15 files changed, 847 insertions, 126 deletions

diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index b859047a6376..2a1516efb542 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -11,5 +11,6 @@ pci-y				+= legacy.o irq.o
 
 pci-$(CONFIG_X86_VISWS)         := visws.o fixup.o
 pci-$(CONFIG_X86_NUMAQ)         := numa.o irq.o
+pci-$(CONFIG_NUMA)              += mp_bus_to_node.o
 
 obj-y                           += $(pci-y) common.o early.o
diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64
index 7d8c467bf143..8fbd19832cf6 100644
--- a/arch/x86/pci/Makefile_64
+++ b/arch/x86/pci/Makefile_64
@@ -13,5 +13,5 @@ obj-y			+= legacy.o irq.o common.o early.o
 # mmconfig has a 64bit special
 obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
 
-obj-$(CONFIG_NUMA)      += k8-bus_64.o
+obj-y           += k8-bus_64.o
 
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 2664cb3fc96c..1a9c0c6a1a18 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -191,7 +191,10 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 {
         struct pci_bus *bus;
         struct pci_sysdata *sd;
+        int node;
+#ifdef CONFIG_ACPI_NUMA
         int pxm;
+#endif
 
         dmi_check_system(acpi_pciprobe_dmi_table);
 
@@ -201,6 +204,17 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
                 return NULL;
         }
 
+        node = -1;
+#ifdef CONFIG_ACPI_NUMA
+        pxm = acpi_get_pxm(device->handle);
+        if (pxm >= 0)
+                node = pxm_to_node(pxm);
+        if (node != -1)
+                set_mp_bus_to_node(busnum, node);
+        else
+                node = get_mp_bus_to_node(busnum);
+#endif
+
         /* Allocate per-root-bus (not per bus) arch-specific data.
          * TODO: leak; this memory is never freed.
          * It's arguable whether it's worth the trouble to care.
@@ -212,13 +226,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
         }
 
         sd->domain = domain;
-        sd->node = -1;
-
-        pxm = acpi_get_pxm(device->handle);
-#ifdef CONFIG_ACPI_NUMA
-        if (pxm >= 0)
-                sd->node = pxm_to_node(pxm);
-#endif
+        sd->node = node;
         /*
          * Maybe the desired pci bus has been already scanned. In such case
          * it is unnecessary to scan the pci bus with the given domain,busnum.
@@ -238,9 +246,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
                 kfree(sd);
 
 #ifdef CONFIG_ACPI_NUMA
-        if (bus != NULL) {
+        if (bus) {
                 if (pxm >= 0) {
-                        printk("bus %d -> pxm %d -> node %d\n",
+                        printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n",
                                 busnum, pxm, pxm_to_node(pxm));
                 }
         }
@@ -248,7 +256,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 
         if (bus && (pci_probe & PCI_USE__CRS))
                 get_current_resources(device, busnum, domain, bus);
-        
         return bus;
 }
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 75fcc29ecf52..2a4d751818b7 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -342,9 +342,14 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
                 return NULL;
         }
 
+        sd->node = get_mp_bus_to_node(busnum);
+
         printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
+        bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+        if (!bus)
+                kfree(sd);
 
-        return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+        return bus;
 }
 
 extern u8 pci_cache_line_size;
@@ -420,6 +425,10 @@ char * __devinit  pcibios_setup(char *str)
                 pci_probe &= ~PCI_PROBE_MMCONF;
                 return NULL;
         }
+        else if (!strcmp(str, "check_enable_amd_mmconf")) {
+                pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
+                return NULL;
+        }
 #endif
         else if (!strcmp(str, "noacpi")) {
                 acpi_noirq_set();
@@ -480,7 +489,7 @@ void pcibios_disable_device (struct pci_dev *dev)
                 pcibios_disable_irq(dev);
 }
 
-struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno)
+struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
 {
         struct pci_bus *bus = NULL;
         struct pci_sysdata *sd;
@@ -495,10 +504,15 @@ struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno)
                 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
                 return NULL;
         }
-        sd->node = -1;
-        bus = pci_scan_bus(busno, &pci_root_ops, sd);
+        sd->node = node;
+        bus = pci_scan_bus(busno, ops, sd);
         if (!bus)
                 kfree(sd);
 
         return bus;
 }
+
+struct pci_bus *pci_scan_bus_with_sysdata(int busno)
+{
+        return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
+}
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 42f3e4cad179..21d1e0e0d535 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -258,7 +258,8 @@ void __init pci_direct_init(int type)
 {
         if (type == 0)
                 return;
-        printk(KERN_INFO "PCI: Using configuration type %d\n", type);
+        printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
+                 type);
         if (type == 1)
                 raw_pci_ops = &pci_direct_conf1;
         else
@@ -275,8 +276,10 @@ int __init pci_direct_probe(void)
         if (!region)
                 goto type2;
 
