51 files changed, 6284 insertions, 2229 deletions

diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
new file mode 100644
index 000000000000..0fa010a63a8e
--- /dev/null
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -0,0 +1,1378 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Jul  3 12:08:41 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+CONFIG_PPC_CHRP=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_KEXEC is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+# CONFIG_TULIP is not set
+CONFIG_DE4X5=y
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_MV643XX_ETH_0 is not set
+# CONFIG_MV643XX_ETH_1 is not set
+# CONFIG_MV643XX_ETH_2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_RTAS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+# CONFIG_FB_MATROX_I2C is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig
new file mode 100644
index 000000000000..fc2d9789adc8
--- /dev/null
+++ b/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -0,0 +1,1336 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Fri Jun 30 17:53:25 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC834x_SYS is not set
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC834x=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x1000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+# CONFIG_BLK_DEV_IDE is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+CONFIG_SCSI_SATA_SIL=y
+# CONFIG_SCSI_SATA_SIL24 is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+CONFIG_SERIAL_TEXT_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index a6920919d68e..f4e5e14ee2b6 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -111,7 +111,7 @@ void __init btext_setup_display(int width, int height, int depth, int pitch,
         logicalDisplayBase = (unsigned char *)address;
         dispDeviceBase = (unsigned char *)address;
         dispDeviceRowBytes = pitch;
-        dispDeviceDepth = depth;
+        dispDeviceDepth = depth == 15 ? 16 : depth;
         dispDeviceRect[0] = dispDeviceRect[1] = 0;
         dispDeviceRect[2] = width;
         dispDeviceRect[3] = height;
@@ -160,20 +160,28 @@ int btext_initialize(struct device_node *np)
         unsigned long address = 0;
         u32 *prop;
 
-        prop = (u32 *)get_property(np, "width", NULL);
+        prop = (u32 *)get_property(np, "linux,bootx-width", NULL);
+        if (prop == NULL)
+                prop = (u32 *)get_property(np, "width", NULL);
         if (prop == NULL)
                 return -EINVAL;
         width = *prop;
-        prop = (u32 *)get_property(np, "height", NULL);
+        prop = (u32 *)get_property(np, "linux,bootx-height", NULL);
+        if (prop == NULL)
+                prop = (u32 *)get_property(np, "height", NULL);
         if (prop == NULL)
                 return -EINVAL;
         height = *prop;
-        prop = (u32 *)get_property(np, "depth", NULL);
+        prop = (u32 *)get_property(np, "linux,bootx-depth", NULL);
+        if (prop == NULL)
+                prop = (u32 *)get_property(np, "depth", NULL);
         if (prop == NULL)
                 return -EINVAL;
         depth = *prop;
         pitch = width * ((depth + 7) / 8);
-        prop = (u32 *)get_property(np, "linebytes", NULL);
+        prop = (u32 *)get_property(np, "linux,bootx-linebytes", NULL);
+        if (prop == NULL)
+                prop = (u32 *)get_property(np, "linebytes", NULL);
         if (prop)
                 pitch = *prop;
         if (pitch == 1)
@@ -194,7 +202,7 @@ int btext_initialize(struct device_node *np)
         g_max_loc_Y = height / 16;
         dispDeviceBase = (unsigned char *)address;
         dispDeviceRowBytes = pitch;
-        dispDeviceDepth = depth;
+        dispDeviceDepth = depth == 15 ? 16 : depth;
         dispDeviceRect[0] = dispDeviceRect[1] = 0;
         dispDeviceRect[2] = width;
         dispDeviceRect[3] = height;
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index e47d40ac6f39..97ddc02a3d42 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -323,13 +323,11 @@ int ibmebus_request_irq(struct ibmebus_dev *dev,
                         unsigned long irq_flags, const char * devname,
                         void *dev_id)
 {
-        unsigned int irq = virt_irq_create_mapping(ist);
+        unsigned int irq = irq_create_mapping(NULL, ist, 0);
         
         if (irq == NO_IRQ)
                 return -EINVAL;
         
-        irq = irq_offset_up(irq);
-        
         return request_irq(irq, handler,
                            irq_flags, devname, dev_id);
 }
@@ -337,12 +335,9 @@ EXPORT_SYMBOL(ibmebus_request_irq);
 
 void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id)
 {
-        unsigned int irq = virt_irq_create_mapping(ist);
+        unsigned int irq = irq_find_mapping(NULL, ist);
         
-        irq = irq_offset_up(irq);
         free_irq(irq, dev_id);
-        
-        return;
 }
 EXPORT_SYMBOL(ibmebus_free_irq);
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index e3774f6b57cc..8cf987809c66 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -29,6 +29,8 @@
  * to reduce code space and undefined function references.
  */
 
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/threads.h>
 #include <linux/kernel_stat.h>
@@ -46,7 +48,10 @@
 #include <linux/cpumask.h>
 #include <linux/profile.h>
 #include <linux/bitops.h>
-#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/mutex.h>
+#include <linux/bootmem.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -57,39 +62,38 @@
 #include <asm/prom.h>
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
+#include <asm/udbg.h>
 #ifdef CONFIG_PPC_ISERIES
 #include <asm/paca.h>
 #endif
 
 int __irq_offset_value;
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(__irq_offset_value);
-#endif
-
 static int ppc_spurious_interrupts;
 
 #ifdef CONFIG_PPC32
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
+EXPORT_SYMBOL(__irq_offset_value);
+atomic_t ppc_n_lost_interrupts;
 
+#ifndef CONFIG_PPC_MERGE
+#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
 unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-atomic_t ppc_n_lost_interrupts;
+#endif
 
 #ifdef CONFIG_TAU_INT
 extern int tau_initialized;
 extern int tau_interrupts(int);
 #endif
+#endif /* CONFIG_PPC32 */
 
 #if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
 extern atomic_t ipi_recv;
 extern atomic_t ipi_sent;
 #endif
-#endif /* CONFIG_PPC32 */
 
 #ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
 int distribute_irqs = 1;
-u64 ppc64_interrupt_controller;
 #endif /* CONFIG_PPC64 */
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -182,7 +186,7 @@ void fixup_irqs(cpumask_t map)
 
 void do_IRQ(struct pt_regs *regs)
 {
-        int irq;
+        unsigned int irq;
 #ifdef CONFIG_IRQSTACKS
         struct thread_info *curtp, *irqtp;
 #endif
@@ -213,22 +217,26 @@ void do_IRQ(struct pt_regs *regs)
          */
         irq = ppc_md.get_irq(regs);
 
-        if (irq >= 0) {
+        if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
 #ifdef CONFIG_IRQSTACKS
                 /* Switch to the irq stack to handle this */
                 curtp = current_thread_info();
                 irqtp = hardirq_ctx[smp_processor_id()];
                 if (curtp != irqtp) {
+                        struct irq_desc *desc = irq_desc + irq;
+                        void *handler = desc->handle_irq;
+                        if (handler == NULL)
+                                handler = &__do_IRQ;
                         irqtp->task = curtp->task;
                         irqtp->flags = 0;
-                        call___do_IRQ(irq, regs, irqtp);
+                        call_handle_irq(irq, desc, regs, irqtp, handler);
                         irqtp->task = NULL;
                         if (irqtp->flags)
                                 set_bits(irqtp->flags, &curtp->flags);
                 } else
 #endif
-                        __do_IRQ(irq, regs);
-        } else if (irq != -2)
+                        generic_handle_irq(irq, regs);
+        } else if (irq != NO_IRQ_IGNORE)
                 /* That's not SMP safe ... but who cares ? */
                 ppc_spurious_interrupts++;
 
@@ -245,191 +253,562 @@ void do_IRQ(struct pt_regs *regs)
 
 void __init init_IRQ(void)
 {
+        ppc_md.init_IRQ();
 #ifdef CONFIG_PPC64
-        static int once = 0;
+        irq_ctx_init();
+#endif
+}
+
+
+#ifdef CONFIG_IRQSTACKS
+struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
+
+void irq_ctx_init(void)
+{
+        struct thread_info *tp;
+        int i;
+
+        for_each_possible_cpu(i) {
+                memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
+                tp = softirq_ctx[i];
+                tp->cpu = i;
+                tp->preempt_count = SOFTIRQ_OFFSET;
+
+                memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
+                tp = hardirq_ctx[i];
+                tp->cpu = i;
+                tp->preempt_count = HARDIRQ_OFFSET;
+        }
+}
+
+static inline void do_softirq_onstack(void)
+{
+        struct thread_info *curtp, *irqtp;
+
+        curtp = current_thread_info();
+        irqtp = softirq_ctx[smp_processor_id()];
+        irqtp->task = curtp->task;
+        call_do_softirq(irqtp);
+        irqtp->task = NULL;
+}
 
-        if (once)
+#else
+#define do_softirq_onstack()    __do_softirq()
+#endif /* CONFIG_IRQSTACKS */
+
+void do_softirq(void)
+{
+        unsigned long flags;
+
+        if (in_interrupt())
                 return;
 
-        once++;
+        local_irq_save(flags);
 
-#endif
-        ppc_md.init_IRQ();
-#ifdef CONFIG_PPC64
-        irq_ctx_init();
-#endif
+        if (local_softirq_pending())
+                do_softirq_onstack();
+
+        local_irq_restore(flags);
 }
+EXPORT_SYMBOL(do_softirq);
+
 
-#ifdef CONFIG_PPC64
 /*
- * Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
+ * IRQ controller and virtual interrupts
  */
 
-#define UNDEFINED_IRQ 0xffffffff
-unsigned int virt_irq_to_real_map[NR_IRQS];
+#ifdef CONFIG_PPC_MERGE
 
-/*
- * Don't use virtual irqs 0, 1, 2 for devices.
- * The pcnet32 driver considers interrupt numbers < 2 to be invalid,
- * and 2 is the XICS IPI interrupt.
- * We limit virtual irqs to __irq_offet_value less than virt_irq_max so
- * that when we offset them we don't end up with an interrupt
- * number >= virt_irq_max.
- */
-#define MIN_VIRT_IRQ    3
+static LIST_HEAD(irq_hosts);
+static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED;
 
-unsigned int virt_irq_max;
-static unsigned int max_virt_irq;
-static unsigned int nr_virt_irqs;
+struct irq_map_entry irq_map[NR_IRQS];
+static unsigned int irq_virq_count = NR_IRQS;
+static struct irq_host *irq_default_host;
 
-void
-virt_irq_init(void)
+struct irq_host *irq_alloc_host(unsigned int revmap_type,
+                                unsigned int revmap_arg,
+                                struct irq_host_ops *ops,
+                                irq_hw_number_t inval_irq)
 {
-        int i;
+        struct irq_host *host;
+        unsigned int size = sizeof(struct irq_host);
+        unsigned int i;
+        unsigned int *rmap;
+        unsigned long flags;
+
+        /* Allocate structure and revmap table if using linear mapping */
+        if (revmap_type == IRQ_HOST_MAP_LINEAR)
+                size += revmap_arg * sizeof(unsigned int);
+        if (mem_init_done)
+                host = kzalloc(size, GFP_KERNEL);
+        else {
+                host = alloc_bootmem(size);
+                if (host)
+                        memset(host, 0, size);
+        }
+        if (host == NULL)
+                return NULL;
 
-        if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1)))
-                virt_irq_max = NR_IRQS - 1;
-        max_virt_irq = virt_irq_max - __irq_offset_value;
-        nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1;
+        /* Fill structure */
+        host->revmap_type = revmap_type;
+        host->inval_irq = inval_irq;
+        host->ops = ops;
 
-        for (i = 0; i < NR_IRQS; i++)
-                virt_irq_to_real_map[i] = UNDEFINED_IRQ;
+        spin_lock_irqsave(&irq_big_lock, flags);
+
+        /* If it's a legacy controller, check for duplicates and
+         * mark it as allocated (we use irq 0 host pointer for that
+         */
+        if (revmap_type == IRQ_HOST_MAP_LEGACY) {
+                if (irq_map[0].host != NULL) {
+                        spin_unlock_irqrestore(&irq_big_lock, flags);
+                        /* If we are early boot, we can't free the structure,
+                         * too bad...
+                         * this will be fixed once slab is made available early
+                         * instead of the current cruft
+                         */
+                        if (mem_init_done)
+                                kfree(host);
+                        return NULL;
+                }
+                irq_map[0].host = host;
+        }
+
+        list_add(&host->link, &irq_hosts);
+        spin_unlock_irqrestore(&irq_big_lock, flags);
+
+        /* Additional setups per revmap type */
+        switch(revmap_type) {
+        case IRQ_HOST_MAP_LEGACY:
+                /* 0 is always the invalid number for legacy */
+                host->inval_irq = 0;
+                /* setup us as the host for all legacy interrupts */
+                for (i = 1; i < NUM_ISA_INTERRUPTS; i++) {
+                        irq_map[i].hwirq = 0;
+                        smp_wmb();
+                        irq_map[i].host = host;
+                        smp_wmb();
+
+                        /* Clear some flags */
+                        get_irq_desc(i)->status
+                                &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+
+                        /* Legacy flags are left to default at this point,
+                         * one can then use irq_create_mapping() to
+                         * explicitely change them
+                         */
+                        ops->map(host, i, i, 0);
+                }
+                break;
+        case IRQ_HOST_MAP_LINEAR:
+                rmap = (unsigned int *)(host + 1);
+                for (i = 0; i < revmap_arg; i++)
+                        rmap[i] = IRQ_NONE;
+                host->revmap_data.linear.size = revmap_arg;
+                smp_wmb();
+                host->revmap_data.linear.revmap = rmap;
+                break;
+        default:
+                break;
+        }
+
+        pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
+
+        return host;
 }
 
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
- */
-int virt_irq_create_mapping(unsigned int real_irq)
+struct irq_host *irq_find_host(struct device_node *node)
 {
-        unsigned int virq, first_virq;
-        static int warned;
+        struct irq_host *h, *found = NULL;
+        unsigned long flags;
+
+        /* We might want to match the legacy controller last since
+         * it might potentially be set to match all interrupts in
+         * the absence of a device node. This isn't a problem so far
+         * yet though...
+         */
+        spin_lock_irqsave(&irq_big_lock, flags);
+        list_for_each_entry(h, &irq_hosts, link)
+                if (h->ops->match == NULL || h->ops->match(h, node)) {
+                        found = h;
+                        break;
+                }
+        spin_unlock_irqrestore(&irq_big_lock, flags);
+        return found;
+}
+EXPORT_SYMBOL_GPL(irq_find_host);
+
+void irq_set_default_host(struct irq_host *host)
+{
+        pr_debug("irq: Default host set to @0x%p\n", host);
 
-        if (ppc64_interrupt_controller == IC_OPEN_PIC)
-                return real_irq;        /* no mapping for openpic (for now) */
+        irq_default_host = host;
+}
 
-        if (ppc64_interrupt_controller == IC_CELL_PIC)
-                return real_irq;        /* no mapping for iic either */
+void irq_set_virq_count(unsigned int count)
+{
+        pr_debug("irq: Trying to set virq count to %d\n", count);
 
-        /* don't map interrupts < MIN_VIRT_IRQ */
-        if (real_irq < MIN_VIRT_IRQ) {
-                virt_irq_to_real_map[real_irq] = real_irq;
-                return real_irq;
+        BUG_ON(count < NUM_ISA_INTERRUPTS);
+        if (count < NR_IRQS)
+                irq_virq_count = count;
+}
+
+unsigned int irq_create_mapping(struct irq_host *host,
+                                irq_hw_number_t hwirq,
+                                unsigned int flags)
+{
+        unsigned int virq, hint;
+
+        pr_debug("irq: irq_create_mapping(0x%p, 0x%lx, 0x%x)\n",
+                 host, hwirq, flags);
+
+        /* Look for default host if nececssary */
+        if (host == NULL)
+                host = irq_default_host;
+        if (host == NULL) {
+                printk(KERN_WARNING "irq_create_mapping called for"
+                       " NULL host, hwirq=%lx\n", hwirq);
+                WARN_ON(1);
+                return NO_IRQ;
         }
+        pr_debug("irq: -> using host @%p\n", host);
 
-        /* map to a number between MIN_VIRT_IRQ and max_virt_irq */
-        virq = real_irq;
-        if (virq > max_virt_irq)
-                virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
-
-        /* search for this number or a free slot */
-        first_virq = virq;
-        while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
-                if (virt_irq_to_real_map[virq] == real_irq)
-                        return virq;
-                if (++virq > max_virt_irq)
-                        virq = MIN_VIRT_IRQ;
-                if (virq == first_virq)
-                        goto nospace;   /* oops, no free slots */
+        /* Check if mapping already exist, if it does, call
+         * host->ops->map() to update the flags
+         */
+        virq = irq_find_mapping(host, hwirq);
+        if (virq != IRQ_NONE) {
+                pr_debug("irq: -> existing mapping on virq %d\n", virq);
+                host->ops->map(host, virq, hwirq, flags);
+                return virq;
         }
 
-        virt_irq_to_real_map[virq] = real_irq;
+        /* Get a virtual interrupt number */
+        if (host->revmap_type == IRQ_HOST_MAP_LEGACY) {
+                /* Handle legacy */
+                virq = (unsigned int)hwirq;
+                if (virq == 0 || virq >= NUM_ISA_INTERRUPTS)
+                        return NO_IRQ;
+                return virq;
+        } else {
+                /* Allocate a virtual interrupt number */
+                hint = hwirq % irq_virq_count;
+                virq = irq_alloc_virt(host, 1, hint);
+                if (virq == NO_IRQ) {
+                        pr_debug("irq: -> virq allocation failed\n");
+                        return NO_IRQ;
+                }
+        }
+        pr_debug("irq: -> obtained virq %d\n", virq);
+
+        /* Clear some flags */
+        get_irq_desc(virq)->status &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+
+        /* map it */
+        if (host->ops->map(host, virq, hwirq, flags)) {
+                pr_debug("irq: -> mapping failed, freeing\n");
+                irq_free_virt(virq, 1);
+                return NO_IRQ;
+        }
+        smp_wmb();
+        irq_map[virq].hwirq = hwirq;
+        smp_mb();
         return virq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+                                          u32 *intspec, unsigned int intsize)
+{
+        struct irq_host *host;
+        irq_hw_number_t hwirq;
+        unsigned int flags = IRQ_TYPE_NONE;
 
- nospace:
-        if (!warned) {
-                printk(KERN_CRIT "Interrupt table is full\n");
-                printk(KERN_CRIT "Increase virt_irq_max (currently %d) "
-                       "in your kernel sources and rebuild.\n", virt_irq_max);
-                warned = 1;
+        if (controller == NULL)
+                host = irq_default_host;
+        else
+                host = irq_find_host(controller);
+        if (host == NULL)
+                return NO_IRQ;
+
+        /* If host has no translation, then we assume interrupt line */
+        if (host->ops->xlate == NULL)
+                hwirq = intspec[0];
+        else {
+                if (host->ops->xlate(host, controller, intspec, intsize,
+                                     &hwirq, &flags))
+                        return NO_IRQ;
         }
-        return NO_IRQ;
+
+        return irq_create_mapping(host, hwirq, flags);
 }
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
 
-/*
- * In most cases will get a hit on the very first slot checked in the
- * virt_irq_to_real_map.  Only when there are a large number of
- * IRQs will this be expensive.
- */
-unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 {
-        unsigned int virq;
-        unsigned int first_virq;
+        struct of_irq oirq;
 
-        virq = real_irq;
+        if (of_irq_map_one(dev, index, &oirq))
+                return NO_IRQ;
 
-        if (virq > max_virt_irq)
-                virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
+        return irq_create_of_mapping(oirq.controller, oirq.specifier,
+                                     oirq.size);
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
-        first_virq = virq;
+void irq_dispose_mapping(unsigned int virq)
+{
+        struct irq_host *host = irq_map[virq].host;
+        irq_hw_number_t hwirq;
+        unsigned long flags;
 
-        do {
-                if (virt_irq_to_real_map[virq] == real_irq)
-                        return virq;
+        WARN_ON (host == NULL);
+        if (host == NULL)
+                return;
 
-                virq++;
+        /* Never unmap legacy interrupts */
+        if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
+                return;
 
-                if (virq >= max_virt_irq)
-                        virq = 0;
+        /* remove chip and handler */
+        set_irq_chip_and_handler(virq, NULL, NULL);
+
+        /* Make sure it's completed */
+        synchronize_irq(virq);
+
+        /* Tell the PIC about it */
+        if (host->ops->unmap)
+                host->ops->unmap(host, virq);
+        smp_mb();
+
+        /* Clear reverse map */
+        hwirq = irq_map[virq].hwirq;
+        switch(host->revmap_type) {
+        case IRQ_HOST_MAP_LINEAR:
+                if (hwirq < host->revmap_data.linear.size)
+                        host->revmap_data.linear.revmap[hwirq] = IRQ_NONE;
+                break;
+        case IRQ_HOST_MAP_TREE:
+                /* Check if radix tree allocated yet */
+                if (host->revmap_data.tree.gfp_mask == 0)
+                        break;
+                /* XXX radix tree not safe ! remove lock whem it becomes safe
+                 * and use some RCU sync to make sure everything is ok before we
+                 * can re-use that map entry
+                 */
+                spin_lock_irqsave(&irq_big_lock, flags);
+                radix_tree_delete(&host->revmap_data.tree, hwirq);
+                spin_unlock_irqrestore(&irq_big_lock, flags);
+                break;
+        }
 
-        } while (first_virq != virq);
+        /* Destroy map */
+        smp_mb();
+        irq_map[virq].hwirq = host->inval_irq;
 
-        return NO_IRQ;
+        /* Set some flags */
+        get_irq_desc(virq)->status |= IRQ_NOREQUEST;
 
+        /* Free it */
+        irq_free_virt(virq, 1);
 }
-#endif /* CONFIG_PPC64 */
+EXPORT_SYMBOL_GPL(irq_dispose_mapping);
 
-#ifdef CONFIG_IRQSTACKS
-struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
-struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
+unsigned int irq_find_mapping(struct irq_host *host,
+                              irq_hw_number_t hwirq)
+{
+        unsigned int i;
+        unsigned int hint = hwirq % irq_virq_count;
+
+        /* Look for default host if nececssary */
+        if (host == NULL)
+                host = irq_default_host;
+        if (host == NULL)
+                return NO_IRQ;
+
+        /* legacy -> bail early */
+        if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
+                return hwirq;
+
+        /* Slow path does a linear search of the map */
+        if (hint < NUM_ISA_INTERRUPTS)
+                hint = NUM_ISA_INTERRUPTS;
+        i = hint;
+        do  {
+                if (irq_map[i].host == host &&
+                    irq_map[i].hwirq == hwirq)
+                        return i;
+                i++;
+                if (i >= irq_virq_count)
+                        i = NUM_ISA_INTERRUPTS;
+        } while(i != hint);
+        return NO_IRQ;
+}
+EXPORT_SYMBOL_GPL(irq_find_mapping);
 
-void irq_ctx_init(void)
+
+unsigned int irq_radix_revmap(struct irq_host *host,
+                              irq_hw_number_t hwirq)
 {
-        struct thread_info *tp;
-        int i;
+        struct radix_tree_root *tree;
+        struct irq_map_entry *ptr;
+        unsigned int virq;
+        unsigned long flags;
 
-        for_each_possible_cpu(i) {
-                memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
-                tp = softirq_ctx[i];
-                tp->cpu = i;
-                tp->preempt_count = SOFTIRQ_OFFSET;
+        WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
 
-                memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
-                tp = hardirq_ctx[i];
-                tp->cpu = i;
-                tp->preempt_count = HARDIRQ_OFFSET;
+        /* Check if the radix tree exist yet. We test the value of
+         * the gfp_mask for that. Sneaky but saves another int in the
+         * structure. If not, we fallback to slow mode
+         */
+        tree = &host->revmap_data.tree;
+        if (tree->gfp_mask == 0)
+                return irq_find_mapping(host, hwirq);
+
+        /* XXX Current radix trees are NOT SMP safe !!! Remove that lock
+         * when that is fixed (when Nick's patch gets in
+         */
+        spin_lock_irqsave(&irq_big_lock, flags);
+
+        /* Now try to resolve */
+        ptr = radix_tree_lookup(tree, hwirq);
+        /* Found it, return */
+        if (ptr) {
+                virq = ptr - irq_map;
+                goto bail;
         }
+
+        /* If not there, try to insert it */
+        virq = irq_find_mapping(host, hwirq);
+        if (virq != NO_IRQ)
+                radix_tree_insert(tree, virq, &irq_map[virq]);
+ bail:
+        spin_unlock_irqrestore(&irq_big_lock, flags);
+        return virq;
 }
 
-static inline void do_softirq_onstack(void)
+unsigned int irq_linear_revmap(struct irq_host *host,
+                               irq_hw_number_t hwirq)
 {
-        struct thread_info *curtp, *irqtp;
+        unsigned int *revmap;
 
-        curtp = current_thread_info();
-        irqtp = softirq_ctx[smp_processor_id()];
-        irqtp->task = curtp->task;
-        call_do_softirq(irqtp);
-        irqtp->task = NULL;
+        WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR);
+
+        /* Check revmap bounds */
+        if (unlikely(hwirq >= host->revmap_data.linear.size))
+                return irq_find_mapping(host, hwirq);
+
+        /* Check if revmap was allocated */
+        revmap = host->revmap_data.linear.revmap;
+        if (unlikely(revmap == NULL))
+                return irq_find_mapping(host, hwirq);
+
+        /* Fill up revmap with slow path if no mapping found */
+        if (unlikely(revmap[hwirq] == NO_IRQ))
+                revmap[hwirq] = irq_find_mapping(host, hwirq);
+
+        return revmap[hwirq];
 }
 
-#else
-#define do_softirq_onstack()    __do_softirq()
-#endif /* CONFIG_IRQSTACKS */
+unsigned int irq_alloc_virt(struct irq_host *host,
+                            unsigned int count,
+                            unsigned int hint)
+{
+        unsigned long flags;
+        unsigned int i, j, found = NO_IRQ;
+        unsigned int limit = irq_virq_count - count;
 
-void do_softirq(void)
+        if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
+                return NO_IRQ;
+
+        spin_lock_irqsave(&irq_big_lock, flags);
+
+        /* Use hint for 1 interrupt if any */
+        if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
+            hint < irq_virq_count && irq_map[hint].host == NULL) {
+                found = hint;
+                goto hint_found;
+        }
+
+        /* Look for count consecutive numbers in the allocatable
+         * (non-legacy) space
+         */
+        for (i = NUM_ISA_INTERRUPTS; i <= limit; ) {
+                for (j = i; j < (i + count); j++)
+                        if (irq_map[j].host != NULL) {
+                                i = j + 1;
+                                continue;
+                        }
+                found = i;
+                break;
+        }
+        if (found == NO_IRQ) {
+                spin_unlock_irqrestore(&irq_big_lock, flags);
+                return NO_IRQ;
+        }
+ hint_found:
+        for (i = found; i < (found + count); i++) {
+                irq_map[i].hwirq = host->inval_irq;
+                smp_wmb();
+                irq_map[i].host = host;
+        }
+        spin_unlock_irqrestore(&irq_big_lock, flags);
+        return found;
+}
+
+void irq_free_virt(unsigned int virq, unsigned int count)
 {
         unsigned long flags;
+        unsigned int i;
 
-        if (in_interrupt())
-                return;
+        WARN_ON (virq < NUM_ISA_INTERRUPTS);
+        WARN_ON (count == 0 || (virq + count) > irq_virq_count);
 
-        local_irq_save(flags);
+        spin_lock_irqsave(&irq_big_lock, flags);
+        for (i = virq; i < (virq + count); i++) {
+                struct irq_host *host;
 
-        if (local_softirq_pending())
-                do_softirq_onstack();
+                if (i < NUM_ISA_INTERRUPTS ||
+                    (virq + count) > irq_virq_count)
+                        continue;
 
-        local_irq_restore(flags);
+                host = irq_map[i].host;
+                irq_map[i].hwirq = host->inval_irq;
+                smp_wmb();
+                irq_map[i].host = NULL;
+        }
+        spin_unlock_irqrestore(&irq_big_lock, flags);
 }
-EXPORT_SYMBOL(do_softirq);
+
+void irq_early_init(void)
+{
+        unsigned int i;
+
+        for (i = 0; i < NR_IRQS; i++)
+                get_irq_desc(i)->status |= IRQ_NOREQUEST;
+}
+
+/* We need to create the radix trees late */
+static int irq_late_init(void)
+{
+        struct irq_host *h;
+        unsigned long flags;
+
+        spin_lock_irqsave(&irq_big_lock, flags);
+        list_for_each_entry(h, &irq_hosts, link) {
+                if (h->revmap_type == IRQ_HOST_MAP_TREE)
+                        INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
+        }
+        spin_unlock_irqrestore(&irq_big_lock, flags);
+
+        return 0;
+}
+arch_initcall(irq_late_init);
+
+#endif /* CONFIG_PPC_MERGE */
 
 #ifdef CONFIG_PCI_MSI
 int pci_enable_msi(struct pci_dev * pdev)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4cf0b971976b..7e98e778b52f 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -28,6 +28,7 @@ static struct legacy_serial_info {
         struct device_node              *np;
         unsigned int                    speed;
         unsigned int                    clock;
+        int                             irq_check_parent;
         phys_addr_t                     taddr;
 } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
 static unsigned int legacy_serial_count;
@@ -36,7 +37,7 @@ static int legacy_serial_console = -1;
 static int __init add_legacy_port(struct device_node *np, int want_index,
                                   int iotype, phys_addr_t base,
                                   phys_addr_t taddr, unsigned long irq,
-                                  upf_t flags)
+                                  upf_t flags, int irq_check_parent)
 {
         u32 *clk, *spd, clock = BASE_BAUD * 16;
         int index;
@@ -68,7 +69,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
         if (legacy_serial_infos[index].np != 0) {
                 /* if we still have some room, move it, else override */
                 if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
-                        printk(KERN_INFO "Moved legacy port %d -> %d\n",
+                        printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
                                index, legacy_serial_count);
                         legacy_serial_ports[legacy_serial_count] =
                                 legacy_serial_ports[index];
@@ -76,7 +77,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
                                 legacy_serial_infos[index];
                         legacy_serial_count++;
                 } else {
-                        printk(KERN_INFO "Replacing legacy port %d\n", index);
+                        printk(KERN_DEBUG "Replacing legacy port %d\n", index);
                 }
         }
 
@@ -95,10 +96,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
         legacy_serial_infos[index].np = of_node_get(np);
         legacy_serial_infos[index].clock = clock;
         legacy_serial_infos[index].speed = spd ? *spd : 0;
+        legacy_serial_infos[index].irq_check_parent = irq_check_parent;
 
-        printk(KERN_INFO "Found legacy serial port %d for %s\n",
+        printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
                index, np->full_name);
-        printk(KERN_INFO "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+        printk(KERN_DEBUG "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
                (iotype == UPIO_PORT) ? "port" : "mem",
                (unsigned long long)base, (unsigned long long)taddr, irq,
                legacy_serial_ports[index].uartclk,
@@ -126,11 +128,13 @@ static int __init add_legacy_soc_port(struct device_node *np,
                 return -1;
 
         addr = of_translate_address(soc_dev, addrp);
+        if (addr == OF_BAD_ADDR)
+                return -1;
 
         /* Add port, irq will be dealt with later. We passed a translated
          * IO port value. It will be fixed up later along with the irq
          */
-        return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
+        return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -141,6 +145,8 @@ static int __init add_legacy_isa_port(struct device_node *np,
         int index = -1;
         phys_addr_t taddr;
 
+        DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
+
         /* Get the ISA port number */
         reg = (u32 *)get_property(np, "reg", NULL);
         if (reg == NULL)
@@ -161,9 +167,12 @@ static int __init add_legacy_isa_port(struct device_node *np,
 
         /* Translate ISA address */
         taddr = of_translate_address(np, reg);
+        if (taddr == OF_BAD_ADDR)
+                return -1;
 
         /* Add port, irq will be dealt with later */
-        return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
+        return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr,
+                               NO_IRQ, UPF_BOOT_AUTOCONF, 0);
 
 }
 
@@ -176,6 +185,8 @@ static int __init add_legacy_pci_port(struct device_node *np,
         unsigned int flags;
         int iotype, index = -1, lindex = 0;
 
+        DBG(" -> add_legacy_pci_port(%s)\n", np->full_name);
+
         /* We only support ports that have a clock frequency properly
          * encoded in the device-tree (that is have an fcode). Anything
          * else can't be used that early and will be normally probed by
@@ -194,6 +205,8 @@ static int __init add_legacy_pci_port(struct device_node *np,
         /* We only support BAR 0 for now */
         iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
         addr = of_translate_address(pci_dev, addrp);
+        if (addr == OF_BAD_ADDR)
+                return -1;
 
