1 files changed, 172 insertions, 78 deletions

diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index ec13eb97e8e6..31c0f2e6ac91 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -33,6 +33,7 @@
 #include <asm/msr.h>
 #include <asm/proto.h>
 #include <asm/kdebug.h>
+#include <asm/local.h>
 
 /*
  * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
@@ -59,7 +60,8 @@ int panic_on_timeout;
 
 unsigned int nmi_watchdog = NMI_DEFAULT;
 static unsigned int nmi_hz = HZ;
-unsigned int nmi_perfctr_msr;   /* the MSR to reset in NMI handler */
+static unsigned int nmi_perfctr_msr;    /* the MSR to reset in NMI handler */
+static unsigned int nmi_p4_cccr_val;
 
 /* Note that these events don't tick when the CPU idles. This means
    the frequency varies with CPU load. */
@@ -71,67 +73,87 @@ unsigned int nmi_perfctr_msr;	/* the MSR to reset in NMI handler */
 #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING    0x76
 #define K7_NMI_EVENT            K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
 
-#define P6_EVNTSEL0_ENABLE      (1 << 22)
-#define P6_EVNTSEL_INT          (1 << 20)
-#define P6_EVNTSEL_OS           (1 << 17)
-#define P6_EVNTSEL_USR          (1 << 16)
-#define P6_EVENT_CPU_CLOCKS_NOT_HALTED  0x79
-#define P6_NMI_EVENT            P6_EVENT_CPU_CLOCKS_NOT_HALTED
+#define MSR_P4_MISC_ENABLE      0x1A0
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL   (1<<7)
+#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
+#define MSR_P4_PERFCTR0         0x300
+#define MSR_P4_CCCR0            0x360
+#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
+#define P4_ESCR_OS              (1<<3)
+#define P4_ESCR_USR             (1<<2)
+#define P4_CCCR_OVF_PMI0        (1<<26)
+#define P4_CCCR_OVF_PMI1        (1<<27)
+#define P4_CCCR_THRESHOLD(N)    ((N)<<20)
+#define P4_CCCR_COMPLEMENT      (1<<19)
+#define P4_CCCR_COMPARE         (1<<18)
+#define P4_CCCR_REQUIRED        (3<<16)
+#define P4_CCCR_ESCR_SELECT(N)  ((N)<<13)
+#define P4_CCCR_ENABLE          (1<<12)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+   CRU_ESCR0 (with any non-null event selector) through a complemented
+   max threshold. [IA32-Vol3, Section 14.9.9] */
+#define MSR_P4_IQ_COUNTER0      0x30C
+#define P4_NMI_CRU_ESCR0        (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
+#define P4_NMI_IQ_CCCR0 \
+        (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|     \
+         P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+
+static __init inline int nmi_known_cpu(void)
+{
+        switch (boot_cpu_data.x86_vendor) {
+        case X86_VENDOR_AMD:
+                return boot_cpu_data.x86 == 15;
+        case X86_VENDOR_INTEL:
+                return boot_cpu_data.x86 == 15;
+        }
+        return 0;
+}
 
 /* Run after command line and cpu_init init, but before all other checks */
 void __init nmi_watchdog_default(void)
 {
         if (nmi_watchdog != NMI_DEFAULT)
                 return;
-
-        /* For some reason the IO APIC watchdog doesn't work on the AMD
-           8111 chipset. For now switch to local APIC mode using
-           perfctr0 there.  On Intel CPUs we don't have code to handle
-           the perfctr and the IO-APIC seems to work, so use that.  */
-
-        if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
-                nmi_watchdog = NMI_LOCAL_APIC; 
-                printk(KERN_INFO 
-              "Using local APIC NMI watchdog using perfctr0\n");
-        } else {
-                printk(KERN_INFO "Using IO APIC NMI watchdog\n");
+        if (nmi_known_cpu())
+                nmi_watchdog = NMI_LOCAL_APIC;
+        else
                 nmi_watchdog = NMI_IO_APIC;
-        }
 }
 
-/* Why is there no CPUID flag for this? */
-static __init int cpu_has_lapic(void)
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
 {
-        switch (boot_cpu_data.x86_vendor) { 
-        case X86_VENDOR_INTEL:
-        case X86_VENDOR_AMD: 
-                return boot_cpu_data.x86 >= 6; 
-        /* .... add more cpus here or find a different way to figure this out. */       
-        default:
-                return 0;
-        }       
+        volatile int *endflag = data;
+        local_irq_enable();
+        /* Intentionally don't use cpu_relax here. This is
+           to make sure that the performance counter really ticks,
+           even if there is a simulator or similar that catches the
+           pause instruction. On a real HT machine this is fine because
+           all other CPUs are busy with "useless" delay loops and don't
+           care if they get somewhat less cycles. */
+        while (*endflag == 0)
+                barrier();
 }
+#endif
 
