1 files changed, 112 insertions, 139 deletions

diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
index 41d4a5f93284..b6be705c2a3e 100644
--- a/arch/cris/arch-v10/kernel/signal.c
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -7,7 +7,7 @@
  *
  *  Ideas also taken from arch/arm.
  *
- *  Copyright (C) 2000, 2001 Axis Communications AB
+ *  Copyright (C) 2000-2007 Axis Communications AB
  *
  *  Authors:  Bjorn Wesen (bjornw@axis.com)
  *
@@ -40,84 +40,30 @@
  */
 #define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2;
 
-int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+void do_signal(int canrestart, struct pt_regs *regs);
 
 /*
- * Atomically swap in the new signal mask, and wait for a signal.  Define 
+ * Atomically swap in the new signal mask, and wait for a signal.  Define
  * dummy arguments to be able to reach the regs argument.  (Note that this
  * arrangement relies on old_sigset_t occupying one register.)
  */
-int
-sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, 
-               long srp, struct pt_regs *regs)
+int sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
+        long srp, struct pt_regs *regs)
 {
-        sigset_t saveset;
-
         mask &= _BLOCKABLE;
         spin_lock_irq(&current->sighand->siglock);
-        saveset = current->blocked;
+        current->saved_sigmask = current->blocked;
         siginitset(&current->blocked, mask);
         recalc_sigpending();
         spin_unlock_irq(&current->sighand->siglock);
-
-        regs->r10 = -EINTR;
-        while (1) {
-                current->state = TASK_INTERRUPTIBLE;
-                schedule();
-                if (do_signal(0, &saveset, regs))
-                        /* We will get here twice: once to call the signal
-                           handler, then again to return from the
-                           sigsuspend system call.  When calling the
-                           signal handler, R10 holds the signal number as
-                           set through do_signal.  The sigsuspend call
-                           will return with the restored value set above;
-                           always -EINTR.  */
-                        return regs->r10;
-        }
+        current->state = TASK_INTERRUPTIBLE;
+        schedule();
+        set_thread_flag(TIF_RESTORE_SIGMASK);
+        return -ERESTARTNOHAND;
 }
 
-/* Define dummy arguments to be able to reach the regs argument.  (Note that
- * this arrangement relies on size_t occupying one register.)
- */
-int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, 
-                  long mof, long srp, struct pt_regs *regs)
-{
-        sigset_t saveset, newset;
-
-        /* XXX: Don't preclude handling different sized sigset_t's.  */
-        if (sigsetsize != sizeof(sigset_t))
-                return -EINVAL;
-
-        if (copy_from_user(&newset, unewset, sizeof(newset)))
-                return -EFAULT;
-        sigdelsetmask(&newset, ~_BLOCKABLE);
-
-        spin_lock_irq(&current->sighand->siglock);
-        saveset = current->blocked;
-        current->blocked = newset;
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
-
-        regs->r10 = -EINTR;
-        while (1) {
-                current->state = TASK_INTERRUPTIBLE;
-                schedule();
-                if (do_signal(0, &saveset, regs))
-                        /* We will get here twice: once to call the signal
-                           handler, then again to return from the
-                           sigsuspend system call.  When calling the
-                           signal handler, R10 holds the signal number as
-                           set through do_signal.  The sigsuspend call
-                           will return with the restored value set above;
-                           always -EINTR.  */
-                        return regs->r10;
-        }
-}
-
-int 
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-              struct old_sigaction *oact)
+int sys_sigaction(int sig, const struct old_sigaction __user *act,
+        struct old_sigaction *oact)
 {
         struct k_sigaction new_ka, old_ka;
         int ret;
@@ -147,8 +93,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
         return ret;
 }
 
-int
-sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
+int sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
 {
         return do_sigaltstack(uss, uoss, rdusp());
 }
@@ -205,7 +150,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 
         /* TODO: the other ports use regs->orig_XX to disable syscall checks
          * after this completes, but we don't use that mechanism. maybe we can
-         * use it now ? 
+         * use it now ?
          */
 
         return err;
@@ -216,7 +161,7 @@ badframe:
 
 /* Define dummy arguments to be able to reach the regs argument.  */
 
-asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof, 
+asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
                              long srp, struct pt_regs *regs)
 {
         struct sigframe __user *frame = (struct sigframe *)rdusp();
@@ -243,7 +188,7 @@ asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
         current->blocked = set;
         recalc_sigpending();
         spin_unlock_irq(&current->sighand->siglock);
-        
+
         if (restore_sigcontext(regs, &frame->sc))
                 goto badframe;
 
@@ -254,11 +199,11 @@ asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
 badframe:
         force_sig(SIGSEGV, current);
         return 0;
-}       
+}
 
