -120,7 +120,7 @@ endif
  machine-$(CONFIG_ARCH_OMAP2)      := omap2
     plat-$(CONFIG_ARCH_OMAP)       := omap
  machine-$(CONFIG_ARCH_S3C2410)    := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
-    plat-$(CONFIG_PLAT_S3C24XX)    := s3c24xx
+    plat-$(CONFIG_PLAT_S3C24XX)    := s3c24xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)    := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)        := imx
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index c66021b5fa4d..cfa8da5f4e16 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -38,7 +38,7 @@
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
 
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/irq.h>
 
 #if 0
 #include <asm/debug-ll.h>
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 1322851d1acb..f0172d2c33bb 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -37,13 +37,13 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 int s3c2410_clkcon_enable(struct clk *clk, int enable)
 {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8730797749e3..99b6d68b754c 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -20,10 +20,10 @@
 #include <asm/dma.h>
 #include <mach/dma.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 #include <asm/plat-s3c24xx/dma.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 682df23087ab..4c29a89ad077 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
@@ -99,4 +99,4 @@
 
 /* include the reset of the code which will do the work */
 
-#include <asm/plat-s3c/debug-macro.S>
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index f5c5c53e1cc1..92150399563b 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -25,8 +25,8 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static int s3c2410_irq_add(struct sys_device *sysdev)
 {
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index f0de3c23ce78..c7936c15ec29 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -48,12 +48,12 @@
 #include <asm/mach-types.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 24c6334fac89..a01e3d3b0dff 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -39,7 +39,7 @@
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -56,8 +56,8 @@
 #include <linux/serial_8250.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index e35933a46d10..f9538d1965f3 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -30,7 +30,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
@@ -41,9 +41,9 @@
 #include <asm/plat-s3c24xx/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
         [0] = {
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 80fe2ed0775c..f9cc338a9c4c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -41,12 +41,12 @@
 #include <asm/mach/map.h>
 
 #include <asm/plat-s3c/iic.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 606ee15911b6..d49dbb0a4c8d 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -29,13 +29,13 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 7d34844debde..c3277258ecaf 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -49,7 +49,7 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/leds-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
@@ -57,9 +57,9 @@
 #include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc qt2410_iodesc[] __initdata = {
         { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index b88939d72282..6d940640a74f 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -46,10 +46,10 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index ec87306a8c24..773abd439981 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -44,9 +44,9 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index fbc0213d5485..41a2a0ee3557 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -40,13 +40,13 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ba43ff9e8164..b026cc8dcbae 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -34,8 +34,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/h1940.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 #ifdef CONFIG_S3C2410_PM_DEBUG
 extern void pm_dbg(const char *fmt, ...);
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 5d977f9c88ac..97173d360594 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -29,11 +29,11 @@
 #include <asm/irq.h>
 
 #include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
 #include <asm/plat-s3c24xx/clock.h>
 
 /* Initial IO mappings */
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index be37f221a177..dd5b6388a5a5 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -32,7 +32,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
         /* s3c2410_cpu_suspend
          *
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 4dacf8a1750d..a8a2c28722b9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -35,7 +35,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/devs.h>
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index af4b2ce516f9..8b3382d24799 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -37,13 +37,13 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
  * from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 22fc04a3b533..d4af572f22fd 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -22,9 +22,9 @@
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index ac62b79044f4..936fac7600e3 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -35,9 +35,9 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-power.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/irq.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/irq.h>
+#include <plat/pm.h>
 
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index ad980a1690c2..246c6dbcd87c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
@@ -49,9 +49,9 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 80affb1ee4cd..ae8dea1dbd83 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -40,11 +40,11 @@
 #include <asm/plat-s3c24xx/udc.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 7a08b3789915..4e84d404bf26 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -33,7 +33,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -42,11 +42,11 @@
 
 #include <asm/plat-s3c/nand.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 
 static struct map_desc vstms_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 737523a4e037..3e5575f66863 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -28,8 +28,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-dsc.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index d278010b9f60..4262de06f920 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -34,7 +34,7 @@
 #include <mach/idle.h>
 