-static int __init check_nmi_watchdog (void)
+int __init check_nmi_watchdog (void)
 {
+        volatile int endflag = 0;
         int *counts;
         int cpu;
 
-        if (nmi_watchdog == NMI_NONE)
-                return 0;
+        counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+        if (!counts)
+                return -1;
 
-        if (nmi_watchdog == NMI_LOCAL_APIC && !cpu_has_lapic())  {
-                nmi_watchdog = NMI_NONE;
-                return -1; 
-        }       
+        printk(KERN_INFO "testing NMI watchdog ... ");
 
-        counts = kmalloc(NR_CPUS * sizeof(int),GFP_KERNEL);
-        if (!counts) {
-                nmi_watchdog = NMI_NONE;
-                return 0;
-        }
-
-        printk(KERN_INFO "Testing NMI watchdog ... ");
+        if (nmi_watchdog == NMI_LOCAL_APIC)
+                smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
 
         for (cpu = 0; cpu < NR_CPUS; cpu++)
                 counts[cpu] = cpu_pda[cpu].__nmi_count; 
@@ -139,16 +161,22 @@ static int __init check_nmi_watchdog (void)
         mdelay((10*1000)/nmi_hz); // wait 10 ticks
 
         for (cpu = 0; cpu < NR_CPUS; cpu++) {
+                if (!cpu_online(cpu))
+                        continue;
                 if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) {
-                        printk("CPU#%d: NMI appears to be stuck (%d)!\n", 
+                        endflag = 1;
+                        printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
                                cpu,
+                               counts[cpu],
                                cpu_pda[cpu].__nmi_count);
                         nmi_active = 0;
                         lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+                        nmi_perfctr_msr = 0;
                         kfree(counts);
                         return -1;
                 }
         }
+        endflag = 1;
         printk("OK.\n");
 
         /* now that we know it works we can reduce NMI frequency to
@@ -159,8 +187,6 @@ static int __init check_nmi_watchdog (void)
         kfree(counts);
         return 0;
 }
-/* Have this called later during boot so counters are updating */
-late_initcall(check_nmi_watchdog);
 
 int __init setup_nmi_watchdog(char *str)
 {
@@ -178,7 +204,7 @@ int __init setup_nmi_watchdog(char *str)
 
         if (nmi >= NMI_INVALID)
                 return 0;
-                nmi_watchdog = nmi;
+        nmi_watchdog = nmi;
         return 1;
 }
 
@@ -193,7 +219,10 @@ static void disable_lapic_nmi_watchdog(void)
                 wrmsr(MSR_K7_EVNTSEL0, 0, 0);
                 break;
         case X86_VENDOR_INTEL:
-                wrmsr(MSR_IA32_EVNTSEL0, 0, 0);
+                if (boot_cpu_data.x86 == 15) {
+                        wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
+                        wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
+                }
                 break;
         }
         nmi_active = -1;
@@ -261,7 +290,7 @@ void enable_timer_nmi_watchdog(void)
 
 static int nmi_pm_active; /* nmi_active before suspend */
 
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
+static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
 {
         nmi_pm_active = nmi_active;
         disable_lapic_nmi_watchdog();
@@ -308,22 +337,27 @@ late_initcall(init_lapic_nmi_sysfs);
  * Original code written by Keith Owens.
  */
 
+static void clear_msr_range(unsigned int base, unsigned int n)
+{
+        unsigned int i;
+
+        for(i = 0; i < n; ++i)
+                wrmsr(base+i, 0, 0);
+}
+
 static void setup_k7_watchdog(void)
 {
         int i;
         unsigned int evntsel;
 
-        /* No check, so can start with slow frequency */
-        nmi_hz = 1; 
-
-        /* XXX should check these in EFER */
-
         nmi_perfctr_msr = MSR_K7_PERFCTR0;
 
         for(i = 0; i < 4; ++i) {
                 /* Simulator may not support it */
-                if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL))
+                if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) {
+                        nmi_perfctr_msr = 0;
                         return;
+                }
                 wrmsrl(MSR_K7_PERFCTR0+i, 0UL);
         }
 
