501 files changed, 7242 insertions, 6234 deletions

diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 8da75dede52e..264f52b5c52d 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 357d4021e2d0..b3c8cce0f8fb 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 7d61ae6e75da..953ba0297fc4 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
 # CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
 
 #
 # All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_ARMMMCI=y
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 63a481fbbed4..338ff19ae447 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
         *p = res | mask;
         raw_local_irq_restore(flags);
 
-        return res & mask;
+        return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
         *p = res & ~mask;
         raw_local_irq_restore(flags);
 
-        return res & mask;
+        return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
         *p = res ^ mask;
         raw_local_irq_restore(flags);
 
-        return res & mask;
+        return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c3b911ee9151..6aac3f5bb2f3 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE       4096
 
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a45ab5dd8255..c2f1605de359 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
         if (tlb_flag(TLB_WB))
                 dsb();
 
-        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+        if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
                 if (tlb_flag(TLB_V3_FULL))
                         asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
                 if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
                 if (tlb_flag(TLB_V4_I_FULL))
                         asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
         }
+        put_cpu();
 
         if (tlb_flag(TLB_V6_U_ASID))
                 asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 322410be573c..0022b4d57f8b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -608,33 +608,33 @@ call_fpe:
  THUMB( add     pc, r8                  )
         nop
 
-        W(mov)  pc, lr                          @ CP#0
+        movw_pc lr                              @ CP#0
         W(b)    do_fpe                          @ CP#1 (FPE)
         W(b)    do_fpe                          @ CP#2 (FPE)
-        W(mov)  pc, lr                          @ CP#3
+        movw_pc lr                              @ CP#3
 #ifdef CONFIG_CRUNCH
         b       crunch_task_enable              @ CP#4 (MaverickCrunch)
         b       crunch_task_enable              @ CP#5 (MaverickCrunch)
         b       crunch_task_enable              @ CP#6 (MaverickCrunch)
 #else
-        W(mov)  pc, lr                          @ CP#4
-        W(mov)  pc, lr                          @ CP#5
-        W(mov)  pc, lr                          @ CP#6
+        movw_pc lr                              @ CP#4
+        movw_pc lr                              @ CP#5
+        movw_pc lr                              @ CP#6
 #endif
-        W(mov)  pc, lr                          @ CP#7
-        W(mov)  pc, lr                          @ CP#8
-        W(mov)  pc, lr                          @ CP#9
+        movw_pc lr                              @ CP#7
+        movw_pc lr                              @ CP#8
+        movw_pc lr                              @ CP#9
 #ifdef CONFIG_VFP
         W(b)    do_vfp                          @ CP#10 (VFP)
         W(b)    do_vfp                          @ CP#11 (VFP)
 #else
-        W(mov)  pc, lr                          @ CP#10 (VFP)
-        W(mov)  pc, lr                          @ CP#11 (VFP)
+        movw_pc lr                              @ CP#10 (VFP)
+        movw_pc lr                              @ CP#11 (VFP)
 #endif
-        W(mov)  pc, lr                          @ CP#12
-        W(mov)  pc, lr                          @ CP#13
-        W(mov)  pc, lr                          @ CP#14 (Debug)
-        W(mov)  pc, lr                          @ CP#15 (Control)
+        movw_pc lr                              @ CP#12
+        movw_pc lr                              @ CP#13
+        movw_pc lr                              @ CP#14 (Debug)
+        movw_pc lr                              @ CP#15 (Control)
 
 #ifdef CONFIG_NEON
         .align  6
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ac34c0d9384b..7e9ed1eea40a 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -110,6 +110,13 @@
         mov     \rd, sp, lsr #13
         mov     \rd, \rd, lsl #13
         .endm
+
+        @
+        @ 32-bit wide "mov pc, reg"
+        @
+        .macro  movw_pc, reg
+        mov     pc, \reg
+        .endm
 #else   /* CONFIG_THUMB2_KERNEL */
         .macro  svc_exit, rpsr
         clrex                                   @ clear the exclusive monitor
@@ -146,6 +153,14 @@
         lsr     \rd, \rd, #13
         mov     \rd, \rd, lsl #13
         .endm
+
+        @
+        @ 32-bit wide "mov pc, reg"
+        @
+        .macro  movw_pc, reg
+        mov     pc, \reg
+        nop
+        .endm
 #endif  /* !CONFIG_THUMB2_KERNEL */
 
 /*
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 790fbee92ec5..0d96d0171c05 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 }
 
 /*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+        elf_core_copy_regs(elfregs, task_pt_regs(t));
+        return 1;
+}
+
+/*
  * fill in the fpe structure for a core dump...
  */
 int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 4cdc4a0bd02d..d38cdf2c8276 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/errno.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 467b69ed1021..f838f36eb702 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-        printk("[<%08lx>] ", where);
-        print_symbol("(%s) ", where);
-        printk("from [<%08lx>] ", from);
-        print_symbol("(%s)\n", from);
+        char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+        sprint_symbol(sym1, where);
+        sprint_symbol(sym2, from);
+        printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
         printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
         if (in_exception_text(where))
-                dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+                dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+                     unsigned long top)
 {
-        unsigned long p = bottom & ~31;
+        unsigned long first;
         mm_segment_t fs;
         int i;
 
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
         fs = get_fs();
         set_fs(KERNEL_DS);
 
-        printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+        printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
-        for (p = bottom & ~31; p < top;) {
-                printk("%04lx: ", p & 0xffff);
+        for (first = bottom & ~31; first < top; first += 32) {
+                unsigned long p;
+                char str[sizeof(" 12345678") * 8 + 1];
 
-                for (i = 0; i < 8; i++, p += 4) {
-                        unsigned int val;
+                memset(str, ' ', sizeof(str));
+                str[sizeof(str) - 1] = '\0';
 
-                        if (p < bottom || p >= top)
-                                printk("         ");
-                        else {
-                                __get_user(val, (unsigned long *)p);
-                                printk("%08x ", val);
+                for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+                        if (p >= bottom && p < top) {
+                                unsigned long val;
+                                if (__get_user(val, (unsigned long *)p) == 0)
+                                        sprintf(str + i * 9, " %08lx", val);
+                                else
+                                        sprintf(str + i * 9, " ????????");
                         }
                 }
-                printk ("\n");
+                printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
         }
 
         set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
         unsigned long addr = instruction_pointer(regs);
         const int thumb = thumb_mode(regs);
         const int width = thumb ? 4 : 8;
         mm_segment_t fs;
+        char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
         int i;
 
         /*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
         fs = get_fs();
         set_fs(KERNEL_DS);
 
-        printk("Code: ");
         for (i = -4; i < 1; i++) {
                 unsigned int val, bad;
 
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
                         bad = __get_user(val, &((u32 *)addr)[i]);
 
                 if (!bad)
-                        printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+                        p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+                                        width, val);
                 else {
-                        printk("bad PC value.");
+                        p += sprintf(p, "bad PC value");
                         break;
                 }
         }
-        printk("\n");
+        printk("%sCode: %s\n", lvl, str);
 
         set_fs(fs);
 }
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
         struct task_struct *tsk = thread->task;
         static int die_counter;
 
-        printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+        printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
                str, err, ++die_counter);
+        sysfs_printk_last_file();
         print_modules();
         __show_regs(regs);
-        printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-                tsk->comm, task_pid_nr(tsk), thread + 1);
+        printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+                TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
         if (!user_mode(regs) || in_interrupt()) {
-                dump_mem("Stack: ", regs->ARM_sp,
+                dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
                          THREAD_SIZE + (unsigned long)task_stack_page(tsk));
                 dump_backtrace(regs, tsk);
-                dump_instr(regs);
+                dump_instr(KERN_EMERG, regs);
         }
 }
 
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
         oops_enter();
 
-        console_verbose();
         spin_lock_irq(&die_lock);
+        console_verbose();
         bust_spinlocks(1);
         __die(str, err, thread, regs);
         bust_spinlocks(0);
         add_taint(TAINT_DIE);
         spin_unlock_irq(&die_lock);
+        oops_exit();
 
         if (in_interrupt())
                 panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
         if (panic_on_oops)
                 panic("Fatal exception");
 
-        oops_exit();
         do_exit(SIGSEGV);
 }
 
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
         if (user_debug & UDBG_UNDEFINED) {
                 printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
                         current->comm, task_pid_nr(current), pc);
-                dump_instr(regs);
+                dump_instr(KERN_INFO, regs);
         }
 #endif
 
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
         if (user_debug & UDBG_SYSCALL) {
                 printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
                         task_pid_nr(current), current->comm, n);
-                dump_instr(regs);
+                dump_instr(KERN_ERR, regs);
         }
 #endif
 
@@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
         if (user_debug & UDBG_SYSCALL) {
                 printk("[%d] %s: arm syscall %d\n",
                        task_pid_nr(current), current->comm, no);
-                dump_instr(regs);
+                dump_instr("", regs);
                 if (user_mode(regs)) {
                         __show_regs(regs);
                         c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
         if (user_debug & UDBG_BADABORT) {
                 printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
                         task_pid_nr(current), current->comm, code, instr);
-                dump_instr(regs);
+                dump_instr(KERN_ERR, regs);
                 show_pte(current->mm, addr);
         }
 #endif
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d581cff80c4c..332b784050b2 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9g45_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 4b4f69251b31..e590bbe0a7b4 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
         .handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
         return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
         return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index cdbf93c694a6..38b37060d426 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -29,7 +29,7 @@ static inline void arch_idle(void)
         cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
         printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c682a64..9167c3d2a5ed 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
         bool "0x00000000 - SDCE3/SyncBoot"
         help
           Select this option if you want support for EP93xx boards with the
-          first SDRAM bank at 0x00000000
+          first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
         bool "0xc0000000 - SDCEO"
         help
           Select this option if you want support for EP93xx boards with the
-          first SDRAM bank at 0xc0000000
+          first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+        bool "0xd0000000 - SDCE1"
+        help
+          Select this option if you want support for EP93xx boards with the
+          first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+        bool "0xe0000000 - SDCE2"
+        help
+          Select this option if you want support for EP93xx boards with the
+          first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+        bool "0xf0000000 - SDCE3/AsyncBoot"
+        help
+          Select this option if you want support for EP93xx boards with the
+          first SDRAM bank at 0xf0000000.
 
 endchoice
 
@@ -112,28 +130,36 @@ config MACH_MICRO9
         bool
 
 config MACH_MICRO9H
-        bool "Support Contec Hypercontrol Micro9-H"
+        bool "Support Contec Micro9-High"
         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
         select MACH_MICRO9
         help
           Say 'Y' here if you want your kernel to support the
-          Contec Hypercontrol Micro9-H board.
+          Contec Micro9-High board.
 
 config MACH_MICRO9M
-        bool "Support Contec Hypercontrol Micro9-M"
-        depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+        bool "Support Contec Micro9-Mid"
+        depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
         select MACH_MICRO9
         help
           Say 'Y' here if you want your kernel to support the
-          Contec Hypercontrol Micro9-M board.
+          Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-        bool "Support Contec Hypercontrol Micro9-L"
+        bool "Support Contec Micro9-Lite"
         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
         select MACH_MICRO9
         help
           Say 'Y' here if you want your kernel to support the
-          Contec Hypercontrol Micro9-L board.
+          Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+        bool "Support Contec Micro9-Slim"
+        depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+        select MACH_MICRO9
+        help
+          Say 'Y' here if you want your kernel to support the
+          Contec Micro9-Slim board.
 
 config MACH_TS72XX
         bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a8f12a..0ad33f15c622 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)          := 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)          := 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)          := 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)          := 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)          := 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)          := 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)    := 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)    := 0xf0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index dda19cd76194..1d0f9d8aff2e 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+        struct clk      *parent;
         unsigned long   rate;
         int             users;
         int             sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+        .rate           = EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+        .parent         = &clk_xtali,
         .sw_locked      = 1,
         .enable_reg     = EP93XX_SYSCON_DEVCFG,
         .enable_mask    = EP93XX_SYSCON_DEVCFG_U1EN,
         .get_rate       = get_uart_rate,
 };
 static struct clk clk_uart2 = {
+        .parent         = &clk_xtali,
         .sw_locked      = 1,
         .enable_reg     = EP93XX_SYSCON_DEVCFG,
         .enable_mask    = EP93XX_SYSCON_DEVCFG_U2EN,
         .get_rate       = get_uart_rate,
 };
 static struct clk clk_uart3 = {
+        .parent         = &clk_xtali,
         .sw_locked      = 1,
         .enable_reg     = EP93XX_SYSCON_DEVCFG,
         .enable_mask    = EP93XX_SYSCON_DEVCFG_U3EN,
         .get_rate       = get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+        .parent         = &clk_xtali,
+};
+static struct clk clk_f = {
+        .parent         = &clk_pll1,
+};
+static struct clk clk_h = {
+        .parent         = &clk_pll1,
+};
+static struct clk clk_p = {
+        .parent         = &clk_pll1,
+};
+static struct clk clk_pll2 = {
+        .parent         = &clk_xtali,
+};
 static struct clk clk_usb_host = {
+        .parent         = &clk_pll2,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+        .parent         = &clk_xtali,
         .sw_locked      = 1,
         .enable_reg     = EP93XX_SYSCON_KEYTCHCLKDIV,
         .enable_mask    = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
         .set_rate       = set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+        .parent         = &clk_xtali,
         .rate           = EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+        .parent         = &clk_h,
         .enable_reg     = EP93XX_SYSCON_PWRCNT,
         .enable_mask    = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
         { .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+        INIT_CK(NULL,                   "xtali",        &clk_xtali),
         INIT_CK("apb:uart1",            NULL,           &clk_uart1),
         INIT_CK("apb:uart2",            NULL,           &clk_uart2),
         INIT_CK("apb:uart3",            NULL,           &clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
         INIT_CK(NULL,                   "m2m1",         &clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+        if (!clk->users++) {
+                if (clk->parent)
+                        __clk_enable(clk->parent);
+
+                if (clk->enable_reg) {
+                        u32 v;
+
+                        v = __raw_readl(clk->enable_reg);
+                        v |= clk->enable_mask;
+                        if (clk->sw_locked)
+                                ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+                        else
+                                __raw_writel(v, clk->enable_reg);
+                }
+        }
+}
 
 int clk_enable(struct clk *clk)
 {
-        if (!clk->users++ && clk->enable_reg) {
-                u32 value;
+        unsigned long flags;
 
-                value = __raw_readl(clk->enable_reg);
-                value |= clk->enable_mask;
-                if (clk->sw_locked)
-                        ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-                else
-                        __raw_writel(value, clk->enable_reg);
-        }
+        if (!clk)
+                return -EINVAL;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        __clk_enable(clk);
+        spin_unlock_irqrestore(&clk_lock, flags);
 
         return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
-        if (!--clk->users && clk->enable_reg) {
-                u32 value;
+        if (!--clk->users) {
+                if (clk->enable_reg) {
+                        u32 v;
+
+                        v = __raw_readl(clk->enable_reg);
+                        v &= ~clk->enable_mask;
+                        if (clk->sw_locked)
+                                ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+                        else
+                                __raw_writel(v, clk->enable_reg);
+                }
 
-                value = __raw_readl(clk->enable_reg);
-                value &= ~clk->enable_mask;
-                if (clk->sw_locked)
-                        ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-                else
-                        __raw_writel(value, clk->enable_reg);
+                if (clk->parent)
+                        __clk_disable(clk->parent);
         }
 }
+
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+
+        if (!clk)
+                return;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        __clk_disable(clk);
+        spin_unlock_irqrestore(&clk_lock, flags);
+}
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+        unsigned long rate = clk_get_rate(clk->parent);
         u32 value;
 
         value = __raw_readl(EP93XX_SYSCON_PWRCNT);
         if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-                return EP93XX_EXT_CLK_RATE;
+                return rate;
         else
-                return EP93XX_EXT_CLK_RATE / 2;
+                return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
         return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-                                  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+                        int *psel, int *esel, int *pdiv, int *div)
 {
-        unsigned long max_rate, best_rate = 0,
-                actual_rate = 0, mclk_rate = 0, rate_err = -1;
+        struct clk *mclk;
+        unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
         int i, found = 0, __div = 0, __pdiv = 0;
 
         /* Don't exceed the maximum rate */
         max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-                       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+                       clk_xtali.rate / 4);
         rate = min(rate, max_rate);
 
         /*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
          */
         for (i = 0; i < 3; i++) {
                 if (i == 0)
-                        mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+                        mclk = &clk_xtali;
                 else if (i == 1)
-                        mclk_rate = clk_pll1.rate * 2;
-                else if (i == 2)
-                        mclk_rate = clk_pll2.rate * 2;
+                        mclk = &clk_pll1;
+                else
+                        mclk = &clk_pll2;
+                mclk_rate = mclk->rate * 2;
 
                 /* Try each predivider value */
                 for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
                                 *div = __div;
                                 *psel = (i == 2);
                                 *esel = (i != 0);
-                                best_rate = actual_rate;
+                                clk->parent = mclk;
+                                clk->rate = actual_rate;
                                 rate_err = abs(actual_rate - rate);
                                 found = 1;
                         }
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
         }
 
         if (!found)
-                return 0;
+                return -EINVAL;
 
-        return best_rate;
+        return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-        unsigned long actual_rate;
-        int psel = 0, esel = 0, pdiv = 0, div = 0;
+        int err, psel = 0, esel = 0, pdiv = 0, div = 0;
         u32 val;
 
-        actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-        if (actual_rate == 0)
-                return -EINVAL;
-        clk->rate = actual_rate;
+        err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+        if (err)
+                return err;
 
         /* Clear the esel, psel, pdiv and div bits */
         val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
         unsigned long long rate;
         int i;
 
-        rate = EP93XX_EXT_CLK_RATE;
+        rate = clk_xtali.rate;
         rate *= ((config_word >> 11) & 0x1f) + 1;               /* X1FBD */
         rate *= ((config_word >> 5) & 0x3f) + 1;                /* X2FBD */
         do_div(rate, (config_word & 0x1f) + 1);                 /* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
         value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
         if (!(value & 0x00800000)) {                    /* PLL1 bypassed?  */
-                clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+                clk_pll1.rate = clk_xtali.rate;
         } else {
                 clk_pll1.rate = calc_pll_rate(value);
         }
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
         value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
         if (!(value & 0x00080000)) {                    /* PLL2 bypassed?  */
-                clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+                clk_pll2.rate = clk_xtali.rate;
         } else if (value & 0x00040000) {                /* PLL2 enabled?  */
                 clk_pll2.rate = calc_pll_rate(value);
         } else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f7ebed942f66..b4357c388d2e 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
         for (i = 0; i < 8; i++) {
                 if (status & (1 << i)) {
                         int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-                        desc = irq_desc + gpio_irq;
                         generic_handle_irq(gpio_irq);
                 }
         }
@@ -550,13 +549,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
         platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-        .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
-        .sda_is_open_drain      = 0,
-        .scl_pin                = EP93XX_GPIO_LINE_EECLK,
-        .scl_is_open_drain      = 0,
-        .udelay                 = 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
         .name                   = "i2c-gpio",
@@ -564,8 +561,25 @@ static struct platform_device ep93xx_i2c_device = {
         .dev.platform_data      = &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+                                struct i2c_board_info *devices, int num)
 {
+        /*
+         * Set the EEPROM interface pin drive type control.
+         * Defines the driver type for the EECLK and EEDAT pins as either
+         * open drain, which will require an external pull-up, or a normal
+         * CMOS driver.
+         */
+        if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+                pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+        if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+                pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+        __raw_writel((data->sda_is_open_drain << 1) |
+                     (data->scl_is_open_drain << 0),
+                     EP93XX_GPIO_EEDRIVE);
+
+        ep93xx_i2c_data = *data;
         i2c_register_board_info(0, devices, num);
         platform_device_register(&ep93xx_i2c_device);
 }
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 73145ae5d3fa..a4a7be308000 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
         .phy_id         = 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+        .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
+        .sda_is_open_drain      = 0,
+        .scl_pin                = EP93XX_GPIO_LINE_EECLK,
+        .scl_is_open_drain      = 0,
+        .udelay                 = 0,    /* default to 100 kHz */
+        .timeout                = 0,    /* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
         {
                 I2C_BOARD_INFO("isl1208", 0x6f),
         },
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
         {
                 I2C_BOARD_INFO("ds1337", 0x68),
         },
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
         if (machine_is_edb9302a() || machine_is_edb9307a() ||
             machine_is_edb9315a()) {
-                ep93xx_register_i2c(edb93xxa_i2c_data,
-                                ARRAY_SIZE(edb93xxa_i2c_data));
+                ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+                                    edb93xxa_i2c_board_info,
+                                    ARRAY_SIZE(edb93xxa_i2c_board_info));
         } else if (machine_is_edb9307() || machine_is_edb9312() ||
                    machine_is_edb9315()) {
-                ep93xx_register_i2c(edb93xx_i2c_data,
-                                ARRAY_SIZE(edb93xx_i2c_data));
+                ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+                                    edb93xx_i2c_board_info,
+                                    ARRAY_SIZE(edb93xx_i2c_board_info));
         }
 }
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 0fbf87b16338..b1f937eda29c 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE            0xfef00000
 #define EP93XX_AHB_SIZE                 0x00100000
 
+#define EP93XX_AHB_PHYS(x)              (EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)             IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE            0x80800000
 #define EP93XX_APB_VIRT_BASE            0xfed00000
 #define EP93XX_APB_SIZE                 0x00200000
 
+#define EP93XX_APB_PHYS(x)              (EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)             IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE                 EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE       (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE       EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE            EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE            (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE            EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE                 EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE         (EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE         EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE              EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE      EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
 
 #define EP93XX_GPIO_BASE                EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)              (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1         EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2         EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK           EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE        EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS        EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1         EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2         EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK           EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE        EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS        EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1         EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2         EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK           EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE        EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS        EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE             EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE                 EP93XX_APB_IOMEM(0x00080000)
 
@@ -134,13 +125,13 @@
 
 #define EP93XX_IRDA_BASE                EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE          (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE          EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE               EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE          (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE          EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE               EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE          (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE          EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE               EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE          EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
 #define EP93XX_ADC_BASE                 EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE         EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE            (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE            EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE                 EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE            (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE            EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE                 EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE              EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN  (1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
+#define EP93XX_SYSCON_SYSCFG            EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK   (0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT  (28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT      (1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7      (1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6      (1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO      (1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA      (1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK     (1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2      (1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1      (1<<0)
 #define EP93XX_SYSCON_SWLOCK            EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE            EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 0a1498ae899a..c991b149bdf2 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-        if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-                return 64 + gpio;
-
-        return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-        return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio)       \
+        (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq)        ((irq) - gpio_to_irq(0))
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12ea0990..554064e90307 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
 #define PHYS_OFFSET             UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET             UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET             UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET             UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET             UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 01a0f0838e5b..469fd968d517 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -16,7 +17,6 @@ struct ep93xx_eth_data
 
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
@@ -33,7 +33,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+                         struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 0a313e82fb74..d83b80478b09 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-        .phy_id         = 0x1f,
-};
-
-static void __init micro9_init(void)
-{
-        ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-        .width          = 4,
-};
-
-static struct resource micro9h_flash_resource = {
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
+
+static struct resource micro9_flash_resource = {
         .start          = EP93XX_CS1_PHYS_BASE,
         .end            = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
         .flags          = IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
         .name           = "physmap-flash",
         .id             = 0,
         .dev            = {
-                .platform_data  = &micro9h_flash_data,
+                .platform_data  = &micro9_flash_data,
         },
         .num_resources  = 1,
-        .resource       = &micro9h_flash_resource,
+        .resource       = &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+        micro9_flash_data.width = width;
+
+        platform_device_register(&micro9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+        u32 v;
+
+        /* Detect the bus width of the external flash memory */
+        v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+        if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+                return 4; /* 32-bit */
+        else
+                return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
 {
-        platform_device_register(&micro9h_flash);
+        if (machine_is_micro9())
+                __micro9_register_flash(4);
+        else if (machine_is_micro9m() || machine_is_micro9s())
+                __micro9_register_flash(micro9_detect_bootwidth());
 }
 
-static void __init micro9h_init_machine(void)
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+        .phy_id         = 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
         ep93xx_init_devices();
-        micro9_init();
-        micro9h_init();
+        ep93xx_register_eth(&micro9_eth_data, 1);
+        micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-        /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+        /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
         .phys_io        = EP93XX_APB_PHYS_BASE,
         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
-        .init_machine   = micro9h_init_machine,
+        .init_machine   = micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-        ep93xx_init_devices();
-        micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-        /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+        /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
         .phys_io        = EP93XX_APB_PHYS_BASE,
         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-        .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+        .boot_params    = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
-        .init_machine   = micro9m_init_machine,
+        .init_machine   = micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-        ep93xx_init_devices();
-        micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-        /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+        /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
         .phys_io        = EP93XX_APB_PHYS_BASE,
         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
         .timer          = &ep93xx_timer,
-        .init_machine   = micro9l_init_machine,
+        .init_machine   = micro9_init_machine,
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+        /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = micro9_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 901cc205015e..148d25fc636f 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4089951acb47..ff5e33298914 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
         _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
         _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-        _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
-        _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
-        _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+        _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+        _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+        _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
         _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
         _REGISTER_CLOCK(NULL, "csi", csi_clk)
         _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
         _REGISTER_CLOCK(NULL, "ata", ata_clk)
         _REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-        _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+        _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
         _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
         _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
         _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ee65dda584cf..906d59b0a7aa 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
         PC6_PF_I2C2_SCL,
         /* SPI1 */
         PD25_PF_CSPI1_RDY,
-        PD27_PF_CSPI1_SS1,
-        PD28_PF_CSPI1_SS0,
         PD29_PF_CSPI1_SCLK,
         PD30_PF_CSPI1_MISO,
         PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
         }
 };
 
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+        .chipselect = pcm038_spi_cs,
+        .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+        {
+                .dev    = &mxc_sdhc_device1.dev,
+                .supply = "sdhc_vcc",
+        },
+};
+
+static struct regulator_init_data sdhc1_data = {
+        .constraints = {
+                .min_uV = 3000000,
+                .max_uV = 3400000,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                        REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                        REGULATOR_MODE_FAST,
+                .always_on = 0,
+                .boot_on = 0,
+        },
+        .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+        .consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+        {
+                .dev    = NULL,
+                .supply = "imx_cam_vcc",
+        },
+};
+
+static struct regulator_init_data cam_data = {
+        .constraints = {
+                .min_uV = 3000000,
+                .max_uV = 3400000,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                        REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                        REGULATOR_MODE_FAST,
+                .always_on = 0,
+                .boot_on = 0,
+        },
+        .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+        .consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+        {
+                .id = MC13783_REGU_VCAM,
+                .init_data = &cam_data,
+        }, {
+                .id = MC13783_REGU_VMMC1,
+                .init_data = &sdhc1_data,
+        },
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+        .regulators = pcm038_regulators,
+        .num_regulators = ARRAY_SIZE(pcm038_regulators),
+        .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+                 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+        {
+                .modalias = "mc13783",
+                .irq = IRQ_GPIOB(23),
+                .max_speed_hz = 300000,
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = &pcm038_pmic,
+                .mode = SPI_CS_HIGH,
+        }
+};
+
 static void __init pcm038_init(void)
 {
         mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
         /* PE18 for user-LED D40 */
         mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
 
+        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+        /* MC13783 IRQ */
+        mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+        mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+        spi_register_board_info(pcm038_spi_board_info,
+                                ARRAY_SIZE(pcm038_spi_board_info));
+
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index c261f59b0b4c..3cb7f457e5d0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
         PB7_PF_SD2_D3,
         PB8_PF_SD2_CMD,
         PB9_PF_SD2_CLK,
-        GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
         /* display */
         PA5_PF_LSCLK,
         PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
                         "PCM970");
 
         mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+        mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
         mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
         platform_device_register(&pcm970_sja1000);
 }
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index eb12de1da42d..63511de3a559 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 92aa4fd19d99..d23ae571c03f 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data nand_board_info = {
-        .width = 1,
-        .hw_ecc = 1,
-};
-
 static void __init mx25pdk_init(void)
 {
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
         mxc_register_device(&mxc_usbh2, NULL);
-        mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 
-
 static void __init mx25pdk_timer_init(void)
 {
         mx25_clocks_init(26000000);
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index fe5c4217322e..c595260ec1f9 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
         _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
         _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-        _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+        _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
         _REGISTER_CLOCK(NULL, "max", max_clk)
         _REGISTER_CLOCK(NULL, "admux", admux_clk)
         _REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 06bd6180bfc3..b2a3bcf8266e 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
         _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
         _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-        _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+        _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
         _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
         _REGISTER_CLOCK(NULL, "epit", epit1_clk)
         _REGISTER_CLOCK(NULL, "epit", epit2_clk)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 8a577f367250..e6abe181b967 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
  * SPI master controller
  * 3 channels
  */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
         {
                .start = CSPI1_BASE_ADDR,
                .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
         },
 };
 
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
         {
                 .start = CSPI2_BASE_ADDR,
                 .end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
         },
 };
 
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
         {
                 .start = CSPI3_BASE_ADDR,
                 .end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
         },
 };
 
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
         .name = "spi_imx",
         .id = 0,
-        .num_resources = ARRAY_SIZE(imx_spi_0_resources),
-        .resource = imx_spi_0_resources,
+        .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+        .resource = mxc_spi_0_resources,
 };
 
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
         .name = "spi_imx",
         .id = 1,
-        .num_resources = ARRAY_SIZE(imx_spi_1_resources),
-        .resource = imx_spi_1_resources,
+        .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+        .resource = mxc_spi_1_resources,
 };
 
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
         .name = "spi_imx",
         .id = 2,
-        .num_resources = ARRAY_SIZE(imx_spi_2_resources),
-        .resource = imx_spi_2_resources,
+        .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+        .resource = mxc_spi_2_resources,
 };
 
 #ifdef CONFIG_ARCH_MX35
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 79f2be45d139..ab87419dc9a0 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index ad5a1122d765..bedf5b8d976a 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
 
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 
 void __init mx31_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 42920f9c1a11..8ad5cc3e83e3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 
 static void __init ams_delta_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+
         iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
         omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
 
         omap_usb_init(&ams_delta_usb_config);
         platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+        omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239da72f..6c8a41f20e51 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
         if (cpu_is_omap15xx()) {
+                /* mux pins for uarts */
+                omap_cfg_reg(UART1_TX);
+                omap_cfg_reg(UART1_RTS);
+                omap_cfg_reg(UART2_TX);
+                omap_cfg_reg(UART2_RTS);
+                omap_cfg_reg(UART3_TX);
+                omap_cfg_reg(UART3_RX);
+
                 omap_usb_init(&generic1510_usb_config);
         }
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cc2abbb2d0f4..cd6c39514826 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
         if (cpu_is_omap1510()) {
+                unsigned char reg;
+
+                /* mux pins for uarts */
+                omap_cfg_reg(UART1_TX);
+                omap_cfg_reg(UART1_RTS);
+                omap_cfg_reg(UART2_TX);
+                omap_cfg_reg(UART2_RTS);
+                omap_cfg_reg(UART3_TX);
+                omap_cfg_reg(UART3_RX);
+
+                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg |= OMAP1510_FPGA_PCR_COM1_EN;
+                fpga_write(reg, OMAP1510_FPGA_POWER);
+                udelay(10);
+
+                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg |= OMAP1510_FPGA_PCR_COM2_EN;
+                fpga_write(reg, OMAP1510_FPGA_POWER);
+                udelay(10);
+
                 platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
                 spi_register_board_info(innovator1510_boardinfo,
                                 ARRAY_SIZE(innovator1510_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 90dd0431b0dc..4de258420f39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
 
 static void __init omap_palmte_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
+
         omap_board_config = palmte_config;
         omap_board_config_size = ARRAY_SIZE(palmte_config);
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8256139891ff..d972cf941b76 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
 
 static void __init omap_palmtt_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
+
         omap_mpu_wdt_mode(0);
 
         omap_board_config = palmtt_config;
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 81b6bde1c5a3..986bd4df0e97 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
 static void __init
 omap_palmz71_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
+
         palmz71_gpio_setup(1);
         omap_mpu_wdt_mode(0);
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 02c85ca2e1df..056ae64e0f55 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
 
 static void __init omap_sx1_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
+
         platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
 
         omap_board_config = sx1_config;
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c06e7a553472..07b07522d5bf 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
+
         /* Watchdog */
         gpio_request(0, "Watchdog");
         /* smc91x reset */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d496e50fec40..d23979bc0fd5 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
         }
 
         for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-                unsigned char reg;
-
                 switch (i) {
                 case 0:
                         uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
                                 if (cpu_is_omap15xx())
                                         clk_set_rate(uart1_ck, 12000000);
                         }
-                        if (cpu_is_omap15xx()) {
-                                omap_cfg_reg(UART1_TX);
-                                omap_cfg_reg(UART1_RTS);
-                                if (machine_is_omap_innovator()) {
-                                        reg = fpga_read(OMAP1510_FPGA_POWER);
-                                        reg |= OMAP1510_FPGA_PCR_COM1_EN;
-                                        fpga_write(reg, OMAP1510_FPGA_POWER);
-                                        udelay(10);
-                                }
-                        }
                         break;
                 case 1:
                         uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
                                 else
                                         clk_set_rate(uart2_ck, 48000000);
                         }
-                        if (cpu_is_omap15xx()) {
-                                omap_cfg_reg(UART2_TX);
-                                omap_cfg_reg(UART2_RTS);
-                                if (machine_is_omap_innovator()) {
-                                        reg = fpga_read(OMAP1510_FPGA_POWER);
-                                        reg |= OMAP1510_FPGA_PCR_COM2_EN;
-                                        fpga_write(reg, OMAP1510_FPGA_POWER);
-                                        udelay(10);
-                                }
-                        }
                         break;
                 case 2:
                         uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
                                 if (cpu_is_omap15xx())
                                         clk_set_rate(uart3_ck, 12000000);
                         }
-                        if (cpu_is_omap15xx()) {
-                                omap_cfg_reg(UART3_TX);
-                                omap_cfg_reg(UART3_RX);
-                        }
                         break;
                 }
                 omap_serial_reset(&serial_platform_data[i]);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 75b1c7efae7e..aad194f61a33 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
         bool "OMAP 3430 SDP board"
         depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N800
+       bool
+
+config MACH_NOKIA_N810
+       bool
+
+config MACH_NOKIA_N810_WIMAX
+       bool
+
 config MACH_NOKIA_N8X0
         bool "Nokia N800/N810"
         depends on ARCH_OMAP2420
+        select MACH_NOKIA_N800
+        select MACH_NOKIA_N810
+        select MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_RX51
         bool "Nokia RX-51 board"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index efaf053eba85..0acb5560229c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
 #include <mach/gpmc.h>
 
 #include <mach/control.h>
-#include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40ea83a..609a5a4a7e29 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
+        omap_board_config = sdp4430_config;
+        omap_board_config_size = ARRAY_SIZE(sdp4430_config);
         omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
         omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
         platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-        omap_board_config = sdp4430_config;
-        omap_board_config_size = ARRAY_SIZE(sdp4430_config);
         omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d110a7fdfbd8..d57ec2f4d0a9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
@@ -41,7 +42,6 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index e4ec0c591216..4c4d7f8dbd72 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
 
 #include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
 #include <mach/usb.h>
 #include <mach/common.h>
 #include <mach/mcspi.h>
-#include <mach/keypad.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f6bf8772af7..5326e0d61597 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -27,6 +27,7 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/leds.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
@@ -39,7 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index b45ad312c587..e34d96a825e3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
-#include <mach/keypad.h>
 #include <mach/onenand.h>
 #include <mach/gpmc-smc91x.h>
 
@@ -38,49 +38,49 @@
 
 static int board_keymap[] = {
         KEY(0, 0, KEY_Q),
-        KEY(0, 1, KEY_W),
-        KEY(0, 2, KEY_E),
-        KEY(0, 3, KEY_R),
-        KEY(0, 4, KEY_T),
-        KEY(0, 5, KEY_Y),
-        KEY(0, 6, KEY_U),
-        KEY(0, 7, KEY_I),
-        KEY(1, 0, KEY_O),
+        KEY(0, 1, KEY_O),
+        KEY(0, 2, KEY_P),
+        KEY(0, 3, KEY_COMMA),
+        KEY(0, 4, KEY_BACKSPACE),
+        KEY(0, 6, KEY_A),
+        KEY(0, 7, KEY_S),
+        KEY(1, 0, KEY_W),
         KEY(1, 1, KEY_D),
-        KEY(1, 2, KEY_DOT),
-        KEY(1, 3, KEY_V),
-        KEY(1, 4, KEY_DOWN),
-        KEY(2, 0, KEY_P),
-        KEY(2, 1, KEY_F),
+        KEY(1, 2, KEY_F),
+        KEY(1, 3, KEY_G),
+        KEY(1, 4, KEY_H),
+        KEY(1, 5, KEY_J),
+        KEY(1, 6, KEY_K),
+        KEY(1, 7, KEY_L),
+        KEY(2, 0, KEY_E),
+        KEY(2, 1, KEY_DOT),
         KEY(2, 2, KEY_UP),
-        KEY(2, 3, KEY_B),
-        KEY(2, 4, KEY_RIGHT),
-        KEY(3, 0, KEY_COMMA),
-        KEY(3, 1, KEY_G),
-        KEY(3, 2, KEY_ENTER),
+        KEY(2, 3, KEY_ENTER),
+        KEY(2, 5, KEY_Z),
+        KEY(2, 6, KEY_X),
+        KEY(2, 7, KEY_C),
+        KEY(3, 0, KEY_R),
+        KEY(3, 1, KEY_V),
+        KEY(3, 2, KEY_B),
         KEY(3, 3, KEY_N),
-        KEY(4, 0, KEY_BACKSPACE),
-        KEY(4, 1, KEY_H),
-        KEY(4, 3, KEY_M),
+        KEY(3, 4, KEY_M),
+        KEY(3, 5, KEY_SPACE),
+        KEY(3, 6, KEY_SPACE),
+        KEY(3, 7, KEY_LEFT),
+        KEY(4, 0, KEY_T),
+        KEY(4, 1, KEY_DOWN),
+        KEY(4, 2, KEY_RIGHT),
         KEY(4, 4, KEY_LEFTCTRL),
-        KEY(5, 1, KEY_J),
-        KEY(5, 2, KEY_Z),
-        KEY(5, 3, KEY_SPACE),
-        KEY(5, 4, KEY_LEFTSHIFT),
-        KEY(6, 0, KEY_A),
-        KEY(6, 1, KEY_K),
-        KEY(6, 2, KEY_X),
-        KEY(6, 3, KEY_SPACE),
-        KEY(6, 4, KEY_FN),
-        KEY(7, 0, KEY_S),
-        KEY(7, 1, KEY_L),
-        KEY(7, 2, KEY_C),
-        KEY(7, 3, KEY_LEFT),
-        KEY(0xff, 0, KEY_F6),
-        KEY(0xff, 1, KEY_F7),
-        KEY(0xff, 2, KEY_F8),
-        KEY(0xff, 4, KEY_F9),
-        KEY(0xff, 5, KEY_F10),
+        KEY(4, 5, KEY_RIGHTALT),
+        KEY(4, 6, KEY_LEFTSHIFT),
+        KEY(5, 0, KEY_Y),
+        KEY(6, 0, KEY_U),
+        KEY(7, 0, KEY_I),
+        KEY(7, 1, KEY_F7),
+        KEY(7, 2, KEY_F8),
+        KEY(0xff, 2, KEY_F9),
+        KEY(0xff, 4, KEY_F10),
+        KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
@@ -444,7 +444,7 @@ static int __init rx51_i2c_init(void)
                 rx51_twldata.vaux3 = &rx51_vaux3_cam;
                 rx51_twldata.vmmc2 = &rx51_vmmc2;
         }
-        omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+        omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
                         ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
         omap_register_i2c_bus(2, 100, NULL, 0);
         omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f9196c3b1a7b..78869a9a1cc2 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index b7b32208ced7..ea00486a5e53 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/regulator/machine.h>
@@ -22,9 +23,9 @@
 
 #include <mach/common.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
 
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
@@ -213,7 +214,8 @@ static void __init omap_zoom2_init_irq(void)
 {
         omap_board_config = zoom2_config;
         omap_board_config_size = ARRAY_SIZE(zoom2_config);
-        omap2_init_common_hw(NULL, NULL);
+        omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+                                 mt46h32m32lf6_sdrc_params);
         omap_init_irq();
         omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index bc5d3ac66611..e2dbedd581e8 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -769,6 +769,7 @@ int __init omap2_clk_init(void)
                 if (c->cpu & cpu_mask) {
                         clkdev_add(&c->lk);
                         clk_register(c->lk.clk);
+                        omap2_init_clk_clkdm(c->lk.clk);
                 }
 
         /* Check the MPU rate set by bootloader */
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fafcd32e6907..489556eecbd1 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define SDRC_MPURATE_LOOPS              96
 
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST          120000000
+
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
@@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void)
 #endif
 }
 
+static void omap3_clk_lock_dpll5(void)
+{
+        struct clk *dpll5_clk;
+        struct clk *dpll5_m2_clk;
+
+        dpll5_clk = clk_get(NULL, "dpll5_ck");
+        clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+        clk_enable(dpll5_clk);
+
+        /* Enable autoidle to allow it to enter low power bypass */
+        omap3_dpll_allow_idle(dpll5_clk);
+
+        /* Program dpll5_m2_clk divider for no division */
+        dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+        clk_enable(dpll5_m2_clk);
+        clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+        clk_disable(dpll5_m2_clk);
+        clk_disable(dpll5_clk);
+        return;
+}
+
 /* REVISIT: Move this init stuff out into clock.c */
 