-        if (pci_check_type1())
+        if (pci_check_type1()) {
+                raw_pci_ops = &pci_direct_conf1;
                 return 1;
+        }
         release_resource(region);
 
  type2:
@@ -290,7 +293,6 @@ int __init pci_direct_probe(void)
                 goto fail2;
 
         if (pci_check_type2()) {
-                printk(KERN_INFO "PCI: Using configuration type 2\n");
                 raw_pci_ops = &pci_direct_conf2;
                 return 2;
         }
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index a5ef5f551373..b60b2abd480c 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -493,3 +493,20 @@ static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
                           pci_siemens_interrupt_controller);
+
+/*
+ * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
+ * have 4096 bytes.  Even if the device is capable, that doesn't mean we can
+ * access it.  Maybe we don't have a way to generate extended config space
+ * accesses.   So check it
+ */
+static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+{
+        dev->cfg_size = pci_cfg_space_size_ext(dev, 0);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 0f5f7dd2a620..dd30c6076b5d 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -6,19 +6,17 @@
    in the right sequence from here. */
 static __init int pci_access_init(void)
 {
-        int type __maybe_unused = 0;
-
 #ifdef CONFIG_PCI_DIRECT
+        int type = 0;
+
         type = pci_direct_probe();
 #endif
-#ifdef CONFIG_PCI_MMCONFIG
-        pci_mmcfg_init(type);
-#endif
+
+        pci_mmcfg_early_init();
+
 #ifdef CONFIG_PCI_OLPC
         pci_olpc_init();
 #endif
-        if (raw_pci_ops)
-                return 0;
 #ifdef CONFIG_PCI_BIOS
         pci_pcbios_init();
 #endif
@@ -31,7 +29,7 @@ static __init int pci_access_init(void)
 #ifdef CONFIG_PCI_DIRECT
         pci_direct_init(type);
 #endif
-        if (!raw_pci_ops)
+        if (!raw_pci_ops && !raw_pci_ext_ops)
                 printk(KERN_ERR
                 "PCI: Fatal: No config space access function found\n");
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 579745ca6b66..0908fca901bf 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -136,9 +136,11 @@ static void __init pirq_peer_trick(void)
                 busmap[e->bus] = 1;
         }
         for(i = 1; i < 256; i++) {
+                int node;
                 if (!busmap[i] || pci_find_bus(0, i))
                         continue;
-                if (pci_scan_bus_with_sysdata(i))
+                node = get_mp_bus_to_node(i);
+                if (pci_scan_bus_on_node(i, &pci_root_ops, node))
                         printk(KERN_INFO "PCI: Discovered primary peer "
                                "bus %02x [IRQ]\n", i);
         }
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c
index 9cc813e29706..ab6d4b18a88f 100644
--- a/arch/x86/pci/k8-bus_64.c
+++ b/arch/x86/pci/k8-bus_64.c
@@ -1,83 +1,536 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <asm/pci-direct.h>
 #include <asm/mpspec.h>
 #include <linux/cpumask.h>
+#include <linux/topology.h>
 
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
- *
- * RED-PEN need to call this again on PCI hotplug
- * RED-PEN empty cpus get reported wrong
+ * also get peer root bus resource for io,mmio
  */
 
