482 files changed, 34512 insertions, 287 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index dc81b34c5d82..78a35e9dc104 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -109,3 +109,6 @@ config HAVE_CLK
 
 config HAVE_DMA_API_DEBUG
         bool
+
+config HAVE_DEFAULT_NO_SPIN_MUTEXES
+        bool
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 82428c2f234c..f56837f69ca7 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_BQ24022=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index c10d1aa4b487..ada93a8fc2ef 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -32,6 +32,7 @@
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000
+#define SZ_32K                          0x00008000
 #define SZ_64K                          0x00010000
 #define SZ_128K                         0x00020000
 #define SZ_256K                         0x00040000
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 793fe7b25f36..e6afff849b85 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
  /* USB Host */
 struct at91_usbh_data {
         u8              ports;          /* number of ports on root hub */
-        u8              vbus_pin[];     /* port power-control pin */
+        u8              vbus_pin[2];    /* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index dafe4f71d15f..336e51dc6127 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk)
 static int omap1_clk_enable(struct clk *clk)
 {
         int ret = 0;
+
         if (clk->usecount++ == 0) {
-                if (likely(clk->parent)) {
+                if (clk->parent) {
                         ret = omap1_clk_enable(clk->parent);
-
-                        if (unlikely(ret != 0)) {
-                                clk->usecount--;
-                                return ret;
-                        }
+                        if (ret)
+                                goto err;
 
                         if (clk->flags & CLOCK_NO_IDLE_PARENT)
                                 omap1_clk_deny_idle(clk->parent);
                 }
 
                 ret = clk->ops->enable(clk);
-
-                if (unlikely(ret != 0) && clk->parent) {
-                        omap1_clk_disable(clk->parent);
-                        clk->usecount--;
+                if (ret) {
+                        if (clk->parent)
+                                omap1_clk_disable(clk->parent);
+                        goto err;
                 }
         }
+        return ret;
 
+err:
+        clk->usecount--;
         return ret;
 }
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96a2006cb597..3e66d9099eab 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -343,6 +343,15 @@ config ARCH_PXA_PALM
         bool "PXA based Palm PDAs"
         select HAVE_PWM
 
+config MACH_PALMTE2
+        bool "Palm Tungsten|E2"
+        default y
+        depends on ARCH_PXA_PALM
+        select PXA25x
+        help
+          Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+          handheld computer.
+
 config MACH_PALMT5
         bool "Palm Tungsten|T5"
         default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c80e1bac4945..682dbf4e14b0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)         += e750.o
 obj-$(CONFIG_MACH_E400)         += e400.o
 obj-$(CONFIG_MACH_E800)         += e800.o
+obj-$(CONFIG_MACH_PALMTE2)      += palmte2.o
 obj-$(CONFIG_MACH_PALMT5)       += palmt5.o
 obj-$(CONFIG_MACH_PALMTX)       += palmtx.o
 obj-$(CONFIG_MACH_PALMLD)       += palmld.o
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 117b5435f8d5..b50ef39eabfc 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {}
 /* UCB1400 touchscreen controller */
 #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx2xx_ts_device = {
-        .name           = "ucb1400_ts",
+        .name           = "ucb1400_core",
         .id             = -1,
 };
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 10c2eaf93230..7c9c34c19ae2 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
@@ -32,12 +32,13 @@
 
 #if defined(CONFIG_AX88796)
 #define COLIBRI_ETH_IRQ_GPIO    mfp_to_gpio(GPIO26_GPIO)
+
 /*
  * Asix AX88796 Ethernet
  */
 static struct ax_plat_data colibri_asix_platdata = {
-        .flags          = AXFLG_MAC_FROMDEV,
-        .wordlength     = 2
+        .flags          = 0, /* defined later */
+        .wordlength     = 2,
 };
 
 static struct resource colibri_asix_resource[] = {
@@ -49,7 +50,7 @@ static struct resource colibri_asix_resource[] = {
         [1] = {
                 .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
                 .end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-                .flags = IORESOURCE_IRQ
+                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
         }
 };
 
@@ -70,8 +71,8 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
 
 static void __init colibri_pxa300_init_eth(void)
 {
+        colibri_pxa3xx_init_eth(&colibri_asix_platdata);
         pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
-        set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
         platform_device_register(&asix_device);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 55b74a7a6151..a18d37b3c5e6 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
@@ -38,8 +38,8 @@
  * Asix AX88796 Ethernet
  */
 static struct ax_plat_data colibri_asix_platdata = {
-        .flags          = AXFLG_MAC_FROMDEV,
-        .wordlength     = 2
+        .flags          = 0, /* defined later */
+        .wordlength     = 2,
 };
 
 static struct resource colibri_asix_resource[] = {
@@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = {
         [1] = {
                 .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
                 .end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-                .flags = IORESOURCE_IRQ
+                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
         }
 };
 
@@ -72,8 +72,8 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
 
 static void __init colibri_pxa320_init_eth(void)
 {
+        colibri_pxa3xx_init_eth(&colibri_asix_platdata);
         pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
-        set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
         platform_device_register(&asix_device);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 12d0afc54aa5..ea34e34f8cd8 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/etherdevice.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/sizes.h>
@@ -28,6 +29,40 @@
 #include "generic.h"
 #include "devices.h"
 
+#if defined(CONFIG_AX88796)
+#define ETHER_ADDR_LEN 6
+static u8 ether_mac_addr[ETHER_ADDR_LEN];
+
+void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
+{
+        int i;
+        u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
+
+        /*
+         * If the bootloader passed in a serial boot tag, which contains a
+         * valid ethernet MAC, pass it to the interface. Toradex ships the
+         * modules with their own bootloader which provides a valid MAC
+         * this way.
+         */
+
+        for (i = 0; i < ETHER_ADDR_LEN; i++) {
+                ether_mac_addr[i] = serial & 0xff;
+                serial >>= 8;
+        }
+
+        if (is_valid_ether_addr(ether_mac_addr)) {
+                plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
+                plat_data->mac_addr = ether_mac_addr;
+                printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
+                        __func__);
+        } else {
+                plat_data->flags |= AXFLG_MAC_FROMDEV;
+                printk(KERN_INFO "%s(): no valid serial boot tag found, "
+                        "taking MAC from device\n", __func__);
+        }
+}
+#endif
+
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static int mmc_detect_pin;
 
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
index 4a2a2952c374..5a221a49ea4d 100644
--- a/arch/arm/mach-pxa/csb701.c
+++ b/arch/arm/mach-pxa/csb701.c
@@ -5,6 +5,8 @@
 #include <linux/input.h>
 #include <linux/leds.h>
 
+#include <asm/mach-types.h>
+
 static struct gpio_keys_button csb701_buttons[] = {
         {
                 .code   = 0x7,
@@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
 
 static int __init csb701_init(void)
 {
+        if (!machine_is_csb726())
+                return -ENODEV;
+
         return platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 07500a04fd8c..a36fc17f671d 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -29,6 +29,7 @@
 #include <mach/udc.h>
 #include <mach/irda.h>
 #include <mach/irqs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "eseries.h"
@@ -197,6 +198,7 @@ static void __init e740_init(void)
         eseries_get_tmio_gpios();
         platform_add_devices(devices, ARRAY_SIZE(devices));
         pxa_set_udc_info(&e7xx_udc_mach_info);
+        pxa_set_ac97_info(NULL);
         e7xx_irda_init();
         pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 6126c04e02bc..1d00110590e5 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -28,6 +28,7 @@
 #include <mach/udc.h>
 #include <mach/irda.h>
 #include <mach/irqs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "eseries.h"
@@ -198,6 +199,7 @@ static void __init e750_init(void)
         eseries_get_tmio_gpios();
         platform_add_devices(devices, ARRAY_SIZE(devices));
         pxa_set_udc_info(&e7xx_udc_mach_info);
+        pxa_set_ac97_info(NULL);
         e7xx_irda_init();
         pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 74ab09812a72..9866c7b9e784 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -27,6 +27,7 @@
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irqs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "eseries.h"
@@ -199,6 +200,7 @@ static void __init e800_init(void)
         eseries_get_tmio_gpios();
         platform_add_devices(devices, ARRAY_SIZE(devices));
         pxa_set_udc_info(&e800_udc_mach_info);
+        pxa_set_ac97_info(NULL);
 }
 
 MACHINE_START(E800, "Toshiba e800")
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 920dfb8d36da..67611dadb44e 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -25,8 +25,10 @@
 #include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
+#include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
+#include <linux/delay.h>
 
 #include <media/soc_camera.h>
 
@@ -62,6 +64,8 @@
 #define GPIO93_CAM_RESET        (93)
 #define GPIO41_ETHIRQ           (41)
 #define EM_X270_ETHIRQ          IRQ_GPIO(GPIO41_ETHIRQ)
+#define GPIO115_WLAN_PWEN       (115)
+#define GPIO19_WLAN_STRAP       (19)
 
 static int mmc_cd;
 static int nand_rb;
@@ -159,8 +163,8 @@ static unsigned long common_pin_config[] = {
         GPIO57_SSP1_TXD,
 
         /* SSP2 */
-        GPIO19_SSP2_SCLK,
-        GPIO14_SSP2_SFRM,
+        GPIO19_GPIO,    /* SSP2 clock is used as GPIO for Libertas pin-strap */
+        GPIO14_GPIO,
         GPIO89_SSP2_TXD,
         GPIO88_SSP2_RXD,
 
@@ -648,20 +652,86 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
         .model = TDO35S,
 };
 
+static struct pxa2xx_spi_master em_x270_spi_2_info = {
+        .num_chipselect = 1,
+        .enable_dma     = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_libertas_chip = {
+        .rx_threshold   = 1,
+        .tx_threshold   = 1,
+        .timeout        = 1000,
+};
+
+static unsigned long em_x270_libertas_pin_config[] = {
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_GPIO,
+        GPIO89_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+};
+
+static int em_x270_libertas_setup(struct spi_device *spi)
+{
+        int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
+        if (err)
+                return err;
+
+        gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+        mdelay(100);
+
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
+
+        gpio_direction_output(GPIO115_WLAN_PWEN, 0);
+        mdelay(100);
+        gpio_set_value(GPIO115_WLAN_PWEN, 1);
+        mdelay(100);
+
+        spi->bits_per_word = 16;
+        spi_setup(spi);
+
+        return 0;
+}
+
+static int em_x270_libertas_teardown(struct spi_device *spi)
+{
+        gpio_set_value(GPIO115_WLAN_PWEN, 0);
+        gpio_free(GPIO115_WLAN_PWEN);
+
+        return 0;
+}
+
+struct libertas_spi_platform_data em_x270_libertas_pdata = {
+        .use_dummy_writes       = 1,
+        .gpio_cs                = 14,
+        .setup                  = em_x270_libertas_setup,
+        .teardown               = em_x270_libertas_teardown,
+};
+
 static struct spi_board_info em_x270_spi_devices[] __initdata = {
         {
-                .modalias = "tdo24m",
-                .max_speed_hz = 1000000,
-                .bus_num = 1,
-                .chip_select = 0,
-                .controller_data = &em_x270_tdo24m_chip,
-                .platform_data = &em_x270_tdo24m_pdata,
+                .modalias               = "tdo24m",
+                .max_speed_hz           = 1000000,
+                .bus_num                = 1,
+                .chip_select            = 0,
+                .controller_data        = &em_x270_tdo24m_chip,
+                .platform_data          = &em_x270_tdo24m_pdata,
+        },
+        {
+                .modalias               = "libertas_spi",
+                .max_speed_hz           = 13000000,
+                .bus_num                = 2,
+                .irq                    = IRQ_GPIO(116),
+                .chip_select            = 0,
+                .controller_data        = &em_x270_libertas_chip,
+                .platform_data          = &em_x270_libertas_pdata,
         },
 };
 
 static void __init em_x270_init_spi(void)
 {
         pxa2xx_set_spi_info(1, &em_x270_spi_info);
+        pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
         spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
 }
 #else
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 3f2a01d6a03c..90230c6f9925 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,5 +1,8 @@
 #ifndef _COLIBRI_H_
 #define _COLIBRI_H_
+
+#include <net/ax88796.h>
+
 /*
  * common settings for all modules
  */
@@ -16,6 +19,10 @@ extern void colibri_pxa3xx_init_lcd(int bl_pin);
 static inline void colibri_pxa3xx_init_lcd(int) {}
 #endif
 
+#if defined(CONFIG_AX88796)
+extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE      0xa0000000      /* SDRAM region */
 
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 82a399f3f9f2..20ef37d4a9a7 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -27,7 +27,7 @@
 #define GPIO22_MAGICIAN_VIBRA_EN                22
 #define GPIO26_MAGICIAN_GSM_POWER               26
 #define GPIO27_MAGICIAN_USBC_PUEN               27
-#define GPIO30_MAGICIAN_nCHARGE_EN              30
+#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN      30
 #define GPIO37_MAGICIAN_KEY_HANGUP              37
 #define GPIO38_MAGICIAN_KEY_CONTACTS            38
 #define GPIO40_MAGICIAN_GSM_OUT2                40
@@ -98,7 +98,7 @@
 #define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL      MAGICIAN_EGPIO(2, 2)
 #define EGPIO_MAGICIAN_FLASH_VPP                MAGICIAN_EGPIO(2, 3)
 #define EGPIO_MAGICIAN_BL_POWER2                MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_CHARGE_EN                MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_BQ24022_ISET2            MAGICIAN_EGPIO(2, 5)
 #define EGPIO_MAGICIAN_GSM_POWER                MAGICIAN_EGPIO(2, 7)
 
 /* input */
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 7c295a48d784..fb13c82ad6dc 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -87,6 +87,7 @@
 #define PALMLD_IDE_SIZE         0x00100000
 
 #define PALMLD_PHYS_IO_START    0x40000000
+#define PALMLD_STR_BASE         0xa0200000
 
 /* BATTERY */
 #define PALMLD_BAT_MAX_VOLTAGE          4000    /* 4.00V maximum voltage */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 94db2881f048..052bfe788ada 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -59,6 +59,7 @@
 /* Various addresses  */
 #define PALMT5_PHYS_RAM_START   0xa0000000
 #define PALMT5_PHYS_IO_START    0x40000000
+#define PALMT5_STR_BASE         0xa0200000
 
 /* TOUCHSCREEN */
 #define AC97_LINK_FRAME         21
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
new file mode 100644
index 000000000000..12361341f9d8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -0,0 +1,68 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
+ *
+ * Author:
+ *              Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTE2_H_
+#define _INCLUDE_PALMTE2_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTE2_POWER_DETECT            9
+#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N        4
+#define GPIO_NR_PALMTE2_EARPHONE_DETECT         15
+
+/* SD/MMC */
+#define GPIO_NR_PALMTE2_SD_DETECT_N             10
+#define GPIO_NR_PALMTE2_SD_POWER                55
+#define GPIO_NR_PALMTE2_SD_READONLY             51
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTE2_IR_DISABLE              48
+
+/* USB */
+#define GPIO_NR_PALMTE2_USB_DETECT_N            35
+#define GPIO_NR_PALMTE2_USB_PULLUP              53
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTE2_BL_POWER                56
+#define GPIO_NR_PALMTE2_LCD_POWER               37
+
+/* KEYS */
+#define GPIO_NR_PALMTE2_KEY_NOTES       5
+#define GPIO_NR_PALMTE2_KEY_TASKS       7
+#define GPIO_NR_PALMTE2_KEY_CALENDAR    11
+#define GPIO_NR_PALMTE2_KEY_CONTACTS    13
+#define GPIO_NR_PALMTE2_KEY_CENTER      14
+#define GPIO_NR_PALMTE2_KEY_LEFT        19
+#define GPIO_NR_PALMTE2_KEY_RIGHT       20
+#define GPIO_NR_PALMTE2_KEY_DOWN        21
+#define GPIO_NR_PALMTE2_KEY_UP          22
+
+/** HERE ARE INIT VALUES **/
+
+/* BACKLIGHT */
+#define PALMTE2_MAX_INTENSITY           0xFE
+#define PALMTE2_DEFAULT_INTENSITY       0x7E
+#define PALMTE2_LIMIT_MASK              0x7F
+#define PALMTE2_PRESCALER               0x3F
+#define PALMTE2_PERIOD_NS               3500
+
+/* BATTERY */
+#define PALMTE2_BAT_MAX_VOLTAGE         4000    /* 4.00v current voltage */
+#define PALMTE2_BAT_MIN_VOLTAGE         3550    /* 3.55v critical voltage */
+#define PALMTE2_BAT_MAX_CURRENT         0       /* unknokn */
+#define PALMTE2_BAT_MIN_CURRENT         0       /* unknown */
+#define PALMTE2_BAT_MAX_CHARGE          1       /* unknown */
+#define PALMTE2_BAT_MIN_CHARGE          1       /* unknown */
+#define PALMTE2_MAX_LIFE_MINS           360     /* on-life in minutes */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1e8bccbda510..9f7d62fb4cbb 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -78,6 +78,8 @@
 #define PALMTX_PHYS_RAM_START   0xa0000000
 #define PALMTX_PHYS_IO_START    0x40000000
 
+#define PALMTX_STR_BASE         0xa0200000
+
 #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS    /* ChipSelect 0 */
 #define PALMTX_PHYS_NAND_START  PXA_CS1_PHYS    /* ChipSelect 1 */
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index deeea1c2782b..c899bbd94dc0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,6 +25,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
 
 #include <mach/hardware.h>
@@ -552,33 +554,7 @@ static struct platform_device gpio_vbus = {
 
 static int power_supply_init(struct device *dev)
 {
-        int ret;
-
-        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
-        if (ret)
-                goto err_cs_ac;
-        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
-        if (ret)
-                goto err_cs_usb;
-        ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
-        if (ret)
-                goto err_chg_en;
-        ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
-        if (!ret)
-                ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
-        if (ret)
-                goto err_nchg_en;
-
-        return 0;
-
-err_nchg_en:
-        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
-err_chg_en:
-        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
-err_cs_usb:
-        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
-err_cs_ac:
-        return ret;
+        return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
 }
 
 static int magician_is_ac_online(void)
@@ -586,22 +562,8 @@ static int magician_is_ac_online(void)
         return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
 }
 
-static int magician_is_usb_online(void)
-{
-        return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB);
-}
-
-static void magician_set_charge(int flags)
-{
-        gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags);
-        gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-        gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
-        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
-        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
         gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
 }
 
@@ -612,8 +574,6 @@ static char *magician_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
         .init            = power_supply_init,
         .is_ac_online    = magician_is_ac_online,
-        .is_usb_online   = magician_is_usb_online,
-        .set_charge      = magician_set_charge,
         .exit            = power_supply_exit,
         .supplied_to     = magician_supplicants,
         .num_supplicants = ARRAY_SIZE(magician_supplicants),
@@ -646,6 +606,43 @@ static struct platform_device power_supply = {
         .num_resources = ARRAY_SIZE(power_supply_resources),
 };
 
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+        {
+                .dev = &gpio_vbus.dev,
+                .supply = "vbus_draw",
+        },
+        {
+                .dev = &power_supply.dev,
+                .supply = "ac_draw",
+        },
+};
+
+static struct regulator_init_data bq24022_init_data = {
+        .constraints = {
+                .max_uA         = 500000,
+                .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+        },
+        .num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
+        .consumer_supplies      = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+        .gpio_nce   = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+        .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
+        .init_data  = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+        .name = "bq24022",
+        .id   = -1,
+        .dev  = {
+                .platform_data = &bq24022_info,
+        },
+};
 
 /*
  * MMC/SD
@@ -756,6 +753,7 @@ static struct platform_device *devices[] __initdata = {
         &egpio,
         &backlight,
         &pasic3,
+        &bq24022,
         &gpio_vbus,
         &power_supply,
         &strataflash,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 97c93a7a285c..9203b069b35c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -50,6 +50,7 @@
 #include <mach/pxa27x-udc.h>
 #include <mach/i2c.h>
 #include <mach/camera.h>
+#include <mach/audio.h>
 #include <media/soc_camera.h>
 
 #include <mach/mioa701.h>
@@ -763,8 +764,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
                 &mioa701_backlight_data);
 MIO_SIMPLE_DEV(mioa701_led,       "leds-gpio",      &gpio_led_info)
 MIO_SIMPLE_DEV(pxa2xx_pcm,        "pxa2xx-pcm",     NULL)
-MIO_SIMPLE_DEV(pxa2xx_ac97,       "pxa2xx-ac97",    NULL)
-MIO_PARENT_DEV(mio_wm9713_codec,  "wm9713-codec",   &pxa2xx_ac97.dev, NULL)
 MIO_SIMPLE_DEV(mioa701_sound,     "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,     "mioa701-board",  NULL)
 MIO_SIMPLE_DEV(gpio_vbus,         "gpio-vbus",      &gpio_vbus_data);
@@ -774,8 +773,6 @@ static struct platform_device *devices[] __initdata = {
         &mioa701_backlight,
         &mioa701_led,
         &pxa2xx_pcm,
-        &pxa2xx_ac97,
-        &mio_wm9713_codec,
         &mioa701_sound,
         &power_dev,
         &strataflash,
@@ -818,6 +815,7 @@ static void __init mioa701_machine_init(void)
         pxa_set_keypad_info(&mioa701_keypad_info);
         wm97xx_bat_set_pdata(&mioa701_battery_data);
         pxa_set_udc_info(&mioa701_udc_info);
+        pxa_set_ac97_info(NULL);
         pm_power_off = mioa701_poweroff;
         arm_pm_restart = mioa701_restart;
         platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 8587477a9bb7..ecf5910e39d7 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = {
         GPIO47_FICP_TXD,
 
         /* MATRIX KEYPAD */
-        GPIO100_KP_MKIN_0,
-        GPIO101_KP_MKIN_1,
-        GPIO102_KP_MKIN_2,
-        GPIO97_KP_MKIN_3,
+        GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
         GPIO103_KP_MKOUT_0,
         GPIO104_KP_MKOUT_1,
         GPIO105_KP_MKOUT_2,
@@ -507,6 +508,33 @@ static struct pxafb_mach_info palmld_lcd_screen = {
 };
 
 /******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+        0xe3a00101,     /* mov  r0,     #0x40000000 */
+        0xe380060f,     /* orr  r0, r0, #0x00f00000 */
+        0xe590f008,     /* ldr  pc, [r0, #0x08] */
+};
+
+static int __init palmld_pm_init(void)
+{
+        int i;
+
+        /* this is where the bootloader jumps */
+        addr = phys_to_virt(PALMLD_STR_BASE);
+
+        for (i = 0; i < 3; i++)
+                addr[i] = resume[i];
+
+        return 0;
+}
+
+device_initcall(palmld_pm_init);
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9521c7b33492..0680f1a575a3 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -75,10 +75,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
         GPIO95_GPIO,    /* usb power */
 
         /* MATRIX KEYPAD */
-        GPIO100_KP_MKIN_0,
-        GPIO101_KP_MKIN_1,
-        GPIO102_KP_MKIN_2,
-        GPIO97_KP_MKIN_3,
+        GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
         GPIO103_KP_MKOUT_0,
         GPIO104_KP_MKOUT_1,
         GPIO105_KP_MKOUT_2,
@@ -450,6 +450,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
 };
 
 /******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+        0xe3a00101,     /* mov  r0,     #0x40000000 */
+        0xe380060f,     /* orr  r0, r0, #0x00f00000 */
+        0xe590f008,     /* ldr  pc, [r0, #0x08] */
+};
+
+static int __init palmt5_pm_init(void)
+{
+        int i;
+
+        /* this is where the bootloader jumps */
+        addr = phys_to_virt(PALMT5_STR_BASE);
+
+        for (i = 0; i < 3; i++)
+                addr[i] = resume[i];
+
+        return 0;
+}
+
+device_initcall(palmt5_pm_init);
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
new file mode 100644
index 000000000000..43fcf2e86887
--- /dev/null
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -0,0 +1,466 @@
+/*
+ * Hardware definitions for Palm Tungsten|E2
+ *
+ * Author:
+ *      Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * Rewrite for mainline:
+ *      Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmte2.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmte2_pin_config[] __initdata = {
+        /* MMC */
+        GPIO6_MMC_CLK,
+        GPIO8_MMC_CS0,
+        GPIO10_GPIO,    /* SD detect */
+        GPIO55_GPIO,    /* SD power */
+        GPIO51_GPIO,    /* SD r/o switch */
+
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
+        /* PWM */
+        GPIO16_PWM0_OUT,
+
+        /* USB */
+        GPIO15_GPIO,    /* usb detect */
+        GPIO53_GPIO,    /* usb power */
+
+        /* IrDA */
+        GPIO48_GPIO,    /* ir disable */
+        GPIO46_FICP_RXD,
+        GPIO47_FICP_TXD,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* GPIO KEYS */
+        GPIO5_GPIO,     /* notes */
+        GPIO7_GPIO,     /* tasks */
+        GPIO11_GPIO,    /* calendar */
+        GPIO13_GPIO,    /* contacts */
+        GPIO14_GPIO,    /* center */
+        GPIO19_GPIO,    /* left */
+        GPIO20_GPIO,    /* right */
+        GPIO21_GPIO,    /* down */
+        GPIO22_GPIO,    /* up */
+
+        /* MISC */
+        GPIO1_RST,      /* reset */
+        GPIO4_GPIO,     /* Hotsync button */
+        GPIO9_GPIO,     /* power detect */
+        GPIO37_GPIO,    /* LCD power */
+        GPIO56_GPIO,    /* Backlight power */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmte2_mci_init(struct device *dev,
+                                irq_handler_t palmte2_detect_int, void *data)
+{
+        int err = 0;
+
+        /* Setup an interrupt for detecting card insert/remove events */
+        err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
+        if (err)
+                goto err;
+        err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
+        if (err)
+                goto err2;
+        err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
+                        palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+                        IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+                        "SD/MMC card detect", data);
+        if (err) {
+                printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+                                __func__);
+                goto err2;
+        }
+
+        err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
+        if (err)
+                goto err3;
+        err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
+        if (err)
+                goto err4;
+
+        err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
+        if (err)
+                goto err4;
+        err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
+        if (err)
+                goto err5;
+
+        printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+        return 0;
+
+err5:
+        gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+err4:
+        gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+err3:
+        free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+err2:
+        gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+err:
+        return err;
+}
+
+static void palmte2_mci_exit(struct device *dev, void *data)
+{
+        gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+        gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+        free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+        gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+}
+
+static void palmte2_mci_power(struct device *dev, unsigned int vdd)
+{
+        struct pxamci_platform_data *p_d = dev->platform_data;
+        gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmte2_mci_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmte2_mci_platform_data = {
+        .ocr_mask       = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .setpower       = palmte2_mci_power,
+        .get_ro         = palmte2_mci_get_ro,
+        .init           = palmte2_mci_init,
+        .exit           = palmte2_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmte2_pxa_buttons[] = {
+        {KEY_F1,        GPIO_NR_PALMTE2_KEY_CONTACTS,   1, "Contacts" },
+        {KEY_F2,        GPIO_NR_PALMTE2_KEY_CALENDAR,   1, "Calendar" },
+        {KEY_F3,        GPIO_NR_PALMTE2_KEY_TASKS,      1, "Tasks" },
+        {KEY_F4,        GPIO_NR_PALMTE2_KEY_NOTES,      1, "Notes" },
+        {KEY_ENTER,     GPIO_NR_PALMTE2_KEY_CENTER,     1, "Center" },
+        {KEY_LEFT,      GPIO_NR_PALMTE2_KEY_LEFT,       1, "Left" },
+        {KEY_RIGHT,     GPIO_NR_PALMTE2_KEY_RIGHT,      1, "Right" },
+        {KEY_DOWN,      GPIO_NR_PALMTE2_KEY_DOWN,       1, "Down" },
+        {KEY_UP,        GPIO_NR_PALMTE2_KEY_UP,         1, "Up" },
+};
+
+static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
+        .buttons        = palmte2_pxa_buttons,
+        .nbuttons       = ARRAY_SIZE(palmte2_pxa_buttons),
+};
+
+static struct platform_device palmte2_pxa_keys = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &palmte2_pxa_keys_data,
+        },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmte2_backlight_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
+        if (ret)
+                goto err;
+        ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
+        if (ret)
+                goto err2;
+        ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
+        if (ret)
+                goto err2;
+        ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
+        if (ret)
+                goto err3;
+
+        return 0;
+err3:
+        gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+err2:
+        gpio_free(GPIO_NR_PALMTE2_BL_POWER);
+err:
+        return ret;
+}
+
+static int palmte2_backlight_notify(int brightness)
+{
+        gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
+        gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
+        return brightness;
+}
+
+static void palmte2_backlight_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTE2_BL_POWER);
+        gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmte2_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = PALMTE2_MAX_INTENSITY,
+        .dft_brightness = PALMTE2_MAX_INTENSITY,
+        .pwm_period_ns  = PALMTE2_PERIOD_NS,
+        .init           = palmte2_backlight_init,
+        .notify         = palmte2_backlight_notify,
+        .exit           = palmte2_backlight_exit,
+};
+
+static struct platform_device palmte2_backlight = {
+        .name   = "pwm-backlight",
+        .dev    = {
+                .parent         = &pxa25x_device_pwm0.dev,
+                .platform_data  = &palmte2_backlight_data,
+        },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmte2_irda_startup(struct device *dev)
+{
+        int err;
+        err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
+        if (err)
+                goto err;
+        err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
+        if (err)
+                gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
+err:
+        return err;
+}
+
+static void palmte2_irda_shutdown(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
+}
+
+static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmte2_ficp_platform_data = {
+        .startup                = palmte2_irda_startup,
+        .shutdown               = palmte2_irda_shutdown,
+        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+        .transceiver_mode       = palmte2_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+        .gpio_vbus              = GPIO_NR_PALMTE2_USB_DETECT_N,
+        .gpio_vbus_inverted     = 1,
+        .gpio_pullup            = GPIO_NR_PALMTE2_USB_PULLUP,
+        .gpio_pullup_inverted   = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
+        if (ret)
+                goto err1;
+        ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
+        if (ret)
+                goto err2;
+
+        return 0;
+
+err2:
+        gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+err1:
+        return ret;
+}
+
+static int palmte2_is_ac_online(void)
+{
+        return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static char *palmte2_supplicants[] = {
+        "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
+        .is_ac_online    = palmte2_is_ac_online,
+        .exit            = power_supply_exit,
+        .supplied_to     = palmte2_supplicants,
+        .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
+};
+
+static struct platform_device power_supply = {
+        .name = "pda-power",
+        .id   = -1,
+        .dev  = {
+                .platform_data = &power_supply_info,
+        },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+        .batt_aux       = WM97XX_AUX_ID3,
+        .temp_aux       = WM97XX_AUX_ID2,
+        .charge_gpio    = -1,
+        .max_voltage    = PALMTE2_BAT_MAX_VOLTAGE,
+        .min_voltage    = PALMTE2_BAT_MIN_VOLTAGE,
+        .batt_mult      = 1000,
+        .batt_div       = 414,
+        .temp_mult      = 1,
+        .temp_div       = 1,
+        .batt_tech      = POWER_SUPPLY_TECHNOLOGY_LIPO,
+        .batt_name      = "main-batt",
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmte2_lcd_modes[] = {
+{
+        .pixclock       = 77757,
+        .xres           = 320,
+        .yres           = 320,
+        .bpp            = 16,
+
+        .left_margin    = 28,
+        .right_margin   = 7,
+        .upper_margin   = 7,
+        .lower_margin   = 5,
+
+        .hsync_len      = 4,
+        .vsync_len      = 1,
+},
+};
+
+static struct pxafb_mach_info palmte2_lcd_screen = {
+        .modes          = palmte2_lcd_modes,
+        .num_modes      = ARRAY_SIZE(palmte2_lcd_modes),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &palmte2_pxa_keys,
+#endif
+        &palmte2_backlight,
+        &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmte2_udc_init(void)
+{
+        if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
+                gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
+                gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
+        }
+}
+
+static void __init palmte2_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+
+        set_pxa_fb_info(&palmte2_lcd_screen);
+        pxa_set_mci_info(&palmte2_mci_platform_data);
+        palmte2_udc_init();
+        pxa_set_udc_info(&palmte2_udc_info);
+        pxa_set_ac97_info(NULL);
+        pxa_set_ficp_info(&palmte2_ficp_platform_data);
+        wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTE2, "Palm Tungsten|E2")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = palmte2_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b490c0924619..59d0c1cba556 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -93,10 +93,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO116_GPIO,   /* wifi ready */
 
         /* MATRIX KEYPAD */
-        GPIO100_KP_MKIN_0,
-        GPIO101_KP_MKIN_1,
-        GPIO102_KP_MKIN_2,
-        GPIO97_KP_MKIN_3,
+        GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+        GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
         GPIO103_KP_MKOUT_0,
         GPIO104_KP_MKOUT_1,
         GPIO105_KP_MKOUT_2,
@@ -459,6 +459,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 };
 
 /******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+        0xe3a00101,     /* mov  r0,     #0x40000000 */
+        0xe380060f,     /* orr  r0, r0, #0x00f00000 */
+        0xe590f008,     /* ldr  pc, [r0, #0x08] */
+};
+
+static int __init palmtx_pm_init(void)
+{
+        int i;
+
+        /* this is where the bootloader jumps */
+        addr = phys_to_virt(PALMTX_STR_BASE);
+
+        for (i = 0; i < 3; i++)
+                addr[i] = resume[i];
+
+        return 0;
+}
+
+device_initcall(palmtx_pm_init);
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6e8ade6ae339..afac5b6d3d78 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -45,6 +45,7 @@
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
 #include <mach/pxa2xx_spi.h>
+#include <mach/audio.h>
 
 #include <asm/mach/arch.h>
 #include <mach/tosa.h>
@@ -914,6 +915,7 @@ static void __init tosa_init(void)
         pxa_set_udc_info(&udc_info);
         pxa_set_ficp_info(&tosa_ficp_platform_data);
         pxa_set_i2c_info(NULL);
+        pxa_set_ac97_info(NULL);
         platform_scoop_config = &tosa_pcmcia_config;
 
         pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b438fc4fb77b..e6344ece00ce 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat)
                                 BOOTMEM_DEFAULT);
         }
 
