26 files changed, 193 insertions, 154 deletions

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index bbbaeb0abcd3..06808434ea04 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1      INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE         IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE         OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
 
 static struct resource mbox_resources[] = {
         {
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 9ed5e2c1de4d..c4f05bdcf8a6 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE             IO_ADDRESS(0xfffece00)
+#define CLKGEN_REG_ASM_BASE             OMAP1_IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET          0x04
 #define ARM_IDLECT2_ASM_OFFSET          0x08
 
-#define TCMIF_ASM_BASE                  IO_ADDRESS(0xfffecc00)
+#define TCMIF_ASM_BASE                  OMAP1_IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET         0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET   0x20
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index f754cee4f3c3..6f54b2c591cf 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
         {
-                .membase        = IO_ADDRESS(OMAP_UART1_BASE),
+                .membase        = OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
                 .mapbase        = OMAP_UART1_BASE,
                 .irq            = INT_UART1,
                 .flags          = UPF_BOOT_AUTOCONF,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
         },
         {
-                .membase        = IO_ADDRESS(OMAP_UART2_BASE),
+                .membase        = OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
                 .mapbase        = OMAP_UART2_BASE,
                 .irq            = INT_UART2,
                 .flags          = UPF_BOOT_AUTOCONF,
@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
         },
         {
-                .membase        = IO_ADDRESS(OMAP_UART3_BASE),
+                .membase        = OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
                 .mapbase        = OMAP_UART3_BASE,
                 .irq            = INT_UART3,
                 .flags          = UPF_BOOT_AUTOCONF,
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 261cdc48228b..7724e520d07c 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -21,13 +21,13 @@
 ENTRY(omap1_sram_reprogram_clock)
         stmfd   sp!, {r0 - r12, lr}             @ save registers on stack
 
-        mov     r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
-        orr     r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-        orr     r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+        mov     r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+        orr     r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+        orr     r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
 
-        mov     r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
-        orr     r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-        orr     r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+        mov     r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+        orr     r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+        orr     r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
 
         tst     r0, #1 << 4                     @ want lock mode?
         beq     newck                           @ nope
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d56408d3cff..1be6a214d88d 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -62,8 +62,8 @@ typedef struct {
         u32 read_tim;                   /* READ_TIM,   R */
 } omap_mpu_timer_regs_t;
 
-#define omap_mpu_timer_base(n)                                          \
-((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +      \
+#define omap_mpu_timer_base(n)                                                  \
+((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +        \
                                  (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long omap_mpu_timer_read(int nr)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index b0c7402248f7..bdfda36d8aa8 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -53,8 +53,8 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
-        gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-        gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+        gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+        gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 }
 
 static void __init omap_4430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index f3c91a1ca391..18d9a121aa7a 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)                                \
-                        IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+                        OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)                                \
-                        IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+                        OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)                                \
-                        IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+                        OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global CM registers
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8fe8d230f21b..48ee295db275 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
          * for us: do so
          */
 
-        gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+        gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 
         /*
          * Synchronise with the boot thread.
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 6cc375a275be..da3a53f8ccc8 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -48,7 +48,7 @@ int omap2_pm_debug;
         regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
         regs[reg_count].name = #reg; \
-        regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+        regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
 
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 9937e2814696..03c467c35f54 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)                               \
-                        IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+                        OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)                               \
-                        IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+                        OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)                               \
-                        IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+                        OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1a8bbd094066..0837eda5f2b6 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
         return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)      IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)      IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)      IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)      OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)      OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)      OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif  /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a7421a50410b..42449002f60d 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
         {
-                .membase        = IO_ADDRESS(OMAP_UART1_BASE),
+                .membase        = OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
                 .mapbase        = OMAP_UART1_BASE,
                 .irq            = 72,
                 .flags          = UPF_BOOT_AUTOCONF,
@@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
         {
-                .membase        = IO_ADDRESS(OMAP_UART2_BASE),
+                .membase        = OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
                 .mapbase        = OMAP_UART2_BASE,
                 .irq            = 73,
                 .flags          = UPF_BOOT_AUTOCONF,
@@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
         {
-                .membase        = IO_ADDRESS(OMAP_UART3_BASE),
+                .membase        = OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
                 .mapbase        = OMAP_UART3_BASE,
                 .irq            = 74,
                 .flags          = UPF_BOOT_AUTOCONF,
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index bb299851116d..9b62208658bc 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
         .word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-        .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+        .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
         .word   . - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
         .word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-        .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+        .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
         .word   . - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 9955abcaeb31..df2cd9277c00 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
         .word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-        .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+        .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
         .word   . - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
         .word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-        .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+        .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
         .word   . - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 97eeeebcb066..e2338c0aebcf 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-        twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+        twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
 #endif
         omap_dm_timer_init();
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e3ac94f09006..bf0863462101 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2337,16 +2337,16 @@ static int __init omap_init_dma(void)
         int ch, r;
 
         if (cpu_class_is_omap1()) {
-                omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
+                omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
                 dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
         } else if (cpu_is_omap24xx()) {
-                omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
+                omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
                 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
         } else if (cpu_is_omap34xx()) {
-                omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
+                omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
                 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
         } else if (cpu_is_omap44xx()) {
-                omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+                omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
                 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
         } else {
                 pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 7f50b6103dee..d325b54daeb5 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
 
         for (i = 0; i < dm_timer_count; i++) {
                 timer = &dm_timers[i];
-                timer->io_base = IO_ADDRESS(timer->phys_base);
+                if (cpu_class_is_omap1())
+                        timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+                else
+                        timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
                                         defined(CONFIG_ARCH_OMAP4)
                 if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9298bc0ab171..fd63dd3bf4cd 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE              IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE              OMAP1_IO_ADDRESS(0xfffce000)
 #define OMAP1510_GPIO_DATA_INPUT        0x00
 #define OMAP1510_GPIO_DATA_OUTPUT       0x04
 #define OMAP1510_GPIO_DIR_CONTROL       0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE             IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE             IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE             IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE             IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE             OMAP1_IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE             OMAP1_IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE             OMAP1_IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE             OMAP1_IO_ADDRESS(0xfffbbc00)
 #define OMAP1610_GPIO_REVISION          0x0000
 #define OMAP1610_GPIO_SYSCONFIG         0x0010
 #define OMAP1610_GPIO_SYSSTATUS         0x0014
@@ -70,12 +70,12 @@
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE              IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE              IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE              IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE              IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE              IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE              IO_ADDRESS(0xfffbe800)
+#define OMAP730_GPIO1_BASE              OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE              OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE              OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE              OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE              OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE              OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP730_GPIO_DATA_INPUT         0x00
 #define OMAP730_GPIO_DATA_OUTPUT        0x04
 #define OMAP730_GPIO_DIR_CONTROL        0x08
@@ -86,12 +86,12 @@
 /*
  * OMAP850 specific GPIO registers
  */
-#define OMAP850_GPIO1_BASE              IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE              IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE              IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE              IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE              IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE              IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO1_BASE              OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE              OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE              OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE              OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE              OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE              OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP850_GPIO_DATA_INPUT         0x00
 #define OMAP850_GPIO_DATA_OUTPUT        0x04
 #define OMAP850_GPIO_DIR_CONTROL        0x08
@@ -99,19 +99,21 @@
 #define OMAP850_GPIO_INT_MASK           0x10
 #define OMAP850_GPIO_INT_STATUS         0x14
 
+#define OMAP1_MPUIO_VBASE               OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE             IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE             IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE             IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE             IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE             OMAP2_IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE             OMAP2_IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE             OMAP2_IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE             OMAP2_IO_ADDRESS(0x4801e000)
 
-#define OMAP243X_GPIO1_BASE             IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE             IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE             IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE             IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE             IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE             OMAP2_IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE             OMAP2_IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE             OMAP2_IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE             OMAP2_IO_ADDRESS(0x480B6000)
 