-#define NODE_ID_REGISTER 0x60
-#define NODE_ID(dword) (dword & 0x07)
-#define LDT_BUS_NUMBER_REGISTER_0 0x94
-#define LDT_BUS_NUMBER_REGISTER_1 0xB4
-#define LDT_BUS_NUMBER_REGISTER_2 0xD4
-#define NR_LDT_BUS_NUMBER_REGISTERS 3
-#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF)
-#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
-#define PCI_DEVICE_ID_K8HTCONFIG 0x1100
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from root,
+ * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+        char name[12];
+        unsigned int res_num;
+        struct resource res[RES_NUM];
+        int bus_min;
+        int bus_max;
+        int node;
+        int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+static int pci_root_num;
+static struct pci_root_info pci_root_info[PCI_ROOT_NR];
+
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+static int mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+        if (busnum >= 0 &&  busnum < BUS_NR)
+                mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+        int node = -1;
+
+        if (busnum < 0 || busnum > (BUS_NR - 1))
+                return node;
+
+        node = mp_bus_to_node[busnum];
+
+        /*
+         * let numa_node_id to decide it later in dma_alloc_pages
+         * if there is no ram on that node
+         */
+        if (node != -1 && !node_online(node))
+                node = -1;
+
+        return node;
+}
+#endif
+
+void set_pci_bus_resources_arch_default(struct pci_bus *b)
+{
+        int i;
+        int j;
+        struct pci_root_info *info;
+
+        /* if only one root bus, don't need to anything */
+        if (pci_root_num < 2)
+                return;
+
+        for (i = 0; i < pci_root_num; i++) {
+                if (pci_root_info[i].bus_min == b->number)
+                        break;
+        }
+
+        if (i == pci_root_num)
+                return;
+
+        info = &pci_root_info[i];
+        for (j = 0; j < info->res_num; j++) {
+                struct resource *res;
+                struct resource *root;
+
+                res = &info->res[j];
+                b->resource[j] = res;
+                if (res->flags & IORESOURCE_IO)
+                        root = &ioport_resource;
+                else
+                        root = &iomem_resource;
+                insert_resource(root, res);
+        }
+}
+
+#define RANGE_NUM 16
+
+struct res_range {
+        size_t start;
+        size_t end;
+};
+
+static void __init update_range(struct res_range *range, size_t start,
+                                size_t end)
+{
+        int i;
+        int j;
+
+        for (j = 0; j < RANGE_NUM; j++) {
+                if (!range[j].end)
+                        continue;
+
+                if (start <= range[j].start && end >= range[j].end) {
+                        range[j].start = 0;
+                        range[j].end = 0;
+                        continue;
+                }
+
+                if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) {
+                        range[j].start = end + 1;
+                        continue;
+                }
+
+
+                if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) {
+                        range[j].end = start - 1;
+                        continue;
+                }
+
+                if (start > range[j].start && end < range[j].end) {
+                        /* find the new spare */
+                        for (i = 0; i < RANGE_NUM; i++) {
+                                if (range[i].end == 0)
+                                        break;
+                        }
+                        if (i < RANGE_NUM) {
+                                range[i].end = range[j].end;
+                                range[i].start = end + 1;
+                        } else {
+                                printk(KERN_ERR "run of slot in ranges\n");
+                        }
+                        range[j].end = start - 1;
+                        continue;
+                }
+        }
+}
+
+static void __init update_res(struct pci_root_info *info, size_t start,
+                              size_t end, unsigned long flags, int merge)
+{
+        int i;
+        struct resource *res;
+
+        if (!merge)
+                goto addit;
+
+        /* try to merge it with old one */
+        for (i = 0; i < info->res_num; i++) {
+                size_t final_start, final_end;
+                size_t common_start, common_end;
+
+                res = &info->res[i];
+                if (res->flags != flags)
+                        continue;
+
+                common_start = max((size_t)res->start, start);
+                common_end = min((size_t)res->end, end);
+                if (common_start > common_end + 1)
+                        continue;
+
+                final_start = min((size_t)res->start, start);
+                final_end = max((size_t)res->end, end);
+
+                res->start = final_start;
+                res->end = final_end;
+                return;
+        }
+
+addit:
+
+        /* need to add that */
+        if (info->res_num >= RES_NUM)
+                return;
+
+        res = &info->res[info->res_num];
+        res->name = info->name;
+        res->flags = flags;
+        res->start = start;
+        res->end = end;
+        res->child = NULL;
+        info->res_num++;
+}
+
+struct pci_hostbridge_probe {
+        u32 bus;
+        u32 slot;
+        u32 vendor;
+        u32 device;
+};
+
+static struct pci_hostbridge_probe pci_probes[] __initdata = {
+        { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
+        { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
+        { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
+        { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
+};
+
+static u64 __initdata fam10h_mmconf_start;
+static u64 __initdata fam10h_mmconf_end;
+static void __init get_pci_mmcfg_amd_fam10h_range(void)
+{
+        u32 address;
+        u64 base, msr;
+        unsigned segn_busn_bits;
+
+        /* assume all cpus from fam10h have mmconf */
+        if (boot_cpu_data.x86 < 0x10)
+                return;
+
+        address = MSR_FAM10H_MMIO_CONF_BASE;
+        rdmsrl(address, msr);
+
+        /* mmconfig is not enable */
+        if (!(msr & FAM10H_MMIO_CONF_ENABLE))
+                return;
+
+        base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+
+        segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+                         FAM10H_MMIO_CONF_BUSRANGE_MASK;
+
+        fam10h_mmconf_start = base;
+        fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
+}
 