 /* Define dummy arguments to be able to reach the regs argument.  */
 
-asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13, 
+asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
                                 long mof, long srp, struct pt_regs *regs)
 {
         struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
@@ -282,7 +227,7 @@ asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
         current->blocked = set;
         recalc_sigpending();
         spin_unlock_irq(&current->sighand->siglock);
-        
+
         if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
                 goto badframe;
 
@@ -294,14 +239,14 @@ asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
 badframe:
         force_sig(SIGSEGV, current);
         return 0;
-}       
+}
 
 /*
  * Set up a signal frame.
  */
 
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask)
+static int setup_sigcontext(struct sigcontext __user *sc,
+        struct pt_regs *regs, unsigned long mask)
 {
         int err = 0;
         unsigned long usp = rdusp();
@@ -324,10 +269,11 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned lo
         return err;
 }
 
-/* figure out where we want to put the new signal frame - usually on the stack */
+/* Figure out where we want to put the new signal frame
+ * - usually on the stack. */
 
 static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
         unsigned long sp = rdusp();
 
@@ -345,15 +291,15 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 }
 
 /* grab and setup a signal frame.
- * 
+ *
  * basically we stack a lot of state info, and arrange for the
  * user-mode program to return to the kernel using either a
  * trampoline which performs the syscall sigreturn, or a provided
  * user-mode trampoline.
  */
 
-static void setup_frame(int sig, struct k_sigaction *ka,
-                        sigset_t *set, struct pt_regs * regs)
+static int setup_frame(int sig, struct k_sigaction *ka,
+                       sigset_t *set, struct pt_regs *regs)
 {
         struct sigframe __user *frame;
         unsigned long return_ip;
@@ -401,14 +347,15 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 
         wrusp((unsigned long)frame);
 
-        return;
+        return 0;
 
 give_sigsegv:
         force_sigsegv(sig, current);
+        return -EFAULT;
 }
 
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-                           sigset_t *set, struct pt_regs * regs)
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+        sigset_t *set, struct pt_regs *regs)
 {
         struct rt_sigframe __user *frame;
         unsigned long return_ip;
@@ -443,9 +390,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
                 /* trampoline - the desired return ip is the retcode itself */
                 return_ip = (unsigned long)&frame->retcode;
                 /* This is movu.w __NR_rt_sigreturn, r9; break 13; */
-                err |= __put_user(0x9c5f,            (short __user*)(frame->retcode+0));
-                err |= __put_user(__NR_rt_sigreturn, (short __user*)(frame->retcode+2));
-                err |= __put_user(0xe93d,            (short __user*)(frame->retcode+4));
+                err |= __put_user(0x9c5f, (short __user *)(frame->retcode+0));
+                err |= __put_user(__NR_rt_sigreturn,
+                        (short __user *)(frame->retcode+2));
+                err |= __put_user(0xe93d, (short __user *)(frame->retcode+4));
         }
 
         if (err)
@@ -455,73 +403,81 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
         /* Set up registers for signal handler */
 
-        regs->irp = (unsigned long) ka->sa.sa_handler;  /* what we enter NOW   */
-        regs->srp = return_ip;                          /* what we enter LATER */
-        regs->r10 = sig;                                /* first argument is signo */
-        regs->r11 = (unsigned long) &frame->info;       /* second argument is (siginfo_t *) */
-        regs->r12 = 0;                                  /* third argument is unused */
-
-        /* actually move the usp to reflect the stacked frame */
-
+        /* What we enter NOW   */
+        regs->irp = (unsigned long) ka->sa.sa_handler;
+        /* What we enter LATER */
+        regs->srp = return_ip;
+        /* First argument is signo */
+        regs->r10 = sig;
+        /* Second argument is (siginfo_t *) */
+        regs->r11 = (unsigned long)&frame->info;
+        /* Third argument is unused */
+        regs->r12 = 0;
+
+        /* Actually move the usp to reflect the stacked frame */
         wrusp((unsigned long)frame);
 
-        return;
+        return 0;
 
