1 files changed, 20 insertions, 20 deletions

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a9e32066a54a..ca209c443f34 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -221,26 +221,6 @@ static struct platform_device sa1111_device = {
         .resource       = sa1111_resources,
 };
 
-static struct resource smc91x_resources[] = {
-        [0] = {
-                .name   = "smc91x-regs",
-                .start  = 0x0c000c00,
-                .end    = 0x0c0fffff,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = LUBBOCK_ETH_IRQ,
-                .end    = LUBBOCK_ETH_IRQ,
-                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-        },
-        [2] = {
-                .name   = "smc91x-attrib",
-                .start  = 0x0e000000,
-                .end    = 0x0e0fffff,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
  * you can select it to replace the ucb1400 by switching the touchscreen cable
  * (to J5) and poking board registers (as done below).  Else it's only useful
@@ -296,6 +276,26 @@ static struct spi_board_info spi_board_info[] __initdata = { {
 },
 };
 
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .name   = "smc91x-regs",
+                .start  = 0x0c000c00,
+                .end    = 0x0c0fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = LUBBOCK_ETH_IRQ,
+                .end    = LUBBOCK_ETH_IRQ,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        },
+        [2] = {
+                .name   = "smc91x-attrib",
+                .start  = 0x0e000000,
+                .end    = 0x0e0fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = -1,