 /**
- * fill_mp_bus_to_cpumask()
+ * early_fill_mp_bus_to_node()
+ * called before pcibios_scan_root and pci_scan_bus
  * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
  * Registers found in the K8 northbridge
  */
-__init static int
-fill_mp_bus_to_cpumask(void)
+static int __init early_fill_mp_bus_info(void)
 {
-        struct pci_dev *nb_dev = NULL;
-        int i, j;
-        u32 ldtbus, nid;
-        static int lbnr[3] = {
-                LDT_BUS_NUMBER_REGISTER_0,
-                LDT_BUS_NUMBER_REGISTER_1,
-                LDT_BUS_NUMBER_REGISTER_2
-        };
-
-        while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-                        PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) {
-                pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid);
-
-                for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {
-                        pci_read_config_dword(nb_dev, lbnr[i], &ldtbus);
-                        /*
-                         * if there are no busses hanging off of the current
-                         * ldt link then both the secondary and subordinate
-                         * bus number fields are set to 0.
-                         * 
-                         * RED-PEN
-                         * This is slightly broken because it assumes
-                         * HT node IDs == Linux node ids, which is not always
-                         * true. However it is probably mostly true.
-                         */
-                        if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
-                                && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
-                                for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
-                                     j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
-                                     j++) { 
-                                        struct pci_bus *bus;
-                                        struct pci_sysdata *sd;
-
-                                        long node = NODE_ID(nid);
-                                        /* Algorithm a bit dumb, but
-                                           it shouldn't matter here */
-                                        bus = pci_find_bus(0, j);
-                                        if (!bus)
-                                                continue;
-                                        if (!node_online(node))
-                                                node = 0;
-
-                                        sd = bus->sysdata;
-                                        sd->node = node;
-                                }               
+        int i;
+        int j;
+        unsigned bus;
+        unsigned slot;
+        int found;
+        int node;
+        int link;
+        int def_node;
+        int def_link;
+        struct pci_root_info *info;
+        u32 reg;
+        struct resource *res;
+        size_t start;
+        size_t end;
+        struct res_range range[RANGE_NUM];
+        u64 val;
+        u32 address;
+
+#ifdef CONFIG_NUMA
+        for (i = 0; i < BUS_NR; i++)
+                mp_bus_to_node[i] = -1;
+#endif
+
+        if (!early_pci_allowed())
+                return -1;
+
+        found = 0;
+        for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
+                u32 id;
+                u16 device;
+                u16 vendor;
+
+                bus = pci_probes[i].bus;
+                slot = pci_probes[i].slot;
+                id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
+
+                vendor = id & 0xffff;
+                device = (id>>16) & 0xffff;
+                if (pci_probes[i].vendor == vendor &&
+                    pci_probes[i].device == device) {
+                        found = 1;
+                        break;
+                }
+        }
+
+        if (!found)
+                return 0;
+
+        pci_root_num = 0;
+        for (i = 0; i < 4; i++) {
+                int min_bus;
+                int max_bus;
+                reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
+
+                /* Check if that register is enabled for bus range */
+                if ((reg & 7) != 3)
+                        continue;
+
+                min_bus = (reg >> 16) & 0xff;
+                max_bus = (reg >> 24) & 0xff;
+                node = (reg >> 4) & 0x07;
+#ifdef CONFIG_NUMA
+                for (j = min_bus; j <= max_bus; j++)
+                        mp_bus_to_node[j] = (unsigned char) node;
+#endif
+                link = (reg >> 8) & 0x03;
+
+                info = &pci_root_info[pci_root_num];
+                info->bus_min = min_bus;
+                info->bus_max = max_bus;
+                info->node = node;
+                info->link = link;
+                sprintf(info->name, "PCI Bus #%02x", min_bus);
+                pci_root_num++;
+        }
+
+        /* get the default node and link for left over res */
+        reg = read_pci_config(bus, slot, 0, 0x60);
+        def_node = (reg >> 8) & 0x07;
+        reg = read_pci_config(bus, slot, 0, 0x64);
+        def_link = (reg >> 8) & 0x03;
+
+        memset(range, 0, sizeof(range));
+        range[0].end = 0xffff;
+        /* io port resource */
+        for (i = 0; i < 4; i++) {
+                reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3));
+                if (!(reg & 3))
+                        continue;
+
+                start = reg & 0xfff000;
+                reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3));
+                node = reg & 0x07;
+                link = (reg >> 4) & 0x03;
+                end = (reg & 0xfff000) | 0xfff;
+
+                /* find the position */
+                for (j = 0; j < pci_root_num; j++) {
+                        info = &pci_root_info[j];
+                        if (info->node == node && info->link == link)
+                                break;
+                }
+                if (j == pci_root_num)
+                        continue; /* not found */
+
+                info = &pci_root_info[j];
+                printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
+                       node, link, (u64)start, (u64)end);
+
+                /* kernel only handle 16 bit only */
+                if (end > 0xffff)
+                        end = 0xffff;
+                update_res(info, start, end, IORESOURCE_IO, 1);
+                update_range(range, start, end);
+        }
+        /* add left over io port range to def node/link, [0, 0xffff] */
+        /* find the position */
+        for (j = 0; j < pci_root_num; j++) {