 #define OMAP24XX_GPIO_REVISION          0x0000
 #define OMAP24XX_GPIO_SYSCONFIG         0x0010
@@ -142,24 +144,22 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE             IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE             IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE             IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE             IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE             IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE             IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x49058000)
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
-
-#define OMAP_MPUIO_VBASE                IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
 
 struct gpio_bank {
         void __iomem *base;
@@ -195,7 +195,7 @@ struct gpio_bank {
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-        { OMAP_MPUIO_VBASE,    INT_MPUIO,           IH_MPUIO_BASE,     METHOD_MPUIO},
+        { OMAP1_MPUIO_VBASE,    INT_MPUIO,          IH_MPUIO_BASE,     METHOD_MPUIO},
         { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,      IH_GPIO_BASE,      METHOD_GPIO_1610 },
         { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
         { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -205,14 +205,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-        { OMAP_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
+        { OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
         { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct gpio_bank gpio_bank_730[7] = {
-        { OMAP_MPUIO_VBASE,    INT_730_MPUIO,       IH_MPUIO_BASE,      METHOD_MPUIO },
+        { OMAP1_MPUIO_VBASE,    INT_730_MPUIO,      IH_MPUIO_BASE,      METHOD_MPUIO },
         { OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,       METHOD_GPIO_730 },
         { OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,  METHOD_GPIO_730 },
         { OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,  METHOD_GPIO_730 },
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 8140dbccb7bc..826d317cdbec 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -20,15 +20,15 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)                                      \
-        IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+        OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)                                      \
-        IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+        OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)                                      \
-        IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+        OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)      IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)      IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)      IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)      OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)      OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)      OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 56426ed45ef4..a5592991634d 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
                 .endm
 
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =IO_ADDRESS(OMAP_IH1_BASE)
+                ldr     \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
                 ldr     \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
                 ldr     \tmp, [\base, #IRQ_MIR_REG_OFFSET]
                 mov     \irqstat, #0xffffffff
@@ -53,7 +53,7 @@
                 cmp     \irqnr, #0
                 ldreq   \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
                 cmpeq   \irqnr, #INT_IH2_IRQ
-                ldreq   \base, =IO_ADDRESS(OMAP_IH2_BASE)
+                ldreq   \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
                 ldreq   \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
                 addeqs  \irqnr, \irqnr, #32
 1510:
@@ -68,9 +68,9 @@
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE                IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE                OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE                IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE                OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
 #include <mach/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 21fb0efdda86..55659809478e 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -54,15 +54,23 @@
  * ----------------------------------------------------------------------------
  */
 
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                (x)
+#else
+#define IOMEM(x)                ((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET         0x01000000      /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)    IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_IO_OFFSET         0x90000000
+#define OMAP2_IO_ADDRESS(pa)    IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+
 #if defined(CONFIG_ARCH_OMAP1)
 
 #define IO_PHYS                 0xFFFB0000
-#define IO_OFFSET               0x01000000      /* Virtual IO = 0xfefb0000 */
 #define IO_SIZE                 0x40000
-#define IO_VIRT                 (IO_PHYS - IO_OFFSET)
-#define __IO_ADDRESS(pa)        ((pa) - IO_OFFSET)
-#define __OMAP1_IO_ADDRESS(pa)  ((pa) - IO_OFFSET)
-#define io_v2p(va)              ((va) + IO_OFFSET)
+#define IO_VIRT                 (IO_PHYS - OMAP1_IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
 
@@ -87,11 +95,6 @@
 #define OMAP243X_SMS_VIRT       0xFC000000
 #define OMAP243X_SMS_SIZE       SZ_1M
 
-#define IO_OFFSET               0x90000000
-#define __IO_ADDRESS(pa)        ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)  ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
-#define io_v2p(va)              ((va) - IO_OFFSET)      /* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_24XX_PHYS       OMAP2420_DSP_MEM_BASE   /* 0x58000000 */
 #define DSP_MEM_24XX_VIRT       0xe0000000
@@ -143,12 +146,6 @@
 #define OMAP343X_SDRC_VIRT      0xFD000000
 #define OMAP343X_SDRC_SIZE      SZ_1M
 
-
-#define IO_OFFSET               0x90000000
-#define __IO_ADDRESS(pa)        ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)  ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)              ((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_34XX_PHYS       OMAP34XX_DSP_MEM_BASE   /* 0x58000000 */
 #define DSP_MEM_34XX_VIRT       0xe0000000
@@ -188,39 +185,20 @@
 #define OMAP44XX_GPMC_VIRT      0xe0000000
 #define OMAP44XX_GPMC_SIZE      SZ_1M
 
