73 files changed, 1543 insertions, 785 deletions

diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
new file mode 100644
index 000000000000..d73dce645667
--- /dev/null
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        soc-u9500 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "stericsson,db8500";
+                interrupt-parent = <&intc>;
+                ranges;
+
+                intc: interrupt-controller@a0411000 {
+                        compatible = "arm,cortex-a9-gic";
+                        #interrupt-cells = <3>;
+                        #address-cells = <1>;
+                        interrupt-controller;
+                        interrupt-parent;
+                        reg = <0xa0411000 0x1000>,
+                              <0xa0410100 0x100>;
+                };
+
+                L2: l2-cache {
+                        compatible = "arm,pl310-cache";
+                        reg = <0xa0412000 0x1000>;
+                        interrupts = <0 13 4>;
+                        cache-unified;
+                        cache-level = <2>;
+                };
+
+                pmu {
+                        compatible = "arm,cortex-a9-pmu";
+                        interrupts = <0 7 0x4>;
+                };
+
+                timer@a0410600 {
+                        compatible = "arm,cortex-a9-twd-timer";
+                        reg = <0xa0410600 0x20>;
+                        interrupts = <1 13 0x304>;
+                };
+
+                rtc@80154000 {
+                        compatible = "stericsson,db8500-rtc";
+                        reg = <0x80154000 0x1000>;
+                        interrupts = <0 18 0x4>;
+                };
+
+                gpio0: gpio@8012e000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8012e000 0x80>;
+                        interrupts = <0 119 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio1: gpio@8012e080 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8012e080 0x80>;
+                        interrupts = <0 120 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio2: gpio@8000e000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e000 0x80>;
+                        interrupts = <0 121 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio3: gpio@8000e080 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e080 0x80>;
+                        interrupts = <0 122 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio4: gpio@8000e100 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e100 0x80>;
+                        interrupts = <0 123 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio5: gpio@8000e180 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e180 0x80>;
+                        interrupts = <0 124 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio6: gpio@8011e000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8011e000 0x80>;
+                        interrupts = <0 125 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio7: gpio@8011e080 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8011e080 0x80>;
+                        interrupts = <0 126 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio8: gpio@a03fe000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0xa03fe000 0x80>;
+                        interrupts = <0 127 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                usb@a03e0000 {
+                        compatible = "stericsson,db8500-musb",
+                                "mentor,musb";
+                        reg = <0xa03e0000 0x10000>;
+                        interrupts = <0 23 0x4>;
+                };
+
+                dma-controller@801C0000 {
+                        compatible = "stericsson,db8500-dma40",
+                                        "stericsson,dma40";
+                        reg = <0x801C0000 0x1000 0x40010000 0x800>;
+                        interrupts = <0 25 0x4>;
+                };
+
+                prcmu@80157000 {
+                        compatible = "stericsson,db8500-prcmu";
+                        reg = <0x80157000 0x1000>;
+                        interrupts = <46 47>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        ab8500@5 {
+                                compatible = "stericsson,ab8500";
+                                reg = <5>; /* mailbox 5 is i2c */
+                                interrupts = <0 40 0x4>;
+                        };
+                };
+
+                i2c@80004000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80004000 0x1000>;
+                        interrupts = <0 21 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@80122000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80122000 0x1000>;
+                        interrupts = <0 22 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@80128000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80128000 0x1000>;
+                        interrupts = <0 55 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@80110000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80110000 0x1000>;
+                        interrupts = <0 12 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@8012a000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x8012a000 0x1000>;
+                        interrupts = <0 51 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                ssp@80002000 {
+                        compatible = "arm,pl022", "arm,primecell";
+                        reg = <80002000 0x1000>;
+                        interrupts = <0 14 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        status = "disabled";
+
+                        // Add one of these for each child device
+                        cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
+
+                };
+
+                uart@80120000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0x80120000 0x1000>;
+                        interrupts = <0 11 0x4>;
+                        status = "disabled";
+                };
+                uart@80121000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0x80121000 0x1000>;
+                        interrupts = <0 19 0x4>;
+                        status = "disabled";
+                };
+                uart@80007000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0x80007000 0x1000>;
+                        interrupts = <0 26 0x4>;
+                        status = "disabled";
+                };
+
+                sdi@80126000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80126000 0x1000>;
+                        interrupts = <0 60 0x4>;
+                        status = "disabled";
+                };
+                sdi@80118000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80118000 0x1000>;
+                        interrupts = <0 50 0x4>;
+                        status = "disabled";
+                };
+                sdi@80005000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80005000 0x1000>;
+                        interrupts = <0 41 0x4>;
+                        status = "disabled";
+                };
+                sdi@80119000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80119000 0x1000>;
+                        interrupts = <0 59 0x4>;
+                        status = "disabled";
+                };
+                sdi@80114000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80114000 0x1000>;
+                        interrupts = <0 99 0x4>;
+                        status = "disabled";
+                };
+                sdi@80008000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80114000 0x1000>;
+                        interrupts = <0 100 0x4>;
+                        status = "disabled";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 305635bd45c0..37c0ff9c8b90 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -72,15 +72,15 @@
                 ranges;
 
                 timer@fff10600 {
-                        compatible = "arm,smp-twd";
+                        compatible = "arm,cortex-a9-twd-timer";
                         reg = <0xfff10600 0x20>;
-                        interrupts = <1 13 0xf04>;
+                        interrupts = <1 13 0xf01>;
                 };
 
                 watchdog@fff10620 {
-                        compatible = "arm,cortex-a9-wdt";
+                        compatible = "arm,cortex-a9-twd-wdt";
                         reg = <0xfff10620 0x20>;
-                        interrupts = <1 14 0xf04>;
+                        interrupts = <1 14 0xf01>;
                 };
 
                 intc: interrupt-controller@fff11000 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 263e8f3664b5..4905f51a106f 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -88,9 +88,9 @@
                 ranges;
 
                 timer@00a00600 {
-                        compatible = "arm,smp-twd";
-                        reg = <0x00a00600 0x100>;
-                        interrupts = <1 13 0xf4>;
+                        compatible = "arm,cortex-a9-twd-timer";
+                        reg = <0x00a00600 0x20>;
+                        interrupts = <1 13 0xf01>;
                 };
 
                 L2: l2-cache@00a02000 {
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
new file mode 100644
index 000000000000..359c6d679156
--- /dev/null
+++ b/arch/arm/boot/dts/snowball.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2011 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "db8500.dtsi"
+
+/ {
+        model = "Calao Systems Snowball platform with device tree";
+        compatible = "calaosystems,snowball-a9500";
+
+        memory {
+                reg = <0x00000000 0x20000000>;
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                button@1 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <2>;
+                        label = "userpb";
+                        gpios = <&gpio1 0>;
+                };
+                button@2 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <3>;
+                        label = "userpb";
+                        gpios = <&gpio4 23>;
+                };
+                button@3 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <4>;
+                        label = "userpb";
+                        gpios = <&gpio4 23>;
+                };
+                button@4 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <5>;
+                        label = "userpb";
+                        gpios = <&gpio5 1>;
+                };
+                button@5 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <6>;
+                        label = "userpb";
+                        gpios = <&gpio5 2>;
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+                used-led {
+                        label = "user_led";
+                        gpios = <&gpio4 14>;
+                };
+        };
+
+        soc-u9500 {
+
+                external-bus@50000000 {
+                        compatible = "simple-bus";
+                        reg = <0x50000000 0x10000000>;
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges;
+
+                        ethernet@50000000 {
+                                compatible = "smsc,9111";
+                                reg = <0x50000000 0x10000>;
+                                interrupts = <12>;
+                                interrupt-parent = <&gpio4>;
+                        };
+                };
+
+                sdi@80126000 {
+                        status = "enabled";
+                        cd-gpios = <&gpio6 26>;
+                };
+
+                sdi@80114000 {
+                        status = "enabled";
+                };
+
+                uart@80120000 {
+                        status = "okay";
+                };
+
+                uart@80121000 {
+                        status = "okay";
+                };
+
+                uart@80007000 {
+                        status = "okay";
+                };
+
+                i2c@80004000 {
+                        tc3589x@42 {
+                                //compatible = "tc3589x";
+                                reg = <0x42>;
+                                interrupts = <25>;
+                                interrupt-parent = <&gpio6>;
+                        };
+                        tps61052@33 {
+                                //compatible = "tps61052";
+                                reg = <0x33>;
+                        };
+                };
+
+                i2c@80128000 {
+                        lp5521@0x33 {
+                                // compatible = "lp5521";
+                                reg = <0x33>;
+                        };
+                        lp5521@0x34 {
+                                // compatible = "lp5521";
+                                reg = <0x34>;
+                        };
+                        bh1780@0x29 {
+                                // compatible = "rohm,bh1780gli";
+                                reg = <0x33>;
+                        };
+                };
+        };
+};
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d7b6e7b7271..889d73ac1ae1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
+CONFIG_MACH_UX500_DT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index c6a18424888e..f77ffc1eb0c2 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -11,47 +11,24 @@
 #define __ASM_ARM_LOCALTIMER_H
 
 #include <linux/errno.h>
-#include <linux/interrupt.h>
 
 struct clock_event_device;
 
-/*
- * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
- */
-void percpu_timer_setup(void);
+struct local_timer_ops {
+        int  (*setup)(struct clock_event_device *);
+        void (*stop)(struct clock_event_device *);
+};
 