 /*
@@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void)
          */
         clk_enable_init_clocks();
 
+        /*
+         * Lock DPLL5 and put it in autoidle.
+         */
+        if (omap_rev() >= OMAP3430_REV_ES2_0)
+                omap3_clk_lock_dpll5();
+
         /* Avoid sleeping during omap2_clk_prepare_for_reboot() */
         /* REVISIT: not yet ready for 343x */
 #if 0
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4ef7b4f5474e..58aff8485df9 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -137,6 +137,36 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
         }
 }
 
+/*
+ * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+ * @clkdm: struct clockdomain *
+ * @enable: int 0 to disable, 1 to enable
+ *
+ * Internal helper for actually switching the bit that controls hwsup
+ * idle transitions for clkdm.
+ */
+static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+{
+        u32 v;
+
+        if (cpu_is_omap24xx()) {
+                if (enable)
+                        v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+                else
+                        v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+        } else if (cpu_is_omap34xx()) {
+                if (enable)
+                        v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+                else
+                        v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+        } else {
+                BUG();
+        }
+
+        cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+                            v << __ffs(clkdm->clktrctrl_mask),
+                            clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+}
 
 static struct clockdomain *_clkdm_lookup(const char *name)
 {
@@ -456,8 +486,6 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
  */
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 {
-        u32 v;
-
         if (!clkdm)
                 return;
 
@@ -473,18 +501,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
         if (atomic_read(&clkdm->usecount) > 0)
                 _clkdm_add_autodeps(clkdm);
 
-        if (cpu_is_omap24xx())
-                v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
-        else if (cpu_is_omap34xx())
-                v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
-        else
-                BUG();
-
-
-        cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-                            v << __ffs(clkdm->clktrctrl_mask),
-                            clkdm->pwrdm.ptr->prcm_offs,
-                            CM_CLKSTCTRL);
+        _omap2_clkdm_set_hwsup(clkdm, 1);
 
         pwrdm_clkdm_state_switch(clkdm);
 }
@@ -500,8 +517,6 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
  */
 void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-        u32 v;
-
         if (!clkdm)
                 return;
 
@@ -514,16 +529,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
         pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
                  clkdm->name);
 
-        if (cpu_is_omap24xx())
-                v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
-        else if (cpu_is_omap34xx())
-                v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
-        else
-                BUG();
-
-        cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-                            v << __ffs(clkdm->clktrctrl_mask),
-                            clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+        _omap2_clkdm_set_hwsup(clkdm, 0);
 
         if (atomic_read(&clkdm->usecount) > 0)
                 _clkdm_del_autodeps(clkdm);
@@ -569,10 +575,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
         v = omap2_clkdm_clktrctrl_read(clkdm);
 
         if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-            (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+            (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+                /* Disable HW transitions when we are changing deps */
+                _omap2_clkdm_set_hwsup(clkdm, 0);
                 _clkdm_add_autodeps(clkdm);
-        else
+                _omap2_clkdm_set_hwsup(clkdm, 1);
+        } else {
                 omap2_clkdm_wakeup(clkdm);
+        }
 
         pwrdm_wait_transition(clkdm->pwrdm.ptr);
         pwrdm_clkdm_state_switch(clkdm);
@@ -623,10 +633,14 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
         v = omap2_clkdm_clktrctrl_read(clkdm);
 
         if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-            (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+            (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+                /* Disable HW transitions when we are changing deps */
+                _omap2_clkdm_set_hwsup(clkdm, 0);
                 _clkdm_del_autodeps(clkdm);
-        else
+                _omap2_clkdm_set_hwsup(clkdm, 1);
+        } else {
                 omap2_clkdm_sleep(clkdm);
+        }
 
         pwrdm_clkdm_state_switch(clkdm);
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e3a3bad1d84f..56be87d13edb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
         pwrdm_init(powerdomains_omap);
         clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
         omap2_clk_init();
+#endif
         omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
         omap_hwmod_late_init();
         omap_pm_if_init();
         omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1b4c1600f8d8..2fc4d6abbd0a 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
                 printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
                 return -ENODEV;
         }
-                
+
         d = debugfs_create_dir("pm_debug", NULL);
         if (IS_ERR(d))
                 return PTR_ERR(d);
@@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
         (void) debugfs_create_file("time", S_IRUGO,
                 d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
 
-        pwrdm_for_each(pwrdms_setup, (void *)d);
+        pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
 
         pm_dbg_dir = debugfs_create_dir("registers", d);
         if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ff5a6c53aa0..89463190923a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state);
 
 static struct powerdomain *mpu_pwrdm;
 
-/* PRCM Interrupt Handler for wakeups */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+/*
+ * PRCM Interrupt Handler Helper Function
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+static int prcm_clear_mod_irqs(s16 module, u8 regs)
 {
-        u32 wkst, irqstatus_mpu;
-        u32 fclk, iclk;
-
-        /* WKUP */
-        wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+        u32 wkst, fclk, iclk, clken;
+        u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+        u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+        u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+        u16 grpsel_off = (regs == 3) ?
+                OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+        int c = 0;
+
+        wkst = prm_read_mod_reg(module, wkst_off);
+        wkst &= prm_read_mod_reg(module, grpsel_off);
         if (wkst) {
-                iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
-                fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
-                cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
-                cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
-                prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
-                while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
-                        cpu_relax();
-                cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
-                cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+                iclk = cm_read_mod_reg(module, iclk_off);
+                fclk = cm_read_mod_reg(module, fclk_off);
+                while (wkst) {
+                        clken = wkst;
+                        cm_set_mod_reg_bits(clken, module, iclk_off);
+                        /*
+                         * For USBHOST, we don't know whether HOST1 or
+                         * HOST2 woke us up, so enable both f-clocks
+                         */
+                        if (module == OMAP3430ES2_USBHOST_MOD)
+                                clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+                        cm_set_mod_reg_bits(clken, module, fclk_off);
+                        prm_write_mod_reg(wkst, module, wkst_off);
+                        wkst = prm_read_mod_reg(module, wkst_off);
+                        c++;
+                }
+                cm_write_mod_reg(iclk, module, iclk_off);
+                cm_write_mod_reg(fclk, module, fclk_off);
         }
 
-        /* CORE */
-        wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
-        if (wkst) {
-                iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
-                fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-                cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
-                cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
-                prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
-                while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
-                        cpu_relax();
-                cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
-                cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
-        }
-        wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
-        if (wkst) {
-                iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
-                fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-                cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
-                cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-                prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
-                while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
-                        cpu_relax();
-                cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
-                cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-        }
+        return c;
+}
 
-        /* PER */
-        wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
-        if (wkst) {
-                iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
-                fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
-                cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
-                cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
-                prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
-                while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
-                        cpu_relax();
-                cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
-                cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
-        }
+static int _prcm_int_handle_wakeup(void)
+{
+        int c;
 
+        c = prcm_clear_mod_irqs(WKUP_MOD, 1);
+        c += prcm_clear_mod_irqs(CORE_MOD, 1);
+        c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
         if (omap_rev() > OMAP3430_REV_ES1_0) {
-                /* USBHOST */
-                wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
-                if (wkst) {
-                        iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-                                               CM_ICLKEN);
-                        fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-                                               CM_FCLKEN);
-                        cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
-                                            CM_ICLKEN);
-                        cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
-                                            CM_FCLKEN);
-                        prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
-                                          PM_WKST);
-                        while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-                                                PM_WKST))
-                                cpu_relax();
-                        cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
-                                         CM_ICLKEN);
-                        cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
-                                         CM_FCLKEN);
-                }
+                c += prcm_clear_mod_irqs(CORE_MOD, 3);
+                c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
         }
 
-        irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-                                         OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-        prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
-                          OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+        return c;
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * The PRM_IRQSTATUS_MPU register indicates if there are any pending
+ * interrupts from the PRCM for the MPU. These bits must be cleared in
+ * order to clear the PRCM interrupt. The PRCM interrupt handler is
+ * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
+ * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
+ * register indicates that a wake-up event is pending for the MPU and
+ * this bit can only be cleared if the all the wake-up events latched
+ * in the various PM_WKST_x registers have been cleared. The interrupt
+ * handler is implemented using a do-while loop so that if a wake-up
+ * event occurred during the processing of the prcm interrupt handler
+ * (setting a bit in the corresponding PM_WKST_x register and thus
+ * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
+ * this would be handled.
+ */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+        u32 irqstatus_mpu;
+        int c = 0;
+
+        do {
+                irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+                                        OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+                if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+                        c = _prcm_int_handle_wakeup();
+
+                        /*
+                         * Is the MPU PRCM interrupt handler racing with the
+                         * IVA2 PRCM interrupt handler ?
+                         */
+                        WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
+                             "but no wakeup sources are marked\n");
+                } else {
+                        /* XXX we need to expand our PRCM interrupt handler */
+                        WARN(1, "prcm: WARNING: PRCM interrupt received, but "
+                             "no code to handle it (%08x)\n", irqstatus_mpu);
+                }
+
+                prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+                                        OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-        while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
-                cpu_relax();
+        } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
 
         return IRQ_HANDLED;
 }
@@ -624,6 +639,17 @@ static void __init prcm_setup_regs(void)
         prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
                           OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+        /* Enable wakeups in PER */
+        prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
+                          OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
+                          OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_PER_MOD, PM_WKEN);
+        /* and allow them to wake up MPU */
+        prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
+                          OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
+                          OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
         /* Don't attach IVA interrupts */
         prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
         prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2594cbff3947..f00289abd30f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
 }
 
 /**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
  * @fn: callback function *
  *
  * Call the supplied function for each registered powerdomain.  The
  * callback function can return anything but 0 to bail out early from
- * the iterator.  The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine.  Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator.  Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
  */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-                        void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+                                void *user)
 {
         struct powerdomain *temp_pwrdm;
-        unsigned long flags;
         int ret = 0;
 
         if (!fn)
                 return -EINVAL;
 
-        read_lock_irqsave(&pwrdm_rwlock, flags);
         list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
                 ret = (*fn)(temp_pwrdm, user);
                 if (ret)
                         break;
         }
+
+        return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+                        void *user)
+{
+        unsigned long flags;
+        int ret;
+
+        read_lock_irqsave(&pwrdm_rwlock, flags);
+        ret = pwrdm_for_each_nolock(fn, user);
         read_unlock_irqrestore(&pwrdm_rwlock, flags);
 
         return ret;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index ae2186892c85..54dfeb5d5667 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
                 .regshift       = 2,
                 .uartclk        = OMAP24XX_BASE_BAUD * 16,
         }, {
-#ifdef CONFIG_ARCH_OMAP4
-                .membase        = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
-                .mapbase        = OMAP_UART4_BASE,
-                .irq            = 70,
-                .flags          = UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-                .uartclk        = OMAP24XX_BASE_BAUD * 16,
-        }, {
-#endif
                 .flags          = 0
         }
 };
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda60e09..102916f1e465 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
 
 #define CM_X300_ETH_PHYS        0x08000010
 
-#define GPIO82_MMC2_IRQ         (82)
-#define GPIO85_MMC2_WP          (85)
+#define GPIO82_MMC_IRQ          (82)
+#define GPIO85_MMC_WP           (85)
 
-#define CM_X300_MMC2_IRQ        IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ         IRQ_GPIO(GPIO82_MMC_IRQ)
 
 #define GPIO95_RTC_CS           (95)
 #define GPIO96_RTC_WR           (96)
@@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+        .detect_delay           = 20,
+        .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
+        .gpio_card_detect       = GPIO82_MMC_IRQ,
+        .gpio_card_ro           = GPIO85_MMC_WP,
+        .gpio_power             = -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
    no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
-                            irq_handler_t cm_x300_detect_int,
-                            void *data)
+static int cm_x300_mci2_init(struct device *dev,
+                             irq_handler_t cm_x300_detect_int,
+        void *data)
 {
         return 0;
 }
 
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
 {
 }
 
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
         .detect_delay           = 20,
         .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
-        .init                   = cm_x300_mci_init,
-        .exit                   = cm_x300_mci_exit,
+        .init                   = cm_x300_mci2_init,
+        .exit                   = cm_x300_mci2_exit,
         .gpio_card_detect       = -1,
         .gpio_card_ro           = -1,
         .gpio_power             = -1,
 };
 
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-        .detect_delay           = 20,
-        .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
-        .gpio_card_detect       = GPIO82_MMC2_IRQ,
-        .gpio_card_ro           = GPIO85_MMC2_WP,
-        .gpio_power             = -1,
-};
-
 static void __init cm_x300_init_mmc(void)
 {
         pxa_set_mci_info(&cm_x300_mci_platform_data);
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 3a8ee2272add..983cc8c20081 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
 
 static pxa_freqs_t pxa27x_freqs[] = {
         {104000, 104000, PXA27x_CCCR(1,  8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-        {156000, 104000, PXA27x_CCCR(1,  8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+        {156000, 104000, PXA27x_CCCR(1,  8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
         {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
         {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
         {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 79141f862728..965480eb4fe6 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
 };
 
 struct smsc911x_platform_config csb726_lan_config = {
-        .irq_type       = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
         .flags          = SMSC911X_USE_32BIT,
         .phy_interface  = PHY_INTERFACE_MODE_MII,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d6038ce82..82ff5733e4dc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
 };
 
 
+static struct gpio_keys_button spitz_gpio_keys[] = {
+        {
+                .type   = EV_PWR,
+                .code   = KEY_SUSPEND,
+                .gpio   = SPITZ_GPIO_ON_KEY,
+                .desc   = "On/Off",
+                .wakeup = 1,
+        },
+        /* Two buttons detecting the lid state */
+        {
+                .type   = EV_SW,
+                .code   = 0,
+                .gpio   = SPITZ_GPIO_SWA,
+                .desc   = "Display Down",
+        },
+        {
+                .type   = EV_SW,
+                .code   = 1,
+                .gpio   = SPITZ_GPIO_SWB,
+                .desc   = "Lid Closed",
+        },
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+        .buttons        = spitz_gpio_keys,
+        .nbuttons       = ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &spitz_gpio_keys_platform_data,
+        },
+};
+
+
 /*
  * Spitz LEDs
  */
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
         &spitzscoop_device,
         &spitzkbd_device,
+        &spitz_gpio_keys_device,
         &spitzled_device,
         &sharpsl_nand_device,
         &sharpsl_rom_device,
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8a5546e6d547..bb7b8198d0c4 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)             += collie.o
 
+obj-$(CONFIG_SA1100_H3100)              += h3600.o
 obj-$(CONFIG_SA1100_H3600)              += h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)            += hackkit.o
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e993140edd88..9264d814cd7a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -122,10 +122,7 @@ config CPU_ARM920T
         select CPU_TLB_V4WBI if MMU
         help
           The ARM920T is licensed to be produced by numerous vendors,
-          and is used in the Maverick EP9312 and the Samsung S3C2410.
-
-          More information on the Maverick EP9312 at
-          <http://linuxdevices.com/products/PD2382866068.html>.
+          and is used in the Cirrus EP93xx and the Samsung S3C2410.
 
           Say Y if you want support for the ARM920T processor.
           Otherwise, say N.
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 8f5c13f4c936..295e25dd6381 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
  *      - the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart                )
 #ifdef HARVARD_CACHE
         bic     r0, r0, #CACHE_LINE_SIZE - 1
-1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D line
+1:
+ USER(  mcr     p15, 0, r0, c7, c10, 1  )       @ clean D line
         add     r0, r0, #CACHE_LINE_SIZE
+2:
         cmp     r0, r1
         blo     1b
 #endif
@@ -143,6 +146,19 @@ ENTRY(v6_coherent_user_range)
         mov     pc, lr
 
 /*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+        mov     r0, r0, lsr #12
+        mov     r0, r0, lsl #12
+        add     r0, r0, #4096
+        b       2b
+ UNWIND(.fnend          )
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
+/*
  *      v6_flush_kern_dcache_page(kaddr)
  *
  *      Ensure that the data held in the page kaddr is written back
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index bda0ec31a4e2..e1bd9759617f 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
  *      - the Icache does not read data from the write buffer
  */
 ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart                )
         dcache_line_size r2, r3
         sub     r3, r2, #1
         bic     r0, r0, r3
-1:      mcr     p15, 0, r0, c7, c11, 1          @ clean D line to the point of unification
+1:
+ USER(  mcr     p15, 0, r0, c7, c11, 1  )       @ clean D line to the point of unification
         dsb
-        mcr     p15, 0, r0, c7, c5, 1           @ invalidate I line
+ USER(  mcr     p15, 0, r0, c7, c5, 1   )       @ invalidate I line
         add     r0, r0, r2
+2:
         cmp     r0, r1
         blo     1b
         mov     r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
         dsb
         isb
         mov     pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+        mov     r0, r0, lsr #12
+        mov     r0, r0, lsl #12
+        add     r0, r0, #4096
+        b       2b
+ UNWIND(.fnend          )
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index bc0099d5ae85..d0d17b6a3703 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
         page = pfn_to_page(pfn);
         mapping = page_mapping(page);
-        if (mapping) {
 #ifndef CONFIG_SMP
-                int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-                if (dirty)
-                        __flush_dcache_page(mapping, page);
+        if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+                __flush_dcache_page(mapping, page);
 #endif
-
+        if (mapping) {
                 if (cache_is_vivt())
                         make_coherent(mapping, vma, addr, pfn);
                 else if (vma->vm_flags & VM_EXEC)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ae0e25f5a70e..10e06801afb3 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
                  * down_read()
                  */
                 might_sleep();
+#ifdef CONFIG_DEBUG_VM
+                if (!user_mode(regs) &&
+                    !search_exception_tables(regs->ARM_pc))
+                        goto no_context;
+#endif
         }
 
         fault = __do_page_fault(mm, addr, fsr, tsk);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 73cae57fa707..30f82fb5918c 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
         if (!PageHighMem(page))
                 return page_address(page);
 
+        debug_kmap_atomic(type);
+
         kmap = kmap_high_get(page);
         if (kmap)
                 return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 877c492f8e10..40940d7ce4ff 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
         /*
          * Convert start_pfn/end_pfn to a struct page pointer.
          */
-        start_pg = pfn_to_page(start_pfn);
+        start_pg = pfn_to_page(start_pfn - 1) + 1;
         end_pg = pfn_to_page(end_pfn);
 
         /*
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index fe581383d3e2..f7d2ec5ee9a1 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -33,6 +33,9 @@ static int irqs[] = {
 #ifdef CONFIG_ARCH_OMAP2
         3,
 #endif
+#ifdef CONFIG_ARCH_BCMRING
+        IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
 };
 
 static void armv6_pmu_stop(void)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fd3154ae69b1..b53125f41293 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -829,10 +829,10 @@ EXPORT_SYMBOL(omap_free_dma);
  *
  * @param arb_rate
  * @param max_fifo_depth
- * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
- *                                                  DMA_THREAD_RESERVE_ONET
- *                                                  DMA_THREAD_RESERVE_TWOT
- *                                                  DMA_THREAD_RESERVE_THREET
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ *                                                 DMA_THREAD_RESERVE_ONET
+ *                                                 DMA_THREAD_RESERVE_TWOT
+ *                                                 DMA_THREAD_RESERVE_THREET
  */
 void
 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
@@ -844,11 +844,14 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
                 return;
         }
 
+        if (max_fifo_depth == 0)
+                max_fifo_depth = 1;
         if (arb_rate == 0)
                 arb_rate = 1;
 
-        reg = (arb_rate & 0xff) << 16;
-        reg |= (0xff & max_fifo_depth);
+        reg = 0xff & max_fifo_depth;
+        reg |= (0x3 & tparams) << 12;
+        reg |= (arb_rate & 0xff) << 16;
 
         dma_write(reg, GCR);
 }
@@ -975,6 +978,14 @@ void omap_stop_dma(int lch)
 {
         u32 l;
 
+        /* Disable all interrupts on the channel */
+        if (cpu_class_is_omap1())
+                dma_write(0, CICR(lch));
+
+        l = dma_read(CCR(lch));
+        l &= ~OMAP_DMA_CCR_EN;
+        dma_write(l, CCR(lch));
+
         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
                 int next_lch, cur_lch = lch;
                 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -992,18 +1003,8 @@ void omap_stop_dma(int lch)
                         next_lch = dma_chan[cur_lch].next_lch;
                         cur_lch = next_lch;
                 } while (next_lch != -1);
-
-                return;
         }
 
-        /* Disable all interrupts on the channel */
-        if (cpu_class_is_omap1())
-                dma_write(0, CICR(lch));
-
-        l = dma_read(CCR(lch));
-        l &= ~OMAP_DMA_CCR_EN;
-        dma_write(l, CCR(lch));
-
         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 EXPORT_SYMBOL(omap_stop_dma);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 11e73d9e8928..f129efb3075e 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -303,32 +303,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2430()               0
 #define cpu_is_omap3430()               0
 
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()              is_omap730()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap850
-#  define cpu_is_omap850()              is_omap850()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()              1
-# endif
-#endif
-#else
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap850
-#  define cpu_is_omap850()              1
-# endif
-#endif
-
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
  */
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef  cpu_is_omap730
+# define cpu_is_omap730()               is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef  cpu_is_omap850
+# define cpu_is_omap850()               is_omap850()
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX)
 # undef  cpu_is_omap310
 # undef  cpu_is_omap1510
@@ -433,3 +422,5 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index d91b9be334ff..3ae52ccc793c 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,7 +10,7 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
 
 struct omap_kp_platform_data {
         int rows;
@@ -37,6 +37,9 @@ struct omap_kp_platform_data {
 
 #define KEY_PERSISTENT          0x00800000
 #define KEYNUM_MASK             0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+                                                KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 6271d8556a40..fa6461423bd0 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name);
 
 int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
                         void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+                        void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4b6012707307..94584f167a82 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
                 nent = 1; /* for the next L1 entry */
         } else {
                 bytes = IOPGD_SIZE;
-                if (*iopgd & IOPGD_SUPER) {
+                if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
                         nent *= 16;
                         /* rewind to the 1st entry */
                         iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 57f7122a0919..dc3fac3dd0ea 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -47,7 +47,7 @@
  *      'va':   mpu virtual address
  *
  *      'c':    contiguous memory area
- *      'd':    dicontiguous memory area
+ *      'd':    discontiguous memory area
  *      'a':    anonymous memory allocation
  *      '()':   optional feature
  *
@@ -363,8 +363,9 @@ void *da_to_va(struct iommu *obj, u32 da)
                 goto out;
         }
         va = area->va;
-        mutex_unlock(&obj->mmap_lock);
 out:
+        mutex_unlock(&obj->mmap_lock);
+
         return va;
 }
 EXPORT_SYMBOL_GPL(da_to_va);
@@ -398,7 +399,7 @@ static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
 {
         /*
          * Actually this is not necessary at all, just exists for
-         * consistency of the code readibility.
+         * consistency of the code readability.
          */
         BUG_ON(!sgt);
 }
@@ -434,7 +435,7 @@ static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
 {
         /*
          * Actually this is not necessary at all, just exists for
-         * consistency of the code readibility
+         * consistency of the code readability
          */
         BUG_ON(!sgt);
 }
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 88ac9768f1c1..e664b912d7bb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -595,7 +595,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
         rx &= 1;
         if (cpu_is_omap2430() || cpu_is_omap34xx()) {
                 w = OMAP_MCBSP_READ(io_base, RCCR);
-                w |= (tx ? RDISABLE : 0);
+                w |= (rx ? RDISABLE : 0);
                 OMAP_MCBSP_WRITE(io_base, RCCR, w);
         }
         w = OMAP_MCBSP_READ(io_base, SPCR1);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 925f64711c37..75d1f26e5b17 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -270,7 +270,8 @@ void * omap_sram_push(void * start, unsigned long size)
         omap_sram_ceil -= size;
         omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
         memcpy((void *)omap_sram_ceil, start, size);
-        flush_icache_range((unsigned long)start, (unsigned long)(start + size));
+        flush_icache_range((unsigned long)omap_sram_ceil,
+                (unsigned long)(omap_sram_ceil + size));
 
         return (void *)omap_sram_ceil;
 }
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 11117a7ba911..4d36b784fb8b 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/clk.h>
diff --git a/arch/blackfin/ADI_BSD.txt b/arch/blackfin/ADI_BSD.txt
new file mode 100644
index 000000000000..501d0b645943
--- /dev/null
+++ b/arch/blackfin/ADI_BSD.txt
@@ -0,0 +1,41 @@
+This BSD-Style License applies to a few files in ./arch/blackfin directory,
+and is included here, so people understand which code they can use outside
+the Linux kernel, in non-GPL based projects.
+
+Using the files released under the "ADI BSD" license, must comply with
+these license terms.
+
+--------------------------------------------------------------------------
+
+Copyright Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+  - Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+  - Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+  - Neither the name of Analog Devices, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+  - The use of this software may or may not infringe the patent rights
+    of one or more patent holders.  This license does not release you
+    from the requirement that you obtain separate licenses from these
+    patent holders to use this software.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 9a01d445eca8..ae6a60f10120 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -47,6 +47,9 @@ config GENERIC_HARDIRQS
 config GENERIC_IRQ_PROBE
         def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+        def_bool y
+
 config GENERIC_GPIO
         def_bool y
 
@@ -229,7 +232,7 @@ endchoice
 
 config SMP
         depends on BF561
-        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
         bool "Symmetric multi-processing support"
         ---help---
           This enables support for systems with more than one CPU,
@@ -613,12 +616,10 @@ comment "Kernel Timer/Scheduler"
 source kernel/Kconfig.hz
 
 config GENERIC_TIME
-        bool "Generic time"
-        default y
+        def_bool y
 
 config GENERIC_CLOCKEVENTS
         bool "Generic clock events"
-        depends on GENERIC_TIME
         default y
 
 choice
@@ -653,6 +654,10 @@ config GPTMR0_CLOCKSOURCE
         depends on GENERIC_CLOCKEVENTS
         depends on !TICKSOURCE_GPTMR0
 
+config ARCH_USES_GETTIMEOFFSET
+        depends on !GENERIC_CLOCKEVENTS
+        def_bool y
+
 source kernel/time/Kconfig
 
 comment "Misc"
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index 88f36d599fe8..d27c6274247d 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ARCH_BLACKFIN_ATOMIC__
 #define __ARCH_BLACKFIN_ATOMIC__
 
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index aef0594e7865..10064f902d20 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -1,29 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin-global.h
- * Based on:
- * Author: *
- * Created:
- * Description:  Global extern defines for blackfin
+ * Global extern defines for blackfin
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_GLOBAL_H_
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index c281c6328276..ed4f8c6db0cd 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
index 425ece64fd5e..abdb2af52902 100644
--- a/arch/blackfin/include/asm/bfin_rotary.h
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -1,6 +1,10 @@
 /*
  * board initialization should put one of these structures into platform_data
  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_ROTARY_H
diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h
index fccbb595464a..5248c133bc68 100644
--- a/arch/blackfin/include/asm/bfin_simple_timer.h
+++ b/arch/blackfin/include/asm/bfin_simple_timer.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _bfin_simple_timer_h_
 #define _bfin_simple_timer_h_
 
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index daffa71576d4..a2ff3fb3568d 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_BITOPS_H
 #define _BLACKFIN_BITOPS_H
 
diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h
index 4d4439583396..eb7c1441d8f9 100644
--- a/arch/blackfin/include/asm/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -1,6 +1,9 @@
 /*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors.
  *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_H_
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 655e49540e41..6f4548a13555 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_BUG_H
 #define _BLACKFIN_BUG_H
 
diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h
index 3e69106a4d37..9558416d578b 100644
--- a/arch/blackfin/include/asm/byteorder.h
+++ b/arch/blackfin/include/asm/byteorder.h
@@ -1,6 +1 @@
-#ifndef _BLACKFIN_BYTEORDER_H
-#define _BLACKFIN_BYTEORDER_H
-
 #include <linux/byteorder/little_endian.h>
-
-#endif                          /* _BLACKFIN_BYTEORDER_H */
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 477050ad5c53..8542bc31f63c 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -1,6 +1,9 @@
 /*
- * include/asm-blackfin/cache.h
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
+
 #ifndef __ARCH_BLACKFIN_CACHE_H
 #define __ARCH_BLACKFIN_CACHE_H
 
@@ -35,10 +38,10 @@
 
 #if defined(CONFIG_SMP) && \
     !defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
 # define __ARCH_SYNC_CORE_ICACHE
 # endif
-# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
 # define __ARCH_SYNC_CORE_DCACHE
 # endif
 #ifndef __ASSEMBLY__
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 7e55549e180f..af03a36c7a4e 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/cacheflush.h
- * Based on:     include/asm-m68knommu/cacheflush.h
- * Author:       LG Soft India
- *               Copyright (C) 2004 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level cache routines adapted from the i386
- *               and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ * Blackfin low-level cache routines
  *
- * Modified:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_CACHEFLUSH_H
diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index 35f841bce57d..8778e0f03730 100644
--- a/arch/blackfin/include/asm/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -1,30 +1,8 @@
- /*
-  * File:        include/asm-blackfin/mach-common/cdef_LPBlackfin.h
-  * Based on:
-  * Author:      unknown
-  *              COPYRIGHT 2005 Analog Devices
-  * Created:     ?
-  * Description:
-  *
-  * Modified:
-  *
-  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2, or (at your option)
-  * any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; see the file COPYING.
-  * If not, write to the Free Software Foundation,
-  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef _CDEF_LPBLACKFIN_H
 #define _CDEF_LPBLACKFIN_H
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
index 793581fc9556..a23415be0de1 100644
--- a/arch/blackfin/include/asm/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
@@ -1,9 +1,14 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                     akbar.hussain@lineo.com
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_CHECKSUM_H
 #define _BFIN_CHECKSUM_H
 
 /*
- * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com
- *
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
  *
diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h
index 033bba92d61c..f80dad5ff257 100644
--- a/arch/blackfin/include/asm/clocks.h
+++ b/arch/blackfin/include/asm/clocks.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-common/clocks.h
- * Based on:     include/asm-blackfin/mach-bf537/bf537.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org>
+ * Common Clock definitions for various kernel files
  *
- * Created:      25Jul07
- * Description:  Common Clock definitions for various kernel files
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_CLOCKS_H
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index f8a664f022b1..5dffaf582a22 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/context.S
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 /*
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index d18d16837a6d..fda96261ed62 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/cplb.h
- * Based on:     include/asm-blackfin/mach-bf537/bf537.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org>
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      2000
- * Description:  Common CPLB definitions for CPLB init
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CPLB_H
diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
index 05b14a631d0c..f315c83a015d 100644
--- a/arch/blackfin/include/asm/cplbinit.h
+++ b/arch/blackfin/include/asm/cplbinit.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/cplbinit.h
- * Based on:
- * Author:
+ * Common CPLB definitions for CPLB init
  *
- * Created:
- * Description:
+ * Copyright 2006-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_CPLBINIT_H__
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index fadfa82f93b2..b191dc662bd8 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/include/asm/cpu.h.
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_CPU_H
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index 6341eebff3dc..25906468622f 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -1,32 +1,10 @@
- /*
-  * File:        include/asm-blackfin/mach-common/def_LPBlackfin.h
-  * Based on:
-  * Author:      unknown
-  *              COPYRIGHT 2005 Analog Devices
-  * Created:     ?
-  * Description:
-  *
-  * Modified:
-  *
-  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2, or (at your option)
-  * any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; see the file COPYING.
-  * If not, write to the Free Software Foundation,
-  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
-
-/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */
+/*
+ * Blackfin core register bit & address definitions
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or GPL-2 (or later).
+ */
 
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index ed6b1f3cccce..7a23d824ac96 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_DMA_MAPPING_H
 #define _BLACKFIN_DMA_MAPPING_H
 
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 96e8208f929a..925e66cb2d49 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -1,9 +1,11 @@
 /*
- * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
- *                              Management Controller Driver.
+ * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
+ *
  * Copyright (C) 2004-2008 Analog Device Inc.
  *
+ * Licensed under the GPL-2
  */
+
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index 53a762b6fcd2..68a910db8864 100644
--- a/arch/blackfin/include/asm/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
@@ -1,27 +1,11 @@
 /*
- * File:         include/asm-blackfin/early_printk.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org
+ * function prototpyes for early printk
  *
- * Created:      14Aug2007
- * Description:  function prototpyes for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later.
  */
 
-
 #ifndef __ASM_EARLY_PRINTK_H__
 #define __ASM_EARLY_PRINTK_H__
 
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index c823e8ebbfa1..8e0764c81eaf 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -1,4 +1,8 @@
-/* Changes made by  LG Soft Oct 2004*/
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef __ASMBFIN_ELF_H
 #define __ASMBFIN_ELF_H
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index 55b808fced71..a6886f6e4819 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_ENTRY_H
 #define __BFIN_ENTRY_H
 
diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h
index 9c4037127857..8727b2b382f1 100644
--- a/arch/blackfin/include/asm/fcntl.h
+++ b/arch/blackfin/include/asm/fcntl.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_FCNTL_H
 #define _BFIN_FCNTL_H
 
diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h
index 32c4d495d847..73fe53e7fd24 100644
--- a/arch/blackfin/include/asm/fixed_code.h
+++ b/arch/blackfin/include/asm/fixed_code.h
@@ -1,5 +1,11 @@
-/* This file defines the fixed addresses where userspace programs can find
-   atomic code sequences.  */
+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef __BFIN_ASM_FIXED_CODE_H__
 #define __BFIN_ASM_FIXED_CODE_H__
diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h
index 733a178d782d..c1314c56dd18 100644
--- a/arch/blackfin/include/asm/flat.h
+++ b/arch/blackfin/include/asm/flat.h
@@ -1,8 +1,9 @@
 /*
- * include/asm-blackfin/flat.h -- uClinux flat-format executables
+ * uClinux flat-format executables
  *
- * Copyright (C) 2003,
+ * Copyright 2003-2009 Analog Devices Inc.
  *
+ * Licensed under the GPL-2
  */
 
 #ifndef __BLACKFIN_FLAT_H__
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index fe139619351f..5b44d05ca53e 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/bfin_gpio.h
- * Based on:
- * Author:       Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ARCH_BLACKFIN_GPIO_H__
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index 0b78b873df51..c078dd78d998 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_HARDIRQ_H
 #define __BFIN_HARDIRQ_H
 
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 37053eca200e..d1f5029189a7 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_IO_H
 #define _BFIN_IO_H
 
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 42a15f5ce0d0..e7c0623f9091 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -1,17 +1,10 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2003 HuTao
+ *                2002 Arcturus Networks Inc. (www.arcturusnetworks.com
+ *                       Ted Ma <mated@sympatico.ca>
  *
- * Changed by HuTao Apr18, 2003
- *
- * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
- * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
- *
- * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
- * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
- * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ * Licensed under the GPL-2
  */
 
 #ifndef _BFIN_IRQ_H_
@@ -19,6 +12,8 @@
 
 #include <linux/irqflags.h>
 
+#include <mach/anomaly.h>
+
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
 #include <mach/irq.h>
 
diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
index 7d9e2d3bbede..7fbe42307b9a 100644
--- a/arch/blackfin/include/asm/irq_handler.h
+++ b/arch/blackfin/include/asm/irq_handler.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _IRQ_HANDLER_H
 #define _IRQ_HANDLER_H
 
diff --git a/arch/blackfin/include/asm/l1layout.h b/arch/blackfin/include/asm/l1layout.h
index 79dbefaa5bef..c87e68647a2b 100644
--- a/arch/blackfin/include/asm/l1layout.h
+++ b/arch/blackfin/include/asm/l1layout.h
@@ -1,6 +1,9 @@
 /*
- * l1layout.h
  * Defines a layout of L1 scratchpad memory that userspace can rely on.
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _L1LAYOUT_H_
diff --git a/arch/blackfin/include/asm/linkage.h b/arch/blackfin/include/asm/linkage.h
index 5a822bb790f7..f7d6d47a048d 100644
--- a/arch/blackfin/include/asm/linkage.h
+++ b/arch/blackfin/include/asm/linkage.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
diff --git a/arch/blackfin/include/asm/mmu.h b/arch/blackfin/include/asm/mmu.h
index dbfd686360e6..26f6b70b11e2 100644
--- a/arch/blackfin/include/asm/mmu.h
+++ b/arch/blackfin/include/asm/mmu.h
@@ -1,8 +1,13 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2002 David McCullough <davidm@snapgear.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
 #ifndef __MMU_H
 #define __MMU_H
 
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
 struct sram_list_struct {
         struct sram_list_struct *next;
         void *addr;
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 040410bb07e1..4a3be376ad5b 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mmu_context.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BLACKFIN_MMU_CONTEXT_H__
diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h
index e3128df139d6..9c1cfffddd9b 100644
--- a/arch/blackfin/include/asm/module.h
+++ b/arch/blackfin/include/asm/module.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _ASM_BFIN_MODULE_H
 #define _ASM_BFIN_MODULE_H
 
diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h
index 5cc641c50834..f726e3a80ad0 100644
--- a/arch/blackfin/include/asm/mutex.h
+++ b/arch/blackfin/include/asm/mutex.h
@@ -4,6 +4,10 @@
  * TODO: implement optimized primitives instead, or leave the generic
  * implementation in place, or pick the atomic_xchg() based generic
  * implementation. (see asm-generic/mutex-xchg.h for details)
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_MUTEX_H
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index afbaafa793f1..3ae8b569edfc 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -1,13 +1,9 @@
-/* linux/include/asm-blackfin/nand.h
- *
- * Copyright (c) 2007 Analog Devices, Inc.
- *      Bryan Wu <bryan.wu@analog.com>
- *
+/*
  * BF5XX - NAND flash controller platfrom_device info
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright 2007-2008 Analog Devices, Inc.
+ *
+ * Licensed under the GPL-2
  */
 
 /* struct bf5xx_nand_platform
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 29dcf75c6112..944a07c6cfd6 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_PAGE_H
 #define _BLACKFIN_PAGE_H
 
diff --git a/arch/blackfin/include/asm/page_offset.h b/arch/blackfin/include/asm/page_offset.h
index cbaff24b4b25..d06a89b89d20 100644
--- a/arch/blackfin/include/asm/page_offset.h
+++ b/arch/blackfin/include/asm/page_offset.h
@@ -1,5 +1,10 @@
-
-/* This handles the memory map.. */
+/*
+ * This handles the memory map
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifdef CONFIG_BLACKFIN
 #define PAGE_OFFSET_RAW         0x00000000
diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index a6f95695731d..d49bb261d9b7 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/include/asm/pda.h
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_BLACKFIN_PDA_H
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
index 783c8f7f8f8c..821c699c2238 100644
--- a/arch/blackfin/include/asm/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_PGTABLE_H
 #define _BLACKFIN_PGTABLE_H
 
@@ -92,6 +98,12 @@ extern unsigned int kobjsize(const void *objp);
 #define VMALLOC_START   0
 #define VMALLOC_END     0xffffffff
 
+/* provide a special get_unmapped_area for framebuffer mmaps of nommu */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+                                          unsigned long, unsigned long,
+                                          unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
 #include <asm-generic/pgtable.h>
 
 #endif                          /* _BLACKFIN_PGTABLE_H */
diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h
index a0556671357b..072d8966c5c3 100644
--- a/arch/blackfin/include/asm/poll.h
+++ b/arch/blackfin/include/asm/poll.h
@@ -1,3 +1,10 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
 #ifndef __BFIN_POLL_H
 #define __BFIN_POLL_H
 
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index 88eb5c07cc24..edd8ef3a3788 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -1,6 +1,9 @@
 /*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors
  *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _PORTMUX_H_
diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h
index 80c9d64eb26c..41bc1875c4d7 100644
--- a/arch/blackfin/include/asm/posix_types.h
+++ b/arch/blackfin/include/asm/posix_types.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ARCH_BFIN_POSIX_TYPES_H
 #define __ARCH_BFIN_POSIX_TYPES_H
 
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index a36ad8dac068..aea880274de7 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_BFIN_PROCESSOR_H
 #define __ASM_BFIN_PROCESSOR_H
 
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index e3f086dc7268..27290c955a7a 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_PTRACE_H
 #define _BFIN_PTRACE_H
 
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index ae4dae1e370b..1f5381fbb4a7 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_SECTIONS_H
 #define _BLACKFIN_SECTIONS_H
 
diff --git a/arch/blackfin/include/asm/segment.h b/arch/blackfin/include/asm/segment.h
index 02cfd09b5a99..f8e1984ffc7e 100644
--- a/arch/blackfin/include/asm/segment.h
+++ b/arch/blackfin/include/asm/segment.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_SEGMENT_H
 #define _BFIN_SEGMENT_H
 
diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h
index ce00b03c2775..ce4081a4d815 100644
--- a/arch/blackfin/include/asm/sigcontext.h
+++ b/arch/blackfin/include/asm/sigcontext.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _ASM_BLACKFIN_SIGCONTEXT_H
 #define _ASM_BLACKFIN_SIGCONTEXT_H
 
diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/asm/siginfo.h
index eca4565cea37..3e81306394e2 100644
--- a/arch/blackfin/include/asm/siginfo.h
+++ b/arch/blackfin/include/asm/siginfo.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_SIGINFO_H
 #define _BFIN_SIGINFO_H
 