+        if (machine_is_palmld() || machine_is_palmtx()) {
+                reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
+                                BOOTMEM_EXCLUSIVE);
+                reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
+                                BOOTMEM_EXCLUSIVE);
+        }
+
+        if (machine_is_palmt5())
+                reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
+                                BOOTMEM_EXCLUSIVE);
+
 #ifdef CONFIG_SA1111
         /*
          * Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
new file mode 100644
index 000000000000..0f8956def738
--- /dev/null
+++ b/arch/frv/include/asm/Kbuild
@@ -0,0 +1,5 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += registers.h
+
+unifdef-y += termios.h
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
new file mode 100644
index 000000000000..296c35cfb207
--- /dev/null
+++ b/arch/frv/include/asm/atomic.h
@@ -0,0 +1,198 @@
+/* atomic.h: atomic operation emulation for FR-V
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/types.h>
+#include <asm/spr-regs.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * We do not have SMP systems, so we don't have to deal with that.
+ */
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+
+#define ATOMIC_INIT(i)          { (i) }
+#define atomic_read(v)          ((v)->counter)
+#define atomic_set(v, i)        (((v)->counter) = (i))
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+        unsigned long val;
+
+        asm("0:                                         \n"
+            "   orcc            gr0,gr0,gr0,icc3        \n"     /* set ICC3.Z */
+            "   ckeq            icc3,cc7                \n"
+            "   ld.p            %M0,%1                  \n"     /* LD.P/ORCR must be atomic */
+            "   orcr            cc7,cc7,cc3             \n"     /* set CC3 to true */
+            "   add%I2          %1,%2,%1                \n"
+            "   cst.p           %1,%M0          ,cc3,#1 \n"
+            "   corcc           gr29,gr29,gr0   ,cc3,#1 \n"     /* clear ICC3.Z if store happens */
+            "   beq             icc3,#0,0b              \n"
+            : "+U"(v->counter), "=&r"(val)
+            : "NPr"(i)
+            : "memory", "cc7", "cc3", "icc3"
+            );
+
+        return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+        unsigned long val;
+
+        asm("0:                                         \n"
+            "   orcc            gr0,gr0,gr0,icc3        \n"     /* set ICC3.Z */
+            "   ckeq            icc3,cc7                \n"
+            "   ld.p            %M0,%1                  \n"     /* LD.P/ORCR must be atomic */
+            "   orcr            cc7,cc7,cc3             \n"     /* set CC3 to true */
+            "   sub%I2          %1,%2,%1                \n"
+            "   cst.p           %1,%M0          ,cc3,#1 \n"
+            "   corcc           gr29,gr29,gr0   ,cc3,#1 \n"     /* clear ICC3.Z if store happens */
+            "   beq             icc3,#0,0b              \n"
+            : "+U"(v->counter), "=&r"(val)
+            : "NPr"(i)
+            : "memory", "cc7", "cc3", "icc3"
+            );
+
+        return val;
+}
+
+#else
+
+extern int atomic_add_return(int i, atomic_t *v);
+extern int atomic_sub_return(int i, atomic_t *v);
+
+#endif
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+        return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+        atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+        atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+        atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+        atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)            atomic_sub_return(1, (v))
+#define atomic_inc_return(v)            atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)        (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)          (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)          (atomic_add_return(1, (v)) == 0)
+
+/*****************************************************************************/
+/*
+ * exchange value with memory
+ */
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define xchg(ptr, x)                                                            \
+({                                                                              \
+        __typeof__(ptr) __xg_ptr = (ptr);                                       \
+        __typeof__(*(ptr)) __xg_orig;                                           \
+                                                                                \
+        switch (sizeof(__xg_orig)) {                                            \
+        case 4:                                                                 \
+                asm volatile(                                                   \
+                        "swap%I0 %M0,%1"                                        \
+                        : "+m"(*__xg_ptr), "=r"(__xg_orig)                      \
+                        : "1"(x)                                                \
+                        : "memory"                                              \
+                        );                                                      \
+                break;                                                          \
+                                                                                \
+        default:                                                                \
+                __xg_orig = (__typeof__(__xg_orig))0;                           \
+                asm volatile("break");                                          \
+                break;                                                          \
+        }                                                                       \
+                                                                                \
+        __xg_orig;                                                              \
+})
+
+#else
+
+extern uint32_t __xchg_32(uint32_t i, volatile void *v);
+
+#define xchg(ptr, x)                                                                            \
+({                                                                                              \
+        __typeof__(ptr) __xg_ptr = (ptr);                                                       \
+        __typeof__(*(ptr)) __xg_orig;                                                           \
+                                                                                                \
+        switch (sizeof(__xg_orig)) {                                                            \
+        case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr);     break;  \
+        default:                                                                                \
+                __xg_orig = (__typeof__(__xg_orig))0;                                                                   \
+                asm volatile("break");                                                          \
+                break;                                                                          \
+        }                                                                                       \
+        __xg_orig;                                                                              \
+})
+
+#endif
+
+#define tas(ptr) (xchg((ptr), 1))
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+        int c, old;
+        c = atomic_read(v);
+        for (;;) {
+                if (unlikely(c == (u)))
+                        break;
+                old = atomic_cmpxchg((v), c, c + (a));
+                if (likely(old == c))
+                        break;
+                c = old;
+        }
+        return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/frv/include/asm/auxvec.h b/arch/frv/include/asm/auxvec.h
new file mode 100644
index 000000000000..07710778fa10
--- /dev/null
+++ b/arch/frv/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __FRV_AUXVEC_H
+#define __FRV_AUXVEC_H
+
+#endif
diff --git a/arch/frv/include/asm/ax88796.h b/arch/frv/include/asm/ax88796.h
new file mode 100644
index 000000000000..637e980393c5
--- /dev/null
+++ b/arch/frv/include/asm/ax88796.h
@@ -0,0 +1,22 @@
+/* ax88796.h: access points to the driver for the AX88796 NE2000 clone
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_AX88796_H
+#define _ASM_AX88796_H
+
+#include <asm/mb-regs.h>
+
+#define AX88796_IOADDR          (__region_CS1 + 0x200)
+#define AX88796_IRQ             IRQ_CPU_EXTERNAL7
+#define AX88796_FULL_DUPLEX     0                       /* force full duplex */
+#define AX88796_BUS_INFO        "CS1#+0x200"            /* bus info for ethtool */
+
+#endif /* _ASM_AX88796_H */
diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h
new file mode 100644
index 000000000000..287f6f697ce2
--- /dev/null
+++ b/arch/frv/include/asm/bitops.h
@@ -0,0 +1,412 @@
+/* bitops.h: bit operations for the Fujitsu FR-V CPUs
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline
+unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v)
+{
+        unsigned long old, tmp;
+
+        asm volatile(
+                "0:                                             \n"
+                "       orcc            gr0,gr0,gr0,icc3        \n"     /* set ICC3.Z */
+                "       ckeq            icc3,cc7                \n"
+                "       ld.p            %M0,%1                  \n"     /* LD.P/ORCR are atomic */
+                "       orcr            cc7,cc7,cc3             \n"     /* set CC3 to true */
+                "       and%I3          %1,%3,%2                \n"
+                "       cst.p           %2,%M0          ,cc3,#1 \n"     /* if store happens... */
+                "       corcc           gr29,gr29,gr0   ,cc3,#1 \n"     /* ... clear ICC3.Z */
+                "       beq             icc3,#0,0b              \n"
+                : "+U"(*v), "=&r"(old), "=r"(tmp)
+                : "NPr"(~mask)
+                : "memory", "cc7", "cc3", "icc3"
+                );
+
+        return old;
+}
+
+static inline
+unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v)
+{
+        unsigned long old, tmp;
+
+        asm volatile(
+                "0:                                             \n"
+                "       orcc            gr0,gr0,gr0,icc3        \n"     /* set ICC3.Z */
+                "       ckeq            icc3,cc7                \n"
+                "       ld.p            %M0,%1                  \n"     /* LD.P/ORCR are atomic */
+                "       orcr            cc7,cc7,cc3             \n"     /* set CC3 to true */
+                "       or%I3           %1,%3,%2                \n"
+                "       cst.p           %2,%M0          ,cc3,#1 \n"     /* if store happens... */
+                "       corcc           gr29,gr29,gr0   ,cc3,#1 \n"     /* ... clear ICC3.Z */
+                "       beq             icc3,#0,0b              \n"
+                : "+U"(*v), "=&r"(old), "=r"(tmp)
+                : "NPr"(mask)
+                : "memory", "cc7", "cc3", "icc3"
+                );
+
+        return old;
+}
+
+static inline
+unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v)
+{
+        unsigned long old, tmp;
+
+        asm volatile(
+                "0:                                             \n"
+                "       orcc            gr0,gr0,gr0,icc3        \n"     /* set ICC3.Z */
+                "       ckeq            icc3,cc7                \n"
+                "       ld.p            %M0,%1                  \n"     /* LD.P/ORCR are atomic */
+                "       orcr            cc7,cc7,cc3             \n"     /* set CC3 to true */
+                "       xor%I3          %1,%3,%2                \n"
+                "       cst.p           %2,%M0          ,cc3,#1 \n"     /* if store happens... */
+                "       corcc           gr29,gr29,gr0   ,cc3,#1 \n"     /* ... clear ICC3.Z */
+                "       beq             icc3,#0,0b              \n"
+                : "+U"(*v), "=&r"(old), "=r"(tmp)
+                : "NPr"(mask)
+                : "memory", "cc7", "cc3", "icc3"
+                );
+
+        return old;
+}
+
+#else
+
+extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v);
+
+#endif
+
+#define atomic_clear_mask(mask, v)      atomic_test_and_ANDNOT_mask((mask), (v))
+#define atomic_set_mask(mask, v)        atomic_test_and_OR_mask((mask), (v))
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+        volatile unsigned long *ptr = addr;
+        unsigned long mask = 1UL << (nr & 31);
+        ptr += nr >> 5;
+        return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+        volatile unsigned long *ptr = addr;
+        unsigned long mask = 1UL << (nr & 31);
+        ptr += nr >> 5;
+        return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+        volatile unsigned long *ptr = addr;
+        unsigned long mask = 1UL << (nr & 31);
+        ptr += nr >> 5;
+        return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+        test_and_clear_bit(nr, addr);
+}
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+        test_and_set_bit(nr, addr);
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+        test_and_change_bit(nr, addr);
+}
+
+static inline void __clear_bit(int nr, volatile void * addr)
+{
+        volatile unsigned long *a = addr;
+        int mask;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 31);
+        *a &= ~mask;
+}
+
+static inline void __set_bit(int nr, volatile void * addr)
+{
+        volatile unsigned long *a = addr;
+        int mask;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 31);
+        *a |= mask;
+}
+
+static inline void __change_bit(int nr, volatile void *addr)
+{
+        volatile unsigned long *a = addr;
+        int mask;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 31);
+        *a ^= mask;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile void * addr)
+{
+        volatile unsigned long *a = addr;
+        int mask, retval;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 31);
+        retval = (mask & *a) != 0;
+        *a &= ~mask;
+        return retval;
+}
+
+static inline int __test_and_set_bit(int nr, volatile void * addr)
+{
+        volatile unsigned long *a = addr;
+        int mask, retval;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 31);
+        retval = (mask & *a) != 0;
+        *a |= mask;
+        return retval;
+}
+
+static inline int __test_and_change_bit(int nr, volatile void * addr)
+{
+        volatile unsigned long *a = addr;
+        int mask, retval;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 31);
+        retval = (mask & *a) != 0;
+        *a ^= mask;
+        return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __constant_test_bit(int nr, const volatile void * addr)
+{
+        return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static inline int __test_bit(int nr, const volatile void * addr)
+{
+        int     * a = (int *) addr;
+        int     mask;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+#define fls(x)                                          \
+({                                                      \
+        int bit;                                        \
+                                                        \
+        asm("   subcc   %1,gr0,gr0,icc0         \n"     \
+            "   ckne    icc0,cc4                \n"     \
+            "   cscan.p %1,gr0,%0       ,cc4,#1 \n"     \
+            "   csub    %0,%0,%0        ,cc4,#0 \n"     \
+            "   csub    %2,%0,%0        ,cc4,#1 \n"     \
+            : "=&r"(bit)                                \
+            : "r"(x), "r"(32)                           \
+            : "icc0", "cc4"                             \
+            );                                          \
+                                                        \
+        bit;                                            \
+})
+
+/**
+ * fls64 - find last bit set in a 64-bit value
+ * @n: the value to search
+ *
+ * This is defined the same way as ffs:
+ * - return 64..1 to indicate bit 63..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls64(u64 n)
+{
+        union {
+                u64 ll;
+                struct { u32 h, l; };
+        } _;
+        int bit, x, y;
+
+        _.ll = n;
+
+        asm("   subcc.p         %3,gr0,gr0,icc0         \n"
+            "   subcc           %4,gr0,gr0,icc1         \n"
+            "   ckne            icc0,cc4                \n"
+            "   ckne            icc1,cc5                \n"
+            "   norcr           cc4,cc5,cc6             \n"
+            "   csub.p          %0,%0,%0        ,cc6,1  \n"
+            "   orcr            cc5,cc4,cc4             \n"
+            "   andcr           cc4,cc5,cc4             \n"
+            "   cscan.p         %3,gr0,%0       ,cc4,0  \n"
+            "   setlos          #64,%1                  \n"
+            "   cscan.p         %4,gr0,%0       ,cc4,1  \n"
+            "   setlos          #32,%2                  \n"
+            "   csub.p          %1,%0,%0        ,cc4,0  \n"
+            "   csub            %2,%0,%0        ,cc4,1  \n"
+            : "=&r"(bit), "=r"(x), "=r"(y)
+            : "0r"(_.h), "r"(_.l)
+            : "icc0", "icc1", "cc4", "cc5", "cc6"
+            );
+        return bit;
+
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+        /* Note: (x & -x) gives us a mask that is the least significant
+         * (rightmost) 1-bit of the value in x.
+         */
+        return fls(x & -x);
+}
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+int __ffs(unsigned long x)
+{
+        int bit;
+        asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x));
+        return 31 - bit;
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+        unsigned long bit;
+        asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word));
+        return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U32
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+        int bit;
+        asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n));
+        return 31 - bit;
+}
+
+/*
+ * special slimline version of fls64() for calculating ilog2_u64()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U64
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+        union {
+                u64 ll;
+                struct { u32 h, l; };
+        } _;
+        int bit, x, y;
+
+        _.ll = n;
+
+        asm("   subcc           %3,gr0,gr0,icc0         \n"
+            "   ckeq            icc0,cc4                \n"
+            "   cscan.p         %3,gr0,%0       ,cc4,0  \n"
+            "   setlos          #63,%1                  \n"
+            "   cscan.p         %4,gr0,%0       ,cc4,1  \n"
+            "   setlos          #31,%2                  \n"
+            "   csub.p          %1,%0,%0        ,cc4,0  \n"
+            "   csub            %2,%0,%0        ,cc4,1  \n"
+            : "=&r"(bit), "=r"(x), "=r"(y)
+            : "0r"(_.h), "r"(_.l)
+            : "icc0", "cc4"
+            );
+        return bit;
+}
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr)       test_and_set_bit  ((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock,nr,addr)     test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h
new file mode 100644
index 000000000000..6b1b44d71028
--- /dev/null
+++ b/arch/frv/include/asm/bug.h
@@ -0,0 +1,53 @@
+/* bug.h: FRV bug trapping
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+#include <linux/linkage.h>
+
+#ifdef CONFIG_BUG
+/*
+ * Tell the user there is some problem.
+ */
+extern asmlinkage void __debug_bug_trap(int signr);
+
+#ifdef CONFIG_NO_KERNEL_MSG
+#define _debug_bug_printk()
+#else
+extern void __debug_bug_printk(const char *file, unsigned line);
+#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__)
+#endif
+
+#define _debug_bug_trap(signr)                  \
+do {                                            \
+        __debug_bug_trap(signr);                \
+        asm volatile("nop");                    \
+} while(0)
+
+#define HAVE_ARCH_BUG
+#define BUG()                                   \
+do {                                            \
+        _debug_bug_printk();                    \
+        _debug_bug_trap(6 /*SIGABRT*/);         \
+} while (0)
+
+#ifdef CONFIG_GDBSTUB
+#define HAVE_ARCH_KGDB_RAISE
+#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0)
+
+#define HAVE_ARCH_KGDB_BAD_PAGE
+#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
+#endif
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/frv/include/asm/bugs.h b/arch/frv/include/asm/bugs.h
new file mode 100644
index 000000000000..f2382be2b46c
--- /dev/null
+++ b/arch/frv/include/asm/bugs.h
@@ -0,0 +1,14 @@
+/* bugs.h: arch bug checking entry
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void check_bugs(void)
+{
+}
diff --git a/arch/frv/include/asm/busctl-regs.h b/arch/frv/include/asm/busctl-regs.h
new file mode 100644
index 000000000000..bb0ff4816e27
--- /dev/null
+++ b/arch/frv/include/asm/busctl-regs.h
@@ -0,0 +1,41 @@
+/* busctl-regs.h: FR400-series CPU bus controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+/* bus controller registers */
+#define __get_LGCR()    ({ *(volatile unsigned long *)(0xfe000010); })
+#define __get_LMAICR()  ({ *(volatile unsigned long *)(0xfe000030); })
+#define __get_LEMBR()   ({ *(volatile unsigned long *)(0xfe000040); })
+#define __get_LEMAM()   ({ *(volatile unsigned long *)(0xfe000048); })
+#define __get_LCR(R)    ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); })
+#define __get_LSBR(R)   ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); })
+#define __get_LSAM(R)   ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); })
+
+#define __set_LGCR(V)   do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0)
+#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0)
+#define __set_LEMBR(V)  do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0)
+#define __set_LEMAM(V)  do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0)
+#define __set_LCR(R,V)  do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0)
+#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0)
+#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0)
+
+/* FR401 SDRAM controller registers */
+#define __get_DBR(R)    ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); })
+#define __get_DAM(R)    ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); })
+
+/* FR551 SDRAM controller registers */
+#define __get_DARS(R)   ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); })
+#define __get_DAMK(R)   ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); })
+
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/arch/frv/include/asm/byteorder.h b/arch/frv/include/asm/byteorder.h
new file mode 100644
index 000000000000..f29b7593e088
--- /dev/null
+++ b/arch/frv/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h
new file mode 100644
index 000000000000..2797163b8f4f
--- /dev/null
+++ b/arch/frv/include/asm/cache.h
@@ -0,0 +1,23 @@
+/* cache.h: FRV cache definitions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT          (CONFIG_FRV_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned     __attribute__((aligned(L1_CACHE_BYTES)))
+#define ____cacheline_aligned   __attribute__((aligned(L1_CACHE_BYTES)))
+
+#endif
diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h
new file mode 100644
index 000000000000..432a69e7f3d4
--- /dev/null
+++ b/arch/frv/include/asm/cacheflush.h
@@ -0,0 +1,104 @@
+/* cacheflush.h: FRV cache flushing routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache management (our cache is physically indexed)
+ */
+#define flush_cache_all()                       do {} while(0)
+#define flush_cache_mm(mm)                      do {} while(0)
+#define flush_cache_dup_mm(mm)                  do {} while(0)
+#define flush_cache_range(mm, start, end)       do {} while(0)
+#define flush_cache_page(vma, vmaddr, pfn)      do {} while(0)
+#define flush_cache_vmap(start, end)            do {} while(0)
+#define flush_cache_vunmap(start, end)          do {} while(0)
+#define flush_dcache_mmap_lock(mapping)         do {} while(0)
+#define flush_dcache_mmap_unlock(mapping)       do {} while(0)
+
+/*
+ * physically-indexed cache management
+ * - see arch/frv/lib/cache.S
+ */
+extern void frv_dcache_writeback(unsigned long start, unsigned long size);
+extern void frv_cache_invalidate(unsigned long start, unsigned long size);
+extern void frv_icache_invalidate(unsigned long start, unsigned long size);
+extern void frv_cache_wback_inv(unsigned long start, unsigned long size);
+
+static inline void __flush_cache_all(void)
+{
+        asm volatile("  dcef    @(gr0,gr0),#1   \n"
+                     "  icei    @(gr0,gr0),#1   \n"
+                     "  membar                  \n"
+                     : : : "memory"
+                     );
+}
+
+/* dcache/icache coherency... */
+#ifdef CONFIG_MMU
+extern void flush_dcache_page(struct page *page);
+#else
+static inline void flush_dcache_page(struct page *page)
+{
+        unsigned long addr = page_to_phys(page);
+        frv_dcache_writeback(addr, addr + PAGE_SIZE);
+}
+#endif
+
+static inline void flush_page_to_ram(struct page *page)
+{
+        flush_dcache_page(page);
+}
+
+static inline void flush_icache(void)
+{
+        __flush_cache_all();
+}
+
+static inline void flush_icache_range(unsigned long start, unsigned long end)
+{
+        frv_cache_wback_inv(start, end);
+}
+
+#ifdef CONFIG_MMU
+extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+                                    unsigned long start, unsigned long len);
+#else
+static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+                                           unsigned long start, unsigned long len)
+{
+        frv_cache_wback_inv(start, start + len);
+}
+#endif
+
+static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+        flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE);
+}
+
+/*
+ * permit ptrace to access another process's address space through the icache
+ * and the dcache
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)      \
+do {                                                            \
+        memcpy((dst), (src), (len));                            \
+        flush_icache_user_range((vma), (page), (vaddr), (len)); \
+} while(0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)    \
+        memcpy((dst), (src), (len))
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/frv/include/asm/checksum.h b/arch/frv/include/asm/checksum.h
new file mode 100644
index 000000000000..269da09ff637
--- /dev/null
+++ b/arch/frv/include/asm/checksum.h
@@ -0,0 +1,180 @@
+/* checksum.h: FRV checksumming
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+                                                int len, __wsum sum, int *csum_err);
+
+/*
+ *      This is a version of ip_compute_csum() optimized for IP headers,
+ *      which always checksum on 4 octet boundaries.
+ *
+ */
+static inline
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+        unsigned int tmp, inc, sum = 0;
+
+        asm("   addcc           gr0,gr0,gr0,icc0\n" /* clear icc0.C */
+            "   subi            %1,#4,%1        \n"
+            "0:                                 \n"
+            "   ldu.p           @(%1,%3),%4     \n"
+            "   subicc          %2,#1,%2,icc1   \n"
+            "   addxcc.p        %4,%0,%0,icc0   \n"
+            "   bhi             icc1,#2,0b      \n"
+
+            /* fold the 33-bit result into 16-bits */
+            "   addxcc          gr0,%0,%0,icc0  \n"
+            "   srli            %0,#16,%1       \n"
+            "   sethi           #0,%0           \n"
+            "   add             %1,%0,%0        \n"
+            "   srli            %0,#16,%1       \n"
+            "   add             %1,%0,%0        \n"
+
+            : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
+            : "0" (sum), "1" (iph), "2" (ihl), "3" (4),
+            "m"(*(volatile struct { int _[100]; } *)iph)
+            : "icc0", "icc1", "memory"
+            );
+
+        return (__force __sum16)~sum;
+}
+
+/*
+ *      Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+        unsigned int tmp;
+
+        asm("   srli            %0,#16,%1       \n"
+            "   sethi           #0,%0           \n"
+            "   add             %1,%0,%0        \n"
+            "   srli            %0,#16,%1       \n"
+            "   add             %1,%0,%0        \n"
+            : "=r"(sum), "=&r"(tmp)
+            : "0"(sum)
+            );
+
+        return (__force __sum16)~sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        asm("   addcc           %1,%0,%0,icc0   \n"
+            "   addxcc          %2,%0,%0,icc0   \n"
+            "   addxcc          %3,%0,%0,icc0   \n"
+            "   addxcc          gr0,%0,%0,icc0  \n"
+            : "=r" (sum)
+            : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum)
+            : "icc0"
+            );
+        return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+                __u32 len, unsigned short proto, __wsum sum)
+{
+        unsigned long tmp, tmp2;
+
+        asm("   addcc           %2,%0,%0,icc0   \n"
+
+            /* add up the source addr */
+            "   ldi             @(%3,0),%1      \n"
+            "   addxcc          %1,%0,%0,icc0   \n"
+            "   ldi             @(%3,4),%2      \n"
+            "   addxcc          %2,%0,%0,icc0   \n"
+            "   ldi             @(%3,8),%1      \n"
+            "   addxcc          %1,%0,%0,icc0   \n"
+            "   ldi             @(%3,12),%2     \n"
+            "   addxcc          %2,%0,%0,icc0   \n"
+
+            /* add up the dest addr */
+            "   ldi             @(%4,0),%1      \n"
+            "   addxcc          %1,%0,%0,icc0   \n"
+            "   ldi             @(%4,4),%2      \n"
+            "   addxcc          %2,%0,%0,icc0   \n"
+            "   ldi             @(%4,8),%1      \n"
+            "   addxcc          %1,%0,%0,icc0   \n"
+            "   ldi             @(%4,12),%2     \n"
+            "   addxcc          %2,%0,%0,icc0   \n"
+
+            /* fold the 33-bit result into 16-bits */
+            "   addxcc          gr0,%0,%0,icc0  \n"
+            "   srli            %0,#16,%1       \n"
+            "   sethi           #0,%0           \n"
+            "   add             %1,%0,%0        \n"
+            "   srli            %0,#16,%1       \n"
+            "   add             %1,%0,%0        \n"
+
+            : "=r" (sum), "=&r" (tmp), "=r" (tmp2)
+            : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto)
+            : "icc0"
+            );
+
+        return (__force __sum16)~sum;
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/frv/include/asm/cpu-irqs.h b/arch/frv/include/asm/cpu-irqs.h
new file mode 100644
index 000000000000..478f3498fcfe
--- /dev/null
+++ b/arch/frv/include/asm/cpu-irqs.h
@@ -0,0 +1,81 @@
+/* cpu-irqs.h: on-CPU peripheral irqs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CPU_IRQS_H
+#define _ASM_CPU_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+/* IRQ to level mappings */
+#define IRQ_GDBSTUB_LEVEL       15
+#define IRQ_UART_LEVEL          13
+
+#ifdef CONFIG_GDBSTUB_UART0
+#define IRQ_UART0_LEVEL         IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART0_LEVEL         IRQ_UART_LEVEL
+#endif
+
+#ifdef CONFIG_GDBSTUB_UART1
+#define IRQ_UART1_LEVEL         IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART1_LEVEL         IRQ_UART_LEVEL
+#endif
+
+#define IRQ_DMA0_LEVEL          14
+#define IRQ_DMA1_LEVEL          14
+#define IRQ_DMA2_LEVEL          14
+#define IRQ_DMA3_LEVEL          14
+#define IRQ_DMA4_LEVEL          14
+#define IRQ_DMA5_LEVEL          14
+#define IRQ_DMA6_LEVEL          14
+#define IRQ_DMA7_LEVEL          14
+
+#define IRQ_TIMER0_LEVEL        12
+#define IRQ_TIMER1_LEVEL        11
+#define IRQ_TIMER2_LEVEL        10
+
+#define IRQ_XIRQ0_LEVEL         1
+#define IRQ_XIRQ1_LEVEL         2
+#define IRQ_XIRQ2_LEVEL         3
+#define IRQ_XIRQ3_LEVEL         4
+#define IRQ_XIRQ4_LEVEL         5
+#define IRQ_XIRQ5_LEVEL         6
+#define IRQ_XIRQ6_LEVEL         7
+#define IRQ_XIRQ7_LEVEL         8
+
+/* IRQ IDs presented to drivers */
+#define IRQ_CPU__UNUSED         IRQ_BASE_CPU
+#define IRQ_CPU_UART0           (IRQ_BASE_CPU + IRQ_UART0_LEVEL)
+#define IRQ_CPU_UART1           (IRQ_BASE_CPU + IRQ_UART1_LEVEL)
+#define IRQ_CPU_TIMER0          (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL)
+#define IRQ_CPU_TIMER1          (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL)
+#define IRQ_CPU_TIMER2          (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL)
+#define IRQ_CPU_DMA0            (IRQ_BASE_CPU + IRQ_DMA0_LEVEL)
+#define IRQ_CPU_DMA1            (IRQ_BASE_CPU + IRQ_DMA1_LEVEL)
+#define IRQ_CPU_DMA2            (IRQ_BASE_CPU + IRQ_DMA2_LEVEL)
+#define IRQ_CPU_DMA3            (IRQ_BASE_CPU + IRQ_DMA3_LEVEL)
+#define IRQ_CPU_DMA4            (IRQ_BASE_CPU + IRQ_DMA4_LEVEL)
+#define IRQ_CPU_DMA5            (IRQ_BASE_CPU + IRQ_DMA5_LEVEL)
+#define IRQ_CPU_DMA6            (IRQ_BASE_CPU + IRQ_DMA6_LEVEL)
+#define IRQ_CPU_DMA7            (IRQ_BASE_CPU + IRQ_DMA7_LEVEL)
+#define IRQ_CPU_EXTERNAL0       (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL)
+#define IRQ_CPU_EXTERNAL1       (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL)
+#define IRQ_CPU_EXTERNAL2       (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL)
+#define IRQ_CPU_EXTERNAL3       (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL)
+#define IRQ_CPU_EXTERNAL4       (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL)
+#define IRQ_CPU_EXTERNAL5       (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL)
+#define IRQ_CPU_EXTERNAL6       (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL)
+#define IRQ_CPU_EXTERNAL7       (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_CPU_IRQS_H */
diff --git a/arch/frv/include/asm/cpumask.h b/arch/frv/include/asm/cpumask.h
new file mode 100644
index 000000000000..d999c20c84d2
--- /dev/null
+++ b/arch/frv/include/asm/cpumask.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CPUMASK_H
+#define _ASM_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* _ASM_CPUMASK_H */
diff --git a/arch/frv/include/asm/cputime.h b/arch/frv/include/asm/cputime.h
new file mode 100644
index 000000000000..f6c373ad2b80
--- /dev/null
+++ b/arch/frv/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_CPUTIME_H
+#define _ASM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_CPUTIME_H */
diff --git a/arch/frv/include/asm/current.h b/arch/frv/include/asm/current.h
new file mode 100644
index 000000000000..86b027491b08
--- /dev/null
+++ b/arch/frv/include/asm/current.h
@@ -0,0 +1,30 @@
+/* current.h: FRV current task pointer
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * dedicate GR29 to keeping the current task pointer
+ */
+register struct task_struct *current asm("gr29");
+
+#define get_current() current
+
+#else
+
+#define CURRENT gr29
+
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/frv/include/asm/delay.h b/arch/frv/include/asm/delay.h
new file mode 100644
index 000000000000..597b4ebf03b4
--- /dev/null
+++ b/arch/frv/include/asm/delay.h
@@ -0,0 +1,50 @@
+/* delay.h: FRV delay code
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <asm/param.h>
+#include <asm/timer-regs.h>
+
+/*
+ * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop]
+ */
+extern unsigned long __delay_loops_MHz;
+
+static inline void __delay(unsigned long loops)
+{
+        asm volatile("1:        subicc  %0,#1,%0,icc0   \n"
+                     "          bnc     icc0,#2,1b      \n"
+                     : "=r" (loops)
+                     : "0" (loops)
+                     : "icc0"
+                     );
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void udelay(unsigned long usecs)
+{
+        __delay(usecs * __delay_loops_MHz);
+}
+
+#define ndelay(n)       udelay((n) * 5)
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/frv/include/asm/device.h b/arch/frv/include/asm/device.h
new file mode 100644
index 000000000000..d8f9872b0e2d
--- /dev/null
+++ b/arch/frv/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/frv/include/asm/div64.h b/arch/frv/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/frv/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/frv/include/asm/dm9000.h b/arch/frv/include/asm/dm9000.h
new file mode 100644
index 000000000000..f6f48fd9ec6e
--- /dev/null
+++ b/arch/frv/include/asm/dm9000.h
@@ -0,0 +1,37 @@
+/* dm9000.h: Davicom DM9000 adapter configuration
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DM9000_H
+#define _ASM_DM9000_H
+
+#include <asm/mb-regs.h>
+
+#define DM9000_ARCH_IOBASE      (__region_CS6 + 0x300)
+#define DM9000_ARCH_IRQ         IRQ_CPU_EXTERNAL3       /* XIRQ #3 (shared with FPGA) */
+#undef DM9000_ARCH_IRQ_ACTLOW                           /* IRQ pin active high */
+#define DM9000_ARCH_BUS_INFO    "CS6#+0x300"            /* bus info for ethtool */
+
+#undef __is_PCI_IO
+#define __is_PCI_IO(addr)       0       /* not PCI */
+
+#undef inl
+#define inl(addr)                                                                               \
+({                                                                                              \
+        unsigned long __ioaddr = (unsigned long) addr;                                          \
+        uint32_t x = readl(__ioaddr);                                                           \
+        ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff);    \
+})
+
+#undef insl
+#define insl(a,b,l)     __insl(a,b,l,0) /* don't byte-swap */
+
+
+#endif /* _ASM_DM9000_H */
diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..b2898877c07b
--- /dev/null
+++ b/arch/frv/include/asm/dma-mapping.h
@@ -0,0 +1,174 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/device.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern unsigned long __nongprelbss dma_coherent_mem_start;
+extern unsigned long __nongprelbss dma_coherent_mem_end;
+
+void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+                                 enum dma_data_direction direction);
+
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+                      enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+                      enum dma_data_direction direction);
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+             enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+
+extern
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+                        size_t size, enum dma_data_direction direction);
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+                    enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+
+
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+                             enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+                                enum dma_data_direction direction)
+{
+        flush_write_buffers();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                                   unsigned long offset, size_t size,
+                                   enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+                                      unsigned long offset, size_t size,
+                                      enum dma_data_direction direction)
+{
+        flush_write_buffers();
+}
+
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+                         enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+                            enum dma_data_direction direction)
+{
+        flush_write_buffers();
+}
+
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+        return 0;
+}
+
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+
+        return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+        if (!dev->dma_mask || !dma_supported(dev, mask))
+                return -EIO;
+
+        *dev->dma_mask = mask;
+
+        return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+        return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d, h) (1)
+
+static inline
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+                    enum dma_data_direction direction)
+{
+        flush_write_buffers();
+}
+
+#endif  /* _ASM_DMA_MAPPING_H */
diff --git a/arch/frv/include/asm/dma.h b/arch/frv/include/asm/dma.h
new file mode 100644
index 000000000000..683c47d48a5b
--- /dev/null
+++ b/arch/frv/include/asm/dma.h
@@ -0,0 +1,125 @@
+/* dma.h: FRV DMA controller management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+//#define DMA_DEBUG 1
+
+#include <linux/interrupt.h>
+
+#undef MAX_DMA_CHANNELS         /* don't use kernel/dma.c */
+
+/* under 2.4 this is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS         PAGE_OFFSET
+
+/*
+ * FRV DMA controller management
+ */
+typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data);
+
+extern void frv_dma_init(void);
+
+extern int frv_dma_open(const char *devname,
+                        unsigned long dmamask,
+                        int dmacap,
+                        dma_irq_handler_t handler,
+                        unsigned long irq_flags,
+                        void *data);
+
+/* channels required */
+#define FRV_DMA_MASK_ANY        ULONG_MAX       /* any channel */
+
+/* capabilities required */
+#define FRV_DMA_CAP_DREQ        0x01            /* DMA request pin */
+#define FRV_DMA_CAP_DACK        0x02            /* DMA ACK pin */
+#define FRV_DMA_CAP_DONE        0x04            /* DMA done pin */
+
+extern void frv_dma_close(int dma);
+
+extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr);
+
+extern void frv_dma_start(int dma,
+                          unsigned long sba, unsigned long dba,
+                          unsigned long pix, unsigned long six, unsigned long bcl);
+
+extern void frv_dma_restart_circular(int dma, unsigned long six);
+
+extern void frv_dma_stop(int dma);
+
+extern int is_frv_dma_interrupting(int dma);
+
+extern void frv_dma_dump(int dma);
+
+extern void frv_dma_status_clear(int dma);
+
+#define FRV_DMA_NCHANS  8
+#define FRV_DMA_4CHANS  4
+#define FRV_DMA_8CHANS  8
+
+#define DMAC_CCFRx              0x00    /* channel configuration reg */
+#define DMAC_CCFRx_CM_SHIFT     16
+#define DMAC_CCFRx_CM_DA        0x00000000
+#define DMAC_CCFRx_CM_SCA       0x00010000
+#define DMAC_CCFRx_CM_DCA       0x00020000
+#define DMAC_CCFRx_CM_2D        0x00030000
+#define DMAC_CCFRx_ATS_SHIFT    8
+#define DMAC_CCFRx_RS_INTERN    0x00000000
+#define DMAC_CCFRx_RS_EXTERN    0x00000001
+#define DMAC_CCFRx_RS_SHIFT     0
+
+#define DMAC_CSTRx              0x08    /* channel status reg */
+#define DMAC_CSTRx_FS           0x0000003f
+#define DMAC_CSTRx_NE           0x00000100
+#define DMAC_CSTRx_FED          0x00000200
+#define DMAC_CSTRx_WER          0x00000800
+#define DMAC_CSTRx_RER          0x00001000
+#define DMAC_CSTRx_CE           0x00002000
+#define DMAC_CSTRx_INT          0x00800000
+#define DMAC_CSTRx_BUSY         0x80000000
+
+#define DMAC_CCTRx              0x10    /* channel control reg */
+#define DMAC_CCTRx_DSIZ_1       0x00000000
+#define DMAC_CCTRx_DSIZ_2       0x00000001
+#define DMAC_CCTRx_DSIZ_4       0x00000002
+#define DMAC_CCTRx_DSIZ_32      0x00000005
+#define DMAC_CCTRx_DAU_HOLD     0x00000000
+#define DMAC_CCTRx_DAU_INC      0x00000010
+#define DMAC_CCTRx_DAU_DEC      0x00000020
+#define DMAC_CCTRx_SSIZ_1       0x00000000
+#define DMAC_CCTRx_SSIZ_2       0x00000100
+#define DMAC_CCTRx_SSIZ_4       0x00000200
+#define DMAC_CCTRx_SSIZ_32      0x00000500
+#define DMAC_CCTRx_SAU_HOLD     0x00000000
+#define DMAC_CCTRx_SAU_INC      0x00001000
+#define DMAC_CCTRx_SAU_DEC      0x00002000
+#define DMAC_CCTRx_FC           0x08000000
+#define DMAC_CCTRx_ICE          0x10000000
+#define DMAC_CCTRx_IE           0x40000000
+#define DMAC_CCTRx_ACT          0x80000000
+
+#define DMAC_SBAx               0x18    /* source base address reg */
+#define DMAC_DBAx               0x20    /* data base address reg */
+#define DMAC_PIXx               0x28    /* primary index reg */
+#define DMAC_SIXx               0x30    /* secondary index reg */
+#define DMAC_BCLx               0x38    /* byte count limit reg */
+#define DMAC_APRx               0x40    /* alternate pointer reg */
+
+/*
+ * required for PCI + MODULES
+ */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h
new file mode 100644
index 000000000000..7279ec07d62e
--- /dev/null
+++ b/arch/frv/include/asm/elf.h
@@ -0,0 +1,142 @@
+/* elf.h: FR-V ELF definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68knommu/elf.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+struct elf32_hdr;
+
+/*
+ * ELF header e_flags defines.
+ */
+#define EF_FRV_GPR_MASK         0x00000003 /* mask for # of gprs */
+#define EF_FRV_GPR32            0x00000001 /* Only uses GR on 32-register */
+#define EF_FRV_GPR64            0x00000002 /* Only uses GR on 64-register */
+#define EF_FRV_FPR_MASK         0x0000000c /* mask for # of fprs */
+#define EF_FRV_FPR32            0x00000004 /* Only uses FR on 32-register */
+#define EF_FRV_FPR64            0x00000008 /* Only uses FR on 64-register */
+#define EF_FRV_FPR_NONE         0x0000000C /* Uses software floating-point */
+#define EF_FRV_DWORD_MASK       0x00000030 /* mask for dword support */
+#define EF_FRV_DWORD_YES        0x00000010 /* Assumes stack aligned to 8-byte boundaries. */
+#define EF_FRV_DWORD_NO         0x00000020 /* Assumes stack aligned to 4-byte boundaries. */
+#define EF_FRV_DOUBLE           0x00000040 /* Uses double instructions. */
+#define EF_FRV_MEDIA            0x00000080 /* Uses media instructions. */
+#define EF_FRV_PIC              0x00000100 /* Uses position independent code. */
+#define EF_FRV_NON_PIC_RELOCS   0x00000200 /* Does not use position Independent code. */
+#define EF_FRV_MULADD           0x00000400 /* -mmuladd */
+#define EF_FRV_BIGPIC           0x00000800 /* -fPIC */
+#define EF_FRV_LIBPIC           0x00001000 /* -mlibrary-pic */
+#define EF_FRV_G0               0x00002000 /* -G 0, no small data ptr */
+#define EF_FRV_NOPACK           0x00004000 /* -mnopack */
+#define EF_FRV_FDPIC            0x00008000 /* -mfdpic */
+#define EF_FRV_CPU_MASK         0xff000000 /* specific cpu bits */
+#define EF_FRV_CPU_GENERIC      0x00000000 /* Set CPU type is FR-V */
+#define EF_FRV_CPU_FR500        0x01000000 /* Set CPU type is FR500 */
+#define EF_FRV_CPU_FR300        0x02000000 /* Set CPU type is FR300 */
+#define EF_FRV_CPU_SIMPLE       0x03000000 /* SIMPLE */
+#define EF_FRV_CPU_TOMCAT       0x04000000 /* Tomcat, FR500 prototype */
+#define EF_FRV_CPU_FR400        0x05000000 /* Set CPU type is FR400 */
+#define EF_FRV_CPU_FR550        0x06000000 /* Set CPU type is FR550 */
+#define EF_FRV_CPU_FR405        0x07000000 /* Set CPU type is FR405 */
+#define EF_FRV_CPU_FR450        0x08000000 /* Set CPU type is FR450 */
+
+/*
+ * FR-V ELF relocation types
+ */
+
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpmedia_regs elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+extern int elf_check_arch(const struct elf32_hdr *hdr);
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS))
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+#define ELF_DATA        ELFDATA2MSB
+#define ELF_ARCH        EM_FRV
+
+#define ELF_PLAT_INIT(_r)                       \
+do {                                            \
+        __kernel_frame0_ptr->gr16       = 0;    \
+        __kernel_frame0_ptr->gr17       = 0;    \
+        __kernel_frame0_ptr->gr18       = 0;    \
+        __kernel_frame0_ptr->gr19       = 0;    \
+        __kernel_frame0_ptr->gr20       = 0;    \
+        __kernel_frame0_ptr->gr21       = 0;    \
+        __kernel_frame0_ptr->gr22       = 0;    \
+        __kernel_frame0_ptr->gr23       = 0;    \
+        __kernel_frame0_ptr->gr24       = 0;    \
+        __kernel_frame0_ptr->gr25       = 0;    \
+        __kernel_frame0_ptr->gr26       = 0;    \
+        __kernel_frame0_ptr->gr27       = 0;    \
+        __kernel_frame0_ptr->gr29       = 0;    \
+} while(0)
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)     \
+do {                                                                                    \
+        __kernel_frame0_ptr->gr16       = _exec_map_addr;                               \
+        __kernel_frame0_ptr->gr17       = _interp_map_addr;                             \
+        __kernel_frame0_ptr->gr18       = _dynamic_addr;                                \
+        __kernel_frame0_ptr->gr19       = 0;                                            \
+        __kernel_frame0_ptr->gr20       = 0;                                            \
+        __kernel_frame0_ptr->gr21       = 0;                                            \
+        __kernel_frame0_ptr->gr22       = 0;                                            \
+        __kernel_frame0_ptr->gr23       = 0;                                            \
+        __kernel_frame0_ptr->gr24       = 0;                                            \
+        __kernel_frame0_ptr->gr25       = 0;                                            \
+        __kernel_frame0_ptr->gr26       = 0;                                            \
+        __kernel_frame0_ptr->gr27       = 0;                                            \
+        __kernel_frame0_ptr->gr29       = 0;                                            \
+} while(0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS   EF_FRV_FDPIC
+#define ELF_EXEC_PAGESIZE       16384
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0x08000000UL
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
diff --git a/arch/frv/include/asm/emergency-restart.h b/arch/frv/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/frv/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/frv/include/asm/errno.h b/arch/frv/include/asm/errno.h
new file mode 100644
index 000000000000..d010795ceefe
--- /dev/null
+++ b/arch/frv/include/asm/errno.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_ERRNO_H */
+
diff --git a/arch/frv/include/asm/fb.h b/arch/frv/include/asm/fb.h
new file mode 100644
index 000000000000..c7df38030992
--- /dev/null
+++ b/arch/frv/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+        return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/frv/include/asm/fcntl.h b/arch/frv/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/frv/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/frv/include/asm/fpu.h b/arch/frv/include/asm/fpu.h
new file mode 100644
index 000000000000..d73c60b56641
--- /dev/null
+++ b/arch/frv/include/asm/fpu.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_FPU_H
+#define __ASM_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0)
+
+#endif /* __ASM_FPU_H */
diff --git a/arch/frv/include/asm/ftrace.h b/arch/frv/include/asm/ftrace.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/frv/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/frv/include/asm/futex.h b/arch/frv/include/asm/futex.h
new file mode 100644
index 000000000000..08b3d1da3583
--- /dev/null
+++ b/arch/frv/include/asm/futex.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/uaccess.h>
+
+extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr);
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+        return -ENOSYS;
+}
+
+#endif
+#endif
diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h
new file mode 100644
index 000000000000..24f9738670bd
--- /dev/null
+++ b/arch/frv/include/asm/gdb-stub.h
@@ -0,0 +1,140 @@
+/* gdb-stub.h: FRV GDB stub
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_GDB_STUB_H
+#define __ASM_GDB_STUB_H
+
+#undef GDBSTUB_DEBUG_PROTOCOL
+
+#include <asm/ptrace.h>
+
+/*
+ * important register numbers in GDB protocol
+ * - GR0,  GR1,  GR2,  GR3,  GR4,  GR5,  GR6,  GR7,
+ * - GR8,  GR9,  GR10, GR11, GR12, GR13, GR14, GR15,
+ * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23,
+ * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31,
+ * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39,
+ * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47,
+ * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55,
+ * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63,
+ * - FR0,  FR1,  FR2,  FR3,  FR4,  FR5,  FR6,  FR7,
+ * - FR8,  FR9,  FR10, FR11, FR12, FR13, FR14, FR15,
+ * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23,
+ * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31,
+ * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39,
+ * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47,
+ * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55,
+ * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63,
+ * - PC, PSR, CCR, CCCR,
+ * - _X132, _X133, _X134
+ * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3,
+ * - SCR0, SCR1, SCR2, SCR3,
+ * - LR, LCR,
+ * - IACC0H, IACC0L,
+ * - FSR0,
+ * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7,
+ * - ACCG0123, ACCG4567,
+ * - MSR0, MSR1,
+ * - GNER0, GNER1,
+ * - FNER0, FNER1,
+ */
+#define GDB_REG_GR(N)   (N)
+#define GDB_REG_FR(N)   (64+(N))
+#define GDB_REG_PC      128
+#define GDB_REG_PSR     129
+#define GDB_REG_CCR     130
+#define GDB_REG_CCCR    131
+#define GDB_REG_TBR     135
+#define GDB_REG_BRR     136
+#define GDB_REG_DBAR(N) (137+(N))
+#define GDB_REG_SCR(N)  (141+(N))
+#define GDB_REG_LR      145
+#define GDB_REG_LCR     146
+#define GDB_REG_FSR0    149
+#define GDB_REG_ACC(N)  (150+(N))
+#define GDB_REG_ACCG(N) (158+(N)/4)
+#define GDB_REG_MSR(N)  (160+(N))
+#define GDB_REG_GNER(N) (162+(N))
+#define GDB_REG_FNER(N) (164+(N))
+
+#define GDB_REG_SP      GDB_REG_GR(1)
+#define GDB_REG_FP      GDB_REG_GR(2)
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern void gdbstub_init(void);
+extern void gdbstub(int type);
+extern void gdbstub_exit(int status);
+
+extern void gdbstub_io_init(void);
+extern void gdbstub_set_baud(unsigned baud);
+extern int gdbstub_rx_char(unsigned char *_ch, int nonblock);
+extern void gdbstub_tx_char(unsigned char ch);
+extern void gdbstub_tx_flush(void);
+extern void gdbstub_do_rx(void);
+
+extern asmlinkage void __debug_stub_init_break(void);
+extern asmlinkage void __break_hijack_kernel_event(void);
+extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
+extern asmlinkage void start_kernel(void);
+
+extern asmlinkage void gdbstub_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(void);
+extern asmlinkage void gdbstub_intercept(void);
+
+extern uint32_t __entry_usertrap_table[];
+extern uint32_t __entry_kerneltrap_table[];
+
+extern volatile u8      gdbstub_rx_buffer[PAGE_SIZE];
+extern volatile u32     gdbstub_rx_inp;
+extern volatile u32     gdbstub_rx_outp;
+extern volatile u8      gdbstub_rx_overflow;
+extern u8               gdbstub_rx_unget;
+
+extern void gdbstub_printk(const char *fmt, ...);
+extern void debug_to_serial(const char *p, int n);
+extern void console_set_baud(unsigned baud);
+
+#ifdef GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT,...) ({ 0; })
+#endif
+
+/*
+ * we dedicate GR31 to keeping a pointer to the gdbstub exception frame
+ * - gr31 is destroyed on entry to the gdbstub if !MMU
+ * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU
+ */
+register struct frv_frame0 *__debug_frame0 asm("gr31");
+
+#define __debug_frame           (&__debug_frame0->regs)
+#define __debug_user_context    (&__debug_frame0->uc)
+#define __debug_regs            (&__debug_frame0->debug)
+#define __debug_reg(X)          ((unsigned long *) ((unsigned long) &__debug_frame0 + (X)))
+
+struct frv_debug_status {
+        unsigned long           bpsr;
+        unsigned long           dcr;
+        unsigned long           brr;
+        unsigned long           nmar;
+};
+
+extern struct frv_debug_status __debug_status;
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* __ASM_GDB_STUB_H */
diff --git a/arch/frv/include/asm/gpio-regs.h b/arch/frv/include/asm/gpio-regs.h
new file mode 100644
index 000000000000..9edf5d5d4d3f
--- /dev/null
+++ b/arch/frv/include/asm/gpio-regs.h
@@ -0,0 +1,116 @@
+/* gpio-regs.h: on-chip general purpose I/O registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_GPIO_REGS
+#define _ASM_GPIO_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_PDR()     ({ __reg(0xfeff0400); })
+#define __set_PDR(V)    do { __reg(0xfeff0400) = (V); mb(); } while(0)
+
+#define __get_GPDR()    ({ __reg(0xfeff0408); })
+#define __set_GPDR(V)   do { __reg(0xfeff0408) = (V); mb(); } while(0)
+
+#define __get_SIR()     ({ __reg(0xfeff0410); })
+#define __set_SIR(V)    do { __reg(0xfeff0410) = (V); mb(); } while(0)
+
+#define __get_SOR()     ({ __reg(0xfeff0418); })
+#define __set_SOR(V)    do { __reg(0xfeff0418) = (V); mb(); } while(0)
+
+#define __set_PDSR(V)   do { __reg(0xfeff0420) = (V); mb(); } while(0)
+
+#define __set_PDCR(V)   do { __reg(0xfeff0428) = (V); mb(); } while(0)
+
+#define __get_RSTR()    ({ __reg(0xfeff0500); })
+#define __set_RSTR(V)   do { __reg(0xfeff0500) = (V); mb(); } while(0)
+
+
+
+/* PDR definitions */
+#define PDR_GPIO_DATA(X)        (1 << (X))
+
+/* GPDR definitions */
+#define GPDR_INPUT              0
+#define GPDR_OUTPUT             1
+#define GPDR_DREQ0_BIT          0x00001000
+#define GPDR_DREQ1_BIT          0x00008000
+#define GPDR_DREQ2_BIT          0x00040000
+#define GPDR_DREQ3_BIT          0x00080000
+#define GPDR_DREQ4_BIT          0x00004000
+#define GPDR_DREQ5_BIT          0x00020000
+#define GPDR_DREQ6_BIT          0x00100000
+#define GPDR_DREQ7_BIT          0x00200000
+#define GPDR_DACK0_BIT          0x00002000
+#define GPDR_DACK1_BIT          0x00010000
+#define GPDR_DACK2_BIT          0x00100000
+#define GPDR_DACK3_BIT          0x00200000
+#define GPDR_DONE0_BIT          0x00004000
+#define GPDR_DONE1_BIT          0x00020000
+#define GPDR_GPIO_DIR(X,D)      ((D) << (X))
+
+/* SIR definitions */
+#define SIR_GPIO_INPUT          0
+#define SIR_DREQ7_INPUT         0x00200000
+#define SIR_DREQ6_INPUT         0x00100000
+#define SIR_DREQ3_INPUT         0x00080000
+#define SIR_DREQ2_INPUT         0x00040000
+#define SIR_DREQ5_INPUT         0x00020000
+#define SIR_DREQ1_INPUT         0x00008000
+#define SIR_DREQ4_INPUT         0x00004000
+#define SIR_DREQ0_INPUT         0x00001000
+#define SIR_RXD1_INPUT          0x00000400
+#define SIR_CTS0_INPUT          0x00000100
+#define SIR_RXD0_INPUT          0x00000040
+#define SIR_GATE1_INPUT         0x00000020
+#define SIR_GATE0_INPUT         0x00000010
+#define SIR_IRQ3_INPUT          0x00000008
+#define SIR_IRQ2_INPUT          0x00000004
+#define SIR_IRQ1_INPUT          0x00000002
+#define SIR_IRQ0_INPUT          0x00000001
+#define SIR_DREQ_BITS           (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \
+                                 SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \
+                                 SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \
+                                 SIR_DREQ6_INPUT | SIR_DREQ7_INPUT)
+
+/* SOR definitions */
+#define SOR_GPIO_OUTPUT         0
+#define SOR_DACK3_OUTPUT        0x00200000
+#define SOR_DACK2_OUTPUT        0x00100000
+#define SOR_DONE1_OUTPUT        0x00020000
+#define SOR_DACK1_OUTPUT        0x00010000
+#define SOR_DONE0_OUTPUT        0x00004000
+#define SOR_DACK0_OUTPUT        0x00002000
+#define SOR_TXD1_OUTPUT         0x00000800
+#define SOR_RTS0_OUTPUT         0x00000200
+#define SOR_TXD0_OUTPUT         0x00000080
+#define SOR_TOUT1_OUTPUT        0x00000020
+#define SOR_TOUT0_OUTPUT        0x00000010
+#define SOR_DONE_BITS           (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT)
+#define SOR_DACK_BITS           (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \
+                                 SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT)
+
+/* PDSR definitions */
+#define PDSR_UNCHANGED          0
+#define PDSR_SET_BIT(X)         (1 << (X))
+
+/* PDCR definitions */
+#define PDCR_UNCHANGED          0
+#define PDCR_CLEAR_BIT(X)       (1 << (X))
+
+/* RSTR definitions */
+/* Read Only */
+#define RSTR_POWERON            0x00000400
+#define RSTR_SOFTRESET_STATUS   0x00000100
+/* Write Only */
+#define RSTR_SOFTRESET          0x00000001
+
+#endif /* _ASM_GPIO_REGS */
diff --git a/arch/frv/include/asm/hardirq.h b/arch/frv/include/asm/hardirq.h
new file mode 100644
index 000000000000..fc47515822a2
--- /dev/null
+++ b/arch/frv/include/asm/hardirq.h
@@ -0,0 +1,35 @@
+/* hardirq.h: FRV hardware IRQ management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+        unsigned int __softirq_pending;
+        unsigned long idle_timestamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
+
+#ifdef CONFIG_SMP
+#error SMP not available on FR-V
+#endif /* CONFIG_SMP */
+
+extern atomic_t irq_err_count;
+static inline void ack_bad_irq(int irq)
+{
+        atomic_inc(&irq_err_count);
+}
+
+#endif
diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h
new file mode 100644
index 000000000000..68e4677fb9e7
--- /dev/null
+++ b/arch/frv/include/asm/highmem.h
@@ -0,0 +1,182 @@
+/* highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * See Documentation/frv/mmu-layout.txt for more information.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <asm/mem-layout.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+
+#define NR_TLB_LINES            64      /* number of lines in the TLB */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define HIGHMEM_DEBUG 1
+#else
+#define HIGHMEM_DEBUG 0
+#endif
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+#define kmap_prot PAGE_KERNEL
+#define kmap_pte ______kmap_pte_in_TLB
+extern pte_t *pkmap_page_table;
+
+#define flush_cache_kmaps()  do { } while (0)
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP      PTRS_PER_PTE
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+
+extern struct page *kmap_atomic_to_page(void *ptr);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+#define KMAP_ATOMIC_CACHE_DAMR          8
+
+#ifndef __ASSEMBLY__
+
+#define __kmap_atomic_primary(type, paddr, ampr)                                                \
+({                                                                                              \
+        unsigned long damlr, dampr;                                                             \
+                                                                                                \
+        dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V;             \
+                                                                                                \
+        if (type != __KM_CACHE)                                                                 \
+                asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory");                   \
+        else                                                                                    \
+                asm volatile("movgs %0,iampr"#ampr"\n"                                          \
+                             "movgs %0,dampr"#ampr"\n"                                          \
+                             :: "r"(dampr) : "memory"                                           \
+                             );                                                                 \
+                                                                                                \
+        asm("movsg damlr"#ampr",%0" : "=r"(damlr));                                             \
+                                                                                                \
+        /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/            \
+                                                                                                \
+        (void *) damlr;                                                                         \
+})
+
+#define __kmap_atomic_secondary(slot, paddr)                                                      \
+({                                                                                                \
+        unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE;                   \
+        unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
+                                                                                                  \
+        asm volatile("movgs %0,tplr \n"                                                           \
+                     "movgs %1,tppr \n"                                                           \
+                     "tlbpr %0,gr0,#2,#1"                                                         \
+                     : : "r"(damlr), "r"(dampr) : "memory");                                      \
+                                                                                                  \
+        /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/                      \
+                                                                                                  \
+        (void *) damlr;                                                                           \
+})
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+        unsigned long paddr;
+
+        pagefault_disable();
+        debug_kmap_atomic(type);
+        paddr = page_to_phys(page);
+
+        switch (type) {
+        case 0:         return __kmap_atomic_primary(0, paddr, 2);
+        case 1:         return __kmap_atomic_primary(1, paddr, 3);
+        case 2:         return __kmap_atomic_primary(2, paddr, 4);
+        case 3:         return __kmap_atomic_primary(3, paddr, 5);
+        case 4:         return __kmap_atomic_primary(4, paddr, 6);
+        case 5:         return __kmap_atomic_primary(5, paddr, 7);
+        case 6:         return __kmap_atomic_primary(6, paddr, 8);
+        case 7:         return __kmap_atomic_primary(7, paddr, 9);
+        case 8:         return __kmap_atomic_primary(8, paddr, 10);
+
+        case 9 ... 9 + NR_TLB_LINES - 1:
+                return __kmap_atomic_secondary(type - 9, paddr);
+
+        default:
+                BUG();
+                return NULL;
+        }
+}
+
+#define __kunmap_atomic_primary(type, ampr)                             \
+do {                                                                    \
+        asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory");          \
+        if (type == __KM_CACHE)                                         \
+                asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory");  \
+} while(0)
+
+#define __kunmap_atomic_secondary(slot, vaddr)                          \
+do {                                                                    \
+        asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory");   \
+} while(0)
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+        switch (type) {
+        case 0:         __kunmap_atomic_primary(0, 2);  break;
+        case 1:         __kunmap_atomic_primary(1, 3);  break;
+        case 2:         __kunmap_atomic_primary(2, 4);  break;
+        case 3:         __kunmap_atomic_primary(3, 5);  break;
+        case 4:         __kunmap_atomic_primary(4, 6);  break;
+        case 5:         __kunmap_atomic_primary(5, 7);  break;
+        case 6:         __kunmap_atomic_primary(6, 8);  break;
+        case 7:         __kunmap_atomic_primary(7, 9);  break;
+        case 8:         __kunmap_atomic_primary(8, 10); break;
+
+        case 9 ... 9 + NR_TLB_LINES - 1:
+                __kunmap_atomic_secondary(type - 9, kvaddr);
+                break;
+
+        default:
+                BUG();
+        }
+        pagefault_enable();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/frv/include/asm/hw_irq.h b/arch/frv/include/asm/hw_irq.h
new file mode 100644
index 000000000000..522ad37923d8
--- /dev/null
+++ b/arch/frv/include/asm/hw_irq.h
@@ -0,0 +1,16 @@
+/* hw_irq.h: FR-V specific h/w IRQ stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h
new file mode 100644
index 000000000000..8b15838de216
--- /dev/null
+++ b/arch/frv/include/asm/init.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_INIT_H
+#define _ASM_INIT_H
+
+#define __init __attribute__ ((__section__ (".text.init")))
+#define __initdata __attribute__ ((__section__ (".data.init")))
+/* For assembly routines */
+#define __INIT          .section        ".text.init",#alloc,#execinstr
+#define __FINIT         .previous
+#define __INITDATA      .section        ".data.init",#alloc,#write
+
+#endif
+
diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h
new file mode 100644
index 000000000000..ca7475e73b5e
--- /dev/null
+++ b/arch/frv/include/asm/io.h
@@ -0,0 +1,392 @@
+/* io.h: FRV I/O operations
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This gets interesting when talking to the PCI bus - the CPU is in big endian
+ * mode, the PCI bus is little endian and the hardware in the middle can do
+ * byte swapping
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/virtconvert.h>
+#include <asm/string.h>
+#include <asm/mb-regs.h>
+#include <linux/delay.h>
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+
+static inline unsigned short _swapw(unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned long _swapl(unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+//#define __iormb() asm volatile("membar")
+//#define __iowmb() asm volatile("membar")
+
+#define __raw_readb __builtin_read8
+#define __raw_readw __builtin_read16
+#define __raw_readl __builtin_read32
+
+#define __raw_writeb(datum, addr) __builtin_write8(addr, datum)
+#define __raw_writew(datum, addr) __builtin_write16(addr, datum)
+#define __raw_writel(datum, addr) __builtin_write32(addr, datum)
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+        unsigned long __ioaddr = (unsigned long) addr;
+        const uint8_t *bp = buf;
+
+        while (len--)
+                __builtin_write8((volatile void __iomem *) __ioaddr, *bp++);
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+        unsigned long __ioaddr = (unsigned long) addr;
+        const uint16_t *bp = buf;
+
+        while (len--)
+                __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++));
+}
+
+extern void __outsl_ns(unsigned int addr, const void *buf, int len);
+extern void __outsl_sw(unsigned int addr, const void *buf, int len);
+static inline void __outsl(unsigned int addr, const void *buf, int len, int swap)
+{
+        unsigned long __ioaddr = (unsigned long) addr;
+
+        if (!swap)
+                __outsl_ns(__ioaddr, buf, len);
+        else
+                __outsl_sw(__ioaddr, buf, len);
+}
+
+static inline void io_insb(unsigned long addr, void *buf, int len)
+{
+        uint8_t *bp = buf;
+
+        while (len--)
+                *bp++ = __builtin_read8((volatile void __iomem *) addr);
+}
+
+static inline void io_insw(unsigned long addr, void *buf, int len)
+{
+        uint16_t *bp = buf;
+
+        while (len--)
+                *bp++ = __builtin_read16((volatile void __iomem *) addr);
+}
+
+extern void __insl_ns(unsigned long addr, void *buf, int len);
+extern void __insl_sw(unsigned long addr, void *buf, int len);
+static inline void __insl(unsigned long addr, void *buf, int len, int swap)
+{
+        if (!swap)
+                __insl_ns(addr, buf, len);
+        else
+                __insl_sw(addr, buf, len);
+}
+
+#define mmiowb() mb()
+
+/*
+ *      make the short names macros so specific devices
+ *      can override them as required
+ */
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+        memset((void __force *) addr, val, count);
+}
+
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+        memcpy(dst, (void __force *) src, count);
+}
+
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+        memcpy((void __force *) dst, src, count);
+}
+
+static inline uint8_t inb(unsigned long addr)
+{
+        return __builtin_read8((void __iomem *)addr);
+}
+
+static inline uint16_t inw(unsigned long addr)
+{
+        uint16_t ret = __builtin_read16((void __iomem *)addr);
+
+        if (__is_PCI_IO(addr))
+                ret = _swapw(ret);
+
+        return ret;
+}
+
+static inline uint32_t inl(unsigned long addr)
+{
+        uint32_t ret = __builtin_read32((void __iomem *)addr);
+
+        if (__is_PCI_IO(addr))
+                ret = _swapl(ret);
+
+        return ret;
+}
+
+static inline void outb(uint8_t datum, unsigned long addr)
+{
+        __builtin_write8((void __iomem *)addr, datum);
+}
+
+static inline void outw(uint16_t datum, unsigned long addr)
+{
+        if (__is_PCI_IO(addr))
+                datum = _swapw(datum);
+        __builtin_write16((void __iomem *)addr, datum);
+}
+
+static inline void outl(uint32_t datum, unsigned long addr)
+{
+        if (__is_PCI_IO(addr))
+                datum = _swapl(datum);
+        __builtin_write32((void __iomem *)addr, datum);
+}
+
+#define inb_p(addr)     inb(addr)
+#define inw_p(addr)     inw(addr)
+#define inl_p(addr)     inl(addr)
+#define outb_p(x,addr)  outb(x,addr)
+#define outw_p(x,addr)  outw(x,addr)
+#define outl_p(x,addr)  outl(x,addr)
+
+#define outsb(a,b,l)    io_outsb(a,b,l)
+#define outsw(a,b,l)    io_outsw(a,b,l)
+#define outsl(a,b,l)    __outsl(a,b,l,0)
+
+#define insb(a,b,l)     io_insb(a,b,l)
+#define insw(a,b,l)     io_insw(a,b,l)
+#define insl(a,b,l)     __insl(a,b,l,0)
+
+#define IO_SPACE_LIMIT  0xffffffff
+
+static inline uint8_t readb(const volatile void __iomem *addr)
+{
+        return __builtin_read8((__force void volatile __iomem *) addr);
+}
+
+static inline uint16_t readw(const volatile void __iomem *addr)
+{
+        uint16_t ret =  __builtin_read16((__force void volatile __iomem *)addr);
+
+        if (__is_PCI_MEM(addr))
+                ret = _swapw(ret);
+        return ret;
+}
+
+static inline uint32_t readl(const volatile void __iomem *addr)
+{
+        uint32_t ret =  __builtin_read32((__force void volatile __iomem *)addr);
+
+        if (__is_PCI_MEM(addr))
+                ret = _swapl(ret);
+
+        return ret;
+}
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(uint8_t datum, volatile void __iomem *addr)
+{
+        __builtin_write8(addr, datum);
+        if (__is_PCI_MEM(addr))
+                __flush_PCI_writes();
+}
+
+static inline void writew(uint16_t datum, volatile void __iomem *addr)
+{
+        if (__is_PCI_MEM(addr))
+                datum = _swapw(datum);
+
+        __builtin_write16(addr, datum);
+        if (__is_PCI_MEM(addr))
+                __flush_PCI_writes();
+}
+
+static inline void writel(uint32_t datum, volatile void __iomem *addr)
+{
+        if (__is_PCI_MEM(addr))
+                datum = _swapl(datum);
+
+        __builtin_write32(addr, datum);
+        if (__is_PCI_MEM(addr))
+                __flush_PCI_writes();
+}
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING              0
+#define IOMAP_NOCACHE_SER               1
+#define IOMAP_NOCACHE_NONSER            2
+#define IOMAP_WRITETHROUGH              3
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define ioremap_wc ioremap_nocache
+
+extern void iounmap(void volatile __iomem *addr);
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+        return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+static inline void flush_write_buffers(void)
+{
+        __asm__ __volatile__ ("membar" : : :"memory");
+}
+
+/*
+ * do appropriate I/O accesses for token type
+ */
+static inline unsigned int ioread8(void __iomem *p)
+{
+        return __builtin_read8(p);
+}
+
+static inline unsigned int ioread16(void __iomem *p)
+{
+        uint16_t ret = __builtin_read16(p);
+        if (__is_PCI_addr(p))
+                ret = _swapw(ret);
+        return ret;
+}
+
+static inline unsigned int ioread32(void __iomem *p)
+{
+        uint32_t ret = __builtin_read32(p);
+        if (__is_PCI_addr(p))
+                ret = _swapl(ret);
+        return ret;
+}
+
+static inline void iowrite8(u8 val, void __iomem *p)
+{
+        __builtin_write8(p, val);
+        if (__is_PCI_MEM(p))
+                __flush_PCI_writes();
+}
+
+static inline void iowrite16(u16 val, void __iomem *p)
+{
+        if (__is_PCI_addr(p))
+                val = _swapw(val);
+        __builtin_write16(p, val);
+        if (__is_PCI_MEM(p))
+                __flush_PCI_writes();
+}
+
+static inline void iowrite32(u32 val, void __iomem *p)
+{
+        if (__is_PCI_addr(p))
+                val = _swapl(val);
+        __builtin_write32(p, val);
+        if (__is_PCI_MEM(p))
+                __flush_PCI_writes();
+}
+
+static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count)
+{
+        io_insb((unsigned long) p, dst, count);
+}
+
+static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count)
+{
+        io_insw((unsigned long) p, dst, count);
+}
+
+static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count)
+{
+        __insl_ns((unsigned long) p, dst, count);
+}
+
+static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count)
+{
+        io_outsb((unsigned long) p, src, count);
+}
+
+static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count)
+{
+        io_outsw((unsigned long) p, src, count);
+}
+
+static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count)
+{
+        __outsl_ns((unsigned long) p, src, count);
+}
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/arch/frv/include/asm/ioctl.h b/arch/frv/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/frv/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h
new file mode 100644
index 000000000000..d0c30e31fbda
--- /dev/null
+++ b/arch/frv/include/asm/ioctls.h
@@ -0,0 +1,86 @@
+#ifndef __ASM_IOCTLS_H__
+#define __ASM_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS          0x5401
+#define TCSETS          0x5402
+#define TCSETSW         0x5403
+#define TCSETSF         0x5404
+#define TCGETA          0x5405
+#define TCSETA          0x5406
+#define TCSETAW         0x5407
+#define TCSETAF         0x5408
+#define TCSBRK          0x5409
+#define TCXONC          0x540A
+#define TCFLSH          0x540B
+#define TIOCEXCL        0x540C
+#define TIOCNXCL        0x540D
+#define TIOCSCTTY       0x540E
+#define TIOCGPGRP       0x540F
+#define TIOCSPGRP       0x5410
+#define TIOCOUTQ        0x5411
+#define TIOCSTI         0x5412
+#define TIOCGWINSZ      0x5413
+#define TIOCSWINSZ      0x5414
+#define TIOCMGET        0x5415
+#define TIOCMBIS        0x5416
+#define TIOCMBIC        0x5417
+#define TIOCMSET        0x5418
+#define TIOCGSOFTCAR    0x5419
+#define TIOCSSOFTCAR    0x541A
+#define FIONREAD        0x541B
+#define TIOCINQ         FIONREAD
+#define TIOCLINUX       0x541C
+#define TIOCCONS        0x541D
+#define TIOCGSERIAL     0x541E
+#define TIOCSSERIAL     0x541F
+#define TIOCPKT         0x5420
+#define FIONBIO         0x5421
+#define TIOCNOTTY       0x5422
+#define TIOCSETD        0x5423
+#define TIOCGETD        0x5424
+#define TCSBRKP         0x5425  /* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT  0x5426  /* For debugging only */
+#define TIOCSBRK        0x5427  /* BSD compatibility */
+#define TIOCCBRK        0x5428  /* BSD compatibility */
+#define TIOCGSID        0x5429  /* Return the session ID of FD */
+#define TCGETS2         _IOR('T',0x2A, struct termios2)
+#define TCSETS2         _IOW('T',0x2B, struct termios2)
+#define TCSETSW2        _IOW('T',0x2C, struct termios2)
+#define TCSETSF2        _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN        _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK      _IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX        0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX         0x5451
+#define FIOASYNC        0x5452
+#define TIOCSERCONFIG   0x5453
+#define TIOCSERGWILD    0x5454
+#define TIOCSERSWILD    0x5455
+#define TIOCGLCKTRMIOS  0x5456
+#define TIOCSLCKTRMIOS  0x5457
+#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT      0x545C  /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x545D  /* read serial port inline interrupt counts */
+#define FIOQSIZE        0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA             0
+#define TIOCPKT_FLUSHREAD        1
+#define TIOCPKT_FLUSHWRITE       2
+#define TIOCPKT_STOP             4
+#define TIOCPKT_START            8
+#define TIOCPKT_NOSTOP          16
+#define TIOCPKT_DOSTOP          32
+
+#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
+
+#endif /* __ASM_IOCTLS_H__ */
+
diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..b546f67e455f
--- /dev/null
+++ b/arch/frv/include/asm/ipcbuf.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_IPCBUF_H__
+#define __ASM_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+#endif /* __ASM_IPCBUF_H__ */
+
diff --git a/arch/frv/include/asm/irc-regs.h b/arch/frv/include/asm/irc-regs.h
new file mode 100644
index 000000000000..afa30aeacc82
--- /dev/null
+++ b/arch/frv/include/asm/irc-regs.h
@@ -0,0 +1,53 @@
+/* irc-regs.h: on-chip interrupt controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRC_REGS
+#define _ASM_IRC_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_TM0()     ({ __reg(0xfeff9800); })
+#define __get_TM1()     ({ __reg(0xfeff9808); })
+#define __set_TM1(V)    do { __reg(0xfeff9808) = (V); mb(); } while(0)
+
+#define __set_TM1x(XI,V)                        \
+do {                                            \
+        int shift = (XI) * 2 + 16;              \
+        unsigned long tm1 = __reg(0xfeff9808);  \
+        tm1 &= ~(0x3 << shift);                 \
+        tm1 |= (V) << shift;                    \
+        __reg(0xfeff9808) = tm1;                \
+        mb();                                   \
+} while(0)
+
+#define __get_RS(C)     ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; })
+
+#define __clr_RC(C)     do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0)
+
+#define __get_MASK(C)   ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; })
+#define __set_MASK(C)   do { __reg(0xfeff9820) |=  1 << ((C)+16); mb(); } while(0)
+#define __clr_MASK(C)   do { __reg(0xfeff9820) &=  ~(1 << ((C)+16)); mb(); } while(0)
+
+#define __get_MASK_all() __get_MASK(0)
+#define __set_MASK_all() __set_MASK(0)
+#define __clr_MASK_all() __clr_MASK(0)
+
+#define __get_IRL()     ({ (__reg(0xfeff9828) >> 16) & 0xf; })
+#define __clr_IRL()     do { __reg(0xfeff9828) = 0x100000; mb(); } while(0)
+
+#define __get_IRR(N)    ({ __reg(0xfeff9840 + (N) * 8); })
+#define __set_IRR(N,V)  do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0)
+
+#define __get_IITMR(N)  ({ __reg(0xfeff9880 + (N) * 8); })
+#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0)
+
+
+#endif /* _ASM_IRC_REGS */
diff --git a/arch/frv/include/asm/irq.h b/arch/frv/include/asm/irq.h
new file mode 100644
index 000000000000..3a66ebd754bd
--- /dev/null
+++ b/arch/frv/include/asm/irq.h
@@ -0,0 +1,30 @@
+/* irq.h: FRV IRQ definitions
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_H_
+#define _ASM_IRQ_H_
+
+#define NR_IRQS                         48
+#define IRQ_BASE_CPU                    (0 * 16)
+#define IRQ_BASE_FPGA                   (1 * 16)
+#define IRQ_BASE_MB93493                (2 * 16)
+
+/* probe returns a 32-bit IRQ mask:-/ */
+#define MIN_PROBE_IRQ                   (NR_IRQS - 32)
+
+#ifndef __ASSEMBLY__
+static inline int irq_canonicalize(int irq)
+{
+        return irq;
+}
+#endif
+
+#endif /* _ASM_IRQ_H_ */
diff --git a/arch/frv/include/asm/irq_regs.h b/arch/frv/include/asm/irq_regs.h
new file mode 100644
index 000000000000..d22e83289ad1
--- /dev/null
+++ b/arch/frv/include/asm/irq_regs.h
@@ -0,0 +1,27 @@
+/* FRV per-CPU frame pointer holder
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ * - on FRV, GR28 is dedicated to keeping a pointer to the current exception
+ *   frame
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/arch/frv/include/asm/kdebug.h b/arch/frv/include/asm/kdebug.h
new file mode 100644
index 000000000000..6ece1b037665
--- /dev/null
+++ b/arch/frv/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/frv/include/asm/kmap_types.h b/arch/frv/include/asm/kmap_types.h
new file mode 100644
index 000000000000..f8e16b2a5804
--- /dev/null
+++ b/arch/frv/include/asm/kmap_types.h
@@ -0,0 +1,29 @@
+
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+        /* arch specific kmaps - change the numbers attached to these at your peril */
+        __KM_CACHE,             /* cache flush page attachment point */
+        __KM_PGD,               /* current page directory */
+        __KM_ITLB_PTD,          /* current instruction TLB miss page table lookup */
+        __KM_DTLB_PTD,          /* current data TLB miss page table lookup */
+
+        /* general kmaps */
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/frv/include/asm/linkage.h b/arch/frv/include/asm/linkage.h
new file mode 100644
index 000000000000..636c1bced7d4
--- /dev/null
+++ b/arch/frv/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN         .align 4
+#define __ALIGN_STR     ".align 4"
+
+#endif
diff --git a/arch/frv/include/asm/local.h b/arch/frv/include/asm/local.h
new file mode 100644
index 000000000000..c27bdf04630e
--- /dev/null
+++ b/arch/frv/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_LOCAL_H
+#define _ASM_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_LOCAL_H */
diff --git a/arch/frv/include/asm/math-emu.h b/arch/frv/include/asm/math-emu.h
new file mode 100644
index 000000000000..0c8f731b2180
--- /dev/null
+++ b/arch/frv/include/asm/math-emu.h
@@ -0,0 +1,301 @@
+#ifndef _ASM_MATH_EMU_H
+#define _ASM_MATH_EMU_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX  3
+#define FPSR_AEXC_DZ    4
+#define FPSR_AEXC_UNFL  5
+#define FPSR_AEXC_OVFL  6
+#define FPSR_AEXC_IOP   7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1  8
+#define FPSR_EXC_INEX2  9
+#define FPSR_EXC_DZ     10
+#define FPSR_EXC_UNFL   11
+#define FPSR_EXC_OVFL   12
+#define FPSR_EXC_OPERR  13
+#define FPSR_EXC_SNAN   14
+#define FPSR_EXC_BSUN   15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN     24
+#define FPSR_CC_INF     25
+#define FPSR_CC_Z       26
+#define FPSR_CC_NEG     27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define FPCR_ROUND_RN   0               /* round to nearest/even */
+#define FPCR_ROUND_RZ   1               /* round to zero */
+#define FPCR_ROUND_RM   2               /* minus infinity */
+#define FPCR_ROUND_RP   3               /* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X        0       /* long double */
+#define FPCR_PRECISION_S        1       /* double */
+#define FPCR_PRECISION_D        2       /* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE         0
+#define PEXECUTE        1
+#define PCONV           2
+#define PNORM           3
+#define PREGISTER       4
+#define PINSTR          5
+#define PUNIMPL         6
+#define PMOVEM          7
+
+#define PMDECODE        (1<<PDECODE)
+#define PMEXECUTE       (1<<PEXECUTE)
+#define PMCONV          (1<<PCONV)
+#define PMNORM          (1<<PNORM)
+#define PMREGISTER      (1<<PREGISTER)
+#define PMINSTR         (1<<PINSTR)
+#define PMUNIMPL        (1<<PUNIMPL)
+#define PMMOVEM         (1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+        unsigned long long m64;
+        unsigned long m32[2];
+};
+
+union fp_mant128 {
+        unsigned long long m64[2];
+        unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+        unsigned char lowmant;
+        unsigned char sign;
+        unsigned short exp;
+        union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+   below and the size in <asm/fpu.h>, too */
+struct fp_data {
+        struct fp_ext fpreg[8];
+        unsigned int fpcr;
+        unsigned int fpsr;
+        unsigned int fpiar;
+        unsigned short prec;
+        unsigned short rnd;
+        struct fp_ext temp[2];
+};
+
+#if FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({                    \
+        if (fp_debugprint & (1 << (bit)))               \
+                printk(fmt, ## args);                   \
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({                                  \
+        static int __count = 3;                         \
+                                                        \
+        if (__count > 0) {                              \
+                printk("You just hit an unimplemented " \
+                       "fpu instruction (%s)\n", str);  \
+                printk("Please report this to ....\n"); \
+                __count--;                              \
+        }                                               \
+})
+
+#define FPDATA          ((struct fp_data *)current->thread.fp)
+
+#else   /* __ASSEMBLY__ */
+
+#define FPDATA          %a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG       (TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR        (TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR        (TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR       (TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC        (TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND         (TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1     (TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2     (TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF      (TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO          (PT_D0)
+#define FPS_D1          (PT_D1)
+#define FPS_D2          (PT_D2)
+#define FPS_A0          (PT_A0)
+#define FPS_A1          (PT_A1)
+#define FPS_A2          (PT_A2)
+#define FPS_SR          (PT_SR)
+#define FPS_PC          (PT_PC)
+#define FPS_EA          (PT_PC+6)
+#define FPS_PC2         (PT_PC+10)
+
+.macro  fp_get_fp_reg
+        lea     (FPD_FPREG,FPDATA,%d0.w*4),%a0
+        lea     (%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro  fp_get_pc dest
+        move.l  (FPS_PC+4,%sp),\dest
+.endm
+
+.macro  fp_put_pc src,jump=0
+        move.l  \src,(FPS_PC+4,%sp)
+.endm
+
+.macro  fp_get_instr_data       f,s,dest,label
+        getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+        addq.l  #\s,%sp@(FPS_PC+4)
+.endm
+
+.macro  fp_get_instr_word       dest,label,addr
+        fp_get_instr_data       w,2,\dest,\label,\addr
+.endm
+
+.macro  fp_get_instr_long       dest,label,addr
+        fp_get_instr_data       l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro  getuser size,src,dest,label,addr
+|       printf  ,"[\size<%08x]",1,\addr
+.Lu1\@: moves\size      \src,\dest
+
+        .section .fixup,"ax"
+        .even
+.Lu2\@: move.l  \addr,%a0
+        jra     \label
+        .previous
+
+        .section __ex_table,"a"
+        .align  4
+        .long   .Lu1\@,.Lu2\@
+        .previous
+.endm
+
+.macro  putuser size,src,dest,label,addr
+|       printf  ,"[\size>%08x]",1,\addr
+.Lu1\@: moves\size      \src,\dest
+.Lu2\@:
+
+        .section .fixup,"ax"
+        .even
+.Lu3\@: move.l  \addr,%a0
+        jra     \label
+        .previous
+
+        .section __ex_table,"a"
+        .align  4
+        .long   .Lu1\@,.Lu3\@
+        .long   .Lu2\@,.Lu3\@
+        .previous
+.endm
+
+
+.macro  movestack       nr,arg1,arg2,arg3,arg4,arg5
+        .if     \nr
+        movestack       (\nr-1),\arg2,\arg3,\arg4,\arg5
+        move.l  \arg1,-(%sp)
+        .endif
+.endm
+
+.macro  printf  bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+        .data
+.Lpdata\@:
+        .string "\string"
+        .previous
+
+        movem.l %d0/%d1/%a0/%a1,-(%sp)
+        .if     \bit+1
+#if 0
+        moveq   #\bit,%d0
+        andw    #7,%d0
+        btst    %d0,fp_debugprint+((31-\bit)/8)
+#else
+        btst    #\bit,fp_debugprint+((31-\bit)/8)
+#endif
+        jeq     .Lpskip\@
+        .endif
+        movestack       \nr,\arg1,\arg2,\arg3,\arg4,\arg5
+        pea     .Lpdata\@
+        jsr     printk
+        lea     ((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+        movem.l (%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro  printx  bit,fp
+#ifdef FPU_EMU_DEBUG
+        movem.l %d0/%a0,-(%sp)
+        lea     \fp,%a0
+#if 0
+        moveq   #'+',%d0
+        tst.w   (%a0)
+        jeq     .Lx1\@
+        moveq   #'-',%d0
+.Lx1\@: printf  \bit," %c",1,%d0
+        move.l  (4,%a0),%d0
+        bclr    #31,%d0
+        jne     .Lx2\@
+        printf  \bit,"0."
+        jra     .Lx3\@
+.Lx2\@: printf  \bit,"1."
+.Lx3\@: printf  \bit,"%08x%08x",2,%d0,%a0@(8)
+        move.w  (2,%a0),%d0
+        ext.l   %d0
+        printf  \bit,"E%04x",1,%d0
+#else
+        printf  \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+        movem.l (%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro  debug   instr,args
+#ifdef FPU_EMU_DEBUG
+        \instr  \args
+#endif
+.endm
+
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_FRV_MATH_EMU_H */
+
diff --git a/arch/frv/include/asm/mb-regs.h b/arch/frv/include/asm/mb-regs.h
new file mode 100644
index 000000000000..219e5f926f18
--- /dev/null
+++ b/arch/frv/include/asm/mb-regs.h
@@ -0,0 +1,200 @@
+/* mb-regs.h: motherboard registers
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB_REGS_H
+#define _ASM_MB_REGS_H
+
+#include <asm/cpu-irqs.h>
+#include <asm/sections.h>
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/* gcc builtins, annotated */
+
+unsigned long __builtin_read8(volatile void __iomem *);
+unsigned long __builtin_read16(volatile void __iomem *);
+unsigned long __builtin_read32(volatile void __iomem *);
+void __builtin_write8(volatile void __iomem *, unsigned char);
+void __builtin_write16(volatile void __iomem *, unsigned short);
+void __builtin_write32(volatile void __iomem *, unsigned long);
+#endif
+
+#define __region_IO     KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable
+                                         * protection laid over the top for use in memory-mapped
+                                         * I/O
+                                         */
+
+#define __region_CS0    0xff000000      /* Boot ROMs area */
+
+#ifdef CONFIG_MB93091_VDK
+/*
+ * VDK motherboard and CPU card specific stuff
+ */
+
+#include <asm/mb93091-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0       IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1       IRQ_CPU_EXTERNAL1
+
+#define __region_CS2    0xe0000000      /* SLBUS/PCI I/O space */
+#define __region_CS2_M          0x0fffffff /* mask */
+#define __region_CS2_C          0x00000000 /* control */
+#define __region_CS5    0xf0000000      /* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M          0x00ffffff
+#define __region_CS5_C          0x00010000
+#define __region_CS7    0xf1000000      /* CB70 CPU-card PCMCIA port I/O space */
+#define __region_CS7_M          0x00ffffff
+#define __region_CS7_C          0x00410701
+#define __region_CS1    0xfc000000      /* SLBUS/PCI bridge control registers */
+#define __region_CS1_M          0x000fffff
+#define __region_CS1_C          0x00000000
+#define __region_CS6    0xfc100000      /* CB70 CPU-card DM9000 LAN I/O space */
+#define __region_CS6_M          0x000fffff
+#define __region_CS6_C          0x00400707
+#define __region_CS3    0xfc200000      /* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M          0x000fffff
+#define __region_CS3_C          0xc8100000
+#define __region_CS4    0xfd000000      /* CB70 CPU-card extra flash space */
+#define __region_CS4_M          0x00ffffff
+#define __region_CS4_C          0x00000f07
+
+#define __region_PCI_IO         (__region_CS2 + 0x04000000UL)
+#define __region_PCI_MEM        (__region_CS2 + 0x08000000UL)
+#define __flush_PCI_writes()                                            \
+do {                                                                    \
+        __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0);        \
+} while(0)
+
+#define __is_PCI_IO(addr) \
+        (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24)  < (0x04000000UL >> 24))
+
+#define __is_PCI_MEM(addr) \
+        ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL)
+
+#define __is_PCI_addr(addr) \
+        ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL)
+
+#define __get_CLKSW()   ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; })
+#define __get_CLKIN()   (__get_CLKSW() * 125U * 100000U / 24U)
+
+#ifndef __ASSEMBLY__
+extern int __nongprelbss mb93090_mb00_detected;
+#endif
+
+#define __addr_LEDS()           (__region_CS2 + 0x01200004UL)
+#ifdef CONFIG_MB93090_MB00
+#define __set_LEDS(X)                                                   \
+do {                                                                    \
+        if (mb93090_mb00_detected)                                      \
+                __builtin_write32((void __iomem *) __addr_LEDS(), ~(X));        \
+} while (0)
+#else
+#define __set_LEDS(X)
+#endif
+
+#define __addr_LCD()            (__region_CS2 + 0x01200008UL)
+#define __get_LCD(B)            __builtin_read32((volatile void __iomem *) (B))
+#define __set_LCD(B,X)          __builtin_write32((volatile void __iomem *) (B), (X))
+
+#define LCD_D                   0x000000ff              /* LCD data bus */
+#define LCD_RW                  0x00000100              /* LCD R/W signal */
+#define LCD_RS                  0x00000200              /* LCD Register Select */
+#define LCD_E                   0x00000400              /* LCD Start Enable Signal */
+
+#define LCD_CMD_CLEAR           (LCD_E|0x001)
+#define LCD_CMD_HOME            (LCD_E|0x002)
+#define LCD_CMD_CURSOR_INC      (LCD_E|0x004)
+#define LCD_CMD_SCROLL_INC      (LCD_E|0x005)
+#define LCD_CMD_CURSOR_DEC      (LCD_E|0x006)
+#define LCD_CMD_SCROLL_DEC      (LCD_E|0x007)
+#define LCD_CMD_OFF             (LCD_E|0x008)
+#define LCD_CMD_ON(CRSR,BLINK)  (LCD_E|0x00c|(CRSR<<1)|BLINK)
+#define LCD_CMD_CURSOR_MOVE_L   (LCD_E|0x010)
+#define LCD_CMD_CURSOR_MOVE_R   (LCD_E|0x014)
+#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018)
+#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c)
+#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2))
+#define LCD_CMD_SET_CG_ADDR(X)  (LCD_E|0x040|X)
+#define LCD_CMD_SET_DD_ADDR(X)  (LCD_E|0x080|X)
+#define LCD_CMD_READ_BUSY       (LCD_E|LCD_RW)
+#define LCD_DATA_WRITE(X)       (LCD_E|LCD_RS|(X))
+#define LCD_DATA_READ           (LCD_E|LCD_RS|LCD_RW)
+
+#else
+/*
+ * PDK unit specific stuff
+ */
+
+#include <asm/mb93093-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0       IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1       IRQ_CPU_EXTERNAL1
+
+#define __region_CS5    0xf0000000      /* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M          0x00ffffff /* mask */
+#define __region_CS5_C          0x00010000 /* control */
+#define __region_CS2    0x20000000      /* FPGA registers */
+#define __region_CS2_M          0x000fffff
+#define __region_CS2_C          0x00000000
+#define __region_CS1    0xfc100000      /* LAN registers */
+#define __region_CS1_M          0x000fffff
+#define __region_CS1_C          0x00010404
+#define __region_CS3    0xfc200000      /* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M          0x000fffff
+#define __region_CS3_C          0xc8000000
+#define __region_CS4    0xfd000000      /* extra ROMs area */
+#define __region_CS4_M          0x00ffffff
+#define __region_CS4_C          0x00000f07
+
+#define __region_CS6    0xfe000000      /* not used - hide behind CPU resource I/O regs */
+#define __region_CS6_M          0x000fffff
+#define __region_CS6_C          0x00000f07
+#define __region_CS7    0xfe000000      /* not used - hide behind CPU resource I/O regs */
+#define __region_CS7_M          0x000fffff
+#define __region_CS7_C          0x00000f07
+
+#define __is_PCI_IO(addr)       0       /* no PCI */
+#define __is_PCI_MEM(addr)      0
+#define __is_PCI_addr(addr)     0
+#define __region_PCI_IO         0
+#define __region_PCI_MEM        0
+#define __flush_PCI_writes()    do { } while(0)
+
+#define __get_CLKSW()           0UL
+#define __get_CLKIN()           66000000UL
+
+#define __addr_LEDS()           (__region_CS2 + 0x00000023UL)
+#define __set_LEDS(X)           __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X))
+
+#define __addr_FPGATR()         (__region_CS2 + 0x00000030UL)
+#define __set_FPGATR(X)         __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X))
+#define __get_FPGATR()          __builtin_read32((volatile void __iomem *) __addr_FPGATR())
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK   0x00000003
+
+#define __set_FPGATR_AUDIO_CLK(V) \
+        __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V))
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF       0x0
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz     0x1
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz     0x2
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz     0x3
+
+#define MB93093_FPGA_SWR_PUSHSWMASK     (0x1F<<26)
+#define MB93093_FPGA_SWR_PUSHSW4        (1<<29)
+
+#define __addr_FPGA_SWR         ((volatile void __iomem *)(__region_CS2 + 0x28UL))
+#define __get_FPGA_PUSHSW1_5()  (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK)
+
+
+#endif
+
+#endif /* _ASM_MB_REGS_H */
diff --git a/arch/frv/include/asm/mb86943a.h b/arch/frv/include/asm/mb86943a.h
new file mode 100644
index 000000000000..e87ef924bfb4
--- /dev/null
+++ b/arch/frv/include/asm/mb86943a.h
@@ -0,0 +1,42 @@
+/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB86943A_H
+#define _ASM_MB86943A_H
+
+#include <asm/mb-regs.h>
+
+#define __reg_MB86943_sl_ctl            *(volatile uint32_t *) (__region_CS1 + 0x00)
+
+#define MB86943_SL_CTL_BUS_WIDTH_64     0x00000001
+#define MB86943_SL_CTL_AS_HOST          0x00000002
+#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004
+#define MB86943_SL_CTL_DRCT_SLAVE_SWAP  0x00000008
+#define MB86943_SL_CTL_PCI_CONFIG_SWAP  0x00000010
+#define MB86943_SL_CTL_ECS0_ENABLE      0x00000020
+#define MB86943_SL_CTL_ECS1_ENABLE      0x00000040
+#define MB86943_SL_CTL_ECS2_ENABLE      0x00000080
+
+#define __reg_MB86943_ecs_ctl(N)        *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N)))
+#define __reg_MB86943_ecs_range(N)      *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N)))
+#define __reg_MB86943_ecs_base(N)       *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N)))
+
+#define __reg_MB86943_sl_pci_io_range   *(volatile uint32_t *) (__region_CS1 + 0x50)
+#define __reg_MB86943_sl_pci_io_base    *(volatile uint32_t *) (__region_CS1 + 0x58)
+#define __reg_MB86943_sl_pci_mem_range  *(volatile uint32_t *) (__region_CS1 + 0x60)
+#define __reg_MB86943_sl_pci_mem_base   *(volatile uint32_t *) (__region_CS1 + 0x68)
+#define __reg_MB86943_pci_sl_io_base    *(volatile uint32_t *) (__region_CS1 + 0x70)
+#define __reg_MB86943_pci_sl_mem_base   *(volatile uint32_t *) (__region_CS1 + 0x78)
+
+#define __reg_MB86943_pci_arbiter       *(volatile uint32_t *) (__region_CS2 + 0x01300014)
+#define MB86943_PCIARB_EN               0x00000001
+
+#endif /* _ASM_MB86943A_H */
diff --git a/arch/frv/include/asm/mb93091-fpga-irqs.h b/arch/frv/include/asm/mb93091-fpga-irqs.h
new file mode 100644
index 000000000000..19778c5ba9d6
--- /dev/null
+++ b/arch/frv/include/asm/mb93091-fpga-irqs.h
@@ -0,0 +1,42 @@
+/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93091_FPGA_IRQS_H
+#define _ASM_MB93091_FPGA_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+        IRQ_FPGA__UNUSED                        = IRQ_BASE_FPGA,
+        IRQ_FPGA_SYSINT_BUS_EXPANSION_1,
+        IRQ_FPGA_SL_BUS_EXPANSION_2,
+        IRQ_FPGA_PCI_INTD,
+        IRQ_FPGA_PCI_INTC,
+        IRQ_FPGA_PCI_INTB,
+        IRQ_FPGA_PCI_INTA,
+        IRQ_FPGA_SL_BUS_EXPANSION_7,
+        IRQ_FPGA_SYSINT_BUS_EXPANSION_8,
+        IRQ_FPGA_SL_BUS_EXPANSION_9,
+        IRQ_FPGA_MB86943_PCI_INTA,
+        IRQ_FPGA_MB86943_SLBUS_SIDE,
+        IRQ_FPGA_RTL8029_INTA,
+        IRQ_FPGA_SYSINT_BUS_EXPANSION_13,
+        IRQ_FPGA_SL_BUS_EXPANSION_14,
+        IRQ_FPGA_NMI,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93091_FPGA_IRQS_H */
diff --git a/arch/frv/include/asm/mb93093-fpga-irqs.h b/arch/frv/include/asm/mb93093-fpga-irqs.h
new file mode 100644
index 000000000000..590266b1a6d3
--- /dev/null
+++ b/arch/frv/include/asm/mb93093-fpga-irqs.h
@@ -0,0 +1,29 @@
+/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93093_FPGA_IRQS_H
+#define _ASM_MB93093_FPGA_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+        IRQ_FPGA_PUSH_BUTTON_SW1_5              = IRQ_BASE_FPGA + 8,
+        IRQ_FPGA_ROCKER_C_SW8                   = IRQ_BASE_FPGA + 9,
+        IRQ_FPGA_ROCKER_C_SW9                   = IRQ_BASE_FPGA + 10,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93093_FPGA_IRQS_H */
diff --git a/arch/frv/include/asm/mb93493-irqs.h b/arch/frv/include/asm/mb93493-irqs.h
new file mode 100644
index 000000000000..82c7aeddd333
--- /dev/null
+++ b/arch/frv/include/asm/mb93493-irqs.h
@@ -0,0 +1,50 @@
+/* mb93493-irqs.h: MB93493 companion chip IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_IRQS_H
+#define _ASM_MB93493_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+        IRQ_MB93493_VDC                 = IRQ_BASE_MB93493 + 0,
+        IRQ_MB93493_VCC                 = IRQ_BASE_MB93493 + 1,
+        IRQ_MB93493_AUDIO_OUT           = IRQ_BASE_MB93493 + 2,
+        IRQ_MB93493_I2C_0               = IRQ_BASE_MB93493 + 3,
+        IRQ_MB93493_I2C_1               = IRQ_BASE_MB93493 + 4,
+        IRQ_MB93493_USB                 = IRQ_BASE_MB93493 + 5,
+        IRQ_MB93493_LOCAL_BUS           = IRQ_BASE_MB93493 + 7,
+        IRQ_MB93493_PCMCIA              = IRQ_BASE_MB93493 + 8,
+        IRQ_MB93493_GPIO                = IRQ_BASE_MB93493 + 9,
+        IRQ_MB93493_AUDIO_IN            = IRQ_BASE_MB93493 + 10,
+};
+
+/* IRQ multiplexor mappings */
+#define ROUTE_VIA_IRQ0  0       /* route IRQ by way of CPU external IRQ 0 */
+#define ROUTE_VIA_IRQ1  1       /* route IRQ by way of CPU external IRQ 1 */
+
+#define IRQ_MB93493_VDC_ROUTE           ROUTE_VIA_IRQ0
+#define IRQ_MB93493_VCC_ROUTE           ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_OUT_ROUTE     ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_0_ROUTE         ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_1_ROUTE         ROUTE_VIA_IRQ1
+#define IRQ_MB93493_USB_ROUTE           ROUTE_VIA_IRQ1
+#define IRQ_MB93493_LOCAL_BUS_ROUTE     ROUTE_VIA_IRQ1
+#define IRQ_MB93493_PCMCIA_ROUTE        ROUTE_VIA_IRQ1
+#define IRQ_MB93493_GPIO_ROUTE          ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_IN_ROUTE      ROUTE_VIA_IRQ1
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93493_IRQS_H */
diff --git a/arch/frv/include/asm/mb93493-regs.h b/arch/frv/include/asm/mb93493-regs.h
new file mode 100644
index 000000000000..8a1f6aac8cf1
--- /dev/null
+++ b/arch/frv/include/asm/mb93493-regs.h
@@ -0,0 +1,281 @@
+/* mb93493-regs.h: MB93493 companion chip registers
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_REGS_H
+#define _ASM_MB93493_REGS_H
+
+#include <asm/mb-regs.h>
+#include <asm/mb93493-irqs.h>
+
+#define __addr_MB93493(X)       ((volatile unsigned long *)(__region_CS3 + (X)))
+#define __get_MB93493(X)        ({ *(volatile unsigned long *)(__region_CS3 + (X)); })
+
+#define __set_MB93493(X,V)                                              \
+do {                                                                    \
+        *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb();    \
+} while(0)
+
+#define __get_MB93493_STSR(X)   __get_MB93493(0x3c0 + (X) * 4)
+#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V))
+#define MB93493_STSR_EN
+
+#define __addr_MB93493_IQSR(X)  __addr_MB93493(0x3d0 + (X) * 4)
+#define __get_MB93493_IQSR(X)   __get_MB93493(0x3d0 + (X) * 4)
+#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V))
+
+#define __get_MB93493_DQSR(X)   __get_MB93493(0x3e0 + (X) * 4)
+#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V))
+
+#define __get_MB93493_LBSER()   __get_MB93493(0x3f0)
+#define __set_MB93493_LBSER(V)  __set_MB93493(0x3f0, (V))
+
+#define MB93493_LBSER_VDC       0x00010000
+#define MB93493_LBSER_VCC       0x00020000
+#define MB93493_LBSER_AUDIO     0x00040000
+#define MB93493_LBSER_I2C_0     0x00080000
+#define MB93493_LBSER_I2C_1     0x00100000
+#define MB93493_LBSER_USB       0x00200000
+#define MB93493_LBSER_GPIO      0x00800000
+#define MB93493_LBSER_PCMCIA    0x01000000
+
+#define __get_MB93493_LBSR()    __get_MB93493(0x3fc)
+#define __set_MB93493_LBSR(V)   __set_MB93493(0x3fc, (V))
+
+/*
+ * video display controller
+ */
+#define __get_MB93493_VDC(X)    __get_MB93493(MB93493_VDC_##X)
+#define __set_MB93493_VDC(X,V)  __set_MB93493(MB93493_VDC_##X, (V))
+
+#define MB93493_VDC_RCURSOR     0x140   /* cursor position */
+#define MB93493_VDC_RCT1        0x144   /* cursor colour 1 */
+#define MB93493_VDC_RCT2        0x148   /* cursor colour 2 */
+#define MB93493_VDC_RHDC        0x150   /* horizontal display period */
+#define MB93493_VDC_RH_MARGINS  0x154   /* horizontal margin sizes */
+#define MB93493_VDC_RVDC        0x158   /* vertical display period */
+#define MB93493_VDC_RV_MARGINS  0x15c   /* vertical margin sizes */
+#define MB93493_VDC_RC          0x170   /* VDC control */
+#define MB93493_VDC_RCLOCK      0x174   /* clock divider, DMA req delay */
+#define MB93493_VDC_RBLACK      0x178   /* black insert sizes */
+#define MB93493_VDC_RS          0x17c   /* VDC status */
+
+#define __addr_MB93493_VDC_BCI(X)  ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); })
+#define __addr_MB93493_VDC_TPO(X)  (__region_CS3 + 0x1c0 + (X))
+
+#define VDC_TPO_WIDTH           32
+
+#define VDC_RC_DSR              0x00000080      /* VDC master reset */
+
+#define VDC_RS_IT               0x00060000      /* interrupt indicators */
+#define VDC_RS_IT_UNDERFLOW     0x00040000      /* - underflow event */
+#define VDC_RS_IT_VSYNC         0x00020000      /* - VSYNC event */
+#define VDC_RS_DFI              0x00010000      /* current interlace field number */
+#define VDC_RS_DFI_TOP          0x00000000      /* - top field */
+#define VDC_RS_DFI_BOTTOM       0x00010000      /* - bottom field */
+#define VDC_RS_DCSR             0x00000010      /* cursor state */
+#define VDC_RS_DCM              0x00000003      /* display mode */
+#define VDC_RS_DCM_DISABLED     0x00000000      /* - display disabled */
+#define VDC_RS_DCM_STOPPED      0x00000001      /* - VDC stopped */
+#define VDC_RS_DCM_FREERUNNING  0x00000002      /* - VDC free-running */
+#define VDC_RS_DCM_TRANSFERRING 0x00000003      /* - data being transferred to VDC */
+
+/*
+ * video capture controller
+ */
+#define __get_MB93493_VCC(X)    __get_MB93493(MB93493_VCC_##X)
+#define __set_MB93493_VCC(X,V)  __set_MB93493(MB93493_VCC_##X, (V))
+
+#define MB93493_VCC_RREDUCT     0x104   /* reduction rate */
+#define MB93493_VCC_RHY         0x108   /* horizontal brightness filter coefficients */
+#define MB93493_VCC_RHC         0x10c   /* horizontal colour-difference filter coefficients */
+#define MB93493_VCC_RHSIZE      0x110   /* horizontal cycle sizes */
+#define MB93493_VCC_RHBC        0x114   /* horizontal back porch size */
+#define MB93493_VCC_RVCC        0x118   /* vertical capture period */
+#define MB93493_VCC_RVBC        0x11c   /* vertical back porch period */
+#define MB93493_VCC_RV          0x120   /* vertical filter coefficients */
+#define MB93493_VCC_RDTS        0x128   /* DMA transfer size */
+#define MB93493_VCC_RDTS_4B     0x01000000      /* 4-byte transfer */
+#define MB93493_VCC_RDTS_32B    0x03000000      /* 32-byte transfer */
+#define MB93493_VCC_RDTS_SHIFT  24
+#define MB93493_VCC_RCC         0x130   /* VCC control */
+#define MB93493_VCC_RIS         0x134   /* VCC interrupt status */
+
+#define __addr_MB93493_VCC_TPI(X)  (__region_CS3 + 0x180 + (X))
+
+#define VCC_RHSIZE_RHCC         0x000007ff
+#define VCC_RHSIZE_RHCC_SHIFT   0
+#define VCC_RHSIZE_RHTCC        0x0fff0000
+#define VCC_RHSIZE_RHTCC_SHIFT  16
+
+#define VCC_RVBC_RVBC           0x00003f00
+#define VCC_RVBC_RVBC_SHIFT     8
+
+#define VCC_RREDUCT_RHR         0x07ff0000
+#define VCC_RREDUCT_RHR_SHIFT   16
+#define VCC_RREDUCT_RVR         0x000007ff
+#define VCC_RREDUCT_RVR_SHIFT   0
+
+#define VCC_RCC_CE              0x00000001      /* VCC enable */
+#define VCC_RCC_CS              0x00000002      /* request video capture start */
+#define VCC_RCC_CPF             0x0000000c      /* pixel format */
+#define VCC_RCC_CPF_YCBCR_16    0x00000000      /* - YCbCr 4:2:2 16-bit format */
+#define VCC_RCC_CPF_RGB         0x00000004      /* - RGB 4:4:4 format */
+#define VCC_RCC_CPF_YCBCR_24    0x00000008      /* - YCbCr 4:2:2 24-bit format */
+#define VCC_RCC_CPF_BT656       0x0000000c      /* - ITU R-BT.656 format */
+#define VCC_RCC_CPF_SHIFT       2
+#define VCC_RCC_CSR             0x00000080      /* request reset */
+#define VCC_RCC_HSIP            0x00000100      /* HSYNC polarity */
+#define VCC_RCC_HSIP_LOACT      0x00000000      /* - low active */
+#define VCC_RCC_HSIP_HIACT      0x00000100      /* - high active */
+#define VCC_RCC_VSIP            0x00000200      /* VSYNC polarity */
+#define VCC_RCC_VSIP_LOACT      0x00000000      /* - low active */
+#define VCC_RCC_VSIP_HIACT      0x00000200      /* - high active */
+#define VCC_RCC_CIE             0x00000800      /* interrupt enable */
+#define VCC_RCC_CFP             0x00001000      /* RGB pixel packing */
+#define VCC_RCC_CFP_4TO3        0x00000000      /* - pack 4 pixels into 3 words */
+#define VCC_RCC_CFP_1TO1        0x00001000      /* - pack 1 pixel into 1 words */
+#define VCC_RCC_CSM             0x00006000      /* interlace specification */
+#define VCC_RCC_CSM_ONEPASS     0x00002000      /* - non-interlaced */
+#define VCC_RCC_CSM_INTERLACE   0x00004000      /* - interlaced */
+#define VCC_RCC_CSM_SHIFT       13
+#define VCC_RCC_ES              0x00008000      /* capture start polarity */
+#define VCC_RCC_ES_NEG          0x00000000      /* - negative edge */
+#define VCC_RCC_ES_POS          0x00008000      /* - positive edge */
+#define VCC_RCC_IFI             0x00080000      /* inferlace field evaluation reverse */
+#define VCC_RCC_FDTS            0x00300000      /* interlace field start */
+#define VCC_RCC_FDTS_3_8        0x00000000      /* - 3/8 of horizontal entire cycle */
+#define VCC_RCC_FDTS_1_4        0x00100000      /* - 1/4 of horizontal entire cycle */
+#define VCC_RCC_FDTS_7_16       0x00200000      /* - 7/16 of horizontal entire cycle */
+#define VCC_RCC_FDTS_SHIFT      20
+#define VCC_RCC_MOV             0x00400000      /* test bit - always set to 1 */
+#define VCC_RCC_STP             0x00800000      /* request video capture stop */
+#define VCC_RCC_TO              0x01000000      /* input during top-field only */
+
+#define VCC_RIS_VSYNC           0x01000000      /* VSYNC interrupt */
+#define VCC_RIS_OV              0x02000000      /* overflow interrupt */
+#define VCC_RIS_BOTTOM          0x08000000      /* interlace bottom field */
+#define VCC_RIS_STARTED         0x10000000      /* capture started */
+
+/*
+ * I2C
+ */
+#define MB93493_I2C_BSR         0x340           /* bus status */
+#define MB93493_I2C_BCR         0x344           /* bus control */
+#define MB93493_I2C_CCR         0x348           /* clock control */
+#define MB93493_I2C_ADR         0x34c           /* address */
+#define MB93493_I2C_DTR         0x350           /* data */
+#define MB93493_I2C_BC2R        0x35c           /* bus control 2 */
+
+#define __addr_MB93493_I2C(port,X)   (__region_CS3 + MB93493_I2C_##X + ((port)*0x20))
+#define __get_MB93493_I2C(port,X)    __get_MB93493(MB93493_I2C_##X + ((port)*0x20))
+#define __set_MB93493_I2C(port,X,V)  __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V))
+
+#define I2C_BSR_BB      (1 << 7)
+
+/*
+ * audio controller (I2S) registers
+ */
+#define __get_MB93493_I2S(X)    __get_MB93493(MB93493_I2S_##X)
+#define __set_MB93493_I2S(X,V)  __set_MB93493(MB93493_I2S_##X, (V))
+
+#define MB93493_I2S_ALDR        0x300           /* L-channel data */
+#define MB93493_I2S_ARDR        0x304           /* R-channel data */
+#define MB93493_I2S_APDR        0x308           /* 16-bit packed data */
+#define MB93493_I2S_AISTR       0x310           /* status */
+#define MB93493_I2S_AICR        0x314           /* control */
+
+#define __addr_MB93493_I2S_ALDR(X)      (__region_CS3 + MB93493_I2S_ALDR + (X))
+#define __addr_MB93493_I2S_ARDR(X)      (__region_CS3 + MB93493_I2S_ARDR + (X))
+#define __addr_MB93493_I2S_APDR(X)      (__region_CS3 + MB93493_I2S_APDR + (X))
+#define __addr_MB93493_I2S_ADR(X)       (__region_CS3 + 0x320 + (X))
+
+#define I2S_AISTR_OTST          0x00000003      /* status of output data transfer */
+#define I2S_AISTR_OTR           0x00000010      /* output transfer request pending */
+#define I2S_AISTR_OUR           0x00000020      /* output FIFO underrun detected */
+#define I2S_AISTR_OOR           0x00000040      /* output FIFO overrun detected */
+#define I2S_AISTR_ODS           0x00000100      /* output DMA transfer size */
+#define I2S_AISTR_ODE           0x00000400      /* output DMA transfer request enable */
+#define I2S_AISTR_OTRIE         0x00001000      /* output transfer request interrupt enable */
+#define I2S_AISTR_OURIE         0x00002000      /* output FIFO underrun interrupt enable */
+#define I2S_AISTR_OORIE         0x00004000      /* output FIFO overrun interrupt enable */
+#define I2S_AISTR__OUT_MASK     0x00007570
+#define I2S_AISTR_ITST          0x00030000      /* status of input data transfer */
+#define I2S_AISTR_ITST_SHIFT    16
+#define I2S_AISTR_ITR           0x00100000      /* input transfer request pending */
+#define I2S_AISTR_IUR           0x00200000      /* input FIFO underrun detected */
+#define I2S_AISTR_IOR           0x00400000      /* input FIFO overrun detected */
+#define I2S_AISTR_IDS           0x01000000      /* input DMA transfer size */
+#define I2S_AISTR_IDE           0x04000000      /* input DMA transfer request enable */
+#define I2S_AISTR_ITRIE         0x10000000      /* input transfer request interrupt enable */
+#define I2S_AISTR_IURIE         0x20000000      /* input FIFO underrun interrupt enable */
+#define I2S_AISTR_IORIE         0x40000000      /* input FIFO overrun interrupt enable */
+#define I2S_AISTR__IN_MASK      0x75700000
+
+#define I2S_AICR_MI             0x00000001      /* mono input requested */
+#define I2S_AICR_AMI            0x00000002      /* relation between LRCKI/FS1 and SDI */
+#define I2S_AICR_LRI            0x00000004      /* function of LRCKI pin */
+#define I2S_AICR_SDMI           0x00000070      /* format of input audio data */
+#define I2S_AICR_SDMI_SHIFT     4
+#define I2S_AICR_CLI            0x00000080      /* input FIFO clearing control */
+#define I2S_AICR_IM             0x00000300      /* input state control */
+#define I2S_AICR_IM_SHIFT       8
+#define I2S_AICR__IN_MASK       0x000003f7
+#define I2S_AICR_MO             0x00001000      /* mono output requested */
+#define I2S_AICR_AMO            0x00002000      /* relation between LRCKO/FS0 and SDO */
+#define I2S_AICR_AMO_SHIFT      13
+#define I2S_AICR_LRO            0x00004000      /* function of LRCKO pin */
+#define I2S_AICR_SDMO           0x00070000      /* format of output audio data */
+#define I2S_AICR_SDMO_SHIFT     16
+#define I2S_AICR_CLO            0x00080000      /* output FIFO clearing control */
+#define I2S_AICR_OM             0x00100000      /* output state control */
+#define I2S_AICR__OUT_MASK      0x001f7000
+#define I2S_AICR_DIV            0x03000000      /* frequency division rate */
+#define I2S_AICR_DIV_SHIFT      24
+#define I2S_AICR_FL             0x20000000      /* frame length */
+#define I2S_AICR_FS             0x40000000      /* frame sync method */
+#define I2S_AICR_ME             0x80000000      /* master enable */
+
+/*
+ * PCMCIA
+ */
+#define __addr_MB93493_PCMCIA(X)  ((volatile unsigned long *)(__region_CS5 + (X)))
+
+/*
+ * GPIO
+ */
+#define __get_MB93493_GPIO_PDR(X)       __get_MB93493(0x380 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDR(X,V)     __set_MB93493(0x380 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_GPDR(X)      __get_MB93493(0x384 + (X) * 0xc0)
+#define __set_MB93493_GPIO_GPDR(X,V)    __set_MB93493(0x384 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SIR(X)       __get_MB93493(0x388 + (X) * 0xc0)
+#define __set_MB93493_GPIO_SIR(X,V)     __set_MB93493(0x388 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SOR(X)       __get_MB93493(0x38c + (X) * 0xc0)
+#define __set_MB93493_GPIO_SOR(X,V)     __set_MB93493(0x38c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDSR(X)      __get_MB93493(0x390 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDSR(X,V)    __set_MB93493(0x390 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDCR(X)      __get_MB93493(0x394 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDCR(X,V)    __set_MB93493(0x394 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_INTST(X)     __get_MB93493(0x398 + (X) * 0xc0)
+#define __set_MB93493_GPIO_INTST(X,V)   __set_MB93493(0x398 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IEHL(X)      __get_MB93493(0x39c + (X) * 0xc0)
+#define __set_MB93493_GPIO_IEHL(X,V)    __set_MB93493(0x39c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IELH(X)      __get_MB93493(0x3a0 + (X) * 0xc0)
+#define __set_MB93493_GPIO_IELH(X,V)    __set_MB93493(0x3a0 + (X) * 0xc0, (V))
+
+#endif /* _ASM_MB93493_REGS_H */
diff --git a/arch/frv/include/asm/mc146818rtc.h b/arch/frv/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..90dfb7a633d1
--- /dev/null
+++ b/arch/frv/include/asm/mc146818rtc.h
@@ -0,0 +1,16 @@
+/* mc146818rtc.h: RTC defs
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h
new file mode 100644
index 000000000000..2947764fc0e0
--- /dev/null
+++ b/arch/frv/include/asm/mem-layout.h
@@ -0,0 +1,86 @@
+/* mem-layout.h: memory layout
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MEM_LAYOUT_H
+#define _ASM_MEM_LAYOUT_H
+
+#ifndef __ASSEMBLY__
+#define __UL(X) ((unsigned long) (X))
+#else
+#define __UL(X) (X)
+#endif
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#define PAGE_SHIFT                      14
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE                       (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE                       (1 << PAGE_SHIFT)
+#endif
+
+#define PAGE_MASK                       (~(PAGE_SIZE-1))
+
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define ARCH_KMALLOC_MINALIGN           8
+#define ARCH_SLAB_MINALIGN              8
+
+/*****************************************************************************/
+/*
+ * virtual memory layout from kernel's point of view
+ */
+#define PAGE_OFFSET                     ((unsigned long) &__page_offset)
+
+#ifdef CONFIG_MMU
+
+/* see Documentation/frv/mmu-layout.txt */
+#define KERNEL_LOWMEM_START             __UL(0xc0000000)
+#define KERNEL_LOWMEM_END               __UL(0xd0000000)
+#define VMALLOC_START                   __UL(0xd0000000)
+#define VMALLOC_END                     __UL(0xd8000000)
+#define PKMAP_BASE                      __UL(0xd8000000)
+#define PKMAP_END                       __UL(0xdc000000)
+#define KMAP_ATOMIC_SECONDARY_FRAME     __UL(0xdc000000)
+#define KMAP_ATOMIC_PRIMARY_FRAME       __UL(0xdd000000)
+
+#endif
+
+#define KERNEL_IO_START                 __UL(0xe0000000)
+
+
+/*****************************************************************************/
+/*
+ * memory layout from userspace's point of view
+ */
+#define BRK_BASE                        __UL(2 * 1024 * 1024 + PAGE_SIZE)
+#define STACK_TOP                       __UL(2 * 1024 * 1024)
+#define STACK_TOP_MAX                   __UL(0xc0000000)
+
+/* userspace process size */
+#ifdef CONFIG_MMU
+#define TASK_SIZE                       (PAGE_OFFSET)
+#else
+#define TASK_SIZE                       __UL(0xFFFFFFFFUL)
+#endif
+
+/* base of area at which unspecified mmaps will start */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+#define TASK_UNMAPPED_BASE              __UL(16 * 1024 * 1024)
+#else
+#define TASK_UNMAPPED_BASE              __UL(TASK_SIZE / 3)
+#endif
+
+#endif /* _ASM_MEM_LAYOUT_H */
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h
new file mode 100644
index 000000000000..b4371e928683
--- /dev/null
+++ b/arch/frv/include/asm/mman.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN   0x0100          /* stack-like segment */
+#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
+#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
+#define MAP_LOCKED      0x2000          /* pages are locked */
+#define MAP_NORESERVE   0x4000          /* don't check for reservations */
+#define MAP_POPULATE    0x8000          /* populate (prefault) pagetables */
+#define MAP_NONBLOCK    0x10000         /* do not block on IO */
+
+#define MCL_CURRENT     1               /* lock all current mappings */
+#define MCL_FUTURE      2               /* lock all future mappings */
+
+#endif /* __ASM_MMAN_H__ */
+
diff --git a/arch/frv/include/asm/mmu.h b/arch/frv/include/asm/mmu.h
new file mode 100644
index 000000000000..86ca0e86e7d2
--- /dev/null
+++ b/arch/frv/include/asm/mmu.h
@@ -0,0 +1,41 @@
+/* mmu.h: memory management context for FR-V with or without MMU support
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+typedef struct {
+#ifdef CONFIG_MMU
+        struct list_head id_link;               /* link in list of context ID owners */
+        unsigned short  id;                     /* MMU context ID */
+        unsigned short  id_busy;                /* true if ID is in CXNR */
+        unsigned long   itlb_cached_pge;        /* [SCR0] PGE cached for insn TLB handler */
+        unsigned long   itlb_ptd_mapping;       /* [DAMR4] PTD mapping for itlb cached PGE */
+        unsigned long   dtlb_cached_pge;        /* [SCR1] PGE cached for data TLB handler */
+        unsigned long   dtlb_ptd_mapping;       /* [DAMR5] PTD mapping for dtlb cached PGE */
+
+#else
+        unsigned long           end_brk;
+
+#endif
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+        unsigned long   exec_fdpic_loadmap;
+        unsigned long   interp_fdpic_loadmap;
+#endif
+
+} mm_context_t;
+
+#ifdef CONFIG_MMU
+extern int __nongpreldata cxn_pinned;
+extern int cxn_pin_by_pid(pid_t pid);
+#endif
+
+#endif /* _ASM_MMU_H */
diff --git a/arch/frv/include/asm/mmu_context.h b/arch/frv/include/asm/mmu_context.h
new file mode 100644
index 000000000000..c7daa395156a
--- /dev/null
+++ b/arch/frv/include/asm/mmu_context.h
@@ -0,0 +1,50 @@
+/* mmu_context.h: MMU context management routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_MMU
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd);
+extern void destroy_context(struct mm_struct *mm);
+
+#else
+#define init_new_context(tsk, mm)               ({ 0; })
+#define change_mm_context(old, ctx, _pml4)      do {} while(0)
+#define destroy_context(mm)                     do {} while(0)
+#endif
+
+#define switch_mm(prev, next, tsk)                                              \
+do {                                                                            \
+        if (prev != next)                                                       \
+                change_mm_context(&prev->context, &next->context, next->pgd);   \
+} while(0)
+
+#define activate_mm(prev, next)                                         \
+do {                                                                    \
+        change_mm_context(&prev->context, &next->context, next->pgd);   \
+} while(0)
+
+#define deactivate_mm(tsk, mm)                  \
+do {                                            \
+} while(0)
+
+#endif
diff --git a/arch/frv/include/asm/module.h b/arch/frv/include/asm/module.h
new file mode 100644
index 000000000000..3d5c6360289a
--- /dev/null
+++ b/arch/frv/include/asm/module.h
@@ -0,0 +1,28 @@
+/* module.h: FRV module stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr        Elf32_Shdr
+#define Elf_Sym         Elf32_Sym
+#define Elf_Ehdr        Elf32_Ehdr
+
+/*
+ * Include the architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
+
diff --git a/arch/frv/include/asm/msgbuf.h b/arch/frv/include/asm/msgbuf.h
new file mode 100644
index 000000000000..97ceb55a06fb
--- /dev/null
+++ b/arch/frv/include/asm/msgbuf.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+        struct ipc64_perm       msg_perm;
+        __kernel_time_t         msg_stime;      /* last msgsnd time */
+        unsigned long           __unused1;
+        __kernel_time_t         msg_rtime;      /* last msgrcv time */
+        unsigned long           __unused2;
+        __kernel_time_t         msg_ctime;      /* last change time */
+        unsigned long           __unused3;
+        unsigned long           msg_cbytes;     /* current number of bytes on queue */
+        unsigned long           msg_qnum;       /* number of messages in queue */
+        unsigned long           msg_qbytes;     /* max number of bytes on queue */
+        __kernel_pid_t          msg_lspid;      /* pid of last msgsnd */
+        __kernel_pid_t          msg_lrpid;      /* last receive pid */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
+
diff --git a/arch/frv/include/asm/mutex.h b/arch/frv/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/frv/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h
new file mode 100644
index 000000000000..bd9c220094c7
--- /dev/null
+++ b/arch/frv/include/asm/page.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <asm/virtconvert.h>
+#include <asm/mem-layout.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)                    __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)              free_page(addr)
+
+#define clear_page(pgaddr)                      memset((pgaddr), 0, PAGE_SIZE)
+#define copy_page(to,from)                      memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(pgaddr, vaddr, page)    memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long  pte;    } pte_t;
+typedef struct { unsigned long  ste[64];} pmd_t;
+typedef struct { pmd_t          pue[1]; } pud_t;
+typedef struct { pud_t          pge[1]; } pgd_t;
+typedef struct { unsigned long  pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).ste[0])
+#define pud_val(x)      ((x).pue[0])
+#define pgd_val(x)      ((x).pge[0])
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pud(x)        ((pud_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+#define PTE_MASK        PAGE_MASK
+
+#define devmem_is_allowed(pfn)  1
+
+#define __pa(vaddr)             virt_to_phys((void *) (unsigned long) (vaddr))
+#define __va(paddr)             phys_to_virt((unsigned long) (paddr))
+
+#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#ifdef CONFIG_MMU
+#define pfn_valid(pfn)          ((pfn) < max_mapnr)
+#else
+#define ARCH_PFN_OFFSET         (PAGE_OFFSET >> PAGE_SHIFT)
+#define pfn_valid(pfn)          ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+
+#endif
+
