18 files changed, 133 insertions, 98 deletions

diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 2f9deca31cc9..e18eb79bf855 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -354,21 +354,6 @@ config HPET_TIMER
           as it is off-chip.  You can find the HPET spec at
           <http://www.intel.com/hardwaredesign/hpetspec.htm>.
 
-config X86_PM_TIMER
-        bool "PM timer" if EMBEDDED
-        depends on ACPI
-        default y
-        help
-          Support the ACPI PM timer for time keeping. This is slow,
-          but is useful on some chipsets without HPET on systems with more
-          than one CPU. On a single processor or single socket multi core
-          system it is normally not required.
-          When the PM timer is active 64bit vsyscalls are disabled
-          and should not be enabled (/proc/sys/kernel/vsyscall64 should
-          not be changed).
-          The kernel selects the PM timer only as a last resort, so it is
-          useful to enable just in case.
-
 config HPET_EMULATE_RTC
         bool "Provide RTC interrupt"
         depends on HPET_TIMER && RTC=y
@@ -592,6 +577,7 @@ source "arch/x86_64/oprofile/Kconfig"
 
 config KPROBES
         bool "Kprobes (EXPERIMENTAL)"
+        depends on EXPERIMENTAL && MODULES
         help
           Kprobes allows you to trap at almost any kernel address and
           execute a callback function.  register_kprobe() establishes
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 56832929a543..ce4de61ed85d 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1-git2
-# Thu Jan 19 10:05:21 2006
+# Linux kernel version: 2.6.16-rc3-git9
+# Sat Feb 18 00:27:03 2006
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -21,7 +21,6 @@ CONFIG_DMI=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -267,6 +266,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -446,7 +446,6 @@ CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
@@ -573,7 +572,33 @@ CONFIG_FUSION_MAX_SGE=128
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394_DV1394 is not set
+CONFIG_IEEE1394_RAWIO=y
 
 #
 # I2O device support
@@ -772,6 +797,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -871,6 +897,7 @@ CONFIG_HPET_MMAP=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_HDAPS is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -1101,7 +1128,6 @@ CONFIG_USB_MON=y
 # EDAC - error detection and reporting (RAS)
 #
 # CONFIG_EDAC is not set
-# CONFIG_EDAC_POLL is not set
 
 #
 # Firmware Drivers
@@ -1296,9 +1322,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_FORCED_INLINING is not set
-# CONFIG_UNWIND_INFO is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_INIT_DEBUG=y
 # CONFIG_DEBUG_RODATA is not set
 # CONFIG_IOMMU_DEBUG is not set
 
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 72fe60c20d39..a098a11e7755 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -43,7 +43,7 @@ CFLAGS_vsyscall.o		:= $(PROFILING) -g0
 
 bootflag-y                      += ../../i386/kernel/bootflag.o
 cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../i386/kernel/cpuid.o
-topology-y                     += ../../i386/mach-default/topology.o
+topology-y                     += ../../i386/kernel/topology.o
 microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../i386/kernel/microcode.o
 intel_cacheinfo-y               += ../../i386/kernel/cpu/intel_cacheinfo.o
 quirks-y                        += ../../i386/kernel/quirks.o
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index e4e2b7d01f89..a0f955b9995f 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -248,7 +248,7 @@ void __init iommu_hole_init(void)
                 /* Got the aperture from the AGP bridge */
         } else if (swiotlb && !valid_agp) {
                 /* Do nothing */
-        } else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
+        } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
                    force_iommu ||
                    valid_agp ||
                    fallback_aper_force) { 
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 7a0a3e8d5d72..e5b14c57eaa0 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -1152,6 +1152,7 @@ __setup("noapicmaintimer", setup_noapicmaintimer);
 static __init int setup_apicpmtimer(char *s)
 {
         apic_calibrate_pmtmr = 1;
+        notsc_setup(NULL);
         return setup_apicmaintimer(NULL);
 }
 __setup("apicpmtimer", setup_apicpmtimer);
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index b150c87a08c6..22cb6ee074b9 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -178,6 +178,12 @@ rff_trace:
  * Interrupts are off on entry.
  * Only called from user space.
  *
+ * EM64T CPUs have somewhat weird error reporting for non canonical RIPs in SYSRET. 
+ * We can't handle any exceptions there because the exception handler would
+ * end up running on the user stack which is unsafe. To avoid problems 
+ * any code that might end up with a user touched pt_regs should return
+ * using int_ret_from_syscall.
+ *
  * XXX  if we had a free scratch register we could save the RSP into the stack frame
  *      and report it properly in ps. Unfortunately we haven't.
  */                                     
@@ -254,7 +260,9 @@ sysret_signal:
         xorl %esi,%esi # oldset -> arg2
         call ptregscall_common
 1:      movl $_TIF_NEED_RESCHED,%edi
-        jmp sysret_check
+        /* Stack frame might have been changed. The IRET path does
+           some additional checks to handle this */
+        jmp int_with_check
         