 #include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
@@ -43,10 +43,10 @@
 #include <mach/regs-s3c2412.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 95567e6daea1..bb1101f6a896 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -42,7 +42,7 @@
 #include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 /* S3C2440 extended clock support */
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index cdd4e6e79ac0..b674f869e57c 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -21,9 +21,9 @@
 #include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index c0c67438d0a4..a0d49a982096 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -27,8 +27,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-dsc.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/cpu.h>
+#include <plat/s3c2440.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 276b823f4e27..a23cffbfcce8 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -34,9 +34,9 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 /* WDT/AC97 */
 
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 441f4bc09472..a37f8b220572 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -36,7 +36,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -50,8 +50,8 @@
 #include <net/ax88796.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f0f0cc6afcf4..5114b87d8cfd 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -31,7 +31,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -43,8 +43,8 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
         /* Nothing here */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 1a5e7027b41b..9d8259589856 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -36,13 +36,13 @@
 
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc nexcoder_iodesc[] __initdata = {
         /* nothing here yet */
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8b83f93b6102..5b1c32e64f0b 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -33,7 +33,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
@@ -45,8 +45,8 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 /* onboard perihperal map */
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e0b07e6a0a18..46128a170fed 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -38,7 +38,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -47,9 +47,9 @@
 #include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc rx3715_iodesc[] __initdata = {
         /* dump ISA space somewhere unused */
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 327c8f371984..e1799abec87d 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -31,18 +31,18 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d6b9a92d284e..52e527eebee4 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2440.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct sys_device s3c2440_sysdev = {
         .cls            = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 569b5c3d334a..075db289b7f3 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -42,7 +42,7 @@
 #include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 /* S3C2442 extended clock support */
 
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
index fbf8264249da..4663bdc7fff6 100644
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -19,8 +19,8 @@
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
 
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2442.h>
+#include <plat/cpu.h>
 
 static struct sys_device s3c2442_sysdev = {
         .cls            = &s3c2442_sysclass,
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 6a8d7cced4a2..ce56b51170f7 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -39,9 +39,9 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2443.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
  * from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index c1ff03aebfda..e75b6e3cfc34 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -22,9 +22,9 @@
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 9674de7223fd..0e00809c1e6e 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -34,9 +34,9 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index e3c0d587bd10..b1d5637d6dc1 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -31,18 +31,18 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 37793f924b5e..f1d1f8e158c2 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -32,9 +32,9 @@
 #include <mach/regs-s3c2443-clock.h>
 #include <mach/reset.h>
 
