1 files changed, 237 insertions, 0 deletions

diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
new file mode 100644
index 000000000000..6e9b5225b8f6
--- /dev/null
+++ b/arch/xtensa/kernel/head.S
@@ -0,0 +1,237 @@
+/*
+ * arch/xtensa/kernel/head.S
+ *
+ * Xtensa Processor startup code.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Kevin Chea
+ */
+
+#include <xtensa/cacheasm.h>
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ *
+ * Prerequisites:
+ *
+ * - The kernel image has been loaded to the actual address where it was
+ *   compiled to.
+ * - a2 contains either 0 or a pointer to a list of boot parameters.
+ *   (see setup.c for more details)
+ *
+ */
+
+        .macro  iterate from, to , cmd
+                .ifeq   ((\to - \from) & ~0xfff)
+                        \cmd    \from
+                        iterate "(\from+1)", \to, \cmd
+                .endif
+        .endm
+
+/*
+ *  _start
+ *
+ *  The bootloader passes a pointer to a list of boot parameters in a2.
+ */
+
+        /* The first bytes of the kernel image must be an instruction, so we
+         * manually allocate and define the literal constant we need for a jx
+         * instruction.
+         */
+
+        .section .head.text, "ax"
+        .globl _start
+_start: _j      2f
+        .align  4
+1:      .word   _startup
+2:      l32r    a0, 1b
+        jx      a0
+
+        .text
+        .align 4
+_startup:
+
+        /* Disable interrupts and exceptions. */
+
+        movi    a0, XCHAL_PS_EXCM_MASK
+        wsr     a0, PS
+
+        /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
+
+        wsr     a2, EXCSAVE_1
+
+        /* Start with a fresh windowbase and windowstart.  */
+
+        movi    a1, 1
+        movi    a0, 0
+        wsr     a1, WINDOWSTART
+        wsr     a0, WINDOWBASE
+        rsync
+
+        /* Set a0 to 0 for the remaining initialization. */
+
+        movi    a0, 0
+
+        /* Clear debugging registers. */
+
+#if XCHAL_HAVE_DEBUG
+        wsr     a0, IBREAKENABLE
+        wsr     a0, ICOUNT
+        movi    a1, 15
+        wsr     a0, ICOUNTLEVEL
+
+        .macro reset_dbreak num
+        wsr     a0, DBREAKC + \num
+        .endm
+
+        iterate 0, XCHAL_NUM_IBREAK-1, reset_dbreak
+#endif
+
+        /* Clear CCOUNT (not really necessary, but nice) */
+
+        wsr     a0, CCOUNT      # not really necessary, but nice
+
+        /* Disable zero-loops. */
+
+#if XCHAL_HAVE_LOOPS
+        wsr     a0, LCOUNT
+#endif
+
+        /* Disable all timers. */
+
+        .macro  reset_timer     num
+        wsr     a0, CCOMPARE_0 + \num
+        .endm
+        iterate 0, XCHAL_NUM_TIMERS-1, reset_timer
+
+        /* Interrupt initialization. */
+
+        movi    a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
+        wsr     a0, INTENABLE
+        wsr     a2, INTCLEAR
+
+        /* Disable coprocessors. */
+
+#if XCHAL_CP_NUM > 0
+        wsr     a0, CPENABLE
+#endif
+
+        /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0
+         *
+         * Note: PS.EXCM must be cleared before using any loop
+         *       instructions; otherwise, they are silently disabled, and
+         *       at most one iteration of the loop is executed.
+         */
+
+        movi    a1, 1
+        wsr     a1, PS
+        rsync
+
+        /*  Initialize the caches.
+         *  Does not include flushing writeback d-cache.
+         *  a6, a7 are just working registers (clobbered).
+         */
+
+        icache_reset  a2, a3
+        dcache_reset  a2, a3
+
+        /* Unpack data sections
+         *
+         * The linker script used to build the Linux kernel image
+         * creates a table located at __boot_reloc_table_start
+         * that contans the information what data needs to be unpacked.
+         *
+         * Uses a2-a7.
+         */
+
+        movi    a2, __boot_reloc_table_start
+        movi    a3, __boot_reloc_table_end
+
+1:      beq     a2, a3, 3f      # no more entries?
+        l32i    a4, a2, 0       # start destination (in RAM)
+        l32i    a5, a2, 4       # end desination (in RAM)
+        l32i    a6, a2, 8       # start source (in ROM)
+        addi    a2, a2, 12      # next entry
+        beq     a4, a5, 1b      # skip, empty entry
+        beq     a4, a6, 1b      # skip, source and dest. are the same
+
+2:      l32i    a7, a6, 0       # load word
+        addi    a6, a6, 4
+        s32i    a7, a4, 0       # store word
+        addi    a4, a4, 4
+        bltu    a4, a5, 2b
+        j       1b
+
+3:
+        /* All code and initialized data segments have been copied.
+         * Now clear the BSS segment.
+         */
+
+        movi    a2, _bss_start  # start of BSS
+        movi    a3, _bss_end    # end of BSS
+
+1:      addi    a2, a2, 4
+        s32i    a0, a2, 0
+        blt     a2, a3, 1b
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+
+        /* After unpacking, flush the writeback cache to memory so the
+         * instructions/data are available.
+         */
+
+        dcache_writeback_all    a2, a3
+#endif
+
+        /* Setup stack and enable window exceptions (keep irqs disabled) */
+
+        movi    a1, init_thread_union
+        addi    a1, a1, KERNEL_STACK_SIZE
+
+        movi    a2, 0x00040001          # WOE=1, INTLEVEL=1, UM=0
+        wsr     a2, PS                  # (enable reg-windows; progmode stack)
+        rsync
+
+        /* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/
+
+        movi    a2, debug_exception
+        wsr     a2, EXCSAVE + XCHAL_DEBUGLEVEL
+
+        /* Set up EXCSAVE[1] to point to the exc_table. */
+
+        movi    a6, exc_table
+        xsr     a6, EXCSAVE_1
+
+        /* init_arch kick-starts the linux kernel */
+
+        movi    a4, init_arch
+        callx4  a4
+
+        movi    a4, start_kernel
+        callx4  a4
+
+should_never_return:
+        j       should_never_return
+
+        /* Define some common data structures here.  We define them
+         * here in this assembly file due to their unusual alignment
+         * requirements.
+         */
+
+        .comm   swapper_pg_dir,PAGE_SIZE,PAGE_SIZE
+        .comm   empty_bad_page_table,PAGE_SIZE,PAGE_SIZE
+        .comm   empty_bad_page,PAGE_SIZE,PAGE_SIZE
+        .comm   empty_zero_page,PAGE_SIZE,PAGE_SIZE
+