 badsys:
         movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
@@ -280,7 +288,8 @@ tracesys:
         call syscall_trace_leave
         RESTORE_TOP_OF_STACK %rbx
         RESTORE_REST
-        jmp ret_from_sys_call
+        /* Stack frame might have been changed. Use the more careful IRET path */
+        jmp int_ret_from_sys_call
         CFI_ENDPROC
                 
 /* 
@@ -408,25 +417,9 @@ ENTRY(stub_execve)
         CFI_ADJUST_CFA_OFFSET -8
         CFI_REGISTER rip, r11
         SAVE_REST
-        movq %r11, %r15
-        CFI_REGISTER rip, r15
         FIXUP_TOP_OF_STACK %r11
         call sys_execve
-        GET_THREAD_INFO(%rcx)
-        bt $TIF_IA32,threadinfo_flags(%rcx)
-        CFI_REMEMBER_STATE
-        jc exec_32bit
         RESTORE_TOP_OF_STACK %r11
-        movq %r15, %r11
-        CFI_REGISTER rip, r11
-        RESTORE_REST
-        pushq %r11
-        CFI_ADJUST_CFA_OFFSET 8
-        CFI_REL_OFFSET rip, 0
-        ret
-
-exec_32bit:
-        CFI_RESTORE_STATE
         movq %rax,RAX(%rsp)
         RESTORE_REST
         jmp int_ret_from_sys_call
@@ -554,6 +547,7 @@ iret_label:
         /* running with kernel gs */
 bad_iret:
         movq $-9999,%rdi        /* better code? */
+        sti
         jmp do_exit                     
         .previous       
         
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 692c737feddb..02fc7fa0ea28 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -213,6 +213,11 @@ ENTRY(early_idt_handler)
         cmpl $2,early_recursion_flag(%rip)
         jz  1f
         call dump_stack
+#ifdef CONFIG_KALLSYMS  
+        leaq early_idt_ripmsg(%rip),%rdi
+        movq 8(%rsp),%rsi       # get rip again
+        call __print_symbol
+#endif
 1:      hlt
         jmp 1b
 early_recursion_flag:
@@ -220,6 +225,8 @@ early_recursion_flag:
 
 early_idt_msg:
         .asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n"
+early_idt_ripmsg:
+        .asciz "RIP %s\n"
 
 .code32
 ENTRY(no_long_mode)
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 4282d72b2a26..ffed464e6b12 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -30,6 +30,9 @@
 #include <linux/mc146818rtc.h>
 #include <linux/acpi.h>
 #include <linux/sysdev.h>
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
 
 #include <asm/io.h>
 #include <asm/smp.h>
@@ -47,6 +50,8 @@ static int no_timer_check;
 
 int disable_timer_pin_1 __initdata;
 
+int timer_over_8254 __initdata = 1;
+
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
@@ -248,6 +253,20 @@ static int __init enable_ioapic_setup(char *str)
 __setup("noapic", disable_ioapic_setup);
 __setup("apic", enable_ioapic_setup);
 
+static int __init setup_disable_8254_timer(char *s)
+{
+        timer_over_8254 = -1;
+        return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+        timer_over_8254 = 2;
+        return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 #include <asm/pci-direct.h>
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
@@ -260,6 +279,8 @@ __setup("apic", enable_ioapic_setup);
 
    And another hack to disable the IOMMU on VIA chipsets.
 