 #ifdef CONFIG_LOCAL_TIMERS
-
-#ifdef CONFIG_HAVE_ARM_TWD
-
-#include "smp_twd.h"
-
-#define local_timer_stop(c)     twd_timer_stop((c))
-
-#else
-
-/*
- * Stop the local timer
- */
-void local_timer_stop(struct clock_event_device *);
-
-#endif
-
 /*
- * Setup a local timer interrupt for a CPU.
+ * Register a local timer driver
  */
-int local_timer_setup(struct clock_event_device *);
-
+int local_timer_register(struct local_timer_ops *);
 #else
-
-static inline int local_timer_setup(struct clock_event_device *evt)
+static inline int local_timer_register(struct local_timer_ops *ops)
 {
         return -ENXIO;
 }
-
-static inline void local_timer_stop(struct clock_event_device *evt)
-{
-}
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index ef9ffba97ad8..0f01f4677bd2 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -18,11 +18,28 @@
 #define TWD_TIMER_CONTROL_PERIODIC      (1 << 1)
 #define TWD_TIMER_CONTROL_IT_ENABLE     (1 << 2)
 
-struct clock_event_device;
+#include <linux/ioport.h>
 
-extern void __iomem *twd_base;
+struct twd_local_timer {
+        struct resource res[2];
+};
 
-void twd_timer_setup(struct clock_event_device *);
-void twd_timer_stop(struct clock_event_device *);
+#define DEFINE_TWD_LOCAL_TIMER(name,base,irq)   \
+struct twd_local_timer name __initdata = {      \
+        .res    = {                             \
+                DEFINE_RES_MEM(base, 0x10),     \
+                DEFINE_RES_IRQ(irq),            \
+        },                                      \
+};
+
+int twd_local_timer_register(struct twd_local_timer *);
+
+#ifdef CONFIG_HAVE_ARM_TWD
+void twd_local_timer_of_register(void);
+#else
+static inline void twd_local_timer_of_register(void)
+{
+}
+#endif
 
 #endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index cdeb727527d3..1ad84a6c9bfb 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -246,6 +246,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
         store_cpu_topology(cpuid);
 }
 
+static void percpu_timer_setup(void);
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -459,7 +461,20 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
         clockevents_register_device(evt);
 }
 
-void __cpuinit percpu_timer_setup(void)
+static struct local_timer_ops *lt_ops;
+
+#ifdef CONFIG_LOCAL_TIMERS
+int local_timer_register(struct local_timer_ops *ops)
+{
+        if (lt_ops)
+                return -EBUSY;
+
+        lt_ops = ops;
+        return 0;
+}
+#endif
+
+static void __cpuinit percpu_timer_setup(void)
 {
         unsigned int cpu = smp_processor_id();
         struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
@@ -467,7 +482,7 @@ void __cpuinit percpu_timer_setup(void)
         evt->cpumask = cpumask_of(cpu);
         evt->broadcast = smp_timer_broadcast;
 
-        if (local_timer_setup(evt))
+        if (!lt_ops || lt_ops->setup(evt))
                 broadcast_timer_setup(evt);
 }
 
@@ -482,7 +497,8 @@ static void percpu_timer_stop(void)
         unsigned int cpu = smp_processor_id();
         struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
 
-        local_timer_stop(evt);
+        if (lt_ops)
+                lt_ops->stop(evt);
 }
 #endif
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 7a79b24597b2..fef42b21cecb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -18,20 +18,23 @@
 #include <linux/smp.h>
 #include <linux/jiffies.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 
 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
 #include <asm/hardware/gic.h>
 
 /* set up by the platform code */
-void __iomem *twd_base;
+static void __iomem *twd_base;
 
 static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
 
 static struct clock_event_device __percpu **twd_evt;
+static int twd_ppi;
 
 static void twd_set_mode(enum clock_event_mode mode,
                         struct clock_event_device *clk)
@@ -77,7 +80,7 @@ static int twd_set_next_event(unsigned long evt,
  * If a local timer interrupt has occurred, acknowledge and return 1.
  * Otherwise, return 0.
  */
-int twd_timer_ack(void)
+static int twd_timer_ack(void)
 {
         if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
                 __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
@@ -87,7 +90,7 @@ int twd_timer_ack(void)
         return 0;
 }
 
-void twd_timer_stop(struct clock_event_device *clk)
+static void twd_timer_stop(struct clock_event_device *clk)
 {
         twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
         disable_percpu_irq(clk->irq);
@@ -222,28 +225,10 @@ static struct clk *twd_get_clock(void)
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 {
         struct clock_event_device **this_cpu_clk;
 
-        if (!twd_evt) {
-                int err;
-
-                twd_evt = alloc_percpu(struct clock_event_device *);
-                if (!twd_evt) {
-                        pr_err("twd: can't allocate memory\n");
-                        return;
-                }
-
-                err = request_percpu_irq(clk->irq, twd_handler,
-                                         "twd", twd_evt);
-                if (err) {
-                        pr_err("twd: can't register interrupt %d (%d)\n",
-                               clk->irq, err);
-                        return;
-                }
-        }
-
         if (!twd_clk)
                 twd_clk = twd_get_clock();
 
@@ -260,6 +245,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
         clk->rating = 350;
         clk->set_mode = twd_set_mode;
         clk->set_next_event = twd_set_next_event;
+        clk->irq = twd_ppi;
 
         this_cpu_clk = __this_cpu_ptr(twd_evt);
         *this_cpu_clk = clk;
@@ -267,4 +253,95 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
         clockevents_config_and_register(clk, twd_timer_rate,
                                         0xf, 0xffffffff);
         enable_percpu_irq(clk->irq, 0);
+
+        return 0;
+}
+
+static struct local_timer_ops twd_lt_ops __cpuinitdata = {
+        .setup  = twd_timer_setup,
+        .stop   = twd_timer_stop,
+};
+
+static int __init twd_local_timer_common_register(void)
+{
+        int err;
+
+        twd_evt = alloc_percpu(struct clock_event_device *);
+        if (!twd_evt) {
+                err = -ENOMEM;
+                goto out_free;
+        }
+
+        err = request_percpu_irq(twd_ppi, twd_handler, "twd", twd_evt);
+        if (err) {
+                pr_err("twd: can't register interrupt %d (%d)\n", twd_ppi, err);
+                goto out_free;
+        }
+
+        err = local_timer_register(&twd_lt_ops);
+        if (err)
+                goto out_irq;
+
+        return 0;
+
+out_irq:
+        free_percpu_irq(twd_ppi, twd_evt);
+out_free:
+        iounmap(twd_base);
+        twd_base = NULL;
+        free_percpu(twd_evt);
+
+        return err;
 }
+
+int __init twd_local_timer_register(struct twd_local_timer *tlt)
+{
+        if (twd_base || twd_evt)
+                return -EBUSY;
+
+        twd_ppi = tlt->res[1].start;
+
+        twd_base = ioremap(tlt->res[0].start, resource_size(&tlt->res[0]));
+        if (!twd_base)
+                return -ENOMEM;
+
+        return twd_local_timer_common_register();
+}
+
+#ifdef CONFIG_OF
+const static struct of_device_id twd_of_match[] __initconst = {
+        { .compatible = "arm,cortex-a9-twd-timer",      },
+        { .compatible = "arm,cortex-a5-twd-timer",      },
+        { .compatible = "arm,arm11mp-twd-timer",        },
+        { },
+};
+
+void __init twd_local_timer_of_register(void)
+{
+        struct device_node *np;
+        int err;
+
+        np = of_find_matching_node(NULL, twd_of_match);
+        if (!np) {
+                err = -ENODEV;
+                goto out;
+        }
+
+        twd_ppi = irq_of_parse_and_map(np, 0);
+        if (!twd_ppi) {
+                err = -EINVAL;
+                goto out;
+        }
+
+        twd_base = of_iomap(np, 0);
+        if (!twd_base) {
+                err = -ENOMEM;
+                goto out;
+        }
+
+        err = twd_local_timer_common_register();
+
+out:
+        WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
+}
+#endif
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 85b5527d0918..edc4b9488f2f 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -21,6 +21,7 @@
 #include <linux/percpu.h>
 
 #include <asm/hardware/gic.h>
+#include <asm/localtimer.h>
 
 #include <plat/cpu.h>
 
@@ -375,7 +376,7 @@ static struct irqaction mct_tick1_event_irq = {
         .handler        = exynos4_mct_tick_isr,
 };
 
-static void exynos4_mct_tick_init(struct clock_event_device *evt)
+static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
         struct mct_clock_event_device *mevt;
         unsigned int cpu = smp_processor_id();
@@ -417,17 +418,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
         } else {
                 enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
         }
-}
-
-/* Setup the local clock events for a CPU */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        exynos4_mct_tick_init(evt);
 
         return 0;
 }
 
-void local_timer_stop(struct clock_event_device *evt)
+static void exynos4_local_timer_stop(struct clock_event_device *evt)
 {
         unsigned int cpu = smp_processor_id();
         evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
@@ -439,6 +434,11 @@ void local_timer_stop(struct clock_event_device *evt)
         else
                 disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
+
+static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
+        .setup  = exynos4_local_timer_setup,
+        .stop   = exynos4_local_timer_stop,
+};
 #endif /* CONFIG_LOCAL_TIMERS */
 
 static void __init exynos4_timer_resources(void)
@@ -458,6 +458,8 @@ static void __init exynos4_timer_resources(void)
                 WARN(err, "MCT: can't request IRQ %d (%d)\n",
                      IRQ_MCT_LOCALTIMER, err);
         }
+
+        local_timer_register(&exynos4_mct_tick_ops);
 #endif /* CONFIG_LOCAL_TIMERS */
 }
 