-#include <asm/plat-s3c24xx/s3c2443.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2443.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
         IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
new file mode 100644
index 000000000000..f03d7b35ba37
--- /dev/null
+++ b/arch/arm/plat-s3c/Makefile
@@ -0,0 +1,3 @@
+# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+
+obj-n   := dummy.o
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S
new file mode 100644
index 000000000000..4aa7e2e6c001
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/debug-macro.S
@@ -0,0 +1,75 @@
+/* linux/include/asm-arm/plat-s3c/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-serial.h>
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+        .macro fifo_level_s3c2440 rd, rx
+                ldr     \rd, [ \rx, # S3C2410_UFSTAT ]
+                and     \rd, \rd, #S3C2440_UFSTAT_TXMASK
+        .endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2410
+#endif
+
+        .macro  fifo_full_s3c2440 rd, rx
+                ldr     \rd, [ \rx, # S3C2410_UFSTAT ]
+                tst     \rd, #S3C2440_UFSTAT_TXFULL
+        .endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+        .macro  senduart,rd,rx
+                strb    \rd, [\rx, # S3C2410_UTXH ]
+        .endm
+
+        .macro  busyuart, rd, rx
+                ldr     \rd, [ \rx, # S3C2410_UFCON ]
+                tst     \rd, #S3C2410_UFCON_FIFOMODE    @ fifo enabled?
+                beq     1001f                           @
+                @ FIFO enabled...
+1003:
+                fifo_full \rd, \rx
+                bne     1003b
+                b       1002f
+
+1001:
+                @ busy waiting for non fifo
+                ldr     \rd, [ \rx, # S3C2410_UTRSTAT ]
+                tst     \rd, #S3C2410_UTRSTAT_TXFE
+                beq     1001b
+
+1002:           @ exit busyuart
+        .endm
+
+        .macro  waituart,rd,rx
+                ldr     \rd, [ \rx, # S3C2410_UFCON ]
+                tst     \rd, #S3C2410_UFCON_FIFOMODE    @ fifo enabled?
+                beq     1001f                           @
+                @ FIFO enabled...
+1003:
+                fifo_level \rd, \rx
+                teq     \rd, #0
+                bne     1003b
+                b       1002f
+1001:
+                @ idle waiting for non fifo
+                ldr     \rd, [ \rx, # S3C2410_UTRSTAT ]
+                tst     \rd, #S3C2410_UTRSTAT_TXFE
+                beq     1001b
+
+1002:           @ exit busyuart
+        .endm
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
new file mode 100644
index 000000000000..a0daa647b92c
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -0,0 +1,232 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+ *
+ *  From linux/include/asm-arm/hardware/serial_s3c2410.h
+ *
+ *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *
+ *  Adapted from:
+ *
+ *  Internal header file for MX1ADS serial ports (UART1 & 2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define S3C24XX_VA_UART0      (S3C_VA_UART)
+#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
+#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
+
+#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
+
+#define S3C2410_URXH      (0x24)
+#define S3C2410_UTXH      (0x20)
+#define S3C2410_ULCON     (0x00)
+#define S3C2410_UCON      (0x04)
+#define S3C2410_UFCON     (0x08)
+#define S3C2410_UMCON     (0x0C)