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index 118deeeae7c0..6a0fe94b84a6 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/include/asm/smp.h
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                          Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_SMP_H
diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h
index d6ff4b59fcb1..b0c7f0ee4b03 100644
--- a/arch/blackfin/include/asm/spinlock.h
+++ b/arch/blackfin/include/asm/spinlock.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_SPINLOCK_H
 #define __BFIN_SPINLOCK_H
 
diff --git a/arch/blackfin/include/asm/spinlock_types.h b/arch/blackfin/include/asm/spinlock_types.h
index b1e3c4c7b382..be75762c0610 100644
--- a/arch/blackfin/include/asm/spinlock_types.h
+++ b/arch/blackfin/include/asm/spinlock_types.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_SPINLOCK_TYPES_H
 #define __ASM_SPINLOCK_TYPES_H
 
diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/asm/stat.h
index d2b6f11ec231..2e27665c4e91 100644
--- a/arch/blackfin/include/asm/stat.h
+++ b/arch/blackfin/include/asm/stat.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
 #ifndef _BFIN_STAT_H
 #define _BFIN_STAT_H
 
diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h
index 321f4d96e4ae..d7f0ccb418c3 100644
--- a/arch/blackfin/include/asm/string.h
+++ b/arch/blackfin/include/asm/string.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_STRING_H_
 #define _BLACKFIN_STRING_H_
 
diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h
index d442113de515..89de6507ca2b 100644
--- a/arch/blackfin/include/asm/swab.h
+++ b/arch/blackfin/include/asm/swab.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_SWAB_H
 #define _BLACKFIN_SWAB_H
 
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index 85e8f16cf8c2..dde19b1d25f5 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -1,34 +1,8 @@
 /*
- * File:        include/asm/system.h
- * Based on:
- * Author:      Tony Kou (tonyko@lineo.ca)
- *              Copyright (c) 2002 Arcturus Networks Inc.
- *                    (www.arcturusnetworks.com)
- *              Copyright (c) 2003 Metrowerks (www.metrowerks.com)
- *              Copyright (c) 2004 Analog Device Inc.
- * Created:     25Jan2001 - Tony Kou
- * Description: system.h include file
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
  *
- * Modified:     22Sep2006 - Robin Getz
- *                - move include blackfin.h down, so I can get access to
- *                   irq functions in other include files.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BLACKFIN_SYSTEM_H
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2bbfdd950afc..afb3a8626380 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -1,27 +1,7 @@
 /*
- * File:         include/asm-blackfin/thread_info.h
- * Based on:     include/asm-m68knommu/thread_info.h
- * Author:       LG Soft India
- *               Copyright (C) 2004-2005 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level thread information
- * Modified:
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_THREAD_INFO_H
diff --git a/arch/blackfin/include/asm/tlb.h b/arch/blackfin/include/asm/tlb.h
index 89a12ee916d8..a74ae08af1a7 100644
--- a/arch/blackfin/include/asm/tlb.h
+++ b/arch/blackfin/include/asm/tlb.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_TLB_H
 #define _BLACKFIN_TLB_H
 
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index 312b596b9731..609ad3c84189 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -1,6 +1,9 @@
 /*
- * Common header file for blackfin family of processors.
+ * header file for hardware trace functions
  *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_TRACE_
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
index 3cdc454cde23..9fe0da612c09 100644
--- a/arch/blackfin/include/asm/traps.h
+++ b/arch/blackfin/include/asm/traps.h
@@ -1,13 +1,10 @@
 /*
- *  linux/include/asm/traps.h
+ *  Copyright 2004-2009 Analog Devices Inc.
+ *                 2001 Lineo, Inc
+ *                        Tony Kou
+ *                 1993 Hamish Macdonald
  *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- *  Lineo, Inc    Jul 2001    Tony Kou
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
+ * Licensed under the GPL-2
  */
 
 #ifndef _BFIN_TRAPS_H
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 2f469a1f80fb..c03b8532aad3 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -1,4 +1,7 @@
-/* Changes made by Lineo Inc.    May 2001
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  *
  * Based on: include/asm-m68knommu/uaccess.h
  */
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 02b1529dad57..779be02a910a 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_BFIN_UNISTD_H
 #define __ASM_BFIN_UNISTD_H
 /*
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index f05d1b99b0ef..bd32c09b9349 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/asm-offsets.c
- * Based on:
- * Author:
+ * generate definitions needed by assembly language modules
  *
- * Created:
- * Description:  generate definitions needed by assembly language modules.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/stddef.h>
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 384868dedac3..1f170216d2f9 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -2,6 +2,7 @@
  * bfin_dma_5xx.c - Blackfin DMA implementation
  *
  * Copyright 2004-2008 Analog Devices Inc.
+ *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index fc4681c0170e..22705eeff34f 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/bfin_gpio.c
- * Based on:
- * Author:       Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * GPIO Abstraction Layer
  *
- * Created:
- * Description:  GPIO Abstraction Layer
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/delay.h>
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 36193eed9a1f..f7b9cdce8239 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -1,25 +1,11 @@
 /*
  * Blackfin CPLB initialization
  *
- *               Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 8e1e9e9e9632..69e0e530d70f 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -1,22 +1,11 @@
 /*
- *               Blackfin CPLB exception handling.
- *               Copyright 2004-2007 Analog Devices Inc.
+ * Blackfin CPLB exception handling for when MPU in on
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 #include <linux/mm.h>
 
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 5d8ad503f82a..fd9a2f31e686 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -1,24 +1,9 @@
 /*
  * Blackfin CPLB initialization
  *
- *               Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index d9ea46c6e41a..5b88861d6183 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -1,26 +1,14 @@
 /*
- * File:         arch/blackfin/kernel/cplb-nompu-c/cplbmgr.c
  * Based on:     arch/blackfin/kernel/cplb-mpu/cplbmgr.c
  * Author:       Michael McTernan <mmcternan@airvana.com>
  *
- * Created:      01Nov2008
  * Description:  CPLB miss handler.
  *
  * Modified:
  *               Copyright 2008 Airvana Inc.
- *               Copyright 2004-2007 Analog Devices Inc.
+ *               Copyright 2008-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c
index 64d78300dd08..0bdaa517a501 100644
--- a/arch/blackfin/kernel/cplbinfo.c
+++ b/arch/blackfin/kernel/cplbinfo.c
@@ -2,6 +2,7 @@
  * arch/blackfin/kernel/cplbinfo.c - display CPLB status
  *
  * Copyright 2004-2008 Analog Devices Inc.
+ *
  * Licensed under the GPL-2 or later.
  */
 
@@ -111,24 +112,21 @@ static const struct seq_operations cplbinfo_sops = {
         .show  = cplbinfo_show,
 };
 
+#define CPLBINFO_DCPLB_FLAG 0x80000000
+
 static int cplbinfo_open(struct inode *inode, struct file *file)
 {
-        char buf[256], *path, *p;
+        struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
+        char cplb_type;
         unsigned int cpu;
-        char *s_cpu, *s_cplb;
         int ret;
         struct seq_file *m;
         struct cplbinfo_data *cdata;
 
-        path = d_path(&file->f_path, buf, sizeof(buf));
-        if (IS_ERR(path))
-                return PTR_ERR(path);
-        s_cpu = strstr(path, "/cpu");
-        s_cplb = strrchr(path, '/');
-        if (!s_cpu || !s_cplb)
-                return -EINVAL;
+        cpu = (unsigned int)pde->data;
+        cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I';
+        cpu &= ~CPLBINFO_DCPLB_FLAG;
 
-        cpu = simple_strtoul(s_cpu + 4, &p, 10);
         if (!cpu_online(cpu))
                 return -ENODEV;
 
@@ -139,7 +137,7 @@ static int cplbinfo_open(struct inode *inode, struct file *file)
         cdata = m->private;
 
         cdata->pos = 0;
-        cdata->cplb_type = toupper(s_cplb[1]);
+        cdata->cplb_type = cplb_type;
         cplbinfo_seq_init(cdata, cpu);
 
         return 0;
@@ -168,8 +166,10 @@ static int __init cplbinfo_init(void)
                 if (!cpu_dir)
                         return -ENOMEM;
 
-                proc_create("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops);
-                proc_create("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops);
+                proc_create_data("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+                        (void *)cpu);
+                proc_create_data("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+                        (void *)(cpu | CPLBINFO_DCPLB_FLAG));
         }
 
         return 0;
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index 2f62a9f4058a..e74e74d7733f 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/dma-mapping.c
- * Based on:
- * Author:
+ * Dynamic DMA mapping support
  *
- * Created:
- * Description:  Dynamic DMA mapping support.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/types.h>
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 931c78b5ea1f..84ed8375113c 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -1,25 +1,10 @@
 /*
- * File:         arch/blackfin/kernel/early_printk.c
- * Based on:     arch/x86_64/kernel/early_printk.c
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org
+ * allow a console to be used for early printk
+ * derived from arch/x86/kernel/early_printk.c
  *
- * Created:      14Aug2007
- * Description:  allow a console to be used for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 3f8769b7db54..f27dc2292e1b 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/entry.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index 0d2d9e0968c8..0565917f23ba 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -6,7 +6,12 @@
  * These are aligned to 16 bytes, so that we have some space to replace
  * these sequences with something else (e.g. kernel traps if we ever do
  * BF561 SMP).
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/unistd.h>
diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c
index d188b2430536..a88daddbf074 100644
--- a/arch/blackfin/kernel/flat.c
+++ b/arch/blackfin/kernel/flat.c
@@ -1,21 +1,7 @@
 /*
- *  arch/blackfin/kernel/flat.c
+ * Copyright 2007 Analog Devices Inc.
  *
- *  Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Licensed under the GPL-2.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index c26c34de9f3c..118c5b9dedac 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/init_task.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/mm.h>
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 4b5fd36187d9..db9f9c91f11f 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/irqchip.c
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/kernel_stat.h>
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 67fc7a56c865..a6dfa6b71e63 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/module.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #define pr_fmt(fmt) "module %s: " fmt
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index f5b286189647..430ae39456e8 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/kernel/process.c
- * Based on:
- * Author:
+ * Blackfin architecture-dependent process handling
  *
- * Created:
- * Description:  Blackfin architecture-dependent process handling.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 30f4828277ad..0982b5d5af10 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -1,30 +1,8 @@
 /*
- * File:         arch/blackfin/kernel/ptrace.c
- * Based on:     Taken from linux/kernel/ptrace.c
- * Author:       linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * these modifications are Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      1/23/92
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 369535b61ed1..c202a44d1416 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1,9 +1,5 @@
 /*
- * arch/blackfin/kernel/setup.c
- *
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c
index 8b8c7107a162..557e9fef406a 100644
--- a/arch/blackfin/kernel/shadow_console.c
+++ b/arch/blackfin/kernel/shadow_console.c
@@ -4,8 +4,6 @@
  *
  * Copyright 2009 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index dbc3bbf846be..9d90c18fab23 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/signal.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/signal.h>
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index 3da60fb13ce4..afcef129d4e8 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -1,32 +1,10 @@
 /*
- * File:         arch/blackfin/kernel/sys_bfin.c
- * Based on:
- * Author:
+ * contains various random system calls that have a non-standard
+ * calling sequence on the Linux/Blackfin platform.
  *
- * Created:
- * Description:  This file contains various random system calls that
- *               have a non-standard calling sequence on the Linux/bfin
- *               platform.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/spinlock.h>
@@ -91,3 +69,14 @@ asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len)
 {
         return safe_dma_memcpy(dest, src, len);
 }
+
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+#include <linux/fb.h>
+unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
+        unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+        struct fb_info *info = filp->private_data;
+        return (unsigned long)info->screen_base;
+}
+EXPORT_SYMBOL(get_fb_unmapped_area);
+#endif
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index f9715764383e..359cfb1815ca 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -1,13 +1,13 @@
 /*
- * linux/arch/kernel/time-ts.c
- *
  * Based on arm clockevents implementation and old bfin time tick.
  *
- * Copyright(C) 2008, GeoTechnologies, Vitja Makarov
+ * Copyright 2008-2009 Analog Devics Inc.
+ *                2008 GeoTechnologies
+ *                     Vitja Makarov
  *
- * This code is licenced under the GPL version 2. For details see
- * kernel-base/COPYING.
+ * Licensed under the GPL-2
  */
+
 #include <linux/module.h>
 #include <linux/profile.h>
 #include <linux/interrupt.h>
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index adb54aa7d7c8..bd3b53da295e 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -14,6 +14,7 @@
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 
 #include <asm/blackfin.h>
 #include <asm/time.h>
@@ -81,11 +82,11 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *))
 #endif
 }
 
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 /*
  * Should return useconds since last timer tick
  */
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long gettimeoffset(void)
+u32 arch_gettimeoffset(void)
 {
         unsigned long offset;
         unsigned long clocks_per_jiffy;
@@ -184,65 +185,6 @@ void __init time_init(void)
         time_sched_init(timer_interrupt);
 }
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-        unsigned long flags;
-        unsigned long seq;
-        unsigned long usec, sec;
-
-        do {
-                seq = read_seqbegin_irqsave(&xtime_lock, flags);
-                usec = gettimeoffset();
-                sec = xtime.tv_sec;
-                usec += (xtime.tv_nsec / NSEC_PER_USEC);
-        }
-        while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-        while (usec >= USEC_PER_SEC) {
-                usec -= USEC_PER_SEC;
-                sec++;
-        }
-
-        tv->tv_sec = sec;
-        tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-        time_t wtm_sec, sec = tv->tv_sec;
-        long wtm_nsec, nsec = tv->tv_nsec;
-
-        if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-                return -EINVAL;
-
-        write_seqlock_irq(&xtime_lock);
-        /*
-         * This is revolting. We need to set the xtime.tv_usec
-         * correctly. However, the value in this location is
-         * is value at the last tick.
-         * Discover what correction gettimeofday
-         * would have done, and then undo it!
-         */
-        nsec -= (gettimeoffset() * NSEC_PER_USEC);
-
-        wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-        wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-        set_normalized_timespec(&xtime, sec, nsec);
-        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-        ntp_clear();
-
-        write_sequnlock_irq(&xtime_lock);
-        clock_was_set();
-
-        return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 56464cb8edf3..6b7325d634af 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/traps.c
- * Based on:
- * Author:       Hamish Macdonald
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  uses S/W interrupt 15 for the system calls
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/bug.h>
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index ffd90fbbc8f9..10e12539000e 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/kernel/vmlinux.lds.S
- * Based on:     none - original work
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      Tue Sep 21 2004
- * Description:  Master linker script for blackfin architecture
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #define VMLINUX_SYMBOL(_sym_) _##_sym_
diff --git a/arch/blackfin/lib/ashldi3.c b/arch/blackfin/lib/ashldi3.c
index a8c279e9b192..ab69d8768afc 100644
--- a/arch/blackfin/lib/ashldi3.c
+++ b/arch/blackfin/lib/ashldi3.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/ashldi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include "gcclib.h"
diff --git a/arch/blackfin/lib/ashrdi3.c b/arch/blackfin/lib/ashrdi3.c
index a0d3419329ca..b5b351e82e10 100644
--- a/arch/blackfin/lib/ashrdi3.c
+++ b/arch/blackfin/lib/ashrdi3.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/ashrdi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include "gcclib.h"
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
index cd605e7d8518..c62969dc1bbb 100644
--- a/arch/blackfin/lib/checksum.c
+++ b/arch/blackfin/lib/checksum.c
@@ -1,32 +1,12 @@
 /*
- * File:         arch/blackfin/lib/checksum.c
- * Based on:     none - original work
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  An implementation of the TCP/IP protocol suite for the LINUX
- *               operating system.  INET is implemented using the  BSD Socket
- *               interface as the means of communication with the user level.
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * An implementation of the TCP/IP protocol suite for the LINUX operating
+ * system. INET is implemented using the BSD Socket interface as the
+ * means of communication with the user level.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S
index 2ac59c70dd94..f89c5a49c47b 100644
--- a/arch/blackfin/lib/divsi3.S
+++ b/arch/blackfin/lib/divsi3.S
@@ -1,10 +1,9 @@
 /*
- * File:         arch/blackfin/lib/divsi3.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  16 / 32 bit signed division.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ *
+ * 16 / 32 bit signed division.
  *                 Special cases :
  *                      1)  If(numerator == 0)
  *                             return 0
@@ -22,25 +21,6 @@
  *                                   R0 - Quotient    (o)
  *                 Registers Used : R2-R7,P0-P2
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 .global   ___divsi3;
diff --git a/arch/blackfin/lib/gcclib.h b/arch/blackfin/lib/gcclib.h
index 9ccd39a135ee..724f07f14f8d 100644
--- a/arch/blackfin/lib/gcclib.h
+++ b/arch/blackfin/lib/gcclib.h
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/gcclib.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #define BITS_PER_UNIT  8
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index e57bf6fbdf3f..53f1741047e5 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/lshrdi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include "gcclib.h"
diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S
index 5da428134d32..542e40f8775f 100644
--- a/arch/blackfin/lib/memchr.S
+++ b/arch/blackfin/lib/memchr.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memchr.S
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
index 219fa2877c62..ce5b9f1a8267 100644
--- a/arch/blackfin/lib/memcmp.S
+++ b/arch/blackfin/lib/memcmp.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memcmp.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
index e654a18a0754..c31bf22aab19 100644
--- a/arch/blackfin/lib/memcpy.S
+++ b/arch/blackfin/lib/memcpy.S
@@ -1,36 +1,13 @@
 /*
- * File:         arch/blackfin/lib/memcpy.S
- * Based on:
- * Author:
+ * internal version of memcpy(), issued by the compiler to copy blocks of
+ * data around. This is really memmove() - it has to be able to deal with
+ * possible overlaps, because that ambiguity is when the compiler gives up
+ * and calls a function. We have our own, internal version so that we get
+ * something we trust, even if the user has redefined the normal symbol.
  *
- * Created:
- * Description:  internal version of memcpy(), issued by the compiler
- *               to copy blocks of data around.
- *               This is really memmove() - it has to be able to deal with
- *               possible overlaps, because that ambiguity is when the compiler
- *               gives up and calls a function. We have our own, internal version
- *               so that we get something we trust, even if the user has redefined
- *               the normal symbol.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
index 33f8653145b7..80c240acac60 100644
--- a/arch/blackfin/lib/memmove.S
+++ b/arch/blackfin/lib/memmove.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memmove.S
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S
index 8159136a29ea..c30d99b10969 100644
--- a/arch/blackfin/lib/memset.S
+++ b/arch/blackfin/lib/memset.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/memset.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S
index ca1dd3973b39..8b0c7d4052af 100644
--- a/arch/blackfin/lib/modsi3.S
+++ b/arch/blackfin/lib/modsi3.S
@@ -1,36 +1,12 @@
 /*
- * File:         arch/blackfin/lib/modsi3.S
- * Based on:
- * Author:
+ * This program computes 32 bit signed remainder. It calls div32 function
+ * for quotient estimation.
+ *   Registers in:  R0, R1 = Numerator/ Denominator
+ *   Registers out: R0     = Remainder
  *
- * Created:
- * Description:  This program computes 32 bit signed remainder. It calls div32 function
- *               for quotient estimation.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- *               Registers used :
- *               Numerator/ Denominator in  R0, R1
- *                 R0  -  returns remainder.
- *                 R2-R7
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 .global ___modsi3;
diff --git a/arch/blackfin/lib/muldi3.S b/arch/blackfin/lib/muldi3.S
index abde120ee230..953a38a1d1d1 100644
--- a/arch/blackfin/lib/muldi3.S
+++ b/arch/blackfin/lib/muldi3.S
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
 .align 2
 .global ___muldi3;
 .type ___muldi3, STT_FUNC;
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 4685b7aa0080..250f4d4b9436 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -1,30 +1,11 @@
 /*
- * File:         arch/blackfin/lib/outs.S
- * Based on:
- * Author:       Bas Vermeulen <bas@buyways.nl>
+ * Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
  *
- * Created:      Tue Mar 22 15:27:24 CEST 2005
- * Description:  Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ * Copyright 2005-2009 Analog Devices Inc.
+ *                2005 BuyWays BV
+ *                      Bas Vermeulen <bas@buyways.nl>
  *
- * Modified:     Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S
index e383cd3eca5d..99ee8c5de38b 100644
--- a/arch/blackfin/lib/smulsi3_highpart.S
+++ b/arch/blackfin/lib/smulsi3_highpart.S
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
 .align 2
 .global ___smulsi3_highpart;
 .type ___smulsi3_highpart, STT_FUNC;
diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S
index 58fd96d74766..97e904315ec6 100644
--- a/arch/blackfin/lib/udivsi3.S
+++ b/arch/blackfin/lib/udivsi3.S
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/lib/udivsi3.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S
index 4f2b76ee7626..168eba7c64c8 100644
--- a/arch/blackfin/lib/umodsi3.S
+++ b/arch/blackfin/lib/umodsi3.S
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/lib/umodsi3.S
- * Based on:
- * Author:
+ * libgcc1 routines for Blackfin 5xx
  *
- * Created:
- * Description:  libgcc1 routines for Blackfin 5xx
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S
index 67b799351e3e..051824a6ed00 100644
--- a/arch/blackfin/lib/umulsi3_highpart.S
+++ b/arch/blackfin/lib/umulsi3_highpart.S
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
 .align 2
 .global ___umulsi3_highpart;
 .type ___umulsi3_highpart, STT_FUNC;
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 03e4a9941f01..01975c017116 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf518/boards/ezbrd.c
- * Based on:     arch/blackfin/mach-bf527/boards/ezbrd.c
- * Author:       Bryan Wu <cooloney@kernel.org>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -571,19 +549,6 @@ static struct platform_device bf51x_sdh_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
         VRPAIR(VLEV_100, 400000000),
@@ -660,8 +625,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &ezbrd_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init ezbrd_init(void)
diff --git a/arch/blackfin/mach-bf518/dma.c b/arch/blackfin/mach-bf518/dma.c
index 698e88ca5104..78b43605a0b5 100644
--- a/arch/blackfin/mach-bf518/dma.c
+++ b/arch/blackfin/mach-bf518/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf518/dma.c
- * Based on:
- * Author:       Bryan Wu <cooloney@kernel.org>
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h
index 78da1a07ee73..856b330ecf0b 100644
--- a/arch/blackfin/mach-bf518/include/mach/bf518.h
+++ b/arch/blackfin/mach-bf518/include/mach/bf518.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/bf518.h
- * Based on:    include/asm-blackfin/mach-bf527/bf527.h
- * Author:      Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF518
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF518_H__
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index dbade93395eb..970d310021e7 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf518/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 83421d393148..6cfb246aebec 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
index 820c13c4daaa..493020d0a65a 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf512.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _CDEF_BF512_H
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
index dfe492dfe54e..e1d99911025d 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf514.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF514_H
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
index 14df43d4677a..6b364eda4947 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf516.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF516_H
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
index bafb370cfb3c..929b90650bd4 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefbf518.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF518_H
@@ -211,6 +186,47 @@
 #define bfin_read_EMAC_TXC_ABORT()              bfin_read32(EMAC_TXC_ABORT)
 #define bfin_write_EMAC_TXC_ABORT(val)          bfin_write32(EMAC_TXC_ABORT, val)
 
+#define bfin_read_EMAC_PTP_CTL()                bfin_read16(EMAC_PTP_CTL)
+#define bfin_write_EMAC_PTP_CTL(val)            bfin_write16(EMAC_PTP_CTL, val)
+#define bfin_read_EMAC_PTP_IE()                 bfin_read16(EMAC_PTP_IE)
+#define bfin_write_EMAC_PTP_IE(val)             bfin_write16(EMAC_PTP_IE, val)
+#define bfin_read_EMAC_PTP_ISTAT()              bfin_read16(EMAC_PTP_ISTAT)
+#define bfin_write_EMAC_PTP_ISTAT(val)          bfin_write16(EMAC_PTP_ISTAT, val)
+#define bfin_read_EMAC_PTP_FOFF()               bfin_read32(EMAC_PTP_FOFF)
+#define bfin_write_EMAC_PTP_FOFF(val)           bfin_write32(EMAC_PTP_FOFF, val)
+#define bfin_read_EMAC_PTP_FV1()                bfin_read32(EMAC_PTP_FV1)
+#define bfin_write_EMAC_PTP_FV1(val)            bfin_write32(EMAC_PTP_FV1, val)
+#define bfin_read_EMAC_PTP_FV2()                bfin_read32(EMAC_PTP_FV2)
+#define bfin_write_EMAC_PTP_FV2(val)            bfin_write32(EMAC_PTP_FV2, val)
+#define bfin_read_EMAC_PTP_FV3()                bfin_read32(EMAC_PTP_FV3)
+#define bfin_write_EMAC_PTP_FV3(val)            bfin_write32(EMAC_PTP_FV3, val)
+#define bfin_read_EMAC_PTP_ADDEND()             bfin_read32(EMAC_PTP_ADDEND)
+#define bfin_write_EMAC_PTP_ADDEND(val)         bfin_write32(EMAC_PTP_ADDEND, val)
+#define bfin_read_EMAC_PTP_ACCR()               bfin_read32(EMAC_PTP_ACCR)
+#define bfin_write_EMAC_PTP_ACCR(val)           bfin_write32(EMAC_PTP_ACCR, val)
+#define bfin_read_EMAC_PTP_OFFSET()             bfin_read32(EMAC_PTP_OFFSET)
+#define bfin_write_EMAC_PTP_OFFSET(val)         bfin_write32(EMAC_PTP_OFFSET, val)
+#define bfin_read_EMAC_PTP_TIMELO()             bfin_read32(EMAC_PTP_TIMELO)
+#define bfin_write_EMAC_PTP_TIMELO(val)         bfin_write32(EMAC_PTP_TIMELO, val)
+#define bfin_read_EMAC_PTP_TIMEHI()             bfin_read32(EMAC_PTP_TIMEHI)
+#define bfin_write_EMAC_PTP_TIMEHI(val)         bfin_write32(EMAC_PTP_TIMEHI, val)
+#define bfin_read_EMAC_PTP_RXSNAPLO()           bfin_read32(EMAC_PTP_RXSNAPLO)
+#define bfin_read_EMAC_PTP_RXSNAPHI()           bfin_read32(EMAC_PTP_RXSNAPHI)
+#define bfin_read_EMAC_PTP_TXSNAPLO()           bfin_read32(EMAC_PTP_TXSNAPLO)
+#define bfin_read_EMAC_PTP_TXSNAPHI()           bfin_read32(EMAC_PTP_TXSNAPHI)
+#define bfin_read_EMAC_PTP_ALARMLO()            bfin_read32(EMAC_PTP_ALARMLO)
+#define bfin_write_EMAC_PTP_ALARMLO(val)        bfin_write32(EMAC_PTP_ALARMLO, val)
+#define bfin_read_EMAC_PTP_ALARMHI()            bfin_read32(EMAC_PTP_ALARMHI)
+#define bfin_write_EMAC_PTP_ALARMHI(val)        bfin_write32(EMAC_PTP_ALARMHI, val)
+#define bfin_read_EMAC_PTP_ID_OFF()             bfin_read16(EMAC_PTP_ID_OFF)
+#define bfin_write_EMAC_PTP_ID_OFF(val)         bfin_write16(EMAC_PTP_ID_OFF, val)
+#define bfin_read_EMAC_PTP_ID_SNAP()            bfin_read32(EMAC_PTP_ID_SNAP)
+#define bfin_write_EMAC_PTP_ID_SNAP(val)        bfin_write32(EMAC_PTP_ID_SNAP, val)
+#define bfin_read_EMAC_PTP_PPS_STARTHI()        bfin_read32(EMAC_PTP_PPS_STARTHI)
+#define bfin_write_EMAC_PTP_PPS_STARTHI(val)    bfin_write32(EMAC_PTP_PPS_STARTHI, val)
+#define bfin_read_EMAC_PTP_PPS_PERIOD()         bfin_read32(EMAC_PTP_PPS_PERIOD)
+#define bfin_write_EMAC_PTP_PPS_PERIOD(val)     bfin_write32(EMAC_PTP_PPS_PERIOD, val)
+
 /* Removable Storage Interface Registers */
 
 #define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
index ee3d4733369c..1d970df7aee9 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/cdefBF51x_base.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF52X_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h
index a96ca90154dd..9b505bb0cb2d 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF512.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF512.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF512_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 56ee5a7c2007..b5adca23a788 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF514.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF514_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h
index dfc93843517d..7eb18774d727 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF516.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF516_H
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h
index 6e982abf4ede..794cf06eb5ba 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF518.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF518_H
@@ -648,4 +624,32 @@
 
 #define                       RWR  0x1        /* Read Wait Request */
 
+/* Bit masks for EMAC_PTP_CTL */
+
+#define                    PTP_EN  0x1        /* Enable the PTP_TSYNC module */
+#define                        TL  0x2        /* Timestamp lock control */
+#define                      ASEN  0x10       /* Auxiliary snapshot control */
+#define                     PPSEN  0x80       /* Pulse-per-second (PPS) control */
+#define                     CKOEN  0x2000     /* Clock output control */
+
+/* Bit masks for EMAC_PTP_IE */
+
+#define                      ALIE  0x1        /* Alarm interrupt enable */
+#define                     RXEIE  0x2        /* Receive event interrupt enable */
+#define                     RXGIE  0x4        /* Receive general interrupt enable */
+#define                      TXIE  0x8        /* Transmit interrupt enable */
+#define                     RXOVE  0x10       /* Receive overrun error interrupt enable */
+#define                     TXOVE  0x20       /* Transmit overrun error interrupt enable */
+#define                      ASIE  0x40       /* Auxiliary snapshot interrupt enable */
+
+/* Bit masks for EMAC_PTP_ISTAT */
+
+#define                       ALS  0x1        /* Alarm status */
+#define                      RXEL  0x2        /* Receive event interrupt status */
+#define                      RXGL  0x4        /* Receive general interrupt status */
+#define                      TXTL  0x8        /* Transmit snapshot status */
+#define                      RXOV  0x10       /* Receive snapshot overrun status */
+#define                      TXOV  0x20       /* Transmit snapshot overrun status */
+#define                       ASL  0x40       /* Auxiliary snapshot interrupt status */
+
 #endif /* _DEF_BF518_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 1bec8d1c2a73..e06f4112c695 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf518/defBF51x_base.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF51X_H
diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h
index 9757683c3948..bbab2d76499c 100644
--- a/arch/blackfin/mach-bf518/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf518/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf518/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h
index 3ff0f093313d..14e52ec7afa5 100644
--- a/arch/blackfin/mach-bf518/include/mach/irq.h
+++ b/arch/blackfin/mach-bf518/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf518/irq.h
- * based on:    include/asm-blackfin/mach-bf527/irq.h
- * author:      Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
  *
- * created:
- * description:
- *      system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF518_IRQ_H_
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index a0fc77fd3315..e352910f7f99 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf518/ints-priority.c b/arch/blackfin/mach-bf518/ints-priority.c
index 3151fd5501ca..bb05bef34ec0 100644
--- a/arch/blackfin/mach-bf518/ints-priority.c
+++ b/arch/blackfin/mach-bf518/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf518/ints-priority.c
- * Based on:     arch/blackfin/mach-bf527/ints-priority.c
- * Author:       Bryan Wu <cooloney@kernel.org>
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 08a3f01c9886..f1996b13a3da 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
- * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -616,12 +595,6 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-        .name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
         {
@@ -786,6 +759,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                 .irq = IRQ_PF8,
         },
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        {
+                I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+        },
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -821,19 +799,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
         VRPAIR(VLEV_100, 400000000),
@@ -909,10 +874,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
         &bfin_spi0_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-        &bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
@@ -942,8 +903,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
         &cm_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init cm_init(void)
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 68b4c804364c..cad23b15d83c 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf527/boards/ezbrd.c
- * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -611,19 +589,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
         VRPAIR(VLEV_100, 400000000),
@@ -732,8 +697,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &ezbrd_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init ezbrd_init(void)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 2849b09abe99..f09665f74ba0 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf527/boards/ezkit.c
- * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -716,12 +694,6 @@ static struct platform_device bfin_fb_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-        .name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -837,6 +809,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                 .irq = IRQ_PF8,
         },
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        {
+                I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+        },
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -905,19 +882,6 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
         VRPAIR(VLEV_100, 400000000),
@@ -1001,10 +965,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bf52x_t350mcqb_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-        &bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
@@ -1038,8 +998,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &ezkit_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf527/dma.c b/arch/blackfin/mach-bf527/dma.c
index 231877578243..7bc7577d6c4f 100644
--- a/arch/blackfin/mach-bf527/dma.c
+++ b/arch/blackfin/mach-bf527/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf527/dma.c
- * Based on:
- * Author:
+ * This file contains the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index 3832aab11e9a..ff68c8897087 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/bf527.h
- * Based on:    include/asm-blackfin/mach-bf537/bf537.h
- * Author:      Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF527_H__
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index ebd6cebc1fbc..c1d55b878b45 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index ea9cb0fef8bc..e7d6034f268f 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
index 663c2bbdfd91..1079af8c7aef 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefbf522.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF522_H
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index 00377eb59b75..dc3119e9f663 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefbf525.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF525_H
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index fca8db708119..d6579449ee46 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefbf527.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF527_H
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 1fe76d8e0403..7014dde10dd6 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/cdefBF52x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF52X_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
index 0a8cdcdf0b49..cb139a254810 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF522.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF522_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 5cd7576fef76..82abefc1ef6c 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF525.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF525_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index f040f364afa3..570a125df025 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF527.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF527_H
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 68b55d03fedf..f821700716ee 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf527/defBF52x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF52X_H
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
index 06b6eebf0d49..104bff85290d 100644
--- a/arch/blackfin/mach-bf527/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf527/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index 8ea660d8151f..aa6579a64a2f 100644
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf527/irq.h
- * based on:    include/asm-blackfin/mach-bf537/irq.h
- * author:      Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * created:
- * description:
- *      system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF527_IRQ_H_
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index 72b1652be4da..d4518b6f4adf 100644
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c
index f8c8acd73e30..44ca215bf164 100644
--- a/arch/blackfin/mach-bf527/ints-priority.c
+++ b/arch/blackfin/mach-bf527/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich (michael.hennerich@analog.com)
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 6c2b47fe4fe4..43f43a095a99 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -1,32 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf533/H8606.c
- * Based on:     arch/blackfin/mach-bf533/stamp.c
- * Author:       Javier Herrero <jherrero@hvsistemas.es>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2007-2008 HV Sistemas S.L.
+ *                      Javier Herrero <jherrero@hvsistemas.es>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2007
- * Description:  Board Info File for the HV Sistemas H8606 board
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc
- *               Copyright 2007,2008 HV Sistemas S.L.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 8208d67e2c97..b580884848d4 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -1,16 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf533/blackstamp.c
- * Based on:     arch/blackfin/mach-bf533/stamp.c
- * Author:       Benjamin Matthews <bmat@lle.rochester.edu>
- *               Aidan Williams <aidan@nicta.com.au>
+ * Board Info File for the BlackStamp
  *
- * Created:      2008
- * Description:  Board Info File for the BlackStamp
- *
- * Copyright 2005 National ICT Australia (NICTA)
  * Copyright 2004-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ *                2008 Benjamin Matthews <bmat@lle.rochester.edu>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
  * More info about the BlackStamp at:
  *      http://blackfin.uclinux.org/gf/project/blackstamp/
@@ -281,19 +275,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -384,8 +365,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
         &i2c_gpio_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init blackstamp_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 7443b26c80c5..7fc3b860d4ae 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -1,30 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf533/boards/cm_bf533.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -261,19 +241,6 @@ static struct platform_device smsc911x_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
         {
@@ -506,8 +473,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &para_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init cm_bf533_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index fd518e383b79..d4689dcc198e 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/ezkit.c
- * Based on:     Original Work
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:
- *
- * Modified:     Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -33,12 +11,14 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/irq.h>
+#include <linux/i2c.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -56,12 +36,6 @@ static struct platform_device rtc_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-        .name = "bfin-adv7393",
-};
-#endif
-
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -98,54 +72,69 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-static const char *map_probes[] = {
-        "stm_flash",
-        NULL,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions_a[] = {
+        {
+                .name       = "bootloader(nor a)",
+                .size       = 0x40000,
+                .offset     = 0,
+        }, {
+                .name       = "linux kernel(nor a)",
+                .size       = MTDPART_SIZ_FULL,
+                .offset     = MTDPART_OFS_APPEND,
+        },
 };
 
-static struct platdata_mtd_ram stm_pri_data_a = {
-        .mapname    = "Flash A Primary",
-        .map_probes = map_probes,
-        .bankwidth  = 2,
+static struct physmap_flash_data ezkit_flash_data_a = {
+        .width      = 2,
+        .parts      = ezkit_partitions_a,
+        .nr_parts   = ARRAY_SIZE(ezkit_partitions_a),
 };
 
-static struct resource stm_pri_resource_a = {
+static struct resource ezkit_flash_resource_a = {
         .start = 0x20000000,
         .end   = 0x200fffff,
         .flags = IORESOURCE_MEM,
 };
 
-static struct platform_device stm_pri_device_a = {
-        .name          = "mtd-ram",
+static struct platform_device ezkit_flash_device_a = {
+        .name          = "physmap-flash",
         .id            = 0,
         .dev = {
-                .platform_data = &stm_pri_data_a,
+                .platform_data = &ezkit_flash_data_a,
         },
         .num_resources = 1,
-        .resource      = &stm_pri_resource_a,
+        .resource      = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+        {
+                .name   = "file system(nor b)",
+                .size   = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
+        },
 };
 
-static struct platdata_mtd_ram stm_pri_data_b = {
-        .mapname    = "Flash B Primary",
-        .map_probes = map_probes,
-        .bankwidth  = 2,
+static struct physmap_flash_data ezkit_flash_data_b = {
+        .width      = 2,
+        .parts      = ezkit_partitions_b,
+        .nr_parts   = ARRAY_SIZE(ezkit_partitions_b),
 };
 
-static struct resource stm_pri_resource_b = {
+static struct resource ezkit_flash_resource_b = {
         .start = 0x20100000,
         .end   = 0x201fffff,
         .flags = IORESOURCE_MEM,
 };
 
-static struct platform_device stm_pri_device_b = {
-        .name          = "mtd-ram",
+static struct platform_device ezkit_flash_device_b = {
+        .name          = "physmap-flash",
         .id            = 4,
         .dev = {
-                .platform_data = &stm_pri_data_b,
+                .platform_data = &ezkit_flash_data_b,
         },
         .num_resources = 1,
-        .resource      = &stm_pri_resource_b,
+        .resource      = &ezkit_flash_resource_b,
 };
 #endif
 
@@ -400,19 +389,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -460,13 +436,21 @@ static struct platform_device bfin_dpmc = {
         },
 };
 
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        {
+                I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+        },
+#endif
+};
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
         &bfin_dpmc,
 
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-        &stm_pri_device_a,
-        &stm_pri_device_b,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+        &ezkit_flash_device_a,
+        &ezkit_flash_device_b,
 #endif
 
 #if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
@@ -482,10 +466,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &bfin_spi0_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-        &bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
 #endif
@@ -507,8 +487,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
         &i2c_gpio_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init ezkit_init(void)
@@ -516,6 +494,8 @@ static int __init ezkit_init(void)
         printk(KERN_INFO "%s(): registering device resources\n", __func__);
         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+        i2c_register_board_info(0, bfin_i2c_board_info,
+                                ARRAY_SIZE(bfin_i2c_board_info));
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index f19b63378b12..644be5e5ab6f 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -1,34 +1,12 @@
 /*
- * File:         arch/blackfin/mach-bf533/ip0x.c
- * Based on:     arch/blackfin/mach-bf533/bf1.c
- * Based on:     arch/blackfin/mach-bf533/stamp.c
- * Author:       Ivan Danov <idanov@gmail.com>
- *               Modified for IP0X David Rowe
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2007 David Rowe
+ *                2006 Intratrade Ltd.
+ *                     Ivan Danov <idanov@gmail.com>
+ *                2005 National ICT Australia (NICTA)
+ *                     Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2007
- * Description:  Board info file for the IP04/IP08 boards, which
- *               are derived from the BlackfinOne V2.0 boards.
- *
- * Modified:
- *               COpyright 2007 David Rowe
- *               Copyright 2006 Intratrade Ltd.
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -145,7 +123,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
         .ctl_reg = 0x1000,              /* CPOL=0,CPHA=0,Sandisk 1G work */
         .enable_dma = 0,                /* if 1 - block!!! */
         .bits_per_word = 8,
-        .cs_change_per_word = 0,
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 729fd7c26336..82f70efd66e7 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/stamp.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board Info File for the BF533-STAMP
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -95,12 +73,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-        .name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 static struct resource net2272_bfin_resources[] = {
         {
@@ -436,19 +408,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -487,6 +446,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                 .irq = 39,
         },
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        {
+                I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+        },
+#endif
 };
 
 static const unsigned int cclk_vlev_datasheet[] =
@@ -528,10 +492,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &smc91x_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-        &bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
         &net2272_bfin_device,
 #endif
@@ -563,8 +523,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &i2c_gpio_device,
 #endif
 
-        &bfin_gpios_device,
-
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
         &stamp_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 7a443c37fb9f..4a14a46a9a68 100644
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf533/dma.c
- * Based on:
- * Author:
+ * simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
index cf4427cd3f72..e3e05f8f7af9 100644
--- a/arch/blackfin/mach-bf533/include/mach/bf533.h
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/bf533.h
- * Based on:
- * Author:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF533_H__
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 6965b4088c44..9e1f3defb6bc 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 499e897a4f4f..f4bd6df5d968 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index bbc3c8386d48..feb2392c43ea 100644
--- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/cdefBF532.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF532_H
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 7f4633223e6d..02b328eb0e07 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -1,48 +1,10 @@
-/************************************************************************
- *
- * This file is subject to the terms and conditions of the GNU Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Non-GPL License also available as part of VisualDSP++
- * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
- *
- * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
- *
- * This file under source code control, please send bugs or changes to:
- * dsptools.support@analog.com
- *
- ************************************************************************/
 /*
- * File:         include/asm-blackfin/mach-bf533/defBF532.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
+ * System & MMR bit and Address definitions for ADSP-BF532
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
-/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */
 