-
-#define IO_OFFSET               0x90000000
-#define __IO_ADDRESS(pa)        ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)  ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)              ((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 #endif
 
-#define IO_ADDRESS(pa)          IOMEM(__IO_ADDRESS(pa))
-#define OMAP1_IO_ADDRESS(pa)    IOMEM(__OMAP1_IO_ADDRESS(pa))
-#define OMAP2_IO_ADDRESS(pa)    IOMEM(__OMAP2_IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)                (x)
-#else
-#define IOMEM(x)                ((void __force __iomem *)(x))
+#ifndef __ASSEMBLER__
 
 /*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *       - Use __raw_read/write[bwl]() for virtual register addresses
- *       - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *       - DO NOT use hardcoded virtual addresses to allow changing the
- *         IO address space again if needed
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
-#define omap_readb(a)           __raw_readb(IO_ADDRESS(a))
-#define omap_readw(a)           __raw_readw(IO_ADDRESS(a))
-#define omap_readl(a)           __raw_readl(IO_ADDRESS(a))
 
-#define omap_writeb(v,a)        __raw_writeb(v, IO_ADDRESS(a))
-#define omap_writew(v,a)        __raw_writew(v, IO_ADDRESS(a))
-#define omap_writel(v,a)        __raw_writel(v, IO_ADDRESS(a))
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
 
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index 39b591ff54bb..f82a8dcaad94 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -25,7 +25,7 @@ typedef struct {
 } xip_omap_mpu_timer_regs_t;
 
 #define xip_omap_mpu_timer_base(n)                                      \
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +  \
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +    \
         (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long xip_omap_mpu_timer_read(int nr)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
index 15dec7f1c7c0..b3ba5ac7b4a4 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -33,14 +33,14 @@
 #define IRQ_SIR_IRQ                     0x0040
 #define OMAP44XX_GIC_DIST_BASE          0x48241000
 #define OMAP44XX_GIC_CPU_BASE           0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE        IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_VA_GIC_CPU_BASE        OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE               0x48240000
-#define OMAP44XX_VA_SCU_BASE            IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_VA_SCU_BASE            OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE         0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE      IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_VA_LOCAL_TWD_BASE      OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
 #define OMAP44XX_LOCAL_TWD_SIZE         0x00000100
 #define OMAP44XX_WKUPGEN_BASE           0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE        IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+#define OMAP44XX_VA_WKUPGEN_BASE        OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 0be18e4ff182..93f70d2cbce1 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -71,11 +71,11 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)                                       \
-                        (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+                        (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)                                       \
-                        (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+                        (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)                                       \
-                        (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+                        (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 9b42d72d96cf..d491ad15f198 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr)
                 __iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+        if (cpu_class_is_omap1())
+                return __raw_readb(OMAP1_IO_ADDRESS(pa));
+        else
+                return __raw_readb(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+        if (cpu_class_is_omap1())
+                return __raw_readw(OMAP1_IO_ADDRESS(pa));
+        else
+                return __raw_readw(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+        if (cpu_class_is_omap1())
+                return __raw_readl(OMAP1_IO_ADDRESS(pa));
+        else
+                return __raw_readl(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+        if (cpu_class_is_omap1())
+                __raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+        else
+                __raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+        if (cpu_class_is_omap1())
+                __raw_writew(v, OMAP1_IO_ADDRESS(pa));
+        else
+                __raw_writew(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+        if (cpu_class_is_omap1())
+                __raw_writel(v, OMAP1_IO_ADDRESS(pa));
+        else
+                __raw_writel(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 5eae7876979c..925f64711c37 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -56,16 +56,16 @@
 #define SRAM_BOOTLOADER_SZ      0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0        IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0           IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0          IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0        IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0           IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0          IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2         IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0         IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT        IO_ADDRESS(0x480022F0)
+#define OMAP24XX_VA_REQINFOPERM0        OMAP2_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0           OMAP2_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0          OMAP2_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0        OMAP2_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0           OMAP2_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0          OMAP2_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2         OMAP2_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0         OMAP2_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT        OMAP2_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE               0x300