+   ... and others. Really should move this somewhere else.
+
    Kludge-O-Rama. */
 void __init check_ioapic(void) 
 { 
@@ -304,16 +325,20 @@ void __init check_ioapic(void)
 #endif
                                         /* RED-PEN skip them on mptables too? */
                                         return;
+
+                                /* This should be actually default, but
+                                   for 2.6.16 let's do it for ATI only where
+                                   it's really needed. */
                                 case PCI_VENDOR_ID_ATI:
-                                        if (apic_runs_main_timer != 0)
-                                                break;
+                                        if (timer_over_8254 == 1) {     
+                                                timer_over_8254 = 0;    
                                         printk(KERN_INFO
-             "ATI board detected. Using APIC/PM timer.\n");
-                                        apic_runs_main_timer = 1;
-                                        nohpet = 1;
+                "ATI board detected. Disabling timer routing over 8254.\n");
+                                        }       
                                         return;
                                 } 
 
+
                                 /* No multi-function device? */
                                 type = read_pci_config_byte(num,slot,func,
                                                             PCI_HEADER_TYPE);
@@ -1757,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void)
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
  * fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
  */
 static inline void check_timer(void)
 {
@@ -1779,7 +1806,8 @@ static inline void check_timer(void)
          */
         apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
         init_8259A(1);
-        enable_8259A_irq(0);
+        if (timer_over_8254 > 0)
+                enable_8259A_irq(0);
 
         pin1  = find_isa_irq_pin(0, mp_INT);
         apic1 = find_isa_irq_apic(0, mp_INT);
@@ -1834,7 +1862,7 @@ static inline void check_timer(void)
         }
         printk(" failed.\n");
 
-        if (nmi_watchdog) {
+        if (nmi_watchdog == NMI_IO_APIC) {
                 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
                 nmi_watchdog = 0;
         }
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c
index 89fab51e20f4..25ac8a3faae6 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86_64/kernel/machine_kexec.c
@@ -140,7 +140,7 @@ static void load_segments(void)
                 "\tmovl %0,%%ss\n"
                 "\tmovl %0,%%fs\n"
                 "\tmovl %0,%%gs\n"
-                : : "a" (__KERNEL_DS)
+                : : "a" (__KERNEL_DS) : "memory"
                 );
 }
 
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index dc49bfb6db0a..9013a90b5c2e 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -288,9 +288,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
 
         memcpy(str,mpc->mpc_productid,12);
         str[12]=0;
-        printk(KERN_INFO "Product ID: %s ",str);
+        printk("Product ID: %s ",str);
 
-        printk(KERN_INFO "APIC at: 0x%X\n",mpc->mpc_lapic);
+        printk("APIC at: 0x%X\n",mpc->mpc_lapic);
 
         /* save the local APIC address, it might be non-default */
         if (!acpi_lapic)
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 8be407a1f62d..5bf17e41cd2d 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -236,6 +236,7 @@ static void enable_lapic_nmi_watchdog(void)
 {
         if (nmi_active < 0) {
                 nmi_watchdog = NMI_LOCAL_APIC;
+                touch_nmi_watchdog();
                 setup_apic_nmi_watchdog();
         }
 }
@@ -456,15 +457,17 @@ static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog (void)
 {
-        int i;
+        if (nmi_watchdog > 0) {
+                unsigned cpu;
 
