82 files changed, 2379 insertions, 1318 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 29b85e6bd71d..d7d7c2fc5388 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -926,6 +926,7 @@ config ARCH_DAVINCI
         select GENERIC_IRQ_CHIP
         select HAVE_IDE
         select NEED_MACH_GPIO_H
+        select USE_OF
         select ZONE_DMA
         help
           Support for TI's DaVinci platform.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 42917866fcde..f3f2f80cdf3b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -55,11 +55,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
         kirkwood-ib62x0.dtb \
         kirkwood-iconnect.dtb \
         kirkwood-iomega_ix2_200.dtb \
+        kirkwood-is2.dtb \
         kirkwood-km_kirkwood.dtb \
         kirkwood-lschlv2.dtb \
         kirkwood-lsxhl.dtb \
+        kirkwood-mplcec4.dtb \
+        kirkwood-ns2.dtb \
+        kirkwood-ns2lite.dtb \
+        kirkwood-ns2max.dtb \
+        kirkwood-ns2mini.dtb \
+        kirkwood-nsa310.dtb \
+        kirkwood-topkick.dtb \
         kirkwood-ts219-6281.dtb \
-        kirkwood-ts219-6282.dtb
+        kirkwood-ts219-6282.dtb \
+        kirkwood-openblocks_a6.dtb
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
         msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
@@ -94,11 +103,13 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
         am335x-evm.dtb \
         am335x-evmsk.dtb \
         am335x-bone.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
         r8a7740-armadillo800eva.dtb \
-        sh73a0-kzm9g.dtb
+        sh73a0-kzm9g.dtb \
+        sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
         spear1340-evb.dtb
 dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
new file mode 100644
index 000000000000..422fdb3fcfc1
--- /dev/null
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -0,0 +1,30 @@
+/*
+ * Device Tree for AM1808 EnBW CMC board
+ *
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+/include/ "da850.dtsi"
+
+/ {
+        compatible = "enbw,cmc", "ti,da850";
+        model = "EnBW CMC";
+
+        soc {
+                serial0: serial@1c42000 {
+                        status = "okay";
+                };
+                serial1: serial@1d0c000 {
+                        status = "okay";
+                };
+                serial2: serial@1d0d000 {
+                        status = "okay";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
new file mode 100644
index 000000000000..37dc5a3243b8
--- /dev/null
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -0,0 +1,28 @@
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+/dts-v1/;
+/include/ "da850.dtsi"
+
+/ {
+        compatible = "ti,da850-evm", "ti,da850";
+        model = "DA850/AM1808/OMAP-L138 EVM";
+
+        soc {
+                serial0: serial@1c42000 {
+                        status = "okay";
+                };
+                serial1: serial@1d0c000 {
+                        status = "okay";
+                };
+                serial2: serial@1d0d000 {
+                        status = "okay";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
new file mode 100644
index 000000000000..640ab75c20db
--- /dev/null
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+        arm {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+                intc: interrupt-controller {
+                        compatible = "ti,cp-intc";
+                        interrupt-controller;
+                        #interrupt-cells = <1>;
+                        ti,intc-size = <100>;
+                        reg = <0xfffee000 0x2000>;
+                };
+        };
+        soc {
+                compatible = "simple-bus";
+                model = "da850";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0x0 0x01c00000 0x400000>;
+
+                serial0: serial@1c42000 {
+                        compatible = "ns16550a";
+                        reg = <0x42000 0x100>;
+                        clock-frequency = <150000000>;
+                        reg-shift = <2>;
+                        interrupts = <25>;
+                        interrupt-parent = <&intc>;
+                        status = "disabled";
+                };
+                serial1: serial@1d0c000 {
+                        compatible = "ns16550a";
+                        reg = <0x10c000 0x100>;
+                        clock-frequency = <150000000>;
+                        reg-shift = <2>;
+                        interrupts = <53>;
+                        interrupt-parent = <&intc>;
+                        status = "disabled";
+                };
+                serial2: serial@1d0d000 {
+                        compatible = "ns16550a";
+                        reg = <0x10d000 0x100>;
+                        clock-frequency = <150000000>;
+                        reg-shift = <2>;
+                        interrupts = <61>;
+                        interrupt-parent = <&intc>;
+                        status = "disabled";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
new file mode 100644
index 000000000000..0bdce0ad7277
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+        model = "LaCie Internet Space v2";
+        compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x8000000>;
+        };
+
+        ocp@f1000000 {
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <1>;
+                };
+        };
+
+        ns2-leds {
+                compatible = "lacie,ns2-leds";
+
+                blue-sata {
+                        label = "ns2:blue:sata";
+                        slow-gpio = <&gpio0 29 0>;
+                        cmd-gpio = <&gpio0 30 0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 8fea375c734d..798e60eeedf3 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -94,4 +94,15 @@
                         gpios = <&gpio1 16 1>;
                 };
         };
+
+        gpio_fan {
+                compatible = "gpio-fan";
+                gpios = <&gpio0 19 1
+                         &gpio0 18 1>;
+                gpio-fan,speed-map = <0    3
+                                      1500 2
+                                      3250 1
+                                      5000 0>;
+                alarm-gpios = <&gpio1 8 0>;
+        };
 };
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
new file mode 100644
index 000000000000..ac3c080bed21
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -0,0 +1,119 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+        model = "MPL CEC4";
+        compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+        ocp@f1000000 {
+                i2c@11000 {
+                        status = "okay";
+
+                        rtc@51 {
+                                compatible = "nxp,pcf8563";
+                                reg = <0x51>;
+                        };
+
+                        eeprom@57 {
+                                compatible = "atmel,24c02";
+                                reg = <0x57>;
+                        };
+
+                };
+
+                serial@12000 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
+
+                nand@3000000 {
+                        status = "okay";
+
+                        partition@0 {
+                                label = "uboot";
+                                reg = <0x0000000 0x100000>;
+                        };
+
+                        partition@100000 {
+                                label = "env";
+                                reg = <0x100000 0x80000>;
+                        };
+
+                        partition@180000 {
+                                label = "fdt";
+                                reg = <0x180000 0x80000>;
+                        };
+
+                        partition@200000 {
+                                label = "kernel";
+                                reg = <0x200000 0x400000>;
+                        };
+
+                        partition@600000 {
+                                label = "rootfs";
+                                reg = <0x600000 0x1fa00000>;
+                        };
+                };
+
+                rtc@10300 {
+                        status = "disabled";
+                };
+
+                sata@80000 {
+                        nr-ports = <2>;
+                        status = "okay";
+
+                };
+        };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                health {
+                        label = "status:green:health";
+                        gpios = <&gpio0 7 1>;
+                };
+
+                user1o {
+                        label = "user1:orange";
+                        gpios = <&gpio1 8 1>;
+                        default-state = "on";
+                };
+
+                user1g {
+                        label = "user1:green";
+                        gpios = <&gpio1 9 1>;
+                        default-state = "on";
+                };
+
+                user0o {
+                        label = "user0:orange";
+                        gpios = <&gpio1 12 1>;
+                        default-state = "on";
+                };
+
+                user0g {
+                        label = "user0:green";
+                        gpios = <&gpio1 13 1>;
+                        default-state = "on";
+                };
+
+                misc {
+                        label = "status:orange:misc";
+                        gpios = <&gpio1 14 1>;
+                        default-state = "on";
+                };
+
+        };
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
new file mode 100644
index 000000000000..9bc6785ad228
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -0,0 +1,63 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+        chosen {
+                bootargs = "console=ttyS0,115200n8";
+        };
+
+        ocp@f1000000 {
+                serial@12000 {
+                        clock-frequency = <166666667>;
+                        status = "okay";
+                };
+
+                spi@10600 {
+                        status = "okay";
+
+                        flash@0 {
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                compatible = "mx25l4005a";
+                                reg = <0>;
+                                spi-max-frequency = <20000000>;
+                                mode = <0>;
+
+                                partition@0 {
+                                        reg = <0x0 0x80000>;
+                                        label = "u-boot";
+                                };
+                        };
+                };
+
+                i2c@11000 {
+                        status = "okay";
+
+                        eeprom@50 {
+                                compatible = "at,24c04";
+                                pagesize = <16>;
+                                reg = <0x50>;
+                        };
+                };
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                button@1 {
+                        label = "Power push button";
+                        linux,code = <116>;
+                        gpios = <&gpio1 0 0>;
+                };
+        };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                red-fail {
+                        label = "ns2:red:fail";
+                        gpios = <&gpio0 12 0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
new file mode 100644
index 000000000000..f2d36ecf36d8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+        model = "LaCie Network Space v2";
+        compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x10000000>;
+        };
+
+        ocp@f1000000 {
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <1>;
+                };
+        };
+
+        ns2-leds {
+                compatible = "lacie,ns2-leds";
+
+                blue-sata {
+                        label = "ns2:blue:sata";
+                        slow-gpio = <&gpio0 29 0>;
+                        cmd-gpio = <&gpio0 30 0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
new file mode 100644
index 000000000000..b02eb4ea1bb4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+        model = "LaCie Network Space Lite v2";
+        compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x8000000>;
+        };
+
+        ocp@f1000000 {
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <1>;
+                };
+        };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                blue-sata {
+                        label = "ns2:blue:sata";
+                        gpios = <&gpio0 30 1>;
+                        linux,default-trigger = "default-on";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
new file mode 100644
index 000000000000..bcec4d6cada7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -0,0 +1,49 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+        model = "LaCie Network Space Max v2";
+        compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x10000000>;
+        };
+
+        ocp@f1000000 {
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <2>;
+                };
+        };
+
+        gpio_fan {
+                compatible = "gpio-fan";
+                gpios = <&gpio0 22 1
+                         &gpio0  7 1
+                         &gpio1  1 1
+                         &gpio0 23 1>;
+                gpio-fan,speed-map =
+                        <   0  0
+                         1500 15
+                         1700 14
+                         1800 13
+                         2100 12
+                         3100 11
+                         3300 10
+                         4300  9
+                         5500  8>;
+                alarm-gpios = <&gpio0 25 1>;
+        };
+
+        ns2-leds {
+                compatible = "lacie,ns2-leds";
+
+                blue-sata {
+                        label = "ns2:blue:sata";
+                        slow-gpio = <&gpio0 29 0>;
+                        cmd-gpio = <&gpio0 30 0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
new file mode 100644
index 000000000000..b79f5eb25589
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -0,0 +1,49 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+        model = "LaCie Network Space Mini v2";
+        compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x8000000>;
+        };
+
+        ocp@f1000000 {
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <1>;
+                };
+        };
+
+        gpio_fan {
+                compatible = "gpio-fan";
+                gpios = <&gpio0 22 1
+                         &gpio0  7 1
+                         &gpio1  1 1
+                         &gpio0 23 1>;
+                gpio-fan,speed-map =
+                        <   0  0
+                         3000 15
+                         3180 14
+                         4140 13
+                         4570 12
+                         6760 11
+                         7140 10
+                         7980  9
+                         9200  8>;
+                alarm-gpios = <&gpio0 25 1>;
+        };
+
+        ns2-leds {
+                compatible = "lacie,ns2-leds";
+
+                blue-sata {
+                        label = "ns2:blue:sata";
+                        slow-gpio = <&gpio0 29 0>;
+                        cmd-gpio = <&gpio0 30 0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
new file mode 100644
index 000000000000..5509f9659546
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -0,0 +1,144 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+        model = "ZyXEL NSA310";
+        compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x10000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200";
+        };
+
+        ocp@f1000000 {
+
+                serial@12000 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
+
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <2>;
+                };
+
+                i2c@11000 {
+                        status = "okay";
+                };
+
+                nand@3000000 {
+                        status = "okay";
+                        chip-delay = <35>;
+
+                        partition@0 {
+                                label = "uboot";
+                                reg = <0x0000000 0x0100000>;
+                                read-only;
+                        };
+                        partition@100000 {
+                                label = "uboot_env";
+                                reg = <0x0100000 0x0080000>;
+                        };
+                        partition@180000 {
+                                label = "key_store";
+                                reg = <0x0180000 0x0080000>;
+                        };
+                        partition@200000 {
+                                label = "info";
+                                reg = <0x0200000 0x0080000>;
+                        };
+                        partition@280000 {
+                                label = "etc";
+                                reg = <0x0280000 0x0a00000>;
+                        };
+                        partition@c80000 {
+                                label = "kernel_1";
+                                reg = <0x0c80000 0x0a00000>;
+                        };
+                        partition@1680000 {
+                                label = "rootfs1";
+                                reg = <0x1680000 0x2fc0000>;
+                        };
+                        partition@4640000 {
+                                label = "kernel_2";
+                                reg = <0x4640000 0x0a00000>;
+                        };
+                        partition@5040000 {
+                                label = "rootfs2";
+                                reg = <0x5040000 0x2fc0000>;
+                        };
+                };
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                button@1 {
+                        label = "Power Button";
+                        linux,code = <116>;
+                        gpios = <&gpio1 14 0>;
+                };
+                button@2 {
+                        label = "Copy Button";
+                        linux,code = <133>;
+                        gpios = <&gpio1 5 1>;
+                };
+                button@3 {
+                        label = "Reset Button";
+                        linux,code = <0x198>;
+                        gpios = <&gpio1 4 1>;
+                };
+        };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                green-sys {
+                        label = "nsa310:green:sys";
+                        gpios = <&gpio0 28 0>;
+                };
+                red-sys {
+                        label = "nsa310:red:sys";
+                        gpios = <&gpio0 29 0>;
+                };
+                green-hdd {
+                        label = "nsa310:green:hdd";
+                        gpios = <&gpio1 9 0>;
+                };
+                red-hdd {
+                        label = "nsa310:red:hdd";
+                        gpios = <&gpio1 10 0>;
+                };
+                green-esata {
+                        label = "nsa310:green:esata";
+                        gpios = <&gpio0 12 0>;
+                };
+                red-esata {
+                        label = "nsa310:red:esata";
+                        gpios = <&gpio0 13 0>;
+                };
+                green-usb {
+                        label = "nsa310:green:usb";
+                        gpios = <&gpio0 15 0>;
+                };
+                red-usb {
+                        label = "nsa310:red:usb";
+                        gpios = <&gpio0 16 0>;
+                };
+                green-copy {
+                        label = "nsa310:green:copy";
+                        gpios = <&gpio1 7 0>;
+                };
+                red-copy {
+                        label = "nsa310:red:copy";
+                        gpios = <&gpio1 8 0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
new file mode 100644
index 000000000000..9a2606c8b78f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -0,0 +1,39 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+        model = "Plat'Home OpenBlocksA6";
+        compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+        ocp@f1000000 {
+                serial@12000 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
+
+                serial@12100 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
+
+                nand@3000000 {
+                        chip-delay = <25>;
+                        status = "okay";
+                };
+
+                sata@80000 {
+                        nr-ports = <1>;
+                        status = "okay";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
new file mode 100644
index 000000000000..c0de5a7f660d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -0,0 +1,85 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+        model = "Univeral Scientific Industrial Co. Topkick-1281P2";
+        compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x10000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+        ocp@f1000000 {
+                serial@12000 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
+
+                nand@3000000 {
+                        status = "okay";
+
+                        partition@0 {
+                                label = "u-boot";
+                                reg = <0x0000000 0x180000>;
+                        };
+
+                        partition@180000 {
+                                label = "u-boot env";
+                                reg = <0x0180000 0x20000>;
+                        };
+
+                        partition@200000 {
+                                label = "uImage";
+                                reg = <0x0200000 0x600000>;
+                        };
+
+                        partition@800000 {
+                                label = "uInitrd";
+                                reg = <0x0800000 0x1000000>;
+                        };
+
+                        partition@1800000 {
+                                label = "rootfs";
+                                reg = <0x1800000 0xe800000>;
+                        };
+                };
+
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <1>;
+                };
+        };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                disk {
+                        label = "topkick:yellow:disk";
+                        gpios = <&gpio0 21 1>;
+                        linux,default-trigger = "ide-disk";
+                };
+                system2 {
+                        label = "topkick:red:system";
+                        gpios = <&gpio1 5 1>;
+                };
+                system {
+                        label = "topkick:blue:system";
+                        gpios = <&gpio1 6 1>;
+                        default-state = "on";
+                };
+                wifi {
+                        label = "topkick:green:wifi";
+                        gpios = <&gpio1 7 1>;
+                };
+                wifi2 {
+                        label = "topkick:yellow:wifi";
+                        gpios = <&gpio1 16 1>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
new file mode 100644
index 000000000000..5a3a58b7e18f
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "orion5x.dtsi"
+
+/ {
+        model = "LaCie Ethernet Disk mini V2";
+        compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+
+        memory {
+                reg = <0x00000000 0x4000000>; /* 64 MB */
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+        ocp@f1000000 {
+                serial@12000 {
+                        clock-frequency = <166666667>;
+                        status = "okay";
+                };
+
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <2>;
+                };
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                button@1 {
+                        label = "Power-on Switch";
+                        linux,code = <116>; /* KEY_POWER */
+                        gpios = <&gpio0 18 0>;
+                };
+        };
+
+        gpio_leds {
+                compatible = "gpio-leds";
+
+                led@1 {
+                        label = "power:blue";
+                        gpios = <&gpio0 16 1>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
new file mode 100644
index 000000000000..8aad00f81ed9
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        model = "Marvell Orion5x SoC";
+        compatible = "marvell,orion5x";
+        interrupt-parent = <&intc>;
+
+        intc: interrupt-controller {
+                compatible = "marvell,orion-intc", "marvell,intc";
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                reg = <0xf1020204 0x04>;
+        };
+
+        ocp@f1000000 {
+                compatible = "simple-bus";
+                ranges = <0x00000000 0xf1000000 0x4000000
+                          0xf2200000 0xf2200000 0x0000800>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                gpio0: gpio@10100 {
+                        compatible = "marvell,orion-gpio";
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        reg = <0x10100 0x40>;
+                        ngpio = <32>;
+                        interrupts = <6>, <7>, <8>, <9>;
+                };
+
+                serial@12000 {
+                        compatible = "ns16550a";
+                        reg = <0x12000 0x100>;
+                        reg-shift = <2>;
+                        interrupts = <3>;
+                        /* set clock-frequency in board dts */
+                        status = "disabled";
+                };
+
+                serial@12100 {
+                        compatible = "ns16550a";
+                        reg = <0x12100 0x100>;
+                        reg-shift = <2>;
+                        interrupts = <4>;
+                        /* set clock-frequency in board dts */
+                        status = "disabled";
+                };
+
+                spi@10600 {
+                        compatible = "marvell,orion-spi";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        cell-index = <0>;
+                        reg = <0x10600 0x28>;
+                        status = "disabled";
+                };
+
+                wdt@20300 {
+                        compatible = "marvell,orion-wdt";
+                        reg = <0x20300 0x28>;
+                        status = "okay";
+                };
+
+                sata@80000 {
+                        compatible = "marvell,orion-sata";
+                        reg = <0x80000 0x5000>;
+                        interrupts = <29>;
+                        status = "disabled";
+                };
+
+                i2c@11000 {
+                        compatible = "marvell,mv64xxx-i2c";
+                        reg = <0x11000 0x20>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        interrupts = <5>;
+                        clock-frequency = <100000>;
+                        status = "disabled";
+                };
+
+                crypto@90000 {
+                        compatible = "marvell,orion-crypto";
+                        reg = <0x90000 0x10000>,
+                              <0xf2200000 0x800>;
+                        reg-names = "regs", "sram";
+                        interrupts = <22>;
+                        status = "okay";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts
new file mode 100644
index 000000000000..286f0caef013
--- /dev/null
+++ b/arch/arm/boot/dts/sh7372-mackerel.dts
@@ -0,0 +1,22 @@
+/*
+ * Device Tree Source for the mackerel board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+        model = "Mackerel (AP4 EVM 2nd)";
+        compatible = "renesas,mackerel";
+
+        memory {
+                device_type = "memory";
+                reg = <0x40000000 0x10000000>;
+        };
+};
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
index 2eef85e3c9b9..66894f736d04 100644
--- a/arch/arm/configs/ap4evb_defconfig
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -46,7 +46,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 3d764072dd54..2e1a82577207 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -21,7 +21,7 @@ CONFIG_MACH_ARMADILLO800EVA=y
 # CONFIG_SH_TIMER_TMU is not set
 CONFIG_ARM_THUMB=y
 CONFIG_CPU_BPREDICT_DISABLE=y
-# CONFIG_CACHE_L2X0 is not set
+CONFIG_CACHE_L2X0=y
 CONFIG_ARM_ERRATA_430973=y
 CONFIG_ARM_ERRATA_458693=y
 CONFIG_ARM_ERRATA_460075=y
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 88ccde058ba4..f29223954af8 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -17,6 +17,7 @@ CONFIG_MODVERSIONS=y
 CONFIG_ARCH_DAVINCI=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_MACH_DA8XX_DT=y
 CONFIG_MACH_MITYOMAPL138=y
 CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
@@ -26,6 +27,7 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_LEDS=y
+CONFIG_USE_OF=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_FREQ=y
@@ -75,6 +77,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 40db34cf2771..0b7ee92c5713 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
+CONFIG_MACH_CM_A510=y
+CONFIG_MACH_DOVE_DT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_HIGHMEM=y
+CONFIG_USE_OF=y
+CONFIG_ATAGS=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_DOVE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
@@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
deleted file mode 100644
index 4a336ab5a0c0..000000000000
--- a/arch/arm/configs/g3evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7367=y
-CONFIG_MACH_G3EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
deleted file mode 100644
index 21c6d0307bc3..000000000000
--- a/arch/arm/configs/g4evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7377=y
-CONFIG_MACH_G4EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index f71302c3ac33..ebbfb27e0e74 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -123,6 +123,7 @@ CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX2=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 44f117aab52c..69667133321f 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -145,15 +145,18 @@ CONFIG_GPIO_MC9S08DZ60=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
+CONFIG_MFD_DA9052_I2C=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX3=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 74eee0c78f28..93f3794ba5cb 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y
 CONFIG_MACH_LSXL_DT=y
 CONFIG_MACH_IOMEGA_IX2_200_DT=y
 CONFIG_MACH_KM_KIRKWOOD_DT=y
+CONFIG_MACH_INETSPACE_V2_DT=y
+CONFIG_MACH_MPLCEC4_DT=y
+CONFIG_MACH_NETSPACE_V2_DT=y
+CONFIG_MACH_NETSPACE_MAX_V2_DT=y
+CONFIG_MACH_NETSPACE_LITE_V2_DT=y
+CONFIG_MACH_NETSPACE_MINI_V2_DT=y
+CONFIG_MACH_OPENBLOCKS_A6_DT=y
+CONFIG_MACH_TOPKICK_DT=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_DOCKSTAR=y
@@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y
 CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
 CONFIG_MACH_T5325=y
+CONFIG_MACH_NSA310_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig
index b7735d6347ac..fa83db1ef0eb 100644
--- a/arch/arm/configs/kota2_defconfig
+++ b/arch/arm/configs/kota2_defconfig
@@ -112,7 +112,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_RENESAS_TPU=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index c88b57886e79..afbae287436b 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ST1232=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=9
@@ -119,8 +121,9 @@ CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_ASYNC_TX_DMA=y
 CONFIG_STAGING=y
+CONFIG_SENSORS_AK8975=y
+CONFIG_IIO=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY_USER=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
index 306a2e2d3622..2098ce155542 100644
--- a/arch/arm/configs/mackerel_defconfig
+++ b/arch/arm/configs/mackerel_defconfig
@@ -70,17 +70,31 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_HWMON is not set
 # CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC_SH4_FSI=y
+CONFIG_USB=y
+CONFIG_USB_RENESAS_USBHS_HCD=y
+CONFIG_USB_RENESAS_USBHS=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -91,7 +105,6 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index f79b55c512d0..5b8215f424c5 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -71,6 +71,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index cd5e6ba9a54d..952430d9e2d9 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,8 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
@@ -10,6 +11,8 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
 CONFIG_ARCH_ORION5X=y
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
@@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_EDMINI_V2_DT=y
 CONFIG_MACH_D2NET=y
 CONFIG_MACH_BIGDISK=y
 CONFIG_MACH_NET2BIG=y
@@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
-# CONFIG_SUSPEND is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_NET_PCI=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
+CONFIG_MARVELL_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
@@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_LM75=y
 # CONFIG_VGA_ARB is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -150,25 +143,18 @@ CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index f8eecb959413..0153950f6068 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X
 