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 986958a5a720..f8437dd238c2 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,6 +1,5 @@
 obj-y                                   := clock.o highbank.o system.o
 obj-$(CONFIG_DEBUG_HIGHBANK_UART)       += lluart.o
 obj-$(CONFIG_SMP)                       += platsmp.o
-obj-$(CONFIG_LOCAL_TIMERS)              += localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_PM_SLEEP)                  += pm.o
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8394d512a402..bb1684f9b68b 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -27,6 +27,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+#include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/gic.h>
@@ -111,6 +112,8 @@ static void __init highbank_timer_init(void)
 
         sp804_clocksource_init(timer_base + 0x20, "timer1");
         sp804_clockevents_init(timer_base, irq, "timer0");
+
+        twd_local_timer_of_register();
 }
 
 static struct sys_timer highbank_timer = {
diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c
deleted file mode 100644
index 5a00e7945fdf..000000000000
--- a/arch/arm/mach-highbank/localtimer.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/clockchips.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/smp_twd.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        struct device_node *np;
-
-        np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
-        if (!twd_base) {
-                twd_base = of_iomap(np, 0);
-                WARN_ON(!twd_base);
-        }
-        evt->irq = irq_of_parse_and_map(np, 0);
-        twd_timer_setup(evt);
-        return 0;
-}
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 4ffeca7ee25e..8f57daf5e798 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -72,7 +72,6 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
 AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
 obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c
deleted file mode 100644
index 3a163515d41f..000000000000
--- a/arch/arm/mach-imx/localtimer.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/smp_twd.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        struct device_node *np;
-
-        np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
-        if (!twd_base) {
-                twd_base = of_iomap(np, 0);
-                WARN_ON(!twd_base);
-        }
-        evt->irq = irq_of_parse_and_map(np, 0);
-        twd_timer_setup(evt);
-
-        return 0;
-}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 379b1a9cd22b..7696dfa2bdba 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -21,6 +21,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
+#include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
@@ -120,6 +121,7 @@ static void __init imx6q_init_irq(void)
 static void __init imx6q_timer_init(void)
 {
         mx6q_clocks_init();
+        twd_local_timer_of_register();
 }
 
 static struct sys_timer imx6q_timer = {
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 11d0d8f2656c..75f4be40b3e5 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -127,6 +127,45 @@ static struct clocksource msm_clocksource = {
         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+#ifdef CONFIG_LOCAL_TIMERS
+static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
+{
+        /* Use existing clock_event for cpu 0 */
+        if (!smp_processor_id())
+                return 0;
+
+        writel_relaxed(0, event_base + TIMER_ENABLE);
+        writel_relaxed(0, event_base + TIMER_CLEAR);
+        writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
+        evt->irq = msm_clockevent.irq;
+        evt->name = "local_timer";
+        evt->features = msm_clockevent.features;
+        evt->rating = msm_clockevent.rating;
+        evt->set_mode = msm_timer_set_mode;
+        evt->set_next_event = msm_timer_set_next_event;
+        evt->shift = msm_clockevent.shift;
+        evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
+        evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
+        evt->min_delta_ns = clockevent_delta2ns(4, evt);
+
+        *__this_cpu_ptr(msm_evt.percpu_evt) = evt;
+        clockevents_register_device(evt);
+        enable_percpu_irq(evt->irq, 0);
+        return 0;
+}
+
+static void msm_local_timer_stop(struct clock_event_device *evt)
+{
+        evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+        disable_percpu_irq(evt->irq);
+}
+
+static struct local_timer_ops msm_local_timer_ops __cpuinitdata = {
+        .setup  = msm_local_timer_setup,
+        .stop   = msm_local_timer_stop,
+};
+#endif /* CONFIG_LOCAL_TIMERS */
+
 static void __init msm_timer_init(void)
 {
         struct clock_event_device *ce = &msm_clockevent;
@@ -173,8 +212,12 @@ static void __init msm_timer_init(void)
                 *__this_cpu_ptr(msm_evt.percpu_evt) = ce;
                 res = request_percpu_irq(ce->irq, msm_timer_interrupt,
                                          ce->name, msm_evt.percpu_evt);
-                if (!res)
+                if (!res) {
                         enable_percpu_irq(ce->irq, 0);
+#ifdef CONFIG_LOCAL_TIMERS
+                        local_timer_register(&msm_local_timer_ops);
+#endif
+                }
         } else {
                 msm_evt.evt = ce;
                 res = request_irq(ce->irq, msm_timer_interrupt,
@@ -191,40 +234,6 @@ err:
                 pr_err("clocksource_register failed\n");
 }
 
-#ifdef CONFIG_LOCAL_TIMERS
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        /* Use existing clock_event for cpu 0 */
-        if (!smp_processor_id())
-                return 0;
-
-        writel_relaxed(0, event_base + TIMER_ENABLE);
-        writel_relaxed(0, event_base + TIMER_CLEAR);
-        writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
-        evt->irq = msm_clockevent.irq;
-        evt->name = "local_timer";
-        evt->features = msm_clockevent.features;
-        evt->rating = msm_clockevent.rating;
-        evt->set_mode = msm_timer_set_mode;
-        evt->set_next_event = msm_timer_set_next_event;
-        evt->shift = msm_clockevent.shift;
-        evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
-        evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
-        evt->min_delta_ns = clockevent_delta2ns(4, evt);
-
-        *__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-        clockevents_register_device(evt);
-        enable_percpu_irq(evt->irq, 0);
-        return 0;
-}
-
-void local_timer_stop(struct clock_event_device *evt)
-{
-        evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-        disable_percpu_irq(evt->irq);
-}
-#endif /* CONFIG_LOCAL_TIMERS */
-
 struct sys_timer msm_timer = {
         .init = msm_timer_init
 };
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index f6f74adbe8c4..58cacafcf662 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,11 +27,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach/time.h>
 
 #include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
 
-#include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 
@@ -246,10 +246,7 @@ static void __init nomadik_timer_init(void)
         src_cr |= SRC_CR_INIT_VAL;
         writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
 
-        /* Save global pointer to mtu, used by platform timer code */
-        mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
-        nmdk_timer_init();
+        nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
 }
 
 static struct sys_timer nomadik_timer = {
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
deleted file mode 100644
index bcaeaf41c053..000000000000
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ /dev/null
@@ -1,19 +0,0 @@
-
-/*
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-#include <asm/mach/time.h>
-#include <linux/init.h>
-
-#ifdef CONFIG_NOMADIK_8815
-
-extern void nmdk_timer_init(void);
-
-#endif /* NOMADIK_8815 */
-
-#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bd76394ccaf8..05c2ffc1030a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
 
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)                       += omap-smp.o omap-headsmp.o
-obj-$(CONFIG_LOCAL_TIMERS)              += timer-mpu.o
 obj-$(CONFIG_HOTPLUG_CPU)               += omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)                += omap4-common.o omap-wakeupgen.o \
                                            sleep44xx.o
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
deleted file mode 100644
index 31c0ac4cd66a..000000000000
--- a/arch/arm/mach-omap2/timer-mpu.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
- * own timer in it's MPU domain. These timers will be driving the
- * linux kernel SMP tick framework when active. These timers are not
- * part of the wake up domain.
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- *      Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is based on arm realview smp platform file.
- * Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        /* Local timers are not supprted on OMAP4430 ES1.0 */
-        if (omap_rev() == OMAP4430_REV_ES1_0)
-                return -ENXIO;
-
-        evt->irq = OMAP44XX_IRQ_LOCALTIMER;
-        twd_timer_setup(evt);
-        return 0;
-}
-
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 5c9acea95761..c512bac69ec5 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -39,7 +39,7 @@
 
 #include <asm/mach/time.h>
 #include <plat/dmtimer.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 #include "common.h"
 #include <plat/omap_hwmod.h>
@@ -324,14 +324,26 @@ OMAP_SYS_TIMER(3_secure)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static void __init omap4_timer_init(void)
-{
 #ifdef CONFIG_LOCAL_TIMERS
-        twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
-        BUG_ON(!twd_base);
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+                              OMAP44XX_LOCAL_TWD_BASE,
+                              OMAP44XX_IRQ_LOCALTIMER);
 #endif
+
+static void __init omap4_timer_init(void)
+{
         omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
         omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
+#ifdef CONFIG_LOCAL_TIMERS
+        /* Local timers are not supprted on OMAP4430 ES1.0 */
+        if (omap_rev() != OMAP4430_REV_ES1_0) {
+                int err;
+
+                err = twd_local_timer_register(&twd_local_timer);
+                if (err)
+                        pr_err("twd_local_timer_register failed %d\n", err);
+        }
+#endif
 }
 OMAP_SYS_TIMER(4)
 #endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 157e1bc6e83c..baf382c5e776 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -383,6 +383,23 @@ static void realview_eb11mp_fixup(void)
         realview_eb_isp1761_resources[1].end    = IRQ_EB11MP_USB;
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+                              REALVIEW_EB11MP_TWD_BASE,
+                              IRQ_LOCALTIMER);
+
+static void __init realview_eb_twd_init(void)
+{
+        if (core_tile_eb11mp() || core_tile_a9mp()) {
+                int err = twd_local_timer_register(&twd_local_timer);
+                if (err)
+                        pr_err("twd_local_timer_register failed %d\n", err);
+        }
+}
+#else
+#define realview_eb_twd_init()  do { } while(0)
+#endif
+
 static void __init realview_eb_timer_init(void)
 {
         unsigned int timer_irq;
@@ -392,15 +409,13 @@ static void __init realview_eb_timer_init(void)
         timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
         timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
 
-        if (core_tile_eb11mp() || core_tile_a9mp()) {
-#ifdef CONFIG_LOCAL_TIMERS
-                twd_base = __io_address(REALVIEW_EB11MP_TWD_BASE);
-#endif
+        if (core_tile_eb11mp() || core_tile_a9mp())
                 timer_irq = IRQ_EB11MP_TIMER0_1;
-        } else
+        else
                 timer_irq = IRQ_EB_TIMER0_1;
 
         realview_timer_init(timer_irq);
+        realview_eb_twd_init();
 }
 
 static struct sys_timer realview_eb_timer = {
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ae7fe54f6eb6..a98c536e3327 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -290,6 +290,21 @@ static void __init gic_init_irq(void)
         gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+                              REALVIEW_TC11MP_TWD_BASE,
+                              IRQ_LOCALTIMER);
+
+static void __init realview_pb11mp_twd_init(void)
+{
+        int err = twd_local_timer_register(&twd_local_timer);
+        if (err)
+                pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define realview_pb11mp_twd_init()      do {} while(0)
+#endif
+
 static void __init realview_pb11mp_timer_init(void)
 {
         timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
@@ -297,10 +312,8 @@ static void __init realview_pb11mp_timer_init(void)
         timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
         timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
 
