14 files changed, 21 insertions, 21 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 57f23b465392..e316bd93313f 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI
              into the kernel and we can use the standard read[bwl]/write[bwl]
              macros. This is the preferred method due to speed but it
              limits the system to just 64MB of PCI memory. This can be 
-             problamatic if using video cards and other memory-heavy devices.
+             problematic if using video cards and other memory-heavy devices.
           
           2) If > 64MB of memory space is required, the IXP4xx can be 
              configured to use indirect registers to access PCI This allows 
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 147b01928a9b..6f4c6a1798c1 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -8,7 +8,7 @@ config MACH_KEV7A400
         help
           Say Y here if you are using the Sharp KEV7A400 development
           board.  This hardware is discontinued, so I'd be very
-          suprised if you wanted this option.
+          surprised if you wanted this option.
 
 config MACH_LPD7A400
         bool "LPD7A400 Card Engine"
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63965c78de8c..9aa26b99045d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -91,7 +91,7 @@ config SMDK2440_CPU2442
 config MACH_S3C2413
         bool
         help
-          Internal node for S3C2413 verison of SMDK2413, so that
+          Internal node for S3C2413 version of SMDK2413, so that
           machine_is_s3c2413() will work when MACH_SMDK2413 is
           selected
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c0bfb8212b77..b09a19f87d68 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -197,7 +197,7 @@ config CPU_ARM940T
         select CPU_CP15_MPU
         help
           ARM940T is a member of the ARM9TDMI family of general-
-          purpose microprocessors with MPU and seperate 4KB
+          purpose microprocessors with MPU and separate 4KB
           instruction and 4KB data cases, each with a 4-word line
           length.
 
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9accb3..c7ea9efd0104 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
         depends on ETRAX_ARCH_V10
         default "95a6"
         help
-          Waitstates for SRAM, Flash and peripherials (not DRAM).  95f8 is a
+          Waitstates for SRAM, Flash and peripherals (not DRAM).  95f8 is a
           good choice for most Axis products...
 
 config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3a5304..e7e724bc0ba6 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
         default "0"
         help
           This controls the initial value of the trickle charge register.
-          0 = disabled (use this if you are unsure or have a non rechargable battery)
+          0 = disabled (use this if you are unsure or have a non rechargeable battery)
           Otherwise the following values can be OR:ed together to control the
           charge current:
           1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a33097f95362..f64624fc4504 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN
         help
           Enables the DMA7 input channel for ser0 (ttyS0).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
@@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN
         help
           Enables the DMA5 input channel for ser1 (ttyS1).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want this on, unless you use the DMA channel for
           something else.
 
@@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN
         help
           Enables the DMA3 input channel for ser2 (ttyS2).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
@@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN
         help
           Enables the DMA9 input channel for ser3 (ttyS3).
           If you do not enable DMA, an interrupt for each character will be
-          used when receiveing data.
+          used when receiving data.
           Normally you want to use DMA, unless you use the DMA channel for
           something else.
 
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6d920d4bdc3d..c1bc22c6d0d8 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -565,7 +565,7 @@ config ROMVEC
         depends on ROM
         help
           This is almost always the same as the base of the ROM. Since on all
-          68000 type varients the vectors are at the base of the boot device
+          68000 type variants the vectors are at the base of the boot device
           on system startup.
 
 config ROMVECSIZE
@@ -574,7 +574,7 @@ config ROMVECSIZE
         depends on ROM
         help
           Define the size of the vector region in ROM. For most 68000
-          varients this would be 0x400 bytes in size. Set to 0 if you do
+          variants this would be 0x400 bytes in size. Set to 0 if you do
           not want a vector region at the start of the ROM.
 
 config ROMSTART
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1443024b1c7c..22bb540b5c05 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -865,7 +865,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
         bool
 
 #
-# Endianess selection.  Suffiently obscure so many users don't know what to
+# Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
 # choice statement should be more obvious to the user.
 #
@@ -874,7 +874,7 @@ choice
         help
           Some MIPS machines can be configured for either little or big endian
           byte order. These modes require different kernels and a different
-          Linux distribution.  In general there is one prefered byteorder for a
+          Linux distribution.  In general there is one preferred byteorder for a
           particular system but some systems are just as commonly used in the
           one or the other endianess.
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0673dbedb241..116d7d3683ed 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -425,7 +425,7 @@ config PPC_MAPLE
         default n
         help
           This option enables support for the Maple 970FX Evaluation Board.
-          For more informations, refer to <http://www.970eval.com>
+          For more information, refer to <http://www.970eval.com>
 
 config PPC_PASEMI
         depends on PPC_MULTIPLATFORM && PPC64
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7edb6b461382..edcd5b875b66 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -21,7 +21,7 @@ config MPC834x_SYS
           Be aware that PCI buses can only function when SYS board is plugged
           into the PIB (Platform IO Board) board from Freescale which provide
           3 PCI slots.  The PIBs PCI initialization is the bootloader's
-          responsiblilty.
+          responsibility.
 
 config MPC834x_ITX
         bool "Freescale MPC834x ITX"
@@ -30,7 +30,7 @@ config MPC834x_ITX
           This option enables support for the MPC 834x ITX evaluation board.
 
           Be aware that PCI initialization is the bootloader's
-          responsiblilty.
+          responsibility.
 
 config MPC8360E_PB
         bool "Freescale MPC8360E PB"
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 077711e63104..ef018e25fb07 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -724,7 +724,7 @@ config MPC834x_SYS
           Be aware that PCI buses can only function when SYS board is plugged
           into the PIB (Platform IO Board) board from Freescale which provide
           3 PCI slots.  The PIBs PCI initialization is the bootloader's
-          responsiblilty.
+          responsibility.
 
 config EV64360
         bool "Marvell-EV64360BP"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6a461d4caeff..bffc7e176970 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -217,7 +217,7 @@ config SH_SHMIN
         bool "SHMIN"
         select CPU_SUBTYPE_SH7706
         help
-          Select SHMIN if configureing for the SHMIN board
+          Select SHMIN if configuring for the SHMIN board.
 
 config SH_UNKNOWN
         bool "BareCPU"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 2f96610a83e9..92a7c8a636d3 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -212,8 +212,8 @@ config SPARC_LED
         tristate "Sun4m LED driver"
         help
           This driver toggles the front-panel LED on sun4m systems
-          in a user-specifyable manner.  It's state can be probed
-          by reading /proc/led and it's blinking mode can be changed
+          in a user-specifiable manner.  Its state can be probed
+          by reading /proc/led and its blinking mode can be changed
           via writes to /proc/led
 
 source "fs/Kconfig.binfmt"