 comment "DaVinci Board Type"
 
+config MACH_DA8XX_DT
+        bool "Support DA8XX platforms using device tree"
+        default y
+        depends on ARCH_DAVINCI_DA8XX
+        help
+          Say y here to include support for TI DaVinci DA850 based using
+          Flattened Device Tree. More information at Documentation/devicetree
+
 config MACH_DAVINCI_EVM
         bool "TI DM644x EVM"
         default ARCH_DAVINCI_DM644x
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2227effcb0e9..fb5c1aa98a63 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)                   += cp_intc.o
 
 # Board specific
+obj-$(CONFIG_MACH_DA8XX_DT)             += da8xx-dt.o
 obj-$(CONFIG_MACH_DAVINCI_EVM)          += board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)               += board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)          += board-neuros-osd2.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index 04a6c4e67b14..5c5a95a9d7d2 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -11,3 +11,5 @@ else
 params_phys-y   := 0x80000100
 initrd_phys-y   := 0x80800000
 endif
+
+dtb-$(CONFIG_MACH_DA8XX_DT)     += da850-enbw-cmc.dtb da850-evm.dtb
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 32ee3f895967..d4f4dbfc0e59 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -11,39 +11,40 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/input.h>
+#include <linux/input/tps6507x-ts.h>
 #include <linux/mfd/tps6507x.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/uio_pruss.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/tps6507x.h>
-#include <linux/input/tps6507x-ts.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#include <linux/delay.h>
 #include <linux/wl12xx.h>
 
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system_info.h>
 
 #include <media/tvp514x.h>
 #include <media/adv7343.h>
@@ -1516,6 +1517,11 @@ static __init void da850_evm_init(void)
                 pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
                                 ret);
 
+        ret = da8xx_register_uio_pruss();
+        if (ret)
+                pr_warn("da850_evm_init: pruss initialization failed: %d\n",
+                                ret);
+
         /* Handle board specific muxing for LCD here */
         ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
         if (ret)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
new file mode 100644
index 000000000000..37c27af18fa0
--- /dev/null
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Modified from mach-omap/omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+#define DA8XX_NUM_UARTS 3
+
+void __init da8xx_uart_clk_enable(void)
+{
+        int i;
+        for (i = 0; i < DA8XX_NUM_UARTS; i++)
+                davinci_serial_setup_clk(i, NULL);
+}
+
+static struct of_device_id da8xx_irq_match[] __initdata = {
+        { .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
+        { }
+};
+
+static void __init da8xx_init_irq(void)
+{
+        of_irq_init(da8xx_irq_match);
+}
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static void __init da850_init_machine(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+        da8xx_uart_clk_enable();
+}
+
+static const char *da850_boards_compat[] __initdata = {
+        "enbw,cmc",
+        "ti,da850-evm",
+        "ti,da850",
+        NULL,
+};
+
+DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
+        .map_io         = da850_init,
+        .init_irq       = da8xx_init_irq,
+        .timer          = &davinci_timer,
+        .init_machine   = da850_init_machine,
+        .dt_compat      = da850_boards_compat,
+        .init_late      = davinci_init_late,
+        .restart        = da8xx_restart,
+MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 485ce6c477f9..c606080b5dfa 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -100,6 +100,7 @@ static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
         REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
         REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
         REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
+        REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */
 };
 static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
         REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
@@ -110,6 +111,7 @@ static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
 static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
         REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
         REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
+        REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */
 };
 static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
         REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index b74422679126..318bd8df7fcc 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -51,6 +51,10 @@
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
 