@@ -333,12 +367,54 @@ static void setup_k7_watchdog(void)
                 | K7_NMI_EVENT;
 
         wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
-        wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz*1000) / nmi_hz);
+        wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1);
         apic_write(APIC_LVTPC, APIC_DM_NMI);
         evntsel |= K7_EVNTSEL_ENABLE;
         wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
 }
 
+
+static int setup_p4_watchdog(void)
+{
+        unsigned int misc_enable, dummy;
+
+        rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+        if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+                return 0;
+
+        nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
+        nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
+#ifdef CONFIG_SMP
+        if (smp_num_siblings == 2)
+                nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+#endif
+
+        if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
+                clear_msr_range(0x3F1, 2);
+        /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
+           docs doesn't fully define it, so leave it alone for now. */
+        if (boot_cpu_data.x86_model >= 0x3) {
+                /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
+                clear_msr_range(0x3A0, 26);
+                clear_msr_range(0x3BC, 3);
+        } else {
+                clear_msr_range(0x3A0, 31);
+        }
+        clear_msr_range(0x3C0, 6);
+        clear_msr_range(0x3C8, 6);
+        clear_msr_range(0x3E0, 2);
+        clear_msr_range(MSR_P4_CCCR0, 18);
+        clear_msr_range(MSR_P4_PERFCTR0, 18);
+
+        wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
+        wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
+        Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000));
+        wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1);
+        apic_write(APIC_LVTPC, APIC_DM_NMI);
+        wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+        return 1;
+}
+
 void setup_apic_nmi_watchdog(void)
 {
         switch (boot_cpu_data.x86_vendor) {
@@ -349,6 +425,13 @@ void setup_apic_nmi_watchdog(void)
                         return;
                 setup_k7_watchdog();
                 break;
+        case X86_VENDOR_INTEL:
+                if (boot_cpu_data.x86 != 15)
+                        return;
+                if (!setup_p4_watchdog())
+                        return;
+                break;
+
         default:
                 return;
         }
@@ -363,56 +446,67 @@ void setup_apic_nmi_watchdog(void)
  *
  * as these watchdog NMI IRQs are generated on every CPU, we only
  * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- *  here too!]
  */
 
-static unsigned int
-        last_irq_sums [NR_CPUS],
-        alert_counter [NR_CPUS];
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog (void)
 {
         int i;
 
         /*
-         * Just reset the alert counters, (other CPUs might be
-         * spinning on locks we hold):
+         * Tell other CPUs to reset their alert counters. We cannot
+         * do it ourselves because the alert count increase is not
+         * atomic.
          */
         for (i = 0; i < NR_CPUS; i++)
-                alert_counter[i] = 0;
+                per_cpu(nmi_touch, i) = 1;
 }
 
 void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason)
 {
-        int sum, cpu;
+        int sum;
+        int touched = 0;
 
-        cpu = safe_smp_processor_id();
         sum = read_pda(apic_timer_irqs);
-        if (last_irq_sums[cpu] == sum) {
+        if (__get_cpu_var(nmi_touch)) {
+                __get_cpu_var(nmi_touch) = 0;
+                touched = 1;
+        }
+        if (!touched && __get_cpu_var(last_irq_sum) == sum) {
                 /*
                  * Ayiee, looks like this CPU is stuck ...
                  * wait a few IRQs (5 seconds) before doing the oops ...
                  */
-                alert_counter[cpu]++;
-                if (alert_counter[cpu] == 5*nmi_hz) {
+                local_inc(&__get_cpu_var(alert_counter));
+                if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) {
                         if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
                                                         == NOTIFY_STOP) {
-                                alert_counter[cpu] = 0; 
+                                local_set(&__get_cpu_var(alert_counter), 0);
                                 return;
                         } 
                         die_nmi("NMI Watchdog detected LOCKUP on CPU%d", regs);
                 }
         } else {
-                last_irq_sums[cpu] = sum;
-                alert_counter[cpu] = 0;
+                __get_cpu_var(last_irq_sum) = sum;
+                local_set(&__get_cpu_var(alert_counter), 0);
         }
-        if (nmi_perfctr_msr)
+        if (nmi_perfctr_msr) {
+                if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
+                        /*
+                         * P4 quirks:
+                         * - An overflown perfctr will assert its interrupt
+                         *   until the OVF flag in its CCCR is cleared.
+                         * - LVTPC is masked on interrupt and must be
+                         *   unmasked by the LVTPC handler.
+                         */
+                        wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+                        apic_write(APIC_LVTPC, APIC_DM_NMI);
+                }
                 wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
+        }
 }
 
 static int dummy_nmi_callback(struct pt_regs * regs, int cpu)