         /* Set the IO base to the same as the translated address for MMIO,
          * or to the domain local IO base for PIO (it will be fixed up later)
@@ -231,7 +244,8 @@ static int __init add_legacy_pci_port(struct device_node *np,
         /* Add port, irq will be dealt with later. We passed a translated
          * IO port value. It will be fixed up later along with the irq
          */
-        return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
+        return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
+                               UPF_BOOT_AUTOCONF, np != pci_dev);
 }
 #endif
 
@@ -362,27 +376,22 @@ static void __init fixup_port_irq(int index,
                                   struct device_node *np,
                                   struct plat_serial8250_port *port)
 {
+        unsigned int virq;
+
         DBG("fixup_port_irq(%d)\n", index);
 
-        /* Check for interrupts in that node */
-        if (np->n_intrs > 0) {
-                port->irq = np->intrs[0].line;
-                DBG(" port %d (%s), irq=%d\n",
-                    index, np->full_name, port->irq);
-                return;
+        virq = irq_of_parse_and_map(np, 0);
+        if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
+                np = of_get_parent(np);
+                if (np == NULL)
+                        return;
+                virq = irq_of_parse_and_map(np, 0);
+                of_node_put(np);
         }
-
-        /* Check for interrupts in the parent */
-        np = of_get_parent(np);
-        if (np == NULL)
+        if (virq == NO_IRQ)
                 return;
 
-        if (np->n_intrs > 0) {
-                port->irq = np->intrs[0].line;
-                DBG(" port %d (%s), irq=%d\n",
-                    index, np->full_name, port->irq);
-        }
-        of_node_put(np);
+        port->irq = virq;
 }
 
 static void __init fixup_port_pio(int index,
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 0c3c70d115c6..bfb407fc1aa1 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -51,12 +51,14 @@ _GLOBAL(call_do_softirq)
         mtlr    r0
         blr
 
-_GLOBAL(call___do_IRQ)
+_GLOBAL(call_handle_irq)
+        ld      r8,0(r7)
         mflr    r0
         std     r0,16(r1)
-        stdu    r1,THREAD_SIZE-112(r5)
-        mr      r1,r5
-        bl      .__do_IRQ
+        mtctr   r8
+        stdu    r1,THREAD_SIZE-112(r6)
+        mr      r1,r6
+        bctrl
         ld      r1,0(r1)
         ld      r0,16(r1)
         mtlr    r0
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 1333335c474e..898dae8ab6d9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -1404,6 +1404,43 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
         /* XXX FIXME - update OF device tree node interrupt property */
 }
 
+#ifdef CONFIG_PPC_MERGE
+/* XXX This is a copy of the ppc64 version. This is temporary until we start
+ * merging the 2 PCI layers
+ */
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+        struct of_irq oirq;
+        unsigned int virq;
+
+        DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+
+        if (of_irq_map_pci(pci_dev, &oirq)) {
+                DBG(" -> failed !\n");
+                return -1;
+        }
+
+        DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+            oirq.size, oirq.specifier[0], oirq.controller->full_name);
+
+        virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+        if(virq == NO_IRQ) {
+                DBG(" -> failed to map !\n");
+                return -1;
+        }
+        pci_dev->irq = virq;
+        pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
+
+        return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+#endif /* CONFIG_PPC_MERGE */
+
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
         u16 cmd, old_cmd;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index bea8451fb57b..efc0b5559ee0 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -398,12 +398,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
         } else {
                 dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
                 dev->rom_base_reg = PCI_ROM_ADDRESS;
+                /* Maybe do a default OF mapping here */
                 dev->irq = NO_IRQ;
-                if (node->n_intrs > 0) {
-                        dev->irq = node->intrs[0].line;
-                        pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
-                                              dev->irq);
-                }
         }
 
         pci_parse_of_addrs(node, dev);
@@ -1288,23 +1284,26 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
  */
 int pci_read_irq_line(struct pci_dev *pci_dev)
 {
-        u8 intpin;
-        struct device_node *node;
-
-        pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin);
-        if (intpin == 0)
-                return 0;
+        struct of_irq oirq;
+        unsigned int virq;
 
-        node = pci_device_to_OF_node(pci_dev);
-        if (node == NULL)
-                return -1;
+        DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
-        if (node->n_intrs == 0)
+        if (of_irq_map_pci(pci_dev, &oirq)) {
+                DBG(" -> failed !\n");
                 return -1;
+        }
 
-        pci_dev->irq = node->intrs[0].line;
+        DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+            oirq.size, oirq.specifier[0], oirq.controller->full_name);
 
-        pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq);
+        virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+        if(virq == NO_IRQ) {
+                DBG(" -> failed to map !\n");
+                return -1;
+        }
+        pci_dev->irq = virq;
+        pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
 
         return 0;
 }
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4c524cb52184..a1787ffb6319 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
+#include <linux/irq.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -86,424 +87,6 @@ static DEFINE_RWLOCK(devtree_lock);
 /* export that to outside world */
 struct device_node *of_chosen;
 
-struct device_node *dflt_interrupt_controller;
-int num_interrupt_controllers;
-
-/*
- * Wrapper for allocating memory for various data that needs to be
- * attached to device nodes as they are processed at boot or when
- * added to the device tree later (e.g. DLPAR).  At boot there is
- * already a region reserved so we just increment *mem_start by size;
- * otherwise we call kmalloc.
- */
-static void * prom_alloc(unsigned long size, unsigned long *mem_start)
-{
-        unsigned long tmp;
-
-        if (!mem_start)
-                return kmalloc(size, GFP_KERNEL);
-
-        tmp = *mem_start;
-        *mem_start += size;
-        return (void *)tmp;
-}
-
-/*
- * Find the device_node with a given phandle.
- */
-static struct device_node * find_phandle(phandle ph)
-{
-        struct device_node *np;
-
-        for (np = allnodes; np != 0; np = np->allnext)
-                if (np->linux_phandle == ph)
-                        return np;
-        return NULL;
-}
-
-/*
- * Find the interrupt parent of a node.
- */
-static struct device_node * __devinit intr_parent(struct device_node *p)
-{
-        phandle *parp;
-
-        parp = (phandle *) get_property(p, "interrupt-parent", NULL);
-        if (parp == NULL)
-                return p->parent;
-        p = find_phandle(*parp);
-        if (p != NULL)
-                return p;
-        /*
-         * On a powermac booted with BootX, we don't get to know the
-         * phandles for any nodes, so find_phandle will return NULL.
-         * Fortunately these machines only have one interrupt controller
-         * so there isn't in fact any ambiguity.  -- paulus
-         */
-        if (num_interrupt_controllers == 1)
-                p = dflt_interrupt_controller;
-        return p;
-}
-
-/*
- * Find out the size of each entry of the interrupts property
- * for a node.
- */
-int __devinit prom_n_intr_cells(struct device_node *np)
-{
-        struct device_node *p;
-        unsigned int *icp;
-
-        for (p = np; (p = intr_parent(p)) != NULL; ) {
-                icp = (unsigned int *)
-                        get_property(p, "#interrupt-cells", NULL);
-                if (icp != NULL)
-                        return *icp;
-                if (get_property(p, "interrupt-controller", NULL) != NULL
-                    || get_property(p, "interrupt-map", NULL) != NULL) {
-                        printk("oops, node %s doesn't have #interrupt-cells\n",
-                               p->full_name);
-                        return 1;
-                }
-        }
-#ifdef DEBUG_IRQ
-        printk("prom_n_intr_cells failed for %s\n", np->full_name);
-#endif
-        return 1;
-}
-
-/*
- * Map an interrupt from a device up to the platform interrupt
- * descriptor.
- */
-static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler,
-                                   struct device_node *np, unsigned int *ints,
-                                   int nintrc)
-{
-        struct device_node *p, *ipar;
-        unsigned int *imap, *imask, *ip;
-        int i, imaplen, match;
-        int newintrc = 0, newaddrc = 0;
-        unsigned int *reg;
-        int naddrc;
-
-        reg = (unsigned int *) get_property(np, "reg", NULL);
-        naddrc = prom_n_addr_cells(np);
-        p = intr_parent(np);
-        while (p != NULL) {
-                if (get_property(p, "interrupt-controller", NULL) != NULL)
-                        /* this node is an interrupt controller, stop here */
-                        break;
-                imap = (unsigned int *)
-                        get_property(p, "interrupt-map", &imaplen);
-                if (imap == NULL) {
-                        p = intr_parent(p);
-                        continue;
-                }
-                imask = (unsigned int *)
-                        get_property(p, "interrupt-map-mask", NULL);
-                if (imask == NULL) {
-                        printk("oops, %s has interrupt-map but no mask\n",
-                               p->full_name);
-                        return 0;
-                }
-                imaplen /= sizeof(unsigned int);
-                match = 0;
-                ipar = NULL;
-                while (imaplen > 0 && !match) {
-                        /* check the child-interrupt field */
-                        match = 1;
-                        for (i = 0; i < naddrc && match; ++i)
-                                match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
-                        for (; i < naddrc + nintrc && match; ++i)
-                                match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
-                        imap += naddrc + nintrc;
-                        imaplen -= naddrc + nintrc;
-                        /* grab the interrupt parent */
-                        ipar = find_phandle((phandle) *imap++);
-                        --imaplen;
-                        if (ipar == NULL && num_interrupt_controllers == 1)
-                                /* cope with BootX not giving us phandles */
-                                ipar = dflt_interrupt_controller;
-                        if (ipar == NULL) {
-                                printk("oops, no int parent %x in map of %s\n",
-                                       imap[-1], p->full_name);
-                                return 0;
-                        }
-                        /* find the parent's # addr and intr cells */
-                        ip = (unsigned int *)
-                                get_property(ipar, "#interrupt-cells", NULL);
-                        if (ip == NULL) {
-                                printk("oops, no #interrupt-cells on %s\n",
-                                       ipar->full_name);
-                                return 0;
-                        }
-                        newintrc = *ip;
-                        ip = (unsigned int *)
-                                get_property(ipar, "#address-cells", NULL);
-                        newaddrc = (ip == NULL)? 0: *ip;
-                        imap += newaddrc + newintrc;
-                        imaplen -= newaddrc + newintrc;
-                }
-                if (imaplen < 0) {
-                        printk("oops, error decoding int-map on %s, len=%d\n",
-                               p->full_name, imaplen);
-                        return 0;
-                }
-                if (!match) {
-#ifdef DEBUG_IRQ
-                        printk("oops, no match in %s int-map for %s\n",
-                               p->full_name, np->full_name);
-#endif
-                        return 0;
-                }
-                p = ipar;
-                naddrc = newaddrc;
-                nintrc = newintrc;
-                ints = imap - nintrc;
-                reg = ints - naddrc;
-        }
-        if (p == NULL) {
-#ifdef DEBUG_IRQ
-                printk("hmmm, int tree for %s doesn't have ctrler\n",
-                       np->full_name);
-#endif
-                return 0;
-        }
-        *irq = ints;
-        *ictrler = p;
-        return nintrc;
-}
-
-static unsigned char map_isa_senses[4] = {
-        IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
-        IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
-        IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE,
-        IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE
-};
-
-static unsigned char map_mpic_senses[4] = {
-        IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE,
-        IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
-        /* 2 seems to be used for the 8259 cascade... */
-        IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
-        IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE,
-};
-
-static int __devinit finish_node_interrupts(struct device_node *np,
-                                            unsigned long *mem_start,
-                                            int measure_only)
-{
-        unsigned int *ints;
-        int intlen, intrcells, intrcount;
-        int i, j, n, sense;
-        unsigned int *irq, virq;
-        struct device_node *ic;
-        int trace = 0;
-
-        //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0)
-#define TRACE(fmt...)
-
-        if (!strcmp(np->name, "smu-doorbell"))
-                trace = 1;
-
-        TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n",
-              num_interrupt_controllers);
-
-        if (num_interrupt_controllers == 0) {
-                /*
-                 * Old machines just have a list of interrupt numbers
-                 * and no interrupt-controller nodes.
-                 */
-                ints = (unsigned int *) get_property(np, "AAPL,interrupts",
-                                                     &intlen);
-                /* XXX old interpret_pci_props looked in parent too */
-                /* XXX old interpret_macio_props looked for interrupts
-                   before AAPL,interrupts */
-                if (ints == NULL)
-                        ints = (unsigned int *) get_property(np, "interrupts",
-                                                             &intlen);
-                if (ints == NULL)
-                        return 0;
-
-                np->n_intrs = intlen / sizeof(unsigned int);
-                np->intrs = prom_alloc(np->n_intrs * sizeof(np->intrs[0]),
-                                       mem_start);
-                if (!np->intrs)
-                        return -ENOMEM;
-                if (measure_only)
-                        return 0;
-
-                for (i = 0; i < np->n_intrs; ++i) {
-                        np->intrs[i].line = *ints++;
-                        np->intrs[i].sense = IRQ_SENSE_LEVEL
-                                | IRQ_POLARITY_NEGATIVE;
-                }
-                return 0;
-        }
-
-        ints = (unsigned int *) get_property(np, "interrupts", &intlen);
-        TRACE("ints=%p, intlen=%d\n", ints, intlen);
-        if (ints == NULL)
-                return 0;
-        intrcells = prom_n_intr_cells(np);
-        intlen /= intrcells * sizeof(unsigned int);
-        TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen);
-        np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start);
-        if (!np->intrs)
-                return -ENOMEM;
-
-        if (measure_only)
-                return 0;
-
-        intrcount = 0;
-        for (i = 0; i < intlen; ++i, ints += intrcells) {
-                n = map_interrupt(&irq, &ic, np, ints, intrcells);
-                TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n);
-                if (n <= 0)
-                        continue;
-
-                /* don't map IRQ numbers under a cascaded 8259 controller */
-                if (ic && device_is_compatible(ic, "chrp,iic")) {
-                        np->intrs[intrcount].line = irq[0];
-                        sense = (n > 1)? (irq[1] & 3): 3;
-                        np->intrs[intrcount].sense = map_isa_senses[sense];
-                } else {
-                        virq = virt_irq_create_mapping(irq[0]);
-                        TRACE("virq=%d\n", virq);
-#ifdef CONFIG_PPC64
-                        if (virq == NO_IRQ) {
-                                printk(KERN_CRIT "Could not allocate interrupt"
-                                       " number for %s\n", np->full_name);
-                                continue;
-                        }
-#endif
-                        np->intrs[intrcount].line = irq_offset_up(virq);
-                        sense = (n > 1)? (irq[1] & 3): 1;
-
-                        /* Apple uses bits in there in a different way, let's
-                         * only keep the real sense bit on macs
-                         */
-                        if (machine_is(powermac))
-                                sense &= 0x1;
-                        np->intrs[intrcount].sense = map_mpic_senses[sense];
-                }
-
-#ifdef CONFIG_PPC64
-                /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
-                if (machine_is(powermac) && ic && ic->parent) {
-                        char *name = get_property(ic->parent, "name", NULL);
-                        if (name && !strcmp(name, "u3"))
-                                np->intrs[intrcount].line += 128;
-                        else if (!(name && (!strcmp(name, "mac-io") ||
-                                            !strcmp(name, "u4"))))
-                                /* ignore other cascaded controllers, such as
-                                   the k2-sata-root */
-                                break;
-                }
-#endif /* CONFIG_PPC64 */
-                if (n > 2) {
-                        printk("hmmm, got %d intr cells for %s:", n,
-                               np->full_name);
-                        for (j = 0; j < n; ++j)
-                                printk(" %d", irq[j]);
-                        printk("\n");
-                }
-                ++intrcount;
-        }
-        np->n_intrs = intrcount;
-
-        return 0;
-}
-
-static int __devinit finish_node(struct device_node *np,
-                                 unsigned long *mem_start,
-                                 int measure_only)
-{
-        struct device_node *child;
-        int rc = 0;
-
-        rc = finish_node_interrupts(np, mem_start, measure_only);
-        if (rc)
-                goto out;
-
-        for (child = np->child; child != NULL; child = child->sibling) {
-                rc = finish_node(child, mem_start, measure_only);
-                if (rc)
-                        goto out;
-        }
-out:
-        return rc;
-}
-
-static void __init scan_interrupt_controllers(void)
-{
-        struct device_node *np;
-        int n = 0;
-        char *name, *ic;
-        int iclen;
-
-        for (np = allnodes; np != NULL; np = np->allnext) {
-                ic = get_property(np, "interrupt-controller", &iclen);
-                name = get_property(np, "name", NULL);
-                /* checking iclen makes sure we don't get a false
-                   match on /chosen.interrupt_controller */
-                if ((name != NULL
-                     && strcmp(name, "interrupt-controller") == 0)
-                    || (ic != NULL && iclen == 0
-                        && strcmp(name, "AppleKiwi"))) {
-                        if (n == 0)
-                                dflt_interrupt_controller = np;
-                        ++n;
-                }
-        }
-        num_interrupt_controllers = n;
-}
-
-/**
- * finish_device_tree is called once things are running normally
- * (i.e. with text and data mapped to the address they were linked at).
- * It traverses the device tree and fills in some of the additional,
- * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt
- * mapping is also initialized at this point.
- */
-void __init finish_device_tree(void)
-{
-        unsigned long start, end, size = 0;
-
-        DBG(" -> finish_device_tree\n");
-
-#ifdef CONFIG_PPC64
-        /* Initialize virtual IRQ map */
-        virt_irq_init();
-#endif
-        scan_interrupt_controllers();
-
-        /*
-         * Finish device-tree (pre-parsing some properties etc...)
-         * We do this in 2 passes. One with "measure_only" set, which
-         * will only measure the amount of memory needed, then we can
-         * allocate that memory, and call finish_node again. However,
-         * we must be careful as most routines will fail nowadays when
-         * prom_alloc() returns 0, so we must make sure our first pass
-         * doesn't start at 0. We pre-initialize size to 16 for that
-         * reason and then remove those additional 16 bytes
-         */
-        size = 16;
-        finish_node(allnodes, &size, 1);
-        size -= 16;
-
-        if (0 == size)
-                end = start = 0;
-        else
-                end = start = (unsigned long)__va(lmb_alloc(size, 128));
-
-        finish_node(allnodes, &end, 0);
-        BUG_ON(end != start + size);
-
-        DBG(" <- finish_device_tree\n");
-}
-
 static inline char *find_flat_dt_string(u32 offset)
 {
         return ((char *)initial_boot_params) +
@@ -1389,27 +972,6 @@ prom_n_size_cells(struct device_node* np)
 EXPORT_SYMBOL(prom_n_size_cells);
 
 /**
- * Work out the sense (active-low level / active-high edge)
- * of each interrupt from the device tree.
- */
-void __init prom_get_irq_senses(unsigned char *senses, int off, int max)
-{
-        struct device_node *np;
-        int i, j;
-
-        /* default to level-triggered */
-        memset(senses, IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, max - off);
-
-        for (np = allnodes; np != 0; np = np->allnext) {
-                for (j = 0; j < np->n_intrs; j++) {
-                        i = np->intrs[j].line;
-                        if (i >= off && i < max)
-                                senses[i-off] = np->intrs[j].sense;
-                }
-        }
-}
-
-/**
  * Construct and return a list of the device_nodes with a given name.
  */
 struct device_node *find_devices(const char *name)
@@ -1808,7 +1370,6 @@ static void of_node_release(struct kref *kref)
                         node->deadprops = NULL;
                 }
         }
-        kfree(node->intrs);
         kfree(node->full_name);
         kfree(node->data);
         kfree(node);
@@ -1881,13 +1442,7 @@ void of_detach_node(const struct device_node *np)
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Fix up the uninitialized fields in a new device node:
- * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields
- *
- * A lot of boot-time code is duplicated here, because functions such
- * as finish_node_interrupts, interpret_pci_props, etc. cannot use the
- * slab allocator.
- *
- * This should probably be split up into smaller chunks.
+ * name, type and pci-specific fields
  */
 
 static int of_finish_dynamic_node(struct device_node *node)
@@ -1928,8 +1483,6 @@ static int prom_reconfig_notifier(struct notifier_block *nb,
         switch (action) {
         case PSERIES_RECONFIG_ADD:
                 err = of_finish_dynamic_node(node);
-                if (!err)
-                        finish_node(node, NULL, 0);
                 if (err < 0) {
                         printk(KERN_ERR "finish_node returned %d\n", err);
                         err = NOTIFY_BAD;
@@ -1975,8 +1528,7 @@ struct property *of_find_property(struct device_node *np, const char *name,
  * Find a property with a given name for a given node
  * and return the value.
  */
-unsigned char *get_property(struct device_node *np, const char *name,
-                            int *lenp)
+void *get_property(struct device_node *np, const char *name, int *lenp)
 {
         struct property *pp = of_find_property(np,name,lenp);
         return pp ? pp->value : NULL;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1e95a9f8cda1..ebd501a59abd 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1990,12 +1990,22 @@ static void __init flatten_device_tree(void)
 static void __init fixup_device_tree_maple(void)
 {
         phandle isa;
+        u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
         u32 isa_ranges[6];
-
-        isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+        char *name;
+
+        name = "/ht@0/isa@4";
+        isa = call_prom("finddevice", 1, 1, ADDR(name));
+        if (!PHANDLE_VALID(isa)) {
+                name = "/ht@0/isa@6";
+                isa = call_prom("finddevice", 1, 1, ADDR(name));
+                rloc = 0x01003000; /* IO space; PCI device = 6 */
+        }
         if (!PHANDLE_VALID(isa))
                 return;
 
+        if (prom_getproplen(isa, "ranges") != 12)
+                return;
         if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
                 == PROM_ERROR)
                 return;
@@ -2005,15 +2015,15 @@ static void __init fixup_device_tree_maple(void)
                 isa_ranges[2] != 0x00010000)
                 return;
 
-        prom_printf("fixing up bogus ISA range on Maple...\n");
+        prom_printf("Fixing up bogus ISA range on Maple/Apache...\n");
 
         isa_ranges[0] = 0x1;
         isa_ranges[1] = 0x0;
-        isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+        isa_ranges[2] = rloc;
         isa_ranges[3] = 0x0;
         isa_ranges[4] = 0x0;
         isa_ranges[5] = 0x00010000;
-        prom_setprop(isa, "/ht@0/isa@4", "ranges",
+        prom_setprop(isa, name, "ranges",
                         isa_ranges, sizeof(isa_ranges));
 }
 #else
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 45df420383cc..21009b1f7869 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -38,14 +38,6 @@ static void of_dump_addr(const char *s, u32 *addr, int na)
 static void of_dump_addr(const char *s, u32 *addr, int na) { }
 #endif
 
-/* Read a big address */
-static inline u64 of_read_addr(u32 *cell, int size)
-{
-        u64 r = 0;
-        while (size--)
-                r = (r << 32) | *(cell++);
-        return r;
-}
 
 /* Callbacks for bus specific translators */
 struct of_bus {
@@ -77,9 +69,9 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
 {
         u64 cp, s, da;
 
-        cp = of_read_addr(range, na);
-        s  = of_read_addr(range + na + pna, ns);
-        da = of_read_addr(addr, na);
+        cp = of_read_number(range, na);
+        s  = of_read_number(range + na + pna, ns);
+        da = of_read_number(addr, na);
 
         DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
             cp, s, da);
@@ -91,7 +83,7 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
 
 static int of_bus_default_translate(u32 *addr, u64 offset, int na)
 {
-        u64 a = of_read_addr(addr, na);
+        u64 a = of_read_number(addr, na);
         memset(addr, 0, na * 4);
         a += offset;
         if (na > 1)
@@ -135,9 +127,9 @@ static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
                 return OF_BAD_ADDR;
 
         /* Read address values, skipping high cell */
-        cp = of_read_addr(range + 1, na - 1);
-        s  = of_read_addr(range + na + pna, ns);
-        da = of_read_addr(addr + 1, na - 1);
+        cp = of_read_number(range + 1, na - 1);
+        s  = of_read_number(range + na + pna, ns);
+        da = of_read_number(addr + 1, na - 1);
 
         DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
 
@@ -195,9 +187,9 @@ static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
                 return OF_BAD_ADDR;
 
         /* Read address values, skipping high cell */
-        cp = of_read_addr(range + 1, na - 1);
-        s  = of_read_addr(range + na + pna, ns);
-        da = of_read_addr(addr + 1, na - 1);
+        cp = of_read_number(range + 1, na - 1);
+        s  = of_read_number(range + na + pna, ns);
+        da = of_read_number(addr + 1, na - 1);
 
         DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
 
@@ -295,7 +287,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
          */
         ranges = (u32 *)get_property(parent, "ranges", &rlen);
         if (ranges == NULL || rlen == 0) {
-                offset = of_read_addr(addr, na);
+                offset = of_read_number(addr, na);
                 memset(addr, 0, pna * 4);
                 DBG("OF: no ranges, 1:1 translation\n");
                 goto finish;
@@ -378,7 +370,7 @@ u64 of_translate_address(struct device_node *dev, u32 *in_addr)
                 /* If root, we have finished */
                 if (parent == NULL) {
                         DBG("OF: reached root node\n");
-                        result = of_read_addr(addr, na);
+                        result = of_read_number(addr, na);
                         break;
                 }
 
@@ -442,7 +434,7 @@ u32 *of_get_address(struct device_node *dev, int index, u64 *size,
         for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
                 if (i == index) {
                         if (size)
-                                *size = of_read_addr(prop + na, ns);
+                                *size = of_read_number(prop + na, ns);
                         if (flags)
                                 *flags = bus->get_flags(prop);
                         return prop;
@@ -484,7 +476,7 @@ u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
         for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
                 if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
                         if (size)
-                                *size = of_read_addr(prop + na, ns);
+                                *size = of_read_number(prop + na, ns);
                         if (flags)
                                 *flags = bus->get_flags(prop);
                         return prop;
@@ -565,11 +557,414 @@ void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
                 prop = get_property(dn, "#address-cells", NULL);
 
         cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
-        *phys = of_read_addr(dma_window, cells);
+        *phys = of_read_number(dma_window, cells);
 
         dma_window += cells;
 
         prop = get_property(dn, "ibm,#dma-size-cells", NULL);
         cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
-        *size = of_read_addr(dma_window, cells);
+        *size = of_read_number(dma_window, cells);
+}
+
+/*
+ * Interrupt remapper
+ */
+
+static unsigned int of_irq_workarounds;
+static struct device_node *of_irq_dflt_pic;
+
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+        struct device_node *p;
+        phandle *parp;
+
+        if (!of_node_get(child))
+                return NULL;
+
+        do {
+                parp = (phandle *)get_property(child, "interrupt-parent", NULL);
+                if (parp == NULL)
+                        p = of_get_parent(child);
+                else {
+                        if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+                                p = of_node_get(of_irq_dflt_pic);
+                        else
+                                p = of_find_node_by_phandle(*parp);
+                }
+                of_node_put(child);
+                child = p;
+        } while (p && get_property(p, "#interrupt-cells", NULL) == NULL);
+
+        return p;
+}
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+        return (((pin - 1) + slot) % 4) + 1;
 }
+
+/* This doesn't need to be called if you don't have any special workaround
+ * flags to pass
+ */
+void of_irq_map_init(unsigned int flags)
+{
+        of_irq_workarounds = flags;
+
+        /* OldWorld, don't bother looking at other things */
+        if (flags & OF_IMAP_OLDWORLD_MAC)
+                return;
+
+        /* If we don't have phandles, let's try to locate a default interrupt
+         * controller (happens when booting with BootX). We do a first match
+         * here, hopefully, that only ever happens on machines with one
+         * controller.
+         */
+        if (flags & OF_IMAP_NO_PHANDLE) {
+                struct device_node *np;
+
+                for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
+                        if (get_property(np, "interrupt-controller", NULL)
+                            == NULL)
+                                continue;
+                        /* Skip /chosen/interrupt-controller */
+                        if (strcmp(np->name, "chosen") == 0)
+                                continue;
+                        /* It seems like at least one person on this planet wants
+                         * to use BootX on a machine with an AppleKiwi controller
+                         * which happens to pretend to be an interrupt
+                         * controller too.
+                         */
+                        if (strcmp(np->name, "AppleKiwi") == 0)
+                                continue;
+                        /* I think we found one ! */
+                        of_irq_dflt_pic = np;
+                        break;
+                }
+        }
+
+}
+
+int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+                   struct of_irq *out_irq)
+{
+        struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+        u32 *tmp, *imap, *imask;
+        u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+        int imaplen, match, i;
+
+        ipar = of_node_get(parent);
+
+        /* First get the #interrupt-cells property of the current cursor
+         * that tells us how to interpret the passed-in intspec. If there
+         * is none, we are nice and just walk up the tree
+         */
+        do {
+                tmp = (u32 *)get_property(ipar, "#interrupt-cells", NULL);
+                if (tmp != NULL) {
+                        intsize = *tmp;
+                        break;
+                }
+                tnode = ipar;
+                ipar = of_irq_find_parent(ipar);
+                of_node_put(tnode);
+        } while (ipar);
+        if (ipar == NULL) {
+                DBG(" -> no parent found !\n");
+                goto fail;
+        }
+
+        DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
+
+        /* Look for this #address-cells. We have to implement the old linux
+         * trick of looking for the parent here as some device-trees rely on it
+         */
+        old = of_node_get(ipar);
+        do {
+                tmp = (u32 *)get_property(old, "#address-cells", NULL);
+                tnode = of_get_parent(old);
+                of_node_put(old);
+                old = tnode;
+        } while(old && tmp == NULL);
+        of_node_put(old);
+        old = NULL;
+        addrsize = (tmp == NULL) ? 2 : *tmp;
+
+        DBG(" -> addrsize=%d\n", addrsize);
+
+        /* Now start the actual "proper" walk of the interrupt tree */
+        while (ipar != NULL) {
+                /* Now check if cursor is an interrupt-controller and if it is
+                 * then we are done
+                 */
+                if (get_property(ipar, "interrupt-controller", NULL) != NULL) {
+                        DBG(" -> got it !\n");
+                        memcpy(out_irq->specifier, intspec,
+                               intsize * sizeof(u32));
+                        out_irq->size = intsize;
+                        out_irq->controller = ipar;
+                        of_node_put(old);
+                        return 0;
+                }
+
+                /* Now look for an interrupt-map */
+                imap = (u32 *)get_property(ipar, "interrupt-map", &imaplen);
+                /* No interrupt map, check for an interrupt parent */
+                if (imap == NULL) {
+                        DBG(" -> no map, getting parent\n");
+                        newpar = of_irq_find_parent(ipar);
+                        goto skiplevel;
+                }
+                imaplen /= sizeof(u32);
+
+                /* Look for a mask */
+                imask = (u32 *)get_property(ipar, "interrupt-map-mask", NULL);
+
+                /* If we were passed no "reg" property and we attempt to parse
+                 * an interrupt-map, then #address-cells must be 0.
+                 * Fail if it's not.
+                 */
+                if (addr == NULL && addrsize != 0) {
+                        DBG(" -> no reg passed in when needed !\n");
+                        goto fail;
+                }
+
+                /* Parse interrupt-map */
+                match = 0;
+                while (imaplen > (addrsize + intsize + 1) && !match) {
+                        /* Compare specifiers */
+                        match = 1;
+                        for (i = 0; i < addrsize && match; ++i) {
+                                u32 mask = imask ? imask[i] : 0xffffffffu;
+                                match = ((addr[i] ^ imap[i]) & mask) == 0;
+                        }
+                        for (; i < (addrsize + intsize) && match; ++i) {
+                                u32 mask = imask ? imask[i] : 0xffffffffu;
+                                match =
+                                   ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+                        }
+                        imap += addrsize + intsize;
+                        imaplen -= addrsize + intsize;
+
+                        DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+                        /* Get the interrupt parent */
+                        if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+                                newpar = of_node_get(of_irq_dflt_pic);
+                        else
+                                newpar = of_find_node_by_phandle((phandle)*imap);
+                        imap++;
+                        --imaplen;
+
+                        /* Check if not found */
+                        if (newpar == NULL) {
+                                DBG(" -> imap parent not found !\n");
+                                goto fail;
+                        }
+
+                        /* Get #interrupt-cells and #address-cells of new
+                         * parent
+                         */
+                        tmp = (u32 *)get_property(newpar, "#interrupt-cells",
+                                                  NULL);
+                        if (tmp == NULL) {
+                                DBG(" -> parent lacks #interrupt-cells !\n");
+                                goto fail;
+                        }
+                        newintsize = *tmp;
+                        tmp = (u32 *)get_property(newpar, "#address-cells",
+                                                  NULL);
+                        newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+                        DBG(" -> newintsize=%d, newaddrsize=%d\n",
+                            newintsize, newaddrsize);
+
+                        /* Check for malformed properties */
+                        if (imaplen < (newaddrsize + newintsize))
+                                goto fail;
+
+                        imap += newaddrsize + newintsize;
+                        imaplen -= newaddrsize + newintsize;
+
+                        DBG(" -> imaplen=%d\n", imaplen);
+                }
+                if (!match)
+                        goto fail;
+
+                of_node_put(old);
+                old = of_node_get(newpar);
+                addrsize = newaddrsize;
+                intsize = newintsize;
+                intspec = imap - intsize;
+                addr = intspec - addrsize;
+
+        skiplevel:
+                /* Iterate again with new parent */
+                DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
+                of_node_put(ipar);
+                ipar = newpar;
+                newpar = NULL;
+        }
+ fail:
+        of_node_put(ipar);
+        of_node_put(old);
+        of_node_put(newpar);
+
+        return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+static int of_irq_map_oldworld(struct device_node *device, int index,
+                               struct of_irq *out_irq)
+{
+        u32 *ints;
+        int intlen;
+
+        /*
+         * Old machines just have a list of interrupt numbers
+         * and no interrupt-controller nodes.
+         */
+        ints = (u32 *) get_property(device, "AAPL,interrupts", &intlen);
+        if (ints == NULL)
+                return -EINVAL;
+        intlen /= sizeof(u32);
+
+        if (index >= intlen)
+                return -EINVAL;
+
+        out_irq->controller = NULL;
+        out_irq->specifier[0] = ints[index];
+        out_irq->size = 1;
+
+        return 0;
+}
+#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */
+static int of_irq_map_oldworld(struct device_node *device, int index,
+                               struct of_irq *out_irq)
+{
+        return -EINVAL;
+}
+#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */
+
+int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
+{
+        struct device_node *p;
+        u32 *intspec, *tmp, intsize, intlen, *addr;
+        int res;
+
+        DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
+
+        /* OldWorld mac stuff is "special", handle out of line */
+        if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
+                return of_irq_map_oldworld(device, index, out_irq);
+
+        /* Get the interrupts property */
+        intspec = (u32 *)get_property(device, "interrupts", &intlen);
+        if (intspec == NULL)
+                return -EINVAL;
+        intlen /= sizeof(u32);
+
+        /* Get the reg property (if any) */
+        addr = (u32 *)get_property(device, "reg", NULL);
+
+        /* Look for the interrupt parent. */
+        p = of_irq_find_parent(device);
+        if (p == NULL)
+                return -EINVAL;
+
+        /* Get size of interrupt specifier */
+        tmp = (u32 *)get_property(p, "#interrupt-cells", NULL);
+        if (tmp == NULL) {
+                of_node_put(p);
+                return -EINVAL;
+        }
+        intsize = *tmp;
+
+        /* Check index */
+        if (index * intsize >= intlen)
+                return -EINVAL;
+
+        /* Get new specifier and map it */
+        res = of_irq_map_raw(p, intspec + index * intsize, addr, out_irq);
+        of_node_put(p);
+        return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+        struct device_node *dn, *ppnode;
+        struct pci_dev *ppdev;
+        u32 lspec;
+        u32 laddr[3];
+        u8 pin;
+        int rc;
+
+        /* Check if we have a device node, if yes, fallback to standard OF
+         * parsing
+         */
+        dn = pci_device_to_OF_node(pdev);
+        if (dn)
+                return of_irq_map_one(dn, 0, out_irq);
+
+        /* Ok, we don't, time to have fun. Let's start by building up an
+         * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+         * for PCI. If you do different, then don't use that routine.
+         */
+        rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+        if (rc != 0)
+                return rc;
+        /* No pin, exit */
+        if (pin == 0)
+                return -ENODEV;
+
+        /* Now we walk up the PCI tree */
+        lspec = pin;
+        for (;;) {
+                /* Get the pci_dev of our parent */
+                ppdev = pdev->bus->self;
+
+                /* Ouch, it's a host bridge... */
+                if (ppdev == NULL) {
+#ifdef CONFIG_PPC64
+                        ppnode = pci_bus_to_OF_node(pdev->bus);
+#else
+                        struct pci_controller *host;
+                        host = pci_bus_to_host(pdev->bus);
+                        ppnode = host ? host->arch_data : NULL;
+#endif
+                        /* No node for host bridge ? give up */
+                        if (ppnode == NULL)
+                                return -EINVAL;
+                } else
+                        /* We found a P2P bridge, check if it has a node */
+                        ppnode = pci_device_to_OF_node(ppdev);
+
+                /* Ok, we have found a parent with a device-node, hand over to
+                 * the OF parsing code.
+                 * We build a unit address from the linux device to be used for
+                 * resolution. Note that we use the linux bus number which may
+                 * not match your firmware bus numbering.
+                 * Fortunately, in most cases, interrupt-map-mask doesn't include
+                 * the bus number as part of the matching.
+                 * You should still be careful about that though if you intend
+                 * to rely on this function (you ship  a firmware that doesn't
+                 * create device nodes for all PCI devices).
+                 */
+                if (ppnode)
+                        break;
+
+                /* We can only get here if we hit a P2P bridge with no node,
+                 * let's do standard swizzling and try again
+                 */
+                lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+                pdev = ppdev;
+        }
+
+        laddr[0] = (pdev->bus->number << 16)
+                | (pdev->devfn << 8);
+        laddr[1]  = laddr[2] = 0;
+        return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 6eb7e49b394a..cda022657324 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -297,19 +297,9 @@ unsigned long __init find_and_init_phbs(void)
         struct device_node *node;
         struct pci_controller *phb;
         unsigned int index;
-        unsigned int root_size_cells = 0;
-        unsigned int *opprop = NULL;
         struct device_node *root = of_find_node_by_path("/");
 
