8 files changed, 110 insertions, 44 deletions

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index eb2cb31825c0..f238df66efd4 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb5..fec1bb19b9ff 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -146,7 +146,7 @@ static struct platform_device overo_smsc911x_device = {
         .name           = "smsc911x",
         .id             = -1,
         .num_resources  = ARRAY_SIZE(overo_smsc911x_resources),
-        .resource       = &overo_smsc911x_resources,
+        .resource       = overo_smsc911x_resources,
         .dev            = {
                 .platform_data = &overo_smsc911x_config,
         },
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a0bf6744a05..56d931a425f7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
         .setup                  = rx51_twlgpio_setup,
 };
 
+static struct twl4030_usb_data rx51_usb_data = {
+        .usb_mode               = T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data rx51_twldata = {
         .irq_base               = TWL4030_IRQ_BASE,
         .irq_end                = TWL4030_IRQ_END,
@@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
         .gpio                   = &rx51_gpio_data,
         .keypad                 = &rx51_kp_data,
         .madc                   = &rx51_madc_data,
+        .usb                    = &rx51_usb_data,
 
         .vaux1                  = &rx51_vaux1,
         .vaux2                  = &rx51_vaux2,
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 1541fd4c8d0f..3c04c2f1b23f 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev)
                                 if (i != 0)
                                         break;
                                 ret = PTR_ERR(reg);
+                                hsmmc[i].vcc = NULL;
                                 goto err;
                         }
                         hsmmc[i].vcc = reg;
@@ -165,8 +166,13 @@ done:
 static void twl_mmc_cleanup(struct device *dev)
 {
         struct omap_mmc_platform_data *mmc = dev->platform_data;
+        int i;
 
         gpio_free(mmc->slots[0].switch_pin);
+        for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+                regulator_put(hsmmc[i].vcc);
+                regulator_put(hsmmc[i].vcc_aux);
+        }
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7677a4a1cef2..e3ac94f09006 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -946,7 +946,9 @@ void omap_start_dma(int lch)
 
                         cur_lch = next_lch;
                 } while (next_lch != -1);
-        } else if (cpu_class_is_omap2()) {
+        } else if (cpu_is_omap242x() ||
+                (cpu_is_omap243x() &&  omap_type() <= OMAP2430_REV_ES1_0)) {
+
                 /* Errata: Need to write lch even if not using chaining */
                 dma_write(lch, CLNK_CTRL(lch));
         }
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c12423..9c16ca8d293c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
         __raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-        struct gpio_bank *bank;
         void __iomem *reg;
 
         if (check_gpio(gpio) < 0)
                 return -EINVAL;
-        bank = get_gpio_bank(gpio);
         reg = bank->base;
         switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
                         & (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+        void __iomem *reg;
+
+        if (check_gpio(gpio) < 0)
+                return -EINVAL;
+        reg = bank->base;
+
+        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+        case METHOD_MPUIO:
+                reg += OMAP_MPUIO_OUTPUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+        case METHOD_GPIO_1510:
+                reg += OMAP1510_GPIO_DATA_OUTPUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+        case METHOD_GPIO_1610:
+                reg += OMAP1610_GPIO_DATAOUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+        case METHOD_GPIO_730:
+                reg += OMAP730_GPIO_DATA_OUTPUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DATA_OUTPUT;
+                break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+                defined(CONFIG_ARCH_OMAP4)
+        case METHOD_GPIO_24XX:
+                reg += OMAP24XX_GPIO_DATAOUT;
+                break;
+#endif
+        default:
+                return -EINVAL;
+        }
+
+        return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set) \
 do {    \
         int l = __raw_readl(base + reg); \
@@ -1350,9 +1395,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
         return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+        void __iomem *reg = bank->base;
+
+        switch (bank->method) {
+        case METHOD_MPUIO:
+                reg += OMAP_MPUIO_IO_CNTL;
+                break;
+        case METHOD_GPIO_1510:
+                reg += OMAP1510_GPIO_DIR_CONTROL;
+                break;
+        case METHOD_GPIO_1610:
+                reg += OMAP1610_GPIO_DIRECTION;
+                break;
+        case METHOD_GPIO_730:
+                reg += OMAP730_GPIO_DIR_CONTROL;
+                break;
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DIR_CONTROL;
+                break;
+        case METHOD_GPIO_24XX:
+                reg += OMAP24XX_GPIO_OE;
+                break;
+        }
+        return __raw_readl(reg) & mask;
+}
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-        return __omap_get_gpio_datain(chip->base + offset);
+        struct gpio_bank *bank;
+        void __iomem *reg;
+        int gpio;
+        u32 mask;
+
+        gpio = chip->base + offset;
+        bank = get_gpio_bank(gpio);
+        reg = bank->base;
+        mask = 1 << get_gpio_index(gpio);
+
+        if (gpio_is_input(bank, mask))
+                return _get_gpio_datain(bank, gpio);
+        else
+                return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1886,34 +1971,6 @@ arch_initcall(omap_gpio_sysinit);
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-        void __iomem *reg = bank->base;
-
-        switch (bank->method) {
-        case METHOD_MPUIO:
-                reg += OMAP_MPUIO_IO_CNTL;
-                break;
-        case METHOD_GPIO_1510:
-                reg += OMAP1510_GPIO_DIR_CONTROL;
-                break;
-        case METHOD_GPIO_1610:
-                reg += OMAP1610_GPIO_DIRECTION;
-                break;
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DIR_CONTROL;
-                break;
-        case METHOD_GPIO_850:
-                reg += OMAP850_GPIO_DIR_CONTROL;
-                break;
-        case METHOD_GPIO_24XX:
-                reg += OMAP24XX_GPIO_OE;
-                break;
-        }
-        return __raw_readl(reg) & mask;
-}
-
-
 static int dbg_gpio_show(struct seq_file *s, void *unused)
 {
         unsigned        i, j, gpio;
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 285eaa3a8275..11e73d9e8928 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()    (cpu_is_omap24xx() || cpu_is_omap34xx() || \
                                 cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-                        defined(CONFIG_ARCH_OMAP4)
-
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS          0x24200024
 #define OMAP2420_REV_ES1_0      0x24200024
@@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4ea73804d21e..2890b11f2387 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -44,9 +44,9 @@
 #define OMAP2_SRAM_VA           0xe3000000
 #define OMAP2_SRAM_PUB_VA       (OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_VA           0xe3000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
-#define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
 #define OMAP4_SRAM_PA           0x40200000              /*0x402f0000*/
 #define OMAP4_SRAM_VA           0xd7000000              /*0xd70f0000*/