+#define S3C2410_UBRDIV    (0x28)
+#define S3C2410_UTRSTAT   (0x10)
+#define S3C2410_UERSTAT   (0x14)
+#define S3C2410_UFSTAT    (0x18)
+#define S3C2410_UMSTAT    (0x1C)
+
+#define S3C2410_LCON_CFGMASK      ((0xF<<3)|(0x3))
+
+#define S3C2410_LCON_CS5          (0x0)
+#define S3C2410_LCON_CS6          (0x1)
+#define S3C2410_LCON_CS7          (0x2)
+#define S3C2410_LCON_CS8          (0x3)
+#define S3C2410_LCON_CSMASK       (0x3)
+
+#define S3C2410_LCON_PNONE        (0x0)
+#define S3C2410_LCON_PEVEN        (0x5 << 3)
+#define S3C2410_LCON_PODD         (0x4 << 3)
+#define S3C2410_LCON_PMASK        (0x7 << 3)
+
+#define S3C2410_LCON_STOPB        (1<<2)
+#define S3C2410_LCON_IRM          (1<<6)
+
+#define S3C2440_UCON_CLKMASK      (3<<10)
+#define S3C2440_UCON_PCLK         (0<<10)
+#define S3C2440_UCON_UCLK         (1<<10)
+#define S3C2440_UCON_PCLK2        (2<<10)
+#define S3C2440_UCON_FCLK         (3<<10)
+#define S3C2443_UCON_EPLL         (3<<10)
+
+#define S3C2440_UCON2_FCLK_EN     (1<<15)
+#define S3C2440_UCON0_DIVMASK     (15 << 12)
+#define S3C2440_UCON1_DIVMASK     (15 << 12)
+#define S3C2440_UCON2_DIVMASK     (7 << 12)
+#define S3C2440_UCON_DIVSHIFT     (12)
+
+#define S3C2412_UCON_CLKMASK    (3<<10)
+#define S3C2412_UCON_UCLK       (1<<10)
+#define S3C2412_UCON_USYSCLK    (3<<10)
+#define S3C2412_UCON_PCLK       (0<<10)
+#define S3C2412_UCON_PCLK2      (2<<10)
+
+#define S3C2410_UCON_UCLK         (1<<10)
+#define S3C2410_UCON_SBREAK       (1<<4)
+
+#define S3C2410_UCON_TXILEVEL     (1<<9)
+#define S3C2410_UCON_RXILEVEL     (1<<8)
+#define S3C2410_UCON_TXIRQMODE    (1<<2)
+#define S3C2410_UCON_RXIRQMODE    (1<<0)
+#define S3C2410_UCON_RXFIFO_TOI   (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
+#define S3C2443_UCON_LOOPBACK     (1<<5)
+
+#define S3C2410_UCON_DEFAULT      (S3C2410_UCON_TXILEVEL  | \
+                                   S3C2410_UCON_RXILEVEL  | \
+                                   S3C2410_UCON_TXIRQMODE | \
+                                   S3C2410_UCON_RXIRQMODE | \
+                                   S3C2410_UCON_RXFIFO_TOI)
+
+#define S3C2410_UFCON_FIFOMODE    (1<<0)
+#define S3C2410_UFCON_TXTRIG0     (0<<6)
+#define S3C2410_UFCON_RXTRIG8     (1<<4)
+#define S3C2410_UFCON_RXTRIG12    (2<<4)
+
+/* S3C2440 FIFO trigger levels */
+#define S3C2440_UFCON_RXTRIG1     (0<<4)
+#define S3C2440_UFCON_RXTRIG8     (1<<4)
+#define S3C2440_UFCON_RXTRIG16    (2<<4)
+#define S3C2440_UFCON_RXTRIG32    (3<<4)
+
+#define S3C2440_UFCON_TXTRIG0     (0<<6)
+#define S3C2440_UFCON_TXTRIG16    (1<<6)
+#define S3C2440_UFCON_TXTRIG32    (2<<6)
+#define S3C2440_UFCON_TXTRIG48    (3<<6)
+
+#define S3C2410_UFCON_RESETBOTH   (3<<1)
+#define S3C2410_UFCON_RESETTX     (1<<2)
+#define S3C2410_UFCON_RESETRX     (1<<1)
+
+#define S3C2410_UFCON_DEFAULT     (S3C2410_UFCON_FIFOMODE | \
+                                   S3C2410_UFCON_TXTRIG0  | \
+                                   S3C2410_UFCON_RXTRIG8 )
+
+#define S3C2410_UMCOM_AFC         (1<<4)
+#define S3C2410_UMCOM_RTS_LOW     (1<<0)
+
+#define S3C2412_UMCON_AFC_63    (0<<5)          /* same as s3c2443 */
+#define S3C2412_UMCON_AFC_56    (1<<5)
+#define S3C2412_UMCON_AFC_48    (2<<5)
+#define S3C2412_UMCON_AFC_40    (3<<5)
+#define S3C2412_UMCON_AFC_32    (4<<5)
+#define S3C2412_UMCON_AFC_24    (5<<5)
+#define S3C2412_UMCON_AFC_16    (6<<5)
+#define S3C2412_UMCON_AFC_8     (7<<5)
+
+#define S3C2410_UFSTAT_TXFULL     (1<<9)