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+
+#ifdef CONFIG_MMU
+#define VM_DATA_DEFAULT_FLAGS \
+        (VM_READ | VM_WRITE | \
+        ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/frv/include/asm/param.h b/arch/frv/include/asm/param.h
new file mode 100644
index 000000000000..6859dd503ed3
--- /dev/null
+++ b/arch/frv/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ              CONFIG_HZ       /* Internal kernel timer frequency */
+#define USER_HZ         100             /* .. some user interfaces are in "ticks" */
+#define CLOCKS_PER_SEC  (USER_HZ)       /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE   16384
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN          64      /* max length of hostname */
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
new file mode 100644
index 000000000000..585d9b49949a
--- /dev/null
+++ b/arch/frv/include/asm/pci.h
@@ -0,0 +1,118 @@
+/* pci.h: FR-V specific PCI declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68k/pci.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef ASM_PCI_H
+#define ASM_PCI_H
+
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
+
+struct pci_dev;
+
+#define pcibios_assign_all_busses()     0
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern void pcibios_penalize_isa_irq(int irq);
+
+#ifdef CONFIG_MMU
+extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle);
+extern void consistent_free(void *vaddr);
+extern void consistent_sync(void *vaddr, size_t size, int direction);
+extern void consistent_sync_page(struct page *page, unsigned long offset,
+                                 size_t size, int direction);
+#endif
+
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+                                  dma_addr_t *dma_handle);
+
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+                                void *vaddr, dma_addr_t dma_handle);
+
+/* Return the index of the PCI controller for device PDEV. */
+#define pci_controller_num(PDEV)        (0)
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)          (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)            (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)   do { } while (0)
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+                                        enum pci_dma_burst_strategy *strat,
+                                        unsigned long *strategy_parameter)
+{
+        *strat = PCI_DMA_BURST_INFINITY;
+        *strategy_parameter = ~0UL;
+}
+#endif
+
+/*
+ *      These are pretty much arbitary with the CoMEM implementation.
+ *      We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO          0x100
+#define PCIBIOS_MIN_MEM         0x00010000
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, the
+ * device again owns the buffer.
+ */
+static inline void pci_dma_sync_single(struct pci_dev *hwdev,
+                                       dma_addr_t dma_handle,
+                                       size_t size, int direction)
+{
+        if (direction == PCI_DMA_NONE)
+                BUG();
+
+        frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
+                            (unsigned long)bus_to_virt(dma_handle) + size);
+}
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
+                                   struct scatterlist *sg,
+                                   int nelems, int direction)
+{
+        int i;
+
+        if (direction == PCI_DMA_NONE)
+                BUG();
+
+        for (i = 0; i < nelems; i++)
+                frv_cache_wback_inv(sg_dma_address(&sg[i]),
+                                    sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
+}
+
+
+#endif
diff --git a/arch/frv/include/asm/percpu.h b/arch/frv/include/asm/percpu.h
new file mode 100644
index 000000000000..2cad3f874ded
--- /dev/null
+++ b/arch/frv/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif  /* __ASM_PERCPU_H */
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
new file mode 100644
index 000000000000..971e6addb009
--- /dev/null
+++ b/arch/frv/include/asm/pgalloc.h
@@ -0,0 +1,69 @@
+/* pgalloc.h: Page allocation routines for FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *      include/asm-m68knommu/pgalloc.h
+ *      include/asm-i386/pgalloc.h
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+#ifdef CONFIG_MMU
+
+#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE)
+#define pmd_populate(MM, PMD, PAGE)                                             \
+do {                                                                            \
+        __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE);        \
+} while(0)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+        free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+        pgtable_page_dtor(pte);
+        __free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte)                         \
+do {                                                    \
+        pgtable_page_dtor(pte);                         \
+        tlb_remove_page((tlb),(pte));                   \
+} while (0)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ * (In the PAE case we free the pmds as part of the pgd.)
+ */
+#define pmd_alloc_one(mm, addr)         ({ BUG(); ((pmd_t *) 2); })
+#define pmd_free(mm, x)                 do { } while (0)
+#define __pmd_free_tlb(tlb,x)           do { } while (0)
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
new file mode 100644
index 000000000000..33233011b1c1
--- /dev/null
+++ b/arch/frv/include/asm/pgtable.h
@@ -0,0 +1,549 @@
+/* pgtable.h: FR-V page table mangling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ *      include/asm-m68knommu/pgtable.h
+ *      include/asm-i386/pgtable.h
+ */
+
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/mem-layout.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+struct vm_area_struct;
+#endif
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_HIGHPTE)
+typedef unsigned long pte_addr_t;
+#else
+typedef pte_t *pte_addr_t;
+#endif
+#endif
+
+/*****************************************************************************/
+/*
+ * MMU-less operation case first
+ */
+#ifndef CONFIG_MMU
+
+#define pgd_present(pgd)        (1)             /* pages are always present on NO_MM */
+#define pgd_none(pgd)           (0)
+#define pgd_bad(pgd)            (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)   (1)
+#define pmd_offset(a, b)        ((void *) 0)
+
+#define PAGE_NONE               __pgprot(0)     /* these mean nothing to NO_MM */
+#define PAGE_SHARED             __pgprot(0)     /* these mean nothing to NO_MM */
+#define PAGE_COPY               __pgprot(0)     /* these mean nothing to NO_MM */
+#define PAGE_READONLY           __pgprot(0)     /* these mean nothing to NO_MM */
+#define PAGE_KERNEL             __pgprot(0)     /* these mean nothing to NO_MM */
+
+#define __swp_type(x)           (0)
+#define __swp_offset(x)         (0)
+#define __swp_entry(typ,off)    ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)   ((pte_t) { (x).val })
+
+#ifndef __ASSEMBLY__
+static inline int pte_file(pte_t pte) { return 0; }
+#endif
+
+#define ZERO_PAGE(vaddr)        ({ BUG(); NULL; })
+
+#define swapper_pg_dir          ((pgd_t *) NULL)
+
+#define pgtable_cache_init()            do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
+#else /* !CONFIG_MMU */
+/*****************************************************************************/
+/*
+ * then MMU operation
+ */
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long empty_zero_page;
+#define ZERO_PAGE(vaddr)        virt_to_page(empty_zero_page)
+#endif
+
+/*
+ * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry)
+ * [see Documentation/frv/mmu-layout.txt]
+ *
+ * Page Directory:
+ *  - Size: 16KB
+ *  - 64 PGEs per PGD
+ *  - Each PGE holds 1 PUD and covers 64MB
+ *
+ * Page Upper Directory:
+ *  - Size: 256B
+ *  - 1 PUE per PUD
+ *  - Each PUE holds 1 PMD and covers 64MB
+ *
+ * Page Mid-Level Directory
+ *  - Size: 256B
+ *  - 1 PME per PMD
+ *  - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table
+ *  - All STEs are instantiated at the same time
+ *
+ * Page Table
+ *  - Size: 16KB
+ *  - 4096 PTEs per PT
+ *  - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries
+ *
+ * Pages
+ *  - Size: 4KB
+ *
+ * total PTEs
+ *      = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs
+ *      = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT
+ *      = 262144 (or 256 * 1024)
+ */
+#define PGDIR_SHIFT             26
+#define PGDIR_SIZE              (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK              (~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD            64
+
+#define PUD_SHIFT               26
+#define PTRS_PER_PUD            1
+#define PUD_SIZE                (1UL << PUD_SHIFT)
+#define PUD_MASK                (~(PUD_SIZE - 1))
+#define PUE_SIZE                256
+
+#define PMD_SHIFT               26
+#define PMD_SIZE                (1UL << PMD_SHIFT)
+#define PMD_MASK                (~(PMD_SIZE - 1))
+#define PTRS_PER_PMD            1
+#define PME_SIZE                256
+
+#define __frv_PT_SIZE           256
+
+#define PTRS_PER_PTE            4096
+
+#define USER_PGDS_IN_LAST_PML4  (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS      0
+
+#define USER_PGD_PTRS           (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS         (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT    26
+#define BOOT_USER_PGD_PTRS      (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS    (PTRS_PER_PGD - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte)
+#define pmd_ERROR(e) \
+        printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pud_ERROR(e) \
+        printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e)))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e))))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                         \
+do {                                                    \
+        *(pteptr) = (pteval);                           \
+        asm volatile("dcf %M0" :: "U"(*pteptr));        \
+} while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pud is never bad, and a pud always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)           { return 0; }
+static inline int pgd_bad(pgd_t pgd)            { return 0; }
+static inline int pgd_present(pgd_t pgd)        { return 1; }
+static inline void pgd_clear(pgd_t *pgd)        { }
+
+#define pgd_populate(mm, pgd, pud)              do { } while (0)
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pgd(pgdptr, pgdval)                         \
+do {                                                    \
+        memcpy((pgdptr), &(pgdval), sizeof(pgd_t));     \
+        asm volatile("dcf %M0" :: "U"(*(pgdptr)));      \
+} while(0)
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+        return (pud_t *) pgd;
+}
+
+#define pgd_page(pgd)                           (pud_page((pud_t){ pgd }))
+#define pgd_page_vaddr(pgd)                     (pud_page_vaddr((pud_t){ pgd }))
+
+/*
+ * allocating and freeing a pud is trivial: the 1-entry pud is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pud_alloc_one(mm, address)              NULL
+#define pud_free(mm, x)                         do { } while (0)
+#define __pud_free_tlb(tlb, x)                  do { } while (0)
+
+/*
+ * The "pud_xxx()" functions here are trivial for a folded two-level
+ * setup: the pmd is never bad, and a pmd always exists (as it's folded
+ * into the pud entry)
+ */
+static inline int pud_none(pud_t pud)           { return 0; }
+static inline int pud_bad(pud_t pud)            { return 0; }
+static inline int pud_present(pud_t pud)        { return 1; }
+static inline void pud_clear(pud_t *pud)        { }
+
+#define pud_populate(mm, pmd, pte)              do { } while (0)
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval)                 set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
+
+#define pud_page(pud)                           (pmd_page((pmd_t){ pud }))
+#define pud_page_vaddr(pud)                     (pmd_page_vaddr((pmd_t){ pud }))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd);
+
+#define set_pmd(pmdptr, pmdval)                 \
+do {                                            \
+        __set_pmd((pmdptr), (pmdval).ste[0]);   \
+} while(0)
+
+#define __pmd_index(address)                    0
+
+static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address)
+{
+        return (pmd_t *) dir + __pmd_index(address);
+}
+
+#define pte_same(a, b)          ((a).pte == (b).pte)
+#define pte_page(x)             (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT))))
+#define pte_none(x)             (!(x).pte)
+#define pte_pfn(x)              ((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)      __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)      __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define VMALLOC_VMADDR(x)       ((unsigned long) (x))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * control flags in AMPR registers and TLB entries
+ */
+#define _PAGE_BIT_PRESENT       xAMPRx_V_BIT
+#define _PAGE_BIT_WP            DAMPRx_WP_BIT
+#define _PAGE_BIT_NOCACHE       xAMPRx_C_BIT
+#define _PAGE_BIT_SUPER         xAMPRx_S_BIT
+#define _PAGE_BIT_ACCESSED      xAMPRx_RESERVED8_BIT
+#define _PAGE_BIT_DIRTY         xAMPRx_M_BIT
+#define _PAGE_BIT_NOTGLOBAL     xAMPRx_NG_BIT
+
+#define _PAGE_PRESENT           xAMPRx_V
+#define _PAGE_WP                DAMPRx_WP
+#define _PAGE_NOCACHE           xAMPRx_C
+#define _PAGE_SUPER             xAMPRx_S
+#define _PAGE_ACCESSED          xAMPRx_RESERVED8        /* accessed if set */
+#define _PAGE_DIRTY             xAMPRx_M
+#define _PAGE_NOTGLOBAL         xAMPRx_NG
+
+#define _PAGE_RESERVED_MASK     (xAMPRx_RESERVED8 | xAMPRx_RESERVED13)
+
+#define _PAGE_FILE              0x002   /* set:pagecache unset:swap */
+#define _PAGE_PROTNONE          0x000   /* If not present */
+
+#define _PAGE_CHG_MASK          (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PGPROT_BASE \
+        (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED)
+
+#define PAGE_NONE       __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED     __pgprot(__PGPROT_BASE)
+#define PAGE_COPY       __pgprot(__PGPROT_BASE | _PAGE_WP)
+#define PAGE_READONLY   __pgprot(__PGPROT_BASE | _PAGE_WP)
+
+#define __PAGE_KERNEL           (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY)
+#define __PAGE_KERNEL_NOCACHE   (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE)
+#define __PAGE_KERNEL_RO        (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP)
+
+#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL)
+
+#define PAGE_KERNEL             MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO          MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE     MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+
+#define _PAGE_TABLE             (_PAGE_PRESENT | xAMPRx_SS_16Kb)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The FR451 can do execute protection by virtue of having separate TLB miss handlers for
+ * instruction access and for data access. However, we don't have enough reserved bits to say
+ * "execute only", so we don't bother. If you can read it, you can execute it and vice versa.
+ */
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  PAGE_COPY
+#define __P011  PAGE_COPY
+#define __P100  PAGE_READONLY
+#define __P101  PAGE_READONLY
+#define __P110  PAGE_COPY
+#define __P111  PAGE_COPY
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_SHARED
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_READONLY
+#define __S101  PAGE_READONLY
+#define __S110  PAGE_SHARED
+#define __S111  PAGE_SHARED
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'access_ok(VERIFY_WRITE,..)'
+ */
+#undef TEST_ACCESS_OK
+
+#define pte_present(x)  (pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)   do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)     (!pmd_val(x))
+#define pmd_present(x)  (pmd_val(x) & _PAGE_PRESENT)
+#define pmd_bad(x)      (pmd_val(x) & xAMPRx_SS)
+#define pmd_clear(xp)   do { __set_pmd(xp, 0); } while(0)
+
+#define pmd_page_vaddr(pmd) \
+        ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd)   (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#endif
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte)          { return (pte).pte & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)          { return (pte).pte & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)          { return !((pte).pte & _PAGE_WP); }
+static inline int pte_special(pte_t pte)        { return 0; }
+
+static inline pte_t pte_mkclean(pte_t pte)      { (pte).pte &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)        { (pte).pte &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)    { (pte).pte |= _PAGE_WP; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)      { (pte).pte |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)      { (pte).pte |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)      { (pte).pte &= ~_PAGE_WP; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)    { return pte; }
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+        int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+        asm volatile("dcf %M0" :: "U"(*ptep));
+        return i;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+        unsigned long x = xchg(&ptep->pte, 0);
+        asm volatile("dcf %M0" :: "U"(*ptep));
+        return __pte(x);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+        set_bit(_PAGE_BIT_WP, ptep);
+        asm volatile("dcf %M0" :: "U"(*ptep));
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable"
+ */
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry)      ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot)   pfn_pte((physpage) >> PAGE_SHIFT, pgprot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        pte.pte &= _PAGE_CHG_MASK;
+        pte.pte |= pgprot_val(newprot);
+        return pte;
+}
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_index_k(addr) pgd_index(addr)
+
+/* Find an entry in the bottom-level page table.. */
+#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+                (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+        ((pte_t *) pmd_page_vaddr(*(dir)) +  pte_index(address))
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address) \
+        ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
+#define pte_offset_map_nested(dir, address) \
+        ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
+#else
+#define pte_offset_map(dir, address) \
+        ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/*
+ * Handle swap and file entries
+ * - the PTE is encoded in the following format:
+ *      bit 0:          Must be 0 (!_PAGE_PRESENT)
+ *      bit 1:          Type: 0 for swap, 1 for file (_PAGE_FILE)
+ *      bits 2-7:       Swap type
+ *      bits 8-31:      Swap offset
+ *      bits 2-31:      File pgoff
+ */
+#define __swp_type(x)                   (((x).val >> 2) & 0x1f)
+#define __swp_offset(x)                 ((x).val >> 8)
+#define __swp_entry(type, offset)       ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(_pte)        ((swp_entry_t) { (_pte).pte })
+#define __swp_entry_to_pte(x)           ((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+        return pte.pte & _PAGE_FILE;
+}
+
+#define PTE_FILE_MAX_BITS       29
+
+#define pte_to_pgoff(PTE)       ((PTE).pte >> 2)
+#define pgoff_to_pte(off)       __pte((off) << 2 | _PAGE_FILE)
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define PageSkip(page)          (0)
+#define kern_addr_valid(addr)   (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)         \
+                remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+/*
+ * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+        struct mm_struct *mm;
+        unsigned long ampr;
+
+        mm = current->mm;
+        if (mm) {
+                pgd_t *pge = pgd_offset(mm, address);
+                pud_t *pue = pud_offset(pge, address);
+                pmd_t *pme = pmd_offset(pue, address);
+
+                ampr = pme->ste[0] & 0xffffff00;
+                ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
+                        xAMPRx_V;
+        } else {
+                address = ULONG_MAX;
+                ampr = 0;
+        }
+
+        asm volatile("movgs %0,scr0\n"
+                     "movgs %0,scr1\n"
+                     "movgs %1,dampr4\n"
+                     "movgs %1,dampr5\n"
+                     :
+                     : "r"(address), "r"(ampr)
+                     );
+}
+
+#ifdef CONFIG_PROC_FS
+extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer);
+#endif
+
+extern void __init pgtable_cache_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_MMU */
+
+#ifndef __ASSEMBLY__
+extern void __init paging_init(void);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/frv/include/asm/poll.h b/arch/frv/include/asm/poll.h
new file mode 100644
index 000000000000..0d01479ccc56
--- /dev/null
+++ b/arch/frv/include/asm/poll.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POLL_H
+#define _ASM_POLL_H
+
+#define POLLWRNORM      POLLOUT
+#define POLLWRBAND      256
+
+#include <asm-generic/poll.h>
+
+#undef POLLREMOVE
+
+#endif
+
diff --git a/arch/frv/include/asm/posix_types.h b/arch/frv/include/asm/posix_types.h
new file mode 100644
index 000000000000..a9f1f5be0632
--- /dev/null
+++ b/arch/frv/include/asm/posix_types.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef unsigned int    __kernel_size_t;
+typedef int             __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short  __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+        int     val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef  __FD_SET
+#define __FD_SET(d, set)        ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef  __FD_CLR
+#define __FD_CLR(d, set)        ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef  __FD_ISSET
+#define __FD_ISSET(d, set)      (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
+
+#undef  __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) */
+
+#endif
+
diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h
new file mode 100644
index 000000000000..3744f2e47f48
--- /dev/null
+++ b/arch/frv/include/asm/processor.h
@@ -0,0 +1,153 @@
+/* processor.h: FRV processor definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/registers.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/cache.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ */
+struct cpuinfo_frv {
+#ifdef CONFIG_MMU
+        unsigned long   *pgd_quick;
+        unsigned long   *pte_quick;
+        unsigned long   pgtable_cache_sz;
+#endif
+} __cacheline_aligned;
+
+extern struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+#define cpu_data                (&boot_cpu_data)
+#define current_cpu_data        boot_cpu_data
+
+/*
+ * Bus types
+ */
+#define EISA_bus 0
+#define MCA_bus 0
+
+struct thread_struct {
+        struct pt_regs          *frame;         /* [GR28] exception frame ptr for this thread */
+        struct task_struct      *curr;          /* [GR29] current pointer for this thread */
+        unsigned long           sp;             /* [GR1 ] kernel stack pointer */
+        unsigned long           fp;             /* [GR2 ] kernel frame pointer */
+        unsigned long           lr;             /* link register */
+        unsigned long           pc;             /* program counter */
+        unsigned long           gr[12];         /* [GR16-GR27] */
+        unsigned long           sched_lr;       /* LR from schedule() */
+
+        union {
+                struct pt_regs          *frame0;        /* top (user) stack frame */
+                struct user_context     *user;          /* userspace context */
+        };
+} __attribute__((aligned(8)));
+
+extern struct pt_regs *__kernel_frame0_ptr;
+extern struct task_struct *__kernel_current_task;
+
+#endif
+
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_FRAME0 \
+        ((struct pt_regs *) \
+        (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context)))
+
+#define INIT_THREAD {                           \
+        NULL,                                   \
+        (struct task_struct *) init_stack,      \
+        0, 0, 0, 0,                             \
+        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
+        0,                                      \
+        { INIT_THREAD_FRAME0 },                 \
+}
+
+/*
+ * do necessary setup to start up a newly executed thread.
+ * - need to discard the frame stacked by init() invoking the execve syscall
+ */
+#define start_thread(_regs, _pc, _usp)                  \
+do {                                                    \
+        set_fs(USER_DS); /* reads from user space */    \
+        __frame = __kernel_frame0_ptr;                  \
+        __frame->pc     = (_pc);                        \
+        __frame->psr    &= ~PSR_S;                      \
+        __frame->sp     = (_usp);                       \
+} while(0)
+
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+extern asmlinkage void save_user_regs(struct user_context *target);
+extern asmlinkage void *restore_user_regs(const struct user_context *target, ...);
+
+#define copy_segments(tsk, mm)          do { } while (0)
+#define release_segments(mm)            do { } while (0)
+#define forget_segments()               do { } while (0)
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)   ((tsk)->thread.frame0->pc)
+#define KSTK_ESP(tsk)   ((tsk)->thread.frame0->sp)
+
+/* Allocation and freeing of basic task resources. */
+extern struct task_struct *alloc_task_struct(void);
+extern void free_task_struct(struct task_struct *p);
+
+#define cpu_relax()    barrier()
+
+/* data cache prefetch */
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *x)
+{
+        asm volatile("dcpl %0,gr0,#0" : : "r"(x));
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
new file mode 100644
index 000000000000..cf6934012b64
--- /dev/null
+++ b/arch/frv/include/asm/ptrace.h
@@ -0,0 +1,83 @@
+/* ptrace.h: ptrace() relevant definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <asm/registers.h>
+#ifdef __KERNEL__
+#include <asm/irq_regs.h>
+
+#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
+#endif
+
+
+#define PT_PSR          0
+#define PT_ISR          1
+#define PT_CCR          2
+#define PT_CCCR         3
+#define PT_LR           4
+#define PT_LCR          5
+#define PT_PC           6
+
+#define PT__STATUS      7       /* exception status */
+#define PT_SYSCALLNO    8       /* syscall number or -1 */
+#define PT_ORIG_GR8     9       /* saved GR8 for signal handling */
+#define PT_GNER0        10
+#define PT_GNER1        11
+#define PT_IACC0H       12
+#define PT_IACC0L       13
+
+#define PT_GR(j)        ( 14 + (j))     /* GRj for 0<=j<=63 */
+#define PT_FR(j)        ( 78 + (j))     /* FRj for 0<=j<=63 */
+#define PT_FNER(j)      (142 + (j))     /* FNERj for 0<=j<=1 */
+#define PT_MSR(j)       (144 + (j))     /* MSRj for 0<=j<=2 */
+#define PT_ACC(j)       (146 + (j))     /* ACCj for 0<=j<=7 */
+#define PT_ACCG(jklm)   (154 + (jklm))  /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
+#define PT_FSR(j)       (156 + (j))     /* FSRj for 0<=j<=0 */
+#define PT__GPEND       78
+#define PT__END         157
+
+#define PT_TBR          PT_GR(0)
+#define PT_SP           PT_GR(1)
+#define PT_FP           PT_GR(2)
+#define PT_PREV_FRAME   PT_GR(28)       /* previous exception frame pointer (old gr28 value) */
+#define PT_CURR_TASK    PT_GR(29)       /* current task */
+
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS          12
+#define PTRACE_SETREGS          13
+#define PTRACE_GETFPREGS        14
+#define PTRACE_SETFPREGS        15
+#define PTRACE_GETFDPIC         31      /* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC    0       /* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP  1       /* [addr] request the interpreter loadmap */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/*
+ * we dedicate GR28 to keeping a pointer to the current exception frame
+ * - gr28 is destroyed on entry to the kernel from userspace
+ */
+register struct pt_regs *__frame asm("gr28");
+
+#define user_mode(regs)                 (!((regs)->psr & PSR_S))
+#define instruction_pointer(regs)       ((regs)->pc)
+
+extern unsigned long user_stack(const struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#define profile_pc(regs) ((regs)->pc)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/frv/include/asm/registers.h b/arch/frv/include/asm/registers.h
new file mode 100644
index 000000000000..9666119fcf6e
--- /dev/null
+++ b/arch/frv/include/asm/registers.h
@@ -0,0 +1,232 @@
+/* registers.h: register frame declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * notes:
+ *
+ * (1) that the members of all these structures are carefully aligned to permit
+ *     usage of STD/STDF instructions
+ *
+ * (2) if you change these structures, you must change the code in
+ *     arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c}
+ *
+ *
+ * the kernel stack space block looks like this:
+ *
+ *      +0x2000 +----------------------
+ *              | union {
+ *              |       struct frv_frame0 {
+ *              |               struct user_context {
+ *              |                       struct user_int_regs
+ *              |                       struct user_fpmedia_regs
+ *              |               }
+ *              |               struct frv_debug_regs
+ *              |       }
+ *              |       struct pt_regs [user exception]
+ *              | }
+ *              +---------------------- <-- __kernel_frame0_ptr (maybe GR28)
+ *              |
+ *              | kernel stack
+ *              |
+ *              |......................
+ *              | struct pt_regs [kernel exception]
+ *              |...................... <-- __kernel_frame0_ptr (maybe GR28)
+ *              |
+ *              | kernel stack
+ *              |
+ *              |...................... <-- stack pointer (GR1)
+ *              |
+ *              | unused stack space
+ *              |
+ *              +----------------------
+ *              | struct thread_info
+ *      +0x0000 +---------------------- <-- __current_thread_info (GR15);
+ *
+ * note that GR28 points to the current exception frame
+ */
+
+#ifndef _ASM_REGISTERS_H
+#define _ASM_REGISTERS_H
+
+#ifndef __ASSEMBLY__
+#define __OFFSET(X,N)   ((X)+(N)*4)
+#define __OFFSETC(X,N)  xxxxxxxxxxxxxxxxxxxxxxxx
+#else
+#define __OFFSET(X,N)   ((X)+(N)*4)
+#define __OFFSETC(X,N)  ((X)+(N))
+#endif
+
+/*****************************************************************************/
+/*
+ * Exception/Interrupt frame
+ * - held on kernel stack
+ * - 8-byte aligned on stack (old SP is saved in frame)
+ * - GR0 is fixed 0, so we don't save it
+ */
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+        unsigned long           psr;            /* Processor Status Register */
+        unsigned long           isr;            /* Integer Status Register */
+        unsigned long           ccr;            /* Condition Code Register */
+        unsigned long           cccr;           /* Condition Code for Conditional Insns Register */
+        unsigned long           lr;             /* Link Register */
+        unsigned long           lcr;            /* Loop Count Register */
+        unsigned long           pc;             /* Program Counter Register */
+        unsigned long           __status;       /* exception status */
+        unsigned long           syscallno;      /* syscall number or -1 */
+        unsigned long           orig_gr8;       /* original syscall arg #1 */
+        unsigned long           gner0;
+        unsigned long           gner1;
+        unsigned long long      iacc0;
+        unsigned long           tbr;            /* GR0 is fixed zero, so we use this for TBR */
+        unsigned long           sp;             /* GR1: USP/KSP */
+        unsigned long           fp;             /* GR2: FP */
+        unsigned long           gr3;
+        unsigned long           gr4;
+        unsigned long           gr5;
+        unsigned long           gr6;
+        unsigned long           gr7;            /* syscall number */
+        unsigned long           gr8;            /* 1st syscall param; syscall return */
+        unsigned long           gr9;            /* 2nd syscall param */
+        unsigned long           gr10;           /* 3rd syscall param */
+        unsigned long           gr11;           /* 4th syscall param */
+        unsigned long           gr12;           /* 5th syscall param */
+        unsigned long           gr13;           /* 6th syscall param */
+        unsigned long           gr14;
+        unsigned long           gr15;
+        unsigned long           gr16;           /* GP pointer */
+        unsigned long           gr17;           /* small data */
+        unsigned long           gr18;           /* PIC/PID */
+        unsigned long           gr19;
+        unsigned long           gr20;
+        unsigned long           gr21;
+        unsigned long           gr22;
+        unsigned long           gr23;
+        unsigned long           gr24;
+        unsigned long           gr25;
+        unsigned long           gr26;
+        unsigned long           gr27;
+        struct pt_regs          *next_frame;    /* GR28 - next exception frame */
+        unsigned long           gr29;           /* GR29 - OS reserved */
+        unsigned long           gr30;           /* GR30 - OS reserved */
+        unsigned long           gr31;           /* GR31 - OS reserved */
+} __attribute__((aligned(8)));
+
+#endif
+
+#define REG__STATUS_STEP        0x00000001      /* - reenable single stepping on return */
+#define REG__STATUS_STEPPED     0x00000002      /* - single step caused exception */
+#define REG__STATUS_BROKE       0x00000004      /* - BREAK insn caused exception */
+#define REG__STATUS_SYSC_ENTRY  0x40000000      /* - T on syscall entry (ptrace.c only) */
+#define REG__STATUS_SYSC_EXIT   0x80000000      /* - T on syscall exit (ptrace.c only) */
+
+#define REG_GR(R)       __OFFSET(REG_GR0, (R))
+
+#define REG_SP          REG_GR(1)
+#define REG_FP          REG_GR(2)
+#define REG_PREV_FRAME  REG_GR(28)      /* previous exception frame pointer (old gr28 value) */
+#define REG_CURR_TASK   REG_GR(29)      /* current task */
+
+/*****************************************************************************/
+/*
+ * debugging registers
+ */
+#ifndef __ASSEMBLY__
+
+struct frv_debug_regs
+{
+        unsigned long           dcr;
+        unsigned long           ibar[4] __attribute__((aligned(8)));
+        unsigned long           dbar[4] __attribute__((aligned(8)));
+        unsigned long           dbdr[4][4] __attribute__((aligned(8)));
+        unsigned long           dbmr[4][4] __attribute__((aligned(8)));
+} __attribute__((aligned(8)));
+
+#endif
+
+/*****************************************************************************/
+/*
+ * userspace registers
+ */
+#ifndef __ASSEMBLY__
+
+struct user_int_regs
+{
+        /* integer registers
+         * - up to gr[31] mirror pt_regs
+         * - total size must be multiple of 8 bytes
+         */
+        unsigned long           psr;            /* Processor Status Register */
+        unsigned long           isr;            /* Integer Status Register */
+        unsigned long           ccr;            /* Condition Code Register */
+        unsigned long           cccr;           /* Condition Code for Conditional Insns Register */
+        unsigned long           lr;             /* Link Register */
+        unsigned long           lcr;            /* Loop Count Register */
+        unsigned long           pc;             /* Program Counter Register */
+        unsigned long           __status;       /* exception status */
+        unsigned long           syscallno;      /* syscall number or -1 */
+        unsigned long           orig_gr8;       /* original syscall arg #1 */
+        unsigned long           gner[2];
+        unsigned long long      iacc[1];
+
+        union {
+                unsigned long   tbr;
+                unsigned long   gr[64];
+        };
+};
+
+struct user_fpmedia_regs
+{
+        /* FP/Media registers */
+        unsigned long   fr[64];
+        unsigned long   fner[2];
+        unsigned long   msr[2];
+        unsigned long   acc[8];
+        unsigned char   accg[8];
+        unsigned long   fsr[1];
+};
+
+struct user_context
+{
+        struct user_int_regs            i;
+        struct user_fpmedia_regs        f;
+
+        /* we provide a context extension so that we can save the regs for CPUs that
+         * implement many more of Fujitsu's lavish register spec
+         */
+        void *extension;
+} __attribute__((aligned(8)));
+
+struct frv_frame0 {
+        union {
+                struct pt_regs          regs;
+                struct user_context     uc;
+        };
+
+        struct frv_debug_regs           debug;
+
+} __attribute__((aligned(32)));
+
+#endif
+
+#define __INT_GR(R)             __OFFSET(__INT_GR0,             (R))
+
+#define __FPMEDIA_FR(R)         __OFFSET(__FPMEDIA_FR0,         (R))
+#define __FPMEDIA_FNER(R)       __OFFSET(__FPMEDIA_FNER0,       (R))
+#define __FPMEDIA_MSR(R)        __OFFSET(__FPMEDIA_MSR0,        (R))
+#define __FPMEDIA_ACC(R)        __OFFSET(__FPMEDIA_ACC0,        (R))
+#define __FPMEDIA_ACCG(R)       __OFFSETC(__FPMEDIA_ACCG0,      (R))
+#define __FPMEDIA_FSR(R)        __OFFSET(__FPMEDIA_FSR0,        (R))
+
+#define __THREAD_GR(R)          __OFFSET(__THREAD_GR16,         (R) - 16)
+
+#endif /* _ASM_REGISTERS_H */
diff --git a/arch/frv/include/asm/resource.h b/arch/frv/include/asm/resource.h
new file mode 100644
index 000000000000..5fc60548fd02
--- /dev/null
+++ b/arch/frv/include/asm/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
+
diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h
new file mode 100644
index 000000000000..4bca8a28546c
--- /dev/null
+++ b/arch/frv/include/asm/scatterlist.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_buf(sg, some_ptr, length);
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long   sg_magic;
+#endif
+        unsigned long   page_link;
+        unsigned int    offset;         /* for highmem, page offset */
+
+        dma_addr_t      dma_address;
+        unsigned int    length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffffUL)
+
+#endif /* !_ASM_SCATTERLIST_H */
diff --git a/arch/frv/include/asm/sections.h b/arch/frv/include/asm/sections.h
new file mode 100644
index 000000000000..17d0fb171bba
--- /dev/null
+++ b/arch/frv/include/asm/sections.h
@@ -0,0 +1,46 @@
+/* sections.h: linkage layout variables
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm-generic/sections.h>
+
+#ifdef __KERNEL__
+
+/*
+ * we don't want to put variables in the GP-REL section if they're not used very much - that would
+ * be waste since GP-REL addressing is limited to GP16+/-2048
+ */
+#define __nongpreldata  __attribute__((section(".data")))
+#define __nongprelbss   __attribute__((section(".bss")))
+
+/*
+ * linker symbols
+ */
+extern const void __kernel_image_start, __kernel_image_end, __page_offset;
+
+extern unsigned long __nongprelbss memory_start;
+extern unsigned long __nongprelbss memory_end;
+extern unsigned long __nongprelbss rom_length;
+
+/* determine if we're running from ROM */
+static inline int is_in_rom(unsigned long addr)
+{
+        return 0; /* default case: not in ROM */
+}
+
+#endif
+#endif
+#endif /* _ASM_SECTIONS_H */
diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h
new file mode 100644
index 000000000000..e3616a6f941d
--- /dev/null
+++ b/arch/frv/include/asm/segment.h
@@ -0,0 +1,45 @@
+/* segment.h: MMU segment settings
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#define KERNEL_DS               MAKE_MM_SEG(0xdfffffffUL)
+
+#ifdef CONFIG_MMU
+#define USER_DS                 MAKE_MM_SEG(TASK_SIZE - 1)
+#else
+#define USER_DS                 KERNEL_DS
+#endif
+
+#define get_ds()                (KERNEL_DS)
+#define get_fs()                (__current_thread_info->addr_limit)
+#define segment_eq(a,b)         ((a).seg == (b).seg)
+#define __kernel_ds_p()         segment_eq(get_fs(), KERNEL_DS)
+#define get_addr_limit()        (get_fs().seg)
+
+#define set_fs(_x)                                      \
+do {                                                    \
+        __current_thread_info->addr_limit = (_x);       \
+} while(0)
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_SEGMENT_H */
diff --git a/arch/frv/include/asm/sembuf.h b/arch/frv/include/asm/sembuf.h
new file mode 100644
index 000000000000..164b12786d6d
--- /dev/null
+++ b/arch/frv/include/asm/sembuf.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+        struct ipc64_perm       sem_perm;       /* permissions .. see ipc.h */
+        __kernel_time_t         sem_otime;      /* last semop time */
+        unsigned long           __unused1;
+        __kernel_time_t         sem_ctime;      /* last change time */
+        unsigned long           __unused2;
+        unsigned long           sem_nsems;      /* no. of semaphores in array */
+        unsigned long           __unused3;
+        unsigned long           __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
+
diff --git a/arch/frv/include/asm/serial-regs.h b/arch/frv/include/asm/serial-regs.h
new file mode 100644
index 000000000000..e1286bda00eb
--- /dev/null
+++ b/arch/frv/include/asm/serial-regs.h
@@ -0,0 +1,44 @@
+/* serial-regs.h: serial port registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <linux/serial_reg.h>
+#include <asm/irc-regs.h>
+
+#define SERIAL_ICLK     33333333        /* the target serial input clock */
+#define UART0_BASE      0xfeff9c00
+#define UART1_BASE      0xfeff9c40
+
+#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; })
+#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; })
+#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0)
+#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0)
+
+#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); })
+#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); })
+
+#define __set_UART0_IER(V) __set_UART0(UART_IER,(V))
+#define __set_UART1_IER(V) __set_UART1(UART_IER,(V))
+
+/* serial prescaler select register */
+#define __get_UCPSR()   ({ *(volatile unsigned long *)(0xfeff9c90); })
+#define __set_UCPSR(V)  do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0)
+#define UCPSR_SELECT0   0x07000000
+#define UCPSR_SELECT1   0x38000000
+
+/* serial prescaler base value register */
+#define __get_UCPVR()   ({ *(volatile unsigned long *)(0xfeff9c98); mb(); })
+#define __set_UCPVR(V)  do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0)
+
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h
new file mode 100644
index 000000000000..dbb825998689
--- /dev/null
+++ b/arch/frv/include/asm/serial.h
@@ -0,0 +1,18 @@
+/*
+ * serial.h
+ *
+ * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/)
+ * Author: Bernardo Innocenti <bernie@codewiz.org>
+ *
+ * Based on linux/include/asm-i386/serial.h
+ */
+#include <asm/serial-regs.h>
+
+/*
+ * the base baud is derived from the clock speed and so is variable
+ */
+#define BASE_BAUD 0
+
+#define STD_COM_FLAGS           ASYNC_BOOT_AUTOCONF
+
+#define SERIAL_PORT_DFNS
diff --git a/arch/frv/include/asm/setup.h b/arch/frv/include/asm/setup.h
new file mode 100644
index 000000000000..afd787ceede6
--- /dev/null
+++ b/arch/frv/include/asm/setup.h
@@ -0,0 +1,31 @@
+/* setup.h: setup stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+#define COMMAND_LINE_SIZE       512
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
+extern unsigned long __initdata num_mappedpages;
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif  /*  __KERNEL__  */
+
+#endif /* _ASM_SETUP_H */
diff --git a/arch/frv/include/asm/shmbuf.h b/arch/frv/include/asm/shmbuf.h
new file mode 100644
index 000000000000..4c6e711a4779
--- /dev/null
+++ b/arch/frv/include/asm/shmbuf.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+        struct ipc64_perm       shm_perm;       /* operation perms */
+        size_t                  shm_segsz;      /* size of segment (bytes) */
+        __kernel_time_t         shm_atime;      /* last attach time */
+        unsigned long           __unused1;
+        __kernel_time_t         shm_dtime;      /* last detach time */
+        unsigned long           __unused2;
+        __kernel_time_t         shm_ctime;      /* last change time */
+        unsigned long           __unused3;
+        __kernel_pid_t          shm_cpid;       /* pid of creator */
+        __kernel_pid_t          shm_lpid;       /* pid of last operator */
+        unsigned long           shm_nattch;     /* no. of current attaches */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+
+struct shminfo64 {
+        unsigned long   shmmax;
+        unsigned long   shmmin;
+        unsigned long   shmmni;
+        unsigned long   shmseg;
+        unsigned long   shmall;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
+
diff --git a/arch/frv/include/asm/shmparam.h b/arch/frv/include/asm/shmparam.h
new file mode 100644
index 000000000000..ab711009cfaa
--- /dev/null
+++ b/arch/frv/include/asm/shmparam.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
+
diff --git a/arch/frv/include/asm/sigcontext.h b/arch/frv/include/asm/sigcontext.h
new file mode 100644
index 000000000000..3b263f3cc96f
--- /dev/null
+++ b/arch/frv/include/asm/sigcontext.h
@@ -0,0 +1,26 @@
+/* sigcontext.h: FRV signal context
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/registers.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+        struct user_context     sc_context;
+        unsigned long           sc_oldmask;     /* old sigmask */
+} __attribute__((aligned(8)));
+
+#endif
diff --git a/arch/frv/include/asm/siginfo.h b/arch/frv/include/asm/siginfo.h
new file mode 100644
index 000000000000..d3fd1ca45653
--- /dev/null
+++ b/arch/frv/include/asm/siginfo.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define FPE_MDAOVF      (__SI_FAULT|9)  /* media overflow */
+#undef NSIGFPE
+#define NSIGFPE         9
+
+#endif
+
diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h
new file mode 100644
index 000000000000..2079197d483d
--- /dev/null
+++ b/arch/frv/include/asm/signal.h
@@ -0,0 +1,161 @@
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG           64
+#define _NSIG_BPW       32
+#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS          31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002 /* not supported yet */
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+#define SA_RESTORER     0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void __user *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/frv/include/asm/smp.h b/arch/frv/include/asm/smp.h
new file mode 100644
index 000000000000..38349ec8b61b
--- /dev/null
+++ b/arch/frv/include/asm/smp.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#endif
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
new file mode 100644
index 000000000000..57c3d4054e8b
--- /dev/null
+++ b/arch/frv/include/asm/socket.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET      1
+
+#define SO_DEBUG        1
+#define SO_REUSEADDR    2
+#define SO_TYPE         3
+#define SO_ERROR        4
+#define SO_DONTROUTE    5
+#define SO_BROADCAST    6
+#define SO_SNDBUF       7
+#define SO_RCVBUF       8
+#define SO_SNDBUFFORCE  32
+#define SO_RCVBUFFORCE  33
+#define SO_KEEPALIVE    9
+#define SO_OOBINLINE    10
+#define SO_NO_CHECK     11
+#define SO_PRIORITY     12
+#define SO_LINGER       13
+#define SO_BSDCOMPAT    14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED     16
+#define SO_PEERCRED     17
+#define SO_RCVLOWAT     18
+#define SO_SNDLOWAT     19
+#define SO_RCVTIMEO     20
+#define SO_SNDTIMEO     21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION              22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
+#define SO_SECURITY_ENCRYPTION_NETWORK          24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP            29
+#define SCM_TIMESTAMP           SO_TIMESTAMP
+
+#define SO_ACCEPTCONN           30
+
+#define SO_PEERSEC              31
+#define SO_PASSSEC              34
+#define SO_TIMESTAMPNS          35
+#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
+
+#define SO_MARK                 36
+
+#define SO_TIMESTAMPING         37
+#define SCM_TIMESTAMPING        SO_TIMESTAMPING
+
+#endif /* _ASM_SOCKET_H */
+
diff --git a/arch/frv/include/asm/sockios.h b/arch/frv/include/asm/sockios.h
new file mode 100644
index 000000000000..5dbdd13e6de3
--- /dev/null
+++ b/arch/frv/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SOCKIOS__
+#define _ASM_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN       0x8901
+#define SIOCSPGRP       0x8902
+#define FIOGETOWN       0x8903
+#define SIOCGPGRP       0x8904
+#define SIOCATMARK      0x8905
+#define SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
+#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS__ */
+
diff --git a/arch/frv/include/asm/spinlock.h b/arch/frv/include/asm/spinlock.h
new file mode 100644
index 000000000000..fe385f45d1fd
--- /dev/null
+++ b/arch/frv/include/asm/spinlock.h
@@ -0,0 +1,17 @@
+/* spinlock.h: spinlocks for FR-V
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error no spinlocks for FR-V yet
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h
new file mode 100644
index 000000000000..01e6af5e99b8
--- /dev/null
+++ b/arch/frv/include/asm/spr-regs.h
@@ -0,0 +1,416 @@
+/* spr-regs.h: special-purpose registers on the FRV
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPR_REGS_H
+#define _ASM_SPR_REGS_H
+
+/*
+ * PSR - Processor Status Register
+ */
+#define PSR_ET                  0x00000001      /* enable interrupts/exceptions flag */
+#define PSR_PS                  0x00000002      /* previous supervisor mode flag */
+#define PSR_S                   0x00000004      /* supervisor mode flag */
+#define PSR_PIL                 0x00000078      /* processor external interrupt level */
+#define PSR_PIL_0               0x00000000      /* - no interrupt in progress */
+#define PSR_PIL_13              0x00000068      /* - debugging only */
+#define PSR_PIL_14              0x00000070      /* - debugging in progress */
+#define PSR_PIL_15              0x00000078      /* - NMI in progress */
+#define PSR_EM                  0x00000080      /* enable media operation */
+#define PSR_EF                  0x00000100      /* enable FPU operation */
+#define PSR_BE                  0x00001000      /* endianness mode */
+#define PSR_BE_LE               0x00000000      /* - little endian mode */
+#define PSR_BE_BE               0x00001000      /* - big endian mode */
+#define PSR_CM                  0x00002000      /* conditional mode */
+#define PSR_NEM                 0x00004000      /* non-excepting mode */
+#define PSR_ICE                 0x00010000      /* in-circuit emulation mode */
+#define PSR_VERSION_SHIFT       24              /* CPU silicon ID */
+#define PSR_IMPLE_SHIFT         28              /* CPU core ID */
+
+#define PSR_VERSION(psr)        (((psr) >> PSR_VERSION_SHIFT) & 0xf)
+#define PSR_IMPLE(psr)          (((psr) >> PSR_IMPLE_SHIFT) & 0xf)
+
+#define PSR_IMPLE_FR401         0x2
+#define PSR_VERSION_FR401_MB93401       0x0
+#define PSR_VERSION_FR401_MB93401A      0x1
+#define PSR_VERSION_FR401_MB93403       0x2
+
+#define PSR_IMPLE_FR405         0x4
+#define PSR_VERSION_FR405_MB93405       0x0
+
+#define PSR_IMPLE_FR451         0x5
+#define PSR_VERSION_FR451_MB93451       0x0
+
+#define PSR_IMPLE_FR501         0x1
+#define PSR_VERSION_FR501_MB93501       0x1
+#define PSR_VERSION_FR501_MB93501A      0x2
+
+#define PSR_IMPLE_FR551         0x3
+#define PSR_VERSION_FR551_MB93555       0x1
+
+#define __get_PSR()     ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; })
+#define __set_PSR(V)    do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0)
+
+/*
+ * TBR - Trap Base Register
+ */
+#define TBR_TT                  0x00000ff0
+#define TBR_TT_INSTR_MMU_MISS   (0x01 << 4)
+#define TBR_TT_INSTR_ACC_ERROR  (0x02 << 4)
+#define TBR_TT_INSTR_ACC_EXCEP  (0x03 << 4)
+#define TBR_TT_PRIV_INSTR       (0x06 << 4)
+#define TBR_TT_ILLEGAL_INSTR    (0x07 << 4)
+#define TBR_TT_FP_EXCEPTION     (0x0d << 4)
+#define TBR_TT_MP_EXCEPTION     (0x0e << 4)
+#define TBR_TT_DATA_ACC_ERROR   (0x11 << 4)
+#define TBR_TT_DATA_MMU_MISS    (0x12 << 4)
+#define TBR_TT_DATA_ACC_EXCEP   (0x13 << 4)
+#define TBR_TT_DATA_STR_ERROR   (0x14 << 4)
+#define TBR_TT_DIVISION_EXCEP   (0x17 << 4)
+#define TBR_TT_COMMIT_EXCEP     (0x19 << 4)
+#define TBR_TT_INSTR_TLB_MISS   (0x1a << 4)
+#define TBR_TT_DATA_TLB_MISS    (0x1b << 4)
+#define TBR_TT_DATA_DAT_EXCEP   (0x1d << 4)
+#define TBR_TT_DECREMENT_TIMER  (0x1f << 4)
+#define TBR_TT_COMPOUND_EXCEP   (0x20 << 4)
+#define TBR_TT_INTERRUPT_1      (0x21 << 4)
+#define TBR_TT_INTERRUPT_2      (0x22 << 4)
+#define TBR_TT_INTERRUPT_3      (0x23 << 4)
+#define TBR_TT_INTERRUPT_4      (0x24 << 4)
+#define TBR_TT_INTERRUPT_5      (0x25 << 4)
+#define TBR_TT_INTERRUPT_6      (0x26 << 4)
+#define TBR_TT_INTERRUPT_7      (0x27 << 4)
+#define TBR_TT_INTERRUPT_8      (0x28 << 4)
+#define TBR_TT_INTERRUPT_9      (0x29 << 4)
+#define TBR_TT_INTERRUPT_10     (0x2a << 4)
+#define TBR_TT_INTERRUPT_11     (0x2b << 4)
+#define TBR_TT_INTERRUPT_12     (0x2c << 4)
+#define TBR_TT_INTERRUPT_13     (0x2d << 4)
+#define TBR_TT_INTERRUPT_14     (0x2e << 4)
+#define TBR_TT_INTERRUPT_15     (0x2f << 4)
+#define TBR_TT_TRAP0            (0x80 << 4)
+#define TBR_TT_TRAP1            (0x81 << 4)
+#define TBR_TT_TRAP2            (0x82 << 4)
+#define TBR_TT_TRAP3            (0x83 << 4)
+#define TBR_TT_TRAP120          (0xf8 << 4)
+#define TBR_TT_TRAP121          (0xf9 << 4)
+#define TBR_TT_TRAP122          (0xfa << 4)
+#define TBR_TT_TRAP123          (0xfb << 4)
+#define TBR_TT_TRAP124          (0xfc << 4)
+#define TBR_TT_TRAP125          (0xfd << 4)
+#define TBR_TT_TRAP126          (0xfe << 4)
+#define TBR_TT_BREAK            (0xff << 4)
+
+#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120
+#define TBR_TT_ATOMIC_XCHG32    TBR_TT_TRAP121
+#define TBR_TT_ATOMIC_XOR       TBR_TT_TRAP122
+#define TBR_TT_ATOMIC_OR        TBR_TT_TRAP123
+#define TBR_TT_ATOMIC_AND       TBR_TT_TRAP124
+#define TBR_TT_ATOMIC_SUB       TBR_TT_TRAP125
+#define TBR_TT_ATOMIC_ADD       TBR_TT_TRAP126
+
+#define __get_TBR()     ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
+
+/*
+ * HSR0 - Hardware Status Register 0
+ */
+#define HSR0_PDM                0x00000007      /* power down mode */
+#define HSR0_PDM_NORMAL         0x00000000      /* - normal mode */
+#define HSR0_PDM_CORE_SLEEP     0x00000001      /* - CPU core sleep mode */
+#define HSR0_PDM_BUS_SLEEP      0x00000003      /* - bus sleep mode */
+#define HSR0_PDM_PLL_RUN        0x00000005      /* - PLL run */
+#define HSR0_PDM_PLL_STOP       0x00000007      /* - PLL stop */
+#define HSR0_GRLE               0x00000040      /* GR lower register set enable */
+#define HSR0_GRHE               0x00000080      /* GR higher register set enable */
+#define HSR0_FRLE               0x00000100      /* FR lower register set enable */
+#define HSR0_FRHE               0x00000200      /* FR higher register set enable */
+#define HSR0_GRN                0x00000400      /* GR quantity */
+#define HSR0_GRN_64             0x00000000      /* - 64 GR registers */
+#define HSR0_GRN_32             0x00000400      /* - 32 GR registers */
+#define HSR0_FRN                0x00000800      /* FR quantity */
+#define HSR0_FRN_64             0x00000000      /* - 64 FR registers */
+#define HSR0_FRN_32             0x00000800      /* - 32 FR registers */
+#define HSR0_SA                 0x00001000      /* start address (RAMBOOT#) */
+#define HSR0_ETMI               0x00008000      /* enable TIMERI (64-bit up timer) */
+#define HSR0_ETMD               0x00004000      /* enable TIMERD (32-bit down timer) */
+#define HSR0_PEDAT              0x00010000      /* previous DAT mode */
+#define HSR0_XEDAT              0x00020000      /* exception DAT mode */
+#define HSR0_EDAT               0x00080000      /* enable DAT mode */
+#define HSR0_RME                0x00400000      /* enable RAM mode */
+#define HSR0_EMEM               0x00800000      /* enable MMU_Miss mask */
+#define HSR0_EXMMU              0x01000000      /* enable extended MMU mode */
+#define HSR0_EDMMU              0x02000000      /* enable data MMU */
+#define HSR0_EIMMU              0x04000000      /* enable instruction MMU */
+#define HSR0_CBM                0x08000000      /* copy back mode */
+#define HSR0_CBM_WRITE_THRU     0x00000000      /* - write through */
+#define HSR0_CBM_COPY_BACK      0x08000000      /* - copy back */
+#define HSR0_NWA                0x10000000      /* no write allocate */
+#define HSR0_DCE                0x40000000      /* data cache enable */
+#define HSR0_ICE                0x80000000      /* instruction cache enable */
+
+#define __get_HSR(R)    ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; })
+#define __set_HSR(R,V)  do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0)
+
+/*
+ * CCR - Condition Codes Register
+ */
+#define CCR_FCC0                0x0000000f      /* FP/Media condition 0 (fcc0 reg) */
+#define CCR_FCC1                0x000000f0      /* FP/Media condition 1 (fcc1 reg) */
+#define CCR_FCC2                0x00000f00      /* FP/Media condition 2 (fcc2 reg) */
+#define CCR_FCC3                0x0000f000      /* FP/Media condition 3 (fcc3 reg) */
+#define CCR_ICC0                0x000f0000      /* Integer condition 0 (icc0 reg) */
+#define CCR_ICC0_C              0x00010000      /* - Carry flag */
+#define CCR_ICC0_V              0x00020000      /* - Overflow flag */
+#define CCR_ICC0_Z              0x00040000      /* - Zero flag */
+#define CCR_ICC0_N              0x00080000      /* - Negative flag */
+#define CCR_ICC1                0x00f00000      /* Integer condition 1 (icc1 reg) */
+#define CCR_ICC2                0x0f000000      /* Integer condition 2 (icc2 reg) */
+#define CCR_ICC3                0xf0000000      /* Integer condition 3 (icc3 reg) */
+
+/*
+ * CCCR - Condition Codes for Conditional Instructions Register
+ */
+#define CCCR_CC0                0x00000003      /* condition 0 (cc0 reg) */
+#define CCCR_CC0_FALSE          0x00000002      /* - condition is false */
+#define CCCR_CC0_TRUE           0x00000003      /* - condition is true */
+#define CCCR_CC1                0x0000000c      /* condition 1 (cc1 reg) */
+#define CCCR_CC2                0x00000030      /* condition 2 (cc2 reg) */
+#define CCCR_CC3                0x000000c0      /* condition 3 (cc3 reg) */
+#define CCCR_CC4                0x00000300      /* condition 4 (cc4 reg) */
+#define CCCR_CC5                0x00000c00      /* condition 5 (cc5 reg) */
+#define CCCR_CC6                0x00003000      /* condition 6 (cc6 reg) */
+#define CCCR_CC7                0x0000c000      /* condition 7 (cc7 reg) */
+
+/*
+ * ISR - Integer Status Register
+ */
+#define ISR_EMAM                0x00000001      /* memory misaligned access handling */
+#define ISR_EMAM_EXCEPTION      0x00000000      /* - generate exception */
+#define ISR_EMAM_FUDGE          0x00000001      /* - mask out invalid address bits */
+#define ISR_AEXC                0x00000004      /* accrued [overflow] exception */
+#define ISR_DTT                 0x00000018      /* division type trap */
+#define ISR_DTT_IGNORE          0x00000000      /* - ignore division error */
+#define ISR_DTT_DIVBYZERO       0x00000008      /* - generate exception */
+#define ISR_DTT_OVERFLOW        0x00000010      /* - record overflow */
+#define ISR_EDE                 0x00000020      /* enable division exception */
+#define ISR_PLI                 0x20000000      /* pre-load instruction information */
+#define ISR_QI                  0x80000000      /* quad data implementation information */
+
+/*
+ * EPCR0 - Exception PC Register
+ */
+#define EPCR0_V                 0x00000001      /* register content validity indicator */
+#define EPCR0_PC                0xfffffffc      /* faulting instruction address */
+
+/*
+ * ESR0/14/15 - Exception Status Register
+ */
+#define ESRx_VALID              0x00000001      /* register content validity indicator */
+#define ESRx_EC                 0x0000003e      /* exception type */
+#define ESRx_EC_DATA_STORE      0x00000000      /* - data_store_error */
+#define ESRx_EC_INSN_ACCESS     0x00000006      /* - instruction_access_error */
+#define ESRx_EC_PRIV_INSN       0x00000008      /* - privileged_instruction */
+#define ESRx_EC_ILL_INSN        0x0000000a      /* - illegal_instruction */
+#define ESRx_EC_MP_EXCEP        0x0000001c      /* - mp_exception */
+#define ESRx_EC_DATA_ACCESS     0x00000020      /* - data_access_error */
+#define ESRx_EC_DIVISION        0x00000026      /* - division_exception */
+#define ESRx_EC_ITLB_MISS       0x00000034      /* - instruction_access_TLB_miss */
+#define ESRx_EC_DTLB_MISS       0x00000036      /* - data_access_TLB_miss */
+#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a      /* - data_access_DAT_exception */
+
+#define ESR0_IAEC               0x00000100      /* info for instruction-access-exception */
+#define ESR0_IAEC_RESV          0x00000000      /* - reserved */
+#define ESR0_IAEC_PROT_VIOL     0x00000100      /* - protection violation */
+
+#define ESR0_ATXC               0x00f00000      /* address translation exception code */
+#define ESR0_ATXC_MMU_MISS      0x00000000      /* - MMU miss exception and more (?) */
+#define ESR0_ATXC_MULTI_DAT     0x00800000      /* - multiple DAT entry hit */
+#define ESR0_ATXC_MULTI_SAT     0x00900000      /* - multiple SAT entry hit */
+#define ESR0_ATXC_AMRTLB_MISS   0x00a00000      /* - MMU/TLB miss exception */
+#define ESR0_ATXC_PRIV_EXCEP    0x00c00000      /* - privilege protection fault */
+#define ESR0_ATXC_WP_EXCEP      0x00d00000      /* - write protection fault */
+
+#define ESR0_EAV                0x00000800      /* true if EAR0 register valid */
+#define ESR15_EAV               0x00000800      /* true if EAR15 register valid */
+
+/*
+ * ESFR1 - Exception Status Valid Flag Register
+ */
+#define ESFR1_ESR0              0x00000001      /* true if ESR0 is valid */
+#define ESFR1_ESR14             0x00004000      /* true if ESR14 is valid */
+#define ESFR1_ESR15             0x00008000      /* true if ESR15 is valid */
+
+/*
+ * MSR - Media Status Register
+ */
+#define MSR0_AOVF               0x00000001      /* overflow exception accrued */
+#define MSRx_OVF                0x00000002      /* overflow exception detected */
+#define MSRx_SIE                0x0000003c      /* last SIMD instruction exception detected */
+#define MSRx_SIE_NONE           0x00000000      /* - none detected */
+#define MSRx_SIE_FRkHI_ACCk     0x00000020      /* - exception at FRkHI or ACCk */
+#define MSRx_SIE_FRkLO_ACCk1    0x00000010      /* - exception at FRkLO or ACCk+1 */
+#define MSRx_SIE_FRk1HI_ACCk2   0x00000008      /* - exception at FRk+1HI or ACCk+2 */
+#define MSRx_SIE_FRk1LO_ACCk3   0x00000004      /* - exception at FRk+1LO or ACCk+3 */
+#define MSR0_MTT                0x00007000      /* type of last media trap detected */
+#define MSR0_MTT_NONE           0x00000000      /* - none detected */
+#define MSR0_MTT_OVERFLOW       0x00001000      /* - overflow detected */
+#define MSR0_HI                 0x00c00000      /* hardware implementation */
+#define MSR0_HI_ROUNDING        0x00000000      /* - rounding mode */
+#define MSR0_HI_NONROUNDING     0x00c00000      /* - non-rounding mode */
+#define MSR0_EMCI               0x01000000      /* enable media custom instructions */
+#define MSR0_SRDAV              0x10000000      /* select rounding mode of MAVEH */
+#define MSR0_SRDAV_RDAV         0x00000000      /* - controlled by MSR.RDAV */
+#define MSR0_SRDAV_RD           0x10000000      /* - controlled by MSR.RD */
+#define MSR0_RDAV               0x20000000      /* rounding mode of MAVEH */
+#define MSR0_RDAV_NEAREST_MI    0x00000000      /* - round to nearest minus */
+#define MSR0_RDAV_NEAREST_PL    0x20000000      /* - round to nearest plus */
+#define MSR0_RD                 0xc0000000      /* rounding mode */
+#define MSR0_RD_NEAREST         0x00000000      /* - nearest */
+#define MSR0_RD_ZERO            0x40000000      /* - zero */
+#define MSR0_RD_POS_INF         0x80000000      /* - postive infinity */
+#define MSR0_RD_NEG_INF         0xc0000000      /* - negative infinity */
+
+/*
+ * IAMPR0-7 - Instruction Address Mapping Register
+ * DAMPR0-7 - Data Address Mapping Register
+ */
+#define xAMPRx_V                0x00000001      /* register content validity indicator */
+#define DAMPRx_WP               0x00000002      /* write protect */
+#define DAMPRx_WP_RW            0x00000000      /* - read/write */
+#define DAMPRx_WP_RO            0x00000002      /* - read-only */
+#define xAMPRx_C                0x00000004      /* cached/uncached */
+#define xAMPRx_C_CACHED         0x00000000      /* - cached */
+#define xAMPRx_C_UNCACHED       0x00000004      /* - uncached */
+#define xAMPRx_S                0x00000008      /* supervisor only */
+#define xAMPRx_S_USER           0x00000000      /* - userspace can access */
+#define xAMPRx_S_KERNEL         0x00000008      /* - kernel only */
+#define xAMPRx_SS               0x000000f0      /* segment size */
+#define xAMPRx_SS_16Kb          0x00000000      /* - 16 kilobytes */
+#define xAMPRx_SS_64Kb          0x00000010      /* - 64 kilobytes */
+#define xAMPRx_SS_256Kb         0x00000020      /* - 256 kilobytes */
+#define xAMPRx_SS_1Mb           0x00000030      /* - 1 megabyte */
+#define xAMPRx_SS_2Mb           0x00000040      /* - 2 megabytes */
+#define xAMPRx_SS_4Mb           0x00000050      /* - 4 megabytes */
+#define xAMPRx_SS_8Mb           0x00000060      /* - 8 megabytes */
+#define xAMPRx_SS_16Mb          0x00000070      /* - 16 megabytes */
+#define xAMPRx_SS_32Mb          0x00000080      /* - 32 megabytes */
+#define xAMPRx_SS_64Mb          0x00000090      /* - 64 megabytes */
+#define xAMPRx_SS_128Mb         0x000000a0      /* - 128 megabytes */
+#define xAMPRx_SS_256Mb         0x000000b0      /* - 256 megabytes */
+#define xAMPRx_SS_512Mb         0x000000c0      /* - 512 megabytes */
+#define xAMPRx_RESERVED8        0x00000100      /* reserved bit */
+#define xAMPRx_NG               0x00000200      /* non-global */
+#define xAMPRx_L                0x00000400      /* locked */
+#define xAMPRx_M                0x00000800      /* modified */
+#define xAMPRx_D                0x00001000      /* DAT entry */
+#define xAMPRx_RESERVED13       0x00002000      /* reserved bit */
+#define xAMPRx_PPFN             0xfff00000      /* physical page frame number */
+
+#define xAMPRx_V_BIT            0
+#define DAMPRx_WP_BIT           1
+#define xAMPRx_C_BIT            2
+#define xAMPRx_S_BIT            3
+#define xAMPRx_RESERVED8_BIT    8
+#define xAMPRx_NG_BIT           9
+#define xAMPRx_L_BIT            10
+#define xAMPRx_M_BIT            11
+#define xAMPRx_D_BIT            12
+#define xAMPRx_RESERVED13_BIT   13
+
+#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; })
+
+#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; })
+
+#define __set_IAMPR(R,V)        do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0)
+#define __set_DAMPR(R,V)        do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0)
+
+#define __set_IAMLR(R,V)        do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0)
+#define __set_DAMLR(R,V)        do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0)
+
+#define save_dampr(R, _dampr)                                   \
+do {                                                            \
+        asm volatile("movsg dampr"R",%0" : "=r"(_dampr));       \
+} while(0)
+
+#define restore_dampr(R, _dampr)                        \
+do {                                                    \
+        asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \
+} while(0)
+
+/*
+ * AMCR - Address Mapping Control Register
+ */
+#define AMCR_IAMRN              0x000000ff      /* quantity of IAMPR registers */
+#define AMCR_DAMRN              0x0000ff00      /* quantity of DAMPR registers */
+
+/*
+ * TTBR - Address Translation Table Base Register
+ */
+#define __get_TTBR()            ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; })
+
+/*
+ * TPXR - TLB Probe Extend Register
+ */
+#define TPXR_E                  0x00000001
+#define TPXR_LMAX_SHIFT         20
+#define TPXR_LMAX_SMASK         0xf
+#define TPXR_WMAX_SHIFT         24
+#define TPXR_WMAX_SMASK         0xf
+#define TPXR_WAY_SHIFT          28
+#define TPXR_WAY_SMASK          0xf
+
+/*
+ * DCR - Debug Control Register
+ */
+#define DCR_IBCE3               0x00000001      /* break on conditional insn pointed to by IBAR3 */
+#define DCR_IBE3                0x00000002      /* break on insn pointed to by IBAR3 */
+#define DCR_IBCE1               0x00000004      /* break on conditional insn pointed to by IBAR2 */
+#define DCR_IBE1                0x00000008      /* break on insn pointed to by IBAR2 */
+#define DCR_IBCE2               0x00000010      /* break on conditional insn pointed to by IBAR1 */
+#define DCR_IBE2                0x00000020      /* break on insn pointed to by IBAR1 */
+#define DCR_IBCE0               0x00000040      /* break on conditional insn pointed to by IBAR0 */
+#define DCR_IBE0                0x00000080      /* break on insn pointed to by IBAR0 */
+
+#define DCR_DDBE1               0x00004000      /* use DBDR1x when checking DBAR1 */
+#define DCR_DWBE1               0x00008000      /* break on store to address in DBAR1/DBMR1x */
+#define DCR_DRBE1               0x00010000      /* break on load from address in DBAR1/DBMR1x */
+#define DCR_DDBE0               0x00020000      /* use DBDR0x when checking DBAR0 */
+#define DCR_DWBE0               0x00040000      /* break on store to address in DBAR0/DBMR0x */
+#define DCR_DRBE0               0x00080000      /* break on load from address in DBAR0/DBMR0x */
+
+#define DCR_EIM                 0x0c000000      /* external interrupt disable */
+#define DCR_IBM                 0x10000000      /* instruction break disable */
+#define DCR_SE                  0x20000000      /* single step enable */
+#define DCR_EBE                 0x40000000      /* exception break enable */
+
+/*
+ * BRR - Break Interrupt Request Register
+ */
+#define BRR_ST                  0x00000001      /* single-step detected */
+#define BRR_SB                  0x00000002      /* break instruction detected */
+#define BRR_BB                  0x00000004      /* branch with hint detected */
+#define BRR_CBB                 0x00000008      /* branch to LR detected */
+#define BRR_IBx                 0x000000f0      /* hardware breakpoint detected */
+#define BRR_DBx                 0x00000f00      /* hardware watchpoint detected */
+#define BRR_DBNEx               0x0000f000      /* ? */
+#define BRR_EBTT                0x00ff0000      /* trap type of exception break */
+#define BRR_TB                  0x10000000      /* external break request detected */
+#define BRR_CB                  0x20000000      /* ICE break command detected */
+#define BRR_EB                  0x40000000      /* exception break detected */
+
+/*
+ * BPSR - Break PSR Save Register
+ */
+#define BPSR_BET                0x00000001      /* former PSR.ET */
+#define BPSR_BS                 0x00001000      /* former PSR.S */
+
+#endif /* _ASM_SPR_REGS_H */
diff --git a/arch/frv/include/asm/stat.h b/arch/frv/include/asm/stat.h
new file mode 100644
index 000000000000..ce56de9b37ba
--- /dev/null
+++ b/arch/frv/include/asm/stat.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+/* This matches struct stat in uClibc/glibc.  */
+struct stat {
+        unsigned char __pad1[6];
+        unsigned short st_dev;
+
+        unsigned long __pad2;
+        unsigned long st_ino;
+
+        unsigned short __pad3;
+        unsigned short st_mode;
+        unsigned short __pad4;
+        unsigned short st_nlink;
+
+        unsigned short __pad5;
+        unsigned short st_uid;
+        unsigned short __pad6;
+        unsigned short st_gid;
+
+        unsigned char __pad7[6];
+        unsigned short st_rdev;
+
+        unsigned long __pad8;
+        unsigned long st_size;
+
+        unsigned long __pad9;           /* align 64-bit st_blocks to 2-word */
+        unsigned long st_blksize;
+
+        unsigned long __pad10;  /* future possible st_blocks high bits */
+        unsigned long st_blocks;        /* Number 512-byte blocks allocated. */
+
+        unsigned long __unused1;
+        unsigned long st_atime;
+
+        unsigned long __unused2;
+        unsigned long st_mtime;
+
+        unsigned long __unused3;
+        unsigned long st_ctime;
+
+        unsigned long long __unused4;
+};
+
+/* This matches struct stat64 in uClibc/glibc.  The layout is exactly
+   the same as that of struct stat above, with 64-bit types taking up
+   space that was formerly used by padding.  stat syscalls are still
+   different from stat64, though, in that the former tests for
+   overflow.  */
+struct stat64 {
+        unsigned char __pad1[6];
+        unsigned short st_dev;
+
+        unsigned long long st_ino;
+
+        unsigned int st_mode;
+        unsigned int st_nlink;
+
+        unsigned long st_uid;
+        unsigned long st_gid;
+
+        unsigned char __pad2[6];
+        unsigned short st_rdev;
+
+        long long st_size;
+
+        unsigned long __pad3;           /* align 64-bit st_blocks to 2-word */
+        unsigned long st_blksize;
+
+        unsigned long __pad4;           /* future possible st_blocks high bits */
+        unsigned long st_blocks;        /* Number 512-byte blocks allocated. */
+
+        unsigned long st_atime_nsec;
+        unsigned long st_atime;
+
+        unsigned int st_mtime_nsec;
+        unsigned long st_mtime;
+
+        unsigned long st_ctime_nsec;
+        unsigned long st_ctime;
+
+        unsigned long long __unused4;
+};
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/frv/include/asm/statfs.h b/arch/frv/include/asm/statfs.h
new file mode 100644
index 000000000000..741f586045ba
--- /dev/null
+++ b/arch/frv/include/asm/statfs.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_STATFS_H */
+
diff --git a/arch/frv/include/asm/string.h b/arch/frv/include/asm/string.h
new file mode 100644
index 000000000000..5ed310f64b7e
--- /dev/null
+++ b/arch/frv/include/asm/string.h
@@ -0,0 +1,51 @@
+/* string.h: FRV string handling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_STRING_H_
+#define _ASM_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#else /* KERNEL */
+
+/*
+ *      let user libraries deal with these,
+ *      IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+#endif /* _ASM_STRING_H_ */
diff --git a/arch/frv/include/asm/suspend.h b/arch/frv/include/asm/suspend.h
new file mode 100644
index 000000000000..5fa7b5a6ee40
--- /dev/null
+++ b/arch/frv/include/asm/suspend.h
@@ -0,0 +1,20 @@
+/* suspend.h: suspension stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SUSPEND_H
+#define _ASM_SUSPEND_H
+
+static inline int arch_prepare_suspend(void)
+{
+        return 0;
+}
+
+#endif /* _ASM_SUSPEND_H */
diff --git a/arch/frv/include/asm/swab.h b/arch/frv/include/asm/swab.h
new file mode 100644
index 000000000000..f305834b4799
--- /dev/null
+++ b/arch/frv/include/asm/swab.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* _ASM_SWAB_H */
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
new file mode 100644
index 000000000000..7742ec000cc4
--- /dev/null
+++ b/arch/frv/include/asm/system.h
@@ -0,0 +1,301 @@
+/* system.h: FR-V CPU control definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+
+struct thread_struct;
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ * The `mb' is to tell GCC not to cache `current' across this call.
+ */
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev_thread,
+                                struct thread_struct *next_thread,
+                                struct task_struct *prev);
+
+#define switch_to(prev, next, last)                                     \
+do {                                                                    \
+        (prev)->thread.sched_lr =                                       \
+                (unsigned long) __builtin_return_address(0);            \
+        (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+        mb();                                                           \
+} while(0)
+
+/*
+ * interrupt flag manipulation
+ * - use virtual interrupt management since touching the PSR is slow
+ *   - ICC2.Z: T if interrupts virtually disabled
+ *   - ICC2.C: F if interrupts really disabled
+ * - if Z==1 upon interrupt:
+ *   - C is set to 0
+ *   - interrupts are really disabled
+ *   - entry.S returns immediately
+ * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts
+ *   - if taken, the trap:
+ *     - sets ICC2.C
+ *     - enables interrupts
+ */
+#define local_irq_disable()                                     \
+do {                                                            \
+        /* set Z flag, but don't change the C flag */           \
+        asm volatile("  andcc   gr0,gr0,gr0,icc2        \n"     \
+                     :                                          \
+                     :                                          \
+                     : "memory", "icc2"                         \
+                     );                                         \
+} while(0)
+
+#define local_irq_enable()                                      \
+do {                                                            \
+        /* clear Z flag and then test the C flag */             \
+        asm volatile("  oricc   gr0,#1,gr0,icc2         \n"     \
+                     "  tihi    icc2,gr0,#2             \n"     \
+                     :                                          \
+                     :                                          \
+                     : "memory", "icc2"                         \
+                     );                                         \
+} while(0)
+
+#define local_save_flags(flags)                                 \
+do {                                                            \
+        typecheck(unsigned long, flags);                        \
+        asm volatile("movsg ccr,%0"                             \
+                     : "=r"(flags)                              \
+                     :                                          \
+                     : "memory");                               \
+                                                                \
+        /* shift ICC2.Z to bit 0 */                             \
+        flags >>= 26;                                           \
+                                                                \
+        /* make flags 1 if interrupts disabled, 0 otherwise */  \
+        flags &= 1UL;                                           \
+} while(0)
+
+#define irqs_disabled() \
+        ({unsigned long flags; local_save_flags(flags); !!flags; })
+
+#define local_irq_save(flags)                   \
+do {                                            \
+        typecheck(unsigned long, flags);        \
+        local_save_flags(flags);                \
+        local_irq_disable();                    \
+} while(0)
+
+#define local_irq_restore(flags)                                        \
+do {                                                                    \
+        typecheck(unsigned long, flags);                                \
+                                                                        \
+        /* load the Z flag by turning 1 if disabled into 0 if disabled  \
+         * and thus setting the Z flag but not the C flag */            \
+        asm volatile("  xoricc  %0,#1,gr0,icc2          \n"             \
+                     /* then test Z=0 and C=0 */                        \
+                     "  tihi    icc2,gr0,#2             \n"             \
+                     :                                                  \
+                     : "r"(flags)                                       \
+                     : "memory", "icc2"                                 \
+                     );                                                 \
+                                                                        \
+} while(0)
+
+/*
+ * real interrupt flag manipulation
+ */
+#define __local_irq_disable()                           \
+do {                                                    \
+        unsigned long psr;                              \
+        asm volatile("  movsg   psr,%0          \n"     \
+                     "  andi    %0,%2,%0        \n"     \
+                     "  ori     %0,%1,%0        \n"     \
+                     "  movgs   %0,psr          \n"     \
+                     : "=r"(psr)                        \
+                     : "i" (PSR_PIL_14), "i" (~PSR_PIL) \
+                     : "memory");                       \
+} while(0)
+
+#define __local_irq_enable()                            \
+do {                                                    \
+        unsigned long psr;                              \
+        asm volatile("  movsg   psr,%0          \n"     \
+                     "  andi    %0,%1,%0        \n"     \
+                     "  movgs   %0,psr          \n"     \
+                     : "=r"(psr)                        \
+                     : "i" (~PSR_PIL)                   \
+                     : "memory");                       \
+} while(0)
+
+#define __local_save_flags(flags)               \
+do {                                            \
+        typecheck(unsigned long, flags);        \
+        asm("movsg psr,%0"                      \
+            : "=r"(flags)                       \
+            :                                   \
+            : "memory");                        \
+} while(0)
+
+#define __local_irq_save(flags)                         \
+do {                                                    \
+        unsigned long npsr;                             \
+        typecheck(unsigned long, flags);                \
+        asm volatile("  movsg   psr,%0          \n"     \
+                     "  andi    %0,%3,%1        \n"     \
+                     "  ori     %1,%2,%1        \n"     \
+                     "  movgs   %1,psr          \n"     \
+                     : "=r"(flags), "=r"(npsr)          \
+                     : "i" (PSR_PIL_14), "i" (~PSR_PIL) \
+                     : "memory");                       \
+} while(0)
+
+#define __local_irq_restore(flags)                      \
+do {                                                    \
+        typecheck(unsigned long, flags);                \
+        asm volatile("  movgs   %0,psr          \n"     \
+                     :                                  \
+                     : "r" (flags)                      \
+                     : "memory");                       \
+} while(0)
+
+#define __irqs_disabled() \
+        ((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
+
+/*
+ * Force strict CPU ordering.
+ */
+#define nop()                   asm volatile ("nop"::)
+#define mb()                    asm volatile ("membar" : : :"memory")
+#define rmb()                   asm volatile ("membar" : : :"memory")
+#define wmb()                   asm volatile ("membar" : : :"memory")
+#define read_barrier_depends()  do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()                        mb()
+#define smp_rmb()                       rmb()
+#define smp_wmb()                       wmb()
+#define smp_read_barrier_depends()      read_barrier_depends()
+#define set_mb(var, value) \
+        do { xchg(&var, (value)); } while (0)
+#else
+#define smp_mb()                        barrier()
+#define smp_rmb()                       barrier()
+#define smp_wmb()                       barrier()
+#define smp_read_barrier_depends()      do {} while(0)
+#define set_mb(var, value) \
+        do { var = (value); barrier(); } while (0)
+#endif
+
+extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2)));
+extern void free_initmem(void);
+
+#define arch_align_stack(x) (x)
+
+/*****************************************************************************/
+/*
+ * compare and conditionally exchange value with memory
+ * - if (*ptr == test) then orig = *ptr; *ptr = test;
+ * - if (*ptr != test) then orig = *ptr;
+ */
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define cmpxchg(ptr, test, new)                                                 \
+({                                                                              \
+        __typeof__(ptr) __xg_ptr = (ptr);                                       \
+        __typeof__(*(ptr)) __xg_orig, __xg_tmp;                                 \
+        __typeof__(*(ptr)) __xg_test = (test);                                  \
+        __typeof__(*(ptr)) __xg_new = (new);                                    \
+                                                                                \
+        switch (sizeof(__xg_orig)) {                                            \
+        case 4:                                                                 \
+                asm volatile(                                                   \
+                        "0:                                             \n"     \
+                        "       orcc            gr0,gr0,gr0,icc3        \n"     \
+                        "       ckeq            icc3,cc7                \n"     \
+                        "       ld.p            %M0,%1                  \n"     \
+                        "       orcr            cc7,cc7,cc3             \n"     \
+                        "       sub%I4cc        %1,%4,%2,icc0           \n"     \
+                        "       bne             icc0,#0,1f              \n"     \
+                        "       cst.p           %3,%M0          ,cc3,#1 \n"     \
+                        "       corcc           gr29,gr29,gr0   ,cc3,#1 \n"     \
+                        "       beq             icc3,#0,0b              \n"     \
+                        "1:                                             \n"     \
+                        : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp)    \
+                        : "r"(__xg_new), "NPr"(__xg_test)                       \
+                        : "memory", "cc7", "cc3", "icc3", "icc0"                \
+                        );                                                      \
+                break;                                                          \
+                                                                                \
+        default:                                                                \
+                __xg_orig = (__typeof__(__xg_orig))0;                           \
+                asm volatile("break");                                          \
+                break;                                                          \
+        }                                                                       \
+                                                                                \
+        __xg_orig;                                                              \
+})
+
+#else
+
+extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new);
+
+#define cmpxchg(ptr, test, new)                                                 \
+({                                                                              \
+        __typeof__(ptr) __xg_ptr = (ptr);                                       \
+        __typeof__(*(ptr)) __xg_orig;                                           \
+        __typeof__(*(ptr)) __xg_test = (test);                                  \
+        __typeof__(*(ptr)) __xg_new = (new);                                    \
+                                                                                \
+        switch (sizeof(__xg_orig)) {                                            \
+        case 4: __xg_orig = (__force __typeof__(*ptr))                          \
+                        __cmpxchg_32((__force uint32_t *)__xg_ptr,              \
+                                         (__force uint32_t)__xg_test,           \
+                                         (__force uint32_t)__xg_new); break;    \
+        default:                                                                \
+                __xg_orig = (__typeof__(__xg_orig))0;                           \
+                asm volatile("break");                                          \
+                break;                                                          \
+        }                                                                       \
+                                                                                \
+        __xg_orig;                                                              \
+})
+
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+                                      unsigned long old,
+                                      unsigned long new, int size)
+{
+        switch (size) {
+        case 4:
+                return cmpxchg((unsigned long *)ptr, old, new);
+        default:
+                return __cmpxchg_local_generic(ptr, old, new, size);
+        }
+
+        return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)                                        \
+        ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
+                        (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/asm/termbits.h
new file mode 100644
index 000000000000..5568492b5086
--- /dev/null
+++ b/arch/frv/include/asm/termbits.h
@@ -0,0 +1,202 @@
+#ifndef _ASM_TERMBITS_H__
+#define _ASM_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+typedef unsigned int    tcflag_t;
+
+#define NCCS 19
+struct termios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+};
+
+struct termios2 {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+struct ktermios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK  0000001
+#define BRKINT  0000002
+#define IGNPAR  0000004
+#define PARMRK  0000010
+#define INPCK   0000020
+#define ISTRIP  0000040
+#define INLCR   0000100
+#define IGNCR   0000200
+#define ICRNL   0000400
+#define IUCLC   0001000
+#define IXON    0002000
+#define IXANY   0004000
+#define IXOFF   0010000
+#define IMAXBEL 0020000
+#define IUTF8   0040000
+
+/* c_oflag bits */
+#define OPOST   0000001
+#define OLCUC   0000002
+#define ONLCR   0000004
+#define OCRNL   0000010
+#define ONOCR   0000020
+#define ONLRET  0000040
+#define OFILL   0000100
+#define OFDEL   0000200
+#define NLDLY   0000400
+#define   NL0   0000000
+#define   NL1   0000400
+#define CRDLY   0003000
+#define   CR0   0000000
+#define   CR1   0001000
+#define   CR2   0002000
+#define   CR3   0003000
+#define TABDLY  0014000
+#define   TAB0  0000000
+#define   TAB1  0004000
+#define   TAB2  0010000
+#define   TAB3  0014000
+#define   XTABS 0014000
+#define BSDLY   0020000
+#define   BS0   0000000
+#define   BS1   0020000
+#define VTDLY   0040000
+#define   VT0   0000000
+#define   VT1   0040000
+#define FFDLY   0100000
+#define   FF0   0000000
+#define   FF1   0100000
+
+/* c_cflag bit meaning */
+#define CBAUD   0010017
+#define  B0     0000000         /* hang up */
+#define  B50    0000001
+#define  B75    0000002
+#define  B110   0000003
+#define  B134   0000004
+#define  B150   0000005
+#define  B200   0000006
+#define  B300   0000007
+#define  B600   0000010
+#define  B1200  0000011
+#define  B1800  0000012
+#define  B2400  0000013
+#define  B4800  0000014
+#define  B9600  0000015
+#define  B19200 0000016
+#define  B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define   CS5   0000000
+#define   CS6   0000020
+#define   CS7   0000040
+#define   CS8   0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD    002003600000          /* Input baud rate */
+#define CTVB      004000000000          /* VisioBraille Terminal flow control */
+#define CMSPAR    010000000000          /* mark or space (stick) parity */
+#define CRTSCTS   020000000000          /* flow control */
+
+#define IBSHIFT 16                      /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF          0
+#define TCOON           1
+#define TCIOFF          2
+#define TCION           3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH        0
+#define TCOFLUSH        1
+#define TCIOFLUSH       2
+
+/* tcsetattr uses these */
+#define TCSANOW         0
+#define TCSADRAIN       1
+#define TCSAFLUSH       2
+
+#endif /* _ASM_TERMBITS_H__ */
+
diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h
new file mode 100644
index 000000000000..a62fb5872375
--- /dev/null
+++ b/arch/frv/include/asm/termios.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+        unsigned short ws_row;
+        unsigned short ws_col;
+        unsigned short ws_xpixel;
+        unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+        unsigned short c_iflag;         /* input mode flags */
+        unsigned short c_oflag;         /* output mode flags */
+        unsigned short c_cflag;         /* control mode flags */
+        unsigned short c_lflag;         /* local mode flags */
+        unsigned char c_line;           /* line discipline */
+        unsigned char c_cc[NCC];        /* control characters */
+};
+
+#ifdef __KERNEL__
+/*      intr=^C         quit=^|         erase=del       kill=^U
+        eof=^D          vtime=\0        vmin=\1         sxtc=\0
+        start=^Q        stop=^S         susp=^Z         eol=\0
+        reprint=^R      discard=^U      werase=^W       lnext=^V
+        eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE        0x001
+#define TIOCM_DTR       0x002
+#define TIOCM_RTS       0x004
+#define TIOCM_ST        0x008
+#define TIOCM_SR        0x010
+#define TIOCM_CTS       0x020
+#define TIOCM_CAR       0x040
+#define TIOCM_RNG       0x080
+#define TIOCM_DSR       0x100
+#define TIOCM_CD        TIOCM_CAR
+#define TIOCM_RI        TIOCM_RNG
+#define TIOCM_OUT1      0x2000
+#define TIOCM_OUT2      0x4000
+#define TIOCM_LOOP      0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+#include <asm-generic/termios.h>
+#endif
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
new file mode 100644
index 000000000000..bb53ab753ffb
--- /dev/null
+++ b/arch/frv/include/asm/thread_info.h
@@ -0,0 +1,144 @@
+/* thread_info.h: description
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/thread_info.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define THREAD_SIZE             8192
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+        struct task_struct      *task;          /* main task structure */
+        struct exec_domain      *exec_domain;   /* execution domain */
+        unsigned long           flags;          /* low level flags */
+        unsigned long           status;         /* thread-synchronous flags */
+        __u32                   cpu;            /* current CPU */
+        int                     preempt_count;  /* 0 => preemptable, <0 => BUG */
+
+        mm_segment_t            addr_limit;     /* thread address space:
+                                                 * 0-0xBFFFFFFF for user-thead
+                                                 * 0-0xFFFFFFFF for kernel-thread
+                                                 */
+        struct restart_block    restart_block;
+
+        __u8                    supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif
+
+#define PREEMPT_ACTIVE          0x10000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .flags          = 0,                    \
+        .cpu            = 0,                    \
+        .preempt_count  = 1,                    \
+        .addr_limit     = KERNEL_DS,            \
+        .restart_block = {                      \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *__current_thread_info asm("gr15");
+
+#define current_thread_info() ({ __current_thread_info; })
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)                                  \
+        ({                                                      \
+                struct thread_info *ret;                        \
+                                                                \
+                ret = kzalloc(THREAD_SIZE, GFP_KERNEL);         \
+                                                                \
+                ret;                                            \
+        })
+#else
+#define alloc_thread_info(tsk)  kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info)  kfree(info)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_SIGPENDING          1       /* signal pending */
+#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
+#define TIF_SINGLESTEP          3       /* restore singlestep on return to user mode */
+#define TIF_IRET                4       /* return with iret */
+#define TIF_RESTORE_SIGMASK     5       /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG      16      /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE              17      /* OOM killer killed process */
+#define TIF_FREEZE              18      /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE      (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
+#define _TIF_IRET               (1 << TIF_IRET)
+#define _TIF_RESTORE_SIGMASK    (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE             (1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK          0x0000FFFE      /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK       0x0000FFFF      /* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPM              0x0001  /* FPU/Media was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/frv/include/asm/timer-regs.h b/arch/frv/include/asm/timer-regs.h
new file mode 100644
index 000000000000..6c5a871ce5e9
--- /dev/null
+++ b/arch/frv/include/asm/timer-regs.h
@@ -0,0 +1,106 @@
+/* timer-regs.h: hardware timer register definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/sections.h>
+
+extern unsigned long __nongprelbss __clkin_clock_speed_HZ;
+extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __res_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __sdram_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_clock_speed_HZ;
+extern unsigned long __nongprelbss __dsu_clock_speed_HZ;
+extern unsigned long __nongprelbss __serial_clock_speed_HZ;
+
+#define __get_CLKC()    ({ *(volatile unsigned long *)(0xfeff9a00); })
+
+static inline void __set_CLKC(unsigned long v)
+{
+        int tmp;
+
+        asm volatile("  st%I0.p %2,%M0          \n"
+                     "  setlos  %3,%1           \n"
+                     "  membar                  \n"
+                     "0:                        \n"
+                     "  subicc  %1,#1,%1,icc0   \n"
+                     "  bnc     icc0,#1,0b      \n"
+                     : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp)
+                     : "r"(v), "i"(256)
+                     : "icc0");
+}
+
+#define __get_TCTR()    ({ *(volatile unsigned long *)(0xfeff9418); })
+#define __get_TPRV()    ({ *(volatile unsigned long *)(0xfeff9420); })
+#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); })
+#define __get_TCSR(T)   ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); })
+#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); })
+
+#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; })
+
+#define __set_TCTR(V)   do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0)
+#define __set_TPRV(V)   do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0)
+#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0)
+#define __set_TCSR(T,V) \
+do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TxCKSL(T,V) \
+do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24)
+#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V)))
+
+/* clock control register */
+#define CLKC_CMODE              0x0f000000
+#define CLKC_SLPL               0x000f0000
+#define CLKC_P0                 0x00000100
+#define CLKC_CM                 0x00000003
+
+#define CLKC_CMODE_s            24
+
+/* timer control register - non-readback mode */
+#define TCTR_MODE_0             0x00000000
+#define TCTR_MODE_2             0x04000000
+#define TCTR_MODE_4             0x08000000
+#define TCTR_MODE_5             0x0a000000
+#define TCTR_RL_LATCH           0x00000000
+#define TCTR_RL_RW_LOW8         0x10000000
+#define TCTR_RL_RW_HIGH8        0x20000000
+#define TCTR_RL_RW_LH8          0x30000000
+#define TCTR_SC_CTR0            0x00000000
+#define TCTR_SC_CTR1            0x40000000
+#define TCTR_SC_CTR2            0x80000000
+
+/* timer control register - readback mode */
+#define TCTR_CNT0               0x02000000
+#define TCTR_CNT1               0x04000000
+#define TCTR_CNT2               0x08000000
+#define TCTR_NSTATUS            0x10000000
+#define TCTR_NCOUNT             0x20000000
+#define TCTR_SC_READBACK        0xc0000000
+
+/* timer control status registers - non-readback mode */
+#define TCSRx_DATA              0xff000000
+
+/* timer control status registers - readback mode */
+#define TCSRx_OUTPUT            0x80000000
+#define TCSRx_NULLCOUNT         0x40000000
+#define TCSRx_RL                0x30000000
+#define TCSRx_MODE              0x07000000
+
+/* timer clock select registers */
+#define TxCKSL_SELECT           0x0f000000
+#define __TxCKSL_SELECT(X)      ((X) << 24)
+#define TxCKSL_EIGHT            0xf0000000
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/frv/include/asm/timex.h b/arch/frv/include/asm/timex.h
new file mode 100644
index 000000000000..a89bddefdacf
--- /dev/null
+++ b/arch/frv/include/asm/timex.h
@@ -0,0 +1,20 @@
+/* timex.h: FR-V architecture timex specifications
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#define CLOCK_TICK_RATE         1193180 /* Underlying HZ */
+#define CLOCK_TICK_FACTOR       20      /* Factor of both 1000000 and CLOCK_TICK_RATE */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+        return 0;
+}
+
+#define vxtime_lock()           do {} while (0)
+#define vxtime_unlock()         do {} while (0)
+
+#endif
+
diff --git a/arch/frv/include/asm/tlb.h b/arch/frv/include/asm/tlb.h
new file mode 100644
index 000000000000..cd458eb6d75e
--- /dev/null
+++ b/arch/frv/include/asm/tlb.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_MMU
+extern void check_pgt_cache(void);
+#else
+#define check_pgt_cache() do {} while(0)
+#endif
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)                         do { } while (0)
+#define tlb_end_vma(tlb, vma)                           do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)      do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb)          flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
+
diff --git a/arch/frv/include/asm/tlbflush.h b/arch/frv/include/asm/tlbflush.h
new file mode 100644
index 000000000000..7ac5eafc5d98
--- /dev/null
+++ b/arch/frv/include/asm/tlbflush.h
@@ -0,0 +1,73 @@
+/* tlbflush.h: TLB flushing functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef __ASSEMBLY__
+extern void asmlinkage __flush_tlb_all(void);
+extern void asmlinkage __flush_tlb_mm(unsigned long contextid);
+extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start);
+extern void asmlinkage __flush_tlb_range(unsigned long contextid,
+                                         unsigned long start, unsigned long end);
+#endif /* !__ASSEMBLY__ */
+
+#define flush_tlb_all()                         \
+do {                                            \
+        preempt_disable();                      \
+        __flush_tlb_all();                      \
+        preempt_enable();                       \
+} while(0)
+
+#define flush_tlb_mm(mm)                        \
+do {                                            \
+        preempt_disable();                      \
+        __flush_tlb_mm((mm)->context.id);       \
+        preempt_enable();                       \
+} while(0)
+
+#define flush_tlb_range(vma,start,end)                                  \
+do {                                                                    \
+        preempt_disable();                                              \
+        __flush_tlb_range((vma)->vm_mm->context.id, start, end);        \
+        preempt_enable();                                               \
+} while(0)
+
+#define flush_tlb_page(vma,addr)                                \
+do {                                                            \
+        preempt_disable();                                      \
+        __flush_tlb_page((vma)->vm_mm->context.id, addr);       \
+        preempt_enable();                                       \
+} while(0)
+
+
+#define __flush_tlb_global()                    flush_tlb_all()
+#define flush_tlb()                             flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)      flush_tlb_all()
+
+#else
+
+#define flush_tlb()                             BUG()
+#define flush_tlb_all()                         BUG()
+#define flush_tlb_mm(mm)                        BUG()
+#define flush_tlb_page(vma,addr)                BUG()
+#define flush_tlb_range(mm,start,end)           BUG()
+#define flush_tlb_kernel_range(start, end)      BUG()
+
+#endif
+
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/arch/frv/include/asm/topology.h b/arch/frv/include/asm/topology.h
new file mode 100644
index 000000000000..942724352705
--- /dev/null
+++ b/arch/frv/include/asm/topology.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_TOPOLOGY_H
+#define _ASM_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#error NUMA not supported yet
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_TOPOLOGY_H */
diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h
new file mode 100644
index 000000000000..613bf1e962f0
--- /dev/null
+++ b/arch/frv/include/asm/types.h
@@ -0,0 +1,40 @@
+/* types.h: FRV types
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h
new file mode 100644
index 000000000000..53650c958f41
--- /dev/null
+++ b/arch/frv/include/asm/uaccess.h
@@ -0,0 +1,321 @@
+/* uaccess.h: userspace accessor functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/segment.h>
+#include <asm/sections.h>
+
+#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */
+
+#define __ptr(x) ((unsigned long __force *)(x))
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
+{
+#ifdef CONFIG_MMU
+        int flag = -EFAULT, tmp;
+
+        asm volatile (
+                "       addcc   %3,%2,%1,icc0   \n"     /* set C-flag if addr+size>4GB */
+                "       subcc.p %1,%4,gr0,icc1  \n"     /* jump if addr+size>limit */
+                "       bc      icc0,#0,0f      \n"
+                "       bhi     icc1,#0,0f      \n"
+                "       setlos  #0,%0           \n"     /* mark okay */
+                "0:                             \n"
+                : "=r"(flag), "=&r"(tmp)
+                : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag)
+                );
+
+        return flag;
+
+#else
+
+        if (addr < memory_start ||
+            addr > memory_end ||
+            size > memory_end - memory_start ||
+            addr + size > memory_end)
+                return -EFAULT;
+
+        return 0;
+#endif
+}
+
+#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size))
+
+#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0)
+#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr)                                              \
+({                                                                      \
+        int __pu_err = 0;                                               \
+                                                                        \
+        typeof(*(ptr)) __pu_val = (x);                                  \
+        __chk_user_ptr(ptr);                                            \
+                                                                        \
+        switch (sizeof (*(ptr))) {                                      \
+        case 1:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, "b", "r");      \
+                break;                                                  \
+        case 2:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, "h", "r");      \
+                break;                                                  \
+        case 4:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, "",  "r");      \
+                break;                                                  \
+        case 8:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, "d", "e");      \
+                break;                                                  \
+        default:                                                        \
+                __pu_err = __put_user_bad();                            \
+                break;                                                  \
+        }                                                               \
+        __pu_err;                                                       \
+})
+
+#define put_user(x, ptr)                        \
+({                                              \
+        typeof(*(ptr)) __user *_p = (ptr);      \
+        int _e;                                 \
+                                                \
+        _e = __range_ok(_p, sizeof(*_p));       \
+        if (_e == 0)                            \
+                _e = __put_user((x), _p);       \
+        _e;                                     \
+})
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#ifdef CONFIG_MMU
+
+#define __put_user_asm(err,x,ptr,dsize,constraint)                                      \
+do {                                                                                    \
+        asm volatile("1:        st"dsize"%I1    %2,%M1  \n"                             \
+                     "2:                                \n"                             \
+                     ".subsection 2                     \n"                             \
+                     "3:        setlos          %3,%0   \n"                             \
+                     "          bra             2b      \n"                             \
+                     ".previous                         \n"                             \
+                     ".section __ex_table,\"a\"         \n"                             \
+                     "          .balign         8       \n"                             \
+                     "          .long           1b,3b   \n"                             \
+                     ".previous"                                                        \
+                     : "=r" (err)                                                       \
+                     : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err)        \
+                     : "memory");                                                       \
+} while (0)
+
+#else
+
+#define __put_user_asm(err,x,ptr,bwl,con)       \
+do {                                            \
+        asm("   st"bwl"%I0      %1,%M0  \n"     \
+            "   membar                  \n"     \
+            :                                   \
+            : "m" (*__ptr(ptr)), con (x)        \
+            : "memory");                        \
+} while (0)
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define __get_user(x, ptr)                                              \
+({                                                                      \
+        int __gu_err = 0;                                               \
+        __chk_user_ptr(ptr);                                            \
+                                                                        \
+        switch (sizeof(*(ptr))) {                                       \
+        case 1: {                                                       \
+                unsigned char __gu_val;                                 \
+                __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r");    \
+                (x) = *(__force __typeof__(*(ptr)) *) &__gu_val;        \
+                break;                                                  \
+        }                                                               \
+        case 2: {                                                       \
+                unsigned short __gu_val;                                \
+                __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r");    \
+                (x) = *(__force __typeof__(*(ptr)) *) &__gu_val;        \
+                break;                                                  \
+        }                                                               \
+        case 4: {                                                       \
+                unsigned int __gu_val;                                  \
+                __get_user_asm(__gu_err, __gu_val, ptr, "", "=r");      \
+                (x) = *(__force __typeof__(*(ptr)) *) &__gu_val;        \
+                break;                                                  \
+        }                                                               \
+        case 8: {                                                       \
+                unsigned long long __gu_val;                            \
+                __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e");     \
+                (x) = *(__force __typeof__(*(ptr)) *) &__gu_val;        \
+                break;                                                  \
+        }                                                               \
+        default:                                                        \
+                __gu_err = __get_user_bad();                            \
+                break;                                                  \
+        }                                                               \
+        __gu_err;                                                       \
+})
+
+#define get_user(x, ptr)                        \
+({                                              \
+        const typeof(*(ptr)) __user *_p = (ptr);\
+        int _e;                                 \
+                                                \
+        _e = __range_ok(_p, sizeof(*_p));       \
+        if (likely(_e == 0))                    \
+                _e = __get_user((x), _p);       \
+        else                                    \
+                (x) = (typeof(x)) 0;            \
+        _e;                                     \
+})
+
+extern int __get_user_bad(void);
+
+#ifdef CONFIG_MMU
+
+#define __get_user_asm(err,x,ptr,dtype,constraint)      \
+do {                                                    \
+        asm("1:         ld"dtype"%I2    %M2,%1  \n"     \
+            "2:                                 \n"     \
+            ".subsection 2                      \n"     \
+            "3:         setlos          %3,%0   \n"     \
+            "           setlos          #0,%1   \n"     \
+            "           bra             2b      \n"     \
+            ".previous                          \n"     \
+            ".section __ex_table,\"a\"          \n"     \
+            "           .balign         8       \n"     \
+            "           .long           1b,3b   \n"     \
+            ".previous"                                 \
+            : "=r" (err), constraint (x)                \
+            : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \
+            );                                          \
+} while(0)
+
+#else
+
+#define __get_user_asm(err,x,ptr,bwl,con)       \
+        asm("   ld"bwl"%I1      %M1,%0  \n"     \
+            "   membar                  \n"     \
+            : con(x)                            \
+            : "m" (*__ptr(ptr)))
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define ____force(x) (__force void *)(void __user *)(x)
+#ifdef CONFIG_MMU
+extern long __memset_user(void *dst, unsigned long count);
+extern long __memcpy_user(void *dst, const void *src, unsigned long count);
+
+#define clear_user(dst,count)                   __memset_user(____force(dst), (count))
+#define __copy_from_user_inatomic(to, from, n)  __memcpy_user((to), ____force(from), (n))
+#define __copy_to_user_inatomic(to, from, n)    __memcpy_user(____force(to), (from), (n))
+
+#else
+
+#define clear_user(dst,count)                   (memset(____force(dst), 0, (count)), 0)
+#define __copy_from_user_inatomic(to, from, n)  (memcpy((to), ____force(from), (n)), 0)
+#define __copy_to_user_inatomic(to, from, n)    (memcpy(____force(to), (from), (n)), 0)
+
+#endif
+
+#define __clear_user clear_user
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_to_user_inatomic(to, from, n);
+}
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_from_user_inatomic(to, from, n);
+}
+
+static inline long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+        unsigned long ret = n;
+
+        if (likely(__access_ok(from, n)))
+                ret = __copy_from_user(to, from, n);
+
+        if (unlikely(ret != 0))
+                memset(to + (n - ret), 0, ret);
+
+        return ret;
+}
+
+static inline long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+        return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n;
+}
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *src, long count);
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+extern unsigned long search_exception_table(unsigned long addr);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/frv/include/asm/ucontext.h b/arch/frv/include/asm/ucontext.h
new file mode 100644
index 000000000000..8d8c0c948007
--- /dev/null
+++ b/arch/frv/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+        unsigned long           uc_flags;
+        struct ucontext         *uc_link;
+        stack_t                 uc_stack;
+        struct sigcontext       uc_mcontext;
+        sigset_t                uc_sigmask;     /* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/frv/include/asm/unaligned.h b/arch/frv/include/asm/unaligned.h
new file mode 100644
index 000000000000..6c61c05b2e0c
--- /dev/null
+++ b/arch/frv/include/asm/unaligned.h
@@ -0,0 +1,22 @@
+/* unaligned.h: unaligned access handler
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned   __get_unaligned_be
+#define put_unaligned   __put_unaligned_be
+
+#endif /* _ASM_UNALIGNED_H */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
new file mode 100644
index 000000000000..edcfaf5f0414
--- /dev/null
+++ b/arch/frv/include/asm/unistd.h
@@ -0,0 +1,382 @@
+#ifndef _ASM_UNISTD_H_
+#define _ASM_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lchown              16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+// #define __NR_oldolduname      /* 59 */ obsolete
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+// #define __NR_mmap             90     /* obsolete - not implemented */
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+// #define __NR_profil           /* 98 */ obsolete
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+// #define __NR_ioperm          /* 101 */ not supported
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+// #define __NR_olduname                /* 109 */ obsolete
+// #define __NR_iopl            /* 110 */ not supported
+#define __NR_vhangup            111
+// #define __NR_idle            /* 112 */ Obsolete
+// #define __NR_vm86old         /* 113 */ not supported
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+// #define __NR_modify_ldt      /* 123 */ not supported
+#define __NR_cacheflush         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+// #define __NR_vm86            /* 166 */ not supported
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_chown              182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg            188     /* some people actually want streams */
+#define __NR_putpmsg            189     /* some people actually want streams */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_lchown32           198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_chown32            212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+
+#define __NR_getdents64         220
+#define __NR_fcntl64            221
+#define __NR_security           223     /* syscall for security modules */
+#define __NR_gettid             224
+#define __NR_readahead          225
+#define __NR_setxattr           226
+#define __NR_lsetxattr          227
+#define __NR_fsetxattr          228
+#define __NR_getxattr           229
+#define __NR_lgetxattr          230
+#define __NR_fgetxattr          231
+#define __NR_listxattr          232
+#define __NR_llistxattr         233
+#define __NR_flistxattr         234
+#define __NR_removexattr        235
+#define __NR_lremovexattr       236
+#define __NR_fremovexattr       237
+#define __NR_tkill              238
+#define __NR_sendfile64         239
+#define __NR_futex              240
+#define __NR_sched_setaffinity  241
+#define __NR_sched_getaffinity  242
+#define __NR_set_thread_area    243
+#define __NR_get_thread_area    244
+#define __NR_io_setup           245
+#define __NR_io_destroy         246
+#define __NR_io_getevents       247
+#define __NR_io_submit          248
+#define __NR_io_cancel          249
+#define __NR_fadvise64          250
+
+#define __NR_exit_group         252
+#define __NR_lookup_dcookie     253
+#define __NR_epoll_create       254
+#define __NR_epoll_ctl          255
+#define __NR_epoll_wait         256
+#define __NR_remap_file_pages   257
+#define __NR_set_tid_address    258
+#define __NR_timer_create       259
+#define __NR_timer_settime      (__NR_timer_create+1)
+#define __NR_timer_gettime      (__NR_timer_create+2)
+#define __NR_timer_getoverrun   (__NR_timer_create+3)
+#define __NR_timer_delete       (__NR_timer_create+4)
+#define __NR_clock_settime      (__NR_timer_create+5)
+#define __NR_clock_gettime      (__NR_timer_create+6)
+#define __NR_clock_getres       (__NR_timer_create+7)
+#define __NR_clock_nanosleep    (__NR_timer_create+8)
+#define __NR_statfs64           268
+#define __NR_fstatfs64          269
+#define __NR_tgkill             270
+#define __NR_utimes             271
+#define __NR_fadvise64_64       272
+#define __NR_vserver            273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load         283
+#define __NR_waitid             284
+/* #define __NR_sys_setaltroot  285 */
+#define __NR_add_key            286
+#define __NR_request_key        287
+#define __NR_keyctl             288
+#define __NR_ioprio_set         289
+#define __NR_ioprio_get         290
+#define __NR_inotify_init       291
+#define __NR_inotify_add_watch  292
+#define __NR_inotify_rm_watch   293
+#define __NR_migrate_pages      294
+#define __NR_openat             295
+#define __NR_mkdirat            296
+#define __NR_mknodat            297
+#define __NR_fchownat           298
+#define __NR_futimesat          299
+#define __NR_fstatat64          300
+#define __NR_unlinkat           301
+#define __NR_renameat           302
+#define __NR_linkat             303
+#define __NR_symlinkat          304
+#define __NR_readlinkat         305
+#define __NR_fchmodat           306
+#define __NR_faccessat          307
+#define __NR_pselect6           308
+#define __NR_ppoll              309
+#define __NR_unshare            310
+#define __NR_set_robust_list    311
+#define __NR_get_robust_list    312
+#define __NR_splice             313
+#define __NR_sync_file_range    314
+#define __NR_tee                315
+#define __NR_vmsplice           316
+#define __NR_move_pages         317
+#define __NR_getcpu             318
+#define __NR_epoll_pwait        319
+#define __NR_utimensat          320
+#define __NR_signalfd           321
+#define __NR_timerfd_create     322
+#define __NR_eventfd            323
+#define __NR_fallocate          324
+#define __NR_timerfd_settime    325
+#define __NR_timerfd_gettime    326
+#define __NR_signalfd4          327
+#define __NR_eventfd2           328
+#define __NR_epoll_create1      329
+#define __NR_dup3               330
+#define __NR_pipe2              331
+#define __NR_inotify_init1      332
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 333
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+/* #define __ARCH_WANT_OLD_READDIR */
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+/* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_PAUSE
+/* #define __ARCH_WANT_SYS_SGETMASK */
+/* #define __ARCH_WANT_SYS_SIGNAL */
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+/* #define __ARCH_WANT_SYS_SIGPENDING */
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H_ */
diff --git a/arch/frv/include/asm/user.h b/arch/frv/include/asm/user.h
new file mode 100644
index 000000000000..82fa8fab64ae
--- /dev/null
+++ b/arch/frv/include/asm/user.h
@@ -0,0 +1,80 @@
+/* user.h: FR-V core file format stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/registers.h>
+
+/* Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the 'trad-core' bfd).  There are quite a number of
+ * obstacles to being able to view the contents of the floating point
+ * registers, and until these are solved you will not be able to view
+ * the contents of them.  Actually, you can read in the core file and
+ * look at the contents of the user struct to find out what the
+ * floating point registers contain.
+ *
+ * The actual file contents are as follows:
+ * UPAGE:
+ *   1 page consisting of a user struct that tells gdb what is present
+ *   in the file.  Directly after this is a copy of the task_struct,
+ *   which is currently not used by gdb, but it may come in useful at
+ *   some point.  All of the registers are stored as part of the
+ *   upage.  The upage should always be only one page.
+ *
+ * DATA:
+ *   The data area is stored.  We use current->end_text to
+ *   current->brk to pick up all of the user variables, plus any
+ *   memory that may have been malloced.  No attempt is made to
+ *   determine if a page is demand-zero or if a page is totally
+ *   unused, we just cover the entire range.  All of the addresses are
+ *   rounded in such a way that an integral number of pages is
+ *   written.
+ *
+ * STACK:
+ *   We need the stack information in order to get a meaningful
+ *   backtrace.  We need to write the data from (esp) to
+ *   current->start_stack, so we round each of these off in order to
+ *   be able to write an integer number of pages.  The minimum core
+ *   file size is 3 pages, or 12288 bytes.
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ * this will be used by gdb to figure out where the data and stack segments
+ *  are within the file, and what virtual addresses to use.
+ */
+struct user {
+        /* We start with the registers, to mimic the way that "memory" is returned
+         * from the ptrace(3,...) function.  */
+        struct user_context     regs;
+
+        /* The rest of this junk is to help gdb figure out what goes where */
+        unsigned long           u_tsize;        /* Text segment size (pages). */
+        unsigned long           u_dsize;        /* Data segment size (pages). */
+        unsigned long           u_ssize;        /* Stack segment size (pages). */
+        unsigned long           start_code;     /* Starting virtual address of text. */
+        unsigned long           start_stack;    /* Starting virtual address of stack area.
+                                                 * This is actually the bottom of the stack,
+                                                 * the top of the stack is always found in the
+                                                 * esp register.  */
+        long int                signal;         /* Signal that caused the core dump. */
+
+        unsigned long           magic;          /* To uniquely identify a core file */
+        char                    u_comm[32];     /* User command that was responsible */
+};
+
+#define NBPG                    PAGE_SIZE
+#define UPAGES                  1
+#define HOST_TEXT_START_ADDR    (u.start_code)
+#define HOST_STACK_END_ADDR     (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/arch/frv/include/asm/vga.h b/arch/frv/include/asm/vga.h
new file mode 100644
index 000000000000..a702c800a229
--- /dev/null
+++ b/arch/frv/include/asm/vga.h
@@ -0,0 +1,17 @@
+/* vga.h: VGA register stuff
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h
new file mode 100644
index 000000000000..59788fa2a813
--- /dev/null
+++ b/arch/frv/include/asm/virtconvert.h
@@ -0,0 +1,41 @@
+/* virtconvert.h: virtual/physical/page address convertion
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_VIRTCONVERT_H
+#define _ASM_VIRTCONVERT_H
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#ifdef CONFIG_MMU
+
+#define phys_to_virt(vaddr)     ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET))
+#define virt_to_phys(vaddr)     ((unsigned long) (vaddr) - PAGE_OFFSET)
+
+#else
+
+#define phys_to_virt(vaddr)     ((void *) (vaddr))
+#define virt_to_phys(vaddr)     ((unsigned long) (vaddr))
+
+#endif
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#define __page_address(page)    (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page)      virt_to_phys((void *)__page_address(page))
+
+#endif
+#endif
diff --git a/arch/frv/include/asm/xor.h b/arch/frv/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/frv/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 9015979ebe0f..10a9eb05f74d 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -308,11 +308,13 @@
 #define __NR_dup3                       1316
 #define __NR_pipe2                      1317
 #define __NR_inotify_init1              1318
+#define __NR_preadv                     1319
+#define __NR_pwritev                    1320
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls                     295 /* length of syscall table */
+#define NR_syscalls                     297 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 8dc69669586a..7bebac0e1d44 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1803,6 +1803,8 @@ sys_call_table:
         data8 sys_dup3
         data8 sys_pipe2
         data8 sys_inotify_init1
+        data8 sys_preadv
+        data8 sys_pwritev                       // 1320
 
