9 files changed, 142 insertions, 88 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9618dcfa66f3..5c691c658074 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -627,7 +627,7 @@ config ARCH_S3C2410
 
 config ARCH_S3C64XX
         bool "Samsung S3C64XX"
-        select PLAT_S3C
+        select PLAT_SAMSUNG
         select CPU_V6
         select GENERIC_GPIO
         select ARM_VIC
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5cb9326df7a7..91344af75f39 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,7 +117,7 @@ config DEBUG_CLPS711X_UART2
           cause the debug messages to appear on the first serial port.
 
 config DEBUG_S3C_UART
-        depends on PLAT_S3C
+        depends on PLAT_SAMSUNG
         int "S3C UART to use for low-level debug"
         default "0"
         help
diff --git a/arch/arm/mach-s5pc100/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h
new file mode 100644
index 000000000000..819acf5eaf89
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5PC100 systems
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
new file mode 100644
index 000000000000..47ffb17aff96
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5pc100/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
new file mode 100644
index 000000000000..61b95158a437
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END       (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 2367908c4f62..6108ba9c2bee 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -9,88 +9,3 @@ config PLAT_S3C
         select NO_IOPORT
         help
           Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
-        bool
-        default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-        bool
-        default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-        bool
-        help
-          Selected if there is an S3C2410 (or register compatible) serial
-          low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-        bool
-        help
-          Selected if there is an S3C2440 (or register compatible) serial
-          low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-        bool "S3C Initialisation watchdog"
-        depends on S3C2410_WATCHDOG
-        help
-          Say y to enable the watchdog during the kernel decompression
-          stage. If the kernel fails to uncompress, then the watchdog
-          will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-        bool "S3C Reboot on decompression error"
-        help
-          Say y here to use the watchdog to reset the system if the
-          kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-         uncompressor
-
-
-config S3C_LOWLEVEL_UART_PORT
-        int "S3C UART to use for low-level messages"
-        default 0
-        help
-          Choice of which UART port to use for the low-level messages,
-          such as the `Uncompressing...` at start time. The value of
-          this configuration should be between zero and two. The port
-          must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
-        int "Space between gpio banks"
-        default 0
-        help
-          Add a number of spare GPIO entries between each bank for debugging
-          purposes. This allows any problems where an counter overflows from
-          one bank to another to be caught, at the expense of using a little
-          more memory.
-
-config S3C_GPIO_TRACK
-        bool
-        help
-          Internal configuration option to enable the s3c specific gpio
-          chip tracking if the platform requires it.
-
-# DMA
-
-config S3C_DMA
-        bool
-        help
-          Internal configuration for S3C DMA core
-
-endif
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 0cc5760b668a..6e93ef8f3d43 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -14,6 +14,28 @@ config PLAT_S3C24XX
 
 if PLAT_S3C24XX
 
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+        bool
+        default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+        bool
+        default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+        bool
+        help
+          Selected if there is an S3C2410 (or register compatible) serial
+          low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+        bool
+        help
+          Selected if there is an S3C2440 (or register compatible) serial
+          low-level implementation needed
+
 # code that is shared between a number of the s3c24xx implementations
 
 config S3C2410_CLOCK
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index fca6dade9fd9..e5d1305764a3 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -9,7 +9,6 @@ config PLAT_S5P
         bool
         depends on ARCH_S5P6440
         default y
-        select PLAT_S3C
         select ARM_VIC
         select NO_IOPORT
         select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 72da6461db12..93bd89385f59 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,43 @@ config PLAT_SAMSUNG
 
 if PLAT_SAMSUNG
 
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+        bool "S3C Initialisation watchdog"
+        depends on S3C2410_WATCHDOG
+        help
+          Say y to enable the watchdog during the kernel decompression
+          stage. If the kernel fails to uncompress, then the watchdog
+          will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+        bool "S3C Reboot on decompression error"
+        help
+          Say y here to use the watchdog to reset the system if the
+          kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+         uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+        int "S3C UART to use for low-level messages"
+        default 0
+        help
+          Choice of which UART port to use for the low-level messages,
+          such as the `Uncompressing...` at start time. The value of
+          this configuration should be between zero and two. The port
+          must have been initialised by the boot-loader before use.
+
+# clock options
+
 config SAMSUNG_CLKSRC
         bool
         help
@@ -81,6 +118,21 @@ config SAMSUNG_GPIO_EXTRA
           provides. This allows expanding the GPIO space for use with
           GPIO expanders.
 
+config S3C_GPIO_SPACE
+        int "Space between gpio banks"
+        default 0
+        help
+          Add a number of spare GPIO entries between each bank for debugging
+          purposes. This allows any problems where an counter overflows from
+          one bank to another to be caught, at the expense of using a little
+          more memory.
+
+config S3C_GPIO_TRACK
+        bool
+        help
+          Internal configuration option to enable the s3c specific gpio
+          chip tracking if the platform requires it.
+
 # ADC driver
 
 config S3C_ADC
@@ -138,6 +190,13 @@ config S3C64XX_DEV_SPI
           Compile in platform device definitions for S3C64XX's type
           SPI controllers.
 
+# DMA
+
+config S3C_DMA
+        bool
+        help
+          Internal configuration for S3C DMA core
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG