6 files changed, 474 insertions, 31 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 9b849e281b45..36dee0ff5ca0 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -495,6 +495,11 @@ config WINCEPT
           MPC821 PowerPC, introduced in 1998 and designed to be used in
           thin-client machines.  Say Y to support it directly.
 
+          Be aware that PCI buses can only function when SYS board is plugged
+          into the PIB (Platform IO Board) board from Freescale which provide
+          3 PCI slots.  The PIBs PCI initialization is the bootloader's
+          responsiblilty.
+
 endchoice
 
 choice
@@ -1153,6 +1158,11 @@ config PCI_DOMAINS
         bool
         default PCI
 
+config MPC83xx_PCI2
+        bool "  Supprt for 2nd PCI host controller"
+        depends on PCI && MPC834x
+        default y if MPC834x_SYS
+
 config PCI_QSPAN
         bool "QSpan PCI"
         depends on !4xx && !CPM2 && 8xx
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index ddd04d4c1ea9..b38a851a64ec 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -62,9 +62,29 @@ extern unsigned long total_memory;	/* in mm/init */
 unsigned char __res[sizeof (bd_t)];
 
 #ifdef CONFIG_PCI
-#error "PCI is not supported"
-/* NEED mpc83xx_map_irq & mpc83xx_exclude_device
-   see platforms/85xx/mpc85xx_ads_common.c */
+int
+mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+        static char pci_irq_table[][4] =
+            /*
+             *      PCI IDSEL/INTPIN->INTLINE
+             *       A      B      C      D
+             */
+        {
+                {PIRQA, PIRQB,  PIRQC,  PIRQD}, /* idsel 0x11 */
+                {PIRQC, PIRQD,  PIRQA,  PIRQB}, /* idsel 0x12 */
+                {PIRQD, PIRQA,  PIRQB,  PIRQC}  /* idsel 0x13 */
+        };
+
+        const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4;
+        return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int
+mpc83xx_exclude_device(u_char bus, u_char devfn)
+{
+        return PCIBIOS_SUCCESSFUL;
+}
 #endif /* CONFIG_PCI */
 
 /* ************************************************************************
@@ -88,7 +108,7 @@ mpc834x_sys_setup_arch(void)
 
 #ifdef CONFIG_PCI
         /* setup PCI host bridges */
-        mpc83xx_sys_setup_hose();
+        mpc83xx_setup_hose();
 #endif
         mpc83xx_early_serial_map();
 
@@ -175,10 +195,17 @@ mpc834x_sys_init_IRQ(void)
                 IRQ_SENSE_LEVEL,        /* EXT 1 */
                 IRQ_SENSE_LEVEL,        /* EXT 2 */
                 0,                      /* EXT 3 */
+#ifdef CONFIG_PCI
+                IRQ_SENSE_LEVEL,        /* EXT 4 */
+                IRQ_SENSE_LEVEL,        /* EXT 5 */
+                IRQ_SENSE_LEVEL,        /* EXT 6 */
+                IRQ_SENSE_LEVEL,        /* EXT 7 */
+#else
                 0,                      /* EXT 4 */
                 0,                      /* EXT 5 */
                 0,                      /* EXT 6 */
                 0,                      /* EXT 7 */
+#endif
         };
 
         ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8);
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index a2f6e49d7151..1584cd77a9ef 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -26,7 +26,7 @@
 #define VIRT_IMMRBAR            ((uint)0xfe000000)
 
 #define BCSR_PHYS_ADDR          ((uint)0xf8000000)
-#define BCSR_SIZE               ((uint)(32 * 1024))
+#define BCSR_SIZE               ((uint)(128 * 1024))
 
 #define BCSR_MISC_REG2_OFF      0x07
 #define BCSR_MISC_REG2_PORESET  0x01
@@ -34,23 +34,25 @@
 #define BCSR_MISC_REG3_OFF      0x08
 #define BCSR_MISC_REG3_CNFLOCK  0x80
 