 #ifndef _DEF_BF532_H
 #define _DEF_BF532_H
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index e45c17077aff..2af19d69a7a7 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf533/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index db1e346cd1aa..c31498be0bbb 100644
--- a/arch/blackfin/mach-bf533/include/mach/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/defBF532.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF533_IRQ_H_
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 2f59ce0b0cb5..075dae1af164 100644
--- a/arch/blackfin/mach-bf533/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index f51994b7a2b9..8f714cf8135b 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/ints-priority.c
- * Based on:
- * Author:       Michael Hennerich
+ * Set up the interrupt priorities
  *
- * Created:      ?
- * Description:  Set up the interrupt priorities
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index 87acb7dd2df3..c85f4d770535 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -297,19 +276,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
         {
@@ -699,8 +665,6 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
         &cm_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init cm_bf537e_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 8219dc3d65bd..ea11aa81340d 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537u.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -298,19 +277,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
         {
@@ -605,8 +571,6 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
         &cm_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init cm_bf537u_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 399f81da7b93..0da927252701 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -1,4 +1,10 @@
 /*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Cambridge Signal Processing
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 10b35b838bac..9ba290466b56 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/stamp.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -302,7 +280,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-        .cs_change_per_word = 0,
         .enable_dma = 0,
         .bits_per_word = 16,
 };
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9db6b40743e0..c46baa5e6d9b 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/stamp.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -121,19 +99,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
         {
@@ -1078,12 +1043,6 @@ static struct platform_device bfin_fb_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-        .name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
 
@@ -1498,6 +1457,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                 .platform_data = (void *)&adp5588_gpio_data,
         },
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        {
+                I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+        },
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1668,10 +1632,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_lq035q1_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-        &bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
         &bfin_uart_device,
 #endif
@@ -1702,8 +1662,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_device_gpiokeys,
 #endif
 
-        &bfin_gpios_device,
-
 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
         &bfin_async_nand_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 61353f7bcb9e..57163b65a4f5 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
- * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -298,19 +277,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
         {
@@ -607,8 +573,6 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
         &cm_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init tcm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
index d23fc0edf2b9..5c8c4ed517bb 100644
--- a/arch/blackfin/mach-bf537/dma.c
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf537/dma.c
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * This file contains the simple DMA Implementation for Blackfin
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index f194a848ae8e..17fab4474669 100644
--- a/arch/blackfin/mach-bf537/include/mach/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/bf537.h
- * Based on:
- * Author:
+ * System MMR Register and memory map for ADSP-BF537
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF537_H__
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index e95d54f9af6c..635c91c526a3 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver header files
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index 9ee8834c8f1a..eab006d260c5 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 5f8b5f845be6..91825c9bd226 100644
--- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/cdefbf534.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF534_H
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
index b8fc949a991f..9363c3990421 100644
--- a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/cdefBF537.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *      System MMR Register Map
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _CDEF_BF537_H
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index a3227f9003ff..cebb14feb1ba 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf537/cdefBF537.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF534_H
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h
index 3d6c83e31b1e..8cb5d5cf0c94 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/defbf537.h
- * based on:
- * author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * created:
- * description:
- *      system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF537_H
diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h
index d77a31e45a30..104bff85290d 100644
--- a/arch/blackfin/mach-bf537/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf537/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf537/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index b2a71d5d4e5f..0defa9457e7f 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf537/irq.h
- * based on:
- * author:
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * created:
- * description:
- *      system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BF537_IRQ_H_
diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index 87285e75e903..da9760329e49 100644
--- a/arch/blackfin/mach-bf537/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index 51c48087e03b..f6500622b35d 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Set up the interrupt priorities
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index f2ac3b0ebf24..14af5c2088d4 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf538/boards/ezkit.c
- * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
  */
 
 #include <linux/device.h>
@@ -237,7 +215,6 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
         .enable_dma = 0,         /* use dma transfer with this chip*/
         .bits_per_word = 8,
-        .cs_change_per_word = 0,
 };
 #endif
 
@@ -506,19 +483,6 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
 
@@ -658,8 +622,6 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
         &bfin_device_gpiokeys,
 #endif
 
-        &bfin_gpios_device,
-
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf538/dma.c b/arch/blackfin/mach-bf538/dma.c
index d6837fbf94ea..5dc022589214 100644
--- a/arch/blackfin/mach-bf538/dma.c
+++ b/arch/blackfin/mach-bf538/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf538/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf538/include/mach/bf538.h b/arch/blackfin/mach-bf538/include/mach/bf538.h
index 9c8abb307908..0cf5bf8dab84 100644
--- a/arch/blackfin/mach-bf538/include/mach/bf538.h
+++ b/arch/blackfin/mach-bf538/include/mach/bf538.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/bf538.h
- * Based on:    include/asm-blackfin/mach-bf537/bf537.h
- * Author:      Michael Hennerich (michael.hennerich@analog.com)
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF538
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF538_H__
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 999f239fe1a6..5c148142f041 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:         include/asm-blackfin/mach-bf538/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver header files
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 5ecee1690957..278e8942eef2 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 1de67515dc9d..401ebd79d0aa 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf538/cdefBF538.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF538_H
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 1c58914a8740..5f6c34dfd08e 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -1,47 +1,9 @@
-/************************************************************************
- *
- * This file is subject to the terms and conditions of the GNU Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Non-GPL License also available as part of VisualDSP++
- * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
- *
- * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
- *
- * This file under source code control, please send bugs or changes to:
- * dsptools.support@analog.com
- *
- ************************************************************************/
 /*
- * File:         include/asm-blackfin/mach-bf538/defBF539.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
+
 /* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF538/9 */
 
 #ifndef _DEF_BF539_H
diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h
index 30f4f723f7cc..295c78a465c2 100644
--- a/arch/blackfin/mach-bf538/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf538/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h
index fdc87fe2c174..a4b7fcbc556b 100644
--- a/arch/blackfin/mach-bf538/include/mach/irq.h
+++ b/arch/blackfin/mach-bf538/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf538/irq.h
- * based on:    include/asm-blackfin/mach-bf537/irq.h
- * author:      Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
  *
- * created:
- * description:
- *      system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BF538_IRQ_H_
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index c8db264e3e4d..6121cf8b5872 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf538/ints-priority.c b/arch/blackfin/mach-bf538/ints-priority.c
index 70d17e550e05..1fa793ced347 100644
--- a/arch/blackfin/mach-bf538/ints-priority.c
+++ b/arch/blackfin/mach-bf538/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf538/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index e565aae11d72..ccdcd6da2e9f 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -1,31 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf548/boards/cm_bf548.c
- * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -380,19 +359,6 @@ static struct platform_device musb_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
         {
@@ -546,13 +512,11 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
         .enable_dma = 0,         /* use dma transfer with this chip*/
         .bits_per_word = 8,
-        .cs_change_per_word = 0,
 };
 #endif
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-        .cs_change_per_word = 0,
         .enable_dma = 0,
         .bits_per_word = 16,
 };
@@ -853,8 +817,6 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &para_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init cm_bf548_init(void)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index c66f3801274f..1a5286bbb3fa 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf548/boards/ezkit.c
- * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -208,7 +186,6 @@ static struct platform_device bfin_rotary_device = {
 #endif
 
 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/input.h>
 #include <linux/spi/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
         .x_axis_offset = 0,
@@ -636,7 +613,6 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
         .enable_dma = 0,         /* use dma transfer with this chip*/
         .bits_per_word = 8,
-        .cs_change_per_word = 0,
 };
 #endif
 
@@ -650,7 +626,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-        .cs_change_per_word = 0,
         .enable_dma = 0,
         .bits_per_word = 16,
 };
@@ -681,7 +656,6 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
         .enable_dma = 0,         /* use dma transfer with this chip*/
         .bits_per_word = 8,
-        .cs_change_per_word = 0,
 };
 #endif
 
@@ -908,19 +882,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 /*
@@ -1028,8 +989,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &bfin_device_gpiokeys,
 #endif
 
-        &bfin_gpios_device,
-
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index d9239bc05dd4..039a6d9d38f3 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf548/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index cd31f72bdd82..7bead5ce0f3b 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -1,30 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/bf548.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  System MMR register and memory map for ADSP-BF548
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF548_H__
diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
index 9c7ca62a45eb..8821efe57fbc 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef BF54X_LQ043_H
 #define BF54X_LQ043_H
 
diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
index 1fb4ec77cc25..49338ae299ab 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_KPAD_H
 #define _BFIN_KPAD_H
 
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 2d1b5fa3cca0..dd44aa75fe72 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 318667b2f036..13302b67857a 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -1,32 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
index 07aefb9ed79b..42f4a9469549 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF542.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF542_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
index 431a69278991..2207799575ff 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF544.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF544_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index 93376e90dfc5..423421515134 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF547.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index 9cd74384136f..df84180410c4 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF548.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index ead360b69dea..34c84c7fb256 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf549/cdefBF549.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF549_H
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 6e636c418cb0..a2e9d9849eba 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/cdefBF54x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF54X_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index b1316541b8d6..d3bc6d1df547 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF542.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF542_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index c2c785bdc5fc..dd414ae4ba4c 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF544.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF544_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 661f0d877bd1..5a9dbabe0a68 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF547.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 85d4bade911d..82cd593f7391 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF548.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF548_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index 096734541644..6fc6e39ab61b 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF549.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF549_H
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index e022e896cb18..8590c8c78336 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/defBF54x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF54X_H
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index 3a2051709787..850e39d193e3 100644
--- a/arch/blackfin/mach-bf548/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -1,34 +1,8 @@
 /*
- * File:         include/asm-blackfin/mach-bf548/gpio.h
- * Based on:
- * Author:       Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
-
-
 #define GPIO_PA0        0
 #define GPIO_PA1        1
 #define GPIO_PA2        2
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index f194625f6821..106db05684ae 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf548/irq.h
- * based on:    include/asm-blackfin/mach-bf537/irq.h
- * author:      Roy Huang (roy.huang@analog.com)
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BF548_IRQ_H_
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index ce372ba0f046..89ad6a886362 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index 9dd0fa3ac4de..48dd3a4bc4a5 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/ints-priority.c
- * Based on:     arch/blackfin/mach-bf533/ints-priority.c
- * Author:       Michael Hennerich
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Licensed under the GPL-2 or later.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Set up the interrupt priorities
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S
index 9439bc6bd01f..0261a5e751b3 100644
--- a/arch/blackfin/mach-bf561/atomic.S
+++ b/arch/blackfin/mach-bf561/atomic.S
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/mach-bf561/atomic.S
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2008 Analog Devices Inc.
+ *              Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6577ecfcf11e..dfc8d5b77986 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -1,30 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf533/boards/cm_bf561.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               2008-2009 Bluetechnix
+ *               2005 National ICT Australia (NICTA)
+ *                    Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2006
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -285,19 +265,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 static struct resource isp1362_hcd_resources[] = {
         {
@@ -532,8 +499,6 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &para_flash_device,
 #endif
-
-        &bfin_gpios_device,
 };
 
 static int __init cm_bf561_init(void)
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index caed96bb957e..9e2d8cfba546 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf561/ezkit.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               2005 National ICT Australia (NICTA)
+ *                    Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -387,19 +366,6 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
-static struct resource bfin_gpios_resources = {
-        .start = 0,
-        .end   = MAX_BLACKFIN_GPIOS - 1,
-        .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-        .name = "simple-gpio",
-        .id = -1,
-        .num_resources = 1,
-        .resource = &bfin_gpios_resources,
-};
-
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -493,8 +459,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &isp1362_hcd_device,
 #endif
 
-        &bfin_gpios_device,
-
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
         &ezkit_flash_device,
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 6f77dbe952f5..8ba7252455e1 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -1,15 +1,13 @@
 /*
- *  File: arch/blackfin/mach-bf561/tepla.c
+ * Copyright 2004-2007 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- *  Copyright 2004-2007 Analog Devices Inc.
- *  Only SMSC91C1111 was registered, may do more later.
+ * Thanks to Jamey Hicks.
  *
- *  Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au>
- *  Thanks to Jamey Hicks.
+ * Only SMSC91C1111 was registered, may do more later.
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
+ * Licensed under the GPL-2
  */
 
 #include <linux/device.h>
diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c
index 42b0037afe61..c938c3c7355d 100644
--- a/arch/blackfin/mach-bf561/dma.c
+++ b/arch/blackfin/mach-bf561/dma.c
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-bf561/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
  *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
+
 #include <linux/module.h>
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
index 9968362a2ee4..9f9a367e6a24 100644
--- a/arch/blackfin/mach-bf561/include/mach/bf561.h
+++ b/arch/blackfin/mach-bf561/include/mach/bf561.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf561/bf561.h
- * Based on:
- * Author:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
  *
- * Created:
- * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __MACH_BF561_H__
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index fd5e8878b8c4..e33e158bc16d 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -1,32 +1,7 @@
 /*
- * file:        include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * created:
- * description:
- *      blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/serial.h>
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index 8be31358ef88..67d6bdcd3fa8 100644
--- a/arch/blackfin/mach-bf561/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf561/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_BLACKFIN_H_
diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index 9d9858c2be68..81ecdb71c6af 100644
--- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -1,31 +1,7 @@
 /*
- * File:         include/asm-blackfin/mach-bf561/cdefBF561.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Created:
- * Description:  C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CDEF_BF561_H
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 5fc0f05026e0..a31e509553fb 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -1,32 +1,7 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf561/defBF561.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _DEF_BF561_H
diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h
index 7882f79e1ade..a651a8cf805f 100644
--- a/arch/blackfin/mach-bf561/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf561/include/mach/gpio.h
@@ -1,7 +1,4 @@
 /*
- * File: arch/blackfin/mach-bf561/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
  * Copyright (C) 2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 6698389c5564..7b208db267bf 100644
--- a/arch/blackfin/mach-bf561/include/mach/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -1,32 +1,7 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf561/irq.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2008 Analog Devices Inc.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BF561_IRQ_H_
diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index 2e5ad6347dea..3a7b46bbe849 100644
--- a/arch/blackfin/mach-bf561/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h
index f9e65ebe81b2..390c7f4ae7b3 100644
--- a/arch/blackfin/mach-bf561/include/mach/smp.h
+++ b/arch/blackfin/mach-bf561/include/mach/smp.h
@@ -1,3 +1,9 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _MACH_BF561_SMP
 #define _MACH_BF561_SMP
 
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 9d2f23344720..b4424172ad9e 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf561/ints-priority.c
- * Based on:     arch/blackfin/mach-bf537/ints-priority.c
- * Author:       Michael Hennerich
+ * Set up the interrupt priorities
  *
- * Created:
- * Description:  Set up the interrupt priorities
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index f72a6af20c4f..8e6050369c06 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -1,26 +1,10 @@
 /*
- * File:         arch/blackfin/mach-bf561/secondary.S
- * Based on:     arch/blackfin/mach-bf561/head.S
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * BF561 coreB bootstrap file
  *
- *               Copyright 2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Philippe Gerum <rpm@xenomai.org>
  *
- * Description:  BF561 coreB bootstrap file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 8c10701c251f..510f57641495 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -1,23 +1,8 @@
 /*
- * File:         arch/blackfin/mach-bf561/smp.c
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/init.h>
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 5998d8632a73..9dbafcdcf479 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-common/arch_checks.c
- * Based on:
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org>
+ * Do some checking to make sure things are OK
  *
- * Created:      25Jul07
- * Description:  Do some checking to make sure things are OK
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <asm/fixed_code.h>
diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c
index 4ebbd78db3a4..a60a24f5035d 100644
--- a/arch/blackfin/mach-common/cache-c.c
+++ b/arch/blackfin/mach-common/cache-c.c
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2009 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index d9666fe6c3d6..ea540318a228 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 85c658083279..01506504e6d0 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-common/cpufreq.c
- * Based on:
- * Author:
+ * Blackfin core clock scaling
  *
- * Created:
- * Description:  Blackfin core clock scaling
+ * Copyright 2008-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA      02110-1301      USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 1e7cac23e25f..94a0375cbdcf 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1,32 +1,11 @@
 /*
- * File:         arch/blackfin/mach-common/entry.S
- * Based on:
- * Author:       Linus Torvalds
+ * Contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
  *
- * Created:      ?
- * Description:  contains the system-call and fault low-level handling routines.
- *               This also contains the timer-interrupt handler, as well as all
- *               interrupts and faults that can result in a task-switch.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 /* NOTE: This code handles signal-recognition, which happens every time
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 9c79dfea2a53..cab0a0031eee 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 82d417ef4b5b..8085ff1cce00 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -1,31 +1,11 @@
 /*
- * File:         arch/blackfin/mach-common/interrupt.S
- * Based on:
- * Author:       D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
- *               Kenneth Albanowski <kjahds@kjahds.com>
- *
- * Created:      ?
- * Description:  Interrupt Entries
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Interrupt Entries
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright 2005-2009 Analog Devices Inc.
+ *               D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
+ *               Kenneth Albanowski <kjahds@kjahds.com>
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <asm/blackfin.h>
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 6ffda78aaf9d..660ea1bec54c 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1,33 +1,14 @@
 /*
- * File:         arch/blackfin/mach-common/ints-priority.c
+ * Set up the interrupt priorities
  *
- * Description:  Set up the interrupt priorities
+ * Copyright  2004-2009 Analog Devices Inc.
+ *                 2003 Bas Vermeulen <bas@buyways.nl>
+ *                 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ *            2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ *                 1999 D. Jeff Dionne <jeff@uclinux.org>
+ *                 1996 Roman Zippel
  *
- * Modified:
- *               1996 Roman Zippel
- *               1999 D. Jeff Dionne <jeff@uclinux.org>
- *               2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- *               2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- *               2003 Metrowerks/Motorola
- *               2003 Bas Vermeulen <bas@buyways.nl>
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
index 883e3241b17e..c6496249e2bc 100644
--- a/arch/blackfin/mach-common/irqpanic.c
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mach-common/irqpanic.c
- * Based on:
- * Author:
+ * panic kernel with dump information
  *
- * Created:      ?
- * Description:  panic kernel with dump information
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * Modified:     rgetz - added cache checking code 14Feb06
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0e3d4ff9d8b6..8837be4edb4a 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -1,35 +1,11 @@
 /*
- * File:         arch/blackfin/mach-common/pm.c
- * Based on:     arm/mach-omap/pm.c
- * Author:       Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
+ * Blackfin power management
  *
- * Created:      2001
- * Description:  Blackfin power management
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Modified:     Nicolas Pitre - PXA250 support
- *                Copyright (c) 2002 Monta Vista Software, Inc.
- *               David Singleton - OMAP1510
- *                Copyright (c) 2002 Monta Vista Software, Inc.
- *               Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
- *                Copyright 2004
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2
+ * based on arm/mach-omap/pm.c
+ *    Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
  */
 
 #include <linux/suspend.h>
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 349ee3f5466a..d98585f3237d 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -1,24 +1,10 @@
 /*
- * File:         arch/blackfin/kernel/smp.c
- * Author:       Philippe Gerum <rpm@xenomai.org>
- * IPI management based on arch/arm/kernel/smp.c.
+ * IPI management based on arch/arm/kernel/smp.c (Copyright 2002 ARM Limited)
  *
- *               Copyright 2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2.
  */
 
 #include <linux/module.h>
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index bc0062884fde..fb0b1599cfb7 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mm/blackfin_sram.h
- * Based on:     arch/blackfin/mm/blackfin_sram.c
- * Author:       Mike Frysinger
+ * Local prototypes meant for internal use only
  *
- * Created:      Aug 2006
- * Description:  Local prototypes meant for internal use only
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BLACKFIN_SRAM_H__
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index b88ce7fda548..bb9c98f9cb5b 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -1,30 +1,7 @@
 /*
- * File:         arch/blackfin/mm/init.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/swap.h>
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index beb1a608824c..84cdc5a1c139 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -1,19 +1,9 @@
 /*
- * Description: Instruction SRAM accessor functions for the Blackfin
+ * Instruction SRAM accessor functions for the Blackfin
  *
  * Copyright 2008 Analog Devices Inc.
  *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later
  */
 
 #define pr_fmt(fmt) "isram: " fmt
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index eb63ab353e5a..f068c11ea98f 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -1,30 +1,9 @@
 /*
- * File:         arch/blackfin/mm/sram-alloc.c
- * Based on:
- * Author:
+ * SRAM allocator for Blackfin on-chip memory
  *
- * Created:
- * Description:  SRAM allocator for Blackfin L1 and L2 memory
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 6b0a2b6fed6a..0974c0ecc594 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -527,7 +527,7 @@ static void do_signal(void)
 
 no_signal:
         /* Did we come from a system call? */
-        if (__frame->syscallno >= 0) {
+        if (__frame->syscallno != -1) {
                 /* Restart the system call - no handlers present */
                 switch (__frame->gr8) {
                 case -ERESTARTNOHAND:
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 1b7598e6f6e8..8a88f1f0a3e2 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -17,6 +17,7 @@
 
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 29dd8489ffec..ecdc19a299b2 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -561,7 +561,7 @@ config HPAPCI
 
 config MVME147_SCC
         bool "SCC support for MVME147 serial ports"
-        depends on MVME147
+        depends on MVME147 && BROKEN
         help
           This is the driver for the serial ports on the Motorola MVME147
           boards.  Everyone using one of these boards should say Y here.
@@ -576,14 +576,14 @@ config SERIAL167
 
 config MVME162_SCC
         bool "SCC support for MVME162 serial ports"
-        depends on MVME16x
+        depends on MVME16x && BROKEN
         help
           This is the driver for the serial ports on the Motorola MVME162 and
           172 boards.  Everyone using one of these boards should say Y here.
 
 config BVME6000_SCC
         bool "SCC support for BVME6000 serial ports"
-        depends on BVME6000
+        depends on BVME6000 && BROKEN
         help
           This is the driver for the serial ports on the BVME4000 and BVME6000
           boards from BVM Ltd.  Everyone using one of these boards should say
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index 594ee0e657fe..9a8876f715d8 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -45,25 +45,25 @@ int main(void)
         DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate));
 
         /* offsets into the pt_regs */
-        DEFINE(PT_D0, offsetof(struct pt_regs, d0));
-        DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
-        DEFINE(PT_D1, offsetof(struct pt_regs, d1));
-        DEFINE(PT_D2, offsetof(struct pt_regs, d2));
-        DEFINE(PT_D3, offsetof(struct pt_regs, d3));
-        DEFINE(PT_D4, offsetof(struct pt_regs, d4));
-        DEFINE(PT_D5, offsetof(struct pt_regs, d5));
-        DEFINE(PT_A0, offsetof(struct pt_regs, a0));
-        DEFINE(PT_A1, offsetof(struct pt_regs, a1));
-        DEFINE(PT_A2, offsetof(struct pt_regs, a2));
-        DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-        DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+        DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+        DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+        DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+        DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+        DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+        DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+        DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+        DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+        DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+        DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+        DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+        DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
 
 #ifdef CONFIG_COLDFIRE
         /* bitfields are a bit difficult */
-        DEFINE(PT_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
+        DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
 #else
         /* bitfields are a bit difficult */
-        DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+        DEFINE(PT_OFF_VECTOR, offsetof(struct pt_regs, pc) + 4);
 #endif
 
         /* signal defines */
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index f56faa5c9cd9..56043ade3941 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -46,7 +46,7 @@
 ENTRY(buserr)
         SAVE_ALL
         moveq   #-1,%d0
-        movel   %d0,%sp@(PT_ORIG_D0)
+        movel   %d0,%sp@(PT_OFF_ORIG_D0)
         movel   %sp,%sp@-               /* stack frame pointer argument */
         jsr     buserr_c
         addql   #4,%sp
@@ -55,7 +55,7 @@ ENTRY(buserr)
 ENTRY(trap)
         SAVE_ALL
         moveq   #-1,%d0
-        movel   %d0,%sp@(PT_ORIG_D0)
+        movel   %d0,%sp@(PT_OFF_ORIG_D0)
         movel   %sp,%sp@-               /* stack frame pointer argument */
         jsr     trap_c
         addql   #4,%sp
@@ -67,7 +67,7 @@ ENTRY(trap)
 ENTRY(dbginterrupt)
         SAVE_ALL
         moveq   #-1,%d0
-        movel   %d0,%sp@(PT_ORIG_D0)
+        movel   %d0,%sp@(PT_OFF_ORIG_D0)
         movel   %sp,%sp@-               /* stack frame pointer argument */
         jsr     dbginterrupt_c
         addql   #4,%sp
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index b1703c67a4f1..f3236d0b522d 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -162,7 +162,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
                 totalram_pages++;
                 pages++;
         }
-        printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+        printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages * (PAGE_SIZE / 1024));
 }
 #endif
 
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 0f41ba82a3b5..942397984c66 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -17,7 +17,6 @@
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
-#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S
index b1aef72f3baf..9d80d2c42866 100644
--- a/arch/m68knommu/platform/68328/entry.S
+++ b/arch/m68knommu/platform/68328/entry.S
@@ -39,17 +39,17 @@
 .globl inthandler7
 
 badsys:
-        movel   #-ENOSYS,%sp@(PT_D0)
+        movel   #-ENOSYS,%sp@(PT_OFF_D0)
         jra     ret_from_exception
 
 do_trace:
-        movel   #-ENOSYS,%sp@(PT_D0)    /* needed for strace*/
+        movel   #-ENOSYS,%sp@(PT_OFF_D0)        /* needed for strace*/
         subql   #4,%sp
         SAVE_SWITCH_STACK
         jbsr    syscall_trace
         RESTORE_SWITCH_STACK
         addql   #4,%sp
-        movel   %sp@(PT_ORIG_D0),%d1
+        movel   %sp@(PT_OFF_ORIG_D0),%d1
         movel   #-ENOSYS,%d0
         cmpl    #NR_syscalls,%d1
         jcc     1f
@@ -57,7 +57,7 @@ do_trace:
         lea     sys_call_table, %a0
         jbsr    %a0@(%d1)
 
-1:      movel   %d0,%sp@(PT_D0)         /* save the return value */
+1:      movel   %d0,%sp@(PT_OFF_D0)             /* save the return value */
         subql   #4,%sp                  /* dummy return address */
         SAVE_SWITCH_STACK
         jbsr    syscall_trace
@@ -75,7 +75,7 @@ ENTRY(system_call)
         jbsr    set_esp0
         addql   #4,%sp
 
-        movel   %sp@(PT_ORIG_D0),%d0
+        movel   %sp@(PT_OFF_ORIG_D0),%d0
 
         movel   %sp,%d1                 /* get thread_info pointer */
         andl    #-THREAD_SIZE,%d1
@@ -88,10 +88,10 @@ ENTRY(system_call)
         lea     sys_call_table,%a0
         movel   %a0@(%d0), %a0
         jbsr    %a0@
-        movel   %d0,%sp@(PT_D0)         /* save the return value*/
+        movel   %d0,%sp@(PT_OFF_D0)             /* save the return value*/
 
 ret_from_exception:
-        btst    #5,%sp@(PT_SR)          /* check if returning to kernel*/
+        btst    #5,%sp@(PT_OFF_SR)              /* check if returning to kernel*/
         jeq     Luser_return            /* if so, skip resched, signals*/
 
 Lkernel_return:
@@ -133,7 +133,7 @@ Lreturn:
  */
 inthandler1:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -144,7 +144,7 @@ inthandler1:
 
 inthandler2:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -155,7 +155,7 @@ inthandler2:
 
 inthandler3:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -166,7 +166,7 @@ inthandler3:
 
 inthandler4:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -177,7 +177,7 @@ inthandler4:
 
 inthandler5:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -188,7 +188,7 @@ inthandler5:
 
 inthandler6:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -199,7 +199,7 @@ inthandler6:
 
 inthandler7:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -210,7 +210,7 @@ inthandler7:
 
 inthandler:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and     #0x3ff, %d0
 
         movel   %sp,%sp@-
@@ -224,7 +224,7 @@ ret_from_interrupt:
 2:
         RESTORE_ALL
 1:
-        moveb   %sp@(PT_SR), %d0
+        moveb   %sp@(PT_OFF_SR), %d0
         and     #7, %d0
         jhi     2b
 
diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S
index 55dfefe38642..6d3460a39cac 100644
--- a/arch/m68knommu/platform/68360/entry.S
+++ b/arch/m68knommu/platform/68360/entry.S
@@ -35,17 +35,17 @@
 .globl inthandler
 
 badsys:
-        movel   #-ENOSYS,%sp@(PT_D0)
+        movel   #-ENOSYS,%sp@(PT_OFF_D0)
         jra     ret_from_exception
 
 do_trace:
-        movel   #-ENOSYS,%sp@(PT_D0)    /* needed for strace*/
+        movel   #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
         subql   #4,%sp
         SAVE_SWITCH_STACK
         jbsr    syscall_trace
         RESTORE_SWITCH_STACK
         addql   #4,%sp
-        movel   %sp@(PT_ORIG_D0),%d1
+        movel   %sp@(PT_OFF_ORIG_D0),%d1
         movel   #-ENOSYS,%d0
         cmpl    #NR_syscalls,%d1
         jcc     1f
@@ -53,7 +53,7 @@ do_trace:
         lea     sys_call_table, %a0
         jbsr    %a0@(%d1)
 
-1:      movel   %d0,%sp@(PT_D0)         /* save the return value */
+1:      movel   %d0,%sp@(PT_OFF_D0)     /* save the return value */
         subql   #4,%sp                  /* dummy return address */
         SAVE_SWITCH_STACK
         jbsr    syscall_trace
@@ -79,10 +79,10 @@ ENTRY(system_call)
         lea     sys_call_table,%a0
         movel   %a0@(%d0), %a0
         jbsr    %a0@
-        movel   %d0,%sp@(PT_D0)         /* save the return value*/
+        movel   %d0,%sp@(PT_OFF_D0)     /* save the return value*/
 
 ret_from_exception:
-        btst    #5,%sp@(PT_SR)          /* check if returning to kernel*/
+        btst    #5,%sp@(PT_OFF_SR)      /* check if returning to kernel*/
         jeq     Luser_return            /* if so, skip resched, signals*/
 
 Lkernel_return:
@@ -124,7 +124,7 @@ Lreturn:
  */
 inthandler:
         SAVE_ALL
-        movew   %sp@(PT_VECTOR), %d0
+        movew   %sp@(PT_OFF_VECTOR), %d0
         and.l   #0x3ff, %d0
         lsr.l   #0x02,  %d0
 
@@ -139,7 +139,7 @@ ret_from_interrupt:
 2:
         RESTORE_ALL
 1:
-        moveb   %sp@(PT_SR), %d0
+        moveb   %sp@(PT_OFF_SR), %d0
         and     #7, %d0
         jhi     2b
         /* check if we need to do software interrupts */
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index 3b471c0da24a..dd7d591f70ea 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -81,11 +81,11 @@ ENTRY(system_call)
 
         movel   %d3,%a0
         jbsr    %a0@
-        movel   %d0,%sp@(PT_D0)         /* save the return value */
+        movel   %d0,%sp@(PT_OFF_D0)     /* save the return value */
         jra     ret_from_exception
 1:
-        movel   #-ENOSYS,%d2            /* strace needs -ENOSYS in PT_D0 */
-        movel   %d2,PT_D0(%sp)          /* on syscall entry */
+        movel   #-ENOSYS,%d2            /* strace needs -ENOSYS in PT_OFF_D0 */
+        movel   %d2,PT_OFF_D0(%sp)      /* on syscall entry */
         subql   #4,%sp
         SAVE_SWITCH_STACK
         jbsr    syscall_trace
@@ -93,7 +93,7 @@ ENTRY(system_call)
         addql   #4,%sp
         movel   %d3,%a0
         jbsr    %a0@
-        movel   %d0,%sp@(PT_D0)         /* save the return value */
+        movel   %d0,%sp@(PT_OFF_D0)             /* save the return value */
         subql   #4,%sp                  /* dummy return address */
         SAVE_SWITCH_STACK
         jbsr    syscall_trace
@@ -104,7 +104,7 @@ ret_from_signal:
 
 ret_from_exception:
         move    #0x2700,%sr             /* disable intrs */
-        btst    #5,%sp@(PT_SR)          /* check if returning to kernel */
+        btst    #5,%sp@(PT_OFF_SR)      /* check if returning to kernel */
         jeq     Luser_return            /* if so, skip resched, signals */
 
 #ifdef CONFIG_PREEMPT
@@ -142,8 +142,8 @@ Luser_return:
 Lreturn:
         move    #0x2700,%sr             /* disable intrs */
         movel   sw_usp,%a0              /* get usp */
-        movel   %sp@(PT_PC),%a0@-       /* copy exception program counter */
-        movel   %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+        movel   %sp@(PT_OFF_PC),%a0@-   /* copy exception program counter */
+        movel   %sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
         moveml  %sp@,%d1-%d5/%a0-%a2
         lea     %sp@(32),%sp            /* space for 8 regs */
         movel   %sp@+,%d0
@@ -181,9 +181,9 @@ Lsignal_return:
 ENTRY(inthandler)
         SAVE_ALL
         moveq   #-1,%d0
-        movel   %d0,%sp@(PT_ORIG_D0)
+        movel   %d0,%sp@(PT_OFF_ORIG_D0)
 
-        movew   %sp@(PT_FORMATVEC),%d0  /* put exception # in d0 */
+        movew   %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
         andl    #0x03fc,%d0             /* mask out vector only */
 
         movel   %sp,%sp@-               /* push regs arg */
@@ -203,7 +203,7 @@ ENTRY(inthandler)
 ENTRY(fasthandler)
         SAVE_LOCAL
 
-        movew   %sp@(PT_FORMATVEC),%d0
+        movew   %sp@(PT_OFF_FORMATVEC),%d0
         andl    #0x03fc,%d0             /* mask out vector only */
 
         movel   %sp,%sp@-               /* push regs arg */
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index acc1f05d1e2c..e3ecb36dd554 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -592,6 +592,8 @@ C_ENTRY(full_exception_trap):
         nop
         mfs     r7, rfsr;               /* save FSR */
         nop
+        mts     rfsr, r0;       /* Clear sticky fsr */
+        nop
         la      r12, r0, full_exception
         set_vms;
         rtbd    r12, 0;
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 6b0288ebccd6..2b86c03aa841 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -384,7 +384,7 @@ handle_other_ex: /* Handle Other exceptions here */
         addk    r8, r17, r0; /* Load exception address */
         bralid  r15, full_exception; /* Branch to the handler */
         nop;
-        mts     r0, rfsr;       /* Clear sticky fsr */
+        mts     rfsr, r0;       /* Clear sticky fsr */
         nop
 
         /*
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 4201c743cc9f..c592d475b3d8 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -235,7 +235,9 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
         regs->pc = pc;
         regs->r1 = usp;
         regs->pt_mode = 0;
+#ifdef CONFIG_MMU
         regs->msr |= MSR_UMS;
+#endif
 }
 
 #ifdef CONFIG_MMU
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index f388dc68f605..524d9352f17e 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -18,6 +18,7 @@ config PARISC
         select BUG
         select HAVE_PERF_EVENTS
         select GENERIC_ATOMIC64 if !64BIT
+        select HAVE_ARCH_TRACEHOOK
         help
           The PA-RISC microprocessor is designed by Hewlett-Packard and used
           in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/fixmap.h b/arch/parisc/include/asm/fixmap.h
index de3fe3a18229..6fec4d4a1a18 100644
--- a/arch/parisc/include/asm/fixmap.h
+++ b/arch/parisc/include/asm/fixmap.h
@@ -21,9 +21,9 @@
 #define KERNEL_MAP_END          (TMPALIAS_MAP_START)
 
 #ifndef __ASSEMBLY__
-extern void *vmalloc_start;
+extern void *parisc_vmalloc_start;
 #define PCXL_DMA_MAP_SIZE       (8*1024*1024)
-#define VMALLOC_START           ((unsigned long)vmalloc_start)
+#define VMALLOC_START           ((unsigned long)parisc_vmalloc_start)
 #define VMALLOC_END             (KERNEL_MAP_END)
 #endif /*__ASSEMBLY__*/
 
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
index ce93133d5112..0d68184a76cb 100644
--- a/arch/parisc/include/asm/hardirq.h
+++ b/arch/parisc/include/asm/hardirq.h
@@ -1,29 +1,11 @@
 /* hardirq.h: PA-RISC hard IRQ support.
  *
  * Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx>
- *
- * The locking is really quite interesting.  There's a cpu-local
- * count of how many interrupts are being handled, and a global
- * lock.  An interrupt can only be serviced if the global lock
- * is free.  You can't be sure no more interrupts are being
- * serviced until you've acquired the lock and then checked
- * all the per-cpu interrupt counts are all zero.  It's a specialised
- * br_lock, and that's exactly how Sparc does it.  We don't because
- * it's more locking for us.  This way is lock-free in the interrupt path.
  */
 
 #ifndef _PARISC_HARDIRQ_H
 #define _PARISC_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-        unsigned long __softirq_pending; /* set_bit is used on this */
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
 
 #endif /* _PARISC_HARDIRQ_H */
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index 302f68dc889c..aead40b16dd8 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -59,8 +59,11 @@ void user_enable_block_step(struct task_struct *task);
 #define user_mode(regs)                 (((regs)->iaoq[0] & 3) ? 1 : 0)
 #define user_space(regs)                (((regs)->iasq[1] != 0) ? 1 : 0)
 #define instruction_pointer(regs)       ((regs)->iaoq[0] & ~3)
+#define user_stack_pointer(regs)        ((regs)->gr[30])
 unsigned long profile_pc(struct pt_regs *);
 extern void show_regs(struct pt_regs *);
-#endif
+
+
+#endif /* __KERNEL__ */
 
 #endif
diff --git a/arch/parisc/include/asm/syscall.h b/arch/parisc/include/asm/syscall.h
new file mode 100644
index 000000000000..8bdfd2c8c39f
--- /dev/null
+++ b/arch/parisc/include/asm/syscall.h
@@ -0,0 +1,40 @@
+/* syscall.h */
+
+#ifndef _ASM_PARISC_SYSCALL_H_
+#define _ASM_PARISC_SYSCALL_H_
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *tsk,
+                                  struct pt_regs *regs)
+{
+        return regs->gr[20];
+}
+
+static inline void syscall_get_arguments(struct task_struct *tsk,
+                                         struct pt_regs *regs, unsigned int i,
+                                         unsigned int n, unsigned long *args)
+{
+        BUG_ON(i);
+
+        switch (n) {
+        case 6:
+                args[5] = regs->gr[21];
+        case 5:
+                args[4] = regs->gr[22];
+        case 4:
+                args[3] = regs->gr[23];
+        case 3:
+                args[2] = regs->gr[24];
+        case 2:
+                args[1] = regs->gr[25];
+        case 1:
+                args[0] = regs->gr[26];
+                break;
+        default:
+                BUG();
+        }
+}
+
+#endif /*_ASM_PARISC_SYSCALL_H_*/
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index ac775a76bff7..7ecc1039cfed 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -32,6 +32,11 @@ struct thread_info {
 #define init_thread_info        (init_thread_union.thread_info)
 #define init_stack              (init_thread_union.stack)
 
+/* how to get the thread information struct from C */
+#define current_thread_info()   ((struct thread_info *)mfctl(30))
+
+#endif /* !__ASSEMBLY */
+
 /* thread information allocation */
 
 #define THREAD_SIZE_ORDER            2
@@ -40,11 +45,6 @@ struct thread_info {
 #define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 
-/* how to get the thread information struct from C */
-#define current_thread_info()   ((struct thread_info *)mfctl(30))
-
-#endif /* !__ASSEMBLY */
-
 #define PREEMPT_ACTIVE_BIT      28
 #define PREEMPT_ACTIVE          (1 << PREEMPT_ACTIVE_BIT)
 
@@ -60,6 +60,8 @@ struct thread_info {
 #define TIF_RESTORE_SIGMASK     6       /* restore saved signal mask */
 #define TIF_FREEZE              7       /* is freezing for suspend */
 #define TIF_NOTIFY_RESUME       8       /* callback before returning to user */
+#define TIF_SINGLESTEP          9       /* single stepping? */
+#define TIF_BLOCKSTEP           10      /* branch stepping? */
 
 #define _TIF_SYSCALL_TRACE      (1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
@@ -69,6 +71,8 @@ struct thread_info {
 #define _TIF_RESTORE_SIGMASK    (1 << TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1 << TIF_FREEZE)
 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
+#define _TIF_BLOCKSTEP          (1 << TIF_BLOCKSTEP)
 
 #define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
                                  _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 699cf8ef2118..fcd3c707bf12 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -270,8 +270,8 @@ int main(void)
         DEFINE(DTLB_OFF_COUNT, offsetof(struct pdc_cache_info, dt_off_count));
         DEFINE(DTLB_LOOP, offsetof(struct pdc_cache_info, dt_loop));
         BLANK();
-        DEFINE(PA_BLOCKSTEP_BIT, 31-PT_BLOCKSTEP_BIT);
-        DEFINE(PA_SINGLESTEP_BIT, 31-PT_SINGLESTEP_BIT);
+        DEFINE(TIF_BLOCKSTEP_PA_BIT, 31-TIF_BLOCKSTEP);
+        DEFINE(TIF_SINGLESTEP_PA_BIT, 31-TIF_SINGLESTEP);
         BLANK();
         DEFINE(ASM_PMD_SHIFT, PMD_SHIFT);
         DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 8c4712b74dc1..3a44f7f704fa 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -2047,12 +2047,13 @@ syscall_do_signal:
         b,n     syscall_check_sig
 
 syscall_restore:
-        /* Are we being ptraced? */
         LDREG   TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
 