-        /*
-         * Tell other CPUs to reset their alert counters. We cannot
-         * do it ourselves because the alert count increase is not
-         * atomic.
-         */
-        for (i = 0; i < NR_CPUS; i++)
-                per_cpu(nmi_touch, i) = 1;
+                /*
+                 * Tell other CPUs to reset their alert counters. We cannot
+                 * do it ourselves because the alert count increase is not
+                 * atomic.
+                 */
+                for_each_present_cpu (cpu)
+                        per_cpu(nmi_touch, cpu) = 1;
+        }
 
         touch_softlockup_watchdog();
 }
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index dd0718dc178b..0c3f052ba6ce 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -228,11 +228,6 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size
         int mmu = high;
         if (force_iommu) 
                 mmu = 1; 
-        if (no_iommu) { 
-                if (high) 
-                        panic("PCI-DMA: high address but no IOMMU.\n"); 
-                mmu = 0; 
-        }       
         return mmu; 
 }
 
@@ -241,11 +236,6 @@ static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t
         u64 mask = *dev->dma_mask;
         int high = addr + size >= mask;
         int mmu = high;
-        if (no_iommu) { 
-                if (high) 
-                        panic("PCI-DMA: high address but no IOMMU.\n"); 
-                mmu = 0; 
-        }       
         return mmu; 
 }
 
@@ -310,7 +300,7 @@ void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int di
 
         for (i = 0; i < nents; i++) {
                 struct scatterlist *s = &sg[i];
-                if (!s->dma_length)
+                if (!s->dma_length || !s->length)
                         break;
                 dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
         }
@@ -364,6 +354,7 @@ static int __dma_map_cont(struct scatterlist *sg, int start, int stopat,
                 
                 BUG_ON(i > start && s->offset);
                 if (i == start) {
+                        *sout = *s; 
                         sout->dma_address = iommu_bus_base;
                         sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
                         sout->dma_length = s->length;
@@ -390,6 +381,7 @@ static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat,
 {
         if (!need) { 
                 BUG_ON(stopat - start != 1);
+                *sout = sg[start]; 
                 sout->dma_length = sg[start].length; 
                 return 0;
         } 
@@ -632,17 +624,13 @@ static int __init pci_iommu_init(void)
                 (agp_copy_info(agp_bridge, &info) < 0);
 #endif  
 
-        if (swiotlb) { 
-                no_iommu = 1;
+        if (swiotlb)
                 return -1; 
-        } 
-        
+
         if (no_iommu ||
             (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
             !iommu_aperture ||
             (no_agp && init_k8_gatt(&info) < 0)) {
-                no_iommu = 1;
-                no_iommu_init();
                 printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
                 if (end_pfn > MAX_DMA32_PFN) {
                         printk(KERN_ERR "WARNING more than 4GB of memory "
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 9435ab7d6fb8..aa55e3cec665 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -423,6 +423,12 @@ static __init void parse_cmdline_early (char ** cmdline_p)
                 else if(!memcmp(from, "elfcorehdr=", 11))
                         elfcorehdr_addr = memparse(from+11, &from);
 #endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+                else if (!memcmp(from, "additional_cpus=", 16))
+                        setup_additional_cpus(from+16);
+#endif
+
         next_char:
                 c = *(from++);
                 if (!c)
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 67e4e28f4df8..66e98659d077 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -1152,8 +1152,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
         setup_ioapic_dest();
 #endif
 
-        time_init_gtod();
-
         check_nmi_watchdog();
 }
 
@@ -1244,7 +1242,7 @@ void __cpu_die(unsigned int cpu)
         printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
 
-static __init int setup_additional_cpus(char *s)
+__init int setup_additional_cpus(char *s)
 {
         return get_option(&s, &additional_cpus);
 }
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 3c58c30506a1..3080f84bf7b7 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
 extern void i8254_timer_resume(void);
 extern int using_apic_timer;
 