-#ifdef CONFIG_LOCAL_TIMERS
-        twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE);
-#endif
         realview_timer_init(IRQ_TC11MP_TIMER0_1);
+        realview_pb11mp_twd_init();
 }
 
 static struct sys_timer realview_pb11mp_timer = {
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 1cd9956f5875..3f2f605624e9 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -298,6 +298,21 @@ static void __init gic_init_irq(void)
         }
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+                              REALVIEW_PBX_TILE_TWD_BASE,
+                              IRQ_LOCALTIMER);
+
+static void __init realview_pbx_twd_init(void)
+{
+        int err = twd_local_timer_register(&twd_local_timer);
+        if (err)
+                pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define realview_pbx_twd_init() do { } while(0)
+#endif
+
 static void __init realview_pbx_timer_init(void)
 {
         timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
@@ -305,11 +320,8 @@ static void __init realview_pbx_timer_init(void)
         timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
         timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
 
-#ifdef CONFIG_LOCAL_TIMERS
-        if (core_tile_pbx11mp() || core_tile_pbxa9mp())
-                twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
-#endif
         realview_timer_init(IRQ_PBX_TIMER0_1);
+        realview_pbx_twd_init();
 }
 
 static struct sys_timer realview_pbx_timer = {
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 7ad6954c46cd..e7c2590b75d9 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
 # SMP objects
 smp-y                           := platsmp.o headsmp.o
 smp-$(CONFIG_HOTPLUG_CPU)       += hotplug.o
-smp-$(CONFIG_LOCAL_TIMERS)      += localtimer.o
 smp-$(CONFIG_ARCH_SH73A0)       += smp-sh73a0.o
 smp-$(CONFIG_ARCH_R8A7779)      += smp-r8a7779.o
 
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e4b945e271e7..9fde3eb686a6 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -2,6 +2,8 @@
 #define __ARCH_MACH_COMMON_H
 
 extern struct sys_timer shmobile_timer;
+struct twd_local_timer;
+void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-shmobile/localtimer.c b/arch/arm/mach-shmobile/localtimer.c
deleted file mode 100644
index ad9ccc9900c8..000000000000
--- a/arch/arm/mach-shmobile/localtimer.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile - local timer portion
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        evt->irq = 29;
-        twd_timer_setup(evt);
-        return 0;
-}
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 993381257f69..45fa3924c6a1 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -17,7 +17,6 @@
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <asm/hardware/gic.h>
-#include <asm/localtimer.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 4fe2e9eaf501..9bb7b8575a1f 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -64,6 +64,8 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
         void __iomem *scu_base = scu_base_addr();
@@ -82,11 +84,7 @@ unsigned int __init r8a7779_get_core_count(void)
 {
         void __iomem *scu_base = scu_base_addr();
 
-#ifdef CONFIG_HAVE_ARM_TWD
-        /* twd_base needs to be initialized before percpu_timer_setup() */
-        twd_base = (void __iomem *)0xf0000600;
-#endif
-
+        shmobile_twd_init(&twd_local_timer);
         return scu_get_core_count(scu_base);
 }
 
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 2d0d4212be41..c0a9093ba3a8 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -42,6 +42,8 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
         void __iomem *scu_base = scu_base_addr();
@@ -60,11 +62,7 @@ unsigned int __init sh73a0_get_core_count(void)
 {
         void __iomem *scu_base = scu_base_addr();
 
-#ifdef CONFIG_HAVE_ARM_TWD
-        /* twd_base needs to be initialized before percpu_timer_setup() */
-        twd_base = (void __iomem *)0xf0000600;
-#endif
-
+        shmobile_twd_init(&twd_local_timer);
         return scu_get_core_count(scu_base);
 }
 
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 895794b543cd..be16231e86fc 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -20,6 +20,7 @@
  */
 #include <linux/platform_device.h>
 #include <asm/mach/time.h>
+#include <asm/smp_twd.h>
 
 static void __init shmobile_late_time_init(void)
 {
@@ -41,6 +42,15 @@ static void __init shmobile_timer_init(void)
         late_time_init = shmobile_late_time_init;
 }
 
+void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
+{
+#ifdef CONFIG_HAVE_ARM_TWD
+        int err = twd_local_timer_register(twd_local_timer);
+        if (err)
+                pr_err("twd_local_timer_register failed %d\n", err);
+#endif
+}
+
 struct sys_timer shmobile_timer = {
         .init           = shmobile_timer_init,
 };
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index e120ff54f663..f7d044369ed5 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += pinmux-tegra20-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += pinmux-tegra30-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += board-dt-tegra30.o
-obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_SMP)                       += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)          += dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c
deleted file mode 100644
index e91d681d45a2..000000000000
--- a/arch/arm/mach-tegra/localtimer.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-tegra/localtimer.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        evt->irq = IRQ_LOCALTIMER;
-        twd_timer_setup(evt);
-        return 0;
-}
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 1d1acda4f3e0..1eed8d4a80ef 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/time.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 
 #include <mach/iomap.h>
@@ -162,6 +162,21 @@ static struct irqaction tegra_timer_irq = {
         .irq            = INT_TMR3,
 };
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+                              TEGRA_ARM_PERIF_BASE + 0x600,
+                              IRQ_LOCALTIMER);
+
+static void __init tegra_twd_init(void)
+{
+        int err = twd_local_timer_register(&twd_local_timer);
+        if (err)
+                pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define tegra_twd_init()        do {} while(0)
+#endif
+
 static void __init tegra_init_timer(void)
 {
         struct clk *clk;
@@ -188,10 +203,6 @@ static void __init tegra_init_timer(void)
         else
                 clk_enable(clk);
 
-#ifdef CONFIG_HAVE_ARM_TWD
-        twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);
-#endif
-
         switch (rate) {
         case 12000000:
                 timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -231,6 +242,7 @@ static void __init tegra_init_timer(void)
         tegra_clockevent.cpumask = cpu_all_mask;
         tegra_clockevent.irq = tegra_timer_irq.irq;
         clockevents_register_device(&tegra_clockevent);
+        tegra_twd_init();
 }
 
 struct sys_timer tegra_timer = {
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 52af00446a63..afb3706bab2a 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -28,6 +28,7 @@ config MACH_U8500
         bool "U8500 Development platform"
         depends on UX500_SOC_DB8500
         select TPS6105X
+        select SOC_BUS
         help
           Include support for the mop500 development platform.
 
@@ -49,6 +50,12 @@ config MACH_U5500
         depends on UX500_SOC_DB5500
         help
           Include support for the U5500 development platform.
+
+config MACH_UX500_DT
+        bool "Generic U8500 support using device tree"
+        depends on MACH_U8500
+        select USE_OF
+
 endmenu
 
 config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 6bd2f451c185..35b389442afe 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
 obj-$(CONFIG_MACH_U5500)        += board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)               += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)       += hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS)      += localtimer.o
 obj-$(CONFIG_U5500_MODEM_IRQ)   += modem-irq-db5500.o
 obj-$(CONFIG_U5500_MBOX)        += mbox-db5500.o
 
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index ff0a4b5b0a82..dd5cd00e2554 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -2,3 +2,4 @@
 params_phys-y   := 0x00000100
 initrd_phys-y   := 0x00800000
 
+dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 5dde4d4ebe88..479ebe04cf9c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
         int ret;
 
@@ -123,15 +123,15 @@ static void sdi0_configure(void)
         gpio_direction_output(sdi0_en, 1);
 
         /* Add the device, force v2 to subrevision 1 */
-        db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
         mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
         sdi0_en = GPIO_SDMMC_EN;
         sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-        sdi0_configure();
+        sdi0_configure(parent);
 }
 
 /*
@@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
         /* PoP:ed eMMC */
-        db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
         /* On-board eMMC */
-        db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
         /*
          * On boards with the TC35892 GPIO expander, sdi0 will finally
          * be added when the TC35892 initializes and calls
@@ -259,31 +260,31 @@ void __init mop500_sdi_init(void)
          */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
         /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
         mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
         /* On-board eMMC */
-        db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
         /* External Micro SD slot */
         mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
         mop500_sdi0_data.cd_invert = true;
         sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
         sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-        sdi0_configure();
+        sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
         /* PoP:ed eMMC */
-        db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
         /* On-board eMMC */
-        db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
         /* External Micro SD slot */
         mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
         sdi0_en = HREFV60_SDMMC_EN_GPIO;
         sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-        sdi0_configure();
+        sdi0_configure(parent);
         /* WLAN SDIO channel */
-        db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+        db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712907d1..d0799d592218 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -30,6 +30,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
 
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -226,7 +229,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-        mop500_sdi_tc35892_init();
+        struct device *parent = NULL;
+#if 0
+        /* FIXME: Is the sdi actually part of tc3589x? */
+        parent = tc3589x->dev;
+#endif
+        mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +361,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-        db8500_add_i2c0(&u8500_i2c0_data);
-        db8500_add_i2c1(&u8500_i2c1_data);
-        db8500_add_i2c2(&u8500_i2c2_data);
-        db8500_add_i2c3(&u8500_i2c3_data);
+        db8500_add_i2c0(parent, &u8500_i2c0_data);
+        db8500_add_i2c1(parent, &u8500_i2c1_data);
+        db8500_add_i2c2(parent, &u8500_i2c2_data);
+        db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -435,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
 };
 #endif
 