-#ifdef CONFIG_PCI
-/* PCI interrupt controller */
-#define PIRQA        MPC83xx_IRQ_IRQ4
-#define PIRQB        MPC83xx_IRQ_IRQ5
-#define PIRQC        MPC83xx_IRQ_IRQ6
-#define PIRQD        MPC83xx_IRQ_IRQ7
-
-#define MPC834x_SYS_PCI1_LOWER_IO        0x00000000
-#define MPC834x_SYS_PCI1_UPPER_IO        0x00ffffff
-
-#define MPC834x_SYS_PCI1_LOWER_MEM       0x80000000
-#define MPC834x_SYS_PCI1_UPPER_MEM       0x9fffffff
-
-#define MPC834x_SYS_PCI1_IO_BASE         0xe2000000
-#define MPC834x_SYS_PCI1_MEM_OFFSET      0x00000000
-
-#define MPC834x_SYS_PCI1_IO_SIZE         0x01000000
-#endif /* CONFIG_PCI */
+#define PIRQA   MPC83xx_IRQ_EXT4
+#define PIRQB   MPC83xx_IRQ_EXT5
+#define PIRQC   MPC83xx_IRQ_EXT6
+#define PIRQD   MPC83xx_IRQ_EXT7
+
+#define MPC83xx_PCI1_LOWER_IO   0x00000000
+#define MPC83xx_PCI1_UPPER_IO   0x00ffffff
+#define MPC83xx_PCI1_LOWER_MEM  0x80000000
+#define MPC83xx_PCI1_UPPER_MEM  0x9fffffff
+#define MPC83xx_PCI1_IO_BASE    0xe2000000
+#define MPC83xx_PCI1_MEM_OFFSET 0x00000000
+#define MPC83xx_PCI1_IO_SIZE    0x01000000
+
+#define MPC83xx_PCI2_LOWER_IO   0x00000000
+#define MPC83xx_PCI2_UPPER_IO   0x00ffffff
+#define MPC83xx_PCI2_LOWER_MEM  0xa0000000
+#define MPC83xx_PCI2_UPPER_MEM  0xbfffffff
+#define MPC83xx_PCI2_IO_BASE    0xe3000000
+#define MPC83xx_PCI2_MEM_OFFSET 0x00000000
+#define MPC83xx_PCI2_IO_SIZE    0x01000000
 