         .org sys_call_table + 8*NR_syscalls     // guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644
index 000000000000..8cc312b5d4dc
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,141 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/Microblaze Kernel Configuration"
+
+config MICROBLAZE
+        def_bool y
+        select HAVE_LMB
+
+config SWAP
+        def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+        def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+
+config ARCH_HAS_ILOG2_U32
+        def_bool n
+
+config ARCH_HAS_ILOG2_U64
+        def_bool n
+
+config GENERIC_FIND_NEXT_BIT
+        def_bool y
+
+config GENERIC_HWEIGHT
+        def_bool y
+
+config GENERIC_HARDIRQS
+        def_bool y
+
+config GENERIC_IRQ_PROBE
+        def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+        def_bool y
+
+config GENERIC_TIME
+        def_bool y
+
+config GENERIC_TIME_VSYSCALL
+        def_bool n
+
+config GENERIC_CLOCKEVENTS
+        def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+        def_bool y
+
+config PCI
+        depends on !MMU
+        def_bool n
+
+config NO_DMA
+        depends on !MMU
+        def_bool n
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/microblaze/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+source kernel/time/Kconfig
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+        def_bool n
+
+config NO_MMU
+        bool
+        depends on !MMU
+        default y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+        bool "Default bootloader kernel arguments"
+
+config CMDLINE
+        string "Default kernel command string"
+        depends on CMDLINE_BOOL
+        default "console=ttyUL0,115200"
+        help
+          On some architectures there is currently no way for the boot loader
+          to pass arguments to the kernel. For these architectures, you should
+          supply some command-line options at build time by entering them
+          here.
+
+config CMDLINE_FORCE
+        bool "Force default kernel command string"
+        depends on CMDLINE_BOOL
+        default n
+        help
+          Set this to have arguments from the default kernel command string
+          override those passed by the boot loader.
+
+config OF
+        def_bool y
+
+config OF_DEVICE
+        def_bool y
+
+config PROC_DEVICETREE
+        bool "Support for device tree in /proc"
+        depends on PROC_FS
+        help
+          This option adds a device-tree directory under /proc which contains
+          an image of the device tree that the kernel copies from Open
+          Firmware or other boot firmware. If unsure, say Y here.
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Exectuable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/microblaze/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
new file mode 100644
index 000000000000..242cd35bdb4b
--- /dev/null
+++ b/arch/microblaze/Kconfig.debug
@@ -0,0 +1,26 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+        bool "Early printk function for kernel"
+        default n
+        help
+          This option turns on/off early printk messages to console.
+          First Uartlite node is taken.
+
+config HEART_BEAT
+        bool "Heart beat function for kernel"
+        default n
+        help
+          This option turns on/off heart beat kernel functionality.
+          First GPIO node is taken.
+
+config DEBUG_BOOTMEM
+        depends on DEBUG_KERNEL
+        bool "Debug BOOTMEM initialization"
+
+endmenu
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
new file mode 100644
index 000000000000..0dcbb9832974
--- /dev/null
+++ b/arch/microblaze/Makefile
@@ -0,0 +1,69 @@
+UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+
+# What CPU vesion are we building for, and crack it open
+# as major.minor.rev
+CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
+CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+
+export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
+
+# Use cpu-related CONFIG_ vars to set compile options.
+
+# Work out HW multipler support.  This is icky.
+# 1. Spartan2 has no HW multiplers.
+# 2. MicroBlaze v3.x always uses them, except in Spartan 2
+# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
+ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
+  ifeq ($(CPU_MAJOR),3)
+    CPUFLAGS-1 += -mno-xl-soft-mul
+  else
+    # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
+    CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
+    CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
+  endif
+endif
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare
+
+CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
+
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
+CFLAGS += $(CPUFLAGS-1)
+CFLAGS += $(CPUFLAGS-2)
+
+# r31 holds current when in kernel mode
+CFLAGS += -ffixed-r31
+
+LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
+
+LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+
+head-y          := arch/microblaze/kernel/head.o
+libs-y          += arch/microblaze/lib/ $(LIBGCC)
+core-y          += arch/microblaze/kernel/ arch/microblaze/mm/ \
+                   arch/microblaze/platform/
+
+boot := arch/$(ARCH)/boot
+
+# defines filename extension depending memory management type
+ifeq ($(CONFIG_MMU),)
+MMUEXT          := -nommu
+endif
+export  MMUEXT
+
+all: linux.bin
+
+archclean:
+        $(Q)$(MAKE) $(clean)=$(boot)
+
+linux.bin linux.bin.gz: vmlinux
+        $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+define archhelp
+  echo  '* linux.bin    - Create raw binary'
+  echo  '  linux.bin.gz - Create compressed raw binary'
+endef
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
new file mode 100644
index 000000000000..844edf406d34
--- /dev/null
+++ b/arch/microblaze/boot/Makefile
@@ -0,0 +1,17 @@
+#
+# arch/microblaze/boot/Makefile
+#
+
+targets := linux.bin linux.bin.gz
+
+OBJCOPYFLAGS_linux.bin  := -O binary
+
+$(obj)/linux.bin: vmlinux FORCE
+        $(call if_changed,objcopy)
+        @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
+        $(call if_changed,gzip)
+        @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+clean-kernel += linux.bin linux.bin.gz
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
new file mode 100644
index 000000000000..beb7ecd72793
--- /dev/null
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -0,0 +1,804 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29
+# Tue Mar 24 10:23:20 2009
+#
+CONFIG_MICROBLAZE=y
+# CONFIG_SWAP is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_PCI is not set
+# CONFIG_NO_DMA is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform options
+#
+CONFIG_PLATFORM_GENERIC=y
+# CONFIG_SELFMOD is not set
+# CONFIG_OPT_LIB_FUNCTION is not set
+# CONFIG_ALLOW_EDIT_AUTO is not set
+CONFIG_KERNEL_BASE_ADDR=0x90000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_MMU is not set
+CONFIG_NO_MMU=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_OF=y
+CONFIG_OF_DEVICE=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+
+#
+# Exectuable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_HEART_BEAT=y
+# CONFIG_DEBUG_BOOTMEM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
new file mode 100644
index 000000000000..31820dfef56b
--- /dev/null
+++ b/arch/microblaze/include/asm/Kbuild
@@ -0,0 +1,26 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += linkage.h
+header-y += msgbuf.h
+header-y += poll.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += socket.h
+header-y += sockios.h
+header-y += statfs.h
+header-y += stat.h
+header-y += termbits.h
+header-y += ucontext.h
+
+unifdef-y += cputable.h
+unifdef-y += elf.h
+unifdef-y += termios.h
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
new file mode 100644
index 000000000000..a448d94ab721
--- /dev/null
+++ b/arch/microblaze/include/asm/atomic.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_ATOMIC_H
+#define _ASM_MICROBLAZE_ATOMIC_H
+
+#include <linux/types.h>
+#include <linux/compiler.h> /* likely */
+#include <asm/system.h> /* local_irq_XXX and friends */
+
+#define ATOMIC_INIT(i)          { (i) }
+#define atomic_read(v)          ((v)->counter)
+#define atomic_set(v, i)        (((v)->counter) = (i))
+
+#define atomic_inc(v)           (atomic_add_return(1, (v)))
+#define atomic_dec(v)           (atomic_sub_return(1, (v)))
+
+#define atomic_add(i, v)        (atomic_add_return(i, (v)))
+#define atomic_sub(i, v)        (atomic_sub_return(i, (v)))
+
+#define atomic_inc_return(v)    (atomic_add_return(1, (v)))
+#define atomic_dec_return(v)    (atomic_sub_return(1, (v)))
+
+#define atomic_inc_and_test(v)  (atomic_add_return(1, (v)) == 0)
+#define atomic_dec_and_test(v)  (atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc_not_zero(v)  (atomic_add_unless((v), 1, 0))
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+        int ret;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        ret = v->counter;
+        if (likely(ret == old))
+                v->counter = new;
+        local_irq_restore(flags);
+
+        return ret;
+}
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+        int c, old;
+
+        c = atomic_read(v);
+        while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+                c = old;
+        return c != u;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+        *addr &= ~mask;
+        local_irq_restore(flags);
+}
+
+/**
+ * atomic_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int val;
+
+        local_irq_save(flags);
+        val = v->counter;
+        v->counter = val += i;
+        local_irq_restore(flags);
+
+        return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+        return atomic_add_return(-i, v);
+}
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static inline int atomic_dec_if_positive(atomic_t *v)
+{
+        unsigned long flags;
+        int res;
+
+        local_irq_save(flags);
+        res = v->counter - 1;
+        if (res >= 0)
+                v->counter = res;
+        local_irq_restore(flags);
+
+        return res;
+}
+
+#define atomic_add_negative(a, v)       (atomic_add_return((a), (v)) < 0)
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/auxvec.h b/arch/microblaze/include/asm/auxvec.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/microblaze/include/asm/auxvec.h
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
new file mode 100644
index 000000000000..d6df1fd4e1e8
--- /dev/null
+++ b/arch/microblaze/include/asm/bitops.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_BITOPS_H
+#define _ASM_MICROBLAZE_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <asm/byteorder.h> /* swab32 */
+#include <asm/system.h> /* save_flags */
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+#include <asm-generic/bitops.h>
+#include <asm-generic/bitops/__fls.h>
+
+#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
new file mode 100644
index 000000000000..8eb2cdde11d7
--- /dev/null
+++ b/arch/microblaze/include/asm/bug.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_BUG_H
+#define _ASM_MICROBLAZE_BUG_H
+
+#include <linux/kernel.h>
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
new file mode 100644
index 000000000000..f2c6593653fb
--- /dev/null
+++ b/arch/microblaze/include/asm/bugs.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_BUGS_H
+#define _ASM_MICROBLAZE_BUGS_H
+
+static inline void check_bugs(void)
+{
+        /* nothing to do */
+}
+
+#endif /* _ASM_MICROBLAZE_BUGS_H */
diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/asm/byteorder.h
new file mode 100644
index 000000000000..ce9c58732ffc
--- /dev/null
+++ b/arch/microblaze/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_MICROBLAZE_BYTEORDER_H
+#define _ASM_MICROBLAZE_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_MICROBLAZE_BYTEORDER_H */
diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h
new file mode 100644
index 000000000000..c4c64b43c074
--- /dev/null
+++ b/arch/microblaze/include/asm/cache.h
@@ -0,0 +1,45 @@
+/*
+ * Cache operations
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHE_H
+#define _ASM_MICROBLAZE_CACHE_H
+
+#include <asm/registers.h>
+
+#define L1_CACHE_SHIFT  2
+/* word-granular cache in microblaze */
+#define L1_CACHE_BYTES  (1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+void _enable_icache(void);
+void _disable_icache(void);
+void _invalidate_icache(unsigned int addr);
+
+#define __enable_icache()               _enable_icache()
+#define __disable_icache()              _disable_icache()
+#define __invalidate_icache(addr)       _invalidate_icache(addr)
+
+void _enable_dcache(void);
+void _disable_dcache(void);
+void _invalidate_dcache(unsigned int addr);
+
+#define __enable_dcache()               _enable_dcache()
+#define __disable_dcache()              _disable_dcache()
+#define __invalidate_dcache(addr)       _invalidate_dcache(addr)
+
+/* FIXME - I don't think this is right */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE)
+#endif
+
+#endif /* _ASM_MICROBLAZE_CACHE_H */
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
new file mode 100644
index 000000000000..3300b785049b
--- /dev/null
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2007 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * based on v850 version which was
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHEFLUSH_H
+#define _ASM_MICROBLAZE_CACHEFLUSH_H
+
+/* Somebody depends on this; sigh... */
+#include <linux/mm.h>
+
+/*
+ * Cache handling functions.
+ * Microblaze has a write-through data cache, meaning that the data cache
+ * never needs to be flushed.  The only flushing operations that are
+ * implemented are to invalidate the instruction cache.  These are called
+ * after loading a user application into memory, we must invalidate the
+ * instruction cache to make sure we don't fetch old, bad code.
+ */
+
+/* FIXME for LL-temac driver */
+#define invalidate_dcache_range(start, end) \
+                        __invalidate_dcache_range(start, end)
+
+#define flush_cache_all()                       __invalidate_cache_all()
+#define flush_cache_mm(mm)                      do { } while (0)
+#define flush_cache_range(vma, start, end)      __invalidate_cache_all()
+#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
+
+#define flush_dcache_range(start, end)  __invalidate_dcache_range(start, end)
+#define flush_dcache_page(page)                 do { } while (0)
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+
+#define flush_icache_range(start, len)  __invalidate_icache_range(start, len)
+#define flush_icache_page(vma, pg)              do { } while (0)
+
+#define flush_cache_vmap(start, end)            do { } while (0)
+#define flush_cache_vunmap(start, end)          do { } while (0)
+
+struct page;
+struct mm_struct;
+struct vm_area_struct;
+
+/* see arch/microblaze/kernel/cache.c */
+extern void __invalidate_icache_all(void);
+extern void __invalidate_icache_range(unsigned long start, unsigned long end);
+extern void __invalidate_icache_page(struct vm_area_struct *vma,
+                                struct page *page);
+extern void __invalidate_icache_user_range(struct vm_area_struct *vma,
+                                struct page *page,
+                                unsigned long adr, int len);
+extern void __invalidate_cache_sigtramp(unsigned long addr);
+
+extern void __invalidate_dcache_all(void);
+extern void __invalidate_dcache_range(unsigned long start, unsigned long end);
+extern void __invalidate_dcache_page(struct vm_area_struct *vma,
+                                struct page *page);
+extern void __invalidate_dcache_user_range(struct vm_area_struct *vma,
+                                struct page *page,
+                                unsigned long adr, int len);
+
+extern inline void __invalidate_cache_all(void)
+{
+        __invalidate_icache_all();
+        __invalidate_dcache_all();
+}
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy((dst), (src), (len)); \
+        flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+        memcpy((dst), (src), (len))
+
+#endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
new file mode 100644
index 000000000000..92b30762ce59
--- /dev/null
+++ b/arch/microblaze/include/asm/checksum.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CHECKSUM_H
+#define _ASM_MICROBLAZE_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+                   unsigned short proto, __wsum sum)
+{
+        __asm__("add %0, %0, %1\n\t"
+                "addc %0, %0, %2\n\t"
+                "addc %0, %0, %3\n\t"
+                "addc %0, %0, r0\n\t"
+                : "+&d" (sum)
+                : "d" (saddr), "d" (daddr), "d" (len + proto));
+
+        return sum;
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
+                                        int len, int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)   \
+        csum_partial_copy((src), (dst), (len), (sum))
+
+/*
+ *      This is a version of ip_compute_csum() optimized for IP headers,
+ *      which always checksum on 4 octet boundaries.
+ *
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ *      Fold a partial checksum
+ */
+static inline __sum16 csum_fold(unsigned int sum)
+{
+        sum = (sum & 0xffff) + (sum >> 16);
+        sum = (sum & 0xffff) + (sum >> 16);
+        return ~sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
+
+#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/clinkage.h b/arch/microblaze/include/asm/clinkage.h
new file mode 100644
index 000000000000..9e218435a55c
--- /dev/null
+++ b/arch/microblaze/include/asm/clinkage.h
@@ -0,0 +1 @@
+#include <linux/linkage.h>
diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h
new file mode 100644
index 000000000000..52f28f6dc4eb
--- /dev/null
+++ b/arch/microblaze/include/asm/cpuinfo.h
@@ -0,0 +1,102 @@
+/*
+ * Generic support for queying CPU info
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CPUINFO_H
+#define _ASM_MICROBLAZE_CPUINFO_H
+
+#include <asm/prom.h>
+
+/* CPU Version and FPGA Family code conversion table type */
+struct cpu_ver_key {
+        const char *s;
+        const unsigned k;
+};
+
+extern const struct cpu_ver_key cpu_ver_lookup[];
+
+struct family_string_key {
+        const char *s;
+        const unsigned k;
+};
+
+extern const struct family_string_key family_string_lookup[];
+
+struct cpuinfo {
+        /* Core CPU configuration */
+        u32 use_instr;
+        u32 use_mult;
+        u32 use_fpu;
+        u32 use_exc;
+        u32 ver_code;
+        u32 mmu;
+
+        /* CPU caches */
+        u32 use_icache;
+        u32 icache_tagbits;
+        u32 icache_write;
+        u32 icache_line;
+        u32 icache_size;
+        unsigned long icache_base;
+        unsigned long icache_high;
+
+        u32 use_dcache;
+        u32 dcache_tagbits;
+        u32 dcache_write;
+        u32 dcache_line;
+        u32 dcache_size;
+        unsigned long dcache_base;
+        unsigned long dcache_high;
+
+        /* Bus connections */
+        u32 use_dopb;
+        u32 use_iopb;
+        u32 use_dlmb;
+        u32 use_ilmb;
+        u32 num_fsl;
+
+        /* CPU interrupt line info */
+        u32 irq_edge;
+        u32 irq_positive;
+
+        u32 area_optimised;
+
+        /* HW debug support */
+        u32 hw_debug;
+        u32 num_pc_brk;
+        u32 num_rd_brk;
+        u32 num_wr_brk;
+        u32 cpu_clock_freq; /* store real freq of cpu */
+        u32 freq_div_hz; /* store freq/HZ */
+
+        /* FPGA family */
+        u32 fpga_family_code;
+
+        /* User define */
+        u32 pvr_user1;
+        u32 pvr_user2;
+};
+
+extern struct cpuinfo cpuinfo;
+
+/* fwd declarations of the various CPUinfo populators */
+void setup_cpuinfo(void);
+
+void set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu);
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu);
+
+static inline unsigned int fcpu(struct device_node *cpu, char *n)
+{
+        int *val;
+        return (val = (int *) of_get_property(cpu, n, NULL)) ? *val : 0;
+}
+
+#endif /* _ASM_MICROBLAZE_CPUINFO_H */
diff --git a/arch/microblaze/include/asm/cputable.h b/arch/microblaze/include/asm/cputable.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/microblaze/include/asm/cputable.h
diff --git a/arch/microblaze/include/asm/cputime.h b/arch/microblaze/include/asm/cputime.h
new file mode 100644
index 000000000000..6d68ad7e0ea3
--- /dev/null
+++ b/arch/microblaze/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
new file mode 100644
index 000000000000..8375ea991e26
--- /dev/null
+++ b/arch/microblaze/include/asm/current.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CURRENT_H
+#define _ASM_MICROBLAZE_CURRENT_H
+
+# ifndef __ASSEMBLY__
+/*
+ * Dedicate r31 to keeping the current task pointer
+ */
+register struct task_struct *current asm("r31");
+
+# define get_current()  current
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_CURRENT_H */
diff --git a/arch/microblaze/include/asm/delay.h b/arch/microblaze/include/asm/delay.h
new file mode 100644
index 000000000000..05b7d39e4391
--- /dev/null
+++ b/arch/microblaze/include/asm/delay.h
@@ -0,0 +1,72 @@
+/*
+ * include/asm-microblaze/delay.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2007 John Williams
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_DELAY_H
+#define _ASM_MICROBLAZE_DELAY_H
+
+extern inline void __delay(unsigned long loops)
+{
+        asm volatile ("# __delay                \n\t"           \
+                        "1: addi        %0, %0, -1\t\n"         \
+                        "bneid  %0, 1b          \t\n"           \
+                        "nop                    \t\n"
+                        : "=r" (loops)
+                        : "0" (loops));
+}
+
+/*
+ * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
+ * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
+ *
+ * The mul instruction gives us loops = (a * b) / 2^32.
+ * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
+ * because this lets us support a wide range of HZ and
+ * loops_per_jiffy values without either a or b overflowing 2^32.
+ * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
+ * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
+ * (which corresponds to ~3800 bogomips at HZ = 100).
+ * -- paulus
+ */
+#define __MAX_UDELAY    (226050910UL/HZ)        /* maximum udelay argument */
+#define __MAX_NDELAY    (4294967295UL/HZ)       /* maximum ndelay argument */
+
+extern unsigned long loops_per_jiffy;
+
+extern inline void __udelay(unsigned int x)
+{
+
+        unsigned long long tmp =
+                (unsigned long long)x * (unsigned long long)loops_per_jiffy \
+                        * 226LL;
+        unsigned loops = tmp >> 32;
+
+/*
+        __asm__("mulxuu %0,%1,%2" : "=r" (loops) :
+                "r" (x), "r" (loops_per_jiffy * 226));
+*/
+        __delay(loops);
+}
+
+extern void __bad_udelay(void);         /* deliberately undefined */
+extern void __bad_ndelay(void);         /* deliberately undefined */
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+        ((n) > __MAX_UDELAY ? __bad_udelay() : __udelay((n) * (19 * HZ))) : \
+        __udelay((n) * (19 * HZ)))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+        ((n) > __MAX_NDELAY ? __bad_ndelay() : __udelay((n) * HZ)) : \
+        __udelay((n) * HZ))
+
+#define muldiv(a, b, c)         (((a)*(b))/(c))
+
+#endif /* _ASM_MICROBLAZE_DELAY_H */
diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h
new file mode 100644
index 000000000000..c042830793ed
--- /dev/null
+++ b/arch/microblaze/include/asm/device.h
@@ -0,0 +1,21 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_DEVICE_H
+#define _ASM_MICROBLAZE_DEVICE_H
+
+struct device_node;
+
+struct dev_archdata {
+        /* Optional pointer to an OF device node */
+        struct device_node      *of_node;
+};
+
+#endif /* _ASM_MICROBLAZE_DEVICE_H */
+
+
diff --git a/arch/microblaze/include/asm/div64.h b/arch/microblaze/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/microblaze/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..17336252a9b8
--- /dev/null
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
+#define _ASM_MICROBLAZE_DMA_MAPPING_H
+
+#include <asm/cacheflush.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+
+struct scatterlist;
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+/* FIXME */
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+        return 1;
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+        unsigned long offset, size_t size,
+        enum dma_data_direction direction)
+{
+        BUG();
+        return 0;
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+        enum dma_data_direction direction)
+{
+        BUG();
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+        enum dma_data_direction direction)
+{
+        BUG();
+        return 0;
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+        enum dma_data_direction direction)
+{
+        BUG();
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+                        enum dma_data_direction direction)
+{
+        BUG();
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+                size_t size, enum dma_data_direction direction)
+{
+        BUG();
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+                enum dma_data_direction direction)
+{
+        BUG();
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+                enum dma_data_direction direction)
+{
+        BUG();
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+        return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+                                dma_addr_t *dma_handle, int flag)
+{
+        return NULL; /* consistent_alloc(flag, size, dma_handle); */
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+                        void *vaddr, dma_addr_t dma_handle)
+{
+        BUG();
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+        enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+
+        return virt_to_bus(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+                                    size_t size,
+                                    enum dma_data_direction direction)
+{
+        switch (direction) {
+        case DMA_FROM_DEVICE:
+                flush_dcache_range((unsigned)dma_addr,
+                        (unsigned)dma_addr + size);
+                        /* Fall through */
+        case DMA_TO_DEVICE:
+                break;
+        default:
+                BUG();
+        }
+}
+
+#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
new file mode 100644
index 000000000000..0967fa04fc5e
--- /dev/null
+++ b/arch/microblaze/include/asm/dma.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_H
+#define _ASM_MICROBLAZE_DMA_H
+
+/* we don't have dma address limit. define it as zero to be
+ * unlimited. */
+#define MAX_DMA_ADDRESS         (0)
+
+#endif /* _ASM_MICROBLAZE_DMA_H */
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
new file mode 100644
index 000000000000..81337f241347
--- /dev/null
+++ b/arch/microblaze/include/asm/elf.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_ELF_H
+#define _ASM_MICROBLAZE_ELF_H
+
+/*
+ * Note there is no "official" ELF designation for Microblaze.
+ * I've snaffled the value from the microblaze binutils source code
+ * /binutils/microblaze/include/elf/microblaze.h
+ */
+#define EM_XILINX_MICROBLAZE    0xbaab
+#define ELF_ARCH                EM_XILINX_MICROBLAZE
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)       ((x)->e_machine == EM_XILINX_MICROBLAZE)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+
+#endif /* _ASM_MICROBLAZE_ELF_H */
diff --git a/arch/microblaze/include/asm/emergency-restart.h b/arch/microblaze/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3711bd9d50bd
--- /dev/null
+++ b/arch/microblaze/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
new file mode 100644
index 000000000000..7f57e42ee467
--- /dev/null
+++ b/arch/microblaze/include/asm/entry.h
@@ -0,0 +1,35 @@
+/*
+ * Definitions used by low-level trap handlers
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2007 - 2008 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_ENTRY_H
+#define _ASM_MICROBLAZE_ENTRY_H
+
+#include <asm/percpu.h>
+#include <asm/ptrace.h>
+
+/*
+ * These are per-cpu variables required in entry.S, among other
+ * places
+ */
+
+#define PER_CPU(var) per_cpu__##var
+
+# ifndef __ASSEMBLY__
+DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
+DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
+DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
+DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/errno.h b/arch/microblaze/include/asm/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/arch/microblaze/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
new file mode 100644
index 000000000000..4cdd2159f470
--- /dev/null
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -0,0 +1,96 @@
+/*
+ * Preliminary support for HW exception handing for Microblaze
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_EXCEPTIONS_H
+#define _ASM_MICROBLAZE_EXCEPTIONS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/* Macros to enable and disable HW exceptions in the MSR */
+/* Define MSR enable bit for HW exceptions */
+#define HWEX_MSR_BIT (1 << 8)
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#define __enable_hw_exceptions()                                        \
+        __asm__ __volatile__ (" msrset  r0, %0;                         \
+                                nop;"                                   \
+                                :                                       \
+                                : "i" (HWEX_MSR_BIT)                    \
+                                : "memory")
+
+#define __disable_hw_exceptions()                                       \
+        __asm__ __volatile__ (" msrclr r0, %0;                          \
+                                nop;"                                   \
+                                :                                       \
+                                : "i" (HWEX_MSR_BIT)                    \
+                                : "memory")
+#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+#define __enable_hw_exceptions()                                        \
+        __asm__ __volatile__ ("                                         \
+                                mfs     r12, rmsr;                      \
+                                nop;                                    \
+                                ori     r12, r12, %0;                   \
+                                mts     rmsr, r12;                      \
+                                nop;"                                   \
+                                :                                       \
+                                : "i" (HWEX_MSR_BIT)                    \
+                                : "memory", "r12")
+
+#define __disable_hw_exceptions()                                       \
+        __asm__ __volatile__ ("                                         \
+                                mfs     r12, rmsr;                      \
+                                nop;                                    \
+                                andi    r12, r12, ~%0;                  \
+                                mts     rmsr, r12;                      \
+                                nop;"                                   \
+                                :                                       \
+                                : "i" (HWEX_MSR_BIT)                    \
+                                : "memory", "r12")
+#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+                                                        int fsr, int addr);
+
+#if defined(CONFIG_XMON)
+extern void xmon(struct pt_regs *regs);
+extern int xmon_bpt(struct pt_regs *regs);
+extern int xmon_sstep(struct pt_regs *regs);
+extern int xmon_iabr_match(struct pt_regs *regs);
+extern int xmon_dabr_match(struct pt_regs *regs);
+extern void (*xmon_fault_handler)(struct pt_regs *regs);
+
+void (*debugger)(struct pt_regs *regs) = xmon;
+int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
+int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
+int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
+int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
+void (*debugger_fault_handler)(struct pt_regs *regs);
+#elif defined(CONFIG_KGDB)
+void (*debugger)(struct pt_regs *regs);
+int (*debugger_bpt)(struct pt_regs *regs);
+int (*debugger_sstep)(struct pt_regs *regs);
+int (*debugger_iabr_match)(struct pt_regs *regs);
+int (*debugger_dabr_match)(struct pt_regs *regs);
+void (*debugger_fault_handler)(struct pt_regs *regs);
+#else
+#define debugger(regs)                  do { } while (0)
+#define debugger_bpt(regs)              0
+#define debugger_sstep(regs)            0
+#define debugger_iabr_match(regs)       0
+#define debugger_dabr_match(regs)       0
+#define debugger_fault_handler          ((void (*)(struct pt_regs *))0)
+#endif
+
+#endif /*__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */
diff --git a/arch/microblaze/include/asm/fcntl.h b/arch/microblaze/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/microblaze/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h
new file mode 100644
index 000000000000..acf0da543ef1
--- /dev/null
+++ b/arch/microblaze/include/asm/flat.h
@@ -0,0 +1,90 @@
+/*
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_FLAT_H
+#define _ASM_MICROBLAZE_FLAT_H
+
+#include <asm/unaligned.h>
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack()      0
+#define flat_old_ram_flag(flags)        (flags)
+#define flat_reloc_valid(reloc, size)   ((reloc) <= (size))
+#define flat_set_persistent(relval, p)          0
+
+/*
+ * Microblaze works a little differently from other arches, because
+ * of the MICROBLAZE_64 reloc type. Here, a 32 bit address is split
+ * over two instructions, an 'imm' instruction which provides the top
+ * 16 bits, then the instruction "proper" which provides the low 16
+ * bits.
+ */
+
+/*
+ * Crack open a symbol reference and extract the address to be
+ * relocated. rp is a potentially unaligned pointer to the
+ * reference
+ */
+
+static inline unsigned long
+flat_get_addr_from_rp(unsigned long *rp, unsigned long relval,
+                        unsigned long flags, unsigned long *persistent)
+{
+        unsigned long addr;
+        (void)flags;
+
+        /* Is it a split 64/32 reference? */
+        if (relval & 0x80000000) {
+                /* Grab the two halves of the reference */
+                unsigned long val_hi, val_lo;
+
+                val_hi = get_unaligned(rp);
+                val_lo = get_unaligned(rp+1);
+
+                /* Crack the address out */
+                addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff);
+        } else {
+                /* Get the address straight out */
+                addr = get_unaligned(rp);
+        }
+
+        return addr;
+}
+
+/*
+ * Insert an address into the symbol reference at rp. rp is potentially
+ * unaligned.
+ */
+
+static inline void
+flat_put_addr_at_rp(unsigned long *rp, unsigned long addr, unsigned long relval)
+{
+        /* Is this a split 64/32 reloc? */
+        if (relval & 0x80000000) {
+                /* Get the two "halves" */
+                unsigned long val_hi = get_unaligned(rp);
+                unsigned long val_lo = get_unaligned(rp + 1);
+
+                /* insert the address */
+                val_hi = (val_hi & 0xffff0000) | addr >> 16;
+                val_lo = (val_lo & 0xffff0000) | (addr & 0xffff);
+
+                /* store the two halves back into memory */
+                put_unaligned(val_hi, rp);
+                put_unaligned(val_lo, rp+1);
+        } else {
+                /* Put it straight in, no messing around */
+                put_unaligned(addr, rp);
+        }
+}
+
+#define flat_get_relocate_addr(rel)     (rel & 0x7fffffff)
+
+#endif /* _ASM_MICROBLAZE_FLAT_H */
diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h
new file mode 100644
index 000000000000..0b745828f42b
--- /dev/null
+++ b/arch/microblaze/include/asm/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
new file mode 100644
index 000000000000..ea04632399d8
--- /dev/null
+++ b/arch/microblaze/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+        return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+        __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+        return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+        return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+        return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
new file mode 100644
index 000000000000..0f2d6b013e11
--- /dev/null
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_HARDIRQ_H
+#define _ASM_MICROBLAZE_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/current.h>
+#include <linux/ptrace.h>
+
+/* should be defined in each interrupt controller driver */
+extern unsigned int get_irq(struct pt_regs *regs);
+
+typedef struct {
+        unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+void ack_bad_irq(unsigned int irq);
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/hw_irq.h b/arch/microblaze/include/asm/hw_irq.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/microblaze/include/asm/hw_irq.h
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
new file mode 100644
index 000000000000..cfab0342588d
--- /dev/null
+++ b/arch/microblaze/include/asm/io.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IO_H
+#define _ASM_MICROBLAZE_IO_H
+
+#include <asm/byteorder.h>
+#include <asm/page.h>
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+        return *(volatile unsigned char __force *)addr;
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+        return *(volatile unsigned short __force *)addr;
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+        return *(volatile unsigned int __force *)addr;
+}
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+        return *(volatile unsigned long __force *)addr;
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+        *(volatile unsigned char __force *)addr = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+        *(volatile unsigned short __force *)addr = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+        *(volatile unsigned int __force *)addr = v;
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+        *(volatile unsigned long __force *)addr = v;
+}
+
+/*
+ * read (readb, readw, readl, readq) and write (writeb, writew,
+ * writel, writeq) accessors are for PCI and thus littel endian.
+ * Linux 2.4 for Microblaze had this wrong.
+ */
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+        return *(volatile unsigned char __force *)addr;
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+        return le16_to_cpu(*(volatile unsigned short __force *)addr);
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+        return le32_to_cpu(*(volatile unsigned int __force *)addr);
+}
+static inline void writeb(unsigned char v, volatile void __iomem *addr)
+{
+        *(volatile unsigned char __force *)addr = v;
+}
+static inline void writew(unsigned short v, volatile void __iomem *addr)
+{
+        *(volatile unsigned short __force *)addr = cpu_to_le16(v);
+}
+static inline void writel(unsigned int v, volatile void __iomem *addr)
+{
+        *(volatile unsigned int __force *)addr = cpu_to_le32(v);
+}
+
+/* ioread and iowrite variants. thease are for now same as __raw_
+ * variants of accessors. we might check for endianess in the feature
+ */
+#define ioread8(addr)           __raw_readb((u8 *)(addr))
+#define ioread16(addr)          __raw_readw((u16 *)(addr))
+#define ioread32(addr)          __raw_readl((u32 *)(addr))
+#define iowrite8(v, addr)       __raw_writeb((u8)(v), (u8 *)(addr))
+#define iowrite16(v, addr)      __raw_writew((u16)(v), (u16 *)(addr))
+#define iowrite32(v, addr)      __raw_writel((u32)(v), (u32 *)(addr))
+
+/* These are the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl, the "string" versions
+ * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
+ * inb_p/inw_p/...
+ * The macros don't do byte-swapping.
+ */
+#define inb(port)               readb((u8 *)((port)))
+#define outb(val, port)         writeb((val), (u8 *)((unsigned long)(port)))
+#define inw(port)               readw((u16 *)((port)))
+#define outw(val, port)         writew((val), (u16 *)((unsigned long)(port)))
+#define inl(port)               readl((u32 *)((port)))
+#define outl(val, port)         writel((val), (u32 *)((unsigned long)(port)))
+
+#define inb_p(port)             inb((port))
+#define outb_p(val, port)       outb((val), (port))
+#define inw_p(port)             inw((port))
+#define outw_p(val, port)       outw((val), (port))
+#define inl_p(port)             inl((port))
+#define outl_p(val, port)       outl((val), (port))
+
+#define memset_io(a, b, c)      memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c)  memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)    memcpy((void *)(a), (b), (c))
+
+/**
+ *      virt_to_phys - map virtual addresses to physical
+ *      @address: address to remap
+ *
+ *      The returned physical address is the physical (CPU) mapping for
+ *      the memory address given. It is only valid to use this function on
+ *      addresses directly mapped or allocated via kmalloc.
+ *
+ *      This function does not give bus mappings for DMA transfers. In
+ *      almost all conceivable cases a device driver should not be using
+ *      this function
+ */
+static inline unsigned long __iomem virt_to_phys(volatile void *address)
+{
+        return __pa((unsigned long)address);
+}
+
+#define virt_to_bus virt_to_phys
+
+/**
+ *      phys_to_virt - map physical address to virtual
+ *      @address: address to remap
+ *
+ *      The returned virtual address is a current CPU mapping for
+ *      the memory address given. It is only valid to use this function on
+ *      addresses that have a kernel mapping
+ *
+ *      This function does not handle bus mappings for DMA transfers. In
+ *      almost all conceivable cases a device driver should not be using
+ *      this function
+ */
+static inline void *phys_to_virt(unsigned long address)
+{
+        return (void *)__va(address);
+}
+
+#define bus_to_virt(a) phys_to_virt(a)
+
+static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
+                        unsigned long flags)
+{
+        return (void *)address;
+}
+
+#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
+#define iounmap(addr)           ((void)0)
+#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+/*
+ * Big Endian
+ */
+#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
+#define out_be16(a, v) __raw_writew((v), (a))
+
+#define in_be32(a) __raw_readl((const void __iomem __force *)(a))
+#define in_be16(a) __raw_readw(a)
+
+/*
+ * Little endian
+ */
+
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
+#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
+
+#define in_le32(a) __le32_to_cpu(__raw_readl(a))
+#define in_le16(a) __le16_to_cpu(__raw_readw(a))
+
+/* Byte ops */
+#define out_8(a, v) __raw_writeb((v), (a))
+#define in_8(a) __raw_readb(a)
+
+/* FIXME */
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+        return (void __iomem *) (port);
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+        /* Nothing to do */
+}
+
+#endif /* _ASM_MICROBLAZE_IO_H */
diff --git a/arch/microblaze/include/asm/ioctl.h b/arch/microblaze/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/microblaze/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
new file mode 100644
index 000000000000..03582b249204
--- /dev/null
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IOCTLS_H
+#define _ASM_MICROBLAZE_IOCTLS_H
+
+#include <linux/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS          0x5401
+#define TCSETS          0x5402
+#define TCSETSW         0x5403
+#define TCSETSF         0x5404
+#define TCGETA          0x5405
+#define TCSETA          0x5406
+#define TCSETAW         0x5407
+#define TCSETAF         0x5408
+#define TCSBRK          0x5409
+#define TCXONC          0x540A
+#define TCFLSH          0x540B
+#define TIOCEXCL        0x540C
+#define TIOCNXCL        0x540D
+#define TIOCSCTTY       0x540E
+#define TIOCGPGRP       0x540F
+#define TIOCSPGRP       0x5410
+#define TIOCOUTQ        0x5411
+#define TIOCSTI         0x5412
+#define TIOCGWINSZ      0x5413
+#define TIOCSWINSZ      0x5414
+#define TIOCMGET        0x5415
+#define TIOCMBIS        0x5416
+#define TIOCMBIC        0x5417
+#define TIOCMSET        0x5418
+#define TIOCGSOFTCAR    0x5419
+#define TIOCSSOFTCAR    0x541A
+#define FIONREAD        0x541B
+#define TIOCINQ         FIONREAD
+#define TIOCLINUX       0x541C
+#define TIOCCONS        0x541D
+#define TIOCGSERIAL     0x541E
+#define TIOCSSERIAL     0x541F
+#define TIOCPKT         0x5420
+#define FIONBIO         0x5421
+#define TIOCNOTTY       0x5422
+#define TIOCSETD        0x5423
+#define TIOCGETD        0x5424
+#define TCSBRKP         0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT  0x5426 /* For debugging only */
+#define TIOCSBRK        0x5427 /* BSD compatibility */
+#define TIOCCBRK        0x5428 /* BSD compatibility */
+#define TIOCGSID        0x5429 /* Return the session ID of FD */
+/* Get Pty Number (of pty-mux device) */
+#define TIOCGPTN        _IOR('T', 0x30, unsigned int)
+#define TIOCSPTLCK      _IOW('T', 0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX        0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX         0x5451
+#define FIOASYNC        0x5452
+#define TIOCSERCONFIG   0x5453
+#define TIOCSERGWILD    0x5454
+#define TIOCSERSWILD    0x5455
+#define TIOCGLCKTRMIOS  0x5456
+#define TIOCSLCKTRMIOS  0x5457
+#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT      0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x545D /* read serial port inline interrupt counts */
+
+#define FIOQSIZE        0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA            0
+#define TIOCPKT_FLUSHREAD       1
+#define TIOCPKT_FLUSHWRITE      2
+#define TIOCPKT_STOP            4
+#define TIOCPKT_START           8
+#define TIOCPKT_NOSTOP          16
+#define TIOCPKT_DOSTOP          32
+
+#define TIOCSER_TEMT    0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_MICROBLAZE_IOCTLS_H */
diff --git a/arch/microblaze/include/asm/ipc.h b/arch/microblaze/include/asm/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/arch/microblaze/include/asm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..b056fa420654
--- /dev/null
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IPCBUF_H
+#define _ASM_MICROBLAZE_IPCBUF_H
+
+/*
+ * The user_ipc_perm structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+#endif /* _ASM_MICROBLAZE_IPCBUF_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
new file mode 100644
index 000000000000..db515deaa720
--- /dev/null
+++ b/arch/microblaze/include/asm/irq.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQ_H
+#define _ASM_MICROBLAZE_IRQ_H
+
+#define NR_IRQS 32
+
+#include <linux/interrupt.h>
+
+extern unsigned int nr_irq;
+
+#define NO_IRQ (-1)
+
+static inline int irq_canonicalize(int irq)
+{
+        return irq;
+}
+
+struct pt_regs;
+extern void do_IRQ(struct pt_regs *regs);
+
+/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+struct device_node;
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/** FIXME - not implement
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+        return;
+}
+
+#endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/irq_regs.h b/arch/microblaze/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/microblaze/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
new file mode 100644
index 000000000000..dea65645a4f8
--- /dev/null
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQFLAGS_H
+#define _ASM_MICROBLAZE_IRQFLAGS_H
+
+#include <linux/irqflags.h>
+
+# if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+
+# define local_irq_save(flags)                          \
+        do {                                            \
+                asm volatile ("# local_irq_save \n\t"   \
+                                "msrclr %0, %1  \n\t"   \
+                                "nop    \n\t"           \
+                                : "=r"(flags)           \
+                                : "i"(MSR_IE)           \
+                                : "memory");            \
+        } while (0)
+
+# define local_irq_disable()                                    \
+        do {                                                    \
+                asm volatile ("# local_irq_disable \n\t"        \
+                                "msrclr r0, %0 \n\t"            \
+                                "nop    \n\t"                   \
+                                :                               \
+                                : "i"(MSR_IE)                   \
+                                : "memory");                    \
+        } while (0)
+
+# define local_irq_enable()                                     \
+        do {                                                    \
+                asm volatile ("# local_irq_enable \n\t"         \
+                                "msrset r0, %0 \n\t"            \
+                                "nop    \n\t"                   \
+                                :                               \
+                                : "i"(MSR_IE)                   \
+                                : "memory");                    \
+        } while (0)
+
+# else /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR == 0 */
+
+# define local_irq_save(flags)                                  \
+        do {                                                    \
+                register unsigned tmp;                          \
+                asm volatile ("# local_irq_save \n\t"           \
+                                "mfs    %0, rmsr \n\t"          \
+                                "nop \n\t"                      \
+                                "andi   %1, %0, %2 \n\t"        \
+                                "mts    rmsr, %1 \n\t"          \
+                                "nop \n\t"                      \
+                                : "=r"(flags), "=r" (tmp)       \
+                                : "i"(~MSR_IE)                  \
+                                : "memory");                    \
+        } while (0)
+
+# define local_irq_disable()                                    \
+        do {                                                    \
+                register unsigned tmp;                          \
+                asm volatile ("# local_irq_disable \n\t"        \
+                                "mfs    %0, rmsr \n\t"          \
+                                "nop \n\t"                      \
+                                "andi   %0, %0, %1 \n\t"        \
+                                "mts    rmsr, %0 \n\t"          \
+                                "nop \n\t"                      \
+                                : "=r"(tmp)                     \
+                                : "i"(~MSR_IE)                  \
+                                : "memory");                    \
+        } while (0)
+
+# define local_irq_enable()                                     \
+        do {                                                    \
+                register unsigned tmp;                          \
+                asm volatile ("# local_irq_enable \n\t"         \
+                                "mfs    %0, rmsr \n\t"          \
+                                "nop \n\t"                      \
+                                "ori    %0, %0, %1 \n\t"        \
+                                "mts    rmsr, %0 \n\t"          \
+                                "nop \n\t"                      \
+                                : "=r"(tmp)                     \
+                                : "i"(MSR_IE)                   \
+                                : "memory");                    \
+        } while (0)
+
+# endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+#define local_save_flags(flags)                                 \
+        do {                                                    \
+                asm volatile ("# local_save_flags \n\t"         \
+                                "mfs    %0, rmsr \n\t"          \
+                                "nop    \n\t"                   \
+                                : "=r"(flags)                   \
+                                :                               \
+                                : "memory");                    \
+        } while (0)
+
+#define local_irq_restore(flags)                        \
+        do {                                            \
+                asm volatile ("# local_irq_restore \n\t"\
+                                "mts    rmsr, %0 \n\t"  \
+                                "nop    \n\t"           \
+                                :                       \
+                                : "r"(flags)            \
+                                : "memory");            \
+        } while (0)
+
+static inline int irqs_disabled(void)
+{
+        unsigned long flags;
+
+        local_save_flags(flags);
+        return ((flags & MSR_IE) == 0);
+}
+
+#define raw_irqs_disabled irqs_disabled
+#define raw_irqs_disabled_flags(flags)  ((flags) == 0)
+
+#endif /* _ASM_MICROBLAZE_IRQFLAGS_H */
diff --git a/arch/microblaze/include/asm/kdebug.h b/arch/microblaze/include/asm/kdebug.h
new file mode 100644
index 000000000000..6ece1b037665
--- /dev/null
+++ b/arch/microblaze/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/microblaze/include/asm/kmap_types.h b/arch/microblaze/include/asm/kmap_types.h
new file mode 100644
index 000000000000..4d7e222f5dd7
--- /dev/null
+++ b/arch/microblaze/include/asm/kmap_types.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_KMAP_TYPES_H
+#define _ASM_MICROBLAZE_KMAP_TYPES_H
+
+enum km_type {
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR,
+};
+
+#endif /* _ASM_MICROBLAZE_KMAP_TYPES_H */
diff --git a/arch/microblaze/include/asm/linkage.h b/arch/microblaze/include/asm/linkage.h
new file mode 100644
index 000000000000..3a8e36d057eb
--- /dev/null
+++ b/arch/microblaze/include/asm/linkage.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_LINKAGE_H
+#define _ASM_MICROBLAZE_LINKAGE_H
+
+#define __ALIGN         .align 4
+#define __ALIGN_STR     ".align 4"
+
+#endif /* _ASM_MICROBLAZE_LINKAGE_H */
diff --git a/arch/microblaze/include/asm/lmb.h b/arch/microblaze/include/asm/lmb.h
new file mode 100644
index 000000000000..a0a0a929c293
--- /dev/null
+++ b/arch/microblaze/include/asm/lmb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_LMB_H
+#define _ASM_MICROBLAZE_LMB_H
+
+/* LMB limit is OFF */
+#define LMB_REAL_LIMIT  0xFFFFFFFF
+
+#endif /* _ASM_MICROBLAZE_LMB_H */
+
+
diff --git a/arch/microblaze/include/asm/local.h b/arch/microblaze/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/microblaze/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
new file mode 100644
index 000000000000..4914b1329445
--- /dev/null
+++ b/arch/microblaze/include/asm/mman.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMAN_H
+#define _ASM_MICROBLAZE_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN   0x0100 /* stack-like segment */
+#define MAP_DENYWRITE   0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE  0x1000 /* mark it as an executable */
+#define MAP_LOCKED      0x2000 /* pages are locked */
+#define MAP_NORESERVE   0x4000 /* don't check for reservations */
+#define MAP_POPULATE    0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK    0x10000 /* do not block on IO */
+
+#define MCL_CURRENT     1 /* lock all current mappings */
+#define MCL_FUTURE      2 /* lock all future mappings */
+
+#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
new file mode 100644
index 000000000000..0e0431d61635
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_H
+#define _ASM_MICROBLAZE_MMU_H
+
+#ifndef __ASSEMBLY__
+typedef struct {
+        struct vm_list_struct   *vmlist;
+        unsigned long           end_brk;
+} mm_context_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_MMU_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
new file mode 100644
index 000000000000..150ca01b74ba
--- /dev/null
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+# define init_new_context(tsk, mm)              ({ 0; })
+
+# define enter_lazy_tlb(mm, tsk)                do {} while (0)
+# define change_mm_context(old, ctx, _pml4)     do {} while (0)
+# define destroy_context(mm)                    do {} while (0)
+# define deactivate_mm(tsk, mm)                 do {} while (0)
+# define switch_mm(prev, next, tsk)             do {} while (0)
+# define activate_mm(prev, next)                do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
new file mode 100644
index 000000000000..914565a90315
--- /dev/null
+++ b/arch/microblaze/include/asm/module.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MODULE_H
+#define _ASM_MICROBLAZE_MODULE_H
+
+/* Microblaze Relocations */
+#define R_MICROBLAZE_NONE 0
+#define R_MICROBLAZE_32 1
+#define R_MICROBLAZE_32_PCREL 2
+#define R_MICROBLAZE_64_PCREL 3
+#define R_MICROBLAZE_32_PCREL_LO 4
+#define R_MICROBLAZE_64 5
+#define R_MICROBLAZE_32_LO 6
+#define R_MICROBLAZE_SRO32 7
+#define R_MICROBLAZE_SRW32 8
+#define R_MICROBLAZE_64_NONE 9
+#define R_MICROBLAZE_32_SYM_OP_SYM 10
+/* Keep this the last entry. */
+#define R_MICROBLAZE_NUM 11
+
+struct mod_arch_specific {
+        int foo;
+};
+
+#define Elf_Shdr        Elf32_Shdr
+#define Elf_Sym         Elf32_Sym
+#define Elf_Ehdr        Elf32_Ehdr
+
+typedef struct { volatile int counter; } module_t;
+
+#endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
new file mode 100644
index 000000000000..09dd97097211
--- /dev/null
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_MICROBLAZE_MSGBUF_H
+#define _ASM_MICROBLAZE_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+        struct ipc64_perm msg_perm;
+        __kernel_time_t msg_stime; /* last msgsnd time */
+        unsigned long __unused1;
+        __kernel_time_t msg_rtime; /* last msgrcv time */
+        unsigned long __unused2;
+        __kernel_time_t msg_ctime; /* last change time */
+        unsigned long __unused3;
+        unsigned long msg_cbytes; /* current number of bytes on queue */
+        unsigned long msg_qnum; /* number of messages in queue */
+        unsigned long msg_qbytes; /* max number of bytes on queue */
+        __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+        __kernel_pid_t msg_lrpid; /* last receive pid */
+        unsigned long __unused4;
+        unsigned long __unused5;
+};
+
+#endif /* _ASM_MICROBLAZE_MSGBUF_H */
diff --git a/arch/microblaze/include/asm/mutex.h b/arch/microblaze/include/asm/mutex.h
new file mode 100644
index 000000000000..ff6101aa2c71
--- /dev/null
+++ b/arch/microblaze/include/asm/mutex.h
@@ -0,0 +1 @@
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h
new file mode 100644
index 000000000000..61d60b8a07d5
--- /dev/null
+++ b/arch/microblaze/include/asm/namei.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_NAMEI_H
+#define _ASM_MICROBLAZE_NAMEI_H
+
+#ifdef __KERNEL__
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+#define __emul_prefix() NULL
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_NAMEI_H */
diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h
new file mode 100644
index 000000000000..ba917cfaefe6
--- /dev/null
+++ b/arch/microblaze/include/asm/of_device.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ *
+ * based on PowerPC of_device.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_OF_DEVICE_H
+#define _ASM_MICROBLAZE_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device {
+        struct device_node      *node; /* to be obsoleted */
+        u64                     dma_mask; /* DMA mask */
+        struct device           dev; /* Generic device interface */
+};
+
+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+                                        char *str, ssize_t len);
+
+extern struct of_device *of_device_alloc(struct device_node *np,
+                                         const char *bus_id,
+                                         struct device *parent);
+
+extern int of_device_uevent(struct device *dev,
+                            struct kobj_uevent_env *env);
+
+extern void of_device_make_bus_id(struct of_device *dev);
+
+/* This is just here during the transition */
+#include <linux/of_device.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */
diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h
new file mode 100644
index 000000000000..187c0eedaece
--- /dev/null
+++ b/arch/microblaze/include/asm/of_platform.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                      <benh@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H
+#define _ASM_MICROBLAZE_OF_PLATFORM_H
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+/*
+ * The list of OF IDs below is used for matching bus types in the
+ * system whose devices are to be exposed as of_platform_devices.
+ *
+ * This is the default list valid for most platforms. This file provides
+ * functions who can take an explicit list if necessary though
+ *
+ * The search is always performed recursively looking for children of
+ * the provided device_node and recursively if such a children matches
+ * a bus type in the list
+ */
+
+static const struct of_device_id of_default_bus_ids[] = {
+        { .type = "soc", },
+        { .compatible = "soc", },
+        { .type = "plb5", },
+        { .type = "plb4", },
+        { .type = "opb", },
+        { .type = "simple", },
+        {},
+};
+
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+        return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+        of_unregister_driver(drv);
+}
+
+/* Platform devices and busses creation */
+extern struct of_device *of_platform_device_create(struct device_node *np,
+                                                const char *bus_id,
+                                                struct device *parent);
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+                                const struct of_device_id *matches,
+                                struct device *parent);
+
+extern struct of_device *of_find_device_by_phandle(phandle ph);
+
+extern void of_instantiate_rtc(void);
+
+#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
new file mode 100644
index 000000000000..7238dcfcc517
--- /dev/null
+++ b/arch/microblaze/include/asm/page.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Changes for MMU support:
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PAGE_H
+#define _ASM_MICROBLAZE_PAGE_H
+
+#include <linux/pfn.h>
+#include <asm/setup.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT      (12)
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define PAGE_UP(addr)   (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
+#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr, size)   (((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr, size) ((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr, size)      _ALIGN_UP(addr, size)
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. When not
+ * using MMU this corresponds to the first free page in physical memory (aligned
+ * on a page boundary).
+ */
+extern unsigned int __page_offset;
+#define PAGE_OFFSET __page_offset
+
+#define copy_page(to, from)                     memcpy((to), (from), PAGE_SIZE)
+#define get_user_page(vaddr)                    __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)              free_page(addr)
+
+#define clear_page(pgaddr)                      memset((pgaddr), 0, PAGE_SIZE)
+
+
+#define clear_user_page(pgaddr, vaddr, page)    memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg) \
+                        memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct page *pgtable_t;
+typedef struct { unsigned long  pte; }          pte_t;
+typedef struct { unsigned long  pgprot; }       pgprot_t;
+typedef struct { unsigned long  ste[64]; }      pmd_t;
+typedef struct { pmd_t          pue[1]; }       pud_t;
+typedef struct { pud_t          pge[1]; }       pgd_t;
+
+
+#define pte_val(x)      ((x).pte)
+#define pgprot_val(x)   ((x).pgprot)
+#define pmd_val(x)      ((x).ste[0])
+#define pud_val(x)      ((x).pue[0])
+#define pgd_val(x)      ((x).pge[0])
+
+#define __pte(x)        ((pte_t) { (x) })
+#define __pmd(x)        ((pmd_t) { (x) })
+#define __pgd(x)        ((pgd_t) { (x) })
+#define __pgprot(x)     ((pgprot_t) { (x) })
+
+/**
+ * Conversions for virtual address, physical address, pfn, and struct
+ * page are defined in the following files.
+ *
+ * virt -+
+ *       | asm-microblaze/page.h
+ * phys -+
+ *       | linux/pfn.h
+ *  pfn -+
+ *       | asm-generic/memory_model.h
+ * page -+
+ *
+ */
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#define __pa(vaddr)             ((unsigned long) (vaddr))
+#define __va(paddr)             ((void *) (paddr))
+
+#define phys_to_pfn(phys)       (PFN_DOWN(phys))
+#define pfn_to_phys(pfn)        (PFN_PHYS(pfn))
+
+#define virt_to_pfn(vaddr)      (phys_to_pfn((__pa(vaddr))))
+#define pfn_to_virt(pfn)        __va(pfn_to_phys((pfn)))
+
+#define virt_to_page(vaddr)     (pfn_to_page(virt_to_pfn(vaddr)))
+#define page_to_virt(page)      (pfn_to_virt(page_to_pfn(page)))
+
+#define page_to_phys(page)      (pfn_to_phys(page_to_pfn(page)))
+#define page_to_bus(page)       (page_to_phys(page))
+#define phys_to_page(paddr)     (pfn_to_page(phys_to_pfn(paddr)))
+
+extern unsigned int memory_start;
+extern unsigned int memory_end;
+extern unsigned int memory_size;
+
+#define pfn_valid(pfn)          ((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+
+#define ARCH_PFN_OFFSET         (PAGE_OFFSET >> PAGE_SHIFT)
+
+#else
+#define tophys(rd, rs)  (addik rd, rs, 0)
+#define tovirt(rd, rs)  (addik rd, rs, 0)
+#endif /* __ASSEMBLY__ */
+
+#define virt_addr_valid(vaddr)  (pfn_valid(virt_to_pfn(vaddr)))
+
+/* Convert between virtual and physical address for MMU.  */
+/* Handle MicroBlaze processor with virtual memory.  */
+#define __virt_to_phys(addr)    addr
+#define __phys_to_virt(addr)    addr
+
+#define TOPHYS(addr)  __virt_to_phys(addr)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_MICROBLAZE_PAGE_H */
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
new file mode 100644
index 000000000000..8c538a49616d
--- /dev/null
+++ b/arch/microblaze/include/asm/param.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PARAM_H
+#define _ASM_MICROBLAZE_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ              CONFIG_HZ       /* internal kernel timer frequency */
+#define USER_HZ         100             /* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC  (USER_HZ)       /* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE   4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+
+#endif /* _ASM_MICROBLAZE_PARAM_H */
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
new file mode 100644
index 000000000000..7ad28f6f5f1a
--- /dev/null
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -0,0 +1 @@
+#include <linux/pci.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
new file mode 100644
index 000000000000..ca03794cf3f0
--- /dev/null
+++ b/arch/microblaze/include/asm/pci.h
@@ -0,0 +1 @@
+#include <linux/io.h>
diff --git a/arch/microblaze/include/asm/percpu.h b/arch/microblaze/include/asm/percpu.h
new file mode 100644
index 000000000000..06a959d67234
--- /dev/null
+++ b/arch/microblaze/include/asm/percpu.h
@@ -0,0 +1 @@
+#include <asm-generic/percpu.h>
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
new file mode 100644
index 000000000000..2a4b35484010
--- /dev/null
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGALLOC_H
+#define _ASM_MICROBLAZE_PGALLOC_H
+
+#define check_pgt_cache()       do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_PGALLOC_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
new file mode 100644
index 000000000000..4df31e46568e
--- /dev/null
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGTABLE_H
+#define _ASM_MICROBLAZE_PGTABLE_H
+
+#include <asm/setup.h>
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)         \
+                remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define pgd_present(pgd)        (1) /* pages are always present on non MMU */
+#define pgd_none(pgd)           (0)
+#define pgd_bad(pgd)            (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)   (1)
+#define pmd_offset(a, b)        ((void *) 0)
+
+#define PAGE_NONE               __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_SHARED             __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_COPY               __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_READONLY           __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_KERNEL             __pgprot(0) /* these mean nothing to non MMU */
+
+#define __swp_type(x)           (0)
+#define __swp_offset(x)         (0)
+#define __swp_entry(typ, off)   ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)   ((pte_t) { (x).val })
+
+#ifndef __ASSEMBLY__
+static inline int pte_file(pte_t pte) { return 0; }
+#endif /* __ASSEMBLY__ */
+
+#define ZERO_PAGE(vaddr)        ({ BUG(); NULL; })
+
+#define swapper_pg_dir ((pgd_t *) NULL)
+
+#define pgtable_cache_init()    do {} while (0)
+
+#define arch_enter_lazy_cpu_mode()      do {} while (0)
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+void setup_memory(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_PGTABLE_H */
diff --git a/arch/microblaze/include/asm/poll.h b/arch/microblaze/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/microblaze/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
new file mode 100644
index 000000000000..b4df41c5dde2
--- /dev/null
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
+#define _ASM_MICROBLAZE_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned int    __kernel_mode_t;
+typedef unsigned int    __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned int    __kernel_ipc_pid_t;
+typedef unsigned int    __kernel_uid_t;
+typedef unsigned int    __kernel_gid_t;
+typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char            *__kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned int    __kernel_old_uid_t;
+typedef unsigned int    __kernel_old_gid_t;
+typedef unsigned int    __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+        int     val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+        int     __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef  __FD_SET
+#define __FD_SET(d, set)        ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef  __FD_CLR
+#define __FD_CLR(d, set)        ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef  __FD_ISSET
+#define __FD_ISSET(d, set)      (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
+
+#undef  __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
new file mode 100644
index 000000000000..d8e15434ba21
--- /dev/null
+++ b/arch/microblaze/include/asm/processor.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROCESSOR_H
+#define _ASM_MICROBLAZE_PROCESSOR_H
+
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+#include <asm/registers.h>
+#include <asm/segment.h>
+
+# ifndef __ASSEMBLY__
+/* from kernel/cpu/mb.c */
+extern const struct seq_operations cpuinfo_op;
+
+# define cpu_relax()            barrier()
+# define cpu_sleep()            do {} while (0)
+# define prepare_to_copy(tsk)   do {} while (0)
+
+# endif /* __ASSEMBLY__ */
+
+/*
+ * User space process size: memory size
+ *
+ * TASK_SIZE on MMU cpu is usually 1GB. However, on no-MMU arch, both
+ * user processes and the kernel is on the same memory region. They
+ * both share the memory space and that is limited by the amount of
+ * physical memory. thus, we set TASK_SIZE == amount of total memory.
+ */
+# define TASK_SIZE      (0x81000000 - 0x80000000)
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+# define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+# define TASK_UNMAPPED_BASE     0
+
+/* definition in include/linux/sched.h */
+struct task_struct;
+
+/* thread_struct is gone. use thread_info instead. */
+struct thread_struct { };
+# define INIT_THREAD    { }
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs *regs,
+                                unsigned long pc,
+                                unsigned long usp)
+{
+        regs->pc = pc;
+        regs->r1 = usp;
+        regs->kernel_mode = 0;
+}
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Free all resources held by a thread. */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+# define task_pt_regs(tsk) \
+                (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+# define KSTK_EIP(tsk)  (0)
+# define KSTK_ESP(tsk)  (0)
+
+#endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
new file mode 100644
index 000000000000..20f7b3a926e8
--- /dev/null
+++ b/arch/microblaze/include/asm/prom.h
@@ -0,0 +1,313 @@
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROM_H
+#define _ASM_MICROBLAZE_PROM_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+
+#define of_compat_cmp(s1, s2, l)        strncasecmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2)             strcmp((s1), (s2))
+#define of_node_cmp(s1, s2)             strcasecmp((s1), (s2))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER            0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE        0x1 /* Start of node, full name */
+#define OF_DT_END_NODE          0x2 /* End node */
+#define OF_DT_PROP              0x3 /* Property: name off, size, content */
+#define OF_DT_NOP               0x4 /* nop */
+#define OF_DT_END               0x9
+
+#define OF_DT_VERSION           0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header {
+        u32     magic; /* magic word OF_DT_HEADER */
+        u32     totalsize; /* total size of DT block */
+        u32     off_dt_struct; /* offset to structure */
+        u32     off_dt_strings; /* offset to strings */
+        u32     off_mem_rsvmap; /* offset to memory reserve map */
+        u32     version; /* format version */
+        u32     last_comp_version; /* last compatible version */
+        /* version 2 fields below */
+        u32     boot_cpuid_phys; /* Physical CPU id we're booting on */
+        /* version 3 fields below */
+        u32     dt_strings_size; /* size of the DT strings block */
+        /* version 17 fields below */
+        u32     dt_struct_size; /* size of the DT structure block */
+};
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+        char    *name;
+        int     length;
+        void    *value;
+        struct property *next;
+};
+
+struct device_node {
+        const char *name;
+        const char *type;
+        phandle node;
+        phandle linux_phandle;
+        char    *full_name;
+
+        struct  property *properties;
+        struct  property *deadprops; /* removed properties */
+        struct  device_node *parent;
+        struct  device_node *child;
+        struct  device_node *sibling;
+        struct  device_node *next; /* next device of same type */
+        struct  device_node *allnext; /* next in list of all nodes */
+        struct  proc_dir_entry *pde; /* this node's proc directory */
+        struct  kref kref;
+        unsigned long _flags;
+        void    *data;
+};
+
+extern struct device_node *of_chosen;
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+        return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+        set_bit(flag, &n->_flags);
+}
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn,
+                                        struct proc_dir_entry *de)
+{
+        dn->pde = de;
+}
+
+extern struct device_node *allnodes;    /* temporary while merging */
+extern rwlock_t devtree_lock;   /* temporary while merging */
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+                                        const char *uname, int depth,
+                                        void *data),
+                                void *data);
+extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+                                        unsigned long *size);
+extern int __init
+                of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern int early_uartlite_console(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node *np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node *np, struct property *prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+                                struct property *newprop,
+                                struct property *oldprop);
+
+extern struct resource *request_OF_resource(struct device_node *node,
+                                int index, const char *name_postfix);
+extern int release_OF_resource(struct device_node *node, int index);
+
+/*
+ * OF address retreival & translation
+ */
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+        u64 r = 0;
+        while (size--)
+                r = (r << 32) | *(cell++);
+        return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#define of_read_ulong(cell, size)       of_read_number(cell, size)
+
+/* Translate an OF address block into a CPU physical address
+ */
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+                        u64 *size, unsigned int *flags);
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+                        u64 *size, unsigned int *flags);
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+                                struct resource *r);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+                                struct resource *r);
+
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+                unsigned long *busno, unsigned long *phys, unsigned long *size);
+
+extern void kdump_move_device_tree(void);
+
+/* CPU OF node matching */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC         4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+        struct device_node *controller; /* Interrupt controller node */
+        u32 size; /* Specifier size */
+        u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+/**
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags:      flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC    0x00000001
+#define OF_IMAP_NO_PHANDLE      0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:     the device interrupt parent
+ * @intspec:    interrupt specifier ("interrupts" property of the device)
+ * @ointsize:   size of the passed in interrupt specifier
+ * @addr:       address specifier (start of "reg" property of the device)
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+                        u32 ointsize, const u32 *addr,
+                        struct of_irq *out_irq);
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device:     the device whose interrupt is to be resolved
+ * @index:      index of the interrupt to resolve
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+                        struct of_irq *out_irq);
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:       the device whose interrupt is to be resolved
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+extern int of_irq_to_resource(struct device_node *dev, int index,
+                        struct resource *r);
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device:     the device whose io range will be mapped
+ * @index:      index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/*
+ * NB: This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
new file mode 100644
index 000000000000..f1f03486428a
--- /dev/null
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PTRACE_H
+#define _ASM_MICROBLAZE_PTRACE_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef unsigned long microblaze_reg_t;
+
+struct pt_regs {
+        microblaze_reg_t r0;
+        microblaze_reg_t r1;
+        microblaze_reg_t r2;
+        microblaze_reg_t r3;
+        microblaze_reg_t r4;
+        microblaze_reg_t r5;
+        microblaze_reg_t r6;
+        microblaze_reg_t r7;
+        microblaze_reg_t r8;
+        microblaze_reg_t r9;
+        microblaze_reg_t r10;
+        microblaze_reg_t r11;
+        microblaze_reg_t r12;
+        microblaze_reg_t r13;
+        microblaze_reg_t r14;
+        microblaze_reg_t r15;
+        microblaze_reg_t r16;
+        microblaze_reg_t r17;
+        microblaze_reg_t r18;
+        microblaze_reg_t r19;
+        microblaze_reg_t r20;
+        microblaze_reg_t r21;
+        microblaze_reg_t r22;
+        microblaze_reg_t r23;
+        microblaze_reg_t r24;
+        microblaze_reg_t r25;
+        microblaze_reg_t r26;
+        microblaze_reg_t r27;
+        microblaze_reg_t r28;
+        microblaze_reg_t r29;
+        microblaze_reg_t r30;
+        microblaze_reg_t r31;
+        microblaze_reg_t pc;
+        microblaze_reg_t msr;
+        microblaze_reg_t ear;
+        microblaze_reg_t esr;
+        microblaze_reg_t fsr;
+        int kernel_mode;
+};
+
+#define kernel_mode(regs)               ((regs)->kernel_mode)
+#define user_mode(regs)                 (!kernel_mode(regs))
+
+#define instruction_pointer(regs)       ((regs)->pc)
+#define profile_pc(regs)                instruction_pointer(regs)
+
+void show_regs(struct pt_regs *);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h
new file mode 100644
index 000000000000..66f1b30dd097
--- /dev/null
+++ b/arch/microblaze/include/asm/pvr.h
@@ -0,0 +1,209 @@
+/*
+ * Support for the MicroBlaze PVR (Processor Version Register)
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * Copyright (C) 2007 - 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PVR_H
+#define _ASM_MICROBLAZE_PVR_H
+
+#define PVR_MSR_BIT 0x400
+
+struct pvr_s {
+        unsigned pvr[16];
+};
+
+/* The following taken from Xilinx's standalone BSP pvr.h */
+
+/* Basic PVR mask */
+#define PVR0_PVR_FULL_MASK              0x80000000
+#define PVR0_USE_BARREL_MASK            0x40000000
+#define PVR0_USE_DIV_MASK               0x20000000
+#define PVR0_USE_HW_MUL_MASK            0x10000000
+#define PVR0_USE_FPU_MASK               0x08000000
+#define PVR0_USE_EXC_MASK               0x04000000
+#define PVR0_USE_ICACHE_MASK            0x02000000
+#define PVR0_USE_DCACHE_MASK            0x01000000
+#define PVR0_USE_MMU                    0x00800000      /* new */
+#define PVR0_VERSION_MASK               0x0000FF00
+#define PVR0_USER1_MASK                 0x000000FF
+
+/* User 2 PVR mask */
+#define PVR1_USER2_MASK                 0xFFFFFFFF
+
+/* Configuration PVR masks */
+#define PVR2_D_OPB_MASK                 0x80000000
+#define PVR2_D_LMB_MASK                 0x40000000
+#define PVR2_I_OPB_MASK                 0x20000000
+#define PVR2_I_LMB_MASK                 0x10000000
+#define PVR2_INTERRUPT_IS_EDGE_MASK     0x08000000
+#define PVR2_EDGE_IS_POSITIVE_MASK      0x04000000
+#define PVR2_D_PLB_MASK                 0x02000000      /* new */
+#define PVR2_I_PLB_MASK                 0x01000000      /* new */
+#define PVR2_INTERCONNECT               0x00800000      /* new */
+#define PVR2_USE_EXTEND_FSL             0x00080000      /* new */
+#define PVR2_USE_FSL_EXC                0x00040000      /* new */
+#define PVR2_USE_MSR_INSTR              0x00020000
+#define PVR2_USE_PCMP_INSTR             0x00010000
+#define PVR2_AREA_OPTIMISED             0x00008000
+#define PVR2_USE_BARREL_MASK            0x00004000
+#define PVR2_USE_DIV_MASK               0x00002000
+#define PVR2_USE_HW_MUL_MASK            0x00001000
+#define PVR2_USE_FPU_MASK               0x00000800
+#define PVR2_USE_MUL64_MASK             0x00000400
+#define PVR2_USE_FPU2_MASK              0x00000200      /* new */
+#define PVR2_USE_IPLBEXC                0x00000100
+#define PVR2_USE_DPLBEXC                0x00000080
+#define PVR2_OPCODE_0x0_ILL_MASK        0x00000040
+#define PVR2_UNALIGNED_EXC_MASK         0x00000020
+#define PVR2_ILL_OPCODE_EXC_MASK        0x00000010
+#define PVR2_IOPB_BUS_EXC_MASK          0x00000008
+#define PVR2_DOPB_BUS_EXC_MASK          0x00000004
+#define PVR2_DIV_ZERO_EXC_MASK          0x00000002
+#define PVR2_FPU_EXC_MASK               0x00000001
+
+/* Debug and exception PVR masks */
+#define PVR3_DEBUG_ENABLED_MASK         0x80000000
+#define PVR3_NUMBER_OF_PC_BRK_MASK      0x1E000000
+#define PVR3_NUMBER_OF_RD_ADDR_BRK_MASK 0x00380000
+#define PVR3_NUMBER_OF_WR_ADDR_BRK_MASK 0x0000E000
+#define PVR3_FSL_LINKS_MASK             0x00000380
+
+/* ICache config PVR masks */
+#define PVR4_USE_ICACHE_MASK            0x80000000
+#define PVR4_ICACHE_ADDR_TAG_BITS_MASK  0x7C000000
+#define PVR4_ICACHE_USE_FSL_MASK        0x02000000
+#define PVR4_ICACHE_ALLOW_WR_MASK       0x01000000
+#define PVR4_ICACHE_LINE_LEN_MASK       0x00E00000
+#define PVR4_ICACHE_BYTE_SIZE_MASK      0x001F0000
+
+/* DCache config PVR masks */
+#define PVR5_USE_DCACHE_MASK            0x80000000
+#define PVR5_DCACHE_ADDR_TAG_BITS_MASK  0x7C000000
+#define PVR5_DCACHE_USE_FSL_MASK        0x02000000
+#define PVR5_DCACHE_ALLOW_WR_MASK       0x01000000
+#define PVR5_DCACHE_LINE_LEN_MASK       0x00E00000
+#define PVR5_DCACHE_BYTE_SIZE_MASK      0x001F0000
+
+/* ICache base address PVR mask */
+#define PVR6_ICACHE_BASEADDR_MASK       0xFFFFFFFF
+
+/* ICache high address PVR mask */
+#define PVR7_ICACHE_HIGHADDR_MASK       0xFFFFFFFF
+
+/* DCache base address PVR mask */
+#define PVR8_DCACHE_BASEADDR_MASK       0xFFFFFFFF
+
+/* DCache high address PVR mask */
+#define PVR9_DCACHE_HIGHADDR_MASK       0xFFFFFFFF
+
+/* Target family PVR mask */
+#define PVR10_TARGET_FAMILY_MASK        0xFF000000
+
+/* MMU descrtiption */
+#define PVR11_USE_MMU                   0xC0000000
+#define PVR11_MMU_ITLB_SIZE             0x38000000
+#define PVR11_MMU_DTLB_SIZE             0x07000000
+#define PVR11_MMU_TLB_ACCESS            0x00C00000
+#define PVR11_MMU_ZONES                 0x003C0000
+/* MSR Reset value PVR mask */
+#define PVR11_MSR_RESET_VALUE_MASK      0x000007FF
+
+
+/* PVR access macros */
+#define PVR_IS_FULL(pvr)                (pvr.pvr[0] & PVR0_PVR_FULL_MASK)
+#define PVR_USE_BARREL(pvr)             (pvr.pvr[0] & PVR0_USE_BARREL_MASK)
+#define PVR_USE_DIV(pvr)                (pvr.pvr[0] & PVR0_USE_DIV_MASK)
+#define PVR_USE_HW_MUL(pvr)             (pvr.pvr[0] & PVR0_USE_HW_MUL_MASK)
+#define PVR_USE_FPU(pvr)                (pvr.pvr[0] & PVR0_USE_FPU_MASK)
+#define PVR_USE_FPU2(pvr)               (pvr.pvr[2] & PVR2_USE_FPU2_MASK)
+#define PVR_USE_ICACHE(pvr)             (pvr.pvr[0] & PVR0_USE_ICACHE_MASK)
+#define PVR_USE_DCACHE(pvr)             (pvr.pvr[0] & PVR0_USE_DCACHE_MASK)
+#define PVR_VERSION(pvr)        ((pvr.pvr[0] & PVR0_VERSION_MASK) >> 8)
+#define PVR_USER1(pvr)                  (pvr.pvr[0] & PVR0_USER1_MASK)
+#define PVR_USER2(pvr)                  (pvr.pvr[1] & PVR1_USER2_MASK)
+
+#define PVR_D_OPB(pvr)                  (pvr.pvr[2] & PVR2_D_OPB_MASK)
+#define PVR_D_LMB(pvr)                  (pvr.pvr[2] & PVR2_D_LMB_MASK)
+#define PVR_I_OPB(pvr)                  (pvr.pvr[2] & PVR2_I_OPB_MASK)
+#define PVR_I_LMB(pvr)                  (pvr.pvr[2] & PVR2_I_LMB_MASK)
+#define PVR_INTERRUPT_IS_EDGE(pvr) \
+                        (pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK)
+#define PVR_EDGE_IS_POSITIVE(pvr) \
+                        (pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK)
+#define PVR_USE_MSR_INSTR(pvr)          (pvr.pvr[2] & PVR2_USE_MSR_INSTR)
+#define PVR_USE_PCMP_INSTR(pvr)         (pvr.pvr[2] & PVR2_USE_PCMP_INSTR)
+#define PVR_AREA_OPTIMISED(pvr)         (pvr.pvr[2] & PVR2_AREA_OPTIMISED)
+#define PVR_USE_MUL64(pvr)              (pvr.pvr[2] & PVR2_USE_MUL64_MASK)
+#define PVR_OPCODE_0x0_ILLEGAL(pvr) \
+                        (pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK)
+#define PVR_UNALIGNED_EXCEPTION(pvr) \
+                        (pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK)
+#define PVR_ILL_OPCODE_EXCEPTION(pvr) \
+                        (pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK)
+#define PVR_IOPB_BUS_EXCEPTION(pvr) \
+                        (pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK)
+#define PVR_DOPB_BUS_EXCEPTION(pvr) \
+                        (pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK)
+#define PVR_DIV_ZERO_EXCEPTION(pvr) \
+                        (pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK)
+#define PVR_FPU_EXCEPTION(pvr)          (pvr.pvr[2] & PVR2_FPU_EXC_MASK)
+#define PVR_FSL_EXCEPTION(pvr)          (pvr.pvr[2] & PVR2_USE_EXTEND_FSL)
+
+#define PVR_DEBUG_ENABLED(pvr)          (pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK)
+#define PVR_NUMBER_OF_PC_BRK(pvr) \
+                        ((pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25)
+#define PVR_NUMBER_OF_RD_ADDR_BRK(pvr) \
+                        ((pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19)
+#define PVR_NUMBER_OF_WR_ADDR_BRK(pvr) \
+                        ((pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13)
+#define PVR_FSL_LINKS(pvr)      ((pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7)
+
+#define PVR_ICACHE_ADDR_TAG_BITS(pvr) \
+                        ((pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_ICACHE_USE_FSL(pvr)         (pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK)
+#define PVR_ICACHE_ALLOW_WR(pvr)        (pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK)
+#define PVR_ICACHE_LINE_LEN(pvr) \
+                        (1 << ((pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21))
+#define PVR_ICACHE_BYTE_SIZE(pvr) \
+                        (1 << ((pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16))
+
+#define PVR_DCACHE_ADDR_TAG_BITS(pvr) \
+                        ((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_DCACHE_USE_FSL(pvr)         (pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
+#define PVR_DCACHE_ALLOW_WR(pvr)        (pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
+#define PVR_DCACHE_LINE_LEN(pvr) \
+                        (1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
+#define PVR_DCACHE_BYTE_SIZE(pvr) \
+                        (1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
+
+
+#define PVR_ICACHE_BASEADDR(pvr)        (pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
+#define PVR_ICACHE_HIGHADDR(pvr)        (pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
+
+#define PVR_DCACHE_BASEADDR(pvr)        (pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK)
+#define PVR_DCACHE_HIGHADDR(pvr)        (pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK)
+
+#define PVR_TARGET_FAMILY(pvr)  ((pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24)
+
+#define PVR_MSR_RESET_VALUE(pvr) \
+                                (pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK)
+
+/* mmu */
+#define PVR_USE_MMU(pvr)        ((pvr.pvr[11] & PVR11_USE_MMU) >> 30)
+#define PVR_MMU_ITLB_SIZE(pvr)  (pvr.pvr[11] & PVR11_MMU_ITLB_SIZE)
+#define PVR_MMU_DTLB_SIZE(pvr)  (pvr.pvr[11] & PVR11_MMU_DTLB_SIZE)
+#define PVR_MMU_TLB_ACCESS(pvr) (pvr.pvr[11] & PVR11_MMU_TLB_ACCESS)
+#define PVR_MMU_ZONES(pvr)      (pvr.pvr[11] & PVR11_MMU_ZONES)
+
+
+int cpu_has_pvr(void);
+void get_pvr(struct pvr_s *pvr);
+
+#endif /* _ASM_MICROBLAZE_PVR_H */
diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h
new file mode 100644
index 000000000000..834142d9356f
--- /dev/null
+++ b/arch/microblaze/include/asm/registers.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_REGISTERS_H
+#define _ASM_MICROBLAZE_REGISTERS_H
+
+#define MSR_BE  (1<<0) /* 0x001 */
+#define MSR_IE  (1<<1) /* 0x002 */
+#define MSR_C   (1<<2) /* 0x004 */
+#define MSR_BIP (1<<3) /* 0x008 */
+#define MSR_FSL (1<<4) /* 0x010 */
+#define MSR_ICE (1<<5) /* 0x020 */
+#define MSR_DZ  (1<<6) /* 0x040 */
+#define MSR_DCE (1<<7) /* 0x080 */
+#define MSR_EE  (1<<8) /* 0x100 */
+#define MSR_EIP (1<<9) /* 0x200 */
+#define MSR_CC  (1<<31)
+
+/* Floating Point Status Register (FSR) Bits */
+#define FSR_IO          (1<<4) /* Invalid operation */
+#define FSR_DZ          (1<<3) /* Divide-by-zero */
+#define FSR_OF          (1<<2) /* Overflow */
+#define FSR_UF          (1<<1) /* Underflow */
+#define FSR_DO          (1<<0) /* Denormalized operand error */
+
+#endif /* _ASM_MICROBLAZE_REGISTERS_H */
diff --git a/arch/microblaze/include/asm/resource.h b/arch/microblaze/include/asm/resource.h
new file mode 100644
index 000000000000..04bc4db8921b
--- /dev/null
+++ b/arch/microblaze/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
new file mode 100644
index 000000000000..08ff1d049b42
--- /dev/null
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
+#define _ASM_MICROBLAZE_SCATTERLIST_H
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long   sg_magic;
+#endif
+        unsigned long   page_link;
+        dma_addr_t      dma_address;
+        unsigned int    offset;
+        unsigned int    length;
+};
+
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
new file mode 100644
index 000000000000..8434a43e5421
--- /dev/null
+++ b/arch/microblaze/include/asm/sections.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SECTIONS_H
+#define _ASM_MICROBLAZE_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+# ifndef __ASSEMBLY__
+extern char _ssbss[], _esbss[];
+extern unsigned long __ivt_start[], __ivt_end[];
+
+#  ifdef CONFIG_MTD_UCLINUX
+extern char *_ebss;
+#  endif
+
+extern u32 _fdt_start[], _fdt_end[];
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SECTIONS_H */
diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h
new file mode 100644
index 000000000000..7f5dcc56eea1
--- /dev/null
+++ b/arch/microblaze/include/asm/segment.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SEGMENT_H
+#define _ASM_MICROBLAZE_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned long seg;
+} mm_segment_t;
+
+/*
+ * On Microblaze the fs value is actually the top of the corresponding
+ * address space.
+ *
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
+ */
+#  define KERNEL_DS     ((mm_segment_t){0})
+#  define USER_DS       KERNEL_DS
+
+# define get_ds()       (KERNEL_DS)
+# define get_fs()       (current_thread_info()->addr_limit)
+# define set_fs(x) \
+                do { current_thread_info()->addr_limit = (x); } while (0)
+
+# define segment_eq(a, b)               ((a).seg == (b).seg)
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SEGMENT_H */
diff --git a/arch/microblaze/include/asm/selfmod.h b/arch/microblaze/include/asm/selfmod.h
new file mode 100644
index 000000000000..c42aff2e6cd0
--- /dev/null
+++ b/arch/microblaze/include/asm/selfmod.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SELFMOD_H
+#define _ASM_MICROBLAZE_SELFMOD_H
+
+/*
+ * BARRIER_BASE_ADDR is constant address for selfmod function.
+ * do not change this value - selfmod function is in
+ * arch/microblaze/kernel/selfmod.c: selfmod_function()
+ *
+ * last 16 bits is used for storing register offset
+ */
+
+#define BARRIER_BASE_ADDR       0x1234ff00
+
+void selfmod_function(const int *arr_fce, const unsigned int base);
+
+#endif /* _ASM_MICROBLAZE_SELFMOD_H */
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
new file mode 100644
index 000000000000..b804ed71a57e
--- /dev/null
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SEMBUF_H
+#define _ASM_MICROBLAZE_SEMBUF_H
+
+/*
+ * The semid64_ds structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+        struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+        __kernel_time_t sem_otime; /* last semop time */
+        unsigned long   __unused1;
+        __kernel_time_t sem_ctime; /* last change time */
+        unsigned long   __unused2;
+        unsigned long   sem_nsems; /* no. of semaphores in array */
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+
+#endif /* _ASM_MICROBLAZE_SEMBUF_H */
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
new file mode 100644
index 000000000000..39bfc8ce6af5
--- /dev/null
+++ b/arch/microblaze/include/asm/serial.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SERIAL_H
+#define _ASM_MICROBLAZE_SERIAL_H
+
+# define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_MICROBLAZE_SERIAL_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
new file mode 100644
index 000000000000..9b98e8e6abae
--- /dev/null
+++ b/arch/microblaze/include/asm/setup.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SETUP_H
+#define _ASM_MICROBLAZE_SETUP_H
+
+#define COMMAND_LINE_SIZE       256
+
+# ifndef __ASSEMBLY__
+
+#  ifdef __KERNEL__
+extern unsigned int boot_cpuid; /* move to smp.h */
+
+extern char cmd_line[COMMAND_LINE_SIZE];
+#  endif/* __KERNEL__ */
+
+void early_printk(const char *fmt, ...);
+
+int setup_early_printk(char *opt);
+void disable_early_printk(void);
+
+void heartbeat(void);
+void setup_heartbeat(void);
+
+unsigned long long sched_clock(void);
+
+void time_init(void);
+void init_IRQ(void);
+void machine_early_init(const char *cmdline, unsigned int ram,
+                                                unsigned int fdt);
+
+void machine_restart(char *cmd);
+void machine_shutdown(void);
+void machine_halt(void);
+void machine_power_off(void);
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
new file mode 100644
index 000000000000..f829c5843618
--- /dev/null
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_MICROBLAZE_SHMBUF_H
+#define _ASM_MICROBLAZE_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+        struct ipc64_perm       shm_perm; /* operation perms */
+        size_t                  shm_segsz; /* size of segment (bytes) */
+        __kernel_time_t         shm_atime; /* last attach time */
+        unsigned long           __unused1;
+        __kernel_time_t         shm_dtime; /* last detach time */
+        unsigned long           __unused2;
+        __kernel_time_t         shm_ctime; /* last change time */
+        unsigned long           __unused3;
+        __kernel_pid_t          shm_cpid; /* pid of creator */
+        __kernel_pid_t          shm_lpid; /* pid of last operator */
+        unsigned long           shm_nattch; /* no. of current attaches */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+
+struct shminfo64 {
+        unsigned long   shmmax;
+        unsigned long   shmmin;
+        unsigned long   shmmni;
+        unsigned long   shmseg;
+        unsigned long   shmall;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* _ASM_MICROBLAZE_SHMBUF_H */
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
new file mode 100644
index 000000000000..9f5fc2b3b6a3
--- /dev/null
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_MICROBLAZE_SHMPARAM_H
+#define _ASM_MICROBLAZE_SHMPARAM_H
+
+#define SHMLBA  PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
diff --git a/arch/microblaze/include/asm/sigcontext.h b/arch/microblaze/include/asm/sigcontext.h
new file mode 100644
index 000000000000..55873c80c917
--- /dev/null
+++ b/arch/microblaze/include/asm/sigcontext.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGCONTEXT_H
+#define _ASM_MICROBLAZE_SIGCONTEXT_H
+
+/* FIXME should be linux/ptrace.h */
+#include <asm/ptrace.h>
+
+struct sigcontext {
+        struct pt_regs regs;
+        unsigned long oldmask;
+};
+
+#endif /* _ASM_MICROBLAZE_SIGCONTEXT_H */
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
new file mode 100644
index 000000000000..f162911a8f50
--- /dev/null
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGINFO_H
+#define _ASM_MICROBLAZE_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
new file mode 100644
index 000000000000..9676fad3486c
--- /dev/null
+++ b/arch/microblaze/include/asm/signal.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *      Yasushi SHOJI <yashi@atmark-techno.com>
+ *      Tetsuya OHKAWA <tetsuya@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGNAL_H
+#define _ASM_MICROBLAZE_SIGNAL_H
+
+#define SIGHUP          1
+#define SIGINT          2
+#define SIGQUIT         3
+#define SIGILL          4
+#define SIGTRAP         5
+#define SIGABRT         6
+#define SIGIOT          6
+#define SIGBUS          7
+#define SIGFPE          8
+#define SIGKILL         9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS          31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+#define SA_RESTORER     0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+# ifndef __ASSEMBLY__
+# include <linux/types.h>
+# include <asm-generic/signal.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#  ifdef __KERNEL__
+/*
+ * Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+#  define _NSIG         64
+#  define _NSIG_BPW     32
+#  define _NSIG_WORDS   (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+        sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+
+#  include <asm/sigcontext.h>
+#  undef __HAVE_ARCH_SIG_BITOPS
+
+#  define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#  else /* !__KERNEL__ */
+
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#  define NSIG          32
+typedef unsigned long sigset_t;
+
+struct sigaction {
+        union {
+        __sighandler_t _sa_handler;
+        void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+#  define sa_handler    _u._sa_handler
+#  define sa_sigaction  _u._sa_sigaction
+
+#  endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SIGNAL_H */
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
new file mode 100644
index 000000000000..f919b6b540ac
--- /dev/null
+++ b/arch/microblaze/include/asm/socket.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SOCKET_H
+#define _ASM_MICROBLAZE_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET      1
+
+#define SO_DEBUG        1
+#define SO_REUSEADDR    2
+#define SO_TYPE         3
+#define SO_ERROR        4
+#define SO_DONTROUTE    5
+#define SO_BROADCAST    6
+#define SO_SNDBUF       7
+#define SO_RCVBUF       8
+#define SO_SNDBUFFORCE  32
+#define SO_RCVBUFFORCE  33
+#define SO_KEEPALIVE    9
+#define SO_OOBINLINE    10
+#define SO_NO_CHECK     11
+#define SO_PRIORITY     12
+#define SO_LINGER       13
+#define SO_BSDCOMPAT    14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED     16
+#define SO_PEERCRED     17
+#define SO_RCVLOWAT     18
+#define SO_SNDLOWAT     19
+#define SO_RCVTIMEO     20
+#define SO_SNDTIMEO     21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION              22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
+#define SO_SECURITY_ENCRYPTION_NETWORK          24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP            29
+#define SCM_TIMESTAMP           SO_TIMESTAMP
+
+#define SO_ACCEPTCONN           30
+
+#define SO_PEERSEC              31
+#define SO_PASSSEC              34
+
+#define SO_TIMESTAMPNS          35
+#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
+
+#define SO_MARK                 36
+
+#endif /* _ASM_MICROBLAZE_SOCKET_H */
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
new file mode 100644
index 000000000000..9fff57a701e1
--- /dev/null
+++ b/arch/microblaze/include/asm/sockios.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SOCKIOS_H
+#define _ASM_MICROBLAZE_SOCKIOS_H
+
+#include <linux/ioctl.h>
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN       0x8901
+#define SIOCSPGRP       0x8902
+#define FIOGETOWN       0x8903
+#define SIOCGPGRP       0x8904
+#define SIOCATMARK      0x8905
+#define SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
+#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
+
+#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
new file mode 100644
index 000000000000..5f18b8aed220
--- /dev/null
+++ b/arch/microblaze/include/asm/stat.h
@@ -0,0 +1,73 @@
+/*
+ * Microblaze stat structure
+ *
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef _ASM_MICROBLAZE_STAT_H
+#define _ASM_MICROBLAZE_STAT_H
+
+#include <linux/posix_types.h>
+
+struct stat {
+        unsigned int    st_dev;
+        unsigned long   st_ino;
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+        unsigned int    st_uid;
+        unsigned int    st_gid;
+        unsigned int    st_rdev;
+        unsigned long   st_size;
+        unsigned long   st_blksize;
+        unsigned long   st_blocks;
+        unsigned long   st_atime;
+        unsigned long   __unused1; /* unsigned long  st_atime_nsec */
+        unsigned long   st_mtime;
+        unsigned long   __unused2; /* unsigned long  st_mtime_nsec */
+        unsigned long   st_ctime;
+        unsigned long   __unused3; /* unsigned long  st_ctime_nsec */
+        unsigned long   __unused4;
+        unsigned long   __unused5;
+};
+
+struct stat64 {
+        unsigned long long      st_dev;
+        unsigned long   __unused1;
+
+        unsigned long long      st_ino;
+
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+
+        unsigned int    st_uid;
+        unsigned int    st_gid;
+
+        unsigned long long      st_rdev;
+        unsigned long   __unused3;
+
+        long long       st_size;
+        unsigned long   st_blksize;
+
+        unsigned long   st_blocks; /* No. of 512-byte blocks allocated */
+        unsigned long   __unused4; /* future possible st_blocks high bits */
+
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+
+        unsigned long   st_mtime;
+        unsigned long   st_mtime_nsec;
+
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;
+
+        unsigned long   __unused8;
+};
+
+#endif /* _ASM_MICROBLAZE_STAT_H */
diff --git a/arch/microblaze/include/asm/statfs.h b/arch/microblaze/include/asm/statfs.h
new file mode 100644
index 000000000000..0b91fe198c20
--- /dev/null
+++ b/arch/microblaze/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/arch/microblaze/include/asm/string.h b/arch/microblaze/include/asm/string.h
new file mode 100644
index 000000000000..f7728c90fc18
--- /dev/null
+++ b/arch/microblaze/include/asm/string.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_STRING_H
+#define _ASM_MICROBLAZE_STRING_H
+
+#ifndef __KERNEL__
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_STRING_H */
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
new file mode 100644
index 000000000000..b375d7b65ad7
--- /dev/null
+++ b/arch/microblaze/include/asm/swab.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_MICROBLAZE_SWAB_H
+#define _ASM_MICROBLAZE_SWAB_H
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+
+#endif /* _ASM_MICROBLAZE_SWAB_H */
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
new file mode 100644
index 000000000000..9cb4ff0edeb2
--- /dev/null
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_MICROBLAZE_SYSCALLS_H
+#define __ASM_MICROBLAZE_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+
+/* FIXME will be removed */
+asmlinkage int sys_ipc(uint call, int first, int second,
+                                int third, void *ptr, long fifth);
+
+struct pt_regs;
+asmlinkage int sys_vfork(struct pt_regs *regs);
+asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+                        char __user *__user *envp, struct pt_regs *regs);
+
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+                        unsigned long prot, unsigned long flags,
+                        unsigned long fd, unsigned long pgoff);
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+                        unsigned long prot, unsigned long flags,
+                        unsigned long fd, off_t offset);
+
+/* from signal.c */
+asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
+
+asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
+                struct pt_regs *regs);
+
+asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
+                struct old_sigaction *oact);
+
+asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+                struct pt_regs *regs);
+
+asmlinkage int sys_sigreturn(struct pt_regs *regs);
+
+asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
new file mode 100644
index 000000000000..c4e308850b5d
--- /dev/null
+++ b/arch/microblaze/include/asm/system.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SYSTEM_H
+#define _ASM_MICROBLAZE_SYSTEM_H
+
+#include <asm/registers.h>
+#include <asm/setup.h>
+#include <asm/irqflags.h>
+
+struct task_struct;
+struct thread_info;
+
+extern struct task_struct *_switch_to(struct thread_info *prev,
+                                        struct thread_info *next);
+
+#define switch_to(prev, next, last)                                     \
+        do {                                                            \
+                (last) = _switch_to(task_thread_info(prev),             \
+                                        task_thread_info(next));        \
+        } while (0)
+
+#define smp_read_barrier_depends()      do {} while (0)
+#define read_barrier_depends()          do {} while (0)
+
+#define nop()                   asm volatile ("nop")
+#define mb()                    barrier()
+#define rmb()                   mb()
+#define wmb()                   mb()
+#define set_mb(var, value)      do { var = value; mb(); } while (0)
+#define set_wmb(var, value)     do { var = value; wmb(); } while (0)
+
+#define smp_mb()                mb()
+#define smp_rmb()               rmb()
+#define smp_wmb()               wmb()
+
+void show_trace(struct task_struct *task, unsigned long *stack);
+void __bad_xchg(volatile void *ptr, int size);
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+                                                                int size)
+{
+        unsigned long ret;
+        unsigned long flags;
+
+        switch (size) {
+        case 1:
+                local_irq_save(flags);
+                ret = *(volatile unsigned char *)ptr;
+                *(volatile unsigned char *)ptr = x;
+                local_irq_restore(flags);
+                break;
+
+        case 4:
+                local_irq_save(flags);
+                ret = *(volatile unsigned long *)ptr;
+                *(volatile unsigned long *)ptr = x;
+                local_irq_restore(flags);
+                break;
+        default:
+                __bad_xchg(ptr, size), ret = 0;
+                break;
+        }
+
+        return ret;
+}
+
+void disable_hlt(void);
+void enable_hlt(void);
+void default_idle(void);
+
+#define xchg(ptr, x) \
+        ((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+void free_init_pages(char *what, unsigned long begin, unsigned long end);
+void free_initmem(void);
+extern char *klimit;
+extern void ret_from_fork(void);
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *of_debugfs_root;
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_MICROBLAZE_SYSTEM_H */
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
new file mode 100644
index 000000000000..a1b64bc4724a
--- /dev/null
+++ b/arch/microblaze/include/asm/termbits.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TERMBITS_H
+#define _ASM_MICROBLAZE_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+typedef unsigned int    tcflag_t;
+
+#define NCCS 19
+struct termios {
+        tcflag_t c_iflag; /* input mode flags */
+        tcflag_t c_oflag; /* output mode flags */
+        tcflag_t c_cflag; /* control mode flags */
+        tcflag_t c_lflag; /* local mode flags */
+        cc_t c_line; /* line discipline */
+        cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct ktermios {
+        tcflag_t c_iflag; /* input mode flags */
+        tcflag_t c_oflag; /* output mode flags */
+        tcflag_t c_cflag; /* control mode flags */
+        tcflag_t c_lflag; /* local mode flags */
+        cc_t c_line; /* line discipline */
+        cc_t c_cc[NCCS]; /* control characters */
+        speed_t c_ispeed; /* input speed */
+        speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+
+#define IGNBRK  0000001
+#define BRKINT  0000002
+#define IGNPAR  0000004
+#define PARMRK  0000010
+#define INPCK   0000020
+#define ISTRIP  0000040
+#define INLCR   0000100
+#define IGNCR   0000200
+#define ICRNL   0000400
+#define IUCLC   0001000
+#define IXON    0002000
+#define IXANY   0004000
+#define IXOFF   0010000
+#define IMAXBEL 0020000
+#define IUTF8   0040000
+
+/* c_oflag bits */
+
+#define OPOST   0000001
+#define OLCUC   0000002
+#define ONLCR   0000004
+#define OCRNL   0000010
+#define ONOCR   0000020
+#define ONLRET  0000040
+#define OFILL   0000100
+#define OFDEL   0000200
+#define NLDLY   0000400
+#define NL0     0000000
+#define NL1     0000400
+#define CRDLY   0003000
+#define CR0     0000000
+#define CR1     0001000
+#define CR2     0002000
+#define CR3     0003000
+#define TABDLY  0014000
+#define TAB0    0000000
+#define TAB1    0004000
+#define TAB2    0010000
+#define TAB3    0014000
+#define XTABS   0014000
+#define BSDLY   0020000
+#define BS0     0000000
+#define BS1     0020000
+#define VTDLY   0040000
+#define VT0     0000000
+#define VT1     0040000
+#define FFDLY   0100000
+#define FF0     0000000
+#define FF1     0100000
+
+/* c_cflag bit meaning */
+
+#define CBAUD   0010017
+#define B0      0000000 /* hang up */
+#define B50     0000001
+#define B75     0000002
+#define B110    0000003
+#define B134    0000004
+#define B150    0000005
+#define B200    0000006
+#define B300    0000007
+#define B600    0000010
+#define B1200   0000011
+#define B1800   0000012
+#define B2400   0000013
+#define B4800   0000014
+#define B9600   0000015
+#define B19200  0000016
+#define B38400  0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define CS5     0000000
+#define CS6     0000020
+#define CS7     0000040
+#define CS8     0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define B57600  0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define BOTHER          0010000
+#define B1000000        0010010
+#define B1152000        0010011
+#define B1500000        0010012
+#define B2000000        0010013
+#define B2500000        0010014
+#define B3000000        0010015
+#define B3500000        0010016
+#define B4000000        0010017
+#define CIBAUD          002003600000 /* input baud rate (not used) */
+#define CMSPAR          010000000000 /* mark or space (stick) parity */
+#define CRTSCTS         020000000000 /* flow control */
+
+#define IBSHIFT 16              /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+
+/* tcflow() and TCXONC use these */
+
+#define TCOOFF          0
+#define TCOON           1
+#define TCIOFF          2
+#define TCION           3
+
+/* tcflush() and TCFLSH use these */
+
+#define TCIFLUSH        0
+#define TCOFLUSH        1
+#define TCIOFLUSH       2
+
+/* tcsetattr uses these */
+
+#define TCSANOW         0
+#define TCSADRAIN       1
+#define TCSAFLUSH       2
+
+#endif /* _ASM_MICROBLAZE_TERMBITS_H */
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
new file mode 100644
index 000000000000..102d77258668
--- /dev/null
+++ b/arch/microblaze/include/asm/termios.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TERMIOS_H
+#define _ASM_MICROBLAZE_TERMIOS_H
+
+#include <linux/string.h>
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+        unsigned short ws_row;
+        unsigned short ws_col;
+        unsigned short ws_xpixel;
+        unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+        unsigned short c_iflag; /* input mode flags */
+        unsigned short c_oflag; /* output mode flags */
+        unsigned short c_cflag; /* control mode flags */
+        unsigned short c_lflag; /* local mode flags */
+        unsigned char c_line; /* line discipline */
+        unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/*      intr=^C         quit=^|         erase=del       kill=^U
+        eof=^D          vtime=\0        vmin=\1         sxtc=\0
+        start=^Q        stop=^S         susp=^Z         eol=\0
+        reprint=^R      discard=^U      werase=^W       lnext=^V
+        eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* Modem lines */
+
+#define TIOCM_LE        0x001
+#define TIOCM_DTR       0x002
+#define TIOCM_RTS       0x004
+#define TIOCM_ST        0x008
+#define TIOCM_SR        0x010
+#define TIOCM_CTS       0x020
+#define TIOCM_CAR       0x040
+#define TIOCM_RNG       0x080
+#define TIOCM_DSR       0x100
+#define TIOCM_CD        TIOCM_CAR
+#define TIOCM_RI        TIOCM_RNG
+#define TIOCM_OUT1      0x2000
+#define TIOCM_OUT2      0x4000
+#define TIOCM_LOOP      0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* Line disciplines */
+
+#define N_TTY           0
+#define N_SLIP          1
+#define N_MOUSE         2
+#define N_PPP           3
+#define N_STRIP         4
+#define N_AX25          5
+#define N_X25           6 /* X.25 async */
+#define N_6PACK         7
+#define N_MASC          8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964         9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL  10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA          11 /* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK      12 /* SMS block mode - for talking to GSM data cards
+                                about SMS messages */
+#define N_HDLC          13 /* synchronous HDLC */
+#define N_SYNC_PPP      14
+#define N_HCI           15 /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/termios.h>
+
+#endif  /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_TERMIOS_H */
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
new file mode 100644
index 000000000000..4c3943e3f403
--- /dev/null
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_THREAD_INFO_H
+#define _ASM_MICROBLAZE_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* we have 8k stack */
+#define THREAD_SHIFT            13
+#define THREAD_SIZE             (1 << THREAD_SHIFT)
+#define THREAD_SIZE_ORDER       1
+
+#ifndef __ASSEMBLY__
+# include <linux/types.h>
+# include <asm/processor.h>
+# include <asm/segment.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *       must also be changed
+ */
+
+struct cpu_context {
+        __u32   r1; /* stack pointer */
+        __u32   r2;
+        /* dedicated registers */
+        __u32   r13;
+        __u32   r14;
+        __u32   r15;
+        __u32   r16;
+        __u32   r17;
+        __u32   r18;
+        /* non-volatile registers */
+        __u32   r19;
+        __u32   r20;
+        __u32   r21;
+        __u32   r22;
+        __u32   r23;
+        __u32   r24;
+        __u32   r25;
+        __u32   r26;
+        __u32   r27;
+        __u32   r28;
+        __u32   r29;
+        __u32   r30;
+        /* r31 is used as current task pointer */
+        /* special purpose registers */
+        __u32   msr;
+        __u32   ear;
+        __u32   esr;
+        __u32   fsr;
+};
+
+struct thread_info {
+        struct task_struct      *task; /* main task structure */
+        struct exec_domain      *exec_domain; /* execution domain */
+        unsigned long           flags; /* low level flags */
+        unsigned long           status; /* thread-synchronous flags */
+        __u32                   cpu; /* current CPU */
+        __s32                   preempt_count; /* 0 => preemptable,< 0 => BUG*/
+        mm_segment_t            addr_limit; /* thread address space */
+        struct restart_block    restart_block;
+
+        struct cpu_context      cpu_context;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .flags          = 0,                    \
+        .cpu            = 0,                    \
+        .preempt_count  = 1,                    \
+        .addr_limit     = KERNEL_DS,            \
+        .restart_block = {                      \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+        register unsigned long sp asm("r1");
+
+        return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+/* thread information allocation */
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE          0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may
+ *   need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1 /* resumption notification requested */
+#define TIF_SIGPENDING          2 /* signal pending */
+#define TIF_NEED_RESCHED        3 /* rescheduling necessary */
+/* restore singlestep on return to user mode */
+#define TIF_SINGLESTEP          4
+#define TIF_IRET                5 /* return with iret */
+#define TIF_MEMDIE              6
+#define TIF_FREEZE              14      /* Freezing for suspend */
+
+/* FIXME change in entry.S */
+#define TIF_KERNEL_TRACE        8       /* kernel trace active */
+
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_POLLING_NRFLAG      16
+
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP         (1<<TIF_SINGLESTEP)
+#define _TIF_IRET               (1<<TIF_IRET)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_KERNEL_TRACE       (1 << TIF_KERNEL_TRACE)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK          0x0000FFFE
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK       0x0000FFFF
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+/* FPU was used by this task this quantum (SMP) */
+#define TS_USEDFPU              0x0001
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
new file mode 100644
index 000000000000..678525dc6d0b
--- /dev/null
+++ b/arch/microblaze/include/asm/timex.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TIMEX_H
+#define _ASM_MICROBLAZE_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
+
+typedef unsigned long cycles_t;
+
+#define get_cycles()    (0)
+
+#endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
new file mode 100644
index 000000000000..d1dfe3791127
--- /dev/null
+++ b/arch/microblaze/include/asm/tlb.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TLB_H
+#define _ASM_MICROBLAZE_TLB_H
+
+#define tlb_flush(tlb)  do {} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_MICROBLAZE_TLB_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
new file mode 100644
index 000000000000..d7fe7629001b
--- /dev/null
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
+#define _ASM_MICROBLAZE_TLBFLUSH_H
+
+#define flush_tlb()                             BUG()
+#define flush_tlb_all()                         BUG()
+#define flush_tlb_mm(mm)                        BUG()
+#define flush_tlb_page(vma, addr)               BUG()
+#define flush_tlb_range(mm, start, end)         BUG()
+#define flush_tlb_pgtables(mm, start, end)      BUG()
+#define flush_tlb_kernel_range(start, end)      BUG()
+
+#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
diff --git a/arch/microblaze/include/asm/topology.h b/arch/microblaze/include/asm/topology.h
new file mode 100644
index 000000000000..96bcea5a9920
--- /dev/null
+++ b/arch/microblaze/include/asm/topology.h
@@ -0,0 +1,11 @@
+#include <asm-generic/topology.h>
+
+#ifndef _ASM_MICROBLAZE_TOPOLOGY_H
+#define _ASM_MICROBLAZE_TOPOLOGY_H
+
+struct device_node;
+static inline int of_node_to_nid(struct device_node *device)
+{
+        return 0;
+}
+#endif /* _ASM_MICROBLAZE_TOPOLOGY_H */
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
new file mode 100644
index 000000000000..bebc018318f5
--- /dev/null
+++ b/arch/microblaze/include/asm/types.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TYPES_H
+#define _ASM_MICROBLAZE_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#include <asm-generic/int-ll64.h>
+
+# ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#  ifdef __KERNEL__
+#  define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+
+#  endif/* __KERNEL__ */
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_TYPES_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
new file mode 100644
index 000000000000..5a3ffc308e12
--- /dev/null
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UACCESS_H
+#define _ASM_MICROBLAZE_UACCESS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sched.h> /* RLIMIT_FSIZE */
+#include <linux/mm.h>
+
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/segment.h>
+#include <linux/string.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+extern int ___range_ok(unsigned long addr, unsigned long size);
+
+#define __range_ok(addr, size) \
+                ___range_ok((unsigned long)(addr), (unsigned long)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
+
+extern inline int bad_user_access_length(void)
+{
+        return 0;
+}
+/* FIXME this is function for optimalization -> memcpy */
+#define __get_user(var, ptr)                                    \
+        ({                                                      \
+                int __gu_err = 0;                               \
+                switch (sizeof(*(ptr))) {                       \
+                case 1:                                         \
+                case 2:                                         \
+                case 4:                                         \
+                        (var) = *(ptr);                         \
+                        break;                                  \
+                case 8:                                         \
+                        memcpy((void *) &(var), (ptr), 8);      \
+                        break;                                  \
+                default:                                        \
+                        (var) = 0;                              \
+                        __gu_err = __get_user_bad();            \
+                        break;                                  \
+                }                                               \
+                __gu_err;                                       \
+        })
+
+#define __get_user_bad()        (bad_user_access_length(), (-EFAULT))
+
+#define __put_user(var, ptr)                                    \
+        ({                                                      \
+                int __pu_err = 0;                               \
+                switch (sizeof(*(ptr))) {                       \
+                case 1:                                         \
+                case 2:                                         \
+                case 4:                                         \
+                        *(ptr) = (var);                         \
+                        break;                                  \
+                case 8: {                                       \
+                        typeof(*(ptr)) __pu_val = var;          \
+                        memcpy(ptr, &__pu_val, sizeof(__pu_val));\
+                        }                                       \
+                        break;                                  \
+                default:                                        \
+                        __pu_err = __put_user_bad();            \
+                        break;                                  \
+                }                                                       \
+                __pu_err;                                               \
+        })
+
+#define __put_user_bad()        (bad_user_access_length(), (-EFAULT))
+
+#define put_user(x, ptr)        __put_user(x, ptr)
+#define get_user(x, ptr)        __get_user(x, ptr)
+
+#define copy_to_user(to, from, n)               (memcpy(to, from, n), 0)
+#define copy_from_user(to, from, n)             (memcpy(to, from, n), 0)
+
+#define __copy_to_user(to, from, n)             (copy_to_user(to, from, n))
+#define __copy_from_user(to, from, n)           (copy_from_user(to, from, n))
+#define __copy_to_user_inatomic(to, from, n)    (__copy_to_user(to, from, n))
+#define __copy_from_user_inatomic(to, from, n)  (__copy_from_user(to, from, n))
+
+#define __clear_user(addr, n)   (memset((void *)addr, 0, n), 0)
+
+static inline unsigned long clear_user(void *addr, unsigned long size)
+{
+        if (access_ok(VERIFY_WRITE, addr, size))
+                size = __clear_user(addr, size);
+        return size;
+}
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+        unsigned long insn, fixup;
+};
+
+#endif  /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_UACCESS_H */
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
new file mode 100644
index 000000000000..11f6bb3ae3a4
--- /dev/null
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UCONTEXT_H
+#define _ASM_MICROBLAZE_UCONTEXT_H
+
+#include <asm/sigcontext.h>
+
+struct ucontext {
+        unsigned long           uc_flags;
+        struct ucontext         *uc_link;
+        stack_t                 uc_stack;
+        struct sigcontext       uc_mcontext;
+        sigset_t                uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h
new file mode 100644
index 000000000000..9d66b640c910
--- /dev/null
+++ b/arch/microblaze/include/asm/unaligned.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UNALIGNED_H
+#define _ASM_MICROBLAZE_UNALIGNED_H
+
+# ifdef __KERNEL__
+
+# include <linux/unaligned/access_ok.h>
+# include <linux/unaligned/generic.h>
+
+# define get_unaligned  __get_unaligned_be
+# define put_unaligned  __put_unaligned_be
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_UNALIGNED_H */
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
new file mode 100644
index 000000000000..d9d3903fde3f
--- /dev/null
+++ b/arch/microblaze/include/asm/unistd.h
@@ -0,0 +1,421 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UNISTD_H
+#define _ASM_MICROBLAZE_UNISTD_H
+
+#define __NR_restart_syscall    0 /* ok */
+#define __NR_exit               1 /* ok */
+#define __NR_fork               2 /* not for no MMU - weird */
+#define __NR_read               3 /* ok */
+#define __NR_write              4 /* ok */
+#define __NR_open               5 /* openat */
+#define __NR_close              6 /* ok */
+#define __NR_waitpid            7 /* waitid */
+#define __NR_creat              8 /* openat */
+#define __NR_link               9 /* linkat */
+#define __NR_unlink             10 /* unlinkat */
+#define __NR_execve             11 /* ok */
+#define __NR_chdir              12 /* ok */
+#define __NR_time               13 /* obsolete -> sys_gettimeofday */
+#define __NR_mknod              14 /* mknodat */
+#define __NR_chmod              15 /* fchmodat */
+#define __NR_lchown             16 /* ok */
+#define __NR_break              17 /* don't know */
+#define __NR_oldstat            18 /* remove */
+#define __NR_lseek              19 /* ok */
+#define __NR_getpid             20 /* ok */
+#define __NR_mount              21 /* ok */
+#define __NR_umount             22 /* ok */  /* use only umount2 */
+#define __NR_setuid             23 /* ok */
+#define __NR_getuid             24 /* ok */
+#define __NR_stime              25 /* obsolete -> sys_settimeofday */
+#define __NR_ptrace             26 /* ok */
+#define __NR_alarm              27 /* obsolete -> sys_setitimer */
+#define __NR_oldfstat           28 /* remove */
+#define __NR_pause              29 /* obsolete -> sys_rt_sigtimedwait */
+#define __NR_utime              30 /* obsolete -> sys_utimesat */
+#define __NR_stty               31 /* remove */
+#define __NR_gtty               32 /* remove */
+#define __NR_access             33 /* faccessat */
+/* can be implemented by sys_setpriority */
+#define __NR_nice               34
+#define __NR_ftime              35 /* remove */
+#define __NR_sync               36 /* ok */
+#define __NR_kill               37 /* ok */
+#define __NR_rename             38 /* renameat */
+#define __NR_mkdir              39 /* mkdirat */
+#define __NR_rmdir              40 /* unlinkat */
+#define __NR_dup                41 /* ok */
+#define __NR_pipe               42 /* ok */
+#define __NR_times              43 /* ok */
+#define __NR_prof               44 /* remove */
+#define __NR_brk                45 /* ok -mmu, nommu specific */
+#define __NR_setgid             46 /* ok */
+#define __NR_getgid             47 /* ok */
+#define __NR_signal             48 /* obsolete -> sys_rt_sigaction */
+#define __NR_geteuid            49 /* ok */
+#define __NR_getegid            50 /* ok */
+#define __NR_acct               51 /* add it and then I can disable it */
+#define __NR_umount2            52 /* remove */
+#define __NR_lock               53 /* remove */
+#define __NR_ioctl              54 /* ok */
+#define __NR_fcntl              55 /* ok -> 64bit version*/
+#define __NR_mpx                56 /* remove */
+#define __NR_setpgid            57 /* ok */
+#define __NR_ulimit             58 /* remove */
+#define __NR_oldolduname        59 /* remove */
+#define __NR_umask              60 /* ok */
+#define __NR_chroot             61 /* ok */
+#define __NR_ustat              62 /* obsolete -> statfs64 */
+#define __NR_dup2               63 /* ok */
+#define __NR_getppid            64 /* ok */
+#define __NR_getpgrp            65 /* obsolete -> sys_getpgid */
+#define __NR_setsid             66 /* ok */
+#define __NR_sigaction          67 /* obsolete -> rt_sigaction */
+#define __NR_sgetmask           68 /* obsolete -> sys_rt_sigprocmask */
+#define __NR_ssetmask           69 /* obsolete ->sys_rt_sigprocmask */
+#define __NR_setreuid           70 /* ok */
+#define __NR_setregid           71 /* ok */
+#define __NR_sigsuspend         72 /* obsolete -> rt_sigsuspend */
+#define __NR_sigpending         73 /* obsolete -> sys_rt_sigpending */
+#define __NR_sethostname        74 /* ok */
+#define __NR_setrlimit          75 /* ok */
+#define __NR_getrlimit          76 /* ok Back compatible 2G limited rlimit */
+#define __NR_getrusage          77 /* ok */
+#define __NR_gettimeofday       78 /* ok */
+#define __NR_settimeofday       79 /* ok */
+#define __NR_getgroups          80 /* ok */
+#define __NR_setgroups          81 /* ok */
+#define __NR_select             82 /* obsolete -> sys_pselect7 */
+#define __NR_symlink            83 /* symlinkat */
+#define __NR_oldlstat           84 /* remove */
+#define __NR_readlink           85 /* obsolete -> sys_readlinkat */
+#define __NR_uselib             86 /* remove */
+#define __NR_swapon             87 /* ok */
+#define __NR_reboot             88 /* ok */
+#define __NR_readdir            89 /* remove ? */
+#define __NR_mmap               90 /* obsolete -> sys_mmap2 */
+#define __NR_munmap             91 /* ok - mmu and nommu */
+#define __NR_truncate           92 /* ok or truncate64 */
+#define __NR_ftruncate          93 /* ok or ftruncate64 */
+#define __NR_fchmod             94 /* ok */
+#define __NR_fchown             95 /* ok */
+#define __NR_getpriority        96 /* ok */
+#define __NR_setpriority        97 /* ok */
+#define __NR_profil             98 /* remove */
+#define __NR_statfs             99 /* ok or statfs64 */
+#define __NR_fstatfs            100  /* ok or fstatfs64 */
+#define __NR_ioperm             101 /* remove */
+#define __NR_socketcall         102 /* remove */
+#define __NR_syslog             103 /* ok */
+#define __NR_setitimer          104 /* ok */
+#define __NR_getitimer          105 /* ok */
+#define __NR_stat               106 /* remove */
+#define __NR_lstat              107 /* remove */
+#define __NR_fstat              108 /* remove */
+#define __NR_olduname           109 /* remove */
+#define __NR_iopl               110 /* remove */
+#define __NR_vhangup            111 /* ok */
+#define __NR_idle               112 /* remove */
+#define __NR_vm86old            113 /* remove */
+#define __NR_wait4              114 /* obsolete -> waitid */
+#define __NR_swapoff            115 /* ok */
+#define __NR_sysinfo            116 /* ok */
+#define __NR_ipc                117 /* remove - direct call */
+#define __NR_fsync              118 /* ok */
+#define __NR_sigreturn          119 /* obsolete -> sys_rt_sigreturn */
+#define __NR_clone              120 /* ok */
+#define __NR_setdomainname      121 /* ok */
+#define __NR_uname              122 /* remove */
+#define __NR_modify_ldt         123 /* remove */
+#define __NR_adjtimex           124 /* ok */
+#define __NR_mprotect           125 /* remove */
+#define __NR_sigprocmask        126 /* obsolete -> sys_rt_sigprocmask */
+#define __NR_create_module      127 /* remove */
+#define __NR_init_module        128 /* ok */
+#define __NR_delete_module      129 /* ok */
+#define __NR_get_kernel_syms    130 /* remove */
+#define __NR_quotactl           131 /* ok */
+#define __NR_getpgid            132 /* ok */
+#define __NR_fchdir             133 /* ok */
+#define __NR_bdflush            134 /* remove */
+#define __NR_sysfs              135 /* needed for busybox */
+#define __NR_personality        136 /* ok */
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138 /* ok */
+#define __NR_setfsgid           139 /* ok */
+#define __NR__llseek            140 /* remove only lseek */
+#define __NR_getdents           141 /* ok or getdents64 */
+#define __NR__newselect         142 /* remove */
+#define __NR_flock              143 /* ok */
+#define __NR_msync              144 /* remove */
+#define __NR_readv              145 /* ok */
+#define __NR_writev             146 /* ok */
+#define __NR_getsid             147 /* ok */
+#define __NR_fdatasync          148 /* ok */
+#define __NR__sysctl            149 /* remove */
+#define __NR_mlock              150 /* ok - nommu or mmu */
+#define __NR_munlock            151 /* ok - nommu or mmu */
+#define __NR_mlockall           152 /* ok - nommu or mmu */
+#define __NR_munlockall         153 /* ok - nommu or mmu */
+#define __NR_sched_setparam             154 /* ok */
+#define __NR_sched_getparam             155 /* ok */
+#define __NR_sched_setscheduler         156 /* ok */
+#define __NR_sched_getscheduler         157 /* ok */
+#define __NR_sched_yield                158 /* ok */
+#define __NR_sched_get_priority_max     159 /* ok */
+#define __NR_sched_get_priority_min     160 /* ok */
+#define __NR_sched_rr_get_interval      161 /* ok */
+#define __NR_nanosleep          162 /* ok */
+#define __NR_mremap             163 /* ok - nommu or mmu */
+#define __NR_setresuid          164 /* ok */
+#define __NR_getresuid          165 /* ok */
+#define __NR_vm86               166 /* remove */
+#define __NR_query_module       167 /* ok */
+#define __NR_poll               168 /* obsolete -> sys_ppoll */
+#define __NR_nfsservctl         169 /* ok */
+#define __NR_setresgid          170 /* ok */
+#define __NR_getresgid          171 /* ok */
+#define __NR_prctl              172 /* ok */
+#define __NR_rt_sigreturn       173 /* ok */
+#define __NR_rt_sigaction       174 /* ok */
+#define __NR_rt_sigprocmask     175 /* ok */
+#define __NR_rt_sigpending      176 /* ok */
+#define __NR_rt_sigtimedwait    177 /* ok */
+#define __NR_rt_sigqueueinfo    178 /* ok */
+#define __NR_rt_sigsuspend      179 /* ok */
+#define __NR_pread64            180 /* ok */
+#define __NR_pwrite64           181 /* ok */
+#define __NR_chown              182 /* obsolete -> fchownat */
+#define __NR_getcwd             183 /* ok */
+#define __NR_capget             184 /* ok */
+#define __NR_capset             185 /* ok */
+#define __NR_sigaltstack        186 /* remove */
+#define __NR_sendfile           187 /* ok -> exist 64bit version*/
+#define __NR_getpmsg            188 /* remove */
+/* remove - some people actually want streams */
+#define __NR_putpmsg            189
+/* for noMMU - group with clone -> maybe remove */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191 /* remove - SuS compliant getrlimit */
+#define __NR_mmap2              192 /* ok */
+#define __NR_truncate64         193 /* ok */
+#define __NR_ftruncate64        194 /* ok */
+#define __NR_stat64             195 /* remove _ARCH_WANT_STAT64 */
+#define __NR_lstat64            196 /* remove _ARCH_WANT_STAT64 */
+#define __NR_fstat64            197 /* remove _ARCH_WANT_STAT64 */
+#define __NR_lchown32           198 /* ok - without 32 */
+#define __NR_getuid32           199 /* ok - without 32 */
+#define __NR_getgid32           200 /* ok - without 32 */
+#define __NR_geteuid32          201 /* ok - without 32 */
+#define __NR_getegid32          202 /* ok - without 32 */
+#define __NR_setreuid32         203 /* ok - without 32 */
+#define __NR_setregid32         204 /* ok - without 32 */
+#define __NR_getgroups32        205 /* ok - without 32 */
+#define __NR_setgroups32        206 /* ok - without 32 */
+#define __NR_fchown32           207 /* ok - without 32 */
+#define __NR_setresuid32        208 /* ok - without 32 */
+#define __NR_getresuid32        209 /* ok - without 32 */
+#define __NR_setresgid32        210 /* ok - without 32 */
+#define __NR_getresgid32        211 /* ok - without 32 */
+#define __NR_chown32            212 /* ok - without 32 -obsolete -> fchownat */
+#define __NR_setuid32           213 /* ok - without 32 */
+#define __NR_setgid32           214 /* ok - without 32 */
+#define __NR_setfsuid32         215 /* ok - without 32 */
+#define __NR_setfsgid32         216 /* ok - without 32 */
+#define __NR_pivot_root         217 /* ok */
+#define __NR_mincore            218 /* ok */
+#define __NR_madvise            219 /* ok */
+#define __NR_getdents64         220 /* ok */
+#define __NR_fcntl64            221 /* ok */
+/* 223 is unused */
+#define __NR_gettid             224 /* ok */
+#define __NR_readahead          225 /* ok */
+#define __NR_setxattr           226 /* ok */
+#define __NR_lsetxattr          227 /* ok */
+#define __NR_fsetxattr          228 /* ok */
+#define __NR_getxattr           229 /* ok */
+#define __NR_lgetxattr          230 /* ok */
+#define __NR_fgetxattr          231 /* ok */
+#define __NR_listxattr          232 /* ok */
+#define __NR_llistxattr         233 /* ok */
+#define __NR_flistxattr         234 /* ok */
+#define __NR_removexattr        235 /* ok */
+#define __NR_lremovexattr       236 /* ok */
+#define __NR_fremovexattr       237 /* ok */
+#define __NR_tkill              238 /* ok */
+#define __NR_sendfile64         239 /* ok */
+#define __NR_futex              240 /* ok */
+#define __NR_sched_setaffinity  241 /* ok */
+#define __NR_sched_getaffinity  242 /* ok */
+#define __NR_set_thread_area    243 /* remove */
+#define __NR_get_thread_area    244 /* remove */
+#define __NR_io_setup           245 /* ok */
+#define __NR_io_destroy         246 /* ok */
+#define __NR_io_getevents       247 /* ok */
+#define __NR_io_submit          248 /* ok */
+#define __NR_io_cancel          249 /* ok */
+#define __NR_fadvise64          250 /* remove -> sys_fadvise64_64 */
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
+#define __NR_exit_group         252 /* ok */
+#define __NR_lookup_dcookie     253 /* ok */
+#define __NR_epoll_create       254 /* ok */
+#define __NR_epoll_ctl          255 /* ok */
+#define __NR_epoll_wait         256 /* obsolete -> sys_epoll_pwait */
+#define __NR_remap_file_pages   257 /* only for mmu */
+#define __NR_set_tid_address    258 /* ok */
+#define __NR_timer_create       259 /* ok */
+#define __NR_timer_settime      (__NR_timer_create+1) /* 260 */ /* ok */
+#define __NR_timer_gettime      (__NR_timer_create+2) /* 261 */ /* ok */
+#define __NR_timer_getoverrun   (__NR_timer_create+3) /* 262 */ /* ok */
+#define __NR_timer_delete       (__NR_timer_create+4) /* 263 */ /* ok */
+#define __NR_clock_settime      (__NR_timer_create+5) /* 264 */ /* ok */
+#define __NR_clock_gettime      (__NR_timer_create+6) /* 265 */ /* ok */
+#define __NR_clock_getres       (__NR_timer_create+7) /* 266 */ /* ok */
+#define __NR_clock_nanosleep    (__NR_timer_create+8) /* 267 */ /* ok */
+#define __NR_statfs64           268 /* ok */
+#define __NR_fstatfs64          269 /* ok */
+#define __NR_tgkill             270 /* ok */
+#define __NR_utimes             271 /* obsolete -> sys_futimesat */
+#define __NR_fadvise64_64       272 /* ok */
+#define __NR_vserver            273 /* ok */
+#define __NR_mbind              274 /* only for mmu */
+#define __NR_get_mempolicy      275 /* only for mmu */
+#define __NR_set_mempolicy      276 /* only for mmu */
+#define __NR_mq_open            277 /* ok */
+#define __NR_mq_unlink          (__NR_mq_open+1) /* 278 */ /* ok */
+#define __NR_mq_timedsend       (__NR_mq_open+2) /* 279 */ /* ok */
+#define __NR_mq_timedreceive    (__NR_mq_open+3) /* 280 */ /* ok */
+#define __NR_mq_notify          (__NR_mq_open+4) /* 281 */ /* ok */
+#define __NR_mq_getsetattr      (__NR_mq_open+5) /* 282 */ /* ok */
+#define __NR_kexec_load         283 /* ok */
+#define __NR_waitid             284 /* ok */
+/* #define __NR_sys_setaltroot  285 */
+#define __NR_add_key            286 /* ok */
+#define __NR_request_key        287 /* ok */
+#define __NR_keyctl             288 /* ok */
+#define __NR_ioprio_set         289 /* ok */
+#define __NR_ioprio_get         290 /* ok */
+#define __NR_inotify_init       291 /* ok */
+#define __NR_inotify_add_watch  292 /* ok */
+#define __NR_inotify_rm_watch   293 /* ok */
+#define __NR_migrate_pages      294 /* mmu */
+#define __NR_openat             295 /* ok */
+#define __NR_mkdirat            296 /* ok */
+#define __NR_mknodat            297 /* ok */
+#define __NR_fchownat           298 /* ok */
+#define __NR_futimesat          299 /* obsolete -> sys_utimesat */
+#define __NR_fstatat64          300 /* stat64 */
+#define __NR_unlinkat           301 /* ok */
+#define __NR_renameat           302 /* ok */
+#define __NR_linkat             303 /* ok */
+#define __NR_symlinkat          304 /* ok */
+#define __NR_readlinkat         305 /* ok */
+#define __NR_fchmodat           306 /* ok */
+#define __NR_faccessat          307 /* ok */
+#define __NR_pselect6           308 /* obsolete -> sys_pselect7 */
+#define __NR_ppoll              309 /* ok */
+#define __NR_unshare            310 /* ok */
+#define __NR_set_robust_list    311 /* ok */
+#define __NR_get_robust_list    312 /* ok */
+#define __NR_splice             313 /* ok */
+#define __NR_sync_file_range    314 /* ok */
+#define __NR_tee                315 /* ok */
+#define __NR_vmsplice           316 /* ok */
+#define __NR_move_pages         317 /* mmu */
+#define __NR_getcpu             318 /* ok */
+#define __NR_epoll_pwait        319 /* ok */
+#define __NR_utimensat          320 /* ok */
+#define __NR_signalfd           321 /* ok */
+#define __NR_timerfd_create     322 /* ok */
+#define __NR_eventfd            323 /* ok */
+#define __NR_fallocate          324 /* ok */
+#define __NR_semtimedop         325 /* ok - semaphore group */
+#define __NR_timerfd_settime    326 /* ok */
+#define __NR_timerfd_gettime    327 /* ok */
+/* sysv ipc syscalls */
+#define __NR_semctl             328 /* ok */
+#define __NR_semget             329 /* ok */
+#define __NR_semop              330 /* ok */
+#define __NR_msgctl             331 /* ok */
+#define __NR_msgget             332 /* ok */
+#define __NR_msgrcv             333 /* ok */
+#define __NR_msgsnd             334 /* ok */
+#define __NR_shmat              335 /* ok */
+#define __NR_shmctl             336 /* ok */
+#define __NR_shmdt              337 /* ok */
+#define __NR_shmget             338 /* ok */
+
+
+#define __NR_signalfd4          339 /* new */
+#define __NR_eventfd2           340 /* new */
+#define __NR_epoll_create1      341 /* new */
+#define __NR_dup3               342 /* new */
+#define __NR_pipe2              343 /* new */
+#define __NR_inotify_init1      344 /* new */
+#define __NR_socket             345 /* new */
+#define __NR_socketpair         346 /* new */
+#define __NR_bind               347 /* new */
+#define __NR_listen             348 /* new */
+#define __NR_accept             349 /* new */
+#define __NR_connect            350 /* new */
+#define __NR_getsockname        351 /* new */
+#define __NR_getpeername        352 /* new */
+#define __NR_sendto             353 /* new */
+#define __NR_send               354 /* new */
+#define __NR_recvfrom           355 /* new */
+#define __NR_recv               356 /* new */
+#define __NR_setsockopt         357 /* new */
+#define __NR_getsockopt         358 /* new */
+#define __NR_shutdown           359 /* new */
+#define __NR_sendmsg            360 /* new */
+#define __NR_recvmsg            361 /* new */
+#define __NR_accept04           362 /* new */
+
+#define __NR_syscalls           363
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+/* #define __ARCH_WANT_OLD_READDIR */
+/* #define __ARCH_WANT_OLD_STAT */
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/include/asm/user.h b/arch/microblaze/include/asm/user.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/microblaze/include/asm/user.h
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/microblaze/include/asm/vga.h
diff --git a/arch/microblaze/include/asm/xor.h b/arch/microblaze/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/microblaze/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
new file mode 100644
index 000000000000..da94bec4ecba
--- /dev/null
+++ b/arch/microblaze/kernel/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile
+#
+
+extra-y := head.o vmlinux.lds
+
+obj-y += exceptions.o \
+        hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
+        of_platform.o process.o prom.o prom_parse.o ptrace.o \
+        setup.o signal.o sys_microblaze.o timer.o traps.o
+
+obj-y += cpu/
+
+obj-$(CONFIG_EARLY_PRINTK)      += early_printk.o
+obj-$(CONFIG_SELFMOD)           += selfmod.o
+obj-$(CONFIG_HEART_BEAT)        += heartbeat.o
+obj-$(CONFIG_MODULES)           += microblaze_ksyms.o module.o
+
+obj-y   += entry$(MMUEXT).o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
new file mode 100644
index 000000000000..38e1a2e8ad0c
--- /dev/null
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+
+int main(int argc, char *argv[])
+{
+        /* struct pt_regs */
+        DEFINE(PT_SIZE, sizeof(struct pt_regs));
+        DEFINE(PT_MSR, offsetof(struct pt_regs, msr));
+        DEFINE(PT_EAR, offsetof(struct pt_regs, ear));
+        DEFINE(PT_ESR, offsetof(struct pt_regs, esr));
+        DEFINE(PT_FSR, offsetof(struct pt_regs, fsr));
+        DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+        DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+        DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+        DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+        DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+        DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+        DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+        DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+        DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+        DEFINE(PT_R8, offsetof(struct pt_regs, r8));
+        DEFINE(PT_R9, offsetof(struct pt_regs, r9));
+        DEFINE(PT_R10, offsetof(struct pt_regs, r10));
+        DEFINE(PT_R11, offsetof(struct pt_regs, r11));
+        DEFINE(PT_R12, offsetof(struct pt_regs, r12));
+        DEFINE(PT_R13, offsetof(struct pt_regs, r13));
+        DEFINE(PT_R14, offsetof(struct pt_regs, r14));
+        DEFINE(PT_R15, offsetof(struct pt_regs, r15));
+        DEFINE(PT_R16, offsetof(struct pt_regs, r16));
+        DEFINE(PT_R17, offsetof(struct pt_regs, r17));
+        DEFINE(PT_R18, offsetof(struct pt_regs, r18));
+        DEFINE(PT_R19, offsetof(struct pt_regs, r19));
+        DEFINE(PT_R20, offsetof(struct pt_regs, r20));
+        DEFINE(PT_R21, offsetof(struct pt_regs, r21));
+        DEFINE(PT_R22, offsetof(struct pt_regs, r22));
+        DEFINE(PT_R23, offsetof(struct pt_regs, r23));
+        DEFINE(PT_R24, offsetof(struct pt_regs, r24));
+        DEFINE(PT_R25, offsetof(struct pt_regs, r25));
+        DEFINE(PT_R26, offsetof(struct pt_regs, r26));
+        DEFINE(PT_R27, offsetof(struct pt_regs, r27));
+        DEFINE(PT_R28, offsetof(struct pt_regs, r28));
+        DEFINE(PT_R29, offsetof(struct pt_regs, r29));
+        DEFINE(PT_R30, offsetof(struct pt_regs, r30));
+        DEFINE(PT_R31, offsetof(struct pt_regs, r31));
+        DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode));
+        BLANK();
+
+        /* Magic offsets for PTRACE PEEK/POKE etc */
+        DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs) + 1);
+        DEFINE(PT_TEXT_LEN, sizeof(struct pt_regs) + 2);
+        DEFINE(PT_DATA_ADDR, sizeof(struct pt_regs) + 3);
+        BLANK();
+
+        /* struct task_struct */
+        DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+
+        /* struct thread_info */
+        DEFINE(TI_TASK, offsetof(struct thread_info, task));
+        DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
+        DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+        DEFINE(TI_STATUS, offsetof(struct thread_info, status));
+        DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+        DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
+        DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
+        DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
+        DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+        BLANK();
+
+        /* struct cpu_context */
+        DEFINE(CC_R1, offsetof(struct cpu_context, r1)); /* r1 */
+        DEFINE(CC_R2, offsetof(struct cpu_context, r2));
+        /* dedicated registers */
+        DEFINE(CC_R13, offsetof(struct cpu_context, r13));
+        DEFINE(CC_R14, offsetof(struct cpu_context, r14));
+        DEFINE(CC_R15, offsetof(struct cpu_context, r15));
+        DEFINE(CC_R16, offsetof(struct cpu_context, r16));
+        DEFINE(CC_R17, offsetof(struct cpu_context, r17));
+        DEFINE(CC_R18, offsetof(struct cpu_context, r18));
+        /* non-volatile registers */
+        DEFINE(CC_R19, offsetof(struct cpu_context, r19));
+        DEFINE(CC_R20, offsetof(struct cpu_context, r20));
+        DEFINE(CC_R21, offsetof(struct cpu_context, r21));
+        DEFINE(CC_R22, offsetof(struct cpu_context, r22));
+        DEFINE(CC_R23, offsetof(struct cpu_context, r23));
+        DEFINE(CC_R24, offsetof(struct cpu_context, r24));
+        DEFINE(CC_R25, offsetof(struct cpu_context, r25));
+        DEFINE(CC_R26, offsetof(struct cpu_context, r26));
+        DEFINE(CC_R27, offsetof(struct cpu_context, r27));
+        DEFINE(CC_R28, offsetof(struct cpu_context, r28));
+        DEFINE(CC_R29, offsetof(struct cpu_context, r29));
+        DEFINE(CC_R30, offsetof(struct cpu_context, r30));
+        /* special purpose registers */
+        DEFINE(CC_MSR, offsetof(struct cpu_context, msr));
+        DEFINE(CC_EAR, offsetof(struct cpu_context, ear));
+        DEFINE(CC_ESR, offsetof(struct cpu_context, esr));
+        DEFINE(CC_FSR, offsetof(struct cpu_context, fsr));
+        BLANK();
+
+        return 0;
+}
diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile
new file mode 100644
index 000000000000..20646e549271
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/Makefile
@@ -0,0 +1,8 @@
+#
+# Build the appropriate CPU version support
+#
+
+EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
+                -DCPU_REV=$(CPU_REV)
+
+obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
new file mode 100644
index 000000000000..be9fecca4f91
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -0,0 +1,258 @@
+/*
+ * Cache control for MicroBlaze cache memories
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/cache.h>
+#include <asm/cpuinfo.h>
+
+/* Exported functions */
+
+void _enable_icache(void)
+{
+        if (cpuinfo.use_icache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+                __asm__ __volatile__ ("                                 \