+#define VERSION_MASK            0x7
+#define MOTHERBOARD_SHIFT       4
+#define EXPBOARD_SHIFT          0
+
 #define MOTHERBOARD_BIT2        (GPIO_PORTD + 31)
 #define MOTHERBOARD_BIT1        (GPIO_PORTD + 30)
 #define MOTHERBOARD_BIT0        (GPIO_PORTD + 29)
@@ -237,7 +241,7 @@ static struct mx2_camera_platform_data visstrim_camera = {
 static phys_addr_t mx2_camera_base __initdata;
 #define MX2_CAMERA_BUF_SIZE SZ_8M
 
-static void __init visstrim_camera_init(void)
+static void __init visstrim_analog_camera_init(void)
 {
         struct platform_device *pdev;
         int dma;
@@ -474,6 +478,27 @@ static void __init visstrim_deinterlace_init(void)
                 return;
 }
 
+/* Emma-PrP for format conversion */
+static void __init visstrim_emmaprp_init(void)
+{
+        struct platform_device *pdev;
+        int dma;
+
+        pdev = imx27_add_mx2_emmaprp();
+        if (IS_ERR(pdev))
+                return;
+
+        /*
+         * Use the same memory area as the analog camera since both
+         * devices are, by nature, exclusive.
+         */
+        dma = dma_declare_coherent_memory(&pdev->dev,
+                                mx2_camera_base, mx2_camera_base,
+                                MX2_CAMERA_BUF_SIZE,
+                                DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+        if (!(dma & DMA_MEMORY_MAP))
+                pr_err("Failed to declare memory for emmaprp\n");
+}
 
 /* Audio */
 static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
@@ -507,13 +532,14 @@ static void __init visstrim_m10_revision(void)
         mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
 
         system_rev = 0x27000;
-        system_rev |= (mo_version << 4);
-        system_rev |= exp_version;
+        system_rev |= (mo_version << MOTHERBOARD_SHIFT);
+        system_rev |= (exp_version << EXPBOARD_SHIFT);
 }
 
 static void __init visstrim_m10_board_init(void)
 {
         int ret;
+        int mo_version;
 
         imx27_soc_init();
         visstrim_m10_revision();
@@ -546,8 +572,24 @@ static void __init visstrim_m10_board_init(void)
         platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
                                       &iclink_tvp5150, sizeof(iclink_tvp5150));
         gpio_led_register_device(0, &visstrim_m10_led_data);
-        visstrim_deinterlace_init();
-        visstrim_camera_init();
+
+        /* Use mother board version to decide what video devices we shall use */
+        mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK;
+        if (mo_version & 0x1) {
+                visstrim_emmaprp_init();
+
+                /*
+                 * Despite not being used, tvp5150 must be
+                 * powered on to avoid I2C problems. To minimize
+                 * power consupmtion keep reset enabled.
+                 */
+                gpio_set_value(TVP5150_PWDN, 1);
+                ndelay(1);
+                gpio_set_value(TVP5150_RSTN, 0);
+        } else {
+                visstrim_deinterlace_init();
+                visstrim_analog_camera_init();
+        }
         visstrim_coda_init();
 }
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 50bca5032b7e..d018ad4bcc3c 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -130,6 +130,63 @@ config MACH_KM_KIRKWOOD_DT
           Say 'Y' here if you want your kernel to support the
           Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
 
+config MACH_INETSPACE_V2_DT
+        bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the LaCie
+          Internet Space v2 NAS, using Flattened Device Tree.
+
+config MACH_MPLCEC4_DT
+        bool "MPL CEC4 (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the
+          MPL CEC4 (Flattened Device Tree).
+
+config MACH_NETSPACE_V2_DT
+        bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the LaCie
+          Network Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MAX_V2_DT
+        bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the LaCie
+          Network Space Max v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_LITE_V2_DT
+        bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the LaCie
+          Network Space Lite v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MINI_V2_DT
+        bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the LaCie
+          Network Space Mini v2 NAS (aka SafeBox), using Flattened
+          Device Tree.
+
+config MACH_OPENBLOCKS_A6_DT
+        bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the
+          Plat'Home OpenBlocks A6 (Flattened Device Tree).
+
+config MACH_TOPKICK_DT
+        bool "USI Topkick (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the
+          USI Topkick, using Flattened Device Tree
+
 config MACH_TS219
         bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
         help
@@ -216,6 +273,14 @@ config MACH_T5325
           Say 'Y' here if you want your kernel to support the
           HP t5325 Thin Client.
 
+config MACH_NSA310_DT
+        bool "ZyXEL NSA-310 (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        select ARM_ATAG_DTB_COMPAT
+        help
+          Say 'Y' here if you want your kernel to support the
+          ZyXEL NSA-310 board (Flattened Device Tree).
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 294779f892d9..8d2e5a96247c 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -31,3 +31,12 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)              += board-lsxl.o
 obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)    += board-iomega_ix2_200.o
 obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)       += board-km_kirkwood.o
+obj-$(CONFIG_MACH_INETSPACE_V2_DT)      += board-ns2.o
+obj-$(CONFIG_MACH_MPLCEC4_DT)           += board-mplcec4.o
+obj-$(CONFIG_MACH_NETSPACE_V2_DT)       += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)   += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)  += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)  += board-ns2.o
+obj-$(CONFIG_MACH_NSA310_DT)            += board-nsa310.o
+obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)     += board-openblocks_a6.o
+obj-$(CONFIG_MACH_TOPKICK_DT)           += board-usi_topkick.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e75fbdb533de..375f7d88551c 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -30,6 +30,8 @@ static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
         OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
         OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
                        NULL),
+        OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1",
+                       NULL),
         OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
         OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
         OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
@@ -94,6 +96,25 @@ static void __init kirkwood_dt_init(void)
         if (of_machine_is_compatible("keymile,km_kirkwood"))
                 km_kirkwood_init();
 
+        if (of_machine_is_compatible("lacie,inetspace_v2") ||
+            of_machine_is_compatible("lacie,netspace_v2") ||
+            of_machine_is_compatible("lacie,netspace_max_v2") ||
+            of_machine_is_compatible("lacie,netspace_lite_v2") ||
+            of_machine_is_compatible("lacie,netspace_mini_v2"))
+                ns2_init();
+
+        if (of_machine_is_compatible("mpl,cec4"))
+                mplcec4_init();
+
+        if (of_machine_is_compatible("plathome,openblocks-a6"))
+                openblocks_a6_init();
+
+        if (of_machine_is_compatible("usi,topkick"))
+                usi_topkick_init();
+
+        if (of_machine_is_compatible("zyxel,nsa310"))
+                nsa310_init();
+
         of_platform_populate(NULL, kirkwood_dt_match_table,
                              kirkwood_auxdata_lookup, NULL);
 }
@@ -110,6 +131,15 @@ static const char * const kirkwood_dt_board_compat[] = {
         "buffalo,lsxl",
         "iom,ix2-200",
         "keymile,km_kirkwood",
+        "lacie,inetspace_v2",
+        "lacie,netspace_max_v2",
+        "lacie,netspace_v2",
+        "lacie,netspace_lite_v2",
+        "lacie,netspace_mini_v2",
+        "mpl,cec4",
+        "plathome,openblocks-a6",
+        "usi,topkick",
+        "zyxel,nsa310",
         NULL
 };
 
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 64e5cc6b6d5f..7e18cad9b796 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/gpio-fan.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -45,51 +44,6 @@ static unsigned int lsxl_mpp_config[] __initdata = {
         0
 };
 
-#define LSXL_GPIO_FAN_HIGH      18
-#define LSXL_GPIO_FAN_LOW       19
-#define LSXL_GPIO_FAN_LOCK      40
-
-static struct gpio_fan_alarm lsxl_alarm = {
-        .gpio = LSXL_GPIO_FAN_LOCK,
-};
-
-static struct gpio_fan_speed lsxl_speeds[] = {
-        {
-                .rpm = 0,
-                .ctrl_val = 3,
-        }, {
-                .rpm = 1500,
-                .ctrl_val = 1,
-        }, {
-                .rpm = 3250,
-                .ctrl_val = 2,
-        }, {
-                .rpm = 5000,
-                .ctrl_val = 0,
-        }
-};
-
-static int lsxl_gpio_list[] = {
-        LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW,
-};
-
-static struct gpio_fan_platform_data lsxl_fan_data = {
-        .num_ctrl = ARRAY_SIZE(lsxl_gpio_list),
-        .ctrl = lsxl_gpio_list,
-        .alarm = &lsxl_alarm,
-        .num_speed = ARRAY_SIZE(lsxl_speeds),
-        .speed = lsxl_speeds,
-};
-
-static struct platform_device lsxl_fan_device = {
-        .name = "gpio-fan",
-        .id = -1,
-        .num_resources = 0,
-        .dev = {
-                .platform_data = &lsxl_fan_data,
-        },
-};
-
 /*
  * On the LS-XHL/LS-CHLv2, the shutdown process is following:
  * - Userland monitors key events until the power switch goes to off position
@@ -120,7 +74,6 @@ void __init lsxl_init(void)
         kirkwood_ehci_init();
         kirkwood_ge00_init(&lsxl_ge00_data);
         kirkwood_ge01_init(&lsxl_ge01_data);
-        platform_device_register(&lsxl_fan_device);
 
         /* register power-off method */
         pm_power_off = lsxl_power_off;
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
new file mode 100644
index 000000000000..e78a227468e6
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2012 MPL AG, Switzerland
+ * Stefan Peter <s.peter@mpl.ch>
+ *
+ * arch/arm/mach-kirkwood/board-mplcec4.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(2),
+};
+
+static unsigned int mplcec4_mpp_config[] __initdata = {
+        MPP0_NF_IO2,
+        MPP1_NF_IO3,
+        MPP2_NF_IO4,
+        MPP3_NF_IO5,
+        MPP4_NF_IO6,
+        MPP5_NF_IO7,
+        MPP6_SYSRST_OUTn,
+        MPP7_GPO,       /* Status LED Green High Active */
+        MPP10_UART0_TXD,
+        MPP11_UART0_RXD,
+        MPP12_SD_CLK,
+        MPP13_SD_CMD,   /* Alt UART1_TXD */
+        MPP14_SD_D0,    /* Alt UART1_RXD */
+        MPP15_SD_D1,
+        MPP16_SD_D2,
+        MPP17_SD_D3,
+        MPP18_NF_IO0,
+        MPP19_NF_IO1,
+        MPP28_GPIO,     /* Input SYS_POR_DET (active High) */
+        MPP29_GPIO,     /* Input SYS_RTC_INT (active High) */
+        MPP34_SATA1_ACTn,
+        MPP35_SATA0_ACTn,
+        MPP40_GPIO,     /* LED User1 orange */
+        MPP41_GPIO,     /* LED User1 green */
+        MPP44_GPIO,     /* LED User0 orange */
+        MPP45_GPIO,     /* LED User0 green */
+        MPP46_GPIO,     /* Status LED Yellow High Active */
+        MPP47_GPIO,     /* SD_CD# (in/IRQ)*/
+        0
+};
+
+
+static struct mvsdio_platform_data mplcec4_mvsdio_data = {
+        .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
+
+
+void __init mplcec4_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(mplcec4_mpp_config);
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&mplcec4_ge00_data);
+        kirkwood_ge01_init(&mplcec4_ge01_data);
+        kirkwood_sdio_init(&mplcec4_mvsdio_data);
+        kirkwood_pcie_init(KW_PCIE0);
+}
+
+
+
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
new file mode 100644
index 000000000000..78596c4f76d2
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int ns2_mpp_config[] __initdata = {
+        MPP0_SPI_SCn,
+        MPP1_SPI_MOSI,
+        MPP2_SPI_SCK,
+        MPP3_SPI_MISO,
+        MPP4_NF_IO6,
+        MPP5_NF_IO7,
+        MPP6_SYSRST_OUTn,
+        MPP7_GPO,               /* Fan speed (bit 1) */
+        MPP8_TW0_SDA,
+        MPP9_TW0_SCK,
+        MPP10_UART0_TXD,
+        MPP11_UART0_RXD,
+        MPP12_GPO,              /* Red led */
+        MPP14_GPIO,             /* USB fuse */
+        MPP16_GPIO,             /* SATA 0 power */
+        MPP17_GPIO,             /* SATA 1 power */
+        MPP18_NF_IO0,
+        MPP19_NF_IO1,
+        MPP20_SATA1_ACTn,
+        MPP21_SATA0_ACTn,
+        MPP22_GPIO,             /* Fan speed (bit 0) */
+        MPP23_GPIO,             /* Fan power */
+        MPP24_GPIO,             /* USB mode select */
+        MPP25_GPIO,             /* Fan rotation fail */
+        MPP26_GPIO,             /* USB device vbus */
+        MPP28_GPIO,             /* USB enable host vbus */
+        MPP29_GPIO,             /* Blue led (slow register) */
+        MPP30_GPIO,             /* Blue led (command register) */
+        MPP31_GPIO,             /* Board power off */
+        MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
+        MPP33_GPO,              /* Fan speed (bit 2) */
+        0
+};
+
+#define NS2_GPIO_POWER_OFF      31
+
+static void ns2_power_off(void)
+{
+        gpio_set_value(NS2_GPIO_POWER_OFF, 1);
+}
+
+void __init ns2_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(ns2_mpp_config);
+
+        kirkwood_ehci_init();
+        if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+            of_machine_is_compatible("lacie,netspace_mini_v2"))
+                ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+        kirkwood_ge00_init(&ns2_ge00_data);
+
+        if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
+            gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
+                pm_power_off = ns2_power_off;
+        else
+                pr_err("ns2: failed to configure power-off GPIO\n");
+}
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
new file mode 100644
index 000000000000..027ce83f3fe5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-kirkwood/nsa-310-setup.c
+ *
+ * ZyXEL NSA-310 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NSA310_GPIO_USB_POWER_OFF       21
+#define NSA310_GPIO_POWER_OFF           48
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+        MPP12_GPIO, /* led esata green */
+        MPP13_GPIO, /* led esata red */
+        MPP15_GPIO, /* led usb green */
+        MPP16_GPIO, /* led usb red */
+        MPP21_GPIO, /* control usb power off */
+        MPP28_GPIO, /* led sys green */
+        MPP29_GPIO, /* led sys red */
+        MPP36_GPIO, /* key reset */
+        MPP37_GPIO, /* key copy */
+        MPP39_GPIO, /* led copy green */
+        MPP40_GPIO, /* led copy red */
+        MPP41_GPIO, /* led hdd green */
+        MPP42_GPIO, /* led hdd red */
+        MPP44_GPIO, /* ?? */
+        MPP46_GPIO, /* key power */
+        MPP48_GPIO, /* control power off */
+        0
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
+        { I2C_BOARD_INFO("adt7476", 0x2e) },
+};
+
+static void nsa310_power_off(void)
+{
+        gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
+}
+
+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
+                                       const char *label)
+{
+        int err;
+
+        err = gpio_request_one(gpio, flags, label);
+        if (err)
+                pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
+                        gpio, label, err);
+
+        return err;
+}
+
+static void __init nsa310_gpio_init(void)
+{
+        int err;
+
+        err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
+                                  "Power Off");
+        if (!err)
+                pm_power_off = nsa310_power_off;
+
+        nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
+                            "USB Power Off");
+}
+
+void __init nsa310_init(void)
+{
+        u32 dev, rev;
+
+        kirkwood_mpp_conf(nsa310_mpp_config);
+
+        nsa310_gpio_init();
+
+        /* this can be removed once the mainline kirkwood.dtsi gets
+         * the ehci configuration by default */
+        kirkwood_ehci_init();
+
+        kirkwood_pcie_id(&dev, &rev);
+
+        i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
+}
+
+static int __init nsa310_pci_init(void)
+{
+        if (of_machine_is_compatible("zyxel,nsa310"))
+                kirkwood_pcie_init(KW_PCIE0);
+
+        return 0;
+}
+
+subsys_initcall(nsa310_pci_init);
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
new file mode 100644
index 000000000000..e807e8cfdd44
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * arch/arm/mach-kirkwood/board-openblocks_a6.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data openblocks_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static unsigned int openblocks_a6_mpp_config[] __initdata = {
+        MPP0_NF_IO2,
+        MPP1_NF_IO3,
+        MPP2_NF_IO4,
+        MPP3_NF_IO5,
+        MPP4_NF_IO6,
+        MPP5_NF_IO7,
+        MPP6_SYSRST_OUTn,
+        MPP8_UART1_RTS,
+        MPP9_UART1_CTS,
+        MPP10_UART0_TXD,
+        MPP11_UART0_RXD,
+        MPP13_UART1_TXD,
+        MPP14_UART1_RXD,
+        MPP15_UART0_RTS,
+        MPP16_UART0_CTS,
+        MPP18_NF_IO0,
+        MPP19_NF_IO1,
+        MPP20_GPIO, /* DIP SW0 */
+        MPP21_GPIO, /* DIP SW1 */
+        MPP22_GPIO, /* DIP SW2 */
+        MPP23_GPIO, /* DIP SW3 */
+        MPP24_GPIO, /* GPIO 0 */
+        MPP25_GPIO, /* GPIO 1 */
+        MPP26_GPIO, /* GPIO 2 */
+        MPP27_GPIO, /* GPIO 3 */
+        MPP28_GPIO, /* GPIO 4 */
+        MPP29_GPIO, /* GPIO 5 */
+        MPP30_GPIO, /* GPIO 6 */
+        MPP31_GPIO, /* GPIO 7 */
+        MPP36_TW1_SDA,
+        MPP37_TW1_SCK,
+        MPP38_GPIO, /* INIT */
+        MPP39_GPIO, /* USB OC */
+        MPP41_GPIO, /* LED: Red */
+        MPP42_GPIO, /* LED: Yellow */
+        MPP43_GPIO, /* LED: Green */
+        0,
+};
+
+void __init openblocks_a6_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(openblocks_a6_mpp_config);
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&openblocks_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
new file mode 100644
index 000000000000..e2ec9d891fe3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-usi_topkick.c
+ *
+ * USI Topkick Init for drivers not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data topkick_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data topkick_mvsdio_data = {
+        /* unfortunately the CD signal has not been connected */
+};
+
+/*
+ * GPIO LED layout
+ *
+ *       /-SYS_LED(2)
+ *       |
+ *       |   /-DISK_LED
+ *       |   |
+ *       |   |   /-WLAN_LED(2)
+ *       |   |   |
+ * [SW] [*] [*] [*]
+ */
+
+/*
+ * Switch positions
+ *
+ *     /-SW_LEFT
+ *     |
+ *     |   /-SW_IDLE
+ *     |   |
+ *     |   |   /-SW_RIGHT
+ *     |   |   |
+ * PS [L] [I] [R] LEDS
+ */
+
+static unsigned int topkick_mpp_config[] __initdata = {
+        MPP21_GPIO,     /* DISK_LED           (low active) - yellow */
+        MPP36_GPIO,     /* SATA0 power enable (high active) */
+        MPP37_GPIO,     /* SYS_LED2           (low active) - red */
+        MPP38_GPIO,     /* SYS_LED            (low active) - blue */
+        MPP39_GPIO,     /* WLAN_LED           (low active) - green */
+        MPP43_GPIO,     /* SW_LEFT            (low active) */
+        MPP44_GPIO,     /* SW_RIGHT           (low active) */
+        MPP45_GPIO,     /* SW_IDLE            (low active) */
+        MPP46_GPIO,     /* SW_LEFT            (low active) */
+        MPP48_GPIO,     /* WLAN_LED2          (low active) - yellow */
+        0
+};
+
+#define TOPKICK_SATA0_PWR_ENABLE 36
+
+void __init usi_topkick_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(topkick_mpp_config);
+
+        /* SATA0 power enable */
+        gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&topkick_ge00_data);
+        kirkwood_sdio_init(&topkick_mvsdio_data);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f0fc25bd3ffe..5303be62b311 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -266,6 +266,7 @@ void __init kirkwood_clk_init(void)
         orion_clkdev_add("1", "pcie", pex1);
         orion_clkdev_add(NULL, "kirkwood-i2s", audio);
         orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
+        orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
 
         /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
          * so should never be gated.
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6088e9227889..5ffa57f08c80 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -113,6 +113,40 @@ void km_kirkwood_init(void);
 static inline void km_kirkwood_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_MPLCEC4_DT
+void mplcec4_init(void);
+#else
+static inline void mplcec4_init(void) {};
+#endif
+
+#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
+        defined(CONFIG_MACH_NETSPACE_V2_DT) || \
+        defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
+        defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
+        defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
+void ns2_init(void);
+#else
+static inline void ns2_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_NSA310_DT
+void nsa310_init(void);
+#else
+static inline void nsa310_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
+void openblocks_a6_init(void);
+#else
+static inline void openblocks_a6_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_TOPKICK_DT
+void usi_topkick_init(void);
+#else
+static inline void usi_topkick_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 178d4daa5e1d..ebdda8346a26 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -89,6 +89,8 @@ config MACH_MMP_DT
         select CPU_PXA168
         select CPU_PXA910
         select USE_OF
+        select PINCTRL
+        select PINCTRL_SINGLE
         help
           Include support for Marvell MMP2 based platforms using
           the device tree. Needn't select any other machine while
@@ -99,6 +101,8 @@ config MACH_MMP2_DT
         depends on !CPU_MOHAWK
         select CPU_MMP2
         select USE_OF
+        select PINCTRL
+        select PINCTRL_SINGLE
         help
           Include support for Marvell MMP2 based platforms using
           the device tree.
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index e067f221f0f9..560a7dcf0a56 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -307,8 +307,7 @@ static void __init omap_fsample_init(void)
 
         fsample_init_smc91x();
 
-        if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-                BUG();
+        BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0);
         gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
 
         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 9134b646f01b..4953cf7a5123 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -412,8 +412,7 @@ static void __init h2_init(void)
 
         h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
         h2_nand_resource.end += SZ_4K - 1;
-        if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-                BUG();
+        BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
         gpio_direction_input(H2_NAND_RB_GPIO_PIN);
 
         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index bf213d1d8075..563ba167bb16 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -406,8 +406,7 @@ static void __init h3_init(void)
 
         nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
         nand_resource.end += SZ_4K - 1;
-        if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-                BUG();
+        BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
         gpio_direction_input(H3_NAND_RB_GPIO_PIN);
 
         /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 9a7e483ed6fd..27f8d12ec222 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -275,8 +275,7 @@ static void __init omap_perseus2_init(void)
 
         perseus2_init_smc91x();
 
-        if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-                BUG();
+        BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
         gpio_direction_input(P2_NAND_RB_GPIO_PIN);
 
         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d669e227e00c..2265e5826883 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -270,14 +270,14 @@ config MACH_NOKIA_N8X0
         select OMAP_PACKAGE_ZAC
 
 config MACH_NOKIA_RM680
-        bool "Nokia RM-680/696 board"
+        bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
         depends on ARCH_OMAP3
         default y
         select MACH_NOKIA_RM696
         select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_RX51
-        bool "Nokia RX-51 board"
+        bool "Nokia N900 (RX-51) phone"
         depends on ARCH_OMAP3
         default y
         select OMAP_PACKAGE_CBB
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 11c57af01a88..b455ffc12ebe 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -295,4 +295,4 @@ endif
 emac-$(CONFIG_TI_DAVINCI_EMAC)          := am35xx-emac.o
 obj-y                                   += $(emac-m) $(emac-y)
 
-obj-y                                   += common-board-devices.o twl-common.o
+obj-y                                   += common-board-devices.o twl-common.o dss-common.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 85dfa71e0dc6..1cc6696594fd 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -36,9 +36,6 @@
 
 #include "common.h"
 #include "omap4-keypad.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-nokia-dsi.h>
-#include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -48,17 +45,13 @@
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "dss-common.h"
 
 #define ETH_KS8851_IRQ                  34
 #define ETH_KS8851_POWER_ON             48
 #define ETH_KS8851_QUART                138
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO        184
 #define OMAP4_SFH7741_ENABLE_GPIO               188
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
-#define DISPLAY_SEL_GPIO        59      /* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO       40
 
 #define GPIO_WIFI_PMENA         54
 #define GPIO_WIFI_IRQ           53
@@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void)
                         __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 }
 
-static struct nokia_dsi_panel_data dsi1_panel = {
-                .name           = "taal",
-                .reset_gpio     = 102,
-                .use_ext_te     = false,
-                .ext_te_gpio    = 101,
-                .esd_interval   = 0,
-                .pin_config = {
-                        .num_pins       = 6,
-                        .pins           = { 0, 1, 2, 3, 4, 5 },
-                },
-};
-
-static struct omap_dss_device sdp4430_lcd_device = {
-        .name                   = "lcd",
-        .driver_name            = "taal",
-        .type                   = OMAP_DISPLAY_TYPE_DSI,
-        .data                   = &dsi1_panel,
-        .phy.dsi                = {
-                .module         = 0,
-        },
-        .channel                = OMAP_DSS_CHANNEL_LCD,
-};
-
-static struct nokia_dsi_panel_data dsi2_panel = {
-                .name           = "taal",
-                .reset_gpio     = 104,
-                .use_ext_te     = false,
-                .ext_te_gpio    = 103,
-                .esd_interval   = 0,
-                .pin_config = {
-                        .num_pins       = 6,
-                        .pins           = { 0, 1, 2, 3, 4, 5 },
-                },
-};
-
-static struct omap_dss_device sdp4430_lcd2_device = {
-        .name                   = "lcd2",
-        .driver_name            = "taal",
-        .type                   = OMAP_DISPLAY_TYPE_DSI,
-        .data                   = &dsi2_panel,
-        .phy.dsi                = {
-
-                .module         = 1,
-        },
-        .channel                = OMAP_DSS_CHANNEL_LCD2,
-};
-
-static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
-        .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-        .ls_oe_gpio = HDMI_GPIO_LS_OE,
-        .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct omap_dss_device sdp4430_hdmi_device = {
-        .name = "hdmi",
-        .driver_name = "hdmi_panel",
-        .type = OMAP_DISPLAY_TYPE_HDMI,
-        .channel = OMAP_DSS_CHANNEL_DIGIT,
-        .data = &sdp4430_hdmi_data,
-};
-
-static struct picodlp_panel_data sdp4430_picodlp_pdata = {
-        .picodlp_adapter_id     = 2,
-        .emu_done_gpio          = 44,
-        .pwrgood_gpio           = 45,
-};
-
-static void sdp4430_picodlp_init(void)
-{
-        int r;
-        const struct gpio picodlp_gpios[] = {
-                {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-                        "DLP POWER ON"},
-                {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
-                        "DLP EMU DONE"},
-                {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
-                        "DLP PWRGOOD"},
-        };
-
-        r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
-        if (r)
-                pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
-}
-
-static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
-{
-        gpio_set_value(DISPLAY_SEL_GPIO, 0);
-        gpio_set_value(DLP_POWER_ON_GPIO, 1);
-
-        return 0;
-}
-
-static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
-{
-        gpio_set_value(DLP_POWER_ON_GPIO, 0);
-        gpio_set_value(DISPLAY_SEL_GPIO, 1);
-}
-
-static struct omap_dss_device sdp4430_picodlp_device = {
-        .name                   = "picodlp",
-        .driver_name            = "picodlp_panel",
-        .type                   = OMAP_DISPLAY_TYPE_DPI,
-        .phy.dpi.data_lines     = 24,
-        .channel                = OMAP_DSS_CHANNEL_LCD2,
-        .platform_enable        = sdp4430_panel_enable_picodlp,
-        .platform_disable       = sdp4430_panel_disable_picodlp,
-        .data                   = &sdp4430_picodlp_pdata,
-};
-
-static struct omap_dss_device *sdp4430_dss_devices[] = {
-        &sdp4430_lcd_device,
-        &sdp4430_lcd2_device,
-        &sdp4430_hdmi_device,
-        &sdp4430_picodlp_device,
-};
-
-static struct omap_dss_board_info sdp4430_dss_data = {
-        .num_devices    = ARRAY_SIZE(sdp4430_dss_devices),
-        .devices        = sdp4430_dss_devices,
-        .default_device = &sdp4430_lcd_device,
-};
-
-static void __init omap_4430sdp_display_init(void)
-{
-        int r;
-
-        /* Enable LCD2 by default (instead of Pico DLP) */
-        r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-                        "display_sel");
-        if (r)
-                pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-        sdp4430_picodlp_init();
-        omap_display_init(&sdp4430_dss_data);
-        /*
-         * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-         * later have external pull up on the HDMI I2C lines
-         */
-        if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-                omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-        else
-                omap_hdmi_init(0);
-
-        omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-        omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-        omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
         OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index f0715a369c44..53cb380b7877 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -21,6 +21,7 @@
 