+#define S3C2410_UFSTAT_RXFULL     (1<<8)
+#define S3C2410_UFSTAT_TXMASK     (15<<4)
+#define S3C2410_UFSTAT_TXSHIFT    (4)
+#define S3C2410_UFSTAT_RXMASK     (15<<0)
+#define S3C2410_UFSTAT_RXSHIFT    (0)
+
+/* UFSTAT S3C2443 same as S3C2440 */
+#define S3C2440_UFSTAT_TXFULL     (1<<14)
+#define S3C2440_UFSTAT_RXFULL     (1<<6)
+#define S3C2440_UFSTAT_TXSHIFT    (8)
+#define S3C2440_UFSTAT_RXSHIFT    (0)
+#define S3C2440_UFSTAT_TXMASK     (63<<8)
+#define S3C2440_UFSTAT_RXMASK     (63)
+
+#define S3C2410_UTRSTAT_TXE       (1<<2)
+#define S3C2410_UTRSTAT_TXFE      (1<<1)
+#define S3C2410_UTRSTAT_RXDR      (1<<0)
+
+#define S3C2410_UERSTAT_OVERRUN   (1<<0)
+#define S3C2410_UERSTAT_FRAME     (1<<2)
+#define S3C2410_UERSTAT_BREAK     (1<<3)
+#define S3C2443_UERSTAT_PARITY    (1<<1)
+
+#define S3C2410_UERSTAT_ANY       (S3C2410_UERSTAT_OVERRUN | \
+                                   S3C2410_UERSTAT_FRAME | \
+                                   S3C2410_UERSTAT_BREAK)
+
+#define S3C2410_UMSTAT_CTS        (1<<0)
+#define S3C2410_UMSTAT_DeltaCTS   (1<<2)
+
+#define S3C2443_DIVSLOT           (0x2C)
+
+#ifndef __ASSEMBLY__
+
+/* struct s3c24xx_uart_clksrc
+ *
+ * this structure defines a named clock source that can be used for the
+ * uart, so that the best clock can be selected for the requested baud
+ * rate.
+ *
+ * min_baud and max_baud define the range of baud-rates this clock is
+ * acceptable for, if they are both zero, it is assumed any baud rate that
+ * can be generated from this clock will be used.
+ *
+ * divisor gives the divisor from the clock to the one seen by the uart
+*/
+
+struct s3c24xx_uart_clksrc {
+        const char      *name;
+        unsigned int     divisor;
+        unsigned int     min_baud;
+        unsigned int     max_baud;
+};
+
+/* configuration structure for per-machine configurations for the
+ * serial port
+ *
+ * the pointer is setup by the machine specific initialisation from the
+ * arch/arm/mach-s3c2410/ directory.
+*/
+
+struct s3c2410_uartcfg {
+        unsigned char      hwport;       /* hardware port number */
+        unsigned char      unused;
+        unsigned short     flags;
+        upf_t              uart_flags;   /* default uart flags */
+
+        unsigned long      ucon;         /* value of ucon for port */
+        unsigned long      ulcon;        /* value of ulcon for port */
+        unsigned long      ufcon;        /* value of ufcon for port */
+
+        struct s3c24xx_uart_clksrc *clocks;
+        unsigned int                clocks_size;
+};
+
+/* s3c24xx_uart_devs
+ *
+ * this is exported from the core as we cannot use driver_register(),
+ * or platform_add_device() before the console_initcall()
+*/
+
+extern struct platform_device *s3c24xx_uart_devs[3];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h
new file mode 100644
index 000000000000..cc0eedd53e38
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-timer.h
@@ -0,0 +1,115 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *                    http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Timer configuration
+*/
+
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
+#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
+
+#define S3C2410_TCFG0         S3C_TIMERREG(0x00)
+#define S3C2410_TCFG1         S3C_TIMERREG(0x04)
+#define S3C2410_TCON          S3C_TIMERREG(0x08)
+
+#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
+#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