+static char *time_init_gtod(void);
+
 DEFINE_SPINLOCK(rtc_lock);
 DEFINE_SPINLOCK(i8253_lock);
 
@@ -901,6 +903,7 @@ static struct irqaction irq0 = {
 void __init time_init(void)
 {
         char *timename;
+        char *gtod;
 
 #ifdef HPET_HACK_ENABLE_DANGEROUS
         if (!vxtime.hpet_address) {
@@ -945,21 +948,19 @@ void __init time_init(void)
                 timename = "PIT";
         }
 
-        printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
-               vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+        vxtime.mode = VXTIME_TSC;
+        gtod = time_init_gtod();
+
+        printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+               vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
         printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
                 cpu_khz / 1000, cpu_khz % 1000);
-        vxtime.mode = VXTIME_TSC;
         vxtime.quot = (1000000L << 32) / vxtime_hz;
         vxtime.tsc_quot = (1000L << 32) / cpu_khz;
         vxtime.last_tsc = get_cycles_sync();
         setup_irq(0, &irq0);
 
         set_cyc2ns_scale(cpu_khz);
-
-#ifndef CONFIG_SMP
-        time_init_gtod();
-#endif
 }
 
 /*
@@ -981,9 +982,9 @@ __cpuinit int unsynchronized_tsc(void)
 }
 
 /*
- * Decide after all CPUs are booted what mode gettimeofday should use.
+ * Decide what mode gettimeofday should use.
  */
-void __init time_init_gtod(void)
+__init static char *time_init_gtod(void)
 {
         char *timetype;
 
@@ -1011,8 +1012,7 @@ void __init time_init_gtod(void)
                 timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
                 vxtime.mode = VXTIME_TSC;
         }
-
-        printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+        return timetype;
 }
 
 __setup("report_lost_ticks", time_setup);
@@ -1327,8 +1327,7 @@ static int __init nohpet_setup(char *s)
 
 __setup("nohpet", nohpet_setup);
 
-
-static int __init notsc_setup(char *s)
+int __init notsc_setup(char *s)
 {
         notsc = 1;
         return 0;
diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c
index a5663e0bb01c..dd60e71fdba6 100644
--- a/arch/x86_64/mm/k8topology.c
+++ b/arch/x86_64/mm/k8topology.c
@@ -155,7 +155,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
         if (!found)
                 return -1; 
 
-        memnode_shift = compute_hash_shift(nodes, numnodes);
+        memnode_shift = compute_hash_shift(nodes, 8);
         if (memnode_shift < 0) { 
                 printk(KERN_ERR "No NUMA node hash function found. Contact maintainer\n"); 
                 return -1; 
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index 6ef9f9a76235..22e51beee8d3 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -351,7 +351,7 @@ void __init init_cpu_to_node(void)
                         continue;
                 if (apicid_to_node[apicid] == NUMA_NO_NODE)
                         continue;
-                cpu_to_node[i] = apicid_to_node[apicid];
+                numa_set_node(i,apicid_to_node[apicid]);
         }
 }
 
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index cd25300726fc..482c25767369 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -228,7 +228,8 @@ static int nodes_cover_memory(void)
         }
 
         e820ram = end_pfn - e820_hole_size(0, end_pfn);
-        if (pxmram < e820ram) {
+        /* We seem to lose 3 pages somewhere. Allow a bit of slack. */
+        if ((long)(e820ram - pxmram) >= 1*1024*1024) {
                 printk(KERN_ERR
         "SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n",
                         (pxmram << PAGE_SHIFT) >> 20,
@@ -270,7 +271,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
                 return -1;
         }
 
-        memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed));
+        memnode_shift = compute_hash_shift(nodes, MAX_NUMNODES);
         if (memnode_shift < 0) {
                 printk(KERN_ERR
                      "SRAT: No NUMA node hash function found. Contact maintainer\n");