-static struct pl022_ssp_controller ssp0_platform_data = {
+static struct pl022_ssp_controller ssp0_plat = {
         .bus_id = 0,
 #ifdef CONFIG_STE_DMA40
         .enable_dma = 1,
@@ -451,9 +459,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
         .num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-        db8500_add_ssp0(&ssp0_platform_data);
+        db8500_add_ssp0(parent, &ssp0_plat);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -587,11 +595,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-        db8500_add_uart0(&uart0_plat);
-        db8500_add_uart1(&uart1_plat);
-        db8500_add_uart2(&uart2_plat);
+        db8500_add_uart0(parent, &uart0_plat);
+        db8500_add_uart1(parent, &uart1_plat);
+        db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +611,27 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+        struct device *parent = NULL;
         int i2c0_devs;
+        int i;
 
         mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-        u8500_init_devices();
+        parent = u8500_init_devices();
 
         mop500_pins_init();
 
+        /* FIXME: parent of ab8500 should be prcmu */
+        for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+                mop500_platform_devs[i]->dev.parent = parent;
+
         platform_add_devices(mop500_platform_devs,
                         ARRAY_SIZE(mop500_platform_devs));
 
-        mop500_i2c_init();
-        mop500_sdi_init();
-        mop500_spi_init();
-        mop500_uart_init();
+        mop500_i2c_init(parent);
+        mop500_sdi_init(parent);
+        mop500_spi_init(parent);
+        mop500_uart_init(parent);
 
         i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -631,19 +645,24 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+        struct device *parent = NULL;
         int i2c0_devs;
+        int i;
 
-        u8500_init_devices();
+        parent = u8500_init_devices();
 
         snowball_pins_init();
 
+        for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+                snowball_platform_devs[i]->dev.parent = parent;
+
         platform_add_devices(snowball_platform_devs,
                         ARRAY_SIZE(snowball_platform_devs));
 
-        mop500_i2c_init();
-        snowball_sdi_init();
-        mop500_spi_init();
-        mop500_uart_init();
+        mop500_i2c_init(parent);
+        snowball_sdi_init(parent);
+        mop500_spi_init(parent);
+        mop500_uart_init(parent);
 
         i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
         i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,7 +675,9 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+        struct device *parent = NULL;
         int i2c0_devs;
+        int i;
 
         /*
          * The HREFv60 board removed a GPIO expander and routed
@@ -665,17 +686,20 @@ static void __init hrefv60_init_machine(void)
          */
         mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-        u8500_init_devices();
+        parent = u8500_init_devices();
 
         hrefv60_pins_init();
 
+        for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+                mop500_platform_devs[i]->dev.parent = parent;
+
         platform_add_devices(mop500_platform_devs,
                         ARRAY_SIZE(mop500_platform_devs));
 
-        mop500_i2c_init();
-        hrefv60_sdi_init();
-        mop500_spi_init();
-        mop500_uart_init();
+        mop500_i2c_init(parent);
+        hrefv60_sdi_init(parent);
+        mop500_spi_init(parent);
+        mop500_uart_init(parent);
 
         i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -718,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
         .handle_irq     = gic_handle_irq,
         .init_machine   = snowball_init_machine,
 MACHINE_END
+
+#ifdef CONFIG_MACH_UX500_DT
+
+struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+        OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+        OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+        OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+        OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
+        {},
+};
+
+static const struct of_device_id u8500_soc_node[] = {
+        /* only create devices below soc node */
+        { .compatible = "stericsson,db8500", },
+        { },
+};
+
+static void __init u8500_init_machine(void)
+{
+        struct device *parent = NULL;
+        int i2c0_devs;
+        int i;
+
+        parent = u8500_init_devices();
+        i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+        for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+                mop500_platform_devs[i]->dev.parent = parent;
+        for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+                snowball_platform_devs[i]->dev.parent = parent;
+
+        /* automatically probe child nodes of db8500 device */
+        of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+
+        if (of_machine_is_compatible("st-ericsson,mop500")) {
+                mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+                mop500_pins_init();
+
+                platform_add_devices(mop500_platform_devs,
+                                ARRAY_SIZE(mop500_platform_devs));
+
+                mop500_sdi_init(parent);
+        } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+                snowball_pins_init();
+                platform_add_devices(snowball_platform_devs,
+                                ARRAY_SIZE(snowball_platform_devs));
+
+                snowball_sdi_init(parent);
+        } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
+                /*
+                 * The HREFv60 board removed a GPIO expander and routed
+                 * all these GPIO pins to the internal GPIO controller
+                 * instead.
+                 */
+                mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+                i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+                hrefv60_pins_init();
+                platform_add_devices(mop500_platform_devs,
+                                ARRAY_SIZE(mop500_platform_devs));
+
+                hrefv60_sdi_init(parent);
+        }
+        mop500_i2c_init(parent);
+
+        i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+        i2c_register_board_info(2, mop500_i2c2_devices,
+                                ARRAY_SIZE(mop500_i2c2_devices));
+
+        /* This board has full regulator constraints */
+        regulator_has_full_constraints();
+}
+
+static const char * u8500_dt_board_compat[] = {
+        "calaosystems,snowball-a9500",
+        "st-ericsson,hrefv60+",
+        "st-ericsson,u8500",
+        "st-ericsson,mop500",
+        NULL,
+};
+
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+        .map_io         = u8500_map_io,
+        .init_irq       = ux500_init_irq,
+        /* we re-use nomadik timer here */
+        .timer          = &ux500_timer,
+        .handle_irq     = gic_handle_irq,
+        .init_machine   = u8500_init_machine,
+        .dt_compat      = u8500_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3db6207..3d594c24bfee 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -75,10 +75,10 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 63c3f8058ffc..836112eedde7 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
         nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-        db5500_add_sdi0(&u5500_sdi0_data);
+        db5500_add_sdi0(parent, &u5500_sdi0_data);
 }
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9de9e9c4dbbb..0ff4be72a809 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
         },
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-        db5500_add_i2c2(&u5500_i2c2_data);
+        db5500_add_i2c2(parent, &u5500_i2c2_data);
         i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -126,20 +126,27 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
         &ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-        db5500_add_uart0(NULL);
-        db5500_add_uart1(NULL);
-        db5500_add_uart2(NULL);
+        db5500_add_uart0(parent, NULL);
+        db5500_add_uart1(parent, NULL);
+        db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-        u5500_init_devices();
+        struct device *parent = NULL;
+        int i;
+
+        parent = u5500_init_devices();
         nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-        u5500_i2c_init();
-        u5500_sdi_init();
-        u5500_uart_init();
+
+        u5500_i2c_init(parent);
+        u5500_sdi_init(parent);
+        u5500_uart_init(parent);
+
+        for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
+                u5500_platform_devices[i]->dev.parent = parent;
 
         platform_add_devices(u5500_platform_devices,
                 ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index da5569d83d58..77a75ed0df67 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -5,6 +5,8 @@
  */
 
 #include <linux/io.h>
+#include <linux/of.h>
+
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/hardware.h>
@@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void)
         ux500_l2x0_unlock();
 
         /* 64KB way size, 8 way associativity, force WA */
-        l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+        if (of_have_populated_dt())
+                l2x0_of_init(0x3e060000, 0xc0000fff);
+        else
+                l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
         /*
          * We can't disable l2 as we are in non secure mode, currently
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 18aa5c05c69e..bca47f32082f 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
         U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
         struct nmk_gpio_platform_data pdata = {
                 /* No custom data yet */
         };
 
-        dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+        dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
                          IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -212,14 +212,36 @@ static int usb_db5500_tx_dma_cfg[] = {
         DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+static const char *db5500_read_soc_id(void)
 {
-        db5500_add_gpios();
+        return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
+}
+
+static struct device * __init db5500_soc_device_init(void)
+{
+        const char *soc_id = db5500_read_soc_id();
+
+        return ux500_soc_device_init(soc_id);
+}
+
+struct device * __init u5500_init_devices(void)
+{
+        struct device *parent;
+        int i;
+
+        parent = db5500_soc_device_init();
+
+        db5500_add_gpios(parent);
         db5500_pmu_init();
-        db5500_dma_init();
-        db5500_add_rtc();
-        db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+        db5500_dma_init(parent);
+        db5500_add_rtc(parent);
+        db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+
+        for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
+                db5500_platform_devs[i]->dev.parent = parent;
 
         platform_add_devices(db5500_platform_devs,
                              ARRAY_SIZE(db5500_platform_devs));
+
+        return parent;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7176ee7491ab..9bd8163896cf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -24,6 +24,7 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/usb.h>
+#include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
@@ -132,13 +133,13 @@ static resource_size_t __initdata db8500_gpio_base[] = {
         U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
         struct nmk_gpio_platform_data pdata = {
                 .supports_sleepmode = true,
         };
 
-        dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+        dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
                          IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -164,17 +165,44 @@ static int usb_db8500_tx_dma_cfg[] = {
         DB8500_DMA_DEV39_USB_OTG_OEP_8
 };
 
+static const char *db8500_read_soc_id(void)
+{
+        void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+
+        return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+                         readl((u32 *)uid+1),
+                         readl((u32 *)uid+1), readl((u32 *)uid+2),
+                         readl((u32 *)uid+3), readl((u32 *)uid+4));
+}
+
+static struct device * __init db8500_soc_device_init(void)
+{
+        const char *soc_id = db8500_read_soc_id();
+
+        return ux500_soc_device_init(soc_id);
+}
+
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device * __init u8500_init_devices(void)
 {
-        db8500_add_rtc();
-        db8500_add_gpios();
-        db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+        struct device *parent;
+        int i;
+
+        parent = db8500_soc_device_init();
+
+        db8500_add_rtc(parent);
+        db8500_add_gpios(parent);
+        db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+
+        platform_device_register_data(parent,
+                "cpufreq-u8500", -1, NULL, 0);
+
+        for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
+                platform_devs[i]->dev.parent = parent;
 