+#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
+#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
+#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX4_DIV2   (0<<16)
+#define S3C2410_TCFG1_MUX4_DIV4   (1<<16)
+#define S3C2410_TCFG1_MUX4_DIV8   (2<<16)
+#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
+#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
+#define S3C2410_TCFG1_MUX4_MASK   (15<<16)
+#define S3C2410_TCFG1_MUX4_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX3_DIV2   (0<<12)
+#define S3C2410_TCFG1_MUX3_DIV4   (1<<12)
+#define S3C2410_TCFG1_MUX3_DIV8   (2<<12)
+#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
+#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
+#define S3C2410_TCFG1_MUX3_MASK   (15<<12)
+
+
+#define S3C2410_TCFG1_MUX2_DIV2   (0<<8)
+#define S3C2410_TCFG1_MUX2_DIV4   (1<<8)
+#define S3C2410_TCFG1_MUX2_DIV8   (2<<8)
+#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
+#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
+#define S3C2410_TCFG1_MUX2_MASK   (15<<8)
+
+
+#define S3C2410_TCFG1_MUX1_DIV2   (0<<4)
+#define S3C2410_TCFG1_MUX1_DIV4   (1<<4)
+#define S3C2410_TCFG1_MUX1_DIV8   (2<<4)
+#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
+#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
+#define S3C2410_TCFG1_MUX1_MASK   (15<<4)
+
+#define S3C2410_TCFG1_MUX0_DIV2   (0<<0)
+#define S3C2410_TCFG1_MUX0_DIV4   (1<<0)
+#define S3C2410_TCFG1_MUX0_DIV8   (2<<0)
+#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
+#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
+#define S3C2410_TCFG1_MUX0_MASK   (15<<0)
+
+#define S3C2410_TCFG1_MUX_DIV2    (0<<0)
+#define S3C2410_TCFG1_MUX_DIV4    (1<<0)
+#define S3C2410_TCFG1_MUX_DIV8    (2<<0)
+#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
+#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
+#define S3C2410_TCFG1_MUX_MASK    (15<<0)
+
+#define S3C2410_TCFG1_SHIFT(x)    ((x) * 4)
+
+/* for each timer, we have an count buffer, an compare buffer and
+ * an observation buffer
+*/
+
+/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
+
+#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
+#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
+#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
+
+#define S3C2410_TCON_T4RELOAD     (1<<22)
+#define S3C2410_TCON_T4MANUALUPD  (1<<21)
+#define S3C2410_TCON_T4START      (1<<20)
+
+#define S3C2410_TCON_T3RELOAD     (1<<19)
+#define S3C2410_TCON_T3INVERT     (1<<18)
+#define S3C2410_TCON_T3MANUALUPD  (1<<17)
+#define S3C2410_TCON_T3START      (1<<16)
+
+#define S3C2410_TCON_T2RELOAD     (1<<15)
+#define S3C2410_TCON_T2INVERT     (1<<14)
+#define S3C2410_TCON_T2MANUALUPD  (1<<13)
+#define S3C2410_TCON_T2START      (1<<12)
+
+#define S3C2410_TCON_T1RELOAD     (1<<11)
+#define S3C2410_TCON_T1INVERT     (1<<10)
+#define S3C2410_TCON_T1MANUALUPD  (1<<9)
+#define S3C2410_TCON_T1START      (1<<8)
+
+#define S3C2410_TCON_T0DEADZONE   (1<<4)
+#define S3C2410_TCON_T0RELOAD     (1<<3)
+#define S3C2410_TCON_T0INVERT     (1<<2)
+#define S3C2410_TCON_T0MANUALUPD  (1<<1)
+#define S3C2410_TCON_T0START      (1<<0)
+
+#endif /*  __ASM_ARCH_REGS_TIMER_H */
+
+
+
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 54d4b8e2263c..80fb82f2616d 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -48,7 +48,7 @@
 #include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 /* clock information */
 