-        if (ppc64_interrupt_controller == IC_OPEN_PIC) {
-                opprop = (unsigned int *)get_property(root,
-                                "platform-open-pic", NULL);
-        }
-
-        root_size_cells = prom_n_size_cells(root);
-
         index = 0;
-
         for (node = of_get_next_child(root, NULL);
              node != NULL;
              node = of_get_next_child(root, node)) {
@@ -324,13 +314,6 @@ unsigned long __init find_and_init_phbs(void)
                 setup_phb(node, phb);
                 pci_process_bridge_OF_ranges(phb, node, 0);
                 pci_setup_phb_io(phb, index == 0);
-#ifdef CONFIG_PPC_PSERIES
-                /* XXX This code need serious fixing ... --BenH */
-                if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) {
-                        int addr = root_size_cells * (index + 2) - 1;
-                        mpic_assign_isu(pSeries_mpic, index, opprop[addr]);
-                }
-#endif
                 index++;
         }
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index ba7cd50d820d..e0df2ba1ab9f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -51,7 +51,6 @@
 
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
-boot_infos_t *boot_infos;
 struct ide_machdep_calls ppc_ide_md;
 
 int boot_cpuid;
@@ -240,7 +239,6 @@ void __init setup_arch(char **cmdline_p)
                 ppc_md.init_early();
 
         find_legacy_serial_ports();
-        finish_device_tree();
 
         smp_setup_cpu_maps();
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index ac7276c40685..fd1785e4c9bb 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -361,12 +361,15 @@ void __init setup_system(void)
 
         /*
          * Fill the ppc64_caches & systemcfg structures with informations
-         * retrieved from the device-tree. Need to be called before
-         * finish_device_tree() since the later requires some of the
-         * informations filled up here to properly parse the interrupt tree.
+         * retrieved from the device-tree.
          */
         initialize_cache_info();
 
+        /*
+         * Initialize irq remapping subsystem
+         */
+        irq_early_init();
+
 #ifdef CONFIG_PPC_RTAS
         /*
          * Initialize RTAS if available
@@ -394,12 +397,6 @@ void __init setup_system(void)
         find_legacy_serial_ports();
 
         /*
-         * "Finish" the device-tree, that is do the actual parsing of
-         * some of the properties like the interrupt map
-         */
-        finish_device_tree();
-
-        /*
          * Initialize xmon
          */
 #ifdef CONFIG_XMON_DEFAULT
@@ -427,8 +424,6 @@ void __init setup_system(void)
 
         printk("-----------------------------------------------------\n");
         printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
-        printk("ppc64_interrupt_controller    = 0x%ld\n",
-               ppc64_interrupt_controller);
         printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
         printk("ppc64_caches.dcache_line_size = 0x%x\n",
                ppc64_caches.dline_size);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index cdf5867838a6..fad8580f9081 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -218,7 +218,6 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
 {
         struct vio_dev *viodev;
         unsigned int *unit_address;
-        unsigned int *irq_p;
 
         /* we need the 'device_type' property, in order to match with drivers */
         if (of_node->type == NULL) {
@@ -243,16 +242,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
 
         viodev->dev.platform_data = of_node_get(of_node);
 
-        viodev->irq = NO_IRQ;
-        irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL);
-        if (irq_p) {
-                int virq = virt_irq_create_mapping(*irq_p);
-                if (virq == NO_IRQ) {
-                        printk(KERN_ERR "Unable to allocate interrupt "
-                               "number for %s\n", of_node->full_name);
-                } else
-                        viodev->irq = irq_offset_up(virq);
-        }
+        viodev->irq = irq_of_parse_and_map(of_node, 0);
 
         snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
         viodev->name = of_node->name;
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7675e675dce1..5fe7b7faf45f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -16,12 +16,21 @@ config MPC834x_SYS
           3 PCI slots.  The PIBs PCI initialization is the bootloader's
           responsiblilty.
 
+config MPC834x_ITX
+        bool "Freescale MPC834x ITX"
+        select DEFAULT_UIMAGE
+        help
+          This option enables support for the MPC 834x ITX evaluation board.
+
+          Be aware that PCI initialization is the bootloader's
+          responsiblilty.
+
 endchoice
 
 config MPC834x
         bool
         select PPC_UDBG_16550
         select PPC_INDIRECT_PCI
-        default y if MPC834x_SYS
+        default y if MPC834x_SYS || MPC834x_ITX
 
 endmenu
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 5c72367441a8..9387a110d28a 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -4,3 +4,4 @@
 obj-y                           := misc.o
 obj-$(CONFIG_PCI)               += pci.o
 obj-$(CONFIG_MPC834x_SYS)       += mpc834x_sys.o
+obj-$(CONFIG_MPC834x_ITX)       += mpc834x_itx.o
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
new file mode 100644
index 000000000000..b46305645d38
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -0,0 +1,156 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.c
+ *
+ * MPC834x ITX board specific routines
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+#include <platforms/83xx/mpc834x_sys.h>
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+#ifdef CONFIG_PCI
+static int
+mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+        static char pci_irq_table[][4] =
+            /*
+             *      PCI IDSEL/INTPIN->INTLINE
+             *       A      B      C      D
+             */
+        {
+                {PIRQB, PIRQC, PIRQD, PIRQA},   /* idsel 0x0e */
+                {PIRQA, PIRQB, PIRQC, PIRQD},   /* idsel 0x0f */
+                {PIRQC, PIRQD, PIRQA, PIRQB},   /* idsel 0x10 */
+        };
+
+        const long min_idsel = 0x0e, max_idsel = 0x10, irqs_per_slot = 4;
+        return PCI_IRQ_TABLE_LOOKUP;
+}
+#endif                          /* CONFIG_PCI */
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc834x_itx_setup_arch(void)
+{
+        struct device_node *np;
+
+        if (ppc_md.progress)
+                ppc_md.progress("mpc834x_itx_setup_arch()", 0);
+
+        np = of_find_node_by_type(NULL, "cpu");
+        if (np != 0) {
+                unsigned int *fp =
+                    (int *)get_property(np, "clock-frequency", NULL);
+                if (fp != 0)
+                        loops_per_jiffy = *fp / HZ;
+                else
+                        loops_per_jiffy = 50000000 / HZ;
+                of_node_put(np);
+        }
+#ifdef CONFIG_PCI
+        for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+                add_bridge(np);
+
+        ppc_md.pci_swizzle = common_swizzle;
+        ppc_md.pci_map_irq = mpc83xx_map_irq;
+        ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef  CONFIG_ROOT_NFS
+        ROOT_DEV = Root_NFS;
+#else
+        ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc834x_itx_init_IRQ(void)
+{
+        u8 senses[8] = {
+                0,                      /* EXT 0 */
+                IRQ_SENSE_LEVEL,        /* EXT 1 */
+                IRQ_SENSE_LEVEL,        /* EXT 2 */
+                0,                      /* EXT 3 */
+#ifdef CONFIG_PCI
+                IRQ_SENSE_LEVEL,        /* EXT 4 */
+                IRQ_SENSE_LEVEL,        /* EXT 5 */
+                IRQ_SENSE_LEVEL,        /* EXT 6 */
+                IRQ_SENSE_LEVEL,        /* EXT 7 */
+#else
+                0,                      /* EXT 4 */
+                0,                      /* EXT 5 */
+                0,                      /* EXT 6 */
+                0,                      /* EXT 7 */
+#endif
+        };
+
+        ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8);
+
+        /* Initialize the default interrupt mapping priorities,
+         * in case the boot rom changed something on us.
+         */
+        ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_itx_probe(void)
+{
+        /* We always match for now, eventually we should look at the flat
+           dev tree to ensure this is the board we are suppose to run on
+        */
+        return 1;
+}
+
+define_machine(mpc834x_itx) {
+        .name                   = "MPC834x ITX",
+        .probe                  = mpc834x_itx_probe,
+        .setup_arch             = mpc834x_itx_setup_arch,
+        .init_IRQ               = mpc834x_itx_init_IRQ,
+        .get_irq                = ipic_get_irq,
+        .restart                = mpc83xx_restart,
+        .time_init              = mpc83xx_time_init,
+        .calibrate_decr         = generic_calibrate_decr,
+        .progress               = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.h b/arch/powerpc/platforms/83xx/mpc834x_itx.h
new file mode 100644
index 000000000000..174ca4ef55f3
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.h
@@ -0,0 +1,23 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.h
+ *
+ * MPC834X ITX common board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC83XX_ITX_H__
+#define __MACH_MPC83XX_ITX_H__
+
+#define PIRQA   MPC83xx_IRQ_EXT4
+#define PIRQB   MPC83xx_IRQ_EXT5
+#define PIRQC   MPC83xx_IRQ_EXT6
+#define PIRQD   MPC83xx_IRQ_EXT7
+
+#endif                          /* __MACH_MPC83XX_ITX_H__ */
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 22da1335445a..9d5da7896892 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -1,6 +1,9 @@
 /*
  * Cell Internal Interrupt Controller
  *
+ * Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *                    IBM, Corp.
+ *
  * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
  *
  * Author: Arnd Bergmann <arndb@de.ibm.com>
@@ -25,11 +28,13 @@
 #include <linux/module.h>
 #include <linux/percpu.h>
 #include <linux/types.h>
+#include <linux/ioport.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/ptrace.h>
+#include <asm/machdep.h>
 
 #include "interrupt.h"
 #include "cbe_regs.h"
@@ -37,231 +42,65 @@
 struct iic {
         struct cbe_iic_thread_regs __iomem *regs;
         u8 target_id;
+        u8 eoi_stack[16];
+        int eoi_ptr;
+        struct irq_host *host;
 };
 
 static DEFINE_PER_CPU(struct iic, iic);
+#define IIC_NODE_COUNT  2
+static struct irq_host *iic_hosts[IIC_NODE_COUNT];
 
-void iic_local_enable(void)
+/* Convert between "pending" bits and hw irq number */
+static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
 {
-        struct iic *iic = &__get_cpu_var(iic);
-        u64 tmp;
-
-        /*
-         * There seems to be a bug that is present in DD2.x CPUs
-         * and still only partially fixed in DD3.1.
-         * This bug causes a value written to the priority register
-         * not to make it there, resulting in a system hang unless we
-         * write it again.
-         * Masking with 0xf0 is done because the Cell BE does not
-         * implement the lower four bits of the interrupt priority,
-         * they always read back as zeroes, although future CPUs
-         * might implement different bits.
-         */
-        do {
-                out_be64(&iic->regs->prio, 0xff);
-                tmp = in_be64(&iic->regs->prio);
-        } while ((tmp & 0xf0) != 0xf0);
-}
-
-void iic_local_disable(void)
-{
-        out_be64(&__get_cpu_var(iic).regs->prio, 0x0);
-}
+        unsigned char unit = bits.source & 0xf;
 
-static unsigned int iic_startup(unsigned int irq)
-{
-        return 0;
+        if (bits.flags & CBE_IIC_IRQ_IPI)
+                return IIC_IRQ_IPI0 | (bits.prio >> 4);
+        else if (bits.class <= 3)
+                return (bits.class << 4) | unit;
+        else
+                return IIC_IRQ_INVALID;
 }
 
-static void iic_enable(unsigned int irq)
+static void iic_mask(unsigned int irq)
 {
-        iic_local_enable();
 }
 
-static void iic_disable(unsigned int irq)
+static void iic_unmask(unsigned int irq)
 {
 }
 
-static void iic_end(unsigned int irq)
+static void iic_eoi(unsigned int irq)
 {
-        iic_local_enable();
+        struct iic *iic = &__get_cpu_var(iic);
+        out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]);
+        BUG_ON(iic->eoi_ptr < 0);
 }
 
-static struct hw_interrupt_type iic_pic = {
+static struct irq_chip iic_chip = {
         .typename = " CELL-IIC ",
-        .startup = iic_startup,
-        .enable = iic_enable,
-        .disable = iic_disable,
-        .end = iic_end,
+        .mask = iic_mask,
+        .unmask = iic_unmask,
+        .eoi = iic_eoi,
 };
 
-static int iic_external_get_irq(struct cbe_iic_pending_bits pending)
-{
-        int irq;
-        unsigned char node, unit;
-
-        node = pending.source >> 4;
-        unit = pending.source & 0xf;
-        irq = -1;
-
-        /*
-         * This mapping is specific to the Cell Broadband
-         * Engine. We might need to get the numbers
-         * from the device tree to support future CPUs.
-         */
-        switch (unit) {
-        case 0x00:
-        case 0x0b:
-                /*
-                 * One of these units can be connected
-                 * to an external interrupt controller.
-                 */
-                if (pending.class != 2)
-                        break;
-                irq = IIC_EXT_OFFSET
-                        + spider_get_irq(node)
-                        + node * IIC_NODE_STRIDE;
-                break;
-        case 0x01 ... 0x04:
-        case 0x07 ... 0x0a:
-                /*
-                 * These units are connected to the SPEs
-                 */
-                if (pending.class > 2)
-                        break;
-                irq = IIC_SPE_OFFSET
-                        + pending.class * IIC_CLASS_STRIDE
-                        + node * IIC_NODE_STRIDE
-                        + unit;
-                break;
-        }
-        if (irq == -1)
-                printk(KERN_WARNING "Unexpected interrupt class %02x, "
-                        "source %02x, prio %02x, cpu %02x\n", pending.class,
-                        pending.source, pending.prio, smp_processor_id());
-        return irq;
-}
-
 /* Get an IRQ number from the pending state register of the IIC */
-int iic_get_irq(struct pt_regs *regs)
+static unsigned int iic_get_irq(struct pt_regs *regs)
 {
-        struct iic *iic;
-        int irq;
-        struct cbe_iic_pending_bits pending;
-
-        iic = &__get_cpu_var(iic);
-        *(unsigned long *) &pending = 
-                in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
-
-        irq = -1;
-        if (pending.flags & CBE_IIC_IRQ_VALID) {
-                if (pending.flags & CBE_IIC_IRQ_IPI) {
-                        irq = IIC_IPI_OFFSET + (pending.prio >> 4);
-/*
-                        if (irq > 0x80)
-                                printk(KERN_WARNING "Unexpected IPI prio %02x"
-                                        "on CPU %02x\n", pending.prio,
-                                                        smp_processor_id());
-*/
-                } else {
-                        irq = iic_external_get_irq(pending);
-                }
-        }
-        return irq;
-}
-
-/* hardcoded part to be compatible with older firmware */
-
-static int setup_iic_hardcoded(void)
-{
-        struct device_node *np;
-        int nodeid, cpu;
-        unsigned long regs;
-        struct iic *iic;
-
-        for_each_possible_cpu(cpu) {
-                iic = &per_cpu(iic, cpu);
-                nodeid = cpu/2;
-
-                for (np = of_find_node_by_type(NULL, "cpu");
-                     np;
-                     np = of_find_node_by_type(np, "cpu")) {
-                        if (nodeid == *(int *)get_property(np, "node-id", NULL))
-                                break;
-                        }
-
-                if (!np) {
-                        printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
-                        iic->regs = NULL;
-                        iic->target_id = 0xff;
-                        return -ENODEV;
-                        }
-
-                regs = *(long *)get_property(np, "iic", NULL);
-
-                /* hack until we have decided on the devtree info */
-                regs += 0x400;
-                if (cpu & 1)
-                        regs += 0x20;
-
-                printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
-                iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs));
-                iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
-        }
-
-        return 0;
-}
-
-static int setup_iic(void)
-{
-        struct device_node *dn;
-        unsigned long *regs;
-        char *compatible;
-        unsigned *np, found = 0;
-        struct iic *iic = NULL;
-
-        for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
-                compatible = (char *)get_property(dn, "compatible", NULL);
-
-                if (!compatible) {
-                        printk(KERN_WARNING "no compatible property found !\n");
-                        continue;
-                }
-
-                if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller"))
-                        regs = (unsigned long *)get_property(dn,"reg", NULL);
-                else
-                        continue;
-
-                if (!regs)
-                        printk(KERN_WARNING "IIC: no reg property\n");
-
-                np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL);
-
-                if (!np) {
-                        printk(KERN_WARNING "IIC: CPU association not found\n");
-                        iic->regs = NULL;
-                        iic->target_id = 0xff;
-                        return -ENODEV;
-                }
-
-                iic = &per_cpu(iic, np[0]);
-                iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs));
-                iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
-                printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
-
-                iic = &per_cpu(iic, np[1]);
-                iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs));
-                iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
-                printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
-
-                found++;
-        }
-
-        if (found)
-                return 0;
-        else
-                return -ENODEV;
+        struct cbe_iic_pending_bits pending;
+        struct iic *iic;
+
+        iic = &__get_cpu_var(iic);
+        *(unsigned long *) &pending =
+                in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+        iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
+        BUG_ON(iic->eoi_ptr > 15);
+        if (pending.flags & CBE_IIC_IRQ_VALID)
+                return irq_linear_revmap(iic->host,
+                                         iic_pending_to_hwnum(pending));
+        return NO_IRQ;
 }
 
 #ifdef CONFIG_SMP
@@ -269,12 +108,12 @@ static int setup_iic(void)
 /* Use the highest interrupt priorities for IPI */
 static inline int iic_ipi_to_irq(int ipi)
 {
-        return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi;
+        return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
 }
 
 static inline int iic_irq_to_ipi(int irq)
 {
-        return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET);
+        return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
 }
 
 void iic_setup_cpu(void)
@@ -293,22 +132,51 @@ u8 iic_get_target_id(int cpu)
 }
 EXPORT_SYMBOL_GPL(iic_get_target_id);
 
+struct irq_host *iic_get_irq_host(int node)
+{
+        if (node < 0 || node >= IIC_NODE_COUNT)
+                return NULL;
+        return iic_hosts[node];
+}
+EXPORT_SYMBOL_GPL(iic_get_irq_host);
+
+
 static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
 {
-        smp_message_recv(iic_irq_to_ipi(irq), regs);
+        int ipi = (int)(long)dev_id;
+
+        smp_message_recv(ipi, regs);
+
         return IRQ_HANDLED;
 }
 
 static void iic_request_ipi(int ipi, const char *name)
 {
-        int irq;
-
-        irq = iic_ipi_to_irq(ipi);
-        /* IPIs are marked IRQF_DISABLED as they must run with irqs
-         * disabled */
-        get_irq_desc(irq)->chip = &iic_pic;
-        get_irq_desc(irq)->status |= IRQ_PER_CPU;
-        request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL);
+        int node, virq;
+
+        for (node = 0; node < IIC_NODE_COUNT; node++) {
+                char *rname;
+                if (iic_hosts[node] == NULL)
+                        continue;
+                virq = irq_create_mapping(iic_hosts[node],
+                                          iic_ipi_to_irq(ipi), 0);
+                if (virq == NO_IRQ) {
+                        printk(KERN_ERR
+                               "iic: failed to map IPI %s on node %d\n",
+                               name, node);
+                        continue;
+                }
+                rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
+                if (rname)
+                        sprintf(rname, "%s node %d", name, node);
+                else
+                        rname = (char *)name;
+                if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
+                                rname, (void *)(long)ipi))
+                        printk(KERN_ERR
+                               "iic: failed to request IPI %s on node %d\n",
+                               name, node);
+        }
 }
 
 void iic_request_IPIs(void)
@@ -319,34 +187,119 @@ void iic_request_IPIs(void)
         iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
 #endif /* CONFIG_DEBUGGER */
 }
+
 #endif /* CONFIG_SMP */
 
-static void iic_setup_spe_handlers(void)
+
+static int iic_host_match(struct irq_host *h, struct device_node *node)
+{
+        return h->host_data != NULL && node == h->host_data;
+}
+
+static int iic_host_map(struct irq_host *h, unsigned int virq,
+                        irq_hw_number_t hw, unsigned int flags)
+{
+        if (hw < IIC_IRQ_IPI0)
+                set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
+        else
+                set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
+        return 0;
+}
+
+static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
+                           u32 *intspec, unsigned int intsize,
+                           irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+        /* Currently, we don't translate anything. That needs to be fixed as
+         * we get better defined device-trees. iic interrupts have to be
+         * explicitely mapped by whoever needs them
+         */
+        return -ENODEV;
+}
+
+static struct irq_host_ops iic_host_ops = {
+        .match = iic_host_match,
+        .map = iic_host_map,
+        .xlate = iic_host_xlate,
+};
+
+static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
+                                struct irq_host *host)
 {
-        int be, isrc;
+        /* XXX FIXME: should locate the linux CPU number from the HW cpu
+         * number properly. We are lucky for now
+         */
+        struct iic *iic = &per_cpu(iic, hw_cpu);
+
+        iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs));
+        BUG_ON(iic->regs == NULL);
 
-        /* Assume two threads per BE are present */
-        for (be=0; be < num_present_cpus() / 2; be++) {
-                for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) {
-                        int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
-                        get_irq_desc(irq)->chip = &iic_pic;
+        iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
+        iic->eoi_stack[0] = 0xff;
+        iic->host = host;
+        out_be64(&iic->regs->prio, 0);
+
+        printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
+               hw_cpu, addr, iic->regs, iic->target_id);
+}
+
+static int __init setup_iic(void)
+{
+        struct device_node *dn;
+        struct resource r0, r1;
+        struct irq_host *host;
+        int found = 0;
+        u32 *np;
+
+        for (dn = NULL;
+             (dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
+                if (!device_is_compatible(dn,
+                                     "IBM,CBEA-Internal-Interrupt-Controller"))
+                        continue;
+                np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges",
+                                         NULL);
+                if (np == NULL) {
+                        printk(KERN_WARNING "IIC: CPU association not found\n");
+                        of_node_put(dn);
+                        return -ENODEV;
+                }
+                if (of_address_to_resource(dn, 0, &r0) ||
+                    of_address_to_resource(dn, 1, &r1)) {
+                        printk(KERN_WARNING "IIC: Can't resolve addresses\n");
+                        of_node_put(dn);
+                        return -ENODEV;
                 }
+                host = NULL;
+                if (found < IIC_NODE_COUNT) {
+                        host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+                                              IIC_SOURCE_COUNT,
+                                              &iic_host_ops,
+                                              IIC_IRQ_INVALID);
+                        iic_hosts[found] = host;
+                        BUG_ON(iic_hosts[found] == NULL);
+                        iic_hosts[found]->host_data = of_node_get(dn);
+                        found++;
+                }
+                init_one_iic(np[0], r0.start, host);
+                init_one_iic(np[1], r1.start, host);
         }
+
+        if (found)
+                return 0;
+        else
+                return -ENODEV;
 }
 
-void iic_init_IRQ(void)
+void __init iic_init_IRQ(void)
 {
-        int cpu, irq_offset;
-        struct iic *iic;
-
+        /* Discover and initialize iics */
         if (setup_iic() < 0)
-                setup_iic_hardcoded();
+                panic("IIC: Failed to initialize !\n");
 
-        irq_offset = 0;
-        for_each_possible_cpu(cpu) {
-                iic = &per_cpu(iic, cpu);
-                if (iic->regs)
-                        out_be64(&iic->regs->prio, 0xff);
-        }
-        iic_setup_spe_handlers();
+        /* Set master interrupt handling function */
+        ppc_md.get_irq = iic_get_irq;
+
+        /* Enable on current CPU */
+        iic_setup_cpu();
 }
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 799f77d98f96..5560a92ec3ab 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -37,27 +37,24 @@
  */
 
 enum {
-        IIC_EXT_OFFSET   = 0x00, /* Start of south bridge IRQs */
-        IIC_NUM_EXT      = 0x40, /* Number of south bridge IRQs */
-        IIC_SPE_OFFSET   = 0x40, /* Start of SPE interrupts */
-        IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class    */
-        IIC_IPI_OFFSET   = 0x70, /* Start of IPI IRQs */
-        IIC_NUM_IPIS     = 0x10, /* IRQs reserved for IPI */
-        IIC_NODE_STRIDE  = 0x80, /* Total IRQs per node   */
+        IIC_IRQ_INVALID         = 0xff,
+        IIC_IRQ_MAX             = 0x3f,
+        IIC_IRQ_EXT_IOIF0       = 0x20,
+        IIC_IRQ_EXT_IOIF1       = 0x2b,
+        IIC_IRQ_IPI0            = 0x40,
+        IIC_NUM_IPIS            = 0x10, /* IRQs reserved for IPI */
+        IIC_SOURCE_COUNT        = 0x50,
 };
 
 extern void iic_init_IRQ(void);
-extern int  iic_get_irq(struct pt_regs *regs);
 extern void iic_cause_IPI(int cpu, int mesg);
 extern void iic_request_IPIs(void);
 extern void iic_setup_cpu(void);
-extern void iic_local_enable(void);
-extern void iic_local_disable(void);
 
 extern u8 iic_get_target_id(int cpu);
+extern struct irq_host *iic_get_irq_host(int node);
 
 extern void spider_init_IRQ(void);
-extern int spider_get_irq(int node);
 
 #endif
 #endif /* ASM_CELL_PIC_H */
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index d8c2a29b3c15..282987d6d4a2 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -49,6 +49,7 @@
 #include <asm/irq.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
+#include <asm/udbg.h>
 
 #include "interrupt.h"
 #include "iommu.h"
@@ -79,10 +80,22 @@ static void cell_progress(char *s, unsigned short hex)
         printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
+static void __init cell_pcibios_fixup(void)
+{
+        struct pci_dev *dev = NULL;
+
+        for_each_pci_dev(dev)
+                pci_read_irq_line(dev);
+}
+
+static void __init cell_init_irq(void)
+{
+        iic_init_IRQ();
+        spider_init_IRQ();
+}
+
 static void __init cell_setup_arch(void)
 {
-        ppc_md.init_IRQ       = iic_init_IRQ;
-        ppc_md.get_irq        = iic_get_irq;
 #ifdef CONFIG_SPU_BASE
         spu_priv1_ops         = &spu_priv1_mmio_ops;
 #endif
@@ -108,7 +121,6 @@ static void __init cell_setup_arch(void)
         /* Find and initialize PCI host bridges */
         init_pci_config_tokens();
         find_and_init_phbs();
-        spider_init_IRQ();
         cbe_pervasive_init();
 #ifdef CONFIG_DUMMY_CONSOLE
         conswitchp = &dummy_con;
@@ -126,8 +138,6 @@ static void __init cell_init_early(void)
 
         cell_init_iommu();
 
-        ppc64_interrupt_controller = IC_CELL_PIC;
-
         DBG(" <- cell_init_early()\n");
 }
 
@@ -173,6 +183,8 @@ define_machine(cell) {
         .calibrate_decr         = generic_calibrate_decr,
         .check_legacy_ioport    = cell_check_legacy_ioport,
         .progress               = cell_progress,
+        .init_IRQ               = cell_init_irq,
+        .pcibios_fixup          = cell_pcibios_fixup,
 #ifdef CONFIG_KEXEC
         .machine_kexec          = default_machine_kexec,
         .machine_kexec_prepare  = default_machine_kexec_prepare,
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 7c3a0b6d34fd..ae7ef88f1a37 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -22,6 +22,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/ioport.h>
 