-        ldw     TASK_PTRACE(%r1), %r19
-        bb,<    %r19,31,syscall_restore_rfi
-        nop
+        /* Are we being ptraced? */
+        ldw     TASK_FLAGS(%r1),%r19
+        ldi     (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
+        and,COND(=)     %r19,%r2,%r0
+        b,n     syscall_restore_rfi
 
         ldo     TASK_PT_FR31(%r1),%r19             /* reload fpregs */
         rest_fp %r19
@@ -2113,16 +2114,16 @@ syscall_restore_rfi:
         ldi     0x0b,%r20                          /* Create new PSW */
         depi    -1,13,1,%r20                       /* C, Q, D, and I bits */
 
-        /* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are
-         * set in include/linux/ptrace.h and converted to PA bitmap
+        /* The values of SINGLESTEP_BIT and BLOCKSTEP_BIT are
+         * set in thread_info.h and converted to PA bitmap
          * numbers in asm-offsets.c */
 
-        /* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */
-        extru,= %r19,PA_SINGLESTEP_BIT,1,%r0
+        /* if ((%r19.SINGLESTEP_BIT)) { %r20.27=1} */
+        extru,= %r19,TIF_SINGLESTEP_PA_BIT,1,%r0
         depi    -1,27,1,%r20                       /* R bit */
 
-        /* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */
-        extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0
+        /* if ((%r19.BLOCKSTEP_BIT)) { %r20.7=1} */
+        extru,= %r19,TIF_BLOCKSTEP_PA_BIT,1,%r0
         depi    -1,7,1,%r20                        /* T bit */
 
         STREG   %r20,TASK_PT_PSW(%r1)
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 330f536a9324..2e7610cb33d5 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -423,8 +423,3 @@ void __init init_IRQ(void)
         set_eiem(cpu_eiem);     /* EIEM : enable all external intr */
 
 }
-
-void ack_bad_irq(unsigned int irq)
-{
-        printk(KERN_WARNING "unexpected IRQ %d\n", irq);
-}
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 61ee0eec4e69..212074653df7 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -893,7 +893,7 @@ int module_finalize(const Elf_Ehdr *hdr,
          * ourselves */
         for (i = 1; i < hdr->e_shnum; i++) {
                 if(sechdrs[i].sh_type == SHT_SYMTAB
-                   && (sechdrs[i].sh_type & SHF_ALLOC)) {
+                   && (sechdrs[i].sh_flags & SHF_ALLOC)) {
                         int strindex = sechdrs[i].sh_link;
                         /* FIXME: AWFUL HACK
                          * The cast is to drop the const from
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 927db3668b6f..c4f49e45129d 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/user.h>
 #include <linux/personality.h>
 #include <linux/security.h>
@@ -35,7 +36,8 @@
  */
 void ptrace_disable(struct task_struct *task)
 {
-        task->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP);
+        clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+        clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
 
         /* make sure the trap bits are not set */
         pa_psw(task)->r = 0;
@@ -55,8 +57,8 @@ void user_disable_single_step(struct task_struct *task)
 
 void user_enable_single_step(struct task_struct *task)
 {
-        task->ptrace &= ~PT_BLOCKSTEP;
-        task->ptrace |= PT_SINGLESTEP;
+        clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
+        set_tsk_thread_flag(task, TIF_SINGLESTEP);
 
         if (pa_psw(task)->n) {
                 struct siginfo si;
@@ -98,8 +100,8 @@ void user_enable_single_step(struct task_struct *task)
 
 void user_enable_block_step(struct task_struct *task)
 {
-        task->ptrace &= ~PT_SINGLESTEP;
-        task->ptrace |= PT_BLOCKSTEP;
+        clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+        set_tsk_thread_flag(task, TIF_BLOCKSTEP);
 
         /* Enable taken branch trap. */
         pa_psw(task)->r = 0;
@@ -263,22 +265,20 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 }
 #endif
 
+long do_syscall_trace_enter(struct pt_regs *regs)
+{
+        if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+            tracehook_report_syscall_entry(regs))
+                return -1L;
+
+        return regs->gr[20];
+}
 
-void syscall_trace(void)
+void do_syscall_trace_exit(struct pt_regs *regs)
 {
-        if (!test_thread_flag(TIF_SYSCALL_TRACE))
-                return;
-        if (!(current->ptrace & PT_PTRACED))
-                return;
-        ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-                                 ? 0x80 : 0));
-        /*
-         * this isn't the same as continuing with a signal, but it will do
-         * for normal use.  strace only continues with a signal if the
-         * stopping signal is not SIGTRAP.  -brl
-         */
-        if (current->exit_code) {
-                send_sig(current->exit_code, current, 1);
-                current->exit_code = 0;
-        }
+        int stepping = test_thread_flag(TIF_SINGLESTEP) ||
+                test_thread_flag(TIF_BLOCKSTEP);
+
+        if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
+                tracehook_report_syscall_exit(regs, stepping);
 }
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 8eb3c63c407a..e8467e4aa8d1 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
 #include <linux/compat.h>
@@ -34,7 +35,6 @@
 #include <asm/asm-offsets.h>
 
 #ifdef CONFIG_COMPAT
-#include <linux/compat.h>
 #include "signal32.h"
 #endif
 
@@ -468,6 +468,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
                 sigaddset(&current->blocked,sig);
         recalc_sigpending();
         spin_unlock_irq(&current->sighand->siglock);
+
+        tracehook_signal_handler(sig, info, ka, regs, 0);
+
         return 1;
 }
 
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 59fc1a43ec3e..f5f96021caa0 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -288,18 +288,23 @@ tracesys:
         STREG   %r18,PT_GR18(%r2)
         /* Finished saving things for the debugger */
 
-        ldil    L%syscall_trace,%r1
+        copy    %r2,%r26
+        ldil    L%do_syscall_trace_enter,%r1
         ldil    L%tracesys_next,%r2
-        be      R%syscall_trace(%sr7,%r1)
+        be      R%do_syscall_trace_enter(%sr7,%r1)
         ldo     R%tracesys_next(%r2),%r2
         
-tracesys_next:  
+tracesys_next:
+        /* do_syscall_trace_enter either returned the syscallno, or -1L,
+         *  so we skip restoring the PT_GR20 below, since we pulled it from
+         *  task->thread.regs.gr[20] above.
+         */
+        copy    %ret0,%r20
         ldil    L%sys_call_table,%r1
         ldo     R%sys_call_table(%r1), %r19
 
         ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
         LDREG   TI_TASK(%r1), %r1
-        LDREG   TASK_PT_GR20(%r1), %r20
         LDREG   TASK_PT_GR26(%r1), %r26         /* Restore the users args */
         LDREG   TASK_PT_GR25(%r1), %r25
         LDREG   TASK_PT_GR24(%r1), %r24
@@ -336,7 +341,8 @@ tracesys_exit:
 #ifdef CONFIG_64BIT
         ldo     -16(%r30),%r29                  /* Reference param save area */
 #endif
-        bl      syscall_trace, %r2
+        ldo     TASK_REGS(%r1),%r26
+        bl      do_syscall_trace_exit,%r2
         STREG   %r28,TASK_PT_GR28(%r1)          /* save return value now */
         ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
         LDREG   TI_TASK(%r1), %r1
@@ -353,12 +359,12 @@ tracesys_exit:
 
 tracesys_sigexit:
         ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
-        LDREG   0(%r1), %r1
+        LDREG   TI_TASK(%r1), %r1
 #ifdef CONFIG_64BIT
         ldo     -16(%r30),%r29                  /* Reference param save area */
 #endif
-        bl      syscall_trace, %r2
-        nop
+        bl      do_syscall_trace_exit,%r2
+        ldo     TASK_REGS(%r1),%r26
 
         ldil    L%syscall_exit_rfi,%r1
         be,n    R%syscall_exit_rfi(%sr7,%r1)
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 775be2791bc2..fda4baa059b5 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -28,6 +28,7 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
         
 /* ld script to make hppa Linux kernel */
 #ifndef CONFIG_64BIT
@@ -134,6 +135,15 @@ SECTIONS
         __init_begin = .;
         INIT_TEXT_SECTION(16384)
         INIT_DATA_SECTION(16)
+        /* we have to discard exit text and such at runtime, not link time */
+        .exit.text :
+        {
+                EXIT_TEXT
+        }
+        .exit.data :
+        {
+                EXIT_DATA
+        }
 
         PERCPU(PAGE_SIZE)
         . = ALIGN(PAGE_SIZE);
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index d5aca31fddbb..13b6e3e59b99 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -434,8 +434,8 @@ void mark_rodata_ro(void)
 #define SET_MAP_OFFSET(x) ((void *)(((unsigned long)(x) + VM_MAP_OFFSET) \
                                      & ~(VM_MAP_OFFSET-1)))
 
-void *vmalloc_start __read_mostly;
-EXPORT_SYMBOL(vmalloc_start);
+void *parisc_vmalloc_start __read_mostly;
+EXPORT_SYMBOL(parisc_vmalloc_start);
 
 #ifdef CONFIG_PA11
 unsigned long pcxl_dma_start __read_mostly;
@@ -496,13 +496,14 @@ void __init mem_init(void)
 #ifdef CONFIG_PA11
         if (hppa_dma_ops == &pcxl_dma_ops) {
                 pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
-                vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + PCXL_DMA_MAP_SIZE);
+                parisc_vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start
+                                                + PCXL_DMA_MAP_SIZE);
         } else {
                 pcxl_dma_start = 0;
-                vmalloc_start = SET_MAP_OFFSET(MAP_START);
+                parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
         }
 #else
-        vmalloc_start = SET_MAP_OFFSET(MAP_START);
+        parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
 #endif
 
         printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index cee8080aa245..dd3860846f15 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -210,7 +210,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
                 };
 
                 sram@8000 {
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 4c36186ef946..8e9be6bfe23e 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -199,7 +199,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d00 0x40>;
                         interrupts = <2 15 0>;
-                        fsl5200-clocking;
 
                         rtc@50 {
                                 compatible = "at,24c08";
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index de30b3f9eb26..82ff2b13bc37 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -247,7 +247,6 @@
                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d00 0x40>;
                         interrupts = <2 15 0>;
-                        fsl5200-clocking;
                 };
 
                 i2c@3d40 {
@@ -256,7 +255,6 @@
                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
                 };
                 sram@8000 {
                         compatible = "fsl,mpc5200-sram";
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index d13cb11ce623..e45a63be3a86 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -251,7 +251,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d00 0x40>;
                         interrupts = <2 15 0>;
-                        fsl5200-clocking;
                 };
 
                 i2c@3d40 {
@@ -260,7 +259,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
                 };
 
                 sram@8000 {
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index e297d8b41875..0c3902bc5b6a 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -223,7 +223,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d00 0x40>;
                         interrupts = <2 15 0>;
-                        fsl5200-clocking;
                 };
 
                 i2c@3d40 {
@@ -232,7 +231,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
                 };
 
                 sram@8000 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 7be8ca038676..6ca4fc144a33 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -222,7 +222,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
 
                         rtc@68 {
                                 compatible = "dallas,ds1339";
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c2b8dbfab79e..c353dac33416 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -209,7 +209,6 @@
                         reg = <0x1700 0x20>;
                         interrupts = <9 0x8>;
                         interrupt-parent = < &ipic >;
-                        fsl5200-clocking;
                 };
 
                 i2c@1720 {
@@ -220,7 +219,6 @@
                         reg = <0x1720 0x20>;
                         interrupts = <10 0x8>;
                         interrupt-parent = < &ipic >;
-                        fsl5200-clocking;
                 };
 
                 i2c@1740 {
@@ -231,7 +229,6 @@
                         reg = <0x1740 0x20>;
                         interrupts = <11 0x8>;
                         interrupt-parent = < &ipic >;
-                        fsl5200-clocking;
                 };
 
                 i2ccontrol@1760 {
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
new file mode 100644
index 000000000000..b72a7581d798
--- /dev/null
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -0,0 +1,332 @@
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+        model = "manroland,mucmc52";
+        compatible = "manroland,mucmc52";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&mpc5200_pic>;
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                PowerPC,5200@0 {
+                        device_type = "cpu";
+                        reg = <0>;
+                        d-cache-line-size = <32>;
+                        i-cache-line-size = <32>;
+                        d-cache-size = <0x4000>;        // L1, 16K
+                        i-cache-size = <0x4000>;        // L1, 16K
+                        timebase-frequency = <0>;       // from bootloader
+                        bus-frequency = <0>;            // from bootloader
+                        clock-frequency = <0>;          // from bootloader
+                };
+        };
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x04000000>;  // 64MB
+        };
+
+        soc5200@f0000000 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "fsl,mpc5200b-immr";
+                ranges = <0 0xf0000000 0x0000c000>;
+                reg = <0xf0000000 0x00000100>;
+                bus-frequency = <0>;            // from bootloader
+                system-frequency = <0>;         // from bootloader
+
+                cdm@200 {
+                        compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+                        reg = <0x200 0x38>;
+                };
+
+                mpc5200_pic: interrupt-controller@500 {
+                        // 5200 interrupts are encoded into two levels;
+                        interrupt-controller;
+                        #interrupt-cells = <3>;
+                        compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+                        reg = <0x500 0x80>;
+                };
+
+                gpt0: timer@600 {       // GPT 0 in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x600 0x10>;
+                        interrupts = <1 9 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt1: timer@610 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x610 0x10>;
+                        interrupts = <1 10 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt2: timer@620 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x620 0x10>;
+                        interrupts = <1 11 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt3: timer@630 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x630 0x10>;
+                        interrupts = <1 12 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpio_simple: gpio@b00 {
+                        compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+                        reg = <0xb00 0x40>;
+                        interrupts = <1 7 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpio_wkup: gpio@c00 {
+                        compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+                        reg = <0xc00 0x40>;
+                        interrupts = <1 8 0 0 3 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                dma-controller@1200 {
+                        compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+                        reg = <0x1200 0x80>;
+                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                      3 4 0  3 5 0  3 6 0  3 7 0
+                                      3 8 0  3 9 0  3 10 0  3 11 0
+                                      3 12 0  3 13 0  3 14 0  3 15 0>;
+                };
+
+                xlb@1f00 {
+                        compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+                        reg = <0x1f00 0x100>;
+                };
+
+                serial@2000 { /* PSC1 in UART mode */
+                        compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                        reg = <0x2000 0x100>;
+                        interrupts = <2 1 0>;
+                };
+
+                serial@2200 { /* PSC2 in UART mode */
+                        compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                        reg = <0x2200 0x100>;
+                        interrupts = <2 2 0>;
+                };
+
+                serial@2c00 { /* PSC6 in UART mode */
+                        compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                        reg = <0x2c00 0x100>;
+                        interrupts = <2 4 0>;
+                };
+
+                ethernet@3000 {
+                        compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+                        reg = <0x3000 0x400>;
+                        local-mac-address = [ 00 00 00 00 00 00 ];
+                        interrupts = <2 5 0>;
+                        phy-handle = <&phy0>;
+                };
+
+                mdio@3000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+                        reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
+                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+
+                        phy0: ethernet-phy@0 {
+                                compatible = "intel,lxt971";
+                                reg = <0>;
+                        };
+                };
+
+                ata@3a00 {
+                        compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+                        reg = <0x3a00 0x100>;
+                        interrupts = <2 7 0>;
+                };
+
+                i2c@3d40 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+                        reg = <0x3d40 0x40>;
+                        interrupts = <2 16 0>;
+                        hwmon@2c {
+                                compatible = "ad,adm9240";
+                                reg = <0x2c>;
+                        };
+                        rtc@51 {
+                                compatible = "nxp,pcf8563";
+                                reg = <0x51>;
+                        };
+                };
+
+                sram@8000 {
+                        compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+                        reg = <0x8000 0x4000>;
+                };
+        };
+
+        pci@f0000d00 {
+                #interrupt-cells = <1>;
+                #size-cells = <2>;
+                #address-cells = <3>;
+                device_type = "pci";
+                compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+                reg = <0xf0000d00 0x100>;
+                interrupt-map-mask = <0xf800 0 0 7>;
+                interrupt-map = <
+                                /* IDSEL 0x10 */
+                                0x8000 0 0 1 &mpc5200_pic 0 3 3
+                                0x8000 0 0 2 &mpc5200_pic 0 3 3
+                                0x8000 0 0 3 &mpc5200_pic 0 2 3
+                                0x8000 0 0 4 &mpc5200_pic 0 1 3
+                                >;
+                clock-frequency = <0>; // From boot loader
+                interrupts = <2 8 0 2 9 0 2 10 0>;
+                bus-range = <0 0>;
+                ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+                          0x02000000 0 0x90000000 0x90000000 0 0x10000000
+                          0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+        };
+
+        localbus {
+                compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+                #address-cells = <2>;
+                #size-cells = <1>;
+
+                ranges = <0 0 0xff800000 0x00800000
+                          1 0 0x80000000 0x00800000
+                          3 0 0x80000000 0x00800000>;
+
+                flash@0,0 {
+                        compatible = "cfi-flash";
+                        reg = <0 0 0x00800000>;
+                        bank-width = <4>;
+                        device-width = <2>;
+                        #size-cells = <1>;
+                        #address-cells = <1>;
+                        partition@0 {
+                                label = "DTS";
+                                reg = <0x0 0x00100000>;
+                        };
+                        partition@100000 {
+                                label = "Kernel";
+                                reg = <0x100000 0x00200000>;
+                        };
+                        partition@300000 {
+                                label = "RootFS";
+                                reg = <0x00300000 0x00200000>;
+                        };
+                        partition@500000 {
+                                label = "user";
+                                reg = <0x00500000 0x00200000>;
+                        };
+                        partition@700000 {
+                                label = "U-Boot";
+                                reg = <0x00700000 0x00040000>;
+                        };
+                        partition@740000 {
+                                label = "Env";
+                                reg = <0x00740000 0x00020000>;
+                        };
+                        partition@760000 {
+                                label = "red. Env";
+                                reg = <0x00760000 0x00020000>;
+                        };
+                        partition@780000 {
+                                label = "reserve";
+                                reg = <0x00780000 0x00080000>;
+                        };
+                };
+
+                simple100: gpio-controller-100@3,600100 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600100 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple104: gpio-controller-104@3,600104 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600104 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple200: gpio-controller-200@3,600200 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600200 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple201: gpio-controller-201@3,600201 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600201 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple202: gpio-controller-202@3,600202 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600202 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple203: gpio-controller-203@3,600203 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600203 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple204: gpio-controller-204@3,600204 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600204 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple206: gpio-controller-206@3,600206 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600206 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple207: gpio-controller-207@3,600207 {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x00600207 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+                simple20f: gpio-controller-20f@3,60020f {
+                        compatible = "manroland,mucmc52-aux-gpio";
+                        reg = <3 0x0060020f 0x1>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+        };
+};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 30bfdc04c6df..8a4ec30b21ae 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -244,7 +244,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d00 0x40>;
                         interrupts = <2 15 0>;
-                        fsl5200-clocking;
                 };
 
                 i2c@3d40 {
@@ -253,7 +252,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
                         rtc@51 {
                                 compatible = "nxp,pcf8563";
                                 reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 030042678392..85d857a5d46e 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -244,7 +244,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d00 0x40>;
                         interrupts = <2 15 0>;
-                        fsl5200-clocking;
                 };
 
                 i2c@3d40 {
@@ -253,7 +252,6 @@
                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
                         rtc@51 {
                                 compatible = "nxp,pcf8563";
                                 reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c9590b58b7b0..1db07f6cf133 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -160,7 +160,6 @@
                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
-                        fsl5200-clocking;
 
                          rtc@68 {
                                 compatible = "dallas,ds1307";
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 000000000000..019264c62904
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,284 @@
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+        model = "manroland,uc101";
+        compatible = "manroland,uc101";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&mpc5200_pic>;
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                PowerPC,5200@0 {
+                        device_type = "cpu";
+                        reg = <0>;
+                        d-cache-line-size = <32>;
+                        i-cache-line-size = <32>;
+                        d-cache-size = <0x4000>;        // L1, 16K
+                        i-cache-size = <0x4000>;        // L1, 16K
+                        timebase-frequency = <0>;       // from bootloader
+                        bus-frequency = <0>;            // from bootloader
+                        clock-frequency = <0>;          // from bootloader
+                };
+        };
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x04000000>;  // 64MB
+        };
+
+        soc5200@f0000000 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "fsl,mpc5200b-immr";
+                ranges = <0 0xf0000000 0x0000c000>;
+                reg = <0xf0000000 0x00000100>;
+                bus-frequency = <0>;            // from bootloader
+                system-frequency = <0>;         // from bootloader
+
+                cdm@200 {
+                        compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+                        reg = <0x200 0x38>;
+                };
+
+                mpc5200_pic: interrupt-controller@500 {
+                        // 5200 interrupts are encoded into two levels;
+                        interrupt-controller;
+                        #interrupt-cells = <3>;
+                        compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+                        reg = <0x500 0x80>;
+                };
+
+                gpt0: timer@600 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x600 0x10>;
+                        interrupts = <1 9 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt1: timer@610 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x610 0x10>;
+                        interrupts = <1 10 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt2: timer@620 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x620 0x10>;
+                        interrupts = <1 11 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt3: timer@630 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x630 0x10>;
+                        interrupts = <1 12 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt4: timer@640 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x640 0x10>;
+                        interrupts = <1 13 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt5: timer@650 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x650 0x10>;
+                        interrupts = <1 14 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt6: timer@660 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x660 0x10>;
+                        interrupts = <1 15 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpt7: timer@670 {       // General Purpose Timer in GPIO mode
+                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+                        reg = <0x670 0x10>;
+                        interrupts = <1 16 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpio_simple: gpio@b00 {
+                        compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+                        reg = <0xb00 0x40>;
+                        interrupts = <1 7 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpio_wkup: gpio@c00 {
+                        compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+                        reg = <0xc00 0x40>;
+                        interrupts = <1 8 0 0 3 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                dma-controller@1200 {
+                        compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+                        reg = <0x1200 0x80>;
+                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+                                      3 4 0  3 5 0  3 6 0  3 7 0
+                                      3 8 0  3 9 0  3 10 0  3 11 0
+                                      3 12 0  3 13 0  3 14 0  3 15 0>;
+                };
+
+                xlb@1f00 {
+                        compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+                        reg = <0x1f00 0x100>;
+                };
+
+                serial@2000 { /* PSC1 in UART mode */
+                        compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                        reg = <0x2000 0x100>;
+                        interrupts = <2 1 0>;
+                };
+
+                serial@2200 { /* PSC2 in UART mode */
+                        compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                        reg = <0x2200 0x100>;
+                        interrupts = <2 2 0>;
+                };
+
+                serial@2c00 {           /* PSC6 in UART mode */
+                        compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+                        reg = <0x2c00 0x100>;
+                        interrupts = <2 4 0>;
+                };
+
+                ethernet@3000 {
+                        compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+                        reg = <0x3000 0x400>;
+                        local-mac-address = [ 00 00 00 00 00 00 ];
+                        interrupts = <2 5 0>;
+                        phy-handle = <&phy0>;
+                };
+
+                mdio@3000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+                        reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
+                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+
+                        phy0: ethernet-phy@0 {
+                                compatible = "intel,lxt971";
+                                reg = <0>;
+                        };
+                };
+
+                ata@3a00 {
+                        compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+                        reg = <0x3a00 0x100>;
+                        interrupts = <2 7 0>;
+                };
+
+                i2c@3d40 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+                        reg = <0x3d40 0x40>;
+                        interrupts = <2 16 0>;
+                        fsl,preserve-clocking;
+                        clock-frequency = <400000>;
+
+                        hwmon@2c {
+                                compatible = "ad,adm9240";
+                                reg = <0x2c>;
+                        };
+                        rtc@51 {
+                                compatible = "nxp,pcf8563";
+                                reg = <0x51>;
+                        };
+                };
+
+                sram@8000 {
+                        compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+                        reg = <0x8000 0x4000>;
+                };
+        };
+
+        localbus {
+                compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+                #address-cells = <2>;
+                #size-cells = <1>;
+
+                ranges = <0 0 0xff800000 0x00800000
+                          1 0 0x80000000 0x00800000
+                          3 0 0x80000000 0x00800000>;
+
+                flash@0,0 {
+                        compatible = "cfi-flash";
+                        reg = <0 0 0x00800000>;
+                        bank-width = <2>;
+                        device-width = <2>;
+                        #size-cells = <1>;
+                        #address-cells = <1>;
+
+                        partition@0 {
+                                label = "DTS";
+                                reg = <0x0 0x00100000>;
+                        };
+                        partition@100000 {
+                                label = "Kernel";
+                                reg = <0x100000 0x00200000>;
+                        };
+                        partition@300000 {
+                                label = "RootFS";
+                                reg = <0x00300000 0x00200000>;
+                        };
+                        partition@500000 {
+                                label = "user";
+                                reg = <0x00500000 0x00200000>;
+                        };
+                        partition@700000 {
+                                label = "U-Boot";
+                                reg = <0x00700000 0x00040000>;
+                        };
+                        partition@740000 {
+                                label = "Env";
+                                reg = <0x00740000 0x00010000>;
+                        };
+                        partition@750000 {
+                                label = "red. Env";
+                                reg = <0x00750000 0x00010000>;
+                        };
+                        partition@760000 {
+                                label = "reserve";
+                                reg = <0x00760000 0x000a0000>;
+                        };
+                };
+
+        };
+};
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 3838b77b8116..0396ce7bffc6 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:47:44 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -219,11 +237,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -239,9 +259,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -252,6 +273,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -328,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -342,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -367,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -457,6 +482,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -495,10 +521,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -519,7 +541,6 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -558,14 +579,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -636,6 +657,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -646,6 +668,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -666,23 +689,23 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -713,25 +736,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -775,11 +785,12 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
@@ -866,6 +877,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -885,10 +900,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -959,12 +977,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1064,6 +1082,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1073,6 +1092,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1090,10 +1110,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1105,11 +1129,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1118,23 +1143,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1159,7 +1186,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1200,11 +1226,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 29b0f34488f5..f5c07fd72239 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:04 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,12 +56,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -78,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -106,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,6 +125,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -127,14 +140,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -228,11 +246,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,9 +268,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -264,6 +285,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -348,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -362,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -387,6 +411,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -397,6 +422,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -431,7 +457,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,10 +482,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -475,6 +499,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -483,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -502,7 +529,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -514,11 +540,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -540,6 +569,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -568,6 +598,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -586,14 +617,17 @@ CONFIG_PATA_MPC52xx=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -640,9 +674,12 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -661,6 +698,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -686,10 +725,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -759,6 +795,7 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -787,6 +824,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -812,23 +850,23 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -847,30 +885,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -913,6 +939,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -932,10 +962,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -992,12 +1025,12 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1041,6 +1074,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1050,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1067,10 +1102,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1082,11 +1121,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1095,23 +1135,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1136,7 +1178,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1178,11 +1219,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 07b6b266ea95..4f77a1bdc8f9 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:22 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,11 +238,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -240,9 +260,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -253,6 +274,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -329,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -343,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -368,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -458,6 +483,7 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -483,6 +509,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -506,10 +533,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -532,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -540,7 +564,6 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -579,14 +602,14 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -647,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -657,6 +681,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -676,22 +701,28 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -738,6 +769,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -747,9 +780,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -775,25 +806,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -817,7 +835,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -866,6 +884,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -893,6 +912,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -912,10 +935,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -986,12 +1012,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1091,6 +1117,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1100,6 +1127,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1117,10 +1145,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1132,11 +1164,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1145,23 +1178,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1186,7 +1221,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1227,11 +1261,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index afb1a3d1ef0a..f9168c1a2fa5 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:42 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -79,11 +85,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -105,7 +112,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
 CONFIG_COMPAT_BRK=y
@@ -125,7 +138,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -133,7 +145,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +164,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -227,11 +245,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -247,9 +267,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -336,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -350,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -375,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -382,9 +406,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -467,6 +491,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -492,10 +517,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -515,6 +536,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -536,6 +558,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -564,6 +587,7 @@ CONFIG_PATA_MPC52xx=m
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -582,14 +606,17 @@ CONFIG_PATA_MPC52xx=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -636,16 +663,16 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -722,6 +749,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -750,6 +778,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -776,23 +805,23 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -811,30 +840,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -871,15 +888,17 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_SOC is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 # CONFIG_USB_OHCI_HCD_PCI is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -995,6 +1014,7 @@ CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1022,6 +1042,10 @@ CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1041,12 +1065,16 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1114,7 +1142,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1210,6 +1238,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1223,23 +1252,12 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 8585c7c12861..75c835c2ae66 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:57 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:23 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -118,6 +124,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -145,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -225,11 +243,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -245,9 +265,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -258,6 +279,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -334,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -348,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,6 +397,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -382,9 +407,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -464,6 +489,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -502,10 +528,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -529,6 +551,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -538,7 +561,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -577,14 +599,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -654,6 +676,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -664,6 +687,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -685,22 +709,28 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -747,6 +777,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -756,9 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -789,25 +819,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -851,11 +868,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
@@ -969,6 +987,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -996,6 +1015,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1015,10 +1038,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1089,12 +1115,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1194,6 +1220,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1203,6 +1230,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1220,10 +1248,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1235,11 +1267,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1248,23 +1281,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1289,7 +1324,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1331,11 +1365,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index aaa4416660e9..523d5fe18c0e 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Mon Apr 20 11:06:25 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:21 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,12 +57,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -79,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -103,7 +110,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,6 +122,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -124,14 +137,19 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -205,7 +223,7 @@ CONFIG_RTAS_PROC=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=y
 
 #
 # Kernel options
@@ -229,11 +247,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -249,9 +269,10 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -265,6 +286,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -349,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -363,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -388,6 +412,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -397,9 +422,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -458,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -493,6 +519,7 @@ CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -529,7 +556,9 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -552,10 +581,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -572,6 +597,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -580,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -599,7 +627,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -611,11 +638,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -637,6 +667,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -665,6 +696,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -684,14 +716,17 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -739,16 +774,17 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -854,6 +890,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
@@ -883,6 +920,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -910,10 +948,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -935,6 +969,11 @@ CONFIG_SPI_MPC52xx_PSC=m
 #
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -957,16 +996,27 @@ CONFIG_GPIOLIB=y
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -1019,6 +1069,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1031,9 +1083,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1073,31 +1123,20 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 CONFIG_DRM=y
 # CONFIG_DRM_TDFX is not set
 # CONFIG_DRM_R128 is not set
@@ -1167,6 +1206,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
@@ -1198,7 +1238,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1217,10 +1256,11 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 # CONFIG_HID_CHICONY is not set
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1231,10 +1271,11 @@ CONFIG_HID_EZKEY=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1261,15 +1302,17 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1400,6 +1443,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1411,6 +1455,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1434,6 +1479,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1453,10 +1502,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1533,12 +1585,12 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1624,6 +1676,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1633,6 +1686,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1650,10 +1704,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1665,11 +1723,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1678,23 +1737,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1719,7 +1780,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1761,11 +1821,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
new file mode 100644
index 000000000000..18af46036258
--- /dev/null
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -0,0 +1,2199 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Fri Oct 16 11:37:15 2009
+#
+CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_64 is not set
+CONFIG_PPC_BOOK3E_64=y
+CONFIG_PPC_BOOK3E=y
+CONFIG_PPC_FPU=y
+CONFIG_BOOKE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_64=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
+CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_U3_DART is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+# CONFIG_SCHED_SMT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
+CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+# CONFIG_NF_CONNTRACK_SANE is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_WINDFARM=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=m
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=y
+CONFIG_ACENIC_OMIT_TIGON_I=y
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+CONFIG_IXGB=m
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+CONFIG_I2C_AMD8111=y
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+CONFIG_USB_APPLEDISPLAY=m
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+# CONFIG_INFINIBAND_AMSO1100 is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+# CONFIG_EDAC_CPC925 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 3a179827528d..20778a405d7a 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -37,7 +37,7 @@
 #define FW_FEATURE_VIO          ASM_CONST(0x0000000000004000)
 #define FW_FEATURE_RDMA         ASM_CONST(0x0000000000008000)
 #define FW_FEATURE_LLAN         ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK         ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_BULK_REMOVE  ASM_CONST(0x0000000000020000)
 #define FW_FEATURE_XDABR        ASM_CONST(0x0000000000040000)
 #define FW_FEATURE_MULTITCE     ASM_CONST(0x0000000000080000)
 #define FW_FEATURE_SPLPAR       ASM_CONST(0x0000000000100000)
@@ -45,8 +45,7 @@
 #define FW_FEATURE_LPAR         ASM_CONST(0x0000000000400000)
 #define FW_FEATURE_PS3_LV1      ASM_CONST(0x0000000000800000)
 #define FW_FEATURE_BEAT         ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE  ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_CMO          ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_CMO          ASM_CONST(0x0000000002000000)
 
 #ifndef __ASSEMBLY__
 
@@ -58,8 +57,9 @@ enum {
                 FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
                 FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
                 FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
-                FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-                FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+                FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
+                FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+                FW_FEATURE_CMO,
         FW_FEATURE_PSERIES_ALWAYS = 0,
         FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
         FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 0b9c9135922e..03c862b6a9c4 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -711,6 +711,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
                 .cpu_setup              = __setup_cpu_750,
                 .machine_check          = machine_check_generic,
                 .platform               = "ppc750",
+                .oprofile_cpu_type      = "ppc/750",
+                .oprofile_type          = PPC_OPROFILE_G4,
         },
         {       /* 745/755 */
                 .pvr_mask               = 0xfffff000,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 900e0eea0099..9763267e38b4 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -658,42 +658,43 @@ do_work:
         cmpdi   r0,0
         crandc  eq,cr1*4+eq,eq
         bne     restore
-        /* here we are preempting the current task */
-1:
-#ifdef CONFIG_TRACE_IRQFLAGS
-        bl      .trace_hardirqs_on
-        /* Note: we just clobbered r10 which used to contain the previous
-         * MSR before the hard-disabling done by the caller of do_work.
-         * We don't have that value anymore, but it doesn't matter as
-         * we will hard-enable unconditionally, we can just reload the
-         * current MSR into r10
+
+        /* Here we are preempting the current task.
+         *
+         * Ensure interrupts are soft-disabled. We also properly mark
+         * the PACA to reflect the fact that they are hard-disabled
+         * and trace the change
          */
-        mfmsr   r10
-#endif /* CONFIG_TRACE_IRQFLAGS */
-        li      r0,1
+        li      r0,0
         stb     r0,PACASOFTIRQEN(r13)
         stb     r0,PACAHARDIRQEN(r13)
+        TRACE_DISABLE_INTS
+
+        /* Call the scheduler with soft IRQs off */
+1:      bl      .preempt_schedule_irq
+
+        /* Hard-disable interrupts again (and update PACA) */
 #ifdef CONFIG_PPC_BOOK3E
-        wrteei  1
-        bl      .preempt_schedule
         wrteei  0
 #else
-        ori     r10,r10,MSR_EE
-        mtmsrd  r10,1           /* reenable interrupts */
-        bl      .preempt_schedule
         mfmsr   r10
-        clrrdi  r9,r1,THREAD_SHIFT
-        rldicl  r10,r10,48,1    /* disable interrupts again */
+        rldicl  r10,r10,48,1
         rotldi  r10,r10,16
         mtmsrd  r10,1
 #endif /* CONFIG_PPC_BOOK3E */
+        li      r0,0
+        stb     r0,PACAHARDIRQEN(r13)
+
+        /* Re-test flags and eventually loop */
+        clrrdi  r9,r1,THREAD_SHIFT
         ld      r4,TI_FLAGS(r9)
         andi.   r0,r4,_TIF_NEED_RESCHED
         bne     1b
         b       restore
 
 user_work:
-#endif
+#endif /* CONFIG_PREEMPT */
+
         /* Enable interrupts */
 #ifdef CONFIG_PPC_BOOK3E
         wrteei  1
@@ -1038,8 +1039,7 @@ _GLOBAL(mod_return_to_handler)
          * We are in a module using the module's TOC.
          * Switch to our TOC to run inside the core kernel.
          */
-        LOAD_REG_IMMEDIATE(r4,ftrace_return_to_handler)
-        ld      r2, 8(r4)
+        ld      r2, PACATOC(r13)
 
         bl      .ftrace_return_to_handler
         nop
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index fe8f71dd0b3f..641c74bb8e27 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -282,12 +282,6 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
         unsigned long *ptr = gdb_regs;
         int reg;
-#ifdef CONFIG_SPE
-        union {
-                u32 v32[2];
-                u64 v64;
-        } acc;
-#endif
 
         for (reg = 0; reg < 32; reg++)
                 UNPACK64(regs->gpr[reg], ptr);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index bb8209e34931..e8dfdbd9327a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1190,7 +1190,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
  */
-static int __init reparent_resources(struct resource *parent,
+static int reparent_resources(struct resource *parent,
                                      struct resource *res)
 {
         struct resource *p, **pp;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ba949a2c93ac..ccf56ac92de5 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -97,7 +97,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
          * to do an appropriate TLB flush here too
          */
         if (bus->self) {
+#ifdef CONFIG_PPC_STD_MMU_64
                 struct resource *res = bus->resource[0];
+#endif
 
                 pr_debug("IO unmapping for PCI-PCI bridge %s\n",
                          pci_name(bus->self));
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index bbcbae183e92..87f1663584b0 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -116,20 +116,23 @@ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
 static inline u32 perf_get_misc_flags(struct pt_regs *regs)
 {
         unsigned long mmcra = regs->dsisr;
+        unsigned long sihv = MMCRA_SIHV;
+        unsigned long sipr = MMCRA_SIPR;
 
         if (TRAP(regs) != 0xf00)
                 return 0;       /* not a PMU interrupt */
 
         if (ppmu->flags & PPMU_ALT_SIPR) {
-                if (mmcra & POWER6_MMCRA_SIHV)
-                        return PERF_RECORD_MISC_HYPERVISOR;
-                return (mmcra & POWER6_MMCRA_SIPR) ?
-                        PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL;
+                sihv = POWER6_MMCRA_SIHV;
+                sipr = POWER6_MMCRA_SIPR;
         }
-        if (mmcra & MMCRA_SIHV)
+
+        /* PR has priority over HV, so order below is important */
+        if (mmcra & sipr)
+                return PERF_RECORD_MISC_USER;
+        if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
                 return PERF_RECORD_MISC_HYPERVISOR;
-        return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER :
-                PERF_RECORD_MISC_KERNEL;
+        return PERF_RECORD_MISC_KERNEL;
 }
 
 /*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 1168c5f440ab..c930ac38e59f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1016,9 +1016,13 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
         int curr_frame = current->curr_ret_stack;
         extern void return_to_handler(void);
-        unsigned long addr = (unsigned long)return_to_handler;
+        unsigned long rth = (unsigned long)return_to_handler;
+        unsigned long mrth = -1;
 #ifdef CONFIG_PPC64
-        addr = *(unsigned long*)addr;
+        extern void mod_return_to_handler(void);
+        rth = *(unsigned long *)rth;
+        mrth = (unsigned long)mod_return_to_handler;
+        mrth = *(unsigned long *)mrth;
 #endif
 #endif
 
@@ -1044,7 +1048,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
                 if (!firstframe || ip != lr) {
                         printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-                        if (ip == addr && curr_frame >= 0) {
+                        if ((ip == rth || ip == mrth) && curr_frame >= 0) {
                                 printk(" (%pS)",
                                        (void *)current->ret_stack[curr_frame].ret);
                                 curr_frame--;
@@ -1168,7 +1172,7 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
         unsigned long base = mm->brk;
         unsigned long ret;
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
         /*
          * If we are using 1TB segments and we are allowed to randomise
          * the heap, we can put it above 1TB so it is backed by a 1TB
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 797ea95aae2e..04f638d82fb3 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -57,7 +57,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/mmu-hash64.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 94e2df3cae07..137dc22afa42 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -50,6 +50,9 @@
 /* Max supported size for symbol names */
 #define MAX_SYMNAME     64
 
+/* The alignment of the vDSO */
+#define VDSO_ALIGNMENT  (1 << 16)
+
 extern char vdso32_start, vdso32_end;
 static void *vdso32_kbase = &vdso32_start;
 static unsigned int vdso32_pages;
@@ -231,15 +234,21 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
          * pick a base address for the vDSO in process space. We try to put it
          * at vdso_base which is the "natural" base for it, but we might fail
          * and end up putting it elsewhere.
+         * Add enough to the size so that the result can be aligned.
          */
         down_write(&mm->mmap_sem);
         vdso_base = get_unmapped_area(NULL, vdso_base,
-                                      vdso_pages << PAGE_SHIFT, 0, 0);
+                                      (vdso_pages << PAGE_SHIFT) +
+                                      ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
+                                      0, 0);
         if (IS_ERR_VALUE(vdso_base)) {
                 rc = vdso_base;
                 goto fail_mmapsem;
         }
 
+        /* Add required alignment. */
+        vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT);
+
         /*
          * Put vDSO base into mm struct. We need to do this before calling
          * install_special_mapping or the perf counter mmap tracking code
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 904ef1360dd7..0546bcd49cd0 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -25,7 +25,7 @@ SECTIONS
         . = ALIGN(16);
         .text           : {
                 *(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
-        }
+        }                                               :text
         PROVIDE(__etext = .);
         PROVIDE(_etext = .);
         PROVIDE(etext = .);
@@ -56,7 +56,7 @@ SECTIONS
         .fixup          : { *(.fixup) }
 
         .dynamic        : { *(.dynamic) }               :text   :dynamic
-        .got            : { *(.got) }
+        .got            : { *(.got) }                   :text
         .plt            : { *(.plt) }
 
         _end = .;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index f56429362a12..27735a7ac12b 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -236,6 +236,7 @@ SECTIONS
                 READ_MOSTLY_DATA(L1_CACHE_BYTES)
         }
 