 #endif                /* __MACH_MPC83XX_SYS_H__ */
diff --git a/arch/ppc/syslib/ppc83xx_pci.h b/arch/ppc/syslib/ppc83xx_pci.h
new file mode 100644
index 000000000000..ec691640f6be
--- /dev/null
+++ b/arch/ppc/syslib/ppc83xx_pci.h
@@ -0,0 +1,151 @@
+/* Created by Tony Li <tony.li@freescale.com>
+ * Copyright (c) 2005 freescale semiconductor
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PPC_SYSLIB_PPC83XX_PCI_H
+#define __PPC_SYSLIB_PPC83XX_PCI_H
+
+typedef struct immr_clk {
+        u32 spmr; /* system PLL mode Register  */
+        u32 occr; /* output clock control Register  */
+        u32 sccr; /* system clock control Register  */
+        u8 res0[0xF4];
+} immr_clk_t;
+
+/*
+ * Sequencer
+ */
+typedef struct immr_ios {
+        u32     potar0;
+        u8      res0[4];
+        u32     pobar0;
+        u8      res1[4];
+        u32     pocmr0;
+        u8      res2[4];
+        u32     potar1;
+        u8      res3[4];
+        u32     pobar1;
+        u8      res4[4];
+        u32     pocmr1;
+        u8      res5[4];
+        u32     potar2;
+        u8      res6[4];
+        u32     pobar2;
+        u8      res7[4];
+        u32     pocmr2;
+        u8      res8[4];
+        u32     potar3;
+        u8      res9[4];
+        u32     pobar3;
+        u8      res10[4];
+        u32     pocmr3;
+        u8      res11[4];
+        u32     potar4;
+        u8      res12[4];
+        u32     pobar4;
+        u8      res13[4];
+        u32     pocmr4;
+        u8      res14[4];
+        u32     potar5;
+        u8      res15[4];
+        u32     pobar5;
+        u8      res16[4];
+        u32     pocmr5;
+        u8      res17[4];
+        u8      res18[0x60];
+        u32     pmcr;
+        u8      res19[4];
+        u32     dtcr;
+        u8      res20[4];
+} immr_ios_t;
+#define POTAR_TA_MASK   0x000fffff
+#define POBAR_BA_MASK   0x000fffff
+#define POCMR_EN        0x80000000
+#define POCMR_IO        0x40000000 /* 0--memory space 1--I/O space */
+#define POCMR_SE        0x20000000 /* streaming enable */
+#define POCMR_DST       0x10000000 /* 0--PCI1 1--PCI2 */
+#define POCMR_CM_MASK   0x000fffff
+
+/*
+ * PCI Controller Control and Status Registers
+ */
+typedef struct immr_pcictrl {
+        u32     esr;
+        u32     ecdr;
+        u32     eer;
+        u32     eatcr;
+        u32     eacr;
+        u32     eeacr;
+        u32     edlcr;
+        u32     edhcr;
+        u32     gcr;
+        u32     ecr;
+        u32     gsr;
+        u8      res0[12];
+        u32     pitar2;
+        u8      res1[4];
+        u32     pibar2;
+        u32     piebar2;
+        u32     piwar2;
+        u8      res2[4];
+        u32     pitar1;
+        u8      res3[4];
+        u32     pibar1;
+        u32     piebar1;
+        u32     piwar1;
+        u8      res4[4];
+        u32     pitar0;
+        u8      res5[4];
+        u32     pibar0;
+        u8      res6[4];
+        u32     piwar0;
+        u8      res7[132];
+} immr_pcictrl_t;
+#define PITAR_TA_MASK   0x000fffff
+#define PIBAR_MASK      0xffffffff
+#define PIEBAR_EBA_MASK 0x000fffff
+#define PIWAR_EN        0x80000000
+#define PIWAR_PF        0x20000000
+#define PIWAR_RTT_MASK  0x000f0000
+#define PIWAR_RTT_NO_SNOOP      0x00040000
+#define PIWAR_RTT_SNOOP 0x00050000
+#define PIWAR_WTT_MASK  0x0000f000
+#define PIWAR_WTT_NO_SNOOP      0x00004000
+#define PIWAR_WTT_SNOOP 0x00005000
+#define PIWAR_IWS_MASK  0x0000003F
+#define PIWAR_IWS_4K    0x0000000B
+#define PIWAR_IWS_8K    0x0000000C
+#define PIWAR_IWS_16K   0x0000000D
+#define PIWAR_IWS_32K   0x0000000E
+#define PIWAR_IWS_64K   0x0000000F
+#define PIWAR_IWS_128K  0x00000010
+#define PIWAR_IWS_256K  0x00000011
+#define PIWAR_IWS_512K  0x00000012
+#define PIWAR_IWS_1M    0x00000013
+#define PIWAR_IWS_2M    0x00000014
+#define PIWAR_IWS_4M    0x00000015
+#define PIWAR_IWS_8M    0x00000016
+#define PIWAR_IWS_16M   0x00000017
+#define PIWAR_IWS_32M   0x00000018
+#define PIWAR_IWS_64M   0x00000019
+#define PIWAR_IWS_128M  0x0000001A
+#define PIWAR_IWS_256M  0x0000001B
+#define PIWAR_IWS_512M  0x0000001C
+#define PIWAR_IWS_1G    0x0000001D
+#define PIWAR_IWS_2G    0x0000001E
+
+#endif /* __PPC_SYSLIB_PPC83XX_PCI_H */
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index 602a86891f7f..890484e576e7 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -11,6 +11,17 @@
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Added PCI support -- Tony Li <tony.li@freescale.com>
  */
 