+                                msrset  r0, %0;                         \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_ICE)                         \
+                                : "memory");
+#else
+                __asm__ __volatile__ ("                                 \
+                                mfs     r12, rmsr;                      \
+                                nop;                                    \
+                                ori     r12, r12, %0;                   \
+                                mts     rmsr, r12;                      \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_ICE)                         \
+                                : "memory", "r12");
+#endif
+        }
+}
+
+void _disable_icache(void)
+{
+        if (cpuinfo.use_icache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+                __asm__ __volatile__ ("                                 \
+                                msrclr r0, %0;                          \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_ICE)                         \
+                                : "memory");
+#else
+                __asm__ __volatile__ ("                                 \
+                                mfs     r12, rmsr;                      \
+                                nop;                                    \
+                                andi    r12, r12, ~%0;                  \
+                                mts     rmsr, r12;                      \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_ICE)                         \
+                                : "memory", "r12");
+#endif
+        }
+}
+
+void _invalidate_icache(unsigned int addr)
+{
+        if (cpuinfo.use_icache) {
+                __asm__ __volatile__ ("                                 \
+                                wic     %0, r0"                         \
+                                :                                       \
+                                : "r" (addr));
+        }
+}
+
+void _enable_dcache(void)
+{
+        if (cpuinfo.use_dcache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+                __asm__ __volatile__ ("                                 \
+                                msrset  r0, %0;                         \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_DCE)                         \
+                                : "memory");
+#else
+                __asm__ __volatile__ ("                                 \
+                                mfs     r12, rmsr;                      \
+                                nop;                                    \
+                                ori     r12, r12, %0;                   \
+                                mts     rmsr, r12;                      \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_DCE)                 \
+                                : "memory", "r12");
+#endif
+        }
+}
+
+void _disable_dcache(void)
+{
+        if (cpuinfo.use_dcache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+                __asm__ __volatile__ ("                                 \
+                                msrclr  r0, %0;                         \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_DCE)                 \
+                                : "memory");
+#else
+                __asm__ __volatile__ ("                                 \
+                                mfs     r12, rmsr;                      \
+                                nop;                                    \
+                                andi    r12, r12, ~%0;                  \
+                                mts     rmsr, r12;                      \
+                                nop; "                                  \
+                                :                                       \
+                                : "i" (MSR_DCE)                 \
+                                : "memory", "r12");
+#endif
+        }
+}
+
+void _invalidate_dcache(unsigned int addr)
+{
+        if (cpuinfo.use_dcache)
+                __asm__ __volatile__ ("                                 \
+                                wdc     %0, r0"                         \
+                                :                                       \
+                                : "r" (addr));
+}
+
+void __invalidate_icache_all(void)
+{
+        unsigned int i;
+        unsigned flags;
+
+        if (cpuinfo.use_icache) {
+                local_irq_save(flags);
+                __disable_icache();
+
+                /* Just loop through cache size and invalidate, no need to add
+                        CACHE_BASE address */
+                for (i = 0; i < cpuinfo.icache_size;
+                        i += cpuinfo.icache_line)
+                                __invalidate_icache(i);
+
+                __enable_icache();
+                local_irq_restore(flags);
+        }
+}
+
+void __invalidate_icache_range(unsigned long start, unsigned long end)
+{
+        unsigned int i;
+        unsigned flags;
+        unsigned int align;
+
+        if (cpuinfo.use_icache) {
+                /*
+                 * No need to cover entire cache range,
+                 * just cover cache footprint
+                 */
+                end = min(start + cpuinfo.icache_size, end);
+                align = ~(cpuinfo.icache_line - 1);
+                start &= align; /* Make sure we are aligned */
+                /* Push end up to the next cache line */
+                end = ((end & align) + cpuinfo.icache_line);
+
+                local_irq_save(flags);
+                __disable_icache();
+
+                for (i = start; i < end; i += cpuinfo.icache_line)
+                        __invalidate_icache(i);
+
+                __enable_icache();
+                local_irq_restore(flags);
+        }
+}
+
+void __invalidate_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+        __invalidate_icache_all();
+}
+
+void __invalidate_icache_user_range(struct vm_area_struct *vma,
+                                struct page *page, unsigned long adr,
+                                int len)
+{
+        __invalidate_icache_all();
+}
+
+void __invalidate_cache_sigtramp(unsigned long addr)
+{
+        __invalidate_icache_range(addr, addr + 8);
+}
+
+void __invalidate_dcache_all(void)
+{
+        unsigned int i;
+        unsigned flags;
+
+        if (cpuinfo.use_dcache) {
+                local_irq_save(flags);
+                __disable_dcache();
+
+                /*
+                 * Just loop through cache size and invalidate,
+                 * no need to add CACHE_BASE address
+                 */
+                for (i = 0; i < cpuinfo.dcache_size;
+                        i += cpuinfo.dcache_line)
+                                __invalidate_dcache(i);
+
+                __enable_dcache();
+                local_irq_restore(flags);
+        }
+}
+
+void __invalidate_dcache_range(unsigned long start, unsigned long end)
+{
+        unsigned int i;
+        unsigned flags;
+        unsigned int align;
+
+        if (cpuinfo.use_dcache) {
+                /*
+                 * No need to cover entire cache range,
+                 * just cover cache footprint
+                 */
+                end = min(start + cpuinfo.dcache_size, end);
+                align = ~(cpuinfo.dcache_line - 1);
+                start &= align; /* Make sure we are aligned */
+                /* Push end up to the next cache line */
+                end = ((end & align) + cpuinfo.dcache_line);
+                local_irq_save(flags);
+                __disable_dcache();
+
+                for (i = start; i < end; i += cpuinfo.dcache_line)
+                        __invalidate_dcache(i);
+
+                __enable_dcache();
+                local_irq_restore(flags);
+        }
+}
+
+void __invalidate_dcache_page(struct vm_area_struct *vma, struct page *page)
+{
+        __invalidate_dcache_all();
+}
+
+void __invalidate_dcache_user_range(struct vm_area_struct *vma,
+                                struct page *page, unsigned long adr,
+                                int len)
+{
+        __invalidate_dcache_all();
+}
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
new file mode 100644
index 000000000000..cf7424a6bb87
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -0,0 +1,101 @@
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/pvr.h>
+#include <asm/cpuinfo.h>
+
+/*
+ * Helper macro to map between fields in our struct cpuinfo, and
+ * the PVR macros in pvr.h.
+ */
+
+#define CI(c, p) { ci->c = PVR_##p(pvr); }
+#define err_printk(x) \
+        early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
+{
+        struct pvr_s pvr;
+        int temp; /* for saving temp value */
+        get_pvr(&pvr);
+
+        temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\
+                PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
+        if (ci->use_instr != temp)
+                err_printk("BARREL, MSR, PCMP or DIV");
+        ci->use_instr = temp;
+
+        temp = PVR_USE_HW_MUL(pvr) | PVR_USE_MUL64(pvr);
+        if (ci->use_mult != temp)
+                err_printk("HW_MUL");
+        ci->use_mult = temp;
+
+        temp = PVR_USE_FPU(pvr) | PVR_USE_FPU2(pvr);
+        if (ci->use_fpu != temp)
+                err_printk("HW_FPU");
+        ci->use_fpu = temp;
+
+        ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |\
+                        PVR_UNALIGNED_EXCEPTION(pvr) |\
+                        PVR_ILL_OPCODE_EXCEPTION(pvr) |\
+                        PVR_IOPB_BUS_EXCEPTION(pvr) |\
+                        PVR_DOPB_BUS_EXCEPTION(pvr) |\
+                        PVR_DIV_ZERO_EXCEPTION(pvr) |\
+                        PVR_FPU_EXCEPTION(pvr) |\
+                        PVR_FSL_EXCEPTION(pvr);
+
+        CI(pvr_user1, USER1);
+        CI(pvr_user2, USER2);
+
+        CI(mmu, USE_MMU);
+
+        CI(ver_code, VERSION);
+
+        CI(use_icache, USE_ICACHE);
+        CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
+        CI(icache_write, ICACHE_ALLOW_WR);
+        CI(icache_line, ICACHE_LINE_LEN);
+        CI(icache_size, ICACHE_BYTE_SIZE);
+        CI(icache_base, ICACHE_BASEADDR);
+        CI(icache_high, ICACHE_HIGHADDR);
+
+        CI(use_dcache, USE_DCACHE);
+        CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS);
+        CI(dcache_write, DCACHE_ALLOW_WR);
+        CI(dcache_line, DCACHE_LINE_LEN);
+        CI(dcache_size, DCACHE_BYTE_SIZE);
+        CI(dcache_base, DCACHE_BASEADDR);
+        CI(dcache_high, DCACHE_HIGHADDR);
+
+        CI(use_dopb, D_OPB);
+        CI(use_iopb, I_OPB);
+        CI(use_dlmb, D_LMB);
+        CI(use_ilmb, I_LMB);
+        CI(num_fsl, FSL_LINKS);
+
+        CI(irq_edge, INTERRUPT_IS_EDGE);
+        CI(irq_positive, EDGE_IS_POSITIVE);
+
+        CI(area_optimised, AREA_OPTIMISED);
+
+        CI(hw_debug, DEBUG_ENABLED);
+        CI(num_pc_brk, NUMBER_OF_PC_BRK);
+        CI(num_rd_brk, NUMBER_OF_RD_ADDR_BRK);
+        CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK);
+
+        CI(fpga_family_code, TARGET_FAMILY);
+
+        /* take timebase-frequency from DTS */
+        ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency");
+}
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
new file mode 100644
index 000000000000..cfe44effdb77
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+
+#define err_printk(x) \
+        early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+
+void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
+{
+        int i = 0;
+
+        ci->use_instr =
+                (fcpu(cpu, "xlnx,use-barrel") ? PVR0_USE_BARREL_MASK : 0) |
+                (fcpu(cpu, "xlnx,use-msr-instr") ? PVR2_USE_MSR_INSTR : 0) |
+                (fcpu(cpu, "xlnx,use-pcmp-instr") ? PVR2_USE_PCMP_INSTR : 0) |
+                (fcpu(cpu, "xlnx,use-div") ? PVR0_USE_DIV_MASK : 0);
+        if (CONFIG_XILINX_MICROBLAZE0_USE_BARREL)
+                i |= PVR0_USE_BARREL_MASK;
+        if (CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR)
+                i |= PVR2_USE_MSR_INSTR;
+        if (CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR)
+                i |= PVR2_USE_PCMP_INSTR;
+        if (CONFIG_XILINX_MICROBLAZE0_USE_DIV)
+                i |= PVR0_USE_DIV_MASK;
+        if (ci->use_instr != i)
+                err_printk("BARREL, MSR, PCMP or DIV");
+
+        ci->use_mult = fcpu(cpu, "xlnx,use-hw-mul");
+        if (ci->use_mult != CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)
+                err_printk("HW_MUL");
+        ci->use_mult =
+                (ci->use_mult > 1 ?
+                                (PVR2_USE_MUL64_MASK | PVR0_USE_HW_MUL_MASK) :
+                                (ci->use_mult == 1 ? PVR0_USE_HW_MUL_MASK : 0));
+
+        ci->use_fpu = fcpu(cpu, "xlnx,use-fpu");
+        if (ci->use_fpu != CONFIG_XILINX_MICROBLAZE0_USE_FPU)
+                err_printk("HW_FPU");
+        ci->use_fpu = (ci->use_fpu > 1 ?
+                                (PVR2_USE_FPU2_MASK | PVR0_USE_FPU_MASK) :
+                                (ci->use_fpu == 1 ? PVR0_USE_FPU_MASK : 0));
+
+        ci->use_exc =
+                (fcpu(cpu, "xlnx,unaligned-exceptions") ?
+                                PVR2_UNALIGNED_EXC_MASK : 0) |
+                (fcpu(cpu, "xlnx,ill-opcode-exception") ?
+                                PVR2_ILL_OPCODE_EXC_MASK : 0) |
+                (fcpu(cpu, "xlnx,iopb-bus-exception") ?
+                                PVR2_IOPB_BUS_EXC_MASK : 0) |
+                (fcpu(cpu, "xlnx,dopb-bus-exception") ?
+                                PVR2_DOPB_BUS_EXC_MASK : 0) |
+                (fcpu(cpu, "xlnx,div-zero-exception") ?
+                                PVR2_DIV_ZERO_EXC_MASK : 0) |
+                (fcpu(cpu, "xlnx,fpu-exception") ? PVR2_FPU_EXC_MASK : 0) |
+                (fcpu(cpu, "xlnx,fsl-exception") ? PVR2_USE_EXTEND_FSL : 0);
+
+        ci->use_icache = fcpu(cpu, "xlnx,use-icache");
+        ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits");
+        ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr");
+        ci->icache_line = fcpu(cpu, "xlnx,icache-line-len") << 2;
+        if (!ci->icache_line) {
+                if (fcpu(cpu, "xlnx,icache-use-fsl"))
+                        ci->icache_line = 4 << 2;
+                else
+                        ci->icache_line = 1 << 2;
+        }
+        ci->icache_size = fcpu(cpu, "i-cache-size");
+        ci->icache_base = fcpu(cpu, "i-cache-baseaddr");
+        ci->icache_high = fcpu(cpu, "i-cache-highaddr");
+
+        ci->use_dcache = fcpu(cpu, "xlnx,use-dcache");
+        ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag");
+        ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr");
+        ci->dcache_line = fcpu(cpu, "xlnx,dcache-line-len") << 2;
+        if (!ci->dcache_line) {
+                if (fcpu(cpu, "xlnx,dcache-use-fsl"))
+                        ci->dcache_line = 4 << 2;
+                else
+                        ci->dcache_line = 1 << 2;
+        }
+        ci->dcache_size = fcpu(cpu, "d-cache-size");
+        ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
+        ci->dcache_high = fcpu(cpu, "d-cache-highaddr");
+
+        ci->use_dopb = fcpu(cpu, "xlnx,d-opb");
+        ci->use_iopb = fcpu(cpu, "xlnx,i-opb");
+        ci->use_dlmb = fcpu(cpu, "xlnx,d-lmb");
+        ci->use_ilmb = fcpu(cpu, "xlnx,i-lmb");
+
+        ci->num_fsl = fcpu(cpu, "xlnx,fsl-links");
+        ci->irq_edge = fcpu(cpu, "xlnx,interrupt-is-edge");
+        ci->irq_positive = fcpu(cpu, "xlnx,edge-is-positive");
+        ci->area_optimised = 0;
+
+        ci->hw_debug = fcpu(cpu, "xlnx,debug-enabled");
+        ci->num_pc_brk = fcpu(cpu, "xlnx,number-of-pc-brk");
+        ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk");
+        ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk");
+
+        ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency");
+
+        ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1");
+        ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2");
+
+        ci->mmu = fcpu(cpu, "xlnx,use-mmu");
+
+        ci->ver_code = 0;
+        ci->fpga_family_code = 0;
+
+        /* Do various fixups based on CPU version and FPGA family strings */
+
+        /* Resolved the CPU version code */
+        for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+                if (strcmp(cpu_ver_lookup[i].s, cpu_ver_string) == 0)
+                        ci->ver_code = cpu_ver_lookup[i].k;
+        }
+
+        /* Resolved the fpga family code */
+        for (i = 0; family_string_lookup[i].s != NULL; i++) {
+                if (strcmp(family_string_lookup[i].s, family_string) == 0)
+                        ci->fpga_family_code = family_string_lookup[i].k;
+        }
+
+        /* FIXME - mb3 and spartan2 do not exist in PVR */
+        /* This is mb3 and on a non Spartan2 */
+        if (ci->ver_code == 0x20 && ci->fpga_family_code != 0xf0)
+                /* Hardware Multiplier in use */
+                ci->use_mult = 1;
+}
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
new file mode 100644
index 000000000000..4a740dfcf6da
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+const struct cpu_ver_key cpu_ver_lookup[] = {
+        /* These key value are as per MBV field in PVR0 */
+        {"5.00.a", 0x01},
+        {"5.00.b", 0x02},
+        {"5.00.c", 0x03},
+        {"6.00.a", 0x04},
+        {"6.00.b", 0x06},
+        {"7.00.a", 0x05},
+        {"7.00.b", 0x07},
+        {"7.10.a", 0x08},
+        {"7.10.b", 0x09},
+        {"7.10.c", 0x0a},
+        {"7.10.d", 0x0b},
+        /* FIXME There is no keycode defined in MBV for these versions */
+        {"2.10.a", 0x10},
+        {"3.00.a", 0x20},
+        {"4.00.a", 0x30},
+        {"4.00.b", 0x40},
+        {NULL, 0},
+};
+
+/*
+ * FIXME Not sure if the actual key is defined by Xilinx in the PVR
+ */
+const struct family_string_key family_string_lookup[] = {
+        {"virtex2", 0x4},
+        {"virtex2pro", 0x5},
+        {"spartan3", 0x6},
+        {"virtex4", 0x7},
+        {"virtex5", 0x8},
+        {"spartan3e", 0x9},
+        {"spartan3a", 0xa},
+        {"spartan3an", 0xb},
+        {"spartan3adsp", 0xc},
+        /* FIXME There is no key code defined for spartan2 */
+        {"spartan2", 0xf0},
+        {NULL, 0},
+};
+
+struct cpuinfo cpuinfo;
+
+void __init setup_cpuinfo(void)
+{
+        struct device_node *cpu = NULL;
+
+        cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu");
+        if (!cpu)
+                printk(KERN_ERR "You don't have cpu!!!\n");
+
+        printk(KERN_INFO "%s: initialising\n", __func__);
+
+        switch (cpu_has_pvr()) {
+        case 0:
+                printk(KERN_WARNING
+                        "%s: No PVR support. Using static CPU info from FDT\n",
+                        __func__);
+                set_cpuinfo_static(&cpuinfo, cpu);
+                break;
+/* FIXME I found weird behavior with MB 7.00.a/b
+ * please do not use FULL PVR with MMU */
+        case 1:
+                printk(KERN_INFO "%s: Using full CPU PVR support\n",
+                        __func__);
+                set_cpuinfo_static(&cpuinfo, cpu);
+                set_cpuinfo_pvr_full(&cpuinfo, cpu);
+                break;
+        default:
+                printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__);
+                set_cpuinfo_static(&cpuinfo, cpu);
+        }
+}
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
new file mode 100644
index 000000000000..3b6212bdc8dc
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -0,0 +1,148 @@
+/*
+ * CPU-version specific code
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006-2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+
+#include <linux/bug.h>
+#include <asm/cpuinfo.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <linux/param.h>
+#include <asm/pvr.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+        int count = 0;
+        char *fpga_family = "Unknown";
+        char *cpu_ver = "Unknown";
+        int i;
+
+        /* Denormalised to get the fpga family string */
+        for (i = 0; family_string_lookup[i].s != NULL; i++) {
+                if (cpuinfo.fpga_family_code == family_string_lookup[i].k) {
+                        fpga_family = (char *)family_string_lookup[i].s;
+                        break;
+                }
+        }
+
+        /* Denormalised to get the hw version string */
+        for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+                if (cpuinfo.ver_code == cpu_ver_lookup[i].k) {
+                        cpu_ver = (char *)cpu_ver_lookup[i].s;
+                        break;
+                }
+        }
+
+        count = seq_printf(m,
+                        "CPU-Family:    MicroBlaze\n"
+                        "FPGA-Arch:     %s\n"
+                        "CPU-Ver:       %s\n"
+                        "CPU-MHz:       %d.%02d\n"
+                        "BogoMips:      %lu.%02lu\n",
+                        fpga_family,
+                        cpu_ver,
+                        cpuinfo.cpu_clock_freq /
+                        1000000,
+                        cpuinfo.cpu_clock_freq %
+                        1000000,
+                        loops_per_jiffy / (500000 / HZ),
+                        (loops_per_jiffy / (5000 / HZ)) % 100);
+
+        count += seq_printf(m,
+                "HW:\n Shift:\t\t%s\n"
+                " MSR:\t\t%s\n"
+                " PCMP:\t\t%s\n"
+                " DIV:\t\t%s\n",
+                (cpuinfo.use_instr & PVR0_USE_BARREL_MASK) ? "yes" : "no",
+                (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) ? "yes" : "no",
+                (cpuinfo.use_instr & PVR2_USE_PCMP_INSTR) ? "yes" : "no",
+                (cpuinfo.use_instr & PVR0_USE_DIV_MASK) ? "yes" : "no");
+
+        count += seq_printf(m,
+                        " MMU:\t\t%x\n",
+                        cpuinfo.mmu);
+
+        count += seq_printf(m,
+                " MUL:\t\t%s\n"
+                " FPU:\t\t%s\n",
+                (cpuinfo.use_mult & PVR2_USE_MUL64_MASK) ? "v2" :
+                        (cpuinfo.use_mult & PVR0_USE_HW_MUL_MASK) ? "v1" : "no",
+                (cpuinfo.use_fpu & PVR2_USE_FPU2_MASK) ? "v2" :
+                        (cpuinfo.use_fpu & PVR0_USE_FPU_MASK) ? "v1" : "no");
+
+        count += seq_printf(m,
+                " Exc:\t\t%s%s%s%s%s%s%s%s\n",
+                (cpuinfo.use_exc & PVR2_OPCODE_0x0_ILL_MASK) ? "op0x0 " : "",
+                (cpuinfo.use_exc & PVR2_UNALIGNED_EXC_MASK) ? "unal " : "",
+                (cpuinfo.use_exc & PVR2_ILL_OPCODE_EXC_MASK) ? "ill " : "",
+                (cpuinfo.use_exc & PVR2_IOPB_BUS_EXC_MASK) ? "iopb " : "",
+                (cpuinfo.use_exc & PVR2_DOPB_BUS_EXC_MASK) ? "dopb " : "",
+                (cpuinfo.use_exc & PVR2_DIV_ZERO_EXC_MASK) ? "zero " : "",
+                (cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "",
+                (cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : "");
+
+        if (cpuinfo.use_icache)
+                count += seq_printf(m,
+                                "Icache:\t\t%ukB\n",
+                                cpuinfo.icache_size >> 10);
+        else
+                count += seq_printf(m, "Icache:\t\tno\n");
+
+        if (cpuinfo.use_dcache)
+                count += seq_printf(m,
+                                "Dcache:\t\t%ukB\n",
+                                cpuinfo.dcache_size >> 10);
+        else
+                count += seq_printf(m, "Dcache:\t\tno\n");
+
+        count += seq_printf(m,
+                        "HW-Debug:\t%s\n",
+                        cpuinfo.hw_debug ? "yes" : "no");
+
+        count += seq_printf(m,
+                        "PVR-USR1:\t%x\n"
+                        "PVR-USR2:\t%x\n",
+                        cpuinfo.pvr_user1,
+                        cpuinfo.pvr_user2);
+
+        return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+        int i = *pos;
+
+        return i < NR_CPUS ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+        ++*pos;
+        return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+        .start = c_start,
+        .next = c_next,
+        .stop = c_stop,
+        .show = show_cpuinfo,
+};
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
new file mode 100644
index 000000000000..c9a4340ddd53
--- /dev/null
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -0,0 +1,81 @@
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <asm/system.h>
+#include <asm/exceptions.h>
+#include <asm/pvr.h>
+
+/*
+ * Until we get an assembler that knows about the pvr registers,
+ * this horrible cruft will have to do.
+ * That hardcoded opcode is mfs r3, rpvrNN
+ */
+
+#define get_single_pvr(pvrid, val)                              \
+{                                                               \
+        register unsigned tmp __asm__("r3");                    \
+        tmp = 0x0;      /* Prevent warning about unused */      \
+        __asm__ __volatile__ (                                  \
+                        ".byte 0x94,0x60,0xa0, " #pvrid "\n\t"  \
+                        : "=r" (tmp) : : "memory");             \
+        val = tmp;                                              \
+}
+
+/*
+ * Does the CPU support the PVR register?
+ * return value:
+ * 0: no PVR
+ * 1: simple PVR
+ * 2: full PVR
+ *
+ * This must work on all CPU versions, including those before the
+ * PVR was even an option.
+ */
+
+int cpu_has_pvr(void)
+{
+        unsigned flags;
+        unsigned pvr0;
+
+        local_save_flags(flags);
+
+        /* PVR bit in MSR tells us if there is any support */
+        if (!(flags & PVR_MSR_BIT))
+                return 0;
+
+        get_single_pvr(0x00, pvr0);
+        pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
+
+        if (pvr0 & PVR0_PVR_FULL_MASK)
+                return 1;
+
+        /* for partial PVR use static cpuinfo */
+        return 2;
+}
+
+void get_pvr(struct pvr_s *p)
+{
+        get_single_pvr(0, p->pvr[0]);
+        get_single_pvr(1, p->pvr[1]);
+        get_single_pvr(2, p->pvr[2]);
+        get_single_pvr(3, p->pvr[3]);
+        get_single_pvr(4, p->pvr[4]);
+        get_single_pvr(5, p->pvr[5]);
+        get_single_pvr(6, p->pvr[6]);
+        get_single_pvr(7, p->pvr[7]);
+        get_single_pvr(8, p->pvr[8]);
+        get_single_pvr(9, p->pvr[9]);
+        get_single_pvr(10, p->pvr[10]);
+        get_single_pvr(11, p->pvr[11]);
+}
diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
new file mode 100644
index 000000000000..62cc78993f44
--- /dev/null
+++ b/arch/microblaze/kernel/early_printk.c
@@ -0,0 +1,107 @@
+/*
+ * Early printk support for Microblaze.
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2003-2006 Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <linux/fcntl.h>
+#include <asm/setup.h>
+#include <asm/prom.h>
+
+static u32 early_console_initialized;
+static u32 base_addr;
+
+static void early_printk_putc(char c)
+{
+        /*
+         * Limit how many times we'll spin waiting for TX FIFO status.
+         * This will prevent lockups if the base address is incorrectly
+         * set, or any other issue on the UARTLITE.
+         * This limit is pretty arbitrary, unless we are at about 10 baud
+         * we'll never timeout on a working UART.
+         */
+
+        unsigned retries = 10000;
+        /* read status bit - 0x8 offset */
+        while (retries-- && (in_be32(base_addr + 8) & (1 << 3)))
+                ;
+
+        /* Only attempt the iowrite if we didn't timeout */
+        /* write to TX_FIFO - 0x4 offset */
+        if (retries)
+                out_be32(base_addr + 4, c & 0xff);
+}
+
+static void early_printk_write(struct console *unused,
+                                        const char *s, unsigned n)
+{
+        while (*s && n-- > 0) {
+                early_printk_putc(*s);
+                if (*s == '\n')
+                        early_printk_putc('\r');
+                s++;
+        }
+}
+
+static struct console early_serial_console = {
+        .name = "earlyser",
+        .write = early_printk_write,
+        .flags = CON_PRINTBUFFER,
+        .index = -1,
+};
+
+static struct console *early_console = &early_serial_console;
+
+void early_printk(const char *fmt, ...)
+{
+        char buf[512];
+        int n;
+        va_list ap;
+
+        if (early_console_initialized) {
+                va_start(ap, fmt);
+                n = vscnprintf(buf, 512, fmt, ap);
+                early_console->write(early_console, buf, n);
+                va_end(ap);
+        }
+}
+
+int __init setup_early_printk(char *opt)
+{
+        if (early_console_initialized)
+                return 1;
+
+        base_addr = early_uartlite_console();
+        if (base_addr) {
+                early_console_initialized = 1;
+                early_printk("early_printk_console is enabled at 0x%08x\n",
+                                                        base_addr);
+
+                /* register_console(early_console); */
+
+                return 0;
+        } else
+                return 1;
+}
+
+void __init disable_early_printk(void)
+{
+        if (!early_console_initialized || !early_console)
+                return;
+        printk(KERN_WARNING "disabling early console\n");
+        unregister_console(early_console);
+        early_console_initialized = 0;
+}
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
new file mode 100644
index 000000000000..f24b1268baaf
--- /dev/null
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/entry.h>
+#include <asm/asm-offsets.h>
+#include <asm/registers.h>
+#include <asm/unistd.h>
+#include <asm/percpu.h>
+#include <asm/signal.h>
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+        .macro  disable_irq
+        msrclr r0, MSR_IE
+        .endm
+
+        .macro  enable_irq
+        msrset r0, MSR_IE
+        .endm
+
+        .macro  clear_bip
+        msrclr r0, MSR_BIP
+        .endm
+#else
+        .macro  disable_irq
+        mfs r11, rmsr
+        andi r11, r11, ~MSR_IE
+        mts rmsr, r11
+        .endm
+
+        .macro  enable_irq
+        mfs r11, rmsr
+        ori r11, r11, MSR_IE
+        mts rmsr, r11
+        .endm
+
+        .macro  clear_bip
+        mfs r11, rmsr
+        andi r11, r11, ~MSR_BIP
+        mts rmsr, r11
+        .endm
+#endif
+
+ENTRY(_interrupt)
+        swi     r1, r0, PER_CPU(ENTRY_SP)       /* save the current sp */
+        swi     r11, r0, PER_CPU(R11_SAVE)      /* temporarily save r11 */
+        lwi     r11, r0, PER_CPU(KM)            /* load mode indicator */
+        beqid   r11, 1f
+        nop
+        brid    2f                              /* jump over */
+        addik   r1, r1, (-PT_SIZE)      /* room for pt_regs (delay slot) */
+1:                                              /* switch to kernel stack */
+        lwi     r1, r0, PER_CPU(CURRENT_SAVE)   /* get the saved current */
+        lwi     r1, r1, TS_THREAD_INFO          /* get the thread info */
+        /* calculate kernel stack pointer */
+        addik   r1, r1, THREAD_SIZE - PT_SIZE
+2:
+        swi     r11, r1, PT_MODE                /* store the mode */
+        lwi     r11, r0, PER_CPU(R11_SAVE)      /* reload r11 */
+        swi     r2, r1, PT_R2
+        swi     r3, r1, PT_R3
+        swi     r4, r1, PT_R4
+        swi     r5, r1, PT_R5
+        swi     r6, r1, PT_R6
+        swi     r7, r1, PT_R7
+        swi     r8, r1, PT_R8
+        swi     r9, r1, PT_R9
+        swi     r10, r1, PT_R10
+        swi     r11, r1, PT_R11
+        swi     r12, r1, PT_R12
+        swi     r13, r1, PT_R13
+        swi     r14, r1, PT_R14
+        swi     r14, r1, PT_PC
+        swi     r15, r1, PT_R15
+        swi     r16, r1, PT_R16
+        swi     r17, r1, PT_R17
+        swi     r18, r1, PT_R18
+        swi     r19, r1, PT_R19
+        swi     r20, r1, PT_R20
+        swi     r21, r1, PT_R21
+        swi     r22, r1, PT_R22
+        swi     r23, r1, PT_R23
+        swi     r24, r1, PT_R24
+        swi     r25, r1, PT_R25
+        swi     r26, r1, PT_R26
+        swi     r27, r1, PT_R27
+        swi     r28, r1, PT_R28
+        swi     r29, r1, PT_R29
+        swi     r30, r1, PT_R30
+        swi     r31, r1, PT_R31
+        /* special purpose registers */
+        mfs     r11, rmsr
+        swi     r11, r1, PT_MSR
+        mfs     r11, rear
+        swi     r11, r1, PT_EAR
+        mfs     r11, resr
+        swi     r11, r1, PT_ESR
+        mfs     r11, rfsr
+        swi     r11, r1, PT_FSR
+        /* reload original stack pointer and save it */
+        lwi     r11, r0, PER_CPU(ENTRY_SP)
+        swi     r11, r1, PT_R1
+        /* update mode indicator we are in kernel mode */
+        addik   r11, r0, 1
+        swi     r11, r0, PER_CPU(KM)
+        /* restore r31 */
+        lwi     r31, r0, PER_CPU(CURRENT_SAVE)
+        /* prepare the link register, the argument and jump */
+        la      r15, r0, ret_from_intr - 8
+        addk    r6, r0, r15
+        braid   do_IRQ
+        add     r5, r0, r1
+
+ret_from_intr:
+        lwi     r11, r1, PT_MODE
+        bneid   r11, 3f
+
+        lwi     r6, r31, TS_THREAD_INFO /* get thread info */
+        lwi     r19, r6, TI_FLAGS       /* get flags in thread info */
+                                /* do an extra work if any bits are set */
+
+        andi    r11, r19, _TIF_NEED_RESCHED
+        beqi    r11, 1f
+        bralid  r15, schedule
+        nop
+1:      andi    r11, r19, _TIF_SIGPENDING
+        beqid   r11, no_intr_reshed
+        addk    r5, r1, r0
+        addk    r7, r0, r0
+        bralid  r15, do_signal
+        addk    r6, r0, r0
+
+no_intr_reshed:
+        /* save mode indicator */
+        lwi     r11, r1, PT_MODE
+3:
+        swi     r11, r0, PER_CPU(KM)
+
+        /* save r31 */
+        swi     r31, r0, PER_CPU(CURRENT_SAVE)
+restore_context:
+        /* special purpose registers */
+        lwi     r11, r1, PT_FSR
+        mts     rfsr, r11
+        lwi     r11, r1, PT_ESR
+        mts     resr, r11
+        lwi     r11, r1, PT_EAR
+        mts     rear, r11
+        lwi     r11, r1, PT_MSR
+        mts     rmsr, r11
+
+        lwi     r31, r1, PT_R31
+        lwi     r30, r1, PT_R30
+        lwi     r29, r1, PT_R29
+        lwi     r28, r1, PT_R28
+        lwi     r27, r1, PT_R27
+        lwi     r26, r1, PT_R26
+        lwi     r25, r1, PT_R25
+        lwi     r24, r1, PT_R24
+        lwi     r23, r1, PT_R23
+        lwi     r22, r1, PT_R22
+        lwi     r21, r1, PT_R21
+        lwi     r20, r1, PT_R20
+        lwi     r19, r1, PT_R19
+        lwi     r18, r1, PT_R18
+        lwi     r17, r1, PT_R17
+        lwi     r16, r1, PT_R16
+        lwi     r15, r1, PT_R15
+        lwi     r14, r1, PT_PC
+        lwi     r13, r1, PT_R13
+        lwi     r12, r1, PT_R12
+        lwi     r11, r1, PT_R11
+        lwi     r10, r1, PT_R10
+        lwi     r9, r1, PT_R9
+        lwi     r8, r1, PT_R8
+        lwi     r7, r1, PT_R7
+        lwi     r6, r1, PT_R6
+        lwi     r5, r1, PT_R5
+        lwi     r4, r1, PT_R4
+        lwi     r3, r1, PT_R3
+        lwi     r2, r1, PT_R2
+        lwi     r1, r1, PT_R1
+        rtid    r14, 0
+        nop
+
+ENTRY(_reset)
+        brai    0;
+
+ENTRY(_user_exception)
+        swi     r1, r0, PER_CPU(ENTRY_SP)       /* save the current sp */
+        swi     r11, r0, PER_CPU(R11_SAVE)      /* temporarily save r11 */
+        lwi     r11, r0, PER_CPU(KM)            /* load mode indicator */
+        beqid   r11, 1f                         /* Already in kernel mode? */
+        nop
+        brid    2f                              /* jump over */
+        addik   r1, r1, (-PT_SIZE)      /* Room for pt_regs (delay slot) */
+1:                                              /* Switch to kernel stack */
+        lwi     r1, r0, PER_CPU(CURRENT_SAVE)   /* get the saved current */
+        lwi     r1, r1, TS_THREAD_INFO          /* get the thread info */
+        /* calculate kernel stack pointer */
+        addik   r1, r1, THREAD_SIZE - PT_SIZE
+        swi     r11, r0, PER_CPU(R11_SAVE)      /* temporarily save r11 */
+        lwi     r11, r0, PER_CPU(KM)            /* load mode indicator */
+2:
+        swi     r11, r1, PT_MODE                /* store the mode */
+        lwi     r11, r0, PER_CPU(R11_SAVE)      /* reload r11 */
+        /* save them on stack */
+        swi     r2, r1, PT_R2
+        swi     r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */
+        swi     r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */
+        swi     r5, r1, PT_R5
+        swi     r6, r1, PT_R6
+        swi     r7, r1, PT_R7
+        swi     r8, r1, PT_R8
+        swi     r9, r1, PT_R9
+        swi     r10, r1, PT_R10
+        swi     r11, r1, PT_R11
+        /* r12: _always_ in clobber list; see unistd.h */
+        swi     r12, r1, PT_R12
+        swi     r13, r1, PT_R13
+        /* r14: _always_ in clobber list; see unistd.h */
+        swi     r14, r1, PT_R14
+        /* but we want to return to the next inst. */
+        addik   r14, r14, 0x4
+        swi     r14, r1, PT_PC          /* increment by 4 and store in pc */
+        swi     r15, r1, PT_R15
+        swi     r16, r1, PT_R16
+        swi     r17, r1, PT_R17
+        swi     r18, r1, PT_R18
+        swi     r19, r1, PT_R19
+        swi     r20, r1, PT_R20
+        swi     r21, r1, PT_R21
+        swi     r22, r1, PT_R22
+        swi     r23, r1, PT_R23
+        swi     r24, r1, PT_R24
+        swi     r25, r1, PT_R25
+        swi     r26, r1, PT_R26
+        swi     r27, r1, PT_R27
+        swi     r28, r1, PT_R28
+        swi     r29, r1, PT_R29
+        swi     r30, r1, PT_R30
+        swi     r31, r1, PT_R31
+
+        disable_irq
+        nop             /* make sure IE bit is in effect */
+        clear_bip       /* once IE is in effect it is safe to clear BIP */
+        nop
+
+        /* special purpose registers */
+        mfs     r11, rmsr
+        swi     r11, r1, PT_MSR
+        mfs     r11, rear
+        swi     r11, r1, PT_EAR
+        mfs     r11, resr
+        swi     r11, r1, PT_ESR
+        mfs     r11, rfsr
+        swi     r11, r1, PT_FSR
+        /* reload original stack pointer and save it */
+        lwi     r11, r0, PER_CPU(ENTRY_SP)
+        swi     r11, r1, PT_R1
+        /* update mode indicator we are in kernel mode */
+        addik   r11, r0, 1
+        swi     r11, r0, PER_CPU(KM)
+        /* restore r31 */
+        lwi     r31, r0, PER_CPU(CURRENT_SAVE)
+        /* re-enable interrupts now we are in kernel mode */
+        enable_irq
+
+        /* See if the system call number is valid. */
+        addi    r11, r12, -__NR_syscalls
+        bgei    r11, 1f                 /* return to user if not valid */
+        /* Figure out which function to use for this system call. */
+        /* Note Microblaze barrel shift is optional, so don't rely on it */
+        add     r12, r12, r12                   /* convert num -> ptr */
+        add     r12, r12, r12
+        lwi     r12, r12, sys_call_table        /* Get function pointer */
+        la      r15, r0, ret_to_user-8          /* set return address */
+        bra     r12                             /* Make the system call. */
+        bri     0                               /* won't reach here */
+1:
+        brid    ret_to_user                     /* jump to syscall epilogue */
+        addi    r3, r0, -ENOSYS                 /* set errno in delay slot */
+
+/*
+ * Debug traps are like a system call, but entered via brki r14, 0x60
+ * All we need to do is send the SIGTRAP signal to current, ptrace and do_signal
+ * will handle the rest
+ */
+ENTRY(_debug_exception)
+        swi     r1, r0, PER_CPU(ENTRY_SP)       /* save the current sp */
+        lwi     r1, r0, PER_CPU(CURRENT_SAVE)   /* get the saved current */
+        lwi     r1, r1, TS_THREAD_INFO          /* get the thread info */
+        addik   r1, r1, THREAD_SIZE - PT_SIZE   /* get the kernel stack */
+        swi     r11, r0, PER_CPU(R11_SAVE)      /* temporarily save r11 */
+        lwi     r11, r0, PER_CPU(KM)            /* load mode indicator */
+//save_context:
+        swi     r11, r1, PT_MODE        /* store the mode */
+        lwi     r11, r0, PER_CPU(R11_SAVE)      /* reload r11 */
+        /* save them on stack */
+        swi     r2, r1, PT_R2
+        swi     r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */
+        swi     r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */
+        swi     r5, r1, PT_R5
+        swi     r6, r1, PT_R6
+        swi     r7, r1, PT_R7
+        swi     r8, r1, PT_R8
+        swi     r9, r1, PT_R9
+        swi     r10, r1, PT_R10
+        swi     r11, r1, PT_R11
+        /* r12: _always_ in clobber list; see unistd.h */
+        swi     r12, r1, PT_R12
+        swi     r13, r1, PT_R13
+        /* r14: _always_ in clobber list; see unistd.h */
+        swi     r14, r1, PT_R14
+        swi     r14, r1, PT_PC /* Will return to interrupted instruction */
+        swi     r15, r1, PT_R15
+        swi     r16, r1, PT_R16
+        swi     r17, r1, PT_R17
+        swi     r18, r1, PT_R18
+        swi     r19, r1, PT_R19
+        swi     r20, r1, PT_R20
+        swi     r21, r1, PT_R21
+        swi     r22, r1, PT_R22
+        swi     r23, r1, PT_R23
+        swi     r24, r1, PT_R24
+        swi     r25, r1, PT_R25
+        swi     r26, r1, PT_R26
+        swi     r27, r1, PT_R27
+        swi     r28, r1, PT_R28
+        swi     r29, r1, PT_R29
+        swi     r30, r1, PT_R30
+        swi     r31, r1, PT_R31
+
+        disable_irq
+        nop             /* make sure IE bit is in effect */
+        clear_bip       /* once IE is in effect it is safe to clear BIP */
+        nop
+
+        /* special purpose registers */
+        mfs     r11, rmsr
+        swi     r11, r1, PT_MSR
+        mfs     r11, rear
+        swi     r11, r1, PT_EAR
+        mfs     r11, resr
+        swi     r11, r1, PT_ESR
+        mfs     r11, rfsr
+        swi     r11, r1, PT_FSR
+        /* reload original stack pointer and save it */
+        lwi     r11, r0, PER_CPU(ENTRY_SP)
+        swi     r11, r1, PT_R1
+        /* update mode indicator we are in kernel mode */
+        addik   r11, r0, 1
+        swi     r11, r0, PER_CPU(KM)
+        /* restore r31 */
+        lwi     r31, r0, PER_CPU(CURRENT_SAVE)
+        /* re-enable interrupts now we are in kernel mode */
+        enable_irq
+
+        addi    r5, r0, SIGTRAP                 /* sending the trap signal */
+        add     r6, r0, r31                     /* to current */
+        bralid  r15, send_sig
+        add     r7, r0, r0                      /* 3rd param zero */
+
+        /* Restore r3/r4 to work around how ret_to_user works */
+        lwi     r3, r1, PT_R3
+        lwi     r4, r1, PT_R4
+        bri     ret_to_user
+
+ENTRY(_break)
+        bri     0
+
+/* struct task_struct *_switch_to(struct thread_info *prev,
+                                        struct thread_info *next); */
+ENTRY(_switch_to)
+        /* prepare return value */
+        addk    r3, r0, r31
+
+        /* save registers in cpu_context */
+        /* use r11 and r12, volatile registers, as temp register */
+        addik   r11, r5, TI_CPU_CONTEXT
+        swi     r1, r11, CC_R1
+        swi     r2, r11, CC_R2
+        /* skip volatile registers.
+         * they are saved on stack when we jumped to _switch_to() */
+        /* dedicated registers */
+        swi     r13, r11, CC_R13
+        swi     r14, r11, CC_R14
+        swi     r15, r11, CC_R15
+        swi     r16, r11, CC_R16
+        swi     r17, r11, CC_R17
+        swi     r18, r11, CC_R18
+        /* save non-volatile registers */
+        swi     r19, r11, CC_R19
+        swi     r20, r11, CC_R20
+        swi     r21, r11, CC_R21
+        swi     r22, r11, CC_R22
+        swi     r23, r11, CC_R23
+        swi     r24, r11, CC_R24
+        swi     r25, r11, CC_R25
+        swi     r26, r11, CC_R26
+        swi     r27, r11, CC_R27
+        swi     r28, r11, CC_R28
+        swi     r29, r11, CC_R29
+        swi     r30, r11, CC_R30
+        /* special purpose registers */
+        mfs     r12, rmsr
+        swi     r12, r11, CC_MSR
+        mfs     r12, rear
+        swi     r12, r11, CC_EAR
+        mfs     r12, resr
+        swi     r12, r11, CC_ESR
+        mfs     r12, rfsr
+        swi     r12, r11, CC_FSR
+
+        /* update r31, the current */
+        lwi     r31, r6, TI_TASK
+        swi     r31, r0, PER_CPU(CURRENT_SAVE)
+
+        /* get new process' cpu context and restore */
+        addik   r11, r6, TI_CPU_CONTEXT
+
+        /* special purpose registers */
+        lwi     r12, r11, CC_FSR
+        mts     rfsr, r12
+        lwi     r12, r11, CC_ESR
+        mts     resr, r12
+        lwi     r12, r11, CC_EAR
+        mts     rear, r12
+        lwi     r12, r11, CC_MSR
+        mts     rmsr, r12
+        /* non-volatile registers */
+        lwi     r30, r11, CC_R30
+        lwi     r29, r11, CC_R29
+        lwi     r28, r11, CC_R28
+        lwi     r27, r11, CC_R27
+        lwi     r26, r11, CC_R26
+        lwi     r25, r11, CC_R25
+        lwi     r24, r11, CC_R24
+        lwi     r23, r11, CC_R23
+        lwi     r22, r11, CC_R22
+        lwi     r21, r11, CC_R21
+        lwi     r20, r11, CC_R20
+        lwi     r19, r11, CC_R19
+        /* dedicated registers */
+        lwi     r18, r11, CC_R18
+        lwi     r17, r11, CC_R17
+        lwi     r16, r11, CC_R16
+        lwi     r15, r11, CC_R15
+        lwi     r14, r11, CC_R14
+        lwi     r13, r11, CC_R13
+        /* skip volatile registers */
+        lwi     r2, r11, CC_R2
+        lwi     r1, r11, CC_R1
+
+        rtsd    r15, 8
+        nop
+
+ENTRY(ret_from_fork)
+        addk    r5, r0, r3
+        addk    r6, r0, r1
+        brlid   r15, schedule_tail
+        nop
+        swi     r31, r1, PT_R31         /* save r31 in user context. */
+                        /* will soon be restored to r31 in ret_to_user */
+        addk    r3, r0, r0
+        brid    ret_to_user
+        nop
+
+work_pending:
+        andi    r11, r19, _TIF_NEED_RESCHED
+        beqi    r11, 1f
+        bralid  r15, schedule
+        nop
+1:      andi    r11, r19, _TIF_SIGPENDING
+        beqi    r11, no_work_pending
+        addk    r5, r1, r0
+        addik   r7, r0, 1
+        bralid  r15, do_signal
+        addk    r6, r0, r0
+        bri     no_work_pending
+
+ENTRY(ret_to_user)
+        disable_irq
+
+        swi     r4, r1, PT_R4           /* return val */
+        swi     r3, r1, PT_R3           /* return val */
+
+        lwi     r6, r31, TS_THREAD_INFO /* get thread info */
+        lwi     r19, r6, TI_FLAGS /* get flags in thread info */
+        bnei    r19, work_pending /* do an extra work if any bits are set */
+no_work_pending:
+        disable_irq
+
+        /* save r31 */
+        swi     r31, r0, PER_CPU(CURRENT_SAVE)
+        /* save mode indicator */
+        lwi     r18, r1, PT_MODE
+        swi     r18, r0, PER_CPU(KM)
+//restore_context:
+        /* special purpose registers */
+        lwi     r18, r1, PT_FSR
+        mts     rfsr, r18
+        lwi     r18, r1, PT_ESR
+        mts     resr, r18
+        lwi     r18, r1, PT_EAR
+        mts     rear, r18
+        lwi     r18, r1, PT_MSR
+        mts     rmsr, r18
+
+        lwi     r31, r1, PT_R31
+        lwi     r30, r1, PT_R30
+        lwi     r29, r1, PT_R29
+        lwi     r28, r1, PT_R28
+        lwi     r27, r1, PT_R27
+        lwi     r26, r1, PT_R26
+        lwi     r25, r1, PT_R25
+        lwi     r24, r1, PT_R24
+        lwi     r23, r1, PT_R23
+        lwi     r22, r1, PT_R22
+        lwi     r21, r1, PT_R21
+        lwi     r20, r1, PT_R20
+        lwi     r19, r1, PT_R19
+        lwi     r18, r1, PT_R18
+        lwi     r17, r1, PT_R17
+        lwi     r16, r1, PT_R16
+        lwi     r15, r1, PT_R15
+        lwi     r14, r1, PT_PC
+        lwi     r13, r1, PT_R13
+        lwi     r12, r1, PT_R12
+        lwi     r11, r1, PT_R11
+        lwi     r10, r1, PT_R10
+        lwi     r9, r1, PT_R9
+        lwi     r8, r1, PT_R8
+        lwi     r7, r1, PT_R7
+        lwi     r6, r1, PT_R6
+        lwi     r5, r1, PT_R5
+        lwi     r4, r1, PT_R4           /* return val */
+        lwi     r3, r1, PT_R3           /* return val */
+        lwi     r2, r1, PT_R2
+        lwi     r1, r1, PT_R1
+
+        rtid    r14, 0
+        nop
+
+sys_vfork_wrapper:
+        brid    sys_vfork
+        addk    r5, r1, r0
+
+sys_clone_wrapper:
+        brid    sys_clone
+        addk    r7, r1, r0
+
+sys_execve_wrapper:
+        brid    sys_execve
+        addk    r8, r1, r0
+
+sys_sigreturn_wrapper:
+        brid    sys_sigreturn
+        addk    r5, r1, r0
+
+sys_rt_sigreturn_wrapper:
+        brid    sys_rt_sigreturn
+        addk    r5, r1, r0
+
+sys_sigsuspend_wrapper:
+        brid    sys_rt_sigsuspend
+        addk    r6, r1, r0
+
+sys_rt_sigsuspend_wrapper:
+        brid    sys_rt_sigsuspend
+        addk    r7, r1, r0
+
+        /* Interrupt vector table */
+        .section        .init.ivt, "ax"
+        .org 0x0
+        brai    _reset
+        brai    _user_exception
+        brai    _interrupt
+        brai    _break
+        brai    _hw_exception_handler
+        .org 0x60
+        brai    _debug_exception
+
+.section .rodata,"a"
+#include "syscall_table.S"
+
+syscall_table_size=(.-sys_call_table)
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
new file mode 100644
index 000000000000..4a8a4064c7ee
--- /dev/null
+++ b/arch/microblaze/kernel/exceptions.c
@@ -0,0 +1,124 @@
+/*
+ * HW exception handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kallsyms.h>
+#include <linux/module.h>
+
+#include <asm/exceptions.h>
+#include <asm/entry.h>          /* For KM CPU var */
+#include <asm/uaccess.h>
+#include <asm/errno.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02
+#define MICROBLAZE_IBUS_EXCEPTION       0x03
+#define MICROBLAZE_DBUS_EXCEPTION       0x04
+#define MICROBLAZE_DIV_ZERO_EXCEPTION   0x05
+#define MICROBLAZE_FPU_EXCEPTION        0x06
+#define MICROBLAZE_PRIVILEG_EXCEPTION   0x07
+
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *fp, long err)
+{
+        console_verbose();
+        spin_lock_irq(&die_lock);
+        printk(KERN_WARNING "Oops: %s, sig: %ld\n", str, err);
+        show_regs(fp);
+        spin_unlock_irq(&die_lock);
+        /* do_exit() should take care of panic'ing from an interrupt
+         * context so we don't handle it here
+         */
+        do_exit(err);
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+        siginfo_t info;
+
+        if (kernel_mode(regs)) {
+                debugger(regs);
+                die("Exception in kernel mode", regs, signr);
+        }
+        info.si_signo = signr;
+        info.si_errno = 0;
+        info.si_code = code;
+        info.si_addr = (void __user *) addr;
+        force_sig_info(signr, &info, current);
+}
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+                                                        int fsr, int addr)
+{
+#if 0
+        printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+                        type, user_mode(regs) ? "user" : "kernel", fsr,
+                        (unsigned int) regs->pc, (unsigned int) regs->esr);
+#endif
+
+        switch (type & 0x1F) {
+        case MICROBLAZE_ILL_OPCODE_EXCEPTION:
+                _exception(SIGILL, regs, ILL_ILLOPC, addr);
+                break;
+        case MICROBLAZE_IBUS_EXCEPTION:
+                if (user_mode(regs)) {
+                        printk(KERN_WARNING "Instruction bus error exception in user mode.\n");
+                        _exception(SIGBUS, regs, BUS_ADRERR, addr);
+                        return;
+                }
+                printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n");
+                die("bus exception", regs, SIGBUS);
+                break;
+        case MICROBLAZE_DBUS_EXCEPTION:
+                if (user_mode(regs)) {
+                        printk(KERN_WARNING "Data bus error exception in user mode.\n");
+                        _exception(SIGBUS, regs, BUS_ADRERR, addr);
+                        return;
+                }
+                printk(KERN_WARNING "Data bus error exception in kernel mode.\n");
+                die("bus exception", regs, SIGBUS);
+                break;
+        case MICROBLAZE_DIV_ZERO_EXCEPTION:
+                printk(KERN_WARNING "Divide by zero exception\n");
+                _exception(SIGILL, regs, ILL_ILLOPC, addr);
+                break;
+
+        case MICROBLAZE_FPU_EXCEPTION:
+                /* IEEE FP exception */
+                /* I removed fsr variable and use code var for storing fsr */
+                if (fsr & FSR_IO)
+                        fsr = FPE_FLTINV;
+                else if (fsr & FSR_OF)
+                        fsr = FPE_FLTOVF;
+                else if (fsr & FSR_UF)
+                        fsr = FPE_FLTUND;
+                else if (fsr & FSR_DZ)
+                        fsr = FPE_FLTDIV;
+                else if (fsr & FSR_DO)
+                        fsr = FPE_FLTRES;
+                _exception(SIGFPE, regs, fsr, addr);
+                break;
+
+        default:
+                printk(KERN_WARNING "Unexpected exception %02x "
+                        "PC=%08x in %s mode\n", type, (unsigned int) addr,
+                        kernel_mode(regs) ? "kernel" : "user");
+        }
+        return;
+}
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
new file mode 100644
index 000000000000..319dc35fc922
--- /dev/null
+++ b/arch/microblaze/kernel/head.S
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+        .text
+ENTRY(_start)
+        mfs     r1, rmsr
+        andi    r1, r1, ~2
+        mts     rmsr, r1
+
+/* save fdt to kernel location */
+/* r7 stores pointer to fdt blob */
+        beqi    r7, no_fdt_arg
+        or      r11, r0, r0 /* incremment */
+        ori     r4, r0, TOPHYS(_fdt_start) /* save bram context */
+        ori     r3, r0, (0x4000 - 4)
+_copy_fdt:
+        lw      r12, r7, r11 /* r12 = r7 + r11 */
+        sw      r12, r4, r11 /* addr[r4 + r11] = r12 */
+        addik   r11, r11, 4 /* increment counting */
+        bgtid   r3, _copy_fdt /* loop for all entries */
+        addik   r3, r3, -4 /* descrement loop */
+no_fdt_arg:
+
+        /* Initialize small data anchors */
+        la      r13, r0, _KERNEL_SDA_BASE_
+        la      r2, r0, _KERNEL_SDA2_BASE_
+
+        /* Initialize stack pointer */
+        la      r1, r0, init_thread_union + THREAD_SIZE - 4
+
+        /* Initialize r31 with current task address */
+        la      r31, r0, init_task
+
+        /*
+         * Call platform dependent initialize function.
+         * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
+         * the function.
+         */
+        la      r8, r0, machine_early_init
+        brald   r15, r8
+        nop
+
+        la      r15, r0, machine_halt
+        braid   start_kernel
+        nop
diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c
new file mode 100644
index 000000000000..1bdf20222b92
--- /dev/null
+++ b/arch/microblaze/kernel/heartbeat.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static unsigned int base_addr;
+
+void heartbeat(void)
+{
+        static unsigned int cnt, period, dist;
+
+        if (base_addr) {
+                if (cnt == 0 || cnt == dist)
+                        out_be32(base_addr, 1);
+                else if (cnt == 7 || cnt == dist + 7)
+                        out_be32(base_addr, 0);
+
+                if (++cnt > period) {
+                        cnt = 0;
+                        /*
+                         * The hyperbolic function below modifies the heartbeat
+                         * period length in dependency of the current (5min)
+                         * load. It goes through the points f(0)=126, f(1)=86,
+                         * f(5)=51, f(inf)->30.
+                         */
+                        period = ((672 << FSHIFT) / (5 * avenrun[0] +
+                                                (7 << FSHIFT))) + 30;
+                        dist = period / 4;
+                }
+        }
+}
+
+void setup_heartbeat(void)
+{
+        struct device_node *gpio = NULL;
+        int j;
+        char *gpio_list[] = {
+                                "xlnx,xps-gpio-1.00.a",
+                                "xlnx,opb-gpio-1.00.a",
+                                NULL
+                        };
+
+        for (j = 0; gpio_list[j] != NULL; j++) {
+                gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]);
+                if (gpio)
+                        break;
+        }
+
+        base_addr = *(int *) of_get_property(gpio, "reg", NULL);
+        base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
+        printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr);
+
+        if (*(int *) of_get_property(gpio, "xlnx,is-bidir", NULL))
+                out_be32(base_addr + 4, 0); /* GPIO is configured as output */
+}
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
new file mode 100644
index 000000000000..cf9486d99838
--- /dev/null
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -0,0 +1,458 @@
+/*
+ * Exception handling for Microblaze
+ *
+ * Rewriten interrupt handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ *
+ * uClinux customisation (C) 2005 John Williams
+ *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ *      Copyright (C) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *              Initial PowerPC version.
+ *      Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *              Rewritten for PReP
+ *      Copyright (C) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *              Low-level exception handers, MMU support, and rewrite.
+ *      Copyright (C) 1997 Dan Malek <dmalek@jlc.net>
+ *              PowerPC 8xx modifications.
+ *      Copyright (C) 1998-1999 TiVo, Inc.
+ *              PowerPC 403GCX modifications.
+ *      Copyright (C) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *              PowerPC 403GCX/405GP modifications.
+ *      Copyright 2000 MontaVista Software Inc.
+ *              PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ *              Author: MontaVista Software, Inc.
+ *              frank_rowand@mvista.com or source@mvista.com
+ *              debbie_chu@mvista.com
+ *
+ * Original code
+ * Copyright (C) 2004 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/*
+ * Here are the handlers which don't require enabling translation
+ * and calling other kernel code thus we can keep their design very simple
+ * and do all processing in real mode. All what they need is a valid current
+ * (that is an issue for the CONFIG_REGISTER_TASK_PTR case)
+ * This handlers use r3,r4,r5,r6 and optionally r[current] to work therefore
+ * these registers are saved/restored
+ * The handlers which require translation are in entry.S --KAA
+ *
+ * Microblaze HW Exception Handler
+ * - Non self-modifying exception handler for the following exception conditions
+ *   - Unalignment
+ *   - Instruction bus error
+ *   - Data bus error
+ *   - Illegal instruction opcode
+ *   - Divide-by-zero
+ *
+ * Note we disable interrupts during exception handling, otherwise we will
+ * possibly get multiple re-entrancy if interrupt handles themselves cause
+ * exceptions. JW
+ */
+
+#include <asm/exceptions.h>
+#include <asm/unistd.h>
+#include <asm/page.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <linux/linkage.h>
+
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/asm-offsets.h>
+
+/* Helpful Macros */
+#define EX_HANDLER_STACK_SIZ    (4*19)
+#define NUM_TO_REG(num)         r ## num
+
+#define LWREG_NOP                       \
+        bri     ex_handler_unhandled;   \
+        nop;
+
+#define SWREG_NOP                       \
+        bri     ex_handler_unhandled;   \
+        nop;
+
+/* FIXME this is weird - for noMMU kernel is not possible to use brid
+ * instruction which can shorten executed time
+ */
+
+/* r3 is the source */
+#define R3_TO_LWREG_V(regnum)                           \
+        swi     r3, r1, 4 * regnum;                             \
+        bri     ex_handler_done;
+
+/* r3 is the source */
+#define R3_TO_LWREG(regnum)                             \
+        or      NUM_TO_REG (regnum), r0, r3;            \
+        bri     ex_handler_done;
+
+/* r3 is the target */
+#define SWREG_TO_R3_V(regnum)                           \
+        lwi     r3, r1, 4 * regnum;                             \
+        bri     ex_sw_tail;
+
+/* r3 is the target */
+#define SWREG_TO_R3(regnum)                             \
+        or      r3, r0, NUM_TO_REG (regnum);            \
+        bri     ex_sw_tail;
+
+.extern other_exception_handler /* Defined in exception.c */
+
+/*
+ * hw_exception_handler - Handler for exceptions
+ *
+ * Exception handler notes:
+ * - Handles all exceptions
+ * - Does not handle unaligned exceptions during load into r17, r1, r0.
+ * - Does not handle unaligned exceptions during store from r17 (cannot be
+ *   done) and r1 (slows down common case)
+ *
+ *  Relevant register structures
+ *
+ *  EAR - |----|----|----|----|----|----|----|----|
+ *      - <  ##   32 bit faulting address     ##  >
+ *
+ *  ESR - |----|----|----|----|----| - | - |-----|-----|
+ *      -                            W   S   REG   EXC
+ *
+ *
+ * STACK FRAME STRUCTURE (for NO_MMU)
+ * ---------------------------------
+ *
+ *      +-------------+         + 0
+ *      |     MSR     |
+ *      +-------------+         + 4
+ *      |     r1      |
+ *      |      .      |
+ *      |      .      |
+ *      |      .      |
+ *      |      .      |
+ *      |     r18     |
+ *      +-------------+         + 76
+ *      |      .      |
+ *      |      .      |
+ *
+ * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S
+ * which is used for storing register values - old style was, that value were
+ * stored in stack but in case of failure you lost information about register.
+ * Currently you can see register value in memory in specific place.
+ * In compare to with previous solution the speed should be the same.
+ *
+ * MMU exception handler has different handling compare to no MMU kernel.
+ * Exception handler use jump table for directing of what happen. For MMU kernel
+ * is this approach better because MMU relate exception are handled by asm code
+ * in this file. In compare to with MMU expect of unaligned exception
+ * is everything handled by C code.
+ */
+
+/*
+ * every of these handlers is entered having R3/4/5/6/11/current saved on stack
+ * and clobbered so care should be taken to restore them if someone is going to
+ * return from exception
+ */
+
+/* wrappers to restore state before coming to entry.S */
+
+.global _hw_exception_handler
+.section .text
+.align 4
+.ent _hw_exception_handler
+_hw_exception_handler:
+        addik   r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
+        swi     r3, r1, PT_R3
+        swi     r4, r1, PT_R4
+        swi     r5, r1, PT_R5
+        swi     r6, r1, PT_R6
+
+        mfs     r5, rmsr;
+        nop
+        swi     r5, r1, 0;
+        mfs     r4, rbtr        /* Save BTR before jumping to handler */
+        nop
+        mfs     r3, resr
+        nop
+
+        andi    r5, r3, 0x1000;         /* Check ESR[DS] */
+        beqi    r5, not_in_delay_slot;  /* Branch if ESR[DS] not set */
+        mfs     r17, rbtr;      /* ESR[DS] set - return address in BTR */
+        nop
+not_in_delay_slot:
+        swi     r17, r1, PT_R17
+
+        andi    r5, r3, 0x1F;           /* Extract ESR[EXC] */
+
+        /* Exceptions enabled here. This will allow nested exceptions */
+        mfs     r6, rmsr;
+        nop
+        swi     r6, r1, 0; /* RMSR_OFFSET */
+        ori     r6, r6, 0x100; /* Turn ON the EE bit */
+        andi    r6, r6, ~2; /* Disable interrupts */
+        mts     rmsr, r6;
+        nop
+
+        xori    r6, r5, 1; /* 00001 = Unaligned Exception */
+        /* Jump to unalignment exception handler */
+        beqi    r6, handle_unaligned_ex;
+
+handle_other_ex: /* Handle Other exceptions here */
+        /* Save other volatiles before we make procedure calls below */
+        swi     r7, r1, PT_R7
+        swi     r8, r1, PT_R8
+        swi     r9, r1, PT_R9
+        swi     r10, r1, PT_R10
+        swi     r11, r1, PT_R11
+        swi     r12, r1, PT_R12
+        swi     r14, r1, PT_R14
+        swi     r15, r1, PT_R15
+        swi     r18, r1, PT_R18
+
+        or      r5, r1, r0
+        andi    r6, r3, 0x1F; /* Load ESR[EC] */
+        lwi     r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */
+        swi     r7, r1, PT_MODE
+        mfs     r7, rfsr
+        nop
+        addk    r8, r17, r0; /* Load exception address */
+        bralid  r15, full_exception; /* Branch to the handler */
+        nop;
+
+        /*
+         * Trigger execution of the signal handler by enabling
+         * interrupts and calling an invalid syscall.
+         */
+        mfs     r5, rmsr;
+        nop
+        ori     r5, r5, 2;
+        mts     rmsr, r5; /* enable interrupt */
+        nop
+        addi    r12, r0, __NR_syscalls;
+        brki    r14, 0x08;
+        mfs     r5, rmsr; /* disable interrupt */
+        nop
+        andi    r5, r5, ~2;
+        mts     rmsr, r5;
+        nop
+
+        lwi     r7, r1, PT_R7
+        lwi     r8, r1, PT_R8
+        lwi     r9, r1, PT_R9
+        lwi     r10, r1, PT_R10
+        lwi     r11, r1, PT_R11
+        lwi     r12, r1, PT_R12
+        lwi     r14, r1, PT_R14
+        lwi     r15, r1, PT_R15
+        lwi     r18, r1, PT_R18
+
+        bri     ex_handler_done; /* Complete exception handling */
+
+/* 0x01 - Unaligned data access exception
+ * This occurs when a word access is not aligned on a word boundary,
+ * or when a 16-bit access is not aligned on a 16-bit boundary.
+ * This handler perform the access, and returns, except for MMU when
+ * the unaligned address is last on a 4k page or the physical address is
+ * not found in the page table, in which case unaligned_data_trap is called.
+ */
+handle_unaligned_ex:
+        /* Working registers already saved: R3, R4, R5, R6
+         *  R3 = ESR
+         *  R4 = BTR
+         */
+        mfs     r4, rear;
+        nop
+
+        andi    r6, r3, 0x3E0; /* Mask and extract the register operand */
+        srl     r6, r6; /* r6 >> 5 */
+        srl     r6, r6;
+        srl     r6, r6;
+        srl     r6, r6;
+        srl     r6, r6;
+        /* Store the register operand in a temporary location */
+        sbi     r6, r0, TOPHYS(ex_reg_op);
+
+        andi    r6, r3, 0x400; /* Extract ESR[S] */
+        bnei    r6, ex_sw;
+ex_lw:
+        andi    r6, r3, 0x800; /* Extract ESR[W] */
+        beqi    r6, ex_lhw;
+        lbui    r5, r4, 0; /* Exception address in r4 */
+        /* Load a word, byte-by-byte from destination address
+                and save it in tmp space */
+        sbi     r5, r0, TOPHYS(ex_tmp_data_loc_0);
+        lbui    r5, r4, 1;
+        sbi     r5, r0, TOPHYS(ex_tmp_data_loc_1);
+        lbui    r5, r4, 2;
+        sbi     r5, r0, TOPHYS(ex_tmp_data_loc_2);
+        lbui    r5, r4, 3;
+        sbi     r5, r0, TOPHYS(ex_tmp_data_loc_3);
+        /* Get the destination register value into r3 */
+        lwi     r3, r0, TOPHYS(ex_tmp_data_loc_0);
+        bri     ex_lw_tail;
+ex_lhw:
+        lbui    r5, r4, 0; /* Exception address in r4 */
+        /* Load a half-word, byte-by-byte from destination
+                address and save it in tmp space */
+        sbi     r5, r0, TOPHYS(ex_tmp_data_loc_0);
+        lbui    r5, r4, 1;
+        sbi     r5, r0, TOPHYS(ex_tmp_data_loc_1);
+        /* Get the destination register value into r3 */
+        lhui    r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ex_lw_tail:
+        /* Get the destination register number into r5 */
+        lbui    r5, r0, TOPHYS(ex_reg_op);
+        /* Form load_word jump table offset (lw_table + (8 * regnum)) */
+        la      r6, r0, TOPHYS(lw_table);
+        addk    r5, r5, r5;
+        addk    r5, r5, r5;
+        addk    r5, r5, r5;
+        addk    r5, r5, r6;
+        bra     r5;
+ex_lw_end: /* Exception handling of load word, ends */
+ex_sw:
+        /* Get the destination register number into r5 */
+        lbui    r5, r0, TOPHYS(ex_reg_op);
+        /* Form store_word jump table offset (sw_table + (8 * regnum)) */
+        la      r6, r0, TOPHYS(sw_table);
+        add     r5, r5, r5;
+        add     r5, r5, r5;
+        add     r5, r5, r5;
+        add     r5, r5, r6;
+        bra     r5;
+ex_sw_tail:
+        mfs     r6, resr;
+        nop
+        andi    r6, r6, 0x800; /* Extract ESR[W] */
+        beqi    r6, ex_shw;
+        /* Get the word - delay slot */
+        swi     r3, r0, TOPHYS(ex_tmp_data_loc_0);
+        /* Store the word, byte-by-byte into destination address */
+        lbui    r3, r0, TOPHYS(ex_tmp_data_loc_0);
+        sbi     r3, r4, 0;
+        lbui    r3, r0, TOPHYS(ex_tmp_data_loc_1);
+        sbi     r3, r4, 1;
+        lbui    r3, r0, TOPHYS(ex_tmp_data_loc_2);
+        sbi     r3, r4, 2;
+        lbui    r3, r0, TOPHYS(ex_tmp_data_loc_3);
+        sbi     r3, r4, 3;
+        bri     ex_handler_done;
+
+ex_shw:
+        /* Store the lower half-word, byte-by-byte into destination address */
+        swi     r3, r0, TOPHYS(ex_tmp_data_loc_0);
+        lbui    r3, r0, TOPHYS(ex_tmp_data_loc_2);
+        sbi     r3, r4, 0;
+        lbui    r3, r0, TOPHYS(ex_tmp_data_loc_3);
+        sbi     r3, r4, 1;
+ex_sw_end: /* Exception handling of store word, ends. */
+
+ex_handler_done:
+        lwi     r5, r1, 0 /* RMSR */
+        mts     rmsr, r5
+        nop
+        lwi     r3, r1, PT_R3
+        lwi     r4, r1, PT_R4
+        lwi     r5, r1, PT_R5
+        lwi     r6, r1, PT_R6
+        lwi     r17, r1, PT_R17
+
+        rted    r17, 0
+        addik   r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
+
+.end _hw_exception_handler
+
+ex_handler_unhandled:
+/* FIXME add handle function for unhandled exception - dump register */
+        bri 0
+
+.section .text
+.align 4
+lw_table:
+lw_r0:          R3_TO_LWREG     (0);
+lw_r1:          LWREG_NOP;
+lw_r2:          R3_TO_LWREG     (2);
+lw_r3:          R3_TO_LWREG_V   (3);
+lw_r4:          R3_TO_LWREG_V   (4);
+lw_r5:          R3_TO_LWREG_V   (5);
+lw_r6:          R3_TO_LWREG_V   (6);
+lw_r7:          R3_TO_LWREG     (7);
+lw_r8:          R3_TO_LWREG     (8);
+lw_r9:          R3_TO_LWREG     (9);
+lw_r10:         R3_TO_LWREG     (10);
+lw_r11:         R3_TO_LWREG     (11);
+lw_r12:         R3_TO_LWREG     (12);
+lw_r13:         R3_TO_LWREG     (13);
+lw_r14:         R3_TO_LWREG     (14);
+lw_r15:         R3_TO_LWREG     (15);
+lw_r16:         R3_TO_LWREG     (16);
+lw_r17:         LWREG_NOP;
+lw_r18:         R3_TO_LWREG     (18);
+lw_r19:         R3_TO_LWREG     (19);
+lw_r20:         R3_TO_LWREG     (20);
+lw_r21:         R3_TO_LWREG     (21);
+lw_r22:         R3_TO_LWREG     (22);
+lw_r23:         R3_TO_LWREG     (23);
+lw_r24:         R3_TO_LWREG     (24);
+lw_r25:         R3_TO_LWREG     (25);
+lw_r26:         R3_TO_LWREG     (26);
+lw_r27:         R3_TO_LWREG     (27);
+lw_r28:         R3_TO_LWREG     (28);
+lw_r29:         R3_TO_LWREG     (29);
+lw_r30:         R3_TO_LWREG     (30);
+lw_r31:         R3_TO_LWREG     (31);
+
+sw_table:
+sw_r0:          SWREG_TO_R3     (0);
+sw_r1:          SWREG_NOP;
+sw_r2:          SWREG_TO_R3     (2);
+sw_r3:          SWREG_TO_R3_V   (3);
+sw_r4:          SWREG_TO_R3_V   (4);
+sw_r5:          SWREG_TO_R3_V   (5);
+sw_r6:          SWREG_TO_R3_V   (6);
+sw_r7:          SWREG_TO_R3     (7);
+sw_r8:          SWREG_TO_R3     (8);
+sw_r9:          SWREG_TO_R3     (9);
+sw_r10:         SWREG_TO_R3     (10);
+sw_r11:         SWREG_TO_R3     (11);
+sw_r12:         SWREG_TO_R3     (12);
+sw_r13:         SWREG_TO_R3     (13);
+sw_r14:         SWREG_TO_R3     (14);
+sw_r15:         SWREG_TO_R3     (15);
+sw_r16:         SWREG_TO_R3     (16);
+sw_r17:         SWREG_NOP;
+sw_r18:         SWREG_TO_R3     (18);
+sw_r19:         SWREG_TO_R3     (19);
+sw_r20:         SWREG_TO_R3     (20);
+sw_r21:         SWREG_TO_R3     (21);
+sw_r22:         SWREG_TO_R3     (22);
+sw_r23:         SWREG_TO_R3     (23);
+sw_r24:         SWREG_TO_R3     (24);
+sw_r25:         SWREG_TO_R3     (25);
+sw_r26:         SWREG_TO_R3     (26);
+sw_r27:         SWREG_TO_R3     (27);
+sw_r28:         SWREG_TO_R3     (28);
+sw_r29:         SWREG_TO_R3     (29);
+sw_r30:         SWREG_TO_R3     (30);
+sw_r31:         SWREG_TO_R3     (31);
+
+/* Temporary data structures used in the handler */
+.section .data
+.align 4
+ex_tmp_data_loc_0:
+        .byte 0
+ex_tmp_data_loc_1:
+        .byte 0
+ex_tmp_data_loc_2:
+        .byte 0
+ex_tmp_data_loc_3:
+        .byte 0
+ex_reg_op:
+        .byte 0
diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c
new file mode 100644
index 000000000000..48eb9fb255fa
--- /dev/null
+++ b/arch/microblaze/kernel/init_task.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+
+#include <asm/pgtable.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+union thread_union init_thread_union
+        __attribute__((__section__(".data.init_task"))) =
+{ INIT_THREAD_INFO(init_task) };
+
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
new file mode 100644
index 000000000000..a69d3e3c2fd4
--- /dev/null
+++ b/arch/microblaze/kernel/intc.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/page.h>
+#include <linux/io.h>
+
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_SELFMOD_INTC
+#include <asm/selfmod.h>
+#define INTC_BASE       BARRIER_BASE_ADDR
+#else
+static unsigned int intc_baseaddr;
+#define INTC_BASE       intc_baseaddr
+#endif
+
+unsigned int nr_irq;
+
+/* No one else should require these constants, so define them locally here. */
+#define ISR 0x00                        /* Interrupt Status Register */
+#define IPR 0x04                        /* Interrupt Pending Register */
+#define IER 0x08                        /* Interrupt Enable Register */
+#define IAR 0x0c                        /* Interrupt Acknowledge Register */
+#define SIE 0x10                        /* Set Interrupt Enable bits */
+#define CIE 0x14                        /* Clear Interrupt Enable bits */
+#define IVR 0x18                        /* Interrupt Vector Register */
+#define MER 0x1c                        /* Master Enable Register */
+
+#define MER_ME (1<<0)
+#define MER_HIE (1<<1)
+
+static void intc_enable_or_unmask(unsigned int irq)
+{
+        pr_debug("enable_or_unmask: %d\n", irq);
+        out_be32(INTC_BASE + SIE, 1 << irq);
+}
+
+static void intc_disable_or_mask(unsigned int irq)
+{
+        pr_debug("disable: %d\n", irq);
+        out_be32(INTC_BASE + CIE, 1 << irq);
+}
+
+static void intc_ack(unsigned int irq)
+{
+        pr_debug("ack: %d\n", irq);
+        out_be32(INTC_BASE + IAR, 1 << irq);
+}
+
+static void intc_mask_ack(unsigned int irq)
+{
+        unsigned long mask = 1 << irq;
+        pr_debug("disable_and_ack: %d\n", irq);
+        out_be32(INTC_BASE + CIE, mask);
+        out_be32(INTC_BASE + IAR, mask);
+}
+
+static void intc_end(unsigned int irq)
+{
+        unsigned long mask = 1 << irq;
+        pr_debug("end: %d\n", irq);
+        if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+                out_be32(INTC_BASE + SIE, mask);
+                /* ack level sensitive intr */
+                if (irq_desc[irq].status & IRQ_LEVEL)
+                        out_be32(INTC_BASE + IAR, mask);
+        }
+}
+
+static struct irq_chip intc_dev = {
+        .name = "Xilinx INTC",
+        .unmask = intc_enable_or_unmask,
+        .mask = intc_disable_or_mask,
+        .ack = intc_ack,
+        .mask_ack = intc_mask_ack,
+        .end = intc_end,
+};
+
+unsigned int get_irq(struct pt_regs *regs)
+{
+        int irq;
+
+        /*
+         * NOTE: This function is the one that needs to be improved in
+         * order to handle multiple interrupt controllers. It currently
+         * is hardcoded to check for interrupts only on the first INTC.
+         */
+        irq = in_be32(INTC_BASE + IVR);
+        pr_debug("get_irq: %d\n", irq);
+
+        return irq;
+}
+
+void __init init_IRQ(void)
+{
+        u32 i, j, intr_type;
+        struct device_node *intc = NULL;
+#ifdef CONFIG_SELFMOD_INTC
+        unsigned int intc_baseaddr = 0;
+        static int arr_func[] = {
+                                (int)&get_irq,
+                                (int)&intc_enable_or_unmask,
+                                (int)&intc_disable_or_mask,
+                                (int)&intc_mask_ack,
+                                (int)&intc_ack,
+                                (int)&intc_end,
+                                0
+                        };
+#endif
+        static char *intc_list[] = {
+                                "xlnx,xps-intc-1.00.a",
+                                "xlnx,opb-intc-1.00.c",
+                                "xlnx,opb-intc-1.00.b",
+                                "xlnx,opb-intc-1.00.a",
+                                NULL
+                        };
+
+        for (j = 0; intc_list[j] != NULL; j++) {
+                intc = of_find_compatible_node(NULL, NULL, intc_list[j]);
+                if (intc)
+                        break;
+        }
+
+        intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
+        intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
+        nr_irq = *(int *) of_get_property(intc, "xlnx,num-intr-inputs", NULL);
+
+        intr_type =
+                *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
+        if (intr_type >= (1 << nr_irq))
+                printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+
+#ifdef CONFIG_SELFMOD_INTC
+        selfmod_function((int *) arr_func, intc_baseaddr);
+#endif
+        printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n",
+                intc_list[j], intc_baseaddr, nr_irq, intr_type);
+
+        /*
+         * Disable all external interrupts until they are
+         * explicity requested.
+         */
+        out_be32(intc_baseaddr + IER, 0);
+
+        /* Acknowledge any pending interrupts just in case. */
+        out_be32(intc_baseaddr + IAR, 0xffffffff);
+
+        /* Turn on the Master Enable. */
+        out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
+
+        for (i = 0; i < nr_irq; ++i) {
+                if (intr_type & (0x00000001 << i)) {
+                        set_irq_chip_and_handler_name(i, &intc_dev,
+                                handle_edge_irq, intc_dev.name);
+                        irq_desc[i].status &= ~IRQ_LEVEL;
+                } else {
+                        set_irq_chip_and_handler_name(i, &intc_dev,
+                                handle_level_irq, intc_dev.name);
+                        irq_desc[i].status |= IRQ_LEVEL;
+                }
+        }
+}
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
new file mode 100644
index 000000000000..f688ee93e3b9
--- /dev/null
+++ b/arch/microblaze/kernel/irq.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
+#include <linux/irqflags.h>
+#include <linux/seq_file.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+
+#include <asm/prom.h>
+
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
+{
+        struct of_irq oirq;
+
+        if (of_irq_map_one(dev, index, &oirq))
+                return NO_IRQ;
+
+        return oirq.specifier[0];
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+        printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+static u32 concurrent_irq;
+
+void do_IRQ(struct pt_regs *regs)
+{
+        unsigned int irq;
+        struct pt_regs *old_regs = set_irq_regs(regs);
+
+        irq_enter();
+        irq = get_irq(regs);
+next_irq:
+        BUG_ON(irq == -1U);
+        generic_handle_irq(irq);
+
+        irq = get_irq(regs);
+        if (irq != -1U) {
+                pr_debug("next irq: %d\n", irq);
+                ++concurrent_irq;
+                goto next_irq;
+        }
+
+        irq_exit();
+        set_irq_regs(old_regs);
+}
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+        int i = *(loff_t *) v, j;
+        struct irqaction *action;
+        unsigned long flags;
+
+        if (i == 0) {
+                seq_printf(p, "         ");
+                for_each_online_cpu(j)
+                        seq_printf(p, "CPU%-8d", j);
+                seq_putc(p, '\n');
+        }
+
+        if (i < nr_irq) {
+                spin_lock_irqsave(&irq_desc[i].lock, flags);
+                action = irq_desc[i].action;
+                if (!action)
+                        goto skip;
+                seq_printf(p, "%3d: ", i);
+#ifndef CONFIG_SMP
+                seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+                for_each_online_cpu(j)
+                        seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+                seq_printf(p, " %8s", irq_desc[i].status &
+                                        IRQ_LEVEL ? "level" : "edge");
+                seq_printf(p, " %8s", irq_desc[i].chip->name);
+                seq_printf(p, "  %s", action->name);
+
+                for (action = action->next; action; action = action->next)
+                        seq_printf(p, ", %s", action->name);
+
+                seq_putc(p, '\n');
+skip:
+                spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+        }
+        return 0;
+}
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
new file mode 100644
index 000000000000..5f71790e3c3c
--- /dev/null
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+
+#include <asm/checksum.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <linux/uaccess.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+EXPORT_SYMBOL(__ashldi3);
+extern void __ashrdi3(void);
+EXPORT_SYMBOL(__ashrdi3);
+extern void __divsi3(void);
+EXPORT_SYMBOL(__divsi3);
+extern void __lshrdi3(void);
+EXPORT_SYMBOL(__lshrdi3);
+extern void __modsi3(void);
+EXPORT_SYMBOL(__modsi3);
+extern void __mulsi3(void);
+EXPORT_SYMBOL(__mulsi3);
+extern void __muldi3(void);
+EXPORT_SYMBOL(__muldi3);
+extern void __ucmpdi2(void);
+EXPORT_SYMBOL(__ucmpdi2);
+extern void __udivsi3(void);
+EXPORT_SYMBOL(__udivsi3);
+extern void __umodsi3(void);
+EXPORT_SYMBOL(__umodsi3);
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
new file mode 100644
index 000000000000..51414171326f
--- /dev/null
+++ b/arch/microblaze/kernel/module.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+
+#include <asm/pgtable.h>
+
+void *module_alloc(unsigned long size)
+{
+        void *ret;
+        ret = (size == 0) ? NULL : vmalloc(size);
+        pr_debug("module_alloc (%08lx@%08lx)\n", size, (unsigned long int)ret);
+        return ret;
+}
+
+void module_free(struct module *module, void *region)
+{
+        pr_debug("module_free(%s,%08lx)\n", module->name,
+                                        (unsigned long)region);
+        vfree(region);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+                                Elf_Shdr *sechdrs,
+                                char *secstrings,
+                                struct module *mod)
+{
+        return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab,
+        unsigned int symindex, unsigned int relsec, struct module *module)
+{
+        printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+                module->name);
+        return -ENOEXEC;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+        unsigned int symindex, unsigned int relsec, struct module *module)
+{
+
+        unsigned int i;
+        Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+        Elf32_Sym *sym;
+        unsigned long int *location;
+        unsigned long int locoffs;
+        unsigned long int value;
+#if __GNUC__ < 4
+        unsigned long int old_value;
+#endif
+
+        pr_debug("Applying add relocation section %u to %u\n",
+                relsec, sechdrs[relsec].sh_info);
+
+        for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+
+                location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr +
+                                rela[i].r_offset;
+                sym = (Elf32_Sym *)sechdrs[symindex].sh_addr +
+                        ELF32_R_SYM(rela[i].r_info);
+                value = sym->st_value + rela[i].r_addend;
+
+                switch (ELF32_R_TYPE(rela[i].r_info)) {
+
+                /*
+                 * Be careful! mb-gcc / mb-ld splits the relocs between the
+                 * text and the reloc table. In general this means we must
+                 * read the current contents of (*location), add any offset
+                 * then store the result back in
+                 */
+
+                case R_MICROBLAZE_32:
+#if __GNUC__ < 4
+                        old_value = *location;
+                        *location = value + old_value;
+
+                        pr_debug("R_MICROBLAZE_32 (%08lx->%08lx)\n",
+                                old_value, value);
+#else
+                        *location = value;
+#endif
+                        break;
+
+                case R_MICROBLAZE_64:
+#if __GNUC__ < 4
+                        /* Split relocs only required/used pre gcc4.1.1 */
+                        old_value = ((location[0] & 0x0000FFFF) << 16) |
+                                        (location[1] & 0x0000FFFF);
+                        value += old_value;
+#endif
+                        location[0] = (location[0] & 0xFFFF0000) |
+                                        (value >> 16);
+                        location[1] = (location[1] & 0xFFFF0000) |
+                                        (value & 0xFFFF);
+#if __GNUC__ < 4
+                        pr_debug("R_MICROBLAZE_64 (%08lx->%08lx)\n",
+                                old_value, value);
+#endif
+                        break;
+
+                case R_MICROBLAZE_64_PCREL:
+                        locoffs = (location[0] & 0xFFFF) << 16 |
+                                (location[1] & 0xFFFF);
+                        value -= (unsigned long int)(location) + 4 +
+                                locoffs;
+                        location[0] = (location[0] & 0xFFFF0000) |
+                                        (value >> 16);
+                        location[1] = (location[1] & 0xFFFF0000) |
+                                        (value & 0xFFFF);
+                        pr_debug("R_MICROBLAZE_64_PCREL (%08lx)\n",
+                                value);
+                        break;
+
+                case R_MICROBLAZE_NONE:
+                        pr_debug("R_MICROBLAZE_NONE\n");
+                        break;
+
+                default:
+                        printk(KERN_ERR "module %s: "
+                                "Unknown relocation: %u\n",
+                                module->name,
+                                ELF32_R_TYPE(rela->r_info));
+                        return -ENOEXEC;
+                }
+        }
+        return 0;
+}
+
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+                struct module *module)
+{
+        return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c
new file mode 100644
index 000000000000..717edf4ad0b4
--- /dev/null
+++ b/arch/microblaze/kernel/of_device.c
@@ -0,0 +1,115 @@
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+
+#include <linux/errno.h>
+
+void of_device_make_bus_id(struct of_device *dev)
+{
+        static atomic_t bus_no_reg_magic;
+        struct device_node *node = dev->node;
+        char *name = dev->dev.bus_id;
+        const u32 *reg;
+        u64 addr;
+        int magic;
+
+        /*
+         * For MMIO, get the physical address
+         */
+        reg = of_get_property(node, "reg", NULL);
+        if (reg) {
+                addr = of_translate_address(node, reg);
+                if (addr != OF_BAD_ADDR) {
+                        snprintf(name, BUS_ID_SIZE,
+                                 "%llx.%s", (unsigned long long)addr,
+                                 node->name);
+                        return;
+                }
+        }
+
+        /*
+         * No BusID, use the node name and add a globally incremented
+         * counter (and pray...)
+         */
+        magic = atomic_add_return(1, &bus_no_reg_magic);
+        snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1);
+}
+EXPORT_SYMBOL(of_device_make_bus_id);
+
+struct of_device *of_device_alloc(struct device_node *np,
+                                  const char *bus_id,
+                                  struct device *parent)
+{
+        struct of_device *dev;
+
+        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+        if (!dev)
+                return NULL;
+
+        dev->node = of_node_get(np);
+        dev->dev.dma_mask = &dev->dma_mask;
+        dev->dev.parent = parent;
+        dev->dev.release = of_release_dev;
+        dev->dev.archdata.of_node = np;
+
+        if (bus_id)
+                strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+        else
+                of_device_make_bus_id(dev);
+
+        return dev;
+}
+EXPORT_SYMBOL(of_device_alloc);
+
+int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+        struct of_device *ofdev;
+        const char *compat;
+        int seen = 0, cplen, sl;
+
+        if (!dev)
+                return -ENODEV;
+
+        ofdev = to_of_device(dev);
+
+        if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+                return -ENOMEM;
+
+        if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+                return -ENOMEM;
+
+        /* Since the compatible field can contain pretty much anything
+         * it's not really legal to split it out with commas. We split it
+         * up using a number of environment variables instead. */
+
+        compat = of_get_property(ofdev->node, "compatible", &cplen);
+        while (compat && *compat && cplen > 0) {
+                if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
+                        return -ENOMEM;
+
+                sl = strlen(compat) + 1;
+                compat += sl;
+                cplen -= sl;
+                seen++;
+        }
+
+        if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen))
+                return -ENOMEM;
+
+        /* modalias is trickier, we add it in 2 steps */
+        if (add_uevent_var(env, "MODALIAS="))
+                return -ENOMEM;
+        sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1],
+                                    sizeof(env->buf) - env->buflen);
+        if (sl >= (sizeof(env->buf) - env->buflen))
+                return -ENOMEM;
+        env->buflen += sl;
+
+        return 0;
+}
+EXPORT_SYMBOL(of_device_uevent);
diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c
new file mode 100644
index 000000000000..acf4574d0f18
--- /dev/null
+++ b/arch/microblaze/kernel/of_platform.c
@@ -0,0 +1,201 @@
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                       <benh@kernel.crashing.org>
+ *    and                Arnd Bergmann, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <linux/errno.h>
+#include <linux/topology.h>
+#include <asm/atomic.h>
+
+struct bus_type of_platform_bus_type = {
+       .uevent  = of_device_uevent,
+};
+EXPORT_SYMBOL(of_platform_bus_type);
+
+static int __init of_bus_driver_init(void)
+{
+        return of_bus_type_init(&of_platform_bus_type, "of_platform");
+}
+postcore_initcall(of_bus_driver_init);
+
+struct of_device *of_platform_device_create(struct device_node *np,
+                                            const char *bus_id,
+                                            struct device *parent)
+{
+        struct of_device *dev;
+
+        dev = of_device_alloc(np, bus_id, parent);
+        if (!dev)
+                return NULL;
+
+        dev->dma_mask = 0xffffffffUL;
+        dev->dev.bus = &of_platform_bus_type;
+
+        /* We do not fill the DMA ops for platform devices by default.
+         * This is currently the responsibility of the platform code
+         * to do such, possibly using a device notifier
+         */
+
+        if (of_device_register(dev) != 0) {
+                of_device_free(dev);
+                return NULL;
+        }
+
+        return dev;
+}
+EXPORT_SYMBOL(of_platform_device_create);
+
+/**
+ * of_platform_bus_create - Create an OF device for a bus node and all its
+ * children. Optionally recursively instanciate matching busses.
+ * @bus: device node of the bus to instanciate
+ * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
+ * disallow recursive creation of child busses
+ */
+static int of_platform_bus_create(const struct device_node *bus,
+                                  const struct of_device_id *matches,
+                                  struct device *parent)
+{
+        struct device_node *child;
+        struct of_device *dev;
+        int rc = 0;
+
+        for_each_child_of_node(bus, child) {
+                pr_debug("   create child: %s\n", child->full_name);
+                dev = of_platform_device_create(child, NULL, parent);
+                if (dev == NULL)
+                        rc = -ENOMEM;
+                else if (!of_match_node(matches, child))
+                        continue;
+                if (rc == 0) {
+                        pr_debug("   and sub busses\n");
+                        rc = of_platform_bus_create(child, matches, &dev->dev);
+                }
+                if (rc) {
+                        of_node_put(child);
+                        break;
+                }
+        }
+        return rc;
+}
+
+
+/**
+ * of_platform_bus_probe - Probe the device-tree for platform busses
+ * @root: parent of the first level to probe or NULL for the root of the tree
+ * @matches: match table, NULL to use the default
+ * @parent: parent to hook devices from, NULL for toplevel
+ *
+ * Note that children of the provided root are not instanciated as devices
+ * unless the specified root itself matches the bus list and is not NULL.
+ */
+
+int of_platform_bus_probe(struct device_node *root,
+                          const struct of_device_id *matches,
+                          struct device *parent)
+{
+        struct device_node *child;
+        struct of_device *dev;
+        int rc = 0;
+
+        if (matches == NULL)
+                matches = of_default_bus_ids;
+        if (matches == OF_NO_DEEP_PROBE)
+                return -EINVAL;
+        if (root == NULL)
+                root = of_find_node_by_path("/");
+        else
+                of_node_get(root);
+
+        pr_debug("of_platform_bus_probe()\n");
+        pr_debug(" starting at: %s\n", root->full_name);
+
+        /* Do a self check of bus type, if there's a match, create
+         * children
+         */
+        if (of_match_node(matches, root)) {
+                pr_debug(" root match, create all sub devices\n");
+                dev = of_platform_device_create(root, NULL, parent);
+                if (dev == NULL) {
+                        rc = -ENOMEM;
+                        goto bail;
+                }
+                pr_debug(" create all sub busses\n");
+                rc = of_platform_bus_create(root, matches, &dev->dev);
+                goto bail;
+        }
+        for_each_child_of_node(root, child) {
+                if (!of_match_node(matches, child))
+                        continue;
+
+                pr_debug("  match: %s\n", child->full_name);
+                dev = of_platform_device_create(child, NULL, parent);
+                if (dev == NULL)
+                        rc = -ENOMEM;
+                else
+                        rc = of_platform_bus_create(child, matches, &dev->dev);
+                if (rc) {
+                        of_node_put(child);
+                        break;
+                }
+        }
+ bail:
+        of_node_put(root);
+        return rc;
+}
+EXPORT_SYMBOL(of_platform_bus_probe);
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+        return to_of_device(dev)->node == data;
+}
+
+struct of_device *of_find_device_by_node(struct device_node *np)
+{
+        struct device *dev;
+
+        dev = bus_find_device(&of_platform_bus_type,
+                              NULL, np, of_dev_node_match);
+        if (dev)
+                return to_of_device(dev);
+        return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_node);
+
+static int of_dev_phandle_match(struct device *dev, void *data)
+{
+        phandle *ph = data;
+        return to_of_device(dev)->node->linux_phandle == *ph;
+}
+
+struct of_device *of_find_device_by_phandle(phandle ph)
+{
+        struct device *dev;
+
+        dev = bus_find_device(&of_platform_bus_type,
+                              NULL, &ph, of_dev_phandle_match);
+        if (dev)
+                return to_of_device(dev);
+        return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_phandle);
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
new file mode 100644
index 000000000000..60e9ed7d3132
--- /dev/null
+++ b/arch/microblaze/kernel/process.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+
+void show_regs(struct pt_regs *regs)
+{
+        printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode);
+        printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
+                                regs->r1, regs->r2, regs->r3, regs->r4);
+        printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
+                                regs->r5, regs->r6, regs->r7, regs->r8);
+        printk(KERN_INFO " r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n",
+                                regs->r9, regs->r10, regs->r11, regs->r12);
+        printk(KERN_INFO " r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n",
+                                regs->r13, regs->r14, regs->r15, regs->r16);
+        printk(KERN_INFO " r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n",
+                                regs->r17, regs->r18, regs->r19, regs->r20);
+        printk(KERN_INFO " r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n",
+                                regs->r21, regs->r22, regs->r23, regs->r24);
+        printk(KERN_INFO " r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n",
+                                regs->r25, regs->r26, regs->r27, regs->r28);
+        printk(KERN_INFO " r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n",
+                                regs->r29, regs->r30, regs->r31, regs->pc);
+        printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
+                                regs->msr, regs->ear, regs->esr, regs->fsr);
+        while (1)
+                ;
+}
+
+void (*pm_idle)(void);
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+static int hlt_counter = 1;
+
+void disable_hlt(void)
+{
+        hlt_counter++;
+}
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+        hlt_counter--;
+}
+EXPORT_SYMBOL(enable_hlt);
+
+static int __init nohlt_setup(char *__unused)
+{
+        hlt_counter = 1;
+        return 1;
+}
+__setup("nohlt", nohlt_setup);
+
+static int __init hlt_setup(char *__unused)
+{
+        hlt_counter = 0;
+        return 1;
+}
+__setup("hlt", hlt_setup);
+
+void default_idle(void)
+{
+        if (!hlt_counter) {
+                clear_thread_flag(TIF_POLLING_NRFLAG);
+                smp_mb__after_clear_bit();
+                local_irq_disable();
+                while (!need_resched())
+                        cpu_sleep();
+                local_irq_enable();
+                set_thread_flag(TIF_POLLING_NRFLAG);
+        } else
+                while (!need_resched())
+                        cpu_relax();
+}
+
+void cpu_idle(void)
+{
+        set_thread_flag(TIF_POLLING_NRFLAG);
+
+        /* endless idle loop with no priority at all */
+        while (1) {
+                void (*idle)(void) = pm_idle;
+
+                if (!idle)
+                        idle = default_idle;
+
+                tick_nohz_stop_sched_tick(1);
+                while (!need_resched())
+                        idle();
+                tick_nohz_restart_sched_tick();
+
+                preempt_enable_no_resched();
+                schedule();
+                preempt_disable();
+                check_pgt_cache();
+        }
+}
+
+void flush_thread(void)
+{
+}
+
+/* FIXME - here will be a proposed change -> remove nr parameter */
+int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+                unsigned long unused,
+                struct task_struct *p, struct pt_regs *regs)
+{
+        struct pt_regs *childregs = task_pt_regs(p);
+        struct thread_info *ti = task_thread_info(p);
+
+        *childregs = *regs;
+        if (user_mode(regs))
+                childregs->r1 = usp;
+        else
+                childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
+
+        memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+        ti->cpu_context.r1 = (unsigned long)childregs;
+        ti->cpu_context.msr = (unsigned long)childregs->msr;
+        ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
+
+        if (clone_flags & CLONE_SETTLS)
+                ;
+
+        return 0;
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+        struct cpu_context *ctx =
+                &(((struct thread_info *)(tsk->stack))->cpu_context);
+
+        /* Check whether the thread is blocked in resume() */
+        if (in_sched_functions(ctx->r15))
+                return (unsigned long)ctx->r15;
+        else
+                return ctx->r14;
+}
+
+static void kernel_thread_helper(int (*fn)(void *), void *arg)
+{
+        fn(arg);
+        do_exit(-1);
+}
+
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+        struct pt_regs regs;
+        int ret;
+
+        memset(&regs, 0, sizeof(regs));
+        /* store them in non-volatile registers */
+        regs.r5 = (unsigned long)fn;
+        regs.r6 = (unsigned long)arg;
+        local_save_flags(regs.msr);
+        regs.pc = (unsigned long)kernel_thread_helper;
+        regs.kernel_mode = 1;
+
+        ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+                        &regs, 0, NULL, NULL);
+
+        return ret;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+/* TBD (used by procfs) */
+        return 0;
+}
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
new file mode 100644
index 000000000000..475b1fac5cfd
--- /dev/null
+++ b/arch/microblaze/kernel/prom.c
@@ -0,0 +1,1147 @@
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras       August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ *    {engebret|bergner}@us.ibm.com
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/stringify.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/debugfs.h>
+#include <linux/irq.h>
+#include <linux/lmb.h>
+
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <linux/pci.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+
+static int __initdata dt_root_addr_cells;
+static int __initdata dt_root_size_cells;
+
+typedef u32 cell_t;
+
+static struct boot_param_header *initial_boot_params;
+
+/* export that to outside world */
+struct device_node *of_chosen;
+
+static inline char *find_flat_dt_string(u32 offset)
+{
+        return ((char *)initial_boot_params) +
+                initial_boot_params->off_dt_strings + offset;
+}
+
+/**
+ * This function is used to scan the flattened device-tree, it is
+ * used to extract the memory informations at boot before we can
+ * unflatten the tree
+ */
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+                                     const char *uname, int depth,
+                                     void *data),
+                           void *data)
+{
+        unsigned long p = ((unsigned long)initial_boot_params) +
+                initial_boot_params->off_dt_struct;
+        int rc = 0;
+        int depth = -1;
+
+        do {
+                u32 tag = *((u32 *)p);
+                char *pathp;
+
+                p += 4;
+                if (tag == OF_DT_END_NODE) {
+                        depth--;
+                        continue;
+                }
+                if (tag == OF_DT_NOP)
+                        continue;
+                if (tag == OF_DT_END)
+                        break;
+                if (tag == OF_DT_PROP) {
+                        u32 sz = *((u32 *)p);
+                        p += 8;
+                        if (initial_boot_params->version < 0x10)
+                                p = _ALIGN(p, sz >= 8 ? 8 : 4);
+                        p += sz;
+                        p = _ALIGN(p, 4);
+                        continue;
+                }
+                if (tag != OF_DT_BEGIN_NODE) {
+                        printk(KERN_WARNING "Invalid tag %x scanning flattened"
+                                " device tree !\n", tag);
+                        return -EINVAL;
+                }
+                depth++;
+                pathp = (char *)p;
+                p = _ALIGN(p + strlen(pathp) + 1, 4);
+                if ((*pathp) == '/') {
+                        char *lp, *np;
+                        for (lp = NULL, np = pathp; *np; np++)
+                                if ((*np) == '/')
+                                        lp = np+1;
+                        if (lp != NULL)
+                                pathp = lp;
+                }
+                rc = it(p, pathp, depth, data);
+                if (rc != 0)
+                        break;
+        } while (1);
+
+        return rc;
+}
+
+unsigned long __init of_get_flat_dt_root(void)
+{
+        unsigned long p = ((unsigned long)initial_boot_params) +
+                initial_boot_params->off_dt_struct;
+
+        while (*((u32 *)p) == OF_DT_NOP)
+                p += 4;
+        BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
+        p += 4;
+        return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
+/**
+ * This function can be used within scan_flattened_dt callback to get
+ * access to properties
+ */
+void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+                                unsigned long *size)
+{
+        unsigned long p = node;
+
+        do {
+                u32 tag = *((u32 *)p);
+                u32 sz, noff;
+                const char *nstr;
+
+                p += 4;
+                if (tag == OF_DT_NOP)
+                        continue;
+                if (tag != OF_DT_PROP)
+                        return NULL;
+
+                sz = *((u32 *)p);
+                noff = *((u32 *)(p + 4));
+                p += 8;
+                if (initial_boot_params->version < 0x10)
+                        p = _ALIGN(p, sz >= 8 ? 8 : 4);
+
+                nstr = find_flat_dt_string(noff);
+                if (nstr == NULL) {
+                        printk(KERN_WARNING "Can't find property index"
+                                " name !\n");
+                        return NULL;
+                }
+                if (strcmp(name, nstr) == 0) {
+                        if (size)
+                                *size = sz;
+                        return (void *)p;
+                }
+                p += sz;
+                p = _ALIGN(p, 4);
+        } while (1);
+}
+
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+        const char *cp;
+        unsigned long cplen, l;
+
+        cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+        if (cp == NULL)
+                return 0;
+        while (cplen > 0) {
+                if (strncasecmp(cp, compat, strlen(compat)) == 0)
+                        return 1;
+                l = strlen(cp) + 1;
+                cp += l;
+                cplen -= l;
+        }
+
+        return 0;
+}
+
+static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+                                        unsigned long align)
+{
+        void *res;
+
+        *mem = _ALIGN(*mem, align);
+        res = (void *)*mem;
+        *mem += size;
+
+        return res;
+}
+
+static unsigned long __init unflatten_dt_node(unsigned long mem,
+                                        unsigned long *p,
+                                        struct device_node *dad,
+                                        struct device_node ***allnextpp,
+                                        unsigned long fpsize)
+{
+        struct device_node *np;
+        struct property *pp, **prev_pp = NULL;
+        char *pathp;
+        u32 tag;
+        unsigned int l, allocl;
+        int has_name = 0;
+        int new_format = 0;
+
+        tag = *((u32 *)(*p));
+        if (tag != OF_DT_BEGIN_NODE) {
+                printk("Weird tag at start of node: %x\n", tag);
+                return mem;
+        }
+        *p += 4;
+        pathp = (char *)*p;
+        l = allocl = strlen(pathp) + 1;
+        *p = _ALIGN(*p + l, 4);
+
+        /* version 0x10 has a more compact unit name here instead of the full
+         * path. we accumulate the full path size using "fpsize", we'll rebuild
+         * it later. We detect this because the first character of the name is
+         * not '/'.
+         */
+        if ((*pathp) != '/') {
+                new_format = 1;
+                if (fpsize == 0) {
+                        /* root node: special case. fpsize accounts for path
+                         * plus terminating zero. root node only has '/', so
+                         * fpsize should be 2, but we want to avoid the first
+                         * level nodes to have two '/' so we use fpsize 1 here
+                         */
+                        fpsize = 1;
+                        allocl = 2;
+                } else {
+                        /* account for '/' and path size minus terminal 0
+                         * already in 'l'
+                         */
+                        fpsize += l;
+                        allocl = fpsize;
+                }
+        }
+
+        np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
+                                __alignof__(struct device_node));
+        if (allnextpp) {
+                memset(np, 0, sizeof(*np));
+                np->full_name = ((char *)np) + sizeof(struct device_node);
+                if (new_format) {
+                        char *p2 = np->full_name;
+                        /* rebuild full path for new format */
+                        if (dad && dad->parent) {
+                                strcpy(p2, dad->full_name);
+#ifdef DEBUG
+                                if ((strlen(p2) + l + 1) != allocl) {
+                                        pr_debug("%s: p: %d, l: %d, a: %d\n",
+                                                pathp, (int)strlen(p2),
+                                                l, allocl);
+                                }
+#endif
+                                p2 += strlen(p2);
+                        }
+                        *(p2++) = '/';
+                        memcpy(p2, pathp, l);
+                } else
+                        memcpy(np->full_name, pathp, l);
+                prev_pp = &np->properties;
+                **allnextpp = np;
+                *allnextpp = &np->allnext;
+                if (dad != NULL) {
+                        np->parent = dad;
+                        /* we temporarily use the next field as `last_child'*/
+                        if (dad->next == NULL)
+                                dad->child = np;
+                        else
+                                dad->next->sibling = np;
+                        dad->next = np;
+                }
+                kref_init(&np->kref);
+        }
+        while (1) {
+                u32 sz, noff;
+                char *pname;
+
+                tag = *((u32 *)(*p));
+                if (tag == OF_DT_NOP) {
+                        *p += 4;
+                        continue;
+                }
+                if (tag != OF_DT_PROP)
+                        break;
+                *p += 4;
+                sz = *((u32 *)(*p));
+                noff = *((u32 *)((*p) + 4));
+                *p += 8;
+                if (initial_boot_params->version < 0x10)
+                        *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+
+                pname = find_flat_dt_string(noff);
+                if (pname == NULL) {
+                        printk(KERN_INFO
+                                "Can't find property name in list !\n");
+                        break;
+                }
+                if (strcmp(pname, "name") == 0)
+                        has_name = 1;
+                l = strlen(pname) + 1;
+                pp = unflatten_dt_alloc(&mem, sizeof(struct property),
+                                        __alignof__(struct property));
+                if (allnextpp) {
+                        if (strcmp(pname, "linux,phandle") == 0) {
+                                np->node = *((u32 *)*p);
+                                if (np->linux_phandle == 0)
+                                        np->linux_phandle = np->node;
+                        }
+                        if (strcmp(pname, "ibm,phandle") == 0)
+                                np->linux_phandle = *((u32 *)*p);
+                        pp->name = pname;
+                        pp->length = sz;
+                        pp->value = (void *)*p;
+                        *prev_pp = pp;
+                        prev_pp = &pp->next;
+                }
+                *p = _ALIGN((*p) + sz, 4);
+        }
+        /* with version 0x10 we may not have the name property, recreate
+         * it here from the unit name if absent
+         */
+        if (!has_name) {
+                char *p1 = pathp, *ps = pathp, *pa = NULL;
+                int sz;
+
+                while (*p1) {
+                        if ((*p1) == '@')
+                                pa = p1;
+                        if ((*p1) == '/')
+                                ps = p1 + 1;
+                        p1++;
+                }
+                if (pa < ps)
+                        pa = p1;
+                sz = (pa - ps) + 1;
+                pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
+                                        __alignof__(struct property));
+                if (allnextpp) {
+                        pp->name = "name";
+                        pp->length = sz;
+                        pp->value = pp + 1;
+                        *prev_pp = pp;
+                        prev_pp = &pp->next;
+                        memcpy(pp->value, ps, sz - 1);
+                        ((char *)pp->value)[sz - 1] = 0;
+                        pr_debug("fixed up name for %s -> %s\n", pathp,
+                                (char *)pp->value);
+                }
+        }
+        if (allnextpp) {
+                *prev_pp = NULL;
+                np->name = of_get_property(np, "name", NULL);
+                np->type = of_get_property(np, "device_type", NULL);
+
+                if (!np->name)
+                        np->name = "<NULL>";
+                if (!np->type)
+                        np->type = "<NULL>";
+        }
+        while (tag == OF_DT_BEGIN_NODE) {
+                mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+                tag = *((u32 *)(*p));
+        }
+        if (tag != OF_DT_END_NODE) {
+                printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
+                return mem;
+        }
+        *p += 4;
+        return mem;
+}
+
+/**
+ * unflattens the device-tree passed by the firmware, creating the
+ * tree of struct device_node. It also fills the "name" and "type"
+ * pointers of the nodes so the normal device-tree walking functions
+ * can be used (this used to be done by finish_device_tree)
+ */
+void __init unflatten_device_tree(void)
+{
+        unsigned long start, mem, size;
+        struct device_node **allnextp = &allnodes;
+
+        pr_debug(" -> unflatten_device_tree()\n");
+
+        /* First pass, scan for size */
+        start = ((unsigned long)initial_boot_params) +
+                initial_boot_params->off_dt_struct;
+        size = unflatten_dt_node(0, &start, NULL, NULL, 0);
+        size = (size | 3) + 1;
+
+        pr_debug("  size is %lx, allocating...\n", size);
+
+        /* Allocate memory for the expanded device tree */
+        mem = lmb_alloc(size + 4, __alignof__(struct device_node));
+        mem = (unsigned long) __va(mem);
+
+        ((u32 *)mem)[size / 4] = 0xdeadbeef;
+
+        pr_debug("  unflattening %lx...\n", mem);
+
+        /* Second pass, do actual unflattening */
+        start = ((unsigned long)initial_boot_params) +
+                initial_boot_params->off_dt_struct;
+        unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
+        if (*((u32 *)start) != OF_DT_END)
+                printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
+                        *((u32 *)start));
+        if (((u32 *)mem)[size / 4] != 0xdeadbeef)
+                printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
+                        ((u32 *)mem)[size / 4]);
+        *allnextp = NULL;
+
+        /* Get pointer to OF "/chosen" node for use everywhere */
+        of_chosen = of_find_node_by_path("/chosen");
+        if (of_chosen == NULL)
+                of_chosen = of_find_node_by_path("/chosen@0");
+
+        pr_debug(" <- unflatten_device_tree()\n");
+}
+
+#define early_init_dt_scan_drconf_memory(node) 0
+
+static int __init early_init_dt_scan_cpus(unsigned long node,
+                                          const char *uname, int depth,
+                                          void *data)
+{
+        static int logical_cpuid;
+        char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+        const u32 *intserv;
+        int i, nthreads;
+        int found = 0;
+
+        /* We are scanning "cpu" nodes only */
+        if (type == NULL || strcmp(type, "cpu") != 0)
+                return 0;
+
+        /* Get physical cpuid */
+        intserv = of_get_flat_dt_prop(node, "reg", NULL);
+        nthreads = 1;
+
+        /*
+         * Now see if any of these threads match our boot cpu.
+         * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+         */
+        for (i = 0; i < nthreads; i++) {
+                /*
+                 * version 2 of the kexec param format adds the phys cpuid of
+                 * booted proc.
+                 */
+                if (initial_boot_params && initial_boot_params->version >= 2) {
+                        if (intserv[i] ==
+                                        initial_boot_params->boot_cpuid_phys) {
+                                found = 1;
+                                break;
+                        }
+                } else {
+                        /*
+                         * Check if it's the boot-cpu, set it's hw index now,
+                         * unfortunately this format did not support booting
+                         * off secondary threads.
+                         */
+                        if (of_get_flat_dt_prop(node,
+                                        "linux,boot-cpu", NULL) != NULL) {
+                                found = 1;
+                                break;
+                        }
+                }
+
+#ifdef CONFIG_SMP
+                /* logical cpu id is always 0 on UP kernels */
+                logical_cpuid++;
+#endif
+        }
+
+        if (found) {
+                pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
+                        intserv[i]);
+                boot_cpuid = logical_cpuid;
+        }
+
+        return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+static void __init early_init_dt_check_for_initrd(unsigned long node)
+{
+        unsigned long l;
+        u32 *prop;
+
+        pr_debug("Looking for initrd properties... ");
+
+        prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
+        if (prop) {
+                initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+
+                prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
+                if (prop) {
+                        initrd_end = (unsigned long)
+                                        __va(of_read_ulong(prop, l/4));
+                        initrd_below_start_ok = 1;
+                } else {
+                        initrd_start = 0;
+                }
+        }
+
+        pr_debug("initrd_start=0x%lx  initrd_end=0x%lx\n",
+                                        initrd_start, initrd_end);
+}
+#else
+static inline void early_init_dt_check_for_initrd(unsigned long node)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+static int __init early_init_dt_scan_chosen(unsigned long node,
+                                const char *uname, int depth, void *data)
+{
+        unsigned long l;
+        char *p;
+
+        pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+        if (depth != 1 ||
+                (strcmp(uname, "chosen") != 0 &&
+                                strcmp(uname, "chosen@0") != 0))
+                return 0;
+
+#ifdef CONFIG_KEXEC
+        lprop = (u64 *)of_get_flat_dt_prop(node,
+                                "linux,crashkernel-base", NULL);
+        if (lprop)
+                crashk_res.start = *lprop;
+
+        lprop = (u64 *)of_get_flat_dt_prop(node,
+                                "linux,crashkernel-size", NULL);
+        if (lprop)
+                crashk_res.end = crashk_res.start + *lprop - 1;
+#endif
+
+        early_init_dt_check_for_initrd(node);
+
+        /* Retreive command line */
+        p = of_get_flat_dt_prop(node, "bootargs", &l);
+        if (p != NULL && l > 0)
+                strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+        if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+                strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+        pr_debug("Command line is: %s\n", cmd_line);
+
+        /* break now */
+        return 1;
+}
+
+static int __init early_init_dt_scan_root(unsigned long node,
+                                const char *uname, int depth, void *data)
+{
+        u32 *prop;
+
+        if (depth != 0)
+                return 0;
+
+        prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+        dt_root_size_cells = (prop == NULL) ? 1 : *prop;
+        pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
+
+        prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+        dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
+        pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
+
+        /* break now */
+        return 1;
+}
+
+static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
+{
+        cell_t *p = *cellp;
+
+        *cellp = p + s;
+        return of_read_number(p, s);
+}
+
+static int __init early_init_dt_scan_memory(unsigned long node,
+                                const char *uname, int depth, void *data)
+{
+        char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+        cell_t *reg, *endp;
+        unsigned long l;
+
+        /* Look for the ibm,dynamic-reconfiguration-memory node */
+/*      if (depth == 1 &&
+                strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+                return early_init_dt_scan_drconf_memory(node);
+*/
+        /* We are scanning "memory" nodes only */
+        if (type == NULL) {
+                /*
+                 * The longtrail doesn't have a device_type on the
+                 * /memory node, so look for the node called /memory@0.
+                 */
+                if (depth != 1 || strcmp(uname, "memory@0") != 0)
+                        return 0;
+        } else if (strcmp(type, "memory") != 0)
+                return 0;
+
+        reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+        if (reg == NULL)
+                reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
+        if (reg == NULL)
+                return 0;
+
+        endp = reg + (l / sizeof(cell_t));
+
+        pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
+                uname, l, reg[0], reg[1], reg[2], reg[3]);
+
+        while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+                u64 base, size;
+
+                base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+                size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+                if (size == 0)
+                        continue;
+                pr_debug(" - %llx ,  %llx\n", (unsigned long long)base,
+                        (unsigned long long)size);
+
+                lmb_add(base, size);
+        }
+        return 0;
+}
+
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+        unsigned long tmp;
+
+        if (phyp_dump_info->reserve_bootvar)
+                return phyp_dump_info->reserve_bootvar;
+
+        /* divide by 20 to get 5% of value */
+        tmp = lmb_end_of_DRAM();
+        do_div(tmp, 20);
+
+        /* round it down in multiples of 256 */
+        tmp = tmp & ~0x0FFFFFFFUL;
+
+        return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+        unsigned long base, size;
+        unsigned long variable_reserve_size;
+
+        if (!phyp_dump_info->phyp_dump_configured) {
+                printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+                return;
+        }
+
+        if (!phyp_dump_info->phyp_dump_at_boot) {
+                printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+                return;
+        }
+
+        variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+        if (phyp_dump_info->phyp_dump_is_active) {
+                /* Reserve *everything* above RMR.Area freed by userland tools*/
+                base = variable_reserve_size;
+                size = lmb_end_of_DRAM() - base;
+
+                /* XXX crashed_ram_end is wrong, since it may be beyond
+                 * the memory_limit, it will need to be adjusted. */
+                lmb_reserve(base, size);
+
+                phyp_dump_info->init_reserve_start = base;
+                phyp_dump_info->init_reserve_size = size;
+        } else {
+                size = phyp_dump_info->cpu_state_size +
+                        phyp_dump_info->hpte_region_size +
+                        variable_reserve_size;
+                base = lmb_end_of_DRAM() - size;
+                lmb_reserve(base, size);
+                phyp_dump_info->init_reserve_start = base;
+                phyp_dump_info->init_reserve_size = size;
+        }
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
+
+#ifdef CONFIG_EARLY_PRINTK
+/* MS this is Microblaze specifig function */
+static int __init early_init_dt_scan_serial(unsigned long node,
+                                const char *uname, int depth, void *data)
+{
+        unsigned long l;
+        char *p;
+        int *addr;
+
+        pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+/* find all serial nodes */
+        if (strncmp(uname, "serial", 6) != 0)
+                return 0;
+
+        early_init_dt_check_for_initrd(node);
+
+/* find compatible node with uartlite */
+        p = of_get_flat_dt_prop(node, "compatible", &l);
+        if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
+                        (strncmp(p, "xlnx,opb-uartlite", 17) != 0))
+                return 0;
+
+        addr = of_get_flat_dt_prop(node, "reg", &l);
+        return *addr; /* return address */
+}
+
+/* this function is looking for early uartlite console - Microblaze specific */
+int __init early_uartlite_console(void)
+{
+        return of_scan_flat_dt(early_init_dt_scan_serial, NULL);
+}
+#endif
+
+void __init early_init_devtree(void *params)
+{
+        pr_debug(" -> early_init_devtree(%p)\n", params);
+
+        /* Setup flat device-tree pointer */
+        initial_boot_params = params;
+
+#ifdef CONFIG_PHYP_DUMP
+        /* scan tree to see if dump occured during last boot */
+        of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
+        /* Retrieve various informations from the /chosen node of the
+         * device-tree, including the platform type, initrd location and
+         * size, TCE reserve, and more ...
+         */
+        of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+
+        /* Scan memory nodes and rebuild LMBs */
+        lmb_init();
+        of_scan_flat_dt(early_init_dt_scan_root, NULL);
+        of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+
+        /* Save command line for /proc/cmdline and then parse parameters */
+        strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+        parse_early_param();
+
+        lmb_analyze();
+
+        pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+
+        pr_debug("Scanning CPUs ...\n");
+
+        /* Retreive CPU related informations from the flat tree
+         * (altivec support, boot CPU ID, ...)
+         */
+        of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+
+        pr_debug(" <- early_init_devtree()\n");
+}
+
+/**
+ * Indicates whether the root node has a given value in its
+ * compatible property.
+ */
+int machine_is_compatible(const char *compat)
+{
+        struct device_node *root;
+        int rc = 0;
+
+        root = of_find_node_by_path("/");
+        if (root) {
+                rc = of_device_is_compatible(root, compat);
+                of_node_put(root);
+        }
+        return rc;
+}
+EXPORT_SYMBOL(machine_is_compatible);
+
+/*******
+ *
+ * New implementation of the OF "find" APIs, return a refcounted
+ * object, call of_node_put() when done.  The device tree and list
+ * are protected by a rw_lock.
+ *
+ * Note that property management will need some locking as well,
+ * this isn't dealt with yet.
+ *
+ *******/
+
+/**
+ *      of_find_node_by_phandle - Find a node given a phandle
+ *      @handle:        phandle of the node to find
+ *
+ *      Returns a node pointer with refcount incremented, use
+ *      of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+        struct device_node *np;
+
+        read_lock(&devtree_lock);
+        for (np = allnodes; np != NULL; np = np->allnext)
+                if (np->linux_phandle == handle)
+                        break;
+        of_node_get(np);
+        read_unlock(&devtree_lock);
+        return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+/**
+ *      of_find_all_nodes - Get next node in global list
+ *      @prev:  Previous node or NULL to start iteration
+ *              of_node_put() will be called on it
+ *
+ *      Returns a node pointer with refcount incremented, use
+ *      of_node_put() on it when done.
+ */
+struct device_node *of_find_all_nodes(struct device_node *prev)
+{
+        struct device_node *np;
+
+        read_lock(&devtree_lock);
+        np = prev ? prev->allnext : allnodes;
+        for (; np != NULL; np = np->allnext)
+                if (of_node_get(np))
+                        break;
+        of_node_put(prev);
+        read_unlock(&devtree_lock);
+        return np;
+}
+EXPORT_SYMBOL(of_find_all_nodes);
+
+/**
+ *      of_node_get - Increment refcount of a node
+ *      @node:  Node to inc refcount, NULL is supported to
+ *              simplify writing of callers
+ *
+ *      Returns node.
+ */
+struct device_node *of_node_get(struct device_node *node)
+{
+        if (node)
+                kref_get(&node->kref);
+        return node;
+}
+EXPORT_SYMBOL(of_node_get);
+
+static inline struct device_node *kref_to_device_node(struct kref *kref)
+{
+        return container_of(kref, struct device_node, kref);
+}
+
+/**
+ *      of_node_release - release a dynamically allocated node
+ *      @kref:  kref element of the node to be released
+ *
+ *      In of_node_put() this function is passed to kref_put()
+ *      as the destructor.
+ */
+static void of_node_release(struct kref *kref)
+{
+        struct device_node *node = kref_to_device_node(kref);
+        struct property *prop = node->properties;
+
+        /* We should never be releasing nodes that haven't been detached. */
+        if (!of_node_check_flag(node, OF_DETACHED)) {
+                printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n",
+                        node->full_name);
+                dump_stack();
+                kref_init(&node->kref);
+                return;
+        }
+
+        if (!of_node_check_flag(node, OF_DYNAMIC))
+                return;
+
+        while (prop) {
+                struct property *next = prop->next;
+                kfree(prop->name);
+                kfree(prop->value);
+                kfree(prop);
+                prop = next;
+
+                if (!prop) {
+                        prop = node->deadprops;
+                        node->deadprops = NULL;
+                }
+        }
+        kfree(node->full_name);
+        kfree(node->data);
+        kfree(node);
+}
+
+/**
+ *      of_node_put - Decrement refcount of a node
+ *      @node:  Node to dec refcount, NULL is supported to
+ *              simplify writing of callers
+ *
+ */
+void of_node_put(struct device_node *node)
+{
+        if (node)
+                kref_put(&node->kref, of_node_release);
+}
+EXPORT_SYMBOL(of_node_put);
+
+/*
+ * Plug a device node into the tree and global list.
+ */
+void of_attach_node(struct device_node *np)
+{
+        unsigned long flags;
+
+        write_lock_irqsave(&devtree_lock, flags);
+        np->sibling = np->parent->child;
+        np->allnext = allnodes;
+        np->parent->child = np;
+        allnodes = np;
+        write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/*
+ * "Unplug" a node from the device tree.  The caller must hold
+ * a reference to the node.  The memory associated with the node
+ * is not freed until its refcount goes to zero.
+ */
+void of_detach_node(struct device_node *np)
+{
+        struct device_node *parent;
+        unsigned long flags;
+
+        write_lock_irqsave(&devtree_lock, flags);
+
+        parent = np->parent;
+        if (!parent)
+                goto out_unlock;
+
+        if (allnodes == np)
+                allnodes = np->allnext;
+        else {
+                struct device_node *prev;
+                for (prev = allnodes;
+                     prev->allnext != np;
+                     prev = prev->allnext)
+                        ;
+                prev->allnext = np->allnext;
+        }
+
+        if (parent->child == np)
+                parent->child = np->sibling;
+        else {
+                struct device_node *prevsib;
+                for (prevsib = np->parent->child;
+                     prevsib->sibling != np;
+                     prevsib = prevsib->sibling)
+                        ;
+                prevsib->sibling = np->sibling;
+        }
+
+        of_node_set_flag(np, OF_DETACHED);
+
+out_unlock:
+        write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/*
+ * Add a property to a node
+ */
+int prom_add_property(struct device_node *np, struct property *prop)
+{
+        struct property **next;
+        unsigned long flags;
+
+        prop->next = NULL;
+        write_lock_irqsave(&devtree_lock, flags);
+        next = &np->properties;
+        while (*next) {
+                if (strcmp(prop->name, (*next)->name) == 0) {
+                        /* duplicate ! don't insert it */
+                        write_unlock_irqrestore(&devtree_lock, flags);
+                        return -1;
+                }
+                next = &(*next)->next;
+        }
+        *next = prop;
+        write_unlock_irqrestore(&devtree_lock, flags);
+
+#ifdef CONFIG_PROC_DEVICETREE
+        /* try to add to proc as well if it was initialized */
+        if (np->pde)
+                proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+        return 0;
+}
+
+/*
+ * Remove a property from a node.  Note that we don't actually
+ * remove it, since we have given out who-knows-how-many pointers
+ * to the data using get-property.  Instead we just move the property
+ * to the "dead properties" list, so it won't be found any more.
+ */
+int prom_remove_property(struct device_node *np, struct property *prop)
+{
+        struct property **next;
+        unsigned long flags;
+        int found = 0;
+
+        write_lock_irqsave(&devtree_lock, flags);
+        next = &np->properties;
+        while (*next) {
+                if (*next == prop) {
+                        /* found the node */
+                        *next = prop->next;
+                        prop->next = np->deadprops;
+                        np->deadprops = prop;
+                        found = 1;
+                        break;
+                }
+                next = &(*next)->next;
+        }
+        write_unlock_irqrestore(&devtree_lock, flags);
+
+        if (!found)
+                return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+        /* try to remove the proc node as well */
+        if (np->pde)
+                proc_device_tree_remove_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+        return 0;
+}
+
+/*
+ * Update a property in a node.  Note that we don't actually
+ * remove it, since we have given out who-knows-how-many pointers
+ * to the data using get-property.  Instead we just move the property
+ * to the "dead properties" list, and add the new property to the
+ * property list
+ */
+int prom_update_property(struct device_node *np,
+                         struct property *newprop,
+                         struct property *oldprop)
+{
+        struct property **next;
+        unsigned long flags;
+        int found = 0;
+
+        write_lock_irqsave(&devtree_lock, flags);
+        next = &np->properties;
+        while (*next) {
+                if (*next == oldprop) {
+                        /* found the node */
+                        newprop->next = oldprop->next;
+                        *next = newprop;
+                        oldprop->next = np->deadprops;
+                        np->deadprops = oldprop;
+                        found = 1;
+                        break;
+                }
+                next = &(*next)->next;
+        }
+        write_unlock_irqrestore(&devtree_lock, flags);
+
+        if (!found)
+                return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+        /* try to add to proc as well if it was initialized */
+        if (np->pde)
+                proc_device_tree_update_prop(np->pde, newprop, oldprop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+        return 0;
+}
+
+#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
+static struct debugfs_blob_wrapper flat_dt_blob;
+
+static int __init export_flat_device_tree(void)
+{
+        struct dentry *d;
+
+        flat_dt_blob.data = initial_boot_params;
+        flat_dt_blob.size = initial_boot_params->totalsize;
+
+        d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
+                                of_debugfs_root, &flat_dt_blob);
+        if (!d)
+                return 1;
+
+        return 0;
+}
+device_initcall(export_flat_device_tree);
+#endif
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
new file mode 100644
index 000000000000..ae0352ecd5a9
--- /dev/null
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -0,0 +1,1025 @@
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/pci_regs.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/etherdevice.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PRu64   "%llx"
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS       4
+#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+                        (ns) > 0)
+
+static struct of_bus *of_match_bus(struct device_node *np);
+static int __of_address_to_resource(struct device_node *dev,
+                const u32 *addrp, u64 size, unsigned int flags,
+                struct resource *r);
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+        printk(KERN_INFO "%s", s);
+        while (na--)
+                printk(KERN_INFO " %08x", *(addr++));
+        printk(KERN_INFO "\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+        const char      *name;
+        const char      *addresses;
+        int             (*match)(struct device_node *parent);
+        void            (*count_cells)(struct device_node *child,
+                                        int *addrc, int *sizec);
+        u64             (*map)(u32 *addr, const u32 *range,
+                                int na, int ns, int pna);
+        int             (*translate)(u32 *addr, u64 offset, int na);
+        unsigned int    (*get_flags)(const u32 *addr);
+};
+
+/*
+ * Default translator (generic bus)
+ */
+
+static void of_bus_default_count_cells(struct device_node *dev,
+                                        int *addrc, int *sizec)
+{
+        if (addrc)
+                *addrc = of_n_addr_cells(dev);
+        if (sizec)
+                *sizec = of_n_size_cells(dev);
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+                int na, int ns, int pna)
+{
+        u64 cp, s, da;
+
+        cp = of_read_number(range, na);
+        s  = of_read_number(range + na + pna, ns);
+        da = of_read_number(addr, na);
+
+        pr_debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+                cp, s, da);
+
+        if (da < cp || da >= (cp + s))
+                return OF_BAD_ADDR;
+        return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+        u64 a = of_read_number(addr, na);
+        memset(addr, 0, na * 4);
+        a += offset;
+        if (na > 1)
+                addr[na - 2] = a >> 32;
+        addr[na - 1] = a & 0xffffffffu;
+
+        return 0;
+}
+
+static unsigned int of_bus_default_get_flags(const u32 *addr)
+{
+        return IORESOURCE_MEM;
+}
+
+#ifdef CONFIG_PCI
+/*
+ * PCI bus specific translator
+ */
+
+static int of_bus_pci_match(struct device_node *np)
+{
+        /* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */
+        return !strcmp(np->type, "pci") || !strcmp(np->type, "vci");
+}
+
+static void of_bus_pci_count_cells(struct device_node *np,
+                                int *addrc, int *sizec)
+{
+        if (addrc)
+                *addrc = 3;
+        if (sizec)
+                *sizec = 2;
+}
+
+static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+        u64 cp, s, da;
+
+        /* Check address type match */
+        if ((addr[0] ^ range[0]) & 0x03000000)
+                return OF_BAD_ADDR;
+
+        /* Read address values, skipping high cell */
+        cp = of_read_number(range + 1, na - 1);
+        s  = of_read_number(range + na + pna, ns);
+        da = of_read_number(addr + 1, na - 1);
+
+        pr_debug("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+        if (da < cp || da >= (cp + s))
+                return OF_BAD_ADDR;
+        return da - cp;
+}
+
+static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
+{
+        return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+        unsigned int flags = 0;
+        u32 w = addr[0];
+
+        switch ((w >> 24) & 0x03) {
+        case 0x01:
+                flags |= IORESOURCE_IO;
+                break;
+        case 0x02: /* 32 bits */
+        case 0x03: /* 64 bits */
+                flags |= IORESOURCE_MEM;
+                break;
+        }
+        if (w & 0x40000000)
+                flags |= IORESOURCE_PREFETCH;
+        return flags;
+}
+
+const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+                        unsigned int *flags)
+{
+        const u32 *prop;
+        unsigned int psize;
+        struct device_node *parent;
+        struct of_bus *bus;
+        int onesize, i, na, ns;
+
+        /* Get parent & match bus type */
+        parent = of_get_parent(dev);
+        if (parent == NULL)
+                return NULL;
+        bus = of_match_bus(parent);
+        if (strcmp(bus->name, "pci")) {
+                of_node_put(parent);
+                return NULL;
+        }
+        bus->count_cells(dev, &na, &ns);
+        of_node_put(parent);
+        if (!OF_CHECK_COUNTS(na, ns))
+                return NULL;
+
+        /* Get "reg" or "assigned-addresses" property */
+        prop = of_get_property(dev, bus->addresses, &psize);
+        if (prop == NULL)
+                return NULL;
+        psize /= 4;
+
+        onesize = na + ns;
+        for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+                if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+                        if (size)
+                                *size = of_read_number(prop + na, ns);
+                        if (flags)
+                                *flags = bus->get_flags(prop);
+                        return prop;
+                }
+        return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+                                struct resource *r)
+{
+        const u32       *addrp;
+        u64             size;
+        unsigned int    flags;
+
+        addrp = of_get_pci_address(dev, bar, &size, &flags);
+        if (addrp == NULL)
+                return -EINVAL;
+        return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+        return (((pin - 1) + slot) % 4) + 1;
+}
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+        struct device_node *dn, *ppnode;
+        struct pci_dev *ppdev;
+        u32 lspec;
+        u32 laddr[3];
+        u8 pin;
+        int rc;
+
+        /* Check if we have a device node, if yes, fallback to standard OF
+         * parsing
+         */
+        dn = pci_device_to_OF_node(pdev);
+        if (dn)
+                return of_irq_map_one(dn, 0, out_irq);
+
+        /* Ok, we don't, time to have fun. Let's start by building up an
+         * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+         * for PCI. If you do different, then don't use that routine.
+         */
+        rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+        if (rc != 0)
+                return rc;
+        /* No pin, exit */
+        if (pin == 0)
+                return -ENODEV;
+
+        /* Now we walk up the PCI tree */
+        lspec = pin;
+        for (;;) {
+                /* Get the pci_dev of our parent */
+                ppdev = pdev->bus->self;
+
+                /* Ouch, it's a host bridge... */
+                if (ppdev == NULL) {
+                        struct pci_controller *host;
+                        host = pci_bus_to_host(pdev->bus);
+                        ppnode = host ? host->arch_data : NULL;
+                        /* No node for host bridge ? give up */
+                        if (ppnode == NULL)
+                                return -EINVAL;
+                } else
+                        /* We found a P2P bridge, check if it has a node */
+                        ppnode = pci_device_to_OF_node(ppdev);
+
+                /* Ok, we have found a parent with a device-node, hand over to
+                 * the OF parsing code.
+                 * We build a unit address from the linux device to be used for
+                 * resolution. Note that we use the linux bus number which may
+                 * not match your firmware bus numbering.
+                 * Fortunately, in most cases, interrupt-map-mask doesn't
+                 * include the bus number as part of the matching.
+                 * You should still be careful about that though if you intend
+                 * to rely on this function (you ship  a firmware that doesn't
+                 * create device nodes for all PCI devices).
+                 */
+                if (ppnode)
+                        break;
+
+                /* We can only get here if we hit a P2P bridge with no node,
+                 * let's do standard swizzling and try again
+                 */
+                lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+                pdev = ppdev;
+        }
+
+        laddr[0] = (pdev->bus->number << 16)
+                | (pdev->devfn << 8);
+        laddr[1]  = laddr[2] = 0;
+        return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+#endif /* CONFIG_PCI */
+
+/*
+ * ISA bus specific translator
+ */
+
+static int of_bus_isa_match(struct device_node *np)
+{
+        return !strcmp(np->name, "isa");
+}
+
+static void of_bus_isa_count_cells(struct device_node *child,
+                                int *addrc, int *sizec)
+{
+        if (addrc)
+                *addrc = 2;
+        if (sizec)
+                *sizec = 1;
+}
+
+static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+        u64 cp, s, da;
+
+        /* Check address type match */
+        if ((addr[0] ^ range[0]) & 0x00000001)
+                return OF_BAD_ADDR;
+
+        /* Read address values, skipping high cell */
+        cp = of_read_number(range + 1, na - 1);
+        s  = of_read_number(range + na + pna, ns);
+        da = of_read_number(addr + 1, na - 1);
+
+        pr_debug("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+        if (da < cp || da >= (cp + s))
+                return OF_BAD_ADDR;
+        return da - cp;
+}
+
+static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
+{
+        return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_isa_get_flags(const u32 *addr)
+{
+        unsigned int flags = 0;
+        u32 w = addr[0];
+
+        if (w & 1)
+                flags |= IORESOURCE_IO;
+        else
+                flags |= IORESOURCE_MEM;
+        return flags;
+}
+
+/*
+ * Array of bus specific translators
+ */
+
+static struct of_bus of_busses[] = {
+#ifdef CONFIG_PCI
+        /* PCI */
+        {
+                .name = "pci",
+                .addresses = "assigned-addresses",
+                .match = of_bus_pci_match,
+                .count_cells = of_bus_pci_count_cells,
+                .map = of_bus_pci_map,
+                .translate = of_bus_pci_translate,
+                .get_flags = of_bus_pci_get_flags,
+        },
+#endif /* CONFIG_PCI */
+        /* ISA */
+        {
+                .name = "isa",
+                .addresses = "reg",
+                .match = of_bus_isa_match,
+                .count_cells = of_bus_isa_count_cells,
+                .map = of_bus_isa_map,
+                .translate = of_bus_isa_translate,
+                .get_flags = of_bus_isa_get_flags,
+        },
+        /* Default */
+        {
+                .name = "default",
+                .addresses = "reg",
+                .match = NULL,
+                .count_cells = of_bus_default_count_cells,
+                .map = of_bus_default_map,
+                .translate = of_bus_default_translate,
+                .get_flags = of_bus_default_get_flags,
+        },
+};
+
+static struct of_bus *of_match_bus(struct device_node *np)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(of_busses); i++)
+                if (!of_busses[i].match || of_busses[i].match(np))
+                        return &of_busses[i];
+        BUG();
+        return NULL;
+}
+
+static int of_translate_one(struct device_node *parent, struct of_bus *bus,
+                        struct of_bus *pbus, u32 *addr,
+                        int na, int ns, int pna)
+{
+        const u32 *ranges;
+        unsigned int rlen;
+        int rone;
+        u64 offset = OF_BAD_ADDR;
+
+        /* Normally, an absence of a "ranges" property means we are
+         * crossing a non-translatable boundary, and thus the addresses
+         * below the current not cannot be converted to CPU physical ones.
+         * Unfortunately, while this is very clear in the spec, it's not
+         * what Apple understood, and they do have things like /uni-n or
+         * /ht nodes with no "ranges" property and a lot of perfectly
+         * useable mapped devices below them. Thus we treat the absence of
+         * "ranges" as equivalent to an empty "ranges" property which means
+         * a 1:1 translation at that level. It's up to the caller not to try
+         * to translate addresses that aren't supposed to be translated in
+         * the first place. --BenH.
+         */
+        ranges = of_get_property(parent, "ranges", (int *) &rlen);
+        if (ranges == NULL || rlen == 0) {
+                offset = of_read_number(addr, na);
+                memset(addr, 0, pna * 4);
+                pr_debug("OF: no ranges, 1:1 translation\n");
+                goto finish;
+        }
+
+        pr_debug("OF: walking ranges...\n");
+
+        /* Now walk through the ranges */
+        rlen /= 4;
+        rone = na + pna + ns;
+        for (; rlen >= rone; rlen -= rone, ranges += rone) {
+                offset = bus->map(addr, ranges, na, ns, pna);
+                if (offset != OF_BAD_ADDR)
+                        break;
+        }
+        if (offset == OF_BAD_ADDR) {
+                pr_debug("OF: not found !\n");
+                return 1;
+        }
+        memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+        of_dump_addr("OF: parent translation for:", addr, pna);
+        pr_debug("OF: with offset: "PRu64"\n", offset);
+
+        /* Translate it into parent bus space */
+        return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
+{
+        struct device_node *parent = NULL;
+        struct of_bus *bus, *pbus;
+        u32 addr[OF_MAX_ADDR_CELLS];
+        int na, ns, pna, pns;
+        u64 result = OF_BAD_ADDR;
+
+        pr_debug("OF: ** translation for device %s **\n", dev->full_name);
+
+        /* Increase refcount at current level */
+        of_node_get(dev);
+
+        /* Get parent & match bus type */
+        parent = of_get_parent(dev);
+        if (parent == NULL)
+                goto bail;
+        bus = of_match_bus(parent);
+
+        /* Cound address cells & copy address locally */
+        bus->count_cells(dev, &na, &ns);
+        if (!OF_CHECK_COUNTS(na, ns)) {
+                printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+                        dev->full_name);
+                goto bail;
+        }
+        memcpy(addr, in_addr, na * 4);
+
+        pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+                bus->name, na, ns, parent->full_name);
+        of_dump_addr("OF: translating address:", addr, na);
+
+        /* Translate */
+        for (;;) {
+                /* Switch to parent bus */
+                of_node_put(dev);
+                dev = parent;
+                parent = of_get_parent(dev);
+
+                /* If root, we have finished */
+                if (parent == NULL) {
+                        pr_debug("OF: reached root node\n");
+                        result = of_read_number(addr, na);
+                        break;
+                }
+
+                /* Get new parent bus and counts */
+                pbus = of_match_bus(parent);
+                pbus->count_cells(dev, &pna, &pns);
+                if (!OF_CHECK_COUNTS(pna, pns)) {
+                        printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+                                dev->full_name);
+                        break;
+                }
+
+                pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+                        pbus->name, pna, pns, parent->full_name);
+
+                /* Apply bus translation */
+                if (of_translate_one(dev, bus, pbus, addr, na, ns, pna))
+                        break;
+