+        . = ALIGN(PAGE_SIZE);
         .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
                 NOSAVE_DATA
         }
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index bc44dc4b5c67..95ce35581696 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -72,19 +72,17 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 1:
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
-        /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
-         * will be patched by the kernel at boot
+        /* vmalloc mapping gets the encoding from the PACA as the mapping
+         * can be demoted from 64K -> 4K dynamically on some machines
          */
-BEGIN_FTR_SECTION
-        /* check whether this is in vmalloc or ioremap space */
         clrldi  r11,r10,48
         cmpldi  r11,(VMALLOC_SIZE >> 28) - 1
         bgt     5f
         lhz     r11,PACAVMALLOCSLLP(r13)
         b       6f
 5:
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
-_GLOBAL(slb_miss_kernel_load_io)
+        /* IO mapping */
+        _GLOBAL(slb_miss_kernel_load_io)
         li      r11,0
 6:
 BEGIN_FTR_SECTION
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c31e5b534f0a..d45be5b5ad49 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -51,6 +51,8 @@ static void __init mpc5200_simple_setup_arch(void)
 /* list of the supported boards */
 static char *board[] __initdata = {
         "intercontrol,digsy-mtc",
+        "manroland,mucmc52",
+        "manroland,uc101",
         "phytec,pcm030",
         "phytec,pcm032",
         "promess,motionpro",
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index aca5741ddc67..a86c34b3bb84 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -365,7 +365,7 @@ static int axon_msi_probe(struct of_device *device,
                 printk(KERN_ERR
                        "axon_msi: couldn't parse dcr properties on %s\n",
                         dn->full_name);
-                goto out;
+                goto out_free_msic;
         }
 
         msic->dcr_host = dcr_map(dn, dcr_base, dcr_len);
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
index cc7161ff1666..ce014928d460 100644
--- a/arch/powerpc/platforms/iseries/Makefile
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -1,18 +1,9 @@
 EXTRA_CFLAGS    += -mno-minimal-toc
 
-extra-y += dt.o
-
 obj-y += exception.o
-obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
+obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \
         hvcall.o proc.o htab.o iommu.o misc.o irq.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_VIOPATH) += viopath.o vio.o
 obj-$(CONFIG_MODULES) += ksyms.o
-
-quiet_cmd_dt_strings = DT_STR  $@
-      cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \
-                                $< $@
-
-$(obj)/dt_mod.o:        $(obj)/dt.o
-        $(call if_changed,dt_strings)
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index c5a87a72057b..7f45a51fe793 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -51,11 +51,16 @@
 
 /*
  * These are created by the linker script at the start and end
- * of the section containing all the strings from this file.
+ * of the section containing all the strings marked with the DS macro.
  */
 extern char __dt_strings_start[];
 extern char __dt_strings_end[];
 
+#define DS(s)   ({      \
+        static const char __s[] __attribute__((section(".dt_strings"))) = s; \
+        __s;            \
+})
+
 struct iseries_flat_dt {
         struct boot_param_header header;
         u64 reserve_map[2];
@@ -64,9 +69,8 @@ struct iseries_flat_dt {
 static void * __initdata dt_data;
 
 /*
- * Putting these strings here keeps them out of the section
- * that we rename to .dt_strings using objcopy and capture
- * for the strings blob of the flattened device tree.
+ * Putting these strings here keeps them out of the .dt_strings section
+ * that we capture for the strings blob of the flattened device tree.
  */
 static char __initdata device_type_cpu[] = "cpu";
 static char __initdata device_type_memory[] = "memory";
@@ -173,7 +177,7 @@ static void __init dt_start_node(struct iseries_flat_dt *dt, const char *name)
 
 #define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE)
 
-static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name,
                 const void *data, int len)
 {
         unsigned long offset;
@@ -191,44 +195,32 @@ static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
         /* The actual data. */
         dt_push_bytes(dt, data, len);
 }
+#define dt_prop(dt, name, data, len)    __dt_prop((dt), DS(name), (data), (len))
 
-static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name,
-                const char *data)
-{
-        dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */
-}
+#define dt_prop_str(dt, name, data)     \
+        dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */
 
-static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
                 u32 data)
 {
-        dt_prop(dt, name, &data, sizeof(u32));
+        __dt_prop(dt, name, &data, sizeof(u32));
 }
+#define dt_prop_u32(dt, name, data)     __dt_prop_u32((dt), DS(name), (data))
 
-static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
-                                              const char *name,
-                u64 data)
+static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt,
+                const char *name, u64 data)
 {
-        dt_prop(dt, name, &data, sizeof(u64));
+        __dt_prop(dt, name, &data, sizeof(u64));
 }
+#define dt_prop_u64(dt, name, data)     __dt_prop_u64((dt), DS(name), (data))
 
-static void __init dt_prop_u64_list(struct iseries_flat_dt *dt,
-                const char *name, u64 *data, int n)
-{
-        dt_prop(dt, name, data, sizeof(u64) * n);
-}
+#define dt_prop_u64_list(dt, name, data, n)     \
+        dt_prop((dt), name, (data), sizeof(u64) * (n))
 
-static void __init dt_prop_u32_list(struct iseries_flat_dt *dt,
-                const char *name, u32 *data, int n)
-{
-        dt_prop(dt, name, data, sizeof(u32) * n);
-}
+#define dt_prop_u32_list(dt, name, data, n)     \
+        dt_prop((dt), name, (data), sizeof(u32) * (n))
 
-#ifdef notyet
-static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name)
-{
-        dt_prop(dt, name, NULL, 0);
-}
-#endif
+#define dt_prop_empty(dt, name)         dt_prop((dt), name, NULL, 0)
 
 static void __init dt_cpus(struct iseries_flat_dt *dt)
 {
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 21226b74c9b2..414ca9849f23 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -540,8 +540,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
         /* Make sure IRQ is disabled */
         kw_write_reg(reg_ier, 0);
 
-        /* Request chip interrupt */
-        if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
+        /* Request chip interrupt. We set IRQF_TIMER because we don't
+         * want that interrupt disabled between the 2 passes of driver
+         * suspend or we'll have issues running the pfuncs
+         */
+        if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host))
                 host->irq = NO_IRQ;
 
         printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 5a707da3f5c2..0a14d8cd314f 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -51,11 +51,10 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = {
         {FW_FEATURE_VIO,                "hcall-vio"},
         {FW_FEATURE_RDMA,               "hcall-rdma"},
         {FW_FEATURE_LLAN,               "hcall-lLAN"},
-        {FW_FEATURE_BULK,               "hcall-bulk"},
+        {FW_FEATURE_BULK_REMOVE,        "hcall-bulk"},
         {FW_FEATURE_XDABR,              "hcall-xdabr"},
         {FW_FEATURE_MULTITCE,           "hcall-multi-tce"},
         {FW_FEATURE_SPLPAR,             "hcall-splpar"},
-        {FW_FEATURE_BULK_REMOVE,        "hcall-bulk"},
 };
 
 /* Build up the firmware features bitmask using the contents of
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index c6f0a71b405e..bdbe96c8a7e4 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -517,6 +517,15 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
         in_xmon = 0;
 #endif
 
+#ifdef CONFIG_BOOKE
+        if (regs->msr & MSR_DE) {
+                bp = at_breakpoint(regs->nip);
+                if (bp != NULL) {
+                        regs->nip = (unsigned long) &bp->instr[0];
+                        atomic_inc(&bp->ref_count);
+                }
+        }
+#else
         if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
                 bp = at_breakpoint(regs->nip);
                 if (bp != NULL) {
@@ -530,7 +539,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
                         }
                 }
         }
-
+#endif
         insert_cpu_bpts();
 
         local_irq_restore(flags);
@@ -894,6 +903,14 @@ cmds(struct pt_regs *excp)
         }
 }
 
+#ifdef CONFIG_BOOKE
+static int do_step(struct pt_regs *regs)
+{
+        regs->msr |= MSR_DE;
+        mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+        return 1;
+}
+#else
 /*
  * Step a single instruction.
  * Some instructions we emulate, others we execute with MSR_SE set.
@@ -924,6 +941,7 @@ static int do_step(struct pt_regs *regs)
         regs->msr |= MSR_SE;
         return 1;
 }
+#endif
 
 static void bootcmds(void)
 {
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 704dd396257b..77df726180ba 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -438,7 +438,7 @@ static int diag204_probe(void)
                 }
                 if (diag204((unsigned long)SUBC_STIB6 |
                             (unsigned long)INFO_EXT, pages, buf) >= 0) {
-                        diag204_store_sc = SUBC_STIB7;
+                        diag204_store_sc = SUBC_STIB6;
                         diag204_info_type = INFO_EXT;
                         goto out;
                 }
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 24b1244aadb9..f23961ada7fb 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -78,7 +78,7 @@ cputime64_to_jiffies64(cputime64_t cputime)
 static inline unsigned int
 cputime_to_msecs(const cputime_t cputime)
 {
-        return __div(cputime, 4096000);
+        return cputime_div(cputime, 4096000);
 }
 
 static inline cputime_t
@@ -160,7 +160,7 @@ cputime_to_timeval(const cputime_t cputime, struct timeval *value)
 static inline clock_t
 cputime_to_clock_t(cputime_t cputime)
 {
-        return __div(cputime, 4096000000ULL / USER_HZ);
+        return cputime_div(cputime, 4096000000ULL / USER_HZ);
 }
 
 static inline cputime_t
@@ -175,7 +175,7 @@ clock_t_to_cputime(unsigned long x)
 static inline clock_t
 cputime64_to_clock_t(cputime64_t cputime)
 {
-       return __div(cputime, 4096000000ULL / USER_HZ);
+       return cputime_div(cputime, 4096000000ULL / USER_HZ);
 }
 
 struct s390_idle_data {
diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h
index a356c958e260..8a096b83f51f 100644
--- a/arch/s390/include/asm/delay.h
+++ b/arch/s390/include/asm/delay.h
@@ -14,10 +14,11 @@
 #ifndef _S390_DELAY_H
 #define _S390_DELAY_H
 
-extern void __udelay(unsigned long usecs);
-extern void udelay_simple(unsigned long usecs);
+extern void __udelay(unsigned long long usecs);
+extern void udelay_simple(unsigned long long usecs);
 extern void __delay(unsigned long loops);
 
-#define udelay(n) __udelay(n)
+#define udelay(n) __udelay((unsigned long long) (n))
+#define mdelay(n) __udelay((unsigned long long) (n) * 1000)
 
 #endif /* defined(_S390_DELAY_H) */
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 74d0bbb7d955..e885442c1dfe 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -92,6 +92,18 @@
 /* Keep this the last entry.  */
 #define R_390_NUM       61
 
+/* Bits present in AT_HWCAP. */
+#define HWCAP_S390_ESAN3        1
+#define HWCAP_S390_ZARCH        2
+#define HWCAP_S390_STFLE        4
+#define HWCAP_S390_MSA          8
+#define HWCAP_S390_LDISP        16
+#define HWCAP_S390_EIMM         32
+#define HWCAP_S390_DFP          64
+#define HWCAP_S390_HPAGE        128
+#define HWCAP_S390_ETF3EH       256
+#define HWCAP_S390_HIGH_GPRS    512
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 539263fc9ab9..95dcf183a28d 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -311,6 +311,10 @@ typedef struct
         __u32           orig_gpr2;
 } s390_compat_regs;
 
+typedef struct
+{
+        __u32           gprs_high[NUM_GPRS];
+} s390_compat_regs_high;
 
 #ifdef __KERNEL__
 
diff --git a/arch/s390/include/asm/ucontext.h b/arch/s390/include/asm/ucontext.h
index d69bec0b03f5..cfb874e66c9a 100644
--- a/arch/s390/include/asm/ucontext.h
+++ b/arch/s390/include/asm/ucontext.h
@@ -9,6 +9,21 @@
 #ifndef _ASM_S390_UCONTEXT_H
 #define _ASM_S390_UCONTEXT_H
 
+#define UC_EXTENDED     0x00000001
+
+#ifndef __s390x__
+
+struct ucontext_extended {
+        unsigned long     uc_flags;
+        struct ucontext  *uc_link;
+        stack_t           uc_stack;
+        _sigregs          uc_mcontext;
+        unsigned long     uc_sigmask[2];
+        unsigned long     uc_gprs_high[16];
+};
+
+#endif
+
 struct ucontext {
         unsigned long     uc_flags;
         struct ucontext  *uc_link;
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index b537cb0e9b55..eee999853a7c 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -39,6 +39,7 @@ typedef struct
         struct sigcontext32 sc;
         _sigregs32 sregs;
         int signo;
+        __u32 gprs_high[NUM_GPRS];
         __u8 retcode[S390_SYSCALL_SIZE];
 } sigframe32;
 
@@ -48,6 +49,7 @@ typedef struct
         __u8 retcode[S390_SYSCALL_SIZE];
         compat_siginfo_t info;
         struct ucontext32 uc;
+        __u32 gprs_high[NUM_GPRS];
 } rt_sigframe32;
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
@@ -344,6 +346,30 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
         return 0;
 }
 
+static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+        __u32 gprs_high[NUM_GPRS];
+        int i;
+
+        for (i = 0; i < NUM_GPRS; i++)
+                gprs_high[i] = regs->gprs[i] >> 32;
+
+        return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high));
+}
+
+static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+        __u32 gprs_high[NUM_GPRS];
+        int err, i;
+
+        err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high));
+        if (err)
+                return err;
+        for (i = 0; i < NUM_GPRS; i++)
+                *(__u32 *)&regs->gprs[i] = gprs_high[i];
+        return 0;
+}
+
 asmlinkage long sys32_sigreturn(void)
 {
         struct pt_regs *regs = task_pt_regs(current);
@@ -363,6 +389,8 @@ asmlinkage long sys32_sigreturn(void)
 
         if (restore_sigregs32(regs, &frame->sregs))
                 goto badframe;
+        if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+                goto badframe;
 
         return regs->gprs[2];
 
@@ -394,6 +422,8 @@ asmlinkage long sys32_rt_sigreturn(void)
 
         if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
                 goto badframe;
+        if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+                goto badframe;
 
         err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp);
         st.ss_sp = compat_ptr(ss_sp);
@@ -474,6 +504,8 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 
         if (save_sigregs32(regs, &frame->sregs))
                 goto give_sigsegv;
+        if (save_sigregs_gprs_high(regs, frame->gprs_high))
+                goto give_sigsegv;
         if (__put_user((unsigned long) &frame->sregs, &frame->sc.sregs))
                 goto give_sigsegv;
 
@@ -529,13 +561,14 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
                 goto give_sigsegv;
 
         /* Create the ucontext.  */
-        err |= __put_user(0, &frame->uc.uc_flags);
+        err |= __put_user(UC_EXTENDED, &frame->uc.uc_flags);
         err |= __put_user(0, &frame->uc.uc_link);
         err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
         err |= __put_user(sas_ss_flags(regs->gprs[15]),
                           &frame->uc.uc_stack.ss_flags);
         err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
         err |= save_sigregs32(regs, &frame->uc.uc_mcontext);
+        err |= save_sigregs_gprs_high(regs, frame->gprs_high);
         err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
         if (err)
                 goto give_sigsegv;
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 682fb69dba21..cbd9901dc0f8 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -409,7 +409,7 @@ sys32_munmap_wrapper:
         .globl  sys32_truncate_wrapper
 sys32_truncate_wrapper:
         llgtr   %r2,%r2                 # const char *
-        llgfr   %r3,%r3                 # unsigned long
+        lgfr    %r3,%r3                 # long
         jg      sys_truncate            # branch to system call
 
         .globl  sys32_ftruncate_wrapper
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 57bdcb1e3cdf..f5fe34dd821b 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -185,9 +185,6 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
 {
         struct ftrace_graph_ent trace;
 
-        /* Nmi's are currently unsupported. */
-        if (unlikely(in_nmi()))
-                goto out;
         if (unlikely(atomic_read(&current->tracing_graph_pause)))
                 goto out;
         if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index ee57a42e6e93..4890ac6d7faa 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1595,10 +1595,9 @@ static void stop_run(struct shutdown_trigger *trigger)
 {
         if (strcmp(trigger->name, ON_PANIC_STR) == 0)
                 disabled_wait((unsigned long) __builtin_return_address(0));
-        else {
-                signal_processor(smp_processor_id(), sigp_stop);
-                for (;;);
-        }
+        while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy)
+                cpu_relax();
+        for (;;);
 }
 
 static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR,
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index ab2e3ed28abc..639380a0c45c 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -55,6 +55,8 @@ void *module_alloc(unsigned long size)
 /* Free memory returned from module_alloc */
 void module_free(struct module *mod, void *module_region)
 {
+        vfree(mod->arch.syminfo);
+        mod->arch.syminfo = NULL;
         vfree(module_region);
 }
 
@@ -402,6 +404,7 @@ int module_finalize(const Elf_Ehdr *hdr,
                     struct module *me)
 {
         vfree(me->arch.syminfo);
+        me->arch.syminfo = NULL;
         return module_bug_finalize(hdr, sechdrs, me);
 }
 
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 802c8ab247f3..0729f36c2fe3 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -31,9 +31,9 @@ void __cpuinit print_cpu_info(void)
 
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
-        static const char *hwcap_str[9] = {
+        static const char *hwcap_str[10] = {
                 "esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
-                "edat", "etf3eh"
+                "edat", "etf3eh", "highgprs"
         };
         struct _lowcore *lc;
         unsigned long n = (unsigned long) v - 1;
@@ -48,7 +48,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
                            num_online_cpus(), loops_per_jiffy/(500000/HZ),
                            (loops_per_jiffy/(5000/HZ))%100);
                 seq_puts(m, "features\t: ");
-                for (i = 0; i < 9; i++)
+                for (i = 0; i < 10; i++)
                         if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
                                 seq_printf(m, "%s ", hwcap_str[i]);
                 seq_puts(m, "\n");
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index a8738676b26c..653c6a178740 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -57,6 +57,7 @@
 enum s390_regset {
         REGSET_GENERAL,
         REGSET_FP,
+        REGSET_GENERAL_EXTENDED,
 };
 
 static void
@@ -879,6 +880,67 @@ static int s390_compat_regs_set(struct task_struct *target,
         return rc;
 }
 
+static int s390_compat_regs_high_get(struct task_struct *target,
+                                     const struct user_regset *regset,
+                                     unsigned int pos, unsigned int count,
+                                     void *kbuf, void __user *ubuf)
+{
+        compat_ulong_t *gprs_high;
+
+        gprs_high = (compat_ulong_t *)
+                &task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+        if (kbuf) {
+                compat_ulong_t *k = kbuf;
+                while (count > 0) {
+                        *k++ = *gprs_high;
+                        gprs_high += 2;
+                        count -= sizeof(*k);
+                }
+        } else {
+                compat_ulong_t __user *u = ubuf;
+                while (count > 0) {
+                        if (__put_user(*gprs_high, u++))
+                                return -EFAULT;
+                        gprs_high += 2;
+                        count -= sizeof(*u);
+                }
+        }
+        return 0;
+}
+
+static int s390_compat_regs_high_set(struct task_struct *target,
+                                     const struct user_regset *regset,
+                                     unsigned int pos, unsigned int count,
+                                     const void *kbuf, const void __user *ubuf)
+{
+        compat_ulong_t *gprs_high;
+        int rc = 0;
+
+        gprs_high = (compat_ulong_t *)
+                &task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+        if (kbuf) {
+                const compat_ulong_t *k = kbuf;
+                while (count > 0) {
+                        *gprs_high = *k++;
+                        *gprs_high += 2;
+                        count -= sizeof(*k);
+                }
+        } else {
+                const compat_ulong_t  __user *u = ubuf;
+                while (count > 0 && !rc) {
+                        unsigned long word;
+                        rc = __get_user(word, u++);
+                        if (rc)
+                                break;
+                        *gprs_high = word;
+                        *gprs_high += 2;
+                        count -= sizeof(*u);
+                }
+        }
+
+        return rc;
+}
+
 static const struct user_regset s390_compat_regsets[] = {
         [REGSET_GENERAL] = {
                 .core_note_type = NT_PRSTATUS,
@@ -896,6 +958,14 @@ static const struct user_regset s390_compat_regsets[] = {
                 .get = s390_fpregs_get,
                 .set = s390_fpregs_set,
         },
+        [REGSET_GENERAL_EXTENDED] = {
+                .core_note_type = NT_PRXSTATUS,
+                .n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t),
+                .size = sizeof(compat_long_t),
+                .align = sizeof(compat_long_t),
+                .get = s390_compat_regs_high_get,
+                .set = s390_compat_regs_high_set,
+        },
 };
 
 static const struct user_regset_view user_s390_compat_view = {
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9ed13a1ed376..061479ff029f 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -729,7 +729,7 @@ static void __init setup_hwcaps(void)
 
         if ((facility_list & (1UL << (31 - 22)))
             && (facility_list & (1UL << (31 - 30))))
-                elf_hwcap |= 1UL << 8;
+                elf_hwcap |= HWCAP_S390_ETF3EH;
 
         /*
          * Check for additional facilities with store-facility-list-extended.
@@ -748,11 +748,20 @@ static void __init setup_hwcaps(void)
             __stfle(&facility_list_extended, 1) > 0) {
                 if ((facility_list_extended & (1ULL << (63 - 42)))
                     && (facility_list_extended & (1ULL << (63 - 44))))
-                        elf_hwcap |= 1UL << 6;
+                        elf_hwcap |= HWCAP_S390_DFP;
         }
 
+        /*
+         * Huge page support HWCAP_S390_HPAGE is bit 7.
+         */
         if (MACHINE_HAS_HPAGE)
-                elf_hwcap |= 1UL << 7;
+                elf_hwcap |= HWCAP_S390_HPAGE;
+
+        /*
+         * 64-bit register support for 31-bit processes
+         * HWCAP_S390_HIGH_GPRS is bit 9.
+         */
+        elf_hwcap |= HWCAP_S390_HIGH_GPRS;
 
         switch (S390_lowcore.cpu_id.machine) {
         case 0x9672:
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index c932caa5e850..93e52039321b 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -76,7 +76,6 @@ static int cpu_stopped(int cpu)
         __u32 status;
 
         switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
-        case sigp_order_code_accepted:
         case sigp_status_stored:
                 /* Check for stopped and check stop state */
                 if (status & 0x50)
@@ -638,6 +637,8 @@ void __cpu_die(unsigned int cpu)
         /* Wait until target cpu is down */
         while (!cpu_stopped(cpu))
                 cpu_relax();
+        while (signal_processor_p(0, cpu, sigp_set_prefix) == sigp_busy)
+                udelay(10);
         smp_free_lowcore(cpu);
         pr_info("Processor %d stopped\n", cpu);
 }
@@ -645,8 +646,8 @@ void __cpu_die(unsigned int cpu)
 void cpu_die(void)
 {
         idle_task_exit();
-        signal_processor(smp_processor_id(), sigp_stop);
-        BUG();
+        while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy)
+                cpu_relax();
         for (;;);
 }
 
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index fe927d0bc20b..0c26cc1898ec 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -43,7 +43,7 @@ swsusp_arch_suspend:
         lghi    %r1,0x1000
 
         /* Save CPU address */
-        stap    __LC_CPU_ADDRESS(%r1)
+        stap    __LC_CPU_ADDRESS(%r0)
 
         /* Store registers */
         mvc     0x318(4,%r1),__SF_EMPTY(%r15)   /* move prefix to lowcore */
@@ -69,8 +69,21 @@ swsusp_arch_suspend:
         stmg    %r0,%r15,0x280(%r1)             /* store general registers */
 
         stpt    0x328(%r1)                      /* store timer */
+        stck    __SF_EMPTY(%r15)                /* store clock */
         stckc   0x330(%r1)                      /* store clock comparator */
 
+        /* Update cputime accounting before going to sleep */
+        lg      %r0,__LC_LAST_UPDATE_TIMER
+        slg     %r0,0x328(%r1)
+        alg     %r0,__LC_SYSTEM_TIMER
+        stg     %r0,__LC_SYSTEM_TIMER
+        mvc     __LC_LAST_UPDATE_TIMER(8),0x328(%r1)
+        lg      %r0,__LC_LAST_UPDATE_CLOCK
+        slg     %r0,__SF_EMPTY(%r15)
+        alg     %r0,__LC_STEAL_TIMER
+        stg     %r0,__LC_STEAL_TIMER
+        mvc     __LC_LAST_UPDATE_CLOCK(8),__SF_EMPTY(%r15)
+
         /* Activate DAT */
         stosm   __SF_EMPTY(%r15),0x04
 
@@ -159,8 +172,7 @@ pgm_check_entry:
         larl    %r1,.Lresume_cpu                /* Resume CPU address: r2 */
         stap    0(%r1)
         llgh    %r2,0(%r1)
-        lghi    %r3,0x1000
-        llgh    %r1,__LC_CPU_ADDRESS(%r3)       /* Suspend CPU address: r1 */
+        llgh    %r1,__LC_CPU_ADDRESS(%r0)       /* Suspend CPU address: r1 */
         cgr     %r1,%r2
         je      restore_registers               /* r1 = r2 -> nothing to do */
         larl    %r4,.Lrestart_suspend_psw       /* Set new restart PSW */
@@ -187,6 +199,7 @@ pgm_check_entry:
         brc     2,4b                    /* busy, try again */
 5:
         sigp    %r9,%r2,__SIGP_STOP     /* stop resume (current) CPU */
+        brc     2,5b                    /* busy, try again */
 6:      j       6b
 
 restart_suspend:
@@ -194,14 +207,18 @@ restart_suspend:
         llgh    %r2,0(%r1)
 7:
         sigp    %r9,%r2,__SIGP_SENSE    /* Wait for resume CPU */
+        brc     8,7b                    /* accepted, status 0, still running */
         brc     2,7b                    /* busy, try again */
         tmll    %r9,0x40                /* Test if resume CPU is stopped */
         jz      7b
 
 restore_registers:
         /* Restore registers */
-        lghi    %r13,0x1000             /* %r1 = pointer to save arae */
+        lghi    %r13,0x1000             /* %r1 = pointer to save area */
 
+        /* Ignore time spent in suspended state. */
+        llgf    %r1,0x318(%r13)
+        stck    __LC_LAST_UPDATE_CLOCK(%r1)
         spt     0x328(%r13)             /* reprogram timer */
         //sckc  0x330(%r13)             /* set clock comparator */
 
@@ -229,9 +246,6 @@ restore_registers:
         /* Load old stack */
         lg      %r15,0x2f8(%r13)
 
-        /* Pointer to save area */
-        lghi    %r13,0x1000
-
         /* Restore prefix register */
         spx     0x318(%r13)
 
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 45a3e9a7ae21..adfb32aa6d59 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -247,6 +247,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
         }
 
         /*
+         * Put vDSO base into mm struct. We need to do this before calling
+         * install_special_mapping or the perf counter mmap tracking code
+         * will fail to recognise it as a vDSO (since arch_vma_name fails).
+         */
+        current->mm->context.vdso_base = vdso_base;
+
+        /*
          * our vma flags don't have VM_WRITE so by default, the process
          * isn't allowed to write those pages.
          * gdb can break that with ptrace interface, and thus trigger COW
@@ -267,14 +274,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
                                      VM_ALWAYSDUMP,
                                      vdso_pagelist);
         if (rc)
-                goto out_up;
-
-        /* Put vDSO base into mm struct */
-        current->mm->context.vdso_base = vdso_base;
-
-        up_write(&mm->mmap_sem);
-        return 0;
-
+                current->mm->context.vdso_base = 0;
 out_up:
         up_write(&mm->mmap_sem);
         return rc;
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index bc15ef93e656..a68ac10213b2 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -51,6 +51,7 @@ SECTIONS
 
         . = ALIGN(PAGE_SIZE);
         _eshared = .;           /* End of shareable data */
+        _sdata = .;             /* Start of data section */
 
         EXCEPTION_TABLE(16) :data
 
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index ec5eee7c25d8..06cce8285ba0 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -58,7 +58,7 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
 int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
 
-static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
+static inline long kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
 {
         return vcpu->arch.sie_block->gmslm
                 - vcpu->arch.sie_block->gmsor
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 97c1eca83cc2..752b362bf651 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -25,13 +25,13 @@ void __delay(unsigned long loops)
         asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
 }
 
-static void __udelay_disabled(unsigned long usecs)
+static void __udelay_disabled(unsigned long long usecs)
 {
         unsigned long mask, cr0, cr0_saved;
         u64 clock_saved;
 
         clock_saved = local_tick_disable();
-        set_clock_comparator(get_clock() + ((u64) usecs << 12));
+        set_clock_comparator(get_clock() + (usecs << 12));
         __ctl_store(cr0_saved, 0, 0);
         cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
         __ctl_load(cr0 , 0, 0);
@@ -46,20 +46,25 @@ static void __udelay_disabled(unsigned long usecs)
         set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-static void __udelay_enabled(unsigned long usecs)
+static void __udelay_enabled(unsigned long long usecs)
 {
         unsigned long mask;
-        u64 end, time;
+        u64 clock_saved;
+        u64 end;
 
         mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
-        end = get_clock() + ((u64) usecs << 12);
+        end = get_clock() + (usecs << 12);
         do {
-                time = end < S390_lowcore.clock_comparator ?
-                        end : S390_lowcore.clock_comparator;
-                set_clock_comparator(time);
+                clock_saved = 0;
+                if (end < S390_lowcore.clock_comparator) {
+                        clock_saved = local_tick_disable();
+                        set_clock_comparator(end);
+                }
                 trace_hardirqs_on();
                 __load_psw_mask(mask);
                 local_irq_disable();
+                if (clock_saved)
+                        local_tick_enable(clock_saved);
         } while (get_clock() < end);
         set_clock_comparator(S390_lowcore.clock_comparator);
 }
@@ -67,7 +72,7 @@ static void __udelay_enabled(unsigned long usecs)
 /*
  * Waits for 'usecs' microseconds using the TOD clock comparator.
  */
-void __udelay(unsigned long usecs)
+void __udelay(unsigned long long usecs)
 {
         unsigned long flags;
 
@@ -101,11 +106,11 @@ EXPORT_SYMBOL(__udelay);
  * Simple udelay variant. To be used on startup and reboot
  * when the interrupt handler isn't working.
  */
-void udelay_simple(unsigned long usecs)
+void udelay_simple(unsigned long long usecs)
 {
         u64 end;
 
-        end = get_clock() + ((u64) usecs << 12);
+        end = get_clock() + (usecs << 12);
         while (get_clock() < end)
                 cpu_relax();
 }
diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c
index 3f15aaf54855..58da3f461214 100644
--- a/arch/s390/lib/uaccess_mvcos.c
+++ b/arch/s390/lib/uaccess_mvcos.c
@@ -36,7 +36,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
         tmp1 = -4096UL;
         asm volatile(
                 "0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n"
-                "   jz    7f\n"
+                "9: jz    7f\n"
                 "1:"ALR"  %0,%3\n"
                 "  "SLR"  %1,%3\n"
                 "  "SLR"  %2,%3\n"
@@ -47,7 +47,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
                 "  "CLR"  %0,%4\n"      /* copy crosses next page boundary? */
                 "   jnh   4f\n"
                 "3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n"
-                "  "SLR"  %0,%4\n"
+                "10:"SLR"  %0,%4\n"
                 "  "ALR"  %2,%4\n"
                 "4:"LHI"  %4,-1\n"
                 "  "ALR"  %4,%0\n"      /* copy remaining size, subtract 1 */
@@ -61,7 +61,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
                 "   j     8f\n"
                 "7:"SLR"  %0,%0\n"
                 "8: \n"
-                EX_TABLE(0b,2b) EX_TABLE(3b,4b)
+                EX_TABLE(0b,2b) EX_TABLE(3b,4b) EX_TABLE(9b,2b) EX_TABLE(10b,4b)
                 : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
                 : "d" (reg0) : "cc", "memory");
         return size;
@@ -82,7 +82,7 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
         tmp1 = -4096UL;
         asm volatile(
                 "0: .insn ss,0xc80000000000,0(%0,%1),0(%2),0\n"
-                "   jz    4f\n"
+                "6: jz    4f\n"
                 "1:"ALR"  %0,%3\n"
                 "  "SLR"  %1,%3\n"
                 "  "SLR"  %2,%3\n"
@@ -93,11 +93,11 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
                 "  "CLR"  %0,%4\n"      /* copy crosses next page boundary? */
                 "   jnh   5f\n"
                 "3: .insn ss,0xc80000000000,0(%4,%1),0(%2),0\n"
-                "  "SLR"  %0,%4\n"
+                "7:"SLR"  %0,%4\n"
                 "   j     5f\n"
                 "4:"SLR"  %0,%0\n"
                 "5: \n"
-                EX_TABLE(0b,2b) EX_TABLE(3b,5b)
+                EX_TABLE(0b,2b) EX_TABLE(3b,5b) EX_TABLE(6b,2b) EX_TABLE(7b,5b)
                 : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
                 : "d" (reg0) : "cc", "memory");
         return size;
diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c
index d2ffbadb51a7..07deaeee14c8 100644
--- a/arch/s390/lib/uaccess_std.c
+++ b/arch/s390/lib/uaccess_std.c
@@ -36,12 +36,12 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
         tmp1 = -256UL;
         asm volatile(
                 "0: mvcp  0(%0,%2),0(%1),%3\n"
-                "   jz    8f\n"
+                "10:jz    8f\n"
                 "1:"ALR"  %0,%3\n"
                 "   la    %1,256(%1)\n"
                 "   la    %2,256(%2)\n"
                 "2: mvcp  0(%0,%2),0(%1),%3\n"
-                "   jnz   1b\n"
+                "11:jnz   1b\n"
                 "   j     8f\n"
                 "3: la    %4,255(%1)\n" /* %4 = ptr + 255 */
                 "  "LHI"  %3,-4096\n"
@@ -50,7 +50,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
                 "  "CLR"  %0,%4\n"      /* copy crosses next page boundary? */
                 "   jnh   5f\n"
                 "4: mvcp  0(%4,%2),0(%1),%3\n"
-                "  "SLR"  %0,%4\n"
+                "12:"SLR"  %0,%4\n"
                 "  "ALR"  %2,%4\n"
                 "5:"LHI"  %4,-1\n"
                 "  "ALR"  %4,%0\n"      /* copy remaining size, subtract 1 */
@@ -65,6 +65,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
                 "8:"SLR"  %0,%0\n"
                 "9: \n"
                 EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b)
+                EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b)
                 : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
                 : : "cc", "memory");
         return size;
@@ -85,12 +86,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
         tmp1 = -256UL;
         asm volatile(
                 "0: mvcs  0(%0,%1),0(%2),%3\n"
-                "   jz    5f\n"
+                "7: jz    5f\n"
                 "1:"ALR"  %0,%3\n"
                 "   la    %1,256(%1)\n"
                 "   la    %2,256(%2)\n"
                 "2: mvcs  0(%0,%1),0(%2),%3\n"
-                "   jnz   1b\n"
+                "8: jnz   1b\n"
                 "   j     5f\n"
                 "3: la    %4,255(%1)\n" /* %4 = ptr + 255 */
                 "  "LHI"  %3,-4096\n"
@@ -99,11 +100,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
                 "  "CLR"  %0,%4\n"      /* copy crosses next page boundary? */
                 "   jnh   6f\n"
                 "4: mvcs  0(%4,%1),0(%2),%3\n"
-                "  "SLR"  %0,%4\n"
+                "9:"SLR"  %0,%4\n"
                 "   j     6f\n"
                 "5:"SLR"  %0,%0\n"
                 "6: \n"
                 EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b)
+                EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b)
                 : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
                 : : "cc", "memory");
         return size;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index c60bfb309ce6..2757c5616a07 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -279,7 +279,10 @@ int s390_enable_sie(void)
         /* lets check if we are allowed to replace the mm */
         task_lock(tsk);
         if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-            tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+            !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+            tsk->mm != tsk->active_mm) {
                 task_unlock(tsk);
                 return -EINVAL;
         }
@@ -295,7 +298,10 @@ int s390_enable_sie(void)
         /* Now lets check again if something happened */
         task_lock(tsk);
         if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-            tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+            !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+            tsk->mm != tsk->active_mm) {
                 mmput(mm);
                 task_unlock(tsk);
                 return -EINVAL;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b940424f8ccc..88cdeb9f72d9 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -37,7 +37,6 @@ config SUPERH32
         select HAVE_FTRACE_MCOUNT_RECORD
         select HAVE_DYNAMIC_FTRACE
         select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-        select HAVE_FTRACE_SYSCALLS
         select HAVE_FUNCTION_GRAPH_TRACER
         select HAVE_ARCH_KGDB
         select ARCH_HIBERNATION_POSSIBLE if MMU
@@ -122,6 +121,9 @@ config SYS_SUPPORTS_APM_EMULATION
         bool
         select ARCH_SUSPEND_POSSIBLE
 
+config SYS_SUPPORTS_HUGETLBFS
+        bool
+
 config SYS_SUPPORTS_SMP
         bool
 
@@ -196,6 +198,7 @@ config CPU_SH4
         select CPU_HAS_SR_RB
         select CPU_HAS_FPU if !CPU_SH4AL_DSP
         select SYS_SUPPORTS_TMU
+        select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SH4A
         bool
@@ -210,6 +213,7 @@ config CPU_SH5
         bool
         select CPU_HAS_FPU
         select SYS_SUPPORTS_TMU
+        select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SHX2
         bool
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fc51a918b31a..66e40aabc600 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -199,7 +199,7 @@ endif
 libs-$(CONFIG_SUPERH32)         := arch/sh/lib/ $(libs-y)
 libs-$(CONFIG_SUPERH64)         := arch/sh/lib64/ $(libs-y)
 
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
                zImage vmlinux.srec romImage
 PHONY += maketools $(BOOT_TARGETS) FORCE
 
@@ -225,6 +225,7 @@ define archhelp
         @echo '  vmlinux.srec              - Create an ELF S-record'
         @echo '* uImage                    - Alias to bootable U-Boot image'
         @echo '  uImage.srec               - Create an S-record for U-Boot'
+        @echo '  uImage.bin                - Kernel-only image for U-Boot (bin)'
         @echo '* uImage.gz                 - Kernel-only image for U-Boot (gzip)'
         @echo '  uImage.bz2                - Kernel-only image for U-Boot (bzip2)'
         @echo '  uImage.lzma               - Kernel-only image for U-Boot (lzma)'
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 0a37c8bfc959..99ffc5f1c0dd 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -205,8 +205,6 @@ static void __init setup_port_multiplexing(void)
 
 static void __init mpr2_setup(char **cmdline_p)
 {
-        __set_io_port_base(0xa0000000);
-
         /* set Pin Select Register A:
          * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
          * /IOIS16,  IRQ4,      IRQ5,     USB1d_SUSPEND
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index ebe99227d4e6..a4b7402d6176 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -42,8 +42,6 @@ static void __init dreamcast_setup(char **cmdline_p)
         /* Acknowledge any previous events */
         /* XXX */
 
-        __set_io_port_base(0xa0000000);
-
         /* Assign all virtual IRQs to the System ASIC int. handler */
         for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
                 set_irq_chip_and_handler(i, &systemasic_int,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5f9881e16e2f..3b1ceb46fa54 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
 #include <linux/input.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -38,6 +39,20 @@
  *  0x1800_0000  MFI              16bit
  */
 
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
 /* Heartbeat */
 static unsigned char led_pos[] = { 0, 1, 2, 3 };
 static struct heartbeat_data heartbeat_data = {
@@ -70,7 +85,7 @@ static struct mtd_partition nor_flash_partitions[] = {
                 .name = "boot loader",
                 .offset = 0,
                 .size = (5 * 1024 * 1024),
-                .mask_flags = MTD_CAP_ROM,
+                .mask_flags = MTD_WRITEABLE,  /* force read-only */
         }, {
                 .name = "free-area",
                 .offset = MTDPART_OFS_APPEND,
@@ -376,6 +391,43 @@ static struct platform_device keysc_device = {
         },
 };
 
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+        int val = 0;
+        gpio_free(GPIO_FN_INTC_IRQ0);
+        gpio_request(GPIO_PTZ0, NULL);
+        gpio_direction_input(GPIO_PTZ0);
+
+        val = gpio_get_value(GPIO_PTZ0);
+
+        gpio_free(GPIO_PTZ0);
+        gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+        return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+        gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+        return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+        .model                  = 2007,
+        .x_plate_ohms           = 180,
+        .get_pendown_state      = ts_get_pendown_state,
+        .init_platform_hw       = ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+        I2C_BOARD_INFO("tsc2007", 0x48),
+        .type           = "tsc2007",
+        .platform_data  = &tsc2007_info,
+        .irq            = IRQ0,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
         &heartbeat_device,
         &nor_flash_device,
@@ -460,6 +512,11 @@ static void __init sh_eth_init(void)
 #define IODRIVEA  0xA405018A
 static int __init arch_setup(void)
 {
+        /* enable STATUS0, STATUS2 and PDSTATUS */
+        gpio_request(GPIO_FN_STATUS0, NULL);
+        gpio_request(GPIO_FN_STATUS2, NULL);
+        gpio_request(GPIO_FN_PDSTATUS, NULL);
+
         /* enable SCIFA0 */
         gpio_request(GPIO_FN_SCIF0_TXD, NULL);
         gpio_request(GPIO_FN_SCIF0_RXD, NULL);
@@ -590,6 +647,10 @@ static int __init arch_setup(void)
                  */
                 gpio_request(GPIO_PTF4, NULL);
                 gpio_direction_output(GPIO_PTF4, 1);
+
+                /* enable TouchScreen */
+                i2c_register_board_info(0, &ts_i2c_clients, 1);
+                set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
         }
 
         /* enable CEU0 */
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 25cdf7358000..528013188196 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -14,7 +14,6 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/kdev_t.h>
 #include <linux/cdev.h>
 #include <linux/fs.h>
@@ -35,7 +34,7 @@ static int gio_open(struct inode *inode, struct file *filp)
         int minor;
         int ret = -ENOENT;
 