 #include <linux/config.h>
@@ -31,6 +42,10 @@
 #include <asm/delay.h>
 
 #include <syslib/ppc83xx_setup.h>
+#if defined(CONFIG_PCI)
+#include <asm/delay.h>
+#include <syslib/ppc83xx_pci.h>
+#endif
 
 phys_addr_t immrbar;
 
@@ -162,4 +177,237 @@ mpc83xx_halt(void)
         for(;;);
 }
 
-/* PCI SUPPORT DOES NOT EXIT, MODEL after ppc85xx_setup.c */
+#if defined(CONFIG_PCI)
+void __init
+mpc83xx_setup_pci1(struct pci_controller *hose)
+{
+        u16 reg16;
+        volatile immr_pcictrl_t * pci_ctrl;
+        volatile immr_ios_t * ios;
+        bd_t *binfo = (bd_t *) __res;
+
+        pci_ctrl = ioremap(binfo->bi_immr_base + 0x8500, sizeof(immr_pcictrl_t));
+        ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t));
+
+        /*
+         * Configure PCI Outbound Translation Windows
+         */
+        ios->potar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POTAR_TA_MASK;
+        ios->pobar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POBAR_BA_MASK;
+        ios->pocmr0 = POCMR_EN |
+                (((0xffffffff - (MPC83xx_PCI1_UPPER_MEM -
+                                MPC83xx_PCI1_LOWER_MEM)) >> 12) & POCMR_CM_MASK);
+
+        /* mapped to PCI1 IO space */
+        ios->potar1 = (MPC83xx_PCI1_LOWER_IO >> 12) & POTAR_TA_MASK;
+        ios->pobar1 = (MPC83xx_PCI1_IO_BASE >> 12) & POBAR_BA_MASK;
+        ios->pocmr1 = POCMR_EN | POCMR_IO |
+                (((0xffffffff - (MPC83xx_PCI1_UPPER_IO -
+                                MPC83xx_PCI1_LOWER_IO)) >> 12) & POCMR_CM_MASK);
+
+        /*
+         * Configure PCI Inbound Translation Windows
+         */
+        pci_ctrl->pitar1 = 0x0;
+        pci_ctrl->pibar1 = 0x0;
+        pci_ctrl->piebar1 = 0x0;
+        pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G;
+
+        /*
+         * Release PCI RST signal
+         */
+        pci_ctrl->gcr = 0;
+        udelay(2000);
+        pci_ctrl->gcr = 1;
+        udelay(2000);
+
+        reg16 = 0xff;
+        early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, &reg16);
+        reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+        early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16);
+
+        /*
+         * Clear non-reserved bits in status register.
+         */
+        early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff);
+        early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80);
+
+        iounmap(pci_ctrl);
+        iounmap(ios);
+}
+
+void __init
+mpc83xx_setup_pci2(struct pci_controller *hose)
+{
+        u16 reg16;
+        volatile immr_pcictrl_t * pci_ctrl;
+        volatile immr_ios_t * ios;
+        bd_t *binfo = (bd_t *) __res;
+
+        pci_ctrl = ioremap(binfo->bi_immr_base + 0x8600, sizeof(immr_pcictrl_t));
+        ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t));
+
+        /*
+         * Configure PCI Outbound Translation Windows
+         */
+        ios->potar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POTAR_TA_MASK;
+        ios->pobar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POBAR_BA_MASK;
+        ios->pocmr3 = POCMR_EN | POCMR_DST |
+                (((0xffffffff - (MPC83xx_PCI2_UPPER_MEM -
+                                MPC83xx_PCI2_LOWER_MEM)) >> 12) & POCMR_CM_MASK);
+
+        /* mapped to PCI2 IO space */
+        ios->potar4 = (MPC83xx_PCI2_LOWER_IO >> 12) & POTAR_TA_MASK;