+                /* Complete the move up one level */
+                na = pna;
+                ns = pns;
+                bus = pbus;
+
+                of_dump_addr("OF: one level translation:", addr, na);
+        }
+ bail:
+        of_node_put(parent);
+        of_node_put(dev);
+
+        return result;
+}
+EXPORT_SYMBOL(of_translate_address);
+
+const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
+                        unsigned int *flags)
+{
+        const u32 *prop;
+        unsigned int psize;
+        struct device_node *parent;
+        struct of_bus *bus;
+        int onesize, i, na, ns;
+
+        /* Get parent & match bus type */
+        parent = of_get_parent(dev);
+        if (parent == NULL)
+                return NULL;
+        bus = of_match_bus(parent);
+        bus->count_cells(dev, &na, &ns);
+        of_node_put(parent);
+        if (!OF_CHECK_COUNTS(na, ns))
+                return NULL;
+
+        /* Get "reg" or "assigned-addresses" property */
+        prop = of_get_property(dev, bus->addresses, (int *) &psize);
+        if (prop == NULL)
+                return NULL;
+        psize /= 4;
+
+        onesize = na + ns;
+        for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+                if (i == index) {
+                        if (size)
+                                *size = of_read_number(prop + na, ns);
+                        if (flags)
+                                *flags = bus->get_flags(prop);
+                        return prop;
+                }
+        return NULL;
+}
+EXPORT_SYMBOL(of_get_address);
+
+static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
+                                u64 size, unsigned int flags,
+                                struct resource *r)
+{
+        u64 taddr;
+
+        if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
+                return -EINVAL;
+        taddr = of_translate_address(dev, addrp);
+        if (taddr == OF_BAD_ADDR)
+                return -EINVAL;
+        memset(r, 0, sizeof(struct resource));
+        if (flags & IORESOURCE_IO) {
+                unsigned long port;
+                port = -1; /* pci_address_to_pio(taddr); */
+                if (port == (unsigned long)-1)
+                        return -EINVAL;
+                r->start = port;
+                r->end = port + size - 1;
+        } else {
+                r->start = taddr;
+                r->end = taddr + size - 1;
+        }
+        r->flags = flags;
+        r->name = dev->name;
+        return 0;
+}
+
+int of_address_to_resource(struct device_node *dev, int index,
+                        struct resource *r)
+{
+        const u32       *addrp;
+        u64             size;
+        unsigned int    flags;
+
+        addrp = of_get_address(dev, index, &size, &flags);
+        if (addrp == NULL)
+                return -EINVAL;
+        return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+                unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+        const u32 *dma_window;
+        u32 cells;
+        const unsigned char *prop;
+
+        dma_window = dma_window_prop;
+
+        /* busno is always one cell */
+        *busno = *(dma_window++);
+
+        prop = of_get_property(dn, "ibm,#dma-address-cells", NULL);
+        if (!prop)
+                prop = of_get_property(dn, "#address-cells", NULL);
+
+        cells = prop ? *(u32 *)prop : of_n_addr_cells(dn);
+        *phys = of_read_number(dma_window, cells);
+
+        dma_window += cells;
+
+        prop = of_get_property(dn, "ibm,#dma-size-cells", NULL);
+        cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
+        *size = of_read_number(dma_window, cells);
+}
+
+/*
+ * Interrupt remapper
+ */
+
+static unsigned int of_irq_workarounds;
+static struct device_node *of_irq_dflt_pic;
+
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+        struct device_node *p;
+        const phandle *parp;
+
+        if (!of_node_get(child))
+                return NULL;
+
+        do {
+                parp = of_get_property(child, "interrupt-parent", NULL);
+                if (parp == NULL)
+                        p = of_get_parent(child);
+                else {
+                        if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+                                p = of_node_get(of_irq_dflt_pic);
+                        else
+                                p = of_find_node_by_phandle(*parp);
+                }
+                of_node_put(child);
+                child = p;
+        } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
+
+        return p;
+}
+
+/* This doesn't need to be called if you don't have any special workaround
+ * flags to pass
+ */
+void of_irq_map_init(unsigned int flags)
+{
+        of_irq_workarounds = flags;
+
+        /* OldWorld, don't bother looking at other things */
+        if (flags & OF_IMAP_OLDWORLD_MAC)
+                return;
+
+        /* If we don't have phandles, let's try to locate a default interrupt
+         * controller (happens when booting with BootX). We do a first match
+         * here, hopefully, that only ever happens on machines with one
+         * controller.
+         */
+        if (flags & OF_IMAP_NO_PHANDLE) {
+                struct device_node *np;
+
+                for (np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
+                        if (of_get_property(np, "interrupt-controller", NULL)
+                                == NULL)
+                                continue;
+                        /* Skip /chosen/interrupt-controller */
+                        if (strcmp(np->name, "chosen") == 0)
+                                continue;
+                        /* It seems like at least one person on this planet
+                         * wants to use BootX on a machine with an AppleKiwi
+                         * controller which happens to pretend to be an
+                         * interrupt controller too.
+                         */
+                        if (strcmp(np->name, "AppleKiwi") == 0)
+                                continue;
+                        /* I think we found one ! */
+                        of_irq_dflt_pic = np;
+                        break;
+                }
+        }
+
+}
+
+int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
+                const u32 *addr, struct of_irq *out_irq)
+{
+        struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+        const u32 *tmp, *imap, *imask;
+        u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+        int imaplen, match, i;
+
+        pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
+                "ointsize=%d\n",
+                parent->full_name, intspec[0], intspec[1], ointsize);
+
+        ipar = of_node_get(parent);
+
+        /* First get the #interrupt-cells property of the current cursor
+         * that tells us how to interpret the passed-in intspec. If there
+         * is none, we are nice and just walk up the tree
+         */
+        do {
+                tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+                if (tmp != NULL) {
+                        intsize = *tmp;
+                        break;
+                }
+                tnode = ipar;
+                ipar = of_irq_find_parent(ipar);
+                of_node_put(tnode);
+        } while (ipar);
+        if (ipar == NULL) {
+                pr_debug(" -> no parent found !\n");
+                goto fail;
+        }
+
+        pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
+                        ipar->full_name, intsize);
+
+        if (ointsize != intsize)
+                return -EINVAL;
+
+        /* Look for this #address-cells. We have to implement the old linux
+         * trick of looking for the parent here as some device-trees rely on it
+         */
+        old = of_node_get(ipar);
+        do {
+                tmp = of_get_property(old, "#address-cells", NULL);
+                tnode = of_get_parent(old);
+                of_node_put(old);
+                old = tnode;
+        } while (old && tmp == NULL);
+        of_node_put(old);
+        old = NULL;
+        addrsize = (tmp == NULL) ? 2 : *tmp;
+
+        pr_debug(" -> addrsize=%d\n", addrsize);
+
+        /* Now start the actual "proper" walk of the interrupt tree */
+        while (ipar != NULL) {
+                /* Now check if cursor is an interrupt-controller and if it is
+                 * then we are done
+                 */
+                if (of_get_property(ipar, "interrupt-controller", NULL) !=
+                                NULL) {
+                        pr_debug(" -> got it !\n");
+                        memcpy(out_irq->specifier, intspec,
+                                intsize * sizeof(u32));
+                        out_irq->size = intsize;
+                        out_irq->controller = ipar;
+                        of_node_put(old);
+                        return 0;
+                }
+
+                /* Now look for an interrupt-map */
+                imap = of_get_property(ipar, "interrupt-map", &imaplen);
+                /* No interrupt map, check for an interrupt parent */
+                if (imap == NULL) {
+                        pr_debug(" -> no map, getting parent\n");
+                        newpar = of_irq_find_parent(ipar);
+                        goto skiplevel;
+                }
+                imaplen /= sizeof(u32);
+
+                /* Look for a mask */
+                imask = of_get_property(ipar, "interrupt-map-mask", NULL);
+
+                /* If we were passed no "reg" property and we attempt to parse
+                 * an interrupt-map, then #address-cells must be 0.
+                 * Fail if it's not.
+                 */
+                if (addr == NULL && addrsize != 0) {
+                        pr_debug(" -> no reg passed in when needed !\n");
+                        goto fail;
+                }
+
+                /* Parse interrupt-map */
+                match = 0;
+                while (imaplen > (addrsize + intsize + 1) && !match) {
+                        /* Compare specifiers */
+                        match = 1;
+                        for (i = 0; i < addrsize && match; ++i) {
+                                u32 mask = imask ? imask[i] : 0xffffffffu;
+                                match = ((addr[i] ^ imap[i]) & mask) == 0;
+                        }
+                        for (; i < (addrsize + intsize) && match; ++i) {
+                                u32 mask = imask ? imask[i] : 0xffffffffu;
+                                match =
+                                        ((intspec[i-addrsize] ^ imap[i])
+                                                & mask) == 0;
+                        }
+                        imap += addrsize + intsize;
+                        imaplen -= addrsize + intsize;
+
+                        pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+                        /* Get the interrupt parent */
+                        if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+                                newpar = of_node_get(of_irq_dflt_pic);
+                        else
+                                newpar =
+                                        of_find_node_by_phandle((phandle)*imap);
+                        imap++;
+                        --imaplen;
+
+                        /* Check if not found */
+                        if (newpar == NULL) {
+                                pr_debug(" -> imap parent not found !\n");
+                                goto fail;
+                        }
+
+                        /* Get #interrupt-cells and #address-cells of new
+                         * parent
+                         */
+                        tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+                        if (tmp == NULL) {
+                                pr_debug(" -> parent lacks "
+                                                "#interrupt-cells!\n");
+                                goto fail;
+                        }
+                        newintsize = *tmp;
+                        tmp = of_get_property(newpar, "#address-cells", NULL);
+                        newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+                        pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
+                                newintsize, newaddrsize);
+
+                        /* Check for malformed properties */
+                        if (imaplen < (newaddrsize + newintsize))
+                                goto fail;
+
+                        imap += newaddrsize + newintsize;
+                        imaplen -= newaddrsize + newintsize;
+
+                        pr_debug(" -> imaplen=%d\n", imaplen);
+                }
+                if (!match)
+                        goto fail;
+
+                of_node_put(old);
+                old = of_node_get(newpar);
+                addrsize = newaddrsize;
+                intsize = newintsize;
+                intspec = imap - intsize;
+                addr = intspec - addrsize;
+
+skiplevel:
+                /* Iterate again with new parent */
+                pr_debug(" -> new parent: %s\n",
+                                newpar ? newpar->full_name : "<>");
+                of_node_put(ipar);
+                ipar = newpar;
+                newpar = NULL;
+        }
+fail:
+        of_node_put(ipar);
+        of_node_put(old);
+        of_node_put(newpar);
+
+        return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+int of_irq_map_one(struct device_node *device,
+                        int index, struct of_irq *out_irq)
+{
+        struct device_node *p;
+        const u32 *intspec, *tmp, *addr;
+        u32 intsize, intlen;
+        int res;
+
+        pr_debug("of_irq_map_one: dev=%s, index=%d\n",
+                        device->full_name, index);
+
+        /* Get the interrupts property */
+        intspec = of_get_property(device, "interrupts", (int *) &intlen);
+        if (intspec == NULL)
+                return -EINVAL;
+        intlen /= sizeof(u32);
+
+        pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen);
+
+        /* Get the reg property (if any) */
+        addr = of_get_property(device, "reg", NULL);
+
+        /* Look for the interrupt parent. */
+        p = of_irq_find_parent(device);
+        if (p == NULL)
+                return -EINVAL;
+
+        /* Get size of interrupt specifier */
+        tmp = of_get_property(p, "#interrupt-cells", NULL);
+        if (tmp == NULL) {
+                of_node_put(p);
+                return -EINVAL;
+        }
+        intsize = *tmp;
+
+        pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
+
+        /* Check index */
+        if ((index + 1) * intsize > intlen)
+                return -EINVAL;
+
+        /* Get new specifier and map it */
+        res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+                                addr, out_irq);
+        of_node_put(p);
+        return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+/**
+ * Search the device tree for the best MAC address to use.  'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address.  If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot.  For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
+{
+        struct property *pp;
+
+        pp = of_find_property(np, "mac-address", NULL);
+        if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+                return pp->value;
+
+        pp = of_find_property(np, "local-mac-address", NULL);
+        if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+                return pp->value;
+
+        pp = of_find_property(np, "address", NULL);
+        if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+                return pp->value;
+
+        return NULL;
+}
+EXPORT_SYMBOL(of_get_mac_address);
+
+int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
+{
+        struct of_irq out_irq;
+        int irq;
+        int res;
+
+        res = of_irq_map_one(dev, index, &out_irq);
+
+        /* Get irq for the device */
+        if (res) {
+                pr_debug("IRQ not found... code = %d", res);
+                return NO_IRQ;
+        }
+        /* Assuming single interrupt controller... */
+        irq = out_irq.specifier[0];
+
+        pr_debug("IRQ found = %d", irq);
+
+        /* Only dereference the resource if both the
+         * resource and the irq are valid. */
+        if (r && irq != NO_IRQ) {
+                r->start = r->end = irq;
+                r->flags = IORESOURCE_IRQ;
+        }
+
+        return irq;
+}
+EXPORT_SYMBOL_GPL(of_irq_to_resource);
+
+void __iomem *of_iomap(struct device_node *np, int index)
+{
+        struct resource res;
+
+        if (of_address_to_resource(np, index, &res))
+                return NULL;
+
+        return ioremap(res.start, 1 + res.end - res.start);
+}
+EXPORT_SYMBOL(of_iomap);
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
new file mode 100644
index 000000000000..3171e39e3220
--- /dev/null
+++ b/arch/microblaze/kernel/ptrace.c
@@ -0,0 +1,182 @@
+/*
+ * `ptrace' system call
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2004-2007 John Williams <john.williams@petalogix.com>
+ *
+ * derived from arch/v850/kernel/ptrace.c
+ *
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
+ *
+ * Derived from arch/mips/kernel/ptrace.c:
+ *
+ * Copyright (C) 1992 Ross Biro
+ * Copyright (C) Linus Torvalds
+ * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/asm-offsets.h>
+
+/* Returns the address where the register at REG_OFFS in P is stashed away. */
+static microblaze_reg_t *reg_save_addr(unsigned reg_offs,
+                                        struct task_struct *t)
+{
+        struct pt_regs *regs;
+
+        /*
+         * Three basic cases:
+         *
+         * (1)  A register normally saved before calling the scheduler, is
+         *      available in the kernel entry pt_regs structure at the top
+         *      of the kernel stack. The kernel trap/irq exit path takes
+         *      care to save/restore almost all registers for ptrace'd
+         *      processes.
+         *
+         * (2)  A call-clobbered register, where the process P entered the
+         *      kernel via [syscall] trap, is not stored anywhere; that's
+         *      OK, because such registers are not expected to be preserved
+         *      when the trap returns anyway (so we don't actually bother to
+         *      test for this case).
+         *
+         * (3)  A few registers not used at all by the kernel, and so
+         *      normally never saved except by context-switches, are in the
+         *      context switch state.
+         */
+
+        /* Register saved during kernel entry (or not available). */
+        regs = task_pt_regs(t);
+
+        return (microblaze_reg_t *)((char *)regs + reg_offs);
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+        int rval;
+        unsigned long val = 0;
+        unsigned long copied;
+
+        switch (request) {
+        case PTRACE_PEEKTEXT: /* read word at location addr. */
+        case PTRACE_PEEKDATA:
+                pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr);
+                copied = access_process_vm(child, addr, &val, sizeof(val), 0);
+                rval = -EIO;
+                if (copied != sizeof(val))
+                        break;
+                rval = put_user(val, (unsigned long *)data);
+                break;
+
+        case PTRACE_POKETEXT: /* write the word at location addr. */
+        case PTRACE_POKEDATA:
+                pr_debug("POKETEXT/POKEDATA to %08lX\n", addr);
+                rval = 0;
+                if (access_process_vm(child, addr, &data, sizeof(data), 1)
+                    == sizeof(data))
+                        break;
+                rval = -EIO;
+                break;
+
+        /* Read/write the word at location ADDR in the registers. */
+        case PTRACE_PEEKUSR:
+        case PTRACE_POKEUSR:
+                pr_debug("PEEKUSR/POKEUSR : 0x%08lx\n", addr);
+                rval = 0;
+                if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
+                        /*
+                         * Special requests that don't actually correspond
+                         * to offsets in struct pt_regs.
+                         */
+                        if (addr == PT_TEXT_ADDR) {
+                                val = child->mm->start_code;
+                        } else if (addr == PT_DATA_ADDR) {
+                                val = child->mm->start_data;
+                        } else if (addr == PT_TEXT_LEN) {
+                                val = child->mm->end_code
+                                        - child->mm->start_code;
+                        } else {
+                                rval = -EIO;
+                        }
+                } else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
+                        microblaze_reg_t *reg_addr = reg_save_addr(addr, child);
+                        if (request == PTRACE_PEEKUSR)
+                                val = *reg_addr;
+                        else
+                                *reg_addr = data;
+                } else
+                        rval = -EIO;
+
+                if (rval == 0 && request == PTRACE_PEEKUSR)
+                        rval = put_user(val, (unsigned long *)data);
+                break;
+        /* Continue and stop at next (return from) syscall */
+        case PTRACE_SYSCALL:
+                pr_debug("PTRACE_SYSCALL\n");
+        case PTRACE_SINGLESTEP:
+                pr_debug("PTRACE_SINGLESTEP\n");
+        /* Restart after a signal.  */
+        case PTRACE_CONT:
+                pr_debug("PTRACE_CONT\n");
+                rval = -EIO;
+                if (!valid_signal(data))
+                        break;
+
+                if (request == PTRACE_SYSCALL)
+                        set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+                else
+                        clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+                child->exit_code = data;
+                pr_debug("wakeup_process\n");
+                wake_up_process(child);
+                rval = 0;
+                break;
+
+        /*
+         * make the child exit.  Best I can do is send it a sigkill.
+         * perhaps it should be put in the status that it wants to
+         * exit.
+         */
+        case PTRACE_KILL:
+                pr_debug("PTRACE_KILL\n");
+                rval = 0;
+                if (child->exit_state == EXIT_ZOMBIE)   /* already dead */
+                        break;
+                child->exit_code = SIGKILL;
+                wake_up_process(child);
+                break;
+
+        case PTRACE_DETACH: /* detach a process that was attached. */
+                pr_debug("PTRACE_DETACH\n");
+                rval = ptrace_detach(child, data);
+                break;
+        default:
+                /* rval = ptrace_request(child, request, addr, data); noMMU */
+                rval = -EIO;
+        }
+        return rval;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+        /* nothing to do */
+}
diff --git a/arch/microblaze/kernel/selfmod.c b/arch/microblaze/kernel/selfmod.c
new file mode 100644
index 000000000000..89508bdc9f3c
--- /dev/null
+++ b/arch/microblaze/kernel/selfmod.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <asm/selfmod.h>
+
+#undef DEBUG
+
+#if __GNUC__ > 3
+#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig.
+#endif
+
+#define OPCODE_IMM              0xB0000000
+#define OPCODE_LWI              0xE8000000
+#define OPCODE_LWI_MASK         0xEC000000
+#define OPCODE_RTSD             0xB60F0008 /* return from func: rtsd r15, 8 */
+#define OPCODE_ADDIK            0x30000000
+#define OPCODE_ADDIK_MASK       0xFC000000
+
+#define IMM_BASE        (OPCODE_IMM | (BARRIER_BASE_ADDR >> 16))
+#define LWI_BASE        (OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00))
+#define LWI_BASE_MASK   (OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00))
+#define ADDIK_BASE      (OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00))
+#define ADDIK_BASE_MASK (OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00))
+
+#define MODIFY_INSTR {                                          \
+        pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n",          \
+                __func__, i, addr[i], i + 1, addr[i + 1]);              \
+        addr[i] = OPCODE_IMM + (base >> 16);                            \
+        /* keep instruction opcode and add only last 16bits */          \
+        addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff);     \
+        __invalidate_icache(addr[i]);                                   \
+        __invalidate_icache(addr[i + 1]);                               \
+        pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n",          \
+                __func__, i, addr[i], i + 1, addr[i + 1]); }
+
+/* NOTE
+ * self-modified part of code for improvement of interrupt controller
+ * save instruction in interrupt rutine
+ */
+void selfmod_function(const int *arr_fce, const unsigned int base)
+{
+        unsigned int flags, i, j, *addr = NULL;
+
+        local_irq_save(flags);
+        __disable_icache();
+
+        /* zero terminated array */
+        for (j = 0; arr_fce[j] != 0; j++) {
+                /* get start address of function */
+                addr = (unsigned int *) arr_fce[j];
+                pr_debug("%s: func(%d) at 0x%x\n",
+                                        __func__, j, (unsigned int) addr);
+                for (i = 0; ; i++) {
+                        pr_debug("%s: instruction code at %d: 0x%x\n",
+                                                __func__, i, addr[i]);
+                        if (addr[i] == IMM_BASE) {
+                                /* detecting of lwi (0xE8) or swi (0xF8) instr
+                                 * I can detect both opcode with one mask */
+                                if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) {
+                                        MODIFY_INSTR;
+                                } else /* detection addik for ack */
+                                if ((addr[i + 1] & ADDIK_BASE_MASK) ==
+                                                                ADDIK_BASE) {
+                                        MODIFY_INSTR;
+                                }
+                        } else if (addr[i] == OPCODE_RTSD) {
+                                /* return from function means end of function */
+                                pr_debug("%s: end of array %d\n", __func__, i);
+                                break;
+                        }
+                }
+        }
+        local_irq_restore(flags);
+} /* end of self-modified code */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
new file mode 100644
index 000000000000..eb6b41758e23
--- /dev/null
+++ b/arch/microblaze/kernel/setup.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/debugfs.h>
+
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/page.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+#include <linux/param.h>
+#include <linux/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/entry.h>
+#include <asm/cpuinfo.h>
+
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/pgtable.h>
+
+DEFINE_PER_CPU(unsigned int, KSP);      /* Saved kernel stack pointer */
+DEFINE_PER_CPU(unsigned int, KM);       /* Kernel/user mode */
+DEFINE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DEFINE_PER_CPU(unsigned int, CURRENT_SAVE);     /* Saved current pointer */
+
+unsigned int boot_cpuid;
+char cmd_line[COMMAND_LINE_SIZE];
+
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_CMDLINE_FORCE
+        strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+        strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif
+        *cmdline_p = cmd_line;
+
+        console_verbose();
+
+        unflatten_device_tree();
+
+        /* NOTE I think that this function is not necessary to call */
+        /* irq_early_init(); */
+        setup_cpuinfo();
+
+        __invalidate_icache_all();
+        __enable_icache();
+
+        __invalidate_dcache_all();
+        __enable_dcache();
+
+        panic_timeout = 120;
+
+        setup_memory();
+
+#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
+        printk(KERN_NOTICE "Self modified code enable\n");
+#endif
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_XILINX_CONSOLE)
+        conswitchp = &xil_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+        conswitchp = &dummy_con;
+#endif
+#endif
+}
+
+#ifdef CONFIG_MTD_UCLINUX
+/* Handle both romfs and cramfs types, without generating unnecessary
+ code (ie no point checking for CRAMFS if it's not even enabled) */
+inline unsigned get_romfs_len(unsigned *addr)
+{
+#ifdef CONFIG_ROMFS_FS
+        if (memcmp(&addr[0], "-rom1fs-", 8) == 0) /* romfs */
+                return be32_to_cpu(addr[2]);
+#endif
+
+#ifdef CONFIG_CRAMFS
+        if (addr[0] == le32_to_cpu(0x28cd3d45)) /* cramfs */
+                return le32_to_cpu(addr[1]);
+#endif
+        return 0;
+}
+#endif  /* CONFIG_MTD_UCLINUX_EBSS */
+
+void __init machine_early_init(const char *cmdline, unsigned int ram,
+                unsigned int fdt)
+{
+        unsigned long *src, *dst = (unsigned long *)0x0;
+
+/* clearing bss section */
+        memset(__bss_start, 0, __bss_stop-__bss_start);
+        memset(_ssbss, 0, _esbss-_ssbss);
+
+        /*
+         * Copy command line passed from bootloader, or use default
+         * if none provided, or forced
+         */
+#ifndef CONFIG_CMDLINE_BOOL
+        if (cmdline && cmdline[0] != '\0')
+                strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
+#endif
+
+/* initialize device tree for usage in early_printk */
+        early_init_devtree((void *)_fdt_start);
+
+#ifdef CONFIG_EARLY_PRINTK
+        setup_early_printk(NULL);
+#endif
+
+        early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
+        printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+
+#ifdef CONFIG_MTD_UCLINUX
+        {
+                int size;
+                unsigned int romfs_base;
+                romfs_base = (ram ? ram : (unsigned int)&__init_end);
+                /* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the
+                 * end of kernel, which is ROMFS_LOCATION defined above. */
+                size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+                early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+                                romfs_base, size);
+                early_printk("#### klimit %p ####\n", klimit);
+                BUG_ON(size < 0); /* What else can we do? */
+
+                /* Use memmove to handle likely case of memory overlap */
+                early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n",
+                        size, romfs_base, (unsigned)&_ebss);
+                memmove(&_ebss, (int *)romfs_base, size);
+
+                /* update klimit */
+                klimit += PAGE_ALIGN(size);
+                early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
+        }
+#endif
+
+        for (src = __ivt_start; src < __ivt_end; src++, dst++)
+                *dst = *src;
+
+        /* Initialize global data */
+        per_cpu(KM, 0) = 0x1;   /* We start in kernel mode */
+        per_cpu(CURRENT_SAVE, 0) = (unsigned long)current;
+}
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *of_debugfs_root;
+
+static int microblaze_debugfs_init(void)
+{
+        of_debugfs_root = debugfs_create_dir("microblaze", NULL);
+
+        return of_debugfs_root == NULL;
+}
+arch_initcall(microblaze_debugfs_init);
+#endif
+
+void machine_restart(char *cmd)
+{
+        printk(KERN_NOTICE "Machine restart...\n");
+        dump_stack();
+        while (1)
+                ;
+}
+
+void machine_shutdown(void)
+{
+        printk(KERN_NOTICE "Machine shutdown...\n");
+        while (1)
+                ;
+}
+
+void machine_halt(void)
+{
+        printk(KERN_NOTICE "Machine halt...\n");
+        while (1)
+                ;
+}
+
+void machine_power_off(void)
+{
+        printk(KERN_NOTICE "Machine power off...\n");
+        while (1)
+                ;
+}
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
new file mode 100644
index 000000000000..ff347b98863a
--- /dev/null
+++ b/arch/microblaze/kernel/signal.c
@@ -0,0 +1,538 @@
+/*
+ * Signal handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003,2004 John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001 NEC Corporation
+ * Copyright (C) 2001 Miles Bader <miles@gnu.org>
+ * Copyright (C) 1999,2000 Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 1991,1992 Linus Torvalds
+ *
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
+ *
+ * This file was was derived from the sh version, arch/sh/kernel/signal.c
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/percpu.h>
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int
+sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
+{
+        sigset_t saveset;
+
+        mask &= _BLOCKABLE;
+        spin_lock_irq(&current->sighand->siglock);
+        saveset = current->blocked;
+        siginitset(&current->blocked, mask);
+        recalc_sigpending();
+        spin_unlock_irq(&current->sighand->siglock);
+
+        regs->r3 = -EINTR;
+        while (1) {
+                current->state = TASK_INTERRUPTIBLE;
+                schedule();
+                if (do_signal(regs, &saveset, 1))
+                        return -EINTR;
+        }
+}
+
+asmlinkage int
+sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
+                struct pt_regs *regs)
+{
+        sigset_t saveset, newset;
+
+        /* XXX: Don't preclude handling different sized sigset_t's. */
+        if (sigsetsize != sizeof(sigset_t))
+                return -EINVAL;
+
+        if (copy_from_user(&newset, unewset, sizeof(newset)))
+                return -EFAULT;
+        sigdelsetmask(&newset, ~_BLOCKABLE);
+        spin_lock_irq(&current->sighand->siglock);
+        saveset = current->blocked;
+        current->blocked = newset;
+        recalc_sigpending();
+        spin_unlock_irq(&current->sighand->siglock);
+
+        regs->r3 = -EINTR;
+        while (1) {
+                current->state = TASK_INTERRUPTIBLE;
+                schedule();
+                if (do_signal(regs, &saveset, 1))
+                        return -EINTR;
+        }
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction *act,
+                struct old_sigaction *oact)
+{
+        struct k_sigaction new_ka, old_ka;
+        int ret;
+
+        if (act) {
+                old_sigset_t mask;
+                if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+                        __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+                        __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+                        return -EFAULT;
+                __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+                __get_user(mask, &act->sa_mask);
+                siginitset(&new_ka.sa.sa_mask, mask);
+        }
+
+        ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+        if (!ret && oact) {
+                if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+                        __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+                        __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+                        return -EFAULT;
+                __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+                __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+        }
+
+        return ret;
+}
+
+asmlinkage int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+                struct pt_regs *regs)
+{
+        return do_sigaltstack(uss, uoss, regs->r1);
+}
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct sigframe {
+        struct sigcontext sc;
+        unsigned long extramask[_NSIG_WORDS-1];
+        unsigned long tramp[2]; /* signal trampoline */
+};
+
+struct rt_sigframe {
+        struct siginfo info;
+        struct ucontext uc;
+        unsigned long tramp[2]; /* signal trampoline */
+};
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
+{
+        unsigned int err = 0;
+
+#define COPY(x)         {err |= __get_user(regs->x, &sc->regs.x); }
+        COPY(r0);
+        COPY(r1);
+        COPY(r2);       COPY(r3);       COPY(r4);       COPY(r5);
+        COPY(r6);       COPY(r7);       COPY(r8);       COPY(r9);
+        COPY(r10);      COPY(r11);      COPY(r12);      COPY(r13);
+        COPY(r14);      COPY(r15);      COPY(r16);      COPY(r17);
+        COPY(r18);      COPY(r19);      COPY(r20);      COPY(r21);
+        COPY(r22);      COPY(r23);      COPY(r24);      COPY(r25);
+        COPY(r26);      COPY(r27);      COPY(r28);      COPY(r29);
+        COPY(r30);      COPY(r31);
+        COPY(pc);       COPY(ear);      COPY(esr);      COPY(fsr);
+#undef COPY
+
+        *rval_p = regs->r3;
+
+        return err;
+}
+
+asmlinkage int sys_sigreturn(struct pt_regs *regs)
+{
+        struct sigframe *frame = (struct sigframe *)regs->r1;
+        sigset_t set;
+        int rval;
+
+        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+                goto badframe;
+
+        if (__get_user(set.sig[0], &frame->sc.oldmask)
+                || (_NSIG_WORDS > 1
+                && __copy_from_user(&set.sig[1], &frame->extramask,
+                                        sizeof(frame->extramask))))
+                goto badframe;
+
+        sigdelsetmask(&set, ~_BLOCKABLE);
+
+        spin_lock_irq(&current->sighand->siglock);
+        current->blocked = set;
+        recalc_sigpending();
+        spin_unlock_irq(&current->sighand->siglock);
+
+        if (restore_sigcontext(regs, &frame->sc, &rval))
+                goto badframe;
+        return rval;
+
+badframe:
+        force_sig(SIGSEGV, current);
+        return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+{
+        struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1;
+        sigset_t set;
+        stack_t st;
+        int rval;
+
+        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+                goto badframe;
+
+        if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+                goto badframe;
+
+        sigdelsetmask(&set, ~_BLOCKABLE);
+        spin_lock_irq(&current->sighand->siglock);
+        current->blocked = set;
+        recalc_sigpending();
+        spin_unlock_irq(&current->sighand->siglock);
+
+        if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
+                goto badframe;
+
+        if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st)))
+                goto badframe;
+        /* It is more difficult to avoid calling this function than to
+         call it and ignore errors. */
+        do_sigaltstack(&st, NULL, regs->r1);
+
+        return rval;
+
+badframe:
+        force_sig(SIGSEGV, current);
+        return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
+                unsigned long mask)
+{
+        int err = 0;
+
+#define COPY(x)         {err |= __put_user(regs->x, &sc->regs.x); }
+        COPY(r0);
+        COPY(r1);
+        COPY(r2);       COPY(r3);       COPY(r4);       COPY(r5);
+        COPY(r6);       COPY(r7);       COPY(r8);       COPY(r9);
+        COPY(r10);      COPY(r11);      COPY(r12);      COPY(r13);
+        COPY(r14);      COPY(r15);      COPY(r16);      COPY(r17);
+        COPY(r18);      COPY(r19);      COPY(r20);      COPY(r21);
+        COPY(r22);      COPY(r23);      COPY(r24);      COPY(r25);
+        COPY(r26);      COPY(r27);      COPY(r28);      COPY(r29);
+        COPY(r30);      COPY(r31);
+        COPY(pc);       COPY(ear);      COPY(esr);      COPY(fsr);
+#undef COPY
+
+        err |= __put_user(mask, &sc->oldmask);
+
+        return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void *
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
+{
+        /* Default to using normal stack */
+        unsigned long sp = regs->r1;
+
+        if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
+                sp = current->sas_ss_sp + current->sas_ss_size;
+
+        return (void *)((sp - frame_size) & -8UL);
+}
+
+static void setup_frame(int sig, struct k_sigaction *ka,
+                        sigset_t *set, struct pt_regs *regs)
+{
+        struct sigframe *frame;
+        int err = 0;
+        int signal;
+
+        frame = get_sigframe(ka, regs, sizeof(*frame));
+
+        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+                goto give_sigsegv;
+
+        signal = current_thread_info()->exec_domain
+                && current_thread_info()->exec_domain->signal_invmap
+                && sig < 32
+                ? current_thread_info()->exec_domain->signal_invmap[sig]
+                : sig;
+
+        err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+        if (_NSIG_WORDS > 1) {
+                err |= __copy_to_user(frame->extramask, &set->sig[1],
+                                        sizeof(frame->extramask));
+        }
+
+        /* Set up to return from userspace. If provided, use a stub
+         already in userspace. */
+        /* minus 8 is offset to cater for "rtsd r15,8" offset */
+        if (ka->sa.sa_flags & SA_RESTORER) {
+                regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
+        } else {
+                /* Note, these encodings are _big endian_! */
+
+                /* addi r12, r0, __NR_sigreturn */
+                err |= __put_user(0x31800000 | __NR_sigreturn ,
+                                frame->tramp + 0);
+                /* brki r14, 0x8 */
+                err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+                /* Return from sighandler will jump to the tramp.
+                 Negative 8 offset because return is rtsd r15, 8 */
+                regs->r15 = ((unsigned long)frame->tramp)-8;
+
+                __invalidate_cache_sigtramp((unsigned long)frame->tramp);
+        }
+
+        if (err)
+                goto give_sigsegv;
+
+        /* Set up registers for signal handler */
+        regs->r1 = (unsigned long) frame;
+        /* Signal handler args: */
+        regs->r5 = signal; /* Arg 0: signum */
+        regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
+
+        /* Offset of 4 to handle microblaze rtid r14, 0 */
+        regs->pc = (unsigned long)ka->sa.sa_handler;
+
+        set_fs(USER_DS);
+
+#ifdef DEBUG_SIG
+        printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
+                current->comm, current->pid, frame, regs->pc);
+#endif
+
+        return;
+
+give_sigsegv:
+        if (sig == SIGSEGV)
+                ka->sa.sa_handler = SIG_DFL;
+        force_sig(SIGSEGV, current);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+                        sigset_t *set, struct pt_regs *regs)
+{
+        struct rt_sigframe *frame;
+        int err = 0;
+        int signal;
+
+        frame = get_sigframe(ka, regs, sizeof(*frame));
+
+        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+                goto give_sigsegv;
+
+        signal = current_thread_info()->exec_domain
+                && current_thread_info()->exec_domain->signal_invmap
+                && sig < 32
+                ? current_thread_info()->exec_domain->signal_invmap[sig]
+                : sig;
+
+        err |= copy_siginfo_to_user(&frame->info, info);
+
+        /* Create the ucontext. */
+        err |= __put_user(0, &frame->uc.uc_flags);
+        err |= __put_user(0, &frame->uc.uc_link);
+        err |= __put_user((void *)current->sas_ss_sp,
+                        &frame->uc.uc_stack.ss_sp);
+        err |= __put_user(sas_ss_flags(regs->r1),
+                        &frame->uc.uc_stack.ss_flags);
+        err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+        err |= setup_sigcontext(&frame->uc.uc_mcontext,
+                        regs, set->sig[0]);
+        err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+        /* Set up to return from userspace. If provided, use a stub
+         already in userspace. */
+        /* minus 8 is offset to cater for "rtsd r15,8" */
+        if (ka->sa.sa_flags & SA_RESTORER) {
+                regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
+        } else {
+                /* addi r12, r0, __NR_sigreturn */
+                err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+                                frame->tramp + 0);
+                /* brki r14, 0x8 */
+                err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+                /* Return from sighandler will jump to the tramp.
+                 Negative 8 offset because return is rtsd r15, 8 */
+                regs->r15 = ((unsigned long)frame->tramp)-8;
+
+                __invalidate_cache_sigtramp((unsigned long)frame->tramp);
+        }
+
+        if (err)
+                goto give_sigsegv;
+
+        /* Set up registers for signal handler */
+        regs->r1 = (unsigned long) frame;
+        /* Signal handler args: */
+        regs->r5 = signal; /* arg 0: signum */
+        regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
+        regs->r7 = (unsigned long) &frame->uc; /* arg2: ucontext */
+        /* Offset to handle microblaze rtid r14, 0 */
+        regs->pc = (unsigned long)ka->sa.sa_handler;
+
+        set_fs(USER_DS);
+
+#ifdef DEBUG_SIG
+        printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
+                current->comm, current->pid, frame, regs->pc);
+#endif
+
+        return;
+
+give_sigsegv:
+        if (sig == SIGSEGV)
+                ka->sa.sa_handler = SIG_DFL;
+        force_sig(SIGSEGV, current);
+}
+
+/* Handle restarting system calls */
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+        switch (regs->r3) {
+        case -ERESTART_RESTARTBLOCK:
+        case -ERESTARTNOHAND:
+                if (!has_handler)
+                        goto do_restart;
+                regs->r3 = -EINTR;
+                break;
+        case -ERESTARTSYS:
+                if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+                        regs->r3 = -EINTR;
+                        break;
+        }
+        /* fallthrough */
+        case -ERESTARTNOINTR:
+do_restart:
+                /* offset of 4 bytes to re-execute trap (brki) instruction */
+                regs->pc -= 4;
+                break;
+        }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(unsigned long sig, struct k_sigaction *ka,
+                siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
+{
+        /* Set up the stack frame */
+        if (ka->sa.sa_flags & SA_SIGINFO)
+                setup_rt_frame(sig, ka, info, oldset, regs);
+        else
+                setup_frame(sig, ka, oldset, regs);
+
+        if (ka->sa.sa_flags & SA_ONESHOT)
+                ka->sa.sa_handler = SIG_DFL;
+
+        if (!(ka->sa.sa_flags & SA_NODEFER)) {
+                spin_lock_irq(&current->sighand->siglock);
+                sigorsets(&current->blocked,
+                                &current->blocked, &ka->sa.sa_mask);
+                sigaddset(&current->blocked, sig);
+                recalc_sigpending();
+                spin_unlock_irq(&current->sighand->siglock);
+        }
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
+{
+        siginfo_t info;
+        int signr;
+        struct k_sigaction ka;
+#ifdef DEBUG_SIG
+        printk(KERN_INFO "do signal: %p %p %d\n", regs, oldset, in_syscall);
+        printk(KERN_INFO "do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1,
+                        regs->r12, current_thread_info()->flags);
+#endif
+        /*
+         * We want the common case to go fast, which
+         * is why we may in certain cases get here from
+         * kernel mode. Just return without doing anything
+         * if so.
+         */
+        if (kernel_mode(regs))
+                return 1;
+
+        if (!oldset)
+                oldset = &current->blocked;
+
+        signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+        if (signr > 0) {
+                /* Whee! Actually deliver the signal. */
+                if (in_syscall)
+                        handle_restart(regs, &ka, 1);
+                handle_signal(signr, &ka, &info, oldset, regs);
+                return 1;
+        }
+
+        if (in_syscall)
+                handle_restart(regs, NULL, 0);
+
+        /* Did we come from a system call? */
+        return 0;
+}
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
new file mode 100644
index 000000000000..d90b548fb1bb
--- /dev/null
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *      Yasushi SHOJI <yashi@atmark-techno.com>
+ *      Tetsuya OHKAWA <tetsuya@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/syscalls.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/sys.h>
+#include <linux/ipc.h>
+#include <linux/utsname.h>
+#include <linux/file.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/ipc.h>
+#include <linux/semaphore.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly. This will be remove with new toolchain.
+ */
+asmlinkage int
+sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
+{
+        int version, ret;
+
+        version = call >> 16; /* hack for backward compatibility */
+        call &= 0xffff;
+
+        ret = -EINVAL;
+        switch (call) {
+        case SEMOP:
+                ret = sys_semop(first, (struct sembuf *)ptr, second);
+                break;
+        case SEMGET:
+                ret = sys_semget(first, second, third);
+                break;
+        case SEMCTL:
+        {
+                union semun fourth;
+
+                if (!ptr)
+                        break;
+                ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
+                                || (get_user(fourth.__pad, (void **)ptr)) ;
+                if (ret)
+                        break;
+                ret = sys_semctl(first, second, third, fourth);
+                break;
+        }
+        case MSGSND:
+                ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
+                break;
+        case MSGRCV:
+                switch (version) {
+                case 0: {
+                        struct ipc_kludge tmp;
+
+                        if (!ptr)
+                                break;
+                        ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
+                                ? 0 : -EFAULT) || copy_from_user(&tmp,
+                                (struct ipc_kludge *) ptr, sizeof(tmp));
+                        if (ret)
+                                break;
+                        ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
+                                        third);
+                        break;
+                        }
+                default:
+                        ret = sys_msgrcv(first, (struct msgbuf *) ptr,
+                                        second, fifth, third);
+                        break;
+                }
+                break;
+        case MSGGET:
+                ret = sys_msgget((key_t) first, second);
+                break;
+        case MSGCTL:
+                ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
+                break;
+        case SHMAT:
+                switch (version) {
+                default: {
+                        ulong raddr;
+                        ret = access_ok(VERIFY_WRITE, (ulong *) third,
+                                        sizeof(ulong)) ? 0 : -EFAULT;
+                        if (ret)
+                                break;
+                        ret = do_shmat(first, (char *) ptr, second, &raddr);
+                        if (ret)
+                                break;
+                        ret = put_user(raddr, (ulong *) third);
+                        break;
+                        }
+                case 1: /* iBCS2 emulator entry point */
+                        if (!segment_eq(get_fs(), get_ds()))
+                                break;
+                        ret = do_shmat(first, (char *) ptr, second,
+                                        (ulong *) third);
+                        break;
+                }
+                break;
+        case SHMDT:
+                ret = sys_shmdt((char *)ptr);
+                break;
+        case SHMGET:
+                ret = sys_shmget(first, second, third);
+                break;
+        case SHMCTL:
+                ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
+                break;
+        }
+        return -EINVAL;
+}
+
+asmlinkage int sys_vfork(struct pt_regs *regs)
+{
+        return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
+                                                regs, 0, NULL, NULL);
+}
+
+asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+{
+        if (!stack)
+                stack = regs->r1;
+        return do_fork(flags, stack, regs, 0, NULL, NULL);
+}
+
+asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+                        char __user *__user *envp, struct pt_regs *regs)
+{
+        int error;
+        char *filename;
+
+        filename = getname(filenamei);
+        error = PTR_ERR(filename);
+        if (IS_ERR(filename))
+                goto out;
+        error = do_execve(filename, argv, envp, regs);
+        putname(filename);
+out:
+        return error;
+}
+
+asmlinkage unsigned long
+sys_mmap2(unsigned long addr, size_t len,
+        unsigned long prot, unsigned long flags,
+        unsigned long fd, unsigned long pgoff)
+{
+        struct file *file = NULL;
+        int ret = -EBADF;
+
+        flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+        if (!(flags & MAP_ANONYMOUS)) {
+                file = fget(fd);
+                if (!file) {
+                        printk(KERN_INFO "no fd in mmap\r\n");
+                        goto out;
+                }
+        }
+
+        down_write(&current->mm->mmap_sem);
+        ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+        up_write(&current->mm->mmap_sem);
+        if (file)
+                fput(file);
+out:
+        return ret;
+}
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+                        unsigned long prot, unsigned long flags,
+                        unsigned long fd, off_t offset)
+{
+        int err = -EINVAL;
+
+        if (offset & ~PAGE_MASK) {
+                printk(KERN_INFO "no pagemask in mmap\r\n");
+                goto out;
+        }
+
+        err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+out:
+        return err;
+}
+
+/*
+ * Do a system call from kernel instead of calling sys_execve so we
+ * end up with proper pt_regs.
+ */
+int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+{
+        register const char *__a __asm__("r5") = filename;
+        register const void *__b __asm__("r6") = argv;
+        register const void *__c __asm__("r7") = envp;
+        register unsigned long __syscall __asm__("r12") = __NR_execve;
+        register unsigned long __ret __asm__("r3");
+        __asm__ __volatile__ ("brki r14, 0x8"
+                        : "=r" (__ret), "=r" (__syscall)
+                        : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
+                        : "r4", "r8", "r9",
+                        "r10", "r11", "r14", "cc", "memory");
+        return __ret;
+}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
new file mode 100644
index 000000000000..529b0dbf4fe9
--- /dev/null
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -0,0 +1,365 @@
+ENTRY(sys_call_table)
+        .long sys_restart_syscall       /* 0 - old "setup()" system call,
+                                         * used for restarting */
+        .long sys_exit
+        .long sys_ni_syscall            /* was fork */
+        .long sys_read
+        .long sys_write
+        .long sys_open                  /* 5 */
+        .long sys_close
+        .long sys_waitpid
+        .long sys_creat
+        .long sys_link
+        .long sys_unlink                /* 10 */
+        .long sys_execve_wrapper
+        .long sys_chdir
+        .long sys_time
+        .long sys_mknod
+        .long sys_chmod                 /* 15 */
+        .long sys_lchown
+        .long sys_ni_syscall            /* old break syscall holder */
+        .long sys_ni_syscall            /* old stat */
+        .long sys_lseek
+        .long sys_getpid                /* 20 */
+        .long sys_mount
+        .long sys_oldumount
+        .long sys_setuid
+        .long sys_getuid
+        .long sys_stime                 /* 25 */
+        .long sys_ptrace
+        .long sys_alarm
+        .long sys_ni_syscall            /* oldfstat */
+        .long sys_pause
+        .long sys_utime                 /* 30 */
+        .long sys_ni_syscall            /* old stty syscall holder */
+        .long sys_ni_syscall            /* old gtty syscall holder */
+        .long sys_access
+        .long sys_nice
+        .long sys_ni_syscall            /* 35 - old ftime syscall holder */
+        .long sys_sync
+        .long sys_kill
+        .long sys_rename
+        .long sys_mkdir
+        .long sys_rmdir                 /* 40 */
+        .long sys_dup
+        .long sys_pipe
+        .long sys_times
+        .long sys_ni_syscall            /* old prof syscall holder */
+        .long sys_brk                   /* 45 */
+        .long sys_setgid
+        .long sys_getgid
+        .long sys_signal
+        .long sys_geteuid
+        .long sys_getegid               /* 50 */
+        .long sys_acct
+        .long sys_umount                /* recycled never used phys() */
+        .long sys_ni_syscall            /* old lock syscall holder */
+        .long sys_ioctl
+        .long sys_fcntl                 /* 55 */
+        .long sys_ni_syscall            /* old mpx syscall holder */
+        .long sys_setpgid
+        .long sys_ni_syscall            /* old ulimit syscall holder */
+        .long sys_ni_syscall            /* olduname */
+        .long sys_umask                 /* 60 */
+        .long sys_chroot
+        .long sys_ustat
+        .long sys_dup2
+        .long sys_getppid
+        .long sys_getpgrp               /* 65 */
+        .long sys_setsid
+        .long sys_sigaction
+        .long sys_sgetmask
+        .long sys_ssetmask
+        .long sys_setreuid              /* 70 */
+        .long sys_setregid
+        .long sys_sigsuspend_wrapper
+        .long sys_sigpending
+        .long sys_sethostname
+        .long sys_setrlimit             /* 75 */
+        .long sys_ni_syscall            /* old_getrlimit */
+        .long sys_getrusage
+        .long sys_gettimeofday
+        .long sys_settimeofday
+        .long sys_getgroups             /* 80 */
+        .long sys_setgroups
+        .long sys_ni_syscall            /* old_select */
+        .long sys_symlink
+        .long sys_ni_syscall            /* oldlstat */
+        .long sys_readlink              /* 85 */
+        .long sys_uselib
+        .long sys_swapon
+        .long sys_reboot
+        .long sys_ni_syscall            /* old_readdir */
+        .long sys_mmap                  /* 90 */ /* old_mmap */
+        .long sys_munmap
+        .long sys_truncate
+        .long sys_ftruncate
+        .long sys_fchmod
+        .long sys_fchown                /* 95 */
+        .long sys_getpriority
+        .long sys_setpriority
+        .long sys_ni_syscall            /* old profil syscall holder */
+        .long sys_statfs
+        .long sys_fstatfs               /* 100 */
+        .long sys_ni_syscall            /* ioperm */
+        .long sys_socketcall
+        .long sys_syslog                /* operation with system console */
+        .long sys_setitimer
+        .long sys_getitimer             /* 105 */
+        .long sys_newstat
+        .long sys_newlstat
+        .long sys_newfstat
+        .long sys_ni_syscall            /* uname */
+        .long sys_ni_syscall            /* 110 */ /* iopl */
+        .long sys_vhangup
+        .long sys_ni_syscall            /* old "idle" system call */
+        .long sys_ni_syscall            /* old sys_vm86old */
+        .long sys_wait4
+        .long sys_swapoff               /* 115 */
+        .long sys_sysinfo
+        .long sys_ipc
+        .long sys_fsync
+        .long sys_sigreturn_wrapper
+        .long sys_clone_wrapper         /* 120 */
+        .long sys_setdomainname
+        .long sys_newuname
+        .long sys_ni_syscall            /* modify_ldt */
+        .long sys_adjtimex
+        .long sys_mprotect              /* 125: sys_mprotect */
+        .long sys_sigprocmask
+        .long sys_ni_syscall            /* old "create_module" */
+        .long sys_init_module
+        .long sys_delete_module
+        .long sys_ni_syscall            /* 130: old "get_kernel_syms" */
+        .long sys_quotactl
+        .long sys_getpgid
+        .long sys_fchdir
+        .long sys_bdflush
+        .long sys_sysfs                 /* 135 */
+        .long sys_personality
+        .long sys_ni_syscall            /* reserved for afs_syscall */
+        .long sys_setfsuid
+        .long sys_setfsgid
+        .long sys_llseek                /* 140 */
+        .long sys_getdents
+        .long sys_select
+        .long sys_flock
+        .long sys_msync
+        .long sys_readv                 /* 145 */
+        .long sys_writev
+        .long sys_getsid
+        .long sys_fdatasync
+        .long sys_sysctl
+        .long sys_mlock         /* 150: sys_mlock */
+        .long sys_munlock
+        .long sys_mlockall
+        .long sys_munlockall
+        .long sys_sched_setparam
+        .long sys_sched_getparam        /* 155 */
+        .long sys_sched_setscheduler
+        .long sys_sched_getscheduler
+        .long sys_sched_yield
+        .long sys_sched_get_priority_max
+        .long sys_sched_get_priority_min        /* 160 */
+        .long sys_sched_rr_get_interval
+        .long sys_nanosleep
+        .long sys_mremap
+        .long sys_setresuid
+        .long sys_getresuid             /* 165 */
+        .long sys_ni_syscall            /* sys_vm86 */
+        .long sys_ni_syscall            /* Old sys_query_module */
+        .long sys_poll
+        .long sys_nfsservctl
+        .long sys_setresgid             /* 170 */
+        .long sys_getresgid
+        .long sys_prctl
+        .long sys_rt_sigreturn_wrapper
+        .long sys_rt_sigaction
+        .long sys_rt_sigprocmask        /* 175 */
+        .long sys_rt_sigpending
+        .long sys_rt_sigtimedwait
+        .long sys_rt_sigqueueinfo
+        .long sys_rt_sigsuspend_wrapper
+        .long sys_pread64               /* 180 */
+        .long sys_pwrite64
+        .long sys_chown
+        .long sys_getcwd
+        .long sys_capget
+        .long sys_capset                /* 185 */
+        .long sys_ni_syscall            /* sigaltstack */
+        .long sys_sendfile
+        .long sys_ni_syscall            /* reserved for streams1 */
+        .long sys_ni_syscall            /* reserved for streams2 */
+        .long sys_vfork_wrapper         /* 190 */
+        .long sys_getrlimit
+        .long sys_mmap2                 /* mmap2 */
+        .long sys_truncate64
+        .long sys_ftruncate64
+        .long sys_stat64                /* 195 */
+        .long sys_lstat64
+        .long sys_fstat64
+        .long sys_lchown
+        .long sys_getuid
+        .long sys_getgid                /* 200 */
+        .long sys_geteuid
+        .long sys_getegid
+        .long sys_setreuid
+        .long sys_setregid
+        .long sys_getgroups             /* 205 */
+        .long sys_setgroups
+        .long sys_fchown
+        .long sys_setresuid
+        .long sys_getresuid
+        .long sys_setresgid             /* 210 */
+        .long sys_getresgid
+        .long sys_chown
+        .long sys_setuid
+        .long sys_setgid
+        .long sys_setfsuid              /* 215 */
+        .long sys_setfsgid
+        .long sys_pivot_root
+        .long sys_mincore
+        .long sys_madvise
+        .long sys_getdents64            /* 220 */
+        .long sys_fcntl64
+        .long sys_ni_syscall            /* reserved for TUX */
+        .long sys_ni_syscall
+        .long sys_gettid
+        .long sys_readahead             /* 225 */
+        .long sys_setxattr
+        .long sys_lsetxattr
+        .long sys_fsetxattr
+        .long sys_getxattr
+        .long sys_lgetxattr             /* 230 */
+        .long sys_fgetxattr
+        .long sys_listxattr
+        .long sys_llistxattr
+        .long sys_flistxattr
+        .long sys_removexattr           /* 235 */
+        .long sys_lremovexattr
+        .long sys_fremovexattr
+        .long sys_tkill
+        .long sys_sendfile64
+        .long sys_futex                 /* 240 */
+        .long sys_sched_setaffinity
+        .long sys_sched_getaffinity
+        .long sys_ni_syscall            /* set_thread_area */
+        .long sys_ni_syscall            /* get_thread_area */
+        .long sys_io_setup              /* 245 */
+        .long sys_io_destroy
+        .long sys_io_getevents
+        .long sys_io_submit
+        .long sys_io_cancel
+        .long sys_fadvise64             /* 250 */
+        .long sys_ni_syscall
+        .long sys_exit_group
+        .long sys_lookup_dcookie
+        .long sys_epoll_create
+        .long sys_epoll_ctl             /* 255 */
+        .long sys_epoll_wait
+        .long sys_remap_file_pages
+        .long sys_set_tid_address
+        .long sys_timer_create
+        .long sys_timer_settime         /* 260 */
+        .long sys_timer_gettime
+        .long sys_timer_getoverrun
+        .long sys_timer_delete
+        .long sys_clock_settime
+        .long sys_clock_gettime         /* 265 */
+        .long sys_clock_getres
+        .long sys_clock_nanosleep
+        .long sys_statfs64
+        .long sys_fstatfs64
+        .long sys_tgkill                /* 270 */
+        .long sys_utimes
+        .long sys_fadvise64_64
+        .long sys_ni_syscall            /* sys_vserver */
+        .long sys_mbind
+        .long sys_get_mempolicy
+        .long sys_set_mempolicy
+        .long sys_mq_open
+        .long sys_mq_unlink
+        .long sys_mq_timedsend
+        .long sys_mq_timedreceive       /* 280 */
+        .long sys_mq_notify
+        .long sys_mq_getsetattr
+        .long sys_kexec_load
+        .long sys_waitid
+        .long sys_ni_syscall            /* 285 */ /* available */
+        .long sys_add_key
+        .long sys_request_key
+        .long sys_keyctl
+        .long sys_ioprio_set
+        .long sys_ioprio_get            /* 290 */
+        .long sys_inotify_init
+        .long sys_inotify_add_watch
+        .long sys_inotify_rm_watch
+        .long sys_ni_syscall            /* sys_migrate_pages */
+        .long sys_openat        /* 295 */
+        .long sys_mkdirat
+        .long sys_mknodat
+        .long sys_fchownat
+        .long sys_ni_syscall
+        .long sys_fstatat64             /* 300 */
+        .long sys_unlinkat
+        .long sys_renameat
+        .long sys_linkat
+        .long sys_symlinkat
+        .long sys_readlinkat            /* 305 */
+        .long sys_fchmodat
+        .long sys_faccessat
+        .long sys_ni_syscall /* pselect6 */
+        .long sys_ni_syscall /* sys_ppoll */
+        .long sys_unshare               /* 310 */
+        .long sys_set_robust_list
+        .long sys_get_robust_list
+        .long sys_splice
+        .long sys_sync_file_range
+        .long sys_tee                   /* 315 */
+        .long sys_vmsplice
+        .long sys_move_pages
+        .long sys_getcpu
+        .long sys_epoll_pwait
+        .long sys_utimensat             /* 320 */
+        .long sys_signalfd
+        .long sys_timerfd_create
+        .long sys_eventfd
+        .long sys_fallocate
+        .long sys_semtimedop            /* 325 */
+        .long sys_timerfd_settime
+        .long sys_timerfd_gettime
+        .long sys_semctl
+        .long sys_semget
+        .long sys_semop                 /* 330 */
+        .long sys_msgctl
+        .long sys_msgget
+        .long sys_msgrcv
+        .long sys_msgsnd
+        .long sys_shmat                 /* 335 */
+        .long sys_shmctl
+        .long sys_shmdt
+        .long sys_shmget
+        .long sys_signalfd4     /* new syscall */
+        .long sys_eventfd2              /* 340 */
+        .long sys_epoll_create1
+        .long sys_dup3
+        .long sys_pipe2
+        .long sys_inotify_init1
+        .long sys_socket                /* 345 */
+        .long sys_socketpair
+        .long sys_bind
+        .long sys_listen
+        .long sys_accept
+        .long sys_connect               /* 350 */
+        .long sys_getsockname
+        .long sys_getpeername
+        .long sys_sendto
+        .long sys_send
+        .long sys_recvfrom              /* 355 */
+        .long sys_recv
+        .long sys_setsockopt
+        .long sys_getsockopt
+        .long sys_shutdown
+        .long sys_sendmsg               /* 360 */
+        .long sys_recvmsg
+        .long sys_ni_syscall
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
new file mode 100644
index 000000000000..05a497eefd78
--- /dev/null
+++ b/arch/microblaze/kernel/timer.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/profile.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <asm/cpuinfo.h>
+#include <asm/setup.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SELFMOD_TIMER
+#include <asm/selfmod.h>
+#define TIMER_BASE      BARRIER_BASE_ADDR
+#else
+static unsigned int timer_baseaddr;
+#define TIMER_BASE      timer_baseaddr
+#endif
+
+#define TCSR0   (0x00)
+#define TLR0    (0x04)
+#define TCR0    (0x08)
+#define TCSR1   (0x10)
+#define TLR1    (0x14)
+#define TCR1    (0x18)
+
+#define TCSR_MDT        (1<<0)
+#define TCSR_UDT        (1<<1)
+#define TCSR_GENT       (1<<2)
+#define TCSR_CAPT       (1<<3)
+#define TCSR_ARHT       (1<<4)
+#define TCSR_LOAD       (1<<5)
+#define TCSR_ENIT       (1<<6)
+#define TCSR_ENT        (1<<7)
+#define TCSR_TINT       (1<<8)
+#define TCSR_PWMA       (1<<9)
+#define TCSR_ENALL      (1<<10)
+
+static inline void microblaze_timer0_stop(void)
+{
+        out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT);
+}
+
+static inline void microblaze_timer0_start_periodic(unsigned long load_val)
+{
+        if (!load_val)
+                load_val = 1;
+        out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */
+
+        /* load the initial value */
+        out_be32(TIMER_BASE + TCSR0, TCSR_LOAD);
+
+        /* see timer data sheet for detail
+         * !ENALL - don't enable 'em all
+         * !PWMA - disable pwm
+         * TINT - clear interrupt status
+         * ENT- enable timer itself
+         * EINT - enable interrupt
+         * !LOAD - clear the bit to let go
+         * ARHT - auto reload
+         * !CAPT - no external trigger
+         * !GENT - no external signal
+         * UDT - set the timer as down counter
+         * !MDT0 - generate mode
+         */
+        out_be32(TIMER_BASE + TCSR0,
+                        TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+}
+
+static inline void microblaze_timer0_start_oneshot(unsigned long load_val)
+{
+        if (!load_val)
+                load_val = 1;
+        out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */
+
+        /* load the initial value */
+        out_be32(TIMER_BASE + TCSR0, TCSR_LOAD);
+
+        out_be32(TIMER_BASE + TCSR0,
+                        TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+}
+
+static int microblaze_timer_set_next_event(unsigned long delta,
+                                        struct clock_event_device *dev)
+{
+        pr_debug("%s: next event, delta %x\n", __func__, (u32)delta);
+        microblaze_timer0_start_oneshot(delta);
+        return 0;
+}
+
+static void microblaze_timer_set_mode(enum clock_event_mode mode,
+                                struct clock_event_device *evt)
+{
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                printk(KERN_INFO "%s: periodic\n", __func__);
+                microblaze_timer0_start_periodic(cpuinfo.freq_div_hz);
+                break;
+        case CLOCK_EVT_MODE_ONESHOT:
+                printk(KERN_INFO "%s: oneshot\n", __func__);
+                break;
+        case CLOCK_EVT_MODE_UNUSED:
+                printk(KERN_INFO "%s: unused\n", __func__);
+                break;
+        case CLOCK_EVT_MODE_SHUTDOWN:
+                printk(KERN_INFO "%s: shutdown\n", __func__);
+                microblaze_timer0_stop();
+                break;
+        case CLOCK_EVT_MODE_RESUME:
+                printk(KERN_INFO "%s: resume\n", __func__);
+                break;
+        }
+}
+
+static struct clock_event_device clockevent_microblaze_timer = {
+        .name           = "microblaze_clockevent",
+        .features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+        .shift          = 24,
+        .rating         = 300,
+        .set_next_event = microblaze_timer_set_next_event,
+        .set_mode       = microblaze_timer_set_mode,
+};
+
+static inline void timer_ack(void)
+{
+        out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0));
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = &clockevent_microblaze_timer;
+#ifdef CONFIG_HEART_BEAT
+        heartbeat();
+#endif
+        timer_ack();
+        evt->event_handler(evt);
+        return IRQ_HANDLED;
+}
+
+static struct irqaction timer_irqaction = {
+        .handler = timer_interrupt,
+        .flags = IRQF_DISABLED | IRQF_TIMER,
+        .name = "timer",
+        .dev_id = &clockevent_microblaze_timer,
+};
+
+static __init void microblaze_clockevent_init(void)
+{
+        clockevent_microblaze_timer.mult =
+                div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC,
+                                clockevent_microblaze_timer.shift);
+        clockevent_microblaze_timer.max_delta_ns =
+                clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer);
+        clockevent_microblaze_timer.min_delta_ns =
+                clockevent_delta2ns(1, &clockevent_microblaze_timer);
+        clockevent_microblaze_timer.cpumask = cpumask_of(0);
+        clockevents_register_device(&clockevent_microblaze_timer);
+}
+
+static cycle_t microblaze_read(void)
+{
+        /* reading actual value of timer 1 */
+        return (cycle_t) (in_be32(TIMER_BASE + TCR1));
+}
+
+static struct clocksource clocksource_microblaze = {
+        .name           = "microblaze_clocksource",
+        .rating         = 300,
+        .read           = microblaze_read,
+        .mask           = CLOCKSOURCE_MASK(32),
+        .shift          = 24, /* I can shift it */
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init microblaze_clocksource_init(void)
+{
+        clocksource_microblaze.mult =
+                        clocksource_hz2mult(cpuinfo.cpu_clock_freq,
+                                                clocksource_microblaze.shift);
+        if (clocksource_register(&clocksource_microblaze))
+                panic("failed to register clocksource");
+
+        /* stop timer1 */
+        out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT);
+        /* start timer1 - up counting without interrupt */
+        out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+        return 0;
+}
+
+void __init time_init(void)
+{
+        u32 irq, i = 0;
+        u32 timer_num = 1;
+        struct device_node *timer = NULL;
+#ifdef CONFIG_SELFMOD_TIMER
+        unsigned int timer_baseaddr = 0;
+        int arr_func[] = {
+                                (int)&microblaze_read,
+                                (int)&timer_interrupt,
+                                (int)&microblaze_clocksource_init,
+                                (int)&microblaze_timer_set_mode,
+                                (int)&microblaze_timer_set_next_event,
+                                0
+                        };
+#endif
+        char *timer_list[] = {
+                                "xlnx,xps-timer-1.00.a",
+                                "xlnx,opb-timer-1.00.b",
+                                "xlnx,opb-timer-1.00.a",
+                                NULL
+                        };
+
+        for (i = 0; timer_list[i] != NULL; i++) {
+                timer = of_find_compatible_node(NULL, NULL, timer_list[i]);
+                if (timer)
+                        break;
+        }
+
+        timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
+        timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
+        irq = *(int *) of_get_property(timer, "interrupts", NULL);
+        timer_num =
+                *(int *) of_get_property(timer, "xlnx,one-timer-only", NULL);
+        if (timer_num) {
+                printk(KERN_EMERG "Please enable two timers in HW\n");
+                BUG();
+        }
+
+#ifdef CONFIG_SELFMOD_TIMER
+        selfmod_function((int *) arr_func, timer_baseaddr);
+#endif
+        printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n",
+                timer_list[i], timer_baseaddr, irq);
+
+        cpuinfo.freq_div_hz = cpuinfo.cpu_clock_freq / HZ;
+
+        setup_irq(irq, &timer_irqaction);
+#ifdef CONFIG_HEART_BEAT
+        setup_heartbeat();
+#endif
+        microblaze_clocksource_init();
+        microblaze_clockevent_init();
+}
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
new file mode 100644
index 000000000000..fbdc533c61e3
--- /dev/null
+++ b/arch/microblaze/kernel/traps.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kallsyms.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/debug_locks.h>
+
+#include <asm/exceptions.h>
+#include <asm/system.h>
+
+void trap_init(void)
+{
+        __enable_hw_exceptions();
+}
+
+void __bad_xchg(volatile void *ptr, int size)
+{
+        printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
+                __builtin_return_address(0), ptr, size);
+        BUG();
+}
+EXPORT_SYMBOL(__bad_xchg);
+
+static int kstack_depth_to_print = 24;
+
+static int __init kstack_setup(char *s)
+{
+        kstack_depth_to_print = strict_strtoul(s, 0, 0);
+
+        return 1;
+}
+__setup("kstack=", kstack_setup);
+
+void show_trace(struct task_struct *task, unsigned long *stack)
+{
+        unsigned long addr;
+
+        if (!stack)
+                stack = (unsigned long *)&stack;
+
+        printk(KERN_NOTICE "Call Trace: ");
+#ifdef CONFIG_KALLSYMS
+        printk(KERN_NOTICE "\n");
+#endif
+        while (!kstack_end(stack)) {
+                addr = *stack++;
+                /*
+                 * If the address is either in the text segment of the
+                 * kernel, or in the region which contains vmalloc'ed
+                 * memory, it *may* be the address of a calling
+                 * routine; if so, print it so that someone tracing
+                 * down the cause of the crash will be able to figure
+                 * out the call path that was taken.
+                 */
+                if (kernel_text_address(addr))
+                        print_ip_sym(addr);
+        }
+        printk(KERN_NOTICE "\n");
+
+        if (!task)
+                task = current;
+
+        debug_show_held_locks(task);
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+        unsigned long *stack;
+        int i;
+
+        if (sp == NULL) {
+                if (task)
+                        sp = (unsigned long *) ((struct thread_info *)
+                                                (task->stack))->cpu_context.r1;
+                else
+                        sp = (unsigned long *)&sp;
+        }
+
+        stack = sp;
+
+        printk(KERN_INFO "\nStack:\n  ");
+
+        for (i = 0; i < kstack_depth_to_print; i++) {
+                if (kstack_end(sp))
+                        break;
+                if (i && ((i % 8) == 0))
+                        printk("\n  ");
+                printk("%08lx ", *sp++);
+        }
+        printk("\n");
+        show_trace(task, stack);
+}
+
+void dump_stack(void)
+{
+        show_stack(NULL, NULL);
+}
+EXPORT_SYMBOL(dump_stack);
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..840385e51291
--- /dev/null
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze")
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+#include <asm-generic/vmlinux.lds.h>
+
+jiffies = jiffies_64 + 4;
+
+SECTIONS {
+        . = CONFIG_KERNEL_BASE_ADDR;
+
+        .text : {
+                _text = . ;
+                _stext = . ;
+                *(.text .text.*)
+                *(.fixup)
+
+                *(.exitcall.exit)
+                SCHED_TEXT
+                LOCK_TEXT
+                KPROBES_TEXT
+                . = ALIGN (4) ;
+                _etext = . ;
+        }
+
+        . = ALIGN (4) ;
+        _fdt_start = . ; /* place for fdt blob */
+        . = . + 0x4000;
+        _fdt_end = . ;
+
+        . = ALIGN(16);
+        RODATA
+        . = ALIGN(16);
+        __ex_table : {
+                __start___ex_table = .;
+                *(__ex_table)
+                __stop___ex_table = .;
+        }
+
+        /*
+         * sdata2 section can go anywhere, but must be word aligned
+         * and SDA2_BASE must point to the middle of it
+         */
+        .sdata2 : {
+                _ssrw = .;
+                . = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
+                *(.sdata2)
+        . = ALIGN(8);
+        _essrw = .;
+        _ssrw_size = _essrw - _ssrw;
+        _KERNEL_SDA2_BASE_ = _ssrw + (_ssrw_size / 2);
+        }
+
+        _sdata = . ;
+        .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
+                *(.data)
+        }
+        . = ALIGN(32);
+        .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+        _edata = . ;
+
+        /* Reserve some low RAM for r0 based memory references */
+        . = ALIGN(0x4) ;
+        r0_ram = . ;
+        . = . +  4096;  /* a page should be enough */
+
+        /* The initial task */
+        . = ALIGN(8192);
+        .data.init_task : { *(.data.init_task) }
+
+        /* Under the microblaze ABI, .sdata and .sbss must be contiguous */
+        . = ALIGN(8);
+        .sdata : {
+                _ssro = .;
+                *(.sdata)
+        }
+
+        .sbss : {
+                _ssbss = .;
+                *(.sbss)
+                _esbss = .;
+                _essro = .;
+                _ssro_size = _essro - _ssro ;
+                _KERNEL_SDA_BASE_ = _ssro + (_ssro_size / 2) ;
+        }
+
+        __init_begin = .;
+
+        . = ALIGN(4096);
+        .init.text : {
+                _sinittext = . ;
+                *(.init.text)
+                *(.exit.text)
+                *(.exit.data)
+                _einittext = .;
+        }
+
+        .init.data : { *(.init.data) }
+
+        . = ALIGN(4);
+        .init.ivt : {
+                __ivt_start = .;
+                *(.init.ivt)
+                __ivt_end = .;
+        }
+
+        .init.setup : {
+                __setup_start = .;
+                *(.init.setup)
+                __setup_end = .;
+        }
+
+        .initcall.init : {
+                __initcall_start = .;
+                INITCALLS
+                __initcall_end = .;
+        }
+
+        .con_initcall.init : {
+                __con_initcall_start = .;
+                *(.con_initcall.init)
+                __con_initcall_end = .;
+        }
+
+        __init_end_before_initramfs = .;
+
+        .init.ramfs ALIGN(4096) : {
+                __initramfs_start = .;
+                *(.init.ramfs)
+                __initramfs_end = .;
+                . = ALIGN(4);
+                LONG(0);
+/*
+ * FIXME this can break initramfs for MMU.
+ * Pad init.ramfs up to page boundary,
+ * so that __init_end == __bss_start. This will make image.elf
+ * consistent with the image.bin
+ */
+                /* . = ALIGN(4096); */
+        }
+        __init_end = .;
+
+        .bss ALIGN (4096) : { /* page aligned when MMU used */
+                __bss_start = . ;
+                        *(.bss*)
+                        *(COMMON)
+                . = ALIGN (4) ;
+                __bss_stop = . ;
+                _ebss = . ;
+        }
+        . = ALIGN(4096);
+        _end = .;
+}
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
new file mode 100644
index 000000000000..d27126bf306a
--- /dev/null
+++ b/arch/microblaze/lib/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+
+lib-y :=  memset.o checksum.o
+
+ifeq ($(CONFIG_OPT_LIB_ASM),y)
+lib-y += fastcopy.o
+else
+lib-y += memcpy.o memmove.o
+endif
+
+lib-y +=  uaccess.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
new file mode 100644
index 000000000000..809340070a13
--- /dev/null
+++ b/arch/microblaze/lib/checksum.c
@@ -0,0 +1,163 @@
+/*
+ *
+ * INET         An implementation of the TCP/IP protocol suite for the LINUX
+ *              operating system.  INET is implemented using the  BSD Socket
+ *              interface as the means of communication with the user level.
+ *
+ *              IP/TCP/UDP checksumming routines
+ *
+ * Authors:     Jorge Cwik, <jorge@laser.satlink.net>
+ *              Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *              Tom May, <ftom@netcom.com>
+ *              Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ *              Lots of code moved from tcp.c and ip.c; see those files
+ *              for more names.
+ *
+ * 03/02/96     Jes Sorensen, Andreas Schwab, Roman Hodek:
+ *              Fixed some nasty bugs, causing some horrible crashes.
+ *              A: At some points, the sum (%0) was used as
+ *              length-counter instead of the length counter
+ *              (%1). Thanks to Roman Hodek for pointing this out.
+ *              B: GCC seems to mess up if one uses too many
+ *              data-registers to hold input values and one tries to
+ *              specify d0 and d1 as scratch registers. Letting gcc
+ *              choose these registers itself solves the problem.
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
+ kills, so most of the assembly has to go. */
+
+#include <net/checksum.h>
+#include <asm/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned short from32to16(unsigned long x)
+{
+        /* add up 16-bit and 16-bit for 16+c bit */
+        x = (x & 0xffff) + (x >> 16);
+        /* add up carry.. */
+        x = (x & 0xffff) + (x >> 16);
+        return x;
+}
+
+static unsigned int do_csum(const unsigned char *buff, int len)
+{
+        int odd, count;
+        unsigned long result = 0;
+
+        if (len <= 0)
+                goto out;
+        odd = 1 & (unsigned long) buff;
+        if (odd) {
+                result = *buff;
+                len--;
+                buff++;
+        }
+        count = len >> 1;               /* nr of 16-bit words.. */
+        if (count) {
+                if (2 & (unsigned long) buff) {
+                        result += *(unsigned short *) buff;
+                        count--;
+                        len -= 2;
+                        buff += 2;
+                }
+                count >>= 1;            /* nr of 32-bit words.. */
+                if (count) {
+                        unsigned long carry = 0;
+                        do {
+                                unsigned long w = *(unsigned long *) buff;
+                                count--;
+                                buff += 4;
+                                result += carry;
+                                result += w;
+                                carry = (w > result);
+                        } while (count);
+                        result += carry;
+                        result = (result & 0xffff) + (result >> 16);
+                }
+                if (len & 2) {
+                        result += *(unsigned short *) buff;
+                        buff += 2;
+                }
+        }
+        if (len & 1)
+                result += (*buff << 8);
+        result = from32to16(result);
+        if (odd)
+                result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+out:
+        return result;
+}
+
+/*
+ *      This is a version of ip_compute_csum() optimized for IP headers,
+ *      which always checksum on 4 octet boundaries.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+        return (__force __sum16)~do_csum(iph, ihl*4);
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+        unsigned int result = do_csum(buff, len);
+
+        /* add in old sum, and carry.. */
+        result += sum;
+        if (sum > result)
+                result += 1;
+        return result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const unsigned char *buff, int len)
+{
+        return ~do_csum(buff, len);
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_from_user(const char __user *src, char *dst, int len,
+                                                int sum, int *csum_err)
+{
+        if (csum_err)
+                *csum_err = 0;
+        memcpy(dst, src, len);
+        return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy(const char *src, char *dst, int len, int sum)
+{
+        memcpy(dst, src, len);
+        return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
new file mode 100644
index 000000000000..02e3ab4eddf3
--- /dev/null
+++ b/arch/microblaze/lib/fastcopy.S
@@ -0,0 +1,662 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2008 Jim Law - Iris LP  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Jim Law <jlaw@irispower.com>
+ *
+ * intended to replace:
+ *      memcpy in memcpy.c and
+ *      memmove in memmove.c
+ * ... in arch/microblaze/lib
+ *
+ *
+ * assly_fastcopy.S
+ *
+ * Attempt at quicker memcpy and memmove for MicroBlaze
+ *      Input : Operand1 in Reg r5 - destination address
+ *              Operand2 in Reg r6 - source address
+ *              Operand3 in Reg r7 - number of bytes to transfer
+ *      Output: Result in Reg r3 - starting destinaition address
+ *
+ *
+ * Explanation:
+ *      Perform (possibly unaligned) copy of a block of memory
+ *      between mem locations with size of xfer spec'd in bytes
+ */
+
+#include <linux/linkage.h>
+
+        .globl  memcpy
+        .ent    memcpy
+
+memcpy:
+fast_memcpy_ascending:
+        /* move d to return register as value of function */
+        addi    r3, r5, 0
+
+        addi    r4, r0, 4       /* n = 4 */
+        cmpu    r4, r4, r7      /* n = c - n  (unsigned) */
+        blti    r4, a_xfer_end  /* if n < 0, less than one word to transfer */
+
+        /* transfer first 0~3 bytes to get aligned dest address */
+        andi    r4, r5, 3               /* n = d & 3 */
+        /* if zero, destination already aligned */
+        beqi    r4, a_dalign_done
+        /* n = 4 - n (yields 3, 2, 1 transfers for 1, 2, 3 addr offset) */
+        rsubi   r4, r4, 4
+        rsub    r7, r4, r7              /* c = c - n adjust c */
+
+a_xfer_first_loop:
+        /* if no bytes left to transfer, transfer the bulk */
+        beqi    r4, a_dalign_done
+        lbui    r11, r6, 0              /* h = *s */
+        sbi     r11, r5, 0              /* *d = h */
+        addi    r6, r6, 1               /* s++ */
+        addi    r5, r5, 1               /* d++ */
+        brid    a_xfer_first_loop       /* loop */
+        addi    r4, r4, -1              /* n-- (IN DELAY SLOT) */
+
+a_dalign_done:
+        addi    r4, r0, 32              /* n = 32 */
+        cmpu    r4, r4, r7              /* n = c - n  (unsigned) */
+        /* if n < 0, less than one block to transfer */
+        blti    r4, a_block_done
+
+a_block_xfer:
+        andi    r4, r7, 0xffffffe0      /* n = c & ~31 */
+        rsub    r7, r4, r7              /* c = c - n */
+
+        andi    r9, r6, 3               /* t1 = s & 3 */
+        /* if temp != 0, unaligned transfers needed */
+        bnei    r9, a_block_unaligned
+
+a_block_aligned:
+        lwi     r9, r6, 0               /* t1 = *(s + 0) */
+        lwi     r10, r6, 4              /* t2 = *(s + 4) */
+        lwi     r11, r6, 8              /* t3 = *(s + 8) */
+        lwi     r12, r6, 12             /* t4 = *(s + 12) */
+        swi     r9, r5, 0               /* *(d + 0) = t1 */
+        swi     r10, r5, 4              /* *(d + 4) = t2 */
+        swi     r11, r5, 8              /* *(d + 8) = t3 */
+        swi     r12, r5, 12             /* *(d + 12) = t4 */
+        lwi     r9, r6, 16              /* t1 = *(s + 16) */
+        lwi     r10, r6, 20             /* t2 = *(s + 20) */
+        lwi     r11, r6, 24             /* t3 = *(s + 24) */
+        lwi     r12, r6, 28             /* t4 = *(s + 28) */
+        swi     r9, r5, 16              /* *(d + 16) = t1 */
+        swi     r10, r5, 20             /* *(d + 20) = t2 */
+        swi     r11, r5, 24             /* *(d + 24) = t3 */
+        swi     r12, r5, 28             /* *(d + 28) = t4 */
+        addi    r6, r6, 32              /* s = s + 32 */
+        addi    r4, r4, -32             /* n = n - 32 */
+        bneid   r4, a_block_aligned     /* while (n) loop */
+        addi    r5, r5, 32              /* d = d + 32 (IN DELAY SLOT) */
+        bri     a_block_done
+
+a_block_unaligned:
+        andi    r8, r6, 0xfffffffc      /* as = s & ~3 */
+        add     r6, r6, r4              /* s = s + n */
+        lwi     r11, r8, 0              /* h = *(as + 0) */
+
+        addi    r9, r9, -1
+        beqi    r9, a_block_u1          /* t1 was 1 => 1 byte offset */
+        addi    r9, r9, -1
+        beqi    r9, a_block_u2          /* t1 was 2 => 2 byte offset */
+
+a_block_u3:
+        bslli   r11, r11, 24    /* h = h << 24 */
+a_bu3_loop:
+        lwi     r12, r8, 4      /* v = *(as + 4) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 0       /* *(d + 0) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 8      /* v = *(as + 8) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 4       /* *(d + 4) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 12     /* v = *(as + 12) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 8       /* *(d + 8) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 16     /* v = *(as + 16) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 12      /* *(d + 12) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 20     /* v = *(as + 20) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 16      /* *(d + 16) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 24     /* v = *(as + 24) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 20      /* *(d + 20) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 28     /* v = *(as + 28) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 24      /* *(d + 24) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        lwi     r12, r8, 32     /* v = *(as + 32) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 28      /* *(d + 28) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        addi    r8, r8, 32      /* as = as + 32 */
+        addi    r4, r4, -32     /* n = n - 32 */
+        bneid   r4, a_bu3_loop  /* while (n) loop */
+        addi    r5, r5, 32      /* d = d + 32 (IN DELAY SLOT) */
+        bri     a_block_done
+
+a_block_u1:
+        bslli   r11, r11, 8     /* h = h << 8 */
+a_bu1_loop:
+        lwi     r12, r8, 4      /* v = *(as + 4) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 0       /* *(d + 0) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 8      /* v = *(as + 8) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 4       /* *(d + 4) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 12     /* v = *(as + 12) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 8       /* *(d + 8) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 16     /* v = *(as + 16) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 12      /* *(d + 12) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 20     /* v = *(as + 20) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 16      /* *(d + 16) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 24     /* v = *(as + 24) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 20      /* *(d + 20) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 28     /* v = *(as + 28) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 24      /* *(d + 24) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        lwi     r12, r8, 32     /* v = *(as + 32) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 28      /* *(d + 28) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        addi    r8, r8, 32      /* as = as + 32 */
+        addi    r4, r4, -32     /* n = n - 32 */
+        bneid   r4, a_bu1_loop  /* while (n) loop */
+        addi    r5, r5, 32      /* d = d + 32 (IN DELAY SLOT) */
+        bri     a_block_done
+
+a_block_u2:
+        bslli   r11, r11, 16    /* h = h << 16 */
+a_bu2_loop:
+        lwi     r12, r8, 4      /* v = *(as + 4) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 0       /* *(d + 0) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 8      /* v = *(as + 8) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 4       /* *(d + 4) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 12     /* v = *(as + 12) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 8       /* *(d + 8) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 16     /* v = *(as + 16) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 12      /* *(d + 12) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 20     /* v = *(as + 20) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 16      /* *(d + 16) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 24     /* v = *(as + 24) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 20      /* *(d + 20) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 28     /* v = *(as + 28) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 24      /* *(d + 24) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        lwi     r12, r8, 32     /* v = *(as + 32) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 28      /* *(d + 28) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        addi    r8, r8, 32      /* as = as + 32 */
+        addi    r4, r4, -32     /* n = n - 32 */
+        bneid   r4, a_bu2_loop  /* while (n) loop */
+        addi    r5, r5, 32      /* d = d + 32 (IN DELAY SLOT) */
+
+a_block_done:
+        addi    r4, r0, 4       /* n = 4 */
+        cmpu    r4, r4, r7      /* n = c - n  (unsigned) */
+        blti    r4, a_xfer_end  /* if n < 0, less than one word to transfer */
+
+a_word_xfer:
+        andi    r4, r7, 0xfffffffc      /* n = c & ~3 */
+        addi    r10, r0, 0              /* offset = 0 */
+
+        andi    r9, r6, 3               /* t1 = s & 3 */
+        /* if temp != 0, unaligned transfers needed */
+        bnei    r9, a_word_unaligned
+
+a_word_aligned:
+        lw      r9, r6, r10             /* t1 = *(s+offset) */
+        sw      r9, r5, r10             /* *(d+offset) = t1 */
+        addi    r4, r4,-4               /* n-- */
+        bneid   r4, a_word_aligned      /* loop */
+        addi    r10, r10, 4             /* offset++ (IN DELAY SLOT) */
+
+        bri     a_word_done
+
+a_word_unaligned:
+        andi    r8, r6, 0xfffffffc      /* as = s & ~3 */
+        lwi     r11, r8, 0              /* h = *(as + 0) */
+        addi    r8, r8, 4               /* as = as + 4 */
+
+        addi    r9, r9, -1
+        beqi    r9, a_word_u1           /* t1 was 1 => 1 byte offset */
+        addi    r9, r9, -1
+        beqi    r9, a_word_u2           /* t1 was 2 => 2 byte offset */
+
+a_word_u3:
+        bslli   r11, r11, 24    /* h = h << 24 */
+a_wu3_loop:
+        lw      r12, r8, r10    /* v = *(as + offset) */
+        bsrli   r9, r12, 8      /* t1 = v >> 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        sw      r9, r5, r10     /* *(d + offset) = t1 */
+        bslli   r11, r12, 24    /* h = v << 24 */
+        addi    r4, r4,-4       /* n = n - 4 */
+        bneid   r4, a_wu3_loop  /* while (n) loop */
+        addi    r10, r10, 4     /* offset = ofset + 4 (IN DELAY SLOT) */
+
+        bri     a_word_done
+
+a_word_u1:
+        bslli   r11, r11, 8     /* h = h << 8 */
+a_wu1_loop:
+        lw      r12, r8, r10    /* v = *(as + offset) */
+        bsrli   r9, r12, 24     /* t1 = v >> 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        sw      r9, r5, r10     /* *(d + offset) = t1 */
+        bslli   r11, r12, 8     /* h = v << 8 */
+        addi    r4, r4,-4       /* n = n - 4 */
+        bneid   r4, a_wu1_loop  /* while (n) loop */
+        addi    r10, r10, 4     /* offset = ofset + 4 (IN DELAY SLOT) */
+
+        bri     a_word_done
+
+a_word_u2:
+        bslli   r11, r11, 16    /* h = h << 16 */
+a_wu2_loop:
+        lw      r12, r8, r10    /* v = *(as + offset) */
+        bsrli   r9, r12, 16     /* t1 = v >> 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        sw      r9, r5, r10     /* *(d + offset) = t1 */
+        bslli   r11, r12, 16    /* h = v << 16 */
+        addi    r4, r4,-4       /* n = n - 4 */
+        bneid   r4, a_wu2_loop  /* while (n) loop */
+        addi    r10, r10, 4     /* offset = ofset + 4 (IN DELAY SLOT) */
+
+a_word_done:
+        add     r5, r5, r10     /* d = d + offset */
+        add     r6, r6, r10     /* s = s + offset */
+        rsub    r7, r10, r7     /* c = c - offset */
+
+a_xfer_end:
+a_xfer_end_loop:
+        beqi    r7, a_done              /* while (c) */
+        lbui    r9, r6, 0               /* t1 = *s */
+        addi    r6, r6, 1               /* s++ */
+        sbi     r9, r5, 0               /* *d = t1 */
+        addi    r7, r7, -1              /* c-- */
+        brid    a_xfer_end_loop         /* loop */
+        addi    r5, r5, 1               /* d++ (IN DELAY SLOT) */
+
+a_done:
+        rtsd    r15, 8
+        nop
+
+.end memcpy
+/*----------------------------------------------------------------------------*/
+        .globl  memmove
+        .ent    memmove
+
+memmove:
+        cmpu    r4, r5, r6      /* n = s - d */
+        bgei    r4,fast_memcpy_ascending
+
+fast_memcpy_descending:
+        /* move d to return register as value of function */
+        addi    r3, r5, 0
+
+        add     r5, r5, r7      /* d = d + c */
+        add     r6, r6, r7      /* s = s + c */
+
+        addi    r4, r0, 4       /* n = 4 */
+        cmpu    r4, r4, r7      /* n = c - n  (unsigned) */
+        blti    r4,d_xfer_end   /* if n < 0, less than one word to transfer */
+
+        /* transfer first 0~3 bytes to get aligned dest address */
+        andi    r4, r5, 3               /* n = d & 3 */
+        /* if zero, destination already aligned */
+        beqi    r4,d_dalign_done
+        rsub    r7, r4, r7              /* c = c - n adjust c */
+
+d_xfer_first_loop:
+        /* if no bytes left to transfer, transfer the bulk */
+        beqi    r4,d_dalign_done
+        addi    r6, r6, -1              /* s-- */
+        addi    r5, r5, -1              /* d-- */
+        lbui    r11, r6, 0              /* h = *s */
+        sbi     r11, r5, 0              /* *d = h */
+        brid    d_xfer_first_loop       /* loop */
+        addi    r4, r4, -1              /* n-- (IN DELAY SLOT) */
+
+d_dalign_done:
+        addi    r4, r0, 32      /* n = 32 */
+        cmpu    r4, r4, r7      /* n = c - n  (unsigned) */
+        /* if n < 0, less than one block to transfer */
+        blti    r4, d_block_done
+
+d_block_xfer:
+        andi    r4, r7, 0xffffffe0      /* n = c & ~31 */
+        rsub    r7, r4, r7              /* c = c - n */
+
+        andi    r9, r6, 3               /* t1 = s & 3 */
+        /* if temp != 0, unaligned transfers needed */
+        bnei    r9, d_block_unaligned
+
+d_block_aligned:
+        addi    r6, r6, -32             /* s = s - 32 */
+        addi    r5, r5, -32             /* d = d - 32 */
+        lwi     r9, r6, 28              /* t1 = *(s + 28) */
+        lwi     r10, r6, 24             /* t2 = *(s + 24) */
+        lwi     r11, r6, 20             /* t3 = *(s + 20) */
+        lwi     r12, r6, 16             /* t4 = *(s + 16) */
+        swi     r9, r5, 28              /* *(d + 28) = t1 */
+        swi     r10, r5, 24             /* *(d + 24) = t2 */
+        swi     r11, r5, 20             /* *(d + 20) = t3 */
+        swi     r12, r5, 16             /* *(d + 16) = t4 */
+        lwi     r9, r6, 12              /* t1 = *(s + 12) */
+        lwi     r10, r6, 8              /* t2 = *(s + 8) */
+        lwi     r11, r6, 4              /* t3 = *(s + 4) */
+        lwi     r12, r6, 0              /* t4 = *(s + 0) */
+        swi     r9, r5, 12              /* *(d + 12) = t1 */
+        swi     r10, r5, 8              /* *(d + 8) = t2 */
+        swi     r11, r5, 4              /* *(d + 4) = t3 */
+        addi    r4, r4, -32             /* n = n - 32 */
+        bneid   r4, d_block_aligned     /* while (n) loop */
+        swi     r12, r5, 0              /* *(d + 0) = t4 (IN DELAY SLOT) */
+        bri     d_block_done
+
+d_block_unaligned:
+        andi    r8, r6, 0xfffffffc      /* as = s & ~3 */
+        rsub    r6, r4, r6              /* s = s - n */
+        lwi     r11, r8, 0              /* h = *(as + 0) */
+
+        addi    r9, r9, -1
+        beqi    r9,d_block_u1           /* t1 was 1 => 1 byte offset */
+        addi    r9, r9, -1
+        beqi    r9,d_block_u2           /* t1 was 2 => 2 byte offset */
+
+d_block_u3:
+        bsrli   r11, r11, 8     /* h = h >> 8 */
+d_bu3_loop:
+        addi    r8, r8, -32     /* as = as - 32 */
+        addi    r5, r5, -32     /* d = d - 32 */
+        lwi     r12, r8, 28     /* v = *(as + 28) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 28      /* *(d + 28) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 24     /* v = *(as + 24) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 24      /* *(d + 24) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 20     /* v = *(as + 20) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 20      /* *(d + 20) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 16     /* v = *(as + 16) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 16      /* *(d + 16) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 12     /* v = *(as + 12) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 12      /* *(d + 112) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 8      /* v = *(as + 8) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 8       /* *(d + 8) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 4      /* v = *(as + 4) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 4       /* *(d + 4) = t1 */
+        bsrli   r11, r12, 8     /* h = v >> 8 */
+        lwi     r12, r8, 0      /* v = *(as + 0) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 0       /* *(d + 0) = t1 */
+        addi    r4, r4, -32     /* n = n - 32 */
+        bneid   r4, d_bu3_loop  /* while (n) loop */
+        bsrli   r11, r12, 8     /* h = v >> 8 (IN DELAY SLOT) */
+        bri     d_block_done
+
+d_block_u1:
+        bsrli   r11, r11, 24    /* h = h >> 24 */
+d_bu1_loop:
+        addi    r8, r8, -32     /* as = as - 32 */
+        addi    r5, r5, -32     /* d = d - 32 */
+        lwi     r12, r8, 28     /* v = *(as + 28) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 28      /* *(d + 28) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 24     /* v = *(as + 24) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 24      /* *(d + 24) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 20     /* v = *(as + 20) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 20      /* *(d + 20) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 16     /* v = *(as + 16) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 16      /* *(d + 16) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 12     /* v = *(as + 12) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 12      /* *(d + 112) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 8      /* v = *(as + 8) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 8       /* *(d + 8) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 4      /* v = *(as + 4) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 4       /* *(d + 4) = t1 */
+        bsrli   r11, r12, 24    /* h = v >> 24 */
+        lwi     r12, r8, 0      /* v = *(as + 0) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 0       /* *(d + 0) = t1 */
+        addi    r4, r4, -32     /* n = n - 32 */
+        bneid   r4, d_bu1_loop  /* while (n) loop */
+        bsrli   r11, r12, 24    /* h = v >> 24 (IN DELAY SLOT) */
+        bri     d_block_done
+
+d_block_u2:
+        bsrli   r11, r11, 16    /* h = h >> 16 */
+d_bu2_loop:
+        addi    r8, r8, -32     /* as = as - 32 */
+        addi    r5, r5, -32     /* d = d - 32 */
+        lwi     r12, r8, 28     /* v = *(as + 28) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 28      /* *(d + 28) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 24     /* v = *(as + 24) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 24      /* *(d + 24) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 20     /* v = *(as + 20) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 20      /* *(d + 20) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 16     /* v = *(as + 16) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 16      /* *(d + 16) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 12     /* v = *(as + 12) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 12      /* *(d + 112) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 8      /* v = *(as + 8) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 8       /* *(d + 8) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 4      /* v = *(as + 4) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 4       /* *(d + 4) = t1 */
+        bsrli   r11, r12, 16    /* h = v >> 16 */
+        lwi     r12, r8, 0      /* v = *(as + 0) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        swi     r9, r5, 0       /* *(d + 0) = t1 */
+        addi    r4, r4, -32     /* n = n - 32 */
+        bneid   r4, d_bu2_loop  /* while (n) loop */
+        bsrli   r11, r12, 16    /* h = v >> 16 (IN DELAY SLOT) */
+
+d_block_done:
+        addi    r4, r0, 4       /* n = 4 */
+        cmpu    r4, r4, r7      /* n = c - n  (unsigned) */
+        blti    r4,d_xfer_end   /* if n < 0, less than one word to transfer */
+
+d_word_xfer:
+        andi    r4, r7, 0xfffffffc      /* n = c & ~3 */
+        rsub    r5, r4, r5              /* d = d - n */
+        rsub    r6, r4, r6              /* s = s - n */
+        rsub    r7, r4, r7              /* c = c - n */
+
+        andi    r9, r6, 3               /* t1 = s & 3 */
+        /* if temp != 0, unaligned transfers needed */
+        bnei    r9, d_word_unaligned
+
+d_word_aligned:
+        addi    r4, r4,-4               /* n-- */
+        lw      r9, r6, r4              /* t1 = *(s+n) */
+        bneid   r4, d_word_aligned      /* loop */
+        sw      r9, r5, r4              /* *(d+n) = t1 (IN DELAY SLOT) */
+
+        bri     d_word_done
+
+d_word_unaligned:
+        andi    r8, r6, 0xfffffffc      /* as = s & ~3 */
+        lw      r11, r8, r4             /* h = *(as + n) */
+
+        addi    r9, r9, -1
+        beqi    r9,d_word_u1            /* t1 was 1 => 1 byte offset */
+        addi    r9, r9, -1
+        beqi    r9,d_word_u2            /* t1 was 2 => 2 byte offset */
+
+d_word_u3:
+        bsrli   r11, r11, 8     /* h = h >> 8 */
+d_wu3_loop:
+        addi    r4, r4,-4       /* n = n - 4 */
+        lw      r12, r8, r4     /* v = *(as + n) */
+        bslli   r9, r12, 24     /* t1 = v << 24 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        sw      r9, r5, r4      /* *(d + n) = t1 */
+        bneid   r4, d_wu3_loop  /* while (n) loop */
+        bsrli   r11, r12, 8     /* h = v >> 8 (IN DELAY SLOT) */
+
+        bri     d_word_done
+
+d_word_u1:
+        bsrli   r11, r11, 24    /* h = h >> 24 */
+d_wu1_loop:
+        addi    r4, r4,-4       /* n = n - 4 */
+        lw      r12, r8, r4     /* v = *(as + n) */
+        bslli   r9, r12, 8      /* t1 = v << 8 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        sw      r9, r5, r4      /* *(d + n) = t1 */
+        bneid   r4, d_wu1_loop  /* while (n) loop */
+        bsrli   r11, r12, 24    /* h = v >> 24 (IN DELAY SLOT) */
+
+        bri     d_word_done
+
+d_word_u2:
+        bsrli   r11, r11, 16    /* h = h >> 16 */
+d_wu2_loop:
+        addi    r4, r4,-4       /* n = n - 4 */
+        lw      r12, r8, r4     /* v = *(as + n) */
+        bslli   r9, r12, 16     /* t1 = v << 16 */
+        or      r9, r11, r9     /* t1 = h | t1 */
+        sw      r9, r5, r4      /* *(d + n) = t1 */
+        bneid   r4, d_wu2_loop  /* while (n) loop */
+        bsrli   r11, r12, 16    /* h = v >> 16 (IN DELAY SLOT) */
+
+d_word_done:
+
+d_xfer_end:
+d_xfer_end_loop:
+        beqi    r7, a_done              /* while (c) */
+        addi    r6, r6, -1              /* s-- */
+        lbui    r9, r6, 0               /* t1 = *s */
+        addi    r5, r5, -1              /* d-- */
+        sbi     r9, r5, 0               /* *d = t1 */
+        brid    d_xfer_end_loop         /* loop */
+        addi    r7, r7, -1              /* c-- (IN DELAY SLOT) */
+
+d_done:
+        rtsd    r15, 8
+        nop
+
+.end memmove
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
new file mode 100644
index 000000000000..5880119c4487
--- /dev/null
+++ b/arch/microblaze/lib/memcpy.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccesfully, to contact the original
+ * author of this code (Michael Morrow, Intel).  Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+
+#include <linux/string.h>
+#include <asm/system.h>
+
+#ifdef __HAVE_ARCH_MEMCPY
+void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+        const char *src = v_src;
+        char *dst = v_dst;
+#ifndef CONFIG_OPT_LIB_FUNCTION
+        /* Simple, byte oriented memcpy. */
+        while (c--)
+                *dst++ = *src++;
+
+        return v_dst;
+#else
+        /* The following code tries to optimize the copy by using unsigned
+         * alignment. This will work fine if both source and destination are
+         * aligned on the same boundary. However, if they are aligned on
+         * different boundaries shifts will be necessary. This might result in
+         * bad performance on MicroBlaze systems without a barrel shifter.
+         */
+        const uint32_t *i_src;
+        uint32_t *i_dst;
+
+        if (c >= 4) {
+                unsigned  value, buf_hold;
+
+                /* Align the dstination to a word boundry. */
+                /* This is done in an endian independant manner. */
+                switch ((unsigned long)dst & 3) {
+                case 1:
+                        *dst++ = *src++;
+                        --c;
+                case 2:
+                        *dst++ = *src++;
+                        --c;
+                case 3:
+                        *dst++ = *src++;
+                        --c;
+                }
+
+                i_dst = (void *)dst;
+
+                /* Choose a copy scheme based on the source */
+                /* alignment relative to dstination. */
+                switch ((unsigned long)src & 3) {
+                case 0x0:       /* Both byte offsets are aligned */
+                        i_src  = (const void *)src;
+
+                        for (; c >= 4; c -= 4)
+                                *i_dst++ = *i_src++;
+
+                        src  = (const void *)i_src;
+                        break;
+                case 0x1:       /* Unaligned - Off by 1 */
+                        /* Word align the source */
+                        i_src = (const void *) ((unsigned)src & ~3);
+
+                        /* Load the holding buffer */
+                        buf_hold = *i_src++ << 8;
+
+                        for (; c >= 4; c -= 4) {
+                                value = *i_src++;
+                                *i_dst++ = buf_hold | value >> 24;
+                                buf_hold = value << 8;
+                        }
+
+                        /* Realign the source */
+                        src = (const void *)i_src;
+                        src -= 3;
+                        break;
+                case 0x2:       /* Unaligned - Off by 2 */
+                        /* Word align the source */
+                        i_src = (const void *) ((unsigned)src & ~3);
+
+                        /* Load the holding buffer */
+                        buf_hold = *i_src++ << 16;
+
+                        for (; c >= 4; c -= 4) {
+                                value = *i_src++;
+                                *i_dst++ = buf_hold | value >> 16;
+                                buf_hold = value << 16;
+                        }
+
+                        /* Realign the source */
+                        src = (const void *)i_src;
+                        src -= 2;
+                        break;
+                case 0x3:       /* Unaligned - Off by 3 */
+                        /* Word align the source */
+                        i_src = (const void *) ((unsigned)src & ~3);
+
+                        /* Load the holding buffer */
+                        buf_hold = *i_src++ << 24;
+
+                        for (; c >= 4; c -= 4) {
+                                value = *i_src++;
+                                *i_dst++ = buf_hold | value >> 8;
+                                buf_hold = value << 24;
+                        }
+
+                        /* Realign the source */
+                        src = (const void *)i_src;
+                        src -= 1;
+                        break;
+                }
+                dst = (void *)i_dst;
+        }
+
+        /* Finish off any remaining bytes */
+        /* simple fast copy, ... unless a cache boundry is crossed */
+        switch (c) {
+        case 3:
+                *dst++ = *src++;
+        case 2:
+                *dst++ = *src++;
+        case 1:
+                *dst++ = *src++;
+        }
+
+        return v_dst;
+#endif
+}
+EXPORT_SYMBOL(memcpy);
+#endif /* __HAVE_ARCH_MEMCPY */
+
+void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c)
+{
+        return memcpy(d, s, c);
+}
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
new file mode 100644
index 000000000000..d4e9f49a71f7
--- /dev/null
+++ b/arch/microblaze/lib/memmove.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memmove.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccesfully, to contact the original
+ * author of this code (Michael Morrow, Intel).  Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#ifdef __HAVE_ARCH_MEMMOVE
+void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+        const char *src = v_src;
+        char *dst = v_dst;
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+        const uint32_t *i_src;
+        uint32_t *i_dst;
+#endif
+
+        if (!c)
+                return v_dst;
+
+        /* Use memcpy when source is higher than dest */
+        if (v_dst <= v_src)
+                return memcpy(v_dst, v_src, c);
+
+#ifndef CONFIG_OPT_LIB_FUNCTION
+        /* copy backwards, from end to beginning */
+        src += c;
+        dst += c;
+
+        /* Simple, byte oriented memmove. */
+        while (c--)
+                *--dst = *--src;
+
+        return v_dst;
+#else
+        /* The following code tries to optimize the copy by using unsigned
+         * alignment. This will work fine if both source and destination are
+         * aligned on the same boundary. However, if they are aligned on
+         * different boundaries shifts will be necessary. This might result in
+         * bad performance on MicroBlaze systems without a barrel shifter.
+         */
+        /* FIXME this part needs more test */
+        /* Do a descending copy - this is a bit trickier! */
+        dst += c;
+        src += c;
+
+        if (c >= 4) {
+                unsigned  value, buf_hold;
+
+                /* Align the destination to a word boundry. */
+                /* This is done in an endian independant manner. */
+
+                switch ((unsigned long)dst & 3) {
+                case 3:
+                        *--dst = *--src;
+                        --c;
+                case 2:
+                        *--dst = *--src;
+                        --c;
+                case 1:
+                        *--dst = *--src;
+                        --c;
+                }
+
+                i_dst = (void *)dst;
+                /* Choose a copy scheme based on the source */
+                /* alignment relative to dstination. */
+                switch ((unsigned long)src & 3) {
+                case 0x0:       /* Both byte offsets are aligned */
+
+                        i_src  = (const void *)src;
+
+                        for (; c >= 4; c -= 4)
+                                *--i_dst = *--i_src;
+
+                        src  = (const void *)i_src;
+                        break;
+                case 0x1:       /* Unaligned - Off by 1 */
+                        /* Word align the source */
+                        i_src = (const void *) (((unsigned)src + 4) & ~3);
+
+                        /* Load the holding buffer */
+                        buf_hold = *--i_src >> 24;
+
+                        for (; c >= 4; c -= 4) {
+                                value = *--i_src;
+                                *--i_dst = buf_hold << 8 | value;
+                                buf_hold = value >> 24;
+                        }
+
+                        /* Realign the source */
+                        src = (const void *)i_src;
+                        src += 1;
+                        break;
+                case 0x2:       /* Unaligned - Off by 2 */
+                        /* Word align the source */
+                        i_src = (const void *) (((unsigned)src + 4) & ~3);
+
+                        /* Load the holding buffer */
+                        buf_hold = *--i_src >> 16;
+
+                        for (; c >= 4; c -= 4) {
+                                value = *--i_src;
+                                *--i_dst = buf_hold << 16 | value;
+                                buf_hold = value >> 16;
+                        }
+
+                        /* Realign the source */
+                        src = (const void *)i_src;
+                        src += 2;
+                        break;
+                case 0x3:       /* Unaligned - Off by 3 */
+                        /* Word align the source */
+                        i_src = (const void *) (((unsigned)src + 4) & ~3);
+
+                        /* Load the holding buffer */
+                        buf_hold = *--i_src >> 8;
+
+                        for (; c >= 4; c -= 4) {
+                                value = *--i_src;
+                                *--i_dst = buf_hold << 24 | value;
+                                buf_hold = value >> 8;
+                        }
+
+                        /* Realign the source */
+                        src = (const void *)i_src;
+                        src += 3;
+                        break;
+                }
+                dst = (void *)i_dst;
+        }
+
+        /* simple fast copy, ... unless a cache boundry is crossed */
+        /* Finish off any remaining bytes */
+        switch (c) {
+        case 4:
+                *--dst = *--src;
+        case 3:
+                *--dst = *--src;
+        case 2:
+                *--dst = *--src;
+        case 1:
+                *--dst = *--src;
+        }
+        return v_dst;
+#endif
+}
+EXPORT_SYMBOL(memmove);
+#endif /* __HAVE_ARCH_MEMMOVE */
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
new file mode 100644
index 000000000000..941dc8f94b03
--- /dev/null
+++ b/arch/microblaze/lib/memset.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memset on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccesfully, to contact the original
+ * author of this code (Michael Morrow, Intel).  Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#ifdef __HAVE_ARCH_MEMSET
+void *memset(void *v_src, int c, __kernel_size_t n)
+{
+
+        char *src = v_src;
+#ifdef CONFIG_OPT_LIB_FUNCTION
+        uint32_t *i_src;
+        uint32_t w32;
+#endif
+        /* Truncate c to 8 bits */
+        c = (c & 0xFF);
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+        /* Make a repeating word out of it */
+        w32 = c;
+        w32 |= w32 << 8;
+        w32 |= w32 << 16;
+
+        if (n >= 4) {
+                /* Align the destination to a word boundary */
+                /* This is done in an endian independant manner */
+                switch ((unsigned) src & 3) {
+                case 1:
+                        *src++ = c;
+                        --n;
+                case 2:
+                        *src++ = c;
+                        --n;
+                case 3:
+                        *src++ = c;
+                        --n;
+                }
+
+                i_src  = (void *)src;
+
+                /* Do as many full-word copies as we can */
+                for (; n >= 4; n -= 4)
+                        *i_src++ = w32;
+
+                src  = (void *)i_src;
+        }
+#endif
+        /* Simple, byte oriented memset or the rest of count. */
+        while (n--)
+                *src++ = c;
+
+        return v_src;
+}
+EXPORT_SYMBOL(memset);
+#endif /* __HAVE_ARCH_MEMSET */
diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c
new file mode 100644
index 000000000000..8eb9df5a26c9
--- /dev/null
+++ b/arch/microblaze/lib/uaccess.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/string.h>
+#include <asm/uaccess.h>
+
+#include <asm/bug.h>
+
+long strnlen_user(const char __user *src, long count)
+{
+        return strlen(src) + 1;
+}
+
+#define __do_strncpy_from_user(dst, src, count, res)                    \
+        do {                                                            \
+                char *tmp;                                              \
+                strncpy(dst, src, count);                               \
+                for (tmp = dst; *tmp && count > 0; tmp++, count--)      \
+                        ;                                               \
+                res = (tmp - dst);                                      \
+        } while (0)
+
+long __strncpy_from_user(char *dst, const char __user *src, long count)
+{
+        long res;
+        __do_strncpy_from_user(dst, src, count, res);
+        return res;
+}
+
+long strncpy_from_user(char *dst, const char __user *src, long count)
+{
+        long res = -EFAULT;
+        if (access_ok(VERIFY_READ, src, 1))
+                __do_strncpy_from_user(dst, src, count, res);
+        return res;
+}
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
new file mode 100644
index 000000000000..bf9e4479a1fd
--- /dev/null
+++ b/arch/microblaze/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile
+#
+
+obj-y := init.o
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
new file mode 100644
index 000000000000..b0c8213cd6cf
--- /dev/null
+++ b/arch/microblaze/mm/init.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/lmb.h>
+#include <linux/mm.h> /* mem_init */
+#include <linux/initrd.h>
+#include <linux/pagemap.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+
+#include <asm/page.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/tlb.h>
+
+unsigned int __page_offset;
+/* EXPORT_SYMBOL(__page_offset); */
+
+char *klimit = _end;
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.
+ */
+unsigned int memory_start;
+unsigned int memory_end; /* due to mm/nommu.c */
+unsigned int memory_size;
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+static void __init paging_init(void)
+{
+        int i;
+        unsigned long zones_size[MAX_NR_ZONES];
+
+        /*
+         * old: we can DMA to/from any address.put all page into ZONE_DMA
+         * We use only ZONE_NORMAL
+         */
+        zones_size[ZONE_NORMAL] = max_mapnr;
+
+        /* every other zones are empty */
+        for (i = 1; i < MAX_NR_ZONES; i++)
+                zones_size[i] = 0;
+
+        free_area_init(zones_size);
+}
+
+void __init setup_memory(void)
+{
+        int i;
+        unsigned long map_size;
+        u32 kernel_align_start, kernel_align_size;
+
+        /* Find main memory where is the kernel */
+        for (i = 0; i < lmb.memory.cnt; i++) {
+                memory_start = (u32) lmb.memory.region[i].base;
+                memory_end = (u32) lmb.memory.region[i].base
+                                + (u32) lmb.memory.region[i].size;
+                if ((memory_start <= (u32)_text) &&
+                                        ((u32)_text <= memory_end)) {
+                        memory_size = memory_end - memory_start;
+                        PAGE_OFFSET = memory_start;
+                        printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
+                                "size 0x%08x\n", __func__, memory_start,
+                                                memory_end, memory_size);
+                        break;
+                }
+        }
+
+        if (!memory_start || !memory_end) {
+                panic("%s: Missing memory setting 0x%08x-0x%08x\n",
+                        __func__, memory_start, memory_end);
+        }
+
+        /* reservation of region where is the kernel */
+        kernel_align_start = PAGE_DOWN((u32)_text);
+        /* ALIGN can be remove because _end in vmlinux.lds.S is align */
+        kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
+        lmb_reserve(kernel_align_start, kernel_align_size);
+        printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
+                __func__, kernel_align_start, kernel_align_start
+                        + kernel_align_size, kernel_align_size);
+
+        /*
+         * Kernel:
+         * start: base phys address of kernel - page align
+         * end: base phys address of kernel - page align
+         *
+         * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
+         * max_low_pfn
+         * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
+         * num_physpages - number of all pages
+         */
+
+        /* memory start is from the kernel end (aligned) to higher addr */
+        min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
+        /* RAM is assumed contiguous */
+        num_physpages = max_mapnr = memory_size >> PAGE_SHIFT;
+        max_pfn = max_low_pfn = memory_end >> PAGE_SHIFT;
+
+        printk(KERN_INFO "%s: max_mapnr: %#lx\n", __func__, max_mapnr);
+        printk(KERN_INFO "%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
+        printk(KERN_INFO "%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
+
+        /*
+         * Find an area to use for the bootmem bitmap.
+         * We look for the first area which is at least
+         * 128kB in length (128kB is enough for a bitmap
+         * for 4GB of memory, using 4kB pages), plus 1 page
+         * (in case the address isn't page-aligned).
+         */
+        map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+                                        min_low_pfn, max_low_pfn);
+
+        lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+
+        /* free bootmem is whole main memory */
+        free_bootmem(memory_start, memory_size);
+
+        /* reserve allocate blocks */
+        for (i = 0; i < lmb.reserved.cnt; i++) {
+                pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
+                        (u32) lmb.reserved.region[i].base,
+                        (u32) lmb_size_bytes(&lmb.reserved, i));
+                reserve_bootmem(lmb.reserved.region[i].base,
+                        lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+        }
+        paging_init();
+}
+
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+        unsigned long addr;
+
+        for (addr = begin; addr < end; addr += PAGE_SIZE) {
+                ClearPageReserved(virt_to_page(addr));
+                init_page_count(virt_to_page(addr));
+                memset((void *)addr, 0xcc, PAGE_SIZE);
+                free_page(addr);
+                totalram_pages++;
+        }
+        printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+        int pages = 0;
+        for (; start < end; start += PAGE_SIZE) {
+                ClearPageReserved(virt_to_page(start));
+                init_page_count(virt_to_page(start));
+                free_page(start);
+                totalram_pages++;
+                pages++;
+        }
+        printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+}
+#endif
+
+void free_initmem(void)
+{
+        free_init_pages("unused kernel memory",
+                        (unsigned long)(&__init_begin),
+                        (unsigned long)(&__init_end));
+}
+
+/* FIXME from arch/powerpc/mm/mem.c*/
+void show_mem(void)
+{
+        printk(KERN_NOTICE "%s\n", __func__);
+}
+
+void __init mem_init(void)
+{
+        high_memory = (void *)__va(memory_end);
+        /* this will put all memory onto the freelists */
+        totalram_pages += free_all_bootmem();
+
+        printk(KERN_INFO "Memory: %luk/%luk available\n",
+               (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+               num_physpages << (PAGE_SHIFT-10));
+}
+
+/* Check against bounds of physical memory */
+int ___range_ok(unsigned long addr, unsigned long size)
+{
+        return ((addr < memory_start) ||
+                ((addr + size) > memory_end));
+}
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
new file mode 100644
index 000000000000..8e9b4752d3ff
--- /dev/null
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -0,0 +1,85 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+choice
+        prompt "Platform"
+        default PLATFORM_MICROBLAZE_AUTO
+        help
+          Choose which hardware board/platform you are targeting.
+
+config PLATFORM_GENERIC
+        bool "Generic"
+        help
+          Choose this option for the Generic platform.
+
+endchoice
+
+config SELFMOD
+        bool "Use self modified code for intc/timer"
+        depends on EXPERIMENTAL && NO_MMU
+        default n
+        help
+          This choice enables self-modified code for interrupt controller
+          and timer.
+
+config SELFMOD_INTC
+        bool "Use self modified code for intc"
+        depends on SELFMOD
+        default y
+        help
+          This choice enables self-modified code for interrupt controller.
+
+config SELFMOD_TIMER
+        bool "Use self modified code for timer"
+        depends on SELFMOD
+        default y
+        help
+          This choice enables self-modified code for timer.
+
+config OPT_LIB_FUNCTION
+        bool "Optimalized lib function"
+        default y
+        help
+          Allows turn on optimalized library function (memcpy and memmove).
+          They are optimized by using word alignment. This will work
+          fine if both source and destination are aligned on the same
+          boundary. However, if they are aligned on different boundaries
+          shifts will be necessary. This might result in bad performance
+          on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+        bool "Optimalized lib function ASM"
+        depends on OPT_LIB_FUNCTION
+        default n
+        help
+          Allows turn on optimalized library function (memcpy and memmove).
+          Function are written in asm code.
+
+# This is still a bit broken - disabling for now JW 20070504
+config ALLOW_EDIT_AUTO
+        bool "Permit Display/edit of Kconfig.auto platform settings"
+        default n
+        help
+          Allows the editing of auto-generated platform settings from
+          the Kconfig.auto file. Obviously this does not change the
+          underlying hardware, so be very careful if you go editing
+          these settings.
+
+          Also, if you enable this, and edit various Kconfig.auto
+          settings, YOUR CHANGES WILL BE LOST if you then disable it
+          again. You have been warned!
+
+          If unsure, say no.
+
+comment "Automatic platform settings from Kconfig.auto"
+        depends on ALLOW_EDIT_AUTO
+
+if PLATFORM_GENERIC=y
+        source "arch/microblaze/platform/generic/Kconfig.auto"
+endif
+
+endmenu
diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile
new file mode 100644
index 000000000000..ea1b75cc5775
--- /dev/null
+++ b/arch/microblaze/platform/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for arch/microblaze/platform directory
+#
+#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
+
+obj-y   += platform.o
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
new file mode 100644
index 000000000000..fbca22d9c8b9
--- /dev/null
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -0,0 +1,62 @@
+#
+# (C) Copyright 2007 Michal Simek
+#
+# Michal SIMEK <monstr@monstr.eu>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+        depends on ALLOW_EDIT_AUTO
+
+config KERNEL_BASE_ADDR
+        hex "Physical address where Linux Kernel is"
+        default "0x90000000"
+        help
+          BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+        string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+        default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+        int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+        default 1
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+        int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+        default 1
+
+config XILINX_MICROBLAZE0_USE_BARREL
+        int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
+        default 1
+
+config XILINX_MICROBLAZE0_USE_DIV
+        int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
+        default 1
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+        int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO
+        default 2
+
+config XILINX_MICROBLAZE0_USE_FPU
+        int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO
+        default 2
+
+config XILINX_MICROBLAZE0_HW_VER
+        string "Core version number" if ALLOW_EDIT_AUTO
+        default 7.10.d
diff --git a/arch/microblaze/platform/generic/Makefile b/arch/microblaze/platform/generic/Makefile
new file mode 100644
index 000000000000..9a8b1bd3fa6d
--- /dev/null
+++ b/arch/microblaze/platform/generic/Makefile
@@ -0,0 +1,3 @@
+#
+# Empty Makefile to keep make clean happy
+#
diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts
new file mode 100644
index 000000000000..29993f62b30a
--- /dev/null
+++ b/arch/microblaze/platform/generic/system.dts
@@ -0,0 +1,332 @@
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "xlnx,microblaze";
+        model = "testing";
+        DDR2_SDRAM: memory@90000000 {
+                device_type = "memory";
+                reg = < 0x90000000 0x10000000 >;
+        } ;
+        chosen {
+                bootargs = "console=ttyUL0,115200 highres=on";
+                linux,stdout-path = "/plb@0/serial@84000000";
+        } ;
+        cpus {
+                #address-cells = <1>;
+                #cpus = <0x1>;
+                #size-cells = <0>;
+                microblaze_0: cpu@0 {
+                        clock-frequency = <125000000>;
+                        compatible = "xlnx,microblaze-7.10.d";
+                        d-cache-baseaddr = <0x90000000>;
+                        d-cache-highaddr = <0x9fffffff>;
+                        d-cache-line-size = <0x10>;
+                        d-cache-size = <0x2000>;
+                        device_type = "cpu";
+                        i-cache-baseaddr = <0x90000000>;
+                        i-cache-highaddr = <0x9fffffff>;
+                        i-cache-line-size = <0x10>;
+                        i-cache-size = <0x2000>;
+                        model = "microblaze,7.10.d";
+                        reg = <0>;
+                        timebase-frequency = <125000000>;
+                        xlnx,addr-tag-bits = <0xf>;
+                        xlnx,allow-dcache-wr = <0x1>;
+                        xlnx,allow-icache-wr = <0x1>;
+                        xlnx,area-optimized = <0x0>;
+                        xlnx,cache-byte-size = <0x2000>;
+                        xlnx,d-lmb = <0x1>;
+                        xlnx,d-opb = <0x0>;
+                        xlnx,d-plb = <0x1>;
+                        xlnx,data-size = <0x20>;
+                        xlnx,dcache-addr-tag = <0xf>;
+                        xlnx,dcache-always-used = <0x1>;
+                        xlnx,dcache-byte-size = <0x2000>;
+                        xlnx,dcache-line-len = <0x4>;
+                        xlnx,dcache-use-fsl = <0x1>;
+                        xlnx,debug-enabled = <0x1>;
+                        xlnx,div-zero-exception = <0x1>;
+                        xlnx,dopb-bus-exception = <0x0>;
+                        xlnx,dynamic-bus-sizing = <0x1>;
+                        xlnx,edge-is-positive = <0x1>;
+                        xlnx,family = "virtex5";
+                        xlnx,fpu-exception = <0x1>;
+                        xlnx,fsl-data-size = <0x20>;
+                        xlnx,fsl-exception = <0x0>;
+                        xlnx,fsl-links = <0x0>;
+                        xlnx,i-lmb = <0x1>;
+                        xlnx,i-opb = <0x0>;
+                        xlnx,i-plb = <0x1>;
+                        xlnx,icache-always-used = <0x1>;
+                        xlnx,icache-line-len = <0x4>;
+                        xlnx,icache-use-fsl = <0x1>;
+                        xlnx,ill-opcode-exception = <0x1>;
+                        xlnx,instance = "microblaze_0";
+                        xlnx,interconnect = <0x1>;
+                        xlnx,interrupt-is-edge = <0x0>;
+                        xlnx,iopb-bus-exception = <0x0>;
+                        xlnx,mmu-dtlb-size = <0x4>;
+                        xlnx,mmu-itlb-size = <0x2>;
+                        xlnx,mmu-tlb-access = <0x3>;
+                        xlnx,mmu-zones = <0x10>;
+                        xlnx,number-of-pc-brk = <0x1>;
+                        xlnx,number-of-rd-addr-brk = <0x0>;
+                        xlnx,number-of-wr-addr-brk = <0x0>;
+                        xlnx,opcode-0x0-illegal = <0x1>;
+                        xlnx,pvr = <0x2>;
+                        xlnx,pvr-user1 = <0x0>;
+                        xlnx,pvr-user2 = <0x0>;
+                        xlnx,reset-msr = <0x0>;
+                        xlnx,sco = <0x0>;
+                        xlnx,unaligned-exceptions = <0x1>;
+                        xlnx,use-barrel = <0x1>;
+                        xlnx,use-dcache = <0x1>;
+                        xlnx,use-div = <0x1>;
+                        xlnx,use-ext-brk = <0x1>;
+                        xlnx,use-ext-nm-brk = <0x1>;
+                        xlnx,use-extended-fsl-instr = <0x0>;
+                        xlnx,use-fpu = <0x2>;
+                        xlnx,use-hw-mul = <0x2>;
+                        xlnx,use-icache = <0x1>;
+                        xlnx,use-interrupt = <0x1>;
+                        xlnx,use-mmu = <0x3>;
+                        xlnx,use-msr-instr = <0x1>;
+                        xlnx,use-pcmp-instr = <0x1>;
+                } ;
+        } ;
+        mb_plb: plb@0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+                ranges ;
+                FLASH: flash@a0000000 {
+                        bank-width = <2>;
+                        compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+                        reg = < 0xa0000000 0x2000000 >;
+                        xlnx,family = "virtex5";
+                        xlnx,include-datawidth-matching-0 = <0x1>;
+                        xlnx,include-datawidth-matching-1 = <0x0>;
+                        xlnx,include-datawidth-matching-2 = <0x0>;
+                        xlnx,include-datawidth-matching-3 = <0x0>;
+                        xlnx,include-negedge-ioregs = <0x0>;
+                        xlnx,include-plb-ipif = <0x1>;
+                        xlnx,include-wrbuf = <0x1>;
+                        xlnx,max-mem-width = <0x10>;
+                        xlnx,mch-native-dwidth = <0x20>;
+                        xlnx,mch-plb-clk-period-ps = <0x1f40>;
+                        xlnx,mch-splb-awidth = <0x20>;
+                        xlnx,mch0-accessbuf-depth = <0x10>;
+                        xlnx,mch0-protocol = <0x0>;
+                        xlnx,mch0-rddatabuf-depth = <0x10>;
+                        xlnx,mch1-accessbuf-depth = <0x10>;
+                        xlnx,mch1-protocol = <0x0>;
+                        xlnx,mch1-rddatabuf-depth = <0x10>;
+                        xlnx,mch2-accessbuf-depth = <0x10>;
+                        xlnx,mch2-protocol = <0x0>;
+                        xlnx,mch2-rddatabuf-depth = <0x10>;
+                        xlnx,mch3-accessbuf-depth = <0x10>;
+                        xlnx,mch3-protocol = <0x0>;
+                        xlnx,mch3-rddatabuf-depth = <0x10>;
+                        xlnx,mem0-width = <0x10>;
+                        xlnx,mem1-width = <0x20>;
+                        xlnx,mem2-width = <0x20>;
+                        xlnx,mem3-width = <0x20>;
+                        xlnx,num-banks-mem = <0x1>;
+                        xlnx,num-channels = <0x0>;
+                        xlnx,priority-mode = <0x0>;
+                        xlnx,synch-mem-0 = <0x0>;
+                        xlnx,synch-mem-1 = <0x0>;
+                        xlnx,synch-mem-2 = <0x0>;
+                        xlnx,synch-mem-3 = <0x0>;
+                        xlnx,synch-pipedelay-0 = <0x2>;
+                        xlnx,synch-pipedelay-1 = <0x2>;
+                        xlnx,synch-pipedelay-2 = <0x2>;
+                        xlnx,synch-pipedelay-3 = <0x2>;
+                        xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+                        xlnx,tavdv-ps-mem-1 = <0x3a98>;
+                        xlnx,tavdv-ps-mem-2 = <0x3a98>;
+                        xlnx,tavdv-ps-mem-3 = <0x3a98>;
+                        xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+                        xlnx,tcedv-ps-mem-1 = <0x3a98>;
+                        xlnx,tcedv-ps-mem-2 = <0x3a98>;
+                        xlnx,tcedv-ps-mem-3 = <0x3a98>;
+                        xlnx,thzce-ps-mem-0 = <0x88b8>;
+                        xlnx,thzce-ps-mem-1 = <0x1b58>;
+                        xlnx,thzce-ps-mem-2 = <0x1b58>;
+                        xlnx,thzce-ps-mem-3 = <0x1b58>;
+                        xlnx,thzoe-ps-mem-0 = <0x1b58>;
+                        xlnx,thzoe-ps-mem-1 = <0x1b58>;
+                        xlnx,thzoe-ps-mem-2 = <0x1b58>;
+                        xlnx,thzoe-ps-mem-3 = <0x1b58>;
+                        xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+                        xlnx,tlzwe-ps-mem-1 = <0x0>;
+                        xlnx,tlzwe-ps-mem-2 = <0x0>;
+                        xlnx,tlzwe-ps-mem-3 = <0x0>;
+                        xlnx,twc-ps-mem-0 = <0x2af8>;
+                        xlnx,twc-ps-mem-1 = <0x3a98>;
+                        xlnx,twc-ps-mem-2 = <0x3a98>;
+                        xlnx,twc-ps-mem-3 = <0x3a98>;
+                        xlnx,twp-ps-mem-0 = <0x11170>;
+                        xlnx,twp-ps-mem-1 = <0x2ee0>;
+                        xlnx,twp-ps-mem-2 = <0x2ee0>;
+                        xlnx,twp-ps-mem-3 = <0x2ee0>;
+                        xlnx,xcl0-linesize = <0x4>;
+                        xlnx,xcl0-writexfer = <0x1>;
+                        xlnx,xcl1-linesize = <0x4>;
+                        xlnx,xcl1-writexfer = <0x1>;
+                        xlnx,xcl2-linesize = <0x4>;
+                        xlnx,xcl2-writexfer = <0x1>;
+                        xlnx,xcl3-linesize = <0x4>;
+                        xlnx,xcl3-writexfer = <0x1>;
+                } ;
+                Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "xlnx,compound";
+                        ethernet@81c00000 {
+                                compatible = "xlnx,xps-ll-temac-1.01.b";
+                                device_type = "network";
+                                interrupt-parent = <&xps_intc_0>;
+                                interrupts = < 5 2 >;
+                                llink-connected = <&PIM3>;
+                                local-mac-address = [ 02 00 00 00 00 00 ];
+                                reg = < 0x81c00000 0x40 >;
+                                xlnx,bus2core-clk-ratio = <0x1>;
+                                xlnx,phy-type = <0x1>;
+                                xlnx,phyaddr = <0x1>;
+                                xlnx,rxcsum = <0x0>;
+                                xlnx,rxfifo = <0x1000>;
+                                xlnx,temac-type = <0x0>;
+                                xlnx,txcsum = <0x0>;
+                                xlnx,txfifo = <0x1000>;
+                        } ;
+                } ;
+                IIC_EEPROM: i2c@81600000 {
+                        compatible = "xlnx,xps-iic-2.00.a";
+                        interrupt-parent = <&xps_intc_0>;
+                        interrupts = < 6 2 >;
+                        reg = < 0x81600000 0x10000 >;
+                        xlnx,clk-freq = <0x7735940>;
+                        xlnx,family = "virtex5";
+                        xlnx,gpo-width = <0x1>;
+                        xlnx,iic-freq = <0x186a0>;
+                        xlnx,scl-inertial-delay = <0x0>;
+                        xlnx,sda-inertial-delay = <0x0>;
+                        xlnx,ten-bit-adr = <0x0>;
+                } ;
+                LEDs_8Bit: gpio@81400000 {
+                        compatible = "xlnx,xps-gpio-1.00.a";
+                        interrupt-parent = <&xps_intc_0>;
+                        interrupts = < 7 2 >;
+                        reg = < 0x81400000 0x10000 >;
+                        xlnx,all-inputs = <0x0>;
+                        xlnx,all-inputs-2 = <0x0>;
+                        xlnx,dout-default = <0x0>;
+                        xlnx,dout-default-2 = <0x0>;
+                        xlnx,family = "virtex5";
+                        xlnx,gpio-width = <0x8>;
+                        xlnx,interrupt-present = <0x1>;
+                        xlnx,is-bidir = <0x1>;
+                        xlnx,is-bidir-2 = <0x1>;
+                        xlnx,is-dual = <0x0>;
+                        xlnx,tri-default = <0xffffffff>;
+                        xlnx,tri-default-2 = <0xffffffff>;
+                } ;
+                RS232_Uart_1: serial@84000000 {
+                        clock-frequency = <125000000>;
+                        compatible = "xlnx,xps-uartlite-1.00.a";
+                        current-speed = <115200>;
+                        device_type = "serial";
+                        interrupt-parent = <&xps_intc_0>;
+                        interrupts = < 8 0 >;
+                        port-number = <0>;
+                        reg = < 0x84000000 0x10000 >;
+                        xlnx,baudrate = <0x1c200>;
+                        xlnx,data-bits = <0x8>;
+                        xlnx,family = "virtex5";
+                        xlnx,odd-parity = <0x0>;
+                        xlnx,use-parity = <0x0>;
+                } ;
+                SysACE_CompactFlash: sysace@83600000 {
+                        compatible = "xlnx,xps-sysace-1.00.a";
+                        interrupt-parent = <&xps_intc_0>;
+                        interrupts = < 4 2 >;
+                        reg = < 0x83600000 0x10000 >;
+                        xlnx,family = "virtex5";
+                        xlnx,mem-width = <0x10>;
+                } ;
+                debug_module: debug@84400000 {
+                        compatible = "xlnx,mdm-1.00.d";
+                        reg = < 0x84400000 0x10000 >;
+                        xlnx,family = "virtex5";
+                        xlnx,interconnect = <0x1>;
+                        xlnx,jtag-chain = <0x2>;
+                        xlnx,mb-dbg-ports = <0x1>;
+                        xlnx,uart-width = <0x8>;
+                        xlnx,use-uart = <0x1>;
+                        xlnx,write-fsl-ports = <0x0>;
+                } ;
+                mpmc@90000000 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "xlnx,mpmc-4.02.a";
+                        PIM3: sdma@84600180 {
+                                compatible = "xlnx,ll-dma-1.00.a";
+                                interrupt-parent = <&xps_intc_0>;
+                                interrupts = < 2 2 1 2 >;
+                                reg = < 0x84600180 0x80 >;
+                        } ;
+                } ;
+                xps_intc_0: interrupt-controller@81800000 {
+                        #interrupt-cells = <0x2>;
+                        compatible = "xlnx,xps-intc-1.00.a";
+                        interrupt-controller ;
+                        reg = < 0x81800000 0x10000 >;
+                        xlnx,kind-of-intr = <0x100>;
+                        xlnx,num-intr-inputs = <0x9>;
+                } ;
+                xps_timer_1: timer@83c00000 {
+                        compatible = "xlnx,xps-timer-1.00.a";
+                        interrupt-parent = <&xps_intc_0>;
+                        interrupts = < 3 2 >;
+                        reg = < 0x83c00000 0x10000 >;
+                        xlnx,count-width = <0x20>;
+                        xlnx,family = "virtex5";
+                        xlnx,gen0-assert = <0x1>;
+                        xlnx,gen1-assert = <0x1>;
+                        xlnx,one-timer-only = <0x0>;
+                        xlnx,trig0-assert = <0x1>;
+                        xlnx,trig1-assert = <0x1>;
+                } ;
+        } ;
+}  ;
diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/platform/platform.c
new file mode 100644
index 000000000000..56e0234fa34b
--- /dev/null
+++ b/arch/microblaze/platform/platform.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * based on virtex.c file
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+        { .compatible = "simple-bus", },
+        { .compatible = "xlnx,plb-v46-1.00.a", },
+        { .compatible = "xlnx,opb-v20-1.10.c", },
+        { .compatible = "xlnx,opb-v20-1.10.b", },
+        { .compatible = "xlnx,compound", },
+        {}
+};
+
+static int __init microblaze_device_probe(void)
+{
+        of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+        return 0;
+}
+device_initcall(microblaze_device_probe);
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 41d16822e616..355926730e8d 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -370,5 +370,3 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
-
-source "arch/mn10300/oprofile/Kconfig"
diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
index 6673a28ec07a..dd0c8ff52a68 100644
--- a/arch/mn10300/Makefile
+++ b/arch/mn10300/Makefile
@@ -94,42 +94,8 @@ ifdef CONFIG_DEBUG_INFO
 KBUILD_AFLAGS   += -Wa,--gdwarf2
 endif
 