-        platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
         platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-        return ;
+        return parent;
 }
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index f41857494375..d11f3892a27d 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -2,6 +2,7 @@
  * Copyright (C) ST-Ericsson SA 2010
  *
  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
  */
 
@@ -11,10 +12,15 @@
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/mfd/db5500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
-#include <asm/localtimer.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -24,6 +30,11 @@
 
 void __iomem *_PRCMU_BASE;
 
+static const struct of_device_id ux500_dt_irq_match[] = {
+        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+        {},
+};
+
 void __init ux500_init_irq(void)
 {
         void __iomem *dist_base;
@@ -38,7 +49,12 @@ void __init ux500_init_irq(void)
         } else
                 ux500_unknown_soc();
 
-        gic_init(0, 29, dist_base, cpu_base);
+#ifdef CONFIG_OF
+        if (of_have_populated_dt())
+                of_irq_init(ux500_dt_irq_match);
+        else
+#endif
+                gic_init(0, 29, dist_base, cpu_base);
 
         /*
          * Init clocks here so that they are available for system timer
@@ -50,3 +66,73 @@ void __init ux500_init_irq(void)
                 db8500_prcmu_early_init();
         clk_init();
 }
+
+static const char * __init ux500_get_machine(void)
+{
+        return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
+}
+
+static const char * __init ux500_get_family(void)
+{
+        return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+        unsigned int rev = dbx500_revision();
+
+        if (rev == 0x01)
+                return kasprintf(GFP_KERNEL, "%s", "ED");
+        else if (rev >= 0xA0)
+                return kasprintf(GFP_KERNEL, "%d.%d",
+                                 (rev >> 4) - 0xA + 1, rev & 0xf);
+
+        return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t ux500_get_process(struct device *dev,
+                                        struct device_attribute *attr,
+                                        char *buf)
+{
+        if (dbx500_id.process == 0x00)
+                return sprintf(buf, "Standard\n");
+
+        return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+                                     const char *soc_id)
+{
+        soc_dev_attr->soc_id   = soc_id;
+        soc_dev_attr->machine  = ux500_get_machine();
+        soc_dev_attr->family   = ux500_get_family();
+        soc_dev_attr->revision = ux500_get_revision();
+}
+
+struct device_attribute ux500_soc_attr =
+        __ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
+
+struct device * __init ux500_soc_device_init(const char *soc_id)
+{
+        struct device *parent;
+        struct soc_device *soc_dev;
+        struct soc_device_attribute *soc_dev_attr;
+
+        soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+        if (!soc_dev_attr)
+                return ERR_PTR(-ENOMEM);
+
+        soc_info_populate(soc_dev_attr, soc_id);
+
+        soc_dev = soc_device_register(soc_dev_attr);
+        if (IS_ERR_OR_NULL(soc_dev)) {
+                kfree(soc_dev_attr);
+                return NULL;
+        }
+
+        parent = soc_device_to_device(soc_dev);
+        if (!IS_ERR_OR_NULL(parent))
+                device_create_file(parent, &ux500_soc_attr);
+
+        return parent;
+}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 898a64517b09..c5312a4b49f5 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-                       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+                       resource_size_t base, int irq, void *pdata,
+                       unsigned int periphid)
 {
         struct amba_device *dev;
         int ret;
@@ -39,6 +40,8 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
 
         dev->dev.platform_data = pdata;
 
+        dev->dev.parent = parent;
+
         ret = amba_device_add(dev, &iomem_resource);
         if (ret) {
                 amba_device_put(dev);
@@ -49,60 +52,7 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
 }
 
 static struct platform_device *
-dbx500_add_platform_device(const char *name, int id, void *pdata,
-                           struct resource *res, int resnum)
-{
-        struct platform_device *dev;
-        int ret;
-
-        dev = platform_device_alloc(name, id);
-        if (!dev)
-                return ERR_PTR(-ENOMEM);
-
-        dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-        dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
-
-        ret = platform_device_add_resources(dev, res, resnum);
-        if (ret)
-                goto out_free;
-
-        dev->dev.platform_data = pdata;
-
-        ret = platform_device_add(dev);
-        if (ret)
-                goto out_free;
-
-        return dev;
-
-out_free:
-        platform_device_put(dev);
-        return ERR_PTR(ret);
-}
-
-struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
-                                  resource_size_t base,
-                                  int irq, void *pdata)
-{
-        struct resource resources[] = {
-                [0] = {
-                        .start  = base,
-                        .end    = base + SZ_4K - 1,
-                        .flags  = IORESOURCE_MEM,
-                },
-                [1] = {
-                        .start  = irq,
-                        .end    = irq,
-                        .flags  = IORESOURCE_IRQ,
-                }
-        };
-
-        return dbx500_add_platform_device(name, id, pdata, resources,
-                                          ARRAY_SIZE(resources));
-}
-
-static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
                 struct nmk_gpio_platform_data *pdata)
 {
         struct resource resources[] = {
@@ -118,13 +68,18 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
                 }
         };
 
-        return platform_device_register_resndata(NULL, "gpio", id,
-                                resources, ARRAY_SIZE(resources),
-                                pdata, sizeof(*pdata));
+        return platform_device_register_resndata(
+                parent,
+                "gpio",
+                id,
+                resources,
+                ARRAY_SIZE(resources),
+                pdata,
+                sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-                      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+                      int irq, struct nmk_gpio_platform_data *pdata)
 {
         int first = 0;
         int i;
@@ -134,6 +89,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
                 pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
                 pdata->num_gpio = 32;
 
-                dbx500_add_gpio(i, base[i], irq, pdata);
+                dbx500_add_gpio(parent, i, base[i], irq, pdata);
         }
 }
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705033bf..39c74ec82add 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -8,80 +8,89 @@
 #ifndef __DEVICES_COMMON_H
 #define __DEVICES_COMMON_H
 
-extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-                       int irq, void *pdata, unsigned int periphid);
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
+#include <plat/i2c.h>
 
-extern struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
-                                  resource_size_t base,
-                                  int irq, void *pdata);
+extern struct amba_device *
+dbx500_add_amba_device(struct device *parent, const char *name,
+                       resource_size_t base, int irq, void *pdata,
+                       unsigned int periphid);
 
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+                   resource_size_t base, int irq,
                    struct spi_master_cntlr *pdata)
 {
-        return dbx500_add_amba_device(name, base, irq, pdata, 0);
+        return dbx500_add_amba_device(parent, name, base, irq,
+                                      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-               struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+               int irq, struct spi_master_cntlr *pdata,
                u32 periphid)
 {
-        return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+        return dbx500_add_amba_device(parent, name, base, irq,
+                                      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-               struct mmci_platform_data *pdata,
-               u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+               int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-        return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+        return dbx500_add_amba_device(parent, name, base, irq,
+                                      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-                struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+                int irq, struct amba_pl011_data *pdata)
 {
-        return dbx500_add_amba_device(name, base, irq, pdata, 0);
+        return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
-               struct nmk_i2c_controller *pdata)
-{
-        return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
-                                                 pdata);
-}
-
-struct msp_i2s_platform_data;
-
-static inline struct platform_device *
-dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
-                   struct msp_i2s_platform_data *pdata)
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
+               struct nmk_i2c_controller *data)
 {
-        return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
-                                                 pdata);
+        struct resource res[] = {
+                DEFINE_RES_MEM(base, SZ_4K),
+                DEFINE_RES_IRQ(irq),
+        };
+
+        struct platform_device_info pdevinfo = {
+                .parent = parent,
+                .name = "nmk-i2c",
+                .id = id,
+                .res = res,
+                .num_res = ARRAY_SIZE(res),
+                .data = data,
+                .size_data = sizeof(*data),
+                .dma_mask = DMA_BIT_MASK(32),
+        };
+
+        return platform_device_register_full(&pdevinfo);
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-        return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+        return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-                      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+                      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd02b90..e70955502c35 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-        dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-        dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-        dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+        dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+        dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+        dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-        dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-        dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-        dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+                           IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+                           IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+                           IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-        dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-        dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-        dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+                          IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+                          IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+                          IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-        dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+        dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-        ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+        ux500_add_usb(parent, U5500_USBOTG_BASE, \
+                      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-        dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+        dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+                       IRQ_DB5500_SDMMC0, pdata,        \
                        0x10480180)
-#define db5500_add_sdi1(pdata) \
-        dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+        dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+                       IRQ_DB5500_SDMMC1, pdata,        \
                        0x10480180)
-#define db5500_add_sdi2(pdata) \
-        dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+        dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+                       IRQ_DB5500_SDMMC2, pdata         \
                        0x10480180)
-#define db5500_add_sdi3(pdata) \
-        dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+        dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+                       IRQ_DB5500_SDMMC3, pdata         \
                        0x10480180)
-#define db5500_add_sdi4(pdata) \
-        dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+        dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+                       IRQ_DB5500_SDMMC4, pdata         \
                        0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-        dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+        dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+                       IRQ_DB5500_SPI0, pdata,          \
                        0x10080023)
-#define db5500_add_spi1(pdata) \
-        dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+        dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+                       IRQ_DB5500_SPI1, pdata,          \
                        0x10080023)
-#define db5500_add_spi2(pdata) \
-        dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+        dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+                       IRQ_DB5500_SPI2, pdata           \
                        0x10080023)
-#define db5500_add_spi3(pdata) \
-        dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+        dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+                       IRQ_DB5500_SPI3, pdata           \
                        0x10080023)
 