+        ios->pobar4 = (MPC83xx_PCI2_IO_BASE >> 12) & POBAR_BA_MASK;
+        ios->pocmr4 = POCMR_EN | POCMR_DST | POCMR_IO |
+                (((0xffffffff - (MPC83xx_PCI2_UPPER_IO -
+                                MPC83xx_PCI2_LOWER_IO)) >> 12) & POCMR_CM_MASK);
+
+        /*
+         * Configure PCI Inbound Translation Windows
+         */
+        pci_ctrl->pitar1 = 0x0;
+        pci_ctrl->pibar1 = 0x0;
+        pci_ctrl->piebar1 = 0x0;
+        pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G;
+
+        /*
+         * Release PCI RST signal
+         */
+        pci_ctrl->gcr = 0;
+        udelay(2000);
+        pci_ctrl->gcr = 1;
+        udelay(2000);
+
+        reg16 = 0xff;
+        early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, &reg16);
+        reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+        early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16);
+
+        /*
+         * Clear non-reserved bits in status register.
+         */
+        early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff);
+        early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80);
+
+        iounmap(pci_ctrl);
+        iounmap(ios);
+}
+
+/*
+ * PCI buses can be enabled only if SYS board combinates with PIB
+ * (Platform IO Board) board which provide 3 PCI slots. There is 2 PCI buses
+ * and 3 PCI slots, so people must configure the routes between them before
+ * enable PCI bus. This routes are under the control of PCA9555PW device which
+ * can be accessed via I2C bus 2 and are configured by firmware. Refer to
+ * Freescale to get more information about firmware configuration.
+ */
+
+extern int mpc83xx_exclude_device(u_char bus, u_char devfn);
+extern int mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel,
+                unsigned char pin);
+void __init
+mpc83xx_setup_hose(void)
+{
+        u32 val32;
+        volatile immr_clk_t * clk;
+        struct pci_controller * hose1;
+#ifdef CONFIG_MPC83xx_PCI2
+        struct pci_controller * hose2;
+#endif
+        bd_t * binfo = (bd_t *)__res;
+
+        clk = ioremap(binfo->bi_immr_base + 0xA00,
+                        sizeof(immr_clk_t));
+
+        /*
+         * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+         */
+        val32 = clk->occr;
+        udelay(2000);
+        clk->occr = 0xff000000;
+        udelay(2000);
+
+        iounmap(clk);
+
+        hose1 = pcibios_alloc_controller();
+        if(!hose1)
+                return;
+
+        ppc_md.pci_swizzle = common_swizzle;
+        ppc_md.pci_map_irq = mpc83xx_map_irq;
+
+        hose1->bus_offset = 0;
+        hose1->first_busno = 0;
+        hose1->last_busno = 0xff;
+
+        setup_indirect_pci(hose1, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
+                        binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
+        hose1->set_cfg_type = 1;
+
+        mpc83xx_setup_pci1(hose1);
+
+        hose1->pci_mem_offset = MPC83xx_PCI1_MEM_OFFSET;
+        hose1->mem_space.start = MPC83xx_PCI1_LOWER_MEM;
+        hose1->mem_space.end = MPC83xx_PCI1_UPPER_MEM;
+
+        hose1->io_base_phys = MPC83xx_PCI1_IO_BASE;
+        hose1->io_space.start = MPC83xx_PCI1_LOWER_IO;
+        hose1->io_space.end = MPC83xx_PCI1_UPPER_IO;
+#ifdef CONFIG_MPC83xx_PCI2
+        isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE,
