1 files changed, 309 insertions, 0 deletions

diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
new file mode 100644
index 000000000000..f317276afa7a
--- /dev/null
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -0,0 +1,309 @@
+/*
+ *      elanfreq:       cpufreq driver for the AMD ELAN family
+ *
+ *      (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ *      Parts of this code are (c) Sven Geggus <sven@geggus.net>
+ *
+ *      All Rights Reserved.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define REG_CSCIR 0x22          /* Chip Setup and Control Index Register    */
+#define REG_CSCDR 0x23          /* Chip Setup and Control Data  Register    */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+        int clock;              /* frequency in kHz                         */
+        int val40h;             /* PMU Force Mode register                  */
+        int val80h;             /* CPU Clock Speed Register                 */
+};
+
+/*
+ * It is important that the frequencies
+ * are listed in ascending order here!
+ */
+struct s_elan_multiplier elan_multiplier[] = {
+        {1000,  0x02,   0x18},
+        {2000,  0x02,   0x10},
+        {4000,  0x02,   0x08},
+        {8000,  0x00,   0x00},
+        {16000, 0x00,   0x02},
+        {33000, 0x00,   0x04},
+        {66000, 0x01,   0x04},
+        {99000, 0x01,   0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+        {0,     1000},
+        {1,     2000},
+        {2,     4000},
+        {3,     8000},
+        {4,     16000},
+        {5,     33000},
+        {6,     66000},
+        {7,     99000},
+        {0,     CPUFREQ_TABLE_END},
+};
+
+
+/**
+ *      elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ *      Finds out at which frequency the CPU of the Elan SOC runs
+ *      at the moment. Frequencies from 1 to 33 MHz are generated
+ *      the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ *      and have the rest of the chip running with 33 MHz.
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+        u8 clockspeed_reg;    /* Clock Speed Register */
+
+        local_irq_disable();
+        outb_p(0x80,REG_CSCIR);
+        clockspeed_reg = inb_p(REG_CSCDR);
+        local_irq_enable();
+
+        if ((clockspeed_reg & 0xE0) == 0xE0)
+                return 0;
+
+        /* Are we in CPU clock multiplied mode (66/99 MHz)? */
+        if ((clockspeed_reg & 0xE0) == 0xC0) {
+                if ((clockspeed_reg & 0x01) == 0)
+                        return 66000;
+                else
+                        return 99000;
+        }
+
+        /* 33 MHz is not 32 MHz... */
+        if ((clockspeed_reg & 0xE0)==0xA0)
+                return 33000;
+
+        return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+}
+
+
+/**
+ *      elanfreq_set_cpu_frequency: Change the CPU core frequency
+ *      @cpu: cpu number
+ *      @freq: frequency in kHz
+ *
+ *      This function takes a frequency value and changes the CPU frequency
+ *      according to this. Note that the frequency has to be checked by
+ *      elanfreq_validatespeed() for correctness!
+ *
+ *      There is no return value.
+ */
+
+static void elanfreq_set_cpu_state (unsigned int state)
+{
+        struct cpufreq_freqs    freqs;
+
+        freqs.old = elanfreq_get_cpu_frequency(0);
+        freqs.new = elan_multiplier[state].clock;
+        freqs.cpu = 0; /* elanfreq.c is UP only driver */
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+        printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
+                        elan_multiplier[state].clock);
+
+
+        /*
+         * Access to the Elan's internal registers is indexed via
+         * 0x22: Chip Setup & Control Register Index Register (CSCI)
+         * 0x23: Chip Setup & Control Register Data  Register (CSCD)
+         *
+         */
+
+        /*
+         * 0x40 is the Power Management Unit's Force Mode Register.
+         * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+         */
+
+        local_irq_disable();
+        outb_p(0x40,REG_CSCIR);         /* Disable hyperspeed mode */
+        outb_p(0x00,REG_CSCDR);
+        local_irq_enable();             /* wait till internal pipelines and */
+        udelay(1000);                   /* buffers have cleaned up          */
+
+        local_irq_disable();
+
+        /* now, set the CPU clock speed register (0x80) */
+        outb_p(0x80,REG_CSCIR);
+        outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+
+        /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+        outb_p(0x40,REG_CSCIR);
+        outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+        udelay(10000);
+        local_irq_enable();
+
+        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+
+/**
+ *      elanfreq_validatespeed: test if frequency range is valid
+ *      @policy: the policy to validate
+ *
+ *      This function checks if a given frequency range in kHz is valid
+ *      for the hardware supported by the driver.
+ */
+
+static int elanfreq_verify (struct cpufreq_policy *policy)
+{
+        return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
+}
+
+static int elanfreq_target (struct cpufreq_policy *policy,
+                            unsigned int target_freq,
+                            unsigned int relation)
+{
+        unsigned int newstate = 0;
+
+        if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
+                return -EINVAL;
+
+        elanfreq_set_cpu_state(newstate);
+
+        return 0;
+}
+
+
+/*
+ *      Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+        unsigned int i;
+        int result;
+
+        /* capability check */
+        if ((c->x86_vendor != X86_VENDOR_AMD) ||
+            (c->x86 != 4) || (c->x86_model!=10))
+                return -ENODEV;
+
+        /* max freq */
+        if (!max_freq)
+                max_freq = elanfreq_get_cpu_frequency(0);
+
+        /* table init */
+        for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+                if (elanfreq_table[i].frequency > max_freq)
+                        elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+        }
+
+        /* cpuinfo and default policy values */
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+        policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+        policy->cur = elanfreq_get_cpu_frequency(0);
+
+        result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
+        if (result)
+                return (result);
+
+        cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
+        return 0;
+}
+
+
+static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter.  Use:
+ *  elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+        max_freq = simple_strtoul(str, &str, 0);
+        printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+        return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct freq_attr* elanfreq_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+
+static struct cpufreq_driver elanfreq_driver = {
+        .get            = elanfreq_get_cpu_frequency,
+        .verify         = elanfreq_verify,
+        .target         = elanfreq_target,
+        .init           = elanfreq_cpu_init,
+        .exit           = elanfreq_cpu_exit,
+        .name           = "elanfreq",
+        .owner          = THIS_MODULE,
+        .attr           = elanfreq_attr,
+};
+
+
+static int __init elanfreq_init(void)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+
+        /* Test if we have the right hardware */
+        if ((c->x86_vendor != X86_VENDOR_AMD) ||
+                (c->x86 != 4) || (c->x86_model!=10)) {
+                printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+                return -ENODEV;
+        }
+        return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void)
+{
+        cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param (max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);