 #include <asm/pgtable.h>
 #include <asm/prom.h>
@@ -56,184 +57,313 @@ enum {
         REISWAITEN      = 0x508, /* Reissue Wait Control*/
 };
 
-static void __iomem *spider_pics[4];
+#define SPIDER_CHIP_COUNT       4
+#define SPIDER_SRC_COUNT        64
+#define SPIDER_IRQ_INVALID      63
 
-static void __iomem *spider_get_pic(int irq)
-{
-        int node = irq / IIC_NODE_STRIDE;
-        irq %= IIC_NODE_STRIDE;
-
-        if (irq >= IIC_EXT_OFFSET &&
-            irq < IIC_EXT_OFFSET + IIC_NUM_EXT &&
-            spider_pics)
-                return spider_pics[node];
-        return NULL;
-}
+struct spider_pic {
+        struct irq_host         *host;
+        struct device_node      *of_node;
+        void __iomem            *regs;
+        unsigned int            node_id;
+};
+static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
 
-static int spider_get_nr(unsigned int irq)
+static struct spider_pic *spider_virq_to_pic(unsigned int virq)
 {
-        return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET;
+        return irq_map[virq].host->host_data;
 }
 
-static void __iomem *spider_get_irq_config(int irq)
+static void __iomem *spider_get_irq_config(struct spider_pic *pic,
+                                           unsigned int src)
 {
-        void __iomem *pic;
-        pic = spider_get_pic(irq);
-        return pic + TIR_CFGA + 8 * spider_get_nr(irq);
+        return pic->regs + TIR_CFGA + 8 * src;
 }
 
-static void spider_enable_irq(unsigned int irq)
+static void spider_unmask_irq(unsigned int virq)
 {
-        int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
-        void __iomem *cfg = spider_get_irq_config(irq);
-        irq = spider_get_nr(irq);
+        struct spider_pic *pic = spider_virq_to_pic(virq);
+        void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
 
-        out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
-        out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
+        /* We use no locking as we should be covered by the descriptor lock
+         * for access to invidual source configuration registers
+         */
+        out_be32(cfg, in_be32(cfg) | 0x30000000u);
 }
 
-static void spider_disable_irq(unsigned int irq)
+static void spider_mask_irq(unsigned int virq)
 {
-        void __iomem *cfg = spider_get_irq_config(irq);
-        irq = spider_get_nr(irq);
+        struct spider_pic *pic = spider_virq_to_pic(virq);
+        void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
 
+        /* We use no locking as we should be covered by the descriptor lock
+         * for access to invidual source configuration registers
+         */
         out_be32(cfg, in_be32(cfg) & ~0x30000000u);
 }
 
-static unsigned int spider_startup_irq(unsigned int irq)
+static void spider_ack_irq(unsigned int virq)
 {
-        spider_enable_irq(irq);
-        return 0;
-}
+        struct spider_pic *pic = spider_virq_to_pic(virq);
+        unsigned int src = irq_map[virq].hwirq;
 
-static void spider_shutdown_irq(unsigned int irq)
-{
-        spider_disable_irq(irq);
-}
+        /* Reset edge detection logic if necessary
+         */
+        if (get_irq_desc(virq)->status & IRQ_LEVEL)
+                return;
 
-static void spider_end_irq(unsigned int irq)
-{
-        spider_enable_irq(irq);
-}
+        /* Only interrupts 47 to 50 can be set to edge */
+        if (src < 47 || src > 50)
+                return;
 
-static void spider_ack_irq(unsigned int irq)
-{
-        spider_disable_irq(irq);
-        iic_local_enable();
+        /* Perform the clear of the edge logic */
+        out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
 }
 
-static struct hw_interrupt_type spider_pic = {
+static struct irq_chip spider_pic = {
         .typename = " SPIDER   ",
-        .startup = spider_startup_irq,
-        .shutdown = spider_shutdown_irq,
-        .enable = spider_enable_irq,
-        .disable = spider_disable_irq,
+        .unmask = spider_unmask_irq,
+        .mask = spider_mask_irq,
         .ack = spider_ack_irq,
-        .end = spider_end_irq,
 };
 
-int spider_get_irq(int node)
+static int spider_host_match(struct irq_host *h, struct device_node *node)
 {
-        unsigned long cs;
-        void __iomem *regs = spider_pics[node];
-
-        cs = in_be32(regs + TIR_CS) >> 24;
-
-        if (cs == 63)
-                return -1;
-        else
-                return cs;
+        struct spider_pic *pic = h->host_data;
+        return node == pic->of_node;
 }
 
-/* hardcoded part to be compatible with older firmware */
-
-void spider_init_IRQ_hardcoded(void)
+static int spider_host_map(struct irq_host *h, unsigned int virq,
+                        irq_hw_number_t hw, unsigned int flags)
 {
-        int node;
-        long spiderpic;
-        long pics[] = { 0x24000008000, 0x34000008000 };
-        int n;
-
-        pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
-
-        for (node = 0; node < num_present_cpus()/2; node++) {
-                spiderpic = pics[node];
-                printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
-                spider_pics[node] = ioremap(spiderpic, 0x800);
-                for (n = 0; n < IIC_NUM_EXT; n++) {
-                        int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
-                        get_irq_desc(irq)->chip = &spider_pic;
-                }
-
-                /* do not mask any interrupts because of level */
-                out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
-                /* disable edge detection clear */
-                /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
-                /* enable interrupt packets to be output */
-                out_be32(spider_pics[node] + TIR_PIEN,
-                        in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
-                /* Enable the interrupt detection enable bit. Do this last! */
-                out_be32(spider_pics[node] + TIR_DEN,
-                        in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+        unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+        struct spider_pic *pic = h->host_data;
+        void __iomem *cfg = spider_get_irq_config(pic, hw);
+        int level = 0;
+        u32 ic;
+
+        /* Note that only level high is supported for most interrupts */
+        if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH &&
+            (hw < 47 || hw > 50))
+                return -EINVAL;
+
+        /* Decode sense type */
+        switch(sense) {
+        case IRQ_TYPE_EDGE_RISING:
+                ic = 0x3;
+                break;
+        case IRQ_TYPE_EDGE_FALLING:
+                ic = 0x2;
+                break;
+        case IRQ_TYPE_LEVEL_LOW:
+                ic = 0x0;
+                level = 1;
+                break;
+        case IRQ_TYPE_LEVEL_HIGH:
+        case IRQ_TYPE_NONE:
+                ic = 0x1;
+                level = 1;
+                break;
+        default:
+                return -EINVAL;
         }
-}
 
-void spider_init_IRQ(void)
-{
-        long spider_reg;
-        struct device_node *dn;
-        char *compatible;
-        int n, node = 0;
+        /* Configure the source. One gross hack that was there before and
+         * that I've kept around is the priority to the BE which I set to
+         * be the same as the interrupt source number. I don't know wether
+         * that's supposed to make any kind of sense however, we'll have to
+         * decide that, but for now, I'm not changing the behaviour.
+         */
+        out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe);
+        out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
+
+        if (level)
+                get_irq_desc(virq)->status |= IRQ_LEVEL;
+        set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
+        return 0;
+}
 
-        for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
-                compatible = (char *)get_property(dn, "compatible", NULL);
+static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
+                           u32 *intspec, unsigned int intsize,
+                           irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
-                if (!compatible)
-                        continue;
+{
+        /* Spider interrupts have 2 cells, first is the interrupt source,
+         * second, well, I don't know for sure yet ... We mask the top bits
+         * because old device-trees encode a node number in there
+         */
+        *out_hwirq = intspec[0] & 0x3f;
+        *out_flags = IRQ_TYPE_LEVEL_HIGH;
+        return 0;
+}
 
-                if (strstr(compatible, "CBEA,platform-spider-pic"))
-                        spider_reg = *(long *)get_property(dn,"reg", NULL);
-                else if (strstr(compatible, "sti,platform-spider-pic")) {
-                        spider_init_IRQ_hardcoded();
-                        return;
-                } else
-                        continue;
+static struct irq_host_ops spider_host_ops = {
+        .match = spider_host_match,
+        .map = spider_host_map,
+        .xlate = spider_host_xlate,
+};
 
-                if (!spider_reg)
-                        printk("interrupt controller does not have reg property !\n");
+static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc,
+                               struct pt_regs *regs)
+{
+        struct spider_pic *pic = desc->handler_data;
+        unsigned int cs, virq;
 
-                n = prom_n_addr_cells(dn);
+        cs = in_be32(pic->regs + TIR_CS) >> 24;
+        if (cs == SPIDER_IRQ_INVALID)
+                virq = NO_IRQ;
+        else
+                virq = irq_linear_revmap(pic->host, cs);
+        if (virq != NO_IRQ)
+                generic_handle_irq(virq, regs);
+        desc->chip->eoi(irq);
+}
 
-                if ( n != 2)
-                        printk("reg property with invalid number of elements \n");
+/* For hooking up the cascace we have a problem. Our device-tree is
+ * crap and we don't know on which BE iic interrupt we are hooked on at
+ * least not the "standard" way. We can reconstitute it based on two
+ * informations though: which BE node we are connected to and wether
+ * we are connected to IOIF0 or IOIF1. Right now, we really only care
+ * about the IBM cell blade and we know that its firmware gives us an
+ * interrupt-map property which is pretty strange.
+ */
+static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
+{
+        unsigned int virq;
+        u32 *imap, *tmp;
+        int imaplen, intsize, unit;
+        struct device_node *iic;
+        struct irq_host *iic_host;
+
+#if 0 /* Enable that when we have a way to retreive the node as well */
+        /* First, we check wether we have a real "interrupts" in the device
+         * tree in case the device-tree is ever fixed
+         */
+        struct of_irq oirq;
+        if (of_irq_map_one(pic->of_node, 0, &oirq) == 0) {
+                virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+                                             oirq.size);
+                goto bail;
+        }
+#endif
+
+        /* Now do the horrible hacks */
+        tmp = (u32 *)get_property(pic->of_node, "#interrupt-cells", NULL);
+        if (tmp == NULL)
+                return NO_IRQ;
+        intsize = *tmp;
+        imap = (u32 *)get_property(pic->of_node, "interrupt-map", &imaplen);
+        if (imap == NULL || imaplen < (intsize + 1))
+                return NO_IRQ;
+        iic = of_find_node_by_phandle(imap[intsize]);
+        if (iic == NULL)
+                return NO_IRQ;
+        imap += intsize + 1;
+        tmp = (u32 *)get_property(iic, "#interrupt-cells", NULL);
+        if (tmp == NULL)
+                return NO_IRQ;
+        intsize = *tmp;
+        /* Assume unit is last entry of interrupt specifier */
+        unit = imap[intsize - 1];
+        /* Ok, we have a unit, now let's try to get the node */
+        tmp = (u32 *)get_property(iic, "ibm,interrupt-server-ranges", NULL);
+        if (tmp == NULL) {
+                of_node_put(iic);
+                return NO_IRQ;
+        }
+        /* ugly as hell but works for now */
+        pic->node_id = (*tmp) >> 1;
+        of_node_put(iic);
+
+        /* Ok, now let's get cracking. You may ask me why I just didn't match
+         * the iic host from the iic OF node, but that way I'm still compatible
+         * with really really old old firmwares for which we don't have a node
+         */
+        iic_host = iic_get_irq_host(pic->node_id);
+        if (iic_host == NULL)
+                return NO_IRQ;
+        /* Manufacture an IIC interrupt number of class 2 */
+        virq = irq_create_mapping(iic_host, 0x20 | unit, 0);
+        if (virq == NO_IRQ)
+                printk(KERN_ERR "spider_pic: failed to map cascade !");
+        return virq;
+}
 
-                spider_pics[node] = ioremap(spider_reg, 0x800);
 
-                printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
-                       spider_reg, n, spider_pics[node]);
+static void __init spider_init_one(struct device_node *of_node, int chip,
+                                   unsigned long addr)
+{
+        struct spider_pic *pic = &spider_pics[chip];
+        int i, virq;
+
+        /* Map registers */
+        pic->regs = ioremap(addr, 0x1000);
+        if (pic->regs == NULL)
+                panic("spider_pic: can't map registers !");
+
+        /* Allocate a host */
+        pic->host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, SPIDER_SRC_COUNT,
+                                   &spider_host_ops, SPIDER_IRQ_INVALID);
+        if (pic->host == NULL)
+                panic("spider_pic: can't allocate irq host !");
+        pic->host->host_data = pic;
+
+        /* Fill out other bits */
+        pic->of_node = of_node_get(of_node);
+
+        /* Go through all sources and disable them */
+        for (i = 0; i < SPIDER_SRC_COUNT; i++) {
+                void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i;
+                out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+        }
 
-                for (n = 0; n < IIC_NUM_EXT; n++) {
-                        int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
-                        get_irq_desc(irq)->chip = &spider_pic;
-                }
+        /* do not mask any interrupts because of level */
+        out_be32(pic->regs + TIR_MSK, 0x0);
 
-                /* do not mask any interrupts because of level */
-                out_be32(spider_pics[node] + TIR_MSK, 0x0);
+        /* enable interrupt packets to be output */
+        out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1);
 
-                /* disable edge detection clear */
-                /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+        /* Hook up the cascade interrupt to the iic and nodeid */
+        virq = spider_find_cascade_and_node(pic);
+        if (virq == NO_IRQ)
+                return;
+        set_irq_data(virq, pic);
+        set_irq_chained_handler(virq, spider_irq_cascade);
 
-                /* enable interrupt packets to be output */
-                out_be32(spider_pics[node] + TIR_PIEN,
-                        in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+        printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n",
+               pic->node_id, addr, of_node->full_name);
 
-                /* Enable the interrupt detection enable bit. Do this last! */
-                out_be32(spider_pics[node] + TIR_DEN,
-                        in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+        /* Enable the interrupt detection enable bit. Do this last! */
+        out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1);
+}
 
-                node++;
+void __init spider_init_IRQ(void)
+{
+        struct resource r;
+        struct device_node *dn;
+        int chip = 0;
+
+        /* XXX node numbers are totally bogus. We _hope_ we get the device
+         * nodes in the right order here but that's definitely not guaranteed,
+         * we need to get the node from the device tree instead.
+         * There is currently no proper property for it (but our whole
+         * device-tree is bogus anyway) so all we can do is pray or maybe test
+         * the address and deduce the node-id
+         */
+        for (dn = NULL;
+             (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+                if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
+                        if (of_address_to_resource(dn, 0, &r)) {
+                                printk(KERN_WARNING "spider-pic: Failed\n");
+                                continue;
+                        }
+                } else if (device_is_compatible(dn, "sti,platform-spider-pic")
+                           && (chip < 2)) {
+                        static long hard_coded_pics[] =
+                                { 0x24000008000, 0x34000008000 };
+                        r.start = hard_coded_pics[chip];
+                } else
+                        continue;
+                spider_init_one(dn, chip++, r.start);
         }
 }
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 656c1ef5f4ad..5d2313a6c82b 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -264,51 +264,57 @@ spu_irq_class_2(int irq, void *data, struct pt_regs *regs)
         return stat ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int
-spu_request_irqs(struct spu *spu)
+static int spu_request_irqs(struct spu *spu)
 {
-        int ret;
-        int irq_base;
-
-        irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
-
-        snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
-        ret = request_irq(irq_base + spu->isrc,
-                 spu_irq_class_0, IRQF_DISABLED, spu->irq_c0, spu);
-        if (ret)
-                goto out;
-
-        snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
-        ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
-                 spu_irq_class_1, IRQF_DISABLED, spu->irq_c1, spu);
-        if (ret)
-                goto out1;
+        int ret = 0;
 
-        snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
-        ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
-                 spu_irq_class_2, IRQF_DISABLED, spu->irq_c2, spu);
-        if (ret)
-                goto out2;
-        goto out;
+        if (spu->irqs[0] != NO_IRQ) {
+                snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
+                         spu->number);
+                ret = request_irq(spu->irqs[0], spu_irq_class_0,
+                                  IRQF_DISABLED,
+                                  spu->irq_c0, spu);
+                if (ret)
+                        goto bail0;
+        }
+        if (spu->irqs[1] != NO_IRQ) {
+                snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
+                         spu->number);
+                ret = request_irq(spu->irqs[1], spu_irq_class_1,
+                                  IRQF_DISABLED,
+                                  spu->irq_c1, spu);
+                if (ret)
+                        goto bail1;
+        }
+        if (spu->irqs[2] != NO_IRQ) {
+                snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
+                         spu->number);
+                ret = request_irq(spu->irqs[2], spu_irq_class_2,
+                                  IRQF_DISABLED,
+                                  spu->irq_c2, spu);
+                if (ret)
+                        goto bail2;
+        }
+        return 0;
 
-out2:
-        free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
-out1:
-        free_irq(irq_base + spu->isrc, spu);
-out:
+bail2:
+        if (spu->irqs[1] != NO_IRQ)
+                free_irq(spu->irqs[1], spu);
+bail1:
+        if (spu->irqs[0] != NO_IRQ)
+                free_irq(spu->irqs[0], spu);
+bail0:
         return ret;
 }
 
-static void
-spu_free_irqs(struct spu *spu)
+static void spu_free_irqs(struct spu *spu)
 {
-        int irq_base;
-
-        irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
-
-        free_irq(irq_base + spu->isrc, spu);
-        free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
-        free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu);
+        if (spu->irqs[0] != NO_IRQ)
+                free_irq(spu->irqs[0], spu);
+        if (spu->irqs[1] != NO_IRQ)
+                free_irq(spu->irqs[1], spu);
+        if (spu->irqs[2] != NO_IRQ)
+                free_irq(spu->irqs[2], spu);
 }
 
 static LIST_HEAD(spu_list);
@@ -559,17 +565,38 @@ static void spu_unmap(struct spu *spu)
         iounmap((u8 __iomem *)spu->local_store);
 }
 
+/* This function shall be abstracted for HV platforms */
+static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
+{
+        struct irq_host *host;
+        unsigned int isrc;
+        u32 *tmp;
+
+        host = iic_get_irq_host(spu->node);
+        if (host == NULL)
+                return -ENODEV;
+
+        /* Get the interrupt source from the device-tree */
+        tmp = (u32 *)get_property(np, "isrc", NULL);
+        if (!tmp)
+                return -ENODEV;
+        spu->isrc = isrc = tmp[0];
+
+        /* Now map interrupts of all 3 classes */
+        spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0);
+        spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0);
+        spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0);
+
+        /* Right now, we only fail if class 2 failed */
+        return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
+}
+
 static int __init spu_map_device(struct spu *spu, struct device_node *node)
 {
         char *prop;
         int ret;
 
         ret = -ENODEV;
-        prop = get_property(node, "isrc", NULL);
-        if (!prop)
-                goto out;
-        spu->isrc = *(unsigned int *)prop;
-
         spu->name = get_property(node, "name", NULL);
         if (!spu->name)
                 goto out;
@@ -636,7 +663,8 @@ static int spu_create_sysdev(struct spu *spu)
                 return ret;
         }
 
-        sysdev_create_file(&spu->sysdev, &attr_isrc);
+        if (spu->isrc != 0)
+                sysdev_create_file(&spu->sysdev, &attr_isrc);
         sysfs_add_device_to_node(&spu->sysdev, spu->nid);
 
         return 0;
@@ -668,6 +696,9 @@ static int __init create_spu(struct device_node *spe)
         spu->nid = of_node_to_nid(spe);
         if (spu->nid == -1)
                 spu->nid = 0;
+        ret = spu_map_interrupts(spu, spe);
+        if (ret)
+                goto out_unmap;
         spin_lock_init(&spu->register_lock);
         spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1));
         spu_mfc_sr1_set(spu, 0x33);
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 66c253498803..6802cdc3168a 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -18,7 +18,6 @@
 #include <asm/machdep.h>
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
 #include <asm/grackle.h>
 #include <asm/rtas.h>
 
@@ -161,15 +160,9 @@ void __init
 chrp_pcibios_fixup(void)
 {
         struct pci_dev *dev = NULL;
-        struct device_node *np;
 
-        /* PCI interrupts are controlled by the OpenPIC */
-        for_each_pci_dev(dev) {
-                np = pci_device_to_OF_node(dev);
-                if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
-                        dev->irq = np->intrs[0].line;
-                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-        }
+        for_each_pci_dev(dev)
+                pci_read_irq_line(dev);
 }
 
 #define PRG_CL_RESET_VALID 0x00010000
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1f1771b212b4..bb10171132fa 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -59,7 +59,7 @@ void rtas_indicator_progress(char *, unsigned short);
 int _chrp_type;
 EXPORT_SYMBOL(_chrp_type);
 
-struct mpic *chrp_mpic;
+static struct mpic *chrp_mpic;
 
 /* Used for doing CHRP event-scans */
 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
@@ -315,24 +315,32 @@ chrp_event_scan(unsigned long unused)
                   jiffies + event_scan_interval);
 }
 
+static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc,
+                              struct pt_regs *regs)
+{
+        unsigned int cascade_irq = i8259_irq(regs);
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq, regs);
+        desc->chip->eoi(irq);
+}
+
 /*
  * Finds the open-pic node and sets up the mpic driver.
  */
 static void __init chrp_find_openpic(void)
 {
         struct device_node *np, *root;
-        int len, i, j, irq_count;
+        int len, i, j;
         int isu_size, idu_size;
         unsigned int *iranges, *opprop = NULL;
         int oplen = 0;
         unsigned long opaddr;
         int na = 1;
-        unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
 
-        np = find_type_devices("open-pic");
+        np = of_find_node_by_type(NULL, "open-pic");
         if (np == NULL)
                 return;
-        root = find_path_device("/");
+        root = of_find_node_by_path("/");
         if (root) {
                 opprop = (unsigned int *) get_property
                         (root, "platform-open-pic", &oplen);
@@ -343,19 +351,15 @@ static void __init chrp_find_openpic(void)
                 oplen /= na * sizeof(unsigned int);
         } else {
                 struct resource r;
-                if (of_address_to_resource(np, 0, &r))
-                        return;
+                if (of_address_to_resource(np, 0, &r)) {
+                        goto bail;
+                }
                 opaddr = r.start;
                 oplen = 0;
         }
 
         printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
 
-        irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
-        prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
-        /* i8259 cascade is always positive level */
-        init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
-
         iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
         if (iranges == NULL)
                 len = 0;        /* non-distributed mpic */
@@ -382,15 +386,12 @@ static void __init chrp_find_openpic(void)
         if (len > 1)
                 isu_size = iranges[3];
 
-        chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
-                               isu_size, NUM_ISA_INTERRUPTS, irq_count,
-                               NR_IRQS - 4, init_senses, irq_count,
-                               " MPIC    ");
+        chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
+                               isu_size, 0, " MPIC    ");
         if (chrp_mpic == NULL) {
                 printk(KERN_ERR "Failed to allocate MPIC structure\n");
-                return;
+                goto bail;
         }
-
         j = na - 1;
         for (i = 1; i < len; ++i) {
                 iranges += 2;
@@ -402,7 +403,10 @@ static void __init chrp_find_openpic(void)
         }
 
         mpic_init(chrp_mpic);
-        mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+        ppc_md.get_irq = mpic_get_irq;
+ bail:
+        of_node_put(root);
+        of_node_put(np);
 }
 
 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
@@ -413,14 +417,34 @@ static struct irqaction xmon_irqaction = {
 };
 #endif
 
-void __init chrp_init_IRQ(void)
+static void __init chrp_find_8259(void)
 {
-        struct device_node *np;
+        struct device_node *np, *pic = NULL;
         unsigned long chrp_int_ack = 0;
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-        struct device_node *kbd;
-#endif
+        unsigned int cascade_irq;
+
+        /* Look for cascade */
+        for_each_node_by_type(np, "interrupt-controller")
+                if (device_is_compatible(np, "chrp,iic")) {
+                        pic = np;
+                        break;
+                }
+        /* Ok, 8259 wasn't found. We need to handle the case where
+         * we have a pegasos that claims to be chrp but doesn't have
+         * a proper interrupt tree
+         */
+        if (pic == NULL && chrp_mpic != NULL) {
+                printk(KERN_ERR "i8259: Not found in device-tree"
+                       " assuming no legacy interrupts\n");
+                return;
+        }
 
+        /* Look for intack. In a perfect world, we would look for it on
+         * the ISA bus that holds the 8259 but heh... Works that way. If
+         * we ever see a problem, we can try to re-use the pSeries code here.
+         * Also, Pegasos-type platforms don't have a proper node to start
+         * from anyway
+         */
         for (np = find_devices("pci"); np != NULL; np = np->next) {
                 unsigned int *addrp = (unsigned int *)
                         get_property(np, "8259-interrupt-acknowledge", NULL);
@@ -431,11 +455,29 @@ void __init chrp_init_IRQ(void)
                 break;
         }
         if (np == NULL)
-                printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+                printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+                       " address, polling\n");
+
+        i8259_init(pic, chrp_int_ack);
+        if (ppc_md.get_irq == NULL)
+                ppc_md.get_irq = i8259_irq;
+        if (chrp_mpic != NULL) {
+                cascade_irq = irq_of_parse_and_map(pic, 0);
+                if (cascade_irq == NO_IRQ)
+                        printk(KERN_ERR "i8259: failed to map cascade irq\n");
+                else
+                        set_irq_chained_handler(cascade_irq,
+                                                chrp_8259_cascade);
+        }
+}
 
+void __init chrp_init_IRQ(void)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+        struct device_node *kbd;
+#endif
         chrp_find_openpic();
-
-        i8259_init(chrp_int_ack, 0);
+        chrp_find_8259();
 
         if (_chrp_type == _CHRP_Pegasos)
                 ppc_md.get_irq        = i8259_irq;
@@ -520,10 +562,6 @@ static int __init chrp_probe(void)
         DMA_MODE_READ = 0x44;
         DMA_MODE_WRITE = 0x48;
         isa_io_base = CHRP_ISA_IO_BASE;         /* default value */
-        ppc_do_canonicalize_irqs = 1;
-
-        /* Assume we have an 8259... */
-        __irq_offset_value = NUM_ISA_INTERRUPTS;
 
         return 1;
 }
@@ -535,7 +573,6 @@ define_machine(chrp) {
         .init                   = chrp_init2,
         .show_cpuinfo           = chrp_show_cpuinfo,
         .init_IRQ               = chrp_init_IRQ,
-        .get_irq                = mpic_get_irq,
         .pcibios_fixup          = chrp_pcibios_fixup,
         .restart                = rtas_restart,
         .power_off              = rtas_power_off,
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index c298ca1ea680..1d2307e87c30 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -29,7 +29,6 @@
 #include <asm/smp.h>
 #include <asm/residual.h>
 #include <asm/time.h>
-#include <asm/open_pic.h>
 #include <asm/machdep.h>
 #include <asm/smp.h>
 #include <asm/mpic.h>
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index f70e820e7304..2275e64f3152 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -162,27 +162,6 @@ static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs)
                 printk(KERN_ERR "pci_event_handler: NULL event received\n");
 }
 
-/*
- * This is called by init_IRQ.  set in ppc_md.init_IRQ by iSeries_setup.c
- * It must be called before the bus walk.
- */
-void __init iSeries_init_IRQ(void)
-{
-        /* Register PCI event handler and open an event path */
-        int ret;
-
-        ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
-                        &pci_event_handler);
-        if (ret == 0) {
-                ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
-                if (ret != 0)
-                        printk(KERN_ERR "iseries_init_IRQ: open event path "
-                                        "failed with rc 0x%x\n", ret);
-        } else
-                printk(KERN_ERR "iseries_init_IRQ: register handler "
-                                "failed with rc 0x%x\n", ret);
-}
-
 #define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff)
 #define REAL_IRQ_TO_BUS(irq)    ((((irq) >> 6) & 0xff) + 1)
 #define REAL_IRQ_TO_IDSEL(irq)  ((((irq) >> 3) & 7) + 1)
@@ -196,7 +175,7 @@ static void iseries_enable_IRQ(unsigned int irq)
 {
         u32 bus, dev_id, function, mask;
         const u32 sub_bus = 0;
-        unsigned int rirq = virt_irq_to_real_map[irq];
+        unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
         /* The IRQ has already been locked by the caller */
         bus = REAL_IRQ_TO_BUS(rirq);
@@ -213,7 +192,7 @@ static unsigned int iseries_startup_IRQ(unsigned int irq)
 {
         u32 bus, dev_id, function, mask;
         const u32 sub_bus = 0;
-        unsigned int rirq = virt_irq_to_real_map[irq];
+        unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
         bus = REAL_IRQ_TO_BUS(rirq);
         function = REAL_IRQ_TO_FUNC(rirq);
@@ -254,7 +233,7 @@ static void iseries_shutdown_IRQ(unsigned int irq)
 {
         u32 bus, dev_id, function, mask;
         const u32 sub_bus = 0;
-        unsigned int rirq = virt_irq_to_real_map[irq];
+        unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
         /* irq should be locked by the caller */
         bus = REAL_IRQ_TO_BUS(rirq);
@@ -277,7 +256,7 @@ static void iseries_disable_IRQ(unsigned int irq)
 {
         u32 bus, dev_id, function, mask;
         const u32 sub_bus = 0;
-        unsigned int rirq = virt_irq_to_real_map[irq];
+        unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
         /* The IRQ has already been locked by the caller */
         bus = REAL_IRQ_TO_BUS(rirq);
@@ -291,19 +270,19 @@ static void iseries_disable_IRQ(unsigned int irq)
 
 static void iseries_end_IRQ(unsigned int irq)
 {
-        unsigned int rirq = virt_irq_to_real_map[irq];
+        unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
         HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
                 (REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
 }
 
-static hw_irq_controller iSeries_IRQ_handler = {
-        .typename = "iSeries irq controller",
-        .startup = iseries_startup_IRQ,
-        .shutdown = iseries_shutdown_IRQ,
-        .enable = iseries_enable_IRQ,
-        .disable = iseries_disable_IRQ,
-        .end = iseries_end_IRQ
+static struct irq_chip iseries_pic = {
+        .typename       = "iSeries irq controller",
+        .startup        = iseries_startup_IRQ,
+        .shutdown       = iseries_shutdown_IRQ,
+        .unmask         = iseries_enable_IRQ,
+        .mask           = iseries_disable_IRQ,
+        .eoi            = iseries_end_IRQ
 };
 
 /*
@@ -314,17 +293,14 @@ static hw_irq_controller iSeries_IRQ_handler = {
 int __init iSeries_allocate_IRQ(HvBusNumber bus,
                 HvSubBusNumber sub_bus, u32 bsubbus)
 {
-        int virtirq;
         unsigned int realirq;
         u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus);
         u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus);
 
         realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
                 + function;
-        virtirq = virt_irq_create_mapping(realirq);
 
-        irq_desc[virtirq].chip = &iSeries_IRQ_handler;
-        return virtirq;
+        return irq_create_mapping(NULL, realirq, IRQ_TYPE_NONE);
 }
 
 #endif /* CONFIG_PCI */
@@ -332,10 +308,9 @@ int __init iSeries_allocate_IRQ(HvBusNumber bus,
 /*
  * Get the next pending IRQ.
  */
-int iSeries_get_irq(struct pt_regs *regs)
+unsigned int iSeries_get_irq(struct pt_regs *regs)
 {
-        /* -2 means ignore this interrupt */
-        int irq = -2;
+        int irq = NO_IRQ_IGNORE;
 
 #ifdef CONFIG_SMP
         if (get_lppaca()->int_dword.fields.ipi_cnt) {
@@ -358,9 +333,57 @@ int iSeries_get_irq(struct pt_regs *regs)
                 }
                 spin_unlock(&pending_irqs_lock);
                 if (irq >= NR_IRQS)
-                        irq = -2;
+                        irq = NO_IRQ_IGNORE;
         }
 #endif
 
         return irq;
 }
+
+static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
+                                irq_hw_number_t hw, unsigned int flags)
+{
+        set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
+
+        return 0;
+}
+
+static struct irq_host_ops iseries_irq_host_ops = {
+        .map = iseries_irq_host_map,
+};
+
+/*
+ * This is called by init_IRQ.  set in ppc_md.init_IRQ by iSeries_setup.c
+ * It must be called before the bus walk.
+ */
+void __init iSeries_init_IRQ(void)
+{
+        /* Register PCI event handler and open an event path */
+        struct irq_host *host;
+        int ret;
+
+        /*
+         * The Hypervisor only allows us up to 256 interrupt
+         * sources (the irq number is passed in a u8).
+         */
+        irq_set_virq_count(256);
+
+        /* Create irq host. No need for a revmap since HV will give us
+         * back our virtual irq number
+         */
+        host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &iseries_irq_host_ops, 0);
+        BUG_ON(host == NULL);
+        irq_set_default_host(host);
+
+        ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+                        &pci_event_handler);
+        if (ret == 0) {
+                ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+                if (ret != 0)
+                        printk(KERN_ERR "iseries_init_IRQ: open event path "
+                                        "failed with rc 0x%x\n", ret);
+        } else
+                printk(KERN_ERR "iseries_init_IRQ: register handler "
+                                "failed with rc 0x%x\n", ret);
+}
+
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
index 188aa808abd7..1ee8985140e5 100644
--- a/arch/powerpc/platforms/iseries/irq.h
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -4,6 +4,6 @@
 extern void iSeries_init_IRQ(void);
 extern int  iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32);
 extern void iSeries_activate_IRQs(void);
-extern int iSeries_get_irq(struct pt_regs *);
+extern unsigned int iSeries_get_irq(struct pt_regs *);
 