-        lock_kernel();
+        preempt_disable();
         minor = MINOR(inode->i_rdev);
         if (minor < DEVCOUNT) {
                 if (openCnt > 0) {
@@ -45,7 +44,7 @@ static int gio_open(struct inode *inode, struct file *filp)
                         ret = 0;
                 }
         }
-        unlock_kernel();
+        preempt_enable();
         return ret;
 }
 
@@ -60,8 +59,7 @@ static int gio_close(struct inode *inode, struct file *filp)
         return 0;
 }
 
-static int gio_ioctl(struct inode *inode, struct file *filp,
-                             unsigned int cmd, unsigned long arg)
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
         unsigned int data;
         static unsigned int addr = 0;
@@ -129,7 +127,7 @@ static const struct file_operations gio_fops = {
         .owner = THIS_MODULE,
         .open = gio_open,       /* open */
         .release = gio_close,   /* release */
-        .ioctl = gio_ioctl,     /* ioctl */
+        .unlocked_ioctl = gio_ioctl,
 };
 
 static int __init gio_init(void)
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 4af3a771c058..c37617e63220 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -11,10 +11,6 @@
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
index af64d030a5c7..a5c0df785bfe 100644
--- a/arch/sh/boards/mach-rsk/setup.c
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -15,14 +15,12 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#ifdef CONFIG_MTD
 #include <linux/mtd/map.h>
+#endif
 #include <asm/machvec.h>
 #include <asm/io.h>
 
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
 static struct mtd_partition rsk_partitions[] = {
         {
                 .name           = "Bootloader",
@@ -41,6 +39,8 @@ static struct mtd_partition rsk_partitions[] = {
 };
 
 static struct physmap_flash_data flash_data = {
+        .parts          = rsk_partitions,
+        .nr_parts       = ARRAY_SIZE(rsk_partitions),
         .width          = 2,
 };
 
@@ -60,7 +60,8 @@ static struct platform_device flash_device = {
         },
 };
 
-static struct mtd_info *flash_mtd;
+#ifdef CONFIG_MTD
+static const char *probes[] = { "cmdlinepart", NULL };
 
 static struct map_info rsk_flash_map = {
         .name           = "RSK+ Flash",
@@ -68,6 +69,10 @@ static struct map_info rsk_flash_map = {
         .bankwidth      = 2,
 };
 
+static struct mtd_info *flash_mtd;
+
+static struct mtd_partition *parsed_partitions;
+
 static void __init set_mtd_partitions(void)
 {
         int nr_parts = 0;
@@ -77,14 +82,14 @@ static void __init set_mtd_partitions(void)
         nr_parts = parse_mtd_partitions(flash_mtd, probes,
                                         &parsed_partitions, 0);
         /* If there is no partition table, used the hard coded table */
-        if (nr_parts <= 0) {
-                flash_data.parts = rsk_partitions;
-                flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
-        } else {
+        if (nr_parts > 0) {
                 flash_data.nr_parts = nr_parts;
                 flash_data.parts = parsed_partitions;
         }
 }
+#else
+static inline void set_mtd_partitions(void) {}
+#endif
 
 static struct platform_device *rsk_devices[] __initdata = {
         &flash_device,
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index a1316872be6f..cb8cf5572e79 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,11 +20,12 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
 CONFIG_ENTRY_OFFSET     ?= 0x00001000
 
+suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 subdir- := compressed romimage
 
@@ -88,6 +89,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
         $(call if_changed,uimage,lzma)
 
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+        $(call if_changed,uimage,none)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
         $(call if_changed,objcopy)
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 0151933e5253..bb407ef0b91e 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -152,8 +152,6 @@ call_do_page_fault:
         mov.l   1f, r0
         mov.l   @r0, r6
 
-        sti
-
         mov.l   3f, r0
         mov.l   4f, r1
         mov     r15, r4
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 03b3616c80a5..2d07084e4882 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -20,6 +20,7 @@
 #include <linux/list.h>
 #include <linux/mempool.h>
 #include <linux/mm.h>
+#include <linux/ftrace.h>
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
 #include <asm/sections.h>
@@ -557,6 +558,27 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
         if (!pc && !prev)
                 pc = (unsigned long)current_text_addr();
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+        /*
+         * If our stack has been patched by the function graph tracer
+         * then we might see the address of return_to_handler() where we
+         * expected to find the real return address.
+         */
+        if (pc == (unsigned long)&return_to_handler) {
+                int index = current->curr_ret_stack;
+
+                /*
+                 * We currently have no way of tracking how many
+                 * return_to_handler()'s we've seen. If there is more
+                 * than one patched return address on our stack,
+                 * complain loudly.
+                 */
+                WARN_ON(index > 0);
+
+                pc = current->ret_stack[index].ret;
+        }
+#endif
+
         frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
         if (!frame) {
                 printk(KERN_ERR "Unable to allocate a dwarf frame\n");
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 68d9223b145e..3eb84931d2aa 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -121,7 +121,7 @@ noresched:
 ENTRY(resume_userspace)
         ! r8: current_thread_info
         cli
-        TRACE_IRQS_OfF
+        TRACE_IRQS_OFF
         mov.l   @(TI_FLAGS,r8), r0              ! current_thread_info->flags
         tst     #(_TIF_WORK_MASK & 0xff), r0
         bt/s    __restore_all
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index a3dcc6d5d253..2c48e267256e 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -291,31 +291,48 @@ struct syscall_metadata *syscall_nr_to_meta(int nr)
         return syscalls_metadata[nr];
 }
 
-void arch_init_ftrace_syscalls(void)
+int syscall_name_to_nr(char *name)
+{
+        int i;
+
+        if (!syscalls_metadata)
+                return -1;
+        for (i = 0; i < NR_syscalls; i++)
+                if (syscalls_metadata[i])
+                        if (!strcmp(syscalls_metadata[i]->name, name))
+                                return i;
+        return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+        syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+        syscalls_metadata[num]->exit_id = id;
+}
+
+static int __init arch_init_ftrace_syscalls(void)
 {
         int i;
         struct syscall_metadata *meta;
         unsigned long **psys_syscall_table = &sys_call_table;
-        static atomic_t refs;
-
-        if (atomic_inc_return(&refs) != 1)
-                goto end;
 
         syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
                                         FTRACE_SYSCALL_MAX, GFP_KERNEL);
         if (!syscalls_metadata) {
                 WARN_ON(1);
-                return;
+                return -ENOMEM;
         }
 
         for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
                 meta = find_syscall_meta(psys_syscall_table[i]);
                 syscalls_metadata[i] = meta;
         }
-        return;
 
-        /* Paranoid: avoid overflow */
-end:
-        atomic_dec(&refs);
+        return 0;
 }
+arch_initcall(arch_init_ftrace_syscalls);
 #endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 4ff507239286..b8fa6524760a 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -147,6 +147,9 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 {
+        if (PXSEG(addr) >= P1SEG)
+                return (void __iomem *)addr;
+
         return (void __iomem *)(addr + generic_io_base);
 }
 
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 7cb933ba4957..eac7da772fc2 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
+#include <linux/ftrace.h>
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
@@ -106,7 +107,7 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 #endif
 
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
         struct pt_regs *old_regs = set_irq_regs(regs);
 #ifdef CONFIG_IRQSTACKS
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 548f6607fd0f..cbce639b108a 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <asm/machvec.h>
 #include <asm/sections.h>
+#include <asm/addrspace.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -133,4 +134,6 @@ void __init sh_mv_setup(void)
 
         if (!sh_mv.mv_nr_irqs)
                 sh_mv.mv_nr_irqs = NR_IRQS;
+
+        __set_io_port_base(P2SEG);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index f9d44f8e0df6..99b4fb553bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -549,6 +549,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
         if (cpu == 0)
                 seq_printf(m, "machine\t\t: %s\n", get_system_type());
+        else
+                seq_printf(m, "\n");
 
         seq_printf(m, "processor\t: %d\n", cpu);
         seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8dbe26b17c44..444cce3ae921 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -84,6 +84,21 @@ DECLARE_EXPORT(__movstrSI60);
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
+DECLARE_EXPORT(__movmemSI8);
+DECLARE_EXPORT(__movmemSI12);
+DECLARE_EXPORT(__movmemSI16);
+DECLARE_EXPORT(__movmemSI20);
+DECLARE_EXPORT(__movmemSI24);
+DECLARE_EXPORT(__movmemSI28);
+DECLARE_EXPORT(__movmemSI32);
+DECLARE_EXPORT(__movmemSI36);
+DECLARE_EXPORT(__movmemSI40);
+DECLARE_EXPORT(__movmemSI44);
+DECLARE_EXPORT(__movmemSI48);
+DECLARE_EXPORT(__movmemSI52);
+DECLARE_EXPORT(__movmemSI56);
+DECLARE_EXPORT(__movmemSI60);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 6729703547a1..3db37425210d 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -145,7 +145,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
 {
         struct task_struct *tsk = current;
 
-        if (!(current_cpu_data.flags & CPU_HAS_FPU))
+        if (!(boot_cpu_data.flags & CPU_HAS_FPU))
                 return 0;
 
         set_used_math();
@@ -158,7 +158,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
 {
         struct task_struct *tsk = current;
 
-        if (!(current_cpu_data.flags & CPU_HAS_FPU))
+        if (!(boot_cpu_data.flags & CPU_HAS_FPU))
                 return 0;
 
         if (!used_math()) {
@@ -199,7 +199,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
 #undef COPY
 
 #ifdef CONFIG_SH_FPU
-        if (current_cpu_data.flags & CPU_HAS_FPU) {
+        if (boot_cpu_data.flags & CPU_HAS_FPU) {
                 int owned_fp;
                 struct task_struct *tsk = current;
 
@@ -472,6 +472,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
                 err |= __put_user(OR_R0_R0, &frame->retcode[6]);
                 err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
                 regs->pr = (unsigned long) frame->retcode;
+                flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
         }
 
         if (err)
@@ -497,8 +498,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
         pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
                  current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-        flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
-
         return 0;
 
 give_sigsegv:
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 442d8d47a41e..160db1003cfb 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -35,6 +35,8 @@ static inline void __init smp_store_cpu_info(unsigned int cpu)
 {
         struct sh_cpuinfo *c = cpu_data + cpu;
 
+        memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
+
         c->loops_per_jiffy = loops_per_jiffy;
 }
 
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 69bb1652eccd..7a2ee3a6b8e7 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
 #include <linux/kexec.h>
 #include <linux/limits.h>
 #include <linux/proc_fs.h>
+#include <linux/sysfs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
@@ -54,8 +55,8 @@ static unsigned long se_multi;
 /* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
    valid! */
 static int se_usermode = 3;
-/* 0: no warning 1: print a warning message */
-static int se_kernmode_warn = 1;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
 
 #ifdef CONFIG_PROC_FS
 static const char *se_usermode_action[] = {
@@ -159,12 +160,12 @@ void die(const char * str, struct pt_regs * regs, long err)
 
         oops_enter();
 
-        console_verbose();
         spin_lock_irq(&die_lock);
+        console_verbose();
         bust_spinlocks(1);
 
         printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-
+        sysfs_printk_last_file();
         print_modules();
         show_regs(regs);
 
@@ -180,6 +181,7 @@ void die(const char * str, struct pt_regs * regs, long err)
         bust_spinlocks(0);
         add_taint(TAINT_DIE);
         spin_unlock_irq(&die_lock);
+        oops_exit();
 
         if (kexec_should_crash(current))
                 crash_kexec(regs);
@@ -190,7 +192,6 @@ void die(const char * str, struct pt_regs * regs, long err)
         if (panic_on_oops)
                 panic("Fatal exception");
 
-        oops_exit();
         do_exit(SIGSEGV);
 }
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 64dc1ad59801..7f7b52f9beba 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -227,7 +227,7 @@ endchoice
 
 choice
         prompt "HugeTLB page size"
-        depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+        depends on HUGETLB_PAGE
         default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
         default HUGETLB_PAGE_SIZE_64K
 
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b2453bbef4cd..519e2d16cd06 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -26,7 +26,7 @@
 #define MAX_DCACHE_PAGES        64      /* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES        32
 
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
                                unsigned long exec_offset);
 
 /*
@@ -43,7 +43,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-static void sh4_flush_icache_range(void *args)
+static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 {
         struct flusher_data *data = args;
         unsigned long start, end;
@@ -89,8 +89,7 @@ static void sh4_flush_icache_range(void *args)
         local_irq_restore(flags);
 }
 
-static inline void flush_cache_4096(unsigned long start,
-                                    unsigned long phys)
+static inline void flush_cache_one(unsigned long start, unsigned long phys)
 {
         unsigned long flags, exec_offset = 0;
 
@@ -103,8 +102,7 @@ static inline void flush_cache_4096(unsigned long start,
                 exec_offset = 0x20000000;
 
         local_irq_save(flags);
-        __flush_cache_4096(start | SH_CACHE_ASSOC,
-                           P1SEGADDR(phys), exec_offset);
+        __flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
         local_irq_restore(flags);
 }
 
@@ -129,8 +127,8 @@ static void sh4_flush_dcache_page(void *arg)
 
                 /* Loop all the D-cache */
                 n = boot_cpu_data.dcache.n_aliases;
-                for (i = 0; i < n; i++, addr += 4096)
-                        flush_cache_4096(addr, phys);
+                for (i = 0; i < n; i++, addr += PAGE_SIZE)
+                        flush_cache_one(addr, phys);
         }
 
         wmb();
@@ -318,11 +316,11 @@ static void sh4_flush_cache_page(void *args)
         /* We only need to flush D-cache when we have alias */
         if ((address^phys) & alias_mask) {
                 /* Loop 4K of the D-cache */
-                flush_cache_4096(
+                flush_cache_one(
                         CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
                         phys);
                 /* Loop another 4K of the D-cache */
-                flush_cache_4096(
+                flush_cache_one(
                         CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
                         phys);
         }
@@ -337,7 +335,7 @@ static void sh4_flush_cache_page(void *args)
                  * kernel has never executed the code through its identity
                  * translation.
                  */
-                flush_cache_4096(
+                flush_cache_one(
                         CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
                         phys);
         }
@@ -393,7 +391,7 @@ static void sh4_flush_cache_range(void *args)
 }
 
 /**
- * __flush_cache_4096
+ * __flush_cache_one
  *
  * @addr:  address in memory mapped cache array
  * @phys:  P1 address to flush (has to match tags if addr has 'A' bit
@@ -406,7 +404,7 @@ static void sh4_flush_cache_range(void *args)
  * operation (purge/write-back) is selected by the lower 2 bits of
  * 'phys'.
  */
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
                                unsigned long exec_offset)
 {
         int way_count;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2cadee2037ac..2601935eb589 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args)
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __flush_dcache_page(unsigned long phys)
+static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
 {
         unsigned long ways, waysize, addrstart;
         unsigned long flags;
@@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg)
                 __flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-static void sh7705_flush_cache_all(void *args)
+static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
 {
         unsigned long flags;
 
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 35c37b7f717a..a2dc7f9ecc51 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -128,7 +128,7 @@ void __update_cache(struct vm_area_struct *vma,
                 return;
 
         page = pfn_to_page(pfn);
-        if (pfn_valid(pfn) && page_mapping(page)) {
+        if (pfn_valid(pfn)) {
                 int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
                 if (dirty) {
                         unsigned long addr = (unsigned long)page_address(page);
@@ -265,6 +265,8 @@ static void __init emit_cache_params(void)
 
 void __init cpu_cache_init(void)
 {
+        unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+
         compute_alias(&boot_cpu_data.icache);
         compute_alias(&boot_cpu_data.dcache);
         compute_alias(&boot_cpu_data.scache);
@@ -273,6 +275,13 @@ void __init cpu_cache_init(void)
         __flush_purge_region            = noop__flush_region;
         __flush_invalidate_region       = noop__flush_region;
 
+        /*
+         * No flushing is necessary in the disabled cache case so we can
+         * just keep the noop functions in local_flush_..() and __flush_..()
+         */
+        if (unlikely(cache_disabled))
+                goto skip;
+
         if (boot_cpu_data.family == CPU_FAMILY_SH2) {
                 extern void __weak sh2_cache_init(void);
 
@@ -312,5 +321,6 @@ void __init cpu_cache_init(void)
                 sh5_cache_init();
         }
 
+skip:
         emit_cache_params();
 }
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index c3250614e3ae..a86eaa9d75a5 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -83,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
          *
          * PMB entries are all pre-faulted.
          */
-        if (unlikely(size >= 0x1000000)) {
+        if (unlikely(phys_addr >= P1SEG)) {
                 unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
 
                 if (likely(mapped)) {
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index b1a714a92b14..aade31102112 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -33,6 +33,8 @@
 
 #define NR_PMB_ENTRIES  16
 
+static void __pmb_unmap(struct pmb_entry *);
+
 static struct kmem_cache *pmb_cache;
 static unsigned long pmb_map;
 
@@ -218,9 +220,10 @@ static struct {
 long pmb_remap(unsigned long vaddr, unsigned long phys,
                unsigned long size, unsigned long flags)
 {
-        struct pmb_entry *pmbp;
+        struct pmb_entry *pmbp, *pmbe;
         unsigned long wanted;
         int pmb_flags, i;
+        long err;
 
         /* Convert typical pgprot value to the PMB equivalent */
         if (flags & _PAGE_CACHABLE) {
@@ -236,20 +239,22 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 
 again:
         for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
-                struct pmb_entry *pmbe;
                 int ret;
 
                 if (size < pmb_sizes[i].size)
                         continue;
 
                 pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
-                if (IS_ERR(pmbe))
-                        return PTR_ERR(pmbe);
+                if (IS_ERR(pmbe)) {
+                        err = PTR_ERR(pmbe);
+                        goto out;
+                }
 
                 ret = set_pmb_entry(pmbe);
                 if (ret != 0) {
                         pmb_free(pmbe);
-                        return -EBUSY;
+                        err = -EBUSY;
+                        goto out;
                 }
 
                 phys    += pmb_sizes[i].size;
@@ -264,12 +269,25 @@ again:
                         pmbp->link = pmbe;
 
                 pmbp = pmbe;
+
+                /*
+                 * Instead of trying smaller sizes on every iteration
+                 * (even if we succeed in allocating space), try using
+                 * pmb_sizes[i].size again.
+                 */
+                i--;
         }
 
         if (size >= 0x1000000)
                 goto again;
 
         return wanted - size;
+
+out:
+        if (pmbp)
+                __pmb_unmap(pmbp);
+
+        return err;
 }
 
 void pmb_unmap(unsigned long addr)
@@ -283,12 +301,19 @@ void pmb_unmap(unsigned long addr)
         if (unlikely(!pmbe))
                 return;
 
+        __pmb_unmap(pmbe);
+}
+
+static void __pmb_unmap(struct pmb_entry *pmbe)
+{
         WARN_ON(!test_bit(pmbe->entry, &pmb_map));
 
         do {
                 struct pmb_entry *pmblink = pmbe;
 
-                clear_pmb_entry(pmbe);
+                if (pmbe->entry != PMB_NO_ENTRY)
+                        clear_pmb_entry(pmbe);
+
                 pmbe = pmblink->link;
 
                 pmb_free(pmblink);
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index ac45aab741a5..05ef5380a687 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,6 +26,7 @@ config SPARC
         select RTC_CLASS
         select RTC_DRV_M48T59
         select HAVE_PERF_EVENTS
+        select PERF_USE_VMALLOC
         select HAVE_DMA_ATTRS
         select HAVE_DMA_API_DEBUG
 
@@ -48,6 +49,7 @@ config SPARC64
         select RTC_DRV_SUN4V
         select RTC_DRV_STARFIRE
         select HAVE_PERF_EVENTS
+        select PERF_USE_VMALLOC
 
 config ARCH_DEFCONFIG
         string
diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
index 4f63ed8df551..162007643cdc 100644
--- a/arch/sparc/include/asm/hardirq_32.h
+++ b/arch/sparc/include/asm/hardirq_32.h
@@ -7,17 +7,7 @@
 #ifndef __SPARC_HARDIRQ_H
 #define __SPARC_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
-typedef struct {
-        unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
-
 #define HARDIRQ_BITS    8
+#include <asm-generic/hardirq.h>
 
 #endif /* __SPARC_HARDIRQ_H */
diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h
index ea43057d4763..cbf4801deaaf 100644
--- a/arch/sparc/include/asm/irq_32.h
+++ b/arch/sparc/include/asm/irq_32.h
@@ -6,10 +6,10 @@
 #ifndef _SPARC_IRQ_H
 #define _SPARC_IRQ_H
 
-#include <linux/interrupt.h>
-
 #define NR_IRQS    16
 
+#include <linux/interrupt.h>
+
 #define irq_canonicalize(irq)   (irq)
 
 extern void __init init_IRQ(void);
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 0ff92fa22064..f3cb790fa2ae 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -41,8 +41,8 @@
 #define LOW_OBP_ADDRESS         _AC(0x00000000f0000000,UL)
 #define HI_OBP_ADDRESS          _AC(0x0000000100000000,UL)
 #define VMALLOC_START           _AC(0x0000000100000000,UL)
-#define VMALLOC_END             _AC(0x0000000200000000,UL)
-#define VMEMMAP_BASE            _AC(0x0000000200000000,UL)
+#define VMALLOC_END             _AC(0x0000010000000000,UL)
+#define VMEMMAP_BASE            _AC(0x0000010000000000,UL)
 
 #define vmemmap                 ((struct page *)VMEMMAP_BASE)
 
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index 3ea6e8cde8c5..1d361477d7d6 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -280,8 +280,8 @@ kvmap_dtlb_nonlinear:
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
         /* Do not use the TSB for vmemmap.  */
-        mov             (VMEMMAP_BASE >> 24), %g5
-        sllx            %g5, 24, %g5
+        mov             (VMEMMAP_BASE >> 40), %g5
+        sllx            %g5, 40, %g5
         cmp             %g4,%g5
         bgeu,pn         %xcc, kvmap_vmemmap
          nop
@@ -293,8 +293,8 @@ kvmap_dtlb_tsbmiss:
         sethi           %hi(MODULES_VADDR), %g5
         cmp             %g4, %g5
         blu,pn          %xcc, kvmap_dtlb_longpath
-         mov            (VMALLOC_END >> 24), %g5
-        sllx            %g5, 24, %g5
+         mov            (VMALLOC_END >> 40), %g5
+        sllx            %g5, 40, %g5
         cmp             %g4, %g5
         bgeu,pn         %xcc, kvmap_dtlb_longpath
          nop
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index adf5f273868a..cb3c72c45aab 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1242,13 +1242,13 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
         snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
 
         err = request_irq(lp->cfg.rx_irq, ldc_rx,
-                          IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+                          IRQF_SAMPLE_RANDOM | IRQF_DISABLED | IRQF_SHARED,
                           lp->rx_irq_name, lp);
         if (err)
                 return err;
 
         err = request_irq(lp->cfg.tx_irq, ldc_tx,
-                          IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+                          IRQF_SAMPLE_RANDOM | IRQF_DISABLED | IRQF_SHARED,
                           lp->tx_irq_name, lp);
         if (err) {
                 free_irq(lp->cfg.rx_irq, lp);
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 2d6a1b10c81d..fa5936e1c3b9 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -56,7 +56,8 @@ struct cpu_hw_events {
         struct perf_event       *events[MAX_HWEVENTS];
         unsigned long           used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
         unsigned long           active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-        int enabled;
+        u64                     pcr;
+        int                     enabled;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
 
@@ -68,8 +69,30 @@ struct perf_event_map {
 #define PIC_LOWER       0x02
 };
 
+static unsigned long perf_event_encode(const struct perf_event_map *pmap)
+{
+        return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask;
+}
+
+static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk)
+{
+        *msk = val & 0xff;
+        *enc = val >> 16;
+}
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+#define CACHE_OP_UNSUPPORTED    0xfffe
+#define CACHE_OP_NONSENSE       0xffff
+
+typedef struct perf_event_map cache_map_t
+                                [PERF_COUNT_HW_CACHE_MAX]
+                                [PERF_COUNT_HW_CACHE_OP_MAX]
+                                [PERF_COUNT_HW_CACHE_RESULT_MAX];
+
 struct sparc_pmu {
         const struct perf_event_map     *(*event_map)(int);
+        const cache_map_t               *cache_map;
         int                             max_events;
         int                             upper_shift;
         int                             lower_shift;
@@ -80,21 +103,109 @@ struct sparc_pmu {
         int                             lower_nop;
 };
 
-static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+static const struct perf_event_map ultra3_perfmon_event_map[] = {
         [PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
         [PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
         [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
         [PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
 };
 
-static const struct perf_event_map *ultra3i_event_map(int event_id)
+static const struct perf_event_map *ultra3_event_map(int event_id)
 {
-        return &ultra3i_perfmon_event_map[event_id];
+        return &ultra3_perfmon_event_map[event_id];
 }
 
-static const struct sparc_pmu ultra3i_pmu = {
-        .event_map      = ultra3i_event_map,
-        .max_events     = ARRAY_SIZE(ultra3i_perfmon_event_map),
+static const cache_map_t ultra3_cache_map = {
+[C(L1D)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x09, PIC_UPPER, },
+        },
+        [C(OP_WRITE)] = {
+                [C(RESULT_ACCESS)] = { 0x0a, PIC_LOWER },
+                [C(RESULT_MISS)] = { 0x0a, PIC_UPPER },
+        },
+        [C(OP_PREFETCH)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(L1I)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x09, PIC_UPPER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(LL)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x0c, PIC_UPPER, },
+        },
+        [C(OP_WRITE)] = {
+                [C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER },
+                [C(RESULT_MISS)] = { 0x0c, PIC_UPPER },
+        },
+        [C(OP_PREFETCH)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(DTLB)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x12, PIC_UPPER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(ITLB)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x11, PIC_UPPER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(BPU)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+};
+
+static const struct sparc_pmu ultra3_pmu = {
+        .event_map      = ultra3_event_map,
+        .cache_map      = &ultra3_cache_map,
+        .max_events     = ARRAY_SIZE(ultra3_perfmon_event_map),
         .upper_shift    = 11,
         .lower_shift    = 4,
         .event_mask     = 0x3f,
@@ -102,6 +213,121 @@ static const struct sparc_pmu ultra3i_pmu = {
         .lower_nop      = 0x14,
 };
 
+/* Niagara1 is very limited.  The upper PIC is hard-locked to count
+ * only instructions, so it is free running which creates all kinds of
+ * problems.  Some hardware designs make one wonder if the creator
+ * even looked at how this stuff gets used by software.
+ */
+static const struct perf_event_map niagara1_perfmon_event_map[] = {
+        [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, PIC_UPPER },
+        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, PIC_UPPER },
+        [PERF_COUNT_HW_CACHE_REFERENCES] = { 0, PIC_NONE },
+        [PERF_COUNT_HW_CACHE_MISSES] = { 0x03, PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara1_event_map(int event_id)
+{
+        return &niagara1_perfmon_event_map[event_id];
+}
+
+static const cache_map_t niagara1_cache_map = {
+[C(L1D)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x03, PIC_LOWER, },
+        },
+        [C(OP_WRITE)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x03, PIC_LOWER, },
+        },
+        [C(OP_PREFETCH)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(L1I)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x00, PIC_UPPER },
+                [C(RESULT_MISS)] = { 0x02, PIC_LOWER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(LL)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x07, PIC_LOWER, },
+        },
+        [C(OP_WRITE)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x07, PIC_LOWER, },
+        },
+        [C(OP_PREFETCH)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(DTLB)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x05, PIC_LOWER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(ITLB)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x04, PIC_LOWER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(BPU)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+};
+
+static const struct sparc_pmu niagara1_pmu = {
+        .event_map      = niagara1_event_map,
+        .cache_map      = &niagara1_cache_map,
+        .max_events     = ARRAY_SIZE(niagara1_perfmon_event_map),
+        .upper_shift    = 0,
+        .lower_shift    = 4,
+        .event_mask     = 0x7,
+        .upper_nop      = 0x0,
+        .lower_nop      = 0x0,
+};
+
 static const struct perf_event_map niagara2_perfmon_event_map[] = {
         [PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
         [PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
@@ -116,14 +342,102 @@ static const struct perf_event_map *niagara2_event_map(int event_id)
         return &niagara2_perfmon_event_map[event_id];
 }
 
+static const cache_map_t niagara2_cache_map = {
+[C(L1D)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, },
+        },
+        [C(OP_WRITE)] = {
+                [C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, },
+        },
+        [C(OP_PREFETCH)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(L1I)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x02ff, PIC_UPPER | PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x0301, PIC_UPPER | PIC_LOWER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_NONSENSE },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(LL)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x0330, PIC_UPPER | PIC_LOWER, },
+        },
+        [C(OP_WRITE)] = {
+                [C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, },
+                [C(RESULT_MISS)] = { 0x0320, PIC_UPPER | PIC_LOWER, },
+        },
+        [C(OP_PREFETCH)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(DTLB)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0x0b08, PIC_UPPER | PIC_LOWER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(ITLB)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { 0xb04, PIC_UPPER | PIC_LOWER, },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+[C(BPU)] = {
+        [C(OP_READ)] = {
+                [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+                [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_WRITE) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+        [ C(OP_PREFETCH) ] = {
+                [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+                [ C(RESULT_MISS)   ] = { CACHE_OP_UNSUPPORTED },
+        },
+},
+};
+
 static const struct sparc_pmu niagara2_pmu = {
         .event_map      = niagara2_event_map,
+        .cache_map      = &niagara2_cache_map,
         .max_events     = ARRAY_SIZE(niagara2_perfmon_event_map),
         .upper_shift    = 19,
         .lower_shift    = 6,
         .event_mask     = 0xfff,
         .hv_bit         = 0x8,
-        .irq_bit        = 0x03,
+        .irq_bit        = 0x30,
         .upper_nop      = 0x220,
         .lower_nop      = 0x220,
 };
@@ -151,23 +465,30 @@ static u64 nop_for_index(int idx)
                               sparc_pmu->lower_nop, idx);
 }
 
-static inline void sparc_pmu_enable_event(struct hw_perf_event *hwc,
-                                            int idx)
+static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
 {
         u64 val, mask = mask_for_index(idx);
 
-        val = pcr_ops->read();
-        pcr_ops->write((val & ~mask) | hwc->config);
+        val = cpuc->pcr;
+        val &= ~mask;
+        val |= hwc->config;
+        cpuc->pcr = val;
+
+        pcr_ops->write(cpuc->pcr);
 }
 
-static inline void sparc_pmu_disable_event(struct hw_perf_event *hwc,
-                                             int idx)
+static inline void sparc_pmu_disable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
 {
         u64 mask = mask_for_index(idx);
         u64 nop = nop_for_index(idx);
-        u64 val = pcr_ops->read();
+        u64 val;
 
-        pcr_ops->write((val & ~mask) | nop);
+        val = cpuc->pcr;
+        val &= ~mask;
+        val |= nop;
+        cpuc->pcr = val;
+
+        pcr_ops->write(cpuc->pcr);
 }
 
 void hw_perf_enable(void)
@@ -182,7 +503,7 @@ void hw_perf_enable(void)
         cpuc->enabled = 1;
         barrier();
 
-        val = pcr_ops->read();
+        val = cpuc->pcr;
 
         for (i = 0; i < MAX_HWEVENTS; i++) {
                 struct perf_event *cp = cpuc->events[i];
@@ -194,7 +515,9 @@ void hw_perf_enable(void)
                 val |= hwc->config_base;
         }
 
-        pcr_ops->write(val);
+        cpuc->pcr = val;
+
+        pcr_ops->write(cpuc->pcr);
 }
 
 void hw_perf_disable(void)
@@ -207,10 +530,12 @@ void hw_perf_disable(void)
 
         cpuc->enabled = 0;
 
-        val = pcr_ops->read();
+        val = cpuc->pcr;
         val &= ~(PCR_UTRACE | PCR_STRACE |
                  sparc_pmu->hv_bit | sparc_pmu->irq_bit);
-        pcr_ops->write(val);
+        cpuc->pcr = val;
+
+        pcr_ops->write(cpuc->pcr);
 }
 
 static u32 read_pmc(int idx)
@@ -242,7 +567,7 @@ static void write_pmc(int idx, u64 val)
 }
 
 static int sparc_perf_event_set_period(struct perf_event *event,
-                                         struct hw_perf_event *hwc, int idx)
+                                       struct hw_perf_event *hwc, int idx)
 {
         s64 left = atomic64_read(&hwc->period_left);
         s64 period = hwc->sample_period;
@@ -282,19 +607,19 @@ static int sparc_pmu_enable(struct perf_event *event)
         if (test_and_set_bit(idx, cpuc->used_mask))
                 return -EAGAIN;
 
-        sparc_pmu_disable_event(hwc, idx);
+        sparc_pmu_disable_event(cpuc, hwc, idx);
 
         cpuc->events[idx] = event;
         set_bit(idx, cpuc->active_mask);
 
         sparc_perf_event_set_period(event, hwc, idx);
-        sparc_pmu_enable_event(hwc, idx);
+        sparc_pmu_enable_event(cpuc, hwc, idx);
         perf_event_update_userpage(event);
         return 0;
 }
 
 static u64 sparc_perf_event_update(struct perf_event *event,
-                                     struct hw_perf_event *hwc, int idx)
+                                   struct hw_perf_event *hwc, int idx)
 {
         int shift = 64 - 32;
         u64 prev_raw_count, new_raw_count;
@@ -324,7 +649,7 @@ static void sparc_pmu_disable(struct perf_event *event)
         int idx = hwc->idx;
 
         clear_bit(idx, cpuc->active_mask);
-        sparc_pmu_disable_event(hwc, idx);
+        sparc_pmu_disable_event(cpuc, hwc, idx);
 
         barrier();
 
@@ -338,18 +663,29 @@ static void sparc_pmu_disable(struct perf_event *event)
 static void sparc_pmu_read(struct perf_event *event)
 {
         struct hw_perf_event *hwc = &event->hw;
+
         sparc_perf_event_update(event, hwc, hwc->idx);
 }
 
 static void sparc_pmu_unthrottle(struct perf_event *event)
 {
+        struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
         struct hw_perf_event *hwc = &event->hw;
-        sparc_pmu_enable_event(hwc, hwc->idx);
+
+        sparc_pmu_enable_event(cpuc, hwc, hwc->idx);
 }
 
 static atomic_t active_events = ATOMIC_INIT(0);
 static DEFINE_MUTEX(pmc_grab_mutex);
 
+static void perf_stop_nmi_watchdog(void *unused)
+{
+        struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+        stop_nmi_watchdog(NULL);
+        cpuc->pcr = pcr_ops->read();
+}
+
 void perf_event_grab_pmc(void)
 {
         if (atomic_inc_not_zero(&active_events))
@@ -358,7 +694,7 @@ void perf_event_grab_pmc(void)
         mutex_lock(&pmc_grab_mutex);
         if (atomic_read(&active_events) == 0) {
                 if (atomic_read(&nmi_active) > 0) {
-                        on_each_cpu(stop_nmi_watchdog, NULL, 1);
+                        on_each_cpu(perf_stop_nmi_watchdog, NULL, 1);
                         BUG_ON(atomic_read(&nmi_active) != 0);
                 }
                 atomic_inc(&active_events);
@@ -375,30 +711,160 @@ void perf_event_release_pmc(void)
         }
 }
 
+static const struct perf_event_map *sparc_map_cache_event(u64 config)
+{
+        unsigned int cache_type, cache_op, cache_result;
+        const struct perf_event_map *pmap;
+
+        if (!sparc_pmu->cache_map)
+                return ERR_PTR(-ENOENT);
+
+        cache_type = (config >>  0) & 0xff;
+        if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+                return ERR_PTR(-EINVAL);
+
+        cache_op = (config >>  8) & 0xff;
+        if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+                return ERR_PTR(-EINVAL);
+
+        cache_result = (config >> 16) & 0xff;
+        if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+                return ERR_PTR(-EINVAL);
+
+        pmap = &((*sparc_pmu->cache_map)[cache_type][cache_op][cache_result]);
+
+        if (pmap->encoding == CACHE_OP_UNSUPPORTED)
+                return ERR_PTR(-ENOENT);
+
+        if (pmap->encoding == CACHE_OP_NONSENSE)
+                return ERR_PTR(-EINVAL);
+
+        return pmap;
+}
+
 static void hw_perf_event_destroy(struct perf_event *event)
 {
         perf_event_release_pmc();
 }
 
+/* Make sure all events can be scheduled into the hardware at
+ * the same time.  This is simplified by the fact that we only
+ * need to support 2 simultaneous HW events.
+ */
+static int sparc_check_constraints(unsigned long *events, int n_ev)
+{
+        if (n_ev <= perf_max_events) {
+                u8 msk1, msk2;
+                u16 dummy;
+
+                if (n_ev == 1)
+                        return 0;
+                BUG_ON(n_ev != 2);
+                perf_event_decode(events[0], &dummy, &msk1);
+                perf_event_decode(events[1], &dummy, &msk2);
+
+                /* If both events can go on any counter, OK.  */
+                if (msk1 == (PIC_UPPER | PIC_LOWER) &&
+                    msk2 == (PIC_UPPER | PIC_LOWER))
+                        return 0;
+
+                /* If one event is limited to a specific counter,
+                 * and the other can go on both, OK.
+                 */
+                if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
+                    msk2 == (PIC_UPPER | PIC_LOWER))
+                        return 0;
+                if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) &&
+                    msk1 == (PIC_UPPER | PIC_LOWER))
+                        return 0;
+
+                /* If the events are fixed to different counters, OK.  */
+                if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) ||
+                    (msk1 == PIC_LOWER && msk2 == PIC_UPPER))
+                        return 0;
+
+                /* Otherwise, there is a conflict.  */
+        }
+
+        return -1;
+}
+
+static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
+{
+        int eu = 0, ek = 0, eh = 0;
+        struct perf_event *event;
+        int i, n, first;
+
+        n = n_prev + n_new;
+        if (n <= 1)
+                return 0;
+
+        first = 1;
+        for (i = 0; i < n; i++) {
+                event = evts[i];
+                if (first) {
+                        eu = event->attr.exclude_user;
+                        ek = event->attr.exclude_kernel;
+                        eh = event->attr.exclude_hv;
+                        first = 0;
+                } else if (event->attr.exclude_user != eu ||
+                           event->attr.exclude_kernel != ek ||
+                           event->attr.exclude_hv != eh) {
+                        return -EAGAIN;
+                }
+        }
+
+        return 0;
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+                          struct perf_event *evts[], unsigned long *events)
+{
+        struct perf_event *event;
+        int n = 0;
+
+        if (!is_software_event(group)) {
+                if (n >= max_count)
+                        return -1;
+                evts[n] = group;
+                events[n++] = group->hw.event_base;
+        }
+        list_for_each_entry(event, &group->sibling_list, group_entry) {
+                if (!is_software_event(event) &&
+                    event->state != PERF_EVENT_STATE_OFF) {
+                        if (n >= max_count)
+                                return -1;
+                        evts[n] = event;
+                        events[n++] = event->hw.event_base;
+                }
+        }
+        return n;
+}
+
 static int __hw_perf_event_init(struct perf_event *event)
 {
         struct perf_event_attr *attr = &event->attr;
+        struct perf_event *evts[MAX_HWEVENTS];
         struct hw_perf_event *hwc = &event->hw;
+        unsigned long events[MAX_HWEVENTS];
         const struct perf_event_map *pmap;
         u64 enc;
+        int n;
 
         if (atomic_read(&nmi_active) < 0)
                 return -ENODEV;
 
-        if (attr->type != PERF_TYPE_HARDWARE)
+        if (attr->type == PERF_TYPE_HARDWARE) {
+                if (attr->config >= sparc_pmu->max_events)
+                        return -EINVAL;
+                pmap = sparc_pmu->event_map(attr->config);
+        } else if (attr->type == PERF_TYPE_HW_CACHE) {
+                pmap = sparc_map_cache_event(attr->config);
+                if (IS_ERR(pmap))
+                        return PTR_ERR(pmap);
+        } else
                 return -EOPNOTSUPP;
 
-        if (attr->config >= sparc_pmu->max_events)
-                return -EINVAL;
-
-        perf_event_grab_pmc();
-        event->destroy = hw_perf_event_destroy;
-
         /* We save the enable bits in the config_base.  So to
          * turn off sampling just write 'config', and to enable
          * things write 'config | config_base'.
@@ -411,15 +877,39 @@ static int __hw_perf_event_init(struct perf_event *event)
         if (!attr->exclude_hv)
                 hwc->config_base |= sparc_pmu->hv_bit;
 
+        hwc->event_base = perf_event_encode(pmap);
+
+        enc = pmap->encoding;
+
+        n = 0;
+        if (event->group_leader != event) {
+                n = collect_events(event->group_leader,
+                                   perf_max_events - 1,
+                                   evts, events);
+                if (n < 0)
+                        return -EINVAL;
+        }
+        events[n] = hwc->event_base;
+        evts[n] = event;
+
+        if (check_excludes(evts, n, 1))
+                return -EINVAL;
+
+        if (sparc_check_constraints(events, n + 1))
+                return -EINVAL;
+
+        /* Try to do all error checking before this point, as unwinding
+         * state after grabbing the PMC is difficult.
+         */
+        perf_event_grab_pmc();
+        event->destroy = hw_perf_event_destroy;
+
         if (!hwc->sample_period) {
                 hwc->sample_period = MAX_PERIOD;
                 hwc->last_period = hwc->sample_period;
                 atomic64_set(&hwc->period_left, hwc->sample_period);
         }
 
-        pmap = sparc_pmu->event_map(attr->config);
-
-        enc = pmap->encoding;
         if (pmap->pic_mask & PIC_UPPER) {
                 hwc->idx = PIC_UPPER_INDEX;
                 enc <<= sparc_pmu->upper_shift;
@@ -472,7 +962,7 @@ void perf_event_print_debug(void)
 }
 
 static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
-                                              unsigned long cmd, void *__args)
+                                            unsigned long cmd, void *__args)
 {
         struct die_args *args = __args;
         struct perf_sample_data data;
@@ -513,7 +1003,7 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
                         continue;
 
                 if (perf_event_overflow(event, 1, &data, regs))
-                        sparc_pmu_disable_event(hwc, idx);
+                        sparc_pmu_disable_event(cpuc, hwc, idx);
         }
 
         return NOTIFY_STOP;
@@ -525,8 +1015,15 @@ static __read_mostly struct notifier_block perf_event_nmi_notifier = {
 
 static bool __init supported_pmu(void)
 {
-        if (!strcmp(sparc_pmu_type, "ultra3i")) {
-                sparc_pmu = &ultra3i_pmu;
+        if (!strcmp(sparc_pmu_type, "ultra3") ||
+            !strcmp(sparc_pmu_type, "ultra3+") ||
+            !strcmp(sparc_pmu_type, "ultra3i") ||
+            !strcmp(sparc_pmu_type, "ultra4+")) {
+                sparc_pmu = &ultra3_pmu;
+                return true;
+        }
+        if (!strcmp(sparc_pmu_type, "niagara")) {
+                sparc_pmu = &niagara1_pmu;
                 return true;
         }
         if (!strcmp(sparc_pmu_type, "niagara2")) {
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index a70a5e1904d9..1886d37d411b 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -265,7 +265,7 @@ static void flush_dcache(unsigned long pfn)
         struct page *page;
 
         page = pfn_to_page(pfn);
-        if (page && page_mapping(page)) {
+        if (page) {
                 unsigned long pg_flags;
 
                 pg_flags = page->flags;
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index f97cb8b6ee5f..f9024bccff16 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -11,6 +11,7 @@
 #include <linux/oprofile.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/param.h>        /* for HZ */
  
 #ifdef CONFIG_SPARC64
 #include <linux/notifier.h>
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 14a102e877d6..cf8a97f34518 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -5,6 +5,7 @@
 
 #include "linux/irqreturn.h"
 #include "linux/kd.h"
+#include "linux/sched.h"
 #include "chan_kern.h"
 #include "irq_kern.h"
 #include "irq_user.h"
diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c
index 19930081d3d8..4ebc8a34738f 100644
--- a/arch/um/drivers/port_kern.c
+++ b/arch/um/drivers/port_kern.c
@@ -7,6 +7,7 @@
 #include "linux/interrupt.h"
 #include "linux/list.h"
 #include "linux/mutex.h"
+#include "linux/workqueue.h"
 #include "asm/atomic.h"
 #include "init.h"
 #include "irq_kern.h"
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 454cdb43e351..039270b9b73b 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -10,6 +10,7 @@
 #include "linux/interrupt.h"
 #include "linux/kernel_stat.h"
 #include "linux/module.h"
+#include "linux/sched.h"
 #include "linux/seq_file.h"
 #include "as-layout.h"
 #include "kern_util.h"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8da93745c087..07e01149e3bf 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -86,10 +86,6 @@ config STACKTRACE_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
         def_bool y
 
-config FAST_CMPXCHG_LOCAL
-        bool
-        default y
-
 config MMU
         def_bool y
 
@@ -495,7 +491,7 @@ if PARAVIRT_GUEST
 source "arch/x86/xen/Kconfig"
 
 config VMI
-        bool "VMI Guest support"
+        bool "VMI Guest support (DEPRECATED)"
         select PARAVIRT
         depends on X86_32
         ---help---
@@ -504,6 +500,15 @@ config VMI
           at the moment), by linking the kernel to a GPL-ed ROM module
           provided by the hypervisor.
 
