59 files changed, 0 insertions, 2511 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a29ebfde6077..cba171a5eb03 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -276,24 +276,6 @@ config MOMENCO_OCELOT_3
          The Ocelot-3 is based off Discovery III System Controller and
          PMC-Sierra Rm79000 core.
-config MOMENCO_OCELOT_C
-        bool "Momentum Ocelot-C board"
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
-        select IRQ_CPU
-        select IRQ_MV64340
-        select PCI_MARVELL
-        select RM7000_CPU_SCACHE
-        select SWAP_IO_SPACE
-        select SYS_HAS_CPU_RM7000
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
-        select SYS_SUPPORTS_BIG_ENDIAN
-        select GENERIC_HARDIRQS_NO__DO_IRQ
-        help
-          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-          Momentum Computer <http://www.momenco.com/>.
 config PNX8550_JBS
        bool "Philips PNX8550 based JBS board"
        select PNX8550
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ddb048b8600a..fc09769b3dd4 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -335,14 +335,6 @@ cflags-$(CONFIG_MOMENCO_OCELOT)	+= -Iinclude/asm-mips/mach-ocelot
 load-$(CONFIG_MOMENCO_OCELOT)   += 0xffffffff80100000
 #
-# Momentum Ocelot-C and -CS boards
-#
-# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
-# mips_io_port_base.
-core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/
-load-$(CONFIG_MOMENCO_OCELOT_C) += 0xffffffff80100000
-#
 # PMC-Sierra Yosemite
 #
 core-$(CONFIG_PMC_YOSEMITE)     += arch/mips/pmc-sierra/yosemite/
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 99c54f3da36a..de855d1fc01f 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -35,7 +35,6 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index c885e4fc4e41..bf88a6ce8042 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index a5ebedc1d1de..7582709874c3 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index c70456ede3d5..9c5750c91810 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -21,7 +21,6 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 87e99e5ca84d..bbf007a69105 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 5d46a9982832..384e41afb544 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index e6f4242268fb..76c3c46851a7 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index ea5609339146..89c458086e6e 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 2728a0018b58..c83ba3cc1f05 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index d67f15009efa..7ec230ed225a 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 25e533667504..2a4948a2d7d3 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -35,7 +35,6 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 1257a7016c44..d853278fce65 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index 9318fce31732..31f03f8113ee 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index e35a8f58c071..b1a9e0b3067e 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -36,7 +36,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index c655d4da0c68..2f2243658aad 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index a2475e7e909d..267af44f97ab 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index f95d5fef3a0b..00ec6ed5e550 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index e2f5a5a41792..12c02656013e 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -35,7 +35,6 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 2c88b3295af4..61235a552df2 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index ccf7227cbf98..c427c08efb6c 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -35,7 +35,6 @@ CONFIG_LASAT=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 1c839cf29d86..1f5cf9200846 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -35,7 +35,6 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 559f4d0038b0..ef5cae94c076 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -35,7 +35,6 @@ CONFIG_MIPS_SIM=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 811ada95d729..73a5314603e3 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index a53175a109e7..cc99c83a81d2 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 CONFIG_MOMENCO_OCELOT_3=y
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
deleted file mode 100644
index 38e86f16f856..000000000000
--- a/arch/mips/configs/ocelot_c_defconfig
+++ /dev/null
@@ -1,981 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:36 2007
-#
-CONFIG_MIPS=y
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-CONFIG_MOMENCO_OCELOT_C=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_MV64340=y
-CONFIG_PCI_MARVELL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-CONFIG_CPU_RM7000=y
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-#
-# LED drivers
-#
-#
-# LED Triggers
-#
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-#
-# DMA Clients
-#
-#
-# DMA Devices
-#
-#
-# Auxiliary Display support
-#
-#
-# Virtualization
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-CONFIG_GENERIC_ACL=y
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index f5948e56b848..5f3b47fa3f19 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index e764285aac62..b57662a2a3e3 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 37e2a102f6e2..350f9bdbb5e2 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index b1206a20e7e0..8ea039ab0895 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -36,7 +36,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index e7096449ba26..9c8c54ee5e9d 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_PNX8550_JBS=y
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index a46761f56a12..2f60c5a4286b 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index 93f382b32179..d7ace0857383 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig
index dbb485d499a5..b020e9270147 100644
--- a/arch/mips/configs/rbhma4200_defconfig
+++ b/arch/mips/configs/rbhma4200_defconfig
@@ -33,7 +33,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index c7c28a1616b2..b0abd16fae29 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index f3ee7e179f24..120dcff4942e 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 11f034764812..534de60fd03c 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index 0d055b2d1510..e0185ebdfa8f 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -35,7 +35,6 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index a0cda222254f..11f4c66ea456 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 9b0a1d59eddd..1c54d1bbba7d 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index f8f11dcbb8de..7f2ece3d857c 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 8558348cad3b..ef663304c93d 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 01b05b2a497a..d57d6cca646c 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -35,7 +35,6 @@ CONFIG_WR_PPMC=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 3d40e7c1277b..38349216668f 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 195311dfeae6..9515ed6128ca 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -35,7 +35,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
deleted file mode 100644
index d69161aa1675..000000000000
--- a/arch/mips/momentum/ocelot_c/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Momentum Computer's Ocelot-C and -CS boards.