+                        MPC83xx_PCI1_IO_SIZE + MPC83xx_PCI2_IO_SIZE);
+#else
+        isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE,
+                        MPC83xx_PCI1_IO_SIZE);
+#endif /* CONFIG_MPC83xx_PCI2 */
+        hose1->io_base_virt = (void *)isa_io_base;
+        /* setup resources */
+        pci_init_resource(&hose1->io_resource,
+                        MPC83xx_PCI1_LOWER_IO,
+                        MPC83xx_PCI1_UPPER_IO,
+                        IORESOURCE_IO, "PCI host bridge 1");
+        pci_init_resource(&hose1->mem_resources[0],
+                        MPC83xx_PCI1_LOWER_MEM,
+                        MPC83xx_PCI1_UPPER_MEM,
+                        IORESOURCE_MEM, "PCI host bridge 1");
+
+        ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+        hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
+
+#ifdef CONFIG_MPC83xx_PCI2
+        hose2 = pcibios_alloc_controller();
+        if(!hose2)
+                return;
+
+        hose2->bus_offset = hose1->last_busno + 1;
+        hose2->first_busno = hose1->last_busno + 1;
+        hose2->last_busno = 0xff;
+        setup_indirect_pci(hose2, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
+                        binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
+        hose2->set_cfg_type = 1;
+
+        mpc83xx_setup_pci2(hose2);
+
+        hose2->pci_mem_offset = MPC83xx_PCI2_MEM_OFFSET;
+        hose2->mem_space.start = MPC83xx_PCI2_LOWER_MEM;
+        hose2->mem_space.end = MPC83xx_PCI2_UPPER_MEM;
+
+        hose2->io_base_phys = MPC83xx_PCI2_IO_BASE;
+        hose2->io_space.start = MPC83xx_PCI2_LOWER_IO;
+        hose2->io_space.end = MPC83xx_PCI2_UPPER_IO;
+        hose2->io_base_virt = (void *)(isa_io_base + MPC83xx_PCI1_IO_SIZE);
+        /* setup resources */
+        pci_init_resource(&hose2->io_resource,
+                        MPC83xx_PCI2_LOWER_IO,
+                        MPC83xx_PCI2_UPPER_IO,
+                        IORESOURCE_IO, "PCI host bridge 2");
+        pci_init_resource(&hose2->mem_resources[0],
+                        MPC83xx_PCI2_LOWER_MEM,
+                        MPC83xx_PCI2_UPPER_MEM,
+                        IORESOURCE_MEM, "PCI host bridge 2");
+
+        hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
+#endif /* CONFIG_MPC83xx_PCI2 */
+}
+#endif /*CONFIG_PCI*/
diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h
index 683f179b746c..c766c1a5f786 100644
--- a/arch/ppc/syslib/ppc83xx_setup.h
+++ b/arch/ppc/syslib/ppc83xx_setup.h
@@ -12,6 +12,14 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef __PPC_SYSLIB_PPC83XX_SETUP_H
@@ -19,7 +27,6 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <asm/ppcboot.h>
 
 extern unsigned long mpc83xx_find_end_of_memory(void) __init;
 extern long mpc83xx_time_init(void) __init;
@@ -31,13 +38,11 @@ extern void mpc83xx_halt(void);
 extern void mpc83xx_setup_hose(void) __init;
 
 /* PCI config */
-#if 0
-#define PCI1_CFG_ADDR_OFFSET    (FIXME)
-#define PCI1_CFG_DATA_OFFSET    (FIXME)
+#define PCI1_CFG_ADDR_OFFSET (0x8300)
+#define PCI1_CFG_DATA_OFFSET (0x8304)
 
-#define PCI2_CFG_ADDR_OFFSET    (FIXME)
-#define PCI2_CFG_DATA_OFFSET    (FIXME)
-#endif
+#define PCI2_CFG_ADDR_OFFSET (0x8380)
+#define PCI2_CFG_DATA_OFFSET (0x8384)
 
 /* Serial Config */
 #ifdef CONFIG_SERIAL_MANY_PORTS