 give_sigsegv:
         force_sigsegv(sig, current);
+        return -EFAULT;
 }
 
 /*
  * OK, we're invoking a handler
- */     
+ */
 
-static inline void
-handle_signal(int canrestart, unsigned long sig,
-              siginfo_t *info, struct k_sigaction *ka,
-              sigset_t *oldset, struct pt_regs * regs)
+static inline int handle_signal(int canrestart, unsigned long sig,
+        siginfo_t *info, struct k_sigaction *ka,
+        sigset_t *oldset, struct pt_regs *regs)
 {
+        int ret;
+
         /* Are we from a system call? */
         if (canrestart) {
                 /* If so, check system call restarting.. */
                 switch (regs->r10) {
-                        case -ERESTART_RESTARTBLOCK:
-                        case -ERESTARTNOHAND:
-                                /* ERESTARTNOHAND means that the syscall should only be
-                                   restarted if there was no handler for the signal, and since
-                                   we only get here if there is a handler, we don't restart */
+                case -ERESTART_RESTARTBLOCK:
+                case -ERESTARTNOHAND:
+                        /* ERESTARTNOHAND means that the syscall should
+                         * only be restarted if there was no handler for
+                         * the signal, and since we only get here if there
+                         * is a handler, we don't restart */
+                        regs->r10 = -EINTR;
+                        break;
+                case -ERESTARTSYS:
+                        /* ERESTARTSYS means to restart the syscall if
+                         * there is no handler or the handler was
+                         * registered with SA_RESTART */
+                        if (!(ka->sa.sa_flags & SA_RESTART)) {
                                 regs->r10 = -EINTR;
                                 break;
-
-                        case -ERESTARTSYS:
-                                /* ERESTARTSYS means to restart the syscall if there is no
-                                   handler or the handler was registered with SA_RESTART */
-                                if (!(ka->sa.sa_flags & SA_RESTART)) {
-                                        regs->r10 = -EINTR;
-                                        break;
-                                }
-                        /* fallthrough */
-                        case -ERESTARTNOINTR:
-                                /* ERESTARTNOINTR means that the syscall should be called again
-                                   after the signal handler returns. */
-                                RESTART_CRIS_SYS(regs);
+                        }
+                /* fallthrough */
+                case -ERESTARTNOINTR:
+                        /* ERESTARTNOINTR means that the syscall should
+                         * be called again after the signal handler returns. */
+                        RESTART_CRIS_SYS(regs);
                 }
         }
 
         /* Set up the stack frame */
         if (ka->sa.sa_flags & SA_SIGINFO)
-                setup_rt_frame(sig, ka, info, oldset, regs);
+                ret = setup_rt_frame(sig, ka, info, oldset, regs);
         else
-                setup_frame(sig, ka, oldset, regs);
-
-        if (ka->sa.sa_flags & SA_ONESHOT)
-                ka->sa.sa_handler = SIG_DFL;
-
-        spin_lock_irq(&current->sighand->siglock);
-        sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-        if (!(ka->sa.sa_flags & SA_NODEFER))
-                sigaddset(&current->blocked,sig);
-        recalc_sigpending();
-        spin_unlock_irq(&current->sighand->siglock);
+                ret = setup_frame(sig, ka, oldset, regs);
+
+        if (ret == 0) {
+                spin_lock_irq(&current->sighand->siglock);
+                sigorsets(&current->blocked, &current->blocked,
+                        &ka->sa.sa_mask);
+                if (!(ka->sa.sa_flags & SA_NODEFER))
+                        sigaddset(&current->blocked, sig);
+                recalc_sigpending();
+                spin_unlock_irq(&current->sighand->siglock);
+        }
+        return ret;
 }
 
 /*
@@ -536,11 +492,12 @@ handle_signal(int canrestart, unsigned long sig,
  * mode below.
  */
 
-int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
+void do_signal(int canrestart, struct pt_regs *regs)
 {
         siginfo_t info;
         int signr;
         struct k_sigaction ka;
+        sigset_t *oldset;
 
         /*
          * We want the common case to go fast, which
@@ -549,16 +506,26 @@ int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
          * if so.
          */
         if (!user_mode(regs))
-                return 1;
+                return;
 
-        if (!oldset)
+        if (test_thread_flag(TIF_RESTORE_SIGMASK))
+                oldset = &current->saved_sigmask;
+        else
                 oldset = &current->blocked;
 
         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
         if (signr > 0) {
                 /* Whee!  Actually deliver the signal.  */
-                handle_signal(canrestart, signr, &info, &ka, oldset, regs);
-                return 1;
+                if (handle_signal(canrestart, signr, &info, &ka,
+                                oldset, regs)) {
+                        /* a signal was successfully delivered; the saved
+                         * sigmask will have been stored in the signal frame,
+                         * and will be restored by sigreturn, so we can simply
+                         * clear the TIF_RESTORE_SIGMASK flag */
+                        if (test_thread_flag(TIF_RESTORE_SIGMASK))
+                                clear_thread_flag(TIF_RESTORE_SIGMASK);
+                }
+                return;
         }
 
         /* Did we come from a system call? */
@@ -569,10 +536,16 @@ int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
                     regs->r10 == -ERESTARTNOINTR) {
                         RESTART_CRIS_SYS(regs);
                 }
-                if (regs->r10 == -ERESTART_RESTARTBLOCK){
+                if (regs->r10 == -ERESTART_RESTARTBLOCK) {
                         regs->r10 = __NR_restart_syscall;
                         regs->irp -= 2;
                 }
         }
-        return 0;
+
+        /* if there's no signal to deliver, we just put the saved sigmask
+         * back */
+        if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+                clear_thread_flag(TIF_RESTORE_SIGMASK);
+                sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+        }
 }