+                info = &pci_root_info[j];
+                if (info->node == def_node && info->link == def_link)
+                        break;
+        }
+        if (j < pci_root_num) {
+                info = &pci_root_info[j];
+                for (i = 0; i < RANGE_NUM; i++) {
+                        if (!range[i].end)
+                                continue;
+
+                        update_res(info, range[i].start, range[i].end,
+                                   IORESOURCE_IO, 1);
+                }
+        }
+
+        memset(range, 0, sizeof(range));
+        /* 0xfd00000000-0xffffffffff for HT */
+        range[0].end = (0xfdULL<<32) - 1;
+
+        /* need to take out [0, TOM) for RAM*/
+        address = MSR_K8_TOP_MEM1;
+        rdmsrl(address, val);
+        end = (val & 0xffffff8000000ULL);
+        printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
+        if (end < (1ULL<<32))
+                update_range(range, 0, end - 1);
+
+        /* get mmconfig */
+        get_pci_mmcfg_amd_fam10h_range();
+        /* need to take out mmconf range */
+        if (fam10h_mmconf_end) {
+                printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
+                update_range(range, fam10h_mmconf_start, fam10h_mmconf_end);
+        }
+
+        /* mmio resource */
+        for (i = 0; i < 8; i++) {
+                reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
+                if (!(reg & 3))
+                        continue;
+
+                start = reg & 0xffffff00; /* 39:16 on 31:8*/
+                start <<= 8;
+                reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
+                node = reg & 0x07;
+                link = (reg >> 4) & 0x03;
+                end = (reg & 0xffffff00);
+                end <<= 8;
+                end |= 0xffff;
+
+                /* find the position */
+                for (j = 0; j < pci_root_num; j++) {
+                        info = &pci_root_info[j];
+                        if (info->node == node && info->link == link)
+                                break;
+                }
+                if (j == pci_root_num)
+                        continue; /* not found */
+
+                info = &pci_root_info[j];
+
+                printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
+                       node, link, (u64)start, (u64)end);
+                /*
+                 * some sick allocation would have range overlap with fam10h
+                 * mmconf range, so need to update start and end.
+                 */
+                if (fam10h_mmconf_end) {
+                        int changed = 0;
+                        u64 endx = 0;
+                        if (start >= fam10h_mmconf_start &&
+                            start <= fam10h_mmconf_end) {
+                                start = fam10h_mmconf_end + 1;
+                                changed = 1;
+                        }
+
+                        if (end >= fam10h_mmconf_start &&
+                            end <= fam10h_mmconf_end) {
+                                end = fam10h_mmconf_start - 1;
+                                changed = 1;
+                        }
+
+                        if (start < fam10h_mmconf_start &&
+                            end > fam10h_mmconf_end) {
+                                /* we got a hole */
+                                endx = fam10h_mmconf_start - 1;
+                                update_res(info, start, endx, IORESOURCE_MEM, 0);
+                                update_range(range, start, endx);
+                                printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx);
+                                start = fam10h_mmconf_end + 1;
+                                changed = 1;
+                        }
+                        if (changed) {
+                                if (start <= end) {
+                                        printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end);
+                                } else {
+                                        printk(KERN_CONT "%s\n", endx?"":" ==> none");
+                                        continue;
+                                }
                         }
                 }
+
+                update_res(info, start, end, IORESOURCE_MEM, 1);
+                update_range(range, start, end);
+                printk(KERN_CONT "\n");
+        }
+
+        /* need to take out [4G, TOM2) for RAM*/
+        /* SYS_CFG */
+        address = MSR_K8_SYSCFG;
+        rdmsrl(address, val);
+        /* TOP_MEM2 is enabled? */
+        if (val & (1<<21)) {
+                /* TOP_MEM2 */
+                address = MSR_K8_TOP_MEM2;
+                rdmsrl(address, val);
+                end = (val & 0xffffff8000000ULL);
+                printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
+                update_range(range, 1ULL<<32, end - 1);
+        }
+
+        /*
+         * add left over mmio range to def node/link ?
+         * that is tricky, just record range in from start_min to 4G
+         */
+        for (j = 0; j < pci_root_num; j++) {
+                info = &pci_root_info[j];
+                if (info->node == def_node && info->link == def_link)
+                        break;
+        }
+        if (j < pci_root_num) {
+                info = &pci_root_info[j];
+
+                for (i = 0; i < RANGE_NUM; i++) {
+                        if (!range[i].end)
+                                continue;
+
+                        update_res(info, range[i].start, range[i].end,
+                                   IORESOURCE_MEM, 1);
+                }
+        }
+
+#ifdef CONFIG_NUMA
+        for (i = 0; i < BUS_NR; i++) {
+                node = mp_bus_to_node[i];
+                if (node >= 0)
+                        printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node);
+        }
+#endif
+
+        for (i = 0; i < pci_root_num; i++) {
+                int res_num;
+                int busnum;
+
+                info = &pci_root_info[i];
+                res_num = info->res_num;
+                busnum = info->bus_min;
+                printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
+                       info->bus_min, info->bus_max, info->node, info->link);
+                for (j = 0; j < res_num; j++) {
+                        res = &info->res[j];
+                        printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
+                               busnum, j,
+                               (res->flags & IORESOURCE_IO)?"io port":"mmio",
+                               res->start, res->end);
+                }
         }
 