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1863a1b1bc49..32490fa97b40 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -41,8 +41,8 @@
 #include <asm/plat-s3c/nand.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
 
 /* LED devices */
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 89ce60eabd5b..abddadd69119 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -42,18 +42,18 @@
 #include <mach/system-reset.h>
 
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/s3c2400.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2400.h>
+#include <plat/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include "s3c244x.h"
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2440.h>
+#include <plat/s3c2442.h>
+#include <plat/s3c2443.h>
 
 struct cpu_table {
         unsigned long   idcode;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index d6fb76578b11..8cf4b1b32b05 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -28,11 +28,11 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <asm/plat-s3c24xx/udc.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
 /* Serial port registrations */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c24xx/include/plat/cpu.h
new file mode 100644
index 000000000000..23e420e8bd5b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu.h
@@ -0,0 +1,54 @@
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_irq(void);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+                                  struct s3c24xx_uart_resources *res,
+                                  struct s3c2410_uartcfg *cfg, int no);
+
+/* timer for 2410/2440 */
+
+struct sys_timer;
+extern struct sys_timer s3c24xx_timer;
+
+/* system device classes */
+
+extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c24xx/include/plat/devs.h
new file mode 100644
index 000000000000..badaac9d64a8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/devs.h
@@ -0,0 +1,49 @@
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+        struct resource         *resources;
+        unsigned long            nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c_device_timer[];
+
+extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hsmmc;
+
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+
+extern struct platform_device s3c_device_nand;
+
+extern struct platform_device s3c_device_usbgadget;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
new file mode 100644
index 000000000000..45746a995343
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -0,0 +1,109 @@
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+/* these are exported for arch/arm/mach-* usage */
+extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+                int subcheck)
+{
+        unsigned long mask;
+        unsigned long submask;
+
+        submask = __raw_readl(S3C2410_INTSUBMSK);
+        mask = __raw_readl(S3C2410_INTMSK);
+
+        submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+        /* check to see if we need to mask the parent IRQ */
+
+        if ((submask  & subcheck) == subcheck) {
+                __raw_writel(mask | parentbit, S3C2410_INTMSK);
+        }
+
+        /* write back masks */
+        __raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+        unsigned long mask;
+        unsigned long submask;
+
+        submask = __raw_readl(S3C2410_INTSUBMSK);
+        mask = __raw_readl(S3C2410_INTMSK);
+
+        submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+        mask &= ~parentbit;
+
+        /* write back masks */
+        __raw_writel(submask, S3C2410_INTSUBMSK);
+        __raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+        unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+        s3c_irqsub_mask(irqno, parentmask, group);
+
+        __raw_writel(bit, S3C2410_SUBSRCPND);
+
+        /* only ack parent if we've got all the irqs (seems we must
+         * ack, all and hope that the irq system retriggers ok when
+         * the interrupt goes off again)
+         */
+
+        if (1) {
+                __raw_writel(parentmask, S3C2410_SRCPND);
+                __raw_writel(parentmask, S3C2410_INTPND);
+        }
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+        unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+        __raw_writel(bit, S3C2410_SUBSRCPND);
+
+        /* only ack parent if we've got all the irqs (seems we must
+         * ack, all and hope that the irq system retriggers ok when
+         * the interrupt goes off again)
+         */
+
+        if (1) {
+                __raw_writel(parentmask, S3C2410_SRCPND);
+                __raw_writel(parentmask, S3C2410_INTPND);
+        }
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h
new file mode 100644
index 000000000000..cc623667e48a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pm.h
@@ -0,0 +1,73 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c2410_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c2410_pm_init(void);
+
+#else
+
+static inline int s3c2410_pm_init(void)
+{
+        return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
+extern void s3c2410_cpu_resume(void);
+
+extern unsigned long s3c2410_sleep_save_phys;
+
+/* sleep save info */
+
+struct sleep_save {
+        void __iomem    *reg;
+        unsigned long   val;
+};
+
+#define SAVE_ITEM(x) \
+        { .reg = (x) }
+
+extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
new file mode 100644
index 000000000000..3a5a16821af8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
new file mode 100644
index 000000000000..3cd1ec677b3f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern  int s3c2410_init(void);
+
+extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#endif
+
+extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
new file mode 100644
index 000000000000..107853bf9481
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
new file mode 100644
index 000000000000..451a23a2092a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
new file mode 100644
index 000000000000..11d83b5c84e6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern  int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 36cefe176835..25d532490b44 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -65,9 +65,9 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 /* wakeup irq control */
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index e6705014b2a0..ef6029710415 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -33,7 +33,7 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
 
 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index fc4b731a949c..d937ff1a9ac5 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -40,7 +40,7 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -48,7 +48,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
 
 /* for external use */
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 306cc9c6f9ef..245270b7d5b7 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -25,9 +25,9 @@
 #include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 7a92c938542a..feb770f2e84e 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,8 +19,8 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
 
 struct pwm_device {
         struct list_head         list;
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 8a5fffde6631..2a8d7ca428b5 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -42,7 +42,7 @@
 #include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
 {
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index f3dc38cf1de4..3520a093ef88 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -34,9 +34,9 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
 
 /* camera irq */
 
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 281b4804ed38..793e0cae2c77 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -30,18 +30,18 @@
 #include <asm/irq.h>
 
 #include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
 #include <mach/regs-dsc.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
 #include "s3c244x.h"
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
         IODESC_ENT(CLKPWR),
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 4981a08b6ebb..76594b212802 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -32,7 +32,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
  * reset the UART configuration, only enable if you really need this!
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index b471a21ae2e4..71c65c93dab0 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -33,12 +33,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/map.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
 #include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;