-#
-obj-y                   += cpci-irq.o irq.o platform.o prom.o reset.o \
-                           setup.o uart-irq.o
-obj-$(CONFIG_KGDB)      += dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
deleted file mode 100644
index 186a140fd2a9..000000000000
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- *
- * arch/mips/momentum/ocelot_c/cpci-irq.c
- *     Interrupt routines for cpci.  Interrupt numbers are assigned from
- *     CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources).
- *
- * Note that the high-level software will need to be careful about using
- * these interrupts.  If this board is asserting a cPCI interrupt, it will
- * also see the asserted interrupt.  Care must be taken to avoid an
- * interrupt flood.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/io.h>
-#include "ocelot_c_fpga.h"
-#define CPCI_IRQ_BASE   8
-static inline int ls1bit8(unsigned int x)
-{
-        int b = 7, s;
-        s =  4; if (((unsigned char)(x <<  4)) == 0) s = 0; b -= s; x <<= s;
-        s =  2; if (((unsigned char)(x <<  2)) == 0) s = 0; b -= s; x <<= s;
-        s =  1; if (((unsigned char)(x <<  1)) == 0) s = 0; b -= s;
-        return b;
-}
-/* mask off an interrupt -- 0 is enable, 1 is disable */
-static inline void mask_cpci_irq(unsigned int irq)
-{
-        uint32_t value;
-        value = OCELOT_FPGA_READ(INTMASK);
-        value |= 1 << (irq - CPCI_IRQ_BASE);
-        OCELOT_FPGA_WRITE(value, INTMASK);
-        /* read the value back to assure that it's really been written */
-        value = OCELOT_FPGA_READ(INTMASK);
-}
-/* unmask an interrupt -- 0 is enable, 1 is disable */
-static inline void unmask_cpci_irq(unsigned int irq)
-{
-        uint32_t value;
-        value = OCELOT_FPGA_READ(INTMASK);
-        value &= ~(1 << (irq - CPCI_IRQ_BASE));
-        OCELOT_FPGA_WRITE(value, INTMASK);
-        /* read the value back to assure that it's really been written */
-        value = OCELOT_FPGA_READ(INTMASK);
-}
-/*
- * Interrupt handler for interrupts coming from the FPGA chip.
- * It could be built in ethernet ports etc...
- */
-void ll_cpci_irq(void)
-{
-        unsigned int irq_src, irq_mask;
-        /* read the interrupt status registers */
-        irq_src = OCELOT_FPGA_READ(INTSTAT);
-        irq_mask = OCELOT_FPGA_READ(INTMASK);
-        /* mask for just the interrupts we want */
-        irq_src &= ~irq_mask;
-        do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE);
-}
-struct irq_chip cpci_irq_type = {
-        .name = "CPCI/FPGA",
-        .ack = mask_cpci_irq,
-        .mask = mask_cpci_irq,
-        .mask_ack = mask_cpci_irq,
-        .unmask = unmask_cpci_irq,
-};
-void cpci_irq_init(void)
-{
-        int i;
-        for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++)
-                set_irq_chip_and_handler(i, &cpci_irq_type, handle_level_irq);
-}
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
deleted file mode 100644
index 32d6fb4ee679..000000000000
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-#include <asm/serial.h> /* For the serial port location and base baud */
-/* --- CONFIG --- */
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-/* --- END OF CONFIG --- */
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-/* ----------------------------------------------------- */
-/* === CONFIG === */
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    OCELOT_SERIAL1_BASE
-#define         MAX_BAUD                OCELOT_BASE_BAUD
-/* === END OF CONFIG === */
-#define         REG_OFFSET              4
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-        /* disable interrupts */
-        UART16550_WRITE(OFS_INTR_ENABLE, 0);
-        /* set up baud rate */
-        {
-                uint32 divisor;
-                /* set DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-                /* set divisor */
-                divisor = MAX_BAUD / baud;
-                UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-                UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-                /* clear DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-        }
-        /* set data format */
-        UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-static int remoteDebugInitialized = 0;
-uint8 getDebugChar(void)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(UART16550_BAUD_38400,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-        return UART16550_READ(OFS_RCV_BUFFER);
-}
-int putDebugChar(uint8 byte)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(UART16550_BAUD_38400,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-        UART16550_WRITE(OFS_SEND_BUFFER, byte);
-        return 1;
-}
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c
deleted file mode 100644
index 844d566c9de3..000000000000
--- a/arch/mips/momentum/ocelot_c/irq.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <linux/mv643xx.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-extern void uart_irq_init(void);
-extern void cpci_irq_init(void);
-static struct irqaction cascade_fpga = {
-        no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL
-};
-static struct irqaction cascade_mv64340 = {
-        no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
-};
-extern void ll_uart_irq(void);
-extern void ll_cpci_irq(void);
-asmlinkage void plat_irq_dispatch(void)
-{
-        unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-        if (pending & STATUSF_IP0)
-                do_IRQ(0);
-        else if (pending & STATUSF_IP1)
-                do_IRQ(1);
-        else if (pending & STATUSF_IP2)
-                do_IRQ(2);
-        else if (pending & STATUSF_IP3)
-                ll_uart_irq();
-        else if (pending & STATUSF_IP4)
-                do_IRQ(4);
-        else if (pending & STATUSF_IP5)
-                ll_cpci_irq();
-        else if (pending & STATUSF_IP6)
-                ll_mv64340_irq();
-        else if (pending & STATUSF_IP7)
-                do_IRQ(7);
-        else
-                spurious_interrupt();
-}
-void __init arch_init_irq(void)
-{
-        /*
-         * Clear all of the interrupts while we change the able around a bit.
-         * int-handler is not on bootstrap
-         */
-        clear_c0_status(ST0_IM);
-        mips_cpu_irq_init();
-        /* set up the cascading interrupts */
-        setup_irq(3, &cascade_fpga);
-        setup_irq(5, &cascade_fpga);
-        setup_irq(6, &cascade_mv64340);
-        mv64340_irq_init(16);
-        uart_irq_init();
-        cpci_irq_init();
-}
diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
deleted file mode 100644
index f0f5581dcb50..000000000000
--- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Ocelot-C Board Register Definitions
- *
- * (C) 2002 Momentum Computer Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Louis Hamilton, Red Hat, Inc.
- *    hamilton@redhat.com  [MIPS64 modifications]
- */
-#ifndef __OCELOT_C_FPGA_H__
-#define __OCELOT_C_FPGA_H__
-#ifdef CONFIG_64BIT
-#define OCELOT_C_CS0_ADDR       (0xfffffffffc000000)
-#else
-#define OCELOT_C_CS0_ADDR               (0xfc000000)
-#endif
-#define OCELOT_C_REG_BOARDREV           0x0
-#define OCELOT_C_REG_FPGA_REV           0x1
-#define OCELOT_C_REG_FPGA_TYPE          0x2
-#define OCELOT_C_REG_RESET_STATUS       0x3
-#define OCELOT_C_REG_BOARD_STATUS       0x4
-#define OCELOT_C_REG_CPCI_ID            0x5
-#define OCELOT_C_REG_SET                0x6
-#define OCELOT_C_REG_CLR                0x7
-#define OCELOT_C_REG_EEPROM_MODE        0x9
-#define OCELOT_C_REG_INTMASK            0xa
-#define OCELOT_C_REG_INTSTAT            0xb
-#define OCELOT_C_REG_UART_INTMASK       0xc
-#define OCELOT_C_REG_UART_INTSTAT       0xd
-#define OCELOT_C_REG_INTSET             0xe
-#define OCELOT_C_REG_INTCLR             0xf
-#define __FPGA_REG_TO_ADDR(reg)                                         \
-        ((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg)
-#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
-#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
-#endif
diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c
deleted file mode 100644
index 7780aa0c6555..000000000000
--- a/arch/mips/momentum/ocelot_c/platform.c
+++ /dev/null
@@ -1,183 +0,0 @@
-#include <linux/delay.h>
-#include <linux/if_ether.h>
-#include <linux/ioport.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include "ocelot_c_fpga.h"
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-static struct resource mv643xx_eth_shared_resources[] = {
-        [0] = {
-                .name   = "ethernet shared base",
-                .start  = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
-                .end    = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
-                                       MV643XX_ETH_SHARED_REGS_SIZE - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-static struct platform_device mv643xx_eth_shared_device = {
-        .name           = MV643XX_ETH_SHARED_NAME,
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(mv643xx_eth_shared_resources),
-        .resource       = mv643xx_eth_shared_resources,
-};
-#define MV_SRAM_BASE                    0xfe000000UL
-#define MV_SRAM_SIZE                    (256 * 1024)
-#define MV_SRAM_RXRING_SIZE             (MV_SRAM_SIZE / 4)
-#define MV_SRAM_TXRING_SIZE             (MV_SRAM_SIZE / 4)
-#define MV_SRAM_BASE_ETH0               MV_SRAM_BASE
-#define MV_SRAM_BASE_ETH1               (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
-#define MV64x60_IRQ_ETH_0 48
-#define MV64x60_IRQ_ETH_1 49
-static struct resource mv64x60_eth0_resources[] = {
-        [0] = {
-                .name   = "eth0 irq",
-                .start  = MV64x60_IRQ_ETH_0,
-                .end    = MV64x60_IRQ_ETH_0,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-static struct mv643xx_eth_platform_data eth0_pd = {
-        .port_number    = 0,
-        .tx_sram_addr   = MV_SRAM_BASE_ETH0,
-        .tx_sram_size   = MV_SRAM_TXRING_SIZE,
-        .tx_queue_size  = MV_SRAM_TXRING_SIZE / 16,
-        .rx_sram_addr   = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
-        .rx_sram_size   = MV_SRAM_RXRING_SIZE,
-        .rx_queue_size  = MV_SRAM_RXRING_SIZE / 16,
-};
-static struct platform_device eth0_device = {
-        .name           = MV643XX_ETH_NAME,
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(mv64x60_eth0_resources),
-        .resource       = mv64x60_eth0_resources,
-        .dev = {
-                .platform_data = &eth0_pd,
-        },
-};
-static struct resource mv64x60_eth1_resources[] = {
-        [0] = {
-                .name   = "eth1 irq",
-                .start  = MV64x60_IRQ_ETH_1,
-                .end    = MV64x60_IRQ_ETH_1,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-static struct mv643xx_eth_platform_data eth1_pd = {
-        .port_number    = 1,
-        .tx_sram_addr   = MV_SRAM_BASE_ETH1,
-        .tx_sram_size   = MV_SRAM_TXRING_SIZE,
-        .tx_queue_size  = MV_SRAM_TXRING_SIZE / 16,
-        .rx_sram_addr   = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
-        .rx_sram_size   = MV_SRAM_RXRING_SIZE,
-        .rx_queue_size  = MV_SRAM_RXRING_SIZE / 16,
-};
-static struct platform_device eth1_device = {
-        .name           = MV643XX_ETH_NAME,
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(mv64x60_eth1_resources),
-        .resource       = mv64x60_eth1_resources,
-        .dev = {
-                .platform_data = &eth1_pd,
-        },
-};
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
-        &mv643xx_eth_shared_device,
-        &eth0_device,
-        &eth1_device,
-        /* The third port is not wired up on the Ocelot C */
-};
-static u8 __init exchange_bit(u8 val, u8 cs)
-{
-        /* place the data */
-        OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
-        udelay(1);
-        /* turn the clock on */
-        OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
-        udelay(1);
-        /* turn the clock off and read-strobe */
-        OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-        /* return the data */
-        return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
-}
-static void __init get_mac(char dest[6])
-{
-        u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-        int i,j;
-        for (i = 0; i < 12; i++)
-                exchange_bit(read_opcode[i], 1);
-        for (j = 0; j < 6; j++) {
-                dest[j] = 0;
-                for (i = 0; i < 8; i++) {
-                        dest[j] <<= 1;
-                        dest[j] |= exchange_bit(0, 1);
-                }
-        }
-        /* turn off CS */
-        exchange_bit(0,0);
-}
-/*
- * Copy and increment ethernet MAC address by a small value.
- *
- * This is useful for systems where the only one MAC address is stored in
- * non-volatile memory for multiple ports.
- */
-static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
-        unsigned int add)
-{
-        int i;
-        BUG_ON(add >= 256);
-        for (i = ETH_ALEN; i >= 0; i--) {
-                dst[i] = src[i] + add;
-                add = dst[i] < src[i];          /* compute carry */
-        }
-        WARN_ON(add);
-}
-static int __init mv643xx_eth_add_pds(void)
-{
-        unsigned char mac[ETH_ALEN];
-        int ret;
-        get_mac(mac);
-        eth_mac_add(eth0_pd.mac_addr, mac, 0);
-        eth_mac_add(eth1_pd.mac_addr, mac, 1);
-        ret = platform_add_devices(mv643xx_eth_pd_devs,
-                        ARRAY_SIZE(mv643xx_eth_pd_devs));
-        return ret;
-}
-device_initcall(mv643xx_eth_add_pds);
-#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
deleted file mode 100644
index b689ceea8cfb..000000000000
--- a/arch/mips/momentum/ocelot_c/prom.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/mv643xx.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-#include "ocelot_c_fpga.h"
-struct callvectors* debug_vectors;
-extern unsigned long marvell_base;
-extern unsigned int cpu_clock;
-const char *get_system_type(void)
-{
-#ifdef CONFIG_CPU_SR71000
-        return "Momentum Ocelot-CS";
-#else
-        return "Momentum Ocelot-C";
-#endif
-}
-#ifdef CONFIG_64BIT
-unsigned long signext(unsigned long addr)
-{
-  addr &= 0xffffffff;
-  return (unsigned long)((int)addr);
-}
-void *get_arg(unsigned long args, int arc)
-{
-  unsigned long ul;
-  unsigned char *puc, uc;
-  args += (arc * 4);
-  ul = (unsigned long)signext(args);
-  puc = (unsigned char *)ul;
-  if (puc == 0)
-    return (void *)0;
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-  uc = *puc++;
-  ul = (unsigned long)uc;
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 8);
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 16);
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 24);
-#else  /* CONFIG_CPU_LITTLE_ENDIAN */
-  uc = *puc++;
-  ul = ((unsigned long)uc) << 24;
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 16);
-  uc = *puc++;
-  ul |= (((unsigned long)uc) << 8);
-  uc = *puc++;
-  ul |= ((unsigned long)uc);
-#endif  /* CONFIG_CPU_LITTLE_ENDIAN */
-  ul = signext(ul);
-  return (void *)ul;
-}
-char *arg64(unsigned long addrin, int arg_index)
-{
-  unsigned long args;
-  char *p;
-  args = signext(addrin);
-  p = (char *)get_arg(args, arg_index);
-  return p;
-}
-#endif  /* CONFIG_64BIT */
-void __init prom_init(void)
-{
-        int argc = fw_arg0;
-        char **arg = (char **) fw_arg1;
-        char **env = (char **) fw_arg2;
-        struct callvectors *cv = (struct callvectors *) fw_arg3;
-        int i;
-#ifdef CONFIG_64BIT
-        char *ptr;
-        printk("prom_init - MIPS64\n");
-        /* save the PROM vectors for debugging use */
-        debug_vectors = (struct callvectors *)signext((unsigned long)cv);
-        /* arg[0] is "g", the rest is boot parameters */
-        arcs_cmdline[0] = '\0';
-        for (i = 1; i < argc; i++) {
-                ptr = (char *)arg64((unsigned long)arg, i);
-                if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
-                    sizeof(arcs_cmdline))
-                        break;
-                strcat(arcs_cmdline, ptr);
-                strcat(arcs_cmdline, " ");
-        }
-        i = 0;
-        while (1) {
-                ptr = (char *)arg64((unsigned long)env, i);
-                if (! ptr)
-                        break;
-                if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
-                        marvell_base = simple_strtol(ptr + strlen("gtbase="),
-                                                        NULL, 16);
-                        if ((marvell_base & 0xffffffff00000000) == 0)
-                                marvell_base |= 0xffffffff00000000;
-                        printk("marvell_base set to 0x%016lx\n", marvell_base);
-                }
-                if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
-                        cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
-                                                        NULL, 10);
-                        printk("cpu_clock set to %d\n", cpu_clock);
-                }
-                i++;
-        }
-        printk("arcs_cmdline: %s\n", arcs_cmdline);
-#else   /* CONFIG_64BIT */
-        /* save the PROM vectors for debugging use */
-        debug_vectors = cv;
-        /* arg[0] is "g", the rest is boot parameters */
-        arcs_cmdline[0] = '\0';
-        for (i = 1; i < argc; i++) {
-                if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-                    >= sizeof(arcs_cmdline))
-                        break;
-                strcat(arcs_cmdline, arg[i]);
-                strcat(arcs_cmdline, " ");
-        }
-        while (*env) {
-                if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-                        marvell_base = simple_strtol(*env + strlen("gtbase="),
-                                                        NULL, 16);
-                }
-                if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
-                        cpu_clock = simple_strtol(*env + strlen("cpuclock="),
-                                                        NULL, 10);
-                }
-                env++;
-        }
-#endif /* CONFIG_64BIT */
-        mips_machgroup = MACH_GROUP_MOMENCO;
-        mips_machtype = MACH_MOMENCO_OCELOT_C;
-#ifndef CONFIG_64BIT
-        debug_vectors->printf("Booting Linux kernel...\n");
-#endif
-}
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c
deleted file mode 100644
index 3fdcb64ff1e6..000000000000
--- a/arch/mips/momentum/ocelot_c/reset.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com  [MIPS64 modifications]
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-void momenco_ocelot_restart(char *command)
-{
-        /* base address of timekeeper portion of part */
-        void *nvram = (void *)
-#ifdef CONFIG_64BIT
-                0xfffffffffc807000;
-#else
-                0xfc807000;
-#endif
-        /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
-        writeb(0x84, nvram + 0xff7);
-        /* wait for the watchdog to go off */
-        mdelay(100+(1000/16));
-        /* if the watchdog fails for some reason, let people know */
-        printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-void momenco_ocelot_halt(void)
-{
-        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-        while (1)
-                __asm__(".set\tmips3\n\t"
-                        "wait\n\t"
-                        ".set\tmips0");
-}
-void momenco_ocelot_power_off(void)
-{
-        momenco_ocelot_halt();
-}
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
deleted file mode 100644
index 0b6b2338cfb4..000000000000
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Ocelot-C and -CS board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 2001  Ralf Baechle
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: Matthew Dharm, Momentum Computer
- *   mdharm@momenco.com
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/timex.h>
-#include <linux/vmalloc.h>
-#include <linux/mv643xx.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/marvell.h>
-#include <linux/bootmem.h>
-#include <linux/blkdev.h>
-#include "ocelot_c_fpga.h"
-unsigned long marvell_base;
-unsigned int cpu_clock;
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_ocelot_restart(char *command);
-extern void momenco_ocelot_halt(void);
-extern void momenco_ocelot_power_off(void);
-void momenco_time_init(void);
-static char reset_reason;
-void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask);
-static unsigned long ENTRYLO(unsigned long paddr)
-{
-        return ((paddr & PAGE_MASK) |
-               (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
-                _CACHE_UNCACHED)) >> 6;
-}
-/* setup code for a handoff from a version 2 PMON 2000 PROM */
-void PMON_v2_setup(void)
-{
-        /* Some wired TLB entries for the MV64340 and perhiperals. The
-           MV64340 is going to be hit on every IRQ anyway - there's
-           absolutely no point in letting it be a random TLB entry, as
-           it'll just cause needless churning of the TLB. And we use
-           the other half for the serial port, which is just a PITA
-           otherwise :)
-                Device                  Physical        Virtual
-                MV64340 Internal Regs   0xf4000000      0xf4000000
-                Ocelot-C[S] PLD (CS0)   0xfc000000      0xfc000000
-                NVRAM (CS1)             0xfc800000      0xfc800000
-                UARTs (CS2)             0xfd000000      0xfd000000
-                Internal SRAM           0xfe000000      0xfe000000
-                M-Systems DOC (CS3)     0xff000000      0xff000000
-        */
-  printk("PMON_v2_setup\n");
-#ifdef CONFIG_64BIT
-        /* marvell and extra space */
-        add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K);
-        /* fpga, rtc, and uart */
-        add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfffffffffc000000, PM_16M);
-        /* m-sys and internal SRAM */
-        add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
-        marvell_base = 0xfffffffff4000000;
-#else
-        /* marvell and extra space */
-        add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K);
-        /* fpga, rtc, and uart */
-        add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfc000000, PM_16M);
-        /* m-sys and internal SRAM */
-        add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
-        marvell_base = 0xf4000000;
-#endif
-}
-unsigned long m48t37y_get_time(void)
-{
-#ifdef CONFIG_64BIT
-        unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000;
-#else
-        unsigned char* rtc_base = (unsigned char*)0xfc800000;
-#endif
-        unsigned int year, month, day, hour, min, sec;
-        unsigned long flags;
-        spin_lock_irqsave(&rtc_lock, flags);
-        /* stop the update */
-        rtc_base[0x7ff8] = 0x40;
-        year = BCD2BIN(rtc_base[0x7fff]);
-        year += BCD2BIN(rtc_base[0x7ff1]) * 100;
-        month = BCD2BIN(rtc_base[0x7ffe]);
-        day = BCD2BIN(rtc_base[0x7ffd]);
-        hour = BCD2BIN(rtc_base[0x7ffb]);
-        min = BCD2BIN(rtc_base[0x7ffa]);
-        sec = BCD2BIN(rtc_base[0x7ff9]);
-        /* start the update */
-        rtc_base[0x7ff8] = 0x00;
-        spin_unlock_irqrestore(&rtc_lock, flags);
-        return mktime(year, month, day, hour, min, sec);
-}
-int m48t37y_set_time(unsigned long sec)
-{
-#ifdef CONFIG_64BIT
-        unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000;
-#else
-        unsigned char* rtc_base = (unsigned char*)0xfc800000;
-#endif
-        struct rtc_time tm;
-        unsigned long flags;
-        /* convert to a more useful format -- note months count from 0 */
-        to_tm(sec, &tm);
-        tm.tm_mon += 1;
-        spin_lock_irqsave(&rtc_lock, flags);
-        /* enable writing */
-        rtc_base[0x7ff8] = 0x80;
-        /* year */
-        rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
-        rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
-        /* month */
-        rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
-        /* day */
-        rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
-        /* hour/min/sec */
-        rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
-        rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
-        rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
-        /* day of week -- not really used, but let's keep it up-to-date */
-        rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
-        /* disable writing */
-        rtc_base[0x7ff8] = 0x00;
-        spin_unlock_irqrestore(&rtc_lock, flags);
-        return 0;
-}
-void __init plat_timer_setup(struct irqaction *irq)
-{
-        setup_irq(7, irq);
-}
-void momenco_time_init(void)
-{
-#ifdef CONFIG_CPU_SR71000
-        mips_hpt_frequency = cpu_clock;
-#elif defined(CONFIG_CPU_RM7000)
-        mips_hpt_frequency = cpu_clock / 2;
-#else
-#error Unknown CPU for this board
-#endif
-        printk("momenco_time_init cpu_clock=%d\n", cpu_clock);
-        rtc_mips_get_time = m48t37y_get_time;
-        rtc_mips_set_time = m48t37y_set_time;
-}
-void __init plat_mem_setup(void)
-{
-        unsigned int tmpword;
-        board_time_init = momenco_time_init;
-        _machine_restart = momenco_ocelot_restart;
-        _machine_halt = momenco_ocelot_halt;
-        pm_power_off = momenco_ocelot_power_off;
-        /*
-         * initrd_start = (unsigned long)ocelot_initrd_start;
-         * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
-         * initrd_below_start_ok = 1;
-         */
-        /* do handoff reconfiguration */
-        PMON_v2_setup();
-        /* shut down ethernet ports, just to be sure our memory doesn't get
-         * corrupted by random ethernet traffic.
-         */
-        MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-        MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-        MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-        MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
-        do {}
-          while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
-        do {}
-          while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
-        do {}
-          while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
-        do {}
-          while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-        MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
-                 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-        MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
-                 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
-        /* Turn off the Bit-Error LED */
-        OCELOT_FPGA_WRITE(0x80, CLR);
-        tmpword = OCELOT_FPGA_READ(BOARDREV);
-#ifdef CONFIG_CPU_SR71000
-        if (tmpword < 26)
-                printk("Momenco Ocelot-CS: Board Assembly Rev. %c\n",
-                        'A'+tmpword);
-        else
-                printk("Momenco Ocelot-CS: Board Assembly Revision #0x%x\n",
-                        tmpword);
-#else
-        if (tmpword < 26)
-                printk("Momenco Ocelot-C: Board Assembly Rev. %c\n",
-                        'A'+tmpword);
-        else
-                printk("Momenco Ocelot-C: Board Assembly Revision #0x%x\n",
-                        tmpword);
-#endif
-        tmpword = OCELOT_FPGA_READ(FPGA_REV);
-        printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
-        tmpword = OCELOT_FPGA_READ(RESET_STATUS);
-        printk("Reset reason: 0x%x\n", tmpword);
-        switch (tmpword) {
-                case 0x1:
-                        printk("  - Power-up reset\n");
-                        break;
-                case 0x2:
-                        printk("  - Push-button reset\n");
-                        break;
-                case 0x4:
-                        printk("  - cPCI bus reset\n");
-                        break;
-                case 0x8:
-                        printk("  - Watchdog reset\n");
-                        break;
-                case 0x10:
-                        printk("  - Software reset\n");
-                        break;
-                default:
-                        printk("  - Unknown reset cause\n");
-        }
-        reset_reason = tmpword;
-        OCELOT_FPGA_WRITE(0xff, RESET_STATUS);
-        tmpword = OCELOT_FPGA_READ(CPCI_ID);
-        printk("cPCI ID register: 0x%02x\n", tmpword);
-        printk("  - Slot number: %d\n", tmpword & 0x1f);
-        printk("  - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no");
-        printk("  - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no");
-        tmpword = OCELOT_FPGA_READ(BOARD_STATUS);
-        printk("Board Status register: 0x%02x\n", tmpword);
-        printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
-        printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
-        printk("  - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
-        printk("  - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
-        switch(tmpword &3) {
-        case 3:
-                /* 512MiB */
-                add_memory_region(0x0, 0x200<<20, BOOT_MEM_RAM);
-                break;
-        case 2:
-                /* 256MiB */
-                add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
-                break;
-        case 1:
-                /* 128MiB */
-                add_memory_region(0x0,  0x80<<20, BOOT_MEM_RAM);
-                break;
-        case 0:
-                /* 1GiB -- needs CONFIG_HIGHMEM */
-                add_memory_region(0x0, 0x400<<20, BOOT_MEM_RAM);
-                break;
-        }
-}
-/*
- * This needs to be one of the first initcalls, because no I/O port access
- * can work before this
- */
-static int io_base_ioremap(void)
-{
-        void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000);
-        if (!io_remap_range)
-                panic("Could not ioremap I/O port range");
-        set_io_port_base((unsigned long) io_remap_range);
-        return 0;
-}
-module_init(io_base_ioremap);
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
deleted file mode 100644
index de1a31ee52f3..000000000000
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- *
- * arch/mips/momentum/ocelot_c/uart-irq.c
- *     Interrupt routines for UARTs.  Interrupt numbers are assigned from
- *     80 to 81 (2 interrupt sources).
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include "ocelot_c_fpga.h"
-static inline int ls1bit8(unsigned int x)
-{
-        int b = 7, s;
-        s =  4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s;
-        s =  2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s;
-        s =  1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s;
-        return b;
-}
-/* mask off an interrupt -- 0 is enable, 1 is disable */
-static inline void mask_uart_irq(unsigned int irq)
-{
-        uint8_t value;
-        value = OCELOT_FPGA_READ(UART_INTMASK);
-        value |= 1 << (irq - 74);
-        OCELOT_FPGA_WRITE(value, UART_INTMASK);
-        /* read the value back to assure that it's really been written */
-        value = OCELOT_FPGA_READ(UART_INTMASK);
-}
-/* unmask an interrupt -- 0 is enable, 1 is disable */
-static inline void unmask_uart_irq(unsigned int irq)
-{
-        uint8_t value;
-        value = OCELOT_FPGA_READ(UART_INTMASK);
-        value &= ~(1 << (irq - 74));
-        OCELOT_FPGA_WRITE(value, UART_INTMASK);
-        /* read the value back to assure that it's really been written */
-        value = OCELOT_FPGA_READ(UART_INTMASK);
-}
-/*
- * Interrupt handler for interrupts coming from the FPGA chip.
- */
-void ll_uart_irq(void)
-{
-        unsigned int irq_src, irq_mask;
-        /* read the interrupt status registers */
-        irq_src = OCELOT_FPGA_READ(UART_INTSTAT);
-        irq_mask = OCELOT_FPGA_READ(UART_INTMASK);
-        /* mask for just the interrupts we want */
-        irq_src &= ~irq_mask;
-        do_IRQ(ls1bit8(irq_src) + 74);
-}
-struct irq_chip uart_irq_type = {
-        .name = "UART/FPGA",
-        .ack = mask_uart_irq,
-        .mask = mask_uart_irq,
-        .mask_ack = mask_uart_irq,
-        .unmask = unmask_uart_irq,
-};
-void uart_irq_init(void)
-{
-        set_irq_chip_and_handler(80, &uart_irq_type, handle_level_irq);
-        set_irq_chip_and_handler(81, &uart_irq_type, handle_level_irq);
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 3ff56b84add0..a3e741e190f2 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)        += fixup-malta.o
 obj-$(CONFIG_MOMENCO_OCELOT)    += fixup-ocelot.o pci-ocelot.o
 obj-$(CONFIG_MOMENCO_OCELOT_3)  += fixup-ocelot3.o
-obj-$(CONFIG_MOMENCO_OCELOT_C)  += fixup-ocelot-c.o pci-ocelot-c.o
 obj-$(CONFIG_PMC_YOSEMITE)      += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
                                   pci-yosemite.o
 obj-$(CONFIG_SGI_IP27)          += ops-bridge.o pci-ip27.o
diff --git a/arch/mips/pci/fixup-ocelot-c.c b/arch/mips/pci/fixup-ocelot-c.c
deleted file mode 100644
index 6616648712c2..000000000000
--- a/arch/mips/pci/fixup-ocelot-c.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Based on work for the Linux port to the Ocelot board, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/momentum/ocelot_g/pci.c
- *     Board-specific PCI routines for mv64340 controller.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-        int bus = dev->bus->number;
-        if (bus == 0 && slot == 1)
-                return 2;       /* PCI-X A */
-        if (bus == 1 && slot == 1)
-                return 12;      /* PCI-X B */
-        if (bus == 1 && slot == 2)
-                return 4;       /* PCI B */
-return 0;
-        panic("Whooops in pcibios_map_irq");
-}
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-        return 0;
-}
diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c
deleted file mode 100644
index 027759f7c904..000000000000
--- a/arch/mips/pci/pci-ocelot-c.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/mv643xx.h>
-#include <linux/init.h>
-#include <asm/marvell.h>
-/*
- * We assume the address ranges have already been setup appropriately by
- * the firmware.  PMON in case of the Ocelot C does that.