         return 0;
 }
 
-fs_initcall(fill_mp_bus_to_cpumask);
+postcore_initcall(early_fill_mp_bus_info);
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index e041ced0ce13..a67921ce60af 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -12,6 +12,7 @@
 static void __devinit pcibios_fixup_peer_bridges(void)
 {
         int n, devfn;
+        long node;
 
         if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
                 return;
@@ -21,12 +22,13 @@ static void __devinit pcibios_fixup_peer_bridges(void)
                 u32 l;
                 if (pci_find_bus(0, n))
                         continue;
+                node = get_mp_bus_to_node(n);
                 for (devfn = 0; devfn < 256; devfn += 8) {
                         if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
                             l != 0x0000 && l != 0xffff) {
                                 DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
                                 printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-                                pci_scan_bus_with_sysdata(n);
+                                pci_scan_bus_on_node(n, &pci_root_ops, node);
                                 break;
                         }
                 }
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 8d54df4dfaad..0cfebecf2a8f 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -28,7 +28,7 @@ static int __initdata pci_mmcfg_resources_inserted;
 static const char __init *pci_mmcfg_e7520(void)
 {
         u32 win;
-        pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
+        raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win);
 
         win = win & 0xf000;
         if(win == 0x0000 || win == 0xf000)
@@ -53,7 +53,7 @@ static const char __init *pci_mmcfg_intel_945(void)
 
         pci_mmcfg_config_num = 1;
 
-        pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
+        raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar);
 
         /* Enable bit */
         if (!(pciexbar & 1))
@@ -100,33 +100,102 @@ static const char __init *pci_mmcfg_intel_945(void)
         return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
 }
 
+static const char __init *pci_mmcfg_amd_fam10h(void)
+{
+        u32 low, high, address;
+        u64 base, msr;
+        int i;
+        unsigned segnbits = 0, busnbits;
+
+        if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
+                return NULL;
+
+        address = MSR_FAM10H_MMIO_CONF_BASE;
+        if (rdmsr_safe(address, &low, &high))
+                return NULL;
+
+        msr = high;
+        msr <<= 32;
+        msr |= low;
+
+        /* mmconfig is not enable */
+        if (!(msr & FAM10H_MMIO_CONF_ENABLE))
+                return NULL;
+
+        base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+
+        busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+                         FAM10H_MMIO_CONF_BUSRANGE_MASK;
+
+        /*
+         * only handle bus 0 ?
+         * need to skip it
+         */
+        if (!busnbits)
+                return NULL;
+
+        if (busnbits > 8) {
+                segnbits = busnbits - 8;
+                busnbits = 8;
+        }
+
+        pci_mmcfg_config_num = (1 << segnbits);
+        pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) *
+                                   pci_mmcfg_config_num, GFP_KERNEL);
+        if (!pci_mmcfg_config)
+                return NULL;
+
+        for (i = 0; i < (1 << segnbits); i++) {
+                pci_mmcfg_config[i].address = base + (1<<28) * i;
+                pci_mmcfg_config[i].pci_segment = i;
+                pci_mmcfg_config[i].start_bus_number = 0;
+                pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1;
+        }
+
+        return "AMD Family 10h NB";
+}
+
 struct pci_mmcfg_hostbridge_probe {
+        u32 bus;
+        u32 devfn;
         u32 vendor;
         u32 device;
         const char *(*probe)(void);
 };
 
 static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
-        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
-        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+        { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
+          PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
+        { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL,
+          PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+        { 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD,
+          0x1200, pci_mmcfg_amd_fam10h },
+        { 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD,
+          0x1200, pci_mmcfg_amd_fam10h },
 };
 
 static int __init pci_mmcfg_check_hostbridge(void)
 {
         u32 l;
+        u32 bus, devfn;
         u16 vendor, device;
         int i;
         const char *name;
 
-        pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
-        vendor = l & 0xffff;
-        device = (l >> 16) & 0xffff;
+        if (!raw_pci_ops)
+                return 0;
 
         pci_mmcfg_config_num = 0;
         pci_mmcfg_config = NULL;
         name = NULL;
 
         for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+                bus =  pci_mmcfg_probes[i].bus;
+                devfn = pci_mmcfg_probes[i].devfn;
+                raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
+                vendor = l & 0xffff;
+                device = (l >> 16) & 0xffff;
+
                 if (pci_mmcfg_probes[i].vendor == vendor &&
                     pci_mmcfg_probes[i].device == device)
                         name = pci_mmcfg_probes[i].probe();
@@ -173,9 +242,78 @@ static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
         pci_mmcfg_resources_inserted = 1;
 }
 