 #include "common.h"
 #include "common-board-devices.h"
+#include "dss-common.h"
 
 #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
 #define intc_of_init    NULL
@@ -40,6 +41,15 @@ static void __init omap_generic_init(void)
         omap_sdrc_init(NULL, NULL);
 
         of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+
+        /*
+         * HACK: call display setup code for selected boards to enable omapdss.
+         * This will be removed when omapdss supports DT.
+         */
+        if (of_machine_is_compatible("ti,omap4-panda"))
+                omap4_panda_display_init_of();
+        else if (of_machine_is_compatible("ti,omap4-sdp"))
+                omap_4430sdp_display_init_of();
 }
 
 #ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 12a3a24d5bb5..5c8e9cee2c2e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -37,9 +37,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <video/omapdss.h>
-
-#include <video/omap-panel-tfp410.h>
 
 #include "common.h"
 #include "soc.h"
@@ -48,14 +45,12 @@
 #include "control.h"
 #include "mux.h"
 #include "common-board-devices.h"
+#include "dss-common.h"
 
 #define GPIO_HUB_POWER          1
 #define GPIO_HUB_NRESET         62
 #define GPIO_WIFI_PMENA         43
 #define GPIO_WIFI_IRQ           53
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
 static struct ti_st_plat_data wilink_platform_data = {
@@ -409,68 +404,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux       NULL
 #endif
 
-/* Display DVI */
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO        0
-
-/* Using generic display panel */
-static struct tfp410_platform_data omap4_dvi_panel = {
-        .i2c_bus_num            = 3,
-        .power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct omap_dss_device omap4_panda_dvi_device = {
-        .type                   = OMAP_DISPLAY_TYPE_DPI,
-        .name                   = "dvi",
-        .driver_name            = "tfp410",
-        .data                   = &omap4_dvi_panel,
-        .phy.dpi.data_lines     = 24,
-        .reset_gpio             = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-        .channel                = OMAP_DSS_CHANNEL_LCD2,
-};
-
-static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
-        .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-        .ls_oe_gpio = HDMI_GPIO_LS_OE,
-        .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct omap_dss_device  omap4_panda_hdmi_device = {
-        .name = "hdmi",
-        .driver_name = "hdmi_panel",
-        .type = OMAP_DISPLAY_TYPE_HDMI,
-        .channel = OMAP_DSS_CHANNEL_DIGIT,
-        .data = &omap4_panda_hdmi_data,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
-        &omap4_panda_dvi_device,
-        &omap4_panda_hdmi_device,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
-        .num_devices    = ARRAY_SIZE(omap4_panda_dss_devices),
-        .devices        = omap4_panda_dss_devices,
-        .default_device = &omap4_panda_dvi_device,
-};
-
-static void __init omap4_panda_display_init(void)
-{
-
-        omap_display_init(&omap4_panda_dss_data);
-
-        /*
-         * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-         * later have external pull up on the HDMI I2C lines
-         */
-        if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-                omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-        else
-                omap_hdmi_init(0);
-
-        omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-        omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-        omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
 
 static void omap4_panda_init_rev(void)
 {
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index cbcb1b2dc31f..0c777b75e484 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -1,5 +1,5 @@
 /*
- * Board support file for Nokia RM-680/696.
+ * Board support file for Nokia N950 (RM-680) / N9 (RM-696).
  *
  * Copyright (C) 2010 Nokia
  *
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index bf8f74b0ce3e..b67fe11d0d94 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/board-rx51.c
+ * Board support file for Nokia N900 (aka RX-51).
  *
  * Copyright (C) 2007, 2008 Nokia
  *
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
new file mode 100644
index 000000000000..679a0478644f
--- /dev/null
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2012 Texas Instruments, Inc..
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+/*
+ * NOTE: this is a transitional file to help with DT adaptation.
+ * This file will be removed when DSS supports DT.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
+
+#include <plat/cpu.h>
+
+#include "dss-common.h"
+#include "mux.h"
+
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD  63 /* Hotplug detect */
+
+/* Display DVI */
+#define PANDA_DVI_TFP410_POWER_DOWN_GPIO        0
+
+/* Using generic display panel */
+static struct tfp410_platform_data omap4_dvi_panel = {
+        .i2c_bus_num            = 3,
+        .power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct omap_dss_device omap4_panda_dvi_device = {
+        .type                   = OMAP_DISPLAY_TYPE_DPI,
+        .name                   = "dvi",
+        .driver_name            = "tfp410",
+        .data                   = &omap4_dvi_panel,
+        .phy.dpi.data_lines     = 24,
+        .reset_gpio             = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+        .channel                = OMAP_DSS_CHANNEL_LCD2,
+};
+
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+        .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+        .ls_oe_gpio = HDMI_GPIO_LS_OE,
+        .hpd_gpio = HDMI_GPIO_HPD,
+};
+
+static struct omap_dss_device  omap4_panda_hdmi_device = {
+        .name = "hdmi",
+        .driver_name = "hdmi_panel",
+        .type = OMAP_DISPLAY_TYPE_HDMI,
+        .channel = OMAP_DSS_CHANNEL_DIGIT,
+        .data = &omap4_panda_hdmi_data,
+};
+
+static struct omap_dss_device *omap4_panda_dss_devices[] = {
+        &omap4_panda_dvi_device,
+        &omap4_panda_hdmi_device,
+};
+
+static struct omap_dss_board_info omap4_panda_dss_data = {
+        .num_devices    = ARRAY_SIZE(omap4_panda_dss_devices),
+        .devices        = omap4_panda_dss_devices,
+        .default_device = &omap4_panda_dvi_device,
+};
+
+void __init omap4_panda_display_init(void)
+{
+        omap_display_init(&omap4_panda_dss_data);
+
+        /*
+         * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+         * later have external pull up on the HDMI I2C lines
+         */
+        if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+                omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+        else
+                omap_hdmi_init(0);
+
+        omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
+}
+
+void __init omap4_panda_display_init_of(void)
+{
+        omap_display_init(&omap4_panda_dss_data);
+}
+
+
+/* OMAP4 Blaze display data */
+
+#define DISPLAY_SEL_GPIO        59      /* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO       40
+
+static struct nokia_dsi_panel_data dsi1_panel = {
+                .name           = "taal",
+                .reset_gpio     = 102,
+                .use_ext_te     = false,
+                .ext_te_gpio    = 101,
+                .esd_interval   = 0,
+                .pin_config = {
+                        .num_pins       = 6,
+                        .pins           = { 0, 1, 2, 3, 4, 5 },
+                },
+};
+
+static struct omap_dss_device sdp4430_lcd_device = {
+        .name                   = "lcd",
+        .driver_name            = "taal",
+        .type                   = OMAP_DISPLAY_TYPE_DSI,
+        .data                   = &dsi1_panel,
+        .phy.dsi                = {
+                .module         = 0,
+        },
+        .channel                = OMAP_DSS_CHANNEL_LCD,
+};
+
+static struct nokia_dsi_panel_data dsi2_panel = {
+                .name           = "taal",
+                .reset_gpio     = 104,
+                .use_ext_te     = false,
+                .ext_te_gpio    = 103,
+                .esd_interval   = 0,
+                .pin_config = {
+                        .num_pins       = 6,
+                        .pins           = { 0, 1, 2, 3, 4, 5 },
+                },
+};
+
+static struct omap_dss_device sdp4430_lcd2_device = {
+        .name                   = "lcd2",
+        .driver_name            = "taal",
+        .type                   = OMAP_DISPLAY_TYPE_DSI,
+        .data                   = &dsi2_panel,
+        .phy.dsi                = {
+
+                .module         = 1,
+        },
+        .channel                = OMAP_DSS_CHANNEL_LCD2,
+};
+
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+        .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+        .ls_oe_gpio = HDMI_GPIO_LS_OE,
+        .hpd_gpio = HDMI_GPIO_HPD,
+};
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+        .name = "hdmi",
+        .driver_name = "hdmi_panel",
+        .type = OMAP_DISPLAY_TYPE_HDMI,
+        .channel = OMAP_DSS_CHANNEL_DIGIT,
+        .data = &sdp4430_hdmi_data,
+};
+
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+        .picodlp_adapter_id     = 2,
+        .emu_done_gpio          = 44,
+        .pwrgood_gpio           = 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+        int r;
+        const struct gpio picodlp_gpios[] = {
+                {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+                        "DLP POWER ON"},
+                {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+                        "DLP EMU DONE"},
+                {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+                        "DLP PWRGOOD"},
+        };
+
+        r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+        if (r)
+                pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+        gpio_set_value(DISPLAY_SEL_GPIO, 0);
+        gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+        return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+        gpio_set_value(DLP_POWER_ON_GPIO, 0);
+        gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+        .name                   = "picodlp",
+        .driver_name            = "picodlp_panel",
+        .type                   = OMAP_DISPLAY_TYPE_DPI,
+        .phy.dpi.data_lines     = 24,
+        .channel                = OMAP_DSS_CHANNEL_LCD2,
+        .platform_enable        = sdp4430_panel_enable_picodlp,
+        .platform_disable       = sdp4430_panel_disable_picodlp,
+        .data                   = &sdp4430_picodlp_pdata,
+};
+
+static struct omap_dss_device *sdp4430_dss_devices[] = {
+        &sdp4430_lcd_device,
+        &sdp4430_lcd2_device,
+        &sdp4430_hdmi_device,
+        &sdp4430_picodlp_device,
+};
+
+static struct omap_dss_board_info sdp4430_dss_data = {
+        .num_devices    = ARRAY_SIZE(sdp4430_dss_devices),
+        .devices        = sdp4430_dss_devices,
+        .default_device = &sdp4430_lcd_device,
+};
+
+void __init omap_4430sdp_display_init(void)
+{
+        int r;
+
+        /* Enable LCD2 by default (instead of Pico DLP) */
+        r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+                        "display_sel");
+        if (r)
+                pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+        sdp4430_picodlp_init();
+        omap_display_init(&sdp4430_dss_data);
+        /*
+         * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+         * later have external pull up on the HDMI I2C lines
+         */
+        if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+                omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+        else
+                omap_hdmi_init(0);
+
+        omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
+}
+
+void __init omap_4430sdp_display_init_of(void)
+{
+        int r;
+
+        /* Enable LCD2 by default (instead of Pico DLP) */
+        r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+                        "display_sel");
+        if (r)
+                pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+        sdp4430_picodlp_init();
+        omap_display_init(&sdp4430_dss_data);
+}
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
new file mode 100644
index 000000000000..915f6fff5106
--- /dev/null
+++ b/arch/arm/mach-omap2/dss-common.h
@@ -0,0 +1,14 @@
+#ifndef __OMAP_DSS_COMMON__
+#define __OMAP_DSS_COMMON__
+
+/*
+ * NOTE: this is a transitional file to help with DT adaptation.
+ * This file will be removed when DSS supports DT.
+ */
+
+void __init omap4_panda_display_init(void);
+void __init omap4_panda_display_init_of(void);
+void __init omap_4430sdp_display_init(void);
+void __init omap_4430sdp_display_init_of(void);
+
+#endif
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 0673f0c10432..2cb2f06c20f5 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -2,6 +2,13 @@ if ARCH_ORION5X
 
 menu "Orion Implementations"
 
+config ARCH_ORION5X_DT
+        bool "Marvell Orion5x Flattened Device Tree"
+        select USE_OF
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell Orion5x using flattened device tree.
+
 config MACH_DB88F5281
         bool "Marvell Orion-2 Development Board"
         select I2C_BOARDINFO
@@ -96,12 +103,13 @@ config MACH_MV2120
           Say 'Y' here if you want your kernel to support the
           HP Media Vault mv2120 or mv5100.
 