-###################################################################################################
 #
-# juggle some symlinks in the MN10300 asm include dir
+# include the appropriate processor- and unit-specific headers
 #
-#       Update machine proc and unit symlinks if something which affects
-#       them changed.  We use .proc / .unit to indicate when they were
-#       updated last, otherwise make uses the target directory mtime.
-#
-###################################################################################################
-
-# processor specific definitions
-include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
-        @echo '  SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
-ifneq ($(KBUILD_SRC),)
-        $(Q)mkdir -p include/asm-mn10300
-        $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
-else
-        $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
-endif
-        @touch $@
-
-CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
-
-prepare: include/asm-mn10300/.proc
-
-# unit specific definitions
-include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
-        @echo '  SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
-ifneq ($(KBUILD_SRC),)
-        $(Q)mkdir -p include/asm-mn10300
-        $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
-else
-        $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
-endif
-        @touch $@
-
-CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
-
-prepare: include/asm-mn10300/.unit
+KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/proc-$(PROCESSOR)/include
+KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/unit-$(UNIT)/include
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
new file mode 100644
index 000000000000..c68e1680da01
--- /dev/null
+++ b/arch/mn10300/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
new file mode 100644
index 000000000000..bc064825f9b1
--- /dev/null
+++ b/arch/mn10300/include/asm/atomic.h
@@ -0,0 +1,157 @@
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i)  { (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v)  ((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <asm/system.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int temp;
+
+        local_irq_save(flags);
+        temp = v->counter;
+        temp += i;
+        v->counter = temp;
+        local_irq_restore(flags);
+
+        return temp;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+        unsigned long flags;
+        int temp;
+
+        local_irq_save(flags);
+        temp = v->counter;
+        temp -= i;
+        v->counter = temp;
+        local_irq_restore(flags);
+
+        return temp;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+        return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+        atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+        atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+        atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+        atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)            atomic_sub_return(1, (v))
+#define atomic_inc_return(v)            atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v)       (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)          (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)          (atomic_add_return(1, (v)) == 0)
+
+#define atomic_add_unless(v, a, u)                              \
+({                                                              \
+        int c, old;                                             \
+        c = atomic_read(v);                                     \
+        while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+                c = old;                                        \
+        c != (u);                                               \
+})
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+        unsigned long flags;
+
+        mask = ~mask;
+        local_irq_save(flags);
+        *addr &= mask;
+        local_irq_restore(flags);
+}
+
+#define atomic_xchg(ptr, v)             (xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)     (cmpxchg(&((v)->counter), (old), (new)))
+
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/mn10300/include/asm/auxvec.h b/arch/mn10300/include/asm/auxvec.h
new file mode 100644
index 000000000000..4fdb60b2ae39
--- /dev/null
+++ b/arch/mn10300/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif
diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h
new file mode 100644
index 000000000000..0b610f482abb
--- /dev/null
+++ b/arch/mn10300/include/asm/bitops.h
@@ -0,0 +1,240 @@
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <asm/cpu-regs.h>
+
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr)                                     \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bset %2,(%1) # set_bit reg"               \
+                     : "=m"(*_a)                                \
+                     : "a"(_a), "d"(1 << shift),  "m"(*_a)      \
+                     : "memory", "cc");                         \
+})
+
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr)                                  \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bclr %2,(%1) # clear_bit reg"             \
+                     : "=m"(*_a)                                \
+                     : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                     : "memory", "cc");                         \
+})
+
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+        unsigned int *a = (unsigned int *) addr;
+        int mask;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        *a &= ~mask;
+}
+
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+        return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+        int     mask;
+        unsigned int *a = (unsigned int *) addr;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        *a ^= mask;
+}
+
+extern void change_bit(int nr, volatile void *addr);
+
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr)                             \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        unsigned epsw;                                          \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bset %3,(%2) # test_set_bit reg\n"        \
+                     "mov epsw,%1"                              \
+                     : "=m"(*_a), "=d"(epsw)                    \
+                     : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                     : "memory", "cc");                         \
+                                                                \
+        !(epsw & EPSW_FLAG_Z);                                  \
+})
+
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr)                          \
+({                                                              \
+        volatile unsigned char *_a = (unsigned char *)(addr);   \
+        const unsigned shift = (nr) & 7;                        \
+        unsigned epsw;                                          \
+        _a += (nr) >> 3;                                        \
+                                                                \
+        asm volatile("bclr %3,(%2) # test_clear_bit reg\n"      \
+                     "mov epsw,%1"                              \
+                     : "=m"(*_a), "=d"(epsw)                    \
+                     : "a"(_a), "d"(1 << shift), "m"(*_a)       \
+                     : "memory", "cc");                         \
+                                                                \
+        !(epsw & EPSW_FLAG_Z);                                  \
+})
+
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+        int     mask, retval;
+        unsigned int *a = (unsigned int *)addr;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        retval = (mask & *a) != 0;
+        *a ^= mask;
+
+        return retval;
+}
+
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#include <asm-generic/bitops/lock.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+        int bit;
+        asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+        return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+        int bit;
+        asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+        return bit;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+        return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+        return __ilog2_u32(word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+        /* Note: (x & -x) gives us a mask that is the least significant
+         * (rightmost) 1-bit of the value in x.
+         */
+        return fls(x & -x);
+}
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+        test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+        test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
new file mode 100644
index 000000000000..4fcf3384e259
--- /dev/null
+++ b/arch/mn10300/include/asm/bug.h
@@ -0,0 +1,35 @@
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+/*
+ * Tell the user there is some problem.
+ */
+#define _debug_bug_trap()                                       \
+do {                                                            \
+        asm volatile(                                           \
+                "       syscall 15                      \n"     \
+                "0:                                     \n"     \
+                "       .section __bug_table,\"a\"      \n"     \
+                "       .long 0b,%0,%1                  \n"     \
+                "       .previous                       \n"     \
+                :                                               \
+                : "i"(__FILE__), "i"(__LINE__)                  \
+                );                                              \
+} while (0)
+
+#define BUG() _debug_bug_trap()
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_BUG_H */
diff --git a/arch/mn10300/include/asm/bugs.h b/arch/mn10300/include/asm/bugs.h
new file mode 100644
index 000000000000..31c8bc592b47
--- /dev/null
+++ b/arch/mn10300/include/asm/bugs.h
@@ -0,0 +1,20 @@
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <asm/processor.h>
+
+static inline void __init check_bugs(void)
+{
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/arch/mn10300/include/asm/busctl-regs.h b/arch/mn10300/include/asm/busctl-regs.h
new file mode 100644
index 000000000000..1632aef73401
--- /dev/null
+++ b/arch/mn10300/include/asm/busctl-regs.h
@@ -0,0 +1,151 @@
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* bus controller registers */
+#define BCCR                    __SYSREG(0xc0002000, u32)       /* bus controller control reg */
+#define BCCR_B0AD               0x00000003      /* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD               0x0000000c      /* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD               0x00000030      /* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD               0x000000c0      /* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD               0x00000300      /* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD               0x00000c00      /* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD               0x00003000      /* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD               0x0000c000      /* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS         0x0             /* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS       0x1             /* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS        0x2             /* - direct to on chip memory */
+#define BCCR_API                0x00070000      /* bus arbitration priority */
+#define BCCR_API_DMACICD        0x00000000      /* - DMA > CI > CD */
+#define BCCR_API_DMACDCI        0x00010000      /* - DMA > CD > CI */
+#define BCCR_API_CICDDMA        0x00020000      /* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA        0x00030000      /* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN     0x00040000      /* - round robin */
+#define BCCR_BEPRI_DMACICD      0x00c00000      /* bus error address priority */
+#define BCCR_BEPRI_DMACDCI      0x00000000      /* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA      0x00400000      /* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA      0x00800000      /* - CI > CD > DMA */
+#define BCCR_BEPRI              0x00c00000      /* - CD > CI > DMA */
+#define BCCR_TMON               0x03000000      /* timeout value settings */
+#define BCCR_TMON_16IOCLK       0x00000000      /* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK      0x01000000      /* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK     0x02000000      /* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK    0x03000000      /* - 65536 IOCLK cycles */
+#define BCCR_TMOE               0x10000000      /* timeout detection enable */
+
+#define BCBERR                  __SYSREG(0xc0002010, u32)       /* bus error source reg */
+#define BCBERR_BESB             0x0000001f      /* erroneous access destination space */
+#define BCBERR_BESB_MON         0x00000001      /* - monitor space */
+#define BCBERR_BESB_IO          0x00000002      /* - IO bus */
+#define BCBERR_BESB_EX          0x00000004      /* - EX bus */
+#define BCBERR_BESB_OPEX        0x00000008      /* - OpEX bus */
+#define BCBERR_BESB_OCM         0x00000010      /* - on chip memory */
+#define BCBERR_BERW             0x00000100      /* type of access */
+#define BCBERR_BERW_WRITE       0x00000000      /* - write */
+#define BCBERR_BERW_READ        0x00000100      /* - read */
+#define BCBERR_BESD             0x00000200      /* error detector */
+#define BCBERR_BESD_BCU         0x00000000      /* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS   0x00000200      /* - slave bus detected error */
+#define BCBERR_BEBST            0x00000400      /* type of access */
+#define BCBERR_BEBST_SINGLE     0x00000000      /* - single */
+#define BCBERR_BEBST_BURST      0x00000400      /* - burst */
+#define BCBERR_BEME             0x00000800      /* multiple bus error flag */
+#define BCBERR_BEMR             0x00007000      /* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR     0x00000000      /* - no error */
+#define BCBERR_BEMR_CI          0x00001000      /* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD          0x00002000      /* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA         0x00004000      /* - DMA bus caused error */
+
+#define BCBEAR                  __SYSREGC(0xc0002020, u32)      /* bus error address reg */
+
+/* system bus controller registers */
+#define SBBASE(X)               __SYSREG(0xd8c00100 + (X) * 0x10, u32)  /* SBC base addr regs */
+#define SBBASE_BE               0x00000001      /* bank enable */
+#define SBBASE_BAM              0x0000fffe      /* bank address mask [31:17] */
+#define SBBASE_BBA              0xfffe0000      /* bank base address [31:17] */
+
+#define SBCNTRL0(X)             __SYSREG(0xd8c00200 + (X) * 0x10, u32)  /* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH            0x00000f00      /* write enable hold */
+#define SBCNTRL0_REH            0x0000f000      /* read enable hold */
+#define SBCNTRL0_RWH            0x000f0000      /* SRW signal hold */
+#define SBCNTRL0_CSH            0x00f00000      /* chip select hold */
+#define SBCNTRL0_DAH            0x0f000000      /* data hold */
+#define SBCNTRL0_ADH            0xf0000000      /* address hold */
+
+#define SBCNTRL1(X)             __SYSREG(0xd8c00204 + (X) * 0x10, u32)  /* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED            0x00000f00      /* write enable delay */
+#define SBCNTRL1_RED            0x0000f000      /* read enable delay */
+#define SBCNTRL1_RWD            0x000f0000      /* SRW signal delay */
+#define SBCNTRL1_ASW            0x00f00000      /* address strobe width */
+#define SBCNTRL1_CSD            0x0f000000      /* chip select delay */
+#define SBCNTRL1_ASD            0xf0000000      /* address strobe delay */
+
+#define SBCNTRL2(X)             __SYSREG(0xd8c00208 + (X) * 0x10, u32)  /* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC             0x000000ff      /* wait count */
+#define SBCNTRL2_BWC            0x00000f00      /* burst wait count */
+#define SBCNTRL2_WM             0x01000000      /* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT   0x00000000      /* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE   0x01000000      /* - handshake access */
+#define SBCNTRL2_BM             0x02000000      /* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC        0x00000000      /* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC       0x02000000      /* - asynchronous mode */
+#define SBCNTRL2_BW             0x04000000      /* bus width */
+#define SBCNTRL2_BW_32          0x00000000      /* - 32 bits */
+#define SBCNTRL2_BW_16          0x04000000      /* - 16 bits */
+#define SBCNTRL2_RWINV          0x08000000      /* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM     0x00000000      /* - normal (read high) */
+#define SBCNTRL2_RWINV_INV      0x08000000      /* - inverted (read low) */
+#define SBCNTRL2_BT             0x70000000      /* bus type setting */
+#define SBCNTRL2_BT_SRAM        0x00000000      /* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX       0x00000000      /* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM        0x00000000      /* - burst ROM interface */
+#define SBCNTRL2_BTSE           0x80000000      /* burst enable */
+
+/* memory bus controller */
+#define SDBASE(X)               __SYSREG(0xda000008 + (X) * 0x4, u32)   /* MBC base addr regs */
+#define SDBASE_CE               0x00000001      /* chip enable */
+#define SDBASE_CBAM             0x0000fff0      /* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT       16
+#define SDBASE_CBA              0xfff00000      /* chip base address [31:20] */
+
+#define SDRAMBUS                __SYSREG(0xda000000, u32)       /* bus mode control reg */
+#define SDRAMBUS_REFEN          0x00000004      /* refresh enable */
+#define SDRAMBUS_TRC            0x00000018      /* refresh command delay time */
+#define SDRAMBUS_BSTPT          0x00000020      /* burst stop command enable */
+#define SDRAMBUS_PONSEQ         0x00000040      /* power on sequence */
+#define SDRAMBUS_SELFREQ        0x00000080      /* self-refresh mode request */
+#define SDRAMBUS_SELFON         0x00000100      /* self-refresh mode on */
+#define SDRAMBUS_SIZE           0x00030000      /* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit    0x00010000      /* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit   0x00020000      /* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit   0x00030000      /* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT       0x000c0000      /* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM         0x00300000      /* refresh command number */
+#define SDRAMBUS_BSTWAIT        0x00c00000      /* burst stop command cycle */
+#define SDRAMBUS_SETWAIT        0x03000000      /* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT        0x0c000000      /* precharge command cycle */
+#define SDRAMBUS_RASLATE        0x30000000      /* RAS latency */
+#define SDRAMBUS_CASLATE        0xc0000000      /* CAS latency */
+
+#define SDREFCNT                __SYSREG(0xda000004, u32)       /* refresh period reg */
+#define SDREFCNT_PERI           0x00000fff      /* refresh period */
+
+#define SDSHDW                  __SYSREG(0xda000010, u32)       /* test reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/arch/mn10300/include/asm/byteorder.h b/arch/mn10300/include/asm/byteorder.h
new file mode 100644
index 000000000000..5dd0bdd9feee
--- /dev/null
+++ b/arch/mn10300/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h
new file mode 100644
index 000000000000..e03cfa2e997e
--- /dev/null
+++ b/arch/mn10300/include/asm/cache.h
@@ -0,0 +1,54 @@
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/cpu-regs.h>
+#include <proc/cache.h>
+
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY      (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY      L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ *   - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+        __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+                 (ENTRY) * L1_CACHE_BYTES, u32)
+
+#define DCACHE_PURGE_WAY0(ENTRY) \
+        __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+        __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+        __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+        __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+        __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY)   \
+        __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+        __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY)   \
+        __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
new file mode 100644
index 000000000000..2db746a251f8
--- /dev/null
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -0,0 +1,116 @@
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all()                       do {} while (0)
+#define flush_cache_mm(mm)                      do {} while (0)
+#define flush_cache_dup_mm(mm)                  do {} while (0)
+#define flush_cache_range(mm, start, end)       do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn)      do {} while (0)
+#define flush_cache_vmap(start, end)            do {} while (0)
+#define flush_cache_vunmap(start, end)          do {} while (0)
+#define flush_dcache_page(page)                 do {} while (0)
+#define flush_dcache_mmap_lock(mapping)         do {} while (0)
+#define flush_dcache_mmap_unlock(mapping)       do {} while (0)
+
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end)          do {} while (0)
+#define flush_icache_page(vma, pg)              do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+        flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+        do {                                    \
+                memcpy(dst, src, len);          \
+                flush_icache_page(vma, page);   \
+        } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+        memcpy(dst, src, len)
+
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush()                          do {} while (0)
+#define mn10300_dcache_flush_page(start)                do {} while (0)
+#define mn10300_dcache_flush_range(start, end)          do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)        do {} while (0)
+#define mn10300_dcache_flush_inv()                      mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+        mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+        mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+        mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv()                            do {} while (0)
+#define mn10300_dcache_inv()                            do {} while (0)
+#define mn10300_dcache_inv_page(start)                  do {} while (0)
+#define mn10300_dcache_inv_range(start, end)            do {} while (0)
+#define mn10300_dcache_inv_range2(start, size)          do {} while (0)
+#define mn10300_dcache_flush()                          do {} while (0)
+#define mn10300_dcache_flush_inv_page(start)            do {} while (0)
+#define mn10300_dcache_flush_inv()                      do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end)      do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size)    do {} while (0)
+#define mn10300_dcache_flush_page(start)                do {} while (0)
+#define mn10300_dcache_flush_range(start, end)          do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)        do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h
new file mode 100644
index 000000000000..9fb2a8d8826a
--- /dev/null
+++ b/arch/mn10300/include/asm/checksum.h
@@ -0,0 +1,86 @@
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+                                        int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+                                          int len, __wsum sum,
+                                          int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+                                __wsum sum);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+        asm(
+                "       add     %1,%0           \n"
+                "       addc    0xffff,%0       \n"
+                : "=r" (sum)
+                : "r" (sum << 16), "0" (sum & 0xffff0000)
+                : "cc"
+            );
+        return (~sum) >> 16;
+}
+
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+                                        unsigned long daddr,
+                                        unsigned short len,
+                                        unsigned short proto,
+                                        __wsum sum)
+{
+        __wsum tmp;
+
+        tmp = (__wsum) ntohs(len) << 16;
+        tmp += (__wsum) proto << 8;
+
+        asm(
+                "       add     %1,%0           \n"
+                "       addc    %2,%0           \n"
+                "       addc    %3,%0           \n"
+                "       addc    0,%0            \n"
+                : "=r" (sum)
+                : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+                : "cc"
+            );
+        return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+                                        unsigned long daddr,
+                                        unsigned short len,
+                                        unsigned short proto,
+                                        __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#undef _HAVE_ARCH_IPV6_CSUM
+
+/*
+ *      Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+                                    __wsum sum, int *err_ptr);
+
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h
new file mode 100644
index 000000000000..757e9b5388ea
--- /dev/null
+++ b/arch/mn10300/include/asm/cpu-regs.h
@@ -0,0 +1,290 @@
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+
+/* CPU registers */
+#define EPSW_FLAG_Z             0x00000001      /* zero flag */
+#define EPSW_FLAG_N             0x00000002      /* negative flag */
+#define EPSW_FLAG_C             0x00000004      /* carry flag */
+#define EPSW_FLAG_V             0x00000008      /* overflow flag */
+#define EPSW_IM                 0x00000700      /* interrupt mode */
+#define EPSW_IM_0               0x00000000      /* interrupt mode 0 */
+#define EPSW_IM_1               0x00000100      /* interrupt mode 1 */
+#define EPSW_IM_2               0x00000200      /* interrupt mode 2 */
+#define EPSW_IM_3               0x00000300      /* interrupt mode 3 */
+#define EPSW_IM_4               0x00000400      /* interrupt mode 4 */
+#define EPSW_IM_5               0x00000500      /* interrupt mode 5 */
+#define EPSW_IM_6               0x00000600      /* interrupt mode 6 */
+#define EPSW_IM_7               0x00000700      /* interrupt mode 7 */
+#define EPSW_IE                 0x00000800      /* interrupt enable */
+#define EPSW_S                  0x00003000      /* software auxilliary bits */
+#define EPSW_T                  0x00008000      /* trace enable */
+#define EPSW_nSL                0x00010000      /* not supervisor level */
+#define EPSW_NMID               0x00020000      /* nonmaskable interrupt disable */
+#define EPSW_nAR                0x00040000      /* register bank control */
+#define EPSW_ML                 0x00080000      /* monitor level */
+#define EPSW_FE                 0x00100000      /* FPU enable */
+
+/* FPU registers */
+#define FPCR_EF_I               0x00000001      /* inexact result FPU exception flag */
+#define FPCR_EF_U               0x00000002      /* underflow FPU exception flag */
+#define FPCR_EF_O               0x00000004      /* overflow FPU exception flag */
+#define FPCR_EF_Z               0x00000008      /* zero divide FPU exception flag */
+#define FPCR_EF_V               0x00000010      /* invalid operand FPU exception flag */
+#define FPCR_EE_I               0x00000020      /* inexact result FPU exception enable */
+#define FPCR_EE_U               0x00000040      /* underflow FPU exception enable */
+#define FPCR_EE_O               0x00000080      /* overflow FPU exception enable */
+#define FPCR_EE_Z               0x00000100      /* zero divide FPU exception enable */
+#define FPCR_EE_V               0x00000200      /* invalid operand FPU exception enable */
+#define FPCR_EC_I               0x00000400      /* inexact result FPU exception cause */
+#define FPCR_EC_U               0x00000800      /* underflow FPU exception cause */
+#define FPCR_EC_O               0x00001000      /* overflow FPU exception cause */
+#define FPCR_EC_Z               0x00002000      /* zero divide FPU exception cause */
+#define FPCR_EC_V               0x00004000      /* invalid operand FPU exception cause */
+#define FPCR_RM                 0x00030000      /* rounding mode */
+#define FPCR_RM_NEAREST         0x00000000      /* - round to nearest value */
+#define FPCR_FCC_U              0x00040000      /* FPU unordered condition code */
+#define FPCR_FCC_E              0x00080000      /* FPU equal condition code */
+#define FPCR_FCC_G              0x00100000      /* FPU greater than condition code */
+#define FPCR_FCC_L              0x00200000      /* FPU less than condition code */
+#define FPCR_INIT               0x00000000      /* no exceptions, rounding to nearest */
+
+/* CPU control registers */
+#define CPUP                    __SYSREG(0xc0000020, u16)       /* CPU pipeline register */
+#define CPUP_DWBD               0x0020          /* write buffer disable flag */
+#define CPUP_IPFD               0x0040          /* instruction prefetch disable flag */
+#define CPUP_EXM                0x0080          /* exception operation mode */
+#define CPUP_EXM_AM33V1         0x0000          /* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2         0x0080          /* - AM33 v2 exception mode */
+
+#define CPUM                    __SYSREG(0xc0000040, u16)       /* CPU mode register */
+#define CPUM_SLEEP              0x0004          /* set to enter sleep state */
+#define CPUM_HALT               0x0008          /* set to enter halt state */
+#define CPUM_STOP               0x0010          /* set to enter stop state */
+
+#define CPUREV                  __SYSREGC(0xc0000050, u32)      /* CPU revision register */
+#define CPUREV_TYPE             0x0000000f      /* CPU type */
+#define CPUREV_TYPE_S           0
+#define CPUREV_TYPE_AM33V1      0x00000000      /* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2      0x00000001      /* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1      0x00000002      /* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION         0x000000f0      /* CPU revision */
+#define CPUREV_REVISION_S       4
+#define CPUREV_ICWAY            0x00000f00      /* number of instruction cache ways */
+#define CPUREV_ICWAY_S          8
+#define CPUREV_ICSIZE           0x0000f000      /* instruction cache way size */
+#define CPUREV_ICSIZE_S         12
+#define CPUREV_DCWAY            0x000f0000      /* number of data cache ways */
+#define CPUREV_DCWAY_S          16
+#define CPUREV_DCSIZE           0x00f00000      /* data cache way size */
+#define CPUREV_DCSIZE_S         20
+#define CPUREV_FPUTYPE          0x0f000000      /* FPU core type */
+#define CPUREV_FPUTYPE_NONE     0x00000000      /* - no FPU core implemented */
+#define CPUREV_OCDCTG           0xf0000000      /* on-chip debug function category */
+
+#define DCR                     __SYSREG(0xc0000030, u16)       /* Debug control register */
+
+/* interrupt/exception control registers */
+#define IVAR0                   __SYSREG(0xc0000000, u16)       /* interrupt vector 0 */
+#define IVAR1                   __SYSREG(0xc0000004, u16)       /* interrupt vector 1 */
+#define IVAR2                   __SYSREG(0xc0000008, u16)       /* interrupt vector 2 */
+#define IVAR3                   __SYSREG(0xc000000c, u16)       /* interrupt vector 3 */
+#define IVAR4                   __SYSREG(0xc0000010, u16)       /* interrupt vector 4 */
+#define IVAR5                   __SYSREG(0xc0000014, u16)       /* interrupt vector 5 */
+#define IVAR6                   __SYSREG(0xc0000018, u16)       /* interrupt vector 6 */
+
+#define TBR                     __SYSREG(0xc0000024, u32)       /* Trap table base */
+#define TBR_TB                  0xff000000      /* table base address bits 31-24 */
+#define TBR_INT_CODE            0x00ffffff      /* interrupt code */
+
+#define DEAR                    __SYSREG(0xc0000038, u32)       /* Data access exception address */
+
+#define sISR                    __SYSREG(0xc0000044, u32)       /* Supervisor interrupt status */
+#define sISR_IRQICE             0x00000001      /* ICE interrupt */
+#define sISR_ISTEP              0x00000002      /* single step interrupt */
+#define sISR_MISSA              0x00000004      /* memory access address misalignment fault */
+#define sISR_UNIMP              0x00000008      /* unimplemented instruction execution fault */
+#define sISR_PIEXE              0x00000010      /* program interrupt */
+#define sISR_MEMERR             0x00000020      /* illegal memory access fault */
+#define sISR_IBREAK             0x00000040      /* instraction break interrupt */
+#define sISR_DBSRL              0x00000080      /* debug serial interrupt */
+#define sISR_PERIDB             0x00000100      /* peripheral debug interrupt */
+#define sISR_EXUNIMP            0x00000200      /* unimplemented ex-instruction execution fault */
+#define sISR_OBREAK             0x00000400      /* operand break interrupt */
+#define sISR_PRIV               0x00000800      /* privileged instruction execution fault */
+#define sISR_BUSERR             0x00001000      /* bus error fault */
+#define sISR_DBLFT              0x00002000      /* double fault */
+#define sISR_DBG                0x00008000      /* debug reserved interrupt */
+#define sISR_ITMISS             0x00010000      /* instruction TLB miss */
+#define sISR_DTMISS             0x00020000      /* data TLB miss */
+#define sISR_ITEX               0x00040000      /* instruction TLB access exception */
+#define sISR_DTEX               0x00080000      /* data TLB access exception */
+#define sISR_ILGIA              0x00100000      /* illegal instruction access exception */
+#define sISR_ILGDA              0x00200000      /* illegal data access exception */
+#define sISR_IOIA               0x00400000      /* internal I/O space instruction access excep */
+#define sISR_PRIVA              0x00800000      /* privileged space instruction access excep */
+#define sISR_PRIDA              0x01000000      /* privileged space data access excep */
+#define sISR_DISA               0x02000000      /* data space instruction access excep */
+#define sISR_SYSC               0x04000000      /* system call instruction excep */
+#define sISR_FPUD               0x08000000      /* FPU disabled excep */
+#define sISR_FPUUI              0x10000000      /* FPU unimplemented instruction excep */
+#define sISR_FPUOP              0x20000000      /* FPU operation excep */
+#define sISR_NE                 0x80000000      /* multiple synchronous exceptions excep */
+
+/* cache control registers */
+#define CHCTR                   __SYSREG(0xc0000070, u16)       /* cache control */
+#define CHCTR_ICEN              0x0001          /* instruction cache enable */
+#define CHCTR_DCEN              0x0002          /* data cache enable */
+#define CHCTR_ICBUSY            0x0004          /* instruction cache busy */
+#define CHCTR_DCBUSY            0x0008          /* data cache busy */
+#define CHCTR_ICINV             0x0010          /* instruction cache invalidate */
+#define CHCTR_DCINV             0x0020          /* data cache invalidate */
+#define CHCTR_DCWTMD            0x0040          /* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK     0x0000          /* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH  0x0040          /* - write through mode */
+#define CHCTR_DCALMD            0x0080          /* data cache allocation mode */
+#define CHCTR_ICWMD             0x0f00          /* instruction cache way mode */
+#define CHCTR_DCWMD             0xf000          /* data cache way mode */
+
+/* MMU control registers */
+#define MMUCTR                  __SYSREG(0xc0000090, u32)       /* MMU control register */
+#define MMUCTR_IRP              0x0000003f      /* instruction TLB replace pointer */
+#define MMUCTR_ITE              0x00000040      /* instruction TLB enable */
+#define MMUCTR_IIV              0x00000080      /* instruction TLB invalidate */
+#define MMUCTR_ITL              0x00000700      /* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK       0x00000000      /* - no lock */
+#define MMUCTR_ITL_LOCK0        0x00000100      /* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1      0x00000200      /* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3      0x00000300      /* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7      0x00000400      /* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15     0x00000500      /* - entry 0-15 locked */
+#define MMUCTR_CE               0x00008000      /* cacheable bit enable */
+#define MMUCTR_DRP              0x003f0000      /* data TLB replace pointer */
+#define MMUCTR_DTE              0x00400000      /* data TLB enable */
+#define MMUCTR_DIV              0x00800000      /* data TLB invalidate */
+#define MMUCTR_DTL              0x07000000      /* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK       0x00000000      /* - no lock */
+#define MMUCTR_DTL_LOCK0        0x01000000      /* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1      0x02000000      /* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3      0x03000000      /* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7      0x04000000      /* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15     0x05000000      /* - entry 0-15 locked */
+
+#define PIDR                    __SYSREG(0xc0000094, u16)       /* PID register */
+#define PIDR_PID                0x00ff          /* process identifier */
+
+#define PTBR                    __SYSREG(0xc0000098, unsigned long) /* Page table base register */
+
+#define IPTEL                   __SYSREG(0xc00000a0, u32)       /* instruction TLB entry */
+#define DPTEL                   __SYSREG(0xc00000b0, u32)       /* data TLB entry */
+#define xPTEL_V                 0x00000001      /* TLB entry valid */
+#define xPTEL_UNUSED1           0x00000002      /* unused bit */
+#define xPTEL_UNUSED2           0x00000004      /* unused bit */
+#define xPTEL_C                 0x00000008      /* cached if set */
+#define xPTEL_PV                0x00000010      /* page valid */
+#define xPTEL_D                 0x00000020      /* dirty */
+#define xPTEL_PR                0x000001c0      /* page protection */
+#define xPTEL_PR_ROK            0x00000000      /* - R/O kernel */
+#define xPTEL_PR_RWK            0x00000100      /* - R/W kernel */
+#define xPTEL_PR_ROK_ROU        0x00000080      /* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU        0x00000180      /* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU        0x000001c0      /* - R/W kernel and R/W user */
+#define xPTEL_G                 0x00000200      /* global (use PID if 0) */
+#define xPTEL_PS                0x00000c00      /* page size */
+#define xPTEL_PS_4Kb            0x00000000      /* - 4Kb page */
+#define xPTEL_PS_128Kb          0x00000400      /* - 128Kb page */
+#define xPTEL_PS_1Kb            0x00000800      /* - 1Kb page */
+#define xPTEL_PS_4Mb            0x00000c00      /* - 4Mb page */
+#define xPTEL_PPN               0xfffff006      /* physical page number */
+
+#define xPTEL_V_BIT             0       /* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT       1
+#define xPTEL_UNUSED2_BIT       2
+#define xPTEL_C_BIT             3
+#define xPTEL_PV_BIT            4
+#define xPTEL_D_BIT             5
+#define xPTEL_G_BIT             9
+
+#define IPTEU                   __SYSREG(0xc00000a4, u32)       /* instruction TLB virtual addr */
+#define DPTEU                   __SYSREG(0xc00000b4, u32)       /* data TLB virtual addr */
+#define xPTEU_VPN               0xfffffc00      /* virtual page number */
+#define xPTEU_PID               0x000000ff      /* process identifier to which applicable */
+
+#define IPTEL2                  __SYSREG(0xc00000a8, u32)       /* instruction TLB entry */
+#define DPTEL2                  __SYSREG(0xc00000b8, u32)       /* data TLB entry */
+#define xPTEL2_V                0x00000001      /* TLB entry valid */
+#define xPTEL2_C                0x00000002      /* cacheable */
+#define xPTEL2_PV               0x00000004      /* page valid */
+#define xPTEL2_D                0x00000008      /* dirty */
+#define xPTEL2_PR               0x00000070      /* page protection */
+#define xPTEL2_PR_ROK           0x00000000      /* - R/O kernel */
+#define xPTEL2_PR_RWK           0x00000040      /* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU       0x00000020      /* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU       0x00000060      /* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU       0x00000070      /* - R/W kernel and R/W user */
+#define xPTEL2_G                0x00000080      /* global (use PID if 0) */
+#define xPTEL2_PS               0x00000300      /* page size */
+#define xPTEL2_PS_4Kb           0x00000000      /* - 4Kb page */
+#define xPTEL2_PS_128Kb         0x00000100      /* - 128Kb page */
+#define xPTEL2_PS_1Kb           0x00000200      /* - 1Kb page */
+#define xPTEL2_PS_4Mb           0x00000300      /* - 4Mb page */
+#define xPTEL2_PPN              0xfffffc00      /* physical page number */
+
+#define MMUFCR                  __SYSREGC(0xc000009c, u32)      /* MMU exception cause */
+#define MMUFCR_IFC              __SYSREGC(0xc000009c, u16)      /* MMU instruction excep cause */
+#define MMUFCR_DFC              __SYSREGC(0xc000009e, u16)      /* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS      0x0001          /* TLB miss flag */
+#define MMUFCR_xFC_INITWR       0x0002          /* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL      0x0004          /* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL     0x0008          /* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS       0x0010          /* access level flag */
+#define MMUFCR_xFC_ACCESS_USR   0x0000          /* - user mode */
+#define MMUFCR_xFC_ACCESS_SR    0x0010          /* - supervisor mode */
+#define MMUFCR_xFC_TYPE         0x0020          /* access type flag */
+#define MMUFCR_xFC_TYPE_READ    0x0000          /* - read */
+#define MMUFCR_xFC_TYPE_WRITE   0x0020          /* - write */
+#define MMUFCR_xFC_PR           0x01c0          /* page protection flag */
+#define MMUFCR_xFC_PR_ROK       0x0000          /* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK       0x0100          /* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU   0x0080          /* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU   0x0180          /* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU   0x01c0          /* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR      0x0200          /* illegal address excep flag */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_CPU_REGS_H */
diff --git a/arch/mn10300/include/asm/cputime.h b/arch/mn10300/include/asm/cputime.h
new file mode 100644
index 000000000000..6d68ad7e0ea3
--- /dev/null
+++ b/arch/mn10300/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/mn10300/include/asm/current.h b/arch/mn10300/include/asm/current.h
new file mode 100644
index 000000000000..ca6027d83743
--- /dev/null
+++ b/arch/mn10300/include/asm/current.h
@@ -0,0 +1,37 @@
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+
+register struct task_struct *const current asm("e2") __attribute__((used));
+
+#define get_current() current
+
+extern struct task_struct *__current;
+
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+        return current_thread_info()->task;
+}
+
+#define current get_current()
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/mn10300/include/asm/delay.h b/arch/mn10300/include/asm/delay.h
new file mode 100644
index 000000000000..34517b359399
--- /dev/null
+++ b/arch/mn10300/include/asm/delay.h
@@ -0,0 +1,19 @@
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/mn10300/include/asm/device.h b/arch/mn10300/include/asm/device.h
new file mode 100644
index 000000000000..f0a4c256403b
--- /dev/null
+++ b/arch/mn10300/include/asm/device.h
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h
new file mode 100644
index 000000000000..3a8329b3e869
--- /dev/null
+++ b/arch/mn10300/include/asm/div64.h
@@ -0,0 +1,100 @@
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+
+#include <linux/types.h>
+
+extern void ____unhandled_size_in_do_div___(void);
+
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ *   through the MDR register
+ */
+#define do_div(n, base)                                                 \
+({                                                                      \
+        unsigned __rem = 0;                                             \
+        if (sizeof(n) <= 4) {                                           \
+                asm("mov        %1,mdr  \n"                             \
+                    "divu       %2,%0   \n"                             \
+                    "mov        mdr,%1  \n"                             \
+                    : "+r"(n), "=d"(__rem)                              \
+                    : "r"(base), "1"(__rem)                             \
+                    : "cc"                                              \
+                    );                                                  \
+        } else if (sizeof(n) <= 8) {                                    \
+                union {                                                 \
+                        unsigned long long l;                           \
+                        u32 w[2];                                       \
+                } __quot;                                               \
+                __quot.l = n;                                           \
+                asm("mov        %0,mdr  \n"     /* MDR = 0 */           \
+                    "divu       %3,%1   \n"                             \
+                    /* __quot.MSL = __div.MSL / base, */                \
+                    /* MDR = MDR:__div.MSL % base */                    \
+                    "divu       %3,%2   \n"                             \
+                    /* __quot.LSL = MDR:__div.LSL / base, */            \
+                    /* MDR = MDR:__div.LSL % base */                    \
+                    "mov        mdr,%0  \n"                             \
+                    : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
+                    : "r"(base), "0"(__rem), "1"(__quot.w[1]),          \
+                      "2"(__quot.w[0])                                  \
+                    : "cc"                                              \
+                    );                                                  \
+                n = __quot.l;                                           \
+        } else {                                                        \
+                ____unhandled_size_in_do_div___();                      \
+        }                                                               \
+        __rem;                                                          \
+})
+
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+        unsigned result;
+
+        asm("mulu       %2,%0   \n"     /* MDR:val = val*mult */
+            "divu       %3,%0   \n"     /* val = MDR:val/div;
+                                         * MDR = MDR:val%div */
+            : "=r"(result)
+            : "0"(val), "ir"(mult), "r"(div)
+            );
+
+        return result;
+}
+
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+        signed result;
+
+        asm("mul        %2,%0   \n"     /* MDR:val = val*mult */
+            "div        %3,%0   \n"     /* val = MDR:val/div;
+                                         * MDR = MDR:val%div */
+            : "=r"(result)
+            : "0"(val), "ir"(mult), "r"(div)
+            );
+
+        return result;
+}
+
+#endif /* _ASM_DIV64 */
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..ccae8f6c6326
--- /dev/null
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -0,0 +1,234 @@
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+                                dma_addr_t *dma_handle, int flag);
+
+extern void dma_free_coherent(struct device *dev, size_t size,
+                              void *vaddr, dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.  The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+                          enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+        mn10300_dcache_flush_inv();
+        return virt_to_bus(ptr);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call.  All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+                      enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ *       address/length pairs than there are SG table elements.  (for example
+ *       via virtual mapping capabilities) The routine returns the number of
+ *       addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+               enum dma_data_direction direction)
+{
+        struct scatterlist *sg;
+        int i;
+
+        BUG_ON(!valid_dma_direction(direction));
+        WARN_ON(nents == 0 || sglist[0].length == 0);
+
+        for_each_sg(sglist, sg, nents, i) {
+                BUG_ON(!sg_page(sg));
+
+                sg->dma_address = sg_phys(sg);
+        }
+
+        mn10300_dcache_flush_inv();
+        return nents;
+}
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+                  enum dma_data_direction direction)
+{
+        BUG_ON(!valid_dma_direction(direction));
+}
+
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+                        unsigned long offset, size_t size,
+                        enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+        return page_to_bus(page) + offset;
+}
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+                    enum dma_data_direction direction)
+{
+        BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so.  At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                             size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+                                size_t size, enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+                                   unsigned long offset, size_t size,
+                                   enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+                                 unsigned long offset, size_t size,
+                                 enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+                         int nelems, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+                            int nelems, enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+        return 0;
+}
+
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+         * guarantee allocations that must be within a tighter range than
+         * GFP_DMA
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+        return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+        if (!dev->dma_mask || !dma_supported(dev, mask))
+                return -EIO;
+
+        *dev->dma_mask = mask;
+        return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+        return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d)    (1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+                    enum dma_data_direction direction)
+{
+        mn10300_dcache_flush_inv();
+}
+
+#endif
diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h
new file mode 100644
index 000000000000..098df2e617ab
--- /dev/null
+++ b/arch/mn10300/include/asm/dma.h
@@ -0,0 +1,118 @@
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS         /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS         0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&dma_spin_lock, flags);
+        return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+        spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+        return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h
new file mode 100644
index 000000000000..58a199da0f4a
--- /dev/null
+++ b/arch/mn10300/include/asm/dmactl-regs.h
@@ -0,0 +1,101 @@
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define DMxCTR(N)               __SYSREG(0xd2000000 + ((N) * 0x100), u32)       /* control reg */
+#define DMxCTR_BG               0x0000001f      /* transfer request source */
+#define DMxCTR_BG_SOFT          0x00000000      /* - software source */
+#define DMxCTR_BG_SC0TX         0x00000002      /* - serial port 0 transmission */
+#define DMxCTR_BG_SC0RX         0x00000003      /* - serial port 0 reception */
+#define DMxCTR_BG_SC1TX         0x00000004      /* - serial port 1 transmission */
+#define DMxCTR_BG_SC1RX         0x00000005      /* - serial port 1 reception */
+#define DMxCTR_BG_SC2TX         0x00000006      /* - serial port 2 transmission */
+#define DMxCTR_BG_SC2RX         0x00000007      /* - serial port 2 reception */
+#define DMxCTR_BG_TM0UFLOW      0x00000008      /* - timer 0 underflow */
+#define DMxCTR_BG_TM1UFLOW      0x00000009      /* - timer 1 underflow */
+#define DMxCTR_BG_TM2UFLOW      0x0000000a      /* - timer 2 underflow */
+#define DMxCTR_BG_TM3UFLOW      0x0000000b      /* - timer 3 underflow */
+#define DMxCTR_BG_TM6ACMPCAP    0x0000000c      /* - timer 6A compare/capture */
+#define DMxCTR_BG_AFE           0x0000000d      /* - analogue front-end interrupt source */
+#define DMxCTR_BG_ADC           0x0000000e      /* - A/D conversion end interrupt source */
+#define DMxCTR_BG_IRDA          0x0000000f      /* - IrDA interrupt source */
+#define DMxCTR_BG_RTC           0x00000010      /* - RTC interrupt source */
+#define DMxCTR_BG_XIRQ0         0x00000011      /* - XIRQ0 pin interrupt source */
+#define DMxCTR_BG_XIRQ1         0x00000012      /* - XIRQ1 pin interrupt source */
+#define DMxCTR_BG_XDMR0         0x00000013      /* - external request 0 source (XDMR0 pin) */
+#define DMxCTR_BG_XDMR1         0x00000014      /* - external request 1 source (XDMR1 pin) */
+#define DMxCTR_SAM              0x000000e0      /* DMA transfer src addr mode */
+#define DMxCTR_SAM_INCR         0x00000000      /* - increment */
+#define DMxCTR_SAM_DECR         0x00000020      /* - decrement */
+#define DMxCTR_SAM_FIXED        0x00000040      /* - fixed */
+#define DMxCTR_DAM              0x00000000      /* DMA transfer dest addr mode */
+#define DMxCTR_DAM_INCR         0x00000000      /* - increment */
+#define DMxCTR_DAM_DECR         0x00000100      /* - decrement */
+#define DMxCTR_DAM_FIXED        0x00000200      /* - fixed */
+#define DMxCTR_TM               0x00001800      /* DMA transfer mode */
+#define DMxCTR_TM_BATCH         0x00000000      /* - batch transfer */
+#define DMxCTR_TM_INTERM        0x00001000      /* - intermittent transfer */
+#define DMxCTR_UT               0x00006000      /* DMA transfer unit */
+#define DMxCTR_UT_1             0x00000000      /* - 1 byte */
+#define DMxCTR_UT_2             0x00002000      /* - 2 byte */
+#define DMxCTR_UT_4             0x00004000      /* - 4 byte */
+#define DMxCTR_UT_16            0x00006000      /* - 16 byte */
+#define DMxCTR_TEN              0x00010000      /* DMA channel transfer enable */
+#define DMxCTR_RQM              0x00060000      /* external request input source mode */
+#define DMxCTR_RQM_FALLEDGE     0x00000000      /* - falling edge */
+#define DMxCTR_RQM_RISEEDGE     0x00020000      /* - rising edge */
+#define DMxCTR_RQM_LOLEVEL      0x00040000      /* - low level */
+#define DMxCTR_RQM_HILEVEL      0x00060000      /* - high level */
+#define DMxCTR_RQF              0x01000000      /* DMA transfer request flag */
+#define DMxCTR_XEND             0x80000000      /* DMA transfer end flag */
+
+#define DMxSRC(N)               __SYSREG(0xd2000004 + ((N) * 0x100), u32)       /* control reg */
+
+#define DMxDST(N)               __SYSREG(0xd2000008 + ((N) * 0x100), u32)       /* src addr reg */
+
+#define DMxSIZ(N)               __SYSREG(0xd200000c + ((N) * 0x100), u32)       /* dest addr reg */
+#define DMxSIZ_CT               0x000fffff      /* number of bytes to transfer */
+
+#define DMxCYC(N)               __SYSREG(0xd2000010 + ((N) * 0x100), u32)       /* intermittent
+                                                                                 * size reg */
+#define DMxCYC_CYC              0x000000ff      /* number of interrmittent transfers -1 */
+
+#define DM0IRQ                  16              /* DMA channel 0 complete IRQ */
+#define DM1IRQ                  17              /* DMA channel 1 complete IRQ */
+#define DM2IRQ                  18              /* DMA channel 2 complete IRQ */
+#define DM3IRQ                  19              /* DMA channel 3 complete IRQ */
+
+#define DM0ICR                  GxICR(DM0IRQ)   /* DMA channel 0 complete intr ctrl reg */
+#define DM1ICR                  GxICR(DM0IR1)   /* DMA channel 1 complete intr ctrl reg */
+#define DM2ICR                  GxICR(DM0IR2)   /* DMA channel 2 complete intr ctrl reg */
+#define DM3ICR                  GxICR(DM0IR3)   /* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+        u32             ctr;
+        const void      *src;
+        void            *dst;
+        u32             siz;
+        u32             cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */
diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h
new file mode 100644
index 000000000000..bf09f8bb392e
--- /dev/null
+++ b/arch/mn10300/include/asm/elf.h
@@ -0,0 +1,147 @@
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE          0       /* No reloc.  */
+#define R_MN10300_32            1       /* Direct 32 bit.  */
+#define R_MN10300_16            2       /* Direct 16 bit.  */
+#define R_MN10300_8             3       /* Direct 8 bit.  */
+#define R_MN10300_PCREL32       4       /* PC-relative 32-bit.  */
+#define R_MN10300_PCREL16       5       /* PC-relative 16-bit signed.  */
+#define R_MN10300_PCREL8        6       /* PC-relative 8-bit signed.  */
+#define R_MN10300_24            9       /* Direct 24 bit.  */
+#define R_MN10300_RELATIVE      23      /* Adjust by program base.  */
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+
+typedef struct {
+        elf_fpreg_t     fpregs[ELF_NFPREG];
+        u_int32_t       fpcr;
+} elf_fpregset_t;
+
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+        (((x)->e_machine == EM_CYGNUS_MN10300) ||       \
+         ((x)->e_machine == EM_MN10300))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+#define ELF_DATA        ELFDATA2LSB
+#define ELF_ARCH        EM_MN10300
+
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr)                                    \
+do {                                                                    \
+        struct pt_regs *_ur = current->thread.uregs;                    \
+        _ur->a3   = 0;  _ur->a2   = 0;  _ur->d3   = 0;  _ur->d2   = 0;  \
+        _ur->mcvf = 0;  _ur->mcrl = 0;  _ur->mcrh = 0;  _ur->mdrq = 0;  \
+        _ur->e1   = 0;  _ur->e0   = 0;  _ur->e7   = 0;  _ur->e6   = 0;  \
+        _ur->e5   = 0;  _ur->e4   = 0;  _ur->e3   = 0;  _ur->e2   = 0;  \
+        _ur->lar  = 0;  _ur->lir  = 0;  _ur->mdr  = 0;                  \
+        _ur->a1   = 0;  _ur->a0   = 0;  _ur->d1   = 0;  _ur->d0   = 0;  \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE       4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE         0x04000000
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)        \
+do {                                            \
+        pr_reg[0]       = regs->a3;             \
+        pr_reg[1]       = regs->a2;             \
+        pr_reg[2]       = regs->d3;             \
+        pr_reg[3]       = regs->d2;             \
+        pr_reg[4]       = regs->mcvf;           \
+        pr_reg[5]       = regs->mcrl;           \
+        pr_reg[6]       = regs->mcrh;           \
+        pr_reg[7]       = regs->mdrq;           \
+        pr_reg[8]       = regs->e1;             \
+        pr_reg[9]       = regs->e0;             \
+        pr_reg[10]      = regs->e7;             \
+        pr_reg[11]      = regs->e6;             \
+        pr_reg[12]      = regs->e5;             \
+        pr_reg[13]      = regs->e4;             \
+        pr_reg[14]      = regs->e3;             \
+        pr_reg[15]      = regs->e2;             \
+        pr_reg[16]      = regs->sp;             \
+        pr_reg[17]      = regs->lar;            \
+        pr_reg[18]      = regs->lir;            \
+        pr_reg[19]      = regs->mdr;            \
+        pr_reg[20]      = regs->a1;             \
+        pr_reg[21]      = regs->a0;             \
+        pr_reg[22]      = regs->d1;             \
+        pr_reg[23]      = regs->d0;             \
+        pr_reg[24]      = regs->orig_d0;        \
+        pr_reg[25]      = regs->epsw;           \
+        pr_reg[26]      = regs->pc;             \
+} while (0);
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP       (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/arch/mn10300/include/asm/emergency-restart.h b/arch/mn10300/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3711bd9d50bd
--- /dev/null
+++ b/arch/mn10300/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/mn10300/include/asm/errno.h b/arch/mn10300/include/asm/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/arch/mn10300/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h
new file mode 100644
index 000000000000..fa16466ef3f9
--- /dev/null
+++ b/arch/mn10300/include/asm/exceptions.h
@@ -0,0 +1,121 @@
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+
+#include <linux/linkage.h>
+
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ *   (can use 0xF7)
+ */
+#define GDBSTUB_BKPT            0xFF
+
+#ifndef __ASSEMBLY__
+
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+        EXCEP_RESET             = 0x000000,     /* reset */
+
+        /* MMU exceptions */
+        EXCEP_ITLBMISS          = 0x000100,     /* instruction TLB miss */
+        EXCEP_DTLBMISS          = 0x000108,     /* data TLB miss */
+        EXCEP_IAERROR           = 0x000110,     /* instruction address */
+        EXCEP_DAERROR           = 0x000118,     /* data address */
+
+        /* system exceptions */
+        EXCEP_TRAP              = 0x000128,     /* program interrupt (PI instruction) */
+        EXCEP_ISTEP             = 0x000130,     /* single step */
+        EXCEP_IBREAK            = 0x000150,     /* instruction breakpoint */
+        EXCEP_OBREAK            = 0x000158,     /* operand breakpoint */
+        EXCEP_PRIVINS           = 0x000160,     /* privileged instruction execution */
+        EXCEP_UNIMPINS          = 0x000168,     /* unimplemented instruction execution */
+        EXCEP_UNIMPEXINS        = 0x000170,     /* unimplemented extended instruction execution */
+        EXCEP_MEMERR            = 0x000178,     /* illegal memory access */
+        EXCEP_MISALIGN          = 0x000180,     /* misalignment */
+        EXCEP_BUSERROR          = 0x000188,     /* bus error */
+        EXCEP_ILLINSACC         = 0x000190,     /* illegal instruction access */
+        EXCEP_ILLDATACC         = 0x000198,     /* illegal data access */
+        EXCEP_IOINSACC          = 0x0001a0,     /* I/O space instruction access */
+        EXCEP_PRIVINSACC        = 0x0001a8,     /* privileged space instruction access */
+        EXCEP_PRIVDATACC        = 0x0001b0,     /* privileged space data access */
+        EXCEP_DATINSACC         = 0x0001b8,     /* data space instruction access */
+        EXCEP_DOUBLE_FAULT      = 0x000200,     /* double fault */
+
+        /* FPU exceptions */
+        EXCEP_FPU_DISABLED      = 0x0001c0,     /* FPU disabled */
+        EXCEP_FPU_UNIMPINS      = 0x0001c8,     /* FPU unimplemented operation */
+        EXCEP_FPU_OPERATION     = 0x0001d0,     /* FPU operation */
+
+        /* interrupts */
+        EXCEP_WDT               = 0x000240,     /* watchdog timer overflow */
+        EXCEP_NMI               = 0x000248,     /* non-maskable interrupt */
+        EXCEP_IRQ_LEVEL0        = 0x000280,     /* level 0 maskable interrupt */
+        EXCEP_IRQ_LEVEL1        = 0x000288,     /* level 1 maskable interrupt */
+        EXCEP_IRQ_LEVEL2        = 0x000290,     /* level 2 maskable interrupt */
+        EXCEP_IRQ_LEVEL3        = 0x000298,     /* level 3 maskable interrupt */
+        EXCEP_IRQ_LEVEL4        = 0x0002a0,     /* level 4 maskable interrupt */
+        EXCEP_IRQ_LEVEL5        = 0x0002a8,     /* level 5 maskable interrupt */
+        EXCEP_IRQ_LEVEL6        = 0x0002b0,     /* level 6 maskable interrupt */
+
+        /* system calls */
+        EXCEP_SYSCALL0          = 0x000300,     /* system call 0 */
+        EXCEP_SYSCALL1          = 0x000308,     /* system call 1 */
+        EXCEP_SYSCALL2          = 0x000310,     /* system call 2 */
+        EXCEP_SYSCALL3          = 0x000318,     /* system call 3 */
+        EXCEP_SYSCALL4          = 0x000320,     /* system call 4 */
+        EXCEP_SYSCALL5          = 0x000328,     /* system call 5 */
+        EXCEP_SYSCALL6          = 0x000330,     /* system call 6 */
+        EXCEP_SYSCALL7          = 0x000338,     /* system call 7 */
+        EXCEP_SYSCALL8          = 0x000340,     /* system call 8 */
+        EXCEP_SYSCALL9          = 0x000348,     /* system call 9 */
+        EXCEP_SYSCALL10         = 0x000350,     /* system call 10 */
+        EXCEP_SYSCALL11         = 0x000358,     /* system call 11 */
+        EXCEP_SYSCALL12         = 0x000360,     /* system call 12 */
+        EXCEP_SYSCALL13         = 0x000368,     /* system call 13 */
+        EXCEP_SYSCALL14         = 0x000370,     /* system call 14 */
+        EXCEP_SYSCALL15         = 0x000378,     /* system call 15 */
+};
+
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+
+struct pt_regs;
+
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int  system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+                                               enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+
+extern void die(const char *, struct pt_regs *, enum exception_code)
+        ATTRIB_NORET;
+
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_EXCEPTIONS_H */
diff --git a/arch/mn10300/include/asm/fb.h b/arch/mn10300/include/asm/fb.h
new file mode 100644
index 000000000000..697b24a91e1a
--- /dev/null
+++ b/arch/mn10300/include/asm/fb.h
@@ -0,0 +1,23 @@
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+        return 0;
+}
+
+#endif /* _ASM_FB_H */
diff --git a/arch/mn10300/include/asm/fcntl.h b/arch/mn10300/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/mn10300/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h
new file mode 100644
index 000000000000..64a2b83a7a6a
--- /dev/null
+++ b/arch/mn10300/include/asm/fpu.h
@@ -0,0 +1,85 @@
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+#ifdef __KERNEL__
+
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+
+#define set_using_fpu(tsk)                              \
+do {                                                    \
+        (tsk)->thread.fpu_flags |= THREAD_USING_FPU;    \
+} while (0)
+
+#define clear_using_fpu(tsk)                            \
+do {                                                    \
+        (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU;   \
+} while (0)
+
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+
+#define unlazy_fpu(tsk)                                 \
+do {                                                    \
+        preempt_disable();                              \
+        if (fpu_state_owner == (tsk))                   \
+                fpu_save(&tsk->thread.fpu_state);       \
+        preempt_enable();                               \
+} while (0)
+
+#define exit_fpu()                              \
+do {                                            \
+        struct task_struct *__tsk = current;    \
+        preempt_disable();                      \
+        if (fpu_state_owner == __tsk)           \
+                fpu_state_owner = NULL;         \
+        preempt_enable();                       \
+} while (0)
+
+#define flush_fpu()                                     \
+do {                                                    \
+        struct task_struct *__tsk = current;            \
+        preempt_disable();                              \
+        if (fpu_state_owner == __tsk) {                 \
+                fpu_state_owner = NULL;                 \
+                __tsk->thread.uregs->epsw &= ~EPSW_FE;  \
+        }                                               \
+        preempt_enable();                               \
+        clear_using_fpu(__tsk);                         \
+} while (0)
+
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU  */
+
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc
new file mode 100644
index 000000000000..5b1949bdf039
--- /dev/null
+++ b/arch/mn10300/include/asm/frame.inc
@@ -0,0 +1,91 @@
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#define pi break
+
+#define fp a3
+
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+        add     -4,sp                           # next exception frame ptr save area
+        movm    [other],(sp)
+        mov     usp,a1
+        mov     a1,(sp)                         # USP in MOVM[other] dummy slot
+        movm    [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+        mov     sp,fp                           # FRAME pointer in A3
+        add     -12,sp                          # allow for calls to be made
+        mov     (__frame),a1
+        mov     a1,(REG_NEXT,fp)
+        mov     fp,(__frame)
+
+        and     ~EPSW_FE,epsw                   # disable the FPU inside the kernel
+
+        # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+        mov     (__current),e2
+#endif
+.endm
+
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+        # peel back the stack to the calling frame
+        # - this permits execve() to discard extra frames due to kernel syscalls
+        mov     (__frame),fp
+        mov     fp,sp
+        mov     (REG_NEXT,fp),d0                # userspace has regs->next == 0
+        mov     d0,(__frame)
+
+#ifndef CONFIG_MN10300_USING_JTAG
+        mov     (REG_EPSW,fp),d0
+        btst    EPSW_T,d0
+        beq     99f
+
+        or      EPSW_NMID,epsw
+        movhu   (DCR),d1
+        or      0x0001, d1
+        movhu   d1,(DCR)
+
+99:
+#endif
+        movm    (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+
+        # must restore usp even if returning to kernel space,
+        # when CONFIG_PREEMPT is enabled.
+        mov     (sp),a1                         # USP in MOVM[other] dummy slot
+        mov     a1,usp
+
+        movm    (sp),[other]
+        add     8,sp
+        rti
+
+.endm
+
+
+#endif /* _ASM_FRAME_INC */
diff --git a/arch/mn10300/include/asm/ftrace.h b/arch/mn10300/include/asm/ftrace.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/mn10300/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/mn10300/include/asm/futex.h b/arch/mn10300/include/asm/futex.h
new file mode 100644
index 000000000000..0b745828f42b
--- /dev/null
+++ b/arch/mn10300/include/asm/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h
new file mode 100644
index 000000000000..e5a6368559af
--- /dev/null
+++ b/arch/mn10300/include/asm/gdb-stub.h
@@ -0,0 +1,183 @@
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+#include <asm/exceptions.h>
+
+/*
+ * register ID numbers in GDB remote protocol
+ */
+
+#define GDB_REGID_PC            9
+#define GDB_REGID_FP            7
+#define GDB_REGID_SP            8
+
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS                 64
+
+#define GDB_FR_D0               (0 * 4)
+#define GDB_FR_D1               (1 * 4)
+#define GDB_FR_D2               (2 * 4)
+#define GDB_FR_D3               (3 * 4)
+#define GDB_FR_A0               (4 * 4)
+#define GDB_FR_A1               (5 * 4)
+#define GDB_FR_A2               (6 * 4)
+#define GDB_FR_A3               (7 * 4)
+
+#define GDB_FR_SP               (8 * 4)
+#define GDB_FR_PC               (9 * 4)
+#define GDB_FR_MDR              (10 * 4)
+#define GDB_FR_EPSW             (11 * 4)
+#define GDB_FR_LIR              (12 * 4)
+#define GDB_FR_LAR              (13 * 4)
+#define GDB_FR_MDRQ             (14 * 4)
+
+#define GDB_FR_E0               (15 * 4)
+#define GDB_FR_E1               (16 * 4)
+#define GDB_FR_E2               (17 * 4)
+#define GDB_FR_E3               (18 * 4)
+#define GDB_FR_E4               (19 * 4)
+#define GDB_FR_E5               (20 * 4)
+#define GDB_FR_E6               (21 * 4)
+#define GDB_FR_E7               (22 * 4)
+
+#define GDB_FR_SSP              (23 * 4)
+#define GDB_FR_MSP              (24 * 4)
+#define GDB_FR_USP              (25 * 4)
+#define GDB_FR_MCRH             (26 * 4)
+#define GDB_FR_MCRL             (27 * 4)
+#define GDB_FR_MCVF             (28 * 4)
+
+#define GDB_FR_FPCR             (29 * 4)
+#define GDB_FR_DUMMY0           (30 * 4)
+#define GDB_FR_DUMMY1           (31 * 4)
+
+#define GDB_FR_FS0              (32 * 4)
+
+#define GDB_FR_SIZE             (NUMREGS * 4)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+        /* saved main processor registers */
+        u32     d0, d1, d2, d3, a0, a1, a2, a3;
+        u32     sp, pc, mdr, epsw, lir, lar, mdrq;
+        u32     e0, e1, e2, e3, e4, e5, e6, e7;
+        u32     ssp, msp, usp, mcrh, mcrl, mcvf;
+
+        /* saved floating point registers */
+        u32     fpcr, _dummy0, _dummy1;
+        u32     fs0,  fs1,  fs2,  fs3,  fs4,  fs5,  fs6,  fs7;
+        u32     fs8,  fs9,  fs10, fs11, fs12, fs13, fs14, fs15;
+        u32     fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+        u32     fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int  gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int  gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache()   do {} while (0)
+#endif
+
+/* Used to prevent crashes in memory access */
+extern asmlinkage int  gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int  gdbstub_write_word(u32, u8 *);
+extern asmlinkage int  gdbstub_write_dword(u32, u8 *);
+
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+
+extern u8       gdbstub_rx_buffer[PAGE_SIZE];
+extern u32      gdbstub_rx_inp;
+extern u32      gdbstub_rx_outp;
+extern u8       gdbstub_rx_overflow;
+extern u8       gdbstub_busy;
+extern u8       gdbstub_rx_unget;
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+        __attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h
new file mode 100644
index 000000000000..54d950117674
--- /dev/null
+++ b/arch/mn10300/include/asm/hardirq.h
@@ -0,0 +1,48 @@
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+        unsigned int    __softirq_pending;
+        unsigned long   idle_timestamp;
+        unsigned int    __nmi_count;    /* arch dependent */
+        unsigned int    __irq_count;    /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(int irq);
+
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ *   reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+                              enum exception_code intcode);
+
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ *   but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+                                       intr_stub_fnx handler);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h
new file mode 100644
index 000000000000..90f2abb04bfd
--- /dev/null
+++ b/arch/mn10300/include/asm/highmem.h
@@ -0,0 +1,116 @@
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* undef for production */
+#undef HIGHMEM_DEBUG
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void __init kmap_init(void);
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE      0xfe000000UL
+#define LAST_PKMAP      1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern unsigned long kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline unsigned long kmap(struct page *page)
+{
+        if (in_interrupt())
+                BUG();
+        if (page < highmem_start_page)
+                return page_address(page);
+        return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+        if (in_interrupt())
+                BUG();
+        if (page < highmem_start_page)
+                return;
+        kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+        enum fixed_addresses idx;
+        unsigned long vaddr;
+
+        if (page < highmem_start_page)
+                return page_address(page);
+
+        debug_kmap_atomic(type);
+        idx = type + KM_TYPE_NR * smp_processor_id();
+        vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+        if (!pte_none(*(kmap_pte - idx)))
+                BUG();
+#endif
+        set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+        __flush_tlb_one(vaddr);
+
+        return vaddr;
+}
+
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+        enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+
+        if (vaddr < FIXADDR_START) /* FIXME */
+                return;
+
+        if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+                BUG();
+
+        /*
+         * force other mappings to Oops if they'll try to access
+         * this pte without first remap it
+         */
+        pte_clear(kmap_pte - idx);
+        __flush_tlb_one(vaddr);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mn10300/include/asm/hw_irq.h b/arch/mn10300/include/asm/hw_irq.h
new file mode 100644
index 000000000000..70619901098e
--- /dev/null
+++ b/arch/mn10300/include/asm/hw_irq.h
@@ -0,0 +1,14 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h
new file mode 100644
index 000000000000..ba544c796c5a
--- /dev/null
+++ b/arch/mn10300/include/asm/intctl-regs.h
@@ -0,0 +1,73 @@
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* interrupt controller registers */
+#define GxICR(X)                __SYSREG(0xd4000000 + (X) * 4, u16)     /* group irq ctrl regs */
+
+#define IAGR                    __SYSREG(0xd4000100, u16)       /* intr acceptance group reg */
+#define IAGR_GN                 0x00fc          /* group number register
+                                                 * (documentation _has_ to be wrong)
+                                                 */
+
+#define EXTMD                   __SYSREG(0xd4000200, u16)       /* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+
+#define SET_XIRQ_TRIGGER(X,Y)                   \
+do {                                            \
+        u16 x = EXTMD;                          \
+        x &= ~(3 << ((X) * 2));                 \
+        x |= ((Y) & 3) << ((X) * 2);            \
+        EXTMD = x;                              \
+} while (0)
+
+#define XIRQ_TRIGGER_LOWLEVEL   0
+#define XIRQ_TRIGGER_HILEVEL    1
+#define XIRQ_TRIGGER_NEGEDGE    2
+#define XIRQ_TRIGGER_POSEDGE    3
+
+/* non-maskable interrupt control */
+#define NMIIRQ                  0
+#define NMICR                   GxICR(NMIIRQ)   /* NMI control register */
+#define NMICR_NMIF              0x0001          /* NMI pin interrupt flag */
+#define NMICR_WDIF              0x0002          /* watchdog timer overflow flag */
+#define NMICR_ABUSERR           0x0008          /* async bus error flag */
+
+/* maskable interrupt control */
+#define GxICR_DETECT            0x0001          /* interrupt detect flag */
+#define GxICR_REQUEST           0x0010          /* interrupt request flag */
+#define GxICR_ENABLE            0x0100          /* interrupt enable flag */
+#define GxICR_LEVEL             0x7000          /* interrupt priority level */
+#define GxICR_LEVEL_0           0x0000          /* - level 0 */
+#define GxICR_LEVEL_1           0x1000          /* - level 1 */
+#define GxICR_LEVEL_2           0x2000          /* - level 2 */
+#define GxICR_LEVEL_3           0x3000          /* - level 3 */
+#define GxICR_LEVEL_4           0x4000          /* - level 4 */
+#define GxICR_LEVEL_5           0x5000          /* - level 5 */
+#define GxICR_LEVEL_6           0x6000          /* - level 6 */
+#define GxICR_LEVEL_SHIFT       12
+
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+
+/* external interrupts */
+#define XIRQxICR(X)             GxICR((X))      /* external interrupt control regs */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_INTCTL_REGS_H */
diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h
new file mode 100644
index 000000000000..c1a4119e6497
--- /dev/null
+++ b/arch/mn10300/include/asm/io.h
@@ -0,0 +1,301 @@
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+        return *(const volatile u8 *) addr;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+        return *(const volatile u16 *) addr;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+        return *(const volatile u32 *) addr;
+}
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+        *(volatile u8 *) addr = b;
+}
+
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+        *(volatile u16 *) addr = b;
+}
+
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+        *(volatile u32 *) addr = b;
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+        return readb((volatile void __iomem *) addr);
+}
+
+static inline void outb_local(u8 b, unsigned long addr)
+{
+        return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline u8 inb(unsigned long addr)
+{
+        return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+        return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+        return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+        return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+        return writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+        return writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr)     inb(addr)
+#define inw_p(addr)     inw(addr)
+#define inl_p(addr)     inl(addr)
+#define outb_p(x, addr) outb((x), (addr))
+#define outw_p(x, addr) outw((x), (addr))
+#define outl_p(x, addr) outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+        if (count) {
+                u8 *buf = buffer;
+                do {
+                        u8 x = inb(addr);
+                        *buf++ = x;
+                } while (--count);
+        }
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+        if (count) {
+                u16 *buf = buffer;
+                do {
+                        u16 x = inw(addr);
+                        *buf++ = x;
+                } while (--count);
+        }
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+        if (count) {
+                u32 *buf = buffer;
+                do {
+                        u32 x = inl(addr);
+                        *buf++ = x;
+                } while (--count);
+        }
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+        if (count) {
+                const u8 *buf = buffer;
+                do {
+                        outb(*buf++, addr);
+                } while (--count);
+        }
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+        if (count) {
+                const u16 *buf = buffer;
+                do {
+                        outw(*buf++, addr);
+                } while (--count);
+        }
+}
+
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+        if ((unsigned long) buffer & 0x3)
+                return __outsl(addr, buffer, count);
+
+        if (count) {
+                const u32 *buf = buffer;
+                do {
+                        outl(*buf++, addr);
+                } while (--count);
+        }
+}
+
+#define ioread8(addr)           readb(addr)
+#define ioread16(addr)          readw(addr)
+#define ioread32(addr)          readl(addr)
+
+#define iowrite8(v, addr)       writeb((v), (addr))
+#define iowrite16(v, addr)      writew((v), (addr))
+#define iowrite32(v, addr)      writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+        insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+        insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+        insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+        outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+        outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+        outsl((unsigned long) (p), (src), (count))
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+        return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+        return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+                              unsigned long flags)
+{
+        return (void *) offset;
+}
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+        return (void *) offset;
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area.  it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+        return (void *) (offset | 0x20000000);
+}
+
+#define ioremap_wc ioremap_nocache
+
+static inline void iounmap(void *addr)
+{
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+        return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#define xlate_dev_kmem_ptr(p)   ((void *) (p))
+#define xlate_dev_mem_ptr(p)    ((void *) (p))
+
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+        return ((unsigned long) address) & ~0x20000000;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+        return (void *) address;
+}
+
+#define page_to_bus page_to_phys
+
+#define memset_io(a, b, c)      memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c)  memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)    memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/arch/mn10300/include/asm/ioctl.h b/arch/mn10300/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/mn10300/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h
new file mode 100644
index 000000000000..dcbfb452974f
--- /dev/null
+++ b/arch/mn10300/include/asm/ioctls.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS          0x5401
+#define TCSETS          0x5402
+#define TCSETSW         0x5403
+#define TCSETSF         0x5404
+#define TCGETA          0x5405
+#define TCSETA          0x5406
+#define TCSETAW         0x5407
+#define TCSETAF         0x5408
+#define TCSBRK          0x5409
+#define TCXONC          0x540A
+#define TCFLSH          0x540B
+#define TIOCEXCL        0x540C
+#define TIOCNXCL        0x540D
+#define TIOCSCTTY       0x540E
+#define TIOCGPGRP       0x540F
+#define TIOCSPGRP       0x5410
+#define TIOCOUTQ        0x5411
+#define TIOCSTI         0x5412
+#define TIOCGWINSZ      0x5413
+#define TIOCSWINSZ      0x5414
+#define TIOCMGET        0x5415
+#define TIOCMBIS        0x5416
+#define TIOCMBIC        0x5417
+#define TIOCMSET        0x5418
+#define TIOCGSOFTCAR    0x5419
+#define TIOCSSOFTCAR    0x541A
+#define FIONREAD        0x541B
+#define TIOCINQ         FIONREAD
+#define TIOCLINUX       0x541C
+#define TIOCCONS        0x541D
+#define TIOCGSERIAL     0x541E
+#define TIOCSSERIAL     0x541F
+#define TIOCPKT         0x5420
+#define FIONBIO         0x5421
+#define TIOCNOTTY       0x5422
+#define TIOCSETD        0x5423
+#define TIOCGETD        0x5424
+#define TCSBRKP         0x5425  /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK        0x5427  /* BSD compatibility */
+#define TIOCCBRK        0x5428  /* BSD compatibility */
+#define TIOCGSID        0x5429  /* Return the session ID of FD */
+#define TCGETS2         _IOR('T', 0x2A, struct termios2)
+#define TCSETS2         _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2        _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2        _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN        _IOR('T', 0x30, unsigned int) /* Get Pty Number
+                                                       * (of pty-mux device) */
+#define TIOCSPTLCK      _IOW('T', 0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX        0x5450
+#define FIOCLEX         0x5451
+#define FIOASYNC        0x5452
+#define TIOCSERCONFIG   0x5453
+#define TIOCSERGWILD    0x5454
+#define TIOCSERSWILD    0x5455
+#define TIOCGLCKTRMIOS  0x5456
+#define TIOCSLCKTRMIOS  0x5457
+#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT      0x545C  /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x545D  /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE        0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA             0
+#define TIOCPKT_FLUSHREAD        1
+#define TIOCPKT_FLUSHWRITE       2
+#define TIOCPKT_STOP             4
+#define TIOCPKT_START            8
+#define TIOCPKT_NOSTOP          16
+#define TIOCPKT_DOSTOP          32
+
+#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
+
+#endif /* _ASM_IOCTLS_H */
diff --git a/arch/mn10300/include/asm/ipc.h b/arch/mn10300/include/asm/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/arch/mn10300/include/asm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..f6f63d448272
--- /dev/null
+++ b/arch/mn10300/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h
new file mode 100644
index 000000000000..25c045d16d1c
--- /dev/null
+++ b/arch/mn10300/include/asm/irq.h
@@ -0,0 +1,32 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ *   - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <proc/irq.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ          INT_MAX
+
+/* hardware irq numbers */
+#define NR_IRQS         GxICR_NUM_IRQS
+
+/* external hardware irq numbers */
+#define NR_XIRQS        GxICR_NUM_XIRQS
+
+#define irq_canonicalize(IRQ) (IRQ)
+
+#endif /* _ASM_IRQ_H */
diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h
new file mode 100644
index 000000000000..a848cd232eb4
--- /dev/null
+++ b/arch/mn10300/include/asm/irq_regs.h
@@ -0,0 +1,24 @@
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/arch/mn10300/include/asm/kdebug.h b/arch/mn10300/include/asm/kdebug.h
new file mode 100644
index 000000000000..0f47e112190c
--- /dev/null
+++ b/arch/mn10300/include/asm/kdebug.h
@@ -0,0 +1,22 @@
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+        DIE_OOPS = 1,
+        DIE_BREAKPOINT,
+        DIE_GPF,
+};
+
+#endif /* _ASM_KDEBUG_H */
diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h
new file mode 100644
index 000000000000..3398f9f35603
--- /dev/null
+++ b/arch/mn10300/include/asm/kmap_types.h
@@ -0,0 +1,31 @@
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR
+};
+
+#endif /* _ASM_KMAP_TYPES_H */
diff --git a/arch/mn10300/include/asm/kprobes.h b/arch/mn10300/include/asm/kprobes.h
new file mode 100644
index 000000000000..c800b590183a
--- /dev/null
+++ b/arch/mn10300/include/asm/kprobes.h
@@ -0,0 +1,50 @@
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct kprobe;
+
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION  0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+        /*  copy of original instruction
+         */
+        kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+extern const int kretprobe_blacklist_size;
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+                                    unsigned long val, void *data);
+
+#define flush_insn_slot(p)  do {} while (0)
+
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif /* _ASM_KPROBES_H */
diff --git a/arch/mn10300/include/asm/linkage.h b/arch/mn10300/include/asm/linkage.h
new file mode 100644
index 000000000000..dda3002a5dfa
--- /dev/null
+++ b/arch/mn10300/include/asm/linkage.h
@@ -0,0 +1,20 @@
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+
+/* don't override anything */
+#define asmlinkage
+
+#define __ALIGN         .align 4,0xcb
+#define __ALIGN_STR     ".align 4,0xcb"
+
+#endif
diff --git a/arch/mn10300/include/asm/local.h b/arch/mn10300/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/mn10300/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/mn10300/include/asm/mc146818rtc.h b/arch/mn10300/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..df6bc6e0e8c6
--- /dev/null
+++ b/arch/mn10300/include/asm/mc146818rtc.h
@@ -0,0 +1 @@
+#include <asm/rtc-regs.h>
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
new file mode 100644
index 000000000000..b7986b65addf
--- /dev/null
+++ b/arch/mn10300/include/asm/mman.h
@@ -0,0 +1,28 @@
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN   0x0100          /* stack-like segment */
+#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
+#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
+#define MAP_LOCKED      0x2000          /* pages are locked */
+#define MAP_NORESERVE   0x4000          /* don't check for reservations */
+#define MAP_POPULATE    0x8000          /* populate (prefault) pagetables */
+#define MAP_NONBLOCK    0x10000         /* do not block on IO */
+
+#define MCL_CURRENT     1               /* lock all current mappings */
+#define MCL_FUTURE      2               /* lock all future mappings */
+
+#endif /* _ASM_MMAN_H */
diff --git a/arch/mn10300/include/asm/mmu.h b/arch/mn10300/include/asm/mmu.h
new file mode 100644
index 000000000000..2d2d097e7309
--- /dev/null
+++ b/arch/mn10300/include/asm/mmu.h
@@ -0,0 +1,19 @@
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+/*
+ * MMU context
+ */
+typedef struct {
+        unsigned long   tlbpid[NR_CPUS];        /* TLB PID for this process on
+                                                 * each CPU */
+} mm_context_t;
+
+#endif /* _ASM_MMU_H */
diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h
new file mode 100644
index 000000000000..a9e2e34f69b0
--- /dev/null
+++ b/arch/mn10300/include/asm/mmu_context.h
@@ -0,0 +1,138 @@
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#define MMU_CONTEXT_TLBPID_MASK         0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK        0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION       0x00000100UL
+#define MMU_NO_CONTEXT                  0x00000000UL
+
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm)  (mm->context.tlbpid[smp_processor_id()])
+
+#define enter_lazy_tlb(mm, tsk) do {} while (0)
+
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+        cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+        cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task)           do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task)     true
+#endif /* CONFIG_SMP */
+
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+        unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+        unsigned long mc = ++(*pmc);
+
+        if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+                /* we exhausted the TLB PIDs of this version on this CPU, so we
+                 * flush this CPU's TLB in its entirety and start new cycle */
+                flush_tlb_all();
+
+                /* fix the TLB version if needed (we avoid version #0 so as to
+                 * distingush MMU_NO_CONTEXT) */
+                if (!mc)
+                        *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+        }
+        mm_context(mm) = mc;
+        return mc;
+}
+
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+        unsigned long mc = MMU_NO_CONTEXT, cache;
+
+        if (mm) {
+                cache = mmu_context_cache[smp_processor_id()];
+                mc = mm_context(mm);
+
+                /* if we have an old version of the context, replace it */
+                if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+                        mc = allocate_mmu_context(mm);
+        }
+        return mc;
+}
+
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+                                   struct mm_struct *mm)
+{
+        int num_cpus = NR_CPUS, i;
+
+        for (i = 0; i < num_cpus; i++)
+                mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+        return 0;
+}
+
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm)     do { } while (0)
+
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+        PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+                             struct task_struct *tsk)
+{
+        int cpu = smp_processor_id();
+
+        if (prev != next) {
+                cpu_ran_vm(cpu, next);
+                activate_context(next, cpu);
+                PTBR = (unsigned long) next->pgd;
+        } else if (!cpu_maybe_ran_vm(cpu, next)) {
+                activate_context(next, cpu);
+        }
+}
+
+#define deactivate_mm(tsk, mm)  do {} while (0)
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/arch/mn10300/include/asm/module.h b/arch/mn10300/include/asm/module.h
new file mode 100644
index 000000000000..5d7057d01494
--- /dev/null
+++ b/arch/mn10300/include/asm/module.h
@@ -0,0 +1,27 @@
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr        Elf32_Shdr
+#define Elf_Sym         Elf32_Sym
+#define Elf_Ehdr        Elf32_Ehdr
+
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
diff --git a/arch/mn10300/include/asm/msgbuf.h b/arch/mn10300/include/asm/msgbuf.h
new file mode 100644
index 000000000000..8b602450cc4a
--- /dev/null
+++ b/arch/mn10300/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+        struct ipc64_perm       msg_perm;
+        __kernel_time_t         msg_stime;      /* last msgsnd time */
+        unsigned long           __unused1;
+        __kernel_time_t         msg_rtime;      /* last msgrcv time */
+        unsigned long           __unused2;
+        __kernel_time_t         msg_ctime;      /* last change time */
+        unsigned long           __unused3;
+        unsigned long           msg_cbytes;     /* current number of bytes on queue */
+        unsigned long           msg_qnum;       /* number of messages in queue */
+        unsigned long           msg_qbytes;     /* max number of bytes on queue */
+        __kernel_pid_t          msg_lspid;      /* pid of last msgsnd */
+        __kernel_pid_t          msg_lrpid;      /* last receive pid */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/arch/mn10300/include/asm/mutex.h b/arch/mn10300/include/asm/mutex.h
new file mode 100644
index 000000000000..84f5490c6fb4
--- /dev/null
+++ b/arch/mn10300/include/asm/mutex.h
@@ -0,0 +1,16 @@
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h
new file mode 100644
index 000000000000..f3671cbbc117
--- /dev/null
+++ b/arch/mn10300/include/asm/nmi.h
@@ -0,0 +1,14 @@
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+
+#endif /* _ASM_NMI_H */
diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h
new file mode 100644
index 000000000000..8288e124165b
--- /dev/null
+++ b/arch/mn10300/include/asm/page.h
@@ -0,0 +1,128 @@
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT      12
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE       +(1 << PAGE_SHIFT)      /* unary plus marks an
+                                                 * immediate val not an addr */
+#define PAGE_MASK       +(~(PAGE_SIZE - 1))
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)        memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from)     memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page)      clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to)   copy_page(vto, vfrom)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define PTE_MASK        PAGE_MASK
+#define HPAGE_SHIFT     22
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE              ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK              (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define pte_val(x)      ((x).pte)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) })
+#define __pgd(x)        ((pgd_t) { (x) })
+#define __pgprot(x)     ((pgprot_t) { (x) })
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+        int order;
+
+        size = (size - 1) >> (PAGE_SHIFT - 1);
+        order = -1;
+        do {
+                size >>= 1;
+                order++;
+        } while (size);
+        return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define __PAGE_OFFSET           (PAGE_OFFSET_RAW)
+#define PAGE_OFFSET             ((unsigned long) __PAGE_OFFSET)
+
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp              (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+
+#define __pa(x)                 ((unsigned long)(x))
+#define __va(x)                 ((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn)        (mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page)       ((unsigned long)((page) - mem_map) + __pfn_disp)
+
+#define pfn_valid(pfn)                                  \
+({                                                      \
+        unsigned long __pfn = (pfn) - __pfn_disp;       \
+        __pfn < max_mapnr;                              \
+})
+
+#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+        (VM_READ | VM_WRITE | \
+        ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/mn10300/include/asm/page_offset.h b/arch/mn10300/include/asm/page_offset.h
new file mode 100644
index 000000000000..8eb5b16ad86b
--- /dev/null
+++ b/arch/mn10300/include/asm/page_offset.h
@@ -0,0 +1,11 @@
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+
+#endif
diff --git a/arch/mn10300/include/asm/param.h b/arch/mn10300/include/asm/param.h
new file mode 100644
index 000000000000..789b1df41fcb
--- /dev/null
+++ b/arch/mn10300/include/asm/param.h
@@ -0,0 +1,34 @@
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ              CONFIG_HZ       /* Internal kernel timer frequency */
+#define USER_HZ         100             /* .. some user interfaces are in
+                                         * "ticks" */
+#define CLOCKS_PER_SEC  (USER_HZ)       /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ              100
+#endif
+
+#define EXEC_PAGESIZE   4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
new file mode 100644
index 000000000000..0517b45313d8
--- /dev/null
+++ b/arch/mn10300/include/asm/pci.h
@@ -0,0 +1,129 @@
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/mm.h>           /* for struct page */
+
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+        printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+               (u32)(ADDR), ##__VA_ARGS__)
+
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...)          \
+do {                                                    \
+        printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n",  \
+               (BUS)->number,                                   \
+               PCI_SLOT(DEVFN),                                 \
+               PCI_FUNC(DEVFN),                                 \
+               (u32)(WHERE), ##__VA_ARGS__);                    \
+} while (0)
+
+#else
+#define __pcbdebug(FMT, ADDR, ...)              do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0)
+#endif
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses()     1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses()     0
+#endif
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO          0xBE000004
+#define PCIBIOS_MIN_MEM         0xB8000000
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)    (0)
+
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+        return 0;
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state,
+                               int write_combine);
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+                                    struct pci_bus_region *region,
+                                    struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+                                    struct resource *res,
+                                    struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+        struct resource *root = NULL;
+
+        if (res->flags & IORESOURCE_IO)
+                root = &ioport_resource;
+        if (res->flags & IORESOURCE_MEM)
+                root = &iomem_resource;
+
+        return root;
+}
+
+#define pcibios_scan_all_fns(a, b)      0
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+        return channel ? 15 : 14;
+}
+
+#endif /* _ASM_PCI_H */
diff --git a/arch/mn10300/include/asm/percpu.h b/arch/mn10300/include/asm/percpu.h
new file mode 100644
index 000000000000..06a959d67234
--- /dev/null
+++ b/arch/mn10300/include/asm/percpu.h
@@ -0,0 +1 @@
+#include <asm-generic/percpu.h>
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
new file mode 100644
index 000000000000..ec057e1bd4cf
--- /dev/null
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -0,0 +1,56 @@
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h>           /* for struct page */
+
+struct mm_struct;
+struct page;
+
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+        set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+        set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+        free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+        __free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
new file mode 100644
index 000000000000..6dc30fc827c4
--- /dev/null
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -0,0 +1,492 @@
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/cpu-regs.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+
+#include <asm/bitops.h>
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT     22
+#define PTRS_PER_PGD    1024
+#define PTRS_PER_PUD    1       /* we don't really have any PUD physically */
+#define PTRS_PER_PMD    1       /* we don't really have any PMD physically */
+#define PTRS_PER_PTE    1024
+
+#define PGD_SIZE        PAGE_SIZE
+#define PMD_SIZE        (1UL << PMD_SHIFT)
+#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK      (~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD       (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS      0
+
+#define USER_PGD_PTRS           (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS         (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT    22
+#define BOOT_USER_PGD_PTRS      (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS    (1024 - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET  (8 * 1024 * 1024)
+#define VMALLOC_START   (0x70000000)
+#define VMALLOC_END     (0x7C000000)
+
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID         xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED      xPTEL_UNUSED1_BIT       /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX            xPTEL_UNUSED2_BIT       /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE         xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT       xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY         xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL        xPTEL_G_BIT
+
+#define _PAGE_VALID             xPTEL_V
+#define _PAGE_ACCESSED          xPTEL_UNUSED1
+#define _PAGE_NX                xPTEL_UNUSED2           /* no-execute bit */
+#define _PAGE_CACHE             xPTEL_C
+#define _PAGE_PRESENT           xPTEL_PV
+#define _PAGE_DIRTY             xPTEL_D
+#define _PAGE_PROT              xPTEL_PR
+#define _PAGE_PROT_RKNU         xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU         xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU         xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU         xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU         xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL            xPTEL_G
+#define _PAGE_PSE               xPTEL_PS_4Mb            /* 4MB page */
+
+#define _PAGE_FILE              xPTEL_UNUSED1_BIT       /* set:pagecache unset:swap */
+
+#define __PAGE_PROT_UWAUX       0x040
+#define __PAGE_PROT_USER        0x080
+#define __PAGE_PROT_WRITE       0x100
+
+#define _PAGE_PRESENTV          (_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE          0x000   /* If not present */
+
+#ifndef __ASSEMBLY__
+
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define _PAGE_TABLE     (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK  (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PAGE_NONE     (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED   (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY     (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+
+#define PAGE_NONE               __pgprot(__PAGE_NONE     | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC      __pgprot(__PAGE_SHARED   | _PAGE_NX)
+#define PAGE_COPY_NOEXEC        __pgprot(__PAGE_COPY     | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC    __pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC        __pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC          __pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC      __pgprot(__PAGE_READONLY)
+#define PAGE_COPY               PAGE_COPY_NOEXEC
+#define PAGE_READONLY           PAGE_READONLY_NOEXEC
+#define PAGE_SHARED             PAGE_SHARED_EXEC
+
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+
+#define __PAGE_KERNEL           (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE   (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC      (__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO        (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE     (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL             __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO          __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC        __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE     __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE       __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC  __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY_NOEXEC
+#define __P010  PAGE_COPY_NOEXEC
+#define __P011  PAGE_COPY_NOEXEC
+#define __P100  PAGE_READONLY_EXEC
+#define __P101  PAGE_READONLY_EXEC
+#define __P110  PAGE_COPY_EXEC
+#define __P111  PAGE_COPY_EXEC
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY_NOEXEC
+#define __S010  PAGE_SHARED_NOEXEC
+#define __S011  PAGE_SHARED_NOEXEC
+#define __S100  PAGE_READONLY_EXEC
+#define __S101  PAGE_READONLY_EXEC
+#define __S110  PAGE_SHARED_EXEC
+#define __S111  PAGE_SHARED_EXEC
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x)  (pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp)                         \
+do {                                                    \
+        set_pte_at((mm), (addr), (xp), __pte(0));       \
+} while (0)
+
+#define pmd_none(x)     (!pmd_val(x))
+#define pmd_present(x)  (!pmd_none(x))
+#define pmd_clear(xp)   do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x)      0
+
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)   { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte)   { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)  { return pte_val(pte) & __PAGE_PROT_WRITE; }
+static inline int pte_special(pte_t pte){ return 0; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)   { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+        pte_val(pte) |= _PAGE_NX; return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+        pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)      { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)        { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)      { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)      { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte)       { pte_val(pte) &= ~_PAGE_NX; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+        pte_val(pte) |= __PAGE_PROT_USER;
+        if (pte_write(pte))
+                pte_val(pte) |= __PAGE_PROT_UWAUX;
+        return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+        pte_val(pte) |= __PAGE_PROT_WRITE;
+        if (pte_val(pte) & __PAGE_PROT_USER)
+                pte_val(pte) |= __PAGE_PROT_UWAUX;
+        return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)    { return pte; }
+
+#define pte_ERROR(e) \
+        printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+               __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+        printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+               __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp)                           do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                 (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval)      set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval)          set_pte((pteptr), (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define ptep_get_and_clear(mm, addr, ptep) \
+        __pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b)          (pte_val(a) == pte_val(b))
+#define pte_page(x)             pfn_to_page(pte_pfn(x))
+#define pte_none(x)             (!pte_val(x))
+#define pte_pfn(x)              ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn)         ((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot)      __pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)      __pmd(__pfn_addr(pfn) | pgprot_val(prot))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+        return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+        return 1;
+}
+
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS       29
+
+#define pte_to_pgoff(pte)       (pte_val(pte) >> 2)
+#define pgoff_to_pte(off)       __pte((off) << 2 | _PAGE_FILE)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)                   (((x).val >> 2) & 0x3f)
+#define __swp_offset(x)                 ((x).val >> 8)
+#define __swp_entry(type, offset) \
+        ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)           __pte((x).val)
+
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+                              pte_t *ptep)
+{
+        if (!pte_dirty(*ptep))
+                return 0;
+        return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+                              pte_t *ptep)
+{
+        if (!pte_young(*ptep))
+                return 0;
+        return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+        pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+        set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".  On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot)  __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+        ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        pte_val(pte) &= _PAGE_CHG_MASK;
+        pte_val(pte) |= pgprot_val(newprot);
+        return pte;
+}
+
+#define page_pte(page)  page_pte_prot((page), __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+        ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd)   pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+#define pmd_large(pmd) \
+        ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+         (_PAGE_PSE | _PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address)   pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+        (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+        (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, address) \
+        ((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+        return 0;
+}
+
+#define pte_offset_map(dir, address) \
+        ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte)          do {} while (0)
+#define pte_unmap_nested(pte)   do {} while (0)
+
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+                             unsigned long address, pte_t pte);
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)   (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+        remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+
+#define MK_IOSPACE_PFN(space, pfn)      (pfn)
+#define GET_IOSPACE(pfn)                0
+#define GET_PFN(pfn)                    (pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/mn10300/include/asm/pio-regs.h b/arch/mn10300/include/asm/pio-regs.h
new file mode 100644
index 000000000000..96bc8182d0ba
--- /dev/null
+++ b/arch/mn10300/include/asm/pio-regs.h
@@ -0,0 +1,233 @@
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* I/O port 0 */
+#define P0MD                    __SYSREG(0xdb000000, u16)       /* mode reg */
+#define P0MD_0                  0x0003  /* mask */
+#define P0MD_0_IN               0x0000  /* input mode */
+#define P0MD_0_OUT              0x0001  /* output mode */
+#define P0MD_0_TM0IO            0x0002  /* timer 0 I/O mode */
+#define P0MD_0_EYECLK           0x0003  /* test signal output (clock) */
+#define P0MD_1                  0x000c
+#define P0MD_1_IN               0x0000
+#define P0MD_1_OUT              0x0004
+#define P0MD_1_TM1IO            0x0008  /* timer 1 I/O mode */
+#define P0MD_1_EYED             0x000c  /* test signal output (data) */
+#define P0MD_2                  0x0030
+#define P0MD_2_IN               0x0000
+#define P0MD_2_OUT              0x0010
+#define P0MD_2_TM2IO            0x0020  /* timer 2 I/O mode */
+#define P0MD_3                  0x00c0
+#define P0MD_3_IN               0x0000
+#define P0MD_3_OUT              0x0040
+#define P0MD_3_TM3IO            0x0080  /* timer 3 I/O mode */
+#define P0MD_4                  0x0300
+#define P0MD_4_IN               0x0000
+#define P0MD_4_OUT              0x0100
+#define P0MD_4_TM4IO            0x0200  /* timer 4 I/O mode */
+#define P0MD_4_XCTS             0x0300  /* XCTS input for serial port 2 */
+#define P0MD_5                  0x0c00
+#define P0MD_5_IN               0x0000
+#define P0MD_5_OUT              0x0400
+#define P0MD_5_TM5IO            0x0800  /* timer 5 I/O mode */
+#define P0MD_6                  0x3000
+#define P0MD_6_IN               0x0000
+#define P0MD_6_OUT              0x1000
+#define P0MD_6_TM6IOA           0x2000  /* timer 6 I/O mode A */
+#define P0MD_7                  0xc000
+#define P0MD_7_IN               0x0000
+#define P0MD_7_OUT              0x4000
+#define P0MD_7_TM6IOB           0x8000  /* timer 6 I/O mode B */
+
+#define P0IN                    __SYSREG(0xdb000004, u8)        /* in reg */
+#define P0OUT                   __SYSREG(0xdb000008, u8)        /* out reg */
+
+#define P0TMIO                  __SYSREG(0xdb00000c, u8)        /* TM pin I/O control reg */
+#define P0TMIO_TM0_IN           0x00
+#define P0TMIO_TM0_OUT          0x01
+#define P0TMIO_TM1_IN           0x00
+#define P0TMIO_TM1_OUT          0x02
+#define P0TMIO_TM2_IN           0x00
+#define P0TMIO_TM2_OUT          0x04
+#define P0TMIO_TM3_IN           0x00
+#define P0TMIO_TM3_OUT          0x08
+#define P0TMIO_TM4_IN           0x00
+#define P0TMIO_TM4_OUT          0x10
+#define P0TMIO_TM5_IN           0x00
+#define P0TMIO_TM5_OUT          0x20
+#define P0TMIO_TM6A_IN          0x00
+#define P0TMIO_TM6A_OUT         0x40
+#define P0TMIO_TM6B_IN          0x00
+#define P0TMIO_TM6B_OUT         0x80
+
+/* I/O port 1 */
+#define P1MD                    __SYSREG(0xdb000100, u16)       /* mode reg */
+#define P1MD_0                  0x0003  /* mask */
+#define P1MD_0_IN               0x0000  /* input mode */
+#define P1MD_0_OUT              0x0001  /* output mode */
+#define P1MD_0_TM7IO            0x0002  /* timer 7 I/O mode */
+#define P1MD_0_ADTRG            0x0003  /* A/D converter trigger mode */
+#define P1MD_1                  0x000c
+#define P1MD_1_IN               0x0000
+#define P1MD_1_OUT              0x0004
+#define P1MD_1_TM8IO            0x0008  /* timer 8 I/O mode */
+#define P1MD_1_XDMR0            0x000c  /* DMA request input 0 mode */
+#define P1MD_2                  0x0030
+#define P1MD_2_IN               0x0000
+#define P1MD_2_OUT              0x0010
+#define P1MD_2_TM9IO            0x0020  /* timer 9 I/O mode */
+#define P1MD_2_XDMR1            0x0030  /* DMA request input 1 mode */
+#define P1MD_3                  0x00c0
+#define P1MD_3_IN               0x0000
+#define P1MD_3_OUT              0x0040
+#define P1MD_3_TM10IO           0x0080  /* timer 10 I/O mode */
+#define P1MD_3_FRQS0            0x00c0  /* CPU clock multiplier setting input 0 mode */
+#define P1MD_4                  0x0300
+#define P1MD_4_IN               0x0000
+#define P1MD_4_OUT              0x0100
+#define P1MD_4_TM11IO           0x0200  /* timer 11 I/O mode */
+#define P1MD_4_FRQS1            0x0300  /* CPU clock multiplier setting input 1 mode */
+
+#define P1IN                    __SYSREG(0xdb000104, u8)        /* in reg */
+#define P1OUT                   __SYSREG(0xdb000108, u8)        /* out reg */
+#define P1TMIO                  __SYSREG(0xdb00010c, u8)        /* TM pin I/O control reg */
+#define P1TMIO_TM11_IN          0x00
+#define P1TMIO_TM11_OUT         0x01
+#define P1TMIO_TM10_IN          0x00
+#define P1TMIO_TM10_OUT         0x02
+#define P1TMIO_TM9_IN           0x00
+#define P1TMIO_TM9_OUT          0x04
+#define P1TMIO_TM8_IN           0x00
+#define P1TMIO_TM8_OUT          0x08
+#define P1TMIO_TM7_IN           0x00
+#define P1TMIO_TM7_OUT          0x10
+
+/* I/O port 2 */
+#define P2MD                    __SYSREG(0xdb000200, u16)       /* mode reg */
+#define P2MD_0                  0x0003  /* mask */
+#define P2MD_0_IN               0x0000  /* input mode */
+#define P2MD_0_OUT              0x0001  /* output mode */
+#define P2MD_0_BOOTBW           0x0003  /* boot bus width selector mode */
+#define P2MD_1                  0x000c
+#define P2MD_1_IN               0x0000
+#define P2MD_1_OUT              0x0004
+#define P2MD_1_BOOTSEL          0x000c  /* boot device selector mode */
+#define P2MD_2                  0x0030
+#define P2MD_2_IN               0x0000
+#define P2MD_2_OUT              0x0010
+#define P2MD_3                  0x00c0
+#define P2MD_3_IN               0x0000
+#define P2MD_3_OUT              0x0040
+#define P2MD_3_CKIO             0x00c0  /* mode */
+#define P2MD_4                  0x0300
+#define P2MD_4_IN               0x0000
+#define P2MD_4_OUT              0x0100
+#define P2MD_4_CMOD             0x0300  /* mode */
+
+#define P2IN                    __SYSREG(0xdb000204, u8)        /* in reg */
+#define P2OUT                   __SYSREG(0xdb000208, u8)        /* out reg */
+#define P2TMIO                  __SYSREG(0xdb00020c, u8)        /* TM pin I/O control reg */
+
+/* I/O port 3 */
+#define P3MD                    __SYSREG(0xdb000300, u16)       /* mode reg */
+#define P3MD_0                  0x0003  /* mask */
+#define P3MD_0_IN               0x0000  /* input mode */
+#define P3MD_0_OUT              0x0001  /* output mode */
+#define P3MD_0_AFRXD            0x0002  /* AFR interface mode */
+#define P3MD_1                  0x000c
+#define P3MD_1_IN               0x0000
+#define P3MD_1_OUT              0x0004
+#define P3MD_1_AFTXD            0x0008  /* AFR interface mode */
+#define P3MD_2                  0x0030
+#define P3MD_2_IN               0x0000
+#define P3MD_2_OUT              0x0010
+#define P3MD_2_AFSCLK           0x0020  /* AFR interface mode */
+#define P3MD_3                  0x00c0
+#define P3MD_3_IN               0x0000
+#define P3MD_3_OUT              0x0040
+#define P3MD_3_AFFS             0x0080  /* AFR interface mode */
+#define P3MD_4                  0x0300
+#define P3MD_4_IN               0x0000
+#define P3MD_4_OUT              0x0100
+#define P3MD_4_AFEHC            0x0200  /* AFR interface mode */
+
+#define P3IN                    __SYSREG(0xdb000304, u8)        /* in reg */
+#define P3OUT                   __SYSREG(0xdb000308, u8)        /* out reg */
+
+/* I/O port 4 */
+#define P4MD                    __SYSREG(0xdb000400, u16)       /* mode reg */
+#define P4MD_0                  0x0003  /* mask */
+#define P4MD_0_IN               0x0000  /* input mode */
+#define P4MD_0_OUT              0x0001  /* output mode */
+#define P4MD_0_SCL0             0x0002  /* I2C/serial mode */
+#define P4MD_1                  0x000c
+#define P4MD_1_IN               0x0000
+#define P4MD_1_OUT              0x0004
+#define P4MD_1_SDA0             0x0008
+#define P4MD_2                  0x0030
+#define P4MD_2_IN               0x0000
+#define P4MD_2_OUT              0x0010
+#define P4MD_2_SCL1             0x0020
+#define P4MD_3                  0x00c0
+#define P4MD_3_IN               0x0000
+#define P4MD_3_OUT              0x0040
+#define P4MD_3_SDA1             0x0080
+#define P4MD_4                  0x0300
+#define P4MD_4_IN               0x0000
+#define P4MD_4_OUT              0x0100
+#define P4MD_4_SBO0             0x0200
+#define P4MD_5                  0x0c00
+#define P4MD_5_IN               0x0000
+#define P4MD_5_OUT              0x0400
+#define P4MD_5_SBO1             0x0800
+#define P4MD_6                  0x3000
+#define P4MD_6_IN               0x0000
+#define P4MD_6_OUT              0x1000
+#define P4MD_6_SBT0             0x2000
+#define P4MD_7                  0xc000
+#define P4MD_7_IN               0x0000
+#define P4MD_7_OUT              0x4000
+#define P4MD_7_SBT1             0x8000
+
+#define P4IN                    __SYSREG(0xdb000404, u8)        /* in reg */
+#define P4OUT                   __SYSREG(0xdb000408, u8)        /* out reg */
+
+/* I/O port 5 */
+#define P5MD                    __SYSREG(0xdb000500, u16)       /* mode reg */
+#define P5MD_0                  0x0003  /* mask */
+#define P5MD_0_IN               0x0000  /* input mode */
+#define P5MD_0_OUT              0x0001  /* output mode */
+#define P5MD_0_IRTXD            0x0002  /* IrDA mode */
+#define P5MD_0_SOUT             0x0004  /* serial mode */
+#define P5MD_1                  0x000c
+#define P5MD_1_IN               0x0000
+#define P5MD_1_OUT              0x0004
+#define P5MD_1_IRRXDS           0x0008  /* IrDA mode */
+#define P5MD_1_SIN              0x000c  /* serial mode */
+#define P5MD_2                  0x0030
+#define P5MD_2_IN               0x0000
+#define P5MD_2_OUT              0x0010
+#define P5MD_2_IRRXDF           0x0020  /* IrDA mode */
+
+#define P5IN                    __SYSREG(0xdb000504, u8)        /* in reg */
+#define P5OUT                   __SYSREG(0xdb000508, u8)        /* out reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PIO_REGS_H */
diff --git a/arch/mn10300/include/asm/poll.h b/arch/mn10300/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/mn10300/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/mn10300/include/asm/posix_types.h b/arch/mn10300/include/asm/posix_types.h
new file mode 100644
index 000000000000..077567c37798
--- /dev/null
+++ b/arch/mn10300/include/asm/posix_types.h
@@ -0,0 +1,132 @@
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short  __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+        int     val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+        int     __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef  __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+        unsigned long __tmp = __fd / __NFDBITS;
+        unsigned long __rem = __fd % __NFDBITS;
+        __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef  __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+        unsigned long __tmp = __fd / __NFDBITS;
+        unsigned long __rem = __fd % __NFDBITS;
+        __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef  __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+        unsigned long __tmp = __fd / __NFDBITS;
+        unsigned long __rem = __fd % __NFDBITS;
+        return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef  __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+        unsigned long *__tmp = __p->fds_bits;
+        int __i;
+
+        if (__builtin_constant_p(__FDSET_LONGS)) {
+                switch (__FDSET_LONGS) {
+                case 16:
+                        __tmp[ 0] = 0; __tmp[ 1] = 0;
+                        __tmp[ 2] = 0; __tmp[ 3] = 0;
+                        __tmp[ 4] = 0; __tmp[ 5] = 0;
+                        __tmp[ 6] = 0; __tmp[ 7] = 0;
+                        __tmp[ 8] = 0; __tmp[ 9] = 0;
+                        __tmp[10] = 0; __tmp[11] = 0;
+                        __tmp[12] = 0; __tmp[13] = 0;
+                        __tmp[14] = 0; __tmp[15] = 0;
+                        return;
+
+                case 8:
+                        __tmp[ 0] = 0; __tmp[ 1] = 0;
+                        __tmp[ 2] = 0; __tmp[ 3] = 0;
+                        __tmp[ 4] = 0; __tmp[ 5] = 0;
+                        __tmp[ 6] = 0; __tmp[ 7] = 0;
+                        return;
+
+                case 4:
+                        __tmp[ 0] = 0; __tmp[ 1] = 0;
+                        __tmp[ 2] = 0; __tmp[ 3] = 0;
+                        return;
+                }
+        }
+        __i = __FDSET_LONGS;
+        while (__i) {
+                __i--;
+                *__tmp = 0;
+                __tmp++;
+        }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
new file mode 100644
index 000000000000..73239271873d
--- /dev/null
+++ b/arch/mn10300/include/asm/processor.h
@@ -0,0 +1,186 @@
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()                     \
+({                                              \
+        void *__pc;                             \
+        asm("mov pc,%0" : "=a"(__pc));          \
+        __pc;                                   \
+})
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct mn10300_cpuinfo {
+        int             type;
+        unsigned long   loops_per_sec;
+        char            hard_math;
+        unsigned long   *pgd_quick;
+        unsigned long   *pte_quick;
+        unsigned long   pgtable_cache_sz;
+};
+
+extern struct mn10300_cpuinfo boot_cpu_data;
+
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() barrier()
+
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE               0x70000000
+
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP               0x70000000
+#define STACK_TOP_MAX           STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      0x30000000
+
+typedef struct {
+        unsigned long   seg;
+} mm_segment_t;
+
+struct fpu_state_struct {
+        unsigned long   fs[32];         /* fpu registers */
+        unsigned long   fpcr;           /* fpu control register */
+};
+
+struct thread_struct {
+        struct pt_regs          *uregs;         /* userspace register frame */
+        unsigned long           pc;             /* kernel PC */
+        unsigned long           sp;             /* kernel SP */
+        unsigned long           a3;             /* kernel FP */
+        unsigned long           wchan;
+        unsigned long           usp;
+        struct pt_regs          *__frame;
+        unsigned long           fpu_flags;
+#define THREAD_USING_FPU        0x00000001      /* T if this task is using the FPU */
+        struct fpu_state_struct fpu_state;
+};
+
+#define INIT_THREAD                             \
+{                                               \
+        .uregs          = init_uregs,           \
+        .pc             = 0,                    \
+        .sp             = 0,                    \
+        .a3             = 0,                    \
+        .wchan          = 0,                    \
+        .__frame        = NULL,                 \
+}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+  NULL, NULL }
+
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ *   syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do {         \
+        set_fs(USER_DS);                                \
+        __frame = current->thread.uregs;                \
+        __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;   \
+        __frame->pc = new_pc;                           \
+        __frame->sp = new_sp;                           \
+} while (0)
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define task_pt_regs(task)                                              \
+({                                                                      \
+       struct pt_regs *__regs__;                                        \
+       __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+       __regs__ - 1;                                                    \
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+
+#define KSTK_TOP(info)                          \
+({                                              \
+        (unsigned long)(info) + THREAD_SIZE;    \
+})
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+        asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+        asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+        asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+        asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
new file mode 100644
index 000000000000..7b06cc623d8b
--- /dev/null
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -0,0 +1,103 @@
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#define PT_A3           0
+#define PT_A2           1
+#define PT_D3           2
+#define PT_D2           3
+#define PT_MCVF         4
+#define PT_MCRL         5
+#define PT_MCRH         6
+#define PT_MDRQ         7
+#define PT_E1           8
+#define PT_E0           9
+#define PT_E7           10
+#define PT_E6           11
+#define PT_E5           12
+#define PT_E4           13
+#define PT_E3           14
+#define PT_E2           15
+#define PT_SP           16
+#define PT_LAR          17
+#define PT_LIR          18
+#define PT_MDR          19
+#define PT_A1           20
+#define PT_A0           21
+#define PT_D1           22
+#define PT_D0           23
+#define PT_ORIG_D0      24
+#define PT_EPSW         25
+#define PT_PC           26
+#define NR_PTREGS       27
+
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+        unsigned long           a3;             /* syscall arg 3 */
+        unsigned long           a2;             /* syscall arg 4 */
+        unsigned long           d3;             /* syscall arg 5 */
+        unsigned long           d2;             /* syscall arg 6 */
+        unsigned long           mcvf;
+        unsigned long           mcrl;
+        unsigned long           mcrh;
+        unsigned long           mdrq;
+        unsigned long           e1;
+        unsigned long           e0;
+        unsigned long           e7;
+        unsigned long           e6;
+        unsigned long           e5;
+        unsigned long           e4;
+        unsigned long           e3;
+        unsigned long           e2;
+        unsigned long           sp;
+        unsigned long           lar;
+        unsigned long           lir;
+        unsigned long           mdr;
+        unsigned long           a1;
+        unsigned long           a0;             /* syscall arg 1 */
+        unsigned long           d1;             /* syscall arg 2 */
+        unsigned long           d0;             /* syscall ret */
+        struct pt_regs          *next;          /* next frame pointer */
+        unsigned long           orig_d0;        /* syscall number */
+        unsigned long           epsw;
+        unsigned long           pc;
+};
+#endif
+
+extern struct pt_regs *__frame; /* current frame pointer */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+
+#if defined(__KERNEL__)
+
+#if !defined(__ASSEMBLY__)
+#define user_mode(regs)                 (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs)       ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif  /*  !__ASSEMBLY  */
+
+#define profile_pc(regs) ((regs)->pc)
+
+#endif  /*  __KERNEL__  */
+
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h
new file mode 100644
index 000000000000..174523d50132
--- /dev/null
+++ b/arch/mn10300/include/asm/reset-regs.h
@@ -0,0 +1,64 @@
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG           /* See include/linux/nmi.h */
+#endif
+
+/*
+ * watchdog timer registers
+ */
+#define WDBC                    __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+
+#define WDCTR                   __SYSREG(0xc0001002, u8)  /* watchdog timer control reg */
+#define WDCTR_WDCK              0x07    /* clock source selection */
+#define WDCTR_WDCK_256th        0x00    /* - OSCI/256 */
+#define WDCTR_WDCK_1024th       0x01    /* - OSCI/1024 */
+#define WDCTR_WDCK_2048th       0x02    /* - OSCI/2048 */
+#define WDCTR_WDCK_16384th      0x03    /* - OSCI/16384 */
+#define WDCTR_WDCK_65536th      0x04    /* - OSCI/65536 */
+#define WDCTR_WDRST             0x40    /* binary counter reset */
+#define WDCTR_WDCNE             0x80    /* watchdog timer enable */
+
+#define RSTCTR                  __SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST          0x01    /* chip reset */
+#define RSTCTR_DBFRST           0x02    /* double fault reset flag */
+#define RSTCTR_WDTRST           0x04    /* watchdog timer reset flag */
+#define RSTCTR_WDREN            0x08    /* watchdog timer reset enable */
+
+#ifndef __ASSEMBLY__
+
+static inline void mn10300_proc_hard_reset(void)
+{
+        RSTCTR &= ~RSTCTR_CHIPRST;
+        RSTCTR |= RSTCTR_CHIPRST;
+}
+
+extern unsigned int watchdog_alert_counter;
+
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RESET_REGS_H */
diff --git a/arch/mn10300/include/asm/resource.h b/arch/mn10300/include/asm/resource.h
new file mode 100644
index 000000000000..04bc4db8921b
--- /dev/null
+++ b/arch/mn10300/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h
new file mode 100644
index 000000000000..c42deefaec11
--- /dev/null
+++ b/arch/mn10300/include/asm/rtc-regs.h
@@ -0,0 +1,86 @@
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+#define RTSCR                   __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR                   __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR                   __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR                   __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR                   __SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR                   __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR                  __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR                  __SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR                  __SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR                   __SYSREG(0xd8600009, u8) /* RTC years count reg */
+
+#define RTCRA                   __SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS                0x0f    /* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE           0x00    /* - off */
+#define RTCRA_RS_3_90625ms      0x01    /* - 3.90625ms  (1/256s) */
+#define RTCRA_RS_7_8125ms       0x02    /* - 7.8125ms   (1/128s) */
+#define RTCRA_RS_122_070us      0x03    /* - 122.070us  (1/8192s) */
+#define RTCRA_RS_244_141us      0x04    /* - 244.141us  (1/4096s) */
+#define RTCRA_RS_488_281us      0x05    /* - 488.281us  (1/2048s) */
+#define RTCRA_RS_976_5625us     0x06    /* - 976.5625us (1/1024s) */
+#define RTCRA_RS_1_953125ms     0x07    /* - 1.953125ms (1/512s) */
+#define RTCRA_RS_3_90624ms      0x08    /* - 3.90624ms  (1/256s) */
+#define RTCRA_RS_7_8125ms_b     0x09    /* - 7.8125ms   (1/128s) */
+#define RTCRA_RS_15_625ms       0x0a    /* - 15.625ms   (1/64s) */
+#define RTCRA_RS_31_25ms        0x0b    /* - 31.25ms    (1/32s) */
+#define RTCRA_RS_62_5ms         0x0c    /* - 62.5ms     (1/16s) */
+#define RTCRA_RS_125ms          0x0d    /* - 125ms      (1/8s) */
+#define RTCRA_RS_250ms          0x0e    /* - 250ms      (1/4s) */
+#define RTCRA_RS_500ms          0x0f    /* - 500ms      (1/2s) */
+#define RTCRA_DVR               0x40    /* divider reset */
+#define RTCRA_UIP               0x80    /* clock update flag */
+
+#define RTCRB                   __SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE               0x01    /* daylight savings time enable */
+#define RTCRB_TM                0x02    /* time format */
+#define RTCRB_TM_12HR           0x00    /* - 12 hour format */
+#define RTCRB_TM_24HR           0x02    /* - 24 hour format */
+#define RTCRB_DM                0x04    /* numeric value format */
+#define RTCRB_DM_BCD            0x00    /* - BCD */
+#define RTCRB_DM_BINARY         0x04    /* - binary */
+#define RTCRB_UIE               0x10    /* update interrupt disable */
+#define RTCRB_AIE               0x20    /* alarm interrupt disable */
+#define RTCRB_PIE               0x40    /* periodic interrupt disable */
+#define RTCRB_SET               0x80    /* clock update enable */
+
+#define RTSRC                   __SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF                0x10    /* update end interrupt flag */
+#define RTSRC_AF                0x20    /* alarm interrupt flag */
+#define RTSRC_PF                0x40    /* periodic interrupt flag */
+#define RTSRC_IRQF              0x80    /* interrupt flag */
+
+#define RTIRQ                   32
+#define RTICR                   GxICR(RTIRQ)
+
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x)             0xd8600000
+#define RTC_ALWAYS_BCD          1       /* RTC operates in binary mode */
+
+#define CMOS_READ(addr)         __SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr)   \
+        do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+
+#define RTC_IRQ                 RTIRQ
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RTC_REGS_H */
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
new file mode 100644
index 000000000000..c295194cc703
--- /dev/null
+++ b/arch/mn10300/include/asm/rtc.h
@@ -0,0 +1,41 @@
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef CONFIG_MN10300_RTC
+
+#include <linux/init.h>
+
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+
+#else /* !CONFIG_MN10300_RTC */
+
+static inline void check_rtc_time(void)
+{
+}
+
+static inline void calibrate_clock(void)
+{
+}
+
+static inline unsigned long get_initial_rtc_time(void)
+{
+        return 0;
+}
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#include <asm-generic/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h
new file mode 100644
index 000000000000..67535901b9ff
--- /dev/null
+++ b/arch/mn10300/include/asm/scatterlist.h
@@ -0,0 +1,55 @@
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long   sg_magic;
+#endif
+        unsigned long   page_link;
+        unsigned int    offset;         /* for highmem, page offset */
+        dma_addr_t      dma_address;
+        unsigned int    length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#endif /* _ASM_SCATTERLIST_H */
diff --git a/arch/mn10300/include/asm/sections.h b/arch/mn10300/include/asm/sections.h
new file mode 100644
index 000000000000..2b8c5160388f
--- /dev/null
+++ b/arch/mn10300/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/mn10300/include/asm/sembuf.h b/arch/mn10300/include/asm/sembuf.h
new file mode 100644
index 000000000000..301f3f9d8aa9
--- /dev/null
+++ b/arch/mn10300/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+        __kernel_time_t sem_otime;              /* last semop time */
+        unsigned long   __unused1;
+        __kernel_time_t sem_ctime;              /* last change time */
+        unsigned long   __unused2;
+        unsigned long   sem_nsems;              /* no. of semaphores in array */
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h
new file mode 100644
index 000000000000..6498469e93ac
--- /dev/null
+++ b/arch/mn10300/include/asm/serial-regs.h
@@ -0,0 +1,160 @@
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* serial port 0 */
+#define SC0CTR                  __SYSREG(0xd4002000, u16)       /* control reg */
+#define SC01CTR_CK              0x0007  /* clock source select */
+#define SC0CTR_CK_TM8UFLOW_8    0x0000  /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM9UFLOW_8    0x0000  /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define SC01CTR_CK_IOCLK_8      0x0001  /* - 1/8 IOCLK */
+#define SC01CTR_CK_IOCLK_32     0x0002  /* - 1/32 IOCLK */
+#define SC0CTR_CK_TM2UFLOW_2    0x0003  /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_2    0x0003  /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM0UFLOW_8    0x0004  /* - 1/8 timer 1 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM1UFLOW_8    0x0004  /* - 1/8 timer 2 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM2UFLOW_8    0x0005  /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_8    0x0005  /* - 1/8 timer 3 underflow (serial port 1 only) */
+#define SC01CTR_CK_EXTERN_8     0x0006  /* - 1/8 external closk */
+#define SC01CTR_CK_EXTERN       0x0007  /* - external closk */
+#define SC01CTR_STB             0x0008  /* stop bit select */
+#define SC01CTR_STB_1BIT        0x0000  /* - 1 stop bit */
+#define SC01CTR_STB_2BIT        0x0008  /* - 2 stop bits */
+#define SC01CTR_PB              0x0070  /* parity bit select */
+#define SC01CTR_PB_NONE         0x0000  /* - no parity */
+#define SC01CTR_PB_FIXED0       0x0040  /* - fixed at 0 */
+#define SC01CTR_PB_FIXED1       0x0050  /* - fixed at 1 */
+#define SC01CTR_PB_EVEN         0x0060  /* - even parity */
+#define SC01CTR_PB_ODD          0x0070  /* - odd parity */
+#define SC01CTR_CLN             0x0080  /* character length */
+#define SC01CTR_CLN_7BIT        0x0000  /* - 7 bit chars */
+#define SC01CTR_CLN_8BIT        0x0080  /* - 8 bit chars */
+#define SC01CTR_TOE             0x0100  /* T input output enable */
+#define SC01CTR_OD              0x0200  /* bit order select */
+#define SC01CTR_OD_LSBFIRST     0x0000  /* - LSB first */
+#define SC01CTR_OD_MSBFIRST     0x0200  /* - MSB first */
+#define SC01CTR_MD              0x0c00  /* mode select */
+#define SC01CTR_MD_STST_SYNC    0x0000  /* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1  0x0400  /* - clock synchronous 1 */
+#define SC01CTR_MD_I2C          0x0800  /* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2  0x0c00  /* - clock synchronous 2 */
+#define SC01CTR_IIC             0x1000  /* I2C mode select */
+#define SC01CTR_BKE             0x2000  /* break transmit enable */
+#define SC01CTR_RXE             0x4000  /* receive enable */
+#define SC01CTR_TXE             0x8000  /* transmit enable */
+
+#define SC0ICR                  __SYSREG(0xd4002004, u8)        /* interrupt control reg */
+#define SC01ICR_DMD             0x80    /* output data mode */
+#define SC01ICR_TD              0x20    /* transmit DMA trigger cause */
+#define SC01ICR_TI              0x10    /* transmit interrupt cause */
+#define SC01ICR_RES             0x04    /* receive error select */
+#define SC01ICR_RI              0x01    /* receive interrupt cause */
+
+#define SC0TXB                  __SYSREG(0xd4002008, u8)        /* transmit buffer reg */
+#define SC0RXB                  __SYSREG(0xd4002009, u8)        /* receive buffer reg */
+
+#define SC0STR                  __SYSREG(0xd400200c, u16)       /* status reg */
+#define SC01STR_OEF             0x0001  /* overrun error found */
+#define SC01STR_PEF             0x0002  /* parity error found */
+#define SC01STR_FEF             0x0004  /* framing error found */
+#define SC01STR_RBF             0x0010  /* receive buffer status */
+#define SC01STR_TBF             0x0020  /* transmit buffer status */
+#define SC01STR_RXF             0x0040  /* receive status */
+#define SC01STR_TXF             0x0080  /* transmit status */
+#define SC01STR_STF             0x0100  /* I2C start sequence found */
+#define SC01STR_SPF             0x0200  /* I2C stop sequence found */
+
+#define SC0RXIRQ                20      /* timer 0 Receive IRQ */
+#define SC0TXIRQ                21      /* timer 0 Transmit IRQ */
+
+#define SC0RXICR                GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
+#define SC0TXICR                GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
+
+/* serial port 1 */
+#define SC1CTR                  __SYSREG(0xd4002010, u16)       /* serial port 1 control */
+#define SC1ICR                  __SYSREG(0xd4002014, u8)        /* interrupt control reg */
+#define SC1TXB                  __SYSREG(0xd4002018, u8)        /* transmit buffer reg */
+#define SC1RXB                  __SYSREG(0xd4002019, u8)        /* receive buffer reg */
+#define SC1STR                  __SYSREG(0xd400201c, u16)       /* status reg */
+
+#define SC1RXIRQ                22      /* timer 1 Receive IRQ */
+#define SC1TXIRQ                23      /* timer 1 Transmit IRQ */
+
+#define SC1RXICR                GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
+#define SC1TXICR                GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
+
+/* serial port 2 */
+#define SC2CTR                  __SYSREG(0xd4002020, u16)       /* control reg */
+#define SC2CTR_CK               0x0003  /* clock source select */
+#define SC2CTR_CK_TM10UFLOW     0x0000  /* - timer 10 underflow */
+#define SC2CTR_CK_TM2UFLOW      0x0001  /* - timer 2 underflow */
+#define SC2CTR_CK_EXTERN        0x0002  /* - external closk */
+#define SC2CTR_CK_TM3UFLOW      0x0003  /* - timer 3 underflow */
+#define SC2CTR_STB              0x0008  /* stop bit select */
+#define SC2CTR_STB_1BIT         0x0000  /* - 1 stop bit */
+#define SC2CTR_STB_2BIT         0x0008  /* - 2 stop bits */
+#define SC2CTR_PB               0x0070  /* parity bit select */
+#define SC2CTR_PB_NONE          0x0000  /* - no parity */
+#define SC2CTR_PB_FIXED0        0x0040  /* - fixed at 0 */
+#define SC2CTR_PB_FIXED1        0x0050  /* - fixed at 1 */
+#define SC2CTR_PB_EVEN          0x0060  /* - even parity */
+#define SC2CTR_PB_ODD           0x0070  /* - odd parity */
+#define SC2CTR_CLN              0x0080  /* character length */
+#define SC2CTR_CLN_7BIT         0x0000  /* - 7 bit chars */
+#define SC2CTR_CLN_8BIT         0x0080  /* - 8 bit chars */
+#define SC2CTR_TWE              0x0100  /* transmit wait enable (enable XCTS control) */
+#define SC2CTR_OD               0x0200  /* bit order select */
+#define SC2CTR_OD_LSBFIRST      0x0000  /* - LSB first */
+#define SC2CTR_OD_MSBFIRST      0x0200  /* - MSB first */
+#define SC2CTR_TWS              0x1000  /* transmit wait select */
+#define SC2CTR_TWS_XCTS_HIGH    0x0000  /* - interrupt TX when XCTS high */
+#define SC2CTR_TWS_XCTS_LOW     0x1000  /* - interrupt TX when XCTS low */
+#define SC2CTR_BKE              0x2000  /* break transmit enable */
+#define SC2CTR_RXE              0x4000  /* receive enable */
+#define SC2CTR_TXE              0x8000  /* transmit enable */
+
+#define SC2ICR                  __SYSREG(0xd4002024, u8)        /* interrupt control reg */
+#define SC2ICR_TD               0x20    /* transmit DMA trigger cause */
+#define SC2ICR_TI               0x10    /* transmit interrupt cause */
+#define SC2ICR_RES              0x04    /* receive error select */
+#define SC2ICR_RI               0x01    /* receive interrupt cause */
+
+#define SC2TXB                  __SYSREG(0xd4002018, u8)        /* transmit buffer reg */
+#define SC2RXB                  __SYSREG(0xd4002019, u8)        /* receive buffer reg */
+#define SC2STR                  __SYSREG(0xd400201c, u8)        /* status reg */
+#define SC2STR_OEF              0x0001  /* overrun error found */
+#define SC2STR_PEF              0x0002  /* parity error found */
+#define SC2STR_FEF              0x0004  /* framing error found */
+#define SC2STR_CTS              0x0008  /* XCTS input pin status (0 means high) */
+#define SC2STR_RBF              0x0010  /* receive buffer status */
+#define SC2STR_TBF              0x0020  /* transmit buffer status */
+#define SC2STR_RXF              0x0040  /* receive status */
+#define SC2STR_TXF              0x0080  /* transmit status */
+
+#define SC2TIM                  __SYSREG(0xd400202d, u8)        /* status reg */
+
+#define SC2RXIRQ                24      /* serial 2 Receive IRQ */
+#define SC2TXIRQ                25      /* serial 2 Transmit IRQ */
+
+#define SC2RXICR                GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
+#define SC2TXICR                GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
new file mode 100644
index 000000000000..a29445cddd6f
--- /dev/null
+++ b/arch/mn10300/include/asm/serial.h
@@ -0,0 +1,36 @@
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD       (18432000 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS   (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS  (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS   (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS  ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS  ASYNC_FOURPORT
+#define ACCENT_FLAGS    0
+#define BOCA_FLAGS      0
+#define HUB6_FLAGS      0
+#define RS_TABLE_SIZE   64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+#include <unit/serial.h>
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
new file mode 100644
index 000000000000..08356c832283
--- /dev/null
+++ b/arch/mn10300/include/asm/setup.h
@@ -0,0 +1,17 @@
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+
+#endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/include/asm/shmbuf.h b/arch/mn10300/include/asm/shmbuf.h
new file mode 100644
index 000000000000..8f300cc35d6c
--- /dev/null
+++ b/arch/mn10300/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+        struct ipc64_perm       shm_perm;       /* operation perms */
+        size_t                  shm_segsz;      /* size of segment (bytes) */
+        __kernel_time_t         shm_atime;      /* last attach time */
+        unsigned long           __unused1;
+        __kernel_time_t         shm_dtime;      /* last detach time */
+        unsigned long           __unused2;
+        __kernel_time_t         shm_ctime;      /* last change time */
+        unsigned long           __unused3;
+        __kernel_pid_t          shm_cpid;       /* pid of creator */
+        __kernel_pid_t          shm_lpid;       /* pid of last operator */
+        unsigned long           shm_nattch;     /* no. of current attaches */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+
+struct shminfo64 {
+        unsigned long   shmmax;
+        unsigned long   shmmin;
+        unsigned long   shmmni;
+        unsigned long   shmseg;
+        unsigned long   shmall;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/arch/mn10300/include/asm/shmparam.h b/arch/mn10300/include/asm/shmparam.h
new file mode 100644
index 000000000000..ab666ed1a070
--- /dev/null
+++ b/arch/mn10300/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mn10300/include/asm/sigcontext.h b/arch/mn10300/include/asm/sigcontext.h
new file mode 100644
index 000000000000..4de3afff4ad7
--- /dev/null
+++ b/arch/mn10300/include/asm/sigcontext.h
@@ -0,0 +1,52 @@
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+struct fpucontext {
+        /* Regular FPU environment */
+        unsigned long   fs[32];         /* fpu registers */
+        unsigned long   fpcr;           /* fpu control register */
+};
+
+struct sigcontext {
+        unsigned long   d0;
+        unsigned long   d1;
+        unsigned long   d2;
+        unsigned long   d3;
+        unsigned long   a0;
+        unsigned long   a1;
+        unsigned long   a2;
+        unsigned long   a3;
+        unsigned long   e0;
+        unsigned long   e1;
+        unsigned long   e2;
+        unsigned long   e3;
+        unsigned long   e4;
+        unsigned long   e5;
+        unsigned long   e6;
+        unsigned long   e7;
+        unsigned long   lar;
+        unsigned long   lir;
+        unsigned long   mdr;
+        unsigned long   mcvf;
+        unsigned long   mcrl;
+        unsigned long   mcrh;
+        unsigned long   mdrq;
+        unsigned long   sp;
+        unsigned long   epsw;
+        unsigned long   pc;
+        struct fpucontext *fpucontext;
+        unsigned long   oldmask;
+};
+
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/arch/mn10300/include/asm/siginfo.h b/arch/mn10300/include/asm/siginfo.h
new file mode 100644
index 000000000000..0815d29d82e5
--- /dev/null
+++ b/arch/mn10300/include/asm/siginfo.h
@@ -0,0 +1 @@
+#include <asm-generic/siginfo.h>
diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
new file mode 100644
index 000000000000..e98817cec5f7
--- /dev/null
+++ b/arch/mn10300/include/asm/signal.h
@@ -0,0 +1,171 @@
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG           64
+#define _NSIG_BPW       32
+#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long   sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS          31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001U
+#define SA_NOCLDWAIT    0x00000002U
+#define SA_SIGINFO      0x00000004U
+#define SA_ONSTACK      0x08000000U
+#define SA_RESTART      0x10000000U
+#define SA_NODEFER      0x40000000U
+#define SA_RESETHAND    0x80000000U
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+#define SA_RESTORER     0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void __user     *ss_sp;
+        int             ss_flags;
+        size_t          ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
new file mode 100644
index 000000000000..4eb8c61b7dab
--- /dev/null
+++ b/arch/mn10300/include/asm/smp.h
@@ -0,0 +1,18 @@
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+
+#endif
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
new file mode 100644
index 000000000000..fb5daf438ec9
--- /dev/null
+++ b/arch/mn10300/include/asm/socket.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET      1
+
+#define SO_DEBUG        1
+#define SO_REUSEADDR    2
+#define SO_TYPE         3
+#define SO_ERROR        4
+#define SO_DONTROUTE    5
+#define SO_BROADCAST    6
+#define SO_SNDBUF       7
+#define SO_RCVBUF       8
+#define SO_SNDBUFFORCE  32
+#define SO_RCVBUFFORCE  33
+#define SO_KEEPALIVE    9
+#define SO_OOBINLINE    10
+#define SO_NO_CHECK     11
+#define SO_PRIORITY     12
+#define SO_LINGER       13
+#define SO_BSDCOMPAT    14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED     16
+#define SO_PEERCRED     17
+#define SO_RCVLOWAT     18
+#define SO_SNDLOWAT     19
+#define SO_RCVTIMEO     20
+#define SO_SNDTIMEO     21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION              22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
+#define SO_SECURITY_ENCRYPTION_NETWORK          24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP            29
+#define SCM_TIMESTAMP           SO_TIMESTAMP
+
+#define SO_ACCEPTCONN           30
+
+#define SO_PEERSEC              31
+#define SO_PASSSEC              34
+#define SO_TIMESTAMPNS          35
+#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
+
+#define SO_MARK                 36
+
+#define SO_TIMESTAMPING         37
+#define SCM_TIMESTAMPING        SO_TIMESTAMPING
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/sockios.h b/arch/mn10300/include/asm/sockios.h
new file mode 100644
index 000000000000..b03043a1c564
--- /dev/null
+++ b/arch/mn10300/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN       0x8901
+#define SIOCSPGRP       0x8902
+#define FIOGETOWN       0x8903
+#define SIOCGPGRP       0x8904
+#define SIOCATMARK      0x8905
+#define SIOCGSTAMP      0x8906          /* Get stamp */
+#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h
new file mode 100644
index 000000000000..4bf9c8b169e0
--- /dev/null
+++ b/arch/mn10300/include/asm/spinlock.h
@@ -0,0 +1,16 @@
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error SMP spinlocks not implemented for MN10300
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mn10300/include/asm/stat.h b/arch/mn10300/include/asm/stat.h
new file mode 100644
index 000000000000..63ff8371cf2c
--- /dev/null
+++ b/arch/mn10300/include/asm/stat.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned long  st_dev;
+        unsigned long  st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+        unsigned long long      st_dev;
+        unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO        1
+        unsigned long   __st_ino;
+
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+
+        unsigned long   st_uid;
+        unsigned long   st_gid;
+
+        unsigned long long      st_rdev;
+        unsigned char   __pad3[4];
+
+        long long       st_size;
+        unsigned long   st_blksize;
+
+        unsigned long   st_blocks;      /* Number 512-byte blocks allocated. */
+        unsigned long   __pad4;         /* future possible st_blocks high bits */
+
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+
+        unsigned long   st_mtime;
+        unsigned int    st_mtime_nsec;
+
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;
+
+        unsigned long long      st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/mn10300/include/asm/statfs.h b/arch/mn10300/include/asm/statfs.h
new file mode 100644
index 000000000000..0b91fe198c20
--- /dev/null
+++ b/arch/mn10300/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/arch/mn10300/include/asm/string.h b/arch/mn10300/include/asm/string.h
new file mode 100644
index 000000000000..47dbd4346c32
--- /dev/null
+++ b/arch/mn10300/include/asm/string.h
@@ -0,0 +1,32 @@
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+
+
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y)                        \
+({                                              \
+        if (sizeof(*(x)) != sizeof(*(y)))       \
+                __struct_cpy_bug;               \
+        memcpy(x, y, sizeof(*(x)));             \
+})
+
+#endif /* _ASM_STRING_H */
diff --git a/arch/mn10300/include/asm/swab.h b/arch/mn10300/include/asm/swab.h
new file mode 100644
index 000000000000..bd818a820ca8
--- /dev/null
+++ b/arch/mn10300/include/asm/swab.h
@@ -0,0 +1,42 @@
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/types.h>
+
+#ifdef __GNUC__
+
+static inline __attribute__((const))
+__u32 __arch_swab32(__u32 x)
+{
+        __u32 ret;
+        asm("swap %1,%0" : "=r" (ret) : "r" (x));
+        return ret;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute__((const))
+__u16 __arch_swab16(__u16 x)
+{
+        __u16 ret;
+        asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+        return ret;
+}
+#define __arch_swab32 __arch_swab32
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#endif /* _ASM_SWAB_H */
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
new file mode 100644
index 000000000000..8214fb7e7fe4
--- /dev/null
+++ b/arch/mn10300/include/asm/system.h
@@ -0,0 +1,237 @@
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+
+struct task_struct;
+struct thread_struct;
+
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+                                struct thread_struct *next,
+                                struct task_struct *prev_task);
+
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last)                                     \
+do {                                                                    \
+        current->thread.wchan = (u_long) __builtin_return_address(0);   \
+        (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+        mb();                                                           \
+        current->thread.wchan = 0;                                      \
+} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+
+#define mb()    asm volatile ("": : :"memory")
+#define rmb()   mb()
+#define wmb()   asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()        mb()
+#define smp_rmb()       rmb()
+#define smp_wmb()       wmb()
+#else
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+#endif
+
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends()          do {} while (0)
+#define smp_read_barrier_depends()      do {} while (0)
+
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ *   - level 0 - GDB stub
+ *   - level 1 - virtual serial DMA (if present)
+ *   - level 5 - normal interrupt priority
+ *   - level 6 - timer interrupt
+ * - "enabled":  run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL       EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL       EPSW_IM_1
+#endif
+
+#define local_save_flags(x)                     \
+do {                                            \
+        typecheck(unsigned long, x);            \
+        asm volatile(                           \
+                "       mov epsw,%0     \n"     \
+                : "=d"(x)                       \
+                );                              \
+} while (0)
+
+#define local_irq_disable()                                             \
+do {                                                                    \
+        asm volatile(                                                   \
+                "       and %0,epsw     \n"                             \
+                "       or %1,epsw      \n"                             \
+                "       nop             \n"                             \
+                "       nop             \n"                             \
+                "       nop             \n"                             \
+                :                                                       \
+                : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL)       \
+                );                                                      \
+} while (0)
+
+#define local_irq_save(x)                       \
+do {                                            \
+        local_save_flags(x);                    \
+        local_irq_disable();                    \
+} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+extern unsigned long __mn10300_irq_enabled_epsw;
+
+#endif
+
+#define local_irq_enable()                                              \
+do {                                                                    \
+        unsigned long tmp;                                              \
+                                                                        \
+        asm volatile(                                                   \
+                "       mov     epsw,%0         \n"                     \
+                "       and     %1,%0           \n"                     \
+                "       or      %2,%0           \n"                     \
+                "       mov     %0,epsw         \n"                     \
+                : "=&d"(tmp)                                            \
+                : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)        \
+                );                                                      \
+} while (0)
+
+#define local_irq_restore(x)                    \
+do {                                            \
+        typecheck(unsigned long, x);            \
+        asm volatile(                           \
+                "       mov %0,epsw     \n"     \
+                "       nop             \n"     \
+                "       nop             \n"     \
+                "       nop             \n"     \
+                :                               \
+                : "d"(x)                        \
+                : "memory", "cc"                \
+                );                              \
+} while (0)
+
+#define irqs_disabled()                         \
+({                                              \
+        unsigned long flags;                    \
+        local_save_flags(flags);                \
+        (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
+})
+
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt()                                                     \
+do {                                                                    \
+        asm volatile("  or      %0,epsw \n"                             \
+                     "  nop             \n"                             \
+                     "  nop             \n"                             \
+                     "  bset    %2,(%1) \n"                             \
+                     :                                                  \
+                     : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+                     : "cc"                                             \
+                     );                                                 \
+} while (0)
+
+#define STI     or EPSW_IE|EPSW_IM,epsw
+#define CLI     and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+        unsigned long retval;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        retval = *m;
+        *m = val;
+        local_irq_restore(flags);
+        return retval;
+}
+
+#define xchg(ptr, v)                                            \
+        ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),    \
+                                     (unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+                                      unsigned long old, unsigned long new)
+{
+        unsigned long retval;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        retval = *m;
+        if (retval == old)
+                *m = new;
+        local_irq_restore(flags);
+        return retval;
+}
+
+#define cmpxchg(ptr, o, n)                                      \
+        ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+                                        (unsigned long)(o),     \
+                                        (unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h
new file mode 100644
index 000000000000..eb2b0dc1f696
--- /dev/null
+++ b/arch/mn10300/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+typedef unsigned int    tcflag_t;
+
+#define NCCS 19
+struct termios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+};
+
+struct termios2 {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+struct ktermios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK  0000001
+#define BRKINT  0000002
+#define IGNPAR  0000004
+#define PARMRK  0000010
+#define INPCK   0000020
+#define ISTRIP  0000040
+#define INLCR   0000100
+#define IGNCR   0000200
+#define ICRNL   0000400
+#define IUCLC   0001000
+#define IXON    0002000
+#define IXANY   0004000
+#define IXOFF   0010000
+#define IMAXBEL 0020000
+#define IUTF8   0040000
+
+/* c_oflag bits */
+#define OPOST   0000001
+#define OLCUC   0000002
+#define ONLCR   0000004
+#define OCRNL   0000010
+#define ONOCR   0000020
+#define ONLRET  0000040
+#define OFILL   0000100
+#define OFDEL   0000200
+#define NLDLY   0000400
+#define   NL0   0000000
+#define   NL1   0000400
+#define CRDLY   0003000
+#define   CR0   0000000
+#define   CR1   0001000
+#define   CR2   0002000
+#define   CR3   0003000
+#define TABDLY  0014000
+#define   TAB0  0000000
+#define   TAB1  0004000
+#define   TAB2  0010000
+#define   TAB3  0014000
+#define   XTABS 0014000
+#define BSDLY   0020000
+#define   BS0   0000000
+#define   BS1   0020000
+#define VTDLY   0040000
+#define   VT0   0000000
+#define   VT1   0040000
+#define FFDLY   0100000
+#define   FF0   0000000
+#define   FF1   0100000
+
+/* c_cflag bit meaning */
+#define CBAUD   0010017
+#define  B0     0000000         /* hang up */
+#define  B50    0000001
+#define  B75    0000002
+#define  B110   0000003
+#define  B134   0000004
+#define  B150   0000005
+#define  B200   0000006
+#define  B300   0000007
+#define  B600   0000010
+#define  B1200  0000011
+#define  B1800  0000012
+#define  B2400  0000013
+#define  B4800  0000014
+#define  B9600  0000015
+#define  B19200 0000016
+#define  B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define   CS5   0000000
+#define   CS6   0000020
+#define   CS7   0000040
+#define   CS8   0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define   BOTHER  0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD    002003600000  /* input baud rate (not used) */
+#define CTVB      004000000000          /* VisioBraille Terminal flow control */
+#define CMSPAR    010000000000          /* mark or space (stick) parity */
+#define CRTSCTS   020000000000          /* flow control */
+
+#define IBSHIFT   16            /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF          0
+#define TCOON           1
+#define TCIOFF          2
+#define TCION           3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH        0
+#define TCOFLUSH        1
+#define TCIOFLUSH       2
+
+/* tcsetattr uses these */
+#define TCSANOW         0
+#define TCSADRAIN       1
+#define TCSAFLUSH       2
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h
new file mode 100644
index 000000000000..dd7cf617e118
--- /dev/null
+++ b/arch/mn10300/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+        unsigned short ws_row;
+        unsigned short ws_col;
+        unsigned short ws_xpixel;
+        unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+        unsigned short c_iflag;         /* input mode flags */
+        unsigned short c_oflag;         /* output mode flags */
+        unsigned short c_cflag;         /* control mode flags */
+        unsigned short c_lflag;         /* local mode flags */
+        unsigned char c_line;           /* line discipline */
+        unsigned char c_cc[NCC];        /* control characters */
+};
+
+#ifdef __KERNEL__
+/*      intr=^C         quit=^|         erase=del       kill=^U
+        eof=^D          vtime=\0        vmin=\1         sxtc=\0
+        start=^Q        stop=^S         susp=^Z         eol=\0
+        reprint=^R      discard=^U      werase=^W       lnext=^V
+        eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE        0x001
+#define TIOCM_DTR       0x002
+#define TIOCM_RTS       0x004
+#define TIOCM_ST        0x008
+#define TIOCM_SR        0x010
+#define TIOCM_CTS       0x020
+#define TIOCM_CAR       0x040
+#define TIOCM_RNG       0x080
+#define TIOCM_DSR       0x100
+#define TIOCM_CD        TIOCM_CAR
+#define TIOCM_RI        TIOCM_RNG
+#define TIOCM_OUT1      0x2000
+#define TIOCM_OUT2      0x4000
+#define TIOCM_LOOP      0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+        unsigned short __tmp; \
+        get_user(__tmp, &(termio)->x); \
+        *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+        SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+        copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+        put_user((termios)->c_iflag, &(termio)->c_iflag); \
+        put_user((termios)->c_oflag, &(termio)->c_oflag); \
+        put_user((termios)->c_cflag, &(termio)->c_cflag); \
+        put_user((termios)->c_lflag, &(termio)->c_lflag); \
+        put_user((termios)->c_line,  &(termio)->c_line); \
+        copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+        copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+        copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+        copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+        copy_to_user(u, k, sizeof(struct termios))
+
+#endif  /* _ASM_TERMIOS_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
new file mode 100644
index 000000000000..78a3881f3c12
--- /dev/null
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -0,0 +1,170 @@
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define PREEMPT_ACTIVE          0x10000000
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE             (4096)
+#else
+#define THREAD_SIZE             (8192)
+#endif
+
+#define STACK_WARN              (THREAD_SIZE / 8)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+        struct task_struct      *task;          /* main task structure */
+        struct exec_domain      *exec_domain;   /* execution domain */
+        unsigned long           flags;          /* low level flags */
+        __u32                   cpu;            /* current CPU */
+        __s32                   preempt_count;  /* 0 => preemptable, <0 => BUG */
+
+        mm_segment_t            addr_limit;     /* thread address space:
+                                                   0-0xBFFFFFFF for user-thead
+                                                   0-0xFFFFFFFF for kernel-thread
+                                                */
+        struct restart_block    restart_block;
+
+        __u8                    supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .flags          = 0,                    \
+        .cpu            = 0,                    \
+        .preempt_count  = 1,                    \
+        .addr_limit     = KERNEL_DS,            \
+        .restart_block = {                      \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+#define init_uregs                                                      \
+        ((struct pt_regs *)                                             \
+         ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+
+extern struct thread_info *__current_ti;
+
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+        struct thread_info *ti;
+        asm("mov sp,%0\n"
+            "and %1,%0\n"
+            : "=d" (ti)
+            : "i" (~(THREAD_SIZE - 1))
+            : "cc");
+        return ti;
+}
+
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+        unsigned long sp;
+        asm("mov sp,%0; ":"=r" (sp));
+        return sp;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(ti)    kfree((ti))
+#define get_thread_info(ti)     get_task_struct((ti)->task)
+#define put_thread_info(ti)     put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+        mov     sp,\reg
+        and     -THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_NOTIFY_RESUME       1       /* resumption notification requested */
+#define TIF_SIGPENDING          2       /* signal pending */
+#define TIF_NEED_RESCHED        3       /* rescheduling necessary */
+#define TIF_SINGLESTEP          4       /* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK     5       /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG      16      /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE              17      /* OOM killer killed process */
+#define TIF_FREEZE              18      /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE      +(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME      +(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING         +(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       +(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP         +(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK    +(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG     +(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE             +(1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK          0x0000FFFE      /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK       0x0000FFFF      /* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h
new file mode 100644
index 000000000000..1d883b7f94ab
--- /dev/null
+++ b/arch/mn10300/include/asm/timer-regs.h
@@ -0,0 +1,293 @@
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* timer prescalar control */
+#define TMPSCNT                 __SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define TMPSCNT_ENABLE          0x80    /* timer prescaler enable */
+#define TMPSCNT_DISABLE         0x00    /* timer prescaler disable */
+
+/* 8 bit timers */
+#define TM0MD                   __SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define TM0MD_SRC               0x07    /* timer source */
+#define TM0MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM0MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM0MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM0MD_SRC_TM2IO         0x03    /* - TM2IO pin input */
+#define TM0MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM0MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM0MD_SRC_TM0IO         0x07    /* - TM0IO pin input */
+#define TM0MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM0MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM1MD                   __SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define TM1MD_SRC               0x07    /* timer source */
+#define TM1MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM1MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM1MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM1MD_SRC_TM0CASCADE    0x03    /* - cascade with timer 0 */
+#define TM1MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM1MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM1MD_SRC_TM1IO         0x07    /* - TM1IO pin input */
+#define TM1MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM1MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM2MD                   __SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define TM2MD_SRC               0x07    /* timer source */
+#define TM2MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM2MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM2MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM2MD_SRC_TM1CASCADE    0x03    /* - cascade with timer 1 */
+#define TM2MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM2MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM2MD_SRC_TM2IO         0x07    /* - TM2IO pin input */
+#define TM2MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM2MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM3MD                   __SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define TM3MD_SRC               0x07    /* timer source */
+#define TM3MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM3MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM3MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM3MD_SRC_TM1CASCADE    0x03    /* - cascade with timer 2 */
+#define TM3MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM3MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM3MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM3MD_SRC_TM3IO         0x07    /* - TM3IO pin input */
+#define TM3MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM3MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM01MD                  __SYSREG(0xd4003000, u16)  /* timer 0:1 mode register */
+
+#define TM0BR                   __SYSREG(0xd4003010, u8)   /* timer 0 base register */
+#define TM1BR                   __SYSREG(0xd4003011, u8)   /* timer 1 base register */
+#define TM2BR                   __SYSREG(0xd4003012, u8)   /* timer 2 base register */
+#define TM3BR                   __SYSREG(0xd4003013, u8)   /* timer 3 base register */
+#define TM01BR                  __SYSREG(0xd4003010, u16)  /* timer 0:1 base register */
+
+#define TM0BC                   __SYSREGC(0xd4003020, u8)  /* timer 0 binary counter */
+#define TM1BC                   __SYSREGC(0xd4003021, u8)  /* timer 1 binary counter */
+#define TM2BC                   __SYSREGC(0xd4003022, u8)  /* timer 2 binary counter */
+#define TM3BC                   __SYSREGC(0xd4003023, u8)  /* timer 3 binary counter */
+#define TM01BC                  __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+
+#define TM0IRQ                  2       /* timer 0 IRQ */
+#define TM1IRQ                  3       /* timer 1 IRQ */
+#define TM2IRQ                  4       /* timer 2 IRQ */
+#define TM3IRQ                  5       /* timer 3 IRQ */
+
+#define TM0ICR                  GxICR(TM0IRQ)   /* timer 0 uflow intr ctrl reg */
+#define TM1ICR                  GxICR(TM1IRQ)   /* timer 1 uflow intr ctrl reg */
+#define TM2ICR                  GxICR(TM2IRQ)   /* timer 2 uflow intr ctrl reg */
+#define TM3ICR                  GxICR(TM3IRQ)   /* timer 3 uflow intr ctrl reg */
+
+/* 16-bit timers 4,5 & 7-11 */
+#define TM4MD                   __SYSREG(0xd4003080, u8)   /* timer 4 mode register */
+#define TM4MD_SRC               0x07    /* timer source */
+#define TM4MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM4MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM4MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM4MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM4MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM4MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM4MD_SRC_TM4IO         0x07    /* - TM4IO pin input */
+#define TM4MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM4MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM5MD                   __SYSREG(0xd4003082, u8)   /* timer 5 mode register */
+#define TM5MD_SRC               0x07    /* timer source */
+#define TM5MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM5MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM5MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM5MD_SRC_TM4CASCADE    0x03    /* - cascade with timer 4 */
+#define TM5MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM5MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM5MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM5MD_SRC_TM5IO         0x07    /* - TM5IO pin input */
+#define TM5MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM5MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM7MD                   __SYSREG(0xd4003086, u8)   /* timer 7 mode register */
+#define TM7MD_SRC               0x07    /* timer source */
+#define TM7MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM7MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM7MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM7MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM7MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM7MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM7MD_SRC_TM7IO         0x07    /* - TM7IO pin input */
+#define TM7MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM7MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM8MD                   __SYSREG(0xd4003088, u8)   /* timer 8 mode register */
+#define TM8MD_SRC               0x07    /* timer source */
+#define TM8MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM8MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM8MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM8MD_SRC_TM7CASCADE    0x03    /* - cascade with timer 7 */
+#define TM8MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM8MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM8MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM8MD_SRC_TM8IO         0x07    /* - TM8IO pin input */
+#define TM8MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM8MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM9MD                   __SYSREG(0xd400308a, u8)   /* timer 9 mode register */
+#define TM9MD_SRC               0x07    /* timer source */
+#define TM9MD_SRC_IOCLK         0x00    /* - IOCLK */
+#define TM9MD_SRC_IOCLK_8       0x01    /* - 1/8 IOCLK */
+#define TM9MD_SRC_IOCLK_32      0x02    /* - 1/32 IOCLK */
+#define TM9MD_SRC_TM8CASCADE    0x03    /* - cascade with timer 8 */
+#define TM9MD_SRC_TM0UFLOW      0x04    /* - timer 0 underflow */
+#define TM9MD_SRC_TM1UFLOW      0x05    /* - timer 1 underflow */
+#define TM9MD_SRC_TM2UFLOW      0x06    /* - timer 2 underflow */
+#define TM9MD_SRC_TM9IO         0x07    /* - TM9IO pin input */
+#define TM9MD_INIT_COUNTER      0x40    /* initialize TMnBC = TMnBR */
+#define TM9MD_COUNT_ENABLE      0x80    /* timer count enable */
+
+#define TM10MD                  __SYSREG(0xd400308c, u8)   /* timer 10 mode register */
+#define TM10MD_SRC              0x07    /* timer source */
+#define TM10MD_SRC_IOCLK        0x00    /* - IOCLK */
+#define TM10MD_SRC_IOCLK_8      0x01    /* - 1/8 IOCLK */
+#define TM10MD_SRC_IOCLK_32     0x02    /* - 1/32 IOCLK */
+#define TM10MD_SRC_TM9CASCADE   0x03    /* - cascade with timer 9 */
+#define TM10MD_SRC_TM0UFLOW     0x04    /* - timer 0 underflow */
+#define TM10MD_SRC_TM1UFLOW     0x05    /* - timer 1 underflow */
+#define TM10MD_SRC_TM2UFLOW     0x06    /* - timer 2 underflow */
+#define TM10MD_SRC_TM10IO       0x07    /* - TM10IO pin input */
+#define TM10MD_INIT_COUNTER     0x40    /* initialize TMnBC = TMnBR */
+#define TM10MD_COUNT_ENABLE     0x80    /* timer count enable */
+
+#define TM11MD                  __SYSREG(0xd400308e, u8)   /* timer 11 mode register */
+#define TM11MD_SRC              0x07    /* timer source */
+#define TM11MD_SRC_IOCLK        0x00    /* - IOCLK */
+#define TM11MD_SRC_IOCLK_8      0x01    /* - 1/8 IOCLK */
+#define TM11MD_SRC_IOCLK_32     0x02    /* - 1/32 IOCLK */
+#define TM11MD_SRC_TM7CASCADE   0x03    /* - cascade with timer 7 */
+#define TM11MD_SRC_TM0UFLOW     0x04    /* - timer 0 underflow */
+#define TM11MD_SRC_TM1UFLOW     0x05    /* - timer 1 underflow */
+#define TM11MD_SRC_TM2UFLOW     0x06    /* - timer 2 underflow */
+#define TM11MD_SRC_TM11IO       0x07    /* - TM11IO pin input */
+#define TM11MD_INIT_COUNTER     0x40    /* initialize TMnBC = TMnBR */
+#define TM11MD_COUNT_ENABLE     0x80    /* timer count enable */
+
+#define TM4BR                   __SYSREG(0xd4003090, u16)  /* timer 4 base register */
+#define TM5BR                   __SYSREG(0xd4003092, u16)  /* timer 5 base register */
+#define TM7BR                   __SYSREG(0xd4003096, u16)  /* timer 7 base register */
+#define TM8BR                   __SYSREG(0xd4003098, u16)  /* timer 8 base register */
+#define TM9BR                   __SYSREG(0xd400309a, u16)  /* timer 9 base register */
+#define TM10BR                  __SYSREG(0xd400309c, u16)  /* timer 10 base register */
+#define TM11BR                  __SYSREG(0xd400309e, u16)  /* timer 11 base register */
+#define TM45BR                  __SYSREG(0xd4003090, u32)  /* timer 4:5 base register */
+
+#define TM4BC                   __SYSREG(0xd40030a0, u16)  /* timer 4 binary counter */
+#define TM5BC                   __SYSREG(0xd40030a2, u16)  /* timer 5 binary counter */
+#define TM45BC                  __SYSREG(0xd40030a0, u32)  /* timer 4:5 binary counter */
+
+#define TM7BC                   __SYSREG(0xd40030a6, u16)  /* timer 7 binary counter */
+#define TM8BC                   __SYSREG(0xd40030a8, u16)  /* timer 8 binary counter */
+#define TM9BC                   __SYSREG(0xd40030aa, u16)  /* timer 9 binary counter */
+#define TM10BC                  __SYSREG(0xd40030ac, u16)  /* timer 10 binary counter */
+#define TM11BC                  __SYSREG(0xd40030ae, u16)  /* timer 11 binary counter */
+
+#define TM4IRQ                  6       /* timer 4 IRQ */
+#define TM5IRQ                  7       /* timer 5 IRQ */
+#define TM7IRQ                  11      /* timer 7 IRQ */
+#define TM8IRQ                  12      /* timer 8 IRQ */
+#define TM9IRQ                  13      /* timer 9 IRQ */
+#define TM10IRQ                 14      /* timer 10 IRQ */
+#define TM11IRQ                 15      /* timer 11 IRQ */
+
+#define TM4ICR                  GxICR(TM4IRQ)   /* timer 4 uflow intr ctrl reg */
+#define TM5ICR                  GxICR(TM5IRQ)   /* timer 5 uflow intr ctrl reg */
+#define TM7ICR                  GxICR(TM7IRQ)   /* timer 7 uflow intr ctrl reg */
+#define TM8ICR                  GxICR(TM8IRQ)   /* timer 8 uflow intr ctrl reg */
+#define TM9ICR                  GxICR(TM9IRQ)   /* timer 9 uflow intr ctrl reg */
+#define TM10ICR                 GxICR(TM10IRQ)  /* timer 10 uflow intr ctrl reg */
+#define TM11ICR                 GxICR(TM11IRQ)  /* timer 11 uflow intr ctrl reg */
+
+/* 16-bit timer 6 */
+#define TM6MD                   __SYSREG(0xd4003084, u16)  /* timer6 mode register */
+#define TM6MD_SRC               0x0007  /* timer source */
+#define TM6MD_SRC_IOCLK         0x0000  /* - IOCLK */
+#define TM6MD_SRC_IOCLK_8       0x0001  /* - 1/8 IOCLK */
+#define TM6MD_SRC_IOCLK_32      0x0002  /* - 1/32 IOCLK */
+#define TM6MD_SRC_TM0UFLOW      0x0004  /* - timer 0 underflow */
+#define TM6MD_SRC_TM1UFLOW      0x0005  /* - timer 1 underflow */
+#define TM6MD_SRC_TM6IOB_BOTH   0x0006  /* - TM6IOB pin input (both edges) */
+#define TM6MD_SRC_TM6IOB_SINGLE 0x0007  /* - TM6IOB pin input (single edge) */
+#define TM6MD_CLR_ENABLE        0x0010  /* clear count enable */
+#define TM6MD_ONESHOT_ENABLE    0x0040  /* oneshot count */
+#define TM6MD_TRIG_ENABLE       0x0080  /* TM6IOB pin trigger enable */
+#define TM6MD_PWM               0x3800  /* PWM output mode */
+#define TM6MD_PWM_DIS           0x0000  /* - disabled */
+#define TM6MD_PWM_10BIT         0x1000  /* - 10 bits mode */
+#define TM6MD_PWM_11BIT         0x1800  /* - 11 bits mode */
+#define TM6MD_PWM_12BIT         0x3000  /* - 12 bits mode */
+#define TM6MD_PWM_14BIT         0x3800  /* - 14 bits mode */
+#define TM6MD_INIT_COUNTER      0x4000  /* initialize TMnBC to zero */
+#define TM6MD_COUNT_ENABLE      0x8000  /* timer count enable */
+
+#define TM6MDA                  __SYSREG(0xd40030b4, u8)   /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT              0x07    /* output select */
+#define TM6MDA_OUT_SETA_RESETB  0x00    /* - set at match A, reset at match B */
+#define TM6MDA_OUT_SETA_RESETOV 0x01    /* - set at match A, reset at overflow */
+#define TM6MDA_OUT_SETA         0x02    /* - set at match A */
+#define TM6MDA_OUT_RESETA       0x03    /* - reset at match A */
+#define TM6MDA_OUT_TOGGLE       0x04    /* - toggle on match A */
+#define TM6MDA_MODE             0xc0    /* compare A register mode */
+#define TM6MDA_MODE_CMP_SINGLE  0x00    /* - compare, single buffer mode */
+#define TM6MDA_MODE_CMP_DOUBLE  0x40    /* - compare, double buffer mode */
+#define TM6MDA_MODE_CAP_S_EDGE  0x80    /* - capture, single edge mode */
+#define TM6MDA_MODE_CAP_D_EDGE  0xc0    /* - capture, double edge mode */
+#define TM6MDA_EDGE             0x20    /* compare A edge select */
+#define TM6MDA_EDGE_FALLING     0x00    /* capture on falling edge */
+#define TM6MDA_EDGE_RISING      0x20    /* capture on rising edge */
+#define TM6MDA_CAPTURE_ENABLE   0x10    /* capture enable */
+
+#define TM6MDB                  __SYSREG(0xd40030b5, u8)   /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT              0x07    /* output select */
+#define TM6MDB_OUT_SETB_RESETA  0x00    /* - set at match B, reset at match A */
+#define TM6MDB_OUT_SETB_RESETOV 0x01    /* - set at match B */
+#define TM6MDB_OUT_RESETB       0x03    /* - reset at match B */
+#define TM6MDB_OUT_TOGGLE       0x04    /* - toggle on match B */
+#define TM6MDB_MODE             0xc0    /* compare B register mode */
+#define TM6MDB_MODE_CMP_SINGLE  0x00    /* - compare, single buffer mode */
+#define TM6MDB_MODE_CMP_DOUBLE  0x40    /* - compare, double buffer mode */
+#define TM6MDB_MODE_CAP_S_EDGE  0x80    /* - capture, single edge mode */
+#define TM6MDB_MODE_CAP_D_EDGE  0xc0    /* - capture, double edge mode */
+#define TM6MDB_EDGE             0x20    /* compare B edge select */
+#define TM6MDB_EDGE_FALLING     0x00    /* capture on falling edge */
+#define TM6MDB_EDGE_RISING      0x20    /* capture on rising edge */
+#define TM6MDB_CAPTURE_ENABLE   0x10    /* capture enable */
+
+#define TM6CA                   __SYSREG(0xd40030c4, u16)   /* timer6 cmp/capture reg A */
+#define TM6CB                   __SYSREG(0xd40030d4, u16)   /* timer6 cmp/capture reg B */
+#define TM6BC                   __SYSREG(0xd40030a4, u16)   /* timer6 binary counter */
+
+#define TM6IRQ                  6       /* timer 6 IRQ */
+#define TM6AIRQ                 9       /* timer 6A IRQ */
+#define TM6BIRQ                 10      /* timer 6B IRQ */
+
+#define TM6ICR                  GxICR(TM6IRQ)   /* timer 6 uflow intr ctrl reg */
+#define TM6AICR                 GxICR(TM6AIRQ)  /* timer 6A intr control reg */
+#define TM6BICR                 GxICR(TM6BIRQ)  /* timer 6B intr control reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
new file mode 100644
index 000000000000..8d031f9e117d
--- /dev/null
+++ b/arch/mn10300/include/asm/timex.h
@@ -0,0 +1,33 @@
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/hardirq.h>
+#include <unit/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+                                 * to something appropriate, but what? */
+
+extern cycles_t cacheflush_time;
+
+#ifdef __KERNEL__
+
+static inline cycles_t get_cycles(void)
+{
+        return read_timestamp_counter();
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
diff --git a/arch/mn10300/include/asm/tlb.h b/arch/mn10300/include/asm/tlb.h
new file mode 100644
index 000000000000..65d232b96613
--- /dev/null
+++ b/arch/mn10300/include/asm/tlb.h
@@ -0,0 +1,34 @@
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+extern void check_pgt_cache(void);
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)                         do { } while (0)
+#define tlb_end_vma(tlb, vma)                           do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)      do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb)  flush_tlb_mm((tlb)->mm)
+
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h
new file mode 100644
index 000000000000..e0239865abcb
--- /dev/null
+++ b/arch/mn10300/include/asm/tlbflush.h
@@ -0,0 +1,80 @@
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <asm/processor.h>
+
+#define __flush_tlb()                                           \
+do {                                                            \
+        int w;                                                  \
+        __asm__ __volatile__                                    \
+                ("      mov %1,%0               \n"             \
+                 "      or %2,%0                \n"             \
+                 "      mov %0,%1               \n"             \
+                 : "=d"(w)                                      \
+                 : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV)      \
+                 : "memory"                                     \
+                 );                                             \
+} while (0)
+
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all()                         \
+do {                                            \
+        preempt_disable();                      \
+        __flush_tlb_all();                      \
+        preempt_enable();                       \
+} while (0)
+
+#define flush_tlb_mm(mm)                        \
+do {                                            \
+        preempt_disable();                      \
+        __flush_tlb_all();                      \
+        preempt_enable();                       \
+} while (0)
+
+#define flush_tlb_range(vma, start, end)                        \
+do {                                                            \
+        unsigned long __s __attribute__((unused)) = (start);    \
+        unsigned long __e __attribute__((unused)) = (end);      \
+        preempt_disable();                                      \
+        __flush_tlb_all();                                      \
+        preempt_enable();                                       \
+} while (0)
+
+
+#define __flush_tlb_global()                    flush_tlb_all()
+#define flush_tlb()                             flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)                      \
+do {                                                            \
+        unsigned long __s __attribute__((unused)) = (start);    \
+        unsigned long __e __attribute__((unused)) = (end);      \
+        flush_tlb_all();                                        \
+} while (0)
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+
+#define flush_tlb_pgtables(mm, start, end)      do {} while (0)
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/arch/mn10300/include/asm/topology.h b/arch/mn10300/include/asm/topology.h
new file mode 100644
index 000000000000..5428f333a02c
--- /dev/null
+++ b/arch/mn10300/include/asm/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
new file mode 100644
index 000000000000..7b9f01042fd4
--- /dev/null
+++ b/arch/mn10300/include/asm/types.h
@@ -0,0 +1,38 @@
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
new file mode 100644
index 000000000000..8a3a4dd55763
--- /dev/null
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -0,0 +1,490 @@
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#define KERNEL_XDS      MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS       MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS         MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current_thread_info()->addr_limit)
+#define set_fs(x)       (current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+        ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+        int flag = 1, tmp;
+
+        asm("   add     %3,%1   \n"     /* set C-flag if addr + size > 4Gb */
+            "   bcs     0f      \n"
+            "   cmp     %4,%1   \n"     /* jump if addr+size>limit (error) */
+            "   bhi     0f      \n"
+            "   clr     %0      \n"     /* mark okay */
+            "0:                 \n"
+            : "=r"(flag), "=&r"(tmp)
+            : "1"(addr), "ir"(size),
+              "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+            : "cc"
+            );
+
+        return flag;
+}
+
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size)     (__range_ok((addr), (size)) == 0)
+
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+        return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern int fixup_exception(struct pt_regs *regs);
+
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x, ptr, ret) \
+        ({ if (put_user((x), (ptr)))    return (ret); })
+#define get_user_ret(x, ptr, ret) \
+        ({ if (get_user((x), (ptr)))    return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+        ({ if (__put_user((x), (ptr)))  return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+        ({ if (__get_user((x), (ptr)))  return (ret); })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_nocheck(x, ptr, size)        \
+({                                              \
+        __typeof(*(ptr)) __gu_val;              \
+        unsigned long __gu_addr;                \
+        int __gu_err;                           \
+        __gu_addr = (unsigned long) (ptr);      \
+        switch (size) {                         \
+        case 1:  __get_user_asm("bu"); break;   \
+        case 2:  __get_user_asm("hu"); break;   \
+        case 4:  __get_user_asm(""  ); break;   \
+        default: __get_user_unknown(); break;   \
+        }                                       \
+        x = (__typeof__(*(ptr))) __gu_val;      \
+        __gu_err;                               \
+})
+
+#define __get_user_check(x, ptr, size)                  \
+({                                                      \
+        __typeof__(*(ptr)) __gu_val;                    \
+        unsigned long __gu_addr;                        \
+        int __gu_err;                                   \
+        __gu_addr = (unsigned long) (ptr);              \
+        if (likely(__access_ok(__gu_addr,size))) {      \
+                switch (size) {                         \
+                case 1:  __get_user_asm("bu"); break;   \
+                case 2:  __get_user_asm("hu"); break;   \
+                case 4:  __get_user_asm(""  ); break;   \
+                default: __get_user_unknown(); break;   \
+                }                                       \
+        }                                               \
+        else {                                          \
+                __gu_err = -EFAULT;                     \
+                __gu_val = 0;                           \
+        }                                               \
+        x = (__typeof__(*(ptr))) __gu_val;              \
+        __gu_err;                                       \
+})
+
+#define __get_user_asm(INSN)                                    \
+({                                                              \
+        asm volatile(                                   \
+                "1:\n"                                          \
+                "       mov"INSN"       %2,%1\n"                \
+                "       mov             0,%0\n"                 \
+                "2:\n"                                          \
+                "       .section        .fixup,\"ax\"\n"        \
+                "3:\n\t"                                        \
+                "       mov             %3,%0\n"                \
+                "       jmp             2b\n"                   \
+                "       .previous\n"                            \
+                "       .section        __ex_table,\"a\"\n"     \
+                "       .balign         4\n"                    \
+                "       .long           1b, 3b\n"               \
+                "       .previous"                              \
+                : "=&r" (__gu_err), "=&r" (__gu_val)            \
+                : "m" (__m(__gu_addr)), "i" (-EFAULT));         \
+})
+
+extern int __get_user_unknown(void);
+
+#define __put_user_nocheck(x, ptr, size)                        \
+({                                                              \
+        union {                                                 \
+                __typeof__(*(ptr)) val;                         \
+                u32 bits[2];                                    \
+        } __pu_val;                                             \
+        unsigned long __pu_addr;                                \
+        int __pu_err;                                           \
+        __pu_val.val = (x);                                     \
+        __pu_addr = (unsigned long) (ptr);                      \
+        switch (size) {                                         \
+        case 1:  __put_user_asm("bu"); break;                   \
+        case 2:  __put_user_asm("hu"); break;                   \
+        case 4:  __put_user_asm(""  ); break;                   \
+        case 8:  __put_user_asm8();    break;                   \
+        default: __pu_err = __put_user_unknown(); break;        \
+        }                                                       \
+        __pu_err;                                               \
+})
+
+#define __put_user_check(x, ptr, size)                                  \
+({                                                                      \
+        union {                                                         \
+                __typeof__(*(ptr)) val;                                 \
+                u32 bits[2];                                            \
+        } __pu_val;                                                     \
+        unsigned long __pu_addr;                                        \
+        int __pu_err;                                                   \
+        __pu_val.val = (x);                                             \
+        __pu_addr = (unsigned long) (ptr);                              \
+        if (likely(__access_ok(__pu_addr, size))) {                     \
+                switch (size) {                                         \
+                case 1:  __put_user_asm("bu"); break;                   \
+                case 2:  __put_user_asm("hu"); break;                   \
+                case 4:  __put_user_asm(""  ); break;                   \
+                case 8:  __put_user_asm8();    break;                   \
+                default: __pu_err = __put_user_unknown(); break;        \
+                }                                                       \
+        }                                                               \
+        else {                                                          \
+                __pu_err = -EFAULT;                                     \
+        }                                                               \
+        __pu_err;                                                       \
+})
+
+#define __put_user_asm(INSN)                                    \
+({                                                              \
+        asm volatile(                                           \
+                "1:\n"                                          \
+                "       mov"INSN"       %1,%2\n"                \
+                "       mov             0,%0\n"                 \
+                "2:\n"                                          \
+                "       .section        .fixup,\"ax\"\n"        \
+                "3:\n"                                          \
+                "       mov             %3,%0\n"                \
+                "       jmp             2b\n"                   \
+                "       .previous\n"                            \
+                "       .section        __ex_table,\"a\"\n"     \
+                "       .balign         4\n"                    \
+                "       .long           1b, 3b\n"               \
+                "       .previous"                              \
+                : "=&r" (__pu_err)                              \
+                : "r" (__pu_val.val), "m" (__m(__pu_addr)),     \
+                  "i" (-EFAULT)                                 \
+                );                                              \
+})
+
+#define __put_user_asm8()                                               \
+({                                                                      \
+        asm volatile(                                                   \
+                "1:     mov             %1,%3           \n"             \
+                "2:     mov             %2,%4           \n"             \
+                "       mov             0,%0            \n"             \
+                "3:                                     \n"             \
+                "       .section        .fixup,\"ax\"   \n"             \
+                "4:                                     \n"             \
+                "       mov             %5,%0           \n"             \
+                "       jmp             3b              \n"             \
+                "       .previous                       \n"             \
+                "       .section        __ex_table,\"a\"\n"             \
+                "       .balign         4               \n"             \
+                "       .long           1b, 4b          \n"             \
+                "       .long           2b, 4b          \n"             \
+                "       .previous                       \n"             \
+                : "=&r" (__pu_err)                                      \
+                : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]),       \
+                  "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)),         \
+                  "i" (-EFAULT)                                         \
+                );                                                      \
+})
+
+extern int __put_user_unknown(void);
+
+
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy.  */
+#define __copy_user(to, from, size)                                     \
+do {                                                                    \
+        if (size) {                                                     \
+                void *__to = to;                                        \
+                const void *__from = from;                              \
+                int w;                                                  \
+                asm volatile(                                           \
+                        "0:     movbu   (%0),%3;\n"                     \
+                        "1:     movbu   %3,(%1);\n"                     \
+                        "       inc     %0;\n"                          \
+                        "       inc     %1;\n"                          \
+                        "       add     -1,%2;\n"                       \
+                        "       bne     0b;\n"                          \
+                        "2:\n"                                          \
+                        "       .section .fixup,\"ax\"\n"               \
+                        "3:     jmp     2b\n"                           \
+                        "       .previous\n"                            \
+                        "       .section __ex_table,\"a\"\n"            \
+                        "       .balign 4\n"                            \
+                        "       .long   0b,3b\n"                        \
+                        "       .long   1b,3b\n"                        \
+                        "       .previous\n"                            \
+                        : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+                        : "0"(__from), "1"(__to), "2"(size)             \
+                        : "memory");                                    \
+        }                                                               \
+} while (0)
+
+#define __copy_user_zeroing(to, from, size)                             \
+do {                                                                    \
+        if (size) {                                                     \
+                void *__to = to;                                        \
+                const void *__from = from;                              \
+                int w;                                                  \
+                asm volatile(                                           \
+                        "0:     movbu   (%0),%3;\n"                     \
+                        "1:     movbu   %3,(%1);\n"                     \
+                        "       inc     %0;\n"                          \
+                        "       inc     %1;\n"                          \
+                        "       add     -1,%2;\n"                       \
+                        "       bne     0b;\n"                          \
+                        "2:\n"                                          \
+                        "       .section .fixup,\"ax\"\n"               \
+                        "3:\n"                                          \
+                        "       mov     %2,%0\n"                        \
+                        "       clr     %3\n"                           \
+                        "4:     movbu   %3,(%1);\n"                     \
+                        "       inc     %1;\n"                          \
+                        "       add     -1,%2;\n"                       \
+                        "       bne     4b;\n"                          \
+                        "       mov     %0,%2\n"                        \
+                        "       jmp     2b\n"                           \
+                        "       .previous\n"                            \
+                        "       .section __ex_table,\"a\"\n"            \
+                        "       .balign 4\n"                            \
+                        "       .long   0b,3b\n"                        \
+                        "       .long   1b,3b\n"                        \
+                        "       .previous\n"                            \
+                        : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+                        : "0"(__from), "1"(__to), "2"(size)             \
+                        : "memory");                                    \
+        }                                                               \
+} while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+                                               unsigned long n)
+{
+        __copy_user_zeroing(to, from, n);
+        return n;
+}
+
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+                                             unsigned long n)
+{
+        __copy_user(to, from, n);
+        return n;
+}
+
+
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size)    \
+do {                                            \
+        asm volatile(                           \
+                "       mov %0,a0;\n"           \
+                "0:     movbu (%1),d3;\n"       \
+                "1:     movbu d3,(%2);\n"       \
+                "       add -1,a0;\n"           \
+                "       bne 0b;\n"              \
+                "2:;"                           \
+                ".section .fixup,\"ax\"\n"      \
+                "3:     jmp 2b\n"               \
+                ".previous\n"                   \
+                ".section __ex_table,\"a\"\n"   \
+                "       .balign 4\n"            \
+                "       .long 0b,3b\n"          \
+                "       .long 1b,3b\n"          \
+                ".previous"                     \
+                :                               \
+                : "d"(size), "d"(to), "d"(from) \
+                : "d3", "a0");                  \
+} while (0)
+
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size)    \
+do {                                                    \
+        asm volatile(                                   \
+                "       mov %0,a0;\n"                   \
+                "0:     movbu (%1),d3;\n"               \
+                "1:     movbu d3,(%2);\n"               \
+                "       add -1,a0;\n"                   \
+                "       bne 0b;\n"                      \
+                "2:;"                                   \
+                ".section .fixup,\"ax\"\n"              \
+                "3:     jmp 2b\n"                       \
+                ".previous\n"                           \
+                ".section __ex_table,\"a\"\n"           \
+                "       .balign 4\n"                    \
+                "       .long 0b,3b\n"                  \
+                "       .long 1b,3b\n"                  \
+                ".previous"                             \
+                :                                       \
+                : "d"(size), "d"(to), "d"(from)         \
+                : "d3", "a0");                          \
+} while (0)
+
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+                                      unsigned long n)
+{
+        if (access_ok(VERIFY_WRITE, to, n))
+                __constant_copy_user(to, from, n);
+        return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+                                        unsigned long n)
+{
+        if (access_ok(VERIFY_READ, from, n))
+                __constant_copy_user_zeroing(to, from, n);
+        return n;
+}
+
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+                                              unsigned long n)
+{
+        __constant_copy_user(to, from, n);
+        return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+                                                unsigned long n)
+{
+        __constant_copy_user_zeroing(to, from, n);
+        return n;
+}
+#endif
+
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+                                            unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+                                              unsigned long);
+
+#define __copy_to_user_inatomic(to, from, n) \
+        __generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+        __generic_copy_from_user_nocheck((to), (from), (n))
+
+#define __copy_to_user(to, from, n)                     \
+({                                                      \
+        might_sleep();                                  \
+        __copy_to_user_inatomic((to), (from), (n));     \
+})
+
+#define __copy_from_user(to, from, n)                   \
+({                                                      \
+        might_sleep();                                  \
+        __copy_from_user_inatomic((to), (from), (n));   \
+})
+
+
+#define copy_to_user(to, from, n)   __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/mn10300/include/asm/ucontext.h b/arch/mn10300/include/asm/ucontext.h
new file mode 100644
index 000000000000..fcab5c1d8e18
--- /dev/null
+++ b/arch/mn10300/include/asm/ucontext.h
@@ -0,0 +1,22 @@
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+        unsigned long     uc_flags;
+        struct ucontext  *uc_link;
+        stack_t           uc_stack;
+        struct sigcontext uc_mcontext;
+        sigset_t          uc_sigmask;   /* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/arch/mn10300/include/asm/unaligned.h b/arch/mn10300/include/asm/unaligned.h
new file mode 100644
index 000000000000..0df671318ae4
--- /dev/null
+++ b/arch/mn10300/include/asm/unaligned.h
@@ -0,0 +1,20 @@
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MN10300_UNALIGNED_H
+#define _ASM_MN10300_UNALIGNED_H
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned   __get_unaligned_le
+#define put_unaligned   __put_unaligned_le
+
+#endif /* _ASM_MN10300_UNALIGNED_H */
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
new file mode 100644
index 000000000000..543a4f98695d
--- /dev/null
+++ b/arch/mn10300/include/asm/unistd.h
@@ -0,0 +1,390 @@
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lchown              16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+#define __NR_oldolduname         59
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76     /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_profil              98
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_olduname           109
+#define __NR_iopl               110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_vm86old            113
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_modify_ldt         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_vm86               166
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_chown              182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg            188     /* some people actually want streams */
+#define __NR_putpmsg            189     /* some people actually want streams */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191     /* SuS compliant getrlimit */
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_lchown32           198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_chown32            212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_madvise1           219     /* delete when C lib stub is removed */
+#define __NR_getdents64         220
+#define __NR_fcntl64            221
+/* 223 is unused */
+#define __NR_gettid             224
+#define __NR_readahead          225
+#define __NR_setxattr           226
+#define __NR_lsetxattr          227
+#define __NR_fsetxattr          228
+#define __NR_getxattr           229
+#define __NR_lgetxattr          230
+#define __NR_fgetxattr          231
+#define __NR_listxattr          232
+#define __NR_llistxattr         233
+#define __NR_flistxattr         234
+#define __NR_removexattr        235
+#define __NR_lremovexattr       236
+#define __NR_fremovexattr       237
+#define __NR_tkill              238
+#define __NR_sendfile64         239
+#define __NR_futex              240
+#define __NR_sched_setaffinity  241
+#define __NR_sched_getaffinity  242
+#define __NR_set_thread_area    243
+#define __NR_get_thread_area    244
+#define __NR_io_setup           245
+#define __NR_io_destroy         246
+#define __NR_io_getevents       247
+#define __NR_io_submit          248
+#define __NR_io_cancel          249
+#define __NR_fadvise64          250
+
+#define __NR_exit_group         252
+#define __NR_lookup_dcookie     253
+#define __NR_epoll_create       254
+#define __NR_epoll_ctl          255
+#define __NR_epoll_wait         256
+#define __NR_remap_file_pages   257
+#define __NR_set_tid_address    258
+#define __NR_timer_create       259
+#define __NR_timer_settime      (__NR_timer_create+1)
+#define __NR_timer_gettime      (__NR_timer_create+2)
+#define __NR_timer_getoverrun   (__NR_timer_create+3)
+#define __NR_timer_delete       (__NR_timer_create+4)
+#define __NR_clock_settime      (__NR_timer_create+5)
+#define __NR_clock_gettime      (__NR_timer_create+6)
+#define __NR_clock_getres       (__NR_timer_create+7)
+#define __NR_clock_nanosleep    (__NR_timer_create+8)
+#define __NR_statfs64           268
+#define __NR_fstatfs64          269
+#define __NR_tgkill             270
+#define __NR_utimes             271
+#define __NR_fadvise64_64       272
+#define __NR_vserver            273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load         283
+#define __NR_waitid             284
+#define __NR_add_key            286
+#define __NR_request_key        287
+#define __NR_keyctl             288
+#define __NR_cacheflush         289
+#define __NR_ioprio_set         290
+#define __NR_ioprio_get         291
+#define __NR_inotify_init       292
+#define __NR_inotify_add_watch  293
+#define __NR_inotify_rm_watch   294
+#define __NR_migrate_pages      295
+#define __NR_openat             296
+#define __NR_mkdirat            297
+#define __NR_mknodat            298
+#define __NR_fchownat           299
+#define __NR_futimesat          300
+#define __NR_fstatat64          301
+#define __NR_unlinkat           302
+#define __NR_renameat           303
+#define __NR_linkat             304
+#define __NR_symlinkat          305
+#define __NR_readlinkat         306
+#define __NR_fchmodat           307
+#define __NR_faccessat          308
+#define __NR_pselect6           309
+#define __NR_ppoll              310
+#define __NR_unshare            311
+#define __NR_set_robust_list    312
+#define __NR_get_robust_list    313
+#define __NR_splice             314
+#define __NR_sync_file_range    315
+#define __NR_tee                316
+#define __NR_vmsplice           317
+#define __NR_move_pages         318
+#define __NR_getcpu             319
+#define __NR_epoll_pwait        320
+#define __NR_utimensat          321
+#define __NR_signalfd           322
+#define __NR_timerfd_create     323
+#define __NR_eventfd            324
+#define __NR_fallocate          325
+#define __NR_timerfd_settime    326
+#define __NR_timerfd_gettime    327
+#define __NR_signalfd4          328
+#define __NR_eventfd2           329
+#define __NR_epoll_create1      330
+#define __NR_dup3               331
+#define __NR_pipe2              332
+#define __NR_inotify_init1      333
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 326
+
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/arch/mn10300/include/asm/user.h b/arch/mn10300/include/asm/user.h
new file mode 100644
index 000000000000..e1193908b78c
--- /dev/null
+++ b/arch/mn10300/include/asm/user.h
@@ -0,0 +1,53 @@
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+        /* We start with the registers, to mimic the way that "memory" is
+         * returned from the ptrace(3,...) function.
+         */
+        struct pt_regs regs;            /* Where the registers are actually stored */
+
+        /* The rest of this junk is to help gdb figure out what goes where */
+        unsigned long int u_tsize;      /* Text segment size (pages). */
+        unsigned long int u_dsize;      /* Data segment size (pages). */
+        unsigned long int u_ssize;      /* Stack segment size (pages). */
+        unsigned long start_code;       /* Starting virtual address of text. */
+        unsigned long start_stack;      /* Starting virtual address of stack area.
+                                           This is actually the bottom of the stack,
+                                           the top of the stack is always found in the
+                                           esp register.  */
+        long int signal;                /* Signal that caused the core dump. */
+        int reserved;                   /* No longer used */
+        struct user_pt_regs *u_ar0;     /* Used by gdb to help find the values for */
+
+        /* the registers */
+        unsigned long magic;            /* To uniquely identify a core file */
+        char u_comm[32];                /* User command that was responsible */
+};
+#endif
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR    +(u.start_code)
+#define HOST_STACK_END_ADDR     +(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/arch/mn10300/include/asm/vga.h b/arch/mn10300/include/asm/vga.h
new file mode 100644
index 000000000000..0163e50a3459
--- /dev/null
+++ b/arch/mn10300/include/asm/vga.h
@@ -0,0 +1,17 @@
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/mn10300/include/asm/xor.h b/arch/mn10300/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/mn10300/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index ceeaaaa359e2..34ab5a293153 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -20,7 +20,7 @@
 #include <asm/intctl-regs.h>
 #include <asm/busctl-regs.h>
 #include <asm/timer-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/errno.h>
diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S
index c68dcd052201..4998b24f5d3a 100644
--- a/arch/mn10300/kernel/gdb-io-serial-low.S
+++ b/arch/mn10300/kernel/gdb-io-serial-low.S
@@ -18,7 +18,7 @@
 #include <asm/thread_info.h>
 #include <asm/frame.inc>
 #include <asm/intctl-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
 