-static void __init pci_mmcfg_reject_broken(int type)
+static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
+                                              void *data)
+{
+        struct resource *mcfg_res = data;
+        struct acpi_resource_address64 address;
+        acpi_status status;
+
+        if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) {
+                struct acpi_resource_fixed_memory32 *fixmem32 =
+                        &res->data.fixed_memory32;
+                if (!fixmem32)
+                        return AE_OK;
+                if ((mcfg_res->start >= fixmem32->address) &&
+                    (mcfg_res->end < (fixmem32->address +
+                                      fixmem32->address_length))) {
+                        mcfg_res->flags = 1;
+                        return AE_CTRL_TERMINATE;
+                }
+        }
+        if ((res->type != ACPI_RESOURCE_TYPE_ADDRESS32) &&
+            (res->type != ACPI_RESOURCE_TYPE_ADDRESS64))
+                return AE_OK;
+
+        status = acpi_resource_to_address64(res, &address);
+        if (ACPI_FAILURE(status) ||
+           (address.address_length <= 0) ||
+           (address.resource_type != ACPI_MEMORY_RANGE))
+                return AE_OK;
+
+        if ((mcfg_res->start >= address.minimum) &&
+            (mcfg_res->end < (address.minimum + address.address_length))) {
+                mcfg_res->flags = 1;
+                return AE_CTRL_TERMINATE;
+        }
+        return AE_OK;
+}
+
+static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
+                void *context, void **rv)
+{
+        struct resource *mcfg_res = context;
+
+        acpi_walk_resources(handle, METHOD_NAME__CRS,
+                            check_mcfg_resource, context);
+
+        if (mcfg_res->flags)
+                return AE_CTRL_TERMINATE;
+
+        return AE_OK;
+}
+
+static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+{
+        struct resource mcfg_res;
+
+        mcfg_res.start = start;
+        mcfg_res.end = end;
+        mcfg_res.flags = 0;
+
+        acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
+
+        if (!mcfg_res.flags)
+                acpi_get_devices("PNP0C02", find_mboard_resource, &mcfg_res,
+                                 NULL);
+
+        return mcfg_res.flags;
+}
+
+static void __init pci_mmcfg_reject_broken(int early)
 {
         typeof(pci_mmcfg_config[0]) *cfg;
+        int i;
 
         if ((pci_mmcfg_config_num == 0) ||
             (pci_mmcfg_config == NULL) ||
@@ -184,51 +322,80 @@ static void __init pci_mmcfg_reject_broken(int type)
 
         cfg = &pci_mmcfg_config[0];
 
-        /*
-         * Handle more broken MCFG tables on Asus etc.
-         * They only contain a single entry for bus 0-0.
-         */
-        if (pci_mmcfg_config_num == 1 &&
-            cfg->pci_segment == 0 &&
-            (cfg->start_bus_number | cfg->end_bus_number) == 0) {
-                printk(KERN_ERR "PCI: start and end of bus number is 0. "
-                       "Rejected as broken MCFG.\n");
-                goto reject;
+        for (i = 0; i < pci_mmcfg_config_num; i++) {
+                int valid = 0;
+                u32 size = (cfg->end_bus_number + 1) << 20;
+                cfg = &pci_mmcfg_config[i];
+                printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
+                       "segment %hu buses %u - %u\n",
+                       i, (unsigned long)cfg->address, cfg->pci_segment,
+                       (unsigned int)cfg->start_bus_number,
+                       (unsigned int)cfg->end_bus_number);
+
+                if (!early &&
+                    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
+                        printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
+                               "in ACPI motherboard resources\n",
+                               cfg->address);
+                        valid = 1;
+                }
+
+                if (valid)
+                        continue;
+
+                if (!early)
+                        printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
+                               " reserved in ACPI motherboard resources\n",
+                               cfg->address);
+                /* Don't try to do this check unless configuration
+                   type 1 is available. how about type 2 ?*/
+                if (raw_pci_ops && e820_all_mapped(cfg->address,
+                                                  cfg->address + size - 1,
+                                                  E820_RESERVED)) {
+                        printk(KERN_NOTICE
+                               "PCI: MCFG area at %Lx reserved in E820\n",
+                               cfg->address);
+                        valid = 1;
+                }
+
+                if (!valid)
+                        goto reject;
         }
 