 #endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index c877074745b2..c9605d773a77 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -294,8 +294,6 @@ static void __init iSeries_init_early(void)
 {
         DBG(" -> iSeries_init_early()\n");
 
-        ppc64_interrupt_controller = IC_ISERIES;
-
 #if defined(CONFIG_BLK_DEV_INITRD)
         /*
          * If the init RAM disk has been configured and there is
@@ -659,12 +657,6 @@ static int __init iseries_probe(void)
         powerpc_firmware_features |= FW_FEATURE_ISERIES;
         powerpc_firmware_features |= FW_FEATURE_LPAR;
 
-        /*
-         * The Hypervisor only allows us up to 256 interrupt
-         * sources (the irq number is passed in a u8).
-         */
-        virt_irq_max = 255;
-
         hpte_init_iSeries();
 
         return 1;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index f7170ff86dab..63a1670d3bfd 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -443,18 +443,23 @@ void __init maple_pci_init(void)
 int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 {
         struct device_node *np;
-        int irq = channel ? 15 : 14;
+        unsigned int defirq = channel ? 15 : 14;
+        unsigned int irq;
 
         if (pdev->vendor != PCI_VENDOR_ID_AMD ||
             pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
-                return irq;
+                return defirq;
 
         np = pci_device_to_OF_node(pdev);
         if (np == NULL)
-                return irq;
-        if (np->n_intrs < 2)
-                return irq;
-        return np->intrs[channel & 0x1].line;
+                return defirq;
+        irq = irq_of_parse_and_map(np, channel & 0x1);
+        if (irq == NO_IRQ) {
+                printk("Failed to map onboard IDE interrupt for channel %d\n",
+                       channel);
+                return defirq;
+        }
+        return irq;
 }
 
 /* XXX: To remove once all firmwares are ok */
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 5cf90c28b141..cb528c9de4c3 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -11,7 +11,7 @@
  *
  */
 
-#define DEBUG
+#undef DEBUG
 
 #include <linux/init.h>
 #include <linux/errno.h>
@@ -198,50 +198,81 @@ static void __init maple_init_early(void)
 {
         DBG(" -> maple_init_early\n");
 
-        /* Setup interrupt mapping options */
-        ppc64_interrupt_controller = IC_OPEN_PIC;
-
         iommu_init_early_dart();
 
         DBG(" <- maple_init_early\n");
 }
 
-
-static __init void maple_init_IRQ(void)
+/*
+ * This is almost identical to pSeries and CHRP. We need to make that
+ * code generic at one point, with appropriate bits in the device-tree to
+ * identify the presence of an HT APIC
+ */
+static void __init maple_init_IRQ(void)
 {
-        struct device_node *root;
+        struct device_node *root, *np, *mpic_node = NULL;
         unsigned int *opprop;
-        unsigned long opic_addr;
+        unsigned long openpic_addr = 0;
+        int naddr, n, i, opplen, has_isus = 0;
         struct mpic *mpic;
-        unsigned char senses[128];
-        int n;
+        unsigned int flags = MPIC_PRIMARY;
 
-        DBG(" -> maple_init_IRQ\n");
+        /* Locate MPIC in the device-tree. Note that there is a bug
+         * in Maple device-tree where the type of the controller is
+         * open-pic and not interrupt-controller
+         */
+        for_each_node_by_type(np, "open-pic") {
+                mpic_node = np;
+                break;
+        }
+        if (mpic_node == NULL) {
+                printk(KERN_ERR
+                       "Failed to locate the MPIC interrupt controller\n");
+                return;
+        }
 
-        /* XXX: Non standard, replace that with a proper openpic/mpic node
-         * in the device-tree. Find the Open PIC if present */
+        /* Find address list in /platform-open-pic */
         root = of_find_node_by_path("/");
-        opprop = (unsigned int *) get_property(root,
-                                "platform-open-pic", NULL);
-        if (opprop == 0)
-                panic("OpenPIC not found !\n");
-
-        n = prom_n_addr_cells(root);
-        for (opic_addr = 0; n > 0; --n)
-                opic_addr = (opic_addr << 32) + *opprop++;
+        naddr = prom_n_addr_cells(root);
+        opprop = (unsigned int *) get_property(root, "platform-open-pic",
+                                               &opplen);
+        if (opprop != 0) {
+                openpic_addr = of_read_number(opprop, naddr);
+                has_isus = (opplen > naddr);
+                printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
+                       openpic_addr, has_isus);
+        }
         of_node_put(root);
 
-        /* Obtain sense values from device-tree */
-        prom_get_irq_senses(senses, 0, 128);
+        BUG_ON(openpic_addr == 0);
+
+        /* Check for a big endian MPIC */
+        if (get_property(np, "big-endian", NULL) != NULL)
+                flags |= MPIC_BIG_ENDIAN;
 
-        mpic = mpic_alloc(opic_addr,
-                          MPIC_PRIMARY | MPIC_BIG_ENDIAN |
-                          MPIC_BROKEN_U3 | MPIC_WANTS_RESET,
-                          0, 0, 128, 128, senses, 128, "U3-MPIC");
+        /* XXX Maple specific bits */
+        flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
+
+        /* Setup the openpic driver. More device-tree junks, we hard code no
+         * ISUs for now. I'll have to revisit some stuffs with the folks doing
+         * the firmware for those
+         */
+        mpic = mpic_alloc(mpic_node, openpic_addr, flags,
+                          /*has_isus ? 16 :*/ 0, 0, " MPIC     ");
         BUG_ON(mpic == NULL);
-        mpic_init(mpic);
 
-        DBG(" <- maple_init_IRQ\n");
+        /* Add ISUs */
+        opplen /= sizeof(u32);
+        for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+                unsigned long isuaddr = of_read_number(opprop + i, naddr);
+                mpic_assign_isu(mpic, n, isuaddr);
+        }
+
+        /* All ISUs are setup, complete initialization */
+        mpic_init(mpic);
+        ppc_md.get_irq = mpic_get_irq;
+        of_node_put(mpic_node);
+        of_node_put(root);
 }
 
 static void __init maple_progress(char *s, unsigned short hex)
@@ -256,7 +287,9 @@ static void __init maple_progress(char *s, unsigned short hex)
 static int __init maple_probe(void)
 {
         unsigned long root = of_get_flat_dt_root();
-        if (!of_flat_dt_is_compatible(root, "Momentum,Maple"))
+
+        if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
+            !of_flat_dt_is_compatible(root, "Momentum,Apache"))
                 return 0;
         /*
          * On U3, the DART (iommu) must be allocated now since it
@@ -277,7 +310,6 @@ define_machine(maple_md) {
         .setup_arch             = maple_setup_arch,
         .init_early             = maple_init_early,
         .init_IRQ               = maple_init_IRQ,
-        .get_irq                = mpic_get_irq,
         .pcibios_fixup          = maple_pcibios_fixup,
         .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
         .restart                = maple_restart,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index cb257aeb91f6..e63d52f227ee 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -162,6 +162,8 @@ static void __init bootx_add_chosen_props(unsigned long base,
 {
         u32 val;
 
+        bootx_dt_add_prop("linux,bootx", NULL, 0, mem_end);
+
         if (bootx_info->kernelParamsOffset) {
                 char *args = (char *)((unsigned long)bootx_info) +
                         bootx_info->kernelParamsOffset;
@@ -181,8 +183,25 @@ static void __init bootx_add_chosen_props(unsigned long base,
 static void __init bootx_add_display_props(unsigned long base,
                                            unsigned long *mem_end)
 {
+        boot_infos_t *bi = bootx_info;
+        u32 tmp;
+
         bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end);
         bootx_dt_add_prop("linux,opened", NULL, 0, mem_end);
+        tmp = bi->dispDeviceDepth;
+        bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end);
+        tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0];
+        bootx_dt_add_prop("linux,bootx-width", &tmp, 4, mem_end);
+        tmp = bi->dispDeviceRect[3] - bi->dispDeviceRect[1];
+        bootx_dt_add_prop("linux,bootx-height", &tmp, 4, mem_end);
+        tmp = bi->dispDeviceRowBytes;
+        bootx_dt_add_prop("linux,bootx-linebytes", &tmp, 4, mem_end);
+        tmp = (u32)bi->dispDeviceBase;
+        if (tmp == 0)
+                tmp = (u32)bi->logicalDisplayBase;
+        tmp += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
+        tmp += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8);
+        bootx_dt_add_prop("linux,bootx-addr", &tmp, 4, mem_end);
 }
 
 static void __init bootx_dt_add_string(char *s, unsigned long *mem_end)
@@ -211,7 +230,7 @@ static void __init bootx_scan_dt_build_strings(unsigned long base,
 
         if (!strcmp(namep, "/chosen")) {
                 DBG(" detected /chosen ! adding properties names !\n");
-                bootx_dt_add_string("linux,platform", mem_end);
+                bootx_dt_add_string("linux,bootx", mem_end);
                 bootx_dt_add_string("linux,stdout-path", mem_end);
                 bootx_dt_add_string("linux,initrd-start", mem_end);
                 bootx_dt_add_string("linux,initrd-end", mem_end);
@@ -222,6 +241,11 @@ static void __init bootx_scan_dt_build_strings(unsigned long base,
                 DBG(" detected display ! adding properties names !\n");
                 bootx_dt_add_string("linux,boot-display", mem_end);
                 bootx_dt_add_string("linux,opened", mem_end);
+                bootx_dt_add_string("linux,bootx-depth", mem_end);
+                bootx_dt_add_string("linux,bootx-width", mem_end);
+                bootx_dt_add_string("linux,bootx-height", mem_end);
+                bootx_dt_add_string("linux,bootx-linebytes", mem_end);
+                bootx_dt_add_string("linux,bootx-addr", mem_end);
                 strncpy(bootx_disp_path, namep, 255);
         }
 
@@ -443,7 +467,14 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
         if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
                 bi->logicalDisplayBase = bi->dispDeviceBase;
 
+        /* Fixup depth 16 -> 15 as that's what MacOS calls 16bpp */
+        if (bi->dispDeviceDepth == 16)
+                bi->dispDeviceDepth = 15;
+
 #ifdef CONFIG_BOOTX_TEXT
+        ptr = (unsigned long)bi->logicalDisplayBase;
+        ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
+        ptr += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8);
         btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0],
                             bi->dispDeviceRect[3] - bi->dispDeviceRect[1],
                             bi->dispDeviceDepth, bi->dispDeviceRowBytes,
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index ceafaf52a668..8677f50c2586 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -522,10 +522,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
                 host->speed = KW_I2C_MODE_25KHZ;
                 break;
         }       
-        if (np->n_intrs > 0)
-                host->irq = np->intrs[0].line;
-        else
-                host->irq = NO_IRQ;
+        host->irq = irq_of_parse_and_map(np, 0);
+        if (host->irq == NO_IRQ)
+                printk(KERN_WARNING
+                       "low_i2c: Failed to map interrupt for %s\n",
+                       np->full_name);
 
         host->base = ioremap((*addrp), 0x1000);
         if (host->base == NULL) {
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 41fa2409482a..6a36ea9bf673 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -29,6 +29,8 @@
 #include <asm/machdep.h>
 #include <asm/nvram.h>
 
+#include "pmac.h"
+
 #define DEBUG
 
 #ifdef DEBUG
@@ -80,9 +82,6 @@ static int nvram_partitions[3];
 // XXX Turn that into a sem
 static DEFINE_SPINLOCK(nv_lock);
 
-extern int pmac_newworld;
-extern int system_running;
-
 static int (*core99_write_bank)(int bank, u8* datas);
 static int (*core99_erase_bank)(int bank);
 
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index d524a915aa86..556b349797e8 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -46,6 +46,9 @@ static int has_uninorth;
 static struct pci_controller *u3_agp;
 static struct pci_controller *u4_pcie;
 static struct pci_controller *u3_ht;
+#define has_second_ohare 0
+#else
+static int has_second_ohare;
 #endif /* CONFIG_PPC64 */
 
 extern u8 pci_cache_line_size;
@@ -647,6 +650,33 @@ static void __init init_p2pbridge(void)
         early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
 }
 
+static void __init init_second_ohare(void)
+{
+        struct device_node *np = of_find_node_by_name(NULL, "pci106b,7");
+        unsigned char bus, devfn;
+        unsigned short cmd;
+
+        if (np == NULL)
+                return;
+
+        /* This must run before we initialize the PICs since the second
+         * ohare hosts a PIC that will be accessed there.
+         */
+        if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+                struct pci_controller* hose =
+                        pci_find_hose_for_OF_device(np);
+                if (!hose) {
+                        printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+                        return;
+                }
+                early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+                cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+                cmd &= ~PCI_COMMAND_IO;
+                early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+        }
+        has_second_ohare = 1;
+}
+
 /*
  * Some Apple desktop machines have a NEC PD720100A USB2 controller
  * on the motherboard. Open Firmware, on these, will disable the
@@ -688,9 +718,6 @@ static void __init fixup_nec_usb2(void)
                                " EHCI, fixing up...\n");
                         data &= ~1UL;
                         early_write_config_dword(hose, bus, devfn, 0xe4, data);
-                        early_write_config_byte(hose, bus,
-                                                devfn | 2, PCI_INTERRUPT_LINE,
-                                nec->intrs[0].line);
                 }
         }
 }
@@ -958,32 +985,28 @@ static int __init add_bridge(struct device_node *dev)
         return 0;
 }
 
-static void __init pcibios_fixup_OF_interrupts(void)
+void __init pmac_pcibios_fixup(void)
 {
         struct pci_dev* dev = NULL;
 
-        /*
-         * Open Firmware often doesn't initialize the
-         * PCI_INTERRUPT_LINE config register properly, so we
-         * should find the device node and apply the interrupt
-         * obtained from the OF device-tree
-         */
         for_each_pci_dev(dev) {
-                struct device_node *node;
-                node = pci_device_to_OF_node(dev);
-                /* this is the node, see if it has interrupts */
-                if (node && node->n_intrs > 0)
-                        dev->irq = node->intrs[0].line;
-                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+                /* Read interrupt from the device-tree */
+                pci_read_irq_line(dev);
+
+                /* Fixup interrupt for the modem/ethernet combo controller.
+                 * on machines with a second ohare chip.
+                 * The number in the device tree (27) is bogus (correct for
+                 * the ethernet-only board but not the combo ethernet/modem
+                 * board). The real interrupt is 28 on the second controller
+                 * -> 28+32 = 60.
+                 */
+                if (has_second_ohare &&
+                    dev->vendor == PCI_VENDOR_ID_DEC &&
+                    dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
+                        dev->irq = irq_create_mapping(NULL, 60, 0);
         }
 }
 
-void __init pmac_pcibios_fixup(void)
-{
-        /* Fixup interrupts according to OF tree */
-        pcibios_fixup_OF_interrupts();
-}
-
 #ifdef CONFIG_PPC64
 static void __init pmac_fixup_phb_resources(void)
 {
@@ -1071,6 +1094,7 @@ void __init pmac_pci_init(void)
 
 #else /* CONFIG_PPC64 */
         init_p2pbridge();
+        init_second_ohare();
         fixup_nec_usb2();
 
         /* We are still having some issues with the Xserve G4, enabling
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index d6eab8b3f7de..6d66359ec8c8 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -24,19 +24,18 @@ static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs)
 
 static int macio_do_gpio_irq_enable(struct pmf_function *func)
 {
-        if (func->node->n_intrs < 1)
+        unsigned int irq = irq_of_parse_and_map(func->node, 0);
+        if (irq == NO_IRQ)
                 return -EINVAL;
-
-        return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0,
-                           func->node->name, func);
+        return request_irq(irq, macio_gpio_irq, 0, func->node->name, func);
 }
 
 static int macio_do_gpio_irq_disable(struct pmf_function *func)
 {
-        if (func->node->n_intrs < 1)
+        unsigned int irq = irq_of_parse_and_map(func->node, 0);
+        if (irq == NO_IRQ)
                 return -EINVAL;
-
-        free_irq(func->node->intrs[0].line, func);
+        free_irq(irq, func);
         return 0;
 }
 
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index c9b09a9e6050..3d328bc1f7e0 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -65,39 +65,36 @@ static u32 level_mask[4];
 
 static DEFINE_SPINLOCK(pmac_pic_lock);
 
-#define GATWICK_IRQ_POOL_SIZE        10
-static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
-
 #define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
 static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static int pmac_irq_cascade = -1;
+static struct irq_host *pmac_pic_host;
 
-/*
- * Mark an irq as "lost".  This is only used on the pmac
- * since it can lose interrupts (see pmac_set_irq_mask).
- * -- Cort
- */
-void __set_lost(unsigned long irq_nr, int nokick)
+static void __pmac_retrigger(unsigned int irq_nr)
 {
-        if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+        if (irq_nr >= max_real_irqs && pmac_irq_cascade > 0) {
+                __set_bit(irq_nr, ppc_lost_interrupts);
+                irq_nr = pmac_irq_cascade;
+                mb();
+        }
+        if (!__test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
                 atomic_inc(&ppc_n_lost_interrupts);
-                if (!nokick)
-                        set_dec(1);
+                set_dec(1);
         }
 }
 
-static void pmac_mask_and_ack_irq(unsigned int irq_nr)
+static void pmac_mask_and_ack_irq(unsigned int virq)
 {
-        unsigned long bit = 1UL << (irq_nr & 0x1f);
-        int i = irq_nr >> 5;
+        unsigned int src = irq_map[virq].hwirq;
+        unsigned long bit = 1UL << (virq & 0x1f);
+        int i = virq >> 5;
         unsigned long flags;
 
-        if ((unsigned)irq_nr >= max_irqs)
-                return;
-
-        clear_bit(irq_nr, ppc_cached_irq_mask);
-        if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
-                atomic_dec(&ppc_n_lost_interrupts);
         spin_lock_irqsave(&pmac_pic_lock, flags);
+        __clear_bit(src, ppc_cached_irq_mask);
+        if (__test_and_clear_bit(src, ppc_lost_interrupts))
+                atomic_dec(&ppc_n_lost_interrupts);
         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
         out_le32(&pmac_irq_hw[i]->ack, bit);
         do {
@@ -109,16 +106,29 @@ static void pmac_mask_and_ack_irq(unsigned int irq_nr)
         spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+static void pmac_ack_irq(unsigned int virq)
+{
+        unsigned int src = irq_map[virq].hwirq;
+        unsigned long bit = 1UL << (src & 0x1f);
+        int i = src >> 5;
+        unsigned long flags;
+
+        spin_lock_irqsave(&pmac_pic_lock, flags);
+        if (__test_and_clear_bit(src, ppc_lost_interrupts))
+                atomic_dec(&ppc_n_lost_interrupts);
+        out_le32(&pmac_irq_hw[i]->ack, bit);
+        (void)in_le32(&pmac_irq_hw[i]->ack);
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
 {
         unsigned long bit = 1UL << (irq_nr & 0x1f);
         int i = irq_nr >> 5;
-        unsigned long flags;
 
         if ((unsigned)irq_nr >= max_irqs)
                 return;
 
-        spin_lock_irqsave(&pmac_pic_lock, flags);
         /* enable unmasked interrupts */
         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
 
@@ -135,71 +145,78 @@ static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
          * the bit in the flag register or request another interrupt.
          */
         if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
-                __set_lost((ulong)irq_nr, nokicklost);
-        spin_unlock_irqrestore(&pmac_pic_lock, flags);
+                __pmac_retrigger(irq_nr);
 }
 
 /* When an irq gets requested for the first client, if it's an
  * edge interrupt, we clear any previous one on the controller
  */
-static unsigned int pmac_startup_irq(unsigned int irq_nr)
+static unsigned int pmac_startup_irq(unsigned int virq)
 {
-        unsigned long bit = 1UL << (irq_nr & 0x1f);
-        int i = irq_nr >> 5;
+        unsigned long flags;
+        unsigned int src = irq_map[virq].hwirq;
+        unsigned long bit = 1UL << (src & 0x1f);
+        int i = src >> 5;
 
-        if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+        spin_lock_irqsave(&pmac_pic_lock, flags);
+        if ((irq_desc[virq].status & IRQ_LEVEL) == 0)
                 out_le32(&pmac_irq_hw[i]->ack, bit);
-        set_bit(irq_nr, ppc_cached_irq_mask);
-        pmac_set_irq_mask(irq_nr, 0);
+        __set_bit(src, ppc_cached_irq_mask);
+        __pmac_set_irq_mask(src, 0);
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
 
         return 0;
 }
 
-static void pmac_mask_irq(unsigned int irq_nr)
+static void pmac_mask_irq(unsigned int virq)
 {
-        clear_bit(irq_nr, ppc_cached_irq_mask);
-        pmac_set_irq_mask(irq_nr, 0);
-        mb();
+        unsigned long flags;
+        unsigned int src = irq_map[virq].hwirq;
+
+        spin_lock_irqsave(&pmac_pic_lock, flags);
+        __clear_bit(src, ppc_cached_irq_mask);
+        __pmac_set_irq_mask(src, 0);
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void pmac_unmask_irq(unsigned int irq_nr)
+static void pmac_unmask_irq(unsigned int virq)
 {
-        set_bit(irq_nr, ppc_cached_irq_mask);
-        pmac_set_irq_mask(irq_nr, 0);
+        unsigned long flags;
+        unsigned int src = irq_map[virq].hwirq;
+
+        spin_lock_irqsave(&pmac_pic_lock, flags);
+        __set_bit(src, ppc_cached_irq_mask);
+        __pmac_set_irq_mask(src, 0);
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void pmac_end_irq(unsigned int irq_nr)
+static int pmac_retrigger(unsigned int virq)
 {
-        if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-            && irq_desc[irq_nr].action) {
-                set_bit(irq_nr, ppc_cached_irq_mask);
-                pmac_set_irq_mask(irq_nr, 1);
-        }
-}
+        unsigned long flags;
 
+        spin_lock_irqsave(&pmac_pic_lock, flags);
+        __pmac_retrigger(irq_map[virq].hwirq);
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
+        return 1;
+}
 
-struct hw_interrupt_type pmac_pic = {
+static struct irq_chip pmac_pic = {
         .typename       = " PMAC-PIC ",
         .startup        = pmac_startup_irq,
-        .enable         = pmac_unmask_irq,
-        .disable        = pmac_mask_irq,
-        .ack            = pmac_mask_and_ack_irq,
-        .end            = pmac_end_irq,
-};
-
-struct hw_interrupt_type gatwick_pic = {
-        .typename       = " GATWICK  ",
-        .startup        = pmac_startup_irq,
-        .enable         = pmac_unmask_irq,
-        .disable        = pmac_mask_irq,
-        .ack            = pmac_mask_and_ack_irq,
-        .end            = pmac_end_irq,
+        .mask           = pmac_mask_irq,
+        .ack            = pmac_ack_irq,
+        .mask_ack       = pmac_mask_and_ack_irq,
+        .unmask         = pmac_unmask_irq,
+        .retrigger      = pmac_retrigger,
 };
 
 static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
 {
+        unsigned long flags;
         int irq, bits;
+        int rc = IRQ_NONE;
 
+        spin_lock_irqsave(&pmac_pic_lock, flags);
         for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
                 int i = irq >> 5;
                 bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -209,17 +226,20 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
                 if (bits == 0)
                         continue;
                 irq += __ilog2(bits);
+                spin_unlock_irqrestore(&pmac_pic_lock, flags);
                 __do_IRQ(irq, regs);
-                return IRQ_HANDLED;
+                spin_lock_irqsave(&pmac_pic_lock, flags);
+                rc = IRQ_HANDLED;
         }
-        printk("gatwick irq not from gatwick pic\n");
-        return IRQ_NONE;
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
+        return rc;
 }
 
-static int pmac_get_irq(struct pt_regs *regs)
+static unsigned int pmac_pic_get_irq(struct pt_regs *regs)
 {
         int irq;
         unsigned long bits = 0;
+        unsigned long flags;
 
 #ifdef CONFIG_SMP
         void psurge_smp_message_recv(struct pt_regs *);
@@ -227,9 +247,10 @@ static int pmac_get_irq(struct pt_regs *regs)
         /* IPI's are a hack on the powersurge -- Cort */
         if ( smp_processor_id() != 0 ) {
                 psurge_smp_message_recv(regs);
-                return -2;      /* ignore, already handled */
+                return NO_IRQ_IGNORE;   /* ignore, already handled */
         }
 #endif /* CONFIG_SMP */
+        spin_lock_irqsave(&pmac_pic_lock, flags);
         for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
                 int i = irq >> 5;
                 bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -241,133 +262,10 @@ static int pmac_get_irq(struct pt_regs *regs)
                 irq += __ilog2(bits);
                 break;
         }
-
-        return irq;
-}
-
-/* This routine will fix some missing interrupt values in the device tree
- * on the gatwick mac-io controller used by some PowerBooks
- *
- * Walking of OF nodes could use a bit more fixing up here, but it's not
- * very important as this is all boot time code on static portions of the
- * device-tree.
- *
- * However, the modifications done to "intrs" will have to be removed and
- * replaced with proper updates of the "interrupts" properties or
- * AAPL,interrupts, yet to be decided, once the dynamic parsing is there.
- */
-static void __init pmac_fix_gatwick_interrupts(struct device_node *gw,
-                                               int irq_base)
-{
-        struct device_node *node;
-        int count;
-
-        memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
-        count = 0;
-        for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) {
-                /* Fix SCC */
-                if ((strcasecmp(node->name, "escc") == 0) && node->child) {
-                        if (node->child->n_intrs < 3) {
-                                node->child->intrs = &gatwick_int_pool[count];
-                                count += 3;
-                        }
-                        node->child->n_intrs = 3;
-                        node->child->intrs[0].line = 15+irq_base;
-                        node->child->intrs[1].line =  4+irq_base;
-                        node->child->intrs[2].line =  5+irq_base;
-                        printk(KERN_INFO "irq: fixed SCC on gatwick"
-                               " (%d,%d,%d)\n",
-                               node->child->intrs[0].line,
-                               node->child->intrs[1].line,
-                               node->child->intrs[2].line);
-                }
-                /* Fix media-bay & left SWIM */
-                if (strcasecmp(node->name, "media-bay") == 0) {
-                        struct device_node* ya_node;
-
-                        if (node->n_intrs == 0)
-                                node->intrs = &gatwick_int_pool[count++];
-                        node->n_intrs = 1;
-                        node->intrs[0].line = 29+irq_base;
-                        printk(KERN_INFO "irq: fixed media-bay on gatwick"
-                               " (%d)\n", node->intrs[0].line);
-
-                        ya_node = node->child;
-                        while(ya_node) {
-                                if (strcasecmp(ya_node->name, "floppy") == 0) {
-                                        if (ya_node->n_intrs < 2) {
-                                                ya_node->intrs = &gatwick_int_pool[count];
-                                                count += 2;
-                                        }
-                                        ya_node->n_intrs = 2;
-                                        ya_node->intrs[0].line = 19+irq_base;
-                                        ya_node->intrs[1].line =  1+irq_base;
-                                        printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
-                                                ya_node->intrs[0].line, ya_node->intrs[1].line);
-                                }
-                                if (strcasecmp(ya_node->name, "ata4") == 0) {
-                                        if (ya_node->n_intrs < 2) {
-                                                ya_node->intrs = &gatwick_int_pool[count];
-                                                count += 2;
-                                        }
-                                        ya_node->n_intrs = 2;
-                                        ya_node->intrs[0].line = 14+irq_base;
-                                        ya_node->intrs[1].line =  3+irq_base;
-                                        printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
-                                                ya_node->intrs[0].line, ya_node->intrs[1].line);
-                                }
-                                ya_node = ya_node->sibling;
-                        }
-                }
-        }
-        if (count > 10) {
-                printk("WARNING !! Gatwick interrupt pool overflow\n");
-                printk("  GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
-                printk("              requested = %d\n", count);
-        }
-}
-
-/*
- * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
- * card which includes an ohare chip that acts as a second interrupt
- * controller.  If we find this second ohare, set it up and fix the
- * interrupt value in the device tree for the ethernet chip.
- */
-static void __init enable_second_ohare(struct device_node *np)
-{
-        unsigned char bus, devfn;
-        unsigned short cmd;
-        struct device_node *ether;
-
-        /* This code doesn't strictly belong here, it could be part of
-         * either the PCI initialisation or the feature code. It's kept
-         * here for historical reasons.
-         */
-        if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
-                struct pci_controller* hose =
-                        pci_find_hose_for_OF_device(np);
-                if (!hose) {
-                        printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
-                        return;
-                }
-                early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
-                cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-                cmd &= ~PCI_COMMAND_IO;
-                early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
-        }
-
-        /* Fix interrupt for the modem/ethernet combo controller. The number
-         * in the device tree (27) is bogus (correct for the ethernet-only
-         * board but not the combo ethernet/modem board).
-         * The real interrupt is 28 on the second controller -> 28+32 = 60.
-         */
-        ether = of_find_node_by_name(NULL, "pci1011,14");
-        if (ether && ether->n_intrs > 0) {
-                ether->intrs[0].line = 60;
-                printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
-                       ether->intrs[0].line);
-        }
-        of_node_put(ether);
+        spin_unlock_irqrestore(&pmac_pic_lock, flags);
+        if (unlikely(irq < 0))
+                return NO_IRQ;
+        return irq_linear_revmap(pmac_pic_host, irq);
 }
 
 #ifdef CONFIG_XMON
@@ -386,17 +284,60 @@ static struct irqaction gatwick_cascade_action = {
         .name           = "cascade",
 };
 
+static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+        /* We match all, we don't always have a node anyway */
+        return 1;
+}
+
+static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
+                             irq_hw_number_t hw, unsigned int flags)
+{
+        struct irq_desc *desc = get_irq_desc(virq);
+        int level;
+
+        if (hw >= max_irqs)
+                return -EINVAL;
+
+        /* Mark level interrupts, set delayed disable for edge ones and set
+         * handlers
+         */
+        level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
+        if (level)
+                desc->status |= IRQ_LEVEL;
+        else
+                desc->status |= IRQ_DELAYED_DISABLE;
+        set_irq_chip_and_handler(virq, &pmac_pic, level ?
+                                 handle_level_irq : handle_edge_irq);
+        return 0;
+}
+
+static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+                               u32 *intspec, unsigned int intsize,
+                               irq_hw_number_t *out_hwirq,
+                               unsigned int *out_flags)
+
+{
+        *out_hwirq = *intspec;
+        return 0;
+}
+
+static struct irq_host_ops pmac_pic_host_ops = {
+        .match = pmac_pic_host_match,
+        .map = pmac_pic_host_map,
+        .xlate = pmac_pic_host_xlate,
+};
+
 static void __init pmac_pic_probe_oldstyle(void)
 {
         int i;
-        int irq_cascade = -1;
         struct device_node *master = NULL;
         struct device_node *slave = NULL;
         u8 __iomem *addr;
         struct resource r;
 
         /* Set our get_irq function */
-        ppc_md.get_irq = pmac_get_irq;
+        ppc_md.get_irq = pmac_pic_get_irq;
 
         /*
          * Find the interrupt controller type & node
@@ -414,7 +355,6 @@ static void __init pmac_pic_probe_oldstyle(void)
                 if (slave) {
                         max_irqs = 64;
                         level_mask[1] = OHARE_LEVEL_MASK;
-                        enable_second_ohare(slave);
                 }
         } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
                 max_irqs = max_real_irqs = 64;
@@ -438,14 +378,18 @@ static void __init pmac_pic_probe_oldstyle(void)
                         max_irqs = 128;
                         level_mask[2] = HEATHROW_LEVEL_MASK;
                         level_mask[3] = 0;
-                        pmac_fix_gatwick_interrupts(slave, max_real_irqs);
                 }
         }
         BUG_ON(master == NULL);
 