-config MACH_EDMINI_V2
-        bool "LaCie Ethernet Disk mini V2"
+config MACH_EDMINI_V2_DT
+        bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)"
         select I2C_BOARDINFO
+        select ARCH_ORION5X_DT
         help
           Say 'Y' here if you want your kernel to support the
-          LaCie Ethernet Disk mini V2.
+          LaCie Ethernet Disk mini V2 (Flattened Device Tree).
 
 config MACH_D2NET
         bool "LaCie d2 Network"
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 7f18cdacd487..9e809a7c05c0 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_WRT350N_V2)   += wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)       += ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)       += mv2120-setup.o
-obj-$(CONFIG_MACH_EDMINI_V2)    += edmini_v2-setup.o
 obj-$(CONFIG_MACH_D2NET)        += d2net-setup.o
 obj-$(CONFIG_MACH_BIGDISK)      += d2net-setup.o
 obj-$(CONFIG_MACH_NET2BIG)      += net2big-setup.o
@@ -22,3 +21,6 @@ obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_FXO)       += rd88f5181l-fxo-setup.o
 obj-$(CONFIG_MACH_RD88F6183AP_GE)       += rd88f6183ap-ge-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_LSCHL)    += ls-chl-setup.o
+
+obj-$(CONFIG_ARCH_ORION5X_DT)           += board-dt.o
+obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
new file mode 100644
index 000000000000..32e5c211a89b
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * arch/arm/mach-orion5x/board-dt.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include <plat/irq.h>
+#include "common.h"
+
+struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
+        OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+        OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+                       NULL),
+        OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+        OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
+        OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL),
+        {},
+};
+
+static void __init orion5x_dt_init(void)
+{
+        char *dev_name;
+        u32 dev, rev;
+
+        orion5x_id(&dev, &rev, &dev_name);
+        printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+
+        /*
+         * Setup Orion address map
+         */
+        orion5x_setup_cpu_mbus_bridge();
+
+        /* Setup root of clk tree */
+        clk_init();
+
+        /*
+         * Don't issue "Wait for Interrupt" instruction if we are
+         * running on D0 5281 silicon.
+         */
+        if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+                printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+                disable_hlt();
+        }
+
+        if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2"))
+                edmini_v2_init();
+
+        of_platform_populate(NULL, of_default_bus_match_table,
+                             orion5x_auxdata_lookup, NULL);
+}
+
+static const char *orion5x_dt_compat[] = {
+        "marvell,orion5x",
+        NULL,
+};
+
+DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
+        /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */
+        .map_io         = orion5x_map_io,
+        .init_early     = orion5x_init_early,
+        .init_irq       = orion_dt_init_irq,
+        .timer          = &orion5x_timer,
+        .init_machine   = orion5x_dt_init,
+        .restart        = orion5x_restart,
+        .dt_compat      = orion5x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b3eb3da01160..550f92320afb 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -65,7 +65,7 @@ void __init orion5x_map_io(void)
  ****************************************************************************/
 static struct clk *tclk;
 
-static void __init clk_init(void)
+void __init clk_init(void)
 {
         tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
                                        orion5x_tclk);
@@ -236,7 +236,7 @@ struct sys_timer orion5x_timer = {
 /*
  * Identify device ID and rev from PCIe configuration header space '0'.
  */
-static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
+void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 {
         orion5x_pcie_id(dev, rev);
 
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 31bab92ce038..7db5cdd9c4b7 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -12,6 +12,8 @@ void orion5x_map_io(void);
 void orion5x_init_early(void);
 void orion5x_init_irq(void);
 void orion5x_init(void);
+void orion5x_id(u32 *dev, u32 *rev, char **dev_name);
+void clk_init(void);
 extern int orion5x_tclk;
 extern struct sys_timer orion5x_timer;
 
@@ -54,6 +56,13 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
 int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_EDMINI_V2_DT
+void edmini_v2_init(void);
+#else
+static inline void edmini_v2_init(void) {};
+#endif
+
 struct meminfo;
 struct tag;
 extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 355e962137c7..d675e727803d 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
 };
 
 /*****************************************************************************
- * Sata
- ****************************************************************************/
-
-static struct mv_sata_platform_data edmini_v2_sata_data = {
-        .n_ports        = 2,
-};
-
-/*****************************************************************************
- * GPIO LED (simple - doesn't use hardware blinking support)
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_LED_POWER        16
-
-static struct gpio_led edmini_v2_leds[] = {
-        {
-                .name = "power:blue",
-                .gpio = EDMINI_V2_GPIO_LED_POWER,
-                .active_low = 1,
-        },
-};
-
-static struct gpio_led_platform_data edmini_v2_led_data = {
-        .num_leds = ARRAY_SIZE(edmini_v2_leds),
-        .leds = edmini_v2_leds,
-};
-
-static struct platform_device edmini_v2_gpio_leds = {
-        .name           = "leds-gpio",
-        .id             = -1,
-        .dev            = {
-                .platform_data  = &edmini_v2_led_data,
-        },
-};
-
-/****************************************************************************
- * GPIO key
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_KEY_POWER        18
-
-static struct gpio_keys_button edmini_v2_buttons[] = {
-        {
-                .code           = KEY_POWER,
-                .gpio           = EDMINI_V2_GPIO_KEY_POWER,
-                .desc           = "Power Button",
-                .active_low     = 0,
-        },
-};
-
-static struct gpio_keys_platform_data edmini_v2_button_data = {
-        .buttons        = edmini_v2_buttons,
-        .nbuttons       = ARRAY_SIZE(edmini_v2_buttons),
-};
-
-static struct platform_device edmini_v2_gpio_buttons = {
-        .name           = "gpio-keys",
-        .id             = -1,
-        .dev            = {
-                .platform_data  = &edmini_v2_button_data,
-        },
-};
-
-/*****************************************************************************
  * General Setup
  ****************************************************************************/
 static unsigned int edminiv2_mpp_modes[] __initdata = {
@@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = {
         0,
 };
 
-static void __init edmini_v2_init(void)
+void __init edmini_v2_init(void)
 {
-        /*
-         * Setup basic Orion functions. Need to be called early.
-         */
-        orion5x_init();
-
         orion5x_mpp_conf(edminiv2_mpp_modes);
 
         /*
@@ -221,15 +153,10 @@ static void __init edmini_v2_init(void)
          */
         orion5x_ehci0_init();
         orion5x_eth_init(&edmini_v2_eth_data);
-        orion5x_i2c_init();
-        orion5x_sata_init(&edmini_v2_sata_data);
-        orion5x_uart0_init();
 
         orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
                                 EDMINI_V2_NOR_BOOT_SIZE);
         platform_device_register(&edmini_v2_nor_flash);
-        platform_device_register(&edmini_v2_gpio_leds);
-        platform_device_register(&edmini_v2_gpio_buttons);
 
         pr_notice("edmini_v2: USB device port, flash write and power-off "
                   "are not yet supported.\n");
@@ -247,16 +174,3 @@ static void __init edmini_v2_init(void)
 
         i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
 }
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
-        /* Maintainer: Christopher Moore <moore@free.fr> */
-        .atag_offset    = 0x100,
-        .init_machine   = edmini_v2_init,
-        .map_io         = orion5x_map_io,
-        .init_early     = orion5x_init_early,
-        .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
-        .fixup          = tag_fixup_mem32,
-        .restart        = orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 63e7ae3ee9e6..131c86284711 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -294,6 +294,7 @@ config MACH_WLF_CRAGG_6410
         select S3C64XX_SETUP_SDHCI
         select S3C64XX_SETUP_SPI
         select S3C64XX_SETUP_USB_PHY
+        select S3C_DEV_FB
         select S3C_DEV_HSMMC
         select S3C_DEV_HSMMC1
         select S3C_DEV_HSMMC2
@@ -304,6 +305,7 @@ config MACH_WLF_CRAGG_6410
         select S3C_DEV_WDT
         select SAMSUNG_DEV_ADC
         select SAMSUNG_DEV_KEYPAD
+        select SAMSUNG_DEV_PWM
         select SAMSUNG_GPIO_EXTRA128
         help
           Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 4e3fe57674c8..c6d8dba90623 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -20,6 +20,8 @@
 
 #include <linux/regulator/machine.h>
 
+#include <sound/wm0010.h>
+#include <sound/wm2200.h>
 #include <sound/wm5100.h>
 #include <sound/wm8996.h>
 #include <sound/wm8962.h>
@@ -33,14 +35,34 @@ static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
         .line = S3C64XX_GPC(3),
 };
 
+static struct wm0010_pdata wm0010_pdata = {
+        .gpio_reset = S3C64XX_GPN(6),
+        .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+};
+
 static struct spi_board_info wm1253_devs[] = {
         [0] = {
                 .modalias       = "wm0010",
+                .max_speed_hz   = 26 * 1000 * 1000,
                 .bus_num        = 0,
                 .chip_select    = 0,
                 .mode           = SPI_MODE_0,
                 .irq            = S3C_EINT(5),
                 .controller_data = &wm0010_spi_csinfo,
+                .platform_data = &wm0010_pdata,
+        },
+};
+
+static struct spi_board_info balblair_devs[] = {
+        [0] = {
+                .modalias       = "wm0010",
+                .max_speed_hz   = 26 * 1000 * 1000,
+                .bus_num        = 0,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+                .irq            = S3C_EINT(4),
+                .controller_data = &wm0010_spi_csinfo,
+                .platform_data = &wm0010_pdata,
         },
 };
 
@@ -166,12 +188,13 @@ static struct regulator_init_data wm8994_ldo2 = {
 
 static struct wm8994_pdata wm8994_pdata = {
         .gpio_base = CODEC_GPIO_BASE,
+        .micb2_delay = 150,
         .gpio_defaults = {
                 0x3,          /* IRQ out, active high, CMOS */
         },
         .ldo = {
-                 { .init_data = &wm8994_ldo1, },
-                 { .init_data = &wm8994_ldo2, },
+                 { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
+                 { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
         },
 };
 
@@ -182,7 +205,7 @@ static const struct i2c_board_info wm1277_devs[] = {
         },
 };
 
-static struct arizona_pdata wm5102_pdata = {
+static struct arizona_pdata wm5102_reva_pdata = {
         .ldoena = S3C64XX_GPN(7),
         .gpio_base = CODEC_GPIO_BASE,
         .irq_active_high = true,
@@ -193,64 +216,131 @@ static struct arizona_pdata wm5102_pdata = {
         },
 };
 
-static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
+static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
         .line = S3C64XX_GPN(5),
 };
 
+static struct spi_board_info wm5102_reva_spi_devs[] = {
+        [0] = {
+                .modalias       = "wm5102",
+                .max_speed_hz   = 10 * 1000 * 1000,
+                .bus_num        = 0,
+                .chip_select    = 1,
+                .mode           = SPI_MODE_0,
+                .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
+                                  WM831X_IRQ_GPIO_2,
+                .controller_data = &codec_spi_csinfo,
+                .platform_data = &wm5102_reva_pdata,
+        },
+};
+
+static struct arizona_pdata wm5102_pdata = {
+        .ldoena = S3C64XX_GPN(7),
+        .gpio_base = CODEC_GPIO_BASE,
+        .irq_active_high = true,
+        .micd_pol_gpio = CODEC_GPIO_BASE + 2,
+        .gpio_defaults = {
+                [2] = 0x10000, /* AIF3TXLRCLK */
+                [3] = 0x4,     /* OPCLK */
+        },
+};
+
 static struct spi_board_info wm5102_spi_devs[] = {
         [0] = {
                 .modalias       = "wm5102",
                 .max_speed_hz   = 10 * 1000 * 1000,
                 .bus_num        = 0,
-                .chip_select    = 0,
+                .chip_select    = 1,
                 .mode           = SPI_MODE_0,
                 .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
                                   WM831X_IRQ_GPIO_2,
-                .controller_data = &wm5102_spi_csinfo,
+                .controller_data = &codec_spi_csinfo,
                 .platform_data = &wm5102_pdata,
         },
 };
 
+static struct spi_board_info wm5110_spi_devs[] = {
+        [0] = {
+                .modalias       = "wm5110",
+                .max_speed_hz   = 10 * 1000 * 1000,
+                .bus_num        = 0,
+                .chip_select    = 1,
+                .mode           = SPI_MODE_0,
+                .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
+                                  WM831X_IRQ_GPIO_2,
+                .controller_data = &codec_spi_csinfo,
+                .platform_data = &wm5102_reva_pdata,
+        },
+};
+
 static const struct i2c_board_info wm6230_i2c_devs[] = {
         { I2C_BOARD_INFO("wm9081", 0x6c),
           .platform_data = &wm9081_pdata, },
 };
 
+static struct wm2200_pdata wm2200_pdata = {
+        .ldo_ena = S3C64XX_GPN(7),
+        .gpio_defaults = {
+                [2] = 0x0005,  /* GPIO3 24.576MHz output clock */
+        },
+};
+
+static const struct i2c_board_info wm2200_i2c[] = {
+        { I2C_BOARD_INFO("wm2200", 0x3a),
+          .platform_data = &wm2200_pdata, },
+};
+
 static __devinitdata const struct {
         u8 id;
+        u8 rev;
         const char *name;
         const struct i2c_board_info *i2c_devs;
         int num_i2c_devs;
         const struct spi_board_info *spi_devs;
         int num_spi_devs;
 } gf_mods[] = {
-        { .id = 0x01, .name = "1250-EV1 Springbank" },
-        { .id = 0x02, .name = "1251-EV1 Jura" },
-        { .id = 0x03, .name = "1252-EV1 Glenlivet" },
-        { .id = 0x11, .name = "6249-EV2 Glenfarclas", },
-        { .id = 0x14, .name = "6271-EV1 Lochnagar" },
-        { .id = 0x15, .name = "6320-EV1 Bells",
+        { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
+        { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
+        { .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
+        { .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
+        { .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
+          .spi_devs = wm5110_spi_devs,
+          .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
+        { .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
+        { .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
+        { .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
+        { .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
+        { .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
+        { .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
+        { .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
           .i2c_devs = wm6230_i2c_devs,
           .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
-        { .id = 0x21, .name = "1275-EV1 Mortlach" },
-        { .id = 0x25, .name = "1274-EV1 Glencadam" },
-        { .id = 0x31, .name = "1253-EV1 Tomatin",
+        { .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
+        { .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
+        { .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
           .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
-        { .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
-        { .id = 0x33, .name = "XXXX-EV1 Oban" },
-        { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
-        { .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+        { .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
+        { .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
+        { .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
+          .spi_devs = balblair_devs,
+          .num_spi_devs = ARRAY_SIZE(balblair_devs) },
+        { .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
           .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
-        { .id = 0x3a, .name = "1259-EV1 Tobermory",
+        { .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
           .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
-        { .id = 0x3b, .name = "1255-EV1 Kilchoman",
+        { .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
           .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
-        { .id = 0x3c, .name = "1273-EV1 Longmorn" },
-        { .id = 0x3d, .name = "1277-EV1 Littlemill",
+        { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
+        { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
           .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
-        { .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut",
+        { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
+          .spi_devs = wm5102_reva_spi_devs,
+          .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) },
+        { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
           .spi_devs = wm5102_spi_devs,
           .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
+        { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
+          .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
 };
 
 static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
@@ -267,7 +357,8 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
         id = (ret & 0xfe) >> 2;
         rev = ret & 0x3;
         for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
-                if (id == gf_mods[i].id)
+                if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
+                                            rev == gf_mods[i].rev))
                         break;
 
         if (i < ARRAY_SIZE(gf_mods)) {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 13b7eaa45fd0..701f421de1a8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -287,16 +287,21 @@ static struct platform_device littlemill_device = {
         .id             = -1,
 };
 
-static struct platform_device bells_wm5102_device = {
+static struct platform_device bells_wm2200_device = {
         .name           = "bells",
         .id             = 0,
 };
 
-static struct platform_device bells_wm5110_device = {
+static struct platform_device bells_wm5102_device = {
         .name           = "bells",
         .id             = 1,
 };
 