- */
-static struct resource mv_pci_io_mem0_resource = {
-        .name   = "MV64340 PCI0 IO MEM",
-        .flags  = IORESOURCE_IO
-};
-static struct resource mv_pci_mem0_resource = {
-        .name   = "MV64340 PCI0 MEM",
-        .flags  = IORESOURCE_MEM
-};
-static struct mv_pci_controller mv_bus0_controller = {
-        .pcic = {
-                .pci_ops        = &mv_pci_ops,
-                .mem_resource   = &mv_pci_mem0_resource,
-                .io_resource    = &mv_pci_io_mem0_resource,
-        },
-        .config_addr    = MV64340_PCI_0_CONFIG_ADDR,
-        .config_vreg    = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
-};
-static uint32_t mv_io_base, mv_io_size;
-static void mv64340_pci0_init(void)
-{
-        uint32_t mem0_base, mem0_size;
-        uint32_t io_base, io_size;
-        io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
-        io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
-        mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
-        mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
-        mv_pci_io_mem0_resource.start           = 0;
-        mv_pci_io_mem0_resource.end             = io_size - 1;
-        mv_pci_mem0_resource.start              = mem0_base;
-        mv_pci_mem0_resource.end                = mem0_base + mem0_size - 1;
-        mv_bus0_controller.pcic.mem_offset      = mem0_base;
-        mv_bus0_controller.pcic.io_offset       = 0;
-        ioport_resource.end             = io_size - 1;
-        register_pci_controller(&mv_bus0_controller.pcic);
-        mv_io_base = io_base;
-        mv_io_size = io_size;
-}
-static struct resource mv_pci_io_mem1_resource = {
-        .name   = "MV64340 PCI1 IO MEM",
-        .flags  = IORESOURCE_IO
-};
-static struct resource mv_pci_mem1_resource = {
-        .name   = "MV64340 PCI1 MEM",
-        .flags  = IORESOURCE_MEM
-};
-static struct mv_pci_controller mv_bus1_controller = {
-        .pcic = {
-                .pci_ops        = &mv_pci_ops,
-                .mem_resource   = &mv_pci_mem1_resource,
-                .io_resource    = &mv_pci_io_mem1_resource,
-        },
-        .config_addr    = MV64340_PCI_1_CONFIG_ADDR,
-        .config_vreg    = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
-};
-static __init void mv64340_pci1_init(void)
-{
-        uint32_t mem0_base, mem0_size;
-        uint32_t io_base, io_size;
-        io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
-        io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
-        mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
-        mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
-        /*
-         * Here we assume the I/O window of second bus to be contiguous with
-         * the first.  A gap is no problem but would waste address space for
-         * remapping the port space.
-         */
-        mv_pci_io_mem1_resource.start           = mv_io_size;
-        mv_pci_io_mem1_resource.end             = mv_io_size + io_size - 1;
-        mv_pci_mem1_resource.start              = mem0_base;
-        mv_pci_mem1_resource.end                = mem0_base + mem0_size - 1;
-        mv_bus1_controller.pcic.mem_offset      = mem0_base;
-        mv_bus1_controller.pcic.io_offset       = 0;
-        ioport_resource.end             = io_base + io_size -mv_io_base - 1;
-        register_pci_controller(&mv_bus1_controller.pcic);
-        mv_io_size = io_base + io_size - mv_io_base;
-}
-static __init int __init ocelot_c_pci_init(void)
-{
-        unsigned long io_v_base;
-        uint32_t enable;
-        enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
-        /*
-         * We require at least one enabled I/O or PCI memory window or we
-         * will ignore this PCI bus.  We ignore PCI windows 1, 2 and 3.
-         */
-        if (enable & (0x01 <<  9) || enable & (0x01 << 10))
-                mv64340_pci0_init();
-        if (enable & (0x01 << 14) || enable & (0x01 << 15))
-                mv64340_pci1_init();
-        if (mv_io_size) {
-                io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
-                if (!io_v_base)
-                        panic("Could not ioremap I/O port range");
-                set_io_port_base(io_v_base);
-        }
-        return 0;
-}
-arch_initcall(ocelot_c_pci_init);