-        /* Set the handler for the main PIC */
-        for ( i = 0; i < max_real_irqs ; i++ )
-                irq_desc[i].chip = &pmac_pic;
+        /*
+         * Allocate an irq host
+         */
+        pmac_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, max_irqs,
+                                       &pmac_pic_host_ops,
+                                       max_irqs);
+        BUG_ON(pmac_pic_host == NULL);
+        irq_set_default_host(pmac_pic_host);
 
         /* Get addresses of first controller if we have a node for it */
         BUG_ON(of_address_to_resource(master, 0, &r));
@@ -472,39 +416,38 @@ static void __init pmac_pic_probe_oldstyle(void)
                         pmac_irq_hw[i++] =
                                 (volatile struct pmac_irq_hw __iomem *)
                                 (addr + 0x10);
-                irq_cascade = slave->intrs[0].line;
+                pmac_irq_cascade = irq_of_parse_and_map(slave, 0);
 
                 printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs"
                        " cascade: %d\n", slave->full_name,
-                       max_irqs - max_real_irqs, irq_cascade);
+                       max_irqs - max_real_irqs, pmac_irq_cascade);
         }
         of_node_put(slave);
 
-        /* disable all interrupts in all controllers */
+        /* Disable all interrupts in all controllers */
         for (i = 0; i * 32 < max_irqs; ++i)
                 out_le32(&pmac_irq_hw[i]->enable, 0);
 
-        /* mark level interrupts */
-        for (i = 0; i < max_irqs; i++)
-                if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
-                        irq_desc[i].status = IRQ_LEVEL;
+        /* Hookup cascade irq */
+        if (slave && pmac_irq_cascade != NO_IRQ)
+                setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
 
-        /* Setup handlers for secondary controller and hook cascade irq*/
-        if (slave) {
-                for ( i = max_real_irqs ; i < max_irqs ; i++ )
-                        irq_desc[i].chip = &gatwick_pic;
-                setup_irq(irq_cascade, &gatwick_cascade_action);
-        }
         printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
 #ifdef CONFIG_XMON
-        setup_irq(20, &xmon_action);
+        setup_irq(irq_create_mapping(NULL, 20, 0), &xmon_action);
 #endif
 }
 #endif /* CONFIG_PPC32 */
 
-static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc,
+                            struct pt_regs *regs)
 {
-        return mpic_get_one_irq((struct mpic *)data, regs);
+        struct mpic *mpic = desc->handler_data;
+
+        unsigned int cascade_irq = mpic_get_one_irq(mpic, regs);
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq, regs);
+        desc->chip->eoi(irq);
 }
 
 static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
@@ -514,21 +457,20 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
         int nmi_irq;
 
         pswitch = of_find_node_by_name(NULL, "programmer-switch");
-        if (pswitch && pswitch->n_intrs) {
-                nmi_irq = pswitch->intrs[0].line;
-                mpic_irq_set_priority(nmi_irq, 9);
-                setup_irq(nmi_irq, &xmon_action);
+        if (pswitch) {
+                nmi_irq = irq_of_parse_and_map(pswitch, 0);
+                if (nmi_irq != NO_IRQ) {
+                        mpic_irq_set_priority(nmi_irq, 9);
+                        setup_irq(nmi_irq, &xmon_action);
+                }
+                of_node_put(pswitch);
         }
-        of_node_put(pswitch);
 #endif  /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
 }
 
 static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
                                                 int master)
 {
-        unsigned char senses[128];
-        int offset = master ? 0 : 128;
-        int count = master ? 128 : 124;
         const char *name = master ? " MPIC 1   " : " MPIC 2   ";
         struct resource r;
         struct mpic *mpic;
@@ -541,8 +483,6 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 
         pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
 
-        prom_get_irq_senses(senses, offset, offset + count);
-
         flags |= MPIC_WANTS_RESET;
         if (get_property(np, "big-endian", NULL))
                 flags |= MPIC_BIG_ENDIAN;
@@ -553,8 +493,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
         if (master && (flags & MPIC_BIG_ENDIAN))
                 flags |= MPIC_BROKEN_U3;
 
-        mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
-                          senses, count, name);
+        mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
         if (mpic == NULL)
                 return NULL;
 
@@ -567,6 +506,7 @@ static int __init pmac_pic_probe_mpic(void)
 {
         struct mpic *mpic1, *mpic2;
         struct device_node *np, *master = NULL, *slave = NULL;
+        unsigned int cascade;
 
         /* We can have up to 2 MPICs cascaded */
         for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -603,8 +543,15 @@ static int __init pmac_pic_probe_mpic(void)
         of_node_put(master);
 
         /* No slave, let's go out */
-        if (slave == NULL || slave->n_intrs < 1)
+        if (slave == NULL)
+                return 0;
+
+        /* Get/Map slave interrupt */
+        cascade = irq_of_parse_and_map(slave, 0);
+        if (cascade == NO_IRQ) {
+                printk(KERN_ERR "Failed to map cascade IRQ\n");
                 return 0;
+        }
 
         mpic2 = pmac_setup_one_mpic(slave, 0);
         if (mpic2 == NULL) {
@@ -612,7 +559,8 @@ static int __init pmac_pic_probe_mpic(void)
                 of_node_put(slave);
                 return 0;
         }
-        mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
+        set_irq_data(cascade, mpic2);
+        set_irq_chained_handler(cascade, pmac_u3_cascade);
 
         of_node_put(slave);
         return 0;
@@ -621,6 +569,19 @@ static int __init pmac_pic_probe_mpic(void)
 
 void __init pmac_pic_init(void)
 {
+        unsigned int flags = 0;
+
+        /* We configure the OF parsing based on our oldworld vs. newworld
+         * platform type and wether we were booted by BootX.
+         */
+#ifdef CONFIG_PPC32
+        if (!pmac_newworld)
+                flags |= OF_IMAP_OLDWORLD_MAC;
+        if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
+                flags |= OF_IMAP_NO_PHANDLE;
+        of_irq_map_init(flags);
+#endif /* CONFIG_PPC_32 */
+
         /* We first try to detect Apple's new Core99 chipset, since mac-io
          * is quite different on those machines and contains an IBM MPIC2.
          */
@@ -643,6 +604,7 @@ unsigned long sleep_save_mask[2];
 
 /* This used to be passed by the PMU driver but that link got
  * broken with the new driver model. We use this tweak for now...
+ * We really want to do things differently though...
  */
 static int pmacpic_find_viaint(void)
 {
@@ -656,7 +618,7 @@ static int pmacpic_find_viaint(void)
         np = of_find_node_by_name(NULL, "via-pmu");
         if (np == NULL)
                 goto not_found;
-        viaint = np->intrs[0].line;
+        viaint = irq_of_parse_and_map(np, 0);;
 #endif /* CONFIG_ADB_PMU */
 
 not_found:
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 21c7b0f8f329..94e7b24b840b 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -12,6 +12,8 @@
 
 struct rtc_time;
 
+extern int pmac_newworld;
+
 extern long pmac_time_init(void);
 extern unsigned long pmac_get_boot_time(void);
 extern void pmac_get_rtc_time(struct rtc_time *);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 8654b5f07836..31a9da769fa2 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -613,9 +613,6 @@ static void __init pmac_init_early(void)
         udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
 
 #ifdef CONFIG_PPC64
-        /* Setup interrupt mapping options */
-        ppc64_interrupt_controller = IC_OPEN_PIC;
-
         iommu_init_early_dart();
 #endif
 }
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 9639c66b453d..9df783088b61 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -72,32 +72,62 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id,
 
 /* #define DEBUG */
 
-static void request_ras_irqs(struct device_node *np, char *propname,
+
+static void request_ras_irqs(struct device_node *np,
                         irqreturn_t (*handler)(int, void *, struct pt_regs *),
                         const char *name)
 {
-        unsigned int *ireg, len, i;
-        int virq, n_intr;
-
-        ireg = (unsigned int *)get_property(np, propname, &len);
-        if (ireg == NULL)
-                return;
-        n_intr = prom_n_intr_cells(np);
-        len /= n_intr * sizeof(*ireg);
-
-        for (i = 0; i < len; i++) {
-                virq = virt_irq_create_mapping(*ireg);
-                if (virq == NO_IRQ) {
-                        printk(KERN_ERR "Unable to allocate interrupt "
-                               "number for %s\n", np->full_name);
-                        return;
+        int i, index, count = 0;
+        struct of_irq oirq;
+        u32 *opicprop;
+        unsigned int opicplen;
+        unsigned int virqs[16];
+
+        /* Check for obsolete "open-pic-interrupt" property. If present, then
+         * map those interrupts using the default interrupt host and default
+         * trigger
+         */
+        opicprop = (u32 *)get_property(np, "open-pic-interrupt", &opicplen);
+        if (opicprop) {
+                opicplen /= sizeof(u32);
+                for (i = 0; i < opicplen; i++) {
+                        if (count > 15)
+                                break;
+                        virqs[count] = irq_create_mapping(NULL, *(opicprop++),
+                                                         IRQ_TYPE_NONE);
+                        if (virqs[count] == NO_IRQ)
+                                printk(KERN_ERR "Unable to allocate interrupt "
+                                       "number for %s\n", np->full_name);
+                        else
+                                count++;
+
                 }
-                if (request_irq(irq_offset_up(virq), handler, 0, name, NULL)) {
+        }
+        /* Else use normal interrupt tree parsing */
+        else {
+                /* First try to do a proper OF tree parsing */
+                for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+                     index++) {
+                        if (count > 15)
+                                break;
+                        virqs[count] = irq_create_of_mapping(oirq.controller,
+                                                            oirq.specifier,
+                                                            oirq.size);
+                        if (virqs[count] == NO_IRQ)
+                                printk(KERN_ERR "Unable to allocate interrupt "
+                                       "number for %s\n", np->full_name);
+                        else
+                                count++;
+                }
+        }
+
+        /* Now request them */
+        for (i = 0; i < count; i++) {
+                if (request_irq(virqs[i], handler, 0, name, NULL)) {
                         printk(KERN_ERR "Unable to request interrupt %d for "
-                               "%s\n", irq_offset_up(virq), np->full_name);
+                               "%s\n", virqs[i], np->full_name);
                         return;
                 }
-                ireg += n_intr;
         }
 }
 
@@ -115,20 +145,14 @@ static int __init init_ras_IRQ(void)
         /* Internal Errors */
         np = of_find_node_by_path("/event-sources/internal-errors");
         if (np != NULL) {
-                request_ras_irqs(np, "open-pic-interrupt", ras_error_interrupt,
-                                 "RAS_ERROR");
-                request_ras_irqs(np, "interrupts", ras_error_interrupt,
-                                 "RAS_ERROR");
+                request_ras_irqs(np, ras_error_interrupt, "RAS_ERROR");
                 of_node_put(np);
         }
 
         /* EPOW Events */
         np = of_find_node_by_path("/event-sources/epow-events");
         if (np != NULL) {
-                request_ras_irqs(np, "open-pic-interrupt", ras_epow_interrupt,
-                                 "RAS_EPOW");
-                request_ras_irqs(np, "interrupts", ras_epow_interrupt,
-                                 "RAS_EPOW");
+                request_ras_irqs(np, ras_epow_interrupt, "RAS_EPOW");
                 of_node_put(np);
         }
 
@@ -162,7 +186,7 @@ ras_epow_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 
         status = rtas_call(ras_check_exception_token, 6, 1, NULL,
                            RAS_VECTOR_OFFSET,
-                           virt_irq_to_real(irq_offset_down(irq)),
+                           irq_map[irq].hwirq,
                            RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
                            critical, __pa(&ras_log_buf),
                                 rtas_get_error_log_max());
@@ -198,7 +222,7 @@ ras_error_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 
         status = rtas_call(ras_check_exception_token, 6, 1, NULL,
                            RAS_VECTOR_OFFSET,
-                           virt_irq_to_real(irq_offset_down(irq)),
+                           irq_map[irq].hwirq,
                            RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
                            __pa(&ras_log_buf),
                                 rtas_get_error_log_max());
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 999509d28af8..54a52437265c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -76,6 +76,9 @@
 #define DBG(fmt...)
 #endif
 
+/* move those away to a .h */
+extern void smp_init_pseries_mpic(void);
+extern void smp_init_pseries_xics(void);
 extern void find_udbg_vterm(void);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
@@ -83,7 +86,7 @@ int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 static void pseries_shared_idle_sleep(void);
 static void pseries_dedicated_idle_sleep(void);
 
-struct mpic *pSeries_mpic;
+static struct device_node *pSeries_mpic_node;
 
 static void pSeries_show_cpuinfo(struct seq_file *m)
 {
@@ -118,63 +121,92 @@ static void __init fwnmi_init(void)
                 fwnmi_active = 1;
 }
 
-static void __init pSeries_init_mpic(void)
+void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc,
+                          struct pt_regs *regs)
 {
-        unsigned int *addrp;
-        struct device_node *np;
-        unsigned long intack = 0;
-
-        /* All ISUs are setup, complete initialization */
-        mpic_init(pSeries_mpic);
-
-        /* Check what kind of cascade ACK we have */
-        if (!(np = of_find_node_by_name(NULL, "pci"))
-            || !(addrp = (unsigned int *)
-                 get_property(np, "8259-interrupt-acknowledge", NULL)))
-                printk(KERN_ERR "Cannot find pci to get ack address\n");
-        else
-                intack = addrp[prom_n_addr_cells(np)-1];
-        of_node_put(np);
-
-        /* Setup the legacy interrupts & controller */
-        i8259_init(intack, 0);
-
-        /* Hook cascade to mpic */
-        mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+        unsigned int cascade_irq = i8259_irq(regs);
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq, regs);
+        desc->chip->eoi(irq);
 }
 
-static void __init pSeries_setup_mpic(void)
+static void __init pseries_mpic_init_IRQ(void)
 {
+        struct device_node *np, *old, *cascade = NULL;
+        unsigned int *addrp;
+        unsigned long intack = 0;
         unsigned int *opprop;
         unsigned long openpic_addr = 0;
-        unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS];
-        struct device_node *root;
-        int irq_count;
+        unsigned int cascade_irq;
+        int naddr, n, i, opplen;
+        struct mpic *mpic;
 
-        /* Find the Open PIC if present */
-        root = of_find_node_by_path("/");
-        opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL);
+        np = of_find_node_by_path("/");
+        naddr = prom_n_addr_cells(np);
+        opprop = (unsigned int *) get_property(np, "platform-open-pic", &opplen);
         if (opprop != 0) {
-                int n = prom_n_addr_cells(root);
-
-                for (openpic_addr = 0; n > 0; --n)
-                        openpic_addr = (openpic_addr << 32) + *opprop++;
+                openpic_addr = of_read_number(opprop, naddr);
                 printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
         }
-        of_node_put(root);
+        of_node_put(np);
 
         BUG_ON(openpic_addr == 0);
 
-        /* Get the sense values from OF */
-        prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS);
-        
         /* Setup the openpic driver */
-        irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
-        pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY,
-                                  16, 16, irq_count, /* isu size, irq offset, irq count */ 
-                                  NR_IRQS - 4, /* ipi offset */
-                                  senses, irq_count, /* sense & sense size */
-                                  " MPIC     ");
+        mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
+                          MPIC_PRIMARY,
+                          16, 250, /* isu size, irq count */
+                          " MPIC     ");
+        BUG_ON(mpic == NULL);
+
+        /* Add ISUs */
+        opplen /= sizeof(u32);
+        for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+                unsigned long isuaddr = of_read_number(opprop + i, naddr);
+                mpic_assign_isu(mpic, n, isuaddr);
+        }
+
+        /* All ISUs are setup, complete initialization */
+        mpic_init(mpic);
+
+        /* Look for cascade */
+        for_each_node_by_type(np, "interrupt-controller")
+                if (device_is_compatible(np, "chrp,iic")) {
+                        cascade = np;
+                        break;
+                }
+        if (cascade == NULL)
+                return;
+
+        cascade_irq = irq_of_parse_and_map(cascade, 0);
+        if (cascade == NO_IRQ) {
+                printk(KERN_ERR "xics: failed to map cascade interrupt");
+                return;
+        }
+
+        /* Check ACK type */
+        for (old = of_node_get(cascade); old != NULL ; old = np) {
+                np = of_get_parent(old);
+                of_node_put(old);
+                if (np == NULL)
+                        break;
+                if (strcmp(np->name, "pci") != 0)
+                        continue;
+                addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge",
+                                            NULL);
+                if (addrp == NULL)
+                        continue;
+                naddr = prom_n_addr_cells(np);
+                intack = addrp[naddr-1];
+                if (naddr > 1)
+                        intack |= ((unsigned long)addrp[naddr-2]) << 32;
+        }
+        if (intack)
+                printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
+                       intack);
+        i8259_init(cascade, intack);
+        of_node_put(cascade);
+        set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
 }
 
 static void pseries_lpar_enable_pmcs(void)
@@ -192,23 +224,67 @@ static void pseries_lpar_enable_pmcs(void)
                 get_lppaca()->pmcregs_in_use = 1;
 }
 
-static void __init pSeries_setup_arch(void)
+#ifdef CONFIG_KEXEC
+static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary)
 {
-        /* Fixup ppc_md depending on the type of interrupt controller */
-        if (ppc64_interrupt_controller == IC_OPEN_PIC) {
-                ppc_md.init_IRQ       = pSeries_init_mpic;
-                ppc_md.get_irq        = mpic_get_irq;
-                /* Allocate the mpic now, so that find_and_init_phbs() can
-                 * fill the ISUs */
-                pSeries_setup_mpic();
-        } else {
-                ppc_md.init_IRQ       = xics_init_IRQ;
-                ppc_md.get_irq        = xics_get_irq;
+        mpic_teardown_this_cpu(secondary);
+}
+
+static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary)
+{
+        /* Don't risk a hypervisor call if we're crashing */
+        if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
+                unsigned long vpa = __pa(get_lppaca());
+
+                if (unregister_vpa(hard_smp_processor_id(), vpa)) {
+                        printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
+                                        "failed\n", smp_processor_id(),
+                                        hard_smp_processor_id());
+                }
         }
+        xics_teardown_cpu(secondary);
+}
+#endif /* CONFIG_KEXEC */
 
+static void __init pseries_discover_pic(void)
+{
+        struct device_node *np;
+        char *typep;
+
+        for (np = NULL; (np = of_find_node_by_name(np,
+                                                   "interrupt-controller"));) {
+                typep = (char *)get_property(np, "compatible", NULL);
+                if (strstr(typep, "open-pic")) {
+                        pSeries_mpic_node = of_node_get(np);
+                        ppc_md.init_IRQ       = pseries_mpic_init_IRQ;
+                        ppc_md.get_irq        = mpic_get_irq;
+#ifdef CONFIG_KEXEC
+                        ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic;
+#endif
+#ifdef CONFIG_SMP
+                        smp_init_pseries_mpic();
+#endif
+                        return;
+                } else if (strstr(typep, "ppc-xicp")) {
+                        ppc_md.init_IRQ       = xics_init_IRQ;
+#ifdef CONFIG_KEXEC
+                        ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
+#endif
 #ifdef CONFIG_SMP
-        smp_init_pSeries();
+                        smp_init_pseries_xics();
 #endif
+                        return;
+                }
+        }
+        printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
+               " interrupt-controller\n");
+}
+
+static void __init pSeries_setup_arch(void)
+{
+        /* Discover PIC type and setup ppc_md accordingly */
+        pseries_discover_pic();
+
         /* openpic global configuration register (64-bit format). */
         /* openpic Interrupt Source Unit pointer (64-bit format). */
         /* python0 facility area (mmio) (64-bit format) REAL address. */
@@ -260,41 +336,11 @@ static int __init pSeries_init_panel(void)
 }
 arch_initcall(pSeries_init_panel);
 
-static  void __init pSeries_discover_pic(void)
-{
-        struct device_node *np;
-        char *typep;
-
-        /*
-         * Setup interrupt mapping options that are needed for finish_device_tree
-         * to properly parse the OF interrupt tree & do the virtual irq mapping
-         */
-        __irq_offset_value = NUM_ISA_INTERRUPTS;
-        ppc64_interrupt_controller = IC_INVALID;
-        for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) {
-                typep = (char *)get_property(np, "compatible", NULL);
-                if (strstr(typep, "open-pic")) {
-                        ppc64_interrupt_controller = IC_OPEN_PIC;
-                        break;
-                } else if (strstr(typep, "ppc-xicp")) {
-                        ppc64_interrupt_controller = IC_PPC_XIC;
-                        break;
-                }
-        }
-        if (ppc64_interrupt_controller == IC_INVALID)
-                printk("pSeries_discover_pic: failed to recognize"
-                        " interrupt-controller\n");
-
-}
-
 static void pSeries_mach_cpu_die(void)
 {
         local_irq_disable();
         idle_task_exit();
-        /* Some hardware requires clearing the CPPR, while other hardware does not
-         * it is safe either way
-         */
-        pSeriesLP_cppr_info(0, 0);
+        xics_teardown_cpu(0);
         rtas_stop_self();
         /* Should never get here... */
         BUG();
@@ -332,8 +378,6 @@ static void __init pSeries_init_early(void)
 
         iommu_init_early_pSeries();
 
-        pSeries_discover_pic();
-
         DBG(" <- pSeries_init_early()\n");
 }
 
@@ -505,27 +549,6 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
         return PCI_PROBE_NORMAL;
 }
 
-#ifdef CONFIG_KEXEC
-static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
-{
-        /* Don't risk a hypervisor call if we're crashing */
-        if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
-                unsigned long vpa = __pa(get_lppaca());
-
-                if (unregister_vpa(hard_smp_processor_id(), vpa)) {
-                        printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
-                                        "failed\n", smp_processor_id(),
-                                        hard_smp_processor_id());
-                }
-        }
-
-        if (ppc64_interrupt_controller == IC_OPEN_PIC)
-                mpic_teardown_this_cpu(secondary);
-        else
-                xics_teardown_cpu(secondary);
-}
-#endif
-
 define_machine(pseries) {
         .name                   = "pSeries",
         .probe                  = pSeries_probe,
@@ -550,7 +573,6 @@ define_machine(pseries) {
         .system_reset_exception = pSeries_system_reset_exception,
         .machine_check_exception = pSeries_machine_check_exception,
 #ifdef CONFIG_KEXEC
-        .kexec_cpu_down         = pseries_kexec_cpu_down,
         .machine_kexec          = default_machine_kexec,
         .machine_kexec_prepare  = default_machine_kexec_prepare,
         .machine_crash_shutdown = default_machine_crash_shutdown,
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 4ad144df49c2..ac61098ff401 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -416,27 +416,12 @@ static struct smp_ops_t pSeries_xics_smp_ops = {
 #endif
 
 /* This is called very early */
-void __init smp_init_pSeries(void)
+static void __init smp_init_pseries(void)
 {
         int i;
 
         DBG(" -> smp_init_pSeries()\n");
 
-        switch (ppc64_interrupt_controller) {
-#ifdef CONFIG_MPIC
-        case IC_OPEN_PIC:
-                smp_ops = &pSeries_mpic_smp_ops;
-                break;
-#endif
-#ifdef CONFIG_XICS
-        case IC_PPC_XIC:
-                smp_ops = &pSeries_xics_smp_ops;
-                break;
-#endif
-        default:
-                panic("Invalid interrupt controller");
-        }
-
 #ifdef CONFIG_HOTPLUG_CPU
         smp_ops->cpu_disable = pSeries_cpu_disable;
         smp_ops->cpu_die = pSeries_cpu_die;
@@ -471,3 +456,18 @@ void __init smp_init_pSeries(void)
         DBG(" <- smp_init_pSeries()\n");
 }
 
+#ifdef CONFIG_MPIC
+void __init smp_init_pseries_mpic(void)
+{
+        smp_ops = &pSeries_mpic_smp_ops;
+
+        smp_init_pseries();
+}
+#endif
+
+void __init smp_init_pseries_xics(void)
+{
+        smp_ops = &pSeries_xics_smp_ops;
+
+        smp_init_pseries();
+}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 2ffebe31cb2d..716972aa9777 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -8,6 +8,9 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
+
+#undef DEBUG
+
 #include <linux/types.h>
 #include <linux/threads.h>
 #include <linux/kernel.h>
@@ -19,6 +22,7 @@
 #include <linux/gfp.h>
 #include <linux/radix-tree.h>
 #include <linux/cpu.h>
+
 #include <asm/firmware.h>
 #include <asm/prom.h>
 #include <asm/io.h>
@@ -31,26 +35,6 @@
 
 #include "xics.h"
 
-static unsigned int xics_startup(unsigned int irq);
-static void xics_enable_irq(unsigned int irq);
-static void xics_disable_irq(unsigned int irq);
-static void xics_mask_and_ack_irq(unsigned int irq);
-static void xics_end_irq(unsigned int irq);
-static void xics_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-static struct hw_interrupt_type xics_pic = {
-        .typename = " XICS     ",
-        .startup = xics_startup,
-        .enable = xics_enable_irq,
-        .disable = xics_disable_irq,
-        .ack = xics_mask_and_ack_irq,
-        .end = xics_end_irq,
-        .set_affinity = xics_set_affinity
-};
-
-/* This is used to map real irq numbers to virtual */
-static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC);
-
 #define XICS_IPI                2
 #define XICS_IRQ_SPURIOUS       0
 
@@ -81,12 +65,12 @@ struct xics_ipl {
 
 static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
 
-static int xics_irq_8259_cascade = 0;
-static int xics_irq_8259_cascade_real = 0;
 static unsigned int default_server = 0xFF;
 static unsigned int default_distrib_server = 0;
 static unsigned int interrupt_server_size = 8;
 
+static struct irq_host *xics_host;
+
 /*
  * XICS only has a single IPI, so encode the messages per CPU
  */
@@ -98,48 +82,34 @@ static int ibm_set_xive;
 static int ibm_int_on;
 static int ibm_int_off;
 
-typedef struct {
-        int (*xirr_info_get)(int cpu);
-        void (*xirr_info_set)(int cpu, int val);
-        void (*cppr_info)(int cpu, u8 val);
-        void (*qirr_info)(int cpu, u8 val);
-} xics_ops;
 
+/* Direct HW low level accessors */
 
-/* SMP */
 
-static int pSeries_xirr_info_get(int n_cpu)
+static inline unsigned int direct_xirr_info_get(int n_cpu)
 {
         return in_be32(&xics_per_cpu[n_cpu]->xirr.word);
 }
 
-static void pSeries_xirr_info_set(int n_cpu, int value)
+static inline void direct_xirr_info_set(int n_cpu, int value)
 {
         out_be32(&xics_per_cpu[n_cpu]->xirr.word, value);
 }
 
-static void pSeries_cppr_info(int n_cpu, u8 value)
+static inline void direct_cppr_info(int n_cpu, u8 value)
 {
         out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value);
 }
 
-static void pSeries_qirr_info(int n_cpu, u8 value)
+static inline void direct_qirr_info(int n_cpu, u8 value)
 {
         out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value);
 }
 
-static xics_ops pSeries_ops = {
-        pSeries_xirr_info_get,
-        pSeries_xirr_info_set,
-        pSeries_cppr_info,
-        pSeries_qirr_info
-};
 
-static xics_ops *ops = &pSeries_ops;
+/* LPAR low level accessors */
 
 
-/* LPAR */
-
 static inline long plpar_eoi(unsigned long xirr)
 {
         return plpar_hcall_norets(H_EOI, xirr);
@@ -161,7 +131,7 @@ static inline long plpar_xirr(unsigned long *xirr_ret)
         return plpar_hcall(H_XIRR, 0, 0, 0, 0, xirr_ret, &dummy, &dummy);
 }
 
-static int pSeriesLP_xirr_info_get(int n_cpu)
+static inline unsigned int lpar_xirr_info_get(int n_cpu)
 {
         unsigned long lpar_rc;
         unsigned long return_value;
@@ -169,10 +139,10 @@ static int pSeriesLP_xirr_info_get(int n_cpu)
         lpar_rc = plpar_xirr(&return_value);
         if (lpar_rc != H_SUCCESS)
                 panic(" bad return code xirr - rc = %lx \n", lpar_rc);
-        return (int)return_value;
+        return (unsigned int)return_value;
 }
 
-static void pSeriesLP_xirr_info_set(int n_cpu, int value)
+static inline void lpar_xirr_info_set(int n_cpu, int value)
 {
         unsigned long lpar_rc;
         unsigned long val64 = value & 0xffffffff;
@@ -183,7 +153,7 @@ static void pSeriesLP_xirr_info_set(int n_cpu, int value)
                       val64);
 }
 
-void pSeriesLP_cppr_info(int n_cpu, u8 value)
+static inline void lpar_cppr_info(int n_cpu, u8 value)
 {
         unsigned long lpar_rc;
 
@@ -192,7 +162,7 @@ void pSeriesLP_cppr_info(int n_cpu, u8 value)
                 panic("bad return code cppr - rc = %lx\n", lpar_rc);
 }
 
-static void pSeriesLP_qirr_info(int n_cpu , u8 value)
+static inline void lpar_qirr_info(int n_cpu , u8 value)
 {
         unsigned long lpar_rc;
 
@@ -201,43 +171,16 @@ static void pSeriesLP_qirr_info(int n_cpu , u8 value)
                 panic("bad return code qirr - rc = %lx\n", lpar_rc);
 }
 
-xics_ops pSeriesLP_ops = {
-        pSeriesLP_xirr_info_get,
-        pSeriesLP_xirr_info_set,
-        pSeriesLP_cppr_info,
-        pSeriesLP_qirr_info
-};
-
-static unsigned int xics_startup(unsigned int virq)
-{
-        unsigned int irq;
-
-        irq = irq_offset_down(virq);
-        if (radix_tree_insert(&irq_map, virt_irq_to_real(irq),
-                              &virt_irq_to_real_map[irq]) == -ENOMEM)
-                printk(KERN_CRIT "Out of memory creating real -> virtual"
-                       " IRQ mapping for irq %u (real 0x%x)\n",
-                       virq, virt_irq_to_real(irq));
-        xics_enable_irq(virq);
-        return 0;       /* return value is ignored */
-}
 
-static unsigned int real_irq_to_virt(unsigned int real_irq)
-{
-        unsigned int *ptr;
+/* High level handlers and init code */
 
-        ptr = radix_tree_lookup(&irq_map, real_irq);
-        if (ptr == NULL)
-                return NO_IRQ;
-        return ptr - virt_irq_to_real_map;
-}
 
 #ifdef CONFIG_SMP
-static int get_irq_server(unsigned int irq)
+static int get_irq_server(unsigned int virq)
 {
         unsigned int server;
         /* For the moment only implement delivery to all cpus or one cpu */
-        cpumask_t cpumask = irq_desc[irq].affinity;
+        cpumask_t cpumask = irq_desc[virq].affinity;
         cpumask_t tmp = CPU_MASK_NONE;
 
         if (!distribute_irqs)
@@ -258,23 +201,28 @@ static int get_irq_server(unsigned int irq)
 
 }
 #else
-static int get_irq_server(unsigned int irq)
+static int get_irq_server(unsigned int virq)
 {
         return default_server;
 }
 #endif
 
-static void xics_enable_irq(unsigned int virq)
+
+static void xics_unmask_irq(unsigned int virq)
 {
         unsigned int irq;
         int call_status;
         unsigned int server;
 
-        irq = virt_irq_to_real(irq_offset_down(virq));
-        if (irq == XICS_IPI)
+        pr_debug("xics: unmask virq %d\n", virq);
+
+        irq = (unsigned int)irq_map[virq].hwirq;
+        pr_debug(" -> map to hwirq 0x%x\n", irq);
+        if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
                 return;
 
         server = get_irq_server(virq);
+
         call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
                                 DEFAULT_PRIORITY);
         if (call_status != 0) {
@@ -293,7 +241,7 @@ static void xics_enable_irq(unsigned int virq)
         }
 }
 
-static void xics_disable_real_irq(unsigned int irq)
+static void xics_mask_real_irq(unsigned int irq)
 {
         int call_status;
         unsigned int server;
@@ -318,75 +266,86 @@ static void xics_disable_real_irq(unsigned int irq)
         }
 }
 
-static void xics_disable_irq(unsigned int virq)
+static void xics_mask_irq(unsigned int virq)
 {
         unsigned int irq;
 
-        irq = virt_irq_to_real(irq_offset_down(virq));
-        xics_disable_real_irq(irq);
+        pr_debug("xics: mask virq %d\n", virq);
+
+        irq = (unsigned int)irq_map[virq].hwirq;
+        if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+                return;
+        xics_mask_real_irq(irq);
+}
+
+static unsigned int xics_startup(unsigned int virq)
+{
+        unsigned int irq;
+
+        /* force a reverse mapping of the interrupt so it gets in the cache */
+        irq = (unsigned int)irq_map[virq].hwirq;
+        irq_radix_revmap(xics_host, irq);
+
+        /* unmask it */
+        xics_unmask_irq(virq);
+        return 0;
 }
 