+static struct platform_device bells_wm5110_device = {
+        .name           = "bells",
+        .id             = 2,
+};
+
 static struct regulator_consumer_supply wallvdd_consumers[] = {
         REGULATOR_SUPPLY("SPKVDD", "1-001a"),
         REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
@@ -304,6 +309,13 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
         REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
         REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 
+        REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
+        REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
+        REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"),
+        REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"),
+        REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"),
+        REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"),
+
         REGULATOR_SUPPLY("DC1VDD", "0-0034"),
         REGULATOR_SUPPLY("DC2VDD", "0-0034"),
         REGULATOR_SUPPLY("DC3VDD", "0-0034"),
@@ -321,6 +333,16 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
         REGULATOR_SUPPLY("DC1VDD", "1-0034"),
         REGULATOR_SUPPLY("DC2VDD", "1-0034"),
         REGULATOR_SUPPLY("DC3VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO1VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO2VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO4VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO5VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO6VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO7VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO8VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO9VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO10VDD", "1-0034"),
+        REGULATOR_SUPPLY("LDO11VDD", "1-0034"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -369,6 +391,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
         &tobermory_device,
         &littlemill_device,
         &lowland_device,
+        &bells_wm2200_device,
         &bells_wm5102_device,
         &bells_wm5110_device,
         &wallvdd_device,
@@ -597,6 +620,7 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
 static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
         REGULATOR_SUPPLY("DCVDD", "spi0.0"),
         REGULATOR_SUPPLY("AVDD", "spi0.0"),
+        REGULATOR_SUPPLY("AVDD", "spi0.1"),
 };
 
 static struct regulator_init_data pvdd_1v2 __devinitdata = {
@@ -621,6 +645,24 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
         REGULATOR_SUPPLY("DCVDD", "1-001a"),
         REGULATOR_SUPPLY("AVDD", "1-001a"),
         REGULATOR_SUPPLY("DBVDD", "spi0.0"),
+
+        REGULATOR_SUPPLY("DBVDD", "1-003a"),
+        REGULATOR_SUPPLY("LDOVDD", "1-003a"),
+        REGULATOR_SUPPLY("CPVDD", "1-003a"),
+        REGULATOR_SUPPLY("AVDD", "1-003a"),
+        REGULATOR_SUPPLY("DBVDD1", "spi0.1"),
+        REGULATOR_SUPPLY("DBVDD2", "spi0.1"),
+        REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
+        REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
+        REGULATOR_SUPPLY("CPVDD", "spi0.1"),
+
+        REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"),
+        REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"),
+        REGULATOR_SUPPLY("CPVDD", "wm5102-codec"),
+
+        REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"),
+        REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"),
+        REGULATOR_SUPPLY("CPVDD", "wm5110-codec"),
 };
 
 static struct regulator_init_data pvdd_1v8 __devinitdata = {
@@ -685,6 +727,7 @@ static struct i2c_board_info i2c_devs1[] __devinitdata = {
           .irq = S3C_EINT(0),
           .platform_data = &glenfarclas_pmic_pdata },
 
+        { I2C_BOARD_INFO("wlf-gf-module", 0x20) },
         { I2C_BOARD_INFO("wlf-gf-module", 0x22) },
         { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
         { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
@@ -810,7 +853,7 @@ static void __init crag6410_machine_init(void)
         i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
         samsung_keypad_set_platdata(&crag6410_keypad_data);
-        s3c64xx_spi0_set_platdata(NULL, 0, 1);
+        s3c64xx_spi0_set_platdata(NULL, 0, 2);
 
         platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 546e40a9dcaf..4eddca14ae07 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -38,17 +38,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_G3EVM
-        bool "G3EVM board"
-        depends on ARCH_SH7367
-        select ARCH_REQUIRE_GPIOLIB
-
-config MACH_G4EVM
-        bool "G4EVM board"
-        depends on ARCH_SH7377
-        select ARCH_REQUIRE_GPIOLIB
-        select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_AP4EVB
         bool "AP4EVB board"
         depends on ARCH_SH7372
@@ -83,6 +72,7 @@ config MACH_MACKEREL
         select ARCH_REQUIRE_GPIOLIB
         select REGULATOR_FIXED_VOLTAGE if REGULATOR
         select SND_SOC_AK4642 if SND_SIMPLE_CARD
+        select USE_OF
 
 config MACH_KOTA2
         bool "KOTA2 board"
@@ -134,8 +124,7 @@ menu "Memory configuration"
 
 config MEMORY_START
         hex "Physical memory start address"
-        default "0x50000000" if MACH_G3EVM
-        default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
+        default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
                                 MACH_MACKEREL || MACH_BONITO || \
                                 MACH_ARMADILLO800EVA
         default "0x41000000" if MACH_KOTA2
@@ -147,8 +136,6 @@ config MEMORY_START
 
 config MEMORY_SIZE
         hex "Physical memory size"
-        default "0x08000000" if MACH_G3EVM
-        default "0x08000000" if MACH_G4EVM
         default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
                                 MACH_ARMADILLO800EVA
         default "0x1e000000" if MACH_KOTA2
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index f4fd247bde61..0b7147928aa3 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -39,8 +39,6 @@ obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)      += pm-r8a7779.o
 
