3 files changed, 7 insertions, 2 deletions

diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cd0c8b1e1ecf..14e9947bad6e 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
                 break;
         case VPBE_ENC_CUSTOM_TIMINGS:
                 if (pclock <= 27000000) {
-                        v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-                             DM644X_VPSS_DACCLKEN;
+                        v |= DM644X_VPSS_DACCLKEN;
                         writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
                 } else {
                         /*
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41dfbfa..378590694447 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
         } else
                 return;
 
+        /* Make sure that the GPIO pins are muxed correctly */
+        omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
         err = gpio_request_array(igep_wlan_bt_gpios,
                                  ARRAY_SIZE(igep_wlan_bt_gpios));
         if (err) {
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 44c42057b61c..a256135d8e48 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 {
         /* PMIC part*/
         omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+        omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
         omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
         /* Register additional devices on i2c1 bus if needed */