-static void xics_end_irq(unsigned int irq)
+static void xics_eoi_direct(unsigned int virq)
 {
         int cpu = smp_processor_id();
+        unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
         iosync();
-        ops->xirr_info_set(cpu, ((0xff << 24) |
-                                 (virt_irq_to_real(irq_offset_down(irq)))));
-
+        direct_xirr_info_set(cpu, (0xff << 24) | irq);
 }
 
-static void xics_mask_and_ack_irq(unsigned int irq)
+
+static void xics_eoi_lpar(unsigned int virq)
 {
         int cpu = smp_processor_id();
+        unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
-        if (irq < irq_offset_value()) {
-                i8259_pic.ack(irq);
-                iosync();
-                ops->xirr_info_set(cpu, ((0xff<<24) |
-                                         xics_irq_8259_cascade_real));
-                iosync();
-        }
+        iosync();
+        lpar_xirr_info_set(cpu, (0xff << 24) | irq);
 }
 
-int xics_get_irq(struct pt_regs *regs)
+static inline unsigned int xics_remap_irq(unsigned int vec)
 {
-        unsigned int cpu = smp_processor_id();
-        unsigned int vec;
-        int irq;
+        unsigned int irq;
 
-        vec = ops->xirr_info_get(cpu);
-        /*  (vec >> 24) == old priority */
         vec &= 0x00ffffff;
 
-        /* for sanity, this had better be < NR_IRQS - 16 */
-        if (vec == xics_irq_8259_cascade_real) {
-                irq = i8259_irq(regs);
-                xics_end_irq(irq_offset_up(xics_irq_8259_cascade));
-        } else if (vec == XICS_IRQ_SPURIOUS) {
-                irq = -1;
-        } else {
-                irq = real_irq_to_virt(vec);
-                if (irq == NO_IRQ)
-                        irq = real_irq_to_virt_slowpath(vec);
-                if (irq == NO_IRQ) {
-                        printk(KERN_ERR "Interrupt %u (real) is invalid,"
-                               " disabling it.\n", vec);
-                        xics_disable_real_irq(vec);
-                } else
-                        irq = irq_offset_up(irq);
-        }
-        return irq;
+        if (vec == XICS_IRQ_SPURIOUS)
+                return NO_IRQ;
+        irq = irq_radix_revmap(xics_host, vec);
+        if (likely(irq != NO_IRQ))
+                return irq;
+
+        printk(KERN_ERR "Interrupt %u (real) is invalid,"
+               " disabling it.\n", vec);
+        xics_mask_real_irq(vec);
+        return NO_IRQ;
 }
 
-#ifdef CONFIG_SMP
+static unsigned int xics_get_irq_direct(struct pt_regs *regs)
+{
+        unsigned int cpu = smp_processor_id();
 
-static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
+        return xics_remap_irq(direct_xirr_info_get(cpu));
+}
+
+static unsigned int xics_get_irq_lpar(struct pt_regs *regs)
 {
-        int cpu = smp_processor_id();
+        unsigned int cpu = smp_processor_id();
+
+        return xics_remap_irq(lpar_xirr_info_get(cpu));
+}
 
-        ops->qirr_info(cpu, 0xff);
+#ifdef CONFIG_SMP
 
+static irqreturn_t xics_ipi_dispatch(int cpu, struct pt_regs *regs)
+{
         WARN_ON(cpu_is_offline(cpu));
 
         while (xics_ipi_message[cpu].value) {
@@ -418,18 +377,88 @@ static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
         return IRQ_HANDLED;
 }
 
+static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id, struct pt_regs *regs)
+{
+        int cpu = smp_processor_id();
+
+        direct_qirr_info(cpu, 0xff);
+
+        return xics_ipi_dispatch(cpu, regs);
+}
+
+static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id, struct pt_regs *regs)
+{
+        int cpu = smp_processor_id();
+
+        lpar_qirr_info(cpu, 0xff);
+
+        return xics_ipi_dispatch(cpu, regs);
+}
+
 void xics_cause_IPI(int cpu)
 {
-        ops->qirr_info(cpu, IPI_PRIORITY);
+        if (firmware_has_feature(FW_FEATURE_LPAR))
+                lpar_qirr_info(cpu, IPI_PRIORITY);
+        else
+                direct_qirr_info(cpu, IPI_PRIORITY);
 }
+
 #endif /* CONFIG_SMP */
 
+static void xics_set_cpu_priority(int cpu, unsigned char cppr)
+{
+        if (firmware_has_feature(FW_FEATURE_LPAR))
+                lpar_cppr_info(cpu, cppr);
+        else
+                direct_cppr_info(cpu, cppr);
+        iosync();
+}
+
+static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
+{
+        unsigned int irq;
+        int status;
+        int xics_status[2];
+        unsigned long newmask;
+        cpumask_t tmp = CPU_MASK_NONE;
+
+        irq = (unsigned int)irq_map[virq].hwirq;
+        if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+                return;
+
+        status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
+
+        if (status) {
+                printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
+                       "returns %d\n", irq, status);
+                return;
+        }
+
+        /* For the moment only implement delivery to all cpus or one cpu */
+        if (cpus_equal(cpumask, CPU_MASK_ALL)) {
+                newmask = default_distrib_server;
+        } else {
+                cpus_and(tmp, cpu_online_map, cpumask);
+                if (cpus_empty(tmp))
+                        return;
+                newmask = get_hard_smp_processor_id(first_cpu(tmp));
+        }
+
+        status = rtas_call(ibm_set_xive, 3, 1, NULL,
+                                irq, newmask, xics_status[1]);
+
+        if (status) {
+                printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
+                       "returns %d\n", irq, status);
+                return;
+        }
+}
+
 void xics_setup_cpu(void)
 {
         int cpu = smp_processor_id();
 
-        ops->cppr_info(cpu, 0xff);
-        iosync();
+        xics_set_cpu_priority(cpu, 0xff);
 
         /*
          * Put the calling processor into the GIQ.  This is really only
@@ -442,72 +471,266 @@ void xics_setup_cpu(void)
                 (1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
 }
 
-void xics_init_IRQ(void)
+
+static struct irq_chip xics_pic_direct = {
+        .typename = " XICS     ",
+        .startup = xics_startup,
+        .mask = xics_mask_irq,
+        .unmask = xics_unmask_irq,
+        .eoi = xics_eoi_direct,
+        .set_affinity = xics_set_affinity
+};
+
+
+static struct irq_chip xics_pic_lpar = {
+        .typename = " XICS     ",
+        .startup = xics_startup,
+        .mask = xics_mask_irq,
+        .unmask = xics_unmask_irq,
+        .eoi = xics_eoi_lpar,
+        .set_affinity = xics_set_affinity
+};
+
+
+static int xics_host_match(struct irq_host *h, struct device_node *node)
+{
+        /* IBM machines have interrupt parents of various funky types for things
+         * like vdevices, events, etc... The trick we use here is to match
+         * everything here except the legacy 8259 which is compatible "chrp,iic"
+         */
+        return !device_is_compatible(node, "chrp,iic");
+}
+
+static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
+                                irq_hw_number_t hw, unsigned int flags)
+{
+        unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+
+        pr_debug("xics: map_direct virq %d, hwirq 0x%lx, flags: 0x%x\n",
+                 virq, hw, flags);
+
+        if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+                printk(KERN_WARNING "xics: using unsupported sense 0x%x"
+                       " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+
+        get_irq_desc(virq)->status |= IRQ_LEVEL;
+        set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
+        return 0;
+}
+
+static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
+                              irq_hw_number_t hw, unsigned int flags)
+{
+        unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+
+        pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n",
+                 virq, hw, flags);
+
+        if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+                printk(KERN_WARNING "xics: using unsupported sense 0x%x"
+                       " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+
+        get_irq_desc(virq)->status |= IRQ_LEVEL;
+        set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
+        return 0;
+}
+
+static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
+                           u32 *intspec, unsigned int intsize,
+                           irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+        /* Current xics implementation translates everything
+         * to level. It is not technically right for MSIs but this
+         * is irrelevant at this point. We might get smarter in the future
+         */
+        *out_hwirq = intspec[0];
+        *out_flags = IRQ_TYPE_LEVEL_LOW;
+
+        return 0;
+}
+
+static struct irq_host_ops xics_host_direct_ops = {
+        .match = xics_host_match,
+        .map = xics_host_map_direct,
+        .xlate = xics_host_xlate,
+};
+
+static struct irq_host_ops xics_host_lpar_ops = {
+        .match = xics_host_match,
+        .map = xics_host_map_lpar,
+        .xlate = xics_host_xlate,
+};
+
+static void __init xics_init_host(void)
+{
+        struct irq_host_ops *ops;
+
+        if (firmware_has_feature(FW_FEATURE_LPAR))
+                ops = &xics_host_lpar_ops;
+        else
+                ops = &xics_host_direct_ops;
+        xics_host = irq_alloc_host(IRQ_HOST_MAP_TREE, 0, ops,
+                                   XICS_IRQ_SPURIOUS);
+        BUG_ON(xics_host == NULL);
+        irq_set_default_host(xics_host);
+}
+
+static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
+                                     unsigned long size)
 {
+#ifdef CONFIG_SMP
         int i;
-        unsigned long intr_size = 0;
-        struct device_node *np;
-        uint *ireg, ilen, indx = 0;
-        unsigned long intr_base = 0;
-        struct xics_interrupt_node {
-                unsigned long addr;
-                unsigned long size;
-        } intnodes[NR_CPUS];
 
-        ppc64_boot_msg(0x20, "XICS Init");
+        /* This may look gross but it's good enough for now, we don't quite
+         * have a hard -> linux processor id matching.
+         */
+        for_each_possible_cpu(i) {
+                if (!cpu_present(i))
+                        continue;
+                if (hw_id == get_hard_smp_processor_id(i)) {
+                        xics_per_cpu[i] = ioremap(addr, size);
+                        return;
+                }
+        }
+#else
+        if (hw_id != 0)
+                return;
+        xics_per_cpu[0] = ioremap(addr, size);
+#endif /* CONFIG_SMP */
+}
 
-        ibm_get_xive = rtas_token("ibm,get-xive");
-        ibm_set_xive = rtas_token("ibm,set-xive");
-        ibm_int_on  = rtas_token("ibm,int-on");
-        ibm_int_off = rtas_token("ibm,int-off");
+static void __init xics_init_one_node(struct device_node *np,
+                                      unsigned int *indx)
+{
+        unsigned int ilen;
+        u32 *ireg;
 
-        np = of_find_node_by_type(NULL, "PowerPC-External-Interrupt-Presentation");
-        if (!np)
-                panic("xics_init_IRQ: can't find interrupt presentation");
+        /* This code does the theorically broken assumption that the interrupt
+         * server numbers are the same as the hard CPU numbers.
+         * This happens to be the case so far but we are playing with fire...
+         * should be fixed one of these days. -BenH.
+         */
+        ireg = (u32 *)get_property(np, "ibm,interrupt-server-ranges", NULL);
 
-nextnode:
-        ireg = (uint *)get_property(np, "ibm,interrupt-server-ranges", NULL);
+        /* Do that ever happen ? we'll know soon enough... but even good'old
+         * f80 does have that property ..
+         */
+        WARN_ON(ireg == NULL);
         if (ireg) {
                 /*
                  * set node starting index for this node
                  */
-                indx = *ireg;
+                *indx = *ireg;
         }
-
-        ireg = (uint *)get_property(np, "reg", &ilen);
+        ireg = (u32 *)get_property(np, "reg", &ilen);
         if (!ireg)
                 panic("xics_init_IRQ: can't find interrupt reg property");
 
-        while (ilen) {
-                intnodes[indx].addr = (unsigned long)*ireg++ << 32;
-                ilen -= sizeof(uint);
-                intnodes[indx].addr |= *ireg++;
-                ilen -= sizeof(uint);
-                intnodes[indx].size = (unsigned long)*ireg++ << 32;
-                ilen -= sizeof(uint);
-                intnodes[indx].size |= *ireg++;
-                ilen -= sizeof(uint);
-                indx++;
-                if (indx >= NR_CPUS) break;
+        while (ilen >= (4 * sizeof(u32))) {
+                unsigned long addr, size;
+
+                /* XXX Use proper OF parsing code here !!! */
+                addr = (unsigned long)*ireg++ << 32;
+                ilen -= sizeof(u32);
+                addr |= *ireg++;
+                ilen -= sizeof(u32);
+                size = (unsigned long)*ireg++ << 32;
+                ilen -= sizeof(u32);
+                size |= *ireg++;
+                ilen -= sizeof(u32);
+                xics_map_one_cpu(*indx, addr, size);
+                (*indx)++;
+        }
+}
+
+
+static void __init xics_setup_8259_cascade(void)
+{
+        struct device_node *np, *old, *found = NULL;
+        int cascade, naddr;
+        u32 *addrp;
+        unsigned long intack = 0;
+
+        for_each_node_by_type(np, "interrupt-controller")
+                if (device_is_compatible(np, "chrp,iic")) {
+                        found = np;
+                        break;
+                }
+        if (found == NULL) {
+                printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
+                return;
+        }
+        cascade = irq_of_parse_and_map(found, 0);
+        if (cascade == NO_IRQ) {
+                printk(KERN_ERR "xics: failed to map cascade interrupt");
+                return;
+        }
+        pr_debug("xics: cascade mapped to irq %d\n", cascade);
+
+        for (old = of_node_get(found); old != NULL ; old = np) {
+                np = of_get_parent(old);
+                of_node_put(old);
+                if (np == NULL)
+                        break;
+                if (strcmp(np->name, "pci") != 0)
+                        continue;
+                addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge", NULL);
+                if (addrp == NULL)
+                        continue;
+                naddr = prom_n_addr_cells(np);
+                intack = addrp[naddr-1];
+                if (naddr > 1)
+                        intack |= ((unsigned long)addrp[naddr-2]) << 32;
+        }
+        if (intack)
+                printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
+        i8259_init(found, intack);
+        of_node_put(found);
+        set_irq_chained_handler(cascade, pseries_8259_cascade);
+}
+
+void __init xics_init_IRQ(void)
+{
+        int i;
+        struct device_node *np;
+        u32 *ireg, ilen, indx = 0;
+        int found = 0;
+
+        ppc64_boot_msg(0x20, "XICS Init");
+
+        ibm_get_xive = rtas_token("ibm,get-xive");
+        ibm_set_xive = rtas_token("ibm,set-xive");
+        ibm_int_on  = rtas_token("ibm,int-on");
+        ibm_int_off = rtas_token("ibm,int-off");
+
+        for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
+                found = 1;
+                if (firmware_has_feature(FW_FEATURE_LPAR))
+                        break;
+                xics_init_one_node(np, &indx);
         }
+        if (found == 0)
+                return;
 
-        np = of_find_node_by_type(np, "PowerPC-External-Interrupt-Presentation");
-        if ((indx < NR_CPUS) && np) goto nextnode;
+        xics_init_host();
 
         /* Find the server numbers for the boot cpu. */
         for (np = of_find_node_by_type(NULL, "cpu");
              np;
              np = of_find_node_by_type(np, "cpu")) {
-                ireg = (uint *)get_property(np, "reg", &ilen);
+                ireg = (u32 *)get_property(np, "reg", &ilen);
                 if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) {
-                        ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s",
-                                                    &ilen);
+                        ireg = (u32 *)get_property(np,
+                                                  "ibm,ppc-interrupt-gserver#s",
+                                                   &ilen);
                         i = ilen / sizeof(int);
                         if (ireg && i > 0) {
                                 default_server = ireg[0];
-                                default_distrib_server = ireg[i-1]; /* take last element */
+                                /* take last element */
+                                default_distrib_server = ireg[i-1];
                         }
-                        ireg = (uint *)get_property(np,
+                        ireg = (u32 *)get_property(np,
                                         "ibm,interrupt-server#-size", NULL);
                         if (ireg)
                                 interrupt_server_size = *ireg;
@@ -516,135 +739,48 @@ nextnode:
         }
         of_node_put(np);
 
-        intr_base = intnodes[0].addr;
-        intr_size = intnodes[0].size;
-
-        np = of_find_node_by_type(NULL, "interrupt-controller");
-        if (!np) {
-                printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
-                xics_irq_8259_cascade_real = -1;
-                xics_irq_8259_cascade = -1;
-        } else {
-                ireg = (uint *) get_property(np, "interrupts", NULL);
-                if (!ireg)
-                        panic("xics_init_IRQ: can't find ISA interrupts property");
-
-                xics_irq_8259_cascade_real = *ireg;
-                xics_irq_8259_cascade
-                        = virt_irq_create_mapping(xics_irq_8259_cascade_real);
-                i8259_init(0, 0);
-                of_node_put(np);
-        }
-
         if (firmware_has_feature(FW_FEATURE_LPAR))
-                ops = &pSeriesLP_ops;
-        else {
-#ifdef CONFIG_SMP
-                for_each_possible_cpu(i) {
-                        int hard_id;
-
-                        /* FIXME: Do this dynamically! --RR */
-                        if (!cpu_present(i))
-                                continue;
-
-                        hard_id = get_hard_smp_processor_id(i);
-                        xics_per_cpu[i] = ioremap(intnodes[hard_id].addr,
-                                                  intnodes[hard_id].size);
-                }
-#else
-                xics_per_cpu[0] = ioremap(intr_base, intr_size);
-#endif /* CONFIG_SMP */
-        }
-
-        for (i = irq_offset_value(); i < NR_IRQS; ++i)
-                get_irq_desc(i)->chip = &xics_pic;
+                ppc_md.get_irq = xics_get_irq_lpar;
+        else
+                ppc_md.get_irq = xics_get_irq_direct;
 
         xics_setup_cpu();
 
+        xics_setup_8259_cascade();
+
         ppc64_boot_msg(0x21, "XICS Done");
 }
 
-/*
- * We cant do this in init_IRQ because we need the memory subsystem up for
- * request_irq()
- */
-static int __init xics_setup_i8259(void)
-{
-        if (ppc64_interrupt_controller == IC_PPC_XIC &&
-            xics_irq_8259_cascade != -1) {
-                if (request_irq(irq_offset_up(xics_irq_8259_cascade),
-                                no_action, 0, "8259 cascade", NULL))
-                        printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 "
-                                        "cascade\n");
-        }
-        return 0;
-}
-arch_initcall(xics_setup_i8259);
 
 #ifdef CONFIG_SMP
 void xics_request_IPIs(void)
 {
-        virt_irq_to_real_map[XICS_IPI] = XICS_IPI;
+        unsigned int ipi;
+
+        ipi = irq_create_mapping(xics_host, XICS_IPI, 0);
+        BUG_ON(ipi == NO_IRQ);
 
         /*
          * IPIs are marked IRQF_DISABLED as they must run with irqs
          * disabled
          */
-        request_irq(irq_offset_up(XICS_IPI), xics_ipi_action,
-                    IRQF_DISABLED, "IPI", NULL);
-        get_irq_desc(irq_offset_up(XICS_IPI))->status |= IRQ_PER_CPU;
-}
-#endif
-
-static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
-{
-        unsigned int irq;
-        int status;
-        int xics_status[2];
-        unsigned long newmask;
-        cpumask_t tmp = CPU_MASK_NONE;
-
-        irq = virt_irq_to_real(irq_offset_down(virq));
-        if (irq == XICS_IPI || irq == NO_IRQ)
-                return;
-
-        status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
-
-        if (status) {
-                printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
-                       "returns %d\n", irq, status);
-                return;
-        }
-
-        /* For the moment only implement delivery to all cpus or one cpu */
-        if (cpus_equal(cpumask, CPU_MASK_ALL)) {
-                newmask = default_distrib_server;
-        } else {
-                cpus_and(tmp, cpu_online_map, cpumask);
-                if (cpus_empty(tmp))
-                        return;
-                newmask = get_hard_smp_processor_id(first_cpu(tmp));
-        }
-
-        status = rtas_call(ibm_set_xive, 3, 1, NULL,
-                                irq, newmask, xics_status[1]);
-
-        if (status) {
-                printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
-                       "returns %d\n", irq, status);
-                return;
-        }
+        set_irq_handler(ipi, handle_percpu_irq);
+        if (firmware_has_feature(FW_FEATURE_LPAR))
+                request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED,
+                            "IPI", NULL);
+        else
+                request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED,
+                            "IPI", NULL);
 }
+#endif /* CONFIG_SMP */
 
 void xics_teardown_cpu(int secondary)
 {
         int cpu = smp_processor_id();
+        unsigned int ipi;
+        struct irq_desc *desc;
 
-        ops->cppr_info(cpu, 0x00);
-        iosync();
-
-        /* Clear IPI */
-        ops->qirr_info(cpu, 0xff);
+        xics_set_cpu_priority(cpu, 0);
 
         /*
          * we need to EOI the IPI if we got here from kexec down IPI
@@ -653,7 +789,13 @@ void xics_teardown_cpu(int secondary)
          * should we be flagging idle loop instead?
          * or creating some task to be scheduled?
          */
-        ops->xirr_info_set(cpu, XICS_IPI);
+
+        ipi = irq_find_mapping(xics_host, XICS_IPI);
+        if (ipi == XICS_IRQ_SPURIOUS)
+                return;
+        desc = get_irq_desc(ipi);
+        if (desc->chip && desc->chip->eoi)
+                desc->chip->eoi(XICS_IPI);
 
         /*
          * Some machines need to have at least one cpu in the GIQ,
@@ -661,8 +803,8 @@ void xics_teardown_cpu(int secondary)
          */
         if (secondary)
                 rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
-                        (1UL << interrupt_server_size) - 1 -
-                        default_distrib_server, 0);
+                                   (1UL << interrupt_server_size) - 1 -
+                                   default_distrib_server, 0);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -674,8 +816,7 @@ void xics_migrate_irqs_away(void)
         unsigned int irq, virq, cpu = smp_processor_id();
 
         /* Reject any interrupt that was queued to us... */
-        ops->cppr_info(cpu, 0);
-        iosync();
+        xics_set_cpu_priority(cpu, 0);
 
         /* remove ourselves from the global interrupt queue */
         status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
@@ -683,24 +824,23 @@ void xics_migrate_irqs_away(void)
         WARN_ON(status < 0);
 
         /* Allow IPIs again... */
-        ops->cppr_info(cpu, DEFAULT_PRIORITY);
-        iosync();
+        xics_set_cpu_priority(cpu, DEFAULT_PRIORITY);
 
         for_each_irq(virq) {
-                irq_desc_t *desc;
+                struct irq_desc *desc;
                 int xics_status[2];
                 unsigned long flags;
 
                 /* We cant set affinity on ISA interrupts */
-                if (virq < irq_offset_value())
+                if (virq < NUM_ISA_INTERRUPTS)
                         continue;
-
-                desc = get_irq_desc(virq);
-                irq = virt_irq_to_real(irq_offset_down(virq));
-
+                if (irq_map[virq].host != xics_host)
+                        continue;
+                irq = (unsigned int)irq_map[virq].hwirq;
                 /* We need to get IPIs still. */
-                if (irq == XICS_IPI || irq == NO_IRQ)
+                if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
                         continue;
+                desc = get_irq_desc(virq);
 
                 /* We only need to migrate enabled IRQS */
                 if (desc == NULL || desc->chip == NULL
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index e14c70868f1d..6ee1055b0ffb 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -14,13 +14,12 @@
 
 #include <linux/cache.h>
 
-void xics_init_IRQ(void);
-int xics_get_irq(struct pt_regs *);
-void xics_setup_cpu(void);
-void xics_teardown_cpu(int secondary);
-void xics_cause_IPI(int cpu);
-void xics_request_IPIs(void);
-void xics_migrate_irqs_away(void);
+extern void xics_init_IRQ(void);
+extern void xics_setup_cpu(void);
+extern void xics_teardown_cpu(int secondary);
+extern void xics_cause_IPI(int cpu);
+extern  void xics_request_IPIs(void);
+extern void xics_migrate_irqs_away(void);
 
 /* first argument is ignored for now*/
 void pSeriesLP_cppr_info(int n_cpu, u8 value);
@@ -31,4 +30,8 @@ struct xics_ipi_struct {
 
 extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
 
+struct irq_desc;
+extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc,
+                                 struct pt_regs *regs);
+
 #endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 054bd8b41ef5..cebfae242602 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,7 +4,6 @@ endif
 
 obj-$(CONFIG_MPIC)              += mpic.o
 obj-$(CONFIG_PPC_INDIRECT_PCI)  += indirect_pci.o
-obj-$(CONFIG_PPC_I8259)         += i8259.o
 obj-$(CONFIG_PPC_MPC106)        += grackle.o
 obj-$(CONFIG_BOOKE)             += dcr.o
 obj-$(CONFIG_40x)               += dcr.o
@@ -14,3 +13,7 @@ obj-$(CONFIG_PPC_83xx)		+= ipic.o
 obj-$(CONFIG_FSL_SOC)           += fsl_soc.o
 obj-$(CONFIG_PPC_TODC)          += todc.o
 obj-$(CONFIG_TSI108_BRIDGE)     += tsi108_pci.o tsi108_dev.o
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_PPC_I8259)         += i8259.o
+ endif
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 1a3ef1ab9d6e..72c73a6105cd 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -6,11 +6,16 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#undef DEBUG
+
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 #include <asm/i8259.h>
+#include <asm/prom.h>
 
 static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
 
@@ -20,7 +25,8 @@ static unsigned char cached_8259[2] = { 0xff, 0xff };
 
 static DEFINE_SPINLOCK(i8259_lock);
 
-static int i8259_pic_irq_offset;
+static struct device_node *i8259_node;
+static struct irq_host *i8259_host;
 
 /*
  * Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -28,16 +34,18 @@ static int i8259_pic_irq_offset;
  * which is called.  It should be noted that polling is broken on some
  * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
  */
-int i8259_irq(struct pt_regs *regs)
+unsigned int i8259_irq(struct pt_regs *regs)
 {
         int irq;
-
-        spin_lock(&i8259_lock);
+        int lock = 0;
 
         /* Either int-ack or poll for the IRQ */
         if (pci_intack)
                 irq = readb(pci_intack);
         else {
+                spin_lock(&i8259_lock);
+                lock = 1;
+
                 /* Perform an interrupt acknowledge cycle on controller 1. */
                 outb(0x0C, 0x20);               /* prepare for poll */
                 irq = inb(0x20) & 7;
@@ -62,16 +70,13 @@ int i8259_irq(struct pt_regs *regs)
                 if (!pci_intack)
                         outb(0x0B, 0x20);       /* ISR register */
                 if(~inb(0x20) & 0x80)
-                        irq = -1;
-        }
+                        irq = NO_IRQ;
+        } else if (irq == 0xff)
+                irq = NO_IRQ;
 
-        spin_unlock(&i8259_lock);
-        return irq + i8259_pic_irq_offset;
-}
-
-int i8259_irq_cascade(struct pt_regs *regs, void *unused)
-{
-        return i8259_irq(regs);
+        if (lock)
+                spin_unlock(&i8259_lock);
+        return irq;
 }
 
 static void i8259_mask_and_ack_irq(unsigned int irq_nr)
@@ -79,7 +84,6 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr)
         unsigned long flags;
 
         spin_lock_irqsave(&i8259_lock, flags);
-        irq_nr -= i8259_pic_irq_offset;
         if (irq_nr > 7) {
                 cached_A1 |= 1 << (irq_nr-8);
                 inb(0xA1);      /* DUMMY */
@@ -105,8 +109,9 @@ static void i8259_mask_irq(unsigned int irq_nr)
 {
         unsigned long flags;
 
+        pr_debug("i8259_mask_irq(%d)\n", irq_nr);
+
         spin_lock_irqsave(&i8259_lock, flags);
-        irq_nr -= i8259_pic_irq_offset;
         if (irq_nr < 8)
                 cached_21 |= 1 << irq_nr;
         else
@@ -119,8 +124,9 @@ static void i8259_unmask_irq(unsigned int irq_nr)
 {
         unsigned long flags;
 
+        pr_debug("i8259_unmask_irq(%d)\n", irq_nr);
+
         spin_lock_irqsave(&i8259_lock, flags);
-        irq_nr -= i8259_pic_irq_offset;
         if (irq_nr < 8)
                 cached_21 &= ~(1 << irq_nr);
         else
@@ -129,19 +135,11 @@ static void i8259_unmask_irq(unsigned int irq_nr)
         spin_unlock_irqrestore(&i8259_lock, flags);
 }
 
-static void i8259_end_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-            && irq_desc[irq].action)
-                i8259_unmask_irq(irq);
-}
-
-struct hw_interrupt_type i8259_pic = {
-        .typename = " i8259    ",
-        .enable = i8259_unmask_irq,
-        .disable = i8259_mask_irq,
-        .ack = i8259_mask_and_ack_irq,
-        .end = i8259_end_irq,
+static struct irq_chip i8259_pic = {
+        .typename       = " i8259    ",
+        .mask           = i8259_mask_irq,
+        .unmask         = i8259_unmask_irq,
+        .mask_ack       = i8259_mask_and_ack_irq,
 };
 
 static struct resource pic1_iores = {
@@ -165,25 +163,84 @@ static struct resource pic_edgectrl_iores = {
         .flags = IORESOURCE_BUSY,
 };
 
-static struct irqaction i8259_irqaction = {
-        .handler = no_action,
-        .flags = IRQF_DISABLED,
-        .mask = CPU_MASK_NONE,
-        .name = "82c59 secondary cascade",
+static int i8259_host_match(struct irq_host *h, struct device_node *node)
+{
+        return i8259_node == NULL || i8259_node == node;
+}
+
+static int i8259_host_map(struct irq_host *h, unsigned int virq,
+                          irq_hw_number_t hw, unsigned int flags)
+{
+        pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
+
+        /* We block the internal cascade */
+        if (hw == 2)
+                get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+
+        /* We use the level stuff only for now, we might want to
+         * be more cautious here but that works for now
+         */
+        get_irq_desc(virq)->status |= IRQ_LEVEL;
+        set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
+        return 0;
+}
+
+static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
+{
+        /* Make sure irq is masked in hardware */
+        i8259_mask_irq(virq);
+
+        /* remove chip and handler */
+        set_irq_chip_and_handler(virq, NULL, NULL);
+
+        /* Make sure it's completed */
+        synchronize_irq(virq);
+}
+
+static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
+                            u32 *intspec, unsigned int intsize,
+                            irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+        static unsigned char map_isa_senses[4] = {
+                IRQ_TYPE_LEVEL_LOW,
+                IRQ_TYPE_LEVEL_HIGH,
+                IRQ_TYPE_EDGE_FALLING,
+                IRQ_TYPE_EDGE_RISING,
+        };
+
+        *out_hwirq = intspec[0];
+        if (intsize > 1 && intspec[1] < 4)
+                *out_flags = map_isa_senses[intspec[1]];
+        else
+                *out_flags = IRQ_TYPE_NONE;
+
+        return 0;
+}
+
+static struct irq_host_ops i8259_host_ops = {
+        .match = i8259_host_match,
+        .map = i8259_host_map,
+        .unmap = i8259_host_unmap,
+        .xlate = i8259_host_xlate,
 };
 
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- *               the active irq from the 8259
+/****
+ * i8259_init - Initialize the legacy controller
+ * @node: device node of the legacy PIC (can be NULL, but then, it will match
+ *        all interrupts, so beware)
+ * @intack_addr: PCI interrupt acknowledge (real) address which will return
+ *               the active irq from the 8259
  */
-void __init i8259_init(unsigned long intack_addr, int offset)
+void i8259_init(struct device_node *node, unsigned long intack_addr)
 {
         unsigned long flags;
-        int i;
 
+        /* initialize the controller */
         spin_lock_irqsave(&i8259_lock, flags);
-        i8259_pic_irq_offset = offset;
+
+        /* Mask all first */
+        outb(0xff, 0xA1);
+        outb(0xff, 0x21);
 
         /* init master interrupt controller */
         outb(0x11, 0x20); /* Start init sequence */
@@ -197,21 +254,36 @@ void __init i8259_init(unsigned long intack_addr, int offset)
         outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
         outb(0x01, 0xA1); /* Select 8086 mode */
 
+        /* That thing is slow */
+        udelay(100);
+
         /* always read ISR */
         outb(0x0B, 0x20);
         outb(0x0B, 0xA0);
 
-        /* Mask all interrupts */
+        /* Unmask the internal cascade */
+        cached_21 &= ~(1 << 2);
+
+        /* Set interrupt masks */
         outb(cached_A1, 0xA1);
         outb(cached_21, 0x21);
 
         spin_unlock_irqrestore(&i8259_lock, flags);
 