 # Board objects
-obj-$(CONFIG_MACH_G3EVM)        += board-g3evm.o
-obj-$(CONFIG_MACH_G4EVM)        += board-g4evm.o
 obj-$(CONFIG_MACH_AP4EVB)       += board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)       += board-ag5evm.o
 obj-$(CONFIG_MACH_MACKEREL)     += board-mackerel.o
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 3cc8b1c21da9..499e6e376666 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void)
         shmobile_timer.init = eva_earlytimer_init;
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+        /* Do soft power on reset */
+        writel((1 << 31), RESCNT2);
+}
+
 static const char *eva_boards_compat_dt[] __initdata = {
         "renesas,armadillo800eva",
         NULL,
@@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
         .init_late      = shmobile_init_late,
         .timer          = &shmobile_timer,
         .dt_compat      = eva_boards_compat_dt,
+        .restart        = eva_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
deleted file mode 100644
index b179d4c213bb..000000000000
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * G3EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7367.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/*
- * IrDA
- *
- * S67: 5bit : ON  power
- *    : 6bit : ON  remote control
- *             OFF IrDA
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-        {
-                .name           = "loader",
-                .offset         = 0x00000000,
-                .size           = 512 * 1024,
-        },
-        {
-                .name           = "bootenv",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 512 * 1024,
-        },
-        {
-                .name           = "kernel_ro",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 8 * 1024 * 1024,
-                .mask_flags     = MTD_WRITEABLE,
-        },
-        {
-                .name           = "kernel",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 8 * 1024 * 1024,
-        },
-        {
-                .name           = "data",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = MTDPART_SIZ_FULL,
-        },
-};
-
-static struct physmap_flash_data nor_flash_data = {
-        .width          = 2,
-        .parts          = nor_flash_partitions,
-        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-        [0]     = {
-                .start  = 0x00000000,
-                .end    = 0x08000000 - 1,
-                .flags  = IORESOURCE_MEM,
-        }
-};
-
-static struct platform_device nor_flash_device = {
-        .name           = "physmap-flash",
-        .dev            = {
-                .platform_data  = &nor_flash_data,
-        },
-        .num_resources  = ARRAY_SIZE(nor_flash_resources),
-        .resource       = nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-        if (!power) /* only power-on supported for now */
-                return;
-
-        /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-        __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
-}
-
-static struct r8a66597_platdata usb_host_data = {
-        .on_chip = 1,
-        .port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-        [0] = {
-                .name   = "USBHS",
-                .start  = 0xe6890000,
-                .end    = 0xe68900e5,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0xa20), /* USBHS_USHI0 */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device usb_host_device = {
-        .name           = "r8a66597_hcd",
-        .id             = 0,
-        .dev = {
-                .platform_data          = &usb_host_data,
-                .dma_mask               = NULL,
-                .coherent_dma_mask      = 0xffffffff,
-        },
-        .num_resources  = ARRAY_SIZE(usb_host_resources),
-        .resource       = usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-        .mode           = SH_KEYSC_MODE_5,
-        .scan_timing    = 3,
-        .delay          = 100,
-        .keycodes = {
-                KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-                KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-                KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-                KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-                KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-                KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-        },
-};
-
-static struct resource keysc_resources[] = {
-        [0] = {
-                .name   = "KEYSC",
-                .start  = 0xe61b0000,
-                .end    = 0xe61b000f,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0xbe0), /* KEYSC_KEY */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device keysc_device = {
-        .name           = "sh_keysc",
-        .num_resources  = ARRAY_SIZE(keysc_resources),
-        .resource       = keysc_resources,
-        .dev    = {
-                .platform_data  = &keysc_info,
-        },
-};
-
-static struct mtd_partition nand_partition_info[] = {
-        {
-                .name   = "system",
-                .offset = 0,
-                .size   = 64 * 1024 * 1024,
-        },
-        {
-                .name   = "userdata",
-                .offset = MTDPART_OFS_APPEND,
-                .size   = 128 * 1024 * 1024,
-        },
-        {
-                .name   = "cache",
-                .offset = MTDPART_OFS_APPEND,
-                .size   = 64 * 1024 * 1024,
-        },
-};
-
-static struct resource nand_flash_resources[] = {
-        [0] = {
-                .start  = 0xe6a30000,
-                .end    = 0xe6a3009b,
-                .flags  = IORESOURCE_MEM,
-        }
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
-        .parts          = nand_partition_info,
-        .nr_parts       = ARRAY_SIZE(nand_partition_info),
-        .flcmncr_val    = QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E
-                        | SHBUSSEL | SEL_16BIT,
-};
-
-static struct platform_device nand_flash_device = {
-        .name           = "sh_flctl",
-        .resource       = nand_flash_resources,
-        .num_resources  = ARRAY_SIZE(nand_flash_resources),
-        .dev            = {
-                .platform_data = &nand_flash_data,
-        },
-};
-
-static struct resource irda_resources[] = {
-        [0] = {
-                .start  = 0xE6D00000,
-                .end    = 0xE6D01FD4 - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0x480), /* IRDA */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device irda_device = {
-        .name           = "sh_irda",
-        .id             = -1,
-        .resource       = irda_resources,
-        .num_resources  = ARRAY_SIZE(irda_resources),
-};
-
-static struct platform_device *g3evm_devices[] __initdata = {
-        &nor_flash_device,
-        &usb_host_device,
-        &keysc_device,
-        &nand_flash_device,
-        &irda_device,
-};
-
-static void __init g3evm_init(void)
-{
-        sh7367_pinmux_init();
-
-        /* Lit DS4 LED */
-        gpio_request(GPIO_PORT22, NULL);
-        gpio_direction_output(GPIO_PORT22, 1);
-        gpio_export(GPIO_PORT22, 0);
-
-        /* Lit DS8 LED */
-        gpio_request(GPIO_PORT23, NULL);
-        gpio_direction_output(GPIO_PORT23, 1);
-        gpio_export(GPIO_PORT23, 0);
-
-        /* Lit DS3 LED */
-        gpio_request(GPIO_PORT24, NULL);
-        gpio_direction_output(GPIO_PORT24, 1);
-        gpio_export(GPIO_PORT24, 0);
-
-        /* SCIFA1 */
-        gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
-        gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
-        gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
-        gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
-
-        /* USBHS */
-        gpio_request(GPIO_FN_VBUS0, NULL);
-        gpio_request(GPIO_FN_PWEN, NULL);
-        gpio_request(GPIO_FN_OVCN, NULL);
-        gpio_request(GPIO_FN_OVCN2, NULL);
-        gpio_request(GPIO_FN_EXTLP, NULL);
-        gpio_request(GPIO_FN_IDIN, NULL);
-
-        /* setup USB phy */
-        __raw_writew(0x0300, IOMEM(0xe605810a));        /* USBCR1 */
-        __raw_writew(0x00e0, IOMEM(0xe60581c0));        /* CPFCH */
-        __raw_writew(0x6010, IOMEM(0xe60581c6));        /* CGPOSR */
-        __raw_writew(0x8a0a, IOMEM(0xe605810c));        /* USBCR2 */
-
-        /* KEYSC @ CN7 */
-        gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
-        gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL);
-        gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL);
-        gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL);
-        gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL);
-        gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL);
-        gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL);
-        gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL);
-        gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL);
-        gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL);
-        gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL);
-        gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL);
-        gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL);
-
-        /* FLCTL */
-        gpio_request(GPIO_FN_FCE0, NULL);
-        gpio_request(GPIO_FN_D0_ED0_NAF0, NULL);
-        gpio_request(GPIO_FN_D1_ED1_NAF1, NULL);
-        gpio_request(GPIO_FN_D2_ED2_NAF2, NULL);
-        gpio_request(GPIO_FN_D3_ED3_NAF3, NULL);
-        gpio_request(GPIO_FN_D4_ED4_NAF4, NULL);
-        gpio_request(GPIO_FN_D5_ED5_NAF5, NULL);
-        gpio_request(GPIO_FN_D6_ED6_NAF6, NULL);
-        gpio_request(GPIO_FN_D7_ED7_NAF7, NULL);
-        gpio_request(GPIO_FN_D8_ED8_NAF8, NULL);
-        gpio_request(GPIO_FN_D9_ED9_NAF9, NULL);
-        gpio_request(GPIO_FN_D10_ED10_NAF10, NULL);
-        gpio_request(GPIO_FN_D11_ED11_NAF11, NULL);
-        gpio_request(GPIO_FN_D12_ED12_NAF12, NULL);
-        gpio_request(GPIO_FN_D13_ED13_NAF13, NULL);
-        gpio_request(GPIO_FN_D14_ED14_NAF14, NULL);
-        gpio_request(GPIO_FN_D15_ED15_NAF15, NULL);
-        gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
-        gpio_request(GPIO_FN_FRB, NULL);
-        /* FOE, FCDE, FSC on dedicated pins */
-        __raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048));
-
-        /* IrDA */
-        gpio_request(GPIO_FN_IRDA_OUT, NULL);
-        gpio_request(GPIO_FN_IRDA_IN, NULL);
-        gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
-
-        sh7367_add_standard_devices();
-
-        platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
-}
-
-MACHINE_START(G3EVM, "g3evm")
-        .map_io         = sh7367_map_io,
-        .init_early     = sh7367_add_early_devices,
-        .init_irq       = sh7367_init_irq,
-        .handle_irq     = shmobile_handle_irq_intc,
-        .init_machine   = g3evm_init,
-        .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
deleted file mode 100644
index 35c126caa4d8..000000000000
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * G4EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7377.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "sh-gpio.h"
-
-/*
- * SDHI
- *
- * SDHI0 : card detection is possible
- * SDHI1 : card detection is impossible
- *
- * [G4-MAIN-BOARD]
- * JP74 : short         # DBG_2V8A    for SDHI0
- * JP75 : NC            # DBG_3V3A    for SDHI0
- * JP76 : NC            # DBG_3V3A_SD for SDHI0
- * JP77 : NC            # 3V3A_SDIO   for SDHI1
- * JP78 : short         # DBG_2V8A    for SDHI1
- * JP79 : NC            # DBG_3V3A    for SDHI1
- * JP80 : NC            # DBG_3V3A_SD for SDHI1
- *
- * [G4-CORE-BOARD]
- * S32 : all off        # to dissever from G3-CORE_DBG board
- * S33 : all off        # to dissever from G3-CORE_DBG board
- *
- * [G3-CORE_DBG-BOARD]
- * S1  : all off        # to dissever from G3-CORE_DBG board
- * S3  : all off        # to dissever from G3-CORE_DBG board
- * S4  : all off        # to dissever from G3-CORE_DBG board
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-        {
-                .name           = "loader",
-                .offset         = 0x00000000,
-                .size           = 512 * 1024,
-        },
-        {
-                .name           = "bootenv",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 512 * 1024,
-        },
-        {
-                .name           = "kernel_ro",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 8 * 1024 * 1024,
-                .mask_flags     = MTD_WRITEABLE,
-        },
-        {
-                .name           = "kernel",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = 8 * 1024 * 1024,
-        },
-        {
-                .name           = "data",
-                .offset         = MTDPART_OFS_APPEND,
-                .size           = MTDPART_SIZ_FULL,
-        },
-};
-
-static struct physmap_flash_data nor_flash_data = {
-        .width          = 2,
-        .parts          = nor_flash_partitions,
-        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-        [0]     = {
-                .start  = 0x00000000,
-                .end    = 0x08000000 - 1,
-                .flags  = IORESOURCE_MEM,
-        }
-};
-
-static struct platform_device nor_flash_device = {
-        .name           = "physmap-flash",
-        .dev            = {
-                .platform_data  = &nor_flash_data,
-        },
-        .num_resources  = ARRAY_SIZE(nor_flash_resources),
-        .resource       = nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-        if (!power) /* only power-on supported for now */
-                return;
-
-        /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-        __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
-}
-
-static struct r8a66597_platdata usb_host_data = {
-        .on_chip = 1,
-        .port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-        [0] = {
-                .name   = "USBHS",
-                .start  = 0xe6890000,
-                .end    = 0xe68900e5,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0x0a20), /* USBHS_USHI0 */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device usb_host_device = {
-        .name           = "r8a66597_hcd",
-        .id             = 0,
-        .dev = {
-                .platform_data          = &usb_host_data,
-                .dma_mask               = NULL,
-                .coherent_dma_mask      = 0xffffffff,
-        },
-        .num_resources  = ARRAY_SIZE(usb_host_resources),
-        .resource       = usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-        .mode           = SH_KEYSC_MODE_5,
-        .scan_timing    = 3,
-        .delay          = 100,
-        .keycodes = {
-                KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
-                KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
-                KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
-                KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
-                KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
-                KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
-                KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-        },
-};
-
-static struct resource keysc_resources[] = {
-        [0] = {
-                .name   = "KEYSC",
-                .start  = 0xe61b0000,
-                .end    = 0xe61b000f,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0x0be0), /* KEYSC_KEY */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device keysc_device = {
-        .name           = "sh_keysc",
-        .id             = 0, /* keysc0 clock */
-        .num_resources  = ARRAY_SIZE(keysc_resources),
-        .resource       = keysc_resources,
-        .dev    = {
-                .platform_data  = &keysc_info,
-        },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-        REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-        REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-        REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-        REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-/* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-        .tmio_caps      = MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-        [0] = {
-                .name   = "SDHI0",
-                .start  = 0xe6d50000,
-                .end    = 0xe6d500ff,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0x0e00), /* SDHI0 */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device sdhi0_device = {
-        .name           = "sh_mobile_sdhi",
-        .num_resources  = ARRAY_SIZE(sdhi0_resources),
-        .resource       = sdhi0_resources,
-        .id             = 0,
-        .dev    = {
-                .platform_data  = &sdhi0_info,
-        },
-};
-
-static struct sh_mobile_sdhi_info sdhi1_info = {
-        .tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi1_resources[] = {
-        [0] = {
-                .name   = "SDHI1",
-                .start  = 0xe6d60000,
-                .end    = 0xe6d600ff,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = evt2irq(0x0e80), /* SDHI1 */
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device sdhi1_device = {
-        .name           = "sh_mobile_sdhi",
-        .num_resources  = ARRAY_SIZE(sdhi1_resources),
-        .resource       = sdhi1_resources,
-        .id             = 1,
-        .dev    = {
-                .platform_data  = &sdhi1_info,
-        },
-};
-
-static struct platform_device *g4evm_devices[] __initdata = {
-        &nor_flash_device,
-        &usb_host_device,
-        &keysc_device,
-        &sdhi0_device,
-        &sdhi1_device,
-};
-
-#define GPIO_SDHID0_D0  IOMEM(0xe60520fc)
-#define GPIO_SDHID0_D1  IOMEM(0xe60520fd)
-#define GPIO_SDHID0_D2  IOMEM(0xe60520fe)
-#define GPIO_SDHID0_D3  IOMEM(0xe60520ff)
-#define GPIO_SDHICMD0   IOMEM(0xe6052100)
-
-#define GPIO_SDHID1_D0  IOMEM(0xe6052103)
-#define GPIO_SDHID1_D1  IOMEM(0xe6052104)
-#define GPIO_SDHID1_D2  IOMEM(0xe6052105)
-#define GPIO_SDHID1_D3  IOMEM(0xe6052106)
-#define GPIO_SDHICMD1   IOMEM(0xe6052107)
-
-static void __init g4evm_init(void)
-{
-        regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-                                     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-        sh7377_pinmux_init();
-
-        /* Lit DS14 LED */
-        gpio_request(GPIO_PORT109, NULL);
-        gpio_direction_output(GPIO_PORT109, 1);
-        gpio_export(GPIO_PORT109, 1);
-
-        /* Lit DS15 LED */
-        gpio_request(GPIO_PORT110, NULL);
-        gpio_direction_output(GPIO_PORT110, 1);
-        gpio_export(GPIO_PORT110, 1);
-
-        /* Lit DS16 LED */
-        gpio_request(GPIO_PORT112, NULL);
-        gpio_direction_output(GPIO_PORT112, 1);
-        gpio_export(GPIO_PORT112, 1);
-
-        /* Lit DS17 LED */
-        gpio_request(GPIO_PORT113, NULL);
-        gpio_direction_output(GPIO_PORT113, 1);
-        gpio_export(GPIO_PORT113, 1);
-
-        /* USBHS */
-        gpio_request(GPIO_FN_VBUS_0, NULL);
-        gpio_request(GPIO_FN_PWEN, NULL);
-        gpio_request(GPIO_FN_OVCN, NULL);
-        gpio_request(GPIO_FN_OVCN2, NULL);
-        gpio_request(GPIO_FN_EXTLP, NULL);
-        gpio_request(GPIO_FN_IDIN, NULL);
-
-        /* setup USB phy */
-        __raw_writew(0x0200, IOMEM(0xe605810a));       /* USBCR1 */
-        __raw_writew(0x00e0, IOMEM(0xe60581c0));       /* CPFCH */
-        __raw_writew(0x6010, IOMEM(0xe60581c6));       /* CGPOSR */
-        __raw_writew(0x8a0a, IOMEM(0xe605810c));       /* USBCR2 */
-
-        /* KEYSC @ CN31 */
-        gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
-        gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
-        gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
-        gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
-        gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
-        gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
-        gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
-        gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
-        gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
-        gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
-        gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
-        gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
-        gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
-
-        /* SDHI0 */
-        gpio_request(GPIO_FN_SDHICLK0, NULL);
-        gpio_request(GPIO_FN_SDHICD0, NULL);
-        gpio_request(GPIO_FN_SDHID0_0, NULL);
-        gpio_request(GPIO_FN_SDHID0_1, NULL);
-        gpio_request(GPIO_FN_SDHID0_2, NULL);
-        gpio_request(GPIO_FN_SDHID0_3, NULL);
-        gpio_request(GPIO_FN_SDHICMD0, NULL);
-        gpio_request(GPIO_FN_SDHIWP0, NULL);
-        gpio_request_pullup(GPIO_SDHID0_D0);
-        gpio_request_pullup(GPIO_SDHID0_D1);
-        gpio_request_pullup(GPIO_SDHID0_D2);
-        gpio_request_pullup(GPIO_SDHID0_D3);
-        gpio_request_pullup(GPIO_SDHICMD0);
-
-        /* SDHI1 */
-        gpio_request(GPIO_FN_SDHICLK1, NULL);
-        gpio_request(GPIO_FN_SDHID1_0, NULL);
-        gpio_request(GPIO_FN_SDHID1_1, NULL);
-        gpio_request(GPIO_FN_SDHID1_2, NULL);
-        gpio_request(GPIO_FN_SDHID1_3, NULL);
-        gpio_request(GPIO_FN_SDHICMD1, NULL);
-        gpio_request_pullup(GPIO_SDHID1_D0);
-        gpio_request_pullup(GPIO_SDHID1_D1);
-        gpio_request_pullup(GPIO_SDHID1_D2);
-        gpio_request_pullup(GPIO_SDHID1_D3);
-        gpio_request_pullup(GPIO_SDHICMD1);
-
-        sh7377_add_standard_devices();
-
-        platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
-}
-
-MACHINE_START(G4EVM, "g4evm")
-        .map_io         = sh7377_map_io,
-        .init_early     = sh7377_add_early_devices,
-        .init_irq       = sh7377_init_irq,
-        .handle_irq     = shmobile_handle_irq_intc,
-        .init_machine   = g4evm_init,
-        .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 7a05de794a8c..c02448d6847f 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] =
 
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
+        .dma_slave_tx   = SHDMA_SLAVE_SDHI0_TX,
+        .dma_slave_rx   = SHDMA_SLAVE_SDHI0_RX,
         .tmio_flags     = TMIO_MMC_HAS_IDLE_WAIT,
         .tmio_caps      = MMC_CAP_SD_HIGHSPEED,
         .tmio_ocr_mask  = MMC_VDD_27_28 | MMC_VDD_28_29,
@@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = {
 
 /* Micro SD */
 static struct sh_mobile_sdhi_info sdhi2_info = {
+        .dma_slave_tx   = SHDMA_SLAVE_SDHI2_TX,
+        .dma_slave_rx   = SHDMA_SLAVE_SDHI2_RX,
         .tmio_flags     = TMIO_MMC_HAS_IDLE_WAIT |
                           TMIO_MMC_USE_GPIO_CD |
                           TMIO_MMC_WRPROTECT_DISABLE,
@@ -556,7 +560,15 @@ static struct i2c_board_info i2c0_devices[] = {
         },
         {
                 I2C_BOARD_INFO("r2025sd", 0x32),
-        }
+        },
+        {
+                I2C_BOARD_INFO("ak8975", 0x0c),
+                .irq = intcs_evt2irq(0x3380), /* IRQ28 */
+        },
+        {
+                I2C_BOARD_INFO("adxl34x", 0x1d),
+                .irq = intcs_evt2irq(0x3340), /* IRQ26 */
+        },
 };
 
 static struct i2c_board_info i2c1_devices[] = {
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index c826d77ab8a6..f274252e4705 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1651,7 +1651,12 @@ static void __init mackerel_init(void)
         pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
 }
 
-MACHINE_START(MACKEREL, "mackerel")
+static const char *mackerel_boards_compat_dt[] __initdata = {
+        "renesas,mackerel",
+        NULL,
+};
+
+DT_MACHINE_START(MACKEREL_DT, "mackerel")
         .map_io         = sh7372_map_io,
         .init_early     = sh7372_add_early_devices,
         .init_irq       = sh7372_init_irq,
@@ -1659,4 +1664,5 @@ MACHINE_START(MACKEREL, "mackerel")
         .init_machine   = mackerel_init,
         .init_late      = sh7372_pm_init_late,
         .timer          = &shmobile_timer,
+        .dt_compat  = mackerel_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b8a7525a4e2f..69f7f464eff8 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
@@ -126,10 +128,27 @@ static struct platform_device thermal_device = {
         .num_resources  = ARRAY_SIZE(thermal_resources),
 };
 
+/* HSPI */
+static struct resource hspi_resources[] = {
+        [0] = {
+                .start          = 0xFFFC7000,
+                .end            = 0xFFFC7018 - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device hspi_device = {
+        .name   = "sh-hspi",
+        .id     = 0,
+        .resource       = hspi_resources,
+        .num_resources  = ARRAY_SIZE(hspi_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
         &eth_device,
         &sdhi0_device,
         &thermal_device,
+        &hspi_device,
 };
 
 static void __init marzen_init(void)
@@ -163,6 +182,12 @@ static void __init marzen_init(void)
         gpio_request(GPIO_FN_SD0_CD, NULL);
         gpio_request(GPIO_FN_SD0_WP, NULL);
 
+        /* HSPI 0 */
+        gpio_request(GPIO_FN_HSPI_CLK0, NULL);
+        gpio_request(GPIO_FN_HSPI_CS0,  NULL);
+        gpio_request(GPIO_FN_HSPI_TX0,  NULL);
+        gpio_request(GPIO_FN_HSPI_RX0,  NULL);
+
         r8a7779_add_standard_devices();
         platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }