10 files changed, 32 insertions, 37 deletions

diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index f8e6cc4fecd4..2a6c893ccf60 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -285,7 +285,7 @@ void __init init_bsp_APIC(void)
         apic_write_around(APIC_LVT1, value);
 }
 
-void __init setup_local_APIC (void)
+void __cpuinit setup_local_APIC (void)
 {
         unsigned int value, ver, maxlvt;
 
@@ -534,7 +534,7 @@ static struct sys_device device_lapic = {
         .cls            = &lapic_sysclass,
 };
 
-static void __init apic_pm_activate(void)
+static void __cpuinit apic_pm_activate(void)
 {
         apic_pm_state.active = 1;
 }
@@ -774,14 +774,14 @@ void __init setup_boot_APIC_clock (void)
         local_irq_enable();
 }
 
-void __init setup_secondary_APIC_clock(void)
+void __cpuinit setup_secondary_APIC_clock(void)
 {
         local_irq_disable(); /* FIXME: Do we need this? --RR */
         setup_APIC_timer(calibration_result);
         local_irq_enable();
 }
 
-void __init disable_APIC_timer(void)
+void __cpuinit disable_APIC_timer(void)
 {
         if (using_apic_timer) {
                 unsigned long v;
diff --git a/arch/x86_64/kernel/i387.c b/arch/x86_64/kernel/i387.c
index ba139cac57ce..d9b22b633e39 100644
--- a/arch/x86_64/kernel/i387.c
+++ b/arch/x86_64/kernel/i387.c
@@ -42,7 +42,7 @@ void mxcsr_feature_mask_init(void)
  * Called at bootup to set up the initial FPU state that is later cloned
  * into all processes.
  */
-void __init fpu_init(void)
+void __cpuinit fpu_init(void)
 {
         unsigned long oldcr0 = read_cr0();
         extern void __bad_fxsave_alignment(void);
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 3a89d735a4f6..7ab15c8ab95f 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -327,7 +327,7 @@ static void mce_init(void *dummy)
 }
 
 /* Add per CPU specific workarounds here */
-static void __init mce_cpu_quirks(struct cpuinfo_x86 *c) 
+static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
 { 
         /* This should be disabled by the BIOS, but isn't always */
         if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) {
@@ -337,7 +337,7 @@ static void __init mce_cpu_quirks(struct cpuinfo_x86 *c)
         }
 }                       
 
-static void __init mce_cpu_features(struct cpuinfo_x86 *c)
+static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
 {
         switch (c->x86_vendor) {
         case X86_VENDOR_INTEL:
@@ -352,7 +352,7 @@ static void __init mce_cpu_features(struct cpuinfo_x86 *c)
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off. 
  */
-void __init mcheck_init(struct cpuinfo_x86 *c)
+void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
 {
         static cpumask_t mce_cpus __initdata = CPU_MASK_NONE;
 
@@ -542,7 +542,7 @@ ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(tolerant,tolerant,)
 ACCESSOR(check_interval,check_interval,mce_restart())
 
-static __init int mce_init_device(void)
+static __cpuinit int mce_init_device(void)
 {
         int err;
         if (!mce_available(&boot_cpu_data))
diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c
index 4db9a640069f..0be0a7959814 100644
--- a/arch/x86_64/kernel/mce_intel.c
+++ b/arch/x86_64/kernel/mce_intel.c
@@ -42,7 +42,7 @@ done:
         irq_exit();
 }
 
-static void __init intel_init_thermal(struct cpuinfo_x86 *c)
+static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
 {
         u32 l, h;
         int tm2 = 0;
@@ -93,7 +93,7 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c)
         return;
 }
 
-void __init mce_intel_feature_init(struct cpuinfo_x86 *c)
+void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c)
 {
         intel_init_thermal(c);
 }
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 31c0f2e6ac91..4e44d6e6b7e5 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -98,7 +98,7 @@ static unsigned int nmi_p4_cccr_val;
         (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|     \
          P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
 
-static __init inline int nmi_known_cpu(void)
+static __cpuinit inline int nmi_known_cpu(void)
 {
         switch (boot_cpu_data.x86_vendor) {
         case X86_VENDOR_AMD:
@@ -110,7 +110,7 @@ static __init inline int nmi_known_cpu(void)
 }
 
 /* Run after command line and cpu_init init, but before all other checks */
-void __init nmi_watchdog_default(void)
+void __cpuinit nmi_watchdog_default(void)
 {
         if (nmi_watchdog != NMI_DEFAULT)
                 return;
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index e59d1f9d6163..15fa35a81a72 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -204,7 +204,7 @@ static void mwait_idle(void)
         }
 }
 
-void __init select_idle_routine(const struct cpuinfo_x86 *c)
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 {
         static int printed;
         if (cpu_has(c, X86_FEATURE_MWAIT)) {
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 000015dd5a8b..ca9a915a6d4a 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -676,7 +676,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
-static int __init get_model_name(struct cpuinfo_x86 *c)
+static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
 {
         unsigned int *v;
 
@@ -692,7 +692,7 @@ static int __init get_model_name(struct cpuinfo_x86 *c)
 }
 
 
-static void __init display_cacheinfo(struct cpuinfo_x86 *c)
+static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 {
         unsigned int n, dummy, eax, ebx, ecx, edx;
 
@@ -803,7 +803,7 @@ static int __init init_amd(struct cpuinfo_x86 *c)
         return r;
 }
 
-static void __init detect_ht(struct cpuinfo_x86 *c)
+static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
         u32     eax, ebx, ecx, edx;
@@ -864,7 +864,7 @@ static void __init detect_ht(struct cpuinfo_x86 *c)
 /*
  * find out the number of processor cores on the die
  */
-static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c)
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 {
         unsigned int eax;
 
@@ -882,7 +882,7 @@ static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c)
                 return 1;
 }
 
-static void __init init_intel(struct cpuinfo_x86 *c)
+static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 {
         /* Cache sizes */
         unsigned n;
@@ -902,7 +902,7 @@ static void __init init_intel(struct cpuinfo_x86 *c)
         c->x86_num_cores = intel_num_cpu_cores(c);
 }
 
-void __init get_cpu_vendor(struct cpuinfo_x86 *c)
+void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 {
         char *v = c->x86_vendor_id;
 
@@ -923,7 +923,7 @@ struct cpu_model_info {
 /* Do some early cpuid on the boot CPU to get some parameter that are
    needed before check_bugs. Everything advanced is in identify_cpu
    below. */
-void __init early_identify_cpu(struct cpuinfo_x86 *c)
+void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 {
         u32 tfms;
 
@@ -977,7 +977,7 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c)
 /*
  * This does the hard work of actually picking apart the CPU stuff...
  */
-void __init identify_cpu(struct cpuinfo_x86 *c)
+void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 {
         int i;
         u32 xlvl;
@@ -1054,7 +1054,7 @@ void __init identify_cpu(struct cpuinfo_x86 *c)
 }
  
 
-void __init print_cpu_info(struct cpuinfo_x86 *c)
+void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 {
         if (c->x86_model_id[0])
                 printk("%s", c->x86_model_id);
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index 678b7ac33b8b..f2b9c6bc999a 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -29,7 +29,7 @@
 
 char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,};
 
-cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
 
 struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; 
 
@@ -171,7 +171,7 @@ void syscall_init(void)
         wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); 
 }
 
-void __init check_efer(void)
+void __cpuinit check_efer(void)
 {
         unsigned long efer;
 
@@ -188,7 +188,7 @@ void __init check_efer(void)
  * 'CPU state barrier', nothing should get across.
  * A lot of state is already set up in PDA init.
  */
-void __init cpu_init (void)
+void __cpuinit cpu_init (void)
 {
 #ifdef CONFIG_SMP
         int cpu = stack_smp_processor_id();
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index f1ec0f345941..bc98a6722cba 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -58,11 +58,6 @@
 #include <asm/proto.h>
 #include <asm/nmi.h>
 
-/* Change for real CPU hotplug. Note other files need to be fixed
-   first too. */
-#define __cpuinit __init
-#define __cpuinitdata __initdata
-
 /* Number of siblings per CPU package */
 int smp_num_siblings = 1;
 /* Package ID of each logical CPU */
@@ -823,7 +818,7 @@ static __cpuinit void smp_cleanup_boot(void)
  *
  * RED-PEN audit/test this more. I bet there is more state messed up here.
  */
-static __cpuinit void disable_smp(void)
+static __init void disable_smp(void)
 {
         cpu_present_map = cpumask_of_cpu(0);
         cpu_possible_map = cpumask_of_cpu(0);
@@ -838,7 +833,7 @@ static __cpuinit void disable_smp(void)
 /*
  * Handle user cpus=... parameter.
  */
-static __cpuinit void enforce_max_cpus(unsigned max_cpus)
+static __init void enforce_max_cpus(unsigned max_cpus)
 {
         int i, k;
         k = 0;
@@ -855,7 +850,7 @@ static __cpuinit void enforce_max_cpus(unsigned max_cpus)
 /*
  * Various sanity checks.
  */
-static int __cpuinit smp_sanity_check(unsigned max_cpus)
+static int __init smp_sanity_check(unsigned max_cpus)
 {
         if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
                 printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
@@ -913,7 +908,7 @@ static int __cpuinit smp_sanity_check(unsigned max_cpus)
  * Prepare for SMP bootup.  The MP table or ACPI has been read
  * earlier.  Just do some sanity checking here and enable APIC mode.
  */
-void __cpuinit smp_prepare_cpus(unsigned int max_cpus)
+void __init smp_prepare_cpus(unsigned int max_cpus)
 {
         int i;
 
@@ -1019,7 +1014,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 /*
  * Finish the SMP boot.
  */
-void __cpuinit smp_cpus_done(unsigned int max_cpus)
+void __init smp_cpus_done(unsigned int max_cpus)
 {
         zap_low_mappings();
         smp_cleanup_boot();
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index 84cde796ecb1..ac61c186eb02 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -251,7 +251,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
         setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT);
 }
 
-__init void numa_add_cpu(int cpu)
+__cpuinit void numa_add_cpu(int cpu)
 {
         /* BP is initialized elsewhere */
         if (cpu)