-        for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
-                irq_desc[offset + i].chip = &i8259_pic;
+        /* create a legacy host */
+        if (node)
+                i8259_node = of_node_get(node);
+        i8259_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &i8259_host_ops, 0);
+        if (i8259_host == NULL) {
+                printk(KERN_ERR "i8259: failed to allocate irq host !\n");
+                return;
+        }
 
         /* reserve our resources */
-        setup_irq(offset + 2, &i8259_irqaction);
+        /* XXX should we continue doing that ? it seems to cause problems
+         * with further requesting of PCI IO resources for that range...
+         * need to look into it.
+         */
         request_resource(&ioport_resource, &pic1_iores);
         request_resource(&ioport_resource, &pic2_iores);
         request_resource(&ioport_resource, &pic_edgectrl_iores);
@@ -219,4 +291,5 @@ void __init i8259_init(unsigned long intack_addr, int offset)
         if (intack_addr != 0)
                 pci_intack = ioremap(intack_addr, 1);
 
+        printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
 }
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 7e469358895f..7d31d7cc392d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -100,8 +100,8 @@ static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg)
 
         if (mpic->flags & MPIC_PRIMARY)
                 cpu = hard_smp_processor_id();
-
-        return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg);
+        return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,
+                          mpic->cpuregs[cpu], reg);
 }
 
 static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value)
@@ -340,27 +340,19 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 #endif /* CONFIG_MPIC_BROKEN_U3 */
 
 
+#define mpic_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
+
 /* Find an mpic associated with a given linux interrupt */
 static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
 {
-        struct mpic *mpic = mpics;
-
-        while(mpic) {
-                /* search IPIs first since they may override the main interrupts */
-                if (irq >= mpic->ipi_offset && irq < (mpic->ipi_offset + 4)) {
-                        if (is_ipi)
-                                *is_ipi = 1;
-                        return mpic;
-                }
-                if (irq >= mpic->irq_offset &&
-                    irq < (mpic->irq_offset + mpic->irq_count)) {
-                        if (is_ipi)
-                                *is_ipi = 0;
-                        return mpic;
-                }
-                mpic = mpic -> next;
-        }
-        return NULL;
+        unsigned int src = mpic_irq_to_hw(irq);
+
+        if (irq < NUM_ISA_INTERRUPTS)
+                return NULL;
+        if (is_ipi)
+                *is_ipi = (src >= MPIC_VEC_IPI_0 && src <= MPIC_VEC_IPI_3);
+
+        return irq_desc[irq].chip_data;
 }
 
 /* Convert a cpu mask from logical to physical cpu numbers. */
@@ -378,14 +370,14 @@ static inline u32 mpic_physmask(u32 cpumask)
 /* Get the mpic structure from the IPI number */
 static inline struct mpic * mpic_from_ipi(unsigned int ipi)
 {
-        return container_of(irq_desc[ipi].chip, struct mpic, hc_ipi);
+        return irq_desc[ipi].chip_data;
 }
 #endif
 
 /* Get the mpic structure from the irq number */
 static inline struct mpic * mpic_from_irq(unsigned int irq)
 {
-        return container_of(irq_desc[irq].chip, struct mpic, hc_irq);
+        return irq_desc[irq].chip_data;
 }
 
 /* Send an EOI */
@@ -398,9 +390,7 @@ static inline void mpic_eoi(struct mpic *mpic)
 #ifdef CONFIG_SMP
 static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
 {
-        struct mpic *mpic = dev_id;
-
-        smp_message_recv(irq - mpic->ipi_offset, regs);
+        smp_message_recv(mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0, regs);
         return IRQ_HANDLED;
 }
 #endif /* CONFIG_SMP */
@@ -410,11 +400,11 @@ static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
  */
 
 
-static void mpic_enable_irq(unsigned int irq)
+static void mpic_unmask_irq(unsigned int irq)
 {
         unsigned int loops = 100000;
         struct mpic *mpic = mpic_from_irq(irq);
-        unsigned int src = irq - mpic->irq_offset;
+        unsigned int src = mpic_irq_to_hw(irq);
 
         DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
 
@@ -429,39 +419,13 @@ static void mpic_enable_irq(unsigned int irq)
                         break;
                 }
         } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);    
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-        if (mpic->flags & MPIC_BROKEN_U3) {
-                unsigned int src = irq - mpic->irq_offset;
-                if (mpic_is_ht_interrupt(mpic, src) &&
-                    (irq_desc[irq].status & IRQ_LEVEL))
-                        mpic_ht_end_irq(mpic, src);
-        }
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-}
-
-static unsigned int mpic_startup_irq(unsigned int irq)
-{
-#ifdef CONFIG_MPIC_BROKEN_U3
-        struct mpic *mpic = mpic_from_irq(irq);
-        unsigned int src = irq - mpic->irq_offset;
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-        mpic_enable_irq(irq);
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-        if (mpic_is_ht_interrupt(mpic, src))
-                mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-        return 0;
 }
 
-static void mpic_disable_irq(unsigned int irq)
+static void mpic_mask_irq(unsigned int irq)
 {
         unsigned int loops = 100000;
         struct mpic *mpic = mpic_from_irq(irq);
-        unsigned int src = irq - mpic->irq_offset;
+        unsigned int src = mpic_irq_to_hw(irq);
 
         DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
 
@@ -478,23 +442,58 @@ static void mpic_disable_irq(unsigned int irq)
         } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
 }
 
-static void mpic_shutdown_irq(unsigned int irq)
+static void mpic_end_irq(unsigned int irq)
 {
+        struct mpic *mpic = mpic_from_irq(irq);
+
+#ifdef DEBUG_IRQ
+        DBG("%s: end_irq: %d\n", mpic->name, irq);
+#endif
+        /* We always EOI on end_irq() even for edge interrupts since that
+         * should only lower the priority, the MPIC should have properly
+         * latched another edge interrupt coming in anyway
+         */
+
+        mpic_eoi(mpic);
+}
+
 #ifdef CONFIG_MPIC_BROKEN_U3
+
+static void mpic_unmask_ht_irq(unsigned int irq)
+{
         struct mpic *mpic = mpic_from_irq(irq);
-        unsigned int src = irq - mpic->irq_offset;
+        unsigned int src = mpic_irq_to_hw(irq);
 
-        if (mpic_is_ht_interrupt(mpic, src))
-                mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+        mpic_unmask_irq(irq);
 
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+        if (irq_desc[irq].status & IRQ_LEVEL)
+                mpic_ht_end_irq(mpic, src);
+}
+
+static unsigned int mpic_startup_ht_irq(unsigned int irq)
+{
+        struct mpic *mpic = mpic_from_irq(irq);
+        unsigned int src = mpic_irq_to_hw(irq);
+
+        mpic_unmask_irq(irq);
+        mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
 
-        mpic_disable_irq(irq);
+        return 0;
 }
 
-static void mpic_end_irq(unsigned int irq)
+static void mpic_shutdown_ht_irq(unsigned int irq)
 {
         struct mpic *mpic = mpic_from_irq(irq);
+        unsigned int src = mpic_irq_to_hw(irq);
+
+        mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+        mpic_mask_irq(irq);
+}
+
+static void mpic_end_ht_irq(unsigned int irq)
+{
+        struct mpic *mpic = mpic_from_irq(irq);
+        unsigned int src = mpic_irq_to_hw(irq);
 
 #ifdef DEBUG_IRQ
         DBG("%s: end_irq: %d\n", mpic->name, irq);
@@ -504,30 +503,25 @@ static void mpic_end_irq(unsigned int irq)
          * latched another edge interrupt coming in anyway
          */
 
-#ifdef CONFIG_MPIC_BROKEN_U3
-        if (mpic->flags & MPIC_BROKEN_U3) {
-                unsigned int src = irq - mpic->irq_offset;
-                if (mpic_is_ht_interrupt(mpic, src) &&
-                    (irq_desc[irq].status & IRQ_LEVEL))
-                        mpic_ht_end_irq(mpic, src);
-        }
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
+        if (irq_desc[irq].status & IRQ_LEVEL)
+                mpic_ht_end_irq(mpic, src);
         mpic_eoi(mpic);
 }
 
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
 #ifdef CONFIG_SMP
 
-static void mpic_enable_ipi(unsigned int irq)
+static void mpic_unmask_ipi(unsigned int irq)
 {
         struct mpic *mpic = mpic_from_ipi(irq);
-        unsigned int src = irq - mpic->ipi_offset;
+        unsigned int src = mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0;
 
         DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src);
         mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
 }
 
-static void mpic_disable_ipi(unsigned int irq)
+static void mpic_mask_ipi(unsigned int irq)
 {
         /* NEVER disable an IPI... that's just plain wrong! */
 }
@@ -551,29 +545,176 @@ static void mpic_end_ipi(unsigned int irq)
 static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
 {
         struct mpic *mpic = mpic_from_irq(irq);
+        unsigned int src = mpic_irq_to_hw(irq);
 
         cpumask_t tmp;
 
         cpus_and(tmp, cpumask, cpu_online_map);
 
-        mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION,
+        mpic_irq_write(src, MPIC_IRQ_DESTINATION,
                        mpic_physmask(cpus_addr(tmp)[0]));       
 }
 
+static unsigned int mpic_flags_to_vecpri(unsigned int flags, int *level)
+{
+        unsigned int vecpri;
+
+        /* Now convert sense value */
+        switch(flags & IRQ_TYPE_SENSE_MASK) {
+        case IRQ_TYPE_EDGE_RISING:
+                vecpri = MPIC_VECPRI_SENSE_EDGE |
+                        MPIC_VECPRI_POLARITY_POSITIVE;
+                *level = 0;
+                break;
+        case IRQ_TYPE_EDGE_FALLING:
+                vecpri = MPIC_VECPRI_SENSE_EDGE |
+                        MPIC_VECPRI_POLARITY_NEGATIVE;
+                *level = 0;
+                break;
+        case IRQ_TYPE_LEVEL_HIGH:
+                vecpri = MPIC_VECPRI_SENSE_LEVEL |
+                        MPIC_VECPRI_POLARITY_POSITIVE;
+                *level = 1;
+                break;
+        case IRQ_TYPE_LEVEL_LOW:
+        default:
+                vecpri = MPIC_VECPRI_SENSE_LEVEL |
+                        MPIC_VECPRI_POLARITY_NEGATIVE;
+                *level = 1;
+        }
+        return vecpri;
+}
+
+static struct irq_chip mpic_irq_chip = {
+        .mask   = mpic_mask_irq,
+        .unmask = mpic_unmask_irq,
+        .eoi    = mpic_end_irq,
+};
+
+#ifdef CONFIG_SMP
+static struct irq_chip mpic_ipi_chip = {
+        .mask   = mpic_mask_ipi,
+        .unmask = mpic_unmask_ipi,
+        .eoi    = mpic_end_ipi,
+};
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+static struct irq_chip mpic_irq_ht_chip = {
+        .startup        = mpic_startup_ht_irq,
+        .shutdown       = mpic_shutdown_ht_irq,
+        .mask           = mpic_mask_irq,
+        .unmask         = mpic_unmask_ht_irq,
+        .eoi            = mpic_end_ht_irq,
+};
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+
+static int mpic_host_match(struct irq_host *h, struct device_node *node)
+{
+        struct mpic *mpic = h->host_data;
+
+        /* Exact match, unless mpic node is NULL */
+        return mpic->of_node == NULL || mpic->of_node == node;
+}
+
+static int mpic_host_map(struct irq_host *h, unsigned int virq,
+                         irq_hw_number_t hw, unsigned int flags)
+{
+        struct irq_desc *desc = get_irq_desc(virq);
+        struct irq_chip *chip;
+        struct mpic *mpic = h->host_data;
+        unsigned int vecpri = MPIC_VECPRI_SENSE_LEVEL |
+                MPIC_VECPRI_POLARITY_NEGATIVE;
+        int level;
+
+        pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n",
+                 virq, hw, flags);
+
+        if (hw == MPIC_VEC_SPURRIOUS)
+                return -EINVAL;
+#ifdef CONFIG_SMP
+        else if (hw >= MPIC_VEC_IPI_0) {
+                WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+
+                pr_debug("mpic: mapping as IPI\n");
+                set_irq_chip_data(virq, mpic);
+                set_irq_chip_and_handler(virq, &mpic->hc_ipi,
+                                         handle_percpu_irq);
+                return 0;
+        }
+#endif /* CONFIG_SMP */
+
+        if (hw >= mpic->irq_count)
+                return -EINVAL;
+
+        /* If no sense provided, check default sense array */
+        if (((flags & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) &&
+            mpic->senses && hw < mpic->senses_count)
+                flags |= mpic->senses[hw];
+
+        vecpri = mpic_flags_to_vecpri(flags, &level);
+        if (level)
+                desc->status |= IRQ_LEVEL;
+        chip = &mpic->hc_irq;
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+        /* Check for HT interrupts, override vecpri */
+        if (mpic_is_ht_interrupt(mpic, hw)) {
+                vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
+                            MPIC_VECPRI_POLARITY_MASK);
+                vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+                chip = &mpic->hc_ht_irq;
+        }
+#endif
+
+        /* Reconfigure irq */
+        vecpri |= MPIC_VECPRI_MASK | hw | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
+        mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri);
+
+        pr_debug("mpic: mapping as IRQ\n");
+
+        set_irq_chip_data(virq, mpic);
+        set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq);
+        return 0;
+}
+
+static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
+                           u32 *intspec, unsigned int intsize,
+                           irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+        static unsigned char map_mpic_senses[4] = {
+                IRQ_TYPE_EDGE_RISING,
+                IRQ_TYPE_LEVEL_LOW,
+                IRQ_TYPE_LEVEL_HIGH,
+                IRQ_TYPE_EDGE_FALLING,
+        };
+
+        *out_hwirq = intspec[0];
+        if (intsize > 1 && intspec[1] < 4)
+                *out_flags = map_mpic_senses[intspec[1]];
+        else
+                *out_flags = IRQ_TYPE_NONE;
+
+        return 0;
+}
+
+static struct irq_host_ops mpic_host_ops = {
+        .match = mpic_host_match,
+        .map = mpic_host_map,
+        .xlate = mpic_host_xlate,
+};
 
 /*
  * Exported functions
  */
 
-
-struct mpic * __init mpic_alloc(unsigned long phys_addr,
+struct mpic * __init mpic_alloc(struct device_node *node,
+                                unsigned long phys_addr,
                                 unsigned int flags,
                                 unsigned int isu_size,
-                                unsigned int irq_offset,
                                 unsigned int irq_count,
-                                unsigned int ipi_offset,
-                                unsigned char *senses,
-                                unsigned int senses_count,
                                 const char *name)
 {
         struct mpic     *mpic;
@@ -585,33 +726,38 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
         if (mpic == NULL)
                 return NULL;
         
-
         memset(mpic, 0, sizeof(struct mpic));
         mpic->name = name;
+        mpic->of_node = node ? of_node_get(node) : NULL;
 
+        mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256,
+                                       &mpic_host_ops,
+                                       MPIC_VEC_SPURRIOUS);
+        if (mpic->irqhost == NULL) {
+                of_node_put(node);
+                return NULL;
+        }
+
+        mpic->irqhost->host_data = mpic;
+        mpic->hc_irq = mpic_irq_chip;
         mpic->hc_irq.typename = name;
-        mpic->hc_irq.startup = mpic_startup_irq;
-        mpic->hc_irq.shutdown = mpic_shutdown_irq;
-        mpic->hc_irq.enable = mpic_enable_irq;
-        mpic->hc_irq.disable = mpic_disable_irq;
-        mpic->hc_irq.end = mpic_end_irq;
         if (flags & MPIC_PRIMARY)
                 mpic->hc_irq.set_affinity = mpic_set_affinity;
+#ifdef CONFIG_MPIC_BROKEN_U3
+        mpic->hc_ht_irq = mpic_irq_ht_chip;
+        mpic->hc_ht_irq.typename = name;
+        if (flags & MPIC_PRIMARY)
+                mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
+#endif /* CONFIG_MPIC_BROKEN_U3 */
 #ifdef CONFIG_SMP
+        mpic->hc_ipi = mpic_ipi_chip;
         mpic->hc_ipi.typename = name;
-        mpic->hc_ipi.enable = mpic_enable_ipi;
-        mpic->hc_ipi.disable = mpic_disable_ipi;
-        mpic->hc_ipi.end = mpic_end_ipi;
 #endif /* CONFIG_SMP */
 
         mpic->flags = flags;
         mpic->isu_size = isu_size;
-        mpic->irq_offset = irq_offset;
         mpic->irq_count = irq_count;
-        mpic->ipi_offset = ipi_offset;
         mpic->num_sources = 0; /* so far */
-        mpic->senses = senses;
-        mpic->senses_count = senses_count;
 
         /* Map the global registers */
         mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
@@ -679,8 +825,10 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
         mpic->next = mpics;
         mpics = mpic;
 
-        if (flags & MPIC_PRIMARY)
+        if (flags & MPIC_PRIMARY) {
                 mpic_primary = mpic;
+                irq_set_default_host(mpic->irqhost);
+        }
 
         return mpic;
 }
@@ -697,26 +845,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
                 mpic->num_sources = isu_first + mpic->isu_size;
 }
 
-void __init mpic_setup_cascade(unsigned int irq, mpic_cascade_t handler,
-                               void *data)
+void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
 {
-        struct mpic *mpic = mpic_find(irq, NULL);
-        unsigned long flags;
-
-        /* Synchronization here is a bit dodgy, so don't try to replace cascade
-         * interrupts on the fly too often ... but normally it's set up at boot.
-         */
-        spin_lock_irqsave(&mpic_lock, flags);
-        if (mpic->cascade)             
-                mpic_disable_irq(mpic->cascade_vec + mpic->irq_offset);
-        mpic->cascade = NULL;
-        wmb();
-        mpic->cascade_vec = irq - mpic->irq_offset;
-        mpic->cascade_data = data;
-        wmb();
-        mpic->cascade = handler;
-        mpic_enable_irq(irq);
-        spin_unlock_irqrestore(&mpic_lock, flags);
+        mpic->senses = senses;
+        mpic->senses_count = count;
 }
 
 void __init mpic_init(struct mpic *mpic)
@@ -724,6 +856,11 @@ void __init mpic_init(struct mpic *mpic)
         int i;
 
         BUG_ON(mpic->num_sources == 0);
+        WARN_ON(mpic->num_sources > MPIC_VEC_IPI_0);
+
+        /* Sanitize source count */
+        if (mpic->num_sources > MPIC_VEC_IPI_0)
+                mpic->num_sources = MPIC_VEC_IPI_0;
 
         printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
 
@@ -747,12 +884,6 @@ void __init mpic_init(struct mpic *mpic)
                                MPIC_VECPRI_MASK |
                                (10 << MPIC_VECPRI_PRIORITY_SHIFT) |
                                (MPIC_VEC_IPI_0 + i));
-#ifdef CONFIG_SMP
-                if (!(mpic->flags & MPIC_PRIMARY))
-                        continue;
-                irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU;
-                irq_desc[mpic->ipi_offset+i].chip = &mpic->hc_ipi;
-#endif /* CONFIG_SMP */
         }
 
         /* Initialize interrupt sources */
@@ -763,31 +894,21 @@ void __init mpic_init(struct mpic *mpic)
         /* Do the HT PIC fixups on U3 broken mpic */
         DBG("MPIC flags: %x\n", mpic->flags);
         if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
-                mpic_scan_ht_pics(mpic);
+                mpic_scan_ht_pics(mpic);
 #endif /* CONFIG_MPIC_BROKEN_U3 */
 
         for (i = 0; i < mpic->num_sources; i++) {
                 /* start with vector = source number, and masked */
                 u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
-                int level = 0;
+                int level = 1;
                 
-                /* if it's an IPI, we skip it */
-                if ((mpic->irq_offset + i) >= (mpic->ipi_offset + i) &&
-                    (mpic->irq_offset + i) <  (mpic->ipi_offset + i + 4))
-                        continue;
-
                 /* do senses munging */
-                if (mpic->senses && i < mpic->senses_count) {
-                        if (mpic->senses[i] & IRQ_SENSE_LEVEL)
-                                vecpri |= MPIC_VECPRI_SENSE_LEVEL;
-                        if (mpic->senses[i] & IRQ_POLARITY_POSITIVE)
-                                vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
-                } else
+                if (mpic->senses && i < mpic->senses_count)
+                        vecpri = mpic_flags_to_vecpri(mpic->senses[i],
+                                                      &level);
+                else
                         vecpri |= MPIC_VECPRI_SENSE_LEVEL;
 
-                /* remember if it was a level interrupts */
-                level = (vecpri & MPIC_VECPRI_SENSE_LEVEL);
-
                 /* deal with broken U3 */
                 if (mpic->flags & MPIC_BROKEN_U3) {
 #ifdef CONFIG_MPIC_BROKEN_U3
@@ -808,12 +929,6 @@ void __init mpic_init(struct mpic *mpic)
                 mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
                 mpic_irq_write(i, MPIC_IRQ_DESTINATION,
                                1 << hard_smp_processor_id());
-
-                /* init linux descriptors */
-                if (i < mpic->irq_count) {
-                        irq_desc[mpic->irq_offset+i].status = level ? IRQ_LEVEL : 0;
-                        irq_desc[mpic->irq_offset+i].chip = &mpic->hc_irq;
-                }
         }
         
         /* Init spurrious vector */
@@ -854,19 +969,20 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 {
         int is_ipi;
         struct mpic *mpic = mpic_find(irq, &is_ipi);
+        unsigned int src = mpic_irq_to_hw(irq);
         unsigned long flags;
         u32 reg;
 
         spin_lock_irqsave(&mpic_lock, flags);
         if (is_ipi) {
-                reg = mpic_ipi_read(irq - mpic->ipi_offset) &
+                reg = mpic_ipi_read(src - MPIC_VEC_IPI_0) &
                         ~MPIC_VECPRI_PRIORITY_MASK;
-                mpic_ipi_write(irq - mpic->ipi_offset,
+                mpic_ipi_write(src - MPIC_VEC_IPI_0,
                                reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
         } else {
-                reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI)
+                reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI)
                         & ~MPIC_VECPRI_PRIORITY_MASK;
-                mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI,
+                mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
                                reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
         }
         spin_unlock_irqrestore(&mpic_lock, flags);
@@ -876,14 +992,15 @@ unsigned int mpic_irq_get_priority(unsigned int irq)
 {
         int is_ipi;
         struct mpic *mpic = mpic_find(irq, &is_ipi);
+        unsigned int src = mpic_irq_to_hw(irq);
         unsigned long flags;
         u32 reg;
 
         spin_lock_irqsave(&mpic_lock, flags);
         if (is_ipi)
-                reg = mpic_ipi_read(irq - mpic->ipi_offset);
+                reg = mpic_ipi_read(src = MPIC_VEC_IPI_0);
         else
-                reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI);
+                reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
         spin_unlock_irqrestore(&mpic_lock, flags);
         return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
 }
@@ -978,37 +1095,20 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
                        mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
 }
 
-int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
+unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
 {
-        u32 irq;
+        u32 src;
 
-        irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+        src = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
 #ifdef DEBUG_LOW
-        DBG("%s: get_one_irq(): %d\n", mpic->name, irq);
+        DBG("%s: get_one_irq(): %d\n", mpic->name, src);
 #endif
-        if (mpic->cascade && irq == mpic->cascade_vec) {
-#ifdef DEBUG_LOW
-                DBG("%s: cascading ...\n", mpic->name);
-#endif
-                irq = mpic->cascade(regs, mpic->cascade_data);
-                mpic_eoi(mpic);
-                return irq;
-        }
-        if (unlikely(irq == MPIC_VEC_SPURRIOUS))
-                return -1;
-        if (irq < MPIC_VEC_IPI_0) {
-#ifdef DEBUG_IRQ
-                DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset);
-#endif
-                return irq + mpic->irq_offset;
-        }
-#ifdef DEBUG_IPI
-        DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0);
-#endif
-        return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset;
+        if (unlikely(src == MPIC_VEC_SPURRIOUS))
+                return NO_IRQ;
+        return irq_linear_revmap(mpic->irqhost, src);
 }
 
-int mpic_get_irq(struct pt_regs *regs)
+unsigned int mpic_get_irq(struct pt_regs *regs)
 {
         struct mpic *mpic = mpic_primary;
 
@@ -1022,25 +1122,27 @@ int mpic_get_irq(struct pt_regs *regs)
 void mpic_request_ipis(void)
 {
         struct mpic *mpic = mpic_primary;
-
+        int i;
+        static char *ipi_names[] = {
+                "IPI0 (call function)",
+                "IPI1 (reschedule)",
+                "IPI2 (unused)",
+                "IPI3 (debugger break)",
+        };
         BUG_ON(mpic == NULL);
-        
-        printk("requesting IPIs ... \n");
 
-        /*
-         * IPIs are marked IRQF_DISABLED as they must run with irqs
-         * disabled
-         */
-        request_irq(mpic->ipi_offset+0, mpic_ipi_action, IRQF_DISABLED,
-                    "IPI0 (call function)", mpic);
-        request_irq(mpic->ipi_offset+1, mpic_ipi_action, IRQF_DISABLED,
-                   "IPI1 (reschedule)", mpic);
-        request_irq(mpic->ipi_offset+2, mpic_ipi_action, IRQF_DISABLED,
-                   "IPI2 (unused)", mpic);
-        request_irq(mpic->ipi_offset+3, mpic_ipi_action, IRQF_DISABLED,
-                   "IPI3 (debugger break)", mpic);
-
-        printk("IPIs requested... \n");
+        printk(KERN_INFO "mpic: requesting IPIs ... \n");
+
+        for (i = 0; i < 4; i++) {
+                unsigned int vipi = irq_create_mapping(mpic->irqhost,
+                                                       MPIC_VEC_IPI_0 + i, 0);
+                if (vipi == NO_IRQ) {
+                        printk(KERN_ERR "Failed to map IPI %d\n", i);
+                        break;
+                }
+                request_irq(vipi, mpic_ipi_action, IRQF_DISABLED,
+                            ipi_names[i], mpic);
+        }
 }
 
 void smp_mpic_message_pass(int target, int msg)
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 490749ca88f9..2497bbc07e76 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -104,3 +104,5 @@ obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
 ifeq ($(CONFIG_PPC_MPC52xx),y)
 obj-$(CONFIG_PCI)               += mpc52xx_pci.o
 endif
+
+obj-$(CONFIG_PPC_I8259)         += i8259.o
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
new file mode 100644
index 000000000000..eb35353af837
--- /dev/null
+++ b/arch/ppc/syslib/i8259.c
@@ -0,0 +1,212 @@
+/*
+ * i8259 interrupt controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+
+static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
+
+static unsigned char cached_8259[2] = { 0xff, 0xff };
+#define cached_A1 (cached_8259[0])
+#define cached_21 (cached_8259[1])
+
+static DEFINE_SPINLOCK(i8259_lock);
+
+static int i8259_pic_irq_offset;
+
+/*
+ * Acknowledge the IRQ using either the PCI host bridge's interrupt
+ * acknowledge feature or poll.  How i8259_init() is called determines
+ * which is called.  It should be noted that polling is broken on some
+ * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
+ */
+int i8259_irq(struct pt_regs *regs)
+{
+        int irq;
+
+        spin_lock(&i8259_lock);
+
+        /* Either int-ack or poll for the IRQ */
+        if (pci_intack)
+                irq = readb(pci_intack);
+        else {
+                /* Perform an interrupt acknowledge cycle on controller 1. */
+                outb(0x0C, 0x20);               /* prepare for poll */
+                irq = inb(0x20) & 7;
+                if (irq == 2 ) {
+                        /*
+                         * Interrupt is cascaded so perform interrupt
+                         * acknowledge on controller 2.
+                         */
+                        outb(0x0C, 0xA0);       /* prepare for poll */
+                        irq = (inb(0xA0) & 7) + 8;
+                }
+        }
+
+        if (irq == 7) {
+                /*
+                 * This may be a spurious interrupt.
+                 *
+                 * Read the interrupt status register (ISR). If the most
+                 * significant bit is not set then there is no valid
+                 * interrupt.
+                 */
+                if (!pci_intack)
+                        outb(0x0B, 0x20);       /* ISR register */
+                if(~inb(0x20) & 0x80)
+                        irq = -1;
+        }
+
+        spin_unlock(&i8259_lock);
+        return irq + i8259_pic_irq_offset;
+}
+
+static void i8259_mask_and_ack_irq(unsigned int irq_nr)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&i8259_lock, flags);
+        irq_nr -= i8259_pic_irq_offset;
+        if (irq_nr > 7) {
+                cached_A1 |= 1 << (irq_nr-8);
+                inb(0xA1);      /* DUMMY */
+                outb(cached_A1, 0xA1);
+                outb(0x20, 0xA0);       /* Non-specific EOI */
+                outb(0x20, 0x20);       /* Non-specific EOI to cascade */
+        } else {
+                cached_21 |= 1 << irq_nr;
+                inb(0x21);      /* DUMMY */
+                outb(cached_21, 0x21);
+                outb(0x20, 0x20);       /* Non-specific EOI */
+        }
+        spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_set_irq_mask(int irq_nr)
+{
+        outb(cached_A1,0xA1);
+        outb(cached_21,0x21);
+}
+
+static void i8259_mask_irq(unsigned int irq_nr)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&i8259_lock, flags);
+        irq_nr -= i8259_pic_irq_offset;
+        if (irq_nr < 8)
+                cached_21 |= 1 << irq_nr;
+        else
+                cached_A1 |= 1 << (irq_nr-8);
+        i8259_set_irq_mask(irq_nr);
+        spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_unmask_irq(unsigned int irq_nr)
+{
+        unsigned long flags;
+
+        spin_lock_irqsave(&i8259_lock, flags);
+        irq_nr -= i8259_pic_irq_offset;
+        if (irq_nr < 8)
+                cached_21 &= ~(1 << irq_nr);
+        else
+                cached_A1 &= ~(1 << (irq_nr-8));
+        i8259_set_irq_mask(irq_nr);
+        spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static struct irq_chip i8259_pic = {
+        .typename       = " i8259    ",
+        .mask           = i8259_mask_irq,
+        .unmask         = i8259_unmask_irq,
+        .mask_ack       = i8259_mask_and_ack_irq,
+};
+
+static struct resource pic1_iores = {
+        .name = "8259 (master)",
+        .start = 0x20,
+        .end = 0x21,
+        .flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic2_iores = {
+        .name = "8259 (slave)",
+        .start = 0xa0,
+        .end = 0xa1,
+        .flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic_edgectrl_iores = {
+        .name = "8259 edge control",
+        .start = 0x4d0,
+        .end = 0x4d1,
+        .flags = IORESOURCE_BUSY,
+};
+
+static struct irqaction i8259_irqaction = {
+        .handler = no_action,
+        .flags = SA_INTERRUPT,
+        .mask = CPU_MASK_NONE,
+        .name = "82c59 secondary cascade",
+};
+
+/*
+ * i8259_init()
+ * intack_addr - PCI interrupt acknowledge (real) address which will return
+ *               the active irq from the 8259
+ */
+void __init i8259_init(unsigned long intack_addr, int offset)
+{
+        unsigned long flags;
+        int i;
+
+        spin_lock_irqsave(&i8259_lock, flags);
+        i8259_pic_irq_offset = offset;
+
+        /* init master interrupt controller */
+        outb(0x11, 0x20); /* Start init sequence */
+        outb(0x00, 0x21); /* Vector base */
+        outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
+        outb(0x01, 0x21); /* Select 8086 mode */
+
+        /* init slave interrupt controller */
+        outb(0x11, 0xA0); /* Start init sequence */
+        outb(0x08, 0xA1); /* Vector base */
+        outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
+        outb(0x01, 0xA1); /* Select 8086 mode */
+
+        /* always read ISR */
+        outb(0x0B, 0x20);
+        outb(0x0B, 0xA0);
+
+        /* Mask all interrupts */
+        outb(cached_A1, 0xA1);
+        outb(cached_21, 0x21);
+
+        spin_unlock_irqrestore(&i8259_lock, flags);
+
+        for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
+                set_irq_chip_and_handler(offset + i, &i8259_pic,
+                                         handle_level_irq);
+                irq_desc[offset + i].status |= IRQ_LEVEL;
+        }
+
+        /* reserve our resources */
+        setup_irq(offset + 2, &i8259_irqaction);
+        request_resource(&ioport_resource, &pic1_iores);
+        request_resource(&ioport_resource, &pic2_iores);
+        request_resource(&ioport_resource, &pic_edgectrl_iores);
+
+        if (intack_addr != 0)
+                pci_intack = ioremap(intack_addr, 1);
+
+}