+          As of September 2009, VMware has started a phased retirement
+          of this feature from VMware's products. Please see
+          feature-removal-schedule.txt for details.  If you are
+          planning to enable this option, please note that you cannot
+          live migrate a VMI enabled VM to a future VMware product,
+          which doesn't support VMI. So if you expect your kernel to
+          seamlessly migrate to newer VMware products, keep this
+          disabled.
+
 config KVM_CLOCK
         bool "KVM paravirtualized clock"
         select PARAVIRT
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 527519b8a9f9..f2824fb8c79c 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -400,7 +400,7 @@ config X86_TSC
 
 config X86_CMPXCHG64
         def_bool y
-        depends on X86_PAE || X86_64
+        depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM
 
 # this should be set for all -march=.. options where the compiler
 # generates cmov.
@@ -412,6 +412,7 @@ config X86_MINIMUM_CPU_FAMILY
         int
         default "64" if X86_64
         default "6" if X86_32 && X86_P6_NOP
+        default "5" if X86_32 && X86_CMPXCHG64
         default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
         default "3"
 
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index 0f6ec455a2b1..03c0683636b6 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -53,6 +53,9 @@ SECTIONS
 
         /DISCARD/ : { *(.note*) }
 
+        /*
+         * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+         */
         . = ASSERT(_end <= 0x8000, "Setup too big!");
         . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
         /* Necessary for the very-old-loader check to work... */
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 585edebe12cf..49c552c060e9 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -82,7 +82,7 @@ static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx,
                 return -EINVAL;
         }
 
-        if (irq_fpu_usable())
+        if (!irq_fpu_usable())
                 err = crypto_aes_expand_key(ctx, in_key, key_len);
         else {
                 kernel_fpu_begin();
@@ -103,7 +103,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
         struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-        if (irq_fpu_usable())
+        if (!irq_fpu_usable())
                 crypto_aes_encrypt_x86(ctx, dst, src);
         else {
                 kernel_fpu_begin();
@@ -116,7 +116,7 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
         struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-        if (irq_fpu_usable())
+        if (!irq_fpu_usable())
                 crypto_aes_decrypt_x86(ctx, dst, src);
         else {
                 kernel_fpu_begin();
@@ -342,7 +342,7 @@ static int ablk_encrypt(struct ablkcipher_request *req)
         struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
         struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-        if (irq_fpu_usable()) {
+        if (!irq_fpu_usable()) {
                 struct ablkcipher_request *cryptd_req =
                         ablkcipher_request_ctx(req);
                 memcpy(cryptd_req, req, sizeof(*req));
@@ -363,7 +363,7 @@ static int ablk_decrypt(struct ablkcipher_request *req)
         struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
         struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-        if (irq_fpu_usable()) {
+        if (!irq_fpu_usable()) {
                 struct ablkcipher_request *cryptd_req =
                         ablkcipher_request_ctx(req);
                 memcpy(cryptd_req, req, sizeof(*req));
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 74619c4f9fda..1733f9f65e82 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -21,8 +21,8 @@
 #define __AUDIT_ARCH_LE    0x40000000
 
 #ifndef CONFIG_AUDITSYSCALL
-#define sysexit_audit int_ret_from_sys_call
-#define sysretl_audit int_ret_from_sys_call
+#define sysexit_audit ia32_ret_from_sys_call
+#define sysretl_audit ia32_ret_from_sys_call
 #endif
 
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
@@ -39,12 +39,12 @@
         .endm 
 
         /* clobbers %eax */     
-        .macro  CLEAR_RREGS _r9=rax
+        .macro  CLEAR_RREGS offset=0, _r9=rax
         xorl    %eax,%eax
-        movq    %rax,R11(%rsp)
-        movq    %rax,R10(%rsp)
-        movq    %\_r9,R9(%rsp)
-        movq    %rax,R8(%rsp)
+        movq    %rax,\offset+R11(%rsp)
+        movq    %rax,\offset+R10(%rsp)
+        movq    %\_r9,\offset+R9(%rsp)
+        movq    %rax,\offset+R8(%rsp)
         .endm
 
         /*
@@ -172,6 +172,10 @@ sysexit_from_sys_call:
         movl    RIP-R11(%rsp),%edx              /* User %eip */
         CFI_REGISTER rip,rdx
         RESTORE_ARGS 1,24,1,1,1,1
+        xorq    %r8,%r8
+        xorq    %r9,%r9
+        xorq    %r10,%r10
+        xorq    %r11,%r11
         popfq
         CFI_ADJUST_CFA_OFFSET -8
         /*CFI_RESTORE rflags*/
@@ -202,7 +206,7 @@ sysexit_from_sys_call:
 
         .macro auditsys_exit exit,ebpsave=RBP
         testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
-        jnz int_ret_from_sys_call
+        jnz ia32_ret_from_sys_call
         TRACE_IRQS_ON
         sti
         movl %eax,%esi          /* second arg, syscall return value */
@@ -218,8 +222,9 @@ sysexit_from_sys_call:
         cli
         TRACE_IRQS_OFF
         testl %edi,TI_flags(%r10)
-        jnz int_with_check
-        jmp \exit
+        jz \exit
+        CLEAR_RREGS -ARGOFFSET
+        jmp int_with_check
         .endm
 
 sysenter_auditsys:
@@ -329,6 +334,9 @@ sysretl_from_sys_call:
         CFI_REGISTER rip,rcx
         movl EFLAGS-ARGOFFSET(%rsp),%r11d       
         /*CFI_REGISTER rflags,r11*/
+        xorq    %r10,%r10
+        xorq    %r9,%r9
+        xorq    %r8,%r8
         TRACE_IRQS_ON
         movl RSP-ARGOFFSET(%rsp),%esp
         CFI_RESTORE rsp
@@ -353,7 +361,7 @@ cstar_tracesys:
 #endif
         xchgl %r9d,%ebp
         SAVE_REST
-        CLEAR_RREGS r9
+        CLEAR_RREGS 0, r9
         movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
         movq %rsp,%rdi        /* &pt_regs -> arg1 */
         call syscall_trace_enter
@@ -425,6 +433,8 @@ ia32_do_call:
         call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
 ia32_sysret:
         movq %rax,RAX-ARGOFFSET(%rsp)
+ia32_ret_from_sys_call:
+        CLEAR_RREGS -ARGOFFSET
         jmp int_ret_from_sys_call 
 
 ia32_tracesys:                   
@@ -442,8 +452,8 @@ END(ia32_syscall)
 
 ia32_badsys:
         movq $0,ORIG_RAX-ARGOFFSET(%rsp)
-        movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
-        jmp int_ret_from_sys_call
+        movq $-ENOSYS,%rax
+        jmp ia32_sysret
 
 quiet_ni_syscall:
         movq $-ENOSYS,%rax
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 3be000435fad..d83892226f73 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -796,6 +796,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
 int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index b608a64c5814..f1363b72364f 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -133,6 +133,8 @@ static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
 static inline void enable_p5_mce(void) {}
 #endif
 
+extern void (*x86_mce_decode_callback)(struct mce *m);
+
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 8aebcc41041d..efb38994859c 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -840,42 +840,22 @@ static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
 
 static inline unsigned long __raw_local_save_flags(void)
 {
-        unsigned long f;
-
-        asm volatile(paravirt_alt(PARAVIRT_CALL)
-                     : "=a"(f)
-                     : paravirt_type(pv_irq_ops.save_fl),
-                       paravirt_clobber(CLBR_EAX)
-                     : "memory", "cc");
-        return f;
+        return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
 }
 
 static inline void raw_local_irq_restore(unsigned long f)
 {
-        asm volatile(paravirt_alt(PARAVIRT_CALL)
-                     : "=a"(f)
-                     : PV_FLAGS_ARG(f),
-                       paravirt_type(pv_irq_ops.restore_fl),
-                       paravirt_clobber(CLBR_EAX)
-                     : "memory", "cc");
+        PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
 }
 
 static inline void raw_local_irq_disable(void)
 {
-        asm volatile(paravirt_alt(PARAVIRT_CALL)
-                     :
-                     : paravirt_type(pv_irq_ops.irq_disable),
-                       paravirt_clobber(CLBR_EAX)
-                     : "memory", "eax", "cc");
+        PVOP_VCALLEE0(pv_irq_ops.irq_disable);
 }
 
 static inline void raw_local_irq_enable(void)
 {
-        asm volatile(paravirt_alt(PARAVIRT_CALL)
-                     :
-                     : paravirt_type(pv_irq_ops.irq_enable),
-                       paravirt_clobber(CLBR_EAX)
-                     : "memory", "eax", "cc");
+        PVOP_VCALLEE0(pv_irq_ops.irq_enable);
 }
 
 static inline unsigned long __raw_local_irq_save(void)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index dd0f5b32489d..9357473c8da0 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -494,10 +494,11 @@ int paravirt_disable_iospace(void);
 #define EXTRA_CLOBBERS
 #define VEXTRA_CLOBBERS
 #else  /* CONFIG_X86_64 */
+/* [re]ax isn't an arg, but the return val */
 #define PVOP_VCALL_ARGS                                 \
         unsigned long __edi = __edi, __esi = __esi,     \
-                __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS          PVOP_VCALL_ARGS, __eax
+                __edx = __edx, __ecx = __ecx, __eax = __eax
+#define PVOP_CALL_ARGS          PVOP_VCALL_ARGS
 
 #define PVOP_CALL_ARG1(x)               "D" ((unsigned long)(x))
 #define PVOP_CALL_ARG2(x)               "S" ((unsigned long)(x))
@@ -509,6 +510,7 @@ int paravirt_disable_iospace(void);
                                 "=c" (__ecx)
 #define PVOP_CALL_CLOBBERS      PVOP_VCALL_CLOBBERS, "=a" (__eax)
 
+/* void functions are still allowed [re]ax for scratch */
 #define PVOP_VCALLEE_CLOBBERS   "=a" (__eax)
 #define PVOP_CALLEE_CLOBBERS    PVOP_VCALLEE_CLOBBERS
 
@@ -583,8 +585,8 @@ int paravirt_disable_iospace(void);
                        VEXTRA_CLOBBERS,                                 \
                        pre, post, ##__VA_ARGS__)
 
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)                 \
-        ____PVOP_CALL(rettype, op.func, CLBR_RET_REG,                   \
+#define __PVOP_VCALLEESAVE(op, pre, post, ...)                          \
+        ____PVOP_VCALL(op.func, CLBR_RET_REG,                           \
                       PVOP_VCALLEE_CLOBBERS, ,                          \
                       pre, post, ##__VA_ARGS__)
 
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 25a92842dd99..d823c245f63b 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -143,6 +143,7 @@ extern unsigned long node_remap_size[];
                                 | 1*SD_BALANCE_FORK                     \
                                 | 0*SD_BALANCE_WAKE                     \
                                 | 1*SD_WAKE_AFFINE                      \
+                                | 1*SD_PREFER_LOCAL                     \
                                 | 0*SD_SHARE_CPUPOWER                   \
                                 | 0*SD_POWERSAVINGS_BALANCE             \
                                 | 0*SD_SHARE_PKG_RESOURCES              \
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 04eb6c958b9d..d1414af98559 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -19,6 +19,8 @@
 #include <asm/types.h>
 #include <asm/percpu.h>
 #include <asm/uv/uv_mmrs.h>
+#include <asm/irq_vectors.h>
+#include <asm/io_apic.h>
 
 
 /*
@@ -114,7 +116,7 @@
 /*
  * The largest possible NASID of a C or M brick (+ 2)
  */
-#define UV_MAX_NASID_VALUE      (UV_MAX_NUMALINK_NODES * 2)
+#define UV_MAX_NASID_VALUE      (UV_MAX_NUMALINK_BLADES * 2)
 
 struct uv_scir_s {
         struct timer_list timer;
@@ -230,6 +232,20 @@ static inline unsigned long uv_gpa(void *v)
         return uv_soc_phys_ram_to_gpa(__pa(v));
 }
 
+/* gnode -> pnode */
+static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
+{
+        return gpa >> uv_hub_info->m_val;
+}
+
+/* gpa -> pnode */
+static inline int uv_gpa_to_pnode(unsigned long gpa)
+{
+        unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1;
+
+        return uv_gpa_to_gnode(gpa) & n_mask;
+}
+
 /* pnode, offset --> socket virtual */
 static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
 {
@@ -421,9 +437,14 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
 static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
 {
         unsigned long val;
+        unsigned long dmode = dest_Fixed;
+
+        if (vector == NMI_VECTOR)
+                dmode = dest_NMI;
 
         val = (1UL << UVH_IPI_INT_SEND_SHFT) |
                         ((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
+                        (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
                         (vector << UVH_IPI_INT_VECTOR_SHFT);
         uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 7da00b799cda..060fff8f5c5b 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -57,5 +57,8 @@ SECTIONS
                 *(.note*)
         }
 
+        /*
+         * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+         */
         . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
 }
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index f5f5886a6b53..326c25477d3d 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -352,14 +352,14 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 
         for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
                 alias.v = uv_read_local_mmr(redir_addrs[i].alias);
-                if (alias.s.base == 0) {
+                if (alias.s.enable && alias.s.base == 0) {
                         *size = (1UL << alias.s.m_alias);
                         redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
                         *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
                         return;
                 }
         }
-        BUG();
+        *base = *size = 0;
 }
 
 enum map_type {map_wb, map_uc};
@@ -619,12 +619,12 @@ void __init uv_system_init(void)
                 uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
                 uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
                 uv_cpu_hub_info(cpu)->m_val = m_val;
-                uv_cpu_hub_info(cpu)->n_val = m_val;
+                uv_cpu_hub_info(cpu)->n_val = n_val;
                 uv_cpu_hub_info(cpu)->numa_blade_id = blade;
                 uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
                 uv_cpu_hub_info(cpu)->pnode = pnode;
                 uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
-                uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+                uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
                 uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
                 uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
                 uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 183c3457d2f4..721a77ca8115 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -85,6 +85,18 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int                      cpu_missing;
 
+static void default_decode_mce(struct mce *m)
+{
+        pr_emerg("No human readable MCE decoding support on this CPU type.\n");
+        pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+}
+
+/*
+ * CPU/chipset specific EDAC code can register a callback here to print
+ * MCE errors in a human-readable form:
+ */
+void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce;
+EXPORT_SYMBOL(x86_mce_decode_callback);
 
 /* MCA banks polled by the period polling timer for corrected events */
 DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
@@ -165,46 +177,46 @@ void mce_log(struct mce *mce)
         set_bit(0, &mce_need_notify);
 }
 
-void __weak decode_mce(struct mce *m)
-{
-        return;
-}
-
 static void print_mce(struct mce *m)
 {
-        printk(KERN_EMERG
-               "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+        pr_emerg("CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
                m->extcpu, m->mcgstatus, m->bank, m->status);
+
         if (m->ip) {
-                printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
-                       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
-                       m->cs, m->ip);
+                pr_emerg("RIP%s %02x:<%016Lx> ",
+                        !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
+                                m->cs, m->ip);
+
                 if (m->cs == __KERNEL_CS)
                         print_symbol("{%s}", m->ip);
-                printk(KERN_CONT "\n");
+                pr_cont("\n");
         }
-        printk(KERN_EMERG "TSC %llx ", m->tsc);
+
+        pr_emerg("TSC %llx ", m->tsc);
         if (m->addr)
-                printk(KERN_CONT "ADDR %llx ", m->addr);
+                pr_cont("ADDR %llx ", m->addr);
         if (m->misc)
-                printk(KERN_CONT "MISC %llx ", m->misc);
-        printk(KERN_CONT "\n");
-        printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
-                        m->cpuvendor, m->cpuid, m->time, m->socketid,
-                        m->apicid);
+                pr_cont("MISC %llx ", m->misc);
 
-        decode_mce(m);
+        pr_cont("\n");
+        pr_emerg("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+                m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid);
+
+        /*
+         * Print out human-readable details about the MCE error,
+         * (if the CPU has an implementation for that):
+         */
+        x86_mce_decode_callback(m);
 }
 
 static void print_mce_head(void)
 {
-        printk(KERN_EMERG "\nHARDWARE ERROR\n");
+        pr_emerg("\nHARDWARE ERROR\n");
 }
 
 static void print_mce_tail(void)
 {
-        printk(KERN_EMERG "This is not a software problem!\n"
-               "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+        pr_emerg("This is not a software problem!\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -218,6 +230,7 @@ static atomic_t mce_fake_paniced;
 static void wait_for_panic(void)
 {
         long timeout = PANIC_TIMEOUT*USEC_PER_SEC;
+
         preempt_disable();
         local_irq_enable();
         while (timeout-- > 0)
@@ -285,6 +298,7 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 static int msr_to_offset(u32 msr)
 {
         unsigned bank = __get_cpu_var(injectm.bank);
+
         if (msr == rip_msr)
                 return offsetof(struct mce, ip);
         if (msr == MSR_IA32_MCx_STATUS(bank))
@@ -1200,7 +1214,8 @@ static int __cpuinit mce_cap_init(void)
         rdmsrl(MSR_IA32_MCG_CAP, cap);
 
         b = cap & MCG_BANKCNT_MASK;
-        printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+        if (!banks)
+                printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
 
         if (b > MAX_NR_BANKS) {
                 printk(KERN_WARNING
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 889f665fe93d..7c785634af2b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
+#include <linux/sched.h>
 #include <asm/apic.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index f04e72527604..3c1b12d461d1 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -96,17 +96,24 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
         unsigned long long base, size;
         char *ptr;
         char line[LINE_SIZE];
+        int length;
         size_t linelen;
 
         if (!capable(CAP_SYS_ADMIN))
                 return -EPERM;
-        if (!len)
-                return -EINVAL;
 
         memset(line, 0, LINE_SIZE);
-        if (len > LINE_SIZE)
-                len = LINE_SIZE;
-        if (copy_from_user(line, buf, len - 1))
+
+        length = len;
+        length--;
+
+        if (length > LINE_SIZE - 1)
+                length = LINE_SIZE - 1;
+
+        if (length < 0)
+                return -EINVAL;
+
+        if (copy_from_user(line, buf, length))
                 return -EFAULT;
 
         linelen = strlen(line);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 85419bb7d4ab..d17d482a04f4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1378,8 +1378,8 @@ static unsigned long ram_alignment(resource_size_t pos)
         if (mb < 16)
                 return 1024*1024;
 
-        /* To 32MB for anything above that */
-        return 32*1024*1024;
+        /* To 64MB for anything above that */
+        return 64*1024*1024;
 }
 
 #define MAX_RESOURCE_SIZE ((resource_size_t)-1)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 41fd965c80c6..b9c830c12b4a 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -206,8 +206,11 @@ static int __init setup_early_printk(char *buf)
 
         while (*buf != '\0') {
                 if (!strncmp(buf, "serial", 6)) {
-                        early_serial_init(buf + 6);
+                        buf += 6;
+                        early_serial_init(buf);
                         early_console_register(&early_serial_console, keep);
+                        if (!strncmp(buf, ",ttyS", 5))
+                                buf += 5;
                 }
                 if (!strncmp(buf, "ttyS", 4)) {
                         early_serial_init(buf + 4);
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 1736c5a725aa..9c3bd4a2050e 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -15,8 +15,10 @@ EXPORT_SYMBOL(mcount);
  * the export, but dont use it from C code, it is used
  * by assembly code and is not using C calling convention!
  */
+#ifndef CONFIG_X86_CMPXCHG64
 extern void cmpxchg8b_emu(void);
 EXPORT_SYMBOL(cmpxchg8b_emu);
+#endif
 
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 74656d1d4e30..04bbd5278568 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -63,10 +63,10 @@ static int show_other_interrupts(struct seq_file *p, int prec)
         for_each_online_cpu(j)
                 seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count);
         seq_printf(p, "  Spurious interrupts\n");
-        seq_printf(p, "%*s: ", prec, "CNT");
+        seq_printf(p, "%*s: ", prec, "PMI");
         for_each_online_cpu(j)
                 seq_printf(p, "%10u ", irq_stats(j)->apic_perf_irqs);
-        seq_printf(p, "  Performance counter interrupts\n");
+        seq_printf(p, "  Performance monitoring interrupts\n");
         seq_printf(p, "%*s: ", prec, "PND");
         for_each_online_cpu(j)
                 seq_printf(p, "%10u ", irq_stats(j)->apic_pending_irqs);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 64b838eac18c..b2a71dca5642 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -35,7 +35,7 @@ int iommu_detected __read_mostly = 0;
 
 /*
  * This variable becomes 1 if iommu=pt is passed on the kernel command line.
- * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * If this variable is 1, IOMMU implementations do no DMA translation for
  * devices and allow every device to access to whole physical memory. This is
  * useful if a user want to use an IOMMU only for KVM device assignment to
  * guests and not for driver dma translation.
@@ -311,7 +311,7 @@ void pci_iommu_shutdown(void)
         amd_iommu_shutdown();
 }
 /* Must execute after PCI subsystem */
-fs_initcall(pci_iommu_init);
+rootfs_initcall(pci_iommu_init);
 
 #ifdef CONFIG_PCI
 /* Many VIA bridges seem to corrupt data for DAC. Disable it here */
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 98a827ee9ed7..a7f1b64f86e0 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -16,6 +16,7 @@
 #include <linux/agp_backend.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 27349f92a6d7..a1a3cdda06e1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -4,6 +4,7 @@
 #include <linux/pm.h>
 #include <linux/efi.h>
 #include <linux/dmi.h>
+#include <linux/sched.h>
 #include <linux/tboot.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index dcb00d278512..be2573448ed9 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -38,7 +38,8 @@ unsigned long profile_pc(struct pt_regs *regs)
 #ifdef CONFIG_FRAME_POINTER
                 return *(unsigned long *)(regs->bp + sizeof(long));
 #else
-                unsigned long *sp = (unsigned long *)regs->sp;
+                unsigned long *sp =
+                        (unsigned long *)kernel_stack_pointer(regs);
                 /*
                  * Return address is either directly at stack pointer
                  * or above a saved flags. Eflags has bits 22-31 zero,
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 503c1f2e8835..1740c85e24bb 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -23,8 +23,6 @@
 static struct bau_control       **uv_bau_table_bases __read_mostly;
 static int                      uv_bau_retry_limit __read_mostly;
 
-/* position of pnode (which is nasid>>1): */
-static int                      uv_nshift __read_mostly;
 /* base pnode in this partition */
 static int                      uv_partition_base_pnode __read_mostly;
 
@@ -723,7 +721,7 @@ uv_activation_descriptor_init(int node, int pnode)
         BUG_ON(!adp);
 
         pa = uv_gpa(adp); /* need the real nasid*/
-        n = pa >> uv_nshift;
+        n = uv_gpa_to_pnode(pa);
         m = pa & uv_mmask;
 
         uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
@@ -778,7 +776,7 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
          * need the pnode of where the memory was really allocated
          */
         pa = uv_gpa(pqp);
-        pn = pa >> uv_nshift;
+        pn = uv_gpa_to_pnode(pa);
         uv_write_global_mmr64(pnode,
                               UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
                               ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
@@ -843,8 +841,7 @@ static int __init uv_bau_init(void)
                                        GFP_KERNEL, cpu_to_node(cur_cpu));
 
         uv_bau_retry_limit = 1;
-        uv_nshift = uv_hub_info->n_val;
-        uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+        uv_mmask = (1UL << uv_hub_info->m_val) - 1;
         nblades = uv_num_possible_blades();
 
         uv_bau_table_bases = (struct bau_control **)
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index 699f7eeb896a..cd022121cab6 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -3,8 +3,16 @@
 #include <asm/trampoline.h>
 #include <asm/e820.h>
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP)
+#define __trampinit
+#define __trampinitdata
+#else
+#define __trampinit __cpuinit
+#define __trampinitdata __cpuinitdata
+#endif
+
 /* ready for x86_64 and x86 */
-unsigned char *__cpuinitdata trampoline_base = __va(TRAMPOLINE_BASE);
+unsigned char *__trampinitdata trampoline_base = __va(TRAMPOLINE_BASE);
 
 void __init reserve_trampoline_memory(void)
 {
@@ -26,7 +34,7 @@ void __init reserve_trampoline_memory(void)
  * bootstrap into the page concerned. The caller
  * has made sure it's suitably aligned.
  */
-unsigned long __cpuinit setup_trampoline(void)
+unsigned long __trampinit setup_trampoline(void)
 {
         memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE);
         return virt_to_phys(trampoline_base);
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 596d54c660a5..3af2dff58b21 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -32,8 +32,12 @@
 #include <asm/segment.h>
 #include <asm/processor-flags.h>
 
+#ifdef CONFIG_ACPI_SLEEP
+.section .rodata, "a", @progbits
+#else
 /* We can free up the trampoline after bootup if cpu hotplug is not supported. */
 __CPUINITRODATA
+#endif
 .code16
 
 ENTRY(trampoline_data)
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 31e6f6cfe53e..d430e4c30193 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -648,7 +648,7 @@ static inline int __init activate_vmi(void)
 
         pv_info.paravirt_enabled = 1;
         pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
-        pv_info.name = "vmi";
+        pv_info.name = "vmi [deprecated]";
 
         pv_init_ops.patch = vmi_patch;
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 92929fb3f9fa..3c68fe2d46cf 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -305,6 +305,9 @@ SECTIONS
 
 
 #ifdef CONFIG_X86_32
+/*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
 . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
            "kernel image bigger than KERNEL_IMAGE_SIZE");
 #else
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 82ad523b4901..144e7f60b5e2 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -116,7 +116,7 @@ static s64 __kpit_elapsed(struct kvm *kvm)
          * itself with the initial count and continues counting
          * from there.
          */
-        remaining = hrtimer_expires_remaining(&ps->pit_timer.timer);
+        remaining = hrtimer_get_remaining(&ps->pit_timer.timer);
         elapsed = ps->pit_timer.period - ktime_to_ns(remaining);
         elapsed = mod_64(elapsed, ps->pit_timer.period);
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 1ae5ceba7eb2..23c217692ea9 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -521,7 +521,7 @@ static u32 apic_get_tmcct(struct kvm_lapic *apic)
         if (apic_get_reg(apic, APIC_TMICT) == 0)
                 return 0;
 
-        remaining = hrtimer_expires_remaining(&apic->lapic_timer.timer);
+        remaining = hrtimer_get_remaining(&apic->lapic_timer.timer);
         if (ktime_to_ns(remaining) < 0)
                 remaining = ktime_set(0, 0);
 
@@ -664,7 +664,7 @@ static void start_apic_timer(struct kvm_lapic *apic)
 {
         ktime_t now = apic->lapic_timer.timer.base->get_time();
 
-        apic->lapic_timer.period = apic_get_reg(apic, APIC_TMICT) *
+        apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT) *
                     APIC_BUS_CYCLE_NS * apic->divide_count;
         atomic_set(&apic->lapic_timer.pending, 0);
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index eca41ae9f453..818b92ad82cf 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -156,6 +156,8 @@ module_param(oos_shadow, bool, 0644);
 #define CREATE_TRACE_POINTS
 #include "mmutrace.h"
 
+#define SPTE_HOST_WRITEABLE (1ULL << PT_FIRST_AVAIL_BITS_SHIFT)
+
 #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
@@ -634,9 +636,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
         if (*spte & shadow_accessed_mask)
                 kvm_set_pfn_accessed(pfn);
         if (is_writeble_pte(*spte))
-                kvm_release_pfn_dirty(pfn);
-        else
-                kvm_release_pfn_clean(pfn);
+                kvm_set_pfn_dirty(pfn);
         rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
         if (!*rmapp) {
                 printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
@@ -748,7 +748,8 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
         return write_protected;
 }
 
-static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
+                           unsigned long data)
 {
         u64 *spte;
         int need_tlb_flush = 0;
@@ -763,8 +764,47 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
         return need_tlb_flush;
 }
 
+static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
+                             unsigned long data)
+{
+        int need_flush = 0;
+        u64 *spte, new_spte;
+        pte_t *ptep = (pte_t *)data;
+        pfn_t new_pfn;
+
+        WARN_ON(pte_huge(*ptep));
+        new_pfn = pte_pfn(*ptep);
+        spte = rmap_next(kvm, rmapp, NULL);
+        while (spte) {
+                BUG_ON(!is_shadow_present_pte(*spte));
+                rmap_printk("kvm_set_pte_rmapp: spte %p %llx\n", spte, *spte);
+                need_flush = 1;
+                if (pte_write(*ptep)) {
+                        rmap_remove(kvm, spte);
+                        __set_spte(spte, shadow_trap_nonpresent_pte);
+                        spte = rmap_next(kvm, rmapp, NULL);
+                } else {
+                        new_spte = *spte &~ (PT64_BASE_ADDR_MASK);
+                        new_spte |= (u64)new_pfn << PAGE_SHIFT;
+
+                        new_spte &= ~PT_WRITABLE_MASK;
+                        new_spte &= ~SPTE_HOST_WRITEABLE;
+                        if (is_writeble_pte(*spte))
+                                kvm_set_pfn_dirty(spte_to_pfn(*spte));
+                        __set_spte(spte, new_spte);
+                        spte = rmap_next(kvm, rmapp, spte);
+                }
+        }
+        if (need_flush)
+                kvm_flush_remote_tlbs(kvm);
+
+        return 0;
+}
+
 static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
-                          int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+                          unsigned long data,
+                          int (*handler)(struct kvm *kvm, unsigned long *rmapp,
+                                         unsigned long data))
 {
         int i, j;
         int retval = 0;
@@ -786,13 +826,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
                 if (hva >= start && hva < end) {
                         gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
 
-                        retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+                        retval |= handler(kvm, &memslot->rmap[gfn_offset],
+                                          data);
 
                         for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
                                 int idx = gfn_offset;
                                 idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
                                 retval |= handler(kvm,
-                                        &memslot->lpage_info[j][idx].rmap_pde);
+                                        &memslot->lpage_info[j][idx].rmap_pde,
+                                        data);
                         }
                 }
         }
@@ -802,10 +844,16 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
 {
-        return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+        return kvm_handle_hva(kvm, hva, 0, kvm_unmap_rmapp);
 }
 
-static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
+{
+        kvm_handle_hva(kvm, hva, (unsigned long)&pte, kvm_set_pte_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
+                         unsigned long data)
 {
         u64 *spte;
         int young = 0;
@@ -841,13 +889,13 @@ static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
         gfn = unalias_gfn(vcpu->kvm, gfn);
         rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 
-        kvm_unmap_rmapp(vcpu->kvm, rmapp);
+        kvm_unmap_rmapp(vcpu->kvm, rmapp, 0);
         kvm_flush_remote_tlbs(vcpu->kvm);
 }
 
 int kvm_age_hva(struct kvm *kvm, unsigned long hva)
 {
-        return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+        return kvm_handle_hva(kvm, hva, 0, kvm_age_rmapp);
 }
 
 #ifdef MMU_DEBUG
@@ -1756,7 +1804,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
                     unsigned pte_access, int user_fault,
                     int write_fault, int dirty, int level,
                     gfn_t gfn, pfn_t pfn, bool speculative,
-                    bool can_unsync)
+                    bool can_unsync, bool reset_host_protection)
 {
         u64 spte;
         int ret = 0;
@@ -1783,6 +1831,9 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
                 spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
                         kvm_is_mmio_pfn(pfn));
 
+        if (reset_host_protection)
+                spte |= SPTE_HOST_WRITEABLE;
+
         spte |= (u64)pfn << PAGE_SHIFT;
 
         if ((pte_access & ACC_WRITE_MASK)
@@ -1828,7 +1879,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
                          unsigned pt_access, unsigned pte_access,
                          int user_fault, int write_fault, int dirty,
                          int *ptwrite, int level, gfn_t gfn,
-                         pfn_t pfn, bool speculative)
+                         pfn_t pfn, bool speculative,
+                         bool reset_host_protection)
 {
         int was_rmapped = 0;
         int was_writeble = is_writeble_pte(*sptep);
@@ -1860,7 +1912,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
         }
 
         if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
-                      dirty, level, gfn, pfn, speculative, true)) {
+                      dirty, level, gfn, pfn, speculative, true,
+                      reset_host_protection)) {
                 if (write_fault)
                         *ptwrite = 1;
                 kvm_x86_ops->tlb_flush(vcpu);
@@ -1877,8 +1930,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
         page_header_update_slot(vcpu->kvm, sptep, gfn);
         if (!was_rmapped) {
                 rmap_count = rmap_add(vcpu, sptep, gfn);
-                if (!is_rmap_spte(*sptep))
-                        kvm_release_pfn_clean(pfn);
+                kvm_release_pfn_clean(pfn);
                 if (rmap_count > RMAP_RECYCLE_THRESHOLD)
                         rmap_recycle(vcpu, sptep, gfn);
         } else {
@@ -1909,7 +1961,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
                 if (iterator.level == level) {
                         mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
                                      0, write, 1, &pt_write,
-                                     level, gfn, pfn, false);
+                                     level, gfn, pfn, false, true);
                         ++vcpu->stat.pf_fixed;
                         break;
                 }
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index d2fec9c12d22..72558f8ff3f5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -273,9 +273,13 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
         if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
                 return;
         kvm_get_pfn(pfn);
+        /*
+         * we call mmu_set_spte() with reset_host_protection = true beacuse that
+         * vcpu->arch.update_pte.pfn was fetched from get_user_pages(write = 1).
+         */
         mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
                      gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
-                     gpte_to_gfn(gpte), pfn, true);
+                     gpte_to_gfn(gpte), pfn, true, true);
 }
 
 /*
@@ -308,7 +312,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
                                      user_fault, write_fault,
                                      gw->ptes[gw->level-1] & PT_DIRTY_MASK,
                                      ptwrite, level,
-                                     gw->gfn, pfn, false);
+                                     gw->gfn, pfn, false, true);
                         break;
                 }
 
@@ -558,6 +562,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
         int i, offset, nr_present;
+        bool reset_host_protection;
 
         offset = nr_present = 0;
 
@@ -595,9 +600,16 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
                 nr_present++;
                 pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
+                if (!(sp->spt[i] & SPTE_HOST_WRITEABLE)) {
+                        pte_access &= ~ACC_WRITE_MASK;
+                        reset_host_protection = 0;
+                } else {
+                        reset_host_protection = 1;
+                }
                 set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
                          is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn,
-                         spte_to_pfn(sp->spt[i]), true, false);
+                         spte_to_pfn(sp->spt[i]), true, false,
+                         reset_host_protection);
         }
 
         return !nr_present;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 944cc9c04b3c..c17404add91f 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -767,6 +767,8 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
                 rdtscll(tsc_this);
                 delta = vcpu->arch.host_tsc - tsc_this;
                 svm->vmcb->control.tsc_offset += delta;
+                if (is_nested(svm))
+                        svm->nested.hsave->control.tsc_offset += delta;
                 vcpu->cpu = cpu;
                 kvm_migrate_timers(vcpu);
                 svm->asid_generation = 0;
@@ -2057,10 +2059,14 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 
         switch (ecx) {
         case MSR_IA32_TSC: {
-                u64 tsc;
+                u64 tsc_offset;
+
+                if (is_nested(svm))
+                        tsc_offset = svm->nested.hsave->control.tsc_offset;
+                else
+                        tsc_offset = svm->vmcb->control.tsc_offset;
 
-                rdtscll(tsc);
-                *data = svm->vmcb->control.tsc_offset + tsc;
+                *data = tsc_offset + native_read_tsc();
                 break;
         }
         case MSR_K6_STAR:
@@ -2146,10 +2152,17 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 
         switch (ecx) {
         case MSR_IA32_TSC: {
-                u64 tsc;
+                u64 tsc_offset = data - native_read_tsc();
+                u64 g_tsc_offset = 0;
+
+                if (is_nested(svm)) {
+                        g_tsc_offset = svm->vmcb->control.tsc_offset -
+                                       svm->nested.hsave->control.tsc_offset;
+                        svm->nested.hsave->control.tsc_offset = tsc_offset;
+                }
+
+                svm->vmcb->control.tsc_offset = tsc_offset + g_tsc_offset;
 
-                rdtscll(tsc);
-                svm->vmcb->control.tsc_offset = data - tsc;
                 break;
         }
         case MSR_K6_STAR:
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f3812014bd0b..ed53b42caba1 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -709,7 +709,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
         if (vcpu->cpu != cpu) {
                 vcpu_clear(vmx);
                 kvm_migrate_timers(vcpu);
-                vpid_sync_vcpu_all(vmx);
+                set_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests);
                 local_irq_disable();
                 list_add(&vmx->local_vcpus_link,
                          &per_cpu(vcpus_on_cpu, cpu));
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index be451ee44249..9b9695322f56 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1591,6 +1591,8 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 
         if (cpuid->nent < 1)
                 goto out;
+        if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
+                cpuid->nent = KVM_MAX_CPUID_ENTRIES;
         r = -ENOMEM;
         cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry2) * cpuid->nent);
         if (!cpuid_entries)
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 3e549b8ec8c9..85f5db95c60f 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -15,8 +15,10 @@ ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
-        lib-y += semaphore_32.o string_32.o cmpxchg8b_emu.o
-
+        lib-y += semaphore_32.o string_32.o
+ifneq ($(CONFIG_X86_CMPXCHG64),y)
+        lib-y += cmpxchg8b_emu.o
+endif
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
         obj-y += io_64.o iomap_copy_64.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 3439616d69f1..23a4d80fb39e 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1075,6 +1075,8 @@ asmlinkage void __init xen_start_kernel(void)
          * Set up some pagetable state before starting to set any ptes.
          */
 
+        xen_init_mmu_ops();
+
         /* Prevent unwanted bits from being set in PTEs. */
         __supported_pte_mask &= ~_PAGE_GLOBAL;
         if (!xen_initial_domain())
@@ -1099,7 +1101,6 @@ asmlinkage void __init xen_start_kernel(void)
          */
         xen_setup_stackprotector();
 
-        xen_init_mmu_ops();
         xen_init_irq_ops();
         xen_init_cpuid_mask();
 
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 19085ff0484a..19f7df30937f 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/clocksource.h>
 #include <linux/interrupt.h>