34 files changed, 40 insertions, 40 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e238ad8cfd8f..018d637f87fc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -107,7 +107,7 @@ config ARCH_AT91SAM9260_SAM9XE
         depends on ARCH_AT91SAM9260
         help
           Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
-          They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+          They are basically AT91SAM9260s with various sizes of embedded Flash.
 
 comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 8781aaeb576b..c7e229b00f6e 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -84,7 +84,7 @@ config MACH_OMAP_PALMTE
           Support for the Palm Tungsten E PDA. Currently only the LCD panel
           is supported. To boot the kernel, you'll need a PalmOS compatible
           bootloader; check out http://palmtelinux.sourceforge.net for more
-          informations.
+          information.
           Say Y here if you have such a PDA, say NO otherwise.
 
 config MACH_NOKIA770
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 637aaba65390..d1eeed2ad47c 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
+/* linux/arch/arm/mach-s3c2410/sleep.S
  *
  * Copyright (c) 2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 435349dc3243..7b7ae790b00d 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/plat-s3c24xx/sleep.S
  *
  * Copyright (c) 2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index f64624fc4504..1d859c16931e 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -603,7 +603,7 @@ config ETRAX_CARDBUS
         select HOTPLUG
         select PCCARD_NONSTATIC
         help
-         Enabled the ETRAX Carbus driver.
+         Enabled the ETRAX Cardbus driver.
 
 config PCI
        bool
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
index e0e9bcb015a9..554efe604a08 100644
--- a/arch/h8300/Kconfig.debug
+++ b/arch/h8300/Kconfig.debug
@@ -21,12 +21,12 @@ config GDB_MAGICPRINT
         bool "Message Output for GDB MagicPrint service"
         depends on (H8300H_SIM || H8S_SIM)
         help
-          kernel messages output useing MagicPrint service from GDB
+          kernel messages output using MagicPrint service from GDB
 
 config SYSCALL_PRINT
         bool "SystemCall trace print"
         help
-          outout history of systemcall
+          output history of systemcall
 
 config GDB_DEBUG
         bool "Use gdb stub"
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 64ad10f984a1..30944ee2e61a 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -858,9 +858,9 @@ config RELOCATABLE
         bool "Build a relocatable kernel(EXPERIMENTAL)"
         depends on EXPERIMENTAL
         help
-          This build a kernel image that retains relocation information
+          This builds a kernel image that retains relocation information
           so it can be loaded someplace besides the default 1MB.
-          The relocations tend to the kernel binary about 10% larger,
+          The relocations tend to make the kernel binary about 10% larger,
           but are discarded at runtime.
 
           One use is for the kexec on panic case where the recovery kernel
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
index dce6124cb842..d7f6fb0b30f2 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/i386/Kconfig.cpu
@@ -108,7 +108,7 @@ config MCORE2
         bool "Core 2/newer Xeon"
         help
           Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-          CPUs. You can distingush newer from older Xeons by the CPU family
+          CPUs. You can distinguish newer from older Xeons by the CPU family
           in /proc/cpuinfo. Newer ones have 6.
 
 config MPENTIUM4
@@ -172,7 +172,7 @@ config MWINCHIP3D
         help
           Select this for an IDT Winchip-2A or 3.  Linux and GCC
           treat this chip as a 586TSC with some extended instructions
-          and alignment reqirements.  Also enable out of order memory
+          and alignment requirements.  Also enable out of order memory
           stores for this CPU, which can increase performance of some
           operations.
 
diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c
index 5b0a040213c2..7ba7c3abd3a4 100644
--- a/arch/i386/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c
+ * linux/arch/i386/kernel/cpu/mcheck/therm_throt.c
  *
  * Thermal throttle event support code (such as syslog messaging and rate
  * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index e23af4b6ae8c..6e41471449c0 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -468,7 +468,7 @@ config KEXEC
         help
           kexec is a system call that implements the ability to shutdown your
           current kernel, and to start another kernel.  It is like a reboot
-          but it is indepedent of the system firmware.   And like a reboot
+          but it is independent of the system firmware.   And like a reboot
           you can start any kernel with it, not just Linux.
 
           The name comes from the similiarity to the exec system call.
diff --git a/arch/m68knommu/Kconfig.debug b/arch/m68knommu/Kconfig.debug
index 763c9aa0b4fd..9ff47bd09aee 100644
--- a/arch/m68knommu/Kconfig.debug
+++ b/arch/m68knommu/Kconfig.debug
@@ -5,7 +5,7 @@ source "lib/Kconfig.debug"
 config FULLDEBUG
         bool "Full Symbolic/Source Debugging support"
         help
-          Enable debuging symbols on kernel build.
+          Enable debugging symbols on kernel build.
 
 config HIGHPROFILE
         bool "Use fast second timer for profiling"
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b7cb048bc771..16ecea3c0813 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -956,7 +956,7 @@ choice
           byte order. These modes require different kernels and a different
           Linux distribution.  In general there is one preferred byteorder for a
           particular system but some systems are just as commonly used in the
-          one or the other endianess.
+          one or the other endianness.
 
 config CPU_BIG_ENDIAN
         bool "Big endian"
@@ -1750,7 +1750,7 @@ config ARCH_DISCONTIGMEM_ENABLE
         bool
         default y if SGI_IP27
         help
-          Say Y to upport efficient handling of discontiguous physical memory,
+          Say Y to support efficient handling of discontiguous physical memory,
           for architectures which are either NUMA (Non-Uniform Memory Access)
           or have huge holes in the physical address space for other reasons.
           See <file:Documentation/vm/numa> for more.
@@ -1938,7 +1938,7 @@ config KEXEC
         help
           kexec is a system call that implements the ability to shutdown your
           current kernel, and to start another kernel.  It is like a reboot
-          but it is indepedent of the system firmware.   And like a reboot
+          but it is independent of the system firmware.   And like a reboot
           you can start any kernel with it, not just Linux.
 
           The name comes from the similiarity to the exec system call.
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index f2f742df32c7..4892db88a86a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -92,7 +92,7 @@ cflags-y += -ffreestanding
 # when fed the toolchain default!
 #
 # Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of
-# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL
+# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
 # are used, so we kludge that here.  A bug has been filed at
 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
 #
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index 7a7444874e80..0ad39e53f7b1 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -14,7 +14,7 @@
 #include <linux/pci.h>
 
 /*
- * Set the the BCM1250, etc. PCI host bridge's TRDY timeout
+ * Set the BCM1250, etc. PCI host bridge's TRDY timeout
  * to the finite max.
  */
 static void __init quirk_sb1250_pci(struct pci_dev *dev)
@@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
                         quirk_sb1250_ht);
 
 /*
- * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
+ * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
  */
 static void __init quirk_sp1011(struct pci_dev *dev)
 {
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index f70e795c262e..346cd3befe1e 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -32,7 +32,7 @@ config HCALL_STATS
         depends on PPC_PSERIES && DEBUG_FS
         help
           Adds code to keep track of the number of hypervisor calls made and
-          the amount of time spent in hypervisor callsr.  Wall time spent in
+          the amount of time spent in hypervisor calls.  Wall time spent in
           each call is always calculated, and if available CPU cycles spent
           are also calculated.  A directory named hcall_inst is added at the
           root of the debugfs filesystem.  Within the hcall_inst directory
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 626b29f38304..c29293befba9 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -747,7 +747,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
                  * counter value etc.) are not copied to the actual registers
                  * until the performance monitor is enabled.  In order to get
                  * this to work as desired, the permormance monitor needs to
-                 * be disabled while writting to the latches.  This is a
+                 * be disabled while writing to the latches.  This is a
                  * HW design issue.
                  */
                 cbe_enable_pm(cpu);
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index a35315af5c53..cf0e7bc8c2e7 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc86xads-setup.c
+/*arch/powerpc/platforms/8xx/mpc86xads_setup.c
  *
  * Platform setup for the Freescale mpc86xads board
  *
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index a57b57785acd..c36e475d93dc 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc885ads-setup.c
+/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
  *
  * Platform setup for the Freescale mpc885ads board
  *
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index d68d920eb2c4..7fb92f23f380 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -74,7 +74,7 @@ static void spider_io_flush(const volatile void __iomem *addr)
         /* Fast path if we have a non-0 token, it indicates which bus we
          * are on.
          *
-         * If the token is 0, that means either the the ioremap was done
+         * If the token is 0, that means either that the ioremap was done
          * before we initialized this layer, or it's a PIO operation. We
          * fallback to a low path in this case. Hopefully, internal devices
          * which are ioremap'ed early should use in_XX/out_XX functions
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
index 7ce5364fdb3b..bf72204125c5 100644
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc866ads-setup.c
+/*arch/ppc/platforms/mpc866ads_setup.c
  *
  * Platform setup for the Freescale mpc866ads board
  *
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
index 10659c24b1be..9192777d0f78 100644
--- a/arch/ppc/syslib/ipic.c
+++ b/arch/ppc/syslib/ipic.c
@@ -1,5 +1,5 @@
 /*
- * include/asm-ppc/ipic.c
+ * arch/ppc/syslib/ipic.c
  *
  * IPIC routines implementations.
  *
diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig
index 99ff9f08e4d7..d1defbbfcd81 100644
--- a/arch/s390/crypto/Kconfig
+++ b/arch/s390/crypto/Kconfig
@@ -54,7 +54,7 @@ config S390_PRNG
         default "m"
         help
           Select this option if you want to use the s390 pseudo random number
-          generator. The PRNG is part of the cryptograhic processor functions
+          generator. The PRNG is part of the cryptographic processor functions
           and uses triple-DES to generate secure random numbers like the
           ANSI X9.17 standard. The PRNG is usable via the char device
           /dev/prandom.
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 770defed9c4a..52c7bfa57c2c 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/sh/kernel/setup_7751se.c
+ * linux/arch/sh/boards/se/7751/setup.c
  *
  * Copyright (C) 2000  Kazumoto Kojima
  *
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index f3e827f29a46..832c0b4a1e6c 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/entry.S
+ * arch/sh/kernel/cpu/sh3/entry.S
  *
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  *  Copyright (C) 2003 - 2006  Paul Mundt
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh73180.c b/arch/sh/kernel/cpu/sh4a/clock-sh73180.c
index 2fa5cb2ae68d..6d5ba373a75e 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh73180.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh73180.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4/clock-sh73180.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh73180.c
  *
  * SH73180 support for the clock framework
  *
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 1707a213f0cf..7adc4f16e95a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4/clock-sh7343.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
  *
  * SH7343/SH7722 support for the clock framework
  *
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
index c8694bac6477..8e236062c721 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4/clock-sh7770.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh7770.c
  *
  * SH7770 support for the clock framework
  *
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index 9e6a216750c8..01f3da619d3d 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4/clock-sh7780.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh7780.c
  *
  * SH7780 support for the clock framework
  *
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
index 7b0f66f03319..e146bafcd14f 100644
--- a/arch/sh/kernel/vsyscall/vsyscall.c
+++ b/arch/sh/kernel/vsyscall/vsyscall.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/vsyscall.c
+ * arch/sh/kernel/vsyscall/vsyscall.c
  *
  *  Copyright (C) 2006 Paul Mundt
  *
diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/include/sysdep-i386/archsetjmp.h
index 11bafab669e9..0f312085ce1d 100644
--- a/arch/um/include/sysdep-i386/archsetjmp.h
+++ b/arch/um/include/sysdep-i386/archsetjmp.h
@@ -1,5 +1,5 @@
 /*
- * arch/i386/include/klibc/archsetjmp.h
+ * arch/um/include/sysdep-i386/archsetjmp.h
  */
 
 #ifndef _KLIBC_ARCHSETJMP_H
diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/include/sysdep-x86_64/archsetjmp.h
index 9a5e1a6ec800..2af8f12ca161 100644
--- a/arch/um/include/sysdep-x86_64/archsetjmp.h
+++ b/arch/um/include/sysdep-x86_64/archsetjmp.h
@@ -1,5 +1,5 @@
 /*
- * arch/x86_64/include/klibc/archsetjmp.h
+ * arch/um/include/sysdep-x86_64/archsetjmp.h
  */
 
 #ifndef _KLIBC_ARCHSETJMP_H
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
index 8bc521ca081f..e4327a8d6bcd 100644
--- a/arch/v850/kernel/entry.S
+++ b/arch/v850/kernel/entry.S
@@ -523,7 +523,7 @@ END(ret_from_trap)
 
 
 /* This the initial entry point for a new child thread, with an appropriate
-   stack in place that makes it look the the child is in the middle of an
+   stack in place that makes it look that the child is in the middle of an
    syscall.  This function is actually `returned to' from switch_thread
    (copy_thread makes ret_from_fork the return address in each new thread's
    saved context).  */
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 4d582589fa89..d8bfe315471c 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1413,7 +1413,7 @@ static void ack_apic_level(unsigned int irq)
 
         /*
          * We must acknowledge the irq before we move it or the acknowledge will
-         * not propogate properly.
+         * not propagate properly.
          */
         ack_APIC_irq();
 
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index ca76f071666e..f5319d78c876 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -1,5 +1,5 @@
 /*
- * arch/xtensa/pci-dma.c
+ * arch/xtensa/kernel/pci-dma.c
  *
  * DMA coherent memory allocation.
  *