-#define db5500_add_uart0(plat) \
-        dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-        dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-        dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-        dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+        dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+                        IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+        dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+                        IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+        dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+                        IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+        dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+                        IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9ae8109..9fd93e9da529 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,88 +14,114 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+                      struct ske_keypad_platform_data *pdata,
+                      size_t size)
 {
-        return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
-                                                 U8500_SKE_BASE,
-                                                 IRQ_DB8500_KB, pdata);
+        struct resource resources[] = {
+                DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
+                DEFINE_RES_IRQ(IRQ_DB8500_KB),
+        };
+
+        return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
+                                                 resources, 2, pdata, size);
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-               struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+               int irq, struct pl022_ssp_controller *pdata)
 {
-        return dbx500_add_amba_device(name, base, irq, pdata, 0);
+        return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-        dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-        dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-        dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-        dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-        dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-        dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-        dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-        dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-        dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-        dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-        dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-        dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-        dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-        dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-        ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-        dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-        dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-        dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-        dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-        dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-        dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-        db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-        db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-        dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-        dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-        dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-        dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-        dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-        dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-        dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+        dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+        dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+        dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+        dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+        dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+        dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+        dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+        dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+        dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+                           IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+                           IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+                           IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+        dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+                           IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+        dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+        ux500_add_usb(parent, U8500_USBOTG_BASE, \
+                      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+        dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+                       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+        dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+                       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+        dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+                       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+        dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+                       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+        dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+                       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+        dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+                       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+        db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+                       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+        db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+                       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+        dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+                       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+        dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+                       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+        dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+                       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+        dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+                       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+        dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+                        IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+        dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+                        IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+        dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+                        IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68ae417..41e9470fa0e6 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
         .resource       = dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
         int ret;
 
+        dma40_device.dev.parent = parent;
         ret = platform_device_register(&dma40_device);
         if (ret)
                 dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 80e10f50282e..9ec20b96d8f2 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -161,4 +161,7 @@
 #define U8500_MODEM_BASE        0xe000000
 #define U8500_APE_BASE          0x6000000
 
+/* SoC identification number information */
+#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363fdb4cd..3dc00ffa7bfa 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,17 +18,16 @@ void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
-/* We re-use nomadik_timer for this platform */
-extern void nmdk_timer_init(void);
+extern struct device *ux500_soc_device_init(const char *soc_id);
 
 struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d418813..4c1cc50a595a 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
         bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-        int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+                   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
deleted file mode 100644
index 5ba113309a0b..000000000000
--- a/arch/arm/mach-ux500/localtimer.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
- *
- * This file is heavily based on relaview platform, almost a copy.
- *
- * Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-        evt->irq = IRQ_LOCALTIMER;
-        twd_timer_setup(evt);
-        return 0;
-}
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index aea467d04ff7..d37df98b5c32 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -7,29 +7,52 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/of.h>
 
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 
 #include <plat/mtu.h>
 
 #include <mach/setup.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
+                              U5500_TWD_BASE, IRQ_LOCALTIMER);
+static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
+                              U8500_TWD_BASE, IRQ_LOCALTIMER);
+
+static void __init ux500_twd_init(void)
+{
+        struct twd_local_timer *twd_local_timer;
+        int err;
+
+        twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
+                                           &u8500_twd_local_timer;
+
+        if (of_have_populated_dt())
+                twd_local_timer_of_register();
+        else {
+                err = twd_local_timer_register(twd_local_timer);
+                if (err)
+                        pr_err("twd_local_timer_register failed %d\n", err);
+        }
+}
+#else
+#define ux500_twd_init()        do { } while(0)
+#endif
 
 static void __init ux500_timer_init(void)
 {
+        void __iomem *mtu_timer_base;
         void __iomem *prcmu_timer_base;
 
         if (cpu_is_u5500()) {
-#ifdef CONFIG_LOCAL_TIMERS
-                twd_base = __io_address(U5500_TWD_BASE);
-#endif
-                mtu_base = __io_address(U5500_MTU0_BASE);
+                mtu_timer_base = __io_address(U5500_MTU0_BASE);
                 prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
         } else if (cpu_is_u8500()) {
-#ifdef CONFIG_LOCAL_TIMERS
-                twd_base = __io_address(U8500_TWD_BASE);
-#endif
-                mtu_base = __io_address(U8500_MTU0_BASE);
+                mtu_timer_base = __io_address(U8500_MTU0_BASE);
                 prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
         } else {
                 ux500_unknown_soc();
@@ -52,8 +75,9 @@ static void __init ux500_timer_init(void)
          *
          */
 
-        nmdk_timer_init();
+        nmdk_timer_init(mtu_timer_base);
         clksrc_dbx500_prcmu_init(prcmu_timer_base);
+        ux500_twd_init();
 }
 
 static void ux500_timer_reset(void)
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 9f9e1c203061..a74af389bc63 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,6 +7,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 #include <linux/dma-mapping.h>
+
 #include <plat/ste_dma40.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -140,8 +141,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
                 musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-        int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+                   int *dma_rx_cfg, int *dma_tx_cfg)
 {
         ux500_musb_device.resource[0].start = base;
         ux500_musb_device.resource[0].end = base + SZ_64K - 1;
@@ -151,5 +152,7 @@ void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
         ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
         ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
 
+        ux500_musb_device.dev.parent = parent;
+
         platform_device_register(&ux500_musb_device);
 }
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 73791f010297..c65cc3b462a5 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -42,15 +42,26 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 static void __init ct_ca9x4_map_io(void)
 {
         iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
-#ifdef CONFIG_LOCAL_TIMERS
-        twd_base = ioremap(A9_MPCORE_TWD, SZ_32);
-#endif
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
+
+static void __init ca9x4_twd_init(void)
+{
+        int err = twd_local_timer_register(&twd_local_timer);
+        if (err)
+                pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define ca9x4_twd_init()        do {} while(0)
+#endif
+
 static void __init ct_ca9x4_init_irq(void)
 {
         gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
                  ioremap(A9_MPCORE_GIC_CPU, SZ_256));
+        ca9x4_twd_init();
 }
 
 static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 6508e7694a4b..582641f3dc01 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,9 +1,7 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
-/* should be set by the platform code */
-extern void __iomem *mtu_base;
-
+void nmdk_timer_init(void __iomem *base);
 void nmdk_clkevt_reset(void);
 void nmdk_clksrc_reset(void);
 
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ad1b45b605a4..9222e5522a43 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -21,12 +21,6 @@
 #include <asm/sched_clock.h>
 
 /*
- * Guaranteed runtime conversion range in seconds for
- * the clocksource and clockevent.
- */
-#define MTU_MIN_RANGE 4
-
-/*
  * The MTU device hosts four different counters, with 4 set of
  * registers. These are register names.
  */
@@ -66,12 +60,11 @@
 #define MTU_PCELL2      0xff8
 #define MTU_PCELL3      0xffC
 
+static void __iomem *mtu_base;
 static bool clkevt_periodic;
 static u32 clk_prescale;
 static u32 nmdk_cycle;          /* write-once */
 
-void __iomem *mtu_base; /* Assigned by machine code */
-
 #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
 /*
  * Override the global weak sched_clock symbol with this
@@ -103,7 +96,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
 void nmdk_clkevt_reset(void)
 {
         if (clkevt_periodic) {
-
                 /* Timer: configure load and background-load, and fire it up */
                 writel(nmdk_cycle, mtu_base + MTU_LR(1));
                 writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
@@ -121,7 +113,6 @@ void nmdk_clkevt_reset(void)
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
                              struct clock_event_device *dev)
 {
-
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
                 clkevt_periodic = true;
@@ -183,15 +174,16 @@ void nmdk_clksrc_reset(void)
                mtu_base + MTU_CR(0));
 }
 
-void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void __iomem *base)
 {
         unsigned long rate;
         struct clk *clk0;
 
+        mtu_base = base;
         clk0 = clk_get_sys("mtu0", NULL);
         BUG_ON(IS_ERR(clk0));
-
-        clk_enable(clk0);
+        BUG_ON(clk_prepare(clk0) < 0);
+        BUG_ON(clk_enable(clk0) < 0);
 
         /*
          * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
@@ -224,17 +216,8 @@ void __init nmdk_timer_init(void)
         setup_sched_clock(nomadik_read_sched_clock, 32, rate);
 #endif
 
-        /* Timer 1 is used for events */
-
-        clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
-
-        nmdk_clkevt.max_delta_ns =
-                clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
-        nmdk_clkevt.min_delta_ns =
-                clockevent_delta2ns(0x00000002, &nmdk_clkevt);
-        nmdk_clkevt.cpumask     = cpumask_of(0);
-
-        /* Register irq and clockevents */
+        /* Timer 1 is used for events, register irq and clockevents */
         setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-        clockevents_register_device(&nmdk_clkevt);
+        nmdk_clkevt.cpumask = cpumask_of(0);
+        clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
 }
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 69714db47c33..a5cb1945bdcc 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,5 +1,4 @@
 obj-y   := clock.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
 obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
 obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
 obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c
deleted file mode 100644
index e15668793159..000000000000
--- a/arch/arm/plat-versatile/localtimer.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/localtimer.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-#include <mach/irqs.h>
-
-const static struct of_device_id twd_of_match[] __initconst = {
-       { .compatible = "arm,cortex-a9-twd-timer",      },
-       { .compatible = "arm,cortex-a5-twd-timer",      },
-       { .compatible = "arm,arm11mp-twd-timer",        },
-       { },
-};
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-#if defined(CONFIG_OF)
-        static int dt_node_probed;
-
-        /* Look for TWD node only once */
-        if (!dt_node_probed) {
-                struct device_node *node = of_find_matching_node(NULL,
-                                twd_of_match);
-
-                if (node)
-                        twd_base = of_iomap(node, 0);
-
-                dt_node_probed = 1;
-        }
-#endif
-        if (!twd_base)
-                return -ENXIO;
-
-        evt->irq = IRQ_LOCALTIMER;
-        twd_timer_setup(evt);
-        return 0;
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e0829a6a4660..ab39bb20a424 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -179,6 +179,9 @@ config ARCH_HAS_DEFAULT_IDLE
 config ARCH_HAS_CACHE_LINE_SIZE
         def_bool y
 
+config ARCH_HAS_CPU_AUTOPROBE
+        def_bool y
+
 config HAVE_SETUP_PER_CPU_AREA
         def_bool y
 
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 545d0ce59818..b3350bd32c60 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -28,6 +28,7 @@
 #include <crypto/aes.h>
 #include <crypto/cryptd.h>
 #include <crypto/ctr.h>
+#include <asm/cpu_device_id.h>
 #include <asm/i387.h>
 #include <asm/aes.h>
 #include <crypto/scatterwalk.h>
@@ -1253,14 +1254,19 @@ static struct crypto_alg __rfc4106_alg = {
 };
 #endif
 
+
+static const struct x86_cpu_id aesni_cpu_id[] = {
+        X86_FEATURE_MATCH(X86_FEATURE_AES),
+        {}
+};
+MODULE_DEVICE_TABLE(x86cpu, aesni_cpu_id);
+
 static int __init aesni_init(void)
 {
         int err;
 
-        if (!cpu_has_aes) {
-                printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
+        if (!x86_match_cpu(aesni_cpu_id))
                 return -ENODEV;
-        }
 
         if ((err = crypto_fpu_init()))
                 goto fpu_err;
diff --git a/arch/x86/crypto/crc32c-intel.c b/arch/x86/crypto/crc32c-intel.c
index b9d00261703c..493f959261f7 100644
--- a/arch/x86/crypto/crc32c-intel.c
+++ b/arch/x86/crypto/crc32c-intel.c
@@ -31,6 +31,7 @@
 #include <crypto/internal/hash.h>
 
 #include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
 
 #define CHKSUM_BLOCK_SIZE       1
 #define CHKSUM_DIGEST_SIZE      4
@@ -173,13 +174,17 @@ static struct shash_alg alg = {
         }
 };
 
+static const struct x86_cpu_id crc32c_cpu_id[] = {
+        X86_FEATURE_MATCH(X86_FEATURE_XMM4_2),
+        {}
+};
+MODULE_DEVICE_TABLE(x86cpu, crc32c_cpu_id);
 
 static int __init crc32c_intel_mod_init(void)
 {
-        if (cpu_has_xmm4_2)
-                return crypto_register_shash(&alg);
-        else
+        if (!x86_match_cpu(crc32c_cpu_id))
                 return -ENODEV;
+        return crypto_register_shash(&alg);
 }
 
 static void __exit crc32c_intel_mod_fini(void)
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index 976aa64d9a20..b4bf0a63b520 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -20,6 +20,7 @@
 #include <crypto/gf128mul.h>
 #include <crypto/internal/hash.h>
 #include <asm/i387.h>
+#include <asm/cpu_device_id.h>
 
 #define GHASH_BLOCK_SIZE        16
 #define GHASH_DIGEST_SIZE       16
@@ -294,15 +295,18 @@ static struct ahash_alg ghash_async_alg = {
         },
 };
 
+static const struct x86_cpu_id pcmul_cpu_id[] = {
+        X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ), /* Pickle-Mickle-Duck */
+        {}
+};
+MODULE_DEVICE_TABLE(x86cpu, pcmul_cpu_id);
+
 static int __init ghash_pclmulqdqni_mod_init(void)
 {
         int err;
 
-        if (!cpu_has_pclmulqdq) {
-                printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not"
-                       " detected.\n");
+        if (!x86_match_cpu(pcmul_cpu_id))
                 return -ENODEV;
-        }
 
         err = crypto_register_shash(&ghash_alg);
         if (err)
diff --git a/arch/x86/include/asm/cpu_device_id.h b/arch/x86/include/asm/cpu_device_id.h
new file mode 100644
index 000000000000..ff501e511d91
--- /dev/null
+++ b/arch/x86/include/asm/cpu_device_id.h
@@ -0,0 +1,13 @@
+#ifndef _CPU_DEVICE_ID
+#define _CPU_DEVICE_ID 1
+
+/*
+ * Declare drivers belonging to specific x86 CPUs
+ * Similar in spirit to pci_device_id and related PCI functions
+ */
+
+#include <linux/mod_devicetable.h>
+
+extern const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match);
+
+#endif
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 8d67d428b0f9..dcb839eebc76 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -177,6 +177,7 @@
 #define X86_FEATURE_PLN         (7*32+ 5) /* Intel Power Limit Notification */
 #define X86_FEATURE_PTS         (7*32+ 6) /* Intel Package Thermal Status */
 #define X86_FEATURE_DTS         (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_HW_PSTATE   (7*32+ 8) /* AMD HW-PState */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 25f24dccdcfa..6ab6aa2fdfdd 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -16,6 +16,7 @@ obj-y			:= intel_cacheinfo.o scattered.o topology.o
 obj-y                   += proc.o capflags.o powerflags.o common.o
 obj-y                   += vmware.o hypervisor.o sched.o mshyperv.o
 obj-y                   += rdrand.o
+obj-y                   += match.o
 
 obj-$(CONFIG_X86_32)    += bugs.o
 obj-$(CONFIG_X86_64)    += bugs_64.o
diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c
new file mode 100644
index 000000000000..940e2d483076
--- /dev/null
+++ b/arch/x86/kernel/cpu/match.c
@@ -0,0 +1,92 @@
+#include <asm/cpu_device_id.h>
+#include <asm/processor.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/**
+ * x86_match_cpu - match current CPU again an array of x86_cpu_ids
+ * @match: Pointer to array of x86_cpu_ids. Last entry terminated with
+ *         {}.
+ *
+ * Return the entry if the current CPU matches the entries in the
+ * passed x86_cpu_id match table. Otherwise NULL.  The match table
+ * contains vendor (X86_VENDOR_*), family, model and feature bits or
+ * respective wildcard entries.
+ *
+ * A typical table entry would be to match a specific CPU
+ * { X86_VENDOR_INTEL, 6, 0x12 }
+ * or to match a specific CPU feature
+ * { X86_FEATURE_MATCH(X86_FEATURE_FOOBAR) }
+ *
+ * Fields can be wildcarded with %X86_VENDOR_ANY, %X86_FAMILY_ANY,
+ * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
+ *
+ * Arrays used to match for this should also be declared using
+ * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ *
+ * This always matches against the boot cpu, assuming models and features are
+ * consistent over all CPUs.
+ */
+const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
+{
+        const struct x86_cpu_id *m;
+        struct cpuinfo_x86 *c = &boot_cpu_data;
+
+        for (m = match; m->vendor | m->family | m->model | m->feature; m++) {
+                if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor)
+                        continue;
+                if (m->family != X86_FAMILY_ANY && c->x86 != m->family)
+                        continue;
+                if (m->model != X86_MODEL_ANY && c->x86_model != m->model)
+                        continue;
+                if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature))
+                        continue;
+                return m;
+        }
+        return NULL;
+}
+EXPORT_SYMBOL(x86_match_cpu);
+
+ssize_t arch_print_cpu_modalias(struct device *dev,
+                                struct device_attribute *attr,
+                                char *bufptr)
+{
+        int size = PAGE_SIZE;
+        int i, n;
+        char *buf = bufptr;
+
+        n = snprintf(buf, size, "x86cpu:vendor:%04X:family:%04X:"
+                     "model:%04X:feature:",
+                boot_cpu_data.x86_vendor,
+                boot_cpu_data.x86,
+                boot_cpu_data.x86_model);
+        size -= n;
+        buf += n;
+        size -= 2;
+        for (i = 0; i < NCAPINTS*32; i++) {
+                if (boot_cpu_has(i)) {
+                        n = snprintf(buf, size, ",%04X", i);
+                        if (n < 0) {
+                                WARN(1, "x86 features overflow page\n");
+                                break;
+                        }
+                        size -= n;
+                        buf += n;
+                }
+        }
+        *buf++ = ',';
+        *buf++ = '\n';
+        return buf - bufptr;
+}
+
+int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+        char *buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+        if (buf) {
+                arch_print_cpu_modalias(NULL, NULL, buf);
+                add_uevent_var(env, "MODALIAS=%s", buf);
+                kfree(buf);
+        }
+        return 0;
+}
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index c7f64e6f537a..addf9e82a7f2 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -40,6 +40,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
                 { X86_FEATURE_EPB,              CR_ECX, 3, 0x00000006, 0 },
                 { X86_FEATURE_XSAVEOPT,         CR_EAX, 0, 0x0000000d, 1 },
                 { X86_FEATURE_CPB,              CR_EDX, 9, 0x80000007, 0 },
+                { X86_FEATURE_HW_PSTATE,        CR_EDX, 7, 0x80000007, 0 },
                 { X86_FEATURE_NPT,              CR_EDX, 0, 0x8000000a, 0 },
                 { X86_FEATURE_LBRV,             CR_EDX, 1, 0x8000000a, 0 },
                 { X86_FEATURE_SVML,             CR_EDX, 2, 0x8000000a, 0 },
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index fda91c307104..87a0f8688301 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -86,6 +86,7 @@
 
 #include <asm/microcode.h>
 #include <asm/processor.h>
+#include <asm/cpu_device_id.h>
 
 MODULE_DESCRIPTION("Microcode Update Driver");
 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
@@ -504,6 +505,20 @@ static struct notifier_block __refdata mc_cpu_notifier = {
         .notifier_call  = mc_cpu_callback,
 };
 
+#ifdef MODULE
+/* Autoload on Intel and AMD systems */
+static const struct x86_cpu_id microcode_id[] = {
+#ifdef CONFIG_MICROCODE_INTEL
+        { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+#ifdef CONFIG_MICROCODE_AMD
+        { X86_VENDOR_AMD, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+        {}
+};
+MODULE_DEVICE_TABLE(x86cpu, microcode_id);
+#endif
+
 static int __init microcode_init(void)
 {
         struct cpuinfo_x86 *c = &cpu_data(0);