-        /*
-         * Only do this check when type 1 works. If it doesn't work
-         * assume we run on a Mac and always use MCFG
-         */
-        if (type == 1 && !e820_all_mapped(cfg->address,
-                                          cfg->address + MMCONFIG_APER_MIN,
-                                          E820_RESERVED)) {
-                printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
-                       " E820-reserved\n", cfg->address);
-                goto reject;
-        }
         return;
 
 reject:
         printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+        pci_mmcfg_arch_free();
         kfree(pci_mmcfg_config);
         pci_mmcfg_config = NULL;
         pci_mmcfg_config_num = 0;
 }
 
-void __init pci_mmcfg_init(int type)
-{
-        int known_bridge = 0;
+static int __initdata known_bridge;
 
+void __init __pci_mmcfg_init(int early)
+{
+        /* MMCONFIG disabled */
         if ((pci_probe & PCI_PROBE_MMCONF) == 0)
                 return;
 
-        if (type == 1 && pci_mmcfg_check_hostbridge())
-                known_bridge = 1;
+        /* MMCONFIG already enabled */
+        if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
+                return;
+
+        /* for late to exit */
+        if (known_bridge)
+                return;
+
+        if (early) {
+                if (pci_mmcfg_check_hostbridge())
+                        known_bridge = 1;
+        }
 
         if (!known_bridge) {
                 acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
-                pci_mmcfg_reject_broken(type);
+                pci_mmcfg_reject_broken(early);
         }
 
         if ((pci_mmcfg_config_num == 0) ||
@@ -249,6 +416,16 @@ void __init pci_mmcfg_init(int type)
         }
 }
 
+void __init pci_mmcfg_early_init(void)
+{
+        __pci_mmcfg_init(1);
+}
+
+void __init pci_mmcfg_late_init(void)
+{
+        __pci_mmcfg_init(0);
+}
+
 static int __init pci_mmcfg_late_insert_resources(void)
 {
         /*
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index 081816ada057..f3c761dce695 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -136,3 +136,7 @@ int __init pci_mmcfg_arch_init(void)
         raw_pci_ext_ops = &pci_mmcfg;
         return 1;
 }
+
+void __init pci_mmcfg_arch_free(void)
+{
+}
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index 9207fd49233c..a1994163c99d 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -127,7 +127,7 @@ static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
 int __init pci_mmcfg_arch_init(void)
 {
         int i;
-        pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
+        pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) *
                                  pci_mmcfg_config_num, GFP_KERNEL);
         if (pci_mmcfg_virt == NULL) {
                 printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
@@ -141,9 +141,29 @@ int __init pci_mmcfg_arch_init(void)
                         printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
                                         "segment %d\n",
                                 pci_mmcfg_config[i].pci_segment);
+                        pci_mmcfg_arch_free();
                         return 0;
                 }
         }
         raw_pci_ext_ops = &pci_mmcfg;
         return 1;
 }
+
+void __init pci_mmcfg_arch_free(void)
+{
+        int i;
+
+        if (pci_mmcfg_virt == NULL)
+                return;
+
+        for (i = 0; i < pci_mmcfg_config_num; ++i) {
+                if (pci_mmcfg_virt[i].virt) {
+                        iounmap(pci_mmcfg_virt[i].virt);
+                        pci_mmcfg_virt[i].virt = NULL;
+                        pci_mmcfg_virt[i].cfg = NULL;
+                }
+        }
+
+        kfree(pci_mmcfg_virt);
+        pci_mmcfg_virt = NULL;
+}
diff --git a/arch/x86/pci/mp_bus_to_node.c b/arch/x86/pci/mp_bus_to_node.c
new file mode 100644
index 000000000000..022943999b84
--- /dev/null
+++ b/arch/x86/pci/mp_bus_to_node.c
@@ -0,0 +1,23 @@
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/topology.h>
+
+#define BUS_NR 256
+
+static unsigned char mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+        if (busnum >= 0 &&  busnum < BUS_NR)
+        mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+        int node;
+
+        if (busnum < 0 || busnum > (BUS_NR - 1))
+                return 0;
+        node = mp_bus_to_node[busnum];
+        return node;
+}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 7d84e813e958..c58805a92db5 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -26,6 +26,7 @@
 #define PCI_ASSIGN_ALL_BUSSES   0x4000
 #define PCI_CAN_SKIP_ISA_ALIGN  0x8000
 #define PCI_USE__CRS            0x10000
+#define PCI_CHECK_ENABLE_AMD_MMCONF     0x20000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
@@ -97,12 +98,12 @@ extern struct pci_raw_ops pci_direct_conf1;
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
-extern void pci_mmcfg_init(int type);
 extern void pci_olpc_init(void);
 
 /* pci-mmconfig.c */
 
 extern int __init pci_mmcfg_arch_init(void);
+extern void __init pci_mmcfg_arch_free(void);
 
 /*
  * AMD Fam10h CPUs are buggy, and cannot access MMIO config space