         .text
 
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 11584c51acd9..ae663dc717e9 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -22,7 +22,7 @@
 #include <asm/gdb-stub.h>
 #include <asm/exceptions.h>
 #include <asm/serial-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
 
 /*
  * initialise the GDB stub
diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S
index 677c7876307c..060b7cca735d 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm-low.S
+++ b/arch/mn10300/kernel/gdb-io-ttysm-low.S
@@ -18,7 +18,7 @@
 #include <asm/cpu-regs.h>
 #include <asm/frame.inc>
 #include <asm/intctl-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
 #include "mn10300-serial.h"
 
         .text
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index e94c25e8ca05..a560bbc3137d 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -20,7 +20,7 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/exceptions.h>
-#include <asm/unit/clock.h>
+#include <unit/clock.h>
 #include "mn10300-serial.h"
 
 #if defined(CONFIG_GDBSTUB_ON_TTYSM0)
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 0ea7482c1522..41b11706c8ed 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -136,8 +136,8 @@
 #include <asm/cacheflush.h>
 #include <asm/serial-regs.h>
 #include <asm/busctl-regs.h>
-#include <asm/unit/leds.h>
-#include <asm/unit/serial.h>
+#include <unit/leds.h>
+#include <unit/serial.h>
 
 /* define to use F7F7 rather than FF which is subverted by JTAG debugger */
 #undef GDBSTUB_USE_F7F7_AS_BREAKPOINT
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
index 606bd8c6758d..8a8309fbe3c4 100644
--- a/arch/mn10300/kernel/head.S
+++ b/arch/mn10300/kernel/head.S
@@ -17,7 +17,7 @@
 #include <asm/pgtable.h>
 #include <asm/frame.inc>
 #include <asm/param.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
 
         .section .text.head,"ax"
 
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 50fdb5c16e0c..4c3c58ef5cda 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -140,7 +140,7 @@ void __init init_IRQ(void)
         int irq;
 
         for (irq = 0; irq < NR_IRQS; irq++)
-                if (irq_desc[irq].chip == &no_irq_type)
+                if (irq_desc[irq].chip == &no_irq_chip)
                         /* due to the PIC latching interrupt requests, even
                          * when the IRQ is disabled, IRQ_PENDING is superfluous
                          * and we can use handle_level_irq() for edge-triggered
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
index ef3f4c1df2a4..224485388228 100644
--- a/arch/mn10300/kernel/mn10300-serial-low.S
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -18,8 +18,8 @@
 #include <asm/cpu-regs.h>
 #include <asm/frame.inc>
 #include <asm/timer-regs.h>
-#include <asm/proc/cache.h>
-#include <asm/unit/timex.h>
+#include <proc/cache.h>
+#include <unit/timex.h>
 #include "mn10300-serial.h"
 
 #define SCxCTR  0x00
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 59b9c4bf9583..2fd59664d00a 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -41,7 +41,7 @@ static const char serial_revdate[] = "2007-11-06";
 #include <asm/irq.h>
 #include <asm/bitops.h>
 #include <asm/serial-regs.h>
-#include <asm/unit/timex.h>
+#include <unit/timex.h>
 #include "mn10300-serial.h"
 
 static inline __attribute__((format(printf, 1, 2)))
diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c
index 2e370d88a87a..f362d9d138f1 100644
--- a/arch/mn10300/kernel/mn10300-watchdog.c
+++ b/arch/mn10300/kernel/mn10300-watchdog.c
@@ -25,7 +25,7 @@
 #include <asm/div64.h>
 #include <asm/smp.h>
 #include <asm/gdb-stub.h>
-#include <asm/proc/clock.h>
+#include <proc/clock.h>
 
 static DEFINE_SPINLOCK(watchdog_print_lock);
 static unsigned int watchdog;
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index e1d88ab51008..71414e19fd16 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -30,7 +30,7 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/smp.h>
-#include <asm/proc/proc.h>
+#include <proc/proc.h>
 #include <asm/busctl-regs.h>
 #include <asm/fpu.h>
 #include <asm/sections.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index fcb9a03d46a8..681ad8c9e4fb 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -37,7 +37,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cpu-regs.h>
 #include <asm/busctl-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
 #include <asm/fpu.h>
 #include <asm/gdb-stub.h>
 #include <asm/sections.h>
diff --git a/arch/mn10300/oprofile/Kconfig b/arch/mn10300/oprofile/Kconfig
deleted file mode 100644
index 19d37730b664..000000000000
--- a/arch/mn10300/oprofile/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-
-menu "Profiling support"
-        depends on EXPERIMENTAL
-
-config PROFILING
-        bool "Profiling support (EXPERIMENTAL)"
-        help
-          Say Y here to enable the extended profiling support mechanisms used
-          by profilers such as OProfile.
-
-
-config OPROFILE
-        tristate "OProfile system profiling (EXPERIMENTAL)"
-        depends on PROFILING
-        help
-          OProfile is a profiling system capable of profiling the
-          whole system, include the kernel, kernel modules, libraries,
-          and applications.
-
-          If unsure, say N.
-
-endmenu
-
diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h
new file mode 100644
index 000000000000..bdc1f9a59b4c
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h
@@ -0,0 +1,33 @@
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS          4       /* number of ways in caches */
+#define L1_CACHE_NENTRIES       256     /* number of entries in each way */
+#define L1_CACHE_BYTES          16      /* bytes per entry */
+#define L1_CACHE_SHIFT          4       /* shift for bytes per entry */
+#define L1_CACHE_WAYDISP        0x1000  /* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID      0x00000001      /* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY      0x00000008      /* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY      0x00000ff0      /* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS    0xfffff000      /* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL     4
+
+#endif /* _ASM_PROC_CACHE_H */
diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h
new file mode 100644
index 000000000000..aa23e147d620
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/include/proc/clock.h
@@ -0,0 +1,18 @@
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <unit/clock.h>
+
+#define MN10300_WDCLK           MN10300_IOCLK
+
+#endif /* _ASM_PROC_CLOCK_H */
diff --git a/arch/mn10300/proc-mn103e010/include/proc/irq.h b/arch/mn10300/proc-mn103e010/include/proc/irq.h
new file mode 100644
index 000000000000..aa6ee8f98b1b
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/include/proc/irq.h
@@ -0,0 +1,34 @@
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS          42
+
+#define GxICR_NUM_XIRQS         8
+
+#define XIRQ0           34
+#define XIRQ1           35
+#define XIRQ2           36
+#define XIRQ3           37
+#define XIRQ4           38
+#define XIRQ5           39
+#define XIRQ6           40
+#define XIRQ7           41
+
+#define XIRQ2IRQ(num)   (XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */
diff --git a/arch/mn10300/proc-mn103e010/include/proc/proc.h b/arch/mn10300/proc-mn103e010/include/proc/proc.h
new file mode 100644
index 000000000000..22a2b93f70b7
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/include/proc/proc.h
@@ -0,0 +1,18 @@
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME   "Matsushita"
+#define PROCESSOR_MODEL_NAME    "mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */
diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h
new file mode 100644
index 000000000000..8b450e920af1
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/include/unit/clock.h
@@ -0,0 +1,45 @@
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;     /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK           ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK       ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK           33333333UL
+/* #define MN10300_IOBCLK       66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK           MN10300_IOCLK
+#define MN10300_TSCCLK          MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ      ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ      (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/unit-asb2303/include/unit/leds.h b/arch/mn10300/unit-asb2303/include/unit/leds.h
new file mode 100644
index 000000000000..3a7543ea7b5c
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/include/unit/leds.h
@@ -0,0 +1,43 @@
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF        __SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS        __SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF)                      \
+do {                                                    \
+        ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f;       \
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds                     \
+        mov     0x43,d0                 ;       \
+        movbu   d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h
new file mode 100644
index 000000000000..047566cd2e36
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/include/unit/serial.h
@@ -0,0 +1,136 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS       0xA6FC0000
+
+#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS                                                \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },                                                              \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT1_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE)                                     \
+do {                                                            \
+        while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}     \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                                  \
+do {                                                            \
+        while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}      \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                     \
+do {                                            \
+        GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE)                       \
+do {                                            \
+        GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;  \
+} while (0)
+#define FLOWCTL_QUERY(LINE)     ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+        char ch;
+
+        FLOWCTL_SET(DTR);
+
+        for (; n > 0; n--) {
+                LSR_WAIT_FOR(THRE);
+                FLOWCTL_WAIT_FOR(CTS);
+
+                ch = *p++;
+                if (ch == 0x0a) {
+                        GDBPORT_SERIAL_TX = 0x0d;
+                        LSR_WAIT_FOR(THRE);
+                        FLOWCTL_WAIT_FOR(CTS);
+                }
+                GDBPORT_SERIAL_TX = ch;
+        }
+
+        FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/arch/mn10300/unit-asb2303/include/unit/smc91111.h
new file mode 100644
index 000000000000..dd456e9c513f
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/include/unit/smc91111.h
@@ -0,0 +1,50 @@
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE           0xAA000300UL
+#define SMC91111_BASE_END       0xAA000400UL
+#define SMC91111_IRQ            XIRQ3
+
+#define SMC_CAN_USE_8BIT        0
+#define SMC_CAN_USE_16BIT       1
+#define SMC_CAN_USE_32BIT       0
+#define SMC_NOWAIT              1
+#define SMC_IRQ_FLAGS           (0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r)           inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r)       outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r)           inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r)       outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l)    insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l)   outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r)           inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r)       outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l)    insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l)   outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT         RPC_LED_100_10
+#define RPC_LSB_DEFAULT         RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /*  _ASM_UNIT_SMC91111_H */
diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h
new file mode 100644
index 000000000000..f206b63c95b4
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/include/unit/timex.h
@@ -0,0 +1,135 @@
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/timer-regs.h>
+#include <unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX              0xffff
+#define TMJCBC                  TM01BC
+
+#define TMJCMD                  TM01MD
+#define TMJCBR                  TM01BR
+#define TMJCIRQ                 TM1IRQ
+#define TMJCICR                 TM1ICR
+#define TMJCICR_LEVEL           GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+        unsigned rate;
+        u16 md, t16;
+
+        /* use as little prescaling as possible to avoid losing accuracy */
+        md = TM0MD_SRC_IOCLK;
+        rate = MN10300_JCCLK / HZ;
+
+        if (rate > TMJCBR_MAX) {
+                md = TM0MD_SRC_IOCLK_8;
+                rate = MN10300_JCCLK / 8 / HZ;
+
+                if (rate > TMJCBR_MAX) {
+                        md = TM0MD_SRC_IOCLK_32;
+                        rate = MN10300_JCCLK / 32 / HZ;
+
+                        if (rate > TMJCBR_MAX)
+                                BUG();
+                }
+        }
+
+        TMJCBR = rate - 1;
+        t16 = TMJCBR;
+
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_INIT_COUNTER |
+                TM1MD_INIT_COUNTER << 8;
+
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_COUNT_ENABLE |
+                TM1MD_COUNT_ENABLE << 8;
+
+        t16 = TMJCMD;
+
+        TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+        t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX             0xffffffff
+#define TMTSCBC                 TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+        /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+         * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+         */
+        TM45BR = TMTSCBR_MAX;
+
+        TM4MD = TM4MD_SRC_IOCLK;
+        TM4MD |= TM4MD_INIT_COUNTER;
+        TM4MD &= ~TM4MD_INIT_COUNTER;
+        TM4ICR = 0;
+
+        TM5MD = TM5MD_SRC_TM4CASCADE;
+        TM5MD |= TM5MD_INIT_COUNTER;
+        TM5MD &= ~TM5MD_INIT_COUNTER;
+        TM5ICR = 0;
+
+        TM5MD |= TM5MD_COUNT_ENABLE;
+        TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+        TM4MD = 0;
+        TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+        return (cycles_t)TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c
index cd4bc78ccfc8..c03839357a14 100644
--- a/arch/mn10300/unit-asb2303/leds.c
+++ b/arch/mn10300/unit-asb2303/leds.c
@@ -16,7 +16,7 @@
 #include <asm/processor.h>
 #include <asm/intctl-regs.h>
 #include <asm/rtc-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
 
 #if 0
 static const u8 asb2303_led_hex_tbl[16] = {
diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c
index 30875dd65631..43c246439413 100644
--- a/arch/mn10300/unit-asb2303/smc91111.c
+++ b/arch/mn10300/unit-asb2303/smc91111.c
@@ -18,7 +18,7 @@
 #include <asm/timex.h>
 #include <asm/processor.h>
 #include <asm/intctl-regs.h>
-#include <asm/unit/smc91111.h>
+#include <unit/smc91111.h>
 
 static struct resource smc91c111_resources[] = {
         [0] = {
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
new file mode 100644
index 000000000000..7d514841ffda
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;     /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK           ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK       ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK           33333333UL
+/* #define MN10300_IOBCLK       66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK           MN10300_IOCLK
+#define MN10300_TSCCLK          MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ      ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ      (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h
new file mode 100644
index 000000000000..bc471f617fd1
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS        __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()               \
+do {                                            \
+        P0OUT &= 0xbf;                          \
+        P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;    \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds                     \
+        mov     0x43077f1d,d0           ;       \
+        mov     d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)                              \
+do {                                                            \
+        ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;   \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h
new file mode 100644
index 000000000000..3bfc90938787
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
+#define ASB2305_DEBUG_MCR       __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS                                                \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX        __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE)                             \
+do {                                                    \
+        while (!(TTYS0_LSR & UART_LSR_##STATE)) {}      \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                          \
+do {                                                    \
+        while (!(TTYS0_MSR & UART_MSR_##LINE)) {}       \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                     \
+do {                                            \
+        TTYS0_MCR &= ~UART_MCR_##LINE;          \
+} while (0)
+#define FLOWCTL_SET(LINE)                       \
+do {                                            \
+        TTYS0_MCR |= UART_MCR_##LINE;           \
+} while (0)
+#define FLOWCTL_QUERY(LINE)     ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+        char ch;
+
+        FLOWCTL_SET(DTR);
+
+        for (; n > 0; n--) {
+                LSR_WAIT_FOR(THRE);
+                FLOWCTL_WAIT_FOR(CTS);
+
+                ch = *p++;
+                if (ch == 0x0a) {
+                        TTYS0_TX = 0x0d;
+                        LSR_WAIT_FOR(THRE);
+                        FLOWCTL_WAIT_FOR(CTS);
+                }
+                TTYS0_TX = ch;
+        }
+
+        FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
new file mode 100644
index 000000000000..a71c49aa85eb
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX              0xffff
+#define TMJCBC                  TM01BC
+
+#define TMJCMD                  TM01MD
+#define TMJCBR                  TM01BR
+#define TMJCIRQ                 TM1IRQ
+#define TMJCICR                 TM1ICR
+#define TMJCICR_LEVEL           GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+        unsigned rate;
+        u16 md, t16;
+
+        /* use as little prescaling as possible to avoid losing accuracy */
+        md = TM0MD_SRC_IOCLK;
+        rate = MN10300_JCCLK / HZ;
+
+        if (rate > TMJCBR_MAX) {
+                md = TM0MD_SRC_IOCLK_8;
+                rate = MN10300_JCCLK / 8 / HZ;
+
+                if (rate > TMJCBR_MAX) {
+                        md = TM0MD_SRC_IOCLK_32;
+                        rate = MN10300_JCCLK / 32 / HZ;
+
+                        if (rate > TMJCBR_MAX)
+                                BUG();
+                }
+        }
+
+        TMJCBR = rate - 1;
+        t16 = TMJCBR;
+
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_INIT_COUNTER |
+                TM1MD_INIT_COUNTER << 8;
+
+        TMJCMD =
+                md |
+                TM1MD_SRC_TM0CASCADE << 8 |
+                TM0MD_COUNT_ENABLE |
+                TM1MD_COUNT_ENABLE << 8;
+
+        t16 = TMJCMD;
+
+        TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+        t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX             0xffffffff
+#define TMTSCBC                 TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+        /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+         * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+         */
+        TM45BR = TMTSCBR_MAX;
+
+        TM4MD = TM4MD_SRC_IOCLK;
+        TM4MD |= TM4MD_INIT_COUNTER;
+        TM4MD &= ~TM4MD_INIT_COUNTER;
+        TM4ICR = 0;
+
+        TM5MD = TM5MD_SRC_TM4CASCADE;
+        TM5MD |= TM5MD_INIT_COUNTER;
+        TM5MD &= ~TM5MD_INIT_COUNTER;
+        TM5ICR = 0;
+
+        TM5MD |= TM5MD_COUNT_ENABLE;
+        TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+        TM4MD = 0;
+        TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+        return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
index e99dcc9cee1a..d345ff9042d5 100644
--- a/arch/mn10300/unit-asb2305/leds.c
+++ b/arch/mn10300/unit-asb2305/leds.c
@@ -15,7 +15,7 @@
 #include <asm/processor.h>
 #include <asm/cpu/intctl-regs.h>
 #include <asm/cpu/rtc-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
 
 static const u8 asb2305_led_hex_tbl[16] = {
         0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index 72812a9439ac..1c452cc3f6e9 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -18,7 +18,7 @@
 #include <asm/cpu/intctl-regs.h>
 #include <asm/cpu/rtc-regs.h>
 #include <asm/cpu/serial-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
 
 /*
  * initialise some of the unit hardware before gdbstub is set up
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index dcb667c4375a..2eca5fe0e75b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -82,6 +82,7 @@ config S390
         select USE_GENERIC_SMP_HELPERS if SMP
         select HAVE_SYSCALL_WRAPPERS
         select HAVE_FUNCTION_TRACER
+        select HAVE_DEFAULT_NO_SPIN_MUTEXES
         select HAVE_OPROFILE
         select HAVE_KPROBES
         select HAVE_KRETPROBES
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 031f038b19f7..b8eb71ef3163 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -392,8 +392,10 @@
 #define __NR_pipe2              321
 #define __NR_inotify_init1      322
 #define __NR_accept4            323
+#define __NR_preadv             324
+#define __NR_pwritev            325
 
-#define NR_SYSCALLS             324
+#define NR_SYSCALLS             326
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index b4a12c9aa5f8..27381f1baffc 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -99,8 +99,7 @@ static inline u64 of_read_addr(const u32 *cell, int size)
         return r;
 }
 
-static void __init get_cells(struct device_node *dp,
-                             int *addrc, int *sizec)
+static void get_cells(struct device_node *dp, int *addrc, int *sizec)
 {
         if (addrc)
                 *addrc = of_n_addr_cells(dp);
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index 9462b68f4894..d53f45bc7dda 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -409,8 +409,8 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm)
         upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB);
 }
 
-static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm,
-                                    struct of_device *op, u32 portid)
+static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm,
+                                       struct of_device *op, u32 portid)
 {
         const struct linux_prom64_registers *regs;
         struct device_node *dp = op->node;
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 3b34344082ef..142b9d6984a8 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -365,8 +365,8 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm)
         pci_config_write8(addr, 64);
 }
 
-static void __init psycho_scan_bus(struct pci_pbm_info *pbm,
-                                   struct device *parent)
+static void __devinit psycho_scan_bus(struct pci_pbm_info *pbm,
+                                      struct device *parent)
 {
         pbm_config_busmastering(pbm);
         pbm->is_66mhz_capable = 0;
@@ -482,8 +482,8 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
 #define PSYCHO_MEMSPACE_B       0x180000000UL
 #define PSYCHO_MEMSPACE_SIZE    0x07fffffffUL
 
-static void __init psycho_pbm_init(struct pci_pbm_info *pbm,
-                                   struct of_device *op, int is_pbm_a)
+static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm,
+                                      struct of_device *op, int is_pbm_a)
 {
         psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO);
         psycho_pbm_strbuf_init(pbm, is_pbm_a);
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 713257b6963c..ba6fbeba3e2c 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -402,8 +402,8 @@ static void apb_init(struct pci_bus *sabre_bus)
         }
 }
 
-static void __init sabre_scan_bus(struct pci_pbm_info *pbm,
-                                  struct device *parent)
+static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm,
+                                     struct device *parent)
 {
         static int once;
 
@@ -442,8 +442,8 @@ static void __init sabre_scan_bus(struct pci_pbm_info *pbm,
         sabre_register_error_handlers(pbm);
 }
 
-static void __init sabre_pbm_init(struct pci_pbm_info *pbm,
-                                  struct of_device *op)
+static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
+                                     struct of_device *op)
 {
         psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
         pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 0ef0ab3d4763..5db5ebed35da 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -545,8 +545,8 @@ static const struct dma_ops sun4v_dma_ops = {
         .sync_sg_for_cpu                = dma_4v_sync_sg_for_cpu,
 };
 
-static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
-                                      struct device *parent)
+static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
+                                         struct device *parent)
 {
         struct property *prop;
         struct device_node *dp;
@@ -559,8 +559,8 @@ static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
         /* XXX register error interrupt handlers XXX */
 }
 
-static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm,
-                                                   struct iommu *iommu)
+static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm,
+                                                      struct iommu *iommu)
 {
         struct iommu_arena *arena = &iommu->arena;
         unsigned long i, cnt = 0;
@@ -587,7 +587,7 @@ static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm,
         return cnt;
 }
 
-static int __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
+static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 {
         static const u32 vdma_default[] = { 0x80000000, 0x80000000 };
         struct iommu *iommu = pbm->iommu;
@@ -889,8 +889,8 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 }
 #endif /* !(CONFIG_PCI_MSI) */
 
-static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
-                                     struct of_device *op, u32 devhandle)
+static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
+                                        struct of_device *op, u32 devhandle)
 {
         struct device_node *dp = op->node;
         int err;
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index ae88f06a7ec4..e2a045c235a1 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -23,7 +23,7 @@ static irqreturn_t power_handler(int irq, void *dev_id)
         return IRQ_HANDLED;
 }
 
-static int __init has_button_interrupt(unsigned int irq, struct device_node *dp)
+static int __devinit has_button_interrupt(unsigned int irq, struct device_node *dp)
 {
         if (irq == 0xffffffff)
                 return 0;
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index dccc95df0c7f..00ec3b15f38c 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -81,4 +81,4 @@ sys_call_table:
 /*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
+/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index a8000b1cda74..82b5bf85b9d2 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -82,7 +82,7 @@ sys_call_table32:
         .word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
         .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev
 
 #endif /* CONFIG_COMPAT */
 
@@ -156,4 +156,4 @@ sys_call_table:
         .word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
         .word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 2c8dfeb7ab04..f26a352c08a0 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -70,8 +70,8 @@ extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES];
 
 #define MAX_BANKS       32
 
-static struct linux_prom64_registers pavail[MAX_BANKS] __initdata;
-static int pavail_ents __initdata;
+static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata;
+static int pavail_ents __devinitdata;
 
 static int cmp_p64(const void *a, const void *b)
 {
@@ -968,7 +968,7 @@ int of_node_to_nid(struct device_node *dp)
         return nid;
 }
 
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
 {
         int i;
 
@@ -1841,7 +1841,7 @@ void __init paging_init(void)
         printk("Booting Linux...\n");
 }
 
-int __init page_in_phys_avail(unsigned long paddr)
+int __devinit page_in_phys_avail(unsigned long paddr)
 {
         int i;
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4b3408206091..bc25b9f5e4cd 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -252,17 +252,13 @@ config SMP
 
 config X86_X2APIC
         bool "Support x2apic"
-        depends on X86_LOCAL_APIC && X86_64
-        select INTR_REMAP
+        depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
         ---help---
           This enables x2apic support on CPUs that have this feature.
 
           This allows 32-bit apic IDs (so it can support very large systems),
           and accesses the local apic via MSRs not via mmio.
 
-          ( On certain CPU models you may need to enable INTR_REMAP too,
-            to get functional x2apic mode. )
-
           If you don't know what to do here, say N.
 
 config SPARSE_IRQ
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 95d86ce0421c..9e0587a37768 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -129,22 +129,18 @@ u16 vga_crtc(void)
         return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4;
 }
 
-static void vga_set_480_scanlines(int lines)
+static void vga_set_480_scanlines(void)
 {
         u16 crtc;               /* CRTC base address */
         u8  csel;               /* CRTC miscellaneous output register */
-        u8  ovfw;               /* CRTC overflow register */
-        int end = lines-1;
 
         crtc = vga_crtc();
 
-        ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
-
         out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */
         out_idx(0x0b, crtc, 0x06); /* Vertical total */
-        out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
+        out_idx(0x3e, crtc, 0x07); /* Vertical overflow */
         out_idx(0xea, crtc, 0x10); /* Vertical sync start */
-        out_idx(end,  crtc, 0x12); /* Vertical display end */
+        out_idx(0xdf, crtc, 0x12); /* Vertical display end */
         out_idx(0xe7, crtc, 0x15); /* Vertical blank start */
         out_idx(0x04, crtc, 0x16); /* Vertical blank end */
         csel = inb(0x3cc);
@@ -153,21 +149,38 @@ static void vga_set_480_scanlines(int lines)
         outb(csel, 0x3c2);
 }
 
+static void vga_set_vertical_end(int lines)
+{
+        u16 crtc;               /* CRTC base address */
+        u8  ovfw;               /* CRTC overflow register */
+        int end = lines-1;
+
+        crtc = vga_crtc();
+
+        ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
+
+        out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
+        out_idx(end,  crtc, 0x12); /* Vertical display end */
+}
+
 static void vga_set_80x30(void)
 {
-        vga_set_480_scanlines(30*16);
+        vga_set_480_scanlines();
+        vga_set_vertical_end(30*16);
 }
 
 static void vga_set_80x34(void)
 {
+        vga_set_480_scanlines();
         vga_set_14font();
-        vga_set_480_scanlines(34*14);
+        vga_set_vertical_end(34*14);
 }
 
 static void vga_set_80x60(void)
 {
+        vga_set_480_scanlines();
         vga_set_8font();
-        vga_set_480_scanlines(60*8);
+        vga_set_vertical_end(60*8);
 }
 
 static int vga_set_mode(struct mode_info *mode)
diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h
index 222802029fa6..222802029fa6 100755..100644
--- a/arch/x86/include/asm/cpu_debug.h
+++ b/arch/x86/include/asm/cpu_debug.h
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 0beba0d1468d..bb83b1c397aa 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -154,6 +154,7 @@
  * CPUID levels like 0x6, 0xA etc
  */
 #define X86_FEATURE_IDA         (7*32+ 0) /* Intel Dynamic Acceleration */
+#define X86_FEATURE_ARAT        (7*32+ 1) /* Always Running APIC Timer */
 
 /* Virtualization flags: Linux defined */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 81937a5dc77c..2d81af3974a0 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -151,11 +151,11 @@ extern pte_t *pkmap_page_table;
 
 void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
 void native_set_fixmap(enum fixed_addresses idx,
-                       unsigned long phys, pgprot_t flags);
+                       phys_addr_t phys, pgprot_t flags);
 
 #ifndef CONFIG_PARAVIRT
 static inline void __set_fixmap(enum fixed_addresses idx,
-                                unsigned long phys, pgprot_t flags)
+                                phys_addr_t phys, pgprot_t flags)
 {
         native_set_fixmap(idx, phys, flags);
 }
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index e5383e3d2f8c..73739322b6d0 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -193,8 +193,10 @@ extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
  */
 extern void early_ioremap_init(void);
 extern void early_ioremap_reset(void);
-extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
-extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
+extern void __iomem *early_ioremap(resource_size_t phys_addr,
+                                   unsigned long size);
+extern void __iomem *early_memremap(resource_size_t phys_addr,
+                                    unsigned long size);
 extern void early_iounmap(void __iomem *addr, unsigned long size);
 
 #define IO_SPACE_LIMIT 0xffff
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 7727aa8b7dda..378e3691c08c 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -347,7 +347,7 @@ struct pv_mmu_ops {
         /* Sometimes the physical address is a pfn, and sometimes its
            an mfn.  We can tell which is which from the index. */
         void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
-                           unsigned long phys, pgprot_t flags);
+                           phys_addr_t phys, pgprot_t flags);
 };
 
 struct raw_spinlock;
@@ -1432,7 +1432,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
 void arch_flush_lazy_mmu_mode(void);
 
 static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
-                                unsigned long phys, pgprot_t flags)
+                                phys_addr_t phys, pgprot_t flags)
 {
         pv_mmu_ops.set_fixmap(idx, phys, flags);
 }
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 34c52370f2fe..fcf4d92e7e04 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -352,6 +352,11 @@ struct i387_soft_struct {
         u32                     entry_eip;
 };
 
+struct ymmh_struct {
+        /* 16 * 16 bytes for each YMMH-reg = 256 bytes */
+        u32 ymmh_space[64];
+};
+
 struct xsave_hdr_struct {
         u64 xstate_bv;
         u64 reserved1[2];
@@ -361,6 +366,7 @@ struct xsave_hdr_struct {
 struct xsave_struct {
         struct i387_fxsave_struct i387;
         struct xsave_hdr_struct xsave_hdr;
+        struct ymmh_struct ymmh;
         /* new processor state extensions will go here */
 } __attribute__ ((packed, aligned (64)));
 
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index ec666491aaa4..72e5a4491661 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -269,6 +269,11 @@ struct _xsave_hdr {
         __u64 reserved2[5];
 };
 
+struct _ymmh_state {
+        /* 16 * 16 bytes for each YMMH-reg */
+        __u32 ymmh_space[64];
+};
+
 /*
  * Extended state pointed by the fpstate pointer in the sigcontext.
  * In addition to the fpstate, information encoded in the xstate_hdr
@@ -278,6 +283,7 @@ struct _xsave_hdr {
 struct _xstate {
         struct _fpstate fpstate;
         struct _xsave_hdr xstate_hdr;
+        struct _ymmh_state ymmh;
         /* new processor state extensions go here */
 };
 
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
index 08e9a1ac07a9..727acc152344 100644
--- a/arch/x86/include/asm/xsave.h
+++ b/arch/x86/include/asm/xsave.h
@@ -7,6 +7,7 @@
 
 #define XSTATE_FP       0x1
 #define XSTATE_SSE      0x2
+#define XSTATE_YMM      0x4
 
 #define XSTATE_FPSSE    (XSTATE_FP | XSTATE_SSE)
 
@@ -15,7 +16,7 @@
 /*
  * These are the features that the OS can handle currently.
  */
-#define XCNTXT_MASK     (XSTATE_FP | XSTATE_SSE)
+#define XCNTXT_MASK     (XSTATE_FP | XSTATE_SSE | XSTATE_YMM)
 
 #ifdef CONFIG_X86_64
 #define REX_PREFIX      "0x48, "
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 098ec84b8c00..f2870920f246 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -431,6 +431,12 @@ static void __cpuinit setup_APIC_timer(void)
 {
         struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 
+        if (cpu_has(&current_cpu_data, X86_FEATURE_ARAT)) {
+                lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
+                /* Make LAPIC timer preferrable over percpu HPET */
+                lapic_clockevent.rating = 150;
+        }
+
         memcpy(levt, &lapic_clockevent, sizeof(*levt));
         levt->cpumask = cpumask_of(smp_processor_id());
 
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 0014714ea97b..306e5e88fb6f 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -212,7 +212,7 @@ struct apic apic_flat =  {
         .trampoline_phys_high           = DEFAULT_TRAMPOLINE_PHYS_HIGH,
         .wait_for_init_deassert         = NULL,
         .smp_callin_clear_local_apic    = NULL,
-        .inquire_remote_apic            = NULL,
+        .inquire_remote_apic            = default_inquire_remote_apic,
 
         .read                           = native_apic_mem_read,
         .write                          = native_apic_mem_write,
@@ -362,7 +362,7 @@ struct apic apic_physflat =  {
         .trampoline_phys_high           = DEFAULT_TRAMPOLINE_PHYS_HIGH,
         .wait_for_init_deassert         = NULL,
         .smp_callin_clear_local_apic    = NULL,
-        .inquire_remote_apic            = NULL,
+        .inquire_remote_apic            = default_inquire_remote_apic,
 
         .read                           = native_apic_mem_read,
         .write                          = native_apic_mem_write,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 767fe7e46d68..a2789e42e162 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2524,7 +2524,6 @@ static void irq_complete_move(struct irq_desc **descp)
 static inline void irq_complete_move(struct irq_desc **descp) {}
 #endif
 
-#ifdef CONFIG_X86_X2APIC
 static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
 {
         int apic, pin;
@@ -2558,6 +2557,7 @@ eoi_ioapic_irq(struct irq_desc *desc)
         spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
+#ifdef CONFIG_X86_X2APIC
 static void ack_x2apic_level(unsigned int irq)
 {
         struct irq_desc *desc = irq_to_desc(irq);
@@ -2634,6 +2634,9 @@ static void ack_apic_level(unsigned int irq)
          */
         ack_APIC_irq();
 
+        if (irq_remapped(irq))
+                eoi_ioapic_irq(desc);
+
         /* Now we can move and renable the irq */
         if (unlikely(do_unmask_irq)) {
                 /* Only migrate the irq if the ack has been received.
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 8220ae69849d..c965e5212714 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -31,6 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 
         static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
                 { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
+                { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 },
                 { 0, 0, 0, 0 }
         };
 
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
index 46e29ab96c6a..46e29ab96c6a 100755..100644
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ b/arch/x86/kernel/cpu/cpu_debug.c
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 19f6b9d27e83..3e3cd3db7a0c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -68,6 +68,7 @@ struct acpi_cpufreq_data {
         unsigned int max_freq;
         unsigned int resume;
         unsigned int cpu_feature;
+        u64 saved_aperf, saved_mperf;
 };
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
@@ -152,7 +153,8 @@ struct drv_cmd {
         u32 val;
 };
 
-static long do_drv_read(void *_cmd)
+/* Called via smp_call_function_single(), on the target CPU */
+static void do_drv_read(void *_cmd)
 {
         struct drv_cmd *cmd = _cmd;
         u32 h;
@@ -169,10 +171,10 @@ static long do_drv_read(void *_cmd)
         default:
                 break;
         }
-        return 0;
 }
 
-static long do_drv_write(void *_cmd)
+/* Called via smp_call_function_many(), on the target CPUs */
+static void do_drv_write(void *_cmd)
 {
         struct drv_cmd *cmd = _cmd;
         u32 lo, hi;
@@ -191,23 +193,18 @@ static long do_drv_write(void *_cmd)
         default:
                 break;
         }
-        return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
         cmd->val = 0;
 
-        work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
+        smp_call_function_single(cpumask_any(cmd->mask), do_drv_read, cmd, 1);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
-        unsigned int i;
-
-        for_each_cpu(i, cmd->mask) {
-                work_on_cpu(i, do_drv_write, cmd);
-        }
+        smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -241,28 +238,23 @@ static u32 get_cur_val(const struct cpumask *mask)
         return cmd.val;
 }
 
-struct perf_cur {
+struct perf_pair {
         union {
                 struct {
                         u32 lo;
                         u32 hi;
                 } split;
                 u64 whole;
-        } aperf_cur, mperf_cur;
+        } aperf, mperf;
 };
 
-
-static long read_measured_perf_ctrs(void *_cur)
+/* Called via smp_call_function_single(), on the target CPU */
+static void read_measured_perf_ctrs(void *_cur)
 {
-        struct perf_cur *cur = _cur;
-
-        rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi);
-        rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi);
-
-        wrmsr(MSR_IA32_APERF, 0, 0);
-        wrmsr(MSR_IA32_MPERF, 0, 0);
+        struct perf_pair *cur = _cur;
 
-        return 0;
+        rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi);
+        rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi);
 }
 
 /*
@@ -281,52 +273,57 @@ static long read_measured_perf_ctrs(void *_cur)
 static unsigned int get_measured_perf(struct cpufreq_policy *policy,
                                       unsigned int cpu)
 {
-        struct perf_cur cur;
+        struct perf_pair readin, cur;
         unsigned int perf_percent;
         unsigned int retval;
 
-        if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur))
+        if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1))
                 return 0;
 
+        cur.aperf.whole = readin.aperf.whole -
+                                per_cpu(drv_data, cpu)->saved_aperf;
+        cur.mperf.whole = readin.mperf.whole -
+                                per_cpu(drv_data, cpu)->saved_mperf;
+        per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
+        per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+
 #ifdef __i386__
         /*
          * We dont want to do 64 bit divide with 32 bit kernel
          * Get an approximate value. Return failure in case we cannot get
          * an approximate value.
          */
-        if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) {
+        if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) {
                 int shift_count;
                 u32 h;
 
-                h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi);
+                h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi);
                 shift_count = fls(h);
 
-                cur.aperf_cur.whole >>= shift_count;
-                cur.mperf_cur.whole >>= shift_count;
+                cur.aperf.whole >>= shift_count;
+                cur.mperf.whole >>= shift_count;
         }
 
-        if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) {
+        if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {
                 int shift_count = 7;
-                cur.aperf_cur.split.lo >>= shift_count;
-                cur.mperf_cur.split.lo >>= shift_count;
+                cur.aperf.split.lo >>= shift_count;
+                cur.mperf.split.lo >>= shift_count;
         }
 
-        if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo)
-                perf_percent = (cur.aperf_cur.split.lo * 100) /
-                                cur.mperf_cur.split.lo;
+        if (cur.aperf.split.lo && cur.mperf.split.lo)
+                perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo;
         else
                 perf_percent = 0;
 
 #else
-        if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) {
+        if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) {
                 int shift_count = 7;
-                cur.aperf_cur.whole >>= shift_count;
-                cur.mperf_cur.whole >>= shift_count;
+                cur.aperf.whole >>= shift_count;
+                cur.mperf.whole >>= shift_count;
         }
 
-        if (cur.aperf_cur.whole && cur.mperf_cur.whole)
-                perf_percent = (cur.aperf_cur.whole * 100) /
-                                cur.mperf_cur.whole;
+        if (cur.aperf.whole && cur.mperf.whole)
+                perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole;
         else
                 perf_percent = 0;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index 0bd48e65a0ca..ce2ed3e4aad9 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -33,7 +33,6 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 #include <linux/acpi.h>
-#include <linux/kernel.h>
 
 #include <asm/msr.h>
 #include <acpi/processor.h>
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 70a10ca100f6..18dfa30795c9 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <linux/list.h>
 
+#include <trace/syscall.h>
+
 #include <asm/cacheflush.h>
 #include <asm/ftrace.h>
 #include <asm/nops.h>
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3aaf7b9e3a8b..c3fe010d74c8 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -65,7 +65,7 @@ static int show_other_interrupts(struct seq_file *p, int prec)
         seq_printf(p, "  Spurious interrupts\n");
 #endif
         if (generic_interrupt_extension) {
-                seq_printf(p, "PLT: ");
+                seq_printf(p, "%*s: ", prec, "PLT");
                 for_each_online_cpu(j)
                         seq_printf(p, "%10u ", irq_stats(j)->generic_irqs);
                 seq_printf(p, "  Platform interrupts\n");
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index dce99dca6cf8..70fd7e414c15 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -679,7 +679,7 @@ void __init get_smp_config(void)
         __get_smp_config(0);
 }
 
-static void smp_reserve_bootmem(struct mpf_intel *mpf)
+static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
 {
         unsigned long size = get_mpc_size(mpf->physptr);
 #ifdef CONFIG_X86_32
@@ -838,7 +838,7 @@ static int  __init get_MP_intsrc_index(struct mpc_intsrc *m)
 
 static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
 
-static void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
+static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
 {
         int i;
 
@@ -866,7 +866,8 @@ static void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
         }
 }
 #else /* CONFIG_X86_IO_APIC */
-static inline void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
+static
+inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
 #endif /* CONFIG_X86_IO_APIC */
 
 static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index fe9345c967de..23b7c8f017e2 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -21,7 +21,6 @@
 #include <linux/audit.h>
 #include <linux/seccomp.h>
 #include <linux/signal.h>
-#include <linux/ftrace.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -35,6 +34,8 @@
 #include <asm/proto.h>
 #include <asm/ds.h>
 
+#include <trace/syscall.h>
+
 #include "tls.h"
 
 enum x86_regset {
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2aef36d8aca2..1340dad417f4 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -224,6 +224,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
                         DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
                 },
         },
+        {       /* Handle problems with rebooting on Dell DXP061 */
+                .callback = set_bios_reboot,
+                .ident = "Dell DXP061",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
+                },
+        },
         { }
 };
 
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 2b54fe002e94..0a5b04aa98f1 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -324,7 +324,7 @@ void __ref xsave_cntxt_init(void)
         }
 
         /*
-         * for now OS knows only about FP/SSE
+         * Support only the state known to OS.
          */
         pcntxt_mask = pcntxt_mask & XCNTXT_MASK;
         xsave_init();
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index be54176e9eb2..6340cef6798a 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -219,6 +219,22 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
         return 1;
 }
 
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start:      starting user address
+ * @nr_pages:   number of pages from start to pin
+ * @write:      whether pages will be written to
+ * @pages:      array that receives pointers to the pages pinned.
+ *              Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
 int get_user_pages_fast(unsigned long start, int nr_pages, int write,
                         struct page **pages)
 {
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 0dfa09d69e80..09daebfdb11c 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -547,7 +547,7 @@ void __init early_ioremap_reset(void)
 }
 
 static void __init __early_set_fixmap(enum fixed_addresses idx,
-                                   unsigned long phys, pgprot_t flags)
+                                      phys_addr_t phys, pgprot_t flags)
 {
         unsigned long addr = __fix_to_virt(idx);
         pte_t *pte;
@@ -566,7 +566,7 @@ static void __init __early_set_fixmap(enum fixed_addresses idx,
 }
 
 static inline void __init early_set_fixmap(enum fixed_addresses idx,
-                                           unsigned long phys, pgprot_t prot)
+                                           phys_addr_t phys, pgprot_t prot)
 {
         if (after_paging_init)
                 __set_fixmap(idx, phys, prot);
@@ -607,9 +607,10 @@ static int __init check_early_ioremap_leak(void)
 late_initcall(check_early_ioremap_leak);
 
 static void __init __iomem *
-__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
+__early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
 {
-        unsigned long offset, last_addr;
+        unsigned long offset;
+        resource_size_t last_addr;
         unsigned int nrpages;
         enum fixed_addresses idx0, idx;
         int i, slot;
@@ -625,15 +626,15 @@ __early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
         }
 
         if (slot < 0) {
-                printk(KERN_INFO "early_iomap(%08lx, %08lx) not found slot\n",
-                         phys_addr, size);
+                printk(KERN_INFO "early_iomap(%08llx, %08lx) not found slot\n",
+                         (u64)phys_addr, size);
                 WARN_ON(1);
                 return NULL;
         }
 
         if (early_ioremap_debug) {
-                printk(KERN_INFO "early_ioremap(%08lx, %08lx) [%d] => ",
-                       phys_addr, size, slot);
+                printk(KERN_INFO "early_ioremap(%08llx, %08lx) [%d] => ",
+                       (u64)phys_addr, size, slot);
                 dump_stack();
         }
 
@@ -680,13 +681,15 @@ __early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
 }
 
 /* Remap an IO device */
-void __init __iomem *early_ioremap(unsigned long phys_addr, unsigned long size)
+void __init __iomem *
+early_ioremap(resource_size_t phys_addr, unsigned long size)
 {
         return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO);
 }
 
 /* Remap memory */
-void __init __iomem *early_memremap(unsigned long phys_addr, unsigned long size)
+void __init __iomem *
+early_memremap(resource_size_t phys_addr, unsigned long size)
 {
         return __early_ioremap(phys_addr, size, PAGE_KERNEL);
 }
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 640339ee4fb2..c009a241d562 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -31,7 +31,7 @@
 #ifdef CONFIG_X86_PAT
 int __read_mostly pat_enabled = 1;
 
-void __cpuinit pat_disable(const char *reason)
+static inline void pat_disable(const char *reason)
 {
         pat_enabled = 0;
         printk(KERN_INFO "%s\n", reason);
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 5b7c7c8464fe..7aa03a5389f5 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -345,7 +345,8 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte)
         fixmaps_set++;
 }
 
-void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
+void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
+                       pgprot_t flags)
 {
         __native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags));
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index db3802fb7b84..2a81838a9ab7 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1750,7 +1750,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 }
 #endif  /* CONFIG_X86_64 */
 
-static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